From 5ff8dd6bd1c30c29a7398e339d3bdeaffe2f4489 Mon Sep 17 00:00:00 2001
From: Julian Andres Klode <jak@debian.org>
Date: Sat, 11 Jun 2016 17:24:13 +0200
Subject: Release 1.3~exp2

---
 doc/po/it.po | 193 ++++++++++++++++++++++++++++++++++++++++++++---------------
 1 file changed, 145 insertions(+), 48 deletions(-)

(limited to 'doc/po/it.po')

diff --git a/doc/po/it.po b/doc/po/it.po
index 4025eebbf..d4f4f8983 100644
--- a/doc/po/it.po
+++ b/doc/po/it.po
@@ -10,7 +10,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: apt-doc 1.0.5\n"
 "Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
-"POT-Creation-Date: 2016-05-11 10:50+0200\n"
+"POT-Creation-Date: 2016-06-11 17:24+0200\n"
 "PO-Revision-Date: 2015-12-27 21:26+0200\n"
 "Last-Translator: Beatrice Torracca <beatricet@libero.it>\n"
 "Language-Team: Italian <debian-l10n-italian@lists.debian.org>\n"
@@ -1637,9 +1637,13 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-get.8.xml
+#, fuzzy
+#| msgid ""
+#| "Show upgraded packages; print out a list of all packages that are to be "
+#| "upgraded.  Configuration Item: <literal>APT::Get::Show-Upgraded</literal>."
 msgid ""
-"Show upgraded packages; print out a list of all packages that are to be "
-"upgraded.  Configuration Item: <literal>APT::Get::Show-Upgraded</literal>."
+"Do not show a list of all packages that are to be upgraded.  Configuration "
+"Item: <literal>APT::Get::Show-Upgraded</literal>."
 msgstr ""
 "Mostra i pacchetti aggiornati; stampa un elenco di tutti i pacchetti che "
 "devono essere aggiornati. Voce di configurazione: <literal>APT::Get::Show-"
@@ -2576,11 +2580,10 @@ msgstr ""
 msgid ""
 "Per default <command>depends</command> and <command>rdepends</command> print "
 "only dependencies explicitly expressed in the metadata. With this flag it "
-"will also show dependencies implicitly added based on the encountered "
-"data.  A <literal>Conflicts: foo</literal> e.g. expresses implicitly that "
-"this package also conflicts with the package foo from any other "
-"architecture.  Configuration Item: <literal>APT::Cache::ShowImplicit</"
-"literal>."
+"will also show dependencies implicitly added based on the encountered data.  "
+"A <literal>Conflicts: foo</literal> e.g. expresses implicitly that this "
+"package also conflicts with the package foo from any other architecture.  "
+"Configuration Item: <literal>APT::Cache::ShowImplicit</literal>."
 msgstr ""
 "In modo predefinito <command>depends</command> e <command>rdepends</command> "
 "stampano solo le dipendenze esplicitamente espresse nei metadati. Con questa "
@@ -4045,6 +4048,33 @@ msgstr ""
 "literal>), e le altre architetture vengono aggiunte all'elenco predefinito "
 "quando sono registrate con <command>dpkg --add-architecture</command>."
 
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml
+msgid ""
+"This scope defines which compression formats are supported, how compression "
+"and decompression can be performed if support for this format isn't built "
+"into apt directly and a cost-value indicating how costly it is to compress "
+"something in this format. As an example the following configuration stanza "
+"would allow apt to download and uncompress as well as create and store files "
+"with the low-cost <literal>.reversed</literal> file extension which it will "
+"pass to the command <command>rev</command> without additional commandline "
+"parameters for compression and uncompression:"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><informalexample><programlisting>
+#: apt.conf.5.xml
+#, no-wrap
+msgid ""
+"APT::Compressor::rev {\n"
+"\tName \"rev\";\n"
+"\tExtension \".reversed\";\n"
+"\tBinary \"rev\";\n"
+"\tCompressArg {};\n"
+"\tUncompressArg {};\n"
+"\tCost \"10\";\n"
+"};\n"
+msgstr ""
+
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt.conf.5.xml
 msgid ""
@@ -4751,14 +4781,23 @@ msgstr "Acquire::CompressionTypes::<replaceable>EstensioneFile</replaceable> \"<
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt.conf.5.xml
+#, fuzzy
+#| msgid ""
+#| "List of compression types which are understood by the acquire methods.  "
+#| "Files like <filename>Packages</filename> can be available in various "
+#| "compression formats.  By default the acquire methods can decompress "
+#| "<command>bzip2</command>, <command>lzma</command> and <command>gzip</"
+#| "command> compressed files; with this setting more formats can be added on "
+#| "the fly or the used method can be changed. The syntax for this is: "
+#| "<placeholder type=\"synopsis\" id=\"0\"/>"
 msgid ""
 "List of compression types which are understood by the acquire methods.  "
 "Files like <filename>Packages</filename> can be available in various "
-"compression formats.  By default the acquire methods can decompress "
-"<command>bzip2</command>, <command>lzma</command> and <command>gzip</"
-"command> compressed files; with this setting more formats can be added on "
-"the fly or the used method can be changed. The syntax for this is: "
-"<placeholder type=\"synopsis\" id=\"0\"/>"
+"compression formats.  By default the acquire methods can decompress and "
+"recompress many common formats like <command>xz</command> and <command>gzip</"
+"command>; with this scope the supported formats can be queried, modified as "
+"well as support for more formats added (see also <option>APT::Compressor</"
+"option>). The syntax for this is: <placeholder type=\"synopsis\" id=\"0\"/>"
 msgstr ""
 "Elenco di tipi di compressione che sono capiti dai metodi di acquisizione. I "
 "file come <filename>Packages</filename> possono essere disponibili in vari "
@@ -4776,26 +4815,41 @@ msgstr "Acquire::CompressionTypes::Order:: \"gz\";"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis>
 #: apt.conf.5.xml
-#, no-wrap
-msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
+#, fuzzy, no-wrap
+#| msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
+msgid "Acquire::CompressionTypes::Order { \"xz\"; \"gz\"; };"
 msgstr "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt.conf.5.xml
+#, fuzzy
+#| msgid ""
+#| "Also, the <literal>Order</literal> subgroup can be used to define in "
+#| "which order the acquire system will try to download the compressed files. "
+#| "The acquire system will try the first and proceed with the next "
+#| "compression type in this list on error, so to prefer one over the other "
+#| "type simply add the preferred type first - default types not already "
+#| "added will be implicitly appended to the end of the list, so e.g. "
+#| "<placeholder type=\"synopsis\" id=\"0\"/> can be used to prefer "
+#| "<command>gzip</command> compressed files over <command>bzip2</command> "
+#| "and <command>lzma</command>.  If <command>lzma</command> should be "
+#| "preferred over <command>gzip</command> and <command>bzip2</command> the "
+#| "configure setting should look like this: <placeholder type=\"synopsis\" "
+#| "id=\"1\"/> It is not needed to add <literal>bz2</literal> to the list "
+#| "explicitly as it will be added automatically."
 msgid ""
 "Also, the <literal>Order</literal> subgroup can be used to define in which "
 "order the acquire system will try to download the compressed files. The "
 "acquire system will try the first and proceed with the next compression type "
 "in this list on error, so to prefer one over the other type simply add the "
-"preferred type first - default types not already added will be implicitly "
-"appended to the end of the list, so e.g. <placeholder type=\"synopsis\" id="
-"\"0\"/> can be used to prefer <command>gzip</command> compressed files over "
-"<command>bzip2</command> and <command>lzma</command>.  If <command>lzma</"
-"command> should be preferred over <command>gzip</command> and "
-"<command>bzip2</command> the configure setting should look like this: "
-"<placeholder type=\"synopsis\" id=\"1\"/> It is not needed to add "
-"<literal>bz2</literal> to the list explicitly as it will be added "
-"automatically."
+"preferred type first - types not already added will be implicitly appended "
+"to the end of the list, so e.g. <placeholder type=\"synopsis\" id=\"0\"/> "
+"can be used to prefer <command>gzip</command> compressed files over all "
+"other compression formats.  If <command>xz</command> should be preferred "
+"over <command>gzip</command> and <command>bzip2</command> the configure "
+"setting should look like this: <placeholder type=\"synopsis\" id=\"1\"/> It "
+"is not needed to add <literal>bz2</literal> to the list explicitly as it "
+"will be added automatically."
 msgstr ""
 "Inoltre si può usare il sottogruppo <literal>Order</literal> per definire in "
 "quale ordine il sistema di acquisizione cerca di scaricare i file compressi. "
@@ -4819,17 +4873,30 @@ msgstr "Dir::Bin::bzip2 \"/bin/bzip2\";"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt.conf.5.xml
+#, fuzzy
+#| msgid ""
+#| "Note that the <literal>Dir::Bin::<replaceable>Methodname</replaceable></"
+#| "literal> will be checked at run time. If this option has been set, the "
+#| "method will only be used if this file exists; e.g. for the "
+#| "<literal>bzip2</literal> method (the inbuilt) setting is: <placeholder "
+#| "type=\"literallayout\" id=\"0\"/> Note also that list entries specified "
+#| "on the command line will be added at the end of the list specified in the "
+#| "configuration files, but before the default entries. To prefer a type in "
+#| "this case over the ones specified in the configuration files you can set "
+#| "the option direct - not in list style.  This will not override the "
+#| "defined list; it will only prefix the list with this type."
 msgid ""
 "Note that the <literal>Dir::Bin::<replaceable>Methodname</replaceable></"
-"literal> will be checked at run time. If this option has been set, the "
-"method will only be used if this file exists; e.g. for the <literal>bzip2</"
-"literal> method (the inbuilt) setting is: <placeholder type=\"literallayout"
-"\" id=\"0\"/> Note also that list entries specified on the command line will "
-"be added at the end of the list specified in the configuration files, but "
-"before the default entries. To prefer a type in this case over the ones "
-"specified in the configuration files you can set the option direct - not in "
-"list style.  This will not override the defined list; it will only prefix "
-"the list with this type."
+"literal> will be checked at run time. If this option has been set and "
+"support for this format isn't directly built into apt, the method will only "
+"be used if this file exists; e.g. for the <literal>bzip2</literal> method "
+"(the inbuilt) setting is: <placeholder type=\"literallayout\" id=\"0\"/> "
+"Note also that list entries specified on the command line will be added at "
+"the end of the list specified in the configuration files, but before the "
+"default entries. To prefer a type in this case over the ones specified in "
+"the configuration files you can set the option direct - not in list style.  "
+"This will not override the defined list; it will only prefix the list with "
+"this type."
 msgstr ""
 "Notare che <literal>Dir::Bin::<replaceable>NomeMetodo</replaceable></"
 "literal> viene controllata al momento dell'esecuzione. Se questa opzione è "
@@ -8769,17 +8836,31 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-ftparchive.1.xml
+#, fuzzy
+#| msgid ""
+#| "The <literal>release</literal> command generates a Release file from a "
+#| "directory tree. It recursively searches the given directory for "
+#| "uncompressed <filename>Packages</filename> and <filename>Sources</"
+#| "filename> files and ones compressed with <command>gzip</command>, "
+#| "<command>bzip2</command> or <command>lzma</command> as well as "
+#| "<filename>Release</filename> and <filename>md5sum.txt</filename> files by "
+#| "default (<literal>APT::FTPArchive::Release::Default-Patterns</literal>). "
+#| "Additional filename patterns can be added by listing them in "
+#| "<literal>APT::FTPArchive::Release::Patterns</literal>.  It then writes to "
+#| "stdout a <filename>Release</filename> file containing (by default) an "
+#| "MD5, SHA1, SHA256 and SHA512 digest for each file."
 msgid ""
 "The <literal>release</literal> command generates a Release file from a "
 "directory tree. It recursively searches the given directory for uncompressed "
-"<filename>Packages</filename> and <filename>Sources</filename> files and "
-"ones compressed with <command>gzip</command>, <command>bzip2</command> or "
-"<command>lzma</command> as well as <filename>Release</filename> and "
-"<filename>md5sum.txt</filename> files by default (<literal>APT::FTPArchive::"
-"Release::Default-Patterns</literal>). Additional filename patterns can be "
-"added by listing them in <literal>APT::FTPArchive::Release::Patterns</"
-"literal>.  It then writes to stdout a <filename>Release</filename> file "
-"containing (by default) an MD5, SHA1, SHA256 and SHA512 digest for each file."
+"and compressed <filename>Packages</filename>, <filename>Sources</filename>, "
+"<filename>Contents</filename>, <filename>Components</filename> and "
+"<filename>icons</filename> files as well as <filename>Release</filename>, "
+"<filename>Index</filename> and <filename>md5sum.txt</filename> files by "
+"default (<literal>APT::FTPArchive::Release::Default-Patterns</literal>).  "
+"Additional filename patterns can be added by listing them in <literal>APT::"
+"FTPArchive::Release::Patterns</literal>.  It then writes to stdout a "
+"<filename>Release</filename> file containing (by default) an MD5, SHA1, "
+"SHA256 and SHA512 digest for each file."
 msgstr ""
 "Il comando <literal>release</literal> genera un file Release da un albero di "
 "directory. In modo predefinito cerca ricorsivamente nella directory data i "
@@ -8795,15 +8876,25 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-ftparchive.1.xml
+#, fuzzy
+#| msgid ""
+#| "Values for the additional metadata fields in the Release file are taken "
+#| "from the corresponding variables under <literal>APT::FTPArchive::Release</"
+#| "literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>.  The "
+#| "supported fields are: <literal>Origin</literal>, <literal>Label</"
+#| "literal>, <literal>Suite</literal>, <literal>Version</literal>, "
+#| "<literal>Codename</literal>, <literal>Date</literal>, <literal>Valid-"
+#| "Until</literal>, <literal>Architectures</literal>, <literal>Components</"
+#| "literal>, <literal>Description</literal>."
 msgid ""
 "Values for the additional metadata fields in the Release file are taken from "
 "the corresponding variables under <literal>APT::FTPArchive::Release</"
-"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>.  The "
-"supported fields are: <literal>Origin</literal>, <literal>Label</literal>, "
+"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The "
+"supported fields are <literal>Origin</literal>, <literal>Label</literal>, "
 "<literal>Suite</literal>, <literal>Version</literal>, <literal>Codename</"
 "literal>, <literal>Date</literal>, <literal>Valid-Until</literal>, "
-"<literal>Architectures</literal>, <literal>Components</literal>, "
-"<literal>Description</literal>."
+"<literal>Signed-By</literal>, <literal>Architectures</literal>, "
+"<literal>Components</literal> and <literal>Description</literal>."
 msgstr ""
 "I valori dei campi di metadati aggiuntivi nel file Release sono presi dalle "
 "variabili corrispondenti sotto <literal>APT::FTPArchive::Release</literal>, "
@@ -8934,11 +9025,17 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
 #: apt-ftparchive.1.xml
+#, fuzzy
+#| msgid ""
+#| "Sets the default compression schemes to use for the package index files. "
+#| "It is a string that contains a space separated list of at least one of: "
+#| "'.' (no compression), 'gzip' and 'bzip2'. The default for all compression "
+#| "schemes is '. gzip'."
 msgid ""
 "Sets the default compression schemes to use for the package index files. It "
-"is a string that contains a space separated list of at least one of: '.' (no "
-"compression), 'gzip' and 'bzip2'. The default for all compression schemes is "
-"'. gzip'."
+"is a string that contains a space separated list of at least one of the "
+"compressors configured via the <option>APT::Compressor</option> "
+"configuration scope.  The default for all compression schemes is '. gzip'."
 msgstr ""
 "Imposta gli schemi di compressione predefiniti da usare per i file indice "
 "dei pacchetti. È una stringa che contiene una lista separata da spazi con "
-- 
cgit v1.2.3