From c7c7d3e8f12e68cd14470eec47db516c9b784cbe Mon Sep 17 00:00:00 2001 From: Christopher Baines Date: Sun, 7 Aug 2011 20:26:31 +0100 Subject: Improved errors and messages in general and improved the comments. Removed quite a bit of code I used while learning about how apt handles things. Added some extra checks and warnings relevent for Immediate Configuration. Removed a wierd section I put in to prevent a segfault at 724+, this appears no longer to be needed. --- apt-pkg/packagemanager.cc | 195 +++++++++++++++------------------------------- 1 file changed, 63 insertions(+), 132 deletions(-) (limited to 'apt-pkg/packagemanager.cc') diff --git a/apt-pkg/packagemanager.cc b/apt-pkg/packagemanager.cc index b3c3d2591..d956c001e 100644 --- a/apt-pkg/packagemanager.cc +++ b/apt-pkg/packagemanager.cc @@ -292,7 +292,11 @@ bool pkgPackageManager::ConfigureAll() if (List->IsFlag(Pkg,pkgOrderList::Configured)) continue; if (ConfigurePkgs == true && SmartConfigure(Pkg) == false) { - _error->Error("Internal error, packages left unconfigured. %s",Pkg.Name()); + if (ImmConfigureAll) + _error->Error(_("Could not perform immediate configuration on '%s'. " + "Please see man 5 apt.conf under APT::Immediate-Configure for details. (%d)"),Pkg.Name(),1); + else + _error->Error("Internal error, packages left unconfigured. %s",Pkg.Name()); return false; } @@ -304,19 +308,26 @@ bool pkgPackageManager::ConfigureAll() /*}}}*/ // PM::SmartConfigure - Perform immediate configuration of the pkg /*{{{*/ // --------------------------------------------------------------------- -/* This routine trys to put the system in a state where Pkg can be configured, - this involves checking each of Pkg's dependanies and unpacking and - configuring packages where needed. */ +/* This function tries to put the system in a state where Pkg can be configured. + This involves checking each of Pkg's dependanies and unpacking and + configuring packages where needed. + + Note on failure: This method can fail, without causing any problems. + This can happen when using Immediate-Configure-All, SmartUnPack may call + SmartConfigure, it may fail because of a complex dependancy situation, but + a error will only be reported if ConfigureAll fails. This is why some of the + messages this function reports on failure (return false;) as just warnings + only shown when debuging*/ bool pkgPackageManager::SmartConfigure(PkgIterator Pkg) { - if (Debug == true) + if (Debug) clog << "SmartConfigure " << Pkg.Name() << endl; VerIterator const instVer = Cache[Pkg].InstVerIter(Cache); /* Because of the ordered list, most dependancies should be unpacked, - however if there is a loop this is not the case, so check for dependancies before configuring. - This is done after the package installation as it makes it easier to deal with conflicts problems */ + however if there is a loop (A depends on B, B depends on A) this will not + be the case, so check for dependancies before configuring. */ bool Bad = false; for (DepIterator D = instVer.DependsList(); D.end() == false; ) @@ -335,63 +346,39 @@ bool pkgPackageManager::SmartConfigure(PkgIterator Pkg) VerIterator InstallVer; SPtrArray VList = Start.AllTargets(); + // Check through each version of each package that could satisfy this dependancy for (Version **I = VList; *I != 0; I++) { VerIterator Ver(Cache,*I); DepPkg = Ver.ParentPkg(); - - if (!Bad) continue; - InstallVer = VerIterator(Cache,Cache[DepPkg].InstallVer); - //VerIterator CandVer(Cache,Cache[DepPkg].CandidateVer); - - if (Debug) { - if (Ver==0) { - cout << " Checking if " << Ver << " of " << DepPkg.Name() << " satisfies this dependancy" << endl; - } else { - cout << " Checking if " << Ver.VerStr() << " of " << DepPkg.Name() << " satisfies this dependancy" << endl; - } - - if (DepPkg.CurrentVer()==0) { - cout << " CurrentVer " << DepPkg.CurrentVer() << " IsNow " << List->IsNow(DepPkg) << " NeedsNothing " << (DepPkg.State() == PkgIterator::NeedsNothing) << endl; - } else { - cout << " CurrentVer " << DepPkg.CurrentVer().VerStr() << " IsNow " << List->IsNow(DepPkg) << " NeedsNothing " << (DepPkg.State() == PkgIterator::NeedsNothing) << endl; - } - - if (InstallVer==0) { - cout << " InstallVer " << InstallVer << endl; - } else { - cout << " InstallVer " << InstallVer.VerStr() << endl; - } - //if (CandVer != 0) - // cout << " CandVer " << CandVer.VerStr() << endl; - - cout << " Keep " << Cache[DepPkg].Keep() << " Unpacked " << List->IsFlag(DepPkg,pkgOrderList::UnPacked) << " Configured " << List->IsFlag(DepPkg,pkgOrderList::Configured) << " Removed " << List->IsFlag(DepPkg,pkgOrderList::Removed) << endl; - - } - - // Check if it satisfies this dependancy + + // Check if the current version of the package is avalible and will satisfy this dependancy if (DepPkg.CurrentVer() == Ver && List->IsNow(DepPkg) == true && !List->IsFlag(DepPkg,pkgOrderList::Removed) && DepPkg.State() == PkgIterator::NeedsNothing) { Bad = false; - continue; + break; } + // Check if the version that is going to be installed will satisfy the dependancy if (Cache[DepPkg].InstallVer == *I) { if (List->IsFlag(DepPkg,pkgOrderList::UnPacked)) { + /* Check for a loop to prevent one forming + If A depends on B and B depends on A, SmartConfigure will + just hop between them if this is not checked */ if (!List->IsFlag(DepPkg,pkgOrderList::Loop)) { List->Flag(Pkg,pkgOrderList::Loop); - Bad = !SmartConfigure(DepPkg); - } else { - Bad = false; + // If SmartConfigure was succesfull, Bad is false, so break + if (!(Bad = !SmartConfigure(DepPkg))) break; } } else if (List->IsFlag(DepPkg,pkgOrderList::Configured)) { Bad = false; + break; } - continue; } } + /* If the dependany is still not satisfied, try, if possible, unpacking a package to satisfy it */ if (InstallVer != 0 && Bad) { Bad = false; List->Flag(Pkg,pkgOrderList::Loop); @@ -409,12 +396,17 @@ bool pkgPackageManager::SmartConfigure(PkgIterator Pkg) } } break; - } else { Start++; } } } + + if (Bad) { + if (Debug) + _error->Warning(_("Could not configure '%s'. "),Pkg.Name()); + return false; + } static std::string const conf = _config->Find("PackageManager::Configure","all"); static bool const ConfigurePkgs = (conf == "all" || conf == "smart"); @@ -439,9 +431,8 @@ bool pkgPackageManager::SmartConfigure(PkgIterator Pkg) } // Sanity Check - if (List->IsFlag(Pkg,pkgOrderList::Configured) == false && Debug) - _error->Warning(_("Could not perform immediate configuration on '%s'. " - "Please see man 5 apt.conf under APT::Immediate-Configure for details. (%d)"),Pkg.Name(),1); + if (List->IsFlag(Pkg,pkgOrderList::Configured) == false) + return _error->Error(_("Could not configure '%s'. "),Pkg.Name()); return true; } @@ -519,7 +510,7 @@ bool pkgPackageManager::SmartUnPack(PkgIterator Pkg) } bool pkgPackageManager::SmartUnPack(PkgIterator Pkg, bool const Immediate) { - if (Debug == true) + if (Debug) clog << "SmartUnPack " << Pkg.Name() << endl; // Check if it is already unpacked @@ -537,11 +528,12 @@ bool pkgPackageManager::SmartUnPack(PkgIterator Pkg, bool const Immediate) VerIterator const instVer = Cache[Pkg].InstVerIter(Cache); - /* PreUnpack Checks: This loop checks and attemps to rectify and problems that would prevent the package being unpacked. - It addresses: PreDepends, Conflicts, Obsoletes and DpkgBreaks. Any resolutions that do not require it should - avoid configuration (calling SmartUnpack with Immediate=true), this is because any loops before Pkg is unpacked - can cause problems. This will be either dealt with if the package is configured as a dependancy of - Pkg (if and when Pkg is configured), or by the ConfigureAll call at the end of the for loop in OrderInstall. */ + /* PreUnpack Checks: This loop checks and attempts to rectify and problems that would prevent the package being unpacked. + It addresses: PreDepends, Conflicts, Obsoletes and Breaks (DpkgBreaks). Any resolutions that do not require it should + avoid configuration (calling SmartUnpack with Immediate=true), this is because when unpacking some packages with + complex dependancy structures, trying to configure some packages while breaking the loops can complicate things . + This will be either dealt with if the package is configured as a dependency of Pkg (if and when Pkg is configured), + or by the ConfigureAll call at the end of the for loop in OrderInstall. */ for (DepIterator D = instVer.DependsList(); D.end() == false; ) { @@ -624,33 +616,9 @@ bool pkgPackageManager::SmartUnPack(PkgIterator Pkg, bool const Immediate) // See if the current version is conflicting if (ConflictPkg.CurrentVer() == Ver && List->IsNow(ConflictPkg)) - { - if (Debug && false) - cout << " " << Pkg.Name() << " conflicts with " << ConflictPkg.Name() << endl; - - if (Debug && false) { - if (Ver==0) { - cout << " Checking if " << Ver << " of " << ConflictPkg.Name() << " satisfies this dependancy" << endl; - } else { - cout << " Checking if " << Ver.VerStr() << " of " << ConflictPkg.Name() << " satisfies this dependancy" << endl; - } - - if (ConflictPkg.CurrentVer()==0) { - cout << " CurrentVer " << ConflictPkg.CurrentVer() << " IsNow " << List->IsNow(ConflictPkg) << " NeedsNothing " << (ConflictPkg.State() == PkgIterator::NeedsNothing) << endl; - } else { - cout << " CurrentVer " << ConflictPkg.CurrentVer().VerStr() << " IsNow " << List->IsNow(ConflictPkg) << " NeedsNothing " << (ConflictPkg.State() == PkgIterator::NeedsNothing) << endl; - } - - if (InstallVer==0) { - cout << " InstallVer " << InstallVer << endl; - } else { - cout << " InstallVer " << InstallVer.VerStr() << endl; - } - - cout << " Keep " << Cache[ConflictPkg].Keep() << " Unpacked " << List->IsFlag(ConflictPkg,pkgOrderList::UnPacked) << " Configured " << List->IsFlag(ConflictPkg,pkgOrderList::Configured) << " Removed " << List->IsFlag(ConflictPkg,pkgOrderList::Removed) << " Loop " << List->IsFlag(ConflictPkg,pkgOrderList::Loop) << endl; - cout << " Delete " << Cache[ConflictPkg].Delete() << endl; - } - + { + /* If a loop is not present or has not yet been detected, attempt to unpack packages + to resolve this conflict. If there is a loop present, remove packages to resolve this conflict */ if (!List->IsFlag(ConflictPkg,pkgOrderList::Loop)) { if (Cache[ConflictPkg].Keep() == 0 && Cache[ConflictPkg].InstallVer != 0) { if (Debug) @@ -682,28 +650,6 @@ bool pkgPackageManager::SmartUnPack(PkgIterator Pkg, bool const Immediate) PkgIterator BrokenPkg = Ver.ParentPkg(); VerIterator InstallVer(Cache,Cache[BrokenPkg].InstallVer); - if (Debug && false) { - if (Ver==0) { - cout << " Checking if " << Ver << " of " << BrokenPkg.Name() << " satisfies this dependancy" << endl; - } else { - cout << " Checking if " << Ver.VerStr() << " of " << BrokenPkg.Name() << " satisfies this dependancy" << endl; - } - - if (BrokenPkg.CurrentVer()==0) { - cout << " CurrentVer " << BrokenPkg.CurrentVer() << " IsNow " << List->IsNow(BrokenPkg) << " NeedsNothing " << (BrokenPkg.State() == PkgIterator::NeedsNothing) << endl; - } else { - cout << " CurrentVer " << BrokenPkg.CurrentVer().VerStr() << " IsNow " << List->IsNow(BrokenPkg) << " NeedsNothing " << (BrokenPkg.State() == PkgIterator::NeedsNothing) << endl; - } - - if (InstallVer==0) { - cout << " InstallVer " << InstallVer << endl; - } else { - cout << " InstallVer " << InstallVer.VerStr() << endl; - } - - cout << " Keep " << Cache[BrokenPkg].Keep() << " Unpacked " << List->IsFlag(BrokenPkg,pkgOrderList::UnPacked) << " Configured " << List->IsFlag(BrokenPkg,pkgOrderList::Configured) << " Removed " << List->IsFlag(BrokenPkg,pkgOrderList::Removed) << " Loop " << List->IsFlag(BrokenPkg,pkgOrderList::Loop) << " InList " << List->IsFlag(BrokenPkg,pkgOrderList::InList) << endl; - cout << " Delete " << Cache[BrokenPkg].Delete() << endl; - } // Check if it needs to be unpacked if (List->IsFlag(BrokenPkg,pkgOrderList::InList) && Cache[BrokenPkg].Delete() == false && !List->IsFlag(BrokenPkg,pkgOrderList::Loop) && List->IsNow(BrokenPkg)) { @@ -711,7 +657,7 @@ bool pkgPackageManager::SmartUnPack(PkgIterator Pkg, bool const Immediate) // Found a break, so unpack the package if (Debug) cout << " Unpacking " << BrokenPkg.Name() << " to avoid break" << endl; - /* */ + SmartUnPack(BrokenPkg, false); } // Check if a package needs to be removed @@ -724,43 +670,27 @@ bool pkgPackageManager::SmartUnPack(PkgIterator Pkg, bool const Immediate) } } - // FIXME: Crude but effective fix, allows the SmartUnPack method to be used for packages that new to the system - if (instVer != 0) { - //cout << "Check for reverse conflicts on " << Pkg.Name() << " " << instVer.VerStr() << endl; - - // Check for reverse conflicts. - if (CheckRConflicts(Pkg,Pkg.RevDependsList(), + // Check for reverse conflicts. + if (CheckRConflicts(Pkg,Pkg.RevDependsList(), instVer.VerStr()) == false) - return false; + return false; - for (PrvIterator P = instVer.ProvidesList(); + for (PrvIterator P = instVer.ProvidesList(); P.end() == false; P++) CheckRConflicts(Pkg,P.ParentPkg().RevDependsList(),P.ProvideVersion()); - List->Flag(Pkg,pkgOrderList::UnPacked,pkgOrderList::States); + List->Flag(Pkg,pkgOrderList::UnPacked,pkgOrderList::States); - if (instVer->MultiArch == pkgCache::Version::Same) - for (PkgIterator P = Pkg.Group().PackageList(); - P.end() == false; P = Pkg.Group().NextPkg(P)) - { - if (Pkg == P || List->IsFlag(P,pkgOrderList::UnPacked) == true || + if (instVer->MultiArch == pkgCache::Version::Same) + for (PkgIterator P = Pkg.Group().PackageList(); + P.end() == false; P = Pkg.Group().NextPkg(P)) + { + if (Pkg == P || List->IsFlag(P,pkgOrderList::UnPacked) == true || Cache[P].InstallVer == 0 || (P.CurrentVer() == Cache[P].InstallVer && (Cache[Pkg].iFlags & pkgDepCache::ReInstall) != pkgDepCache::ReInstall)) - continue; + continue; SmartUnPack(P, false); - } - - } else { - VerIterator InstallVer(Cache,Cache[Pkg].InstallVer); - //cout << "Check for reverse conflicts on " << Pkg.Name() << " " << InstallVer.VerStr() << endl; - - // Check for reverse conflicts. - if (CheckRConflicts(Pkg,Pkg.RevDependsList(), - InstallVer.VerStr()) == false) - return false; - - List->Flag(Pkg,pkgOrderList::UnPacked,pkgOrderList::States); - } + } if(Install(Pkg,FileNames[Pkg->ID]) == false) return false; @@ -855,7 +785,8 @@ pkgPackageManager::OrderResult pkgPackageManager::OrderInstall() if (ImmConfigureAll) { /* ConfigureAll here to pick up and packages left unconfigured becuase they were unpacked in the "PreUnpack Checks" section */ - ConfigureAll(); + if (!ConfigureAll()) + return Failed; } } -- cgit v1.2.3