From eb1115ef4e84b90189a50c15af4002e4e7306c01 Mon Sep 17 00:00:00 2001 From: "bubulle@debian.org" <> Date: Sun, 5 Sep 2010 07:54:08 +0200 Subject: Spanish (Omar Campagne). Closes: #595557 --- debian/changelog | 7 + doc/po/es.po | 918 ++++++++++++++++++++----------------------------------- 2 files changed, 335 insertions(+), 590 deletions(-) diff --git a/debian/changelog b/debian/changelog index 229a85d72..66d512599 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,3 +1,10 @@ +apt (0.8.2) UNRELEASED; urgency=low + + [ Manpages translations ] + * Spanish (Omar Campagne). Closes: #595557 + + -- Christian Perrier Sun, 05 Sep 2010 07:53:15 +0200 + apt (0.8.1) unstable; urgency=low [ Programs translations ] diff --git a/doc/po/es.po b/doc/po/es.po index cd945219f..3f07f8776 100644 --- a/doc/po/es.po +++ b/doc/po/es.po @@ -37,15 +37,15 @@ msgid "" msgstr "" "Project-Id-Version: apt 0.7.25\n" "POT-Creation-Date: 2010-07-30 12:46+0300\n" -"PO-Revision-Date: 2010-03-02 18:43+0200\n" -"Last-Translator: Francisco Javier Cuadrado \n" -"Language-Team: Debian Spanish l10n \n" +"PO-Revision-Date: 2010-08-25 03:25+0200\n" +"Last-Translator: Omar Campagne \n" +"Language-Team: Debian l10n Spanish \n" "Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Virtaal 0.5.2\n" +"X-Generator: Virtaal 0.6.1\n" #. type: TH #: apt.8:17 @@ -823,17 +823,7 @@ msgstr "" #. type: Plain text #: apt.ent:264 -#, fuzzy, no-wrap -#| msgid "" -#| " \n" -#| " \n" -#| " \n" -#| " Configuration File; Specify a configuration file to use. \n" -#| " The program will read the default configuration file and then this \n" -#| " configuration file. See &apt-conf; for syntax information. \n" -#| " \n" -#| " \n" -#| " \n" +#, no-wrap msgid "" " \n" " \n" @@ -850,9 +840,14 @@ msgstr "" " \n" " \n" " \n" -" Fichero de configuración: Especifica el fichero de configuración a usar. \n" -" El programa leerá el fichero de configuración predeterminado y, después, este \n" -" fichero de configuración. Consulte &apt-conf; para información sobre la sintaxis. \n" +" Fichero de configuración: Especifica el fichero de \n" +" configuración a usar. \n" +" El programa leerá el fichero de configuración predeterminado y, \n" +" después, este fichero de configuración. Si necesita que ciertas \n" +" opciones de configuración se definan antes que el análisis de los \n" +" de los ficheros de configuración predeterminados, defina un fichero \n" +" con la variable de entorno APT_CONFIG. \n" +" Consulte &apt-conf; para información sobre la sintaxis.\n" " \n" " \n" " \n" @@ -1083,13 +1078,7 @@ msgstr "" #. type: Plain text #: apt.ent:358 -#, fuzzy, no-wrap -#| msgid "" -#| "/etc/apt/sources.list\n" -#| " Locations to fetch packages from.\n" -#| " Configuration Item: Dir::Etc::SourceList.\n" -#| " \n" +#, no-wrap msgid "" "/etc/apt/trusted.gpg\n" @@ -1097,21 +1086,16 @@ msgid "" " Configuration Item: Dir::Etc::Trusted.\n" " \n" msgstr "" -"/etc/apt/sources.list\n" -" Ubicaciones de dónde conseguir los paquetes.\n" -" Opción de configuración: Dir::Etc::SourceList.\n" +"/etc/apt/trusted.gpg\n" +" Registro de claves de las claves locales de confianza,\n" +" las claves nuevas se añadirán aquí.\n" +" Elemento de configuración: Dir::Etc::Trusted.\n" " \n" #. type: Plain text #: apt.ent:365 -#, fuzzy, no-wrap -#| msgid "" -#| " /etc/apt/sources.list.d/\n" -#| " File fragments for locations to fetch packages from.\n" -#| " Configuration Item: Dir::Etc::SourceParts.\n" -#| " \n" -#| "\">\n" +#, no-wrap msgid "" " /etc/apt/trusted.gpg.d/\n" " File fragments for the trusted keys, additional keyrings can\n" @@ -1120,21 +1104,17 @@ msgid "" " \n" "\">\n" msgstr "" -" /etc/apt/sources.list.d/\n" -" Fragmentos de fichero para las ubicaciones de dónde descargar los paquetes.\n" -" Opción de configuración: Dir::Etc::SourceParts.\n" +" /etc/apt/trusted.gpg.d/\n" +" Fragmentos de fichero de claves de confianza, se pueden\n" +" añadir en este directorio registros de claves adicionales (por otros\n" +" paquetes o el administrador.\n" +" Elemento de configuración: Dir::Etc::TrustedParts.\n" " \n" "\">\n" #. type: Plain text #: apt.ent:373 -#, fuzzy, no-wrap -#| msgid "" -#| "/etc/apt/sources.list\n" -#| " Locations to fetch packages from.\n" -#| " Configuration Item: Dir::Etc::SourceList.\n" -#| " \n" +#, no-wrap msgid "" "/var/lib/apt/extended_states\n" @@ -1144,11 +1124,13 @@ msgid "" " \n" "\">\n" msgstr "" -"/etc/apt/sources.list\n" -" Ubicaciones de dónde conseguir los paquetes.\n" -" Opción de configuración: Dir::Etc::SourceList.\n" -" \n" +"/var/lib/apt/extended_states\n" +" Lista de estado de paquetes automáticamente instalados.\n" +" Elemento de configuración: Dir::State::extended_states.\n" +" \n" +" \n" +"\">\n" #. type: Plain text #: apt.ent:377 @@ -1158,6 +1140,9 @@ msgid "" " to the other headers like NAME and DESCRIPTION and should therefore be uppercase. -->\n" "\n" msgstr "" +"\n" +"\n" #. type: Plain text #: apt.ent:386 @@ -1172,6 +1157,16 @@ msgid "" " Debian Dummy l10n Team debian-l10n-dummy@lists.debian.org.\n" "\">\n" msgstr "" +"\n" +"\n" #. type: Plain text #: apt.ent:397 @@ -1188,6 +1183,16 @@ msgid "" " translation is lagging behind the original content.\n" "\">\n" msgstr "" +"\n" +"\n" #. type: Plain text #: apt.ent:400 @@ -1195,6 +1200,8 @@ msgid "" " " msgstr "" +" " #. The last update date #. type: Content of: @@ -1911,67 +1918,46 @@ msgstr "" #. type: Content of: #: apt-cache.8.xml:312 -#, fuzzy -#| msgid "" msgid "" -msgstr "" +msgstr "" #. type: Content of: #: apt-cache.8.xml:313 -#, fuzzy -#| msgid "" msgid "" -msgstr "" +msgstr "" #. type: Content of: #: apt-cache.8.xml:314 -#, fuzzy -#| msgid "" msgid "" -msgstr "" +msgstr "" #. type: Content of: #: apt-cache.8.xml:315 -#, fuzzy -#| msgid "" msgid "" -msgstr "" +msgstr "" #. type: Content of: #: apt-cache.8.xml:316 -#, fuzzy -#| msgid "" msgid "" -msgstr "" +msgstr "" #. type: Content of: #: apt-cache.8.xml:317 -#, fuzzy -#| msgid "" msgid "" -msgstr "" +msgstr "" #. type: Content of: #: apt-cache.8.xml:318 -#, fuzzy -#| msgid "" msgid "" -msgstr "" +msgstr "" #. type: Content of: #: apt-cache.8.xml:319 -#, fuzzy -#| msgid "" msgid "" -msgstr "" +msgstr "" #. type: Content of: #: apt-cache.8.xml:320 -#, fuzzy -#| msgid "" -#| "Make depends and rdepends recursive " -#| "so that all packages mentioned are printed once. Configuration Item: " -#| "APT::Cache::RecurseDepends." msgid "" "Per default the depends and rdepends " "print all dependencies. This can be twicked with these flags which will omit " @@ -1979,9 +1965,12 @@ msgid "" "ShowDependencyType e.g. APT::" "Cache::ShowRecommends." msgstr "" -"Hace que depends y rdepends sean " -"recursivos de modo que todos los paquetes mencionados se muestran sólo una " -"vez. Opción de configuración APT::Cache::RecurseDepends." +"Por omisión, depends y rdepends " +"muestran todas las dependencias. Este comportamiento se puede modificar con " +"los siguientes parámetros, los cuales omitirán el tipo de dependencia " +"especificado. Elemento de configuración: APT::Cache::" +"ShowTipo-de Dependencia. Por ejemplo, " +"APT::Cache::ShowRecommends." #. type: Content of: #: apt-cache.8.xml:326 apt-cdrom.8.xml:121 apt-get.8.xml:319 @@ -2232,13 +2221,6 @@ msgstr "add" #. type: Content of: #: apt-cdrom.8.xml:66 -#, fuzzy -#| msgid "" -#| "add is used to add a new disc to the source list. It " -#| "will unmount the CDROM device, prompt for a disk to be inserted and then " -#| "procceed to scan it and copy the index files. If the disc does not have a " -#| "proper disk directory you will be prompted for a " -#| "descriptive title." msgid "" "add is used to add a new disc to the source list. It will " "unmount the CDROM device, prompt for a disk to be inserted and then proceed " @@ -2670,27 +2652,6 @@ msgstr "Herramienta para generar ficheros de índice" #. type: Content of: #: apt-ftparchive.1.xml:36 -#, fuzzy -#| msgid "" -#| "apt-ftparchive " -#| " " -#| " " -#| " packagespathoverridepathprefix " -#| "sourcespathoverridepathprefix " -#| "contents path release path generate config-file section clean config-file " msgid "" "apt-ftparchive " " " @@ -2714,22 +2675,23 @@ msgstr "" "apt-ftparchive " " " " " "packagesrutaalternativoprefijo-de-la-ruta sourcesrutaalternativoprefijo-de-la-ruta contents ruta release ruta generate fichero-de-configuración sección " -"clean fichero-de-configuración " +"replaceable>fichero-alternativoprefijo-ruta " +"sourcesrutafichero-alternativoprefijo-ruta " +"contents ruta release ruta generate fichero-" +"configuración sección clean fichero-configuración " #. type: Content of: #: apt-ftparchive.1.xml:57 @@ -2875,16 +2837,6 @@ msgstr "" #. type: Content of: #: apt-ftparchive.1.xml:119 -#, fuzzy -#| msgid "" -#| "Values for the additional metadata fields in the Release file are taken " -#| "from the corresponding variables under APT::FTPArchive::Release, e.g. APT::FTPArchive::Release::Origin. The " -#| "supported fields are: Origin, Label, Suite, Version, " -#| "Codename, Date, " -#| "Architectures, Components, " -#| "Description." msgid "" "Values for the additional metadata fields in the Release file are taken from " "the corresponding variables under APT::FTPArchive::Release. Los campos permitidos son: Origin, " "Label, Suite, Version, Codename, Date, " -"Architectures, Components, " -"Description." +"Valid-Until, Architectures, " +"Components y Description." #. type: Content of: #: apt-ftparchive.1.xml:130 @@ -3132,23 +3084,17 @@ msgstr "" #. type: Content of: #: apt-ftparchive.1.xml:229 -#, fuzzy -#| msgid "Contents::Compress" msgid "Translation::Compress" -msgstr "Contents::Compress" +msgstr "Translation::Compress" #. type: Content of: #: apt-ftparchive.1.xml:231 -#, fuzzy -#| msgid "" -#| "This is similar to Packages::Compress except that it " -#| "controls the compression for the Contents files." msgid "" "This is similar to Packages::Compress except that it " "controls the compression for the Translation-en master file." msgstr "" "Esta opción es similar a Packages::Compress excepto que " -"controla la compresión para los ficheros «Contents»." +"controla la compresión para el fichero maestro Translation-en." #. type: Content of: #: apt-ftparchive.1.xml:235 @@ -3183,10 +3129,8 @@ msgstr "" #. type: Content of: #: apt-ftparchive.1.xml:249 apt-ftparchive.1.xml:395 -#, fuzzy -#| msgid "Description" msgid "LongDescription" -msgstr "Descripción" +msgstr "LongDescription" #. type: Content of: #: apt-ftparchive.1.xml:251 apt-ftparchive.1.xml:397 @@ -3194,6 +3138,9 @@ msgid "" "Sets if long descriptions should be included in the Packages file or split " "out into a master Translation-en file." msgstr "" +"Define si se deben incluir las descripciones largas en el fichero " +"«Packages», o si se deben separar, guardándolo en el fichero «Translation-" +"en»." #. type: Content of: #: apt-ftparchive.1.xml:257 @@ -3300,23 +3247,17 @@ msgstr "Sources" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> #: apt-ftparchive.1.xml:302 -#, fuzzy -#| msgid "" -#| "Sets the output Packages file. Defaults to <filename>$(DIST)/$(SECTION)/" -#| "source/Sources</filename>" msgid "" "Sets the output Sources file. Defaults to <filename>$(DIST)/$(SECTION)/" "source/Sources</filename>" msgstr "" -"Define el fichero «Packages» de salida. El valor predeterminado es <filename>" +"Define el fichero «Sources» de salida. El valor predeterminado es <filename>" "$(DIST)/$(SECTION)/source/Sources</filename>" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> #: apt-ftparchive.1.xml:306 -#, fuzzy -#| msgid "Operation" msgid "Translation" -msgstr "Operación" +msgstr "Translation" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> #: apt-ftparchive.1.xml:308 @@ -3325,6 +3266,10 @@ msgid "" "should be not included in the Packages file. Defaults to <filename>$(DIST)/" "$(SECTION)/i18n/Translation-en</filename>" msgstr "" +"Define el fichero maestro «Translation-en» que contiene las descripciones " +"maestras en el caso de que no se deban incluir en el fichero «Packages». El " +"valor predeterminado es <filename>$(DIST)/$(SECTION)/i18n/Translation-en</" +"filename>" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> #: apt-ftparchive.1.xml:313 @@ -3444,12 +3389,6 @@ msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> #: apt-ftparchive.1.xml:364 -#, fuzzy -#| msgid "" -#| "The <literal>Tree</literal> section takes a scope tag which sets the " -#| "<literal>$(DIST)</literal> variable and defines the root of the tree (the " -#| "path is prefixed by <literal>ArchiveDir</literal>). Typically this is a " -#| "setting such as <filename>dists/woody</filename>." msgid "" "The <literal>Tree</literal> section takes a scope tag which sets the " "<literal>$(DIST)</literal> variable and defines the root of the tree (the " @@ -3459,7 +3398,7 @@ msgstr "" "La sección <literal>Tree</literal> toma un ámbito de una etiqueta que define " "la variable <literal>$(DIST)</literal> y la raíz del árbol (a la ruta se le " "añade el prefijo <literal>ArchiveDir</literal>). Normalmente esto es un " -"valor como <filename>dists/woody</filename>." +"valor como <filename>dists/&stable-codename;</filename>." #. type: Content of: <refentry><refsect1><refsect2><para> #: apt-ftparchive.1.xml:369 @@ -3474,34 +3413,28 @@ msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para><programlisting> #: apt-ftparchive.1.xml:375 -#, fuzzy, no-wrap -#| msgid "" -#| "for i in Sections do \n" -#| " for j in Architectures do\n" -#| " Generate for DIST=scope SECTION=i ARCH=j\n" +#, no-wrap msgid "" "for i in Sections do \n" " for j in Architectures do\n" " Generate for DIST=scope SECTION=i ARCH=j\n" " " msgstr "" -"for i in Secciones do \n" -" for j in Arquitecturas do\n" +"for i in Sections do \n" +" for j in Architectures do\n" " Generar con DIST=scope SECTION=i ARCH=j\n" +" " #. type: Content of: <refentry><refsect1><refsect2><para> #: apt-ftparchive.1.xml:372 -#, fuzzy -#| msgid "" -#| "When processing a <literal>Tree</literal> section <command>apt-" -#| "ftparchive</command> performs an operation similar to:" msgid "" "When processing a <literal>Tree</literal> section <command>apt-ftparchive</" "command> performs an operation similar to: <placeholder type=\"programlisting" "\" id=\"0\"/>" msgstr "" "Cuando se procesa una sección <literal>Tree</literal> <command>apt-" -"ftparchive</command> realiza una operación similar a la siguiente:" +"ftparchive</command> realiza una operación similar a la siguiente: " +"<placeholder type=\"programlisting\" id=\"0\"/>" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> #: apt-ftparchive.1.xml:381 @@ -3855,36 +3788,27 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt-ftparchive.1.xml:574 -#, fuzzy -#| msgid "<option>-a</option>" msgid "<option>--arch</option>" -msgstr "<option>-a</option>" +msgstr "<option>--arch</option>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-ftparchive.1.xml:575 -#, fuzzy -#| msgid "" -#| "If the command is either <literal>install</literal> or <literal>remove</" -#| "literal>, then this option acts like running <literal>autoremove</" -#| "literal> command, removing the unused dependency packages. Configuration " -#| "Item: <literal>APT::Get::AutomaticRemove</literal>." msgid "" "Accept in the <literal>packages</literal> and <literal>contents</literal> " "commands only package files matching <literal>*_arch.deb</literal> or " "<literal>*_all.deb</literal> instead of all package files in the given " "path. Configuration Item: <literal>APT::FTPArchive::Architecture</literal>." msgstr "" -"Si la orden es <literal>install</literal> o <literal>remove</literal>, esta " -"opción se ejecutará como <literal>autoremove</literal>, eliminando los " -"paquetes que son dependencia de otro, pero que estén en desuso. Opción de " -"configuración: <literal>APT::Get::AutomaticRemove</literal>." +"Hace que las órdenes <literal>packages</literal> y <literal>contents</" +"literal> sólo acepten aquellos paquetes que coinciden con <literal>*_arch." +"deb</literal> o <literal>*_all.deb</literal>, en lugar de todos los ficheros " +"de paquete en la ruta dada. Elemento de configuración: <literal>APT::" +"FTPArchive::Architecture</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt-ftparchive.1.xml:581 -#, fuzzy -#| msgid "<option>APT::FTPArchive::LongDescription</option>" msgid "<option>APT::FTPArchive::AlwaysStat</option>" -msgstr "<option>APT::FTPArchive::LongDescription</option>" +msgstr "<option>APT::FTPArchive::AlwaysStat</option>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-ftparchive.1.xml:583 @@ -3899,6 +3823,16 @@ msgid "" "theory nobody will have these problems and therefore all these extra checks " "are useless." msgstr "" +"&apt-ftparchive; almacena tantos metadatos como sea posible en una base de " +"datos de almacenamiento. Si los paquetes se recompilan o publican otra vez " +"con la misma versión aparecerán problemas ya que se usarán los metadatos " +"almacenados y ahora obsoletos tales como el tamaño o la suma de control. " +"Esta situación se evitará si se activa esta opción ya que se comprobará si " +"el fichero ha cambiado. Tenga en cuenta que esta opción está definida como " +"«<literal>false</literal>» por omisión, ya que no se recomienda subir varias " +"versiones o compilaciones de un paquete con el mismo número de versión, así " +"que en teoría nadie debería tener problemas y por ello todas estas " +"comprobaciones adicionales son innecesarias." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt-ftparchive.1.xml:593 @@ -3907,13 +3841,6 @@ msgstr "<option>APT::FTPArchive::LongDescription</option>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-ftparchive.1.xml:595 -#, fuzzy -#| msgid "" -#| "This configuration option defaults to \"<literal>true</literal>\" and " -#| "should only be set to <literal>\"false\"</literal> if the Archive " -#| "generated with &apt-ftparchive; also provides <filename>Translation</" -#| "filename> files. Note that it is currently not possible to create these " -#| "files with <command>apt-ftparchive</command>." msgid "" "This configuration option defaults to \"<literal>true</literal>\" and should " "only be set to <literal>\"false\"</literal> if the Archive generated with " @@ -3925,8 +3852,8 @@ msgstr "" "«<literal>true</literal>» y sólo se debería definir como «<literal>false</" "literal>» si el archivo de paquetes generado con &apt-ftparchive; también " "proporciona ficheros <filename>Translation</filename>. Tenga en cuenta que " -"actualmente no es posible crear esos ficheros con <command>apt-ftparchive</" -"command>." +"el fichero maestro <filename>Translation-en</filename> sólo se puede crear " +"con la orden «generate»." #. type: Content of: <refentry><refsect1><title> #: apt-ftparchive.1.xml:607 apt.conf.5.xml:1083 apt_preferences.5.xml:491 @@ -3981,41 +3908,6 @@ msgstr "" #. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> #: apt-get.8.xml:36 -#, fuzzy -#| msgid "" -#| "<command>apt-get</command> <arg><option>-sqdyfmubV</option></arg> <arg> " -#| "<option>-o= <replaceable>config_string</replaceable> </option> </arg> " -#| "<arg> <option>-c= <replaceable>config_file</replaceable> </option> </arg> " -#| "<arg> <option>-t=</option> <group choice='req'> <arg choice='plain'> " -#| "<replaceable>target_release_name</replaceable> </arg> <arg " -#| "choice='plain'> <replaceable>target_release_number_expression</" -#| "replaceable> </arg> <arg choice='plain'> " -#| "<replaceable>target_release_codename</replaceable> </arg> </group> </arg> " -#| "<group choice=\"req\"> <arg choice='plain'>update</arg> <arg " -#| "choice='plain'>upgrade</arg> <arg choice='plain'>dselect-upgrade</arg> " -#| "<arg choice='plain'>dist-upgrade</arg> <arg choice='plain'>install <arg " -#| "choice=\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable> <arg> " -#| "<group choice='req'> <arg choice='plain'> " -#| "=<replaceable>pkg_version_number</replaceable> </arg> <arg " -#| "choice='plain'> /<replaceable>target_release_name</replaceable> </arg> " -#| "<arg choice='plain'> /<replaceable>target_release_codename</replaceable> " -#| "</arg> </group> </arg> </arg> </arg> <arg choice='plain'>remove <arg " -#| "choice=\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable></arg></" -#| "arg> <arg choice='plain'>purge <arg choice=\"plain\" rep=\"repeat" -#| "\"><replaceable>pkg</replaceable></arg></arg> <arg choice='plain'>source " -#| "<arg choice=\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable> <arg> " -#| "<group choice='req'> <arg choice='plain'> " -#| "=<replaceable>pkg_version_number</replaceable> </arg> <arg " -#| "choice='plain'> /<replaceable>target_release_name</replaceable> </arg> " -#| "<arg choice='plain'> /<replaceable>target_release_codename</replaceable> " -#| "</arg> </group> </arg> </arg> </arg> <arg choice='plain'>build-dep <arg " -#| "choice=\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable></arg></" -#| "arg> <arg choice='plain'>check</arg> <arg choice='plain'>clean</arg> <arg " -#| "choice='plain'>autoclean</arg> <arg choice='plain'>autoremove</arg> <arg " -#| "choice='plain'> <group choice='req'> <arg choice='plain'>-v</arg> <arg " -#| "choice='plain'>--version</arg> </group> </arg> <arg choice='plain'> " -#| "<group choice='req'> <arg choice='plain'>-h</arg> <arg choice='plain'>--" -#| "help</arg> </group> </arg> </group>" msgid "" "<command>apt-get</command> <arg><option>-sqdyfmubV</option></arg> <arg> " "<option>-o= <replaceable>config_string</replaceable> </option> </arg> <arg> " @@ -4047,45 +3939,33 @@ msgstr "" "<command>apt-get</command> <arg><option>-sqdyfmubV</option></arg> <arg> " "<option>-o= <replaceable>cadena-de-configuración</replaceable> </option> </" "arg> <arg> <option>-c= <replaceable>fichero-de-configuración</replaceable> </" -"option> </arg> <arg> <option>-t=</option> <group choice='req'> <arg " -"choice='plain'> <replaceable>nombre-de-la-versión-objetivo</replaceable> </" -"arg> <arg choice='plain'> <replaceable>expresión-del-número-de-la-versión-" -"objetivo</replaceable> </arg> <arg choice='plain'> <replaceable>nombre-en-" -"código-de-la-versión-objetivo</replaceable> </arg> </group> </arg> <group " -"choice=\"req\"> <arg choice='plain'>update</arg> <arg " +"option> </arg> <arg> <option>-t=</option> <arg choice='plain'> " +"<replaceable>nombre-de-la-versión-objetivo</replaceable> </arg> </arg> " +"<group choice=\"req\"> <arg choice='plain'>update</arg> <arg " "choice='plain'>upgrade</arg> <arg choice='plain'>dselect-upgrade</arg> <arg " "choice='plain'>dist-upgrade</arg> <arg choice='plain'>install <arg choice=" "\"plain\" rep=\"repeat\"><replaceable>paquete</replaceable> <arg> <group " "choice='req'> <arg choice='plain'> =<replaceable>versión-del-paquete</" "replaceable> </arg> <arg choice='plain'> /<replaceable>nombre-de-la-versión-" -"objetivo</replaceable> </arg> <arg choice='plain'> /<replaceable>nombre-en-" -"código-de-la-versión-objetivo</replaceable> </arg> </group> </arg> </arg> </" -"arg> <arg choice='plain'>remove <arg choice=\"plain\" rep=\"repeat" +"objetivo</replaceable> </arg> </group> </arg> </arg> </arg> <arg " +"choice='plain'>remove <arg choice=\"plain\" rep=\"repeat" "\"><replaceable>paquete</replaceable></arg></arg> <arg choice='plain'>purge " "<arg choice=\"plain\" rep=\"repeat\"><replaceable>paquete</replaceable></" "arg></arg> <arg choice='plain'>source <arg choice=\"plain\" rep=\"repeat" "\"><replaceable>paquete</replaceable> <arg> <group choice='req'> <arg " "choice='plain'> =<replaceable>versión-del-paquete</replaceable> </arg> <arg " "choice='plain'> /<replaceable>nombre-de-la-versión-objetivo</replaceable> </" -"arg> <arg choice='plain'> /<replaceable>nombre-en-código-de-la-versión-" -"objetivo</replaceable> </arg> </group> </arg> </arg> </arg> <arg " -"choice='plain'>build-dep <arg choice=\"plain\" rep=\"repeat" -"\"><replaceable>paquete</replaceable></arg></arg> <arg choice='plain'>check</" -"arg> <arg choice='plain'>clean</arg> <arg choice='plain'>autoclean</arg> " -"<arg choice='plain'>autoremove</arg> <arg choice='plain'> <group " -"choice='req'> <arg choice='plain'>-v</arg> <arg choice='plain'>--version</" -"arg> </group> </arg> <arg choice='plain'> <group choice='req'> <arg " -"choice='plain'>-h</arg> <arg choice='plain'>--help</arg> </group> </arg> </" -"group>" +"arg> </group> </arg> </arg> </arg> <arg choice='plain'>build-dep <arg choice=" +"\"plain\" rep=\"repeat\"><replaceable>paquete</replaceable></arg></arg> <arg " +"choice='plain'>check</arg> <arg choice='plain'>clean</arg> <arg " +"choice='plain'>autoclean</arg> <arg choice='plain'>autoremove</arg> <arg " +"choice='plain'> <group choice='req'> <arg choice='plain'>-v</arg> <arg " +"choice='plain'>--version</arg> </group> </arg> <arg choice='plain'> <group " +"choice='req'> <arg choice='plain'>-h</arg> <arg choice='plain'>--help</arg> " +"</group> </arg> </group>" #. type: Content of: <refentry><refsect1><para> #: apt-get.8.xml:112 -#, fuzzy -#| msgid "" -#| "<command>apt-get</command> is the command-line tool for handling " -#| "packages, and may be considered the user's \"back-end\" to other tools " -#| "using the APT library. Several \"front-end\" interfaces exist, such as " -#| "&dselect;, &aptitude;, &synaptic;, &gnome-apt; and &wajig;." msgid "" "<command>apt-get</command> is the command-line tool for handling packages, " "and may be considered the user's \"back-end\" to other tools using the APT " @@ -4096,7 +3976,7 @@ msgstr "" "desde la línea de órdenes, y se puede considerar el sistema de «bajo nivel» " "de otras herramientas de usuario que usan la biblioteca de APT. Existen " "varias interfaces de «alto nivel», tales como &dselect;, &aptitude;, " -"&synaptic;, &gnome-apt; y &wajig;." +"&synaptic; y &wajig;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt-get.8.xml:121 apt-key.8.xml:124 @@ -4555,19 +4435,6 @@ msgstr "<option>--fix-broken</option>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-get.8.xml:320 -#, fuzzy -#| msgid "" -#| "Fix; attempt to correct a system with broken dependencies in place. This " -#| "option, when used with install/remove, can omit any packages to permit " -#| "APT to deduce a likely solution. Any Package that are specified must " -#| "completely correct the problem. The option is sometimes necessary when " -#| "running APT for the first time; APT itself does not allow broken package " -#| "dependencies to exist on a system. It is possible that a system's " -#| "dependency structure can be so corrupt as to require manual intervention " -#| "(which usually means using &dselect; or <command>dpkg --remove</command> " -#| "to eliminate some of the offending packages). Use of this option together " -#| "with <option>-m</option> may produce an error in some situations. " -#| "Configuration Item: <literal>APT::Get::Fix-Broken</literal>." msgid "" "Fix; attempt to correct a system with broken dependencies in place. This " "option, when used with install/remove, can omit any packages to permit APT " @@ -4583,9 +4450,9 @@ msgid "" msgstr "" "Intenta arreglar un sistema con dependencias actualmente rotas. Si se usa " "esta opción junto a «install»/«remove» se puede omitir cualquier paquete " -"para permitir a APT deducir una posible solución. Cualquier paquete que se " -"especifique debe corregir totalmente el problema. La opción, a veces, se " -"necesita cuando se ejecuta apt por primera vez, APT no permite que existan " +"para permitir a APT deducir una posible solución. Si se especifican " +"problemas, deben corregir totalmente el problema. La opción, a veces, se " +"necesita cuando se ejecuta APT por primera vez, APT no permite que existan " "dependencias de paquetes rotas en un sistema. Es posible que la estructura " "de dependencias de un sistema esté tan deteriorada que requiera una " "intervención manual (generalmente puede ejecutar &dselect; o <command>dpkg --" @@ -4862,29 +4729,21 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt-get.8.xml:433 -#, fuzzy -#| msgid "<option>--no-upgrade</option>" msgid "<option>--only-upgrade</option>" -msgstr "<option>--no-upgrade</option>" +msgstr "<option>--only-upgrade</option>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-get.8.xml:434 -#, fuzzy -#| msgid "" -#| "Do not upgrade packages; When used in conjunction with <literal>install</" -#| "literal>, <literal>no-upgrade</literal> will prevent packages on the " -#| "command line from being upgraded if they are already installed. " -#| "Configuration Item: <literal>APT::Get::Upgrade</literal>." msgid "" "Do not install new packages; When used in conjunction with <literal>install</" "literal>, <literal>only-upgrade</literal> will prevent packages on the " "command line from being upgraded if they are not already installed. " "Configuration Item: <literal>APT::Get::Only-Upgrade</literal>." msgstr "" -"No actualiza los paquetes. Cuando se usa junto a <literal>install</literal>, " -"<literal>no-upgrade</literal> evita que se actualicen los paquetes listados " -"en la línea de órdenes si ya están instalados. Opción de configuración: " -"<literal>APT::Get::Upgrade</literal>." +"No instala paquetes nuevos. Cuando se usa junto a <literal>install</" +"literal>, <literal>only-upgrade</literal> evita que se actualicen los " +"paquetes listados en la línea de órdenes si no están ya instalados. Opción " +"de configuración: <literal>APT::Get::Only-Upgrade</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt-get.8.xml:440 @@ -4941,13 +4800,6 @@ msgstr "<option>--purge</option>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-get.8.xml:460 -#, fuzzy -#| msgid "" -#| "Use purge instead of remove for anything that would be removed. An " -#| "asterisk (\"*\") will be displayed next to packages which are scheduled " -#| "to be purged. <option>remove --purge</option> is equivalent for " -#| "<option>purge</option> command. Configuration Item: <literal>APT::Get::" -#| "Purge</literal>." msgid "" "Use purge instead of remove for anything that would be removed. An asterisk " "(\"*\") will be displayed next to packages which are scheduled to be purged. " @@ -5225,19 +5077,16 @@ msgstr "Herramienta para gestionar las claves de APT" #. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> #: apt-key.8.xml:28 -#, fuzzy -#| msgid "" -#| "<command>apt-key</command> <arg><replaceable>command</replaceable>/</arg> " -#| "<arg rep=\"repeat\"><option><replaceable>arguments</replaceable></" -#| "option></arg>" msgid "" "<command>apt-key</command> <arg><option>--keyring <replaceable>filename</" "replaceable></option></arg> <arg><replaceable>command</replaceable></arg> " "<arg rep=\"repeat\"><option><replaceable>arguments</replaceable></option></" "arg>" msgstr "" -"<command>apt-key</command> <arg><replaceable>orden</replaceable>/</arg> <arg " -"rep=\"repeat\"><option><replaceable>argumentos</replaceable></option></arg>" +"<command>apt-key</command> <arg><option>--keyring <replaceable>nombre-de-" +"fichero</replaceable></option></arg> <arg><replaceable>orden</replaceable></" +"arg> <arg rep=\"repeat\"><option><replaceable>argumentis</replaceable></" +"option></arg>" #. type: Content of: <refentry><refsect1><para> #: apt-key.8.xml:37 @@ -5353,13 +5202,13 @@ msgid "" "Note that options need to be defined before the commands described in the " "previous section." msgstr "" +"Tenga en cuenta que las opciones se deben definir antes de las órdenes " +"descritas en el sección anterior." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt-key.8.xml:142 -#, fuzzy -#| msgid "add <replaceable>filename</replaceable>" msgid "--keyring <replaceable>filename</replaceable>" -msgstr "add <replaceable>nombre-de-fichero</replaceable>" +msgstr "--keyring <replaceable>nombre-de-fichero</replaceable>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-key.8.xml:143 @@ -5371,11 +5220,17 @@ msgid "" "filename> is the primary keyring which means that e.g. new keys are added to " "this one." msgstr "" +"Con esta opción es posible definir un fichero de registro de claves " +"específico con el que la orden debería operar. El valor predeterminado es " +"que la orden se ejecuta con el fichero <filename>trusted.gpg</filename> así " +"como con los fragmentos en el directorio <filename>trusted.gpg.d</filename>, " +"aunque <filename>trusted.gpg</filename> es el registro de claves principal, " +"esto es, por ejemplo, que las claves nuevas se añaden a este fichero." #. type: Content of: <refentry><refsect1><variablelist> #: apt-key.8.xml:156 msgid "&file-trustedgpg;" -msgstr "" +msgstr "&file-trustedgpg;" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt-key.8.xml:158 @@ -5586,7 +5441,7 @@ msgstr "Muestra la versión del programa." #. type: Content of: <refentry><refsect1><variablelist> #: apt-mark.8.xml:124 msgid " &file-extended_states;" -msgstr "" +msgstr " &file-extended_states;" #. type: Content of: <refentry><refsect1><para> #: apt-mark.8.xml:129 @@ -5985,12 +5840,6 @@ msgstr "" #. The last update date #. type: Content of: <refentry><refentryinfo> #: apt.conf.5.xml:13 -#, fuzzy -#| msgid "" -#| "&apt-author.jgunthorpe; &apt-author.team; <author> <firstname>Daniel</" -#| "firstname> <surname>Burrows</surname> <contrib>Initial documentation of " -#| "Debug::*.</contrib> <email>dburrows@debian.org</email> </author> &apt-" -#| "email; &apt-product; <date>18 September 2009</date>" msgid "" "&apt-author.jgunthorpe; &apt-author.team; <author> <firstname>Daniel</" "firstname> <surname>Burrows</surname> <contrib>Initial documentation of " @@ -6000,7 +5849,7 @@ msgstr "" "&apt-author.jgunthorpe; &apt-author.team; <author> <firstname>Daniel</" "firstname> <surname>Burrows</surname> <contrib>Documentación inicial de " "Debug::*.</contrib> <email>dburrows@debian.org</email> </author> &apt-email; " -"&apt-product; <date>18 de Septiembre de 2009</date>" +"&apt-product; <date>16 de Enero de 2009</date>" #. type: Content of: <refentry><refnamediv><refname> #: apt.conf.5.xml:28 apt.conf.5.xml:35 @@ -6025,6 +5874,11 @@ msgid "" "made. All tools therefore share the configuration files and also use a " "common command line parser to provide a uniform environment." msgstr "" +"<filename>apt.conf</filename> es el fichero de configuración principal del " +"conjunto de herramientas APT, pero no es ni mucho menos donde se pueden " +"ubicar cambios a las opciones. Por ello, todas las herramientas comparten " +"los ficheros de configuración y también usan un analizador de línea de " +"órdenes común para ofrecer un entorno uniforme." #. type: Content of: <refentry><refsect1><orderedlist><para> #: apt.conf.5.xml:45 @@ -6032,6 +5886,8 @@ msgid "" "When an APT tool starts up it will read the configuration files in the " "following order:" msgstr "" +"Cuando se inicia una herramienta de APT, leerá los ficheros de configuración " +"en el siguiente orden:" #. type: Content of: <refentry><refsect1><orderedlist><listitem><para> #: apt.conf.5.xml:47 @@ -6039,6 +5895,8 @@ msgid "" "the file specified by the <envar>APT_CONFIG</envar> environment variable (if " "any)" msgstr "" +"El fichero definido por la variable de entorno <envar>APT_CONFIG</envar> (de " +"existir)." #. type: Content of: <refentry><refsect1><orderedlist><listitem><para> #: apt.conf.5.xml:49 @@ -6048,12 +5906,19 @@ msgid "" "which only contain alphanumeric, hyphen (-), underscore (_) and period (.) " "characters - otherwise they will be silently ignored." msgstr "" +"Todos los ficheros en <literal>Dir::Etc::Parts</literal> en orden " +"alfanumérico ascendente que no tienen extensión o la extensión " +"«<literal>conf</literal>», y que sólo contiene caracteres alfanuméricos, " +"guiones (-), y guión bajo (_) y punto (.). De otra forma, se ignorarán " +"silenciosamente." #. type: Content of: <refentry><refsect1><orderedlist><listitem><para> #: apt.conf.5.xml:54 msgid "" "the main configuration file specified by <literal>Dir::Etc::main</literal>" msgstr "" +"El fichero de configuración principal definido por <literal>Dir::Etc::main</" +"literal>." #. type: Content of: <refentry><refsect1><orderedlist><listitem><para> #: apt.conf.5.xml:56 @@ -6061,11 +5926,13 @@ msgid "" "the command line options are applied to override the configuration " "directives or to load even more configuration files." msgstr "" +"Las opciones de línea de órdenes se aplican para anular directivas de " +"configuración o para cargar más ficheros de configuración." #. type: Content of: <refentry><refsect1><title> #: apt.conf.5.xml:60 msgid "Syntax" -msgstr "" +msgstr "Sintaxis" #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:61 @@ -6301,12 +6168,6 @@ msgstr "Default-Release" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml:153 -#, fuzzy -#| msgid "" -#| "Default release to install packages from if more than one version " -#| "available. Contains release name, codename or release version. Examples: " -#| "'stable', 'testing', 'unstable', 'lenny', 'squeeze', '4.0', '5.0*'. See " -#| "also &apt-preferences;." msgid "" "Default release to install packages from if more than one version available. " "Contains release name, codename or release version. Examples: 'stable', " @@ -6316,8 +6177,8 @@ msgstr "" "La versión predeterminada de la que se instalarán los paquetes, si hay más " "de una versión disponible. Contiene el nombre de la versión, ya sea el " "nombre en código o el número de la versión. Por ejemplo: «stable», " -"«testing», «unstable», «lenny», «squeeze», «4.0», «5.0*». Vea también &apt-" -"preferences;." +"«testing», «unstable», «&stable-codename;», «&testing-codename;», «4.0», " +"«5.0*». Vea también &apt-preferences;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt.conf.5.xml:158 @@ -6359,37 +6220,6 @@ msgstr "Immediate-Configure" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml:171 -#, fuzzy -#| msgid "" -#| "Defaults to on which will cause APT to install essential and important " -#| "packages as fast as possible in the install/upgrade operation. This is " -#| "done to limit the effect of a failing &dpkg; call: If this option is " -#| "disabled APT does treat an important package in the same way as an extra " -#| "package: Between the unpacking of the important package A and his " -#| "configuration can then be many other unpack or configuration calls, e.g. " -#| "for package B which has no relation to A, but causes the dpkg call to " -#| "fail (e.g. because maintainer script of package B generates an error) " -#| "which results in a system state in which package A is unpacked but " -#| "unconfigured - each package depending on A is now no longer guaranteed to " -#| "work as their dependency on A is not longer satisfied. The immediate " -#| "configuration marker is also applied to all dependencies which can " -#| "generate a problem if the dependencies e.g. form a circle as a dependency " -#| "with the immediate flag is comparable with a Pre-Dependency. So in theory " -#| "it is possible that APT encounters a situation in which it is unable to " -#| "perform immediate configuration, error out and refers to this option so " -#| "the user can deactivate the immediate configuration temporary to be able " -#| "to perform an install/upgrade again. Note the use of the word \"theory\" " -#| "here as this problem was only encountered by now in real world a few " -#| "times in non-stable distribution versions and caused by wrong " -#| "dependencies of the package in question or by a system in an already " -#| "broken state, so you should not blindly disable this option as the " -#| "mentioned scenario above is not the only problem immediate configuration " -#| "can help to prevent in the first place. Before a big operation like " -#| "<literal>dist-upgrade</literal> is run with this option disabled it " -#| "should be tried to explicitly <literal>install</literal> the package APT " -#| "is unable to configure immediately, but please make sure to report your " -#| "problem also to your distribution and to the APT team with the buglink " -#| "below so they can work on improving or correcting the upgrade process." msgid "" "Defaults to on which will cause APT to install essential and important " "packages as fast as possible in the install/upgrade operation. This is done " @@ -6437,7 +6267,7 @@ msgstr "" "configuración inmediata, lo cual lo califica casi como Pre-Dependencia. Así, " "en teoría es posible que APT encuentre una situación en la que es incapaz de " "llevar a cabo una configuración inmediata, devuelva un error y mencione esta " -"opción para que así el usuario puede desactivar la configuración inmediata " +"opción para que así el usuario pueda desactivar la configuración inmediata " "temporalmente para llevar a cabo una vez más la instalación y/o " "actualización. Observe el uso de la expresión «en teoría», ya que esta " "situación sólo se ha visto algunas veces con versiones de distribución no " @@ -6446,10 +6276,10 @@ msgstr "" "opción ya que la situación mencionada anteriormente no es el único problema " "que la configuración inmediata puede resolver. Antes de llevar a cabo una " "operación grande como <literal>dist-upgrade</literal> con esta opción " -"desactivada debería intentar un <literal>install</literal> explícito con el " -"paquete que APT es incapaz de configurar inmediatamente, pero asegúrese de " -"informar del fallo a su distribución y al equipo de APT mediante el enlace a " -"informes de fallo para que así puedan mejorar o corregir el proceso de " +"desactivada debería intentar un <literal>install</literal> con el paquete " +"que APT es incapaz de configurar inmediatamente, pero asegúrese de informar " +"del fallo a su distribución y al equipo de APT mediante el enlace a informes " +"de fallo a continuación para que así puedan mejorar o corregir el proceso de " "actualización." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> @@ -6477,7 +6307,7 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt.conf.5.xml:202 msgid "Cache-Start, Cache-Grow and Cache-Limit" -msgstr "" +msgstr "Cache-Start, Cache-Grow y Cache-Limit" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml:203 @@ -6498,6 +6328,23 @@ msgid "" "literal> is 0 which stands for no limit. If <literal>Cache-Grow</literal> " "is set to 0 the automatic grow of the cache is disabled." msgstr "" +"A partir de la versión 0.7.26, APT usa un fichero de caché mapeado («mapped " +"cache file») redimensionable para almacenar la información disponible. " +"<literal>Cache-Start</literal> actúa como una indicación del tamaño que el " +"caché alcanzará y por ello es la cantidad de memoria que APT solicitará al " +"iniciarse. El valor predeterminado es 20971520 bytes (~20 MB). Tenga en " +"cuenta que esta cantidad de espacio debe estar disponible para APT, o " +"fallará. Por ello, este valor se debería disminuir para los dispositivos con " +"memoria restringida, mientras que se debería aumentar en sistemas con varias " +"fuentes configuradas. <literal>Cache-Grow</literal> define en bytes, con el " +"valor predeterminado de 1048576 (~1 MB) cuánto se aumentará el caché en el " +"caso de que el espacio definido por <literal>Cache-Start</literal> no sea " +"suficiente. Este valor se aplicará repetidamente hasta que el caché sea " +"suficientemente grande para almacenar toda la información o si el caché " +"alcanza <literal>Cache-Limit</literal>. El valor predeterminado de " +"<literal>Cache-Limit</literal> es cero, esto es, ilimitado. Si define " +"<literal>Cache-Grow</literal> con un valor de cero se desactivará el " +"crecimiento automático del cache." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt.conf.5.xml:218 @@ -6560,7 +6407,7 @@ msgstr "El grupo Acquire" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> #: apt.conf.5.xml:244 msgid "Check-Valid-Until" -msgstr "" +msgstr "Check-Valid-Until" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml:245 @@ -6573,11 +6420,19 @@ msgid "" "header, but if they don't or a stricter value is volitional the following " "<literal>Max-ValidTime</literal> option can be used." msgstr "" +"Opción relacionada con la seguridad, cuyo valor predeterminado de «true», ya " +"que una validación temporal para un fichero «Release» evita ataques " +"«longtime replay» y puede, por ejemplo, ayudar a identificar las réplicas no " +"actualizadas, aunque esta función depende de la corrección de la hora del " +"sistema del usuario. Se recomienda a los responsables de archivos que creen " +"ficheros «Release» con la cabecera <literal>Valid-Until</literal>, pero si " +"se hace, o si un valor más estricto es opcional, se puede usar la opción " +"<literal>Max-ValidTime</literal>." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> #: apt.conf.5.xml:255 msgid "Max-ValidTime" -msgstr "" +msgstr "Max-ValidTime" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml:256 @@ -6592,6 +6447,17 @@ msgid "" "settings can be made by appending the label of the archive to the option " "name." msgstr "" +"Los segundos que el fichero «Release» se considerará válido después de su " +"creación. El valor predeterminado es «para siempre» (cero) si el fichero " +"«Release» del archivo no incluye una cabecera <literal>Valid-Until</" +"literal>. Si lo incluye, el valor predeterminado es esta fecha. La fecha del " +"fichero «Release» o la fecha definida por la hora de creación del fichero " +"«Release» (cabecera <literal>Date</literal>), a lo que se añaden los " +"segundos definidos con estas opciones, se usan para comprobar si la validez " +"de un fichero a expirado, usando la fecha más antigua de las dos " +"anteriormente mencionadas. Se pueden definir opciones de configuración " +"específicas al archivo añadiendo la etiqueta del archivo al nombre de la " +"opción." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> #: apt.conf.5.xml:268 @@ -6618,6 +6484,12 @@ msgid "" "the size of the targeted file. If one of these limits is exceeded the " "complete file is downloaded instead of the patches." msgstr "" +"Se ofrecen dos opciones secundarias para limitar el uso de «PDiffs»: " +"<literal>FileLimit</literal> permite definir cuántos ficheros «PDiff» como " +"máximo se descargarán para parchear un fichero. Por otra parte, " +"<literal>SizeLimit</literal> es el porcentaje de tamaño máximo de todos los " +"parches comparados con el tamaño del fichero destino. Si se supera uno de " +"estos límites, se descargará el fichero completo en lugar de los parches." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> #: apt.conf.5.xml:281 @@ -7087,7 +6959,7 @@ msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> #: apt.conf.5.xml:450 msgid "GzipIndexes" -msgstr "" +msgstr "GzipIndexes" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml:452 @@ -7097,6 +6969,11 @@ msgid "" "unpacking them. This saves quite a lot of disk space at the expense of more " "CPU requirements when building the local package caches. False by default." msgstr "" +"Al descargar ficheros de índice comprimidos con <literal>gzip</literal>, " +"(«Packages», «Sources», o «Translations»), los mantiene comprimidos " +"localmente en lugar de desempaquetarlos. Esto ahorra mucho espacio en disco " +"a costa de mayores requerimientos del procesador al generar los almacenes de " +"paquetes locales. El valor predeterminado es «false»." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> #: apt.conf.5.xml:459 @@ -7105,16 +6982,6 @@ msgstr "Languages" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml:460 -#, fuzzy -#| msgid "" -#| "The Languages subsection controls which <filename>Translation</filename> " -#| "files are downloaded and in which order APT tries to display the " -#| "Description-Translations. APT will try to display the first available " -#| "Description for the Language which is listed at first. Languages can be " -#| "defined with their short or long Languagecodes. Note that not all " -#| "archives provide <filename>Translation</filename> files for every " -#| "Language - especially the long Languagecodes are rare, so please inform " -#| "you which ones are available before you set here impossible values." msgid "" "The Languages subsection controls which <filename>Translation</filename> " "files are downloaded and in which order APT tries to display the Description-" @@ -7127,7 +6994,7 @@ msgid "" msgstr "" "La subsección «Languages» controla qué ficheros <filename>Translation</" "filename> se descargan y en qué orden APT intentará mostrar las traducciones " -"de la descripción. APT intentará mostrar la primera descripción del idioma " +"de la descripción. APT intentará mostrar la primera descripción en el idioma " "que esté primero en la lista. Los idiomas se pueden definir con sus códigos " "de idioma cortos o largos. Tenga en cuenta que no todos los archivos de " "paquetes proporcionan ficheros <filename>Translation</filename> para cada " @@ -7142,26 +7009,6 @@ msgstr "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml:466 -#, fuzzy -#| msgid "" -#| "The default list includes \"environment\" and \"en\". " -#| "\"<literal>environment</literal>\" has a special meaning here: It will be " -#| "replaced at runtime with the languagecodes extracted from the " -#| "<literal>LC_MESSAGES</literal> enviroment variable. It will also ensure " -#| "that these codes are not included twice in the list. If " -#| "<literal>LC_MESSAGES</literal> is set to \"C\" only the " -#| "<filename>Translation-en</filename> file (if available) will be used. To " -#| "force apt to use no Translation file use the setting <literal>Acquire::" -#| "Languages=none</literal>. \"<literal>none</literal>\" is another special " -#| "meaning code which will stop the search for a fitting " -#| "<filename>Translation</filename> file. This can be used by the system " -#| "administrator to let APT know that it should download also this files " -#| "without actually use them if not the environment specifies this " -#| "languages. So the following example configuration will result in the " -#| "order \"en, de\" in an english and in \"de, en\" in a german " -#| "localization. Note that \"fr\" is downloaded, but not used if APT is not " -#| "used in a french localization, in such an environment the order would be " -#| "\"fr, de, en\". <placeholder type=\"programlisting\" id=\"0\"/>" msgid "" "The default list includes \"environment\" and \"en\". " "\"<literal>environment</literal>\" has a special meaning here: It will be " @@ -7187,19 +7034,20 @@ msgstr "" "ejecución con los códigos de idioma extraídos de la variable de entorno " "<literal>LC_MESSAGES</literal>. También se asegurará de que estos códigos no " "se incluyan dos veces en la lista. Si <literal>LC_MESSAGES</literal> está " -"definida con «C» sólo se usará el fichero <filename>Translation-en</" +"definida como «C» sólo se usará el fichero <filename>Translation-en</" "filename> (si está disponible). Puede usar la opción <literal>Acquire::" "Languages=none</literal> para forzar apt a que no use ficheros " "«Translation» . «<literal>none</literal>» es otro código especial que " "significa que detendrá la búsqueda de un fichero <filename>Translation</" "filename> adecuado. El administrador del sistema puede usar esto para " "permitir que APT sepa que debería descargar estos ficheros sin tener que " -"usarlos si no se definen en «environment». De modo que la siguiente " -"configuración de ejemplo resultará en el orden «en, de» en una localización " -"inglesa y «de, en» en una localización alemana. Tenga en cuenta que «fr» se " -"descargará, pero no se usará si APT no se usa en una localización francesa " -"de modo que la orden en este entorno («environment») sería «fr, de, en». " -"<placeholder type=\"programlisting\" id=\"0\"/>" +"usarlos si no se definen con «environment». De modo que el siguiente ejemplo " +"de configuración resultará en el orden «en, de» en una configuración " +"regional inglesa y «de, en» en una configuración regional alemana. Tenga en " +"cuenta que «fr» se descargará, pero no se usará si APT no se usa con una " +"configuración regional francesa, de modo que la orden en este entorno " +"(«environment») sería «fr, de, en». <placeholder type=\"programlisting\" id=" +"\"0\"/>" #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:240 @@ -7332,6 +7180,13 @@ msgid "" "z]+</literal> is silently ignored. As seen in the last default value these " "patterns can use regular expression syntax." msgstr "" +"La lista <literal>Ignore-Files-Silently</literal> se puede usar para definir " +"qué fichero debería ignorar APT silenciosamente al analizar ficheros en los " +"directorios de fragmentos. Por omisión, se ignora silenciosamente un fichero " +"que termina con <literal>.disabled</literal>, <literal>~</literal>, " +"<literal>.bak</literal> o <literal>.dpkg-[a-z]+</literal>. Como se puede ver " +"con el último valor predeterminado, estos patrones pueden usar la sintaxis " +"de expresiones regulares." #. type: Content of: <refentry><refsect1><title> #: apt.conf.5.xml:541 @@ -8275,12 +8130,10 @@ msgstr "&apt-cache;, &apt-config;, &apt-preferences;." #. The last update date #. type: Content of: <refentry><refentryinfo> #: apt_preferences.5.xml:13 -#, fuzzy -#| msgid "&apt-author.team; &apt-email; &apt-product; <date>04 May 2009</date>" msgid "" "&apt-author.team; &apt-email; &apt-product; <date>16 February 2010</date>" msgstr "" -"&apt-author.team; &apt-email; &apt-product; <date>4 de Mayo 2009</date>" +"&apt-author.team; &apt-email; &apt-product; <date>16 de Febrero 2010</date>" #. type: Content of: <refentry><refnamediv><refname> #: apt_preferences.5.xml:21 apt_preferences.5.xml:28 @@ -8355,6 +8208,16 @@ msgid "" "expected in older or newer releases or together with other packages from " "different releases. You have been warned." msgstr "" +"Las preferencias («preferences») son un gran poder en las manos de un " +"administrador de sistemas, ¡pero también se pueden convertir en su mayor " +"pesadilla si se usan sin cuidado! APT no se cuestionará si las preferencias " +"contienen opciones erróneas, y por ello puede llevar a paquetes no " +"instalables o tomar decisiones erróneas al actualizar paquetes. Pueden " +"surgir más problemas si se mezclan varias publicaciones de distribución sin " +"un correcto entendimiento de los siguientes párrafos. Los paquetes incluidos " +"en una distribución específica no se revisan en combinación con otras " +"distribuciones más antiguas o más recientes, y puede que no funcionen como " +"esperado. Queda avisado." #. type: Content of: <refentry><refsect1><para> #: apt_preferences.5.xml:67 @@ -8366,6 +8229,12 @@ msgid "" "underscore (_) and period (.) characters - otherwise they will be silently " "ignored." msgstr "" +"Tenga en cuenta los ficheros en el directorio <filename>/etc/apt/preferences." +"d</filename> se analizan en orden alfanumérico ascendente y deben seguir las " +"convenciones de nombre a continuación: Los ficheros no tienen extensión o la " +"extensión «<literal>pref</literal>» y sólo deben contener caracteres " +"alfanuméricos, guión (-), guión bajo (_) y punto (.). De no ser así, se " +"ignorarán silenciosamente." #. type: Content of: <refentry><refsect1><refsect2><title> #: apt_preferences.5.xml:74 @@ -8414,10 +8283,8 @@ msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> #: apt_preferences.5.xml:101 -#, fuzzy -#| msgid "priority 100" msgid "priority 1" -msgstr "prioridad 100" +msgstr "priority 1" #. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> #: apt_preferences.5.xml:102 @@ -8426,6 +8293,9 @@ msgid "" "filename> files are marked as \"NotAutomatic: yes\" like the debian " "experimental archive." msgstr "" +"para las versiones procedentes de archivos que en sus ficheros " +"<filename>Release</filename> están marcados como «NotAutomatic:yes», como en " +"el archivo «experimental» de Debian." #. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> #: apt_preferences.5.xml:107 @@ -8477,11 +8347,6 @@ msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> #: apt_preferences.5.xml:123 -#, fuzzy -#| msgid "" -#| "If the target release has not been specified then APT simply assigns " -#| "priority 100 to all installed package versions and priority 500 to all " -#| "uninstalled package versions." msgid "" "If the target release has not been specified then APT simply assigns " "priority 100 to all installed package versions and priority 500 to all " @@ -8491,7 +8356,9 @@ msgid "" msgstr "" "Si no se especifica ninguna distribución objetivo APT asigna prioridad 100 a " "todas las versiones de los paquetes instalados y 500 a las versiones no " -"instaladas de paquetes." +"instaladas de paquetes. Las versiones procedentes de archivos que en sus " +"ficheros <filename>Release</filename> están marcados como «NotAutomatic:yes» " +"- estas versiones reciben la prioridad 1." #. type: Content of: <refentry><refsect1><refsect2><para> #: apt_preferences.5.xml:129 @@ -8684,32 +8551,26 @@ msgid "" "high priority to all versions available from the server identified by the " "hostname \"ftp.de.debian.org\"" msgstr "" +"Una nota de aviso: la palabra clave usada aquí es «<literal>origin</" +"literal>», el cual se puede usar para coincidir con un nombre de sistema. El " +"siguiente registro asignará una prioridad alta a todas las versiones " +"disponibles desde el servidor identificado con el nombre de sistema «ftp.de." +"debian.org»." #. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting> #: apt_preferences.5.xml:210 -#, fuzzy, no-wrap -#| msgid "" -#| "Package: *\n" -#| "Pin: origin \"\"\n" -#| "Pin-Priority: 999\n" +#, no-wrap msgid "" "Package: *\n" "Pin: origin \"ftp.de.debian.org\"\n" "Pin-Priority: 999\n" msgstr "" "Package: *\n" -"Pin: origin \"\"\n" +"Pin: origin \"ftp.de.debian.org\"\n" "Pin-Priority: 999\n" #. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> #: apt_preferences.5.xml:214 -#, fuzzy -#| msgid "" -#| "A note of caution: the keyword used here is \"<literal>origin</literal>" -#| "\". This should not be confused with the Origin of a distribution as " -#| "specified in a <filename>Release</filename> file. What follows the " -#| "\"Origin:\" tag in a <filename>Release</filename> file is not an Internet " -#| "address but an author or vendor name, such as \"Debian\" or \"Ximian\"." msgid "" "This should <emphasis>not</emphasis> be confused with the Origin of a " "distribution as specified in a <filename>Release</filename> file. What " @@ -8717,12 +8578,11 @@ msgid "" "Internet address but an author or vendor name, such as \"Debian\" or \"Ximian" "\"." msgstr "" -"Aviso: la palabra clave usada aquí es «<literal>origin</literal>». No se " -"debe confundir con el origen («Origin:») de una distribución tal y como se " -"especifica en el fichero <filename>Release</filename>. Lo que sigue a la " -"etiqueta «Origin:» en un fichero <filename>Release</filename> no es la " -"dirección de un sitio de Internet, sino el autor o el nombre del proveedor, " -"tales como «Debian» o «Ximian»." +"<emphasis>No</emphasis> se debe confundir con el origen («Origin») de una " +"distribución tal y como se especifica un fichero <filename>Release</" +"filename>. Lo que sigue a la etiqueta «Origin:» en un fichero " +"<filename>Release</filename> no es la dirección de un sitio de Internet, " +"sino el autor o el nombre del proveedor, tales como «Debian» o «Ximian»." #. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> #: apt_preferences.5.xml:219 @@ -8749,11 +8609,6 @@ msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> #: apt_preferences.5.xml:228 -#, fuzzy -#| msgid "" -#| "The following record assigns a high priority to all package versions " -#| "belonging to any distribution whose Codename is \"<literal>squeeze</" -#| "literal>\"." msgid "" "The following record assigns a high priority to all package versions " "belonging to any distribution whose Codename is \"<literal>&testing-codename;" @@ -8761,22 +8616,18 @@ msgid "" msgstr "" "El siguiente registro asigna una prioridad alta a todas las versiones de los " "paquetes pertenecientes a cualquier distribución que tenga como nombre clave " -"«<literal>squeeze</literal>»." +"«<literal>&testing-codename;</literal>»." #. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting> #: apt_preferences.5.xml:232 -#, fuzzy, no-wrap -#| msgid "" -#| "Package: *\n" -#| "Pin: release n=squeeze\n" -#| "Pin-Priority: 900\n" +#, no-wrap msgid "" "Package: *\n" "Pin: release n=&testing-codename;\n" "Pin-Priority: 900\n" msgstr "" "Package: *\n" -"Pin: release n=squeeze\n" +"Pin: release n=&testing-codename;\n" "Pin-Priority: 900\n" #. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> @@ -9087,14 +8938,6 @@ msgstr "La línea <literal>Codename:</literal>" #. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> #: apt_preferences.5.xml:392 -#, fuzzy -#| msgid "" -#| "names the codename to which all the packages in the directory tree " -#| "belong. For example, the line \"Codename: squeeze\" specifies that all " -#| "of the packages in the directory tree below the parent of the " -#| "<filename>Release</filename> file belong to a version named " -#| "<literal>squeeze</literal>. Specifying this value in the APT preferences " -#| "file would require the line:" msgid "" "names the codename to which all the packages in the directory tree belong. " "For example, the line \"Codename: &testing-codename;\" specifies that all of " @@ -9104,19 +8947,19 @@ msgid "" "preferences file would require the line:" msgstr "" "indica el nombre de la distribución a la que pertenecen todos los paquetes " -"del árbol de directorios. Por ejemplo, la línea «Codename: squeeze» " -"especifica que todos los paquetes en el árbol de directorios por debajo del " -"directorio padre marcado en el fichero <filename>Release</filename> " -"pertenecen a la versión llamada <literal>squeeze</literal>. Para especificar " -"una preferencia de acuerdo con este parámetro tendrá que poner una de las " -"siguientes líneas en el fichero de preferencias de APT:" +"del árbol de directorios. Por ejemplo, la línea «Codename: &testing-" +"codename;» especifica que todos los paquetes en el árbol de directorios por " +"debajo del directorio padre marcado en el fichero <filename>Release</" +"filename> pertenecen a la versión llamada <literal>&testing-codename;</" +"literal>. Para especificar una preferencia de acuerdo con este parámetro " +"tendrá que poner una de las siguientes líneas en el fichero de preferencias " +"de APT:" #. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting> #: apt_preferences.5.xml:401 -#, fuzzy, no-wrap -#| msgid "Pin: release a=stable\n" +#, no-wrap msgid "Pin: release n=&testing-codename;\n" -msgstr "Pin: release a=stable\n" +msgstr "Pin: release n=&testing-codename;\n" #. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> #: apt_preferences.5.xml:408 @@ -9226,17 +9069,6 @@ msgstr "Pin: release l=Debian\n" #. type: Content of: <refentry><refsect1><refsect2><para> #: apt_preferences.5.xml:363 -#, fuzzy -#| msgid "" -#| "The <filename>Release</filename> file is normally found in the directory " -#| "<filename>.../dists/<replaceable>dist-name</replaceable></filename>: for " -#| "example, <filename>.../dists/stable/Release</filename>, or <filename>.../" -#| "dists/woody/Release</filename>. It consists of a single multi-line " -#| "record which applies to <emphasis>all</emphasis> of the packages in the " -#| "directory tree below its parent. Unlike the <filename>Packages</" -#| "filename> file, nearly all of the lines in a <filename>Release</filename> " -#| "file are relevant for setting APT priorities: <placeholder type=" -#| "\"variablelist\" id=\"0\"/>" msgid "" "The <filename>Release</filename> file is normally found in the directory " "<filename>.../dists/<replaceable>dist-name</replaceable></filename>: for " @@ -9251,12 +9083,12 @@ msgstr "" "El fichero <filename>Release</filename> se suele encontrar en el directorio " "<filename>.../dists/<replaceable>nombre-dist</replaceable></filename>, por " "ejemplo <filename>.../dists/stable/Release</filename> o <filename>.../dists/" -"woody/Release</filename>. El fichero consiste en registros de una sola línea " -"que se aplican a <emphasis>todos</emphasis> los paquetes por debajo del " -"directorio padre. Al contrario que el fichero <filename>Packages</filename>, " -"casi todas las líneas del fichero <filename>Release</filename> son " -"relevantes para las prioridades de APT: <placeholder type=\"variablelist\" " -"id=\"0\"/>" +"&stable-codename;/Release</filename>. El fichero consiste en registros de " +"una sola línea que se aplican a <emphasis>todos</emphasis> los paquetes por " +"debajo del directorio padre. Al contrario que el fichero <filename>Packages</" +"filename>, casi todas las líneas del fichero <filename>Release</filename> " +"son relevantes para las prioridades de APT: <placeholder type=\"variablelist" +"\" id=\"0\"/>" #. type: Content of: <refentry><refsect1><refsect2><para> #: apt_preferences.5.xml:469 @@ -9484,22 +9316,7 @@ msgstr "Seguir la evolución de una publicación por el nombre" #. type: Content of: <refentry><refsect1><refsect2><para><programlisting> #: apt_preferences.5.xml:600 -#, fuzzy, no-wrap -#| msgid "" -#| "Explanation: Uninstall or do not install any Debian-originated package versions\n" -#| "Explanation: other than those in the distribution codenamed with squeeze or sid\n" -#| "Package: *\n" -#| "Pin: release n=squeeze\n" -#| "Pin-Priority: 900\n" -#| "\n" -#| "Explanation: Debian unstable is always codenamed with sid\n" -#| "Package: *\n" -#| "Pin: release a=sid\n" -#| "Pin-Priority: 800\n" -#| "\n" -#| "Package: *\n" -#| "Pin: release o=Debian\n" -#| "Pin-Priority: -10\n" +#, no-wrap msgid "" "Explanation: Uninstall or do not install any Debian-originated package versions\n" "Explanation: other than those in the distribution codenamed with &testing-codename; or sid\n" @@ -9519,12 +9336,12 @@ msgstr "" "Explanation: Eliminar o no instalar cualquier paquete de Debian cuya versión sea\n" "Explanation: distinta a aquellos en las distribuciones de nombre squeeze o sid\n" "Package: *\n" -"Pin: release n=squeeze\n" +"Pin: release n=&testing-codename;\n" "Pin-Priority: 900\n" "\n" -"Explanation: El nombre clave de Debian unstable siempre es sid\n" +"Explanation: El nombre clave de Debian «unstable» siempre es sid\n" "Package: *\n" -"Pin: release a=sid\n" +"Pin: release n=sid\n" "Pin-Priority: 800\n" "\n" "Package: *\n" @@ -9560,12 +9377,6 @@ msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> #: apt_preferences.5.xml:617 -#, fuzzy -#| msgid "" -#| "With a suitable &sources-list; file and the above preferences file, any " -#| "of the following commands will cause APT to upgrade to the latest version" -#| "(s) in the release codenamed with <literal>squeeze</literal>. " -#| "<placeholder type=\"programlisting\" id=\"0\"/>" msgid "" "With a suitable &sources-list; file and the above preferences file, any of " "the following commands will cause APT to upgrade to the latest version(s) in " @@ -9575,7 +9386,8 @@ msgstr "" "Con un fichero «&sources-list;» adecuado y el fichero de preferencias " "mostrado anteriormente, cualquiera de las siguientes órdenes provocará que " "APT actualice los paquetes a la última versión de la distribución llamada " -"<literal>squeeze</literal>. <placeholder type=\"programlisting\" id=\"0\"/>" +"<literal>&testing-codename;</literal>. <placeholder type=\"programlisting\" " +"id=\"0\"/>" #. type: Content of: <refentry><refsect1><refsect2><para><programlisting> #: apt_preferences.5.xml:637 @@ -9585,15 +9397,6 @@ msgstr "apt-get install <replaceable>paquete</replaceable>/sid\n" #. type: Content of: <refentry><refsect1><refsect2><para> #: apt_preferences.5.xml:628 -#, fuzzy -#| msgid "" -#| "The following command will cause APT to upgrade the specified package to " -#| "the latest version from the <literal>sid</literal> distribution. " -#| "Thereafter, <command>apt-get upgrade</command> will upgrade the package " -#| "to the most recent <literal>squeeze</literal> version if that is more " -#| "recent than the installed version, otherwise, to the most recent " -#| "<literal>sid</literal> version if that is more recent than the installed " -#| "version. <placeholder type=\"programlisting\" id=\"0\"/>" msgid "" "The following command will cause APT to upgrade the specified package to the " "latest version from the <literal>sid</literal> distribution. Thereafter, " @@ -9606,8 +9409,8 @@ msgstr "" "La siguiente orden hace que APT actualice un determinado paquete a la última " "versión de la distribución <literal>sid</literal>. Más tarde, <command>apt-" "get upgrade</command> actualizará el paquete a la última versión de la " -"distribución<literal>squeeze</literal> si es más reciente que la versión " -"instalada. De otro modo, se instalará la versión más reciente de la " +"distribución<literal>&testing-codename;</literal> si es más reciente que la " +"versión instalada. De otro modo, se instalará la versión más reciente de la " "distribución <literal>sid</literal> si es más reciente que la versión " "instalada. <placeholder type=\"programlisting\" id=\"0\"/>" @@ -9818,18 +9621,14 @@ msgstr "Algunos ejemplos:" #. type: Content of: <refentry><refsect1><literallayout> #: sources.list.5.xml:114 -#, fuzzy, no-wrap -#| msgid "" -#| "deb http://http.us.debian.org/debian stable main contrib non-free\n" -#| "deb http://http.us.debian.org/debian dists/stable-updates/\n" -#| " " +#, no-wrap msgid "" "deb http://ftp.debian.org/debian &stable-codename; main contrib non-free\n" "deb http://security.debian.org/ &stable-codename;/updates main contrib non-free\n" " " msgstr "" -"deb http://http.us.debian.org/debian stable main contrib non-free\n" -"deb http://http.us.debian.org/debian dists/stable-updates/\n" +"deb http://ftp.debian.org/debian &stable-codename; main contrib non-free\n" +"deb http://security.debian.org/ &stable-codename;/updates main contrib non-free\n" " " #. type: Content of: <refentry><refsect1><title> @@ -9942,23 +9741,11 @@ msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> #: sources.list.5.xml:178 -#, fuzzy -#| msgid "more recongnizable URI types" msgid "more recognizable URI types" msgstr "Otros tipos de URI reconocidos." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #: sources.list.5.xml:180 -#, fuzzy -#| msgid "" -#| "APT can be extended with more methods shipped in other optional packages " -#| "which should follow the nameing scheme <literal>apt-transport-" -#| "<replaceable>method</replaceable></literal>. The APT team e.g. maintain " -#| "also the <literal>apt-transport-https</literal> package which provides " -#| "access methods for https-URIs with features similiar to the http method, " -#| "but other methods for using e.g. debtorrent are also available, see " -#| "<citerefentry> <refentrytitle><filename>apt-transport-debtorrent</" -#| "filename></refentrytitle> <manvolnum>1</manvolnum></citerefentry>." msgid "" "APT can be extended with more methods shipped in other optional packages " "which should follow the nameing scheme <literal>apt-transport-" @@ -10042,23 +9829,18 @@ msgstr "deb http://archive.debian.org/debian-archive hamm main" #. type: Content of: <refentry><refsect1><para> #: sources.list.5.xml:208 -#, fuzzy -#| msgid "" -#| "Uses FTP to access the archive at ftp.debian.org, under the debian " -#| "directory, and uses only the stable/contrib area." msgid "" "Uses FTP to access the archive at ftp.debian.org, under the debian " "directory, and uses only the &stable-codename;/contrib area." msgstr "" "Usa FTP para acceder al archivo de Debian en «ftp.debian.org», debajo del " -"directorio «debian», y usa sólo la sección «stable/contrib»." +"directorio «debian», y usa sólo la sección «&stable-codename;/contrib»." #. type: Content of: <refentry><refsect1><literallayout> #: sources.list.5.xml:210 -#, fuzzy, no-wrap -#| msgid "deb ftp://ftp.debian.org/debian stable contrib" +#, no-wrap msgid "deb ftp://ftp.debian.org/debian &stable-codename; contrib" -msgstr "deb ftp://ftp.debian.org/debian stable contrib" +msgstr "deb ftp://ftp.debian.org/debian &stable-codename; contrib" #. type: Content of: <refentry><refsect1><para> #: sources.list.5.xml:212 @@ -10238,13 +10020,6 @@ msgstr "" #. type: <p></p> #: guide.sgml:63 -#, fuzzy -#| msgid "" -#| "For instance, mailcrypt is an emacs extension that aids in encrypting " -#| "email with GPG. Without GPGP installed mail-crypt is useless, so " -#| "mailcrypt has a simple dependency on GPG. Also, because it is an emacs " -#| "extension it has a simple dependency on emacs, without emacs it is " -#| "completely useless." msgid "" "For instance, mailcrypt is an emacs extension that aids in encrypting email " "with GPG. Without GPGP installed mailcrypt is useless, so mailcrypt has a " @@ -10469,17 +10244,6 @@ msgstr "" #. type: <p></p> #: guide.sgml:184 -#, fuzzy -#| msgid "" -#| "To enable the APT method you need to to select [A]ccess in <prgn>dselect</" -#| "prgn> and then choose the APT method. You will be prompted for a set of " -#| "<em>Sources</em> which are places to fetch archives from. These can be " -#| "remote Internet sites, local Debian mirrors or CDROMs. Each source can " -#| "provide a fragment of the total Debian archive, APT will automatically " -#| "combine them to form a complete set of packages. If you have a CDROM then " -#| "it is a good idea to specify it first and then specify a mirror so that " -#| "you have access to the latest bug fixes. APT will automatically use " -#| "packages on your CDROM before downloading from the Internet." msgid "" "To enable the APT method you need to select [A]ccess in <prgn>dselect</prgn> " "and then choose the APT method. You will be prompted for a set of " @@ -10616,13 +10380,6 @@ msgstr "" #. type: <p></p> #: guide.sgml:247 -#, fuzzy -#| msgid "" -#| "Before starting to use <prgn>dselect</prgn> it is necessary to update the " -#| "available list by selecting [U]pdate from the menu. This is a super-set " -#| "of <tt>apt-get update</tt> that makes the fetched information available " -#| "to <prgn>dselect</prgn>. [U]pdate must be performed even if <tt>apt-get " -#| "update</tt> has been run before." msgid "" "Before starting to use <prgn>dselect</prgn> it is necessary to update the " "available list by selecting [U]pdate from the menu. This is a superset of " @@ -10631,8 +10388,8 @@ msgid "" "tt> has been run before." msgstr "" "Es necesario actualizar la lista disponible mediante el elemento de menú [A]" -"ctualizar antes de iniciar <prgn>dselect</prgn>. Éste es un super-conjunto " -"de <tt>apt-get update</tt> que permite a <prgn>dselect</prgn> disponer de la " +"ctualizar antes de iniciar <prgn>dselect</prgn>. Éste es un superconjunto de " +"<tt>apt-get update</tt> que permite a <prgn>dselect</prgn> disponer de la " "información obtenida. Debe ejecutar [A]ctualizar aunque haya ejecutado " "<tt>apt-get update</tt> con anterioridad." @@ -11311,12 +11068,6 @@ msgstr "" #. type: <p></p> #: offline.sgml:57 -#, fuzzy -#| msgid "" -#| "This is achieved by creatively manipulating the APT configuration file. " -#| "The essential premis to tell APT to look on a disc for it's archive " -#| "files. Note that the disc should be formated with a filesystem that can " -#| "handle long file names such as ext2, fat32 or vfat." msgid "" "This is achieved by creatively manipulating the APT configuration file. The " "essential premise to tell APT to look on a disc for it's archive files. Note " @@ -11465,13 +11216,6 @@ msgstr "" #. type: <p><example> #: offline.sgml:136 -#, fuzzy -#| msgid "" -#| "On the target machine the first thing to do is mount the disc and copy " -#| "<em>/var/lib/dpkg/status</em> to it. You will also need to create the " -#| "directories outlined in the Overview, <em>archives/partial/</em> and " -#| "<em>lists/partial/</em> Then take the disc to the remote machine and " -#| "configure the sources.list. On the remote machine execute the following:" msgid "" "On the target machine the first thing to do is mount the disc and copy <em>/" "var/lib/dpkg/status</em> to it. You will also need to create the directories " @@ -11482,8 +11226,8 @@ msgstr "" "Lo primero que debe hacer en el sistema destino es montar el disco y guardar " "en él una copia de <em>/var/lib/dpkg/status</em>. También debe crear los " "directorios definidos en el Resumen, <em>archives/partial/</em> y <em>lists/" -"partial/</em>. Lleve el disco hasta el sistema remoto y configure «sources." -"list». Ejecute lo siguiente en el sistema remoto:" +"partial/</em>. Después, lleve el disco hasta el sistema remoto y configure " +"«sources.list». Ejecute lo siguiente en el sistema remoto:" #. type: <example></example> #: offline.sgml:142 @@ -11504,12 +11248,6 @@ msgstr "" #. type: </example></p> #: offline.sgml:149 -#, fuzzy -#| msgid "" -#| "The dist-upgrade command can be replaced with any-other standard APT " -#| "commands, particularly dselect-upgrade. You can even use an APT front end " -#| "such as <em>dselect</em> However this presents a problem in communicating " -#| "your selections back to the local computer." msgid "" "The dist-upgrade command can be replaced with any other standard APT " "commands, particularly dselect-upgrade. You can even use an APT front end " -- cgit v1.2.3