From 01f2b54d3606637101a95585994fb6f1e88dab66 Mon Sep 17 00:00:00 2001 From: "bubulle@debian.org" <> Date: Sat, 26 Sep 2009 14:03:57 +0200 Subject: Update files --- doc/po/apt-doc.pot | 32 ++++++++++++++++---------------- doc/po/fr.po | 54 +++++++++++++++++++++++++++++++++++++----------------- doc/po/ja.po | 54 +++++++++++++++++++++++++++++++++++++----------------- 3 files changed, 90 insertions(+), 50 deletions(-) (limited to 'doc') diff --git a/doc/po/apt-doc.pot b/doc/po/apt-doc.pot index ddd9d025e..aeb624948 100644 --- a/doc/po/apt-doc.pot +++ b/doc/po/apt-doc.pot @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2009-09-24 15:02+0300\n" +"POT-Creation-Date: 2009-09-26 11:35+0300\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -1836,8 +1836,8 @@ msgid "" "apt-ftparchive " " " " " -" " +" " " packagespathoverridepathprefix " @@ -4298,9 +4298,9 @@ msgstr "" msgid "" "The #clear command is the only way to delete a list or a complete scope. " "Reopening a scope or the ::-style described below will " -"not override previewsly written entries. Only options " -"can be overridden by adressing a new value to it - lists and scopes can't be " -"overridden, only cleared." +"not override previously written entries. Only options " +"can be overridden by addressing a new value to it - lists and scopes can't " +"be overridden, only cleared." msgstr "" #. type: Content of: @@ -4311,7 +4311,7 @@ msgid "" "full option name (APT::Get::Assume-Yes for instance) " "followed by an equals sign then the new value of the option. Lists can be " "appended too by adding a trailing :: to the list name. (As you might " -"suspect: The scope syntax can't be used on the commandline.)" +"suspect: The scope syntax can't be used on the command line.)" msgstr "" #. type: Content of: @@ -4598,7 +4598,7 @@ msgid "" "The used bandwidth can be limited with " "Acquire::http::Dl-Limit which accepts integer values in " "kilobyte. The default value is 0 which deactivates the limit and tries uses " -"as much as possible of the bandwith (Note that this option implicit " +"as much as possible of the bandwidth (Note that this option implicit " "deactivates the download from multiple servers at the same time.)" msgstr "" @@ -4797,7 +4797,7 @@ msgid "" "checked: If this setting exists the method will only be used if this file " "exists, e.g. for the bzip2 method (the inbuilt) setting is Note also that list entries specified on " -"the commandline will be added at the end of the list specified in the " +"the command line will be added at the end of the list specified in the " "configuration files, but before the default entries. To prefer a type in " "this case over the ones specified in in the configuration files you can set " "the option direct - not in list style. This will not override the defined " @@ -5057,7 +5057,7 @@ msgid "" "in between his own run. Activating these options can therefore decrease the " "time needed to perform the install / upgrade. Note that it is intended to " "activate these options per default in the future, but as it changes the way " -"APT calling dpkg drastical it needs a lot more testing. These " +"APT calling dpkg drastically it needs a lot more testing. These " "options are therefore currently experimental and should not be used in " "productive environments. Also it breaks the progress reporting so " "all frontends will currently stay around half (or more) of the time in the " @@ -5077,7 +5077,7 @@ msgstr "" #. type: Content of: #: apt.conf.5.xml:506 msgid "" -"Note that it is not garanteed that APT will support these options or that " +"Note that it is not guaranteed that APT will support these options or that " "these options will not cause (big) trouble in the future. If you have " "understand the current risks and problems with these options, but are brave " "enough to help testing them create a new configuration file and test a " @@ -5170,7 +5170,7 @@ msgid "" "As the configuration can be deferred to be done at the end by dpkg it can be " "tried to order the unpack series only by critical needs, e.g. by " "Pre-Depends. Default is true and therefore the \"old\" method of ordering in " -"verious steps by everything. While both method were present in earlier APT " +"various steps by everything. While both method were present in earlier APT " "versions the OrderCritical method was unused, so this " "method is very experimental and needs further improvements before becoming " "really useful." @@ -5201,10 +5201,10 @@ msgid "" "upgrade process as these these configure calls require currently also " "DPkg::TriggersPending which will run quite a few triggers " "(which maybe not needed). Essentials get per default a high score but the " -"immediate flag is relativly low (a package which has a Pre-Depends is higher " -"rated). These option and the others in the same group can be used to change " -"the scoring. The following example shows the settings with there default " -"values. " +"immediate flag is relatively low (a package which has a Pre-Depends is " +"higher rated). These option and the others in the same group can be used to " +"change the scoring. The following example shows the settings with there " +"default values. " msgstr "" #. type: Content of: diff --git a/doc/po/fr.po b/doc/po/fr.po index 461638080..541fd369f 100644 --- a/doc/po/fr.po +++ b/doc/po/fr.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" -"POT-Creation-Date: 2009-09-24 15:02+0300\n" +"POT-Creation-Date: 2009-09-26 11:35+0300\n" "PO-Revision-Date: 2009-09-14 20:15+0200\n" "Last-Translator: Christian Perrier <bubulle@debian.org>\n" "Language-Team: French <debian-l10n-french@lists.debian.org>\n" @@ -2424,14 +2424,34 @@ msgstr "Outil de création de fichiers d'index" #. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> #: apt-ftparchive.1.xml:36 +#, fuzzy +#| msgid "" +#| "<command>apt-ftparchive</command> <arg><option>-hvdsq</option></arg> " +#| "<arg><option>--md5</option></arg> <arg><option>--delink</option></arg> " +#| "<arg><option>--readonly</option></arg> <arg><option>--contents</option></" +#| "arg> <arg><option>-o=<replaceable>config string</replaceable></option></" +#| "arg> <arg><option>-c=<replaceable>file</replaceable></option></arg> " +#| "<group choice=\"req\"> <arg>packages<arg choice=\"plain\" rep=\"repeat" +#| "\"><replaceable>path</replaceable></arg><arg><replaceable>override</" +#| "replaceable><arg><replaceable>pathprefix</replaceable></arg></arg></arg> " +#| "<arg>sources<arg choice=\"plain\" rep=\"repeat\"><replaceable>path</" +#| "replaceable></arg><arg><replaceable>override</" +#| "replaceable><arg><replaceable>pathprefix</replaceable></arg></arg></arg> " +#| "<arg>contents <arg choice=\"plain\"><replaceable>path</replaceable></" +#| "arg></arg> <arg>release <arg choice=\"plain\"><replaceable>path</" +#| "replaceable></arg></arg> <arg>generate <arg choice=\"plain" +#| "\"><replaceable>config-file</replaceable></arg> <arg choice=\"plain\" rep=" +#| "\"repeat\"><replaceable>section</replaceable></arg></arg> <arg>clean <arg " +#| "choice=\"plain\"><replaceable>config-file</replaceable></arg></arg> </" +#| "group>" msgid "" "<command>apt-ftparchive</command> <arg><option>-hvdsq</option></arg> " "<arg><option>--md5</option></arg> <arg><option>--delink</option></arg> " "<arg><option>--readonly</option></arg> <arg><option>--contents</option></" -"arg> <arg><option>-o=<replaceable>config string</replaceable></option></arg> " -"<arg><option>-c=<replaceable>file</replaceable></option></arg> <group choice=" -"\"req\"> <arg>packages<arg choice=\"plain\" rep=\"repeat" -"\"><replaceable>path</replaceable></arg><arg><replaceable>override</" +"arg> <arg><option>-o <replaceable>config</replaceable>=<replaceable>string</" +"replaceable></option></arg> <arg><option>-c=<replaceable>file</replaceable></" +"option></arg> <group choice=\"req\"> <arg>packages<arg choice=\"plain\" rep=" +"\"repeat\"><replaceable>path</replaceable></arg><arg><replaceable>override</" "replaceable><arg><replaceable>pathprefix</replaceable></arg></arg></arg> " "<arg>sources<arg choice=\"plain\" rep=\"repeat\"><replaceable>path</" "replaceable></arg><arg><replaceable>override</" @@ -5721,8 +5741,8 @@ msgstr "" msgid "" "The #clear command is the only way to delete a list or a complete scope. " "Reopening a scope or the ::-style described below will <emphasis>not</" -"emphasis> override previewsly written entries. Only options can be " -"overridden by adressing a new value to it - lists and scopes can't be " +"emphasis> override previously written entries. Only options can be " +"overridden by addressing a new value to it - lists and scopes can't be " "overridden, only cleared." msgstr "" @@ -5741,7 +5761,7 @@ msgid "" "full option name (<literal>APT::Get::Assume-Yes</literal> for instance) " "followed by an equals sign then the new value of the option. Lists can be " "appended too by adding a trailing :: to the list name. (As you might " -"suspect: The scope syntax can't be used on the commandline.)" +"suspect: The scope syntax can't be used on the command line.)" msgstr "" "Tous les outils d'APT possèdent une option <option>-o</option> qui permet de " "spécifier une configuration quelconque depuis la ligne de commande. La " @@ -6129,7 +6149,7 @@ msgid "" "The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</" "literal> which accepts integer values in kilobyte. The default value is 0 " "which deactivates the limit and tries uses as much as possible of the " -"bandwith (Note that this option implicit deactivates the download from " +"bandwidth (Note that this option implicit deactivates the download from " "multiple servers at the same time.)" msgstr "" @@ -6396,7 +6416,7 @@ msgid "" "replaceable></literal> will be checked: If this setting exists the method " "will only be used if this file exists, e.g. for the bzip2 method (the " "inbuilt) setting is <placeholder type=\"literallayout\" id=\"0\"/> Note also " -"that list entries specified on the commandline will be added at the end of " +"that list entries specified on the command line will be added at the end of " "the list specified in the configuration files, but before the default " "entries. To prefer a type in this case over the ones specified in in the " "configuration files you can set the option direct - not in list style. This " @@ -6749,7 +6769,7 @@ msgid "" "in between his own run. Activating these options can therefore decrease the " "time needed to perform the install / upgrade. Note that it is intended to " "activate these options per default in the future, but as it changes the way " -"APT calling dpkg drastical it needs a lot more testing. <emphasis>These " +"APT calling dpkg drastically it needs a lot more testing. <emphasis>These " "options are therefore currently experimental and should not be used in " "productive environments.</emphasis> Also it breaks the progress reporting so " "all frontends will currently stay around half (or more) of the time in the " @@ -6769,7 +6789,7 @@ msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> #: apt.conf.5.xml:506 msgid "" -"Note that it is not garanteed that APT will support these options or that " +"Note that it is not guaranteed that APT will support these options or that " "these options will not cause (big) trouble in the future. If you have " "understand the current risks and problems with these options, but are brave " "enough to help testing them create a new configuration file and test a " @@ -6862,7 +6882,7 @@ msgid "" "As the configuration can be deferred to be done at the end by dpkg it can be " "tried to order the unpack series only by critical needs, e.g. by Pre-" "Depends. Default is true and therefore the \"old\" method of ordering in " -"verious steps by everything. While both method were present in earlier APT " +"various steps by everything. While both method were present in earlier APT " "versions the <literal>OrderCritical</literal> method was unused, so this " "method is very experimental and needs further improvements before becoming " "really useful." @@ -6893,10 +6913,10 @@ msgid "" "upgrade process as these these configure calls require currently also " "<literal>DPkg::TriggersPending</literal> which will run quite a few triggers " "(which maybe not needed). Essentials get per default a high score but the " -"immediate flag is relativly low (a package which has a Pre-Depends is higher " -"rated). These option and the others in the same group can be used to change " -"the scoring. The following example shows the settings with there default " -"values. <placeholder type=\"literallayout\" id=\"0\"/>" +"immediate flag is relatively low (a package which has a Pre-Depends is " +"higher rated). These option and the others in the same group can be used to " +"change the scoring. The following example shows the settings with there " +"default values. <placeholder type=\"literallayout\" id=\"0\"/>" msgstr "" #. type: Content of: <refentry><refsect1><title> diff --git a/doc/po/ja.po b/doc/po/ja.po index fc1fec09e..ca5ccef2b 100644 --- a/doc/po/ja.po +++ b/doc/po/ja.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2009-09-24 15:02+0300\n" +"POT-Creation-Date: 2009-09-26 11:35+0300\n" "PO-Revision-Date: 2009-07-30 22:55+0900\n" "Last-Translator: KURASAWA Nozomu <nabetaro@caldron.jp>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -2501,14 +2501,34 @@ msgstr "インデックスファイル生成ユーティリティ" # type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> #. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> #: apt-ftparchive.1.xml:36 +#, fuzzy +#| msgid "" +#| "<command>apt-ftparchive</command> <arg><option>-hvdsq</option></arg> " +#| "<arg><option>--md5</option></arg> <arg><option>--delink</option></arg> " +#| "<arg><option>--readonly</option></arg> <arg><option>--contents</option></" +#| "arg> <arg><option>-o=<replaceable>config string</replaceable></option></" +#| "arg> <arg><option>-c=<replaceable>file</replaceable></option></arg> " +#| "<group choice=\"req\"> <arg>packages<arg choice=\"plain\" rep=\"repeat" +#| "\"><replaceable>path</replaceable></arg><arg><replaceable>override</" +#| "replaceable><arg><replaceable>pathprefix</replaceable></arg></arg></arg> " +#| "<arg>sources<arg choice=\"plain\" rep=\"repeat\"><replaceable>path</" +#| "replaceable></arg><arg><replaceable>override</" +#| "replaceable><arg><replaceable>pathprefix</replaceable></arg></arg></arg> " +#| "<arg>contents <arg choice=\"plain\"><replaceable>path</replaceable></" +#| "arg></arg> <arg>release <arg choice=\"plain\"><replaceable>path</" +#| "replaceable></arg></arg> <arg>generate <arg choice=\"plain" +#| "\"><replaceable>config-file</replaceable></arg> <arg choice=\"plain\" rep=" +#| "\"repeat\"><replaceable>section</replaceable></arg></arg> <arg>clean <arg " +#| "choice=\"plain\"><replaceable>config-file</replaceable></arg></arg> </" +#| "group>" msgid "" "<command>apt-ftparchive</command> <arg><option>-hvdsq</option></arg> " "<arg><option>--md5</option></arg> <arg><option>--delink</option></arg> " "<arg><option>--readonly</option></arg> <arg><option>--contents</option></" -"arg> <arg><option>-o=<replaceable>config string</replaceable></option></arg> " -"<arg><option>-c=<replaceable>file</replaceable></option></arg> <group choice=" -"\"req\"> <arg>packages<arg choice=\"plain\" rep=\"repeat" -"\"><replaceable>path</replaceable></arg><arg><replaceable>override</" +"arg> <arg><option>-o <replaceable>config</replaceable>=<replaceable>string</" +"replaceable></option></arg> <arg><option>-c=<replaceable>file</replaceable></" +"option></arg> <group choice=\"req\"> <arg>packages<arg choice=\"plain\" rep=" +"\"repeat\"><replaceable>path</replaceable></arg><arg><replaceable>override</" "replaceable><arg><replaceable>pathprefix</replaceable></arg></arg></arg> " "<arg>sources<arg choice=\"plain\" rep=\"repeat\"><replaceable>path</" "replaceable></arg><arg><replaceable>override</" @@ -5904,8 +5924,8 @@ msgstr "" msgid "" "The #clear command is the only way to delete a list or a complete scope. " "Reopening a scope or the ::-style described below will <emphasis>not</" -"emphasis> override previewsly written entries. Only options can be " -"overridden by adressing a new value to it - lists and scopes can't be " +"emphasis> override previously written entries. Only options can be " +"overridden by addressing a new value to it - lists and scopes can't be " "overridden, only cleared." msgstr "" @@ -5925,7 +5945,7 @@ msgid "" "full option name (<literal>APT::Get::Assume-Yes</literal> for instance) " "followed by an equals sign then the new value of the option. Lists can be " "appended too by adding a trailing :: to the list name. (As you might " -"suspect: The scope syntax can't be used on the commandline.)" +"suspect: The scope syntax can't be used on the command line.)" msgstr "" "すべての APT ツールで、コマンドラインで任意の設定を行う -o オプションが使用で" "きます。文法は、完全なオプション名 (例: <literal>APT::Get::Assume-Yes</" @@ -6323,7 +6343,7 @@ msgid "" "The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</" "literal> which accepts integer values in kilobyte. The default value is 0 " "which deactivates the limit and tries uses as much as possible of the " -"bandwith (Note that this option implicit deactivates the download from " +"bandwidth (Note that this option implicit deactivates the download from " "multiple servers at the same time.)" msgstr "" @@ -6577,7 +6597,7 @@ msgid "" "replaceable></literal> will be checked: If this setting exists the method " "will only be used if this file exists, e.g. for the bzip2 method (the " "inbuilt) setting is <placeholder type=\"literallayout\" id=\"0\"/> Note also " -"that list entries specified on the commandline will be added at the end of " +"that list entries specified on the command line will be added at the end of " "the list specified in the configuration files, but before the default " "entries. To prefer a type in this case over the ones specified in in the " "configuration files you can set the option direct - not in list style. This " @@ -6941,7 +6961,7 @@ msgid "" "in between his own run. Activating these options can therefore decrease the " "time needed to perform the install / upgrade. Note that it is intended to " "activate these options per default in the future, but as it changes the way " -"APT calling dpkg drastical it needs a lot more testing. <emphasis>These " +"APT calling dpkg drastically it needs a lot more testing. <emphasis>These " "options are therefore currently experimental and should not be used in " "productive environments.</emphasis> Also it breaks the progress reporting so " "all frontends will currently stay around half (or more) of the time in the " @@ -6961,7 +6981,7 @@ msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> #: apt.conf.5.xml:506 msgid "" -"Note that it is not garanteed that APT will support these options or that " +"Note that it is not guaranteed that APT will support these options or that " "these options will not cause (big) trouble in the future. If you have " "understand the current risks and problems with these options, but are brave " "enough to help testing them create a new configuration file and test a " @@ -7057,7 +7077,7 @@ msgid "" "As the configuration can be deferred to be done at the end by dpkg it can be " "tried to order the unpack series only by critical needs, e.g. by Pre-" "Depends. Default is true and therefore the \"old\" method of ordering in " -"verious steps by everything. While both method were present in earlier APT " +"various steps by everything. While both method were present in earlier APT " "versions the <literal>OrderCritical</literal> method was unused, so this " "method is very experimental and needs further improvements before becoming " "really useful." @@ -7088,10 +7108,10 @@ msgid "" "upgrade process as these these configure calls require currently also " "<literal>DPkg::TriggersPending</literal> which will run quite a few triggers " "(which maybe not needed). Essentials get per default a high score but the " -"immediate flag is relativly low (a package which has a Pre-Depends is higher " -"rated). These option and the others in the same group can be used to change " -"the scoring. The following example shows the settings with there default " -"values. <placeholder type=\"literallayout\" id=\"0\"/>" +"immediate flag is relatively low (a package which has a Pre-Depends is " +"higher rated). These option and the others in the same group can be used to " +"change the scoring. The following example shows the settings with there " +"default values. <placeholder type=\"literallayout\" id=\"0\"/>" msgstr "" #. type: Content of: <refentry><refsect1><title> -- cgit v1.2.3