From 98ee49227a1f1669306cbfc1b15c5243ed13cc8a Mon Sep 17 00:00:00 2001 From: David Kalnischkies Date: Tue, 13 Mar 2012 12:39:05 +0100 Subject: recheck dependencies in SmartUnpack after a change, too --- apt-pkg/packagemanager.cc | 361 +++++++++++++++++++++++++--------------------- 1 file changed, 196 insertions(+), 165 deletions(-) (limited to 'apt-pkg') diff --git a/apt-pkg/packagemanager.cc b/apt-pkg/packagemanager.cc index 5ba1225a0..73637d071 100644 --- a/apt-pkg/packagemanager.cc +++ b/apt-pkg/packagemanager.cc @@ -590,198 +590,229 @@ bool pkgPackageManager::SmartUnPack(PkgIterator Pkg, bool const Immediate, int c VerIterator const instVer = Cache[Pkg].InstVerIter(Cache); /* PreUnpack Checks: This loop checks and attempts to rectify and problems that would prevent the package being unpacked. - It addresses: PreDepends, Conflicts, Obsoletes and Breaks (DpkgBreaks). Any resolutions that do not require it should + It addresses: PreDepends, Conflicts, Obsoletes and Breaks (DpkgBreaks). Any resolutions that do not require it should avoid configuration (calling SmartUnpack with Immediate=true), this is because when unpacking some packages with - complex dependancy structures, trying to configure some packages while breaking the loops can complicate things . - This will be either dealt with if the package is configured as a dependency of Pkg (if and when Pkg is configured), + complex dependancy structures, trying to configure some packages while breaking the loops can complicate things . + This will be either dealt with if the package is configured as a dependency of Pkg (if and when Pkg is configured), or by the ConfigureAll call at the end of the for loop in OrderInstall. */ - for (DepIterator D = instVer.DependsList(); - D.end() == false; ) - { - // Compute a single dependency element (glob or) - pkgCache::DepIterator Start; - pkgCache::DepIterator End; - D.GlobOr(Start,End); - - while (End->Type == pkgCache::Dep::PreDepends) + bool Changed = false; + do { + Changed = false; + for (DepIterator D = instVer.DependsList(); D.end() == false; ) { - if (Debug) - clog << OutputInDepth(Depth) << "PreDepends order for " << Pkg.FullName() << std::endl; + // Compute a single dependency element (glob or) + pkgCache::DepIterator Start, End; + D.GlobOr(Start,End); - // Look for possible ok targets. - SPtrArray VList = Start.AllTargets(); - bool Bad = true; - for (Version **I = VList; *I != 0 && Bad == true; I++) - { - VerIterator Ver(Cache,*I); - PkgIterator Pkg = Ver.ParentPkg(); - - // See if the current version is ok - if (Pkg.CurrentVer() == Ver && List->IsNow(Pkg) == true && - Pkg.State() == PkgIterator::NeedsNothing) + if (End->Type == pkgCache::Dep::PreDepends) + { + bool Bad = true; + if (Debug) + clog << OutputInDepth(Depth) << "PreDepends order for " << Pkg.FullName() << std::endl; + + // Look for easy targets: packages that are already okay + for (DepIterator Cur = Start; Bad == true; ++Cur) { - Bad = false; - if (Debug) - clog << OutputInDepth(Depth) << "Found ok package " << Pkg.FullName() << endl; - continue; - } - } - - // Look for something that could be configured. - for (Version **I = VList; *I != 0 && Bad == true; I++) - { - VerIterator Ver(Cache,*I); - PkgIterator Pkg = Ver.ParentPkg(); - - // Not the install version - if (Cache[Pkg].InstallVer != *I || - (Cache[Pkg].Keep() == true && Pkg.State() == PkgIterator::NeedsNothing)) - continue; - - if (List->IsFlag(Pkg,pkgOrderList::Configured)) { - Bad = false; - continue; + SPtrArray VList = Start.AllTargets(); + for (Version **I = VList; *I != 0; ++I) + { + VerIterator Ver(Cache,*I); + PkgIterator Pkg = Ver.ParentPkg(); + + // See if the current version is ok + if (Pkg.CurrentVer() == Ver && List->IsNow(Pkg) == true && + Pkg.State() == PkgIterator::NeedsNothing) + { + Bad = false; + if (Debug) + clog << OutputInDepth(Depth) << "Found ok package " << Pkg.FullName() << endl; + break; + } + } + if (Cur == End) + break; } - // check if it needs unpack or if if configure is enough - if (!List->IsFlag(Pkg,pkgOrderList::UnPacked)) - { - if (Debug) - clog << OutputInDepth(Depth) << "Trying to SmartUnpack " << Pkg.FullName() << endl; - // SmartUnpack with the ImmediateFlag to ensure its really ready - Bad = !SmartUnPack(Pkg, true, Depth + 1); - } else { - if (Debug) - clog << OutputInDepth(Depth) << "Trying to SmartConfigure " << Pkg.FullName() << endl; - Bad = !SmartConfigure(Pkg, Depth + 1); - } - } + // Look for something that could be configured. + for (DepIterator Cur = Start; Bad == true; ++Cur) + { + SPtrArray VList = Start.AllTargets(); + for (Version **I = VList; *I != 0; ++I) + { + VerIterator Ver(Cache,*I); + PkgIterator Pkg = Ver.ParentPkg(); - /* If this or element did not match then continue on to the - next or element until a matching element is found */ - if (Bad == true) - { - // This triggers if someone make a pre-depends/depend loop. - if (Start == End) - return _error->Error("Couldn't configure pre-depend %s for %s, " - "probably a dependency cycle.", - End.TargetPkg().FullName().c_str(),Pkg.FullName().c_str()); - ++Start; - } - else - break; - } - - if (End->Type == pkgCache::Dep::Conflicts || - End->Type == pkgCache::Dep::Obsoletes) - { - /* Look for conflicts. Two packages that are both in the install - state cannot conflict so we don't check.. */ - SPtrArray VList = End.AllTargets(); - for (Version **I = VList; *I != 0; I++) - { - VerIterator Ver(Cache,*I); - PkgIterator ConflictPkg = Ver.ParentPkg(); - VerIterator InstallVer(Cache,Cache[ConflictPkg].InstallVer); - - // See if the current version is conflicting - if (ConflictPkg.CurrentVer() == Ver && List->IsNow(ConflictPkg)) - { - cout << OutputInDepth(Depth) << Pkg.FullName() << " conflicts with " << ConflictPkg.FullName() << endl; - /* If a loop is not present or has not yet been detected, attempt to unpack packages - to resolve this conflict. If there is a loop present, remove packages to resolve this conflict */ - if (!List->IsFlag(ConflictPkg,pkgOrderList::Loop)) { - if (Cache[ConflictPkg].Keep() == 0 && Cache[ConflictPkg].InstallVer != 0) { - if (Debug) - cout << OutputInDepth(Depth) << OutputInDepth(Depth) << "Unpacking " << ConflictPkg.FullName() << " to prevent conflict" << endl; - List->Flag(Pkg,pkgOrderList::Loop); - SmartUnPack(ConflictPkg,false, Depth + 1); - // Remove loop to allow it to be used later if needed - List->RmFlag(Pkg,pkgOrderList::Loop); - } else { - if (EarlyRemove(ConflictPkg) == false) - return _error->Error("Internal Error, Could not early remove %s",ConflictPkg.FullName().c_str()); - } - } else { - if (!List->IsFlag(ConflictPkg,pkgOrderList::Removed)) { - if (Debug) - cout << OutputInDepth(Depth) << "Because of conficts knot, removing " << ConflictPkg.FullName() << " to conflict violation" << endl; - if (EarlyRemove(ConflictPkg) == false) - return _error->Error("Internal Error, Could not early remove %s",ConflictPkg.FullName().c_str()); - } + // Not the install version + if (Cache[Pkg].InstallVer != *I || + (Cache[Pkg].Keep() == true && Pkg.State() == PkgIterator::NeedsNothing)) + continue; + + if (List->IsFlag(Pkg,pkgOrderList::Configured)) + { + Bad = false; + break; + } + + // check if it needs unpack or if if configure is enough + if (List->IsFlag(Pkg,pkgOrderList::UnPacked) == false) + { + if (Debug) + clog << OutputInDepth(Depth) << "Trying to SmartUnpack " << Pkg.FullName() << endl; + // SmartUnpack with the ImmediateFlag to ensure its really ready + if (SmartUnPack(Pkg, true, Depth + 1) == true) + { + Bad = false; + if (List->IsFlag(Pkg,pkgOrderList::Loop) == false) + Changed = true; + break; + } + } + else + { + if (Debug) + clog << OutputInDepth(Depth) << "Trying to SmartConfigure " << Pkg.FullName() << endl; + if (SmartConfigure(Pkg, Depth + 1) == true) + { + Bad = false; + if (List->IsFlag(Pkg,pkgOrderList::Loop) == false) + Changed = true; + break; + } + } } } + + if (Bad == true) + { + if (Start == End) + return _error->Error("Couldn't configure pre-depend %s for %s, " + "probably a dependency cycle.", + End.TargetPkg().FullName().c_str(),Pkg.FullName().c_str()); + } + else + continue; } - } - - // Check for breaks - if (End->Type == pkgCache::Dep::DpkgBreaks) { - SPtrArray VList = End.AllTargets(); - for (Version **I = VList; *I != 0; I++) + else if (End->Type == pkgCache::Dep::Conflicts || + End->Type == pkgCache::Dep::Obsoletes) { - VerIterator Ver(Cache,*I); - PkgIterator BrokenPkg = Ver.ParentPkg(); - if (BrokenPkg.CurrentVer() != Ver) + /* Look for conflicts. Two packages that are both in the install + state cannot conflict so we don't check.. */ + SPtrArray VList = End.AllTargets(); + for (Version **I = VList; *I != 0; I++) { - if (Debug) - std::clog << OutputInDepth(Depth) << " Ignore not-installed version " << Ver.VerStr() << " of " << Pkg.FullName() << " for " << End << std::endl; - continue; - } + VerIterator Ver(Cache,*I); + PkgIterator ConflictPkg = Ver.ParentPkg(); + VerIterator InstallVer(Cache,Cache[ConflictPkg].InstallVer); - // Check if it needs to be unpacked - if (List->IsFlag(BrokenPkg,pkgOrderList::InList) && Cache[BrokenPkg].Delete() == false && - List->IsNow(BrokenPkg)) { - if (List->IsFlag(BrokenPkg,pkgOrderList::Loop) && PkgLoop) { - // This dependancy has already been dealt with by another SmartUnPack on Pkg - break; - } else { - // Found a break, so see if we can unpack the package to avoid it - // but do not set loop if another SmartUnPack already deals with it - VerIterator InstallVer(Cache,Cache[BrokenPkg].InstallVer); - bool circle = false; - for (pkgCache::DepIterator D = InstallVer.DependsList(); D.end() == false; ++D) + // See if the current version is conflicting + if (ConflictPkg.CurrentVer() == Ver && List->IsNow(ConflictPkg)) + { + cout << OutputInDepth(Depth) << Pkg.FullName() << " conflicts with " << ConflictPkg.FullName() << endl; + /* If a loop is not present or has not yet been detected, attempt to unpack packages + to resolve this conflict. If there is a loop present, remove packages to resolve this conflict */ + if (List->IsFlag(ConflictPkg,pkgOrderList::Loop) == false) { - if (D->Type != pkgCache::Dep::PreDepends) - continue; - SPtrArray VL = D.AllTargets(); - for (Version **I = VL; *I != 0; ++I) + if (Cache[ConflictPkg].Keep() == 0 && Cache[ConflictPkg].InstallVer != 0) { - VerIterator V(Cache,*I); - PkgIterator P = V.ParentPkg(); - // we are checking for installation as an easy 'protection' against or-groups and (unchosen) providers - if (P->CurrentVer == 0 || P != Pkg || (P.CurrentVer() != V && Cache[P].InstallVer != V)) - continue; - circle = true; - break; + if (Debug) + cout << OutputInDepth(Depth) << OutputInDepth(Depth) << "Unpacking " << ConflictPkg.FullName() << " to prevent conflict" << endl; + List->Flag(Pkg,pkgOrderList::Loop); + if (SmartUnPack(ConflictPkg,false, Depth + 1) == true) + if (List->IsFlag(ConflictPkg,pkgOrderList::Loop) == false) + Changed = true; + // Remove loop to allow it to be used later if needed + List->RmFlag(Pkg,pkgOrderList::Loop); } - if (circle == true) - break; + else if (EarlyRemove(ConflictPkg) == false) + return _error->Error("Internal Error, Could not early remove %s (1)",ConflictPkg.FullName().c_str()); } - if (circle == true) + else if (List->IsFlag(ConflictPkg,pkgOrderList::Removed) == false) { if (Debug) - cout << OutputInDepth(Depth) << " Avoiding " << End << " avoided as " << BrokenPkg.FullName() << " has a pre-depends on " << Pkg.FullName() << std::endl; - continue; + cout << OutputInDepth(Depth) << "Because of conficts knot, removing " << ConflictPkg.FullName() << " to conflict violation" << endl; + if (EarlyRemove(ConflictPkg) == false) + return _error->Error("Internal Error, Could not early remove %s (2)",ConflictPkg.FullName().c_str()); + } + } + } + } + else if (End->Type == pkgCache::Dep::DpkgBreaks) + { + SPtrArray VList = End.AllTargets(); + for (Version **I = VList; *I != 0; ++I) + { + VerIterator Ver(Cache,*I); + PkgIterator BrokenPkg = Ver.ParentPkg(); + if (BrokenPkg.CurrentVer() != Ver) + { + if (Debug) + std::clog << OutputInDepth(Depth) << " Ignore not-installed version " << Ver.VerStr() << " of " << Pkg.FullName() << " for " << End << std::endl; + continue; + } + + // Check if it needs to be unpacked + if (List->IsFlag(BrokenPkg,pkgOrderList::InList) && Cache[BrokenPkg].Delete() == false && + List->IsNow(BrokenPkg)) + { + if (List->IsFlag(BrokenPkg,pkgOrderList::Loop) && PkgLoop) + { + // This dependancy has already been dealt with by another SmartUnPack on Pkg + break; } else { - if (Debug) + // Found a break, so see if we can unpack the package to avoid it + // but do not set loop if another SmartUnPack already deals with it + // Also, avoid it if the package we would unpack pre-depends on this one + VerIterator InstallVer(Cache,Cache[BrokenPkg].InstallVer); + bool circle = false; + for (pkgCache::DepIterator D = InstallVer.DependsList(); D.end() == false; ++D) { - cout << OutputInDepth(Depth) << " Unpacking " << BrokenPkg.FullName() << " to avoid " << End; - if (PkgLoop == true) - cout << " (Looping)"; - cout << std::endl; + if (D->Type != pkgCache::Dep::PreDepends) + continue; + SPtrArray VL = D.AllTargets(); + for (Version **I = VL; *I != 0; ++I) + { + VerIterator V(Cache,*I); + PkgIterator P = V.ParentPkg(); + // we are checking for installation as an easy 'protection' against or-groups and (unchosen) providers + if (P->CurrentVer == 0 || P != Pkg || (P.CurrentVer() != V && Cache[P].InstallVer != V)) + continue; + circle = true; + break; + } + if (circle == true) + break; + } + if (circle == true) + { + if (Debug) + cout << OutputInDepth(Depth) << " Avoiding " << End << " avoided as " << BrokenPkg.FullName() << " has a pre-depends on " << Pkg.FullName() << std::endl; + continue; + } + else + { + if (Debug) + { + cout << OutputInDepth(Depth) << " Unpacking " << BrokenPkg.FullName() << " to avoid " << End; + if (PkgLoop == true) + cout << " (Looping)"; + cout << std::endl; + } + if (PkgLoop == false) + List->Flag(Pkg,pkgOrderList::Loop); + if (SmartUnPack(BrokenPkg, false, Depth + 1) == true) + { + if (List->IsFlag(BrokenPkg,pkgOrderList::Loop) == false) + Changed = true; + } + if (PkgLoop == false) + List->RmFlag(Pkg,pkgOrderList::Loop); } - if (PkgLoop == false) - List->Flag(Pkg,pkgOrderList::Loop); - SmartUnPack(BrokenPkg, false, Depth + 1); - if (PkgLoop == false) - List->RmFlag(Pkg,pkgOrderList::Loop); } } - } else { // Check if a package needs to be removed - if (Cache[BrokenPkg].Delete() == true && !List->IsFlag(BrokenPkg,pkgOrderList::Configured)) + else if (Cache[BrokenPkg].Delete() == true && List->IsFlag(BrokenPkg,pkgOrderList::Configured) == false) { if (Debug) cout << OutputInDepth(Depth) << " Removing " << BrokenPkg.FullName() << " to avoid " << End << endl; @@ -790,7 +821,7 @@ bool pkgPackageManager::SmartUnPack(PkgIterator Pkg, bool const Immediate, int c } } } - } + } while (Changed == true); // Check for reverse conflicts. if (CheckRConflicts(Pkg,Pkg.RevDependsList(), -- cgit v1.2.3