From 0e65be59ac218d9479d429ab6cf24e072fdb819b Mon Sep 17 00:00:00 2001 From: David Kalnischkies Date: Wed, 30 Sep 2009 19:15:38 +0200 Subject: move the it translation of the guide to its own subdirectory for consitents and sake of the universe reasons --- doc/guide.it.sgml | 585 --------------------------------------------------- doc/it/guide.it.sgml | 585 +++++++++++++++++++++++++++++++++++++++++++++++++++ doc/it/makefile | 11 + doc/makefile | 2 +- 4 files changed, 597 insertions(+), 586 deletions(-) delete mode 100644 doc/guide.it.sgml create mode 100644 doc/it/guide.it.sgml create mode 100644 doc/it/makefile (limited to 'doc') diff --git a/doc/guide.it.sgml b/doc/guide.it.sgml deleted file mode 100644 index 2dc46e263..000000000 --- a/doc/guide.it.sgml +++ /dev/null @@ -1,585 +0,0 @@ - - - -Guida dell'utente di APT - -Jason Gunthorpe jgg@debian.org -Traduzione di Eugenia Franzoni eugenia@linuxcare.com - -$Id: guide.it.sgml,v 1.5 2003/04/26 23:26:13 doogie Exp $ - - -Guida per l'uso del gestore di pacchetti APT. - - - -Copyright © Jason Gunthorpe, 1998. - -

Ed. italiana Copyright © Eugenia Franzoni, 2000. - -

-"APT" e questo documento sono software libero, e li si può ridistribuire -e/o modificare secondo i termini della Licenza Pubblica Generica GNU -(GPL), pubblicata dalla Free Software Foundation, nella versione 2 o -(se preferite) qualsiasi versione successiva. - -

"APT" and this document are free software; you can redistribute them and/or -modify them under the terms of the GNU General Public License as published -by the Free Software Foundation; either version 2 of the License, or (at your -option) any later version. - -

-Per ulteriori dettagli sui sistemi GNU/Linux si veda il testo -completo della licenza nel file -/usr/share/common-licenses/GPL. - - - - - - -Descrizione generale - -

-Il pacchetto APT al momento contiene due sezioni, il metodo APT -dselect e l'interfaccia utente a linea di comando apt-get; -entrambi danno modo di installare e rimuovere pacchetti, e di scaricarne -altri da Internet. - -Anatomia del sistema di pacchettizzazione -

-Il sistema di pacchettizzazione di Debian contiene un gran numero di -informazioni associate a ciascun pacchetto, per assicurarsi che si -integri facilmente ed in maniera pulita nel sistema; la più -importante di esse è il sistema di dipendenze. - -

-Il sistema di dipendenze permette ai singoli programmi di fare uso -degli elementi condivisi del sistema, quali le librerie; per -ridurre il numero di elementi che l'utente medio debba installare, -le porzioni di programmi che non vengono usate spesso vengono poste -in pacchetti separati. Inoltre, è possibile avere più di una scelta per -cose quali i programmi di posta elettronica, i server X e così via. - -

-Il primo passo per capire il sistema di dipendenze è la -comprensione del concetto di dipendenza semplice: un pacchetto richiede -che un altro sia installato insieme ad esso per poter -funzionare. - - -

-Ad esempio, mail-crypt è un'estensione di emacs che aiuta a criptare le -mail con PGP. Se PGP non è installato, mail-crypt è inutile, quindi -mail-crypt ha una dipendenza semplice da PGP. Inoltre, dato che si tratta -di un'estensione di emacs, mail-crypt dipende anche da emacs, senza il -quale è totalmente inutile. - -

-L'altro tipo di dipendenza importante da capire è la dipendenza di -conflitto; con questa, un pacchetto che venga installato insieme ad un -altro pacchetto non funziona, e si hanno seri problemi al sistema. -Come esempio, si consideri un programma di trasporto della posta, -quale sendmail, exim o qmail: non è possibile averne due contemporaneamente, -perché entrambi hanno bisogno di restare in ascolto sulla stessa porta di rete -per ricevere la posta. Tentare di installarne due danneggerebbe seriamente il -sistema, quindi ciascun programma di trasporto della posta ha una -dipendenza di conflitto con tutti gli altri. - -

-Come ulteriore complicazione, c'è la possibilità che un pacchetto -voglia prendere il posto di un altro; ad esempio, exim e sendmail per molte -cose sono identici, dato che entrambi gestiscono la posta e comprendono -un'interfaccia comune, quindi il sistema di pacchettizzazione deve dichiarare -che sono entrambi agenti di trasporto della posta, e che gli altri -pacchetti a cui serve uno dei due devono dipendere da un pacchetto -fittizio agente-di-trasporto-della-posta. Quando si modificano -a mano i pacchetti, questo può portare a moltissima confusione. - -

-In ciascun momento una singola dipendenza può essere soddisfatta o meno -dai pacchetti già installati; APT cerca di risolvere i problemi -di dipendenze con un buon numero di algoritmi automatici, che aiutano -a selezionare i pacchetti da installare. - - - - - - -apt-get - -

-apt-get fornisce un modo semplice di installare i pacchetti dalla -linea di comando. Diversamente da dpkg, apt-get non -capisce i nomi dei file .deb, ma utilizza il vero nome dei pacchetti, -e può installare archivi .deb solo da una fonte. - -

-La prima Se state usando un proxy server http, dovete prima ancora -impostare la variabile d'ambiente http_proxy; vedere -sources.list(5). -cosa da fare prima di usare apt-get è impostare l'elenco dei -pacchetti dalle fonti in modo che il programma sappia quali pacchetti -sono disponibili. Lo si fa con apt-get update. Ad esempio, - -

- -# apt-get update -Get http://ftp.de.debian.org/debian-non-US/ stable/binary-i386/ Packages -Get http://llug.sep.bnl.gov/debian/ testing/contrib Packages -Reading Package Lists... Done -Building Dependency Tree... Done - - -

-Dopo aver aggiornato l'elenco si possono usare molti comandi: - -upgrade -Upgrade tenterà di fare un aggiornamento indolore del sistema completo, -senza installare nuovi pacchetti o rimuoverne di esistenti, e senza -aggiornare un pacchetto che possa rovinarne altri. Upgrade farà un elenco -di tutti i pacchetti che non avrà potuto aggiornare, cosa che in genere -significa che questi dipendono da nuovi pacchetti o vanno in conflitto -con altri. Per forzare la loro installazione si può usare -dselect o apt-get install. - -install -Install viene usato per installare i singoli pacchetti dando il loro nome. -Il pacchetto viene automaticamente scaricato ed installato, cosa molto utile -se già se ne conosce il nome e non si vuole entrare in grafica per -selezionarlo. Al comando si possono passare anche più pacchetti, che saranno -tutti scaricati. L'installazione automatica cerca di risolvere i problemi -di dipendenze con gli altri pacchetti elencati, stampa un riassunto e -chiede conferma se si devono modificare altri pacchetti che non siano quelli -sulla linea di comando. - -dist-upgrade -Dist-upgrade fa un aggiornamento completo, progettato in modo da rendere -semplici gli aggiornamenti tra versioni di Debian. Usa un algoritmo -sofisticato per determinare il miglior insieme di pacchetti da installare, -aggiornare e rimuovere per arrivare alla versione più aggiornata -del sistema possibile. In alcune situazioni può essere vantaggioso usare -dist-upgrade invece che sprecare tempo a risolvere manualmente le -dipendenze con dselect. Una volta completato dist-upgrade, si può -usare dselect per installare eventuali pacchetti che sono stati -tralasciati. - -

-È importante controllare attentamente cosa intende fare dist-upgrade, -dato che le sue decisioni a volte possono essere abbastanza sorprendenti. - - -

-apt-get ha diverse opzioni a linea di comando, che vengono -documentate dettagliatamente nella sua pagina man, -. L'opzione più utile è --d, che non installa i file scaricati: se il sistema deve -scaricare un gran numero di pacchetti, non è bene farglieli installare -subito, in caso dovesse andare male qualcosa. Dopo aver usato -d, -gli archivi scaricati possono essere installati semplicemente dando di -nuovo lo stesso comando senza l'opzione -d. - - - - - -DSelect -

-Il metodo APT di dselect fornisce tutte le funzionalità di APT -all'interno dell'interfaccia grafica di selezione dei pacchetti -dselect. dselect viene usato per selezionare i pacchetti -da installare o rimuovere, ed APT li installa. - -

-Per abilitare il metodo APT dovete selezionare [A]ccess in dselect -e scegliere il metodo APT; vi verrà chiesto un insieme di fonti -(Sources), cioè di posti da cui scaricare gli archivi. -Tali fonti possono essere siti Internet remoti, mirror locali di Debian -o CDROM; ciascuna di esse può fornire una parte dell'archivio Debian, -ed APT le combinerà insieme in un set completo di pacchetti. Se avete un -CDROM è una buona idea indicare quello per primo, e poi i mirror, in modo -da avere accesso alle ultime versioni; APT userà in questo modo automaticamente -i pacchetti sul CDROM prima di scaricarli da Internet. - -

- - Set up a list of distribution source locations - - Please give the base URL of the debian distribution. - The access schemes I know about are: http file - - For example: - file:/mnt/debian, - ftp://ftp.debian.org/debian, - http://ftp.de.debian.org/debian, - - - URL [http://llug.sep.bnl.gov/debian]: - - -

-La configurazione delle fonti inizia chiedendo la base dell'archivio Debian, -propone come default un mirror HTTP, e poi chiede la distribuzione -da scaricare. - -

- - Please give the distribution tag to get or a path to the - package file ending in a /. The distribution - tags are typically something like: stable unstable testing non-US - - Distribution [stable]: - - -

-La distribuzione (``distribution'') fa riferimento alla versione Debian -dell'archivio: stable è l'ultima rilasciata, ed unstable -è quella di sviluppo. non-US è disponibile solo su alcuni mirror, -e contiene dei pacchetti in cui viene usata della tecnologia di criptazione -o altre cose che non possano essere esportate dagli Stati Uniti; importare -questi pacchetti negli US è però legale. - -

- - Please give the components to get - The components are typically something like: main contrib non-free - - Components [main contrib non-free]: - - -

-L'elenco dei componenti (``components'') si riferisce alla lista di -sotto-distribuzioni da scaricare. Ciascuna distribuzione viene divisa in -base al copyright del software: la main contiene pacchetti la cui licenza -soddisfa le DFSG, mentre contrib e non-free contengono software che ha -diverse restrizioni sull'uso e sulla distribuzione. - -

-Si possono inserire un qualsiasi numero di fonti, e lo script di -configurazione continuerà a chiedere fino a che abbiate specificato tutti gli -elementi che volete. - -

-Prima di cominciare ad usare dselect è necessario aggiornare -l'elenco dei pacchetti disponibili selezionando [U]pdate dal menù: -si tratta di un sovrainsieme di ciò che fa apt-get update, -che rende l'informazione scaricata disponibile a -dselect. [U]pdate deve essere fatto anche se prima è stato dato -apt-get update. - -

-Si può a questo punto continuare selezionando i pacchetti desiderati -usando [S]elect e poi installando con [I]nstall. Se si usa il metodo APT, -i comandi [C]onfig e [R]emove non hanno significato, dato che entrambe le -fasi sono contenute in [I]nstall. - -

-Per default APT rimuoverà automaticamente i pacchetti che sono stati installati -con successo. Per modificare questo comportamento, si inserisca -Dselect::clean "prompt"; in /etc/apt/apt.conf. - - - - - -L'interfaccia - -

-Entrambi i metodi, dselect APT ed apt-get, condividono la -stessa interfaccia; si tratta di un sistema semplice che indica in genere -cosa sta per fare, e poi lo fa. - -Il metodo dselect è in realtà un insieme di script di wrapper ad -apt-get. Il metodo fornisce delle funzionalità maggiori del -solo apt-get. - -Dopo la stampa di un riassunto delle operazioni che saranno fatte, -APT stampa dei messaggi informativi sullo stato del sistema, in modo che -possiate avere davanti agli occhi a quale punto dell'operazione si trova, -e quanto ancora si deve aspettare. - - -Avvio - -

-Prima di ciascuna operazione, eccetto l'aggiornamento della lista, APT -compie alcune operazioni per prepararsi, oltre a dei controlli dello -stato del sistema. In qualsiasi momento le stesse operazioni possono essere -fatte con apt-get check -

- -# apt-get check -Reading Package Lists... Done -Building Dependancy Tree... Done - - -

-La prima cosa che fa è leggere tutti i file dei pacchetti in memoria, -usando uno schema di caching in modo da rendere la stessa operazione più -veloce la seconda volta che la si fa. Se alcuni dei file dei pacchetti -non vengono trovati, sono ignorati e viene stampato un avvertimento -all'uscita di apt-get. - -

-L'operazione finale consiste in un'analisi dettagliata delle -dipendenze del sistema: viene controllato che tutte le dipendenze dei -singoli pacchetti installati o non scompattati siano soddisfatte. -Se vengono individuati dei problemi, viene stampato un resoconto, -ed apt-get esce senza eseguire alcuna operazione. - -

- -# apt-get check -Reading Package Lists... Done -Building Dependancy Tree... Done -You might want to run apt-get -f install' to correct these. -Sorry, but the following packages have unmet dependencies: - 9fonts: Depends: xlib6g but it is not installed - uucp: Depends: mailx but it is not installed - blast: Depends: xlib6g (>= 3.3-5) but it is not installed - adduser: Depends: perl-base but it is not installed - aumix: Depends: libgpmg1 but it is not installed - debiandoc-sgml: Depends: sgml-base but it is not installed - bash-builtins: Depends: bash (>= 2.01) but 2.0-3 is installed - cthugha: Depends: svgalibg1 but it is not installed - Depends: xlib6g (>= 3.3-5) but it is not installed - libreadlineg2: Conflicts:libreadline2 (<< 2.1-2.1) - - -

-In questo esempio il sistema ha molti problemi, tra cui uno piuttosto serio -con la libreadlineg2. Per ciascun pacchetto che ha dipendenze non soddisfatte, -viene stampata una linea che indica il pacchetto che crea il problema e -quali problemi ci sono. Viene inclusa inoltre una breve spiegazione -del perché il pacchetto ha un problema di dipendenze. - -

-Ci sono due modi in cui un sistema possa arrivare in uno stato problematico -di questo genere: il primo è causato dal fatto che dpkg possa -mancare alcune relazioni sottili tra pacchetti durante un aggiornamento -del sistemaAPT considera comunque tutte le dipendenze note, -e cerca di prevenire problemi ai pacchetti; il secondo è possibile -se l'installazione di un pacchetto fallisce, ed in questo caso è possibile -che un pacchetto venga scompattato senza che tutti quelli da cui dipende -siano stati installati. - -

-La seconda possibilità è meno seria della prima, dato che APT gestisce -l'ordine di installazione dei pacchetti; in entrambi i casi l'opzione --f di apt-get gli farà trovare una soluzione e lo farà -continuare. Il metodo APT di dselect comprende sempre l'opzione --f per permettere di configurare facilmente anche i pacchetti con -script errati. - -

-Se viene usata però l'opzione -f per correggere un sistema in uno -stato molto problematico, è possibile che anche con l'opzione il programma -fallisca, subito o durante la sequenza di installazione. In entrambi i casi -è necessario usare dpkg a mano (probabilmente usando delle opzioni -di forzatura) per correggere quanto basta per poter fare continuare APT. - - - -Il resoconto sullo stato - -

-Prima di procedere, apt-get presenterà un resoconto delle operazioni -che sta per fare. In genere tale resoconto varierà con il tipo di operazioni -da fare, ma ci sono alcuni elementi comuni: in tutti i casi gli elenchi -dipendono dallo stato finale delle cose, e tengono conto dell'opzione --f e di altre attività rilevanti per il comando da eseguire. - -L'elenco dei pacchetti Extra -

- -The following extra packages will be installed: - libdbd-mysql-perl xlib6 zlib1 xzx libreadline2 libdbd-msql-perl - mailpgp xdpkg fileutils pinepgp zlib1g xlib6g perl-base - bin86 libgdbm1 libgdbmg1 quake-lib gmp2 bcc xbuffy - squake pgp-i python-base debmake ldso perl libreadlineg2 - ssh - - -

-L'elenco dei pacchetti Extra mostra tutti i pacchetti che verranno installati -o aggiornati oltre a quelli indicati sulla linea di comando. Viene generato -solo per il comando install. I pacchetti elencati sono spesso il -risultato di un'operazione di auto installazione (Auto Install). - - -I pacchetti da rimuovere -

- -The following packages will be REMOVED: - xlib6-dev xpat2 tk40-dev xkeycaps xbattle xonix - xdaliclock tk40 tk41 xforms0.86 ghostview xloadimage xcolorsel - xadmin xboard perl-debug tkined xtetris libreadline2-dev perl-suid - nas xpilot xfig - - -

-L'elenco dei pacchetti da rimuovere (Remove) indica tutti i pacchetti che -verranno rimossi dal sistema. Può essere mostrato per una qualsiasi delle -operazioni, e deve sempre essere esaminato attentamente per assicurarsi -che non venga eliminato qualcosa di importante. Con l'opzione -f -è particolarmente probabile che vengano eliminati dei pacchetti, ed in questo -caso va fatta estrema attenzione. La lista può contenere dei pacchetti -che verranno rimossi perché sono già rimossi parzialmente, forse a causa -di un'installazione non terminata correttamente. - - -L'elenco dei nuovi pacchetti installati -

- -The following NEW packages will installed: - zlib1g xlib6g perl-base libgdbmg1 quake-lib gmp2 pgp-i python-base - - -

-L'elenco dei nuovi pacchetti installati (New) è semplicemente un appunto -su quello che accadrà. I pacchetti nell'elenco non sono al momento installati -nel sistema, ma lo saranno alla fine delle operazioni di APT. - - -L'elenco dei pacchetti trattenuti -

- -The following packages have been kept back - compface man-db tetex-base msql libpaper svgalib1 - gs snmp arena lynx xpat2 groff xscreensaver - - -

-In ogni caso in cui il sistema viene aggiornato nel suo insieme, c'è la -possibilità che non possano venire installate nuove versioni di alcuni -pacchetti, dato che potrebbero richiedere l'installazione di pacchetti non -presenti nel sistema, o entrare in conflitto con altri già presenti. -In questo caso, il pacchetto viene elencato nella lista di quelli -trattenuti (Kept Back). Il miglior modo per convincere i pacchetti -elencati in questa lista è di installarli con apt-get install o -usare dselect per risolvere i problemi. - - -Messaggi di attenzione sui pacchetti trattenuti -

- -The following held packages will be changed: - cvs - - -

-A volte si può richiedere ad APT di installare un pacchetto -che è stato trattenuto; in questi casi viene stampato un messaggio di -attenzione, che avverte che il pacchetto verrà modificato. Questo -dovrebbe accadere solo durante operazioni di dist-upgrade o di install. - - -Resoconto finale -

-Infine, APT stamperà un riassunto di tutte le modifiche che accadranno. - -

- -206 packages upgraded, 8 newly installed, 23 to remove and 51 not upgraded. -12 packages not fully installed or removed. -Need to get 65.7M/66.7M of archives. After unpacking 26.5M will be used. - - -

-La prima linea del riassunto è semplicemente una versione ridotta di tutte -le liste, ed include il numero di aggiornamenti -- cioè dei pacchetti -già installati per cui sono disponibili nuove versioni. La seconda -linea indica il numero di pacchetti con problemi di configurazione, -probabilmente in conseguenza di un'installazione non andata a buon fine. -La linea finale indica i requisiti di spazio dell'installazione: i primi -due numeri indicano rispettivamente il numero di byte che devono -essere trasferiti da posizioni remote, ed il secondo la dimensione totale -di tutti gli archivi necessari per l'installazione. Il numero successivo -indica la differenza in dimensione tra i pacchetti già installati -e quelli che lo saranno, ed è approssimativamente equivalente allo spazio -richiesto in /usr dopo l'installazione. Se si stanno rimuovendo dei -pacchetti, il valore può indicare lo spazio che verrà liberato. - -

-Si possono generare altri resoconti usando l'opzione -u per mostrare -i pacchetti da aggiornare, ma sono simili all'esempio precedente. - - - -La visualizzazione dello stato -

-Durante il download degli archivi e dei file dei pacchetti, APT -stampa una serie di messaggi di stato. - -

- -# apt-get update -Get:1 http://ftp.de.debian.org/debian-non-US/ stable/non-US/ Packages -Get:2 http://llug.sep.bnl.gov/debian/ testing/contrib Packages -Hit http://llug.sep.bnl.gov/debian/ testing/main Packages -Get:4 http://ftp.de.debian.org/debian-non-US/ unstable/binary-i386/ Packages -Get:5 http://llug.sep.bnl.gov/debian/ testing/non-free Packages -11% [5 testing/non-free `Waiting for file' 0/32.1k 0%] 2203b/s 1m52s - - -

-Le linee che cominciano con Get vengono stampate quando APT inizia -a scaricare un file, e l'ultima linea indica il progresso dell'operazione. -Il primo valore in percentuale indica la percentuale totale di tutti i file; -dato che la dimensione dei file Package non è nota, purtroppo a volte -apt-get update fa una stima poco accurata. - -

-La sezione successiva della linea di stato viene ripetuta una volta per -ciascuna fase del download, ed indica l'operazione in corso, insieme -ad alcune informazioni utili su cosa stia accadendo. A volte questa -sezione contiene solamente Forking, che significa che il sistema -operativo sta caricando il modulo. La prima parola dopo la parentesi quadra -aperta è il nome breve dell'oggetto che si sta scaricando, che per gli archivi -è il nome del pacchetto. - -

-All'interno delle virgolette c'è una stringa informativa, che indica il -progresso della fase di negoziazione del download. Tipicamente comincia con -Connecting, procede con Waiting for file e poi con -Downloading o Resuming. Il valore finale è il numero di byte -che sono stati scaricati dal sito remoto: una volta cominciato il -download viene rappresentato come 102/10.2k, che indica che -sono stati scaricati 102 byte di 10.2 kilobyte. La dimensione totale -viene sempre espressa in notazione a quattro cifre, per risparmiare -spazio. Dopo la dimensione viene indicato un indicatore -progressivo della percentuale del file. Il penultimo elemento è la velocità -istantanea media, che viene aggiornata ogni 5 secondi, e riflette la -velocità di trasferimento dei dati in quel periodo. Infine, viene -visualizzato il tempo stimato per il trasferimento, che viene aggiornato -periodicamente e riflette il tempo necessario per completare tutte le -operazioni alla velocità di trasferimento mostrata. - -

-La visualizzazione dello stato viene aggiornata ogni mezzo secondo per -fornire un feedback costante del processo di download, e le linee Get -scorrono indietro quando viene cominciato il download di un nuovo file. -Dato che la visualizzazione dello stato viene costantemente -aggiornata, non è adatta per essere registrata in un file; per non -visualizzarla si può usare l'opzione -q. - - - -Dpkg - -

-APT usa dpkg per installare gli archivi e passerà all'interfaccia -dpkg una volta finito il download. -dpkg porrà anche alcune domande durante la manipolazione dei -pacchetti, ed i pacchetti stessi -potranno farne altre. Prima di ciascuna domanda viene -proposta una descrizione di quello che sta per chiedere, e le domande -sono troppo diverse per poter essere discusse in maniera completa in questa -occasione. - - - - - - diff --git a/doc/it/guide.it.sgml b/doc/it/guide.it.sgml new file mode 100644 index 000000000..2dc46e263 --- /dev/null +++ b/doc/it/guide.it.sgml @@ -0,0 +1,585 @@ + + + +Guida dell'utente di APT + +Jason Gunthorpe jgg@debian.org +Traduzione di Eugenia Franzoni eugenia@linuxcare.com + +$Id: guide.it.sgml,v 1.5 2003/04/26 23:26:13 doogie Exp $ + + +Guida per l'uso del gestore di pacchetti APT. + + + +Copyright © Jason Gunthorpe, 1998. + +

Ed. italiana Copyright © Eugenia Franzoni, 2000. + +

+"APT" e questo documento sono software libero, e li si può ridistribuire +e/o modificare secondo i termini della Licenza Pubblica Generica GNU +(GPL), pubblicata dalla Free Software Foundation, nella versione 2 o +(se preferite) qualsiasi versione successiva. + +

"APT" and this document are free software; you can redistribute them and/or +modify them under the terms of the GNU General Public License as published +by the Free Software Foundation; either version 2 of the License, or (at your +option) any later version. + +

+Per ulteriori dettagli sui sistemi GNU/Linux si veda il testo +completo della licenza nel file +/usr/share/common-licenses/GPL. + + + + + + +Descrizione generale + +

+Il pacchetto APT al momento contiene due sezioni, il metodo APT +dselect e l'interfaccia utente a linea di comando apt-get; +entrambi danno modo di installare e rimuovere pacchetti, e di scaricarne +altri da Internet. + +Anatomia del sistema di pacchettizzazione +

+Il sistema di pacchettizzazione di Debian contiene un gran numero di +informazioni associate a ciascun pacchetto, per assicurarsi che si +integri facilmente ed in maniera pulita nel sistema; la più +importante di esse è il sistema di dipendenze. + +

+Il sistema di dipendenze permette ai singoli programmi di fare uso +degli elementi condivisi del sistema, quali le librerie; per +ridurre il numero di elementi che l'utente medio debba installare, +le porzioni di programmi che non vengono usate spesso vengono poste +in pacchetti separati. Inoltre, è possibile avere più di una scelta per +cose quali i programmi di posta elettronica, i server X e così via. + +

+Il primo passo per capire il sistema di dipendenze è la +comprensione del concetto di dipendenza semplice: un pacchetto richiede +che un altro sia installato insieme ad esso per poter +funzionare. + + +

+Ad esempio, mail-crypt è un'estensione di emacs che aiuta a criptare le +mail con PGP. Se PGP non è installato, mail-crypt è inutile, quindi +mail-crypt ha una dipendenza semplice da PGP. Inoltre, dato che si tratta +di un'estensione di emacs, mail-crypt dipende anche da emacs, senza il +quale è totalmente inutile. + +

+L'altro tipo di dipendenza importante da capire è la dipendenza di +conflitto; con questa, un pacchetto che venga installato insieme ad un +altro pacchetto non funziona, e si hanno seri problemi al sistema. +Come esempio, si consideri un programma di trasporto della posta, +quale sendmail, exim o qmail: non è possibile averne due contemporaneamente, +perché entrambi hanno bisogno di restare in ascolto sulla stessa porta di rete +per ricevere la posta. Tentare di installarne due danneggerebbe seriamente il +sistema, quindi ciascun programma di trasporto della posta ha una +dipendenza di conflitto con tutti gli altri. + +

+Come ulteriore complicazione, c'è la possibilità che un pacchetto +voglia prendere il posto di un altro; ad esempio, exim e sendmail per molte +cose sono identici, dato che entrambi gestiscono la posta e comprendono +un'interfaccia comune, quindi il sistema di pacchettizzazione deve dichiarare +che sono entrambi agenti di trasporto della posta, e che gli altri +pacchetti a cui serve uno dei due devono dipendere da un pacchetto +fittizio agente-di-trasporto-della-posta. Quando si modificano +a mano i pacchetti, questo può portare a moltissima confusione. + +

+In ciascun momento una singola dipendenza può essere soddisfatta o meno +dai pacchetti già installati; APT cerca di risolvere i problemi +di dipendenze con un buon numero di algoritmi automatici, che aiutano +a selezionare i pacchetti da installare. + + + + + + +apt-get + +

+apt-get fornisce un modo semplice di installare i pacchetti dalla +linea di comando. Diversamente da dpkg, apt-get non +capisce i nomi dei file .deb, ma utilizza il vero nome dei pacchetti, +e può installare archivi .deb solo da una fonte. + +

+La prima Se state usando un proxy server http, dovete prima ancora +impostare la variabile d'ambiente http_proxy; vedere +sources.list(5). +cosa da fare prima di usare apt-get è impostare l'elenco dei +pacchetti dalle fonti in modo che il programma sappia quali pacchetti +sono disponibili. Lo si fa con apt-get update. Ad esempio, + +

+ +# apt-get update +Get http://ftp.de.debian.org/debian-non-US/ stable/binary-i386/ Packages +Get http://llug.sep.bnl.gov/debian/ testing/contrib Packages +Reading Package Lists... Done +Building Dependency Tree... Done + + +

+Dopo aver aggiornato l'elenco si possono usare molti comandi: + +upgrade +Upgrade tenterà di fare un aggiornamento indolore del sistema completo, +senza installare nuovi pacchetti o rimuoverne di esistenti, e senza +aggiornare un pacchetto che possa rovinarne altri. Upgrade farà un elenco +di tutti i pacchetti che non avrà potuto aggiornare, cosa che in genere +significa che questi dipendono da nuovi pacchetti o vanno in conflitto +con altri. Per forzare la loro installazione si può usare +dselect o apt-get install. + +install +Install viene usato per installare i singoli pacchetti dando il loro nome. +Il pacchetto viene automaticamente scaricato ed installato, cosa molto utile +se già se ne conosce il nome e non si vuole entrare in grafica per +selezionarlo. Al comando si possono passare anche più pacchetti, che saranno +tutti scaricati. L'installazione automatica cerca di risolvere i problemi +di dipendenze con gli altri pacchetti elencati, stampa un riassunto e +chiede conferma se si devono modificare altri pacchetti che non siano quelli +sulla linea di comando. + +dist-upgrade +Dist-upgrade fa un aggiornamento completo, progettato in modo da rendere +semplici gli aggiornamenti tra versioni di Debian. Usa un algoritmo +sofisticato per determinare il miglior insieme di pacchetti da installare, +aggiornare e rimuovere per arrivare alla versione più aggiornata +del sistema possibile. In alcune situazioni può essere vantaggioso usare +dist-upgrade invece che sprecare tempo a risolvere manualmente le +dipendenze con dselect. Una volta completato dist-upgrade, si può +usare dselect per installare eventuali pacchetti che sono stati +tralasciati. + +

+È importante controllare attentamente cosa intende fare dist-upgrade, +dato che le sue decisioni a volte possono essere abbastanza sorprendenti. + + +

+apt-get ha diverse opzioni a linea di comando, che vengono +documentate dettagliatamente nella sua pagina man, +. L'opzione più utile è +-d, che non installa i file scaricati: se il sistema deve +scaricare un gran numero di pacchetti, non è bene farglieli installare +subito, in caso dovesse andare male qualcosa. Dopo aver usato -d, +gli archivi scaricati possono essere installati semplicemente dando di +nuovo lo stesso comando senza l'opzione -d. + + + + + +DSelect +

+Il metodo APT di dselect fornisce tutte le funzionalità di APT +all'interno dell'interfaccia grafica di selezione dei pacchetti +dselect. dselect viene usato per selezionare i pacchetti +da installare o rimuovere, ed APT li installa. + +

+Per abilitare il metodo APT dovete selezionare [A]ccess in dselect +e scegliere il metodo APT; vi verrà chiesto un insieme di fonti +(Sources), cioè di posti da cui scaricare gli archivi. +Tali fonti possono essere siti Internet remoti, mirror locali di Debian +o CDROM; ciascuna di esse può fornire una parte dell'archivio Debian, +ed APT le combinerà insieme in un set completo di pacchetti. Se avete un +CDROM è una buona idea indicare quello per primo, e poi i mirror, in modo +da avere accesso alle ultime versioni; APT userà in questo modo automaticamente +i pacchetti sul CDROM prima di scaricarli da Internet. + +

+ + Set up a list of distribution source locations + + Please give the base URL of the debian distribution. + The access schemes I know about are: http file + + For example: + file:/mnt/debian, + ftp://ftp.debian.org/debian, + http://ftp.de.debian.org/debian, + + + URL [http://llug.sep.bnl.gov/debian]: + + +

+La configurazione delle fonti inizia chiedendo la base dell'archivio Debian, +propone come default un mirror HTTP, e poi chiede la distribuzione +da scaricare. + +

+ + Please give the distribution tag to get or a path to the + package file ending in a /. The distribution + tags are typically something like: stable unstable testing non-US + + Distribution [stable]: + + +

+La distribuzione (``distribution'') fa riferimento alla versione Debian +dell'archivio: stable è l'ultima rilasciata, ed unstable +è quella di sviluppo. non-US è disponibile solo su alcuni mirror, +e contiene dei pacchetti in cui viene usata della tecnologia di criptazione +o altre cose che non possano essere esportate dagli Stati Uniti; importare +questi pacchetti negli US è però legale. + +

+ + Please give the components to get + The components are typically something like: main contrib non-free + + Components [main contrib non-free]: + + +

+L'elenco dei componenti (``components'') si riferisce alla lista di +sotto-distribuzioni da scaricare. Ciascuna distribuzione viene divisa in +base al copyright del software: la main contiene pacchetti la cui licenza +soddisfa le DFSG, mentre contrib e non-free contengono software che ha +diverse restrizioni sull'uso e sulla distribuzione. + +

+Si possono inserire un qualsiasi numero di fonti, e lo script di +configurazione continuerà a chiedere fino a che abbiate specificato tutti gli +elementi che volete. + +

+Prima di cominciare ad usare dselect è necessario aggiornare +l'elenco dei pacchetti disponibili selezionando [U]pdate dal menù: +si tratta di un sovrainsieme di ciò che fa apt-get update, +che rende l'informazione scaricata disponibile a +dselect. [U]pdate deve essere fatto anche se prima è stato dato +apt-get update. + +

+Si può a questo punto continuare selezionando i pacchetti desiderati +usando [S]elect e poi installando con [I]nstall. Se si usa il metodo APT, +i comandi [C]onfig e [R]emove non hanno significato, dato che entrambe le +fasi sono contenute in [I]nstall. + +

+Per default APT rimuoverà automaticamente i pacchetti che sono stati installati +con successo. Per modificare questo comportamento, si inserisca +Dselect::clean "prompt"; in /etc/apt/apt.conf. + + + + + +L'interfaccia + +

+Entrambi i metodi, dselect APT ed apt-get, condividono la +stessa interfaccia; si tratta di un sistema semplice che indica in genere +cosa sta per fare, e poi lo fa. + +Il metodo dselect è in realtà un insieme di script di wrapper ad +apt-get. Il metodo fornisce delle funzionalità maggiori del +solo apt-get. + +Dopo la stampa di un riassunto delle operazioni che saranno fatte, +APT stampa dei messaggi informativi sullo stato del sistema, in modo che +possiate avere davanti agli occhi a quale punto dell'operazione si trova, +e quanto ancora si deve aspettare. + + +Avvio + +

+Prima di ciascuna operazione, eccetto l'aggiornamento della lista, APT +compie alcune operazioni per prepararsi, oltre a dei controlli dello +stato del sistema. In qualsiasi momento le stesse operazioni possono essere +fatte con apt-get check +

+ +# apt-get check +Reading Package Lists... Done +Building Dependancy Tree... Done + + +

+La prima cosa che fa è leggere tutti i file dei pacchetti in memoria, +usando uno schema di caching in modo da rendere la stessa operazione più +veloce la seconda volta che la si fa. Se alcuni dei file dei pacchetti +non vengono trovati, sono ignorati e viene stampato un avvertimento +all'uscita di apt-get. + +

+L'operazione finale consiste in un'analisi dettagliata delle +dipendenze del sistema: viene controllato che tutte le dipendenze dei +singoli pacchetti installati o non scompattati siano soddisfatte. +Se vengono individuati dei problemi, viene stampato un resoconto, +ed apt-get esce senza eseguire alcuna operazione. + +

+ +# apt-get check +Reading Package Lists... Done +Building Dependancy Tree... Done +You might want to run apt-get -f install' to correct these. +Sorry, but the following packages have unmet dependencies: + 9fonts: Depends: xlib6g but it is not installed + uucp: Depends: mailx but it is not installed + blast: Depends: xlib6g (>= 3.3-5) but it is not installed + adduser: Depends: perl-base but it is not installed + aumix: Depends: libgpmg1 but it is not installed + debiandoc-sgml: Depends: sgml-base but it is not installed + bash-builtins: Depends: bash (>= 2.01) but 2.0-3 is installed + cthugha: Depends: svgalibg1 but it is not installed + Depends: xlib6g (>= 3.3-5) but it is not installed + libreadlineg2: Conflicts:libreadline2 (<< 2.1-2.1) + + +

+In questo esempio il sistema ha molti problemi, tra cui uno piuttosto serio +con la libreadlineg2. Per ciascun pacchetto che ha dipendenze non soddisfatte, +viene stampata una linea che indica il pacchetto che crea il problema e +quali problemi ci sono. Viene inclusa inoltre una breve spiegazione +del perché il pacchetto ha un problema di dipendenze. + +

+Ci sono due modi in cui un sistema possa arrivare in uno stato problematico +di questo genere: il primo è causato dal fatto che dpkg possa +mancare alcune relazioni sottili tra pacchetti durante un aggiornamento +del sistemaAPT considera comunque tutte le dipendenze note, +e cerca di prevenire problemi ai pacchetti; il secondo è possibile +se l'installazione di un pacchetto fallisce, ed in questo caso è possibile +che un pacchetto venga scompattato senza che tutti quelli da cui dipende +siano stati installati. + +

+La seconda possibilità è meno seria della prima, dato che APT gestisce +l'ordine di installazione dei pacchetti; in entrambi i casi l'opzione +-f di apt-get gli farà trovare una soluzione e lo farà +continuare. Il metodo APT di dselect comprende sempre l'opzione +-f per permettere di configurare facilmente anche i pacchetti con +script errati. + +

+Se viene usata però l'opzione -f per correggere un sistema in uno +stato molto problematico, è possibile che anche con l'opzione il programma +fallisca, subito o durante la sequenza di installazione. In entrambi i casi +è necessario usare dpkg a mano (probabilmente usando delle opzioni +di forzatura) per correggere quanto basta per poter fare continuare APT. + + + +Il resoconto sullo stato + +

+Prima di procedere, apt-get presenterà un resoconto delle operazioni +che sta per fare. In genere tale resoconto varierà con il tipo di operazioni +da fare, ma ci sono alcuni elementi comuni: in tutti i casi gli elenchi +dipendono dallo stato finale delle cose, e tengono conto dell'opzione +-f e di altre attività rilevanti per il comando da eseguire. + +L'elenco dei pacchetti Extra +

+ +The following extra packages will be installed: + libdbd-mysql-perl xlib6 zlib1 xzx libreadline2 libdbd-msql-perl + mailpgp xdpkg fileutils pinepgp zlib1g xlib6g perl-base + bin86 libgdbm1 libgdbmg1 quake-lib gmp2 bcc xbuffy + squake pgp-i python-base debmake ldso perl libreadlineg2 + ssh + + +

+L'elenco dei pacchetti Extra mostra tutti i pacchetti che verranno installati +o aggiornati oltre a quelli indicati sulla linea di comando. Viene generato +solo per il comando install. I pacchetti elencati sono spesso il +risultato di un'operazione di auto installazione (Auto Install). + + +I pacchetti da rimuovere +

+ +The following packages will be REMOVED: + xlib6-dev xpat2 tk40-dev xkeycaps xbattle xonix + xdaliclock tk40 tk41 xforms0.86 ghostview xloadimage xcolorsel + xadmin xboard perl-debug tkined xtetris libreadline2-dev perl-suid + nas xpilot xfig + + +

+L'elenco dei pacchetti da rimuovere (Remove) indica tutti i pacchetti che +verranno rimossi dal sistema. Può essere mostrato per una qualsiasi delle +operazioni, e deve sempre essere esaminato attentamente per assicurarsi +che non venga eliminato qualcosa di importante. Con l'opzione -f +è particolarmente probabile che vengano eliminati dei pacchetti, ed in questo +caso va fatta estrema attenzione. La lista può contenere dei pacchetti +che verranno rimossi perché sono già rimossi parzialmente, forse a causa +di un'installazione non terminata correttamente. + + +L'elenco dei nuovi pacchetti installati +

+ +The following NEW packages will installed: + zlib1g xlib6g perl-base libgdbmg1 quake-lib gmp2 pgp-i python-base + + +

+L'elenco dei nuovi pacchetti installati (New) è semplicemente un appunto +su quello che accadrà. I pacchetti nell'elenco non sono al momento installati +nel sistema, ma lo saranno alla fine delle operazioni di APT. + + +L'elenco dei pacchetti trattenuti +

+ +The following packages have been kept back + compface man-db tetex-base msql libpaper svgalib1 + gs snmp arena lynx xpat2 groff xscreensaver + + +

+In ogni caso in cui il sistema viene aggiornato nel suo insieme, c'è la +possibilità che non possano venire installate nuove versioni di alcuni +pacchetti, dato che potrebbero richiedere l'installazione di pacchetti non +presenti nel sistema, o entrare in conflitto con altri già presenti. +In questo caso, il pacchetto viene elencato nella lista di quelli +trattenuti (Kept Back). Il miglior modo per convincere i pacchetti +elencati in questa lista è di installarli con apt-get install o +usare dselect per risolvere i problemi. + + +Messaggi di attenzione sui pacchetti trattenuti +

+ +The following held packages will be changed: + cvs + + +

+A volte si può richiedere ad APT di installare un pacchetto +che è stato trattenuto; in questi casi viene stampato un messaggio di +attenzione, che avverte che il pacchetto verrà modificato. Questo +dovrebbe accadere solo durante operazioni di dist-upgrade o di install. + + +Resoconto finale +

+Infine, APT stamperà un riassunto di tutte le modifiche che accadranno. + +

+ +206 packages upgraded, 8 newly installed, 23 to remove and 51 not upgraded. +12 packages not fully installed or removed. +Need to get 65.7M/66.7M of archives. After unpacking 26.5M will be used. + + +

+La prima linea del riassunto è semplicemente una versione ridotta di tutte +le liste, ed include il numero di aggiornamenti -- cioè dei pacchetti +già installati per cui sono disponibili nuove versioni. La seconda +linea indica il numero di pacchetti con problemi di configurazione, +probabilmente in conseguenza di un'installazione non andata a buon fine. +La linea finale indica i requisiti di spazio dell'installazione: i primi +due numeri indicano rispettivamente il numero di byte che devono +essere trasferiti da posizioni remote, ed il secondo la dimensione totale +di tutti gli archivi necessari per l'installazione. Il numero successivo +indica la differenza in dimensione tra i pacchetti già installati +e quelli che lo saranno, ed è approssimativamente equivalente allo spazio +richiesto in /usr dopo l'installazione. Se si stanno rimuovendo dei +pacchetti, il valore può indicare lo spazio che verrà liberato. + +

+Si possono generare altri resoconti usando l'opzione -u per mostrare +i pacchetti da aggiornare, ma sono simili all'esempio precedente. + + + +La visualizzazione dello stato +

+Durante il download degli archivi e dei file dei pacchetti, APT +stampa una serie di messaggi di stato. + +

+ +# apt-get update +Get:1 http://ftp.de.debian.org/debian-non-US/ stable/non-US/ Packages +Get:2 http://llug.sep.bnl.gov/debian/ testing/contrib Packages +Hit http://llug.sep.bnl.gov/debian/ testing/main Packages +Get:4 http://ftp.de.debian.org/debian-non-US/ unstable/binary-i386/ Packages +Get:5 http://llug.sep.bnl.gov/debian/ testing/non-free Packages +11% [5 testing/non-free `Waiting for file' 0/32.1k 0%] 2203b/s 1m52s + + +

+Le linee che cominciano con Get vengono stampate quando APT inizia +a scaricare un file, e l'ultima linea indica il progresso dell'operazione. +Il primo valore in percentuale indica la percentuale totale di tutti i file; +dato che la dimensione dei file Package non è nota, purtroppo a volte +apt-get update fa una stima poco accurata. + +

+La sezione successiva della linea di stato viene ripetuta una volta per +ciascuna fase del download, ed indica l'operazione in corso, insieme +ad alcune informazioni utili su cosa stia accadendo. A volte questa +sezione contiene solamente Forking, che significa che il sistema +operativo sta caricando il modulo. La prima parola dopo la parentesi quadra +aperta è il nome breve dell'oggetto che si sta scaricando, che per gli archivi +è il nome del pacchetto. + +

+All'interno delle virgolette c'è una stringa informativa, che indica il +progresso della fase di negoziazione del download. Tipicamente comincia con +Connecting, procede con Waiting for file e poi con +Downloading o Resuming. Il valore finale è il numero di byte +che sono stati scaricati dal sito remoto: una volta cominciato il +download viene rappresentato come 102/10.2k, che indica che +sono stati scaricati 102 byte di 10.2 kilobyte. La dimensione totale +viene sempre espressa in notazione a quattro cifre, per risparmiare +spazio. Dopo la dimensione viene indicato un indicatore +progressivo della percentuale del file. Il penultimo elemento è la velocità +istantanea media, che viene aggiornata ogni 5 secondi, e riflette la +velocità di trasferimento dei dati in quel periodo. Infine, viene +visualizzato il tempo stimato per il trasferimento, che viene aggiornato +periodicamente e riflette il tempo necessario per completare tutte le +operazioni alla velocità di trasferimento mostrata. + +

+La visualizzazione dello stato viene aggiornata ogni mezzo secondo per +fornire un feedback costante del processo di download, e le linee Get +scorrono indietro quando viene cominciato il download di un nuovo file. +Dato che la visualizzazione dello stato viene costantemente +aggiornata, non è adatta per essere registrata in un file; per non +visualizzarla si può usare l'opzione -q. + + + +Dpkg + +

+APT usa dpkg per installare gli archivi e passerà all'interfaccia +dpkg una volta finito il download. +dpkg porrà anche alcune domande durante la manipolazione dei +pacchetti, ed i pacchetti stessi +potranno farne altre. Prima di ciascuna domanda viene +proposta una descrizione di quello che sta per chiedere, e le domande +sono troppo diverse per poter essere discusse in maniera completa in questa +occasione. + + + + + + diff --git a/doc/it/makefile b/doc/it/makefile new file mode 100644 index 000000000..b7851768a --- /dev/null +++ b/doc/it/makefile @@ -0,0 +1,11 @@ +# -*- make -*- +BASE=../.. +SUBDIR=doc/it + +# Bring in the default rules +include ../../buildlib/defaults.mak + +# Debian Doc SGML Documents +SOURCE = guide.it.sgml +DEBIANDOC_HTML_OPTIONS=-l it +include $(DEBIANDOC_H) diff --git a/doc/makefile b/doc/makefile index 2a2663fb3..0f6d5afa3 100644 --- a/doc/makefile +++ b/doc/makefile @@ -7,7 +7,7 @@ SUBDIRS= $(dir $(wildcard */makefile)) include ../buildlib/defaults.mak # Debian Doc SGML Documents -SOURCE = dpkg-tech.sgml design.sgml files.sgml guide.sgml guide.it.sgml \ +SOURCE = dpkg-tech.sgml design.sgml files.sgml guide.sgml \ cache.sgml method.sgml offline.sgml include $(DEBIANDOC_H) -- cgit v1.2.3 From 7652e03e9909ac65dab11a8cabb9ea5b77ef95ca Mon Sep 17 00:00:00 2001 From: David Kalnischkies Date: Thu, 1 Oct 2009 18:33:22 +0200 Subject: add guide.sgml and offline.sgml to the "translatable with po4a"-group Fix also the buildsystem for building the coresponding docs from these two files if they are exist for this language so we don't need to change the makefiles for ja and fr - and can also use the same simple makefiles for it and pl which ship these files as not-yet-with-po4a-translated (and currently no man page translation.) --- doc/it/makefile | 8 +- doc/makefile | 4 +- doc/pl/makefile | 8 +- doc/po/apt-doc.pot | 1084 +++++++++++++++++++++++++++++++++++++++++- doc/po/fr.po | 1250 +++++++++++++++++++++++++++++++++++++++++++----- doc/po/ja.po | 1340 ++++++++++++++++++++++++++++++++++++++++++++-------- doc/po4a.conf | 9 +- 7 files changed, 3371 insertions(+), 332 deletions(-) (limited to 'doc') diff --git a/doc/it/makefile b/doc/it/makefile index b7851768a..2179ec15f 100644 --- a/doc/it/makefile +++ b/doc/it/makefile @@ -5,7 +5,7 @@ SUBDIR=doc/it # Bring in the default rules include ../../buildlib/defaults.mak -# Debian Doc SGML Documents -SOURCE = guide.it.sgml -DEBIANDOC_HTML_OPTIONS=-l it -include $(DEBIANDOC_H) +# Language Code of this translation +LC=it + +include $(PO4A_MANPAGE_H) diff --git a/doc/makefile b/doc/makefile index 0f6d5afa3..fe53aba48 100644 --- a/doc/makefile +++ b/doc/makefile @@ -7,8 +7,8 @@ SUBDIRS= $(dir $(wildcard */makefile)) include ../buildlib/defaults.mak # Debian Doc SGML Documents -SOURCE = dpkg-tech.sgml design.sgml files.sgml guide.sgml \ - cache.sgml method.sgml offline.sgml +SOURCE = $(wildcard *.sgml) +DEBIANDOC_HTML_OPTIONS=-l en include $(DEBIANDOC_H) # XML man pages diff --git a/doc/pl/makefile b/doc/pl/makefile index 94939e156..7e77b29b9 100644 --- a/doc/pl/makefile +++ b/doc/pl/makefile @@ -5,7 +5,7 @@ SUBDIR=doc/pl # Bring in the default rules include ../../buildlib/defaults.mak -# Debian Doc SGML Documents -SOURCE = offline.pl.sgml -DEBIANDOC_HTML_OPTIONS=-l pl -include $(DEBIANDOC_H) +# Language Code of this translation +LC=pl + +include $(PO4A_MANPAGE_H) diff --git a/doc/po/apt-doc.pot b/doc/po/apt-doc.pot index aeb624948..82a4afe67 100644 --- a/doc/po/apt-doc.pot +++ b/doc/po/apt-doc.pot @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2009-09-26 11:35+0300\n" +"POT-Creation-Date: 2009-10-01 18:09+0300\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -1136,7 +1136,7 @@ msgstr "" #. type: Content of: #: apt-cache.8.xml:234 msgid "" -"Note that a package which APT knows of is not nessasarily available to " +"Note that a package which APT knows of is not necessarily available to " "download, installable or installed, e.g. virtual packages are also listed in " "the generated list." msgstr "" @@ -2716,8 +2716,8 @@ msgid "" "November 2008" msgstr "" -#. type: Content of: -#: apt-get.8.xml:22 apt-get.8.xml:29 +#. type: +#: apt-get.8.xml:22 apt-get.8.xml:29 guide.sgml:96 msgid "apt-get" msgstr "" @@ -2792,8 +2792,8 @@ msgid "" "advance." msgstr "" -#. type: Content of: -#: apt-get.8.xml:147 +#. type: +#: apt-get.8.xml:147 guide.sgml:121 msgid "upgrade" msgstr "" @@ -2829,8 +2829,8 @@ msgid "" "removal of old and the installation of new packages)." msgstr "" -#. type: Content of: -#: apt-get.8.xml:170 +#. type: +#: apt-get.8.xml:170 guide.sgml:140 msgid "dist-upgrade" msgstr "" @@ -2848,8 +2848,8 @@ msgid "" "for a mechanism for overriding the general settings for individual packages." msgstr "" -#. type: Content of: -#: apt-get.8.xml:183 +#. type: +#: apt-get.8.xml:183 guide.sgml:131 msgid "install" msgstr "" @@ -2960,8 +2960,7 @@ msgid "" "the newest available version of that source package while respect the " "default release, set with the option " "APT::Default-Release, the option or " -"per package with with the pkg/release syntax, if " -"possible." +"per package with the pkg/release syntax, if possible." msgstr "" #. type: Content of: @@ -6856,3 +6855,1064 @@ msgstr "" #: sources.list.5.xml:222 msgid "&apt-cache; &apt-conf;" msgstr "" + +#. type: +#: guide.sgml:4 +msgid "APT User's Guide" +msgstr "" + +#. type: +#: guide.sgml:6 offline.sgml:6 +msgid "Jason Gunthorpe jgg@debian.org" +msgstr "" + +#. type: +#: guide.sgml:7 +msgid "$Id: guide.sgml,v 1.7 2003/04/26 23:26:13 doogie Exp $" +msgstr "" + +#. type: +#: guide.sgml:11 +msgid "" +"This document provides an overview of how to use the the APT package " +"manager." +msgstr "" + +#. type: +#: guide.sgml:15 +msgid "Copyright © Jason Gunthorpe, 1998." +msgstr "" + +#. type:

+#: guide.sgml:21 offline.sgml:22 +msgid "" +"\"APT\" and this document are free software; you can redistribute them " +"and/or modify them under the terms of the GNU General Public License as " +"published by the Free Software Foundation; either version 2 of the License, " +"or (at your option) any later version." +msgstr "" + +#. type:

+#: guide.sgml:24 offline.sgml:25 +msgid "" +"For more details, on Debian GNU/Linux systems, see the file " +"/usr/share/common-licenses/GPL for the full license." +msgstr "" + +#. type: +#: guide.sgml:32 +msgid "General" +msgstr "" + +#. type:

+#: guide.sgml:38 +msgid "" +"The APT package currently contains two sections, the APT " +"dselect method and the apt-get command line user " +"interface. Both provide a way to install and remove packages as well as " +"download new packages from the Internet." +msgstr "" + +#. type: +#: guide.sgml:39 +msgid "Anatomy of the Package System" +msgstr "" + +#. type:

+#: guide.sgml:44 +msgid "" +"The Debian packaging system has a large amount of information associated " +"with each package to help assure that it integrates cleanly and easily into " +"the system. The most prominent of its features is the dependency system." +msgstr "" + +#. type:

+#: guide.sgml:52 +msgid "" +"The dependency system allows individual programs to make use of shared " +"elements in the system such as libraries. It simplifies placing infrequently " +"used portions of a program in separate packages to reduce the number of " +"things the average user is required to install. Also, it allows for choices " +"in mail transport agents, X servers and so on." +msgstr "" + +#. type:

+#: guide.sgml:57 +msgid "" +"The first step to understanding the dependency system is to grasp the " +"concept of a simple dependency. The meaning of a simple dependency is that a " +"package requires another package to be installed at the same time to work " +"properly." +msgstr "" + +#. type:

+#: guide.sgml:63 +msgid "" +"For instance, mailcrypt is an emacs extension that aids in encrypting email " +"with GPG. Without GPGP installed mail-crypt is useless, so mailcrypt has a " +"simple dependency on GPG. Also, because it is an emacs extension it has a " +"simple dependency on emacs, without emacs it is completely useless." +msgstr "" + +#. type:

+#: guide.sgml:73 +msgid "" +"The other important dependency to understand is a conflicting dependency. It " +"means that a package, when installed with another package, will not work and " +"may possibly be extremely harmful to the system. As an example consider a " +"mail transport agent such as sendmail, exim or qmail. It is not possible to " +"have two mail transport agents installed because both need to listen to the " +"network to receive mail. Attempting to install two will seriously damage the " +"system so all mail transport agents have a conflicting dependency with all " +"other mail transport agents." +msgstr "" + +#. type:

+#: guide.sgml:83 +msgid "" +"As an added complication there is the possibility for a package to pretend " +"to be another package. Consider that exim and sendmail for many intents are " +"identical, they both deliver mail and understand a common interface. Hence, " +"the package system has a way for them to declare that they are both " +"mail-transport-agents. So, exim and sendmail both declare that they provide " +"a mail-transport-agent and other packages that need a mail transport agent " +"depend on mail-transport-agent. This can add a great deal of confusion when " +"trying to manually fix packages." +msgstr "" + +#. type:

+#: guide.sgml:88 +msgid "" +"At any given time a single dependency may be met by packages that are " +"already installed or it may not be. APT attempts to help resolve dependency " +"issues by providing a number of automatic algorithms that help in selecting " +"packages for installation." +msgstr "" + +#. type:

+#: guide.sgml:102 +msgid "" +"apt-get provides a simple way to install packages from the " +"command line. Unlike dpkg, apt-get does not " +"understand .deb files, it works with the package's proper name and can only " +"install .deb archives from a Source." +msgstr "" + +#. type:

+#: guide.sgml:109 +msgid "" +"The first

If you are using an http proxy server you must set " +"the http_proxy environment variable first, see " +"sources.list(5)

 thing that should be done before using " +"apt-get is to fetch the package lists from the Sources " +"so that it knows what packages are available. This is done with apt-get " +"update. For instance," +msgstr "" + +#. type: +#: guide.sgml:116 +#, no-wrap +msgid "" +"# apt-get update\n" +"Get http://ftp.de.debian.org/debian-non-US/ stable/binary-i386/ Packages\n" +"Get http://llug.sep.bnl.gov/debian/ testing/contrib Packages\n" +"Reading Package Lists... Done\n" +"Building Dependency Tree... Done" +msgstr "" + +#. type:

+#: guide.sgml:120 +msgid "Once updated there are several commands that can be used:" +msgstr "" + +#. type:

+#: guide.sgml:131 +msgid "" +"Upgrade will attempt to gently upgrade the whole system. Upgrade will never " +"install a new package or remove an existing package, nor will it ever " +"upgrade a package that might cause some other package to break. This can be " +"used daily to relatively safely upgrade the system. Upgrade will list all of " +"the packages that it could not upgrade, this usually means that they depend " +"on new packages or conflict with some other package. dselect or " +"apt-get install can be used to force these packages to install." +msgstr "" + +#. type:

+#: guide.sgml:140 +msgid "" +"Install is used to install packages by name. The package is automatically " +"fetched and installed. This can be useful if you already know the name of " +"the package to install and do not want to go into a GUI to select it. Any " +"number of packages may be passed to install, they will all be " +"fetched. Install automatically attempts to resolve dependency problems with " +"the listed packages and will print a summary and ask for confirmation if " +"anything other than its arguments are changed." +msgstr "" + +#. type:

+#: guide.sgml:149 +msgid "" +"Dist-upgrade is a complete upgrader designed to simplify upgrading between " +"releases of Debian. It uses a sophisticated algorithm to determine the best " +"set of packages to install, upgrade and remove to get as much of the system " +"to the newest release. In some situations it may be desired to use " +"dist-upgrade rather than spend the time manually resolving dependencies in " +"dselect. Once dist-upgrade has completed then " +"dselect can be used to install any packages that may have been " +"left out." +msgstr "" + +#. type:

+#: guide.sgml:152 +msgid "" +"It is important to closely look at what dist-upgrade is going to do, its " +"decisions may sometimes be quite surprising." +msgstr "" + +#. type:

+#: guide.sgml:163 +msgid "" +"apt-get has several command line options that are detailed in " +"its man page, . The most useful " +"option is -d which does not install the fetched files. If the " +"system has to download a large number of package it would be undesired to " +"start installing them in case something goes wrong. When -d is used " +"the downloaded archives can be installed by simply running the command that " +"caused them to be downloaded again without -d." +msgstr "" + +#. type: +#: guide.sgml:168 +msgid "DSelect" +msgstr "" + +#. type:

+#: guide.sgml:173 +msgid "" +"The APT dselect method provides the complete APT system with " +"the dselect package selection GUI. dselect is used " +"to select the packages to be installed or removed and APT actually installs " +"them." +msgstr "" + +#. type:

+#: guide.sgml:184 +msgid "" +"To enable the APT method you need to to select [A]ccess in " +"dselect and then choose the APT method. You will be prompted " +"for a set of Sources which are places to fetch archives from. These " +"can be remote Internet sites, local Debian mirrors or CDROMs. Each source " +"can provide a fragment of the total Debian archive, APT will automatically " +"combine them to form a complete set of packages. If you have a CDROM then it " +"is a good idea to specify it first and then specify a mirror so that you " +"have access to the latest bug fixes. APT will automatically use packages on " +"your CDROM before downloading from the Internet." +msgstr "" + +#. type: +#: guide.sgml:198 +#, no-wrap +msgid "" +" Set up a list of distribution source locations\n" +"\t \n" +" Please give the base URL of the debian distribution.\n" +" The access schemes I know about are: http file\n" +"\t \n" +" For example:\n" +" file:/mnt/debian,\n" +" ftp://ftp.debian.org/debian,\n" +" http://ftp.de.debian.org/debian,\n" +" \n" +" \n" +" URL [http://llug.sep.bnl.gov/debian]:" +msgstr "" + +#. type:

+#: guide.sgml:205 +msgid "" +"The Sources setup starts by asking for the base of the Debian " +"archive, defaulting to a HTTP mirror. Next it asks for the distribution to " +"get." +msgstr "" + +#. type: +#: guide.sgml:212 +#, no-wrap +msgid "" +" Please give the distribution tag to get or a path to the\n" +" package file ending in a /. The distribution\n" +" tags are typically something like: stable unstable testing non-US\n" +" \n" +" Distribution [stable]:" +msgstr "" + +#. type:

+#: guide.sgml:222 +msgid "" +"The distribution refers to the Debian version in the archive, " +"stable refers to the latest released version and unstable " +"refers to the developmental version. non-US is only available on " +"some mirrors and refers to packages that contain encryption technology or " +"other things that cannot be exported from the United States. Importing these " +"packages into the US is legal however." +msgstr "" + +#. type: +#: guide.sgml:228 +#, no-wrap +msgid "" +" Please give the components to get\n" +" The components are typically something like: main contrib non-free\n" +" \n" +" Components [main contrib non-free]:" +msgstr "" + +#. type:

+#: guide.sgml:236 +msgid "" +"The components list refers to the list of sub distributions to fetch. The " +"distribution is split up based on software licenses, main being DFSG free " +"packages while contrib and non-free contain things that have various " +"restrictions placed on their use and distribution." +msgstr "" + +#. type:

+#: guide.sgml:240 +msgid "" +"Any number of sources can be added, the setup script will continue to prompt " +"until you have specified all that you want." +msgstr "" + +#. type:

+#: guide.sgml:247 +msgid "" +"Before starting to use dselect it is necessary to update the " +"available list by selecting [U]pdate from the menu. This is a super-set of " +"apt-get update that makes the fetched information available to " +"dselect. [U]pdate must be performed even if apt-get " +"update has been run before." +msgstr "" + +#. type:

+#: guide.sgml:253 +msgid "" +"You can then go on and make your selections using [S]elect and then perform " +"the installation using [I]nstall. When using the APT method the [C]onfig and " +"[R]emove commands have no meaning, the [I]nstall command performs both of " +"them together." +msgstr "" + +#. type:

+#: guide.sgml:258 +msgid "" +"By default APT will automatically remove the package (.deb) files once they " +"have been successfully installed. To change this behavior place " +"Dselect::clean \"prompt\"; in /etc/apt/apt.conf." +msgstr "" + +#. type: +#: guide.sgml:264 +msgid "The Interface" +msgstr "" + +#. type:

+#: guide.sgml:278 +msgid "" +"Both that APT dselect method and apt-get share the " +"same interface. It is a simple system that generally tells you what it will " +"do and then goes and does it.

The dselect method " +"actually is a set of wrapper scripts to apt-get. The method " +"actually provides more functionality than is present in apt-get " +"alone.

 After printing out a summary of what will happen APT " +"then will print out some informative status messages so that you can " +"estimate how far along it is and how much is left to do." +msgstr "" + +#. type: +#: guide.sgml:280 +msgid "Startup" +msgstr "" + +#. type:

+#: guide.sgml:284 +msgid "" +"Before all operations except update, APT performs a number of actions to " +"prepare its internal state. It also does some checks of the system's " +"state. At any time these operations can be performed by running apt-get " +"check." +msgstr "" + +#. type: +#: guide.sgml:289 +#, no-wrap +msgid "" +"# apt-get check\n" +"Reading Package Lists... Done\n" +"Building Dependency Tree... Done" +msgstr "" + +#. type:

+#: guide.sgml:297 +msgid "" +"The first thing it does is read all the package files into memory. APT uses " +"a caching scheme so this operation will be faster the second time it is " +"run. If some of the package files are not found then they will be ignored " +"and a warning will be printed when apt-get exits." +msgstr "" + +#. type:

+#: guide.sgml:303 +msgid "" +"The final operation performs a detailed analysis of the system's " +"dependencies. It checks every dependency of every installed or unpacked " +"package and considers if it is OK. Should this find a problem then a report " +"will be printed out and apt-get will refuse to run." +msgstr "" + +#. type: +#: guide.sgml:320 +#, no-wrap +msgid "" +"# apt-get check\n" +"Reading Package Lists... Done\n" +"Building Dependency Tree... Done\n" +"You might want to run apt-get -f install' to correct these.\n" +"Sorry, but the following packages have unmet dependencies:\n" +" 9fonts: Depends: xlib6g but it is not installed\n" +" uucp: Depends: mailx but it is not installed\n" +" blast: Depends: xlib6g (>= 3.3-5) but it is not installed\n" +" adduser: Depends: perl-base but it is not installed\n" +" aumix: Depends: libgpmg1 but it is not installed\n" +" debiandoc-sgml: Depends: sgml-base but it is not installed\n" +" bash-builtins: Depends: bash (>= 2.01) but 2.0-3 is installed\n" +" cthugha: Depends: svgalibg1 but it is not installed\n" +" Depends: xlib6g (>= 3.3-5) but it is not installed\n" +" libreadlineg2: Conflicts:libreadline2 (<< 2.1-2.1)" +msgstr "" + +#. type:

+#: guide.sgml:329 +msgid "" +"In this example the system has many problems, including a serious problem " +"with libreadlineg2. For each package that has unmet dependencies a line is " +"printed out indicating the package with the problem and the dependencies " +"that are unmet. A short explanation of why the package has a dependency " +"problem is also included." +msgstr "" + +#. type:

+#: guide.sgml:337 +msgid "" +"There are two ways a system can get into a broken state like this. The first " +"is caused by dpkg missing some subtle relationships between " +"packages when performing upgrades.

APT however considers all " +"known dependencies and attempts to prevent broken " +"packages

. The second is if a package installation fails " +"during an operation. In this situation a package may have been unpacked " +"without its dependents being installed." +msgstr "" + +#. type:

+#: guide.sgml:345 +msgid "" +"The second situation is much less serious than the first because APT places " +"certain constraints on the order that packages are installed. In both cases " +"supplying the -f option to apt-get will cause APT to " +"deduce a possible solution to the problem and then continue on. The APT " +"dselect method always supplies the -f option to allow " +"for easy continuation of failed maintainer scripts." +msgstr "" + +#. type:

+#: guide.sgml:351 +msgid "" +"However, if the -f option is used to correct a seriously broken " +"system caused by the first case then it is possible that it will either fail " +"immediately or the installation sequence will fail. In either case it is " +"necessary to manually use dpkg (possibly with forcing options) to correct " +"the situation enough to allow APT to proceed." +msgstr "" + +#. type: +#: guide.sgml:356 +msgid "The Status Report" +msgstr "" + +#. type:

+#: guide.sgml:363 +msgid "" +"Before proceeding apt-get will present a report on what will " +"happen. Generally the report reflects the type of operation being performed " +"but there are several common elements. In all cases the lists reflect the " +"final state of things, taking into account the -f option and any " +"other relevant activities to the command being executed." +msgstr "" + +#. type: +#: guide.sgml:364 +msgid "The Extra Package list" +msgstr "" + +#. type: +#: guide.sgml:372 +#, no-wrap +msgid "" +"The following extra packages will be installed:\n" +" libdbd-mysql-perl xlib6 zlib1 xzx libreadline2 libdbd-msql-perl\n" +" mailpgp xdpkg fileutils pinepgp zlib1g xlib6g perl-base\n" +" bin86 libgdbm1 libgdbmg1 quake-lib gmp2 bcc xbuffy\n" +" squake pgp-i python-base debmake ldso perl libreadlineg2\n" +" ssh" +msgstr "" + +#. type:

+#: guide.sgml:379 +msgid "" +"The Extra Package list shows all of the packages that will be installed or " +"upgraded in excess of the ones mentioned on the command line. It is only " +"generated for an install command. The listed packages are often the " +"result of an Auto Install." +msgstr "" + +#. type: +#: guide.sgml:382 +msgid "The Packages to Remove" +msgstr "" + +#. type: +#: guide.sgml:389 +#, no-wrap +msgid "" +"The following packages will be REMOVED:\n" +" xlib6-dev xpat2 tk40-dev xkeycaps xbattle xonix\n" +" xdaliclock tk40 tk41 xforms0.86 ghostview xloadimage xcolorsel\n" +" xadmin xboard perl-debug tkined xtetris libreadline2-dev perl-suid\n" +" nas xpilot xfig" +msgstr "" + +#. type:

+#: guide.sgml:399 +msgid "" +"The Packages to Remove list shows all of the packages that will be removed " +"from the system. It can be shown for any of the operations and should be " +"given a careful inspection to ensure nothing important is to be taken " +"off. The -f option is especially good at generating packages to " +"remove so extreme care should be used in that case. The list may contain " +"packages that are going to be removed because they are only partially " +"installed, possibly due to an aborted installation." +msgstr "" + +#. type: +#: guide.sgml:402 +msgid "The New Packages list" +msgstr "" + +#. type: +#: guide.sgml:406 +#, no-wrap +msgid "" +"The following NEW packages will installed:\n" +" zlib1g xlib6g perl-base libgdbmg1 quake-lib gmp2 pgp-i python-base" +msgstr "" + +#. type:

+#: guide.sgml:411 +msgid "" +"The New Packages list is simply a reminder of what will happen. The packages " +"listed are not presently installed in the system but will be when APT is " +"done." +msgstr "" + +#. type: +#: guide.sgml:414 +msgid "The Kept Back list" +msgstr "" + +#. type: +#: guide.sgml:419 +#, no-wrap +msgid "" +"The following packages have been kept back\n" +" compface man-db tetex-base msql libpaper svgalib1\n" +" gs snmp arena lynx xpat2 groff xscreensaver" +msgstr "" + +#. type:

+#: guide.sgml:428 +msgid "" +"Whenever the whole system is being upgraded there is the possibility that " +"new versions of packages cannot be installed because they require new things " +"or conflict with already installed things. In this case the package will " +"appear in the Kept Back list. The best way to convince packages listed there " +"to install is with apt-get install or by using dselect " +"to resolve their problems." +msgstr "" + +#. type: +#: guide.sgml:431 +msgid "Held Packages warning" +msgstr "" + +#. type: +#: guide.sgml:435 +#, no-wrap +msgid "" +"The following held packages will be changed:\n" +" cvs" +msgstr "" + +#. type:

+#: guide.sgml:441 +msgid "" +"Sometimes you can ask APT to install a package that is on hold, in such a " +"case it prints out a warning that the held package is going to be " +"changed. This should only happen during dist-upgrade or install." +msgstr "" + +#. type: +#: guide.sgml:444 +msgid "Final summary" +msgstr "" + +#. type:

+#: guide.sgml:447 +msgid "Finally, APT will print out a summary of all the changes that will occur." +msgstr "" + +#. type: +#: guide.sgml:452 +#, no-wrap +msgid "" +"206 packages upgraded, 8 newly installed, 23 to remove and 51 not " +"upgraded.\n" +"12 packages not fully installed or removed.\n" +"Need to get 65.7M/66.7M of archives. After unpacking 26.5M will be used." +msgstr "" + +#. type:

+#: guide.sgml:470 +msgid "" +"The first line of the summary simply is a reduced version of all of the " +"lists and includes the number of upgrades - that is packages already " +"installed that have new versions available. The second line indicates the " +"number of poorly configured packages, possibly the result of an aborted " +"installation. The final line shows the space requirements that the " +"installation needs. The first pair of numbers refer to the size of the " +"archive files. The first number indicates the number of bytes that must be " +"fetched from remote locations and the second indicates the total size of all " +"the archives required. The next number indicates the size difference between " +"the presently installed packages and the newly installed packages. It is " +"roughly equivalent to the space required in /usr after everything is " +"done. If a large number of packages are being removed then the value may " +"indicate the amount of space that will be freed." +msgstr "" + +#. type:

+#: guide.sgml:473 +msgid "" +"Some other reports can be generated by using the -u option to show packages " +"to upgrade, they are similar to the previous examples." +msgstr "" + +#. type: +#: guide.sgml:477 +msgid "The Status Display" +msgstr "" + +#. type:

+#: guide.sgml:481 +msgid "" +"During the download of archives and package files APT prints out a series of " +"status messages." +msgstr "" + +#. type: +#: guide.sgml:490 +#, no-wrap +msgid "" +"# apt-get update\n" +"Get:1 http://ftp.de.debian.org/debian-non-US/ stable/non-US/ Packages\n" +"Get:2 http://llug.sep.bnl.gov/debian/ testing/contrib Packages\n" +"Hit http://llug.sep.bnl.gov/debian/ testing/main Packages\n" +"Get:4 http://ftp.de.debian.org/debian-non-US/ unstable/binary-i386/ " +"Packages\n" +"Get:5 http://llug.sep.bnl.gov/debian/ testing/non-free Packages\n" +"11% [5 testing/non-free `Waiting for file' 0/32.1k 0%] 2203b/s 1m52s" +msgstr "" + +#. type:

+#: guide.sgml:500 +msgid "" +"The lines starting with Get are printed out when APT begins to " +"fetch a file while the last line indicates the progress of the download. The " +"first percent value on the progress line indicates the total percent done of " +"all files. Unfortunately since the size of the Package files is unknown " +"apt-get update estimates the percent done which causes some " +"inaccuracies." +msgstr "" + +#. type:

+#: guide.sgml:509 +msgid "" +"The next section of the status line is repeated once for each download " +"thread and indicates the operation being performed and some useful " +"information about what is happening. Sometimes this section will simply read " +"Forking which means the OS is loading the download module. The " +"first word after the [ is the fetch number as shown on the history " +"lines. The next word is the short form name of the object being " +"downloaded. For archives it will contain the name of the package that is " +"being fetched." +msgstr "" + +#. type:

+#: guide.sgml:524 +msgid "" +"Inside of the single quote is an informative string indicating the progress " +"of the negotiation phase of the download. Typically it progresses from " +"Connecting to Waiting for file to Downloading or " +"Resuming. The final value is the number of bytes downloaded from " +"the remote site. Once the download begins this is represented as " +"102/10.2k indicating that 102 bytes have been fetched and 10.2 " +"kilobytes is expected. The total size is always shown in 4 figure notation " +"to preserve space. After the size display is a percent meter for the file " +"itself. The second last element is the instantaneous average speed. This " +"values is updated every 5 seconds and reflects the rate of data transfer for " +"that period. Finally is shown the estimated transfer time. This is updated " +"regularly and reflects the time to complete everything at the shown transfer " +"rate." +msgstr "" + +#. type:

+#: guide.sgml:530 +msgid "" +"The status display updates every half second to provide a constant feedback " +"on the download progress while the Get lines scroll back whenever a new file " +"is started. Since the status display is constantly updated it is unsuitable " +"for logging to a file, use the -q option to remove the status " +"display." +msgstr "" + +#. type: +#: guide.sgml:535 +msgid "Dpkg" +msgstr "" + +#. type:

+#: guide.sgml:542 +msgid "" +"APT uses dpkg for installing the archives and will switch over " +"to the dpkg interface once downloading is " +"completed. dpkg will also ask a number of questions as it " +"processes the packages and the packages themselves may also ask several " +"questions. Before each question there is usually a description of what it is " +"asking and the questions are too varied to discuss completely here." +msgstr "" + +#. type: +#: offline.sgml:4 +msgid "Using APT Offline" +msgstr "" + +#. type: +#: offline.sgml:7 +msgid "$Id: offline.sgml,v 1.8 2003/02/12 15:06:41 doogie Exp $" +msgstr "" + +#. type: +#: offline.sgml:12 +msgid "" +"This document describes how to use APT in a non-networked environment, " +"specifically a 'sneaker-net' approach for performing upgrades." +msgstr "" + +#. type: +#: offline.sgml:16 +msgid "Copyright © Jason Gunthorpe, 1999." +msgstr "" + +#. type: +#: offline.sgml:32 +msgid "Introduction" +msgstr "" + +#. type: +#: offline.sgml:34 offline.sgml:65 offline.sgml:180 +msgid "Overview" +msgstr "" + +#. type:

+#: offline.sgml:40 +msgid "" +"Normally APT requires direct access to a Debian archive, either from a local " +"media or through a network. Another common complaint is that a Debian " +"machine is on a slow link, such as a modem and another machine has a very " +"fast connection but they are physically distant." +msgstr "" + +#. type:

+#: offline.sgml:51 +msgid "" +"The solution to this is to use large removable media such as a Zip disc or a " +"SuperDisk disc. These discs are not large enough to store the entire Debian " +"archive but can easily fit a subset large enough for most users. The idea is " +"to use APT to generate a list of packages that are required and then fetch " +"them onto the disc using another machine with good connectivity. It is even " +"possible to use another Debian machine with APT or to use a completely " +"different OS and a download tool like wget. Let remote host mean " +"the machine downloading the packages, and target host the one with " +"bad or no connection." +msgstr "" + +#. type:

+#: offline.sgml:57 +msgid "" +"This is achieved by creatively manipulating the APT configuration file. The " +"essential premis to tell APT to look on a disc for it's archive files. Note " +"that the disc should be formated with a filesystem that can handle long file " +"names such as ext2, fat32 or vfat." +msgstr "" + +#. type: +#: offline.sgml:63 +msgid "Using APT on both machines" +msgstr "" + +#. type:

+#: offline.sgml:71 +msgid "" +"APT being available on both machines gives the simplest configuration. The " +"basic idea is to place a copy of the status file on the disc and use the " +"remote machine to fetch the latest package files and decide which packages " +"to download. The disk directory structure should look like:" +msgstr "" + +#. type: +#: offline.sgml:80 +#, no-wrap +msgid "" +" /disc/\n" +" archives/\n" +" partial/\n" +" lists/\n" +" partial/\n" +" status\n" +" sources.list\n" +" apt.conf" +msgstr "" + +#. type: +#: offline.sgml:88 +msgid "The configuration file" +msgstr "" + +#. type:

+#: offline.sgml:96 +msgid "" +"The configuration file should tell APT to store its files on the disc and to " +"use the configuration files on the disc as well. The sources.list should " +"contain the proper sites that you wish to use from the remote machine, and " +"the status file should be a copy of /var/lib/dpkg/status from the " +"target host. Please note, if you are using a local archive you must " +"use copy URIs, the syntax is identical to file URIs." +msgstr "" + +#. type:

+#: offline.sgml:100 +msgid "" +"apt.conf must contain the necessary information to make APT use the " +"disc:" +msgstr "" + +#. type: +#: offline.sgml:124 +#, no-wrap +msgid "" +" APT\n" +" {\n" +" /* This is not necessary if the two machines are the same arch, it " +"tells\n" +" the remote APT what architecture the target machine is */\n" +" Architecture \"i386\";\n" +" \n" +" Get::Download-Only \"true\";\n" +" };\n" +" \n" +" Dir\n" +" {\n" +" /* Use the disc for state information and redirect the status file from\n" +" the /var/lib/dpkg default */\n" +" State \"/disc/\";\n" +" State::status \"status\";\n" +"\n" +" // Binary caches will be stored locally\n" +" Cache::archives \"/disc/archives/\";\n" +" Cache \"/tmp/\";\n" +" \n" +" // Location of the source list.\n" +" Etc \"/disc/\";\n" +" };" +msgstr "" + +#. type:

+#: offline.sgml:129 +msgid "" +"More details can be seen by examining the apt.conf man page and the sample " +"configuration file in /usr/share/doc/apt/examples/apt.conf." +msgstr "" + +#. type:

+#: offline.sgml:136 +msgid "" +"On the target machine the first thing to do is mount the disc and copy " +"/var/lib/dpkg/status to it. You will also need to create the " +"directories outlined in the Overview, archives/partial/ and " +"lists/partial/ Then take the disc to the remote machine and " +"configure the sources.list. On the remote machine execute the following:" +msgstr "" + +#. type: +#: offline.sgml:142 +#, no-wrap +msgid "" +" # export APT_CONFIG=\"/disc/apt.conf\"\n" +" # apt-get update\n" +" [ APT fetches the package files ]\n" +" # apt-get dist-upgrade\n" +" [ APT fetches all the packages needed to upgrade the target machine ]" +msgstr "" + +#. type:

+#: offline.sgml:149 +msgid "" +"The dist-upgrade command can be replaced with any-other standard APT " +"commands, particularly dselect-upgrade. You can even use an APT front end " +"such as dselect However this presents a problem in communicating " +"your selections back to the local computer." +msgstr "" + +#. type:

+#: offline.sgml:153 +msgid "" +"Now the disc contains all of the index files and archives needed to upgrade " +"the target machine. Take the disc back and run:" +msgstr "" + +#. type: +#: offline.sgml:159 +#, no-wrap +msgid "" +" # export APT_CONFIG=\"/disc/apt.conf\"\n" +" # apt-get check\n" +" [ APT generates a local copy of the cache files ]\n" +" # apt-get --no-d -o dir::state::status=/var/lib/dpkg/status dist-upgrade\n" +" [ Or any other APT command ]" +msgstr "" + +#. type:

+#: offline.sgml:165 +msgid "" +"It is necessary for proper function to re-specify the status file to be the " +"local one. This is very important!" +msgstr "" + +#. type:

+#: offline.sgml:172 +msgid "" +"If you are using dselect you can do the very risky operation of copying " +"disc/status to /var/lib/dpkg/status so that any selections you made on the " +"remote machine are updated. I highly recommend that people only make " +"selections on the local machine - but this may not always be possible. DO " +"NOT copy the status file if dpkg or APT have been run in the mean time!!" +msgstr "" + +#. type: +#: offline.sgml:178 +msgid "Using APT and wget" +msgstr "" + +#. type:

+#: offline.sgml:185 +msgid "" +"wget is a popular and portable download tool that can run on nearly " +"any machine. Unlike the method above this requires that the Debian machine " +"already has a list of available packages." +msgstr "" + +#. type:

+#: offline.sgml:190 +msgid "" +"The basic idea is to create a disc that has only the archive files " +"downloaded from the remote site. This is done by using the --print-uris " +"option to apt-get and then preparing a wget script to actually fetch the " +"packages." +msgstr "" + +#. type: +#: offline.sgml:196 +msgid "Operation" +msgstr "" + +#. type:

+#: offline.sgml:200 +msgid "" +"Unlike the previous technique no special configuration files are " +"required. We merely use the standard APT commands to generate the file list." +msgstr "" + +#. type: +#: offline.sgml:205 +#, no-wrap +msgid "" +" # apt-get dist-upgrade \n" +" [ Press no when prompted, make sure you are happy with the actions ]\n" +" # apt-get -qq --print-uris dist-upgrade > uris\n" +" # awk '{print \"wget -O \" $2 \" \" $1}' < uris > /disc/wget-script" +msgstr "" + +#. type:

+#: offline.sgml:210 +msgid "" +"Any command other than dist-upgrade could be used here, including " +"dselect-upgrade." +msgstr "" + +#. type:

+#: offline.sgml:216 +msgid "" +"The /disc/wget-script file will now contain a list of wget commands to " +"execute in order to fetch the necessary archives. This script should be run " +"with the current directory as the disc's mount point so as to save the " +"output on the disc." +msgstr "" + +#. type:

+#: offline.sgml:219 +msgid "The remote machine would do something like" +msgstr "" + +#. type: +#: offline.sgml:223 +#, no-wrap +msgid "" +" # cd /disc\n" +" # sh -x ./wget-script\n" +" [ wait.. ]" +msgstr "" + +#. type: +#: offline.sgml:228 +msgid "" +"Once the archives are downloaded and the disc returned to the Debian machine " +"installation can proceed using," +msgstr "" + +#. type: +#: offline.sgml:230 +#, no-wrap +msgid " # apt-get -o dir::cache::archives=\"/disc/\" dist-upgrade" +msgstr "" + +#. type:

+#: offline.sgml:234 +msgid "Which will use the already fetched archives on the disc." +msgstr "" diff --git a/doc/po/fr.po b/doc/po/fr.po index b95576e34..738408312 100644 --- a/doc/po/fr.po +++ b/doc/po/fr.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" -"POT-Creation-Date: 2009-09-26 11:35+0300\n" +"POT-Creation-Date: 2009-10-01 18:09+0300\n" "PO-Revision-Date: 2009-09-26 19:25+0200\n" "Last-Translator: Christian Perrier \n" "Language-Team: French \n" @@ -1023,8 +1023,8 @@ msgstr "" "\">\n" #. type: Plain text -#: apt.ent:350, no-wrap -#| msgid "Storage area for state information for each package resource specified in &sources-list; Configuration Item: Dir::State::Lists." +#: apt.ent:350 +#, no-wrap msgid "" "&statedir;/lists/\n" @@ -1040,8 +1040,8 @@ msgstr "" " \n" #. type: Plain text -#: apt.ent:355, no-wrap -#| msgid "Storage area for state information in transit. Configuration Item: Dir::State::Lists (implicit partial)." +#: apt.ent:355 +#, no-wrap msgid "" " &statedir;/lists/partial/\n" " Storage area for state information in transit.\n" @@ -1055,7 +1055,7 @@ msgstr "" " \n" "\">\n" -#. The last update date +#. The last update date #. type: Content of: #: apt-cache.8.xml:13 apt-config.8.xml:13 apt-extracttemplates.1.xml:13 #: apt-ftparchive.1.xml:13 apt-sortpkgs.1.xml:13 sources.list.5.xml:13 @@ -1538,12 +1538,6 @@ msgstr "pkgnames [ préfixe ]" #. type: Content of: #: apt-cache.8.xml:229 -#| msgid "" -#| "This command prints the name of each package in the system. The optional " -#| "argument is a prefix match to filter the name list. The output is " -#| "suitable for use in a shell tab complete function and the output is " -#| "generated extremely quickly. This command is best used with the option." msgid "" "This command prints the name of each package APT knows. The optional " "argument is a prefix match to filter the name list. The output is suitable " @@ -1551,19 +1545,27 @@ msgid "" "extremely quickly. This command is best used with the ." #. type: Content of: #: apt-cache.8.xml:234 +#, fuzzy +#| msgid "" +#| "Note that a package which APT knows of is not nessasarily available to " +#| "download, installable or installed, e.g. virtual packages are also listed " +#| "in the generated list." msgid "" -"Note that a package which APT knows of is not nessasarily available to " +"Note that a package which APT knows of is not necessarily available to " "download, installable or installed, e.g. virtual packages are also listed in " "the generated list." -msgstr "Veuillez noter qu'un paquet connu par APT n'est pas forcément disponible, installable ou installé. Par exemple, les paquets virtuels sont également affichés dans la liste." +msgstr "" +"Veuillez noter qu'un paquet connu par APT n'est pas forcément disponible, " +"installable ou installé. Par exemple, les paquets virtuels sont également " +"affichés dans la liste." #. type: Content of: #: apt-cache.8.xml:239 @@ -2446,25 +2448,6 @@ msgstr "Outil de création de fichiers d'index" #. type: Content of: #: apt-ftparchive.1.xml:36 -#| msgid "" -#| "apt-ftparchive " -#| " " -#| " " -#| " packagespathoverridepathprefix " -#| "sourcespathoverridepathprefix " -#| "contents path release path generate config-file section clean config-file " msgid "" "apt-ftparchive " " " @@ -2487,10 +2470,11 @@ msgstr "" "apt-ftparchive " " " " packagescheminoverride " +"packagescheminoverridepréfixe-de-chemin sourcescheminoverride #: apt-ftparchive.1.xml:82 apt-ftparchive.1.xml:106 -msgid "The option can be used to specify a binary caching DB." +msgid "" +"The option can be used to specify a binary caching DB." msgstr "" "On peut se servir de l'option pour demander un cache " "binaire." @@ -2721,8 +2706,10 @@ msgstr "" #. type: Content of: #: apt-ftparchive.1.xml:155 -msgid "The generate configuration has 4 separate sections, each described below." -msgstr "Ce fichier de configuration possède quatre sections, décrites ci-dessous." +msgid "" +"The generate configuration has 4 separate sections, each described below." +msgstr "" +"Ce fichier de configuration possède quatre sections, décrites ci-dessous." #. type: Content of: #: apt-ftparchive.1.xml:157 @@ -3565,7 +3552,7 @@ msgstr "" "<command>apt-ftparchive</command> retourne zéro si tout se passe bien, le " "nombre 100 en cas d'erreur." -#. The last update date +#. The last update date #. type: Content of: <refentry><refentryinfo> #: apt-get.8.xml:13 msgid "" @@ -3575,8 +3562,8 @@ msgstr "" "&apt-author.jgunthorpe; &apt-author.team; &apt-email; &apt-product; <date>08 " "Novembre 2008</date>" -#. type: Content of: <refentry><refnamediv><refname> -#: apt-get.8.xml:22 apt-get.8.xml:29 +#. type: <heading></heading> +#: apt-get.8.xml:22 apt-get.8.xml:29 guide.sgml:96 msgid "apt-get" msgstr "apt-get" @@ -3589,37 +3576,6 @@ msgstr "" #. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> #: apt-get.8.xml:36 -#| msgid "" -#| "<command>apt-get</command> <arg><option>-sqdyfmubV</option></arg> <arg> " -#| "<option>-o= <replaceable>config_string</replaceable> </option> </arg> " -#| "<arg> <option>-c= <replaceable>config_file</replaceable> </option> </arg> " -#| "<arg> <option>-t=</option> <group choice='req'> <arg choice='plain'> " -#| "<replaceable>target_release_name</replaceable> </arg> <arg " -#| "choice='plain'> <replaceable>target_release_number_expression</" -#| "replaceable> </arg> <arg choice='plain'> " -#| "<replaceable>target_release_codename</replaceable> </arg> </group> </arg> " -#| "<group choice=\"req\"> <arg choice='plain'>update</arg> <arg " -#| "choice='plain'>upgrade</arg> <arg choice='plain'>dselect-upgrade</arg> " -#| "<arg choice='plain'>dist-upgrade</arg> <arg choice='plain'>install <arg " -#| "choice=\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable> <arg> " -#| "<group choice='req'> <arg choice='plain'> " -#| "=<replaceable>pkg_version_number</replaceable> </arg> <arg " -#| "choice='plain'> /<replaceable>target_release_name</replaceable> </arg> " -#| "<arg choice='plain'> /<replaceable>target_release_codename</replaceable> " -#| "</arg> </group> </arg> </arg> </arg> <arg choice='plain'>remove <arg " -#| "choice=\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable></arg></" -#| "arg> <arg choice='plain'>purge <arg choice=\"plain\" rep=\"repeat" -#| "\"><replaceable>pkg</replaceable></arg></arg> <arg choice='plain'>source " -#| "<arg choice=\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable> <arg> " -#| "=<replaceable>pkg_version_number</replaceable> </arg> </arg> </arg> <arg " -#| "choice='plain'>build-dep <arg choice=\"plain\" rep=\"repeat" -#| "\"><replaceable>pkg</replaceable></arg></arg> <arg choice='plain'>check</" -#| "arg> <arg choice='plain'>clean</arg> <arg choice='plain'>autoclean</arg> " -#| "<arg choice='plain'>autoremove</arg> <arg choice='plain'> <group " -#| "choice='req'> <arg choice='plain'>-v</arg> <arg choice='plain'>--version</" -#| "arg> </group> </arg> <arg choice='plain'> <group choice='req'> <arg " -#| "choice='plain'>-h</arg> <arg choice='plain'>--help</arg> </group> </arg> " -#| "</group>" msgid "" "<command>apt-get</command> <arg><option>-sqdyfmubV</option></arg> <arg> " "<option>-o= <replaceable>config_string</replaceable> </option> </arg> <arg> " @@ -3726,8 +3682,8 @@ msgstr "" "progression d'ensemble peut être imprécis puisque la taille de ces fichiers " "ne peut être connue à l'avance." -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt-get.8.xml:147 +#. type: <tag></tag> +#: apt-get.8.xml:147 guide.sgml:121 msgid "upgrade" msgstr "upgrade" @@ -3780,8 +3736,8 @@ msgstr "" "état (par exemple, suppression d'anciens paquets, installation de nouveaux " "paquets)." -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt-get.8.xml:170 +#. type: <tag></tag> +#: apt-get.8.xml:170 guide.sgml:140 msgid "dist-upgrade" msgstr "dist-upgrade" @@ -3808,8 +3764,8 @@ msgstr "" "sources où récupérer les paquets désirés. Voyez aussi &apt-preferences; pour " "un mécanisme de remplacement des paramètres généraux pour certains paquets." -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt-get.8.xml:183 +#. type: <tag></tag> +#: apt-get.8.xml:183 guide.sgml:131 msgid "install" msgstr "install" @@ -3962,32 +3918,31 @@ msgstr "source" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-get.8.xml:251 +#, fuzzy #| msgid "" #| "<literal>source</literal> causes <command>apt-get</command> to fetch " #| "source packages. APT will examine the available packages to decide which " #| "source package to fetch. It will then find and download into the current " -#| "directory the newest available version of that source package. Source " -#| "packages are tracked separately from binary packages via <literal>deb-" -#| "src</literal> type lines in the &sources-list; file. This probably will " -#| "mean that you will not get the same source as the package you have " -#| "installed or as you could install. If the --compile options is specified " -#| "then the package will be compiled to a binary .deb using dpkg-" -#| "buildpackage, if --download-only is specified then the source package " -#| "will not be unpacked." +#| "directory the newest available version of that source package while " +#| "respect the default release, set with the option <literal>APT::Default-" +#| "Release</literal>, the <option>-t</option> option or per package with " +#| "with the <literal>pkg/release</literal> syntax, if possible." msgid "" "<literal>source</literal> causes <command>apt-get</command> to fetch source " "packages. APT will examine the available packages to decide which source " "package to fetch. It will then find and download into the current directory " "the newest available version of that source package while respect the " "default release, set with the option <literal>APT::Default-Release</" -"literal>, the <option>-t</option> option or per package with with the " +"literal>, the <option>-t</option> option or per package with the " "<literal>pkg/release</literal> syntax, if possible." msgstr "" "Avec la commande <literal>source</literal>, <command>apt-get</command> " "récupère des paquets sources. APT examine les paquets disponibles pour " "choisir le paquet source à récupérer. Il trouve ensuite et récupère dans le " -"répertoire courant leur version la plus récente par rapport à la version cible par défaut établie avec l'option <literal>APT::Default-Release</" -"literal>, l'option <option>-t</option> ou par paquet avec la syntaxe <literal>paquet/version</literal>, si possible." +"répertoire courant leur version la plus récente par rapport à la version " +"cible par défaut établie avec l'option <literal>APT::Default-Release</" +"literal>, l'option <option>-t</option> ou par paquet avec la syntaxe " +"<literal>paquet/version</literal>, si possible." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-get.8.xml:259 @@ -4920,7 +4875,8 @@ msgstr "<filename>/etc/apt/trusted.gpg</filename>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-key.8.xml:141 msgid "Keyring of local trusted keys, new keys will be added here." -msgstr "Trousseau de clés locales fiables : les nouvelles clés y seront ajoutées." +msgstr "" +"Trousseau de clés locales fiables : les nouvelles clés y seront ajoutées." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt-key.8.xml:144 @@ -4944,8 +4900,10 @@ msgstr "Trousseau des clés fiables de l'archive Debian." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt-key.8.xml:152 -msgid "<filename>/usr/share/keyrings/debian-archive-removed-keys.gpg</filename>" -msgstr "<filename>/usr/share/keyrings/debian-archive-removed-keys.gpg</filename>" +msgid "" +"<filename>/usr/share/keyrings/debian-archive-removed-keys.gpg</filename>" +msgstr "" +"<filename>/usr/share/keyrings/debian-archive-removed-keys.gpg</filename>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-key.8.xml:153 @@ -4957,7 +4915,7 @@ msgstr "Trousseau des clés fiables supprimées de l'archive Debian." msgid "&apt-get;, &apt-secure;" msgstr "&apt-get;, &apt-secure;" -#. The last update date +#. The last update date #. type: Content of: <refentry><refentryinfo> #: apt-mark.8.xml:13 #, fuzzy @@ -5088,7 +5046,8 @@ msgstr "" #: apt-mark.8.xml:93 #, fuzzy #| msgid "<option>-f=<filename>FILENAME</filename></option>" -msgid "<option>-f=<filename><replaceable>FILENAME</replaceable></filename></option>" +msgid "" +"<option>-f=<filename><replaceable>FILENAME</replaceable></filename></option>" msgstr "<option>-f=<filename>FICHIER</filename></option>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> @@ -5556,7 +5515,7 @@ msgstr "" "<command>apt-sortpkgs</command> retourne zéro si tout se passe bien ou 100 " "en cas d'erreur." -#. The last update date +#. The last update date #. type: Content of: <refentry><refentryinfo> #: apt.conf.5.xml:13 #, fuzzy @@ -6999,7 +6958,7 @@ msgstr "" #. TODO: provide a #. motivating example, except I haven't a clue why you'd want -#. to do this. +#. to do this. #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> #: apt.conf.5.xml:626 msgid "" @@ -7021,7 +6980,8 @@ msgstr "<literal>Debug::Acquire::cdrom</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml:645 -msgid "Print information related to accessing <literal>cdrom://</literal> sources." +msgid "" +"Print information related to accessing <literal>cdrom://</literal> sources." msgstr "" "Affiche les informations concernant les sources de type <literal>cdrom://</" "literal>" @@ -7034,7 +6994,8 @@ msgstr "<literal>Debug::Acquire::ftp</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml:656 msgid "Print information related to downloading packages using FTP." -msgstr "Affiche les informations concernant le téléchargement de paquets par FTP." +msgstr "" +"Affiche les informations concernant le téléchargement de paquets par FTP." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt.conf.5.xml:663 @@ -7044,7 +7005,8 @@ msgstr "<literal>Debug::Acquire::http</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml:667 msgid "Print information related to downloading packages using HTTP." -msgstr "Affiche les informations concernant le téléchargement de paquets par HTTP." +msgstr "" +"Affiche les informations concernant le téléchargement de paquets par HTTP." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt.conf.5.xml:674 @@ -7205,7 +7167,8 @@ msgstr "<literal>Debug::pkgAcquire::Worker</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml:796 -msgid "Log all interactions with the sub-processes that actually perform downloads." +msgid "" +"Log all interactions with the sub-processes that actually perform downloads." msgstr "" "Affiche toutes les interactions avec les processus enfants qui se chargent " "effectivement des téléchargements." @@ -7346,7 +7309,8 @@ msgstr "<literal>Debug::pkgPackageManager</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml:897 -msgid "Output status messages tracing the steps performed when invoking &dpkg;." +msgid "" +"Output status messages tracing the steps performed when invoking &dpkg;." msgstr "Affiche le détail des opérations liées à l'invocation de &dpkg;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> @@ -7419,13 +7383,13 @@ msgstr "" msgid "&file-aptconf;" msgstr "&apt-conf;" -#. ? reading apt.conf +#. ? reading apt.conf #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:975 msgid "&apt-cache;, &apt-config;, &apt-preferences;." msgstr "&apt-cache;, &apt-config;, &apt-preferences;." -#. The last update date +#. The last update date #. type: Content of: <refentry><refentryinfo> #: apt_preferences.5.xml:13 msgid "&apt-author.team; &apt-email; &apt-product; <date>04 May 2009</date>" @@ -7567,7 +7531,8 @@ msgstr "une priorité égale à 990" #. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> #: apt_preferences.5.xml:94 -msgid "to the versions that are not installed and belong to the target release." +msgid "" +"to the versions that are not installed and belong to the target release." msgstr "" "est affectée aux versions qui ne sont pas installées et qui appartiennent à " "la distribution par défaut." @@ -8052,7 +8017,8 @@ msgstr "" #. type: Content of: <refentry><refsect1><refsect2><title> #: apt_preferences.5.xml:306 msgid "Determination of Package Version and Distribution Properties" -msgstr "Détermination de la version des paquets et des propriétés des distributions" +msgstr "" +"Détermination de la version des paquets et des propriétés des distributions" #. type: Content of: <refentry><refsect1><refsect2><para> #: apt_preferences.5.xml:308 @@ -9091,6 +9057,1072 @@ msgstr "" msgid "&apt-cache; &apt-conf;" msgstr "&apt-cache; &apt-conf;" +#. type: <title> +#: guide.sgml:4 +msgid "APT User's Guide" +msgstr "" + +#. type: +#: guide.sgml:6 offline.sgml:6 +msgid "Jason Gunthorpe jgg@debian.org" +msgstr "" + +#. type: +#: guide.sgml:7 +msgid "$Id: guide.sgml,v 1.7 2003/04/26 23:26:13 doogie Exp $" +msgstr "" + +#. type: +#: guide.sgml:11 +msgid "" +"This document provides an overview of how to use the the APT package manager." +msgstr "" + +#. type: +#: guide.sgml:15 +msgid "Copyright © Jason Gunthorpe, 1998." +msgstr "" + +#. type:

+#: guide.sgml:21 offline.sgml:22 +msgid "" +"\"APT\" and this document are free software; you can redistribute them and/" +"or modify them under the terms of the GNU General Public License as " +"published by the Free Software Foundation; either version 2 of the License, " +"or (at your option) any later version." +msgstr "" + +#. type:

+#: guide.sgml:24 offline.sgml:25 +msgid "" +"For more details, on Debian GNU/Linux systems, see the file /usr/share/" +"common-licenses/GPL for the full license." +msgstr "" + +#. type: +#: guide.sgml:32 +#, fuzzy +#| msgid "generate" +msgid "General" +msgstr "generate" + +#. type:

+#: guide.sgml:38 +msgid "" +"The APT package currently contains two sections, the APT dselect method and the apt-get command line user interface. Both " +"provide a way to install and remove packages as well as download new " +"packages from the Internet." +msgstr "" + +#. type: +#: guide.sgml:39 +msgid "Anatomy of the Package System" +msgstr "" + +#. type:

+#: guide.sgml:44 +msgid "" +"The Debian packaging system has a large amount of information associated " +"with each package to help assure that it integrates cleanly and easily into " +"the system. The most prominent of its features is the dependency system." +msgstr "" + +#. type:

+#: guide.sgml:52 +msgid "" +"The dependency system allows individual programs to make use of shared " +"elements in the system such as libraries. It simplifies placing infrequently " +"used portions of a program in separate packages to reduce the number of " +"things the average user is required to install. Also, it allows for choices " +"in mail transport agents, X servers and so on." +msgstr "" + +#. type:

+#: guide.sgml:57 +msgid "" +"The first step to understanding the dependency system is to grasp the " +"concept of a simple dependency. The meaning of a simple dependency is that a " +"package requires another package to be installed at the same time to work " +"properly." +msgstr "" + +#. type:

+#: guide.sgml:63 +msgid "" +"For instance, mailcrypt is an emacs extension that aids in encrypting email " +"with GPG. Without GPGP installed mail-crypt is useless, so mailcrypt has a " +"simple dependency on GPG. Also, because it is an emacs extension it has a " +"simple dependency on emacs, without emacs it is completely useless." +msgstr "" + +#. type:

+#: guide.sgml:73 +msgid "" +"The other important dependency to understand is a conflicting dependency. It " +"means that a package, when installed with another package, will not work and " +"may possibly be extremely harmful to the system. As an example consider a " +"mail transport agent such as sendmail, exim or qmail. It is not possible to " +"have two mail transport agents installed because both need to listen to the " +"network to receive mail. Attempting to install two will seriously damage the " +"system so all mail transport agents have a conflicting dependency with all " +"other mail transport agents." +msgstr "" + +#. type:

+#: guide.sgml:83 +msgid "" +"As an added complication there is the possibility for a package to pretend " +"to be another package. Consider that exim and sendmail for many intents are " +"identical, they both deliver mail and understand a common interface. Hence, " +"the package system has a way for them to declare that they are both mail-" +"transport-agents. So, exim and sendmail both declare that they provide a " +"mail-transport-agent and other packages that need a mail transport agent " +"depend on mail-transport-agent. This can add a great deal of confusion when " +"trying to manually fix packages." +msgstr "" + +#. type:

+#: guide.sgml:88 +msgid "" +"At any given time a single dependency may be met by packages that are " +"already installed or it may not be. APT attempts to help resolve dependency " +"issues by providing a number of automatic algorithms that help in selecting " +"packages for installation." +msgstr "" + +#. type:

+#: guide.sgml:102 +msgid "" +"apt-get provides a simple way to install packages from the " +"command line. Unlike dpkg, apt-get does not " +"understand .deb files, it works with the package's proper name and can only " +"install .deb archives from a Source." +msgstr "" + +#. type:

+#: guide.sgml:109 +msgid "" +"The first

If you are using an http proxy server you must set " +"the http_proxy environment variable first, see sources.list(5)

thing that should be done before using apt-get is to " +"fetch the package lists from the Sources so that it knows what " +"packages are available. This is done with apt-get update. For " +"instance," +msgstr "" + +#. type: +#: guide.sgml:116 +#, no-wrap +msgid "" +"# apt-get update\n" +"Get http://ftp.de.debian.org/debian-non-US/ stable/binary-i386/ Packages\n" +"Get http://llug.sep.bnl.gov/debian/ testing/contrib Packages\n" +"Reading Package Lists... Done\n" +"Building Dependency Tree... Done" +msgstr "" + +#. type:

+#: guide.sgml:120 +msgid "Once updated there are several commands that can be used:" +msgstr "" + +#. type:

+#: guide.sgml:131 +msgid "" +"Upgrade will attempt to gently upgrade the whole system. Upgrade will never " +"install a new package or remove an existing package, nor will it ever " +"upgrade a package that might cause some other package to break. This can be " +"used daily to relatively safely upgrade the system. Upgrade will list all of " +"the packages that it could not upgrade, this usually means that they depend " +"on new packages or conflict with some other package. dselect or " +"apt-get install can be used to force these packages to install." +msgstr "" + +#. type:

+#: guide.sgml:140 +msgid "" +"Install is used to install packages by name. The package is automatically " +"fetched and installed. This can be useful if you already know the name of " +"the package to install and do not want to go into a GUI to select it. Any " +"number of packages may be passed to install, they will all be fetched. " +"Install automatically attempts to resolve dependency problems with the " +"listed packages and will print a summary and ask for confirmation if " +"anything other than its arguments are changed." +msgstr "" + +#. type:

+#: guide.sgml:149 +msgid "" +"Dist-upgrade is a complete upgrader designed to simplify upgrading between " +"releases of Debian. It uses a sophisticated algorithm to determine the best " +"set of packages to install, upgrade and remove to get as much of the system " +"to the newest release. In some situations it may be desired to use dist-" +"upgrade rather than spend the time manually resolving dependencies in " +"dselect. Once dist-upgrade has completed then dselect can be used to install any packages that may have been left out." +msgstr "" + +#. type:

+#: guide.sgml:152 +msgid "" +"It is important to closely look at what dist-upgrade is going to do, its " +"decisions may sometimes be quite surprising." +msgstr "" + +#. type:

+#: guide.sgml:163 +msgid "" +"apt-get has several command line options that are detailed in " +"its man page, . The most useful " +"option is -d which does not install the fetched files. If the " +"system has to download a large number of package it would be undesired to " +"start installing them in case something goes wrong. When -d is used " +"the downloaded archives can be installed by simply running the command that " +"caused them to be downloaded again without -d." +msgstr "" + +#. type: +#: guide.sgml:168 +#, fuzzy +#| msgid "APT in DSelect" +msgid "DSelect" +msgstr "APT et DSelect" + +#. type:

+#: guide.sgml:173 +msgid "" +"The APT dselect method provides the complete APT system with " +"the dselect package selection GUI. dselect is used " +"to select the packages to be installed or removed and APT actually installs " +"them." +msgstr "" + +#. type:

+#: guide.sgml:184 +msgid "" +"To enable the APT method you need to to select [A]ccess in dselect and then choose the APT method. You will be prompted for a set of " +"Sources which are places to fetch archives from. These can be " +"remote Internet sites, local Debian mirrors or CDROMs. Each source can " +"provide a fragment of the total Debian archive, APT will automatically " +"combine them to form a complete set of packages. If you have a CDROM then it " +"is a good idea to specify it first and then specify a mirror so that you " +"have access to the latest bug fixes. APT will automatically use packages on " +"your CDROM before downloading from the Internet." +msgstr "" + +#. type: +#: guide.sgml:198 +#, no-wrap +msgid "" +" Set up a list of distribution source locations\n" +"\t \n" +" Please give the base URL of the debian distribution.\n" +" The access schemes I know about are: http file\n" +"\t \n" +" For example:\n" +" file:/mnt/debian,\n" +" ftp://ftp.debian.org/debian,\n" +" http://ftp.de.debian.org/debian,\n" +" \n" +" \n" +" URL [http://llug.sep.bnl.gov/debian]:" +msgstr "" + +#. type:

+#: guide.sgml:205 +msgid "" +"The Sources setup starts by asking for the base of the Debian " +"archive, defaulting to a HTTP mirror. Next it asks for the distribution to " +"get." +msgstr "" + +#. type: +#: guide.sgml:212 +#, no-wrap +msgid "" +" Please give the distribution tag to get or a path to the\n" +" package file ending in a /. The distribution\n" +" tags are typically something like: stable unstable testing non-US\n" +" \n" +" Distribution [stable]:" +msgstr "" + +#. type:

+#: guide.sgml:222 +msgid "" +"The distribution refers to the Debian version in the archive, stable refers to the latest released version and unstable refers to " +"the developmental version. non-US is only available on some mirrors " +"and refers to packages that contain encryption technology or other things " +"that cannot be exported from the United States. Importing these packages " +"into the US is legal however." +msgstr "" + +#. type: +#: guide.sgml:228 +#, no-wrap +msgid "" +" Please give the components to get\n" +" The components are typically something like: main contrib non-free\n" +" \n" +" Components [main contrib non-free]:" +msgstr "" + +#. type:

+#: guide.sgml:236 +msgid "" +"The components list refers to the list of sub distributions to fetch. The " +"distribution is split up based on software licenses, main being DFSG free " +"packages while contrib and non-free contain things that have various " +"restrictions placed on their use and distribution." +msgstr "" + +#. type:

+#: guide.sgml:240 +msgid "" +"Any number of sources can be added, the setup script will continue to prompt " +"until you have specified all that you want." +msgstr "" + +#. type:

+#: guide.sgml:247 +msgid "" +"Before starting to use dselect it is necessary to update the " +"available list by selecting [U]pdate from the menu. This is a super-set of " +"apt-get update that makes the fetched information available to " +"dselect. [U]pdate must be performed even if apt-get update has been run before." +msgstr "" + +#. type:

+#: guide.sgml:253 +msgid "" +"You can then go on and make your selections using [S]elect and then perform " +"the installation using [I]nstall. When using the APT method the [C]onfig and " +"[R]emove commands have no meaning, the [I]nstall command performs both of " +"them together." +msgstr "" + +#. type:

+#: guide.sgml:258 +msgid "" +"By default APT will automatically remove the package (.deb) files once they " +"have been successfully installed. To change this behavior place Dselect::" +"clean \"prompt\"; in /etc/apt/apt.conf." +msgstr "" + +#. type: +#: guide.sgml:264 +msgid "The Interface" +msgstr "" + +#. type:

+#: guide.sgml:278 +msgid "" +"Both that APT dselect method and apt-get share the " +"same interface. It is a simple system that generally tells you what it will " +"do and then goes and does it.

The dselect method " +"actually is a set of wrapper scripts to apt-get. The method " +"actually provides more functionality than is present in apt-get " +"alone.

 After printing out a summary of what will happen APT " +"then will print out some informative status messages so that you can " +"estimate how far along it is and how much is left to do." +msgstr "" + +#. type: +#: guide.sgml:280 +msgid "Startup" +msgstr "" + +#. type:

+#: guide.sgml:284 +msgid "" +"Before all operations except update, APT performs a number of actions to " +"prepare its internal state. It also does some checks of the system's state. " +"At any time these operations can be performed by running apt-get check." +msgstr "" + +#. type: +#: guide.sgml:289 +#, no-wrap +msgid "" +"# apt-get check\n" +"Reading Package Lists... Done\n" +"Building Dependency Tree... Done" +msgstr "" + +#. type:

+#: guide.sgml:297 +msgid "" +"The first thing it does is read all the package files into memory. APT uses " +"a caching scheme so this operation will be faster the second time it is run. " +"If some of the package files are not found then they will be ignored and a " +"warning will be printed when apt-get exits." +msgstr "" + +#. type:

+#: guide.sgml:303 +msgid "" +"The final operation performs a detailed analysis of the system's " +"dependencies. It checks every dependency of every installed or unpacked " +"package and considers if it is OK. Should this find a problem then a report " +"will be printed out and apt-get will refuse to run." +msgstr "" + +#. type: +#: guide.sgml:320 +#, no-wrap +msgid "" +"# apt-get check\n" +"Reading Package Lists... Done\n" +"Building Dependency Tree... Done\n" +"You might want to run apt-get -f install' to correct these.\n" +"Sorry, but the following packages have unmet dependencies:\n" +" 9fonts: Depends: xlib6g but it is not installed\n" +" uucp: Depends: mailx but it is not installed\n" +" blast: Depends: xlib6g (>= 3.3-5) but it is not installed\n" +" adduser: Depends: perl-base but it is not installed\n" +" aumix: Depends: libgpmg1 but it is not installed\n" +" debiandoc-sgml: Depends: sgml-base but it is not installed\n" +" bash-builtins: Depends: bash (>= 2.01) but 2.0-3 is installed\n" +" cthugha: Depends: svgalibg1 but it is not installed\n" +" Depends: xlib6g (>= 3.3-5) but it is not installed\n" +" libreadlineg2: Conflicts:libreadline2 (<< 2.1-2.1)" +msgstr "" + +#. type:

+#: guide.sgml:329 +msgid "" +"In this example the system has many problems, including a serious problem " +"with libreadlineg2. For each package that has unmet dependencies a line is " +"printed out indicating the package with the problem and the dependencies " +"that are unmet. A short explanation of why the package has a dependency " +"problem is also included." +msgstr "" + +#. type:

+#: guide.sgml:337 +msgid "" +"There are two ways a system can get into a broken state like this. The first " +"is caused by dpkg missing some subtle relationships between " +"packages when performing upgrades.

APT however considers all " +"known dependencies and attempts to prevent broken packages

. " +"The second is if a package installation fails during an operation. In this " +"situation a package may have been unpacked without its dependents being " +"installed." +msgstr "" + +#. type:

+#: guide.sgml:345 +msgid "" +"The second situation is much less serious than the first because APT places " +"certain constraints on the order that packages are installed. In both cases " +"supplying the -f option to apt-get will cause APT to " +"deduce a possible solution to the problem and then continue on. The APT " +"dselect method always supplies the -f option to allow " +"for easy continuation of failed maintainer scripts." +msgstr "" + +#. type:

+#: guide.sgml:351 +msgid "" +"However, if the -f option is used to correct a seriously broken " +"system caused by the first case then it is possible that it will either fail " +"immediately or the installation sequence will fail. In either case it is " +"necessary to manually use dpkg (possibly with forcing options) to correct " +"the situation enough to allow APT to proceed." +msgstr "" + +#. type: +#: guide.sgml:356 +msgid "The Status Report" +msgstr "" + +#. type:

+#: guide.sgml:363 +msgid "" +"Before proceeding apt-get will present a report on what will " +"happen. Generally the report reflects the type of operation being performed " +"but there are several common elements. In all cases the lists reflect the " +"final state of things, taking into account the -f option and any " +"other relevant activities to the command being executed." +msgstr "" + +#. type: +#: guide.sgml:364 +msgid "The Extra Package list" +msgstr "" + +#. type: +#: guide.sgml:372 +#, no-wrap +msgid "" +"The following extra packages will be installed:\n" +" libdbd-mysql-perl xlib6 zlib1 xzx libreadline2 libdbd-msql-perl\n" +" mailpgp xdpkg fileutils pinepgp zlib1g xlib6g perl-base\n" +" bin86 libgdbm1 libgdbmg1 quake-lib gmp2 bcc xbuffy\n" +" squake pgp-i python-base debmake ldso perl libreadlineg2\n" +" ssh" +msgstr "" + +#. type:

+#: guide.sgml:379 +msgid "" +"The Extra Package list shows all of the packages that will be installed or " +"upgraded in excess of the ones mentioned on the command line. It is only " +"generated for an install command. The listed packages are often the " +"result of an Auto Install." +msgstr "" + +#. type: +#: guide.sgml:382 +msgid "The Packages to Remove" +msgstr "" + +#. type: +#: guide.sgml:389 +#, no-wrap +msgid "" +"The following packages will be REMOVED:\n" +" xlib6-dev xpat2 tk40-dev xkeycaps xbattle xonix\n" +" xdaliclock tk40 tk41 xforms0.86 ghostview xloadimage xcolorsel\n" +" xadmin xboard perl-debug tkined xtetris libreadline2-dev perl-suid\n" +" nas xpilot xfig" +msgstr "" + +#. type:

+#: guide.sgml:399 +msgid "" +"The Packages to Remove list shows all of the packages that will be removed " +"from the system. It can be shown for any of the operations and should be " +"given a careful inspection to ensure nothing important is to be taken off. " +"The -f option is especially good at generating packages to remove " +"so extreme care should be used in that case. The list may contain packages " +"that are going to be removed because they are only partially installed, " +"possibly due to an aborted installation." +msgstr "" + +#. type: +#: guide.sgml:402 +msgid "The New Packages list" +msgstr "" + +#. type: +#: guide.sgml:406 +#, no-wrap +msgid "" +"The following NEW packages will installed:\n" +" zlib1g xlib6g perl-base libgdbmg1 quake-lib gmp2 pgp-i python-base" +msgstr "" + +#. type:

+#: guide.sgml:411 +msgid "" +"The New Packages list is simply a reminder of what will happen. The packages " +"listed are not presently installed in the system but will be when APT is " +"done." +msgstr "" + +#. type: +#: guide.sgml:414 +msgid "The Kept Back list" +msgstr "" + +#. type: +#: guide.sgml:419 +#, no-wrap +msgid "" +"The following packages have been kept back\n" +" compface man-db tetex-base msql libpaper svgalib1\n" +" gs snmp arena lynx xpat2 groff xscreensaver" +msgstr "" + +#. type:

+#: guide.sgml:428 +msgid "" +"Whenever the whole system is being upgraded there is the possibility that " +"new versions of packages cannot be installed because they require new things " +"or conflict with already installed things. In this case the package will " +"appear in the Kept Back list. The best way to convince packages listed there " +"to install is with apt-get install or by using dselect " +"to resolve their problems." +msgstr "" + +#. type: +#: guide.sgml:431 +msgid "Held Packages warning" +msgstr "" + +#. type: +#: guide.sgml:435 +#, no-wrap +msgid "" +"The following held packages will be changed:\n" +" cvs" +msgstr "" + +#. type:

+#: guide.sgml:441 +msgid "" +"Sometimes you can ask APT to install a package that is on hold, in such a " +"case it prints out a warning that the held package is going to be changed. " +"This should only happen during dist-upgrade or install." +msgstr "" + +#. type: +#: guide.sgml:444 +msgid "Final summary" +msgstr "" + +#. type:

+#: guide.sgml:447 +msgid "" +"Finally, APT will print out a summary of all the changes that will occur." +msgstr "" + +#. type: +#: guide.sgml:452 +#, no-wrap +msgid "" +"206 packages upgraded, 8 newly installed, 23 to remove and 51 not upgraded.\n" +"12 packages not fully installed or removed.\n" +"Need to get 65.7M/66.7M of archives. After unpacking 26.5M will be used." +msgstr "" + +#. type:

+#: guide.sgml:470 +msgid "" +"The first line of the summary simply is a reduced version of all of the " +"lists and includes the number of upgrades - that is packages already " +"installed that have new versions available. The second line indicates the " +"number of poorly configured packages, possibly the result of an aborted " +"installation. The final line shows the space requirements that the " +"installation needs. The first pair of numbers refer to the size of the " +"archive files. The first number indicates the number of bytes that must be " +"fetched from remote locations and the second indicates the total size of all " +"the archives required. The next number indicates the size difference between " +"the presently installed packages and the newly installed packages. It is " +"roughly equivalent to the space required in /usr after everything is done. " +"If a large number of packages are being removed then the value may indicate " +"the amount of space that will be freed." +msgstr "" + +#. type:

+#: guide.sgml:473 +msgid "" +"Some other reports can be generated by using the -u option to show packages " +"to upgrade, they are similar to the previous examples." +msgstr "" + +#. type: +#: guide.sgml:477 +msgid "The Status Display" +msgstr "" + +#. type:

+#: guide.sgml:481 +msgid "" +"During the download of archives and package files APT prints out a series of " +"status messages." +msgstr "" + +#. type: +#: guide.sgml:490 +#, no-wrap +msgid "" +"# apt-get update\n" +"Get:1 http://ftp.de.debian.org/debian-non-US/ stable/non-US/ Packages\n" +"Get:2 http://llug.sep.bnl.gov/debian/ testing/contrib Packages\n" +"Hit http://llug.sep.bnl.gov/debian/ testing/main Packages\n" +"Get:4 http://ftp.de.debian.org/debian-non-US/ unstable/binary-i386/ Packages\n" +"Get:5 http://llug.sep.bnl.gov/debian/ testing/non-free Packages\n" +"11% [5 testing/non-free `Waiting for file' 0/32.1k 0%] 2203b/s 1m52s" +msgstr "" + +#. type:

+#: guide.sgml:500 +msgid "" +"The lines starting with Get are printed out when APT begins to " +"fetch a file while the last line indicates the progress of the download. The " +"first percent value on the progress line indicates the total percent done of " +"all files. Unfortunately since the size of the Package files is unknown " +"apt-get update estimates the percent done which causes some " +"inaccuracies." +msgstr "" + +#. type:

+#: guide.sgml:509 +msgid "" +"The next section of the status line is repeated once for each download " +"thread and indicates the operation being performed and some useful " +"information about what is happening. Sometimes this section will simply read " +"Forking which means the OS is loading the download module. The " +"first word after the [ is the fetch number as shown on the history lines. " +"The next word is the short form name of the object being downloaded. For " +"archives it will contain the name of the package that is being fetched." +msgstr "" + +#. type:

+#: guide.sgml:524 +msgid "" +"Inside of the single quote is an informative string indicating the progress " +"of the negotiation phase of the download. Typically it progresses from " +"Connecting to Waiting for file to Downloading or " +"Resuming. The final value is the number of bytes downloaded from " +"the remote site. Once the download begins this is represented as " +"102/10.2k indicating that 102 bytes have been fetched and 10.2 " +"kilobytes is expected. The total size is always shown in 4 figure notation " +"to preserve space. After the size display is a percent meter for the file " +"itself. The second last element is the instantaneous average speed. This " +"values is updated every 5 seconds and reflects the rate of data transfer for " +"that period. Finally is shown the estimated transfer time. This is updated " +"regularly and reflects the time to complete everything at the shown transfer " +"rate." +msgstr "" + +#. type:

+#: guide.sgml:530 +msgid "" +"The status display updates every half second to provide a constant feedback " +"on the download progress while the Get lines scroll back whenever a new file " +"is started. Since the status display is constantly updated it is unsuitable " +"for logging to a file, use the -q option to remove the status " +"display." +msgstr "" + +#. type: +#: guide.sgml:535 +msgid "Dpkg" +msgstr "" + +#. type:

+#: guide.sgml:542 +msgid "" +"APT uses dpkg for installing the archives and will switch over " +"to the dpkg interface once downloading is completed. " +"dpkg will also ask a number of questions as it processes the " +"packages and the packages themselves may also ask several questions. Before " +"each question there is usually a description of what it is asking and the " +"questions are too varied to discuss completely here." +msgstr "" + +#. type: +#: offline.sgml:4 +msgid "Using APT Offline" +msgstr "" + +#. type: +#: offline.sgml:7 +msgid "$Id: offline.sgml,v 1.8 2003/02/12 15:06:41 doogie Exp $" +msgstr "" + +#. type: +#: offline.sgml:12 +msgid "" +"This document describes how to use APT in a non-networked environment, " +"specifically a 'sneaker-net' approach for performing upgrades." +msgstr "" + +#. type: +#: offline.sgml:16 +msgid "Copyright © Jason Gunthorpe, 1999." +msgstr "" + +#. type: +#: offline.sgml:32 +msgid "Introduction" +msgstr "" + +#. type: +#: offline.sgml:34 offline.sgml:65 offline.sgml:180 +#, fuzzy +#| msgid "OverrideDir" +msgid "Overview" +msgstr "OverrideDir" + +#. type:

+#: offline.sgml:40 +msgid "" +"Normally APT requires direct access to a Debian archive, either from a local " +"media or through a network. Another common complaint is that a Debian " +"machine is on a slow link, such as a modem and another machine has a very " +"fast connection but they are physically distant." +msgstr "" + +#. type:

+#: offline.sgml:51 +msgid "" +"The solution to this is to use large removable media such as a Zip disc or a " +"SuperDisk disc. These discs are not large enough to store the entire Debian " +"archive but can easily fit a subset large enough for most users. The idea is " +"to use APT to generate a list of packages that are required and then fetch " +"them onto the disc using another machine with good connectivity. It is even " +"possible to use another Debian machine with APT or to use a completely " +"different OS and a download tool like wget. Let remote host mean " +"the machine downloading the packages, and target host the one with " +"bad or no connection." +msgstr "" + +#. type:

+#: offline.sgml:57 +msgid "" +"This is achieved by creatively manipulating the APT configuration file. The " +"essential premis to tell APT to look on a disc for it's archive files. Note " +"that the disc should be formated with a filesystem that can handle long file " +"names such as ext2, fat32 or vfat." +msgstr "" + +#. type: +#: offline.sgml:63 +msgid "Using APT on both machines" +msgstr "" + +#. type:

+#: offline.sgml:71 +msgid "" +"APT being available on both machines gives the simplest configuration. The " +"basic idea is to place a copy of the status file on the disc and use the " +"remote machine to fetch the latest package files and decide which packages " +"to download. The disk directory structure should look like:" +msgstr "" + +#. type: +#: offline.sgml:80 +#, no-wrap +msgid "" +" /disc/\n" +" archives/\n" +" partial/\n" +" lists/\n" +" partial/\n" +" status\n" +" sources.list\n" +" apt.conf" +msgstr "" + +#. type: +#: offline.sgml:88 +#, fuzzy +#| msgid "User configuration" +msgid "The configuration file" +msgstr "Configuration utilisateur" + +#. type:

+#: offline.sgml:96 +msgid "" +"The configuration file should tell APT to store its files on the disc and to " +"use the configuration files on the disc as well. The sources.list should " +"contain the proper sites that you wish to use from the remote machine, and " +"the status file should be a copy of /var/lib/dpkg/status from the " +"target host. Please note, if you are using a local archive you must " +"use copy URIs, the syntax is identical to file URIs." +msgstr "" + +#. type:

+#: offline.sgml:100 +msgid "" +"apt.conf must contain the necessary information to make APT use the " +"disc:" +msgstr "" + +#. type: +#: offline.sgml:124 +#, no-wrap +msgid "" +" APT\n" +" {\n" +" /* This is not necessary if the two machines are the same arch, it tells\n" +" the remote APT what architecture the target machine is */\n" +" Architecture \"i386\";\n" +" \n" +" Get::Download-Only \"true\";\n" +" };\n" +" \n" +" Dir\n" +" {\n" +" /* Use the disc for state information and redirect the status file from\n" +" the /var/lib/dpkg default */\n" +" State \"/disc/\";\n" +" State::status \"status\";\n" +"\n" +" // Binary caches will be stored locally\n" +" Cache::archives \"/disc/archives/\";\n" +" Cache \"/tmp/\";\n" +" \n" +" // Location of the source list.\n" +" Etc \"/disc/\";\n" +" };" +msgstr "" + +#. type:

+#: offline.sgml:129 +msgid "" +"More details can be seen by examining the apt.conf man page and the sample " +"configuration file in /usr/share/doc/apt/examples/apt.conf." +msgstr "" + +#. type:

+#: offline.sgml:136 +msgid "" +"On the target machine the first thing to do is mount the disc and copy /" +"var/lib/dpkg/status to it. You will also need to create the directories " +"outlined in the Overview, archives/partial/ and lists/partial/ Then take the disc to the remote machine and configure the sources.list. " +"On the remote machine execute the following:" +msgstr "" + +#. type: +#: offline.sgml:142 +#, no-wrap +msgid "" +" # export APT_CONFIG=\"/disc/apt.conf\"\n" +" # apt-get update\n" +" [ APT fetches the package files ]\n" +" # apt-get dist-upgrade\n" +" [ APT fetches all the packages needed to upgrade the target machine ]" +msgstr "" + +#. type:

+#: offline.sgml:149 +msgid "" +"The dist-upgrade command can be replaced with any-other standard APT " +"commands, particularly dselect-upgrade. You can even use an APT front end " +"such as dselect However this presents a problem in communicating " +"your selections back to the local computer." +msgstr "" + +#. type:

+#: offline.sgml:153 +msgid "" +"Now the disc contains all of the index files and archives needed to upgrade " +"the target machine. Take the disc back and run:" +msgstr "" + +#. type: +#: offline.sgml:159 +#, no-wrap +msgid "" +" # export APT_CONFIG=\"/disc/apt.conf\"\n" +" # apt-get check\n" +" [ APT generates a local copy of the cache files ]\n" +" # apt-get --no-d -o dir::state::status=/var/lib/dpkg/status dist-upgrade\n" +" [ Or any other APT command ]" +msgstr "" + +#. type:

+#: offline.sgml:165 +msgid "" +"It is necessary for proper function to re-specify the status file to be the " +"local one. This is very important!" +msgstr "" + +#. type:

+#: offline.sgml:172 +msgid "" +"If you are using dselect you can do the very risky operation of copying disc/" +"status to /var/lib/dpkg/status so that any selections you made on the remote " +"machine are updated. I highly recommend that people only make selections on " +"the local machine - but this may not always be possible. DO NOT copy the " +"status file if dpkg or APT have been run in the mean time!!" +msgstr "" + +#. type: +#: offline.sgml:178 +msgid "Using APT and wget" +msgstr "" + +#. type:

+#: offline.sgml:185 +msgid "" +"wget is a popular and portable download tool that can run on nearly " +"any machine. Unlike the method above this requires that the Debian machine " +"already has a list of available packages." +msgstr "" + +#. type:

+#: offline.sgml:190 +msgid "" +"The basic idea is to create a disc that has only the archive files " +"downloaded from the remote site. This is done by using the --print-uris " +"option to apt-get and then preparing a wget script to actually fetch the " +"packages." +msgstr "" + +#. type: +#: offline.sgml:196 +#, fuzzy +#| msgid "Options" +msgid "Operation" +msgstr "Options" + +#. type:

+#: offline.sgml:200 +msgid "" +"Unlike the previous technique no special configuration files are required. " +"We merely use the standard APT commands to generate the file list." +msgstr "" + +#. type: +#: offline.sgml:205 +#, no-wrap +msgid "" +" # apt-get dist-upgrade \n" +" [ Press no when prompted, make sure you are happy with the actions ]\n" +" # apt-get -qq --print-uris dist-upgrade > uris\n" +" # awk '{print \"wget -O \" $2 \" \" $1}' < uris > /disc/wget-script" +msgstr "" + +#. type:

+#: offline.sgml:210 +msgid "" +"Any command other than dist-upgrade could be used here, including dselect-" +"upgrade." +msgstr "" + +#. type:

+#: offline.sgml:216 +msgid "" +"The /disc/wget-script file will now contain a list of wget commands to " +"execute in order to fetch the necessary archives. This script should be run " +"with the current directory as the disc's mount point so as to save the " +"output on the disc." +msgstr "" + +#. type:

+#: offline.sgml:219 +msgid "The remote machine would do something like" +msgstr "" + +#. type: +#: offline.sgml:223 +#, no-wrap +msgid "" +" # cd /disc\n" +" # sh -x ./wget-script\n" +" [ wait.. ]" +msgstr "" + +#. type: +#: offline.sgml:228 +msgid "" +"Once the archives are downloaded and the disc returned to the Debian machine " +"installation can proceed using," +msgstr "" + +#. type: +#: offline.sgml:230 +#, no-wrap +msgid " # apt-get -o dir::cache::archives=\"/disc/\" dist-upgrade" +msgstr "" + +#. type:

+#: offline.sgml:234 +msgid "Which will use the already fetched archives on the disc." +msgstr "" + #~ msgid "/etc/apt/sources.list" #~ msgstr "/etc/apt/sources.list" diff --git a/doc/po/ja.po b/doc/po/ja.po index ca5ccef2b..0cceb0909 100644 --- a/doc/po/ja.po +++ b/doc/po/ja.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2009-09-26 11:35+0300\n" +"POT-Creation-Date: 2009-10-01 18:09+0300\n" "PO-Revision-Date: 2009-07-30 22:55+0900\n" "Last-Translator: KURASAWA Nozomu \n" "Language-Team: LANGUAGE \n" @@ -1579,7 +1579,7 @@ msgstr "" #. type: Content of: #: apt-cache.8.xml:234 msgid "" -"Note that a package which APT knows of is not nessasarily available to " +"Note that a package which APT knows of is not necessarily available to " "download, installable or installed, e.g. virtual packages are also listed in " "the generated list." msgstr "" @@ -3708,8 +3708,8 @@ msgstr "" "November 2008" # type: Content of: -#. type: Content of: -#: apt-get.8.xml:22 apt-get.8.xml:29 +#. type: +#: apt-get.8.xml:22 apt-get.8.xml:29 guide.sgml:96 msgid "apt-get" msgstr "apt-get" @@ -3858,8 +3858,8 @@ msgstr "" "ã®ã‚µã‚¤ã‚ºã‚’知るã“ã¨ãŒã§ããªã„ãŸã‚ã€å…¨ä½“ã®é€²æ—メータã¯æ­£ã—ã表示ã•ã‚Œã¾ã›ã‚“。" # type: -#. type: Content of: -#: apt-get.8.xml:147 +#. type: +#: apt-get.8.xml:147 guide.sgml:121 msgid "upgrade" msgstr "upgrade" @@ -3912,8 +3912,8 @@ msgstr "" "ã©)" # type: -#. type: Content of: -#: apt-get.8.xml:170 +#. type: +#: apt-get.8.xml:170 guide.sgml:140 msgid "dist-upgrade" msgstr "dist-upgrade" @@ -3942,8 +3942,8 @@ msgstr "" "ã•ã„。" # type: -#. type: Content of: -#: apt-get.8.xml:183 +#. type: +#: apt-get.8.xml:183 guide.sgml:131 msgid "install" msgstr "install" @@ -4107,7 +4107,7 @@ msgid "" "package to fetch. It will then find and download into the current directory " "the newest available version of that source package while respect the " "default release, set with the option APT::Default-Release, the option or per package with with the " +"literal>, the option or per package with the " "pkg/release syntax, if possible." msgstr "" "source ã¯ã€ã‚½ãƒ¼ã‚¹ãƒ‘ッケージをå–å¾—ã™ã‚‹ã®ã« apt-" @@ -9292,6 +9292,1138 @@ msgstr "" msgid "&apt-cache; &apt-conf;" msgstr "&apt-cache; &apt-conf;" +#. type: +#: guide.sgml:4 +msgid "APT User's Guide" +msgstr "" + +# type: +#. type: +#: guide.sgml:6 offline.sgml:6 +msgid "Jason Gunthorpe jgg@debian.org" +msgstr "Jason Gunthorpe jgg@debian.org" + +#. type: +#: guide.sgml:7 +msgid "$Id: guide.sgml,v 1.7 2003/04/26 23:26:13 doogie Exp $" +msgstr "" + +#. type: +#: guide.sgml:11 +msgid "" +"This document provides an overview of how to use the the APT package manager." +msgstr "" + +# type: +#. type: +#: guide.sgml:15 +#, fuzzy +msgid "Copyright © Jason Gunthorpe, 1998." +msgstr "Copyright © Jason Gunthorpe, 1999." + +#. type:

+#: guide.sgml:21 offline.sgml:22 +msgid "" +"\"APT\" and this document are free software; you can redistribute them and/" +"or modify them under the terms of the GNU General Public License as " +"published by the Free Software Foundation; either version 2 of the License, " +"or (at your option) any later version." +msgstr "" + +#. type:

+#: guide.sgml:24 offline.sgml:25 +msgid "" +"For more details, on Debian GNU/Linux systems, see the file /usr/share/" +"common-licenses/GPL for the full license." +msgstr "" + +#. type: +#: guide.sgml:32 +#, fuzzy +msgid "General" +msgstr "generate" + +#. type:

+#: guide.sgml:38 +msgid "" +"The APT package currently contains two sections, the APT dselect method and the apt-get command line user interface. Both " +"provide a way to install and remove packages as well as download new " +"packages from the Internet." +msgstr "" + +# type: Content of: +#. type: +#: guide.sgml:39 +#, fuzzy +msgid "Anatomy of the Package System" +msgstr "パッケージå" + +#. type:

+#: guide.sgml:44 +msgid "" +"The Debian packaging system has a large amount of information associated " +"with each package to help assure that it integrates cleanly and easily into " +"the system. The most prominent of its features is the dependency system." +msgstr "" + +#. type:

+#: guide.sgml:52 +msgid "" +"The dependency system allows individual programs to make use of shared " +"elements in the system such as libraries. It simplifies placing infrequently " +"used portions of a program in separate packages to reduce the number of " +"things the average user is required to install. Also, it allows for choices " +"in mail transport agents, X servers and so on." +msgstr "" + +#. type:

+#: guide.sgml:57 +msgid "" +"The first step to understanding the dependency system is to grasp the " +"concept of a simple dependency. The meaning of a simple dependency is that a " +"package requires another package to be installed at the same time to work " +"properly." +msgstr "" + +#. type:

+#: guide.sgml:63 +msgid "" +"For instance, mailcrypt is an emacs extension that aids in encrypting email " +"with GPG. Without GPGP installed mail-crypt is useless, so mailcrypt has a " +"simple dependency on GPG. Also, because it is an emacs extension it has a " +"simple dependency on emacs, without emacs it is completely useless." +msgstr "" + +#. type:

+#: guide.sgml:73 +msgid "" +"The other important dependency to understand is a conflicting dependency. It " +"means that a package, when installed with another package, will not work and " +"may possibly be extremely harmful to the system. As an example consider a " +"mail transport agent such as sendmail, exim or qmail. It is not possible to " +"have two mail transport agents installed because both need to listen to the " +"network to receive mail. Attempting to install two will seriously damage the " +"system so all mail transport agents have a conflicting dependency with all " +"other mail transport agents." +msgstr "" + +#. type:

+#: guide.sgml:83 +msgid "" +"As an added complication there is the possibility for a package to pretend " +"to be another package. Consider that exim and sendmail for many intents are " +"identical, they both deliver mail and understand a common interface. Hence, " +"the package system has a way for them to declare that they are both mail-" +"transport-agents. So, exim and sendmail both declare that they provide a " +"mail-transport-agent and other packages that need a mail transport agent " +"depend on mail-transport-agent. This can add a great deal of confusion when " +"trying to manually fix packages." +msgstr "" + +#. type:

+#: guide.sgml:88 +msgid "" +"At any given time a single dependency may be met by packages that are " +"already installed or it may not be. APT attempts to help resolve dependency " +"issues by providing a number of automatic algorithms that help in selecting " +"packages for installation." +msgstr "" + +#. type:

+#: guide.sgml:102 +msgid "" +"apt-get provides a simple way to install packages from the " +"command line. Unlike dpkg, apt-get does not " +"understand .deb files, it works with the package's proper name and can only " +"install .deb archives from a Source." +msgstr "" + +#. type:

+#: guide.sgml:109 +msgid "" +"The first

If you are using an http proxy server you must set " +"the http_proxy environment variable first, see sources.list(5)

thing that should be done before using apt-get is to " +"fetch the package lists from the Sources so that it knows what " +"packages are available. This is done with apt-get update. For " +"instance," +msgstr "" + +#. type: +#: guide.sgml:116 +#, no-wrap +msgid "" +"# apt-get update\n" +"Get http://ftp.de.debian.org/debian-non-US/ stable/binary-i386/ Packages\n" +"Get http://llug.sep.bnl.gov/debian/ testing/contrib Packages\n" +"Reading Package Lists... Done\n" +"Building Dependency Tree... Done" +msgstr "" + +#. type:

+#: guide.sgml:120 +msgid "Once updated there are several commands that can be used:" +msgstr "" + +#. type:

+#: guide.sgml:131 +msgid "" +"Upgrade will attempt to gently upgrade the whole system. Upgrade will never " +"install a new package or remove an existing package, nor will it ever " +"upgrade a package that might cause some other package to break. This can be " +"used daily to relatively safely upgrade the system. Upgrade will list all of " +"the packages that it could not upgrade, this usually means that they depend " +"on new packages or conflict with some other package. dselect or " +"apt-get install can be used to force these packages to install." +msgstr "" + +#. type:

+#: guide.sgml:140 +msgid "" +"Install is used to install packages by name. The package is automatically " +"fetched and installed. This can be useful if you already know the name of " +"the package to install and do not want to go into a GUI to select it. Any " +"number of packages may be passed to install, they will all be fetched. " +"Install automatically attempts to resolve dependency problems with the " +"listed packages and will print a summary and ask for confirmation if " +"anything other than its arguments are changed." +msgstr "" + +#. type:

+#: guide.sgml:149 +msgid "" +"Dist-upgrade is a complete upgrader designed to simplify upgrading between " +"releases of Debian. It uses a sophisticated algorithm to determine the best " +"set of packages to install, upgrade and remove to get as much of the system " +"to the newest release. In some situations it may be desired to use dist-" +"upgrade rather than spend the time manually resolving dependencies in " +"dselect. Once dist-upgrade has completed then dselect can be used to install any packages that may have been left out." +msgstr "" + +#. type:

+#: guide.sgml:152 +msgid "" +"It is important to closely look at what dist-upgrade is going to do, its " +"decisions may sometimes be quite surprising." +msgstr "" + +#. type:

+#: guide.sgml:163 +msgid "" +"apt-get has several command line options that are detailed in " +"its man page, . The most useful " +"option is -d which does not install the fetched files. If the " +"system has to download a large number of package it would be undesired to " +"start installing them in case something goes wrong. When -d is used " +"the downloaded archives can be installed by simply running the command that " +"caused them to be downloaded again without -d." +msgstr "" + +# type: Content of: +#. type: <heading></heading> +#: guide.sgml:168 +msgid "DSelect" +msgstr "DSelect" + +#. type: <p></p> +#: guide.sgml:173 +msgid "" +"The APT <prgn>dselect</prgn> method provides the complete APT system with " +"the <prgn>dselect</prgn> package selection GUI. <prgn>dselect</prgn> is used " +"to select the packages to be installed or removed and APT actually installs " +"them." +msgstr "" + +#. type: <p></p> +#: guide.sgml:184 +msgid "" +"To enable the APT method you need to to select [A]ccess in <prgn>dselect</" +"prgn> and then choose the APT method. You will be prompted for a set of " +"<em>Sources</em> which are places to fetch archives from. These can be " +"remote Internet sites, local Debian mirrors or CDROMs. Each source can " +"provide a fragment of the total Debian archive, APT will automatically " +"combine them to form a complete set of packages. If you have a CDROM then it " +"is a good idea to specify it first and then specify a mirror so that you " +"have access to the latest bug fixes. APT will automatically use packages on " +"your CDROM before downloading from the Internet." +msgstr "" + +#. type: <example></example> +#: guide.sgml:198 +#, no-wrap +msgid "" +" Set up a list of distribution source locations\n" +"\t \n" +" Please give the base URL of the debian distribution.\n" +" The access schemes I know about are: http file\n" +"\t \n" +" For example:\n" +" file:/mnt/debian,\n" +" ftp://ftp.debian.org/debian,\n" +" http://ftp.de.debian.org/debian,\n" +" \n" +" \n" +" URL [http://llug.sep.bnl.gov/debian]:" +msgstr "" + +#. type: <p></p> +#: guide.sgml:205 +msgid "" +"The <em>Sources</em> setup starts by asking for the base of the Debian " +"archive, defaulting to a HTTP mirror. Next it asks for the distribution to " +"get." +msgstr "" + +#. type: <example></example> +#: guide.sgml:212 +#, no-wrap +msgid "" +" Please give the distribution tag to get or a path to the\n" +" package file ending in a /. The distribution\n" +" tags are typically something like: stable unstable testing non-US\n" +" \n" +" Distribution [stable]:" +msgstr "" + +#. type: <p></p> +#: guide.sgml:222 +msgid "" +"The distribution refers to the Debian version in the archive, <em>stable</" +"em> refers to the latest released version and <em>unstable</em> refers to " +"the developmental version. <em>non-US</em> is only available on some mirrors " +"and refers to packages that contain encryption technology or other things " +"that cannot be exported from the United States. Importing these packages " +"into the US is legal however." +msgstr "" + +#. type: <example></example> +#: guide.sgml:228 +#, no-wrap +msgid "" +" Please give the components to get\n" +" The components are typically something like: main contrib non-free\n" +" \n" +" Components [main contrib non-free]:" +msgstr "" + +#. type: <p></p> +#: guide.sgml:236 +msgid "" +"The components list refers to the list of sub distributions to fetch. The " +"distribution is split up based on software licenses, main being DFSG free " +"packages while contrib and non-free contain things that have various " +"restrictions placed on their use and distribution." +msgstr "" + +#. type: <p></p> +#: guide.sgml:240 +msgid "" +"Any number of sources can be added, the setup script will continue to prompt " +"until you have specified all that you want." +msgstr "" + +#. type: <p></p> +#: guide.sgml:247 +msgid "" +"Before starting to use <prgn>dselect</prgn> it is necessary to update the " +"available list by selecting [U]pdate from the menu. This is a super-set of " +"<tt>apt-get update</tt> that makes the fetched information available to " +"<prgn>dselect</prgn>. [U]pdate must be performed even if <tt>apt-get update</" +"tt> has been run before." +msgstr "" + +#. type: <p></p> +#: guide.sgml:253 +msgid "" +"You can then go on and make your selections using [S]elect and then perform " +"the installation using [I]nstall. When using the APT method the [C]onfig and " +"[R]emove commands have no meaning, the [I]nstall command performs both of " +"them together." +msgstr "" + +#. type: <p></p> +#: guide.sgml:258 +msgid "" +"By default APT will automatically remove the package (.deb) files once they " +"have been successfully installed. To change this behavior place <tt>Dselect::" +"clean \"prompt\";</tt> in /etc/apt/apt.conf." +msgstr "" + +# type: <tag></tag> +#. type: <heading></heading> +#: guide.sgml:264 +#, fuzzy +msgid "The Interface" +msgstr "メソッドインスタンス" + +#. type: <p></p> +#: guide.sgml:278 +msgid "" +"Both that APT <prgn>dselect</prgn> method and <prgn>apt-get</prgn> share the " +"same interface. It is a simple system that generally tells you what it will " +"do and then goes and does it. <footnote><p>The <prgn>dselect</prgn> method " +"actually is a set of wrapper scripts to <prgn>apt-get</prgn>. The method " +"actually provides more functionality than is present in <prgn>apt-get</prgn> " +"alone.</p></footnote> After printing out a summary of what will happen APT " +"then will print out some informative status messages so that you can " +"estimate how far along it is and how much is left to do." +msgstr "" + +#. type: <heading></heading> +#: guide.sgml:280 +msgid "Startup" +msgstr "" + +#. type: <p></p> +#: guide.sgml:284 +msgid "" +"Before all operations except update, APT performs a number of actions to " +"prepare its internal state. It also does some checks of the system's state. " +"At any time these operations can be performed by running <tt>apt-get check</" +"tt>." +msgstr "" + +#. type: <example></example> +#: guide.sgml:289 +#, no-wrap +msgid "" +"# apt-get check\n" +"Reading Package Lists... Done\n" +"Building Dependency Tree... Done" +msgstr "" + +#. type: <p></p> +#: guide.sgml:297 +msgid "" +"The first thing it does is read all the package files into memory. APT uses " +"a caching scheme so this operation will be faster the second time it is run. " +"If some of the package files are not found then they will be ignored and a " +"warning will be printed when apt-get exits." +msgstr "" + +#. type: <p></p> +#: guide.sgml:303 +msgid "" +"The final operation performs a detailed analysis of the system's " +"dependencies. It checks every dependency of every installed or unpacked " +"package and considers if it is OK. Should this find a problem then a report " +"will be printed out and <prgn>apt-get</prgn> will refuse to run." +msgstr "" + +#. type: <example></example> +#: guide.sgml:320 +#, no-wrap +msgid "" +"# apt-get check\n" +"Reading Package Lists... Done\n" +"Building Dependency Tree... Done\n" +"You might want to run apt-get -f install' to correct these.\n" +"Sorry, but the following packages have unmet dependencies:\n" +" 9fonts: Depends: xlib6g but it is not installed\n" +" uucp: Depends: mailx but it is not installed\n" +" blast: Depends: xlib6g (>= 3.3-5) but it is not installed\n" +" adduser: Depends: perl-base but it is not installed\n" +" aumix: Depends: libgpmg1 but it is not installed\n" +" debiandoc-sgml: Depends: sgml-base but it is not installed\n" +" bash-builtins: Depends: bash (>= 2.01) but 2.0-3 is installed\n" +" cthugha: Depends: svgalibg1 but it is not installed\n" +" Depends: xlib6g (>= 3.3-5) but it is not installed\n" +" libreadlineg2: Conflicts:libreadline2 (<< 2.1-2.1)" +msgstr "" + +#. type: <p></p> +#: guide.sgml:329 +msgid "" +"In this example the system has many problems, including a serious problem " +"with libreadlineg2. For each package that has unmet dependencies a line is " +"printed out indicating the package with the problem and the dependencies " +"that are unmet. A short explanation of why the package has a dependency " +"problem is also included." +msgstr "" + +#. type: <p></p> +#: guide.sgml:337 +msgid "" +"There are two ways a system can get into a broken state like this. The first " +"is caused by <prgn>dpkg</prgn> missing some subtle relationships between " +"packages when performing upgrades. <footnote><p>APT however considers all " +"known dependencies and attempts to prevent broken packages</p></footnote>. " +"The second is if a package installation fails during an operation. In this " +"situation a package may have been unpacked without its dependents being " +"installed." +msgstr "" + +#. type: <p></p> +#: guide.sgml:345 +msgid "" +"The second situation is much less serious than the first because APT places " +"certain constraints on the order that packages are installed. In both cases " +"supplying the <tt>-f</tt> option to <prgn>apt-get</prgn> will cause APT to " +"deduce a possible solution to the problem and then continue on. The APT " +"<prgn>dselect</prgn> method always supplies the <tt>-f</tt> option to allow " +"for easy continuation of failed maintainer scripts." +msgstr "" + +#. type: <p></p> +#: guide.sgml:351 +msgid "" +"However, if the <tt>-f</tt> option is used to correct a seriously broken " +"system caused by the first case then it is possible that it will either fail " +"immediately or the installation sequence will fail. In either case it is " +"necessary to manually use dpkg (possibly with forcing options) to correct " +"the situation enough to allow APT to proceed." +msgstr "" + +#. type: <heading></heading> +#: guide.sgml:356 +msgid "The Status Report" +msgstr "" + +#. type: <p></p> +#: guide.sgml:363 +msgid "" +"Before proceeding <prgn>apt-get</prgn> will present a report on what will " +"happen. Generally the report reflects the type of operation being performed " +"but there are several common elements. In all cases the lists reflect the " +"final state of things, taking into account the <tt>-f</tt> option and any " +"other relevant activities to the command being executed." +msgstr "" + +# type: <tag></tag> +#. type: <heading></heading> +#: guide.sgml:364 +#, fuzzy +msgid "The Extra Package list" +msgstr "NextPackage" + +#. type: <example></example> +#: guide.sgml:372 +#, no-wrap +msgid "" +"The following extra packages will be installed:\n" +" libdbd-mysql-perl xlib6 zlib1 xzx libreadline2 libdbd-msql-perl\n" +" mailpgp xdpkg fileutils pinepgp zlib1g xlib6g perl-base\n" +" bin86 libgdbm1 libgdbmg1 quake-lib gmp2 bcc xbuffy\n" +" squake pgp-i python-base debmake ldso perl libreadlineg2\n" +" ssh" +msgstr "" + +#. type: <p></p> +#: guide.sgml:379 +msgid "" +"The Extra Package list shows all of the packages that will be installed or " +"upgraded in excess of the ones mentioned on the command line. It is only " +"generated for an <tt>install</tt> command. The listed packages are often the " +"result of an Auto Install." +msgstr "" + +#. type: <heading></heading> +#: guide.sgml:382 +msgid "The Packages to Remove" +msgstr "" + +#. type: <example></example> +#: guide.sgml:389 +#, no-wrap +msgid "" +"The following packages will be REMOVED:\n" +" xlib6-dev xpat2 tk40-dev xkeycaps xbattle xonix\n" +" xdaliclock tk40 tk41 xforms0.86 ghostview xloadimage xcolorsel\n" +" xadmin xboard perl-debug tkined xtetris libreadline2-dev perl-suid\n" +" nas xpilot xfig" +msgstr "" + +#. type: <p></p> +#: guide.sgml:399 +msgid "" +"The Packages to Remove list shows all of the packages that will be removed " +"from the system. It can be shown for any of the operations and should be " +"given a careful inspection to ensure nothing important is to be taken off. " +"The <tt>-f</tt> option is especially good at generating packages to remove " +"so extreme care should be used in that case. The list may contain packages " +"that are going to be removed because they are only partially installed, " +"possibly due to an aborted installation." +msgstr "" + +# type: <tag></tag> +#. type: <heading></heading> +#: guide.sgml:402 +#, fuzzy +msgid "The New Packages list" +msgstr "NextPackage" + +#. type: <example></example> +#: guide.sgml:406 +#, no-wrap +msgid "" +"The following NEW packages will installed:\n" +" zlib1g xlib6g perl-base libgdbmg1 quake-lib gmp2 pgp-i python-base" +msgstr "" + +#. type: <p></p> +#: guide.sgml:411 +msgid "" +"The New Packages list is simply a reminder of what will happen. The packages " +"listed are not presently installed in the system but will be when APT is " +"done." +msgstr "" + +# type: <tag></tag> +#. type: <heading></heading> +#: guide.sgml:414 +#, fuzzy +msgid "The Kept Back list" +msgstr "NextPackage" + +#. type: <example></example> +#: guide.sgml:419 +#, no-wrap +msgid "" +"The following packages have been kept back\n" +" compface man-db tetex-base msql libpaper svgalib1\n" +" gs snmp arena lynx xpat2 groff xscreensaver" +msgstr "" + +#. type: <p></p> +#: guide.sgml:428 +msgid "" +"Whenever the whole system is being upgraded there is the possibility that " +"new versions of packages cannot be installed because they require new things " +"or conflict with already installed things. In this case the package will " +"appear in the Kept Back list. The best way to convince packages listed there " +"to install is with <tt>apt-get install</tt> or by using <prgn>dselect</prgn> " +"to resolve their problems." +msgstr "" + +#. type: <heading></heading> +#: guide.sgml:431 +msgid "Held Packages warning" +msgstr "" + +#. type: <example></example> +#: guide.sgml:435 +#, no-wrap +msgid "" +"The following held packages will be changed:\n" +" cvs" +msgstr "" + +#. type: <p></p> +#: guide.sgml:441 +msgid "" +"Sometimes you can ask APT to install a package that is on hold, in such a " +"case it prints out a warning that the held package is going to be changed. " +"This should only happen during dist-upgrade or install." +msgstr "" + +#. type: <heading></heading> +#: guide.sgml:444 +msgid "Final summary" +msgstr "" + +#. type: <p></p> +#: guide.sgml:447 +msgid "" +"Finally, APT will print out a summary of all the changes that will occur." +msgstr "" + +#. type: <example></example> +#: guide.sgml:452 +#, no-wrap +msgid "" +"206 packages upgraded, 8 newly installed, 23 to remove and 51 not upgraded.\n" +"12 packages not fully installed or removed.\n" +"Need to get 65.7M/66.7M of archives. After unpacking 26.5M will be used." +msgstr "" + +#. type: <p></p> +#: guide.sgml:470 +msgid "" +"The first line of the summary simply is a reduced version of all of the " +"lists and includes the number of upgrades - that is packages already " +"installed that have new versions available. The second line indicates the " +"number of poorly configured packages, possibly the result of an aborted " +"installation. The final line shows the space requirements that the " +"installation needs. The first pair of numbers refer to the size of the " +"archive files. The first number indicates the number of bytes that must be " +"fetched from remote locations and the second indicates the total size of all " +"the archives required. The next number indicates the size difference between " +"the presently installed packages and the newly installed packages. It is " +"roughly equivalent to the space required in /usr after everything is done. " +"If a large number of packages are being removed then the value may indicate " +"the amount of space that will be freed." +msgstr "" + +#. type: <p></p> +#: guide.sgml:473 +msgid "" +"Some other reports can be generated by using the -u option to show packages " +"to upgrade, they are similar to the previous examples." +msgstr "" + +#. type: <heading></heading> +#: guide.sgml:477 +msgid "The Status Display" +msgstr "" + +#. type: <p></p> +#: guide.sgml:481 +msgid "" +"During the download of archives and package files APT prints out a series of " +"status messages." +msgstr "" + +#. type: <example></example> +#: guide.sgml:490 +#, no-wrap +msgid "" +"# apt-get update\n" +"Get:1 http://ftp.de.debian.org/debian-non-US/ stable/non-US/ Packages\n" +"Get:2 http://llug.sep.bnl.gov/debian/ testing/contrib Packages\n" +"Hit http://llug.sep.bnl.gov/debian/ testing/main Packages\n" +"Get:4 http://ftp.de.debian.org/debian-non-US/ unstable/binary-i386/ Packages\n" +"Get:5 http://llug.sep.bnl.gov/debian/ testing/non-free Packages\n" +"11% [5 testing/non-free `Waiting for file' 0/32.1k 0%] 2203b/s 1m52s" +msgstr "" + +#. type: <p></p> +#: guide.sgml:500 +msgid "" +"The lines starting with <em>Get</em> are printed out when APT begins to " +"fetch a file while the last line indicates the progress of the download. The " +"first percent value on the progress line indicates the total percent done of " +"all files. Unfortunately since the size of the Package files is unknown " +"<tt>apt-get update</tt> estimates the percent done which causes some " +"inaccuracies." +msgstr "" + +#. type: <p></p> +#: guide.sgml:509 +msgid "" +"The next section of the status line is repeated once for each download " +"thread and indicates the operation being performed and some useful " +"information about what is happening. Sometimes this section will simply read " +"<em>Forking</em> which means the OS is loading the download module. The " +"first word after the [ is the fetch number as shown on the history lines. " +"The next word is the short form name of the object being downloaded. For " +"archives it will contain the name of the package that is being fetched." +msgstr "" + +#. type: <p></p> +#: guide.sgml:524 +msgid "" +"Inside of the single quote is an informative string indicating the progress " +"of the negotiation phase of the download. Typically it progresses from " +"<em>Connecting</em> to <em>Waiting for file</em> to <em>Downloading</em> or " +"<em>Resuming</em>. The final value is the number of bytes downloaded from " +"the remote site. Once the download begins this is represented as " +"<tt>102/10.2k</tt> indicating that 102 bytes have been fetched and 10.2 " +"kilobytes is expected. The total size is always shown in 4 figure notation " +"to preserve space. After the size display is a percent meter for the file " +"itself. The second last element is the instantaneous average speed. This " +"values is updated every 5 seconds and reflects the rate of data transfer for " +"that period. Finally is shown the estimated transfer time. This is updated " +"regularly and reflects the time to complete everything at the shown transfer " +"rate." +msgstr "" + +#. type: <p></p> +#: guide.sgml:530 +msgid "" +"The status display updates every half second to provide a constant feedback " +"on the download progress while the Get lines scroll back whenever a new file " +"is started. Since the status display is constantly updated it is unsuitable " +"for logging to a file, use the <tt>-q</tt> option to remove the status " +"display." +msgstr "" + +# type: <heading></heading> +#. type: <heading></heading> +#: guide.sgml:535 +msgid "Dpkg" +msgstr "Dpkg" + +#. type: <p></p> +#: guide.sgml:542 +msgid "" +"APT uses <prgn>dpkg</prgn> for installing the archives and will switch over " +"to the <prgn>dpkg</prgn> interface once downloading is completed. " +"<prgn>dpkg</prgn> will also ask a number of questions as it processes the " +"packages and the packages themselves may also ask several questions. Before " +"each question there is usually a description of what it is asking and the " +"questions are too varied to discuss completely here." +msgstr "" + +# type: <title> +#. type: +#: offline.sgml:4 +msgid "Using APT Offline" +msgstr "オフラインã§ã® APT ã®ä½¿ç”¨æ³•" + +#. type: +#: offline.sgml:7 +msgid "$Id: offline.sgml,v 1.8 2003/02/12 15:06:41 doogie Exp $" +msgstr "" + +# type: +#. type: +#: offline.sgml:12 +msgid "" +"This document describes how to use APT in a non-networked environment, " +"specifically a 'sneaker-net' approach for performing upgrades." +msgstr "" +"ã“ã®ãƒ‰ã‚­ãƒ¥ãƒ¡ãƒ³ãƒˆã¯ãƒãƒƒãƒˆãƒ¯ãƒ¼ã‚¯ãŒãªã„環境ã§ã® APT ã®ä½¿ç”¨æ–¹æ³•ã‚’説明ã—ã¦ã„ã¾ã™ã€‚" +"具体的ã«ã¯ã€ã‚¢ãƒƒãƒ—グレード時ã«ã€Œã‚¹ãƒ‹ãƒ¼ã‚«ãƒ¼ãƒãƒƒãƒˆã€ã‚¢ãƒ—ローãƒã§ã™ã€‚" + +# type: +#. type: +#: offline.sgml:16 +msgid "Copyright © Jason Gunthorpe, 1999." +msgstr "Copyright © Jason Gunthorpe, 1999." + +# type: Content of: +#. type: <heading></heading> +#: offline.sgml:32 +msgid "Introduction" +msgstr "ã¯ã˜ã‚ã«" + +#. type: <heading></heading> +#: offline.sgml:34 offline.sgml:65 offline.sgml:180 +#, fuzzy +msgid "Overview" +msgstr "OverrideDir" + +#. type: <p></p> +#: offline.sgml:40 +msgid "" +"Normally APT requires direct access to a Debian archive, either from a local " +"media or through a network. Another common complaint is that a Debian " +"machine is on a slow link, such as a modem and another machine has a very " +"fast connection but they are physically distant." +msgstr "" + +#. type: <p></p> +#: offline.sgml:51 +msgid "" +"The solution to this is to use large removable media such as a Zip disc or a " +"SuperDisk disc. These discs are not large enough to store the entire Debian " +"archive but can easily fit a subset large enough for most users. The idea is " +"to use APT to generate a list of packages that are required and then fetch " +"them onto the disc using another machine with good connectivity. It is even " +"possible to use another Debian machine with APT or to use a completely " +"different OS and a download tool like wget. Let <em>remote host</em> mean " +"the machine downloading the packages, and <em>target host</em> the one with " +"bad or no connection." +msgstr "" + +#. type: <p></p> +#: offline.sgml:57 +msgid "" +"This is achieved by creatively manipulating the APT configuration file. The " +"essential premis to tell APT to look on a disc for it's archive files. Note " +"that the disc should be formated with a filesystem that can handle long file " +"names such as ext2, fat32 or vfat." +msgstr "" + +# type: <title> +#. type: +#: offline.sgml:63 +#, fuzzy +msgid "Using APT on both machines" +msgstr "オフラインã§ã® APT ã®ä½¿ç”¨æ³•" + +#. type:

+#: offline.sgml:71 +msgid "" +"APT being available on both machines gives the simplest configuration. The " +"basic idea is to place a copy of the status file on the disc and use the " +"remote machine to fetch the latest package files and decide which packages " +"to download. The disk directory structure should look like:" +msgstr "" + +# type: +#. type: +#: offline.sgml:80 +#, no-wrap +msgid "" +" /disc/\n" +" archives/\n" +" partial/\n" +" lists/\n" +" partial/\n" +" status\n" +" sources.list\n" +" apt.conf" +msgstr "" +" /disc/\n" +" archives/\n" +" partial/\n" +" lists/\n" +" partial/\n" +" status\n" +" sources.list\n" +" apt.conf" + +# type: Content of: +#. type: <heading></heading> +#: offline.sgml:88 +#, fuzzy +msgid "The configuration file" +msgstr "ユーザã®è¨­å®š" + +#. type: <p></p> +#: offline.sgml:96 +msgid "" +"The configuration file should tell APT to store its files on the disc and to " +"use the configuration files on the disc as well. The sources.list should " +"contain the proper sites that you wish to use from the remote machine, and " +"the status file should be a copy of <em>/var/lib/dpkg/status</em> from the " +"<em>target host</em>. Please note, if you are using a local archive you must " +"use copy URIs, the syntax is identical to file URIs." +msgstr "" + +#. type: <p><example> +#: offline.sgml:100 +msgid "" +"<em>apt.conf</em> must contain the necessary information to make APT use the " +"disc:" +msgstr "" + +# type: <example></example> +#. type: <example></example> +#: offline.sgml:124 +#, fuzzy, no-wrap +msgid "" +" APT\n" +" {\n" +" /* This is not necessary if the two machines are the same arch, it tells\n" +" the remote APT what architecture the target machine is */\n" +" Architecture \"i386\";\n" +" \n" +" Get::Download-Only \"true\";\n" +" };\n" +" \n" +" Dir\n" +" {\n" +" /* Use the disc for state information and redirect the status file from\n" +" the /var/lib/dpkg default */\n" +" State \"/disc/\";\n" +" State::status \"status\";\n" +"\n" +" // Binary caches will be stored locally\n" +" Cache::archives \"/disc/archives/\";\n" +" Cache \"/tmp/\";\n" +" \n" +" // Location of the source list.\n" +" Etc \"/disc/\";\n" +" };" +msgstr "" +" APT\n" +" {\n" +" /* This is not necessary if the two machines are the same arch, it tells\n" +" the remote APT what architecture the Debian machine is */\n" +" Architecture \"i386\";\n" +" \n" +" Get::Download-Only \"true\";\n" +" };\n" +" \n" +" Dir\n" +" {\n" +" /* Use the disc for state information and redirect the status file from\n" +" the /var/lib/dpkg default */\n" +" State \"/disc/\";\n" +" State::status \"status\";\n" +"\n" +" // Binary caches will be stored locally\n" +" Cache::archives \"/disc/archives/\";\n" +" Cache \"/tmp/\";\n" +" \n" +" // Location of the source list.\n" +" Etc \"/disc/\";\n" +" };" + +#. type: </example></p> +#: offline.sgml:129 +msgid "" +"More details can be seen by examining the apt.conf man page and the sample " +"configuration file in <em>/usr/share/doc/apt/examples/apt.conf</em>." +msgstr "" + +#. type: <p><example> +#: offline.sgml:136 +msgid "" +"On the target machine the first thing to do is mount the disc and copy <em>/" +"var/lib/dpkg/status</em> to it. You will also need to create the directories " +"outlined in the Overview, <em>archives/partial/</em> and <em>lists/partial/</" +"em> Then take the disc to the remote machine and configure the sources.list. " +"On the remote machine execute the following:" +msgstr "" + +# type: <example></example> +#. type: <example></example> +#: offline.sgml:142 +#, fuzzy, no-wrap +msgid "" +" # export APT_CONFIG=\"/disc/apt.conf\"\n" +" # apt-get update\n" +" [ APT fetches the package files ]\n" +" # apt-get dist-upgrade\n" +" [ APT fetches all the packages needed to upgrade the target machine ]" +msgstr "" +" # export APT_CONFIG=\"/disc/apt.conf\"\n" +" # apt-get update\n" +" [ パッケージファイルをå–å¾—ã—ã¾ã™ ]\n" +" # apt-get dist-upgrade\n" +" [ アップグレードãŒå¿…è¦ãªå…¨ãƒ‘ッケージをå–å¾—ã—ã¾ã™ ]" + +#. type: </example></p> +#: offline.sgml:149 +msgid "" +"The dist-upgrade command can be replaced with any-other standard APT " +"commands, particularly dselect-upgrade. You can even use an APT front end " +"such as <em>dselect</em> However this presents a problem in communicating " +"your selections back to the local computer." +msgstr "" + +#. type: <p><example> +#: offline.sgml:153 +msgid "" +"Now the disc contains all of the index files and archives needed to upgrade " +"the target machine. Take the disc back and run:" +msgstr "" + +# type: <example></example> +#. type: <example></example> +#: offline.sgml:159 +#, fuzzy, no-wrap +msgid "" +" # export APT_CONFIG=\"/disc/apt.conf\"\n" +" # apt-get check\n" +" [ APT generates a local copy of the cache files ]\n" +" # apt-get --no-d -o dir::state::status=/var/lib/dpkg/status dist-upgrade\n" +" [ Or any other APT command ]" +msgstr "" +" # export APT_CONFIG=\"/disc/apt.conf\"\n" +" # apt-get update\n" +" [ パッケージファイルをå–å¾—ã—ã¾ã™ ]\n" +" # apt-get dist-upgrade\n" +" [ アップグレードãŒå¿…è¦ãªå…¨ãƒ‘ッケージをå–å¾—ã—ã¾ã™ ]" + +#. type: <p></p> +#: offline.sgml:165 +msgid "" +"It is necessary for proper function to re-specify the status file to be the " +"local one. This is very important!" +msgstr "" + +#. type: <p></p> +#: offline.sgml:172 +msgid "" +"If you are using dselect you can do the very risky operation of copying disc/" +"status to /var/lib/dpkg/status so that any selections you made on the remote " +"machine are updated. I highly recommend that people only make selections on " +"the local machine - but this may not always be possible. DO NOT copy the " +"status file if dpkg or APT have been run in the mean time!!" +msgstr "" + +# type: <title> +#. type: +#: offline.sgml:178 +#, fuzzy +msgid "Using APT and wget" +msgstr "オフラインã§ã® APT ã®ä½¿ç”¨æ³•" + +#. type:

+#: offline.sgml:185 +msgid "" +"wget is a popular and portable download tool that can run on nearly " +"any machine. Unlike the method above this requires that the Debian machine " +"already has a list of available packages." +msgstr "" + +#. type:

+#: offline.sgml:190 +msgid "" +"The basic idea is to create a disc that has only the archive files " +"downloaded from the remote site. This is done by using the --print-uris " +"option to apt-get and then preparing a wget script to actually fetch the " +"packages." +msgstr "" + +# type: Content of: +#. type: <heading></heading> +#: offline.sgml:196 +#, fuzzy +msgid "Operation" +msgstr "オプション" + +#. type: <p><example> +#: offline.sgml:200 +msgid "" +"Unlike the previous technique no special configuration files are required. " +"We merely use the standard APT commands to generate the file list." +msgstr "" + +#. type: <example></example> +#: offline.sgml:205 +#, no-wrap +msgid "" +" # apt-get dist-upgrade \n" +" [ Press no when prompted, make sure you are happy with the actions ]\n" +" # apt-get -qq --print-uris dist-upgrade > uris\n" +" # awk '{print \"wget -O \" $2 \" \" $1}' < uris > /disc/wget-script" +msgstr "" + +#. type: </example></p> +#: offline.sgml:210 +msgid "" +"Any command other than dist-upgrade could be used here, including dselect-" +"upgrade." +msgstr "" + +#. type: <p></p> +#: offline.sgml:216 +msgid "" +"The /disc/wget-script file will now contain a list of wget commands to " +"execute in order to fetch the necessary archives. This script should be run " +"with the current directory as the disc's mount point so as to save the " +"output on the disc." +msgstr "" + +#. type: <p><example> +#: offline.sgml:219 +msgid "The remote machine would do something like" +msgstr "" + +#. type: <example></example> +#: offline.sgml:223 +#, no-wrap +msgid "" +" # cd /disc\n" +" # sh -x ./wget-script\n" +" [ wait.. ]" +msgstr "" + +#. type: </example><example> +#: offline.sgml:228 +msgid "" +"Once the archives are downloaded and the disc returned to the Debian machine " +"installation can proceed using," +msgstr "" + +#. type: <example></example> +#: offline.sgml:230 +#, no-wrap +msgid " # apt-get -o dir::cache::archives=\"/disc/\" dist-upgrade" +msgstr "" + +#. type: </example></p> +#: offline.sgml:234 +msgid "Which will use the already fetched archives on the disc." +msgstr "" + # type: Content of: <refentry><refnamediv><refname> #, fuzzy #~ msgid "NoConfigure" @@ -9353,18 +10485,10 @@ msgstr "&apt-cache; &apt-conf;" #~ msgid "<filename>&cachedir;/archives/partial/</filename>" #~ msgstr "<filename>&cachedir;/archives/partial/</filename>" -# type: <author></author> -#~ msgid "<name>Jason Gunthorpe </name><email>jgg@debian.org</email>" -#~ msgstr "<name>Jason Gunthorpe </name><email>jgg@debian.org</email>" - # type: <copyrightsummary></copyrightsummary> #~ msgid "Copyright © Jason Gunthorpe, 1997-1998." #~ msgstr "Copyright © Jason Gunthorpe, 1997-1998." -# type: Content of: <refentry><refsect1><title> -#~ msgid "Introduction" -#~ msgstr "ã¯ã˜ã‚ã«" - # type: Content of: <refentry><refnamediv><refpurpose> #, fuzzy #~ msgid "Note on Pointer access" @@ -9949,10 +11073,6 @@ msgstr "&apt-cache; &apt-conf;" #~ msgid "Copyright © Jason Gunthorpe, 1998-1999." #~ msgstr "Copyright © Jason Gunthorpe, 1997-1998." -#, fuzzy -#~ msgid "General" -#~ msgstr "generate" - #, fuzzy #~ msgid "" #~ "deb <var>uri</var> <var>distribution</var> <var>component</var> " @@ -10036,34 +11156,6 @@ msgstr "&apt-cache; &apt-conf;" #~ msgid "The Release File" #~ msgstr "ソースオーãƒãƒ¼ãƒ©ã‚¤ãƒ‰ãƒ•ã‚¡ã‚¤ãƒ«" -# type: <copyrightsummary></copyrightsummary> -#, fuzzy -#~ msgid "Copyright © Jason Gunthorpe, 1998." -#~ msgstr "Copyright © Jason Gunthorpe, 1999." - -# type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> -#, fuzzy -#~ msgid "Anatomy of the Package System" -#~ msgstr "パッケージå" - -# type: Content of: <refentry><refsect1><title> -#~ msgid "DSelect" -#~ msgstr "DSelect" - -# type: <tag></tag> -#, fuzzy -#~ msgid "The Extra Package list" -#~ msgstr "NextPackage" - -# type: <heading></heading> -#~ msgid "Dpkg" -#~ msgstr "Dpkg" - -# type: <tag></tag> -#, fuzzy -#~ msgid "APT Method Interface" -#~ msgstr "メソッドインスタンス" - # type: Content of: <refentry><refsect1><title> #~ msgid "Global configuration" #~ msgstr "共通設定" @@ -10094,10 +11186,6 @@ msgstr "&apt-cache; &apt-conf;" #~ msgid "Specification" #~ msgstr "仕様" -#, fuzzy -#~ msgid "Overview" -#~ msgstr "OverrideDir" - # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #, fuzzy #~ msgid "601 Configuration - Sends the configuration space" @@ -10160,147 +11248,5 @@ msgstr "&apt-cache; &apt-conf;" #~ msgid "Notes" #~ msgstr "contents" -# type: <title> -#~ msgid "Using APT Offline" -#~ msgstr "オフラインã§ã® APT ã®ä½¿ç”¨æ³•" - -# type: -#~ msgid "" -#~ "This document describes how to use APT in a non-networked environment, " -#~ "specifically a 'sneaker-net' approach for performing upgrades." -#~ msgstr "" -#~ "ã“ã®ãƒ‰ã‚­ãƒ¥ãƒ¡ãƒ³ãƒˆã¯ãƒãƒƒãƒˆãƒ¯ãƒ¼ã‚¯ãŒãªã„環境ã§ã® APT ã®ä½¿ç”¨æ–¹æ³•ã‚’説明ã—ã¦ã„ã¾" -#~ "ã™ã€‚具体的ã«ã¯ã€ã‚¢ãƒƒãƒ—グレード時ã«ã€Œã‚¹ãƒ‹ãƒ¼ã‚«ãƒ¼ãƒãƒƒãƒˆã€ã‚¢ãƒ—ローãƒã§ã™ã€‚" - -# type: -#~ msgid "Copyright © Jason Gunthorpe, 1999." -#~ msgstr "Copyright © Jason Gunthorpe, 1999." - -# type: -#, fuzzy -#~ msgid "Using APT on both machines" -#~ msgstr "オフラインã§ã® APT ã®ä½¿ç”¨æ³•" - -# type: -#~ msgid "" -#~ " /disc/\n" -#~ " archives/\n" -#~ " partial/\n" -#~ " lists/\n" -#~ " partial/\n" -#~ " status\n" -#~ " sources.list\n" -#~ " apt.conf" -#~ msgstr "" -#~ " /disc/\n" -#~ " archives/\n" -#~ " partial/\n" -#~ " lists/\n" -#~ " partial/\n" -#~ " status\n" -#~ " sources.list\n" -#~ " apt.conf" - -# type: Content of: -#, fuzzy -#~ msgid "The configuration file" -#~ msgstr "ユーザã®è¨­å®š" - -# type: <example></example> -#, fuzzy -#~ msgid "" -#~ " APT\n" -#~ " {\n" -#~ " /* This is not necessary if the two machines are the same arch, it " -#~ "tells\n" -#~ " the remote APT what architecture the target machine is */\n" -#~ " Architecture \"i386\";\n" -#~ " \n" -#~ " Get::Download-Only \"true\";\n" -#~ " };\n" -#~ " \n" -#~ " Dir\n" -#~ " {\n" -#~ " /* Use the disc for state information and redirect the status file " -#~ "from\n" -#~ " the /var/lib/dpkg default */\n" -#~ " State \"/disc/\";\n" -#~ " State::status \"status\";\n" -#~ "\n" -#~ " // Binary caches will be stored locally\n" -#~ " Cache::archives \"/disc/archives/\";\n" -#~ " Cache \"/tmp/\";\n" -#~ " \n" -#~ " // Location of the source list.\n" -#~ " Etc \"/disc/\";\n" -#~ " };" -#~ msgstr "" -#~ " APT\n" -#~ " {\n" -#~ " /* This is not necessary if the two machines are the same arch, it " -#~ "tells\n" -#~ " the remote APT what architecture the Debian machine is */\n" -#~ " Architecture \"i386\";\n" -#~ " \n" -#~ " Get::Download-Only \"true\";\n" -#~ " };\n" -#~ " \n" -#~ " Dir\n" -#~ " {\n" -#~ " /* Use the disc for state information and redirect the status file " -#~ "from\n" -#~ " the /var/lib/dpkg default */\n" -#~ " State \"/disc/\";\n" -#~ " State::status \"status\";\n" -#~ "\n" -#~ " // Binary caches will be stored locally\n" -#~ " Cache::archives \"/disc/archives/\";\n" -#~ " Cache \"/tmp/\";\n" -#~ " \n" -#~ " // Location of the source list.\n" -#~ " Etc \"/disc/\";\n" -#~ " };" - -# type: <example></example> -#, fuzzy -#~ msgid "" -#~ " # export APT_CONFIG=\"/disc/apt.conf\"\n" -#~ " # apt-get update\n" -#~ " [ APT fetches the package files ]\n" -#~ " # apt-get dist-upgrade\n" -#~ " [ APT fetches all the packages needed to upgrade the target machine ]" -#~ msgstr "" -#~ " # export APT_CONFIG=\"/disc/apt.conf\"\n" -#~ " # apt-get update\n" -#~ " [ パッケージファイルをå–å¾—ã—ã¾ã™ ]\n" -#~ " # apt-get dist-upgrade\n" -#~ " [ アップグレードãŒå¿…è¦ãªå…¨ãƒ‘ッケージをå–å¾—ã—ã¾ã™ ]" - -# type: <example></example> -#, fuzzy -#~ msgid "" -#~ " # export APT_CONFIG=\"/disc/apt.conf\"\n" -#~ " # apt-get check\n" -#~ " [ APT generates a local copy of the cache files ]\n" -#~ " # apt-get --no-d -o dir::state::status=/var/lib/dpkg/status dist-" -#~ "upgrade\n" -#~ " [ Or any other APT command ]" -#~ msgstr "" -#~ " # export APT_CONFIG=\"/disc/apt.conf\"\n" -#~ " # apt-get update\n" -#~ " [ パッケージファイルをå–å¾—ã—ã¾ã™ ]\n" -#~ " # apt-get dist-upgrade\n" -#~ " [ アップグレードãŒå¿…è¦ãªå…¨ãƒ‘ッケージをå–å¾—ã—ã¾ã™ ]" - -# type: <title> -#, fuzzy -#~ msgid "Using APT and wget" -#~ msgstr "オフラインã§ã® APT ã®ä½¿ç”¨æ³•" - -# type: Content of: -#, fuzzy -#~ msgid "Operation" -#~ msgstr "オプション" - #~ msgid "<literal>Debug::Vendor</literal>" #~ msgstr "<literal>Debug::Vendor</literal>" diff --git a/doc/po4a.conf b/doc/po4a.conf index edf8d0357..12f2465bc 100644 --- a/doc/po4a.conf +++ b/doc/po4a.conf @@ -33,6 +33,11 @@ add_$lang:$lang/addendum/xml_$lang.add [type: docbook] sources.list.5.xml $lang:$lang/sources.list.$lang.5.xml \ add_$lang:$lang/addendum/xml_$lang.add + +[type: sgml] guide.sgml $lang:$lang/guide.$lang.sgml \ + add_$lang::$lang/addendum/debiandoc_$lang.add +[type: sgml] offline.sgml $lang:$lang/offline.$lang.sgml \ + add_$lang::$lang/addendum/debiandoc_$lang.add #[type: sgml] cache.sgml $lang:$lang/cache.$lang.sgml \ # add_$lang::$lang/addendum/debiandoc_$lang.add #[type: sgml] design.sgml $lang:$lang/design.$lang.sgml\ @@ -41,10 +46,6 @@ # add_$lang::$lang/addendum/debiandoc_$lang.add #[type: sgml] files.sgml $lang:$lang/files.$lang.sgml\ # add_$lang::$lang/addendum/debiandoc_$lang.add -#[type: sgml] guide.sgml $lang:$lang/guide.$lang.sgml\ -# add_$lang::$lang/addendum/debiandoc_$lang.add #[type: sgml] method.sgml $lang:$lang/method.$lang.sgml\ # add_$lang::$lang/addendum/debiandoc_$lang.add -#[type: sgml] offline.sgml $lang:$lang/offline.$lang.sgml\ -# add_$lang::$lang/addendum/debiandoc_$lang.add -- cgit v1.2.3 From f66a64c26cb60656255c89fcd4fc757422d9545a Mon Sep 17 00:00:00 2001 From: David Kalnischkies <kalnischkies@gmail.com> Date: Thu, 1 Oct 2009 20:32:55 +0200 Subject: improve the documentation and errormessages regarding a failing immediate configuration as the old message was quite a bit scare and uninformative. --- doc/apt.conf.5.xml | 21 ++- doc/po/apt-doc.pot | 367 ++++++++++++++++++++++++++------------------------ doc/po/fr.po | 387 ++++++++++++++++++++++++++++------------------------- doc/po/ja.po | 387 ++++++++++++++++++++++++++++------------------------- 4 files changed, 620 insertions(+), 542 deletions(-) (limited to 'doc') diff --git a/doc/apt.conf.5.xml b/doc/apt.conf.5.xml index e752f9d27..36b65b073 100644 --- a/doc/apt.conf.5.xml +++ b/doc/apt.conf.5.xml @@ -151,11 +151,22 @@ DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt";}; </varlistentry> <varlistentry><term>Immediate-Configure</term> - <listitem><para>Disable Immediate Configuration; This dangerous option disables some - of APT's ordering code to cause it to make fewer dpkg calls. Doing - so may be necessary on some extremely slow single user systems but - is very dangerous and may cause package install scripts to fail or worse. - Use at your own risk.</para></listitem> + <listitem><para>Defaults to on which will cause APT to install essential and important packages + as fast as possible in the install/upgrade operation. This is done to limit the effect of a failing + &dpkg; call: If this option is disabled APT doesn't treat an important package in the same way as + an extra package: Between the unpacking of the important package A and his configuration can then + be many other unpack or configuration calls, e.g. for package B which has no relation to A, but + causes the dpkg call to fail (e.g. because maintainer script of package B generates an error) which results + in a system state in which package A is unpacked but unconfigured - each package depending on A is now no + longer guaranteed to work as their dependency on A is not longer satisfied. The immediate configuration marker + is also applied to all dependencies which can generate a problem if the dependencies e.g. form a circle + as a dependency with the immediate flag is comparable with a Pre-Dependency. So in theory it is possible + that APT encounters a situation in which it is unable to perform immediate configuration, error out and + refers to this option so the user can deactivate the immediate configuration temporary to be able to perform + an install/upgrade again. Note the use of the word "theory" here as this problem was only encountered by now + in real world a few times in non-stable distribution versions and caused by wrong dependencies of the package + in question, so you should not blindly disable this option as the mentioned scenario above is not the only + problem immediate configuration can help to prevent in the first place.</para></listitem> </varlistentry> <varlistentry><term>Force-LoopBreak</term> diff --git a/doc/po/apt-doc.pot b/doc/po/apt-doc.pot index 82a4afe67..0037b235b 100644 --- a/doc/po/apt-doc.pot +++ b/doc/po/apt-doc.pot @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2009-10-01 18:09+0300\n" +"POT-Creation-Date: 2009-10-01 20:13+0300\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -1218,7 +1218,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt-cache.8.xml:281 apt-config.8.xml:93 apt-extracttemplates.1.xml:56 apt-ftparchive.1.xml:492 apt-get.8.xml:319 apt-mark.8.xml:89 apt-sortpkgs.1.xml:54 apt.conf.5.xml:436 apt.conf.5.xml:458 +#: apt-cache.8.xml:281 apt-config.8.xml:93 apt-extracttemplates.1.xml:56 apt-ftparchive.1.xml:492 apt-get.8.xml:319 apt-mark.8.xml:89 apt-sortpkgs.1.xml:54 apt.conf.5.xml:447 apt.conf.5.xml:469 msgid "options" msgstr "" @@ -1416,7 +1416,7 @@ msgid "&apt-commonoptions;" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt-cache.8.xml:361 apt-get.8.xml:559 apt-key.8.xml:138 apt-mark.8.xml:122 apt.conf.5.xml:968 apt_preferences.5.xml:615 +#: apt-cache.8.xml:361 apt-get.8.xml:559 apt-key.8.xml:138 apt-mark.8.xml:122 apt.conf.5.xml:979 apt_preferences.5.xml:615 msgid "Files" msgstr "" @@ -1426,7 +1426,7 @@ msgid "&file-sourceslist; &file-statelists;" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt-cache.8.xml:368 apt-cdrom.8.xml:155 apt-config.8.xml:103 apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:563 apt-get.8.xml:569 apt-key.8.xml:162 apt-mark.8.xml:133 apt-secure.8.xml:181 apt-sortpkgs.1.xml:69 apt.conf.5.xml:974 apt_preferences.5.xml:622 sources.list.5.xml:221 +#: apt-cache.8.xml:368 apt-cdrom.8.xml:155 apt-config.8.xml:103 apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:563 apt-get.8.xml:569 apt-key.8.xml:162 apt-mark.8.xml:133 apt-secure.8.xml:181 apt-sortpkgs.1.xml:69 apt.conf.5.xml:985 apt_preferences.5.xml:622 sources.list.5.xml:221 msgid "See Also" msgstr "" @@ -2681,7 +2681,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt-ftparchive.1.xml:552 apt.conf.5.xml:962 apt_preferences.5.xml:462 sources.list.5.xml:181 +#: apt-ftparchive.1.xml:552 apt.conf.5.xml:973 apt_preferences.5.xml:462 sources.list.5.xml:181 msgid "Examples" msgstr "" @@ -4403,20 +4403,37 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml:154 msgid "" -"Disable Immediate Configuration; This dangerous option disables some of " -"APT's ordering code to cause it to make fewer dpkg calls. Doing so may be " -"necessary on some extremely slow single user systems but is very dangerous " -"and may cause package install scripts to fail or worse. Use at your own " -"risk." -msgstr "" - -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:161 +"Defaults to on which will cause APT to install essential and important " +"packages as fast as possible in the install/upgrade operation. This is done " +"to limit the effect of a failing &dpkg; call: If this option is disabled APT " +"doesn't treat an important package in the same way as an extra package: " +"Between the unpacking of the important package A and his configuration can " +"then be many other unpack or configuration calls, e.g. for package B which " +"has no relation to A, but causes the dpkg call to fail (e.g. because " +"maintainer script of package B generates an error) which results in a system " +"state in which package A is unpacked but unconfigured - each package " +"depending on A is now no longer guaranteed to work as their dependency on A " +"is not longer satisfied. The immediate configuration marker is also applied " +"to all dependencies which can generate a problem if the dependencies " +"e.g. form a circle as a dependency with the immediate flag is comparable " +"with a Pre-Dependency. So in theory it is possible that APT encounters a " +"situation in which it is unable to perform immediate configuration, error " +"out and refers to this option so the user can deactivate the immediate " +"configuration temporary to be able to perform an install/upgrade again. Note " +"the use of the word \"theory\" here as this problem was only encountered by " +"now in real world a few times in non-stable distribution versions and caused " +"by wrong dependencies of the package in question, so you should not blindly " +"disable this option as the mentioned scenario above is not the only problem " +"immediate configuration can help to prevent in the first place." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:172 msgid "Force-LoopBreak" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:162 +#: apt.conf.5.xml:173 msgid "" "Never Enable this option unless you -really- know what you are doing. It " "permits APT to temporarily remove an essential package to break a " @@ -4427,87 +4444,87 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:170 +#: apt.conf.5.xml:181 msgid "Cache-Limit" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:171 +#: apt.conf.5.xml:182 msgid "" "APT uses a fixed size memory mapped cache file to store the 'available' " "information. This sets the size of that cache (in bytes)." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:175 +#: apt.conf.5.xml:186 msgid "Build-Essential" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:176 +#: apt.conf.5.xml:187 msgid "Defines which package(s) are considered essential build dependencies." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:179 +#: apt.conf.5.xml:190 msgid "Get" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:180 +#: apt.conf.5.xml:191 msgid "" "The Get subsection controls the &apt-get; tool, please see its documentation " "for more information about the options here." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:184 +#: apt.conf.5.xml:195 msgid "Cache" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:185 +#: apt.conf.5.xml:196 msgid "" "The Cache subsection controls the &apt-cache; tool, please see its " "documentation for more information about the options here." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:189 +#: apt.conf.5.xml:200 msgid "CDROM" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:190 +#: apt.conf.5.xml:201 msgid "" "The CDROM subsection controls the &apt-cdrom; tool, please see its " "documentation for more information about the options here." msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:196 +#: apt.conf.5.xml:207 msgid "The Acquire Group" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:201 +#: apt.conf.5.xml:212 msgid "PDiffs" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:202 +#: apt.conf.5.xml:213 msgid "" "Try to download deltas called <literal>PDiffs</literal> for Packages or " "Sources files instead of downloading whole ones. True by default." msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:207 +#: apt.conf.5.xml:218 msgid "Queue-Mode" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:208 +#: apt.conf.5.xml:219 msgid "" "Queuing mode; <literal>Queue-Mode</literal> can be one of " "<literal>host</literal> or <literal>access</literal> which determines how " @@ -4517,36 +4534,36 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:215 +#: apt.conf.5.xml:226 msgid "Retries" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:216 +#: apt.conf.5.xml:227 msgid "" "Number of retries to perform. If this is non-zero APT will retry failed " "files the given number of times." msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:220 +#: apt.conf.5.xml:231 msgid "Source-Symlinks" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:221 +#: apt.conf.5.xml:232 msgid "" "Use symlinks for source archives. If set to true then source archives will " "be symlinked when possible instead of copying. True is the default." msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:225 sources.list.5.xml:139 +#: apt.conf.5.xml:236 sources.list.5.xml:139 msgid "http" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:226 +#: apt.conf.5.xml:237 msgid "" "HTTP URIs; http::Proxy is the default http proxy to use. It is in the " "standard form of <literal>http://[[user][:pass]@]host[:port]/</literal>. Per " @@ -4558,7 +4575,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:234 +#: apt.conf.5.xml:245 msgid "" "Three settings are provided for cache control with HTTP/1.1 compliant proxy " "caches. <literal>No-Cache</literal> tells the proxy to not use its cached " @@ -4572,7 +4589,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:244 apt.conf.5.xml:301 +#: apt.conf.5.xml:255 apt.conf.5.xml:312 msgid "" "The option <literal>timeout</literal> sets the timeout timer used by the " "method, this applies to all things including connection timeout and data " @@ -4580,7 +4597,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:247 +#: apt.conf.5.xml:258 msgid "" "One setting is provided to control the pipeline depth in cases where the " "remote server is not RFC conforming or buggy (such as Squid 2.0.2) " @@ -4592,7 +4609,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:255 +#: apt.conf.5.xml:266 msgid "" "The used bandwidth can be limited with " "<literal>Acquire::http::Dl-Limit</literal> which accepts integer values in " @@ -4602,12 +4619,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:261 +#: apt.conf.5.xml:272 msgid "https" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:262 +#: apt.conf.5.xml:273 msgid "" "HTTPS URIs. Cache-control and proxy options are the same as for " "<literal>http</literal> method. <literal>Pipeline-Depth</literal> option is " @@ -4615,7 +4632,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:266 +#: apt.conf.5.xml:277 msgid "" "<literal>CaInfo</literal> suboption specifies place of file that holds info " "about trusted certificates. <literal><host>::CaInfo</literal> is " @@ -4637,12 +4654,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:284 sources.list.5.xml:150 +#: apt.conf.5.xml:295 sources.list.5.xml:150 msgid "ftp" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:285 +#: apt.conf.5.xml:296 msgid "" "FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the standard " "form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. Per host " @@ -4662,7 +4679,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:304 +#: apt.conf.5.xml:315 msgid "" "Several settings are provided to control passive mode. Generally it is safe " "to leave passive mode on, it works in nearly every environment. However " @@ -4672,7 +4689,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:311 +#: apt.conf.5.xml:322 msgid "" "It is possible to proxy FTP over HTTP by setting the " "<envar>ftp_proxy</envar> environment variable to a http url - see the " @@ -4682,7 +4699,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:316 +#: apt.conf.5.xml:327 msgid "" "The setting <literal>ForceExtended</literal> controls the use of RFC2428 " "<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is " @@ -4692,18 +4709,18 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:323 sources.list.5.xml:132 +#: apt.conf.5.xml:334 sources.list.5.xml:132 msgid "cdrom" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:329 +#: apt.conf.5.xml:340 #, no-wrap msgid "\"/cdrom/\"::Mount \"foo\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:324 +#: apt.conf.5.xml:335 msgid "" "CDROM URIs; the only setting for CDROM URIs is the mount point, " "<literal>cdrom::Mount</literal> which must be the mount point for the CDROM " @@ -4716,12 +4733,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:334 +#: apt.conf.5.xml:345 msgid "gpgv" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:335 +#: apt.conf.5.xml:346 msgid "" "GPGV URIs; the only option for GPGV URIs is the option to pass additional " "parameters to gpgv. <literal>gpgv::Options</literal> Additional options " @@ -4729,12 +4746,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:340 +#: apt.conf.5.xml:351 msgid "CompressionTypes" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:346 +#: apt.conf.5.xml:357 #, no-wrap msgid "" "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> " @@ -4742,7 +4759,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:341 +#: apt.conf.5.xml:352 msgid "" "List of compression types which are understood by the acquire methods. " "Files like <filename>Packages</filename> can be available in various " @@ -4754,19 +4771,19 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:351 +#: apt.conf.5.xml:362 #, no-wrap msgid "Acquire::CompressionTypes::Order:: \"gz\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:354 +#: apt.conf.5.xml:365 #, no-wrap msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:347 +#: apt.conf.5.xml:358 msgid "" "Also the <literal>Order</literal> subgroup can be used to define in which " "order the acquire system will try to download the compressed files. The " @@ -4783,13 +4800,13 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:358 +#: apt.conf.5.xml:369 #, no-wrap msgid "Dir::Bin::bzip2 \"/bin/bzip2\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:356 +#: apt.conf.5.xml:367 msgid "" "Note that at run time the " "<literal>Dir::Bin::<replaceable>Methodname</replaceable></literal> will be " @@ -4804,7 +4821,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:363 +#: apt.conf.5.xml:374 msgid "" "While it is possible to add an empty compression type to the order list, but " "APT in its current version doesn't understand it correctly and will display " @@ -4814,7 +4831,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:197 +#: apt.conf.5.xml:208 msgid "" "The <literal>Acquire</literal> group of options controls the download of " "packages and the URI handlers. <placeholder type=\"variablelist\" " @@ -4822,12 +4839,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:372 +#: apt.conf.5.xml:383 msgid "Directories" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:374 +#: apt.conf.5.xml:385 msgid "" "The <literal>Dir::State</literal> section has directories that pertain to " "local state information. <literal>lists</literal> is the directory to place " @@ -4839,7 +4856,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:381 +#: apt.conf.5.xml:392 msgid "" "<literal>Dir::Cache</literal> contains locations pertaining to local cache " "information, such as the two package caches <literal>srcpkgcache</literal> " @@ -4852,7 +4869,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:390 +#: apt.conf.5.xml:401 msgid "" "<literal>Dir::Etc</literal> contains the location of configuration files, " "<literal>sourcelist</literal> gives the location of the sourcelist and " @@ -4862,7 +4879,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:396 +#: apt.conf.5.xml:407 msgid "" "The <literal>Dir::Parts</literal> setting reads in all the config fragments " "in lexical order from the directory specified. After this is done then the " @@ -4870,7 +4887,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:400 +#: apt.conf.5.xml:411 msgid "" "Binary programs are pointed to by " "<literal>Dir::Bin</literal>. <literal>Dir::Bin::Methods</literal> specifies " @@ -4882,7 +4899,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:408 +#: apt.conf.5.xml:419 msgid "" "The configuration item <literal>RootDir</literal> has a special meaning. If " "set, all paths in <literal>Dir::</literal> will be relative to " @@ -4895,12 +4912,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:421 +#: apt.conf.5.xml:432 msgid "APT in DSelect" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:423 +#: apt.conf.5.xml:434 msgid "" "When APT is used as a &dselect; method several configuration directives " "control the default behaviour. These are in the <literal>DSelect</literal> " @@ -4908,12 +4925,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:427 +#: apt.conf.5.xml:438 msgid "Clean" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:428 +#: apt.conf.5.xml:439 msgid "" "Cache Clean mode; this value may be one of always, prompt, auto, pre-auto " "and never. always and prompt will remove all packages from the cache after " @@ -4924,50 +4941,50 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:437 +#: apt.conf.5.xml:448 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the install phase." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:441 +#: apt.conf.5.xml:452 msgid "Updateoptions" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:442 +#: apt.conf.5.xml:453 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the update phase." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:446 +#: apt.conf.5.xml:457 msgid "PromptAfterUpdate" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:447 +#: apt.conf.5.xml:458 msgid "" "If true the [U]pdate operation in &dselect; will always prompt to continue. " "The default is to prompt only on error." msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:453 +#: apt.conf.5.xml:464 msgid "How APT calls dpkg" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:454 +#: apt.conf.5.xml:465 msgid "" "Several configuration directives control how APT invokes &dpkg;. These are " "in the <literal>DPkg</literal> section." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:459 +#: apt.conf.5.xml:470 msgid "" "This is a list of options to pass to dpkg. The options must be specified " "using the list notation and each list item is passed as a single argument to " @@ -4975,17 +4992,17 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:464 +#: apt.conf.5.xml:475 msgid "Pre-Invoke" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:464 +#: apt.conf.5.xml:475 msgid "Post-Invoke" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:465 +#: apt.conf.5.xml:476 msgid "" "This is a list of shell commands to run before/after invoking &dpkg;. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -4994,12 +5011,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:471 +#: apt.conf.5.xml:482 msgid "Pre-Install-Pkgs" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:472 +#: apt.conf.5.xml:483 msgid "" "This is a list of shell commands to run before invoking dpkg. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -5009,7 +5026,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:478 +#: apt.conf.5.xml:489 msgid "" "Version 2 of this protocol dumps more information, including the protocol " "version, the APT configuration space and the packages, files and versions " @@ -5020,36 +5037,36 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:485 +#: apt.conf.5.xml:496 msgid "Run-Directory" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:486 +#: apt.conf.5.xml:497 msgid "" "APT chdirs to this directory before invoking dpkg, the default is " "<filename>/</filename>." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:490 +#: apt.conf.5.xml:501 msgid "Build-options" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:491 +#: apt.conf.5.xml:502 msgid "" "These options are passed to &dpkg-buildpackage; when compiling packages, the " "default is to disable signing and produce all binaries." msgstr "" #. type: Content of: <refentry><refsect1><refsect2><title> -#: apt.conf.5.xml:496 +#: apt.conf.5.xml:507 msgid "dpkg trigger usage (and related options)" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:497 +#: apt.conf.5.xml:508 msgid "" "APT can call dpkg in a way so it can make aggressive use of triggers over " "multiply calls of dpkg. Without further options dpkg will use triggers only " @@ -5064,7 +5081,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para><literallayout> -#: apt.conf.5.xml:512 +#: apt.conf.5.xml:523 #, no-wrap msgid "" "DPkg::NoTriggers \"true\";\n" @@ -5074,7 +5091,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:506 +#: apt.conf.5.xml:517 msgid "" "Note that it is not guaranteed that APT will support these options or that " "these options will not cause (big) trouble in the future. If you have " @@ -5088,12 +5105,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:518 +#: apt.conf.5.xml:529 msgid "DPkg::NoTriggers" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:519 +#: apt.conf.5.xml:530 msgid "" "Add the no triggers flag to all dpkg calls (expect the ConfigurePending " "call). See &dpkg; if you are interested in what this actually means. In " @@ -5105,12 +5122,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:526 +#: apt.conf.5.xml:537 msgid "PackageManager::Configure" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:527 +#: apt.conf.5.xml:538 msgid "" "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " "and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default " @@ -5127,12 +5144,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:537 +#: apt.conf.5.xml:548 msgid "DPkg::ConfigurePending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:538 +#: apt.conf.5.xml:549 msgid "" "If this option is set apt will call <command>dpkg --configure " "--pending</command> to let dpkg handle all required configurations and " @@ -5144,12 +5161,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:544 +#: apt.conf.5.xml:555 msgid "DPkg::TriggersPending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:545 +#: apt.conf.5.xml:556 msgid "" "Useful for <literal>smart</literal> configuration as a package which has " "pending triggers is not considered as <literal>installed</literal> and dpkg " @@ -5159,12 +5176,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:550 +#: apt.conf.5.xml:561 msgid "PackageManager::UnpackAll" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:551 +#: apt.conf.5.xml:562 msgid "" "As the configuration can be deferred to be done at the end by dpkg it can be " "tried to order the unpack series only by critical needs, e.g. by " @@ -5176,12 +5193,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:558 +#: apt.conf.5.xml:569 msgid "OrderList::Score::Immediate" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:566 +#: apt.conf.5.xml:577 #, no-wrap msgid "" "OrderList::Score {\n" @@ -5193,7 +5210,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:559 +#: apt.conf.5.xml:570 msgid "" "Essential packages (and there dependencies) should be configured immediately " "after unpacking. It will be a good idea to do this quite early in the " @@ -5207,12 +5224,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:579 +#: apt.conf.5.xml:590 msgid "Periodic and Archives options" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:580 +#: apt.conf.5.xml:591 msgid "" "<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups " "of options configure behavior of apt periodic updates, which is done by " @@ -5221,12 +5238,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:588 +#: apt.conf.5.xml:599 msgid "Debug options" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:590 +#: apt.conf.5.xml:601 msgid "" "Enabling options in the <literal>Debug::</literal> section will cause " "debugging information to be sent to the standard error stream of the program " @@ -5237,7 +5254,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:601 +#: apt.conf.5.xml:612 msgid "" "<literal>Debug::pkgProblemResolver</literal> enables output about the " "decisions made by <literal>dist-upgrade, upgrade, install, remove, " @@ -5245,7 +5262,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:609 +#: apt.conf.5.xml:620 msgid "" "<literal>Debug::NoLocking</literal> disables all file locking. This can be " "used to run some operations (for instance, <literal>apt-get -s " @@ -5253,7 +5270,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:618 +#: apt.conf.5.xml:629 msgid "" "<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each " "time that <literal>apt</literal> invokes &dpkg;." @@ -5263,110 +5280,110 @@ msgstr "" #. motivating example, except I haven't a clue why you'd want #. to do this. #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:626 +#: apt.conf.5.xml:637 msgid "" "<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data " "in CDROM IDs." msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:636 +#: apt.conf.5.xml:647 msgid "A full list of debugging options to apt follows." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:641 +#: apt.conf.5.xml:652 msgid "<literal>Debug::Acquire::cdrom</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:645 +#: apt.conf.5.xml:656 msgid "Print information related to accessing <literal>cdrom://</literal> sources." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:652 +#: apt.conf.5.xml:663 msgid "<literal>Debug::Acquire::ftp</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:656 +#: apt.conf.5.xml:667 msgid "Print information related to downloading packages using FTP." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:663 +#: apt.conf.5.xml:674 msgid "<literal>Debug::Acquire::http</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:667 +#: apt.conf.5.xml:678 msgid "Print information related to downloading packages using HTTP." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:674 +#: apt.conf.5.xml:685 msgid "<literal>Debug::Acquire::https</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:678 +#: apt.conf.5.xml:689 msgid "Print information related to downloading packages using HTTPS." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:685 +#: apt.conf.5.xml:696 msgid "<literal>Debug::Acquire::gpgv</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:689 +#: apt.conf.5.xml:700 msgid "" "Print information related to verifying cryptographic signatures using " "<literal>gpg</literal>." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:696 +#: apt.conf.5.xml:707 msgid "<literal>Debug::aptcdrom</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:700 +#: apt.conf.5.xml:711 msgid "" "Output information about the process of accessing collections of packages " "stored on CD-ROMs." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:707 +#: apt.conf.5.xml:718 msgid "<literal>Debug::BuildDeps</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:710 +#: apt.conf.5.xml:721 msgid "Describes the process of resolving build-dependencies in &apt-get;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:717 +#: apt.conf.5.xml:728 msgid "<literal>Debug::Hashes</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:720 +#: apt.conf.5.xml:731 msgid "" "Output each cryptographic hash that is generated by the " "<literal>apt</literal> libraries." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:727 +#: apt.conf.5.xml:738 msgid "<literal>Debug::IdentCDROM</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:730 +#: apt.conf.5.xml:741 msgid "" "Do not include information from <literal>statfs</literal>, namely the number " "of used and free blocks on the CD-ROM filesystem, when generating an ID for " @@ -5374,92 +5391,92 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:738 +#: apt.conf.5.xml:749 msgid "<literal>Debug::NoLocking</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:741 +#: apt.conf.5.xml:752 msgid "" "Disable all file locking. For instance, this will allow two instances of " "<quote><literal>apt-get update</literal></quote> to run at the same time." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:749 +#: apt.conf.5.xml:760 msgid "<literal>Debug::pkgAcquire</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:753 +#: apt.conf.5.xml:764 msgid "Log when items are added to or removed from the global download queue." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:760 +#: apt.conf.5.xml:771 msgid "<literal>Debug::pkgAcquire::Auth</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:763 +#: apt.conf.5.xml:774 msgid "" "Output status messages and errors related to verifying checksums and " "cryptographic signatures of downloaded files." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:770 +#: apt.conf.5.xml:781 msgid "<literal>Debug::pkgAcquire::Diffs</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:773 +#: apt.conf.5.xml:784 msgid "" "Output information about downloading and applying package index list diffs, " "and errors relating to package index list diffs." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:781 +#: apt.conf.5.xml:792 msgid "<literal>Debug::pkgAcquire::RRed</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:785 +#: apt.conf.5.xml:796 msgid "" "Output information related to patching apt package lists when downloading " "index diffs instead of full indices." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:792 +#: apt.conf.5.xml:803 msgid "<literal>Debug::pkgAcquire::Worker</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:796 +#: apt.conf.5.xml:807 msgid "Log all interactions with the sub-processes that actually perform downloads." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:803 +#: apt.conf.5.xml:814 msgid "<literal>Debug::pkgAutoRemove</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:807 +#: apt.conf.5.xml:818 msgid "" "Log events related to the automatically-installed status of packages and to " "the removal of unused packages." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:814 +#: apt.conf.5.xml:825 msgid "<literal>Debug::pkgDepCache::AutoInstall</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:817 +#: apt.conf.5.xml:828 msgid "" "Generate debug messages describing which packages are being automatically " "installed to resolve dependencies. This corresponds to the initial " @@ -5469,12 +5486,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:828 +#: apt.conf.5.xml:839 msgid "<literal>Debug::pkgDepCache::Marker</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:831 +#: apt.conf.5.xml:842 msgid "" "Generate debug messages describing which package is marked as " "keep/install/remove while the ProblemResolver does his work. Each addition " @@ -5492,90 +5509,90 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:850 +#: apt.conf.5.xml:861 msgid "<literal>Debug::pkgInitConfig</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:853 +#: apt.conf.5.xml:864 msgid "Dump the default configuration to standard error on startup." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:860 +#: apt.conf.5.xml:871 msgid "<literal>Debug::pkgDPkgPM</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:863 +#: apt.conf.5.xml:874 msgid "" "When invoking &dpkg;, output the precise command line with which it is being " "invoked, with arguments separated by a single space character." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:871 +#: apt.conf.5.xml:882 msgid "<literal>Debug::pkgDPkgProgressReporting</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:874 +#: apt.conf.5.xml:885 msgid "" "Output all the data received from &dpkg; on the status file descriptor and " "any errors encountered while parsing it." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:881 +#: apt.conf.5.xml:892 msgid "<literal>Debug::pkgOrderList</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:885 +#: apt.conf.5.xml:896 msgid "" "Generate a trace of the algorithm that decides the order in which " "<literal>apt</literal> should pass packages to &dpkg;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:893 +#: apt.conf.5.xml:904 msgid "<literal>Debug::pkgPackageManager</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:897 +#: apt.conf.5.xml:908 msgid "Output status messages tracing the steps performed when invoking &dpkg;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:904 +#: apt.conf.5.xml:915 msgid "<literal>Debug::pkgPolicy</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:908 +#: apt.conf.5.xml:919 msgid "Output the priority of each package list on startup." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:914 +#: apt.conf.5.xml:925 msgid "<literal>Debug::pkgProblemResolver</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:918 +#: apt.conf.5.xml:929 msgid "" "Trace the execution of the dependency resolver (this applies only to what " "happens when a complex dependency problem is encountered)." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:926 +#: apt.conf.5.xml:937 msgid "<literal>Debug::pkgProblemResolver::ShowScores</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:929 +#: apt.conf.5.xml:940 msgid "" "Display a list of all installed packages with their calculated score used by " "the pkgProblemResolver. The description of the package is the same as " @@ -5583,32 +5600,32 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:937 +#: apt.conf.5.xml:948 msgid "<literal>Debug::sourceList</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:941 +#: apt.conf.5.xml:952 msgid "" "Print information about the vendors read from " "<filename>/etc/apt/vendors.list</filename>." msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:963 +#: apt.conf.5.xml:974 msgid "" "&configureindex; is a configuration file showing example values for all " "possible options." msgstr "" #. type: Content of: <refentry><refsect1><variablelist> -#: apt.conf.5.xml:970 +#: apt.conf.5.xml:981 msgid "&file-aptconf;" msgstr "" #. ? reading apt.conf #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:975 +#: apt.conf.5.xml:986 msgid "&apt-cache;, &apt-config;, &apt-preferences;." msgstr "" diff --git a/doc/po/fr.po b/doc/po/fr.po index 738408312..ba229a6e3 100644 --- a/doc/po/fr.po +++ b/doc/po/fr.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" -"POT-Creation-Date: 2009-10-01 18:09+0300\n" +"POT-Creation-Date: 2009-10-01 20:13+0300\n" "PO-Revision-Date: 2009-09-26 19:25+0200\n" "Last-Translator: Christian Perrier <bubulle@debian.org>\n" "Language-Team: French <debian-l10n-french@lists.debian.org>\n" @@ -1677,7 +1677,7 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt-cache.8.xml:281 apt-config.8.xml:93 apt-extracttemplates.1.xml:56 #: apt-ftparchive.1.xml:492 apt-get.8.xml:319 apt-mark.8.xml:89 -#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:436 apt.conf.5.xml:458 +#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:447 apt.conf.5.xml:469 msgid "options" msgstr "options" @@ -1923,7 +1923,7 @@ msgstr "&apt-commonoptions;" #. type: Content of: <refentry><refsect1><title> #: apt-cache.8.xml:361 apt-get.8.xml:559 apt-key.8.xml:138 apt-mark.8.xml:122 -#: apt.conf.5.xml:968 apt_preferences.5.xml:615 +#: apt.conf.5.xml:979 apt_preferences.5.xml:615 msgid "Files" msgstr "Fichiers" @@ -1936,7 +1936,7 @@ msgstr "&file-sourceslist; &file-statelists;" #: apt-cache.8.xml:368 apt-cdrom.8.xml:155 apt-config.8.xml:103 #: apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:563 apt-get.8.xml:569 #: apt-key.8.xml:162 apt-mark.8.xml:133 apt-secure.8.xml:181 -#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:974 apt_preferences.5.xml:622 +#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:985 apt_preferences.5.xml:622 #: sources.list.5.xml:221 msgid "See Also" msgstr "Voir aussi" @@ -3523,7 +3523,7 @@ msgstr "" "configuration : <literal>APT::FTPArchive::ReadOnlyDB</literal>." #. type: Content of: <refentry><refsect1><title> -#: apt-ftparchive.1.xml:552 apt.conf.5.xml:962 apt_preferences.5.xml:462 +#: apt-ftparchive.1.xml:552 apt.conf.5.xml:973 apt_preferences.5.xml:462 #: sources.list.5.xml:181 msgid "Examples" msgstr "Exemples" @@ -5842,26 +5842,37 @@ msgstr "Immediate-Configure" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml:154 msgid "" -"Disable Immediate Configuration; This dangerous option disables some of " -"APT's ordering code to cause it to make fewer dpkg calls. Doing so may be " -"necessary on some extremely slow single user systems but is very dangerous " -"and may cause package install scripts to fail or worse. Use at your own " -"risk." -msgstr "" -"Désactive la configuration immédiate ; cette dangereuse option désactive une " -"partie du code de mise en ordre de APT pour que ce dernier effectue le moins " -"d'appels possible à &dpkg;. Ça peut être nécessaire sur des systèmes à un " -"seul utilisateur extrêmement lents, mais cette option est très dangereuse et " -"peut faire échouer les scripts d'installation, voire pire. Utilisez-la à " -"vos risques et périls." - -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:161 +"Defaults to on which will cause APT to install essential and important " +"packages as fast as possible in the install/upgrade operation. This is done " +"to limit the effect of a failing &dpkg; call: If this option is disabled APT " +"doesn't treat an important package in the same way as an extra package: " +"Between the unpacking of the important package A and his configuration can " +"then be many other unpack or configuration calls, e.g. for package B which " +"has no relation to A, but causes the dpkg call to fail (e.g. because " +"maintainer script of package B generates an error) which results in a system " +"state in which package A is unpacked but unconfigured - each package " +"depending on A is now no longer guaranteed to work as their dependency on A " +"is not longer satisfied. The immediate configuration marker is also applied " +"to all dependencies which can generate a problem if the dependencies e.g. " +"form a circle as a dependency with the immediate flag is comparable with a " +"Pre-Dependency. So in theory it is possible that APT encounters a situation " +"in which it is unable to perform immediate configuration, error out and " +"refers to this option so the user can deactivate the immediate configuration " +"temporary to be able to perform an install/upgrade again. Note the use of " +"the word \"theory\" here as this problem was only encountered by now in real " +"world a few times in non-stable distribution versions and caused by wrong " +"dependencies of the package in question, so you should not blindly disable " +"this option as the mentioned scenario above is not the only problem " +"immediate configuration can help to prevent in the first place." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:172 msgid "Force-LoopBreak" msgstr "Force-LoopBreak" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:162 +#: apt.conf.5.xml:173 msgid "" "Never Enable this option unless you -really- know what you are doing. It " "permits APT to temporarily remove an essential package to break a Conflicts/" @@ -5879,12 +5890,12 @@ msgstr "" "ces paquets dépendent." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:170 +#: apt.conf.5.xml:181 msgid "Cache-Limit" msgstr "Cache-Limit" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:171 +#: apt.conf.5.xml:182 msgid "" "APT uses a fixed size memory mapped cache file to store the 'available' " "information. This sets the size of that cache (in bytes)." @@ -5894,24 +5905,24 @@ msgstr "" "mémoire allouée pour le chargement de ce cache." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:175 +#: apt.conf.5.xml:186 msgid "Build-Essential" msgstr "Build-Essential" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:176 +#: apt.conf.5.xml:187 msgid "Defines which package(s) are considered essential build dependencies." msgstr "" "Cette option définit les paquets qui sont considérés comme faisant partie " "des dépendances essentielles pour la construction de paquets." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:179 +#: apt.conf.5.xml:190 msgid "Get" msgstr "Get" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:180 +#: apt.conf.5.xml:191 msgid "" "The Get subsection controls the &apt-get; tool, please see its documentation " "for more information about the options here." @@ -5921,12 +5932,12 @@ msgstr "" "question." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:184 +#: apt.conf.5.xml:195 msgid "Cache" msgstr "Cache" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:185 +#: apt.conf.5.xml:196 msgid "" "The Cache subsection controls the &apt-cache; tool, please see its " "documentation for more information about the options here." @@ -5936,12 +5947,12 @@ msgstr "" "options en question." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:189 +#: apt.conf.5.xml:200 msgid "CDROM" msgstr "CDROM" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:190 +#: apt.conf.5.xml:201 msgid "" "The CDROM subsection controls the &apt-cdrom; tool, please see its " "documentation for more information about the options here." @@ -5951,17 +5962,17 @@ msgstr "" "options en question." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:196 +#: apt.conf.5.xml:207 msgid "The Acquire Group" msgstr "Le groupe Acquire" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:201 +#: apt.conf.5.xml:212 msgid "PDiffs" msgstr "PDiffs" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:202 +#: apt.conf.5.xml:213 msgid "" "Try to download deltas called <literal>PDiffs</literal> for Packages or " "Sources files instead of downloading whole ones. True by default." @@ -5971,12 +5982,12 @@ msgstr "" "télécharger entièrement. Par défaut à « true »." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:207 +#: apt.conf.5.xml:218 msgid "Queue-Mode" msgstr "Queue-Mode" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:208 +#: apt.conf.5.xml:219 msgid "" "Queuing mode; <literal>Queue-Mode</literal> can be one of <literal>host</" "literal> or <literal>access</literal> which determines how APT parallelizes " @@ -5992,12 +6003,12 @@ msgstr "" "initiée." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:215 +#: apt.conf.5.xml:226 msgid "Retries" msgstr "Retries" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:216 +#: apt.conf.5.xml:227 msgid "" "Number of retries to perform. If this is non-zero APT will retry failed " "files the given number of times." @@ -6007,12 +6018,12 @@ msgstr "" "échoué." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:220 +#: apt.conf.5.xml:231 msgid "Source-Symlinks" msgstr "Source-Symlinks" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:221 +#: apt.conf.5.xml:232 msgid "" "Use symlinks for source archives. If set to true then source archives will " "be symlinked when possible instead of copying. True is the default." @@ -6022,12 +6033,12 @@ msgstr "" "archives de sources au lieu de les copier. Par défaut à « true »." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:225 sources.list.5.xml:139 +#: apt.conf.5.xml:236 sources.list.5.xml:139 msgid "http" msgstr "http" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:226 +#: apt.conf.5.xml:237 #, fuzzy #| msgid "" #| "HTTP URIs; http::Proxy is the default http proxy to use. It is in the " @@ -6054,7 +6065,7 @@ msgstr "" "les options de mandataire HTTP." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:234 +#: apt.conf.5.xml:245 msgid "" "Three settings are provided for cache control with HTTP/1.1 compliant proxy " "caches. <literal>No-Cache</literal> tells the proxy to not use its cached " @@ -6079,7 +6090,7 @@ msgstr "" "en compte aucune de ces options." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:244 apt.conf.5.xml:301 +#: apt.conf.5.xml:255 apt.conf.5.xml:312 msgid "" "The option <literal>timeout</literal> sets the timeout timer used by the " "method, this applies to all things including connection timeout and data " @@ -6089,7 +6100,7 @@ msgstr "" "(timeout) utilisé par la méthode. Cela vaut pour tout, connexion et données." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:247 +#: apt.conf.5.xml:258 msgid "" "One setting is provided to control the pipeline depth in cases where the " "remote server is not RFC conforming or buggy (such as Squid 2.0.2) " @@ -6109,7 +6120,7 @@ msgstr "" "option ne respectent pas la RFC 2068." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:255 +#: apt.conf.5.xml:266 msgid "" "The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</" "literal> which accepts integer values in kilobyte. The default value is 0 " @@ -6119,12 +6130,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:261 +#: apt.conf.5.xml:272 msgid "https" msgstr "https" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:262 +#: apt.conf.5.xml:273 msgid "" "HTTPS URIs. Cache-control and proxy options are the same as for " "<literal>http</literal> method. <literal>Pipeline-Depth</literal> option is " @@ -6135,7 +6146,7 @@ msgstr "" "<literal>Pipeline-Depth</literal> n'est pas encore supportée." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:266 +#: apt.conf.5.xml:277 msgid "" "<literal>CaInfo</literal> suboption specifies place of file that holds info " "about trusted certificates. <literal><host>::CaInfo</literal> is " @@ -6167,12 +6178,12 @@ msgstr "" "ou 'SSLv3'." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:284 sources.list.5.xml:150 +#: apt.conf.5.xml:295 sources.list.5.xml:150 msgid "ftp" msgstr "ftp" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:285 +#: apt.conf.5.xml:296 #, fuzzy #| msgid "" #| "FTP URIs; ftp::Proxy is the default proxy server to use. It is in the " @@ -6220,7 +6231,7 @@ msgstr "" "respectif de l'URI." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:304 +#: apt.conf.5.xml:315 msgid "" "Several settings are provided to control passive mode. Generally it is safe " "to leave passive mode on, it works in nearly every environment. However " @@ -6237,7 +6248,7 @@ msgstr "" "modèle de fichier de configuration)." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:311 +#: apt.conf.5.xml:322 msgid "" "It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</" "envar> environment variable to a http url - see the discussion of the http " @@ -6252,7 +6263,7 @@ msgstr "" "de cette méthode." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:316 +#: apt.conf.5.xml:327 msgid "" "The setting <literal>ForceExtended</literal> controls the use of RFC2428 " "<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is " @@ -6268,18 +6279,18 @@ msgstr "" "des serveurs FTP ne suivent pas la RFC 2428." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:323 sources.list.5.xml:132 +#: apt.conf.5.xml:334 sources.list.5.xml:132 msgid "cdrom" msgstr "cdrom" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:329 +#: apt.conf.5.xml:340 #, no-wrap msgid "\"/cdrom/\"::Mount \"foo\";" msgstr "\"/cdrom/\"::Mount \"foo\";" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:324 +#: apt.conf.5.xml:335 msgid "" "CDROM URIs; the only setting for CDROM URIs is the mount point, " "<literal>cdrom::Mount</literal> which must be the mount point for the CDROM " @@ -6301,12 +6312,12 @@ msgstr "" "spécifiées en utilisant <literal>UMount</literal>." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:334 +#: apt.conf.5.xml:345 msgid "gpgv" msgstr "gpgv" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:335 +#: apt.conf.5.xml:346 msgid "" "GPGV URIs; the only option for GPGV URIs is the option to pass additional " "parameters to gpgv. <literal>gpgv::Options</literal> Additional options " @@ -6317,18 +6328,18 @@ msgstr "" "supplémentaires passées à gpgv." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:340 +#: apt.conf.5.xml:351 msgid "CompressionTypes" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:346 +#: apt.conf.5.xml:357 #, no-wrap msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:341 +#: apt.conf.5.xml:352 msgid "" "List of compression types which are understood by the acquire methods. " "Files like <filename>Packages</filename> can be available in various " @@ -6340,19 +6351,19 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:351 +#: apt.conf.5.xml:362 #, no-wrap msgid "Acquire::CompressionTypes::Order:: \"gz\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:354 +#: apt.conf.5.xml:365 #, no-wrap msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:347 +#: apt.conf.5.xml:358 msgid "" "Also the <literal>Order</literal> subgroup can be used to define in which " "order the acquire system will try to download the compressed files. The " @@ -6369,13 +6380,13 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:358 +#: apt.conf.5.xml:369 #, no-wrap msgid "Dir::Bin::bzip2 \"/bin/bzip2\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:356 +#: apt.conf.5.xml:367 msgid "" "Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</" "replaceable></literal> will be checked: If this setting exists the method " @@ -6390,7 +6401,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:363 +#: apt.conf.5.xml:374 msgid "" "While it is possible to add an empty compression type to the order list, but " "APT in its current version doesn't understand it correctly and will display " @@ -6400,7 +6411,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:197 +#: apt.conf.5.xml:208 msgid "" "The <literal>Acquire</literal> group of options controls the download of " "packages and the URI handlers. <placeholder type=\"variablelist\" id=\"0\"/>" @@ -6410,12 +6421,12 @@ msgstr "" "id=\"0\"/>" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:372 +#: apt.conf.5.xml:383 msgid "Directories" msgstr "Les répertoires" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:374 +#: apt.conf.5.xml:385 msgid "" "The <literal>Dir::State</literal> section has directories that pertain to " "local state information. <literal>lists</literal> is the directory to place " @@ -6435,7 +6446,7 @@ msgstr "" "filename>." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:381 +#: apt.conf.5.xml:392 msgid "" "<literal>Dir::Cache</literal> contains locations pertaining to local cache " "information, such as the two package caches <literal>srcpkgcache</literal> " @@ -6458,7 +6469,7 @@ msgstr "" "literal>." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:390 +#: apt.conf.5.xml:401 msgid "" "<literal>Dir::Etc</literal> contains the location of configuration files, " "<literal>sourcelist</literal> gives the location of the sourcelist and " @@ -6473,7 +6484,7 @@ msgstr "" "fichier de configuration indiqué par la variable <envar>APT_CONFIG</envar>)." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:396 +#: apt.conf.5.xml:407 msgid "" "The <literal>Dir::Parts</literal> setting reads in all the config fragments " "in lexical order from the directory specified. After this is done then the " @@ -6484,7 +6495,7 @@ msgstr "" "configuration est chargé." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:400 +#: apt.conf.5.xml:411 #, fuzzy #| msgid "" #| "Binary programs are pointed to by <literal>Dir::Bin</literal>. " @@ -6509,7 +6520,7 @@ msgstr "" "l'emplacement des programmes correspondants." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:408 +#: apt.conf.5.xml:419 msgid "" "The configuration item <literal>RootDir</literal> has a special meaning. If " "set, all paths in <literal>Dir::</literal> will be relative to " @@ -6531,12 +6542,12 @@ msgstr "" "staging/var/lib/dpkg/status</filename>." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:421 +#: apt.conf.5.xml:432 msgid "APT in DSelect" msgstr "APT et DSelect" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:423 +#: apt.conf.5.xml:434 msgid "" "When APT is used as a &dselect; method several configuration directives " "control the default behaviour. These are in the <literal>DSelect</literal> " @@ -6547,12 +6558,12 @@ msgstr "" "<literal>DSelect</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:427 +#: apt.conf.5.xml:438 msgid "Clean" msgstr "Clean" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:428 +#: apt.conf.5.xml:439 msgid "" "Cache Clean mode; this value may be one of always, prompt, auto, pre-auto " "and never. always and prompt will remove all packages from the cache after " @@ -6570,7 +6581,7 @@ msgstr "" "supprime avant de récupérer de nouveaux paquets." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:437 +#: apt.conf.5.xml:448 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the install phase." @@ -6579,12 +6590,12 @@ msgstr "" "&apt-get; lors de la phase d'installation." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:441 +#: apt.conf.5.xml:452 msgid "Updateoptions" msgstr "UpdateOptions" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:442 +#: apt.conf.5.xml:453 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the update phase." @@ -6593,12 +6604,12 @@ msgstr "" "&apt-get; lors de la phase de mise à jour." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:446 +#: apt.conf.5.xml:457 msgid "PromptAfterUpdate" msgstr "PromptAfterUpdate" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:447 +#: apt.conf.5.xml:458 msgid "" "If true the [U]pdate operation in &dselect; will always prompt to continue. " "The default is to prompt only on error." @@ -6608,12 +6619,12 @@ msgstr "" "d'erreur que l'on propose à l'utilisateur d'intervenir." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:453 +#: apt.conf.5.xml:464 msgid "How APT calls dpkg" msgstr "Méthode d'appel de &dpkg; par APT" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:454 +#: apt.conf.5.xml:465 msgid "" "Several configuration directives control how APT invokes &dpkg;. These are " "in the <literal>DPkg</literal> section." @@ -6622,7 +6633,7 @@ msgstr "" "&dpkg; : elles figurent dans la section <literal>DPkg</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:459 +#: apt.conf.5.xml:470 msgid "" "This is a list of options to pass to dpkg. The options must be specified " "using the list notation and each list item is passed as a single argument to " @@ -6633,17 +6644,17 @@ msgstr "" "est passé comme un seul paramètre à &dpkg;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:464 +#: apt.conf.5.xml:475 msgid "Pre-Invoke" msgstr "Pre-Invoke" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:464 +#: apt.conf.5.xml:475 msgid "Post-Invoke" msgstr "Post-Invoke" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:465 +#: apt.conf.5.xml:476 msgid "" "This is a list of shell commands to run before/after invoking &dpkg;. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -6656,12 +6667,12 @@ msgstr "" "<filename>/bin/sh</filename> : APT s'arrête dès que l'une d'elles échoue." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:471 +#: apt.conf.5.xml:482 msgid "Pre-Install-Pkgs" msgstr "Pre-Install-Pkgs" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:472 +#: apt.conf.5.xml:483 msgid "" "This is a list of shell commands to run before invoking dpkg. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -6677,7 +6688,7 @@ msgstr "" "qu'il va installer, à raison d'un par ligne." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:478 +#: apt.conf.5.xml:489 msgid "" "Version 2 of this protocol dumps more information, including the protocol " "version, the APT configuration space and the packages, files and versions " @@ -6693,12 +6704,12 @@ msgstr "" "literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:485 +#: apt.conf.5.xml:496 msgid "Run-Directory" msgstr "Run-Directory" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:486 +#: apt.conf.5.xml:497 msgid "" "APT chdirs to this directory before invoking dpkg, the default is <filename>/" "</filename>." @@ -6707,12 +6718,12 @@ msgstr "" "le répertoire <filename>/</filename>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:490 +#: apt.conf.5.xml:501 msgid "Build-options" msgstr "Build-options" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:491 +#: apt.conf.5.xml:502 msgid "" "These options are passed to &dpkg-buildpackage; when compiling packages, the " "default is to disable signing and produce all binaries." @@ -6722,12 +6733,12 @@ msgstr "" "créés." #. type: Content of: <refentry><refsect1><refsect2><title> -#: apt.conf.5.xml:496 +#: apt.conf.5.xml:507 msgid "dpkg trigger usage (and related options)" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:497 +#: apt.conf.5.xml:508 msgid "" "APT can call dpkg in a way so it can make aggressive use of triggers over " "multiply calls of dpkg. Without further options dpkg will use triggers only " @@ -6742,7 +6753,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para><literallayout> -#: apt.conf.5.xml:512 +#: apt.conf.5.xml:523 #, no-wrap msgid "" "DPkg::NoTriggers \"true\";\n" @@ -6752,7 +6763,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:506 +#: apt.conf.5.xml:517 msgid "" "Note that it is not guaranteed that APT will support these options or that " "these options will not cause (big) trouble in the future. If you have " @@ -6766,12 +6777,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:518 +#: apt.conf.5.xml:529 msgid "DPkg::NoTriggers" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:519 +#: apt.conf.5.xml:530 msgid "" "Add the no triggers flag to all dpkg calls (expect the ConfigurePending " "call). See &dpkg; if you are interested in what this actually means. In " @@ -6783,14 +6794,14 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:526 +#: apt.conf.5.xml:537 #, fuzzy #| msgid "Packages::Compress" msgid "PackageManager::Configure" msgstr "Packages::Compress" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:527 +#: apt.conf.5.xml:538 msgid "" "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " "and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default " @@ -6806,12 +6817,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:537 +#: apt.conf.5.xml:548 msgid "DPkg::ConfigurePending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:538 +#: apt.conf.5.xml:549 msgid "" "If this option is set apt will call <command>dpkg --configure --pending</" "command> to let dpkg handle all required configurations and triggers. This " @@ -6822,12 +6833,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:544 +#: apt.conf.5.xml:555 msgid "DPkg::TriggersPending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:545 +#: apt.conf.5.xml:556 msgid "" "Useful for <literal>smart</literal> configuration as a package which has " "pending triggers is not considered as <literal>installed</literal> and dpkg " @@ -6837,12 +6848,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:550 +#: apt.conf.5.xml:561 msgid "PackageManager::UnpackAll" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:551 +#: apt.conf.5.xml:562 msgid "" "As the configuration can be deferred to be done at the end by dpkg it can be " "tried to order the unpack series only by critical needs, e.g. by Pre-" @@ -6854,12 +6865,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:558 +#: apt.conf.5.xml:569 msgid "OrderList::Score::Immediate" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:566 +#: apt.conf.5.xml:577 #, no-wrap msgid "" "OrderList::Score {\n" @@ -6871,7 +6882,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:559 +#: apt.conf.5.xml:570 msgid "" "Essential packages (and there dependencies) should be configured immediately " "after unpacking. It will be a good idea to do this quite early in the " @@ -6885,12 +6896,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:579 +#: apt.conf.5.xml:590 msgid "Periodic and Archives options" msgstr "Options « Periodic » et « Archive »" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:580 +#: apt.conf.5.xml:591 msgid "" "<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups " "of options configure behavior of apt periodic updates, which is done by " @@ -6902,12 +6913,12 @@ msgstr "" "script <literal>/etc/cron.daily/apt</literal>, lancé quotidiennement." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:588 +#: apt.conf.5.xml:599 msgid "Debug options" msgstr "Les options de débogage" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:590 +#: apt.conf.5.xml:601 msgid "" "Enabling options in the <literal>Debug::</literal> section will cause " "debugging information to be sent to the standard error stream of the program " @@ -6925,7 +6936,7 @@ msgstr "" "peuvent tout de même être utiles :" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:601 +#: apt.conf.5.xml:612 msgid "" "<literal>Debug::pkgProblemResolver</literal> enables output about the " "decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</" @@ -6936,7 +6947,7 @@ msgstr "" "upgrade, upgrade, install, remove et purge</literal>." #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:609 +#: apt.conf.5.xml:620 msgid "" "<literal>Debug::NoLocking</literal> disables all file locking. This can be " "used to run some operations (for instance, <literal>apt-get -s install</" @@ -6948,7 +6959,7 @@ msgstr "" "superutilisateur." #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:618 +#: apt.conf.5.xml:629 msgid "" "<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each " "time that <literal>apt</literal> invokes &dpkg;." @@ -6960,7 +6971,7 @@ msgstr "" #. motivating example, except I haven't a clue why you'd want #. to do this. #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:626 +#: apt.conf.5.xml:637 msgid "" "<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data " "in CDROM IDs." @@ -6969,17 +6980,17 @@ msgstr "" "type statfs dans les identifiants de CD." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:636 +#: apt.conf.5.xml:647 msgid "A full list of debugging options to apt follows." msgstr "Liste complète des options de débogage de APT :" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:641 +#: apt.conf.5.xml:652 msgid "<literal>Debug::Acquire::cdrom</literal>" msgstr "<literal>Debug::Acquire::cdrom</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:645 +#: apt.conf.5.xml:656 msgid "" "Print information related to accessing <literal>cdrom://</literal> sources." msgstr "" @@ -6987,44 +6998,44 @@ msgstr "" "literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:652 +#: apt.conf.5.xml:663 msgid "<literal>Debug::Acquire::ftp</literal>" msgstr "<literal>Debug::Acquire::ftp</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:656 +#: apt.conf.5.xml:667 msgid "Print information related to downloading packages using FTP." msgstr "" "Affiche les informations concernant le téléchargement de paquets par FTP." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:663 +#: apt.conf.5.xml:674 msgid "<literal>Debug::Acquire::http</literal>" msgstr "<literal>Debug::Acquire::http</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:667 +#: apt.conf.5.xml:678 msgid "Print information related to downloading packages using HTTP." msgstr "" "Affiche les informations concernant le téléchargement de paquets par HTTP." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:674 +#: apt.conf.5.xml:685 msgid "<literal>Debug::Acquire::https</literal>" msgstr "<literal>Debug::Acquire::https</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:678 +#: apt.conf.5.xml:689 msgid "Print information related to downloading packages using HTTPS." msgstr "Print information related to downloading packages using HTTPS." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:685 +#: apt.conf.5.xml:696 msgid "<literal>Debug::Acquire::gpgv</literal>" msgstr "<literal>Debug::Acquire::gpgv</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:689 +#: apt.conf.5.xml:700 msgid "" "Print information related to verifying cryptographic signatures using " "<literal>gpg</literal>." @@ -7033,12 +7044,12 @@ msgstr "" "cryptographiques avec <literal>gpg</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:696 +#: apt.conf.5.xml:707 msgid "<literal>Debug::aptcdrom</literal>" msgstr "<literal>Debug::aptcdrom</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:700 +#: apt.conf.5.xml:711 msgid "" "Output information about the process of accessing collections of packages " "stored on CD-ROMs." @@ -7047,24 +7058,24 @@ msgstr "" "stockées sur CD." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:707 +#: apt.conf.5.xml:718 msgid "<literal>Debug::BuildDeps</literal>" msgstr "<literal>Debug::BuildDeps</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:710 +#: apt.conf.5.xml:721 msgid "Describes the process of resolving build-dependencies in &apt-get;." msgstr "" "Décrit le processus de résolution des dépendances pour la construction de " "paquets source ( « build-dependencies » ) par &apt-get;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:717 +#: apt.conf.5.xml:728 msgid "<literal>Debug::Hashes</literal>" msgstr "<literal>Debug::Hashes</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:720 +#: apt.conf.5.xml:731 msgid "" "Output each cryptographic hash that is generated by the <literal>apt</" "literal> libraries." @@ -7073,12 +7084,12 @@ msgstr "" "librairies d'<literal>apt</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:727 +#: apt.conf.5.xml:738 msgid "<literal>Debug::IdentCDROM</literal>" msgstr "<literal>Debug::IdentCDROM</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:730 +#: apt.conf.5.xml:741 msgid "" "Do not include information from <literal>statfs</literal>, namely the number " "of used and free blocks on the CD-ROM filesystem, when generating an ID for " @@ -7089,12 +7100,12 @@ msgstr "" "utilisés sur le système de fichier du CD." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:738 +#: apt.conf.5.xml:749 msgid "<literal>Debug::NoLocking</literal>" msgstr "<literal>Debug::NoLocking</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:741 +#: apt.conf.5.xml:752 msgid "" "Disable all file locking. For instance, this will allow two instances of " "<quote><literal>apt-get update</literal></quote> to run at the same time." @@ -7104,24 +7115,24 @@ msgstr "" "temps." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:749 +#: apt.conf.5.xml:760 msgid "<literal>Debug::pkgAcquire</literal>" msgstr "<literal>Debug::pkgAcquire</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:753 +#: apt.conf.5.xml:764 msgid "Log when items are added to or removed from the global download queue." msgstr "" "Trace les ajouts et suppressions d'éléments de la queue globale de " "téléchargement." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:760 +#: apt.conf.5.xml:771 msgid "<literal>Debug::pkgAcquire::Auth</literal>" msgstr "<literal>Debug::pkgAcquire::Auth</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:763 +#: apt.conf.5.xml:774 msgid "" "Output status messages and errors related to verifying checksums and " "cryptographic signatures of downloaded files." @@ -7131,12 +7142,12 @@ msgstr "" "éventuelles." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:770 +#: apt.conf.5.xml:781 msgid "<literal>Debug::pkgAcquire::Diffs</literal>" msgstr "<literal>Debug::pkgAcquire::Diffs</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:773 +#: apt.conf.5.xml:784 msgid "" "Output information about downloading and applying package index list diffs, " "and errors relating to package index list diffs." @@ -7146,12 +7157,12 @@ msgstr "" "éventuelles." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:781 +#: apt.conf.5.xml:792 msgid "<literal>Debug::pkgAcquire::RRed</literal>" msgstr "<literal>Debug::pkgAcquire::RRed</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:785 +#: apt.conf.5.xml:796 msgid "" "Output information related to patching apt package lists when downloading " "index diffs instead of full indices." @@ -7161,12 +7172,12 @@ msgstr "" "place des fichiers complets." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:792 +#: apt.conf.5.xml:803 msgid "<literal>Debug::pkgAcquire::Worker</literal>" msgstr "<literal>Debug::pkgAcquire::Worker</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:796 +#: apt.conf.5.xml:807 msgid "" "Log all interactions with the sub-processes that actually perform downloads." msgstr "" @@ -7174,12 +7185,12 @@ msgstr "" "effectivement des téléchargements." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:803 +#: apt.conf.5.xml:814 msgid "<literal>Debug::pkgAutoRemove</literal>" msgstr "<literal>Debug::pkgAutoRemove</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:807 +#: apt.conf.5.xml:818 msgid "" "Log events related to the automatically-installed status of packages and to " "the removal of unused packages." @@ -7188,12 +7199,12 @@ msgstr "" "automatiquement, et la suppression des paquets inutiles." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:814 +#: apt.conf.5.xml:825 msgid "<literal>Debug::pkgDepCache::AutoInstall</literal>" msgstr "<literal>Debug::pkgDepCache::AutoInstall</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:817 +#: apt.conf.5.xml:828 msgid "" "Generate debug messages describing which packages are being automatically " "installed to resolve dependencies. This corresponds to the initial auto-" @@ -7208,12 +7219,12 @@ msgstr "" "de APT ; voir <literal>Debug::pkgProblemResolver</literal> pour ce dernier." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:828 +#: apt.conf.5.xml:839 msgid "<literal>Debug::pkgDepCache::Marker</literal>" msgstr "<literal>Debug::pkgDepCache::Marker</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:831 +#: apt.conf.5.xml:842 msgid "" "Generate debug messages describing which package is marked as keep/install/" "remove while the ProblemResolver does his work. Each addition or deletion " @@ -7248,24 +7259,24 @@ msgstr "" "de APT ; voir <literal>Debug::pkgProblemResolver</literal> pour ce dernier." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:850 +#: apt.conf.5.xml:861 msgid "<literal>Debug::pkgInitConfig</literal>" msgstr "<literal>Debug::pkgInitConfig</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:853 +#: apt.conf.5.xml:864 msgid "Dump the default configuration to standard error on startup." msgstr "" "Affiche, au lancement, l'ensemble de la configuration sur la sortie d'erreur " "standard." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:860 +#: apt.conf.5.xml:871 msgid "<literal>Debug::pkgDPkgPM</literal>" msgstr "<literal>Debug::pkgDPkgPM</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:863 +#: apt.conf.5.xml:874 msgid "" "When invoking &dpkg;, output the precise command line with which it is being " "invoked, with arguments separated by a single space character." @@ -7274,12 +7285,12 @@ msgstr "" "paramètres sont séparés par des espaces." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:871 +#: apt.conf.5.xml:882 msgid "<literal>Debug::pkgDPkgProgressReporting</literal>" msgstr "<literal>Debug::pkgDPkgProgressReporting</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:874 +#: apt.conf.5.xml:885 msgid "" "Output all the data received from &dpkg; on the status file descriptor and " "any errors encountered while parsing it." @@ -7289,12 +7300,12 @@ msgstr "" "fichier." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:881 +#: apt.conf.5.xml:892 msgid "<literal>Debug::pkgOrderList</literal>" msgstr "<literal>Debug::pkgOrderList</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:885 +#: apt.conf.5.xml:896 msgid "" "Generate a trace of the algorithm that decides the order in which " "<literal>apt</literal> should pass packages to &dpkg;." @@ -7303,33 +7314,33 @@ msgstr "" "<literal>apt</literal> passe les paquets à &dpkg;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:893 +#: apt.conf.5.xml:904 msgid "<literal>Debug::pkgPackageManager</literal>" msgstr "<literal>Debug::pkgPackageManager</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:897 +#: apt.conf.5.xml:908 msgid "" "Output status messages tracing the steps performed when invoking &dpkg;." msgstr "Affiche le détail des opérations liées à l'invocation de &dpkg;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:904 +#: apt.conf.5.xml:915 msgid "<literal>Debug::pkgPolicy</literal>" msgstr "<literal>Debug::pkgPolicy</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:908 +#: apt.conf.5.xml:919 msgid "Output the priority of each package list on startup." msgstr "Affiche, au lancement, la priorité de chaque liste de paquets." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:914 +#: apt.conf.5.xml:925 msgid "<literal>Debug::pkgProblemResolver</literal>" msgstr "<literal>Debug::pkgProblemResolver</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:918 +#: apt.conf.5.xml:929 msgid "" "Trace the execution of the dependency resolver (this applies only to what " "happens when a complex dependency problem is encountered)." @@ -7338,12 +7349,12 @@ msgstr "" "concerne que les cas où un problème de dépendances complexe se présente)." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:926 +#: apt.conf.5.xml:937 msgid "<literal>Debug::pkgProblemResolver::ShowScores</literal>" msgstr "<literal>Debug::pkgProblemResolver::ShowScores</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:929 +#: apt.conf.5.xml:940 msgid "" "Display a list of all installed packages with their calculated score used by " "the pkgProblemResolver. The description of the package is the same as " @@ -7354,12 +7365,12 @@ msgstr "" "est décrite dans <literal>Debug::pkgDepCache::Marker</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:937 +#: apt.conf.5.xml:948 msgid "<literal>Debug::sourceList</literal>" msgstr "<literal>Debug::sourceList</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:941 +#: apt.conf.5.xml:952 msgid "" "Print information about the vendors read from <filename>/etc/apt/vendors." "list</filename>." @@ -7368,7 +7379,7 @@ msgstr "" "list</filename>." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:963 +#: apt.conf.5.xml:974 msgid "" "&configureindex; is a configuration file showing example values for all " "possible options." @@ -7377,7 +7388,7 @@ msgstr "" "exemples pour toutes les options existantes." #. type: Content of: <refentry><refsect1><variablelist> -#: apt.conf.5.xml:970 +#: apt.conf.5.xml:981 #, fuzzy #| msgid "&apt-conf;" msgid "&file-aptconf;" @@ -7385,7 +7396,7 @@ msgstr "&apt-conf;" #. ? reading apt.conf #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:975 +#: apt.conf.5.xml:986 msgid "&apt-cache;, &apt-config;, &apt-preferences;." msgstr "&apt-cache;, &apt-config;, &apt-preferences;." @@ -10123,6 +10134,20 @@ msgstr "" msgid "Which will use the already fetched archives on the disc." msgstr "" +#~ msgid "" +#~ "Disable Immediate Configuration; This dangerous option disables some of " +#~ "APT's ordering code to cause it to make fewer dpkg calls. Doing so may be " +#~ "necessary on some extremely slow single user systems but is very " +#~ "dangerous and may cause package install scripts to fail or worse. Use at " +#~ "your own risk." +#~ msgstr "" +#~ "Désactive la configuration immédiate ; cette dangereuse option désactive " +#~ "une partie du code de mise en ordre de APT pour que ce dernier effectue " +#~ "le moins d'appels possible à &dpkg;. Ça peut être nécessaire sur des " +#~ "systèmes à un seul utilisateur extrêmement lents, mais cette option est " +#~ "très dangereuse et peut faire échouer les scripts d'installation, voire " +#~ "pire. Utilisez-la à vos risques et périls." + #~ msgid "<filename>/etc/apt/sources.list</filename>" #~ msgstr "<filename>/etc/apt/sources.list</filename>" diff --git a/doc/po/ja.po b/doc/po/ja.po index 0cceb0909..f417fefcc 100644 --- a/doc/po/ja.po +++ b/doc/po/ja.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2009-10-01 18:09+0300\n" +"POT-Creation-Date: 2009-10-01 20:13+0300\n" "PO-Revision-Date: 2009-07-30 22:55+0900\n" "Last-Translator: KURASAWA Nozomu <nabetaro@caldron.jp>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -1693,7 +1693,7 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt-cache.8.xml:281 apt-config.8.xml:93 apt-extracttemplates.1.xml:56 #: apt-ftparchive.1.xml:492 apt-get.8.xml:319 apt-mark.8.xml:89 -#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:436 apt.conf.5.xml:458 +#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:447 apt.conf.5.xml:469 msgid "options" msgstr "オプション" @@ -1943,7 +1943,7 @@ msgstr "&apt-commonoptions;" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> #: apt-cache.8.xml:361 apt-get.8.xml:559 apt-key.8.xml:138 apt-mark.8.xml:122 -#: apt.conf.5.xml:968 apt_preferences.5.xml:615 +#: apt.conf.5.xml:979 apt_preferences.5.xml:615 msgid "Files" msgstr "ファイル" @@ -1957,7 +1957,7 @@ msgstr "" #: apt-cache.8.xml:368 apt-cdrom.8.xml:155 apt-config.8.xml:103 #: apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:563 apt-get.8.xml:569 #: apt-key.8.xml:162 apt-mark.8.xml:133 apt-secure.8.xml:181 -#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:974 apt_preferences.5.xml:622 +#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:985 apt_preferences.5.xml:622 #: sources.list.5.xml:221 msgid "See Also" msgstr "関連項目" @@ -3665,7 +3665,7 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt-ftparchive.1.xml:552 apt.conf.5.xml:962 apt_preferences.5.xml:462 +#: apt-ftparchive.1.xml:552 apt.conf.5.xml:973 apt_preferences.5.xml:462 #: sources.list.5.xml:181 msgid "Examples" msgstr "サンプル" @@ -6064,30 +6064,41 @@ msgstr "" msgid "Immediate-Configure" msgstr "Immediate-Configure" -# type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml:154 msgid "" -"Disable Immediate Configuration; This dangerous option disables some of " -"APT's ordering code to cause it to make fewer dpkg calls. Doing so may be " -"necessary on some extremely slow single user systems but is very dangerous " -"and may cause package install scripts to fail or worse. Use at your own " -"risk." -msgstr "" -"å³æ™‚設定無効 - ã“ã®å±é™ºãªã‚ªãƒ—ションã¯ã€APT ã®è¦æ±‚コードを無効ã«ã—㦠dpkg ã®å‘¼" -"ã³å‡ºã—ã‚’ã»ã¨ã‚“ã©ã—ãªã„よã†ã«ã—ã¾ã™ã€‚ã“ã‚Œã¯ã€éžå¸¸ã«é…ã„シングルユーザシステム" -"ã§ã¯å¿…è¦ã‹ã‚‚ã—ã‚Œã¾ã›ã‚“ãŒã€éžå¸¸ã«å±é™ºã§ã€ãƒ‘ッケージã®ã‚¤ãƒ³ã‚¹ãƒˆãƒ¼ãƒ«ã‚¹ã‚¯ãƒªãƒ—トãŒ" -"失敗ã—ãŸã‚Šã€ã‚‚ã—ãã¯ã‚‚ã£ã¨æ‚ªã„ã“ã¨ãŒãŠãã‚‹ã‹ã‚‚ã—ã‚Œã¾ã›ã‚“。自己責任ã§ä½¿ç”¨ã—ã¦" -"ãã ã•ã„。" - -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:161 +"Defaults to on which will cause APT to install essential and important " +"packages as fast as possible in the install/upgrade operation. This is done " +"to limit the effect of a failing &dpkg; call: If this option is disabled APT " +"doesn't treat an important package in the same way as an extra package: " +"Between the unpacking of the important package A and his configuration can " +"then be many other unpack or configuration calls, e.g. for package B which " +"has no relation to A, but causes the dpkg call to fail (e.g. because " +"maintainer script of package B generates an error) which results in a system " +"state in which package A is unpacked but unconfigured - each package " +"depending on A is now no longer guaranteed to work as their dependency on A " +"is not longer satisfied. The immediate configuration marker is also applied " +"to all dependencies which can generate a problem if the dependencies e.g. " +"form a circle as a dependency with the immediate flag is comparable with a " +"Pre-Dependency. So in theory it is possible that APT encounters a situation " +"in which it is unable to perform immediate configuration, error out and " +"refers to this option so the user can deactivate the immediate configuration " +"temporary to be able to perform an install/upgrade again. Note the use of " +"the word \"theory\" here as this problem was only encountered by now in real " +"world a few times in non-stable distribution versions and caused by wrong " +"dependencies of the package in question, so you should not blindly disable " +"this option as the mentioned scenario above is not the only problem " +"immediate configuration can help to prevent in the first place." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:172 msgid "Force-LoopBreak" msgstr "Force-LoopBreak" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:162 +#: apt.conf.5.xml:173 msgid "" "Never Enable this option unless you -really- know what you are doing. It " "permits APT to temporarily remove an essential package to break a Conflicts/" @@ -6105,13 +6116,13 @@ msgstr "" "ä¸å¯æ¬ ãƒ‘ッケージã§å‹•ä½œã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:170 +#: apt.conf.5.xml:181 msgid "Cache-Limit" msgstr "Cache-Limit" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:171 +#: apt.conf.5.xml:182 msgid "" "APT uses a fixed size memory mapped cache file to store the 'available' " "information. This sets the size of that cache (in bytes)." @@ -6120,24 +6131,24 @@ msgstr "" "ファイルを使用ã—ã¾ã™ã€‚ã“ã®ã‚ªãƒ—ションã¯ã€ãã®ã‚­ãƒ£ãƒƒã‚·ãƒ¥ã‚µã‚¤ã‚ºã‚’指定ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:175 +#: apt.conf.5.xml:186 msgid "Build-Essential" msgstr "Build-Essential" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:176 +#: apt.conf.5.xml:187 msgid "Defines which package(s) are considered essential build dependencies." msgstr "構築ä¾å­˜é–¢ä¿‚ã§ä¸å¯æ¬ ãªãƒ‘ッケージを定義ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:179 +#: apt.conf.5.xml:190 msgid "Get" msgstr "Get" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:180 +#: apt.conf.5.xml:191 msgid "" "The Get subsection controls the &apt-get; tool, please see its documentation " "for more information about the options here." @@ -6146,13 +6157,13 @@ msgstr "" "&apt-get; ã®æ–‡æ›¸ã‚’å‚ç…§ã—ã¦ãã ã•ã„。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:184 +#: apt.conf.5.xml:195 msgid "Cache" msgstr "Cache" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:185 +#: apt.conf.5.xml:196 msgid "" "The Cache subsection controls the &apt-cache; tool, please see its " "documentation for more information about the options here." @@ -6161,13 +6172,13 @@ msgstr "" "㯠&apt-cache; ã®æ–‡æ›¸ã‚’å‚ç…§ã—ã¦ãã ã•ã„。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:189 +#: apt.conf.5.xml:200 msgid "CDROM" msgstr "CDROM" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:190 +#: apt.conf.5.xml:201 msgid "" "The CDROM subsection controls the &apt-cdrom; tool, please see its " "documentation for more information about the options here." @@ -6177,17 +6188,17 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:196 +#: apt.conf.5.xml:207 msgid "The Acquire Group" msgstr "Acquire グループ" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:201 +#: apt.conf.5.xml:212 msgid "PDiffs" msgstr "PDiffs" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:202 +#: apt.conf.5.xml:213 msgid "" "Try to download deltas called <literal>PDiffs</literal> for Packages or " "Sources files instead of downloading whole ones. True by default." @@ -6197,13 +6208,13 @@ msgstr "" "ルトã§ã¯ True ã§ã™ã€‚" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:207 +#: apt.conf.5.xml:218 msgid "Queue-Mode" msgstr "Queue-Mode" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:208 +#: apt.conf.5.xml:219 msgid "" "Queuing mode; <literal>Queue-Mode</literal> can be one of <literal>host</" "literal> or <literal>access</literal> which determines how APT parallelizes " @@ -6218,13 +6229,13 @@ msgstr "" # type: Content of: <refentry><refsect1><refsect2><title> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:215 +#: apt.conf.5.xml:226 msgid "Retries" msgstr "Retries" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:216 +#: apt.conf.5.xml:227 msgid "" "Number of retries to perform. If this is non-zero APT will retry failed " "files the given number of times." @@ -6233,13 +6244,13 @@ msgstr "" "ãˆã‚‰ã‚ŒãŸå›žæ•°ã ã‘リトライを行ã„ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:220 +#: apt.conf.5.xml:231 msgid "Source-Symlinks" msgstr "Source-Symlinks" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:221 +#: apt.conf.5.xml:232 msgid "" "Use symlinks for source archives. If set to true then source archives will " "be symlinked when possible instead of copying. True is the default." @@ -6250,13 +6261,13 @@ msgstr "" # type: <tag></tag> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:225 sources.list.5.xml:139 +#: apt.conf.5.xml:236 sources.list.5.xml:139 msgid "http" msgstr "http" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:226 +#: apt.conf.5.xml:237 #, fuzzy #| msgid "" #| "HTTP URIs; http::Proxy is the default http proxy to use. It is in the " @@ -6282,7 +6293,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:234 +#: apt.conf.5.xml:245 msgid "" "Three settings are provided for cache control with HTTP/1.1 compliant proxy " "caches. <literal>No-Cache</literal> tells the proxy to not use its cached " @@ -6307,7 +6318,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:244 apt.conf.5.xml:301 +#: apt.conf.5.xml:255 apt.conf.5.xml:312 msgid "" "The option <literal>timeout</literal> sets the timeout timer used by the " "method, this applies to all things including connection timeout and data " @@ -6319,7 +6330,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:247 +#: apt.conf.5.xml:258 msgid "" "One setting is provided to control the pipeline depth in cases where the " "remote server is not RFC conforming or buggy (such as Squid 2.0.2) " @@ -6338,7 +6349,7 @@ msgstr "" "ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:255 +#: apt.conf.5.xml:266 msgid "" "The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</" "literal> which accepts integer values in kilobyte. The default value is 0 " @@ -6349,12 +6360,12 @@ msgstr "" # type: <tag></tag> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:261 +#: apt.conf.5.xml:272 msgid "https" msgstr "https" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:262 +#: apt.conf.5.xml:273 msgid "" "HTTPS URIs. Cache-control and proxy options are the same as for " "<literal>http</literal> method. <literal>Pipeline-Depth</literal> option is " @@ -6365,7 +6376,7 @@ msgstr "" "ã—ã¦ã„ã¾ã›ã‚“。" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:266 +#: apt.conf.5.xml:277 msgid "" "<literal>CaInfo</literal> suboption specifies place of file that holds info " "about trusted certificates. <literal><host>::CaInfo</literal> is " @@ -6387,13 +6398,13 @@ msgstr "" # type: <tag></tag> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:284 sources.list.5.xml:150 +#: apt.conf.5.xml:295 sources.list.5.xml:150 msgid "ftp" msgstr "ftp" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:285 +#: apt.conf.5.xml:296 #, fuzzy #| msgid "" #| "FTP URIs; ftp::Proxy is the default proxy server to use. It is in the " @@ -6436,7 +6447,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:304 +#: apt.conf.5.xml:315 msgid "" "Several settings are provided to control passive mode. Generally it is safe " "to leave passive mode on, it works in nearly every environment. However " @@ -6452,7 +6463,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:311 +#: apt.conf.5.xml:322 msgid "" "It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</" "envar> environment variable to a http url - see the discussion of the http " @@ -6466,7 +6477,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:316 +#: apt.conf.5.xml:327 msgid "" "The setting <literal>ForceExtended</literal> controls the use of RFC2428 " "<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is " @@ -6483,19 +6494,19 @@ msgstr "" # type: Content of: <refentry><refnamediv><refname> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:323 sources.list.5.xml:132 +#: apt.conf.5.xml:334 sources.list.5.xml:132 msgid "cdrom" msgstr "cdrom" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:329 +#: apt.conf.5.xml:340 #, no-wrap msgid "\"/cdrom/\"::Mount \"foo\";" msgstr "\"/cdrom/\"::Mount \"foo\";" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:324 +#: apt.conf.5.xml:335 msgid "" "CDROM URIs; the only setting for CDROM URIs is the mount point, " "<literal>cdrom::Mount</literal> which must be the mount point for the CDROM " @@ -6516,13 +6527,13 @@ msgstr "" "ã™ã€‚" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:334 +#: apt.conf.5.xml:345 msgid "gpgv" msgstr "gpgv" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:335 +#: apt.conf.5.xml:346 msgid "" "GPGV URIs; the only option for GPGV URIs is the option to pass additional " "parameters to gpgv. <literal>gpgv::Options</literal> Additional options " @@ -6533,18 +6544,18 @@ msgstr "" "ã™ã€‚" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:340 +#: apt.conf.5.xml:351 msgid "CompressionTypes" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:346 +#: apt.conf.5.xml:357 #, no-wrap msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:341 +#: apt.conf.5.xml:352 msgid "" "List of compression types which are understood by the acquire methods. " "Files like <filename>Packages</filename> can be available in various " @@ -6556,19 +6567,19 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:351 +#: apt.conf.5.xml:362 #, no-wrap msgid "Acquire::CompressionTypes::Order:: \"gz\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:354 +#: apt.conf.5.xml:365 #, no-wrap msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:347 +#: apt.conf.5.xml:358 msgid "" "Also the <literal>Order</literal> subgroup can be used to define in which " "order the acquire system will try to download the compressed files. The " @@ -6585,13 +6596,13 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:358 +#: apt.conf.5.xml:369 #, no-wrap msgid "Dir::Bin::bzip2 \"/bin/bzip2\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:356 +#: apt.conf.5.xml:367 msgid "" "Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</" "replaceable></literal> will be checked: If this setting exists the method " @@ -6606,7 +6617,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:363 +#: apt.conf.5.xml:374 msgid "" "While it is possible to add an empty compression type to the order list, but " "APT in its current version doesn't understand it correctly and will display " @@ -6617,7 +6628,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:197 +#: apt.conf.5.xml:208 msgid "" "The <literal>Acquire</literal> group of options controls the download of " "packages and the URI handlers. <placeholder type=\"variablelist\" id=\"0\"/>" @@ -6628,13 +6639,13 @@ msgstr "" # type: Content of: <refentry><refsect1><refsect2><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:372 +#: apt.conf.5.xml:383 msgid "Directories" msgstr "ディレクトリ" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:374 +#: apt.conf.5.xml:385 msgid "" "The <literal>Dir::State</literal> section has directories that pertain to " "local state information. <literal>lists</literal> is the directory to place " @@ -6654,7 +6665,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:381 +#: apt.conf.5.xml:392 msgid "" "<literal>Dir::Cache</literal> contains locations pertaining to local cache " "information, such as the two package caches <literal>srcpkgcache</literal> " @@ -6676,7 +6687,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:390 +#: apt.conf.5.xml:401 msgid "" "<literal>Dir::Etc</literal> contains the location of configuration files, " "<literal>sourcelist</literal> gives the location of the sourcelist and " @@ -6691,7 +6702,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:396 +#: apt.conf.5.xml:407 msgid "" "The <literal>Dir::Parts</literal> setting reads in all the config fragments " "in lexical order from the directory specified. After this is done then the " @@ -6703,7 +6714,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:400 +#: apt.conf.5.xml:411 #, fuzzy #| msgid "" #| "Binary programs are pointed to by <literal>Dir::Bin</literal>. " @@ -6728,7 +6739,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:408 +#: apt.conf.5.xml:419 msgid "" "The configuration item <literal>RootDir</literal> has a special meaning. If " "set, all paths in <literal>Dir::</literal> will be relative to " @@ -6749,13 +6760,13 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:421 +#: apt.conf.5.xml:432 msgid "APT in DSelect" msgstr "DSelect ã§ã® APT" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:423 +#: apt.conf.5.xml:434 msgid "" "When APT is used as a &dselect; method several configuration directives " "control the default behaviour. These are in the <literal>DSelect</literal> " @@ -6765,13 +6776,13 @@ msgstr "" "設定項目ã§ã€ãƒ‡ãƒ•ã‚©ãƒ«ãƒˆã®å‹•ä½œã‚’制御ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:427 +#: apt.conf.5.xml:438 msgid "Clean" msgstr "Clean" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:428 +#: apt.conf.5.xml:439 msgid "" "Cache Clean mode; this value may be one of always, prompt, auto, pre-auto " "and never. always and prompt will remove all packages from the cache after " @@ -6788,7 +6799,7 @@ msgstr "" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:437 +#: apt.conf.5.xml:448 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the install phase." @@ -6798,13 +6809,13 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:441 +#: apt.conf.5.xml:452 msgid "Updateoptions" msgstr "Updateoptions" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:442 +#: apt.conf.5.xml:453 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the update phase." @@ -6813,13 +6824,13 @@ msgstr "" "ã•ã‚Œã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:446 +#: apt.conf.5.xml:457 msgid "PromptAfterUpdate" msgstr "PromptAfterUpdate" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:447 +#: apt.conf.5.xml:458 msgid "" "If true the [U]pdate operation in &dselect; will always prompt to continue. " "The default is to prompt only on error." @@ -6829,13 +6840,13 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:453 +#: apt.conf.5.xml:464 msgid "How APT calls dpkg" msgstr "APT ㌠dpkg を呼ã¶æ–¹æ³•" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:454 +#: apt.conf.5.xml:465 msgid "" "Several configuration directives control how APT invokes &dpkg;. These are " "in the <literal>DPkg</literal> section." @@ -6845,7 +6856,7 @@ msgstr "" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:459 +#: apt.conf.5.xml:470 msgid "" "This is a list of options to pass to dpkg. The options must be specified " "using the list notation and each list item is passed as a single argument to " @@ -6855,18 +6866,18 @@ msgstr "" "ã‘ã‚Œã°ãªã‚Šã¾ã›ã‚“。ã¾ãŸã€å„リストã¯å˜ä¸€ã®å¼•æ•°ã¨ã—㦠&dpkg; ã«æ¸¡ã•ã‚Œã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:464 +#: apt.conf.5.xml:475 msgid "Pre-Invoke" msgstr "Pre-Invoke" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:464 +#: apt.conf.5.xml:475 msgid "Post-Invoke" msgstr "Post-Invoke" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:465 +#: apt.conf.5.xml:476 msgid "" "This is a list of shell commands to run before/after invoking &dpkg;. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -6880,13 +6891,13 @@ msgstr "" # type: <tag></tag> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:471 +#: apt.conf.5.xml:482 msgid "Pre-Install-Pkgs" msgstr "Pre-Install-Pkgs" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:472 +#: apt.conf.5.xml:483 msgid "" "This is a list of shell commands to run before invoking dpkg. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -6902,7 +6913,7 @@ msgstr "" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:478 +#: apt.conf.5.xml:489 msgid "" "Version 2 of this protocol dumps more information, including the protocol " "version, the APT configuration space and the packages, files and versions " @@ -6918,13 +6929,13 @@ msgstr "" # type: Content of: <refentry><refsect1><refsect2><title> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:485 +#: apt.conf.5.xml:496 msgid "Run-Directory" msgstr "Run-Directory" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:486 +#: apt.conf.5.xml:497 msgid "" "APT chdirs to this directory before invoking dpkg, the default is <filename>/" "</filename>." @@ -6934,13 +6945,13 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:490 +#: apt.conf.5.xml:501 msgid "Build-options" msgstr "Build-options" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:491 +#: apt.conf.5.xml:502 msgid "" "These options are passed to &dpkg-buildpackage; when compiling packages, the " "default is to disable signing and produce all binaries." @@ -6949,12 +6960,12 @@ msgstr "" "ã¾ã™ã€‚デフォルトã§ã¯ç½²åを無効ã«ã—ã€å…¨ãƒã‚¤ãƒŠãƒªã‚’生æˆã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><refsect2><title> -#: apt.conf.5.xml:496 +#: apt.conf.5.xml:507 msgid "dpkg trigger usage (and related options)" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:497 +#: apt.conf.5.xml:508 msgid "" "APT can call dpkg in a way so it can make aggressive use of triggers over " "multiply calls of dpkg. Without further options dpkg will use triggers only " @@ -6969,7 +6980,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para><literallayout> -#: apt.conf.5.xml:512 +#: apt.conf.5.xml:523 #, no-wrap msgid "" "DPkg::NoTriggers \"true\";\n" @@ -6979,7 +6990,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:506 +#: apt.conf.5.xml:517 msgid "" "Note that it is not guaranteed that APT will support these options or that " "these options will not cause (big) trouble in the future. If you have " @@ -6993,12 +7004,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:518 +#: apt.conf.5.xml:529 msgid "DPkg::NoTriggers" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:519 +#: apt.conf.5.xml:530 msgid "" "Add the no triggers flag to all dpkg calls (expect the ConfigurePending " "call). See &dpkg; if you are interested in what this actually means. In " @@ -7011,14 +7022,14 @@ msgstr "" # type: <tag></tag> #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:526 +#: apt.conf.5.xml:537 #, fuzzy #| msgid "Packages::Compress" msgid "PackageManager::Configure" msgstr "Packages::Compress" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:527 +#: apt.conf.5.xml:538 msgid "" "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " "and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default " @@ -7035,13 +7046,13 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:537 +#: apt.conf.5.xml:548 #, fuzzy msgid "DPkg::ConfigurePending" msgstr "ユーザã®è¨­å®š" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:538 +#: apt.conf.5.xml:549 msgid "" "If this option is set apt will call <command>dpkg --configure --pending</" "command> to let dpkg handle all required configurations and triggers. This " @@ -7052,12 +7063,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:544 +#: apt.conf.5.xml:555 msgid "DPkg::TriggersPending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:545 +#: apt.conf.5.xml:556 msgid "" "Useful for <literal>smart</literal> configuration as a package which has " "pending triggers is not considered as <literal>installed</literal> and dpkg " @@ -7067,12 +7078,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:550 +#: apt.conf.5.xml:561 msgid "PackageManager::UnpackAll" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:551 +#: apt.conf.5.xml:562 msgid "" "As the configuration can be deferred to be done at the end by dpkg it can be " "tried to order the unpack series only by critical needs, e.g. by Pre-" @@ -7084,12 +7095,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:558 +#: apt.conf.5.xml:569 msgid "OrderList::Score::Immediate" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:566 +#: apt.conf.5.xml:577 #, no-wrap msgid "" "OrderList::Score {\n" @@ -7101,7 +7112,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:559 +#: apt.conf.5.xml:570 msgid "" "Essential packages (and there dependencies) should be configured immediately " "after unpacking. It will be a good idea to do this quite early in the " @@ -7115,12 +7126,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:579 +#: apt.conf.5.xml:590 msgid "Periodic and Archives options" msgstr "Periodic オプション㨠Archives オプション" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:580 +#: apt.conf.5.xml:591 msgid "" "<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups " "of options configure behavior of apt periodic updates, which is done by " @@ -7134,12 +7145,12 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:588 +#: apt.conf.5.xml:599 msgid "Debug options" msgstr "デãƒãƒƒã‚°ã‚ªãƒ—ション" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:590 +#: apt.conf.5.xml:601 msgid "" "Enabling options in the <literal>Debug::</literal> section will cause " "debugging information to be sent to the standard error stream of the program " @@ -7150,7 +7161,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:601 +#: apt.conf.5.xml:612 msgid "" "<literal>Debug::pkgProblemResolver</literal> enables output about the " "decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</" @@ -7161,7 +7172,7 @@ msgstr "" "ã«ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:609 +#: apt.conf.5.xml:620 msgid "" "<literal>Debug::NoLocking</literal> disables all file locking. This can be " "used to run some operations (for instance, <literal>apt-get -s install</" @@ -7172,7 +7183,7 @@ msgstr "" "literal>) ã‚’è¡Œã†å ´åˆã«ä½¿ç”¨ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:618 +#: apt.conf.5.xml:629 msgid "" "<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each " "time that <literal>apt</literal> invokes &dpkg;." @@ -7182,66 +7193,66 @@ msgstr "" #. motivating example, except I haven't a clue why you'd want #. to do this. #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:626 +#: apt.conf.5.xml:637 msgid "" "<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data " "in CDROM IDs." msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:636 +#: apt.conf.5.xml:647 msgid "A full list of debugging options to apt follows." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:641 +#: apt.conf.5.xml:652 msgid "<literal>Debug::Acquire::cdrom</literal>" msgstr "<literal>Debug::Acquire::cdrom</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:645 +#: apt.conf.5.xml:656 msgid "" "Print information related to accessing <literal>cdrom://</literal> sources." msgstr "" "<literal>cdrom://</literal> ソースã¸ã®ã‚¢ã‚¯ã‚»ã‚¹ã«é–¢ã™ã‚‹æƒ…報を出力ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:652 +#: apt.conf.5.xml:663 msgid "<literal>Debug::Acquire::ftp</literal>" msgstr "<literal>Debug::Acquire::ftp</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:656 +#: apt.conf.5.xml:667 msgid "Print information related to downloading packages using FTP." msgstr "FTP を用ã„ãŸãƒ‘ッケージã®ãƒ€ã‚¦ãƒ³ãƒ­ãƒ¼ãƒ‰ã«é–¢ã™ã‚‹æƒ…報を出力ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:663 +#: apt.conf.5.xml:674 msgid "<literal>Debug::Acquire::http</literal>" msgstr "<literal>Debug::Acquire::http</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:667 +#: apt.conf.5.xml:678 msgid "Print information related to downloading packages using HTTP." msgstr "HTTP を用ã„ãŸãƒ‘ッケージã®ãƒ€ã‚¦ãƒ³ãƒ­ãƒ¼ãƒ‰ã«é–¢ã™ã‚‹æƒ…報を出力ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:674 +#: apt.conf.5.xml:685 msgid "<literal>Debug::Acquire::https</literal>" msgstr "<literal>Debug::Acquire::https</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:678 +#: apt.conf.5.xml:689 msgid "Print information related to downloading packages using HTTPS." msgstr "HTTPS を用ã„ãŸãƒ‘ッケージã®ãƒ€ã‚¦ãƒ³ãƒ­ãƒ¼ãƒ‰ã«é–¢ã™ã‚‹æƒ…報を出力ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:685 +#: apt.conf.5.xml:696 msgid "<literal>Debug::Acquire::gpgv</literal>" msgstr "<literal>Debug::Acquire::gpgv</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:689 +#: apt.conf.5.xml:700 msgid "" "Print information related to verifying cryptographic signatures using " "<literal>gpg</literal>." @@ -7249,46 +7260,46 @@ msgstr "" "<literal>gpg</literal> を用ã„ãŸæš—å·ç½²åã®æ¤œè¨¼ã«é–¢ã™ã‚‹æƒ…報を出力ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:696 +#: apt.conf.5.xml:707 msgid "<literal>Debug::aptcdrom</literal>" msgstr "<literal>Debug::aptcdrom</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:700 +#: apt.conf.5.xml:711 msgid "" "Output information about the process of accessing collections of packages " "stored on CD-ROMs." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:707 +#: apt.conf.5.xml:718 msgid "<literal>Debug::BuildDeps</literal>" msgstr "<literal>Debug::BuildDeps</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:710 +#: apt.conf.5.xml:721 msgid "Describes the process of resolving build-dependencies in &apt-get;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:717 +#: apt.conf.5.xml:728 msgid "<literal>Debug::Hashes</literal>" msgstr "<literal>Debug::Hashes</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:720 +#: apt.conf.5.xml:731 msgid "" "Output each cryptographic hash that is generated by the <literal>apt</" "literal> libraries." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:727 +#: apt.conf.5.xml:738 msgid "<literal>Debug::IdentCDROM</literal>" msgstr "<literal>Debug::IdentCDROM</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:730 +#: apt.conf.5.xml:741 msgid "" "Do not include information from <literal>statfs</literal>, namely the number " "of used and free blocks on the CD-ROM filesystem, when generating an ID for " @@ -7296,93 +7307,93 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:738 +#: apt.conf.5.xml:749 msgid "<literal>Debug::NoLocking</literal>" msgstr "<literal>Debug::NoLocking</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:741 +#: apt.conf.5.xml:752 msgid "" "Disable all file locking. For instance, this will allow two instances of " "<quote><literal>apt-get update</literal></quote> to run at the same time." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:749 +#: apt.conf.5.xml:760 msgid "<literal>Debug::pkgAcquire</literal>" msgstr "<literal>Debug::pkgAcquire</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:753 +#: apt.conf.5.xml:764 msgid "Log when items are added to or removed from the global download queue." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:760 +#: apt.conf.5.xml:771 msgid "<literal>Debug::pkgAcquire::Auth</literal>" msgstr "<literal>Debug::pkgAcquire::Auth</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:763 +#: apt.conf.5.xml:774 msgid "" "Output status messages and errors related to verifying checksums and " "cryptographic signatures of downloaded files." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:770 +#: apt.conf.5.xml:781 msgid "<literal>Debug::pkgAcquire::Diffs</literal>" msgstr "<literal>Debug::pkgAcquire::Diffs</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:773 +#: apt.conf.5.xml:784 msgid "" "Output information about downloading and applying package index list diffs, " "and errors relating to package index list diffs." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:781 +#: apt.conf.5.xml:792 msgid "<literal>Debug::pkgAcquire::RRed</literal>" msgstr "<literal>Debug::pkgAcquire::RRed</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:785 +#: apt.conf.5.xml:796 msgid "" "Output information related to patching apt package lists when downloading " "index diffs instead of full indices." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:792 +#: apt.conf.5.xml:803 msgid "<literal>Debug::pkgAcquire::Worker</literal>" msgstr "<literal>Debug::pkgAcquire::Worker</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:796 +#: apt.conf.5.xml:807 msgid "" "Log all interactions with the sub-processes that actually perform downloads." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:803 +#: apt.conf.5.xml:814 msgid "<literal>Debug::pkgAutoRemove</literal>" msgstr "<literal>Debug::pkgAutoRemove</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:807 +#: apt.conf.5.xml:818 msgid "" "Log events related to the automatically-installed status of packages and to " "the removal of unused packages." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:814 +#: apt.conf.5.xml:825 msgid "<literal>Debug::pkgDepCache::AutoInstall</literal>" msgstr "<literal>Debug::pkgDepCache::AutoInstall</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:817 +#: apt.conf.5.xml:828 msgid "" "Generate debug messages describing which packages are being automatically " "installed to resolve dependencies. This corresponds to the initial auto-" @@ -7392,12 +7403,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:828 +#: apt.conf.5.xml:839 msgid "<literal>Debug::pkgDepCache::Marker</literal>" msgstr "<literal>Debug::pkgDepCache::Marker</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:831 +#: apt.conf.5.xml:842 msgid "" "Generate debug messages describing which package is marked as keep/install/" "remove while the ProblemResolver does his work. Each addition or deletion " @@ -7414,91 +7425,91 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:850 +#: apt.conf.5.xml:861 msgid "<literal>Debug::pkgInitConfig</literal>" msgstr "<literal>Debug::pkgInitConfig</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:853 +#: apt.conf.5.xml:864 msgid "Dump the default configuration to standard error on startup." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:860 +#: apt.conf.5.xml:871 msgid "<literal>Debug::pkgDPkgPM</literal>" msgstr "<literal>Debug::pkgDPkgPM</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:863 +#: apt.conf.5.xml:874 msgid "" "When invoking &dpkg;, output the precise command line with which it is being " "invoked, with arguments separated by a single space character." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:871 +#: apt.conf.5.xml:882 msgid "<literal>Debug::pkgDPkgProgressReporting</literal>" msgstr "<literal>Debug::pkgDPkgProgressReporting</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:874 +#: apt.conf.5.xml:885 msgid "" "Output all the data received from &dpkg; on the status file descriptor and " "any errors encountered while parsing it." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:881 +#: apt.conf.5.xml:892 msgid "<literal>Debug::pkgOrderList</literal>" msgstr "<literal>Debug::pkgOrderList</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:885 +#: apt.conf.5.xml:896 msgid "" "Generate a trace of the algorithm that decides the order in which " "<literal>apt</literal> should pass packages to &dpkg;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:893 +#: apt.conf.5.xml:904 msgid "<literal>Debug::pkgPackageManager</literal>" msgstr "<literal>Debug::pkgPackageManager</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:897 +#: apt.conf.5.xml:908 msgid "" "Output status messages tracing the steps performed when invoking &dpkg;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:904 +#: apt.conf.5.xml:915 msgid "<literal>Debug::pkgPolicy</literal>" msgstr "<literal>Debug::pkgPolicy</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:908 +#: apt.conf.5.xml:919 msgid "Output the priority of each package list on startup." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:914 +#: apt.conf.5.xml:925 msgid "<literal>Debug::pkgProblemResolver</literal>" msgstr "<literal>Debug::pkgProblemResolver</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:918 +#: apt.conf.5.xml:929 msgid "" "Trace the execution of the dependency resolver (this applies only to what " "happens when a complex dependency problem is encountered)." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:926 +#: apt.conf.5.xml:937 msgid "<literal>Debug::pkgProblemResolver::ShowScores</literal>" msgstr "<literal>Debug::pkgProblemResolver::ShowScores</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:929 +#: apt.conf.5.xml:940 msgid "" "Display a list of all installed packages with their calculated score used by " "the pkgProblemResolver. The description of the package is the same as " @@ -7506,12 +7517,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:937 +#: apt.conf.5.xml:948 msgid "<literal>Debug::sourceList</literal>" msgstr "<literal>Debug::sourceList</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:941 +#: apt.conf.5.xml:952 msgid "" "Print information about the vendors read from <filename>/etc/apt/vendors." "list</filename>." @@ -7519,7 +7530,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:963 +#: apt.conf.5.xml:974 msgid "" "&configureindex; is a configuration file showing example values for all " "possible options." @@ -7529,7 +7540,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><variablelist> -#: apt.conf.5.xml:970 +#: apt.conf.5.xml:981 #, fuzzy #| msgid "&apt-conf;" msgid "&file-aptconf;" @@ -7538,7 +7549,7 @@ msgstr "&apt-conf;" # type: Content of: <refentry><refsect1><para> #. ? reading apt.conf #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:975 +#: apt.conf.5.xml:986 msgid "&apt-cache;, &apt-config;, &apt-preferences;." msgstr "&apt-cache;, &apt-config;, &apt-preferences;." @@ -10424,6 +10435,20 @@ msgstr "" msgid "Which will use the already fetched archives on the disc." msgstr "" +# type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#~ msgid "" +#~ "Disable Immediate Configuration; This dangerous option disables some of " +#~ "APT's ordering code to cause it to make fewer dpkg calls. Doing so may be " +#~ "necessary on some extremely slow single user systems but is very " +#~ "dangerous and may cause package install scripts to fail or worse. Use at " +#~ "your own risk." +#~ msgstr "" +#~ "å³æ™‚設定無効 - ã“ã®å±é™ºãªã‚ªãƒ—ションã¯ã€APT ã®è¦æ±‚コードを無効ã«ã—㦠dpkg " +#~ "ã®å‘¼ã³å‡ºã—ã‚’ã»ã¨ã‚“ã©ã—ãªã„よã†ã«ã—ã¾ã™ã€‚ã“ã‚Œã¯ã€éžå¸¸ã«é…ã„シングルユーザシ" +#~ "ステムã§ã¯å¿…è¦ã‹ã‚‚ã—ã‚Œã¾ã›ã‚“ãŒã€éžå¸¸ã«å±é™ºã§ã€ãƒ‘ッケージã®ã‚¤ãƒ³ã‚¹ãƒˆãƒ¼ãƒ«ã‚¹ã‚¯" +#~ "リプトãŒå¤±æ•—ã—ãŸã‚Šã€ã‚‚ã—ãã¯ã‚‚ã£ã¨æ‚ªã„ã“ã¨ãŒãŠãã‚‹ã‹ã‚‚ã—ã‚Œã¾ã›ã‚“。自己責任" +#~ "ã§ä½¿ç”¨ã—ã¦ãã ã•ã„。" + # type: Content of: <refentry><refnamediv><refname> #, fuzzy #~ msgid "NoConfigure" -- cgit v1.2.3 From 71bba383561308577a6ae1acea136428721a5f36 Mon Sep 17 00:00:00 2001 From: David Kalnischkies <kalnischkies@gmail.com> Date: Tue, 13 Oct 2009 20:07:59 +0200 Subject: add a note about the possibility to support more URI types by installing some apt-transport-methods packages, e.g. https and debtorrent. --- doc/sources.list.5.xml | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'doc') diff --git a/doc/sources.list.5.xml b/doc/sources.list.5.xml index c758be61f..379112c83 100644 --- a/doc/sources.list.5.xml +++ b/doc/sources.list.5.xml @@ -174,6 +174,18 @@ deb http://http.us.debian.org/debian dists/stable-updates/ <command>dd</command> commands to perform the file transfers from the remote.</para></listitem> </varlistentry> + + <varlistentry><term>more recongnizable URI types</term> + <listitem><para> + APT can be extended with more methods shipped in other optional packages which should + follow the nameing scheme <literal>apt-transport-<replaceable>method</replaceable></literal>. + The APT team e.g. maintain also the <literal>apt-transport-https</literal> package which + provides access methods for https-URIs with features similiar to the http method, but other + methods for using e.g. debtorrent are also available, see <citerefentry> + <refentrytitle><filename>apt-transport-debtorrent</filename></refentrytitle> + <manvolnum>1</manvolnum></citerefentry>. + </para></listitem> + </varlistentry> </variablelist> </para> </refsect1> -- cgit v1.2.3 From 6fb994bc5d7c5c6d76472819f630bfcfead560fe Mon Sep 17 00:00:00 2001 From: David Kalnischkies <kalnischkies@gmail.com> Date: Wed, 14 Oct 2009 07:57:45 +0200 Subject: update po(t)s of all languages and fix a simple docbook-warning in the fr.po by adding a contrib tag to apt.team in apt.ent --- doc/po/apt-doc.pot | 442 ++++++++++++++++++++++++++------------------------ doc/po/fr.po | 460 ++++++++++++++++++++++++++++------------------------- doc/po/ja.po | 459 +++++++++++++++++++++++++++------------------------- 3 files changed, 726 insertions(+), 635 deletions(-) (limited to 'doc') diff --git a/doc/po/apt-doc.pot b/doc/po/apt-doc.pot index 0037b235b..00818eb27 100644 --- a/doc/po/apt-doc.pot +++ b/doc/po/apt-doc.pot @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2009-10-01 20:13+0300\n" +"POT-Creation-Date: 2009-10-14 07:44+0300\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -1218,7 +1218,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt-cache.8.xml:281 apt-config.8.xml:93 apt-extracttemplates.1.xml:56 apt-ftparchive.1.xml:492 apt-get.8.xml:319 apt-mark.8.xml:89 apt-sortpkgs.1.xml:54 apt.conf.5.xml:447 apt.conf.5.xml:469 +#: apt-cache.8.xml:281 apt-config.8.xml:93 apt-extracttemplates.1.xml:56 apt-ftparchive.1.xml:492 apt-get.8.xml:319 apt-mark.8.xml:89 apt-sortpkgs.1.xml:54 apt.conf.5.xml:452 apt.conf.5.xml:474 msgid "options" msgstr "" @@ -1416,7 +1416,7 @@ msgid "&apt-commonoptions;" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt-cache.8.xml:361 apt-get.8.xml:559 apt-key.8.xml:138 apt-mark.8.xml:122 apt.conf.5.xml:979 apt_preferences.5.xml:615 +#: apt-cache.8.xml:361 apt-get.8.xml:559 apt-key.8.xml:138 apt-mark.8.xml:122 apt.conf.5.xml:984 apt_preferences.5.xml:615 msgid "Files" msgstr "" @@ -1426,7 +1426,7 @@ msgid "&file-sourceslist; &file-statelists;" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt-cache.8.xml:368 apt-cdrom.8.xml:155 apt-config.8.xml:103 apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:563 apt-get.8.xml:569 apt-key.8.xml:162 apt-mark.8.xml:133 apt-secure.8.xml:181 apt-sortpkgs.1.xml:69 apt.conf.5.xml:985 apt_preferences.5.xml:622 sources.list.5.xml:221 +#: apt-cache.8.xml:368 apt-cdrom.8.xml:155 apt-config.8.xml:103 apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:563 apt-get.8.xml:569 apt-key.8.xml:162 apt-mark.8.xml:133 apt-secure.8.xml:181 apt-sortpkgs.1.xml:69 apt.conf.5.xml:990 apt_preferences.5.xml:622 sources.list.5.xml:233 msgid "See Also" msgstr "" @@ -2681,7 +2681,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt-ftparchive.1.xml:552 apt.conf.5.xml:973 apt_preferences.5.xml:462 sources.list.5.xml:181 +#: apt-ftparchive.1.xml:552 apt.conf.5.xml:978 apt_preferences.5.xml:462 sources.list.5.xml:193 msgid "Examples" msgstr "" @@ -4225,12 +4225,16 @@ msgid "" "treated as comments (ignored), as well as all text between " "<literal>/*</literal> and <literal>*/</literal>, just like C/C++ comments. " "Each line is of the form <literal>APT::Get::Assume-Yes \"true\";</literal> " -"The trailing semicolon is required and the quotes are optional. A new scope " +"The trailing semicolon and the quotes are required. The value must be on one " +"line, and there is no kind of string concatenation. It must not include " +"inside quotes. The behavior of the backslash \"\\\" and escaped characters " +"inside a value is undefined and it should not be used. An option name may " +"include alphanumerical characters and the \"/-:._+\" characters. A new scope " "can be opened with curly braces, like:" msgstr "" #. type: Content of: <refentry><refsect1><informalexample><programlisting> -#: apt.conf.5.xml:66 +#: apt.conf.5.xml:70 #, no-wrap msgid "" "APT {\n" @@ -4242,7 +4246,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:74 +#: apt.conf.5.xml:78 msgid "" "with newlines placed to make it more readable. Lists can be created by " "opening a scope and including a single string enclosed in quotes followed by " @@ -4251,13 +4255,13 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><informalexample><programlisting> -#: apt.conf.5.xml:79 +#: apt.conf.5.xml:83 #, no-wrap msgid "DPkg::Pre-Install-Pkgs {\"/usr/sbin/dpkg-preconfigure --apt\";};\n" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:82 +#: apt.conf.5.xml:86 msgid "" "In general the sample configuration file in " "<filename>&docdir;examples/apt.conf</filename> &configureindex; is a good " @@ -4265,14 +4269,14 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:86 +#: apt.conf.5.xml:90 msgid "" "The names of the configuration items are not case-sensitive. So in the " "previous example you could use <literal>dpkg::pre-install-pkgs</literal>." msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:89 +#: apt.conf.5.xml:93 msgid "" "Names for the configuration items are optional if a list is defined as it " "can be see in the <literal>DPkg::Pre-Install-Pkgs</literal> example " @@ -4282,9 +4286,10 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:94 +#: apt.conf.5.xml:98 msgid "" -"Two specials are allowed, <literal>#include</literal> and " +"Two specials are allowed, <literal>#include</literal> (which is deprecated " +"and not supported by alternative implementations) and " "<literal>#clear</literal>: <literal>#include</literal> will include the " "given file, unless the filename ends in a slash, then the whole directory is " "included. <literal>#clear</literal> is used to erase a part of the " @@ -4293,7 +4298,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:101 +#: apt.conf.5.xml:106 msgid "" "The #clear command is the only way to delete a list or a complete scope. " "Reopening a scope or the ::-style described below will " @@ -4303,7 +4308,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:106 +#: apt.conf.5.xml:111 msgid "" "All of the APT tools take a -o option which allows an arbitrary " "configuration directive to be specified on the command line. The syntax is a " @@ -4314,7 +4319,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:113 +#: apt.conf.5.xml:118 msgid "" "Note that you can use :: only for appending one item per line to a list and " "that you should not use it in combination with the scope syntax. (The scope " @@ -4331,24 +4336,24 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:125 +#: apt.conf.5.xml:130 msgid "The APT Group" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:126 +#: apt.conf.5.xml:131 msgid "" "This group of options controls general APT behavior as well as holding the " "options for all of the tools." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:130 +#: apt.conf.5.xml:135 msgid "Architecture" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:131 +#: apt.conf.5.xml:136 msgid "" "System Architecture; sets the architecture to use when fetching files and " "parsing package lists. The internal default is the architecture apt was " @@ -4356,12 +4361,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:136 +#: apt.conf.5.xml:141 msgid "Default-Release" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:137 +#: apt.conf.5.xml:142 msgid "" "Default release to install packages from if more than one version " "available. Contains release name, codename or release version. Examples: " @@ -4370,24 +4375,24 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:141 +#: apt.conf.5.xml:146 msgid "Ignore-Hold" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:142 +#: apt.conf.5.xml:147 msgid "" "Ignore Held packages; This global option causes the problem resolver to " "ignore held packages in its decision making." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:146 +#: apt.conf.5.xml:151 msgid "Clean-Installed" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:147 +#: apt.conf.5.xml:152 msgid "" "Defaults to on. When turned on the autoclean feature will remove any " "packages which can no longer be downloaded from the cache. If turned off " @@ -4396,12 +4401,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:153 +#: apt.conf.5.xml:158 msgid "Immediate-Configure" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:154 +#: apt.conf.5.xml:159 msgid "" "Defaults to on which will cause APT to install essential and important " "packages as fast as possible in the install/upgrade operation. This is done " @@ -4428,12 +4433,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:172 +#: apt.conf.5.xml:177 msgid "Force-LoopBreak" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:173 +#: apt.conf.5.xml:178 msgid "" "Never Enable this option unless you -really- know what you are doing. It " "permits APT to temporarily remove an essential package to break a " @@ -4444,87 +4449,87 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:181 +#: apt.conf.5.xml:186 msgid "Cache-Limit" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:182 +#: apt.conf.5.xml:187 msgid "" "APT uses a fixed size memory mapped cache file to store the 'available' " "information. This sets the size of that cache (in bytes)." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:186 +#: apt.conf.5.xml:191 msgid "Build-Essential" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:187 +#: apt.conf.5.xml:192 msgid "Defines which package(s) are considered essential build dependencies." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:190 +#: apt.conf.5.xml:195 msgid "Get" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:191 +#: apt.conf.5.xml:196 msgid "" "The Get subsection controls the &apt-get; tool, please see its documentation " "for more information about the options here." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:195 +#: apt.conf.5.xml:200 msgid "Cache" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:196 +#: apt.conf.5.xml:201 msgid "" "The Cache subsection controls the &apt-cache; tool, please see its " "documentation for more information about the options here." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:200 +#: apt.conf.5.xml:205 msgid "CDROM" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:201 +#: apt.conf.5.xml:206 msgid "" "The CDROM subsection controls the &apt-cdrom; tool, please see its " "documentation for more information about the options here." msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:207 +#: apt.conf.5.xml:212 msgid "The Acquire Group" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:212 +#: apt.conf.5.xml:217 msgid "PDiffs" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:213 +#: apt.conf.5.xml:218 msgid "" "Try to download deltas called <literal>PDiffs</literal> for Packages or " "Sources files instead of downloading whole ones. True by default." msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:218 +#: apt.conf.5.xml:223 msgid "Queue-Mode" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:219 +#: apt.conf.5.xml:224 msgid "" "Queuing mode; <literal>Queue-Mode</literal> can be one of " "<literal>host</literal> or <literal>access</literal> which determines how " @@ -4534,36 +4539,36 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:226 +#: apt.conf.5.xml:231 msgid "Retries" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:227 +#: apt.conf.5.xml:232 msgid "" "Number of retries to perform. If this is non-zero APT will retry failed " "files the given number of times." msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:231 +#: apt.conf.5.xml:236 msgid "Source-Symlinks" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:232 +#: apt.conf.5.xml:237 msgid "" "Use symlinks for source archives. If set to true then source archives will " "be symlinked when possible instead of copying. True is the default." msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:236 sources.list.5.xml:139 +#: apt.conf.5.xml:241 sources.list.5.xml:139 msgid "http" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:237 +#: apt.conf.5.xml:242 msgid "" "HTTP URIs; http::Proxy is the default http proxy to use. It is in the " "standard form of <literal>http://[[user][:pass]@]host[:port]/</literal>. Per " @@ -4575,7 +4580,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:245 +#: apt.conf.5.xml:250 msgid "" "Three settings are provided for cache control with HTTP/1.1 compliant proxy " "caches. <literal>No-Cache</literal> tells the proxy to not use its cached " @@ -4589,7 +4594,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:255 apt.conf.5.xml:312 +#: apt.conf.5.xml:260 apt.conf.5.xml:317 msgid "" "The option <literal>timeout</literal> sets the timeout timer used by the " "method, this applies to all things including connection timeout and data " @@ -4597,7 +4602,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:258 +#: apt.conf.5.xml:263 msgid "" "One setting is provided to control the pipeline depth in cases where the " "remote server is not RFC conforming or buggy (such as Squid 2.0.2) " @@ -4609,7 +4614,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:266 +#: apt.conf.5.xml:271 msgid "" "The used bandwidth can be limited with " "<literal>Acquire::http::Dl-Limit</literal> which accepts integer values in " @@ -4619,12 +4624,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:272 +#: apt.conf.5.xml:277 msgid "https" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:273 +#: apt.conf.5.xml:278 msgid "" "HTTPS URIs. Cache-control and proxy options are the same as for " "<literal>http</literal> method. <literal>Pipeline-Depth</literal> option is " @@ -4632,7 +4637,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:277 +#: apt.conf.5.xml:282 msgid "" "<literal>CaInfo</literal> suboption specifies place of file that holds info " "about trusted certificates. <literal><host>::CaInfo</literal> is " @@ -4654,12 +4659,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:295 sources.list.5.xml:150 +#: apt.conf.5.xml:300 sources.list.5.xml:150 msgid "ftp" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:296 +#: apt.conf.5.xml:301 msgid "" "FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the standard " "form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. Per host " @@ -4679,7 +4684,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:315 +#: apt.conf.5.xml:320 msgid "" "Several settings are provided to control passive mode. Generally it is safe " "to leave passive mode on, it works in nearly every environment. However " @@ -4689,7 +4694,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:322 +#: apt.conf.5.xml:327 msgid "" "It is possible to proxy FTP over HTTP by setting the " "<envar>ftp_proxy</envar> environment variable to a http url - see the " @@ -4699,7 +4704,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:327 +#: apt.conf.5.xml:332 msgid "" "The setting <literal>ForceExtended</literal> controls the use of RFC2428 " "<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is " @@ -4709,18 +4714,18 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:334 sources.list.5.xml:132 +#: apt.conf.5.xml:339 sources.list.5.xml:132 msgid "cdrom" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:340 +#: apt.conf.5.xml:345 #, no-wrap -msgid "\"/cdrom/\"::Mount \"foo\";" +msgid "/cdrom/::Mount \"foo\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:335 +#: apt.conf.5.xml:340 msgid "" "CDROM URIs; the only setting for CDROM URIs is the mount point, " "<literal>cdrom::Mount</literal> which must be the mount point for the CDROM " @@ -4733,12 +4738,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:345 +#: apt.conf.5.xml:350 msgid "gpgv" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:346 +#: apt.conf.5.xml:351 msgid "" "GPGV URIs; the only option for GPGV URIs is the option to pass additional " "parameters to gpgv. <literal>gpgv::Options</literal> Additional options " @@ -4746,12 +4751,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:351 +#: apt.conf.5.xml:356 msgid "CompressionTypes" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:357 +#: apt.conf.5.xml:362 #, no-wrap msgid "" "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> " @@ -4759,7 +4764,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:352 +#: apt.conf.5.xml:357 msgid "" "List of compression types which are understood by the acquire methods. " "Files like <filename>Packages</filename> can be available in various " @@ -4771,19 +4776,19 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:362 +#: apt.conf.5.xml:367 #, no-wrap msgid "Acquire::CompressionTypes::Order:: \"gz\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:365 +#: apt.conf.5.xml:370 #, no-wrap msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:358 +#: apt.conf.5.xml:363 msgid "" "Also the <literal>Order</literal> subgroup can be used to define in which " "order the acquire system will try to download the compressed files. The " @@ -4800,13 +4805,13 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:369 +#: apt.conf.5.xml:374 #, no-wrap msgid "Dir::Bin::bzip2 \"/bin/bzip2\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:367 +#: apt.conf.5.xml:372 msgid "" "Note that at run time the " "<literal>Dir::Bin::<replaceable>Methodname</replaceable></literal> will be " @@ -4821,7 +4826,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:374 +#: apt.conf.5.xml:379 msgid "" "While it is possible to add an empty compression type to the order list, but " "APT in its current version doesn't understand it correctly and will display " @@ -4831,7 +4836,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:208 +#: apt.conf.5.xml:213 msgid "" "The <literal>Acquire</literal> group of options controls the download of " "packages and the URI handlers. <placeholder type=\"variablelist\" " @@ -4839,12 +4844,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:383 +#: apt.conf.5.xml:388 msgid "Directories" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:385 +#: apt.conf.5.xml:390 msgid "" "The <literal>Dir::State</literal> section has directories that pertain to " "local state information. <literal>lists</literal> is the directory to place " @@ -4856,7 +4861,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:392 +#: apt.conf.5.xml:397 msgid "" "<literal>Dir::Cache</literal> contains locations pertaining to local cache " "information, such as the two package caches <literal>srcpkgcache</literal> " @@ -4869,7 +4874,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:401 +#: apt.conf.5.xml:406 msgid "" "<literal>Dir::Etc</literal> contains the location of configuration files, " "<literal>sourcelist</literal> gives the location of the sourcelist and " @@ -4879,7 +4884,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:407 +#: apt.conf.5.xml:412 msgid "" "The <literal>Dir::Parts</literal> setting reads in all the config fragments " "in lexical order from the directory specified. After this is done then the " @@ -4887,7 +4892,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:411 +#: apt.conf.5.xml:416 msgid "" "Binary programs are pointed to by " "<literal>Dir::Bin</literal>. <literal>Dir::Bin::Methods</literal> specifies " @@ -4899,7 +4904,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:419 +#: apt.conf.5.xml:424 msgid "" "The configuration item <literal>RootDir</literal> has a special meaning. If " "set, all paths in <literal>Dir::</literal> will be relative to " @@ -4912,12 +4917,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:432 +#: apt.conf.5.xml:437 msgid "APT in DSelect" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:434 +#: apt.conf.5.xml:439 msgid "" "When APT is used as a &dselect; method several configuration directives " "control the default behaviour. These are in the <literal>DSelect</literal> " @@ -4925,12 +4930,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:438 +#: apt.conf.5.xml:443 msgid "Clean" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:439 +#: apt.conf.5.xml:444 msgid "" "Cache Clean mode; this value may be one of always, prompt, auto, pre-auto " "and never. always and prompt will remove all packages from the cache after " @@ -4941,50 +4946,50 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:448 +#: apt.conf.5.xml:453 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the install phase." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:452 +#: apt.conf.5.xml:457 msgid "Updateoptions" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:453 +#: apt.conf.5.xml:458 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the update phase." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:457 +#: apt.conf.5.xml:462 msgid "PromptAfterUpdate" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:458 +#: apt.conf.5.xml:463 msgid "" "If true the [U]pdate operation in &dselect; will always prompt to continue. " "The default is to prompt only on error." msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:464 +#: apt.conf.5.xml:469 msgid "How APT calls dpkg" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:465 +#: apt.conf.5.xml:470 msgid "" "Several configuration directives control how APT invokes &dpkg;. These are " "in the <literal>DPkg</literal> section." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:470 +#: apt.conf.5.xml:475 msgid "" "This is a list of options to pass to dpkg. The options must be specified " "using the list notation and each list item is passed as a single argument to " @@ -4992,17 +4997,17 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:475 +#: apt.conf.5.xml:480 msgid "Pre-Invoke" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:475 +#: apt.conf.5.xml:480 msgid "Post-Invoke" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:476 +#: apt.conf.5.xml:481 msgid "" "This is a list of shell commands to run before/after invoking &dpkg;. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -5011,12 +5016,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:482 +#: apt.conf.5.xml:487 msgid "Pre-Install-Pkgs" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:483 +#: apt.conf.5.xml:488 msgid "" "This is a list of shell commands to run before invoking dpkg. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -5026,7 +5031,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:489 +#: apt.conf.5.xml:494 msgid "" "Version 2 of this protocol dumps more information, including the protocol " "version, the APT configuration space and the packages, files and versions " @@ -5037,36 +5042,36 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:496 +#: apt.conf.5.xml:501 msgid "Run-Directory" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:497 +#: apt.conf.5.xml:502 msgid "" "APT chdirs to this directory before invoking dpkg, the default is " "<filename>/</filename>." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:501 +#: apt.conf.5.xml:506 msgid "Build-options" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:502 +#: apt.conf.5.xml:507 msgid "" "These options are passed to &dpkg-buildpackage; when compiling packages, the " "default is to disable signing and produce all binaries." msgstr "" #. type: Content of: <refentry><refsect1><refsect2><title> -#: apt.conf.5.xml:507 +#: apt.conf.5.xml:512 msgid "dpkg trigger usage (and related options)" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:508 +#: apt.conf.5.xml:513 msgid "" "APT can call dpkg in a way so it can make aggressive use of triggers over " "multiply calls of dpkg. Without further options dpkg will use triggers only " @@ -5081,7 +5086,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para><literallayout> -#: apt.conf.5.xml:523 +#: apt.conf.5.xml:528 #, no-wrap msgid "" "DPkg::NoTriggers \"true\";\n" @@ -5091,7 +5096,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:517 +#: apt.conf.5.xml:522 msgid "" "Note that it is not guaranteed that APT will support these options or that " "these options will not cause (big) trouble in the future. If you have " @@ -5105,12 +5110,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:529 +#: apt.conf.5.xml:534 msgid "DPkg::NoTriggers" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:530 +#: apt.conf.5.xml:535 msgid "" "Add the no triggers flag to all dpkg calls (expect the ConfigurePending " "call). See &dpkg; if you are interested in what this actually means. In " @@ -5122,12 +5127,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:537 +#: apt.conf.5.xml:542 msgid "PackageManager::Configure" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:538 +#: apt.conf.5.xml:543 msgid "" "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " "and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default " @@ -5144,12 +5149,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:548 +#: apt.conf.5.xml:553 msgid "DPkg::ConfigurePending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:549 +#: apt.conf.5.xml:554 msgid "" "If this option is set apt will call <command>dpkg --configure " "--pending</command> to let dpkg handle all required configurations and " @@ -5161,12 +5166,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:555 +#: apt.conf.5.xml:560 msgid "DPkg::TriggersPending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:556 +#: apt.conf.5.xml:561 msgid "" "Useful for <literal>smart</literal> configuration as a package which has " "pending triggers is not considered as <literal>installed</literal> and dpkg " @@ -5176,12 +5181,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:561 +#: apt.conf.5.xml:566 msgid "PackageManager::UnpackAll" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:562 +#: apt.conf.5.xml:567 msgid "" "As the configuration can be deferred to be done at the end by dpkg it can be " "tried to order the unpack series only by critical needs, e.g. by " @@ -5193,12 +5198,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:569 +#: apt.conf.5.xml:574 msgid "OrderList::Score::Immediate" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:577 +#: apt.conf.5.xml:582 #, no-wrap msgid "" "OrderList::Score {\n" @@ -5210,7 +5215,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:570 +#: apt.conf.5.xml:575 msgid "" "Essential packages (and there dependencies) should be configured immediately " "after unpacking. It will be a good idea to do this quite early in the " @@ -5224,12 +5229,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:590 +#: apt.conf.5.xml:595 msgid "Periodic and Archives options" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:591 +#: apt.conf.5.xml:596 msgid "" "<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups " "of options configure behavior of apt periodic updates, which is done by " @@ -5238,12 +5243,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:599 +#: apt.conf.5.xml:604 msgid "Debug options" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:601 +#: apt.conf.5.xml:606 msgid "" "Enabling options in the <literal>Debug::</literal> section will cause " "debugging information to be sent to the standard error stream of the program " @@ -5254,7 +5259,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:612 +#: apt.conf.5.xml:617 msgid "" "<literal>Debug::pkgProblemResolver</literal> enables output about the " "decisions made by <literal>dist-upgrade, upgrade, install, remove, " @@ -5262,7 +5267,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:620 +#: apt.conf.5.xml:625 msgid "" "<literal>Debug::NoLocking</literal> disables all file locking. This can be " "used to run some operations (for instance, <literal>apt-get -s " @@ -5270,7 +5275,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:629 +#: apt.conf.5.xml:634 msgid "" "<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each " "time that <literal>apt</literal> invokes &dpkg;." @@ -5280,110 +5285,110 @@ msgstr "" #. motivating example, except I haven't a clue why you'd want #. to do this. #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:637 +#: apt.conf.5.xml:642 msgid "" "<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data " "in CDROM IDs." msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:647 +#: apt.conf.5.xml:652 msgid "A full list of debugging options to apt follows." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:652 +#: apt.conf.5.xml:657 msgid "<literal>Debug::Acquire::cdrom</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:656 +#: apt.conf.5.xml:661 msgid "Print information related to accessing <literal>cdrom://</literal> sources." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:663 +#: apt.conf.5.xml:668 msgid "<literal>Debug::Acquire::ftp</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:667 +#: apt.conf.5.xml:672 msgid "Print information related to downloading packages using FTP." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:674 +#: apt.conf.5.xml:679 msgid "<literal>Debug::Acquire::http</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:678 +#: apt.conf.5.xml:683 msgid "Print information related to downloading packages using HTTP." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:685 +#: apt.conf.5.xml:690 msgid "<literal>Debug::Acquire::https</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:689 +#: apt.conf.5.xml:694 msgid "Print information related to downloading packages using HTTPS." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:696 +#: apt.conf.5.xml:701 msgid "<literal>Debug::Acquire::gpgv</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:700 +#: apt.conf.5.xml:705 msgid "" "Print information related to verifying cryptographic signatures using " "<literal>gpg</literal>." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:707 +#: apt.conf.5.xml:712 msgid "<literal>Debug::aptcdrom</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:711 +#: apt.conf.5.xml:716 msgid "" "Output information about the process of accessing collections of packages " "stored on CD-ROMs." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:718 +#: apt.conf.5.xml:723 msgid "<literal>Debug::BuildDeps</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:721 +#: apt.conf.5.xml:726 msgid "Describes the process of resolving build-dependencies in &apt-get;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:728 +#: apt.conf.5.xml:733 msgid "<literal>Debug::Hashes</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:731 +#: apt.conf.5.xml:736 msgid "" "Output each cryptographic hash that is generated by the " "<literal>apt</literal> libraries." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:738 +#: apt.conf.5.xml:743 msgid "<literal>Debug::IdentCDROM</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:741 +#: apt.conf.5.xml:746 msgid "" "Do not include information from <literal>statfs</literal>, namely the number " "of used and free blocks on the CD-ROM filesystem, when generating an ID for " @@ -5391,92 +5396,92 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:749 +#: apt.conf.5.xml:754 msgid "<literal>Debug::NoLocking</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:752 +#: apt.conf.5.xml:757 msgid "" "Disable all file locking. For instance, this will allow two instances of " "<quote><literal>apt-get update</literal></quote> to run at the same time." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:760 +#: apt.conf.5.xml:765 msgid "<literal>Debug::pkgAcquire</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:764 +#: apt.conf.5.xml:769 msgid "Log when items are added to or removed from the global download queue." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:771 +#: apt.conf.5.xml:776 msgid "<literal>Debug::pkgAcquire::Auth</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:774 +#: apt.conf.5.xml:779 msgid "" "Output status messages and errors related to verifying checksums and " "cryptographic signatures of downloaded files." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:781 +#: apt.conf.5.xml:786 msgid "<literal>Debug::pkgAcquire::Diffs</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:784 +#: apt.conf.5.xml:789 msgid "" "Output information about downloading and applying package index list diffs, " "and errors relating to package index list diffs." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:792 +#: apt.conf.5.xml:797 msgid "<literal>Debug::pkgAcquire::RRed</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:796 +#: apt.conf.5.xml:801 msgid "" "Output information related to patching apt package lists when downloading " "index diffs instead of full indices." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:803 +#: apt.conf.5.xml:808 msgid "<literal>Debug::pkgAcquire::Worker</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:807 +#: apt.conf.5.xml:812 msgid "Log all interactions with the sub-processes that actually perform downloads." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:814 +#: apt.conf.5.xml:819 msgid "<literal>Debug::pkgAutoRemove</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:818 +#: apt.conf.5.xml:823 msgid "" "Log events related to the automatically-installed status of packages and to " "the removal of unused packages." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:825 +#: apt.conf.5.xml:830 msgid "<literal>Debug::pkgDepCache::AutoInstall</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:828 +#: apt.conf.5.xml:833 msgid "" "Generate debug messages describing which packages are being automatically " "installed to resolve dependencies. This corresponds to the initial " @@ -5486,12 +5491,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:839 +#: apt.conf.5.xml:844 msgid "<literal>Debug::pkgDepCache::Marker</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:842 +#: apt.conf.5.xml:847 msgid "" "Generate debug messages describing which package is marked as " "keep/install/remove while the ProblemResolver does his work. Each addition " @@ -5509,90 +5514,90 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:861 +#: apt.conf.5.xml:866 msgid "<literal>Debug::pkgInitConfig</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:864 +#: apt.conf.5.xml:869 msgid "Dump the default configuration to standard error on startup." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:871 +#: apt.conf.5.xml:876 msgid "<literal>Debug::pkgDPkgPM</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:874 +#: apt.conf.5.xml:879 msgid "" "When invoking &dpkg;, output the precise command line with which it is being " "invoked, with arguments separated by a single space character." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:882 +#: apt.conf.5.xml:887 msgid "<literal>Debug::pkgDPkgProgressReporting</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:885 +#: apt.conf.5.xml:890 msgid "" "Output all the data received from &dpkg; on the status file descriptor and " "any errors encountered while parsing it." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:892 +#: apt.conf.5.xml:897 msgid "<literal>Debug::pkgOrderList</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:896 +#: apt.conf.5.xml:901 msgid "" "Generate a trace of the algorithm that decides the order in which " "<literal>apt</literal> should pass packages to &dpkg;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:904 +#: apt.conf.5.xml:909 msgid "<literal>Debug::pkgPackageManager</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:908 +#: apt.conf.5.xml:913 msgid "Output status messages tracing the steps performed when invoking &dpkg;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:915 +#: apt.conf.5.xml:920 msgid "<literal>Debug::pkgPolicy</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:919 +#: apt.conf.5.xml:924 msgid "Output the priority of each package list on startup." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:925 +#: apt.conf.5.xml:930 msgid "<literal>Debug::pkgProblemResolver</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:929 +#: apt.conf.5.xml:934 msgid "" "Trace the execution of the dependency resolver (this applies only to what " "happens when a complex dependency problem is encountered)." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:937 +#: apt.conf.5.xml:942 msgid "<literal>Debug::pkgProblemResolver::ShowScores</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:940 +#: apt.conf.5.xml:945 msgid "" "Display a list of all installed packages with their calculated score used by " "the pkgProblemResolver. The description of the package is the same as " @@ -5600,32 +5605,32 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:948 +#: apt.conf.5.xml:953 msgid "<literal>Debug::sourceList</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:952 +#: apt.conf.5.xml:957 msgid "" "Print information about the vendors read from " "<filename>/etc/apt/vendors.list</filename>." msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:974 +#: apt.conf.5.xml:979 msgid "" "&configureindex; is a configuration file showing example values for all " "possible options." msgstr "" #. type: Content of: <refentry><refsect1><variablelist> -#: apt.conf.5.xml:981 +#: apt.conf.5.xml:986 msgid "&file-aptconf;" msgstr "" #. ? reading apt.conf #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:986 +#: apt.conf.5.xml:991 msgid "&apt-cache;, &apt-config;, &apt-preferences;." msgstr "" @@ -6751,6 +6756,25 @@ msgid "" "file transfers from the remote." msgstr "" +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: sources.list.5.xml:178 +msgid "more recongnizable URI types" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:180 +msgid "" +"APT can be extended with more methods shipped in other optional packages " +"which should follow the nameing scheme " +"<literal>apt-transport-<replaceable>method</replaceable></literal>. The APT " +"team e.g. maintain also the <literal>apt-transport-https</literal> package " +"which provides access methods for https-URIs with features similiar to the " +"http method, but other methods for using e.g. debtorrent are also available, " +"see <citerefentry> " +"<refentrytitle><filename>apt-transport-debtorrent</filename></refentrytitle> " +"<manvolnum>1</manvolnum></citerefentry>." +msgstr "" + #. type: Content of: <refentry><refsect1><para> #: sources.list.5.xml:122 msgid "" @@ -6759,68 +6783,68 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:182 +#: sources.list.5.xml:194 msgid "" "Uses the archive stored locally (or NFS mounted) at /home/jason/debian for " "stable/main, stable/contrib, and stable/non-free." msgstr "" #. type: Content of: <refentry><refsect1><literallayout> -#: sources.list.5.xml:184 +#: sources.list.5.xml:196 #, no-wrap msgid "deb file:/home/jason/debian stable main contrib non-free" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:186 +#: sources.list.5.xml:198 msgid "As above, except this uses the unstable (development) distribution." msgstr "" #. type: Content of: <refentry><refsect1><literallayout> -#: sources.list.5.xml:187 +#: sources.list.5.xml:199 #, no-wrap msgid "deb file:/home/jason/debian unstable main contrib non-free" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:189 +#: sources.list.5.xml:201 msgid "Source line for the above" msgstr "" #. type: Content of: <refentry><refsect1><literallayout> -#: sources.list.5.xml:190 +#: sources.list.5.xml:202 #, no-wrap msgid "deb-src file:/home/jason/debian unstable main contrib non-free" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:192 +#: sources.list.5.xml:204 msgid "" "Uses HTTP to access the archive at archive.debian.org, and uses only the " "hamm/main area." msgstr "" #. type: Content of: <refentry><refsect1><literallayout> -#: sources.list.5.xml:194 +#: sources.list.5.xml:206 #, no-wrap msgid "deb http://archive.debian.org/debian-archive hamm main" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:196 +#: sources.list.5.xml:208 msgid "" "Uses FTP to access the archive at ftp.debian.org, under the debian " "directory, and uses only the stable/contrib area." msgstr "" #. type: Content of: <refentry><refsect1><literallayout> -#: sources.list.5.xml:198 +#: sources.list.5.xml:210 #, no-wrap msgid "deb ftp://ftp.debian.org/debian stable contrib" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:200 +#: sources.list.5.xml:212 msgid "" "Uses FTP to access the archive at ftp.debian.org, under the debian " "directory, and uses only the unstable/contrib area. If this line appears as " @@ -6830,20 +6854,20 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><literallayout> -#: sources.list.5.xml:204 +#: sources.list.5.xml:216 #, no-wrap msgid "deb ftp://ftp.debian.org/debian unstable contrib" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:206 +#: sources.list.5.xml:218 msgid "" "Uses HTTP to access the archive at nonus.debian.org, under the debian-non-US " "directory." msgstr "" #. type: Content of: <refentry><refsect1><literallayout> -#: sources.list.5.xml:208 +#: sources.list.5.xml:220 #, no-wrap msgid "" "deb http://nonus.debian.org/debian-non-US stable/non-US main contrib " @@ -6851,13 +6875,13 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><literallayout> -#: sources.list.5.xml:217 +#: sources.list.5.xml:229 #, no-wrap msgid "deb http://ftp.de.debian.org/debian-non-US unstable/binary-$(ARCH)/" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:210 +#: sources.list.5.xml:222 msgid "" "Uses HTTP to access the archive at nonus.debian.org, under the debian-non-US " "directory, and uses only files found under " @@ -6869,7 +6893,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:222 +#: sources.list.5.xml:234 msgid "&apt-cache; &apt-conf;" msgstr "" diff --git a/doc/po/fr.po b/doc/po/fr.po index ba229a6e3..89cd1df34 100644 --- a/doc/po/fr.po +++ b/doc/po/fr.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" -"POT-Creation-Date: 2009-10-01 20:13+0300\n" +"POT-Creation-Date: 2009-10-14 07:44+0300\n" "PO-Revision-Date: 2009-09-26 19:25+0200\n" "Last-Translator: Christian Perrier <bubulle@debian.org>\n" "Language-Team: French <debian-l10n-french@lists.debian.org>\n" @@ -672,6 +672,7 @@ msgstr "" "<!ENTITY apt-author.team \"\n" " <author>\n" " <othername>Équipe de développement d'APT</othername>\n" +" <contrib></contrib>\n" " </author>\n" "\">\n" @@ -1677,7 +1678,7 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt-cache.8.xml:281 apt-config.8.xml:93 apt-extracttemplates.1.xml:56 #: apt-ftparchive.1.xml:492 apt-get.8.xml:319 apt-mark.8.xml:89 -#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:447 apt.conf.5.xml:469 +#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:452 apt.conf.5.xml:474 msgid "options" msgstr "options" @@ -1923,7 +1924,7 @@ msgstr "&apt-commonoptions;" #. type: Content of: <refentry><refsect1><title> #: apt-cache.8.xml:361 apt-get.8.xml:559 apt-key.8.xml:138 apt-mark.8.xml:122 -#: apt.conf.5.xml:979 apt_preferences.5.xml:615 +#: apt.conf.5.xml:984 apt_preferences.5.xml:615 msgid "Files" msgstr "Fichiers" @@ -1936,8 +1937,8 @@ msgstr "&file-sourceslist; &file-statelists;" #: apt-cache.8.xml:368 apt-cdrom.8.xml:155 apt-config.8.xml:103 #: apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:563 apt-get.8.xml:569 #: apt-key.8.xml:162 apt-mark.8.xml:133 apt-secure.8.xml:181 -#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:985 apt_preferences.5.xml:622 -#: sources.list.5.xml:221 +#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:990 apt_preferences.5.xml:622 +#: sources.list.5.xml:233 msgid "See Also" msgstr "Voir aussi" @@ -3523,8 +3524,8 @@ msgstr "" "configuration : <literal>APT::FTPArchive::ReadOnlyDB</literal>." #. type: Content of: <refentry><refsect1><title> -#: apt-ftparchive.1.xml:552 apt.conf.5.xml:973 apt_preferences.5.xml:462 -#: sources.list.5.xml:181 +#: apt-ftparchive.1.xml:552 apt.conf.5.xml:978 apt_preferences.5.xml:462 +#: sources.list.5.xml:193 msgid "Examples" msgstr "Exemples" @@ -5592,14 +5593,27 @@ msgstr "" #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:56 +#, fuzzy +#| msgid "" +#| "Syntactically the configuration language is modeled after what the ISC " +#| "tools such as bind and dhcp use. Lines starting with <literal>//</" +#| "literal> are treated as comments (ignored), as well as all text between " +#| "<literal>/*</literal> and <literal>*/</literal>, just like C/C++ " +#| "comments. Each line is of the form <literal>APT::Get::Assume-Yes \"true" +#| "\";</literal> The trailing semicolon is required and the quotes are " +#| "optional. A new scope can be opened with curly braces, like:" msgid "" "Syntactically the configuration language is modeled after what the ISC tools " "such as bind and dhcp use. Lines starting with <literal>//</literal> are " "treated as comments (ignored), as well as all text between <literal>/*</" "literal> and <literal>*/</literal>, just like C/C++ comments. Each line is " "of the form <literal>APT::Get::Assume-Yes \"true\";</literal> The trailing " -"semicolon is required and the quotes are optional. A new scope can be opened " -"with curly braces, like:" +"semicolon and the quotes are required. The value must be on one line, and " +"there is no kind of string concatenation. It must not include inside " +"quotes. The behavior of the backslash \"\\\" and escaped characters inside " +"a value is undefined and it should not be used. An option name may include " +"alphanumerical characters and the \"/-:._+\" characters. A new scope can be " +"opened with curly braces, like:" msgstr "" "Syntaxiquement, le langage de configuration est conçu sur le même modèle que " "les langages utilisés par des outils ISC tels que bind et dhcp. Une ligne " @@ -5612,7 +5626,7 @@ msgstr "" "comme suit :" #. type: Content of: <refentry><refsect1><informalexample><programlisting> -#: apt.conf.5.xml:66 +#: apt.conf.5.xml:70 #, no-wrap msgid "" "APT {\n" @@ -5630,7 +5644,7 @@ msgstr "" "};\n" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:74 +#: apt.conf.5.xml:78 msgid "" "with newlines placed to make it more readable. Lists can be created by " "opening a scope and including a single string enclosed in quotes followed by " @@ -5641,13 +5655,13 @@ msgstr "" "guillemets suivie d'un point virgule pour chaque élément de la liste." #. type: Content of: <refentry><refsect1><informalexample><programlisting> -#: apt.conf.5.xml:79 +#: apt.conf.5.xml:83 #, no-wrap msgid "DPkg::Pre-Install-Pkgs {\"/usr/sbin/dpkg-preconfigure --apt\";};\n" msgstr "DPkg::Pre-Install-Pkgs {\"/usr/sbin/dpkg-preconfigure --apt\";};\n" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:82 +#: apt.conf.5.xml:86 msgid "" "In general the sample configuration file in <filename>&docdir;examples/apt." "conf</filename> &configureindex; is a good guide for how it should look." @@ -5657,7 +5671,7 @@ msgstr "" "configuration." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:86 +#: apt.conf.5.xml:90 msgid "" "The names of the configuration items are not case-sensitive. So in the " "previous example you could use <literal>dpkg::pre-install-pkgs</literal>." @@ -5667,7 +5681,7 @@ msgstr "" "<literal>dpkg::pre-install-pkgs</literal>." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:89 +#: apt.conf.5.xml:93 msgid "" "Names for the configuration items are optional if a list is defined as it " "can be see in the <literal>DPkg::Pre-Install-Pkgs</literal> example above. " @@ -5677,7 +5691,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:94 +#: apt.conf.5.xml:98 #, fuzzy #| msgid "" #| "Two specials are allowed, <literal>#include</literal> and " @@ -5687,7 +5701,8 @@ msgstr "" #| "configuration tree. The specified element and all its descendents are " #| "erased." msgid "" -"Two specials are allowed, <literal>#include</literal> and <literal>#clear</" +"Two specials are allowed, <literal>#include</literal> (which is deprecated " +"and not supported by alternative implementations) and <literal>#clear</" "literal>: <literal>#include</literal> will include the given file, unless " "the filename ends in a slash, then the whole directory is included. " "<literal>#clear</literal> is used to erase a part of the configuration tree. " @@ -5702,7 +5717,7 @@ msgstr "" "ses descendants sont supprimés." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:101 +#: apt.conf.5.xml:106 msgid "" "The #clear command is the only way to delete a list or a complete scope. " "Reopening a scope or the ::-style described below will <emphasis>not</" @@ -5712,7 +5727,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:106 +#: apt.conf.5.xml:111 #, fuzzy #| msgid "" #| "All of the APT tools take a -o option which allows an arbitrary " @@ -5736,7 +5751,7 @@ msgstr "" "liste." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:113 +#: apt.conf.5.xml:118 msgid "" "Note that you can use :: only for appending one item per line to a list and " "that you should not use it in combination with the scope syntax. (The scope " @@ -5753,12 +5768,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:125 +#: apt.conf.5.xml:130 msgid "The APT Group" msgstr "Le groupe APT" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:126 +#: apt.conf.5.xml:131 msgid "" "This group of options controls general APT behavior as well as holding the " "options for all of the tools." @@ -5767,12 +5782,12 @@ msgstr "" "également des options communes à tous les outils." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:130 +#: apt.conf.5.xml:135 msgid "Architecture" msgstr "Architecture" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:131 +#: apt.conf.5.xml:136 msgid "" "System Architecture; sets the architecture to use when fetching files and " "parsing package lists. The internal default is the architecture apt was " @@ -5783,12 +5798,12 @@ msgstr "" "valeur interne par défaut est l'architecture pour laquelle APT a été compilé." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:136 +#: apt.conf.5.xml:141 msgid "Default-Release" msgstr "Default-Release" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:137 +#: apt.conf.5.xml:142 msgid "" "Default release to install packages from if more than one version available. " "Contains release name, codename or release version. Examples: 'stable', " @@ -5801,12 +5816,12 @@ msgstr "" "« 4.0 », « 5.0* ». Voir aussi &apt-preferences;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:141 +#: apt.conf.5.xml:146 msgid "Ignore-Hold" msgstr "Ignore-Hold" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:142 +#: apt.conf.5.xml:147 msgid "" "Ignore Held packages; This global option causes the problem resolver to " "ignore held packages in its decision making." @@ -5816,12 +5831,12 @@ msgstr "" "décision." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:146 +#: apt.conf.5.xml:151 msgid "Clean-Installed" msgstr "Clean-Installed" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:147 +#: apt.conf.5.xml:152 msgid "" "Defaults to on. When turned on the autoclean feature will remove any " "packages which can no longer be downloaded from the cache. If turned off " @@ -5835,12 +5850,12 @@ msgstr "" "les réinstaller." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:153 +#: apt.conf.5.xml:158 msgid "Immediate-Configure" msgstr "Immediate-Configure" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:154 +#: apt.conf.5.xml:159 msgid "" "Defaults to on which will cause APT to install essential and important " "packages as fast as possible in the install/upgrade operation. This is done " @@ -5867,12 +5882,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:172 +#: apt.conf.5.xml:177 msgid "Force-LoopBreak" msgstr "Force-LoopBreak" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:173 +#: apt.conf.5.xml:178 msgid "" "Never Enable this option unless you -really- know what you are doing. It " "permits APT to temporarily remove an essential package to break a Conflicts/" @@ -5890,12 +5905,12 @@ msgstr "" "ces paquets dépendent." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:181 +#: apt.conf.5.xml:186 msgid "Cache-Limit" msgstr "Cache-Limit" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:182 +#: apt.conf.5.xml:187 msgid "" "APT uses a fixed size memory mapped cache file to store the 'available' " "information. This sets the size of that cache (in bytes)." @@ -5905,24 +5920,24 @@ msgstr "" "mémoire allouée pour le chargement de ce cache." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:186 +#: apt.conf.5.xml:191 msgid "Build-Essential" msgstr "Build-Essential" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:187 +#: apt.conf.5.xml:192 msgid "Defines which package(s) are considered essential build dependencies." msgstr "" "Cette option définit les paquets qui sont considérés comme faisant partie " "des dépendances essentielles pour la construction de paquets." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:190 +#: apt.conf.5.xml:195 msgid "Get" msgstr "Get" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:191 +#: apt.conf.5.xml:196 msgid "" "The Get subsection controls the &apt-get; tool, please see its documentation " "for more information about the options here." @@ -5932,12 +5947,12 @@ msgstr "" "question." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:195 +#: apt.conf.5.xml:200 msgid "Cache" msgstr "Cache" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:196 +#: apt.conf.5.xml:201 msgid "" "The Cache subsection controls the &apt-cache; tool, please see its " "documentation for more information about the options here." @@ -5947,12 +5962,12 @@ msgstr "" "options en question." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:200 +#: apt.conf.5.xml:205 msgid "CDROM" msgstr "CDROM" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:201 +#: apt.conf.5.xml:206 msgid "" "The CDROM subsection controls the &apt-cdrom; tool, please see its " "documentation for more information about the options here." @@ -5962,17 +5977,17 @@ msgstr "" "options en question." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:207 +#: apt.conf.5.xml:212 msgid "The Acquire Group" msgstr "Le groupe Acquire" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:212 +#: apt.conf.5.xml:217 msgid "PDiffs" msgstr "PDiffs" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:213 +#: apt.conf.5.xml:218 msgid "" "Try to download deltas called <literal>PDiffs</literal> for Packages or " "Sources files instead of downloading whole ones. True by default." @@ -5982,12 +5997,12 @@ msgstr "" "télécharger entièrement. Par défaut à « true »." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:218 +#: apt.conf.5.xml:223 msgid "Queue-Mode" msgstr "Queue-Mode" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:219 +#: apt.conf.5.xml:224 msgid "" "Queuing mode; <literal>Queue-Mode</literal> can be one of <literal>host</" "literal> or <literal>access</literal> which determines how APT parallelizes " @@ -6003,12 +6018,12 @@ msgstr "" "initiée." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:226 +#: apt.conf.5.xml:231 msgid "Retries" msgstr "Retries" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:227 +#: apt.conf.5.xml:232 msgid "" "Number of retries to perform. If this is non-zero APT will retry failed " "files the given number of times." @@ -6018,12 +6033,12 @@ msgstr "" "échoué." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:231 +#: apt.conf.5.xml:236 msgid "Source-Symlinks" msgstr "Source-Symlinks" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:232 +#: apt.conf.5.xml:237 msgid "" "Use symlinks for source archives. If set to true then source archives will " "be symlinked when possible instead of copying. True is the default." @@ -6033,12 +6048,12 @@ msgstr "" "archives de sources au lieu de les copier. Par défaut à « true »." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:236 sources.list.5.xml:139 +#: apt.conf.5.xml:241 sources.list.5.xml:139 msgid "http" msgstr "http" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:237 +#: apt.conf.5.xml:242 #, fuzzy #| msgid "" #| "HTTP URIs; http::Proxy is the default http proxy to use. It is in the " @@ -6065,7 +6080,7 @@ msgstr "" "les options de mandataire HTTP." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:245 +#: apt.conf.5.xml:250 msgid "" "Three settings are provided for cache control with HTTP/1.1 compliant proxy " "caches. <literal>No-Cache</literal> tells the proxy to not use its cached " @@ -6090,7 +6105,7 @@ msgstr "" "en compte aucune de ces options." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:255 apt.conf.5.xml:312 +#: apt.conf.5.xml:260 apt.conf.5.xml:317 msgid "" "The option <literal>timeout</literal> sets the timeout timer used by the " "method, this applies to all things including connection timeout and data " @@ -6100,7 +6115,7 @@ msgstr "" "(timeout) utilisé par la méthode. Cela vaut pour tout, connexion et données." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:258 +#: apt.conf.5.xml:263 msgid "" "One setting is provided to control the pipeline depth in cases where the " "remote server is not RFC conforming or buggy (such as Squid 2.0.2) " @@ -6120,7 +6135,7 @@ msgstr "" "option ne respectent pas la RFC 2068." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:266 +#: apt.conf.5.xml:271 msgid "" "The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</" "literal> which accepts integer values in kilobyte. The default value is 0 " @@ -6130,12 +6145,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:272 +#: apt.conf.5.xml:277 msgid "https" msgstr "https" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:273 +#: apt.conf.5.xml:278 msgid "" "HTTPS URIs. Cache-control and proxy options are the same as for " "<literal>http</literal> method. <literal>Pipeline-Depth</literal> option is " @@ -6146,7 +6161,7 @@ msgstr "" "<literal>Pipeline-Depth</literal> n'est pas encore supportée." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:277 +#: apt.conf.5.xml:282 msgid "" "<literal>CaInfo</literal> suboption specifies place of file that holds info " "about trusted certificates. <literal><host>::CaInfo</literal> is " @@ -6178,12 +6193,12 @@ msgstr "" "ou 'SSLv3'." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:295 sources.list.5.xml:150 +#: apt.conf.5.xml:300 sources.list.5.xml:150 msgid "ftp" msgstr "ftp" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:296 +#: apt.conf.5.xml:301 #, fuzzy #| msgid "" #| "FTP URIs; ftp::Proxy is the default proxy server to use. It is in the " @@ -6231,7 +6246,7 @@ msgstr "" "respectif de l'URI." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:315 +#: apt.conf.5.xml:320 msgid "" "Several settings are provided to control passive mode. Generally it is safe " "to leave passive mode on, it works in nearly every environment. However " @@ -6248,7 +6263,7 @@ msgstr "" "modèle de fichier de configuration)." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:322 +#: apt.conf.5.xml:327 msgid "" "It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</" "envar> environment variable to a http url - see the discussion of the http " @@ -6263,7 +6278,7 @@ msgstr "" "de cette méthode." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:327 +#: apt.conf.5.xml:332 msgid "" "The setting <literal>ForceExtended</literal> controls the use of RFC2428 " "<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is " @@ -6279,18 +6294,19 @@ msgstr "" "des serveurs FTP ne suivent pas la RFC 2428." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:334 sources.list.5.xml:132 +#: apt.conf.5.xml:339 sources.list.5.xml:132 msgid "cdrom" msgstr "cdrom" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:340 -#, no-wrap -msgid "\"/cdrom/\"::Mount \"foo\";" +#: apt.conf.5.xml:345 +#, fuzzy, no-wrap +#| msgid "\"/cdrom/\"::Mount \"foo\";" +msgid "/cdrom/::Mount \"foo\";" msgstr "\"/cdrom/\"::Mount \"foo\";" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:335 +#: apt.conf.5.xml:340 msgid "" "CDROM URIs; the only setting for CDROM URIs is the mount point, " "<literal>cdrom::Mount</literal> which must be the mount point for the CDROM " @@ -6312,12 +6328,12 @@ msgstr "" "spécifiées en utilisant <literal>UMount</literal>." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:345 +#: apt.conf.5.xml:350 msgid "gpgv" msgstr "gpgv" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:346 +#: apt.conf.5.xml:351 msgid "" "GPGV URIs; the only option for GPGV URIs is the option to pass additional " "parameters to gpgv. <literal>gpgv::Options</literal> Additional options " @@ -6328,18 +6344,18 @@ msgstr "" "supplémentaires passées à gpgv." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:351 +#: apt.conf.5.xml:356 msgid "CompressionTypes" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:357 +#: apt.conf.5.xml:362 #, no-wrap msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:352 +#: apt.conf.5.xml:357 msgid "" "List of compression types which are understood by the acquire methods. " "Files like <filename>Packages</filename> can be available in various " @@ -6351,19 +6367,19 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:362 +#: apt.conf.5.xml:367 #, no-wrap msgid "Acquire::CompressionTypes::Order:: \"gz\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:365 +#: apt.conf.5.xml:370 #, no-wrap msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:358 +#: apt.conf.5.xml:363 msgid "" "Also the <literal>Order</literal> subgroup can be used to define in which " "order the acquire system will try to download the compressed files. The " @@ -6380,13 +6396,13 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:369 +#: apt.conf.5.xml:374 #, no-wrap msgid "Dir::Bin::bzip2 \"/bin/bzip2\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:367 +#: apt.conf.5.xml:372 msgid "" "Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</" "replaceable></literal> will be checked: If this setting exists the method " @@ -6401,7 +6417,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:374 +#: apt.conf.5.xml:379 msgid "" "While it is possible to add an empty compression type to the order list, but " "APT in its current version doesn't understand it correctly and will display " @@ -6411,7 +6427,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:208 +#: apt.conf.5.xml:213 msgid "" "The <literal>Acquire</literal> group of options controls the download of " "packages and the URI handlers. <placeholder type=\"variablelist\" id=\"0\"/>" @@ -6421,12 +6437,12 @@ msgstr "" "id=\"0\"/>" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:383 +#: apt.conf.5.xml:388 msgid "Directories" msgstr "Les répertoires" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:385 +#: apt.conf.5.xml:390 msgid "" "The <literal>Dir::State</literal> section has directories that pertain to " "local state information. <literal>lists</literal> is the directory to place " @@ -6446,7 +6462,7 @@ msgstr "" "filename>." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:392 +#: apt.conf.5.xml:397 msgid "" "<literal>Dir::Cache</literal> contains locations pertaining to local cache " "information, such as the two package caches <literal>srcpkgcache</literal> " @@ -6469,7 +6485,7 @@ msgstr "" "literal>." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:401 +#: apt.conf.5.xml:406 msgid "" "<literal>Dir::Etc</literal> contains the location of configuration files, " "<literal>sourcelist</literal> gives the location of the sourcelist and " @@ -6484,7 +6500,7 @@ msgstr "" "fichier de configuration indiqué par la variable <envar>APT_CONFIG</envar>)." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:407 +#: apt.conf.5.xml:412 msgid "" "The <literal>Dir::Parts</literal> setting reads in all the config fragments " "in lexical order from the directory specified. After this is done then the " @@ -6495,7 +6511,7 @@ msgstr "" "configuration est chargé." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:411 +#: apt.conf.5.xml:416 #, fuzzy #| msgid "" #| "Binary programs are pointed to by <literal>Dir::Bin</literal>. " @@ -6520,7 +6536,7 @@ msgstr "" "l'emplacement des programmes correspondants." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:419 +#: apt.conf.5.xml:424 msgid "" "The configuration item <literal>RootDir</literal> has a special meaning. If " "set, all paths in <literal>Dir::</literal> will be relative to " @@ -6542,12 +6558,12 @@ msgstr "" "staging/var/lib/dpkg/status</filename>." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:432 +#: apt.conf.5.xml:437 msgid "APT in DSelect" msgstr "APT et DSelect" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:434 +#: apt.conf.5.xml:439 msgid "" "When APT is used as a &dselect; method several configuration directives " "control the default behaviour. These are in the <literal>DSelect</literal> " @@ -6558,12 +6574,12 @@ msgstr "" "<literal>DSelect</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:438 +#: apt.conf.5.xml:443 msgid "Clean" msgstr "Clean" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:439 +#: apt.conf.5.xml:444 msgid "" "Cache Clean mode; this value may be one of always, prompt, auto, pre-auto " "and never. always and prompt will remove all packages from the cache after " @@ -6581,7 +6597,7 @@ msgstr "" "supprime avant de récupérer de nouveaux paquets." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:448 +#: apt.conf.5.xml:453 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the install phase." @@ -6590,12 +6606,12 @@ msgstr "" "&apt-get; lors de la phase d'installation." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:452 +#: apt.conf.5.xml:457 msgid "Updateoptions" msgstr "UpdateOptions" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:453 +#: apt.conf.5.xml:458 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the update phase." @@ -6604,12 +6620,12 @@ msgstr "" "&apt-get; lors de la phase de mise à jour." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:457 +#: apt.conf.5.xml:462 msgid "PromptAfterUpdate" msgstr "PromptAfterUpdate" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:458 +#: apt.conf.5.xml:463 msgid "" "If true the [U]pdate operation in &dselect; will always prompt to continue. " "The default is to prompt only on error." @@ -6619,12 +6635,12 @@ msgstr "" "d'erreur que l'on propose à l'utilisateur d'intervenir." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:464 +#: apt.conf.5.xml:469 msgid "How APT calls dpkg" msgstr "Méthode d'appel de &dpkg; par APT" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:465 +#: apt.conf.5.xml:470 msgid "" "Several configuration directives control how APT invokes &dpkg;. These are " "in the <literal>DPkg</literal> section." @@ -6633,7 +6649,7 @@ msgstr "" "&dpkg; : elles figurent dans la section <literal>DPkg</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:470 +#: apt.conf.5.xml:475 msgid "" "This is a list of options to pass to dpkg. The options must be specified " "using the list notation and each list item is passed as a single argument to " @@ -6644,17 +6660,17 @@ msgstr "" "est passé comme un seul paramètre à &dpkg;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:475 +#: apt.conf.5.xml:480 msgid "Pre-Invoke" msgstr "Pre-Invoke" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:475 +#: apt.conf.5.xml:480 msgid "Post-Invoke" msgstr "Post-Invoke" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:476 +#: apt.conf.5.xml:481 msgid "" "This is a list of shell commands to run before/after invoking &dpkg;. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -6667,12 +6683,12 @@ msgstr "" "<filename>/bin/sh</filename> : APT s'arrête dès que l'une d'elles échoue." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:482 +#: apt.conf.5.xml:487 msgid "Pre-Install-Pkgs" msgstr "Pre-Install-Pkgs" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:483 +#: apt.conf.5.xml:488 msgid "" "This is a list of shell commands to run before invoking dpkg. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -6688,7 +6704,7 @@ msgstr "" "qu'il va installer, à raison d'un par ligne." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:489 +#: apt.conf.5.xml:494 msgid "" "Version 2 of this protocol dumps more information, including the protocol " "version, the APT configuration space and the packages, files and versions " @@ -6704,12 +6720,12 @@ msgstr "" "literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:496 +#: apt.conf.5.xml:501 msgid "Run-Directory" msgstr "Run-Directory" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:497 +#: apt.conf.5.xml:502 msgid "" "APT chdirs to this directory before invoking dpkg, the default is <filename>/" "</filename>." @@ -6718,12 +6734,12 @@ msgstr "" "le répertoire <filename>/</filename>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:501 +#: apt.conf.5.xml:506 msgid "Build-options" msgstr "Build-options" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:502 +#: apt.conf.5.xml:507 msgid "" "These options are passed to &dpkg-buildpackage; when compiling packages, the " "default is to disable signing and produce all binaries." @@ -6733,12 +6749,12 @@ msgstr "" "créés." #. type: Content of: <refentry><refsect1><refsect2><title> -#: apt.conf.5.xml:507 +#: apt.conf.5.xml:512 msgid "dpkg trigger usage (and related options)" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:508 +#: apt.conf.5.xml:513 msgid "" "APT can call dpkg in a way so it can make aggressive use of triggers over " "multiply calls of dpkg. Without further options dpkg will use triggers only " @@ -6753,7 +6769,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para><literallayout> -#: apt.conf.5.xml:523 +#: apt.conf.5.xml:528 #, no-wrap msgid "" "DPkg::NoTriggers \"true\";\n" @@ -6763,7 +6779,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:517 +#: apt.conf.5.xml:522 msgid "" "Note that it is not guaranteed that APT will support these options or that " "these options will not cause (big) trouble in the future. If you have " @@ -6777,12 +6793,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:529 +#: apt.conf.5.xml:534 msgid "DPkg::NoTriggers" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:530 +#: apt.conf.5.xml:535 msgid "" "Add the no triggers flag to all dpkg calls (expect the ConfigurePending " "call). See &dpkg; if you are interested in what this actually means. In " @@ -6794,14 +6810,14 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:537 +#: apt.conf.5.xml:542 #, fuzzy #| msgid "Packages::Compress" msgid "PackageManager::Configure" msgstr "Packages::Compress" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:538 +#: apt.conf.5.xml:543 msgid "" "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " "and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default " @@ -6817,12 +6833,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:548 +#: apt.conf.5.xml:553 msgid "DPkg::ConfigurePending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:549 +#: apt.conf.5.xml:554 msgid "" "If this option is set apt will call <command>dpkg --configure --pending</" "command> to let dpkg handle all required configurations and triggers. This " @@ -6833,12 +6849,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:555 +#: apt.conf.5.xml:560 msgid "DPkg::TriggersPending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:556 +#: apt.conf.5.xml:561 msgid "" "Useful for <literal>smart</literal> configuration as a package which has " "pending triggers is not considered as <literal>installed</literal> and dpkg " @@ -6848,12 +6864,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:561 +#: apt.conf.5.xml:566 msgid "PackageManager::UnpackAll" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:562 +#: apt.conf.5.xml:567 msgid "" "As the configuration can be deferred to be done at the end by dpkg it can be " "tried to order the unpack series only by critical needs, e.g. by Pre-" @@ -6865,12 +6881,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:569 +#: apt.conf.5.xml:574 msgid "OrderList::Score::Immediate" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:577 +#: apt.conf.5.xml:582 #, no-wrap msgid "" "OrderList::Score {\n" @@ -6882,7 +6898,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:570 +#: apt.conf.5.xml:575 msgid "" "Essential packages (and there dependencies) should be configured immediately " "after unpacking. It will be a good idea to do this quite early in the " @@ -6896,12 +6912,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:590 +#: apt.conf.5.xml:595 msgid "Periodic and Archives options" msgstr "Options « Periodic » et « Archive »" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:591 +#: apt.conf.5.xml:596 msgid "" "<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups " "of options configure behavior of apt periodic updates, which is done by " @@ -6913,12 +6929,12 @@ msgstr "" "script <literal>/etc/cron.daily/apt</literal>, lancé quotidiennement." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:599 +#: apt.conf.5.xml:604 msgid "Debug options" msgstr "Les options de débogage" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:601 +#: apt.conf.5.xml:606 msgid "" "Enabling options in the <literal>Debug::</literal> section will cause " "debugging information to be sent to the standard error stream of the program " @@ -6936,7 +6952,7 @@ msgstr "" "peuvent tout de même être utiles :" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:612 +#: apt.conf.5.xml:617 msgid "" "<literal>Debug::pkgProblemResolver</literal> enables output about the " "decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</" @@ -6947,7 +6963,7 @@ msgstr "" "upgrade, upgrade, install, remove et purge</literal>." #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:620 +#: apt.conf.5.xml:625 msgid "" "<literal>Debug::NoLocking</literal> disables all file locking. This can be " "used to run some operations (for instance, <literal>apt-get -s install</" @@ -6959,7 +6975,7 @@ msgstr "" "superutilisateur." #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:629 +#: apt.conf.5.xml:634 msgid "" "<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each " "time that <literal>apt</literal> invokes &dpkg;." @@ -6971,7 +6987,7 @@ msgstr "" #. motivating example, except I haven't a clue why you'd want #. to do this. #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:637 +#: apt.conf.5.xml:642 msgid "" "<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data " "in CDROM IDs." @@ -6980,17 +6996,17 @@ msgstr "" "type statfs dans les identifiants de CD." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:647 +#: apt.conf.5.xml:652 msgid "A full list of debugging options to apt follows." msgstr "Liste complète des options de débogage de APT :" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:652 +#: apt.conf.5.xml:657 msgid "<literal>Debug::Acquire::cdrom</literal>" msgstr "<literal>Debug::Acquire::cdrom</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:656 +#: apt.conf.5.xml:661 msgid "" "Print information related to accessing <literal>cdrom://</literal> sources." msgstr "" @@ -6998,44 +7014,44 @@ msgstr "" "literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:663 +#: apt.conf.5.xml:668 msgid "<literal>Debug::Acquire::ftp</literal>" msgstr "<literal>Debug::Acquire::ftp</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:667 +#: apt.conf.5.xml:672 msgid "Print information related to downloading packages using FTP." msgstr "" "Affiche les informations concernant le téléchargement de paquets par FTP." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:674 +#: apt.conf.5.xml:679 msgid "<literal>Debug::Acquire::http</literal>" msgstr "<literal>Debug::Acquire::http</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:678 +#: apt.conf.5.xml:683 msgid "Print information related to downloading packages using HTTP." msgstr "" "Affiche les informations concernant le téléchargement de paquets par HTTP." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:685 +#: apt.conf.5.xml:690 msgid "<literal>Debug::Acquire::https</literal>" msgstr "<literal>Debug::Acquire::https</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:689 +#: apt.conf.5.xml:694 msgid "Print information related to downloading packages using HTTPS." msgstr "Print information related to downloading packages using HTTPS." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:696 +#: apt.conf.5.xml:701 msgid "<literal>Debug::Acquire::gpgv</literal>" msgstr "<literal>Debug::Acquire::gpgv</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:700 +#: apt.conf.5.xml:705 msgid "" "Print information related to verifying cryptographic signatures using " "<literal>gpg</literal>." @@ -7044,12 +7060,12 @@ msgstr "" "cryptographiques avec <literal>gpg</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:707 +#: apt.conf.5.xml:712 msgid "<literal>Debug::aptcdrom</literal>" msgstr "<literal>Debug::aptcdrom</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:711 +#: apt.conf.5.xml:716 msgid "" "Output information about the process of accessing collections of packages " "stored on CD-ROMs." @@ -7058,24 +7074,24 @@ msgstr "" "stockées sur CD." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:718 +#: apt.conf.5.xml:723 msgid "<literal>Debug::BuildDeps</literal>" msgstr "<literal>Debug::BuildDeps</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:721 +#: apt.conf.5.xml:726 msgid "Describes the process of resolving build-dependencies in &apt-get;." msgstr "" "Décrit le processus de résolution des dépendances pour la construction de " "paquets source ( « build-dependencies » ) par &apt-get;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:728 +#: apt.conf.5.xml:733 msgid "<literal>Debug::Hashes</literal>" msgstr "<literal>Debug::Hashes</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:731 +#: apt.conf.5.xml:736 msgid "" "Output each cryptographic hash that is generated by the <literal>apt</" "literal> libraries." @@ -7084,12 +7100,12 @@ msgstr "" "librairies d'<literal>apt</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:738 +#: apt.conf.5.xml:743 msgid "<literal>Debug::IdentCDROM</literal>" msgstr "<literal>Debug::IdentCDROM</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:741 +#: apt.conf.5.xml:746 msgid "" "Do not include information from <literal>statfs</literal>, namely the number " "of used and free blocks on the CD-ROM filesystem, when generating an ID for " @@ -7100,12 +7116,12 @@ msgstr "" "utilisés sur le système de fichier du CD." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:749 +#: apt.conf.5.xml:754 msgid "<literal>Debug::NoLocking</literal>" msgstr "<literal>Debug::NoLocking</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:752 +#: apt.conf.5.xml:757 msgid "" "Disable all file locking. For instance, this will allow two instances of " "<quote><literal>apt-get update</literal></quote> to run at the same time." @@ -7115,24 +7131,24 @@ msgstr "" "temps." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:760 +#: apt.conf.5.xml:765 msgid "<literal>Debug::pkgAcquire</literal>" msgstr "<literal>Debug::pkgAcquire</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:764 +#: apt.conf.5.xml:769 msgid "Log when items are added to or removed from the global download queue." msgstr "" "Trace les ajouts et suppressions d'éléments de la queue globale de " "téléchargement." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:771 +#: apt.conf.5.xml:776 msgid "<literal>Debug::pkgAcquire::Auth</literal>" msgstr "<literal>Debug::pkgAcquire::Auth</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:774 +#: apt.conf.5.xml:779 msgid "" "Output status messages and errors related to verifying checksums and " "cryptographic signatures of downloaded files." @@ -7142,12 +7158,12 @@ msgstr "" "éventuelles." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:781 +#: apt.conf.5.xml:786 msgid "<literal>Debug::pkgAcquire::Diffs</literal>" msgstr "<literal>Debug::pkgAcquire::Diffs</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:784 +#: apt.conf.5.xml:789 msgid "" "Output information about downloading and applying package index list diffs, " "and errors relating to package index list diffs." @@ -7157,12 +7173,12 @@ msgstr "" "éventuelles." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:792 +#: apt.conf.5.xml:797 msgid "<literal>Debug::pkgAcquire::RRed</literal>" msgstr "<literal>Debug::pkgAcquire::RRed</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:796 +#: apt.conf.5.xml:801 msgid "" "Output information related to patching apt package lists when downloading " "index diffs instead of full indices." @@ -7172,12 +7188,12 @@ msgstr "" "place des fichiers complets." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:803 +#: apt.conf.5.xml:808 msgid "<literal>Debug::pkgAcquire::Worker</literal>" msgstr "<literal>Debug::pkgAcquire::Worker</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:807 +#: apt.conf.5.xml:812 msgid "" "Log all interactions with the sub-processes that actually perform downloads." msgstr "" @@ -7185,12 +7201,12 @@ msgstr "" "effectivement des téléchargements." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:814 +#: apt.conf.5.xml:819 msgid "<literal>Debug::pkgAutoRemove</literal>" msgstr "<literal>Debug::pkgAutoRemove</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:818 +#: apt.conf.5.xml:823 msgid "" "Log events related to the automatically-installed status of packages and to " "the removal of unused packages." @@ -7199,12 +7215,12 @@ msgstr "" "automatiquement, et la suppression des paquets inutiles." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:825 +#: apt.conf.5.xml:830 msgid "<literal>Debug::pkgDepCache::AutoInstall</literal>" msgstr "<literal>Debug::pkgDepCache::AutoInstall</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:828 +#: apt.conf.5.xml:833 msgid "" "Generate debug messages describing which packages are being automatically " "installed to resolve dependencies. This corresponds to the initial auto-" @@ -7219,12 +7235,12 @@ msgstr "" "de APT ; voir <literal>Debug::pkgProblemResolver</literal> pour ce dernier." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:839 +#: apt.conf.5.xml:844 msgid "<literal>Debug::pkgDepCache::Marker</literal>" msgstr "<literal>Debug::pkgDepCache::Marker</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:842 +#: apt.conf.5.xml:847 msgid "" "Generate debug messages describing which package is marked as keep/install/" "remove while the ProblemResolver does his work. Each addition or deletion " @@ -7259,24 +7275,24 @@ msgstr "" "de APT ; voir <literal>Debug::pkgProblemResolver</literal> pour ce dernier." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:861 +#: apt.conf.5.xml:866 msgid "<literal>Debug::pkgInitConfig</literal>" msgstr "<literal>Debug::pkgInitConfig</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:864 +#: apt.conf.5.xml:869 msgid "Dump the default configuration to standard error on startup." msgstr "" "Affiche, au lancement, l'ensemble de la configuration sur la sortie d'erreur " "standard." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:871 +#: apt.conf.5.xml:876 msgid "<literal>Debug::pkgDPkgPM</literal>" msgstr "<literal>Debug::pkgDPkgPM</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:874 +#: apt.conf.5.xml:879 msgid "" "When invoking &dpkg;, output the precise command line with which it is being " "invoked, with arguments separated by a single space character." @@ -7285,12 +7301,12 @@ msgstr "" "paramètres sont séparés par des espaces." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:882 +#: apt.conf.5.xml:887 msgid "<literal>Debug::pkgDPkgProgressReporting</literal>" msgstr "<literal>Debug::pkgDPkgProgressReporting</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:885 +#: apt.conf.5.xml:890 msgid "" "Output all the data received from &dpkg; on the status file descriptor and " "any errors encountered while parsing it." @@ -7300,12 +7316,12 @@ msgstr "" "fichier." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:892 +#: apt.conf.5.xml:897 msgid "<literal>Debug::pkgOrderList</literal>" msgstr "<literal>Debug::pkgOrderList</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:896 +#: apt.conf.5.xml:901 msgid "" "Generate a trace of the algorithm that decides the order in which " "<literal>apt</literal> should pass packages to &dpkg;." @@ -7314,33 +7330,33 @@ msgstr "" "<literal>apt</literal> passe les paquets à &dpkg;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:904 +#: apt.conf.5.xml:909 msgid "<literal>Debug::pkgPackageManager</literal>" msgstr "<literal>Debug::pkgPackageManager</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:908 +#: apt.conf.5.xml:913 msgid "" "Output status messages tracing the steps performed when invoking &dpkg;." msgstr "Affiche le détail des opérations liées à l'invocation de &dpkg;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:915 +#: apt.conf.5.xml:920 msgid "<literal>Debug::pkgPolicy</literal>" msgstr "<literal>Debug::pkgPolicy</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:919 +#: apt.conf.5.xml:924 msgid "Output the priority of each package list on startup." msgstr "Affiche, au lancement, la priorité de chaque liste de paquets." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:925 +#: apt.conf.5.xml:930 msgid "<literal>Debug::pkgProblemResolver</literal>" msgstr "<literal>Debug::pkgProblemResolver</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:929 +#: apt.conf.5.xml:934 msgid "" "Trace the execution of the dependency resolver (this applies only to what " "happens when a complex dependency problem is encountered)." @@ -7349,12 +7365,12 @@ msgstr "" "concerne que les cas où un problème de dépendances complexe se présente)." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:937 +#: apt.conf.5.xml:942 msgid "<literal>Debug::pkgProblemResolver::ShowScores</literal>" msgstr "<literal>Debug::pkgProblemResolver::ShowScores</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:940 +#: apt.conf.5.xml:945 msgid "" "Display a list of all installed packages with their calculated score used by " "the pkgProblemResolver. The description of the package is the same as " @@ -7365,12 +7381,12 @@ msgstr "" "est décrite dans <literal>Debug::pkgDepCache::Marker</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:948 +#: apt.conf.5.xml:953 msgid "<literal>Debug::sourceList</literal>" msgstr "<literal>Debug::sourceList</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:952 +#: apt.conf.5.xml:957 msgid "" "Print information about the vendors read from <filename>/etc/apt/vendors." "list</filename>." @@ -7379,7 +7395,7 @@ msgstr "" "list</filename>." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:974 +#: apt.conf.5.xml:979 msgid "" "&configureindex; is a configuration file showing example values for all " "possible options." @@ -7388,7 +7404,7 @@ msgstr "" "exemples pour toutes les options existantes." #. type: Content of: <refentry><refsect1><variablelist> -#: apt.conf.5.xml:981 +#: apt.conf.5.xml:986 #, fuzzy #| msgid "&apt-conf;" msgid "&file-aptconf;" @@ -7396,7 +7412,7 @@ msgstr "&apt-conf;" #. ? reading apt.conf #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:986 +#: apt.conf.5.xml:991 msgid "&apt-cache;, &apt-config;, &apt-preferences;." msgstr "&apt-cache;, &apt-config;, &apt-preferences;." @@ -8926,6 +8942,24 @@ msgstr "" "l'accès aux fichiers de la machine distante et le transfert, on utilise les " "commandes standard <command>find</command> et <command>dd</command>." +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: sources.list.5.xml:178 +msgid "more recongnizable URI types" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:180 +msgid "" +"APT can be extended with more methods shipped in other optional packages " +"which should follow the nameing scheme <literal>apt-transport-" +"<replaceable>method</replaceable></literal>. The APT team e.g. maintain " +"also the <literal>apt-transport-https</literal> package which provides " +"access methods for https-URIs with features similiar to the http method, but " +"other methods for using e.g. debtorrent are also available, see " +"<citerefentry> <refentrytitle><filename>apt-transport-debtorrent</filename></" +"refentrytitle> <manvolnum>1</manvolnum></citerefentry>." +msgstr "" + #. type: Content of: <refentry><refsect1><para> #: sources.list.5.xml:122 msgid "" @@ -8936,7 +8970,7 @@ msgstr "" "ssh et rsh. <placeholder type=\"variablelist\" id=\"0\"/>" #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:182 +#: sources.list.5.xml:194 msgid "" "Uses the archive stored locally (or NFS mounted) at /home/jason/debian for " "stable/main, stable/contrib, and stable/non-free." @@ -8945,37 +8979,37 @@ msgstr "" "debian pour stable/main, stable/contrib et stable/non-free." #. type: Content of: <refentry><refsect1><literallayout> -#: sources.list.5.xml:184 +#: sources.list.5.xml:196 #, no-wrap msgid "deb file:/home/jason/debian stable main contrib non-free" msgstr "deb file:/home/jason/debian stable main contrib non-free" #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:186 +#: sources.list.5.xml:198 msgid "As above, except this uses the unstable (development) distribution." msgstr "" "Comme ci-dessus, excepté que cette ligne utilise la distribution " "« unstable » (développement)." #. type: Content of: <refentry><refsect1><literallayout> -#: sources.list.5.xml:187 +#: sources.list.5.xml:199 #, no-wrap msgid "deb file:/home/jason/debian unstable main contrib non-free" msgstr "deb file:/home/jason/debian unstable main contrib non-free" #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:189 +#: sources.list.5.xml:201 msgid "Source line for the above" msgstr "La précédente ligne, mais pour les sources." #. type: Content of: <refentry><refsect1><literallayout> -#: sources.list.5.xml:190 +#: sources.list.5.xml:202 #, no-wrap msgid "deb-src file:/home/jason/debian unstable main contrib non-free" msgstr "deb-src file:/home/jason/debian unstable main contrib non-free" #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:192 +#: sources.list.5.xml:204 msgid "" "Uses HTTP to access the archive at archive.debian.org, and uses only the " "hamm/main area." @@ -8984,13 +9018,13 @@ msgstr "" "n'utiliser que la section hamm/main." #. type: Content of: <refentry><refsect1><literallayout> -#: sources.list.5.xml:194 +#: sources.list.5.xml:206 #, no-wrap msgid "deb http://archive.debian.org/debian-archive hamm main" msgstr "deb http://archive.debian.org/debian-archive hamm main" #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:196 +#: sources.list.5.xml:208 msgid "" "Uses FTP to access the archive at ftp.debian.org, under the debian " "directory, and uses only the stable/contrib area." @@ -8999,13 +9033,13 @@ msgstr "" "répertoire debian, et n'utiliser que la section stable/contrib." #. type: Content of: <refentry><refsect1><literallayout> -#: sources.list.5.xml:198 +#: sources.list.5.xml:210 #, no-wrap msgid "deb ftp://ftp.debian.org/debian stable contrib" msgstr "deb ftp://ftp.debian.org/debian stable contrib" #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:200 +#: sources.list.5.xml:212 msgid "" "Uses FTP to access the archive at ftp.debian.org, under the debian " "directory, and uses only the unstable/contrib area. If this line appears as " @@ -9018,13 +9052,13 @@ msgstr "" "apparaissent, une seule session FTP sera utilisée pour les deux lignes." #. type: Content of: <refentry><refsect1><literallayout> -#: sources.list.5.xml:204 +#: sources.list.5.xml:216 #, no-wrap msgid "deb ftp://ftp.debian.org/debian unstable contrib" msgstr "deb ftp://ftp.debian.org/debian unstable contrib" #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:206 +#: sources.list.5.xml:218 msgid "" "Uses HTTP to access the archive at nonus.debian.org, under the debian-non-US " "directory." @@ -9033,19 +9067,19 @@ msgstr "" "répertoire debian-non-US." #. type: Content of: <refentry><refsect1><literallayout> -#: sources.list.5.xml:208 +#: sources.list.5.xml:220 #, no-wrap msgid "deb http://nonus.debian.org/debian-non-US stable/non-US main contrib non-free" msgstr "deb http://nonus.debian.org/debian-non-US stable/non-US main contrib non-free" #. type: Content of: <refentry><refsect1><para><literallayout> -#: sources.list.5.xml:217 +#: sources.list.5.xml:229 #, no-wrap msgid "deb http://ftp.de.debian.org/debian-non-US unstable/binary-$(ARCH)/" msgstr "deb http://ftp.de.debian.org/debian-non-US unstable/binary-$(ARCH)/" #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:210 +#: sources.list.5.xml:222 msgid "" "Uses HTTP to access the archive at nonus.debian.org, under the debian-non-US " "directory, and uses only files found under <filename>unstable/binary-i386</" @@ -9064,7 +9098,7 @@ msgstr "" "\"/>" #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:222 +#: sources.list.5.xml:234 msgid "&apt-cache; &apt-conf;" msgstr "&apt-cache; &apt-conf;" diff --git a/doc/po/ja.po b/doc/po/ja.po index f417fefcc..c4e004415 100644 --- a/doc/po/ja.po +++ b/doc/po/ja.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2009-10-01 20:13+0300\n" +"POT-Creation-Date: 2009-10-14 07:44+0300\n" "PO-Revision-Date: 2009-07-30 22:55+0900\n" "Last-Translator: KURASAWA Nozomu <nabetaro@caldron.jp>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -1693,7 +1693,7 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt-cache.8.xml:281 apt-config.8.xml:93 apt-extracttemplates.1.xml:56 #: apt-ftparchive.1.xml:492 apt-get.8.xml:319 apt-mark.8.xml:89 -#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:447 apt.conf.5.xml:469 +#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:452 apt.conf.5.xml:474 msgid "options" msgstr "オプション" @@ -1943,7 +1943,7 @@ msgstr "&apt-commonoptions;" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> #: apt-cache.8.xml:361 apt-get.8.xml:559 apt-key.8.xml:138 apt-mark.8.xml:122 -#: apt.conf.5.xml:979 apt_preferences.5.xml:615 +#: apt.conf.5.xml:984 apt_preferences.5.xml:615 msgid "Files" msgstr "ファイル" @@ -1957,8 +1957,8 @@ msgstr "" #: apt-cache.8.xml:368 apt-cdrom.8.xml:155 apt-config.8.xml:103 #: apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:563 apt-get.8.xml:569 #: apt-key.8.xml:162 apt-mark.8.xml:133 apt-secure.8.xml:181 -#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:985 apt_preferences.5.xml:622 -#: sources.list.5.xml:221 +#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:990 apt_preferences.5.xml:622 +#: sources.list.5.xml:233 msgid "See Also" msgstr "関連項目" @@ -3665,8 +3665,8 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt-ftparchive.1.xml:552 apt.conf.5.xml:973 apt_preferences.5.xml:462 -#: sources.list.5.xml:181 +#: apt-ftparchive.1.xml:552 apt.conf.5.xml:978 apt_preferences.5.xml:462 +#: sources.list.5.xml:193 msgid "Examples" msgstr "サンプル" @@ -5810,14 +5810,27 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:56 +#, fuzzy +#| msgid "" +#| "Syntactically the configuration language is modeled after what the ISC " +#| "tools such as bind and dhcp use. Lines starting with <literal>//</" +#| "literal> are treated as comments (ignored), as well as all text between " +#| "<literal>/*</literal> and <literal>*/</literal>, just like C/C++ " +#| "comments. Each line is of the form <literal>APT::Get::Assume-Yes \"true" +#| "\";</literal> The trailing semicolon is required and the quotes are " +#| "optional. A new scope can be opened with curly braces, like:" msgid "" "Syntactically the configuration language is modeled after what the ISC tools " "such as bind and dhcp use. Lines starting with <literal>//</literal> are " "treated as comments (ignored), as well as all text between <literal>/*</" "literal> and <literal>*/</literal>, just like C/C++ comments. Each line is " "of the form <literal>APT::Get::Assume-Yes \"true\";</literal> The trailing " -"semicolon is required and the quotes are optional. A new scope can be opened " -"with curly braces, like:" +"semicolon and the quotes are required. The value must be on one line, and " +"there is no kind of string concatenation. It must not include inside " +"quotes. The behavior of the backslash \"\\\" and escaped characters inside " +"a value is undefined and it should not be used. An option name may include " +"alphanumerical characters and the \"/-:._+\" characters. A new scope can be " +"opened with curly braces, like:" msgstr "" "設定言語ã®æ–‡æ³•ã¯ã€bind ã‚„ dhcp ã®ã‚ˆã†ãª ISC ツールをモデルã«ã—ã¦ã„ã¾ã™ã€‚" "<literal>//</literal> ã§å§‹ã¾ã‚‹è¡Œã¯ã‚³ãƒ¡ãƒ³ãƒˆã¨ã—ã¦æ‰±ã‚ã‚Œã¾ã™ (無視)。åŒæ§˜ã« C/C" @@ -5829,7 +5842,7 @@ msgstr "" # type: Content of: <refentry><refsect1><informalexample><programlisting> #. type: Content of: <refentry><refsect1><informalexample><programlisting> -#: apt.conf.5.xml:66 +#: apt.conf.5.xml:70 #, no-wrap msgid "" "APT {\n" @@ -5848,7 +5861,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:74 +#: apt.conf.5.xml:78 msgid "" "with newlines placed to make it more readable. Lists can be created by " "opening a scope and including a single string enclosed in quotes followed by " @@ -5860,14 +5873,14 @@ msgstr "" # type: Content of: <refentry><refsect1><informalexample><programlisting> #. type: Content of: <refentry><refsect1><informalexample><programlisting> -#: apt.conf.5.xml:79 +#: apt.conf.5.xml:83 #, no-wrap msgid "DPkg::Pre-Install-Pkgs {\"/usr/sbin/dpkg-preconfigure --apt\";};\n" msgstr "DPkg::Pre-Install-Pkgs {\"/usr/sbin/dpkg-preconfigure --apt\";};\n" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:82 +#: apt.conf.5.xml:86 msgid "" "In general the sample configuration file in <filename>&docdir;examples/apt." "conf</filename> &configureindex; is a good guide for how it should look." @@ -5876,7 +5889,7 @@ msgstr "" "定ファイルã®ã‚µãƒ³ãƒ—ルã§ã™ã€‚ã©ã®ã‚ˆã†ã«è¨­å®šã™ã‚‹ã‹å‚考ã«ãªã‚‹ã§ã—ょã†ã€‚" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:86 +#: apt.conf.5.xml:90 msgid "" "The names of the configuration items are not case-sensitive. So in the " "previous example you could use <literal>dpkg::pre-install-pkgs</literal>." @@ -5885,7 +5898,7 @@ msgstr "" "<literal>dpkg::pre-install-pkgs</literal> ã¨ã§ãã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:89 +#: apt.conf.5.xml:93 msgid "" "Names for the configuration items are optional if a list is defined as it " "can be see in the <literal>DPkg::Pre-Install-Pkgs</literal> example above. " @@ -5896,7 +5909,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:94 +#: apt.conf.5.xml:98 #, fuzzy #| msgid "" #| "Two specials are allowed, <literal>#include</literal> and " @@ -5906,7 +5919,8 @@ msgstr "" #| "configuration tree. The specified element and all its descendents are " #| "erased." msgid "" -"Two specials are allowed, <literal>#include</literal> and <literal>#clear</" +"Two specials are allowed, <literal>#include</literal> (which is deprecated " +"and not supported by alternative implementations) and <literal>#clear</" "literal>: <literal>#include</literal> will include the given file, unless " "the filename ends in a slash, then the whole directory is included. " "<literal>#clear</literal> is used to erase a part of the configuration tree. " @@ -5920,7 +5934,7 @@ msgstr "" "指定ã—ãŸè¦ç´ ã¨ã€ãれ以下ã®è¦ç´ ã‚’削除ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:101 +#: apt.conf.5.xml:106 msgid "" "The #clear command is the only way to delete a list or a complete scope. " "Reopening a scope or the ::-style described below will <emphasis>not</" @@ -5931,7 +5945,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:106 +#: apt.conf.5.xml:111 #, fuzzy #| msgid "" #| "All of the APT tools take a -o option which allows an arbitrary " @@ -5953,7 +5967,7 @@ msgstr "" "ã‚‹ã“ã¨ã§ã€ãƒªã‚¹ãƒˆã‚’追加ã™ã‚‹ã“ã¨ãŒã§ãã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:113 +#: apt.conf.5.xml:118 msgid "" "Note that you can use :: only for appending one item per line to a list and " "that you should not use it in combination with the scope syntax. (The scope " @@ -5971,13 +5985,13 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:125 +#: apt.conf.5.xml:130 msgid "The APT Group" msgstr "APT グループ" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:126 +#: apt.conf.5.xml:131 msgid "" "This group of options controls general APT behavior as well as holding the " "options for all of the tools." @@ -5987,13 +6001,13 @@ msgstr "" # type: <tag></tag> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:130 +#: apt.conf.5.xml:135 msgid "Architecture" msgstr "Architecture" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:131 +#: apt.conf.5.xml:136 msgid "" "System Architecture; sets the architecture to use when fetching files and " "parsing package lists. The internal default is the architecture apt was " @@ -6005,12 +6019,12 @@ msgstr "" # type: Content of: <refentry><refsect1><refsect2><para><programlisting> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:136 +#: apt.conf.5.xml:141 msgid "Default-Release" msgstr "Default-Release" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:137 +#: apt.conf.5.xml:142 msgid "" "Default release to install packages from if more than one version available. " "Contains release name, codename or release version. Examples: 'stable', " @@ -6023,13 +6037,13 @@ msgstr "" "ã™ã€‚ &apt-preferences; ã‚‚å‚ç…§ã—ã¦ãã ã•ã„。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:141 +#: apt.conf.5.xml:146 msgid "Ignore-Hold" msgstr "Ignore-Hold" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:142 +#: apt.conf.5.xml:147 msgid "" "Ignore Held packages; This global option causes the problem resolver to " "ignore held packages in its decision making." @@ -6039,13 +6053,13 @@ msgstr "" # type: <tag></tag> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:146 +#: apt.conf.5.xml:151 msgid "Clean-Installed" msgstr "Clean-Installed" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:147 +#: apt.conf.5.xml:152 msgid "" "Defaults to on. When turned on the autoclean feature will remove any " "packages which can no longer be downloaded from the cache. If turned off " @@ -6060,12 +6074,12 @@ msgstr "" # type: Content of: <refentry><refnamediv><refname> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:153 +#: apt.conf.5.xml:158 msgid "Immediate-Configure" msgstr "Immediate-Configure" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:154 +#: apt.conf.5.xml:159 msgid "" "Defaults to on which will cause APT to install essential and important " "packages as fast as possible in the install/upgrade operation. This is done " @@ -6092,13 +6106,13 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:172 +#: apt.conf.5.xml:177 msgid "Force-LoopBreak" msgstr "Force-LoopBreak" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:173 +#: apt.conf.5.xml:178 msgid "" "Never Enable this option unless you -really- know what you are doing. It " "permits APT to temporarily remove an essential package to break a Conflicts/" @@ -6116,13 +6130,13 @@ msgstr "" "ä¸å¯æ¬ ãƒ‘ッケージã§å‹•ä½œã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:181 +#: apt.conf.5.xml:186 msgid "Cache-Limit" msgstr "Cache-Limit" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:182 +#: apt.conf.5.xml:187 msgid "" "APT uses a fixed size memory mapped cache file to store the 'available' " "information. This sets the size of that cache (in bytes)." @@ -6131,24 +6145,24 @@ msgstr "" "ファイルを使用ã—ã¾ã™ã€‚ã“ã®ã‚ªãƒ—ションã¯ã€ãã®ã‚­ãƒ£ãƒƒã‚·ãƒ¥ã‚µã‚¤ã‚ºã‚’指定ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:186 +#: apt.conf.5.xml:191 msgid "Build-Essential" msgstr "Build-Essential" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:187 +#: apt.conf.5.xml:192 msgid "Defines which package(s) are considered essential build dependencies." msgstr "構築ä¾å­˜é–¢ä¿‚ã§ä¸å¯æ¬ ãªãƒ‘ッケージを定義ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:190 +#: apt.conf.5.xml:195 msgid "Get" msgstr "Get" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:191 +#: apt.conf.5.xml:196 msgid "" "The Get subsection controls the &apt-get; tool, please see its documentation " "for more information about the options here." @@ -6157,13 +6171,13 @@ msgstr "" "&apt-get; ã®æ–‡æ›¸ã‚’å‚ç…§ã—ã¦ãã ã•ã„。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:195 +#: apt.conf.5.xml:200 msgid "Cache" msgstr "Cache" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:196 +#: apt.conf.5.xml:201 msgid "" "The Cache subsection controls the &apt-cache; tool, please see its " "documentation for more information about the options here." @@ -6172,13 +6186,13 @@ msgstr "" "㯠&apt-cache; ã®æ–‡æ›¸ã‚’å‚ç…§ã—ã¦ãã ã•ã„。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:200 +#: apt.conf.5.xml:205 msgid "CDROM" msgstr "CDROM" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:201 +#: apt.conf.5.xml:206 msgid "" "The CDROM subsection controls the &apt-cdrom; tool, please see its " "documentation for more information about the options here." @@ -6188,17 +6202,17 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:207 +#: apt.conf.5.xml:212 msgid "The Acquire Group" msgstr "Acquire グループ" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:212 +#: apt.conf.5.xml:217 msgid "PDiffs" msgstr "PDiffs" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:213 +#: apt.conf.5.xml:218 msgid "" "Try to download deltas called <literal>PDiffs</literal> for Packages or " "Sources files instead of downloading whole ones. True by default." @@ -6208,13 +6222,13 @@ msgstr "" "ルトã§ã¯ True ã§ã™ã€‚" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:218 +#: apt.conf.5.xml:223 msgid "Queue-Mode" msgstr "Queue-Mode" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:219 +#: apt.conf.5.xml:224 msgid "" "Queuing mode; <literal>Queue-Mode</literal> can be one of <literal>host</" "literal> or <literal>access</literal> which determines how APT parallelizes " @@ -6229,13 +6243,13 @@ msgstr "" # type: Content of: <refentry><refsect1><refsect2><title> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:226 +#: apt.conf.5.xml:231 msgid "Retries" msgstr "Retries" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:227 +#: apt.conf.5.xml:232 msgid "" "Number of retries to perform. If this is non-zero APT will retry failed " "files the given number of times." @@ -6244,13 +6258,13 @@ msgstr "" "ãˆã‚‰ã‚ŒãŸå›žæ•°ã ã‘リトライを行ã„ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:231 +#: apt.conf.5.xml:236 msgid "Source-Symlinks" msgstr "Source-Symlinks" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:232 +#: apt.conf.5.xml:237 msgid "" "Use symlinks for source archives. If set to true then source archives will " "be symlinked when possible instead of copying. True is the default." @@ -6261,13 +6275,13 @@ msgstr "" # type: <tag></tag> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:236 sources.list.5.xml:139 +#: apt.conf.5.xml:241 sources.list.5.xml:139 msgid "http" msgstr "http" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:237 +#: apt.conf.5.xml:242 #, fuzzy #| msgid "" #| "HTTP URIs; http::Proxy is the default http proxy to use. It is in the " @@ -6293,7 +6307,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:245 +#: apt.conf.5.xml:250 msgid "" "Three settings are provided for cache control with HTTP/1.1 compliant proxy " "caches. <literal>No-Cache</literal> tells the proxy to not use its cached " @@ -6318,7 +6332,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:255 apt.conf.5.xml:312 +#: apt.conf.5.xml:260 apt.conf.5.xml:317 msgid "" "The option <literal>timeout</literal> sets the timeout timer used by the " "method, this applies to all things including connection timeout and data " @@ -6330,7 +6344,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:258 +#: apt.conf.5.xml:263 msgid "" "One setting is provided to control the pipeline depth in cases where the " "remote server is not RFC conforming or buggy (such as Squid 2.0.2) " @@ -6349,7 +6363,7 @@ msgstr "" "ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:266 +#: apt.conf.5.xml:271 msgid "" "The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</" "literal> which accepts integer values in kilobyte. The default value is 0 " @@ -6360,12 +6374,12 @@ msgstr "" # type: <tag></tag> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:272 +#: apt.conf.5.xml:277 msgid "https" msgstr "https" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:273 +#: apt.conf.5.xml:278 msgid "" "HTTPS URIs. Cache-control and proxy options are the same as for " "<literal>http</literal> method. <literal>Pipeline-Depth</literal> option is " @@ -6376,7 +6390,7 @@ msgstr "" "ã—ã¦ã„ã¾ã›ã‚“。" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:277 +#: apt.conf.5.xml:282 msgid "" "<literal>CaInfo</literal> suboption specifies place of file that holds info " "about trusted certificates. <literal><host>::CaInfo</literal> is " @@ -6398,13 +6412,13 @@ msgstr "" # type: <tag></tag> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:295 sources.list.5.xml:150 +#: apt.conf.5.xml:300 sources.list.5.xml:150 msgid "ftp" msgstr "ftp" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:296 +#: apt.conf.5.xml:301 #, fuzzy #| msgid "" #| "FTP URIs; ftp::Proxy is the default proxy server to use. It is in the " @@ -6447,7 +6461,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:315 +#: apt.conf.5.xml:320 msgid "" "Several settings are provided to control passive mode. Generally it is safe " "to leave passive mode on, it works in nearly every environment. However " @@ -6463,7 +6477,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:322 +#: apt.conf.5.xml:327 msgid "" "It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</" "envar> environment variable to a http url - see the discussion of the http " @@ -6477,7 +6491,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:327 +#: apt.conf.5.xml:332 msgid "" "The setting <literal>ForceExtended</literal> controls the use of RFC2428 " "<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is " @@ -6494,19 +6508,20 @@ msgstr "" # type: Content of: <refentry><refnamediv><refname> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:334 sources.list.5.xml:132 +#: apt.conf.5.xml:339 sources.list.5.xml:132 msgid "cdrom" msgstr "cdrom" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:340 -#, no-wrap -msgid "\"/cdrom/\"::Mount \"foo\";" +#: apt.conf.5.xml:345 +#, fuzzy, no-wrap +#| msgid "\"/cdrom/\"::Mount \"foo\";" +msgid "/cdrom/::Mount \"foo\";" msgstr "\"/cdrom/\"::Mount \"foo\";" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:335 +#: apt.conf.5.xml:340 msgid "" "CDROM URIs; the only setting for CDROM URIs is the mount point, " "<literal>cdrom::Mount</literal> which must be the mount point for the CDROM " @@ -6527,13 +6542,13 @@ msgstr "" "ã™ã€‚" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:345 +#: apt.conf.5.xml:350 msgid "gpgv" msgstr "gpgv" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:346 +#: apt.conf.5.xml:351 msgid "" "GPGV URIs; the only option for GPGV URIs is the option to pass additional " "parameters to gpgv. <literal>gpgv::Options</literal> Additional options " @@ -6544,18 +6559,18 @@ msgstr "" "ã™ã€‚" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:351 +#: apt.conf.5.xml:356 msgid "CompressionTypes" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:357 +#: apt.conf.5.xml:362 #, no-wrap msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:352 +#: apt.conf.5.xml:357 msgid "" "List of compression types which are understood by the acquire methods. " "Files like <filename>Packages</filename> can be available in various " @@ -6567,19 +6582,19 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:362 +#: apt.conf.5.xml:367 #, no-wrap msgid "Acquire::CompressionTypes::Order:: \"gz\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:365 +#: apt.conf.5.xml:370 #, no-wrap msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:358 +#: apt.conf.5.xml:363 msgid "" "Also the <literal>Order</literal> subgroup can be used to define in which " "order the acquire system will try to download the compressed files. The " @@ -6596,13 +6611,13 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:369 +#: apt.conf.5.xml:374 #, no-wrap msgid "Dir::Bin::bzip2 \"/bin/bzip2\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:367 +#: apt.conf.5.xml:372 msgid "" "Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</" "replaceable></literal> will be checked: If this setting exists the method " @@ -6617,7 +6632,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:374 +#: apt.conf.5.xml:379 msgid "" "While it is possible to add an empty compression type to the order list, but " "APT in its current version doesn't understand it correctly and will display " @@ -6628,7 +6643,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:208 +#: apt.conf.5.xml:213 msgid "" "The <literal>Acquire</literal> group of options controls the download of " "packages and the URI handlers. <placeholder type=\"variablelist\" id=\"0\"/>" @@ -6639,13 +6654,13 @@ msgstr "" # type: Content of: <refentry><refsect1><refsect2><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:383 +#: apt.conf.5.xml:388 msgid "Directories" msgstr "ディレクトリ" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:385 +#: apt.conf.5.xml:390 msgid "" "The <literal>Dir::State</literal> section has directories that pertain to " "local state information. <literal>lists</literal> is the directory to place " @@ -6665,7 +6680,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:392 +#: apt.conf.5.xml:397 msgid "" "<literal>Dir::Cache</literal> contains locations pertaining to local cache " "information, such as the two package caches <literal>srcpkgcache</literal> " @@ -6687,7 +6702,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:401 +#: apt.conf.5.xml:406 msgid "" "<literal>Dir::Etc</literal> contains the location of configuration files, " "<literal>sourcelist</literal> gives the location of the sourcelist and " @@ -6702,7 +6717,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:407 +#: apt.conf.5.xml:412 msgid "" "The <literal>Dir::Parts</literal> setting reads in all the config fragments " "in lexical order from the directory specified. After this is done then the " @@ -6714,7 +6729,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:411 +#: apt.conf.5.xml:416 #, fuzzy #| msgid "" #| "Binary programs are pointed to by <literal>Dir::Bin</literal>. " @@ -6739,7 +6754,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:419 +#: apt.conf.5.xml:424 msgid "" "The configuration item <literal>RootDir</literal> has a special meaning. If " "set, all paths in <literal>Dir::</literal> will be relative to " @@ -6760,13 +6775,13 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:432 +#: apt.conf.5.xml:437 msgid "APT in DSelect" msgstr "DSelect ã§ã® APT" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:434 +#: apt.conf.5.xml:439 msgid "" "When APT is used as a &dselect; method several configuration directives " "control the default behaviour. These are in the <literal>DSelect</literal> " @@ -6776,13 +6791,13 @@ msgstr "" "設定項目ã§ã€ãƒ‡ãƒ•ã‚©ãƒ«ãƒˆã®å‹•ä½œã‚’制御ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:438 +#: apt.conf.5.xml:443 msgid "Clean" msgstr "Clean" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:439 +#: apt.conf.5.xml:444 msgid "" "Cache Clean mode; this value may be one of always, prompt, auto, pre-auto " "and never. always and prompt will remove all packages from the cache after " @@ -6799,7 +6814,7 @@ msgstr "" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:448 +#: apt.conf.5.xml:453 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the install phase." @@ -6809,13 +6824,13 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:452 +#: apt.conf.5.xml:457 msgid "Updateoptions" msgstr "Updateoptions" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:453 +#: apt.conf.5.xml:458 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the update phase." @@ -6824,13 +6839,13 @@ msgstr "" "ã•ã‚Œã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:457 +#: apt.conf.5.xml:462 msgid "PromptAfterUpdate" msgstr "PromptAfterUpdate" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:458 +#: apt.conf.5.xml:463 msgid "" "If true the [U]pdate operation in &dselect; will always prompt to continue. " "The default is to prompt only on error." @@ -6840,13 +6855,13 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:464 +#: apt.conf.5.xml:469 msgid "How APT calls dpkg" msgstr "APT ㌠dpkg を呼ã¶æ–¹æ³•" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:465 +#: apt.conf.5.xml:470 msgid "" "Several configuration directives control how APT invokes &dpkg;. These are " "in the <literal>DPkg</literal> section." @@ -6856,7 +6871,7 @@ msgstr "" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:470 +#: apt.conf.5.xml:475 msgid "" "This is a list of options to pass to dpkg. The options must be specified " "using the list notation and each list item is passed as a single argument to " @@ -6866,18 +6881,18 @@ msgstr "" "ã‘ã‚Œã°ãªã‚Šã¾ã›ã‚“。ã¾ãŸã€å„リストã¯å˜ä¸€ã®å¼•æ•°ã¨ã—㦠&dpkg; ã«æ¸¡ã•ã‚Œã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:475 +#: apt.conf.5.xml:480 msgid "Pre-Invoke" msgstr "Pre-Invoke" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:475 +#: apt.conf.5.xml:480 msgid "Post-Invoke" msgstr "Post-Invoke" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:476 +#: apt.conf.5.xml:481 msgid "" "This is a list of shell commands to run before/after invoking &dpkg;. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -6891,13 +6906,13 @@ msgstr "" # type: <tag></tag> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:482 +#: apt.conf.5.xml:487 msgid "Pre-Install-Pkgs" msgstr "Pre-Install-Pkgs" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:483 +#: apt.conf.5.xml:488 msgid "" "This is a list of shell commands to run before invoking dpkg. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -6913,7 +6928,7 @@ msgstr "" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:489 +#: apt.conf.5.xml:494 msgid "" "Version 2 of this protocol dumps more information, including the protocol " "version, the APT configuration space and the packages, files and versions " @@ -6929,13 +6944,13 @@ msgstr "" # type: Content of: <refentry><refsect1><refsect2><title> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:496 +#: apt.conf.5.xml:501 msgid "Run-Directory" msgstr "Run-Directory" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:497 +#: apt.conf.5.xml:502 msgid "" "APT chdirs to this directory before invoking dpkg, the default is <filename>/" "</filename>." @@ -6945,13 +6960,13 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:501 +#: apt.conf.5.xml:506 msgid "Build-options" msgstr "Build-options" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:502 +#: apt.conf.5.xml:507 msgid "" "These options are passed to &dpkg-buildpackage; when compiling packages, the " "default is to disable signing and produce all binaries." @@ -6960,12 +6975,12 @@ msgstr "" "ã¾ã™ã€‚デフォルトã§ã¯ç½²åを無効ã«ã—ã€å…¨ãƒã‚¤ãƒŠãƒªã‚’生æˆã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><refsect2><title> -#: apt.conf.5.xml:507 +#: apt.conf.5.xml:512 msgid "dpkg trigger usage (and related options)" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:508 +#: apt.conf.5.xml:513 msgid "" "APT can call dpkg in a way so it can make aggressive use of triggers over " "multiply calls of dpkg. Without further options dpkg will use triggers only " @@ -6980,7 +6995,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para><literallayout> -#: apt.conf.5.xml:523 +#: apt.conf.5.xml:528 #, no-wrap msgid "" "DPkg::NoTriggers \"true\";\n" @@ -6990,7 +7005,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:517 +#: apt.conf.5.xml:522 msgid "" "Note that it is not guaranteed that APT will support these options or that " "these options will not cause (big) trouble in the future. If you have " @@ -7004,12 +7019,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:529 +#: apt.conf.5.xml:534 msgid "DPkg::NoTriggers" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:530 +#: apt.conf.5.xml:535 msgid "" "Add the no triggers flag to all dpkg calls (expect the ConfigurePending " "call). See &dpkg; if you are interested in what this actually means. In " @@ -7022,14 +7037,14 @@ msgstr "" # type: <tag></tag> #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:537 +#: apt.conf.5.xml:542 #, fuzzy #| msgid "Packages::Compress" msgid "PackageManager::Configure" msgstr "Packages::Compress" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:538 +#: apt.conf.5.xml:543 msgid "" "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " "and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default " @@ -7046,13 +7061,13 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:548 +#: apt.conf.5.xml:553 #, fuzzy msgid "DPkg::ConfigurePending" msgstr "ユーザã®è¨­å®š" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:549 +#: apt.conf.5.xml:554 msgid "" "If this option is set apt will call <command>dpkg --configure --pending</" "command> to let dpkg handle all required configurations and triggers. This " @@ -7063,12 +7078,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:555 +#: apt.conf.5.xml:560 msgid "DPkg::TriggersPending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:556 +#: apt.conf.5.xml:561 msgid "" "Useful for <literal>smart</literal> configuration as a package which has " "pending triggers is not considered as <literal>installed</literal> and dpkg " @@ -7078,12 +7093,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:561 +#: apt.conf.5.xml:566 msgid "PackageManager::UnpackAll" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:562 +#: apt.conf.5.xml:567 msgid "" "As the configuration can be deferred to be done at the end by dpkg it can be " "tried to order the unpack series only by critical needs, e.g. by Pre-" @@ -7095,12 +7110,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:569 +#: apt.conf.5.xml:574 msgid "OrderList::Score::Immediate" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:577 +#: apt.conf.5.xml:582 #, no-wrap msgid "" "OrderList::Score {\n" @@ -7112,7 +7127,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:570 +#: apt.conf.5.xml:575 msgid "" "Essential packages (and there dependencies) should be configured immediately " "after unpacking. It will be a good idea to do this quite early in the " @@ -7126,12 +7141,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:590 +#: apt.conf.5.xml:595 msgid "Periodic and Archives options" msgstr "Periodic オプション㨠Archives オプション" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:591 +#: apt.conf.5.xml:596 msgid "" "<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups " "of options configure behavior of apt periodic updates, which is done by " @@ -7145,12 +7160,12 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:599 +#: apt.conf.5.xml:604 msgid "Debug options" msgstr "デãƒãƒƒã‚°ã‚ªãƒ—ション" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:601 +#: apt.conf.5.xml:606 msgid "" "Enabling options in the <literal>Debug::</literal> section will cause " "debugging information to be sent to the standard error stream of the program " @@ -7161,7 +7176,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:612 +#: apt.conf.5.xml:617 msgid "" "<literal>Debug::pkgProblemResolver</literal> enables output about the " "decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</" @@ -7172,7 +7187,7 @@ msgstr "" "ã«ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:620 +#: apt.conf.5.xml:625 msgid "" "<literal>Debug::NoLocking</literal> disables all file locking. This can be " "used to run some operations (for instance, <literal>apt-get -s install</" @@ -7183,7 +7198,7 @@ msgstr "" "literal>) ã‚’è¡Œã†å ´åˆã«ä½¿ç”¨ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:629 +#: apt.conf.5.xml:634 msgid "" "<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each " "time that <literal>apt</literal> invokes &dpkg;." @@ -7193,66 +7208,66 @@ msgstr "" #. motivating example, except I haven't a clue why you'd want #. to do this. #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:637 +#: apt.conf.5.xml:642 msgid "" "<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data " "in CDROM IDs." msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:647 +#: apt.conf.5.xml:652 msgid "A full list of debugging options to apt follows." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:652 +#: apt.conf.5.xml:657 msgid "<literal>Debug::Acquire::cdrom</literal>" msgstr "<literal>Debug::Acquire::cdrom</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:656 +#: apt.conf.5.xml:661 msgid "" "Print information related to accessing <literal>cdrom://</literal> sources." msgstr "" "<literal>cdrom://</literal> ソースã¸ã®ã‚¢ã‚¯ã‚»ã‚¹ã«é–¢ã™ã‚‹æƒ…報を出力ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:663 +#: apt.conf.5.xml:668 msgid "<literal>Debug::Acquire::ftp</literal>" msgstr "<literal>Debug::Acquire::ftp</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:667 +#: apt.conf.5.xml:672 msgid "Print information related to downloading packages using FTP." msgstr "FTP を用ã„ãŸãƒ‘ッケージã®ãƒ€ã‚¦ãƒ³ãƒ­ãƒ¼ãƒ‰ã«é–¢ã™ã‚‹æƒ…報を出力ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:674 +#: apt.conf.5.xml:679 msgid "<literal>Debug::Acquire::http</literal>" msgstr "<literal>Debug::Acquire::http</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:678 +#: apt.conf.5.xml:683 msgid "Print information related to downloading packages using HTTP." msgstr "HTTP を用ã„ãŸãƒ‘ッケージã®ãƒ€ã‚¦ãƒ³ãƒ­ãƒ¼ãƒ‰ã«é–¢ã™ã‚‹æƒ…報を出力ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:685 +#: apt.conf.5.xml:690 msgid "<literal>Debug::Acquire::https</literal>" msgstr "<literal>Debug::Acquire::https</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:689 +#: apt.conf.5.xml:694 msgid "Print information related to downloading packages using HTTPS." msgstr "HTTPS を用ã„ãŸãƒ‘ッケージã®ãƒ€ã‚¦ãƒ³ãƒ­ãƒ¼ãƒ‰ã«é–¢ã™ã‚‹æƒ…報を出力ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:696 +#: apt.conf.5.xml:701 msgid "<literal>Debug::Acquire::gpgv</literal>" msgstr "<literal>Debug::Acquire::gpgv</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:700 +#: apt.conf.5.xml:705 msgid "" "Print information related to verifying cryptographic signatures using " "<literal>gpg</literal>." @@ -7260,46 +7275,46 @@ msgstr "" "<literal>gpg</literal> を用ã„ãŸæš—å·ç½²åã®æ¤œè¨¼ã«é–¢ã™ã‚‹æƒ…報を出力ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:707 +#: apt.conf.5.xml:712 msgid "<literal>Debug::aptcdrom</literal>" msgstr "<literal>Debug::aptcdrom</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:711 +#: apt.conf.5.xml:716 msgid "" "Output information about the process of accessing collections of packages " "stored on CD-ROMs." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:718 +#: apt.conf.5.xml:723 msgid "<literal>Debug::BuildDeps</literal>" msgstr "<literal>Debug::BuildDeps</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:721 +#: apt.conf.5.xml:726 msgid "Describes the process of resolving build-dependencies in &apt-get;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:728 +#: apt.conf.5.xml:733 msgid "<literal>Debug::Hashes</literal>" msgstr "<literal>Debug::Hashes</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:731 +#: apt.conf.5.xml:736 msgid "" "Output each cryptographic hash that is generated by the <literal>apt</" "literal> libraries." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:738 +#: apt.conf.5.xml:743 msgid "<literal>Debug::IdentCDROM</literal>" msgstr "<literal>Debug::IdentCDROM</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:741 +#: apt.conf.5.xml:746 msgid "" "Do not include information from <literal>statfs</literal>, namely the number " "of used and free blocks on the CD-ROM filesystem, when generating an ID for " @@ -7307,93 +7322,93 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:749 +#: apt.conf.5.xml:754 msgid "<literal>Debug::NoLocking</literal>" msgstr "<literal>Debug::NoLocking</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:752 +#: apt.conf.5.xml:757 msgid "" "Disable all file locking. For instance, this will allow two instances of " "<quote><literal>apt-get update</literal></quote> to run at the same time." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:760 +#: apt.conf.5.xml:765 msgid "<literal>Debug::pkgAcquire</literal>" msgstr "<literal>Debug::pkgAcquire</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:764 +#: apt.conf.5.xml:769 msgid "Log when items are added to or removed from the global download queue." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:771 +#: apt.conf.5.xml:776 msgid "<literal>Debug::pkgAcquire::Auth</literal>" msgstr "<literal>Debug::pkgAcquire::Auth</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:774 +#: apt.conf.5.xml:779 msgid "" "Output status messages and errors related to verifying checksums and " "cryptographic signatures of downloaded files." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:781 +#: apt.conf.5.xml:786 msgid "<literal>Debug::pkgAcquire::Diffs</literal>" msgstr "<literal>Debug::pkgAcquire::Diffs</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:784 +#: apt.conf.5.xml:789 msgid "" "Output information about downloading and applying package index list diffs, " "and errors relating to package index list diffs." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:792 +#: apt.conf.5.xml:797 msgid "<literal>Debug::pkgAcquire::RRed</literal>" msgstr "<literal>Debug::pkgAcquire::RRed</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:796 +#: apt.conf.5.xml:801 msgid "" "Output information related to patching apt package lists when downloading " "index diffs instead of full indices." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:803 +#: apt.conf.5.xml:808 msgid "<literal>Debug::pkgAcquire::Worker</literal>" msgstr "<literal>Debug::pkgAcquire::Worker</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:807 +#: apt.conf.5.xml:812 msgid "" "Log all interactions with the sub-processes that actually perform downloads." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:814 +#: apt.conf.5.xml:819 msgid "<literal>Debug::pkgAutoRemove</literal>" msgstr "<literal>Debug::pkgAutoRemove</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:818 +#: apt.conf.5.xml:823 msgid "" "Log events related to the automatically-installed status of packages and to " "the removal of unused packages." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:825 +#: apt.conf.5.xml:830 msgid "<literal>Debug::pkgDepCache::AutoInstall</literal>" msgstr "<literal>Debug::pkgDepCache::AutoInstall</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:828 +#: apt.conf.5.xml:833 msgid "" "Generate debug messages describing which packages are being automatically " "installed to resolve dependencies. This corresponds to the initial auto-" @@ -7403,12 +7418,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:839 +#: apt.conf.5.xml:844 msgid "<literal>Debug::pkgDepCache::Marker</literal>" msgstr "<literal>Debug::pkgDepCache::Marker</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:842 +#: apt.conf.5.xml:847 msgid "" "Generate debug messages describing which package is marked as keep/install/" "remove while the ProblemResolver does his work. Each addition or deletion " @@ -7425,91 +7440,91 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:861 +#: apt.conf.5.xml:866 msgid "<literal>Debug::pkgInitConfig</literal>" msgstr "<literal>Debug::pkgInitConfig</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:864 +#: apt.conf.5.xml:869 msgid "Dump the default configuration to standard error on startup." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:871 +#: apt.conf.5.xml:876 msgid "<literal>Debug::pkgDPkgPM</literal>" msgstr "<literal>Debug::pkgDPkgPM</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:874 +#: apt.conf.5.xml:879 msgid "" "When invoking &dpkg;, output the precise command line with which it is being " "invoked, with arguments separated by a single space character." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:882 +#: apt.conf.5.xml:887 msgid "<literal>Debug::pkgDPkgProgressReporting</literal>" msgstr "<literal>Debug::pkgDPkgProgressReporting</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:885 +#: apt.conf.5.xml:890 msgid "" "Output all the data received from &dpkg; on the status file descriptor and " "any errors encountered while parsing it." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:892 +#: apt.conf.5.xml:897 msgid "<literal>Debug::pkgOrderList</literal>" msgstr "<literal>Debug::pkgOrderList</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:896 +#: apt.conf.5.xml:901 msgid "" "Generate a trace of the algorithm that decides the order in which " "<literal>apt</literal> should pass packages to &dpkg;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:904 +#: apt.conf.5.xml:909 msgid "<literal>Debug::pkgPackageManager</literal>" msgstr "<literal>Debug::pkgPackageManager</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:908 +#: apt.conf.5.xml:913 msgid "" "Output status messages tracing the steps performed when invoking &dpkg;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:915 +#: apt.conf.5.xml:920 msgid "<literal>Debug::pkgPolicy</literal>" msgstr "<literal>Debug::pkgPolicy</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:919 +#: apt.conf.5.xml:924 msgid "Output the priority of each package list on startup." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:925 +#: apt.conf.5.xml:930 msgid "<literal>Debug::pkgProblemResolver</literal>" msgstr "<literal>Debug::pkgProblemResolver</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:929 +#: apt.conf.5.xml:934 msgid "" "Trace the execution of the dependency resolver (this applies only to what " "happens when a complex dependency problem is encountered)." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:937 +#: apt.conf.5.xml:942 msgid "<literal>Debug::pkgProblemResolver::ShowScores</literal>" msgstr "<literal>Debug::pkgProblemResolver::ShowScores</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:940 +#: apt.conf.5.xml:945 msgid "" "Display a list of all installed packages with their calculated score used by " "the pkgProblemResolver. The description of the package is the same as " @@ -7517,12 +7532,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:948 +#: apt.conf.5.xml:953 msgid "<literal>Debug::sourceList</literal>" msgstr "<literal>Debug::sourceList</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:952 +#: apt.conf.5.xml:957 msgid "" "Print information about the vendors read from <filename>/etc/apt/vendors." "list</filename>." @@ -7530,7 +7545,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:974 +#: apt.conf.5.xml:979 msgid "" "&configureindex; is a configuration file showing example values for all " "possible options." @@ -7540,7 +7555,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><variablelist> -#: apt.conf.5.xml:981 +#: apt.conf.5.xml:986 #, fuzzy #| msgid "&apt-conf;" msgid "&file-aptconf;" @@ -7549,7 +7564,7 @@ msgstr "&apt-conf;" # type: Content of: <refentry><refsect1><para> #. ? reading apt.conf #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:986 +#: apt.conf.5.xml:991 msgid "&apt-cache;, &apt-config;, &apt-preferences;." msgstr "&apt-cache;, &apt-config;, &apt-preferences;." @@ -9151,6 +9166,24 @@ msgstr "" "準㮠<command>find</command> コマンドや <command>dd</command> コマンドを使用" "ã—ã¾ã™ã€‚" +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: sources.list.5.xml:178 +msgid "more recongnizable URI types" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:180 +msgid "" +"APT can be extended with more methods shipped in other optional packages " +"which should follow the nameing scheme <literal>apt-transport-" +"<replaceable>method</replaceable></literal>. The APT team e.g. maintain " +"also the <literal>apt-transport-https</literal> package which provides " +"access methods for https-URIs with features similiar to the http method, but " +"other methods for using e.g. debtorrent are also available, see " +"<citerefentry> <refentrytitle><filename>apt-transport-debtorrent</filename></" +"refentrytitle> <manvolnum>1</manvolnum></citerefentry>." +msgstr "" + # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> #: sources.list.5.xml:122 @@ -9163,7 +9196,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:182 +#: sources.list.5.xml:194 msgid "" "Uses the archive stored locally (or NFS mounted) at /home/jason/debian for " "stable/main, stable/contrib, and stable/non-free." @@ -9172,38 +9205,38 @@ msgstr "" "free 用ã®ãƒ­ãƒ¼ã‚«ãƒ« (ã¾ãŸã¯ NFS) アーカイブを使用ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><literallayout> -#: sources.list.5.xml:184 +#: sources.list.5.xml:196 #, no-wrap msgid "deb file:/home/jason/debian stable main contrib non-free" msgstr "deb file:/home/jason/debian stable main contrib non-free" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:186 +#: sources.list.5.xml:198 msgid "As above, except this uses the unstable (development) distribution." msgstr "上記åŒæ§˜ã§ã™ãŒã€ä¸å®‰å®šç‰ˆ (開発版) を使用ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><literallayout> -#: sources.list.5.xml:187 +#: sources.list.5.xml:199 #, no-wrap msgid "deb file:/home/jason/debian unstable main contrib non-free" msgstr "deb file:/home/jason/debian unstable main contrib non-free" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:189 +#: sources.list.5.xml:201 msgid "Source line for the above" msgstr "上記ã®ã‚½ãƒ¼ã‚¹è¡Œ" #. type: Content of: <refentry><refsect1><literallayout> -#: sources.list.5.xml:190 +#: sources.list.5.xml:202 #, no-wrap msgid "deb-src file:/home/jason/debian unstable main contrib non-free" msgstr "deb-src file:/home/jason/debian unstable main contrib non-free" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:192 +#: sources.list.5.xml:204 msgid "" "Uses HTTP to access the archive at archive.debian.org, and uses only the " "hamm/main area." @@ -9213,14 +9246,14 @@ msgstr "" # type: <example></example> #. type: Content of: <refentry><refsect1><literallayout> -#: sources.list.5.xml:194 +#: sources.list.5.xml:206 #, no-wrap msgid "deb http://archive.debian.org/debian-archive hamm main" msgstr "deb http://archive.debian.org/debian-archive hamm main" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:196 +#: sources.list.5.xml:208 msgid "" "Uses FTP to access the archive at ftp.debian.org, under the debian " "directory, and uses only the stable/contrib area." @@ -9230,14 +9263,14 @@ msgstr "" # type: <example></example> #. type: Content of: <refentry><refsect1><literallayout> -#: sources.list.5.xml:198 +#: sources.list.5.xml:210 #, no-wrap msgid "deb ftp://ftp.debian.org/debian stable contrib" msgstr "deb ftp://ftp.debian.org/debian stable contrib" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:200 +#: sources.list.5.xml:212 msgid "" "Uses FTP to access the archive at ftp.debian.org, under the debian " "directory, and uses only the unstable/contrib area. If this line appears as " @@ -9251,14 +9284,14 @@ msgstr "" # type: <example></example> #. type: Content of: <refentry><refsect1><literallayout> -#: sources.list.5.xml:204 +#: sources.list.5.xml:216 #, no-wrap msgid "deb ftp://ftp.debian.org/debian unstable contrib" msgstr "deb ftp://ftp.debian.org/debian unstable contrib" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:206 +#: sources.list.5.xml:218 msgid "" "Uses HTTP to access the archive at nonus.debian.org, under the debian-non-US " "directory." @@ -9267,20 +9300,20 @@ msgstr "" "下を使用ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><literallayout> -#: sources.list.5.xml:208 +#: sources.list.5.xml:220 #, no-wrap msgid "deb http://nonus.debian.org/debian-non-US stable/non-US main contrib non-free" msgstr "deb http://nonus.debian.org/debian-non-US stable/non-US main contrib non-free" #. type: Content of: <refentry><refsect1><para><literallayout> -#: sources.list.5.xml:217 +#: sources.list.5.xml:229 #, no-wrap msgid "deb http://ftp.de.debian.org/debian-non-US unstable/binary-$(ARCH)/" msgstr "deb http://ftp.de.debian.org/debian-non-US unstable/binary-$(ARCH)/" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:210 +#: sources.list.5.xml:222 msgid "" "Uses HTTP to access the archive at nonus.debian.org, under the debian-non-US " "directory, and uses only files found under <filename>unstable/binary-i386</" @@ -9299,7 +9332,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:222 +#: sources.list.5.xml:234 msgid "&apt-cache; &apt-conf;" msgstr "&apt-cache; &apt-conf;" -- cgit v1.2.3 From 5632b305b24161e18a809b4bb33a19ec8ea3d497 Mon Sep 17 00:00:00 2001 From: David Kalnischkies <kalnischkies@gmail.com> Date: Sun, 18 Oct 2009 10:43:25 +0200 Subject: correct apt-mark showauto synopsis, thanks Andrew Schulman (Closes: #551440) --- doc/apt-mark.8.xml | 2 +- doc/po/apt-doc.pot | 6 +++--- doc/po/fr.po | 6 +++--- doc/po/ja.po | 6 +++--- 4 files changed, 10 insertions(+), 10 deletions(-) (limited to 'doc') diff --git a/doc/apt-mark.8.xml b/doc/apt-mark.8.xml index 35412d7c9..3f6cc78f5 100644 --- a/doc/apt-mark.8.xml +++ b/doc/apt-mark.8.xml @@ -80,7 +80,7 @@ <varlistentry><term>showauto</term> <listitem><para><literal>showauto</literal> is used to print a - list of manually installed packages with each package on a new line. + list of automatically installed packages with each package on a new line. </para></listitem> </varlistentry> </variablelist> diff --git a/doc/po/apt-doc.pot b/doc/po/apt-doc.pot index 00818eb27..20f563c46 100644 --- a/doc/po/apt-doc.pot +++ b/doc/po/apt-doc.pot @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2009-10-14 07:44+0300\n" +"POT-Creation-Date: 2009-10-18 10:39+0300\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -3812,8 +3812,8 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-mark.8.xml:82 msgid "" -"<literal>showauto</literal> is used to print a list of manually installed " -"packages with each package on a new line." +"<literal>showauto</literal> is used to print a list of automatically " +"installed packages with each package on a new line." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> diff --git a/doc/po/fr.po b/doc/po/fr.po index 89cd1df34..b0fe59e86 100644 --- a/doc/po/fr.po +++ b/doc/po/fr.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" -"POT-Creation-Date: 2009-10-14 07:44+0300\n" +"POT-Creation-Date: 2009-10-18 10:39+0300\n" "PO-Revision-Date: 2009-09-26 19:25+0200\n" "Last-Translator: Christian Perrier <bubulle@debian.org>\n" "Language-Team: French <debian-l10n-french@lists.debian.org>\n" @@ -5036,8 +5036,8 @@ msgstr "" #| "automatically installed to satisfy dependencies for some package and that " #| "are no more needed." msgid "" -"<literal>showauto</literal> is used to print a list of manually installed " -"packages with each package on a new line." +"<literal>showauto</literal> is used to print a list of automatically " +"installed packages with each package on a new line." msgstr "" "Avec la commande <literal>autoremove</literal>, apt-get supprime les paquets " "installés dans le but de satisfaire les dépendances d'un paquet donné et qui " diff --git a/doc/po/ja.po b/doc/po/ja.po index c4e004415..c51567453 100644 --- a/doc/po/ja.po +++ b/doc/po/ja.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2009-10-14 07:44+0300\n" +"POT-Creation-Date: 2009-10-18 10:39+0300\n" "PO-Revision-Date: 2009-07-30 22:55+0900\n" "Last-Translator: KURASAWA Nozomu <nabetaro@caldron.jp>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -5222,8 +5222,8 @@ msgstr "" #| "automatically installed to satisfy dependencies for some package and that " #| "are no more needed." msgid "" -"<literal>showauto</literal> is used to print a list of manually installed " -"packages with each package on a new line." +"<literal>showauto</literal> is used to print a list of automatically " +"installed packages with each package on a new line." msgstr "" "<literal>autoremove</literal> ã¯ã€ä¾å­˜é–¢ä¿‚を満ãŸã™ãŸã‚ã«è‡ªå‹•çš„ã«ã‚¤ãƒ³ã‚¹ãƒˆãƒ¼ãƒ«" "ã•ã‚Œã€ã‚‚ã†å¿…è¦ãªããªã£ãŸãƒ‘ッケージを削除ã™ã‚‹ã®ã«ä½¿ç”¨ã—ã¾ã™ã€‚" -- cgit v1.2.3 From 20382badcd5394808c6c8161a165891027a30726 Mon Sep 17 00:00:00 2001 From: David Kalnischkies <kalnischkies@gmail.com> Date: Mon, 19 Oct 2009 22:00:37 +0200 Subject: add more description to the manpage for the Immediate-Configuration and change another message to be also translatable. --- doc/apt.conf.5.xml | 10 +- doc/po/apt-doc.pot | 384 +++++++++++++++++++++++++++-------------------------- doc/po/fr.po | 372 ++++++++++++++++++++++++++------------------------- doc/po/ja.po | 372 ++++++++++++++++++++++++++------------------------- 4 files changed, 580 insertions(+), 558 deletions(-) (limited to 'doc') diff --git a/doc/apt.conf.5.xml b/doc/apt.conf.5.xml index 0cd63b31c..6ee719987 100644 --- a/doc/apt.conf.5.xml +++ b/doc/apt.conf.5.xml @@ -158,7 +158,7 @@ DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt";}; <varlistentry><term>Immediate-Configure</term> <listitem><para>Defaults to on which will cause APT to install essential and important packages as fast as possible in the install/upgrade operation. This is done to limit the effect of a failing - &dpkg; call: If this option is disabled APT doesn't treat an important package in the same way as + &dpkg; call: If this option is disabled APT does treat an important package in the same way as an extra package: Between the unpacking of the important package A and his configuration can then be many other unpack or configuration calls, e.g. for package B which has no relation to A, but causes the dpkg call to fail (e.g. because maintainer script of package B generates an error) which results @@ -170,8 +170,12 @@ DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt";}; refers to this option so the user can deactivate the immediate configuration temporary to be able to perform an install/upgrade again. Note the use of the word "theory" here as this problem was only encountered by now in real world a few times in non-stable distribution versions and caused by wrong dependencies of the package - in question, so you should not blindly disable this option as the mentioned scenario above is not the only - problem immediate configuration can help to prevent in the first place.</para></listitem> + in question or by a system in an already broken state, so you should not blindly disable this option as + the mentioned scenario above is not the only problem immediate configuration can help to prevent in the first place. + Before a big operation like <literal>dist-upgrade</literal> is run with this option disabled it should be tried to + explicitly <literal>install</literal> the package APT is unable to configure immediately, but please make sure to + report your problem also to your distribution and to the APT team with the buglink below so they can work on + improving or correcting the upgrade process.</para></listitem> </varlistentry> <varlistentry><term>Force-LoopBreak</term> diff --git a/doc/po/apt-doc.pot b/doc/po/apt-doc.pot index 20f563c46..4f52ceda1 100644 --- a/doc/po/apt-doc.pot +++ b/doc/po/apt-doc.pot @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2009-10-18 10:39+0300\n" +"POT-Creation-Date: 2009-10-19 21:56+0300\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -1218,7 +1218,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt-cache.8.xml:281 apt-config.8.xml:93 apt-extracttemplates.1.xml:56 apt-ftparchive.1.xml:492 apt-get.8.xml:319 apt-mark.8.xml:89 apt-sortpkgs.1.xml:54 apt.conf.5.xml:452 apt.conf.5.xml:474 +#: apt-cache.8.xml:281 apt-config.8.xml:93 apt-extracttemplates.1.xml:56 apt-ftparchive.1.xml:492 apt-get.8.xml:319 apt-mark.8.xml:89 apt-sortpkgs.1.xml:54 apt.conf.5.xml:456 apt.conf.5.xml:478 msgid "options" msgstr "" @@ -1416,7 +1416,7 @@ msgid "&apt-commonoptions;" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt-cache.8.xml:361 apt-get.8.xml:559 apt-key.8.xml:138 apt-mark.8.xml:122 apt.conf.5.xml:984 apt_preferences.5.xml:615 +#: apt-cache.8.xml:361 apt-get.8.xml:559 apt-key.8.xml:138 apt-mark.8.xml:122 apt.conf.5.xml:988 apt_preferences.5.xml:615 msgid "Files" msgstr "" @@ -1426,7 +1426,7 @@ msgid "&file-sourceslist; &file-statelists;" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt-cache.8.xml:368 apt-cdrom.8.xml:155 apt-config.8.xml:103 apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:563 apt-get.8.xml:569 apt-key.8.xml:162 apt-mark.8.xml:133 apt-secure.8.xml:181 apt-sortpkgs.1.xml:69 apt.conf.5.xml:990 apt_preferences.5.xml:622 sources.list.5.xml:233 +#: apt-cache.8.xml:368 apt-cdrom.8.xml:155 apt-config.8.xml:103 apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:563 apt-get.8.xml:569 apt-key.8.xml:162 apt-mark.8.xml:133 apt-secure.8.xml:181 apt-sortpkgs.1.xml:69 apt.conf.5.xml:994 apt_preferences.5.xml:622 sources.list.5.xml:233 msgid "See Also" msgstr "" @@ -2681,7 +2681,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt-ftparchive.1.xml:552 apt.conf.5.xml:978 apt_preferences.5.xml:462 sources.list.5.xml:193 +#: apt-ftparchive.1.xml:552 apt.conf.5.xml:982 apt_preferences.5.xml:462 sources.list.5.xml:193 msgid "Examples" msgstr "" @@ -4411,34 +4411,40 @@ msgid "" "Defaults to on which will cause APT to install essential and important " "packages as fast as possible in the install/upgrade operation. This is done " "to limit the effect of a failing &dpkg; call: If this option is disabled APT " -"doesn't treat an important package in the same way as an extra package: " -"Between the unpacking of the important package A and his configuration can " -"then be many other unpack or configuration calls, e.g. for package B which " -"has no relation to A, but causes the dpkg call to fail (e.g. because " -"maintainer script of package B generates an error) which results in a system " -"state in which package A is unpacked but unconfigured - each package " -"depending on A is now no longer guaranteed to work as their dependency on A " -"is not longer satisfied. The immediate configuration marker is also applied " -"to all dependencies which can generate a problem if the dependencies " -"e.g. form a circle as a dependency with the immediate flag is comparable " -"with a Pre-Dependency. So in theory it is possible that APT encounters a " -"situation in which it is unable to perform immediate configuration, error " -"out and refers to this option so the user can deactivate the immediate " -"configuration temporary to be able to perform an install/upgrade again. Note " -"the use of the word \"theory\" here as this problem was only encountered by " -"now in real world a few times in non-stable distribution versions and caused " -"by wrong dependencies of the package in question, so you should not blindly " -"disable this option as the mentioned scenario above is not the only problem " -"immediate configuration can help to prevent in the first place." -msgstr "" - -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:177 +"does treat an important package in the same way as an extra package: Between " +"the unpacking of the important package A and his configuration can then be " +"many other unpack or configuration calls, e.g. for package B which has no " +"relation to A, but causes the dpkg call to fail (e.g. because maintainer " +"script of package B generates an error) which results in a system state in " +"which package A is unpacked but unconfigured - each package depending on A " +"is now no longer guaranteed to work as their dependency on A is not longer " +"satisfied. The immediate configuration marker is also applied to all " +"dependencies which can generate a problem if the dependencies e.g. form a " +"circle as a dependency with the immediate flag is comparable with a " +"Pre-Dependency. So in theory it is possible that APT encounters a situation " +"in which it is unable to perform immediate configuration, error out and " +"refers to this option so the user can deactivate the immediate configuration " +"temporary to be able to perform an install/upgrade again. Note the use of " +"the word \"theory\" here as this problem was only encountered by now in real " +"world a few times in non-stable distribution versions and caused by wrong " +"dependencies of the package in question or by a system in an already broken " +"state, so you should not blindly disable this option as the mentioned " +"scenario above is not the only problem immediate configuration can help to " +"prevent in the first place. Before a big operation like " +"<literal>dist-upgrade</literal> is run with this option disabled it should " +"be tried to explicitly <literal>install</literal> the package APT is unable " +"to configure immediately, but please make sure to report your problem also " +"to your distribution and to the APT team with the buglink below so they can " +"work on improving or correcting the upgrade process." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:181 msgid "Force-LoopBreak" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:178 +#: apt.conf.5.xml:182 msgid "" "Never Enable this option unless you -really- know what you are doing. It " "permits APT to temporarily remove an essential package to break a " @@ -4449,87 +4455,87 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:186 +#: apt.conf.5.xml:190 msgid "Cache-Limit" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:187 +#: apt.conf.5.xml:191 msgid "" "APT uses a fixed size memory mapped cache file to store the 'available' " "information. This sets the size of that cache (in bytes)." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:191 +#: apt.conf.5.xml:195 msgid "Build-Essential" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:192 +#: apt.conf.5.xml:196 msgid "Defines which package(s) are considered essential build dependencies." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:195 +#: apt.conf.5.xml:199 msgid "Get" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:196 +#: apt.conf.5.xml:200 msgid "" "The Get subsection controls the &apt-get; tool, please see its documentation " "for more information about the options here." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:200 +#: apt.conf.5.xml:204 msgid "Cache" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:201 +#: apt.conf.5.xml:205 msgid "" "The Cache subsection controls the &apt-cache; tool, please see its " "documentation for more information about the options here." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:205 +#: apt.conf.5.xml:209 msgid "CDROM" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:206 +#: apt.conf.5.xml:210 msgid "" "The CDROM subsection controls the &apt-cdrom; tool, please see its " "documentation for more information about the options here." msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:212 +#: apt.conf.5.xml:216 msgid "The Acquire Group" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:217 +#: apt.conf.5.xml:221 msgid "PDiffs" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:218 +#: apt.conf.5.xml:222 msgid "" "Try to download deltas called <literal>PDiffs</literal> for Packages or " "Sources files instead of downloading whole ones. True by default." msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:223 +#: apt.conf.5.xml:227 msgid "Queue-Mode" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:224 +#: apt.conf.5.xml:228 msgid "" "Queuing mode; <literal>Queue-Mode</literal> can be one of " "<literal>host</literal> or <literal>access</literal> which determines how " @@ -4539,36 +4545,36 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:231 +#: apt.conf.5.xml:235 msgid "Retries" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:232 +#: apt.conf.5.xml:236 msgid "" "Number of retries to perform. If this is non-zero APT will retry failed " "files the given number of times." msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:236 +#: apt.conf.5.xml:240 msgid "Source-Symlinks" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:237 +#: apt.conf.5.xml:241 msgid "" "Use symlinks for source archives. If set to true then source archives will " "be symlinked when possible instead of copying. True is the default." msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:241 sources.list.5.xml:139 +#: apt.conf.5.xml:245 sources.list.5.xml:139 msgid "http" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:242 +#: apt.conf.5.xml:246 msgid "" "HTTP URIs; http::Proxy is the default http proxy to use. It is in the " "standard form of <literal>http://[[user][:pass]@]host[:port]/</literal>. Per " @@ -4580,7 +4586,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:250 +#: apt.conf.5.xml:254 msgid "" "Three settings are provided for cache control with HTTP/1.1 compliant proxy " "caches. <literal>No-Cache</literal> tells the proxy to not use its cached " @@ -4594,7 +4600,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:260 apt.conf.5.xml:317 +#: apt.conf.5.xml:264 apt.conf.5.xml:321 msgid "" "The option <literal>timeout</literal> sets the timeout timer used by the " "method, this applies to all things including connection timeout and data " @@ -4602,7 +4608,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:263 +#: apt.conf.5.xml:267 msgid "" "One setting is provided to control the pipeline depth in cases where the " "remote server is not RFC conforming or buggy (such as Squid 2.0.2) " @@ -4614,7 +4620,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:271 +#: apt.conf.5.xml:275 msgid "" "The used bandwidth can be limited with " "<literal>Acquire::http::Dl-Limit</literal> which accepts integer values in " @@ -4624,12 +4630,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:277 +#: apt.conf.5.xml:281 msgid "https" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:278 +#: apt.conf.5.xml:282 msgid "" "HTTPS URIs. Cache-control and proxy options are the same as for " "<literal>http</literal> method. <literal>Pipeline-Depth</literal> option is " @@ -4637,7 +4643,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:282 +#: apt.conf.5.xml:286 msgid "" "<literal>CaInfo</literal> suboption specifies place of file that holds info " "about trusted certificates. <literal><host>::CaInfo</literal> is " @@ -4659,12 +4665,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:300 sources.list.5.xml:150 +#: apt.conf.5.xml:304 sources.list.5.xml:150 msgid "ftp" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:301 +#: apt.conf.5.xml:305 msgid "" "FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the standard " "form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. Per host " @@ -4684,7 +4690,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:320 +#: apt.conf.5.xml:324 msgid "" "Several settings are provided to control passive mode. Generally it is safe " "to leave passive mode on, it works in nearly every environment. However " @@ -4694,7 +4700,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:327 +#: apt.conf.5.xml:331 msgid "" "It is possible to proxy FTP over HTTP by setting the " "<envar>ftp_proxy</envar> environment variable to a http url - see the " @@ -4704,7 +4710,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:332 +#: apt.conf.5.xml:336 msgid "" "The setting <literal>ForceExtended</literal> controls the use of RFC2428 " "<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is " @@ -4714,18 +4720,18 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:339 sources.list.5.xml:132 +#: apt.conf.5.xml:343 sources.list.5.xml:132 msgid "cdrom" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:345 +#: apt.conf.5.xml:349 #, no-wrap msgid "/cdrom/::Mount \"foo\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:340 +#: apt.conf.5.xml:344 msgid "" "CDROM URIs; the only setting for CDROM URIs is the mount point, " "<literal>cdrom::Mount</literal> which must be the mount point for the CDROM " @@ -4738,12 +4744,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:350 +#: apt.conf.5.xml:354 msgid "gpgv" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:351 +#: apt.conf.5.xml:355 msgid "" "GPGV URIs; the only option for GPGV URIs is the option to pass additional " "parameters to gpgv. <literal>gpgv::Options</literal> Additional options " @@ -4751,12 +4757,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:356 +#: apt.conf.5.xml:360 msgid "CompressionTypes" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:362 +#: apt.conf.5.xml:366 #, no-wrap msgid "" "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> " @@ -4764,7 +4770,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:357 +#: apt.conf.5.xml:361 msgid "" "List of compression types which are understood by the acquire methods. " "Files like <filename>Packages</filename> can be available in various " @@ -4776,19 +4782,19 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:367 +#: apt.conf.5.xml:371 #, no-wrap msgid "Acquire::CompressionTypes::Order:: \"gz\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:370 +#: apt.conf.5.xml:374 #, no-wrap msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:363 +#: apt.conf.5.xml:367 msgid "" "Also the <literal>Order</literal> subgroup can be used to define in which " "order the acquire system will try to download the compressed files. The " @@ -4805,13 +4811,13 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:374 +#: apt.conf.5.xml:378 #, no-wrap msgid "Dir::Bin::bzip2 \"/bin/bzip2\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:372 +#: apt.conf.5.xml:376 msgid "" "Note that at run time the " "<literal>Dir::Bin::<replaceable>Methodname</replaceable></literal> will be " @@ -4826,7 +4832,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:379 +#: apt.conf.5.xml:383 msgid "" "While it is possible to add an empty compression type to the order list, but " "APT in its current version doesn't understand it correctly and will display " @@ -4836,7 +4842,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:213 +#: apt.conf.5.xml:217 msgid "" "The <literal>Acquire</literal> group of options controls the download of " "packages and the URI handlers. <placeholder type=\"variablelist\" " @@ -4844,12 +4850,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:388 +#: apt.conf.5.xml:392 msgid "Directories" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:390 +#: apt.conf.5.xml:394 msgid "" "The <literal>Dir::State</literal> section has directories that pertain to " "local state information. <literal>lists</literal> is the directory to place " @@ -4861,7 +4867,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:397 +#: apt.conf.5.xml:401 msgid "" "<literal>Dir::Cache</literal> contains locations pertaining to local cache " "information, such as the two package caches <literal>srcpkgcache</literal> " @@ -4874,7 +4880,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:406 +#: apt.conf.5.xml:410 msgid "" "<literal>Dir::Etc</literal> contains the location of configuration files, " "<literal>sourcelist</literal> gives the location of the sourcelist and " @@ -4884,7 +4890,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:412 +#: apt.conf.5.xml:416 msgid "" "The <literal>Dir::Parts</literal> setting reads in all the config fragments " "in lexical order from the directory specified. After this is done then the " @@ -4892,7 +4898,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:416 +#: apt.conf.5.xml:420 msgid "" "Binary programs are pointed to by " "<literal>Dir::Bin</literal>. <literal>Dir::Bin::Methods</literal> specifies " @@ -4904,7 +4910,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:424 +#: apt.conf.5.xml:428 msgid "" "The configuration item <literal>RootDir</literal> has a special meaning. If " "set, all paths in <literal>Dir::</literal> will be relative to " @@ -4917,12 +4923,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:437 +#: apt.conf.5.xml:441 msgid "APT in DSelect" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:439 +#: apt.conf.5.xml:443 msgid "" "When APT is used as a &dselect; method several configuration directives " "control the default behaviour. These are in the <literal>DSelect</literal> " @@ -4930,12 +4936,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:443 +#: apt.conf.5.xml:447 msgid "Clean" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:444 +#: apt.conf.5.xml:448 msgid "" "Cache Clean mode; this value may be one of always, prompt, auto, pre-auto " "and never. always and prompt will remove all packages from the cache after " @@ -4946,50 +4952,50 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:453 +#: apt.conf.5.xml:457 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the install phase." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:457 +#: apt.conf.5.xml:461 msgid "Updateoptions" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:458 +#: apt.conf.5.xml:462 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the update phase." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:462 +#: apt.conf.5.xml:466 msgid "PromptAfterUpdate" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:463 +#: apt.conf.5.xml:467 msgid "" "If true the [U]pdate operation in &dselect; will always prompt to continue. " "The default is to prompt only on error." msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:469 +#: apt.conf.5.xml:473 msgid "How APT calls dpkg" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:470 +#: apt.conf.5.xml:474 msgid "" "Several configuration directives control how APT invokes &dpkg;. These are " "in the <literal>DPkg</literal> section." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:475 +#: apt.conf.5.xml:479 msgid "" "This is a list of options to pass to dpkg. The options must be specified " "using the list notation and each list item is passed as a single argument to " @@ -4997,17 +5003,17 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:480 +#: apt.conf.5.xml:484 msgid "Pre-Invoke" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:480 +#: apt.conf.5.xml:484 msgid "Post-Invoke" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:481 +#: apt.conf.5.xml:485 msgid "" "This is a list of shell commands to run before/after invoking &dpkg;. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -5016,12 +5022,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:487 +#: apt.conf.5.xml:491 msgid "Pre-Install-Pkgs" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:488 +#: apt.conf.5.xml:492 msgid "" "This is a list of shell commands to run before invoking dpkg. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -5031,7 +5037,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:494 +#: apt.conf.5.xml:498 msgid "" "Version 2 of this protocol dumps more information, including the protocol " "version, the APT configuration space and the packages, files and versions " @@ -5042,36 +5048,36 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:501 +#: apt.conf.5.xml:505 msgid "Run-Directory" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:502 +#: apt.conf.5.xml:506 msgid "" "APT chdirs to this directory before invoking dpkg, the default is " "<filename>/</filename>." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:506 +#: apt.conf.5.xml:510 msgid "Build-options" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:507 +#: apt.conf.5.xml:511 msgid "" "These options are passed to &dpkg-buildpackage; when compiling packages, the " "default is to disable signing and produce all binaries." msgstr "" #. type: Content of: <refentry><refsect1><refsect2><title> -#: apt.conf.5.xml:512 +#: apt.conf.5.xml:516 msgid "dpkg trigger usage (and related options)" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:513 +#: apt.conf.5.xml:517 msgid "" "APT can call dpkg in a way so it can make aggressive use of triggers over " "multiply calls of dpkg. Without further options dpkg will use triggers only " @@ -5086,7 +5092,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para><literallayout> -#: apt.conf.5.xml:528 +#: apt.conf.5.xml:532 #, no-wrap msgid "" "DPkg::NoTriggers \"true\";\n" @@ -5096,7 +5102,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:522 +#: apt.conf.5.xml:526 msgid "" "Note that it is not guaranteed that APT will support these options or that " "these options will not cause (big) trouble in the future. If you have " @@ -5110,12 +5116,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:534 +#: apt.conf.5.xml:538 msgid "DPkg::NoTriggers" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:535 +#: apt.conf.5.xml:539 msgid "" "Add the no triggers flag to all dpkg calls (expect the ConfigurePending " "call). See &dpkg; if you are interested in what this actually means. In " @@ -5127,12 +5133,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:542 +#: apt.conf.5.xml:546 msgid "PackageManager::Configure" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:543 +#: apt.conf.5.xml:547 msgid "" "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " "and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default " @@ -5149,12 +5155,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:553 +#: apt.conf.5.xml:557 msgid "DPkg::ConfigurePending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:554 +#: apt.conf.5.xml:558 msgid "" "If this option is set apt will call <command>dpkg --configure " "--pending</command> to let dpkg handle all required configurations and " @@ -5166,12 +5172,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:560 +#: apt.conf.5.xml:564 msgid "DPkg::TriggersPending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:561 +#: apt.conf.5.xml:565 msgid "" "Useful for <literal>smart</literal> configuration as a package which has " "pending triggers is not considered as <literal>installed</literal> and dpkg " @@ -5181,12 +5187,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:566 +#: apt.conf.5.xml:570 msgid "PackageManager::UnpackAll" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:567 +#: apt.conf.5.xml:571 msgid "" "As the configuration can be deferred to be done at the end by dpkg it can be " "tried to order the unpack series only by critical needs, e.g. by " @@ -5198,12 +5204,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:574 +#: apt.conf.5.xml:578 msgid "OrderList::Score::Immediate" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:582 +#: apt.conf.5.xml:586 #, no-wrap msgid "" "OrderList::Score {\n" @@ -5215,7 +5221,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:575 +#: apt.conf.5.xml:579 msgid "" "Essential packages (and there dependencies) should be configured immediately " "after unpacking. It will be a good idea to do this quite early in the " @@ -5229,12 +5235,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:595 +#: apt.conf.5.xml:599 msgid "Periodic and Archives options" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:596 +#: apt.conf.5.xml:600 msgid "" "<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups " "of options configure behavior of apt periodic updates, which is done by " @@ -5243,12 +5249,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:604 +#: apt.conf.5.xml:608 msgid "Debug options" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:606 +#: apt.conf.5.xml:610 msgid "" "Enabling options in the <literal>Debug::</literal> section will cause " "debugging information to be sent to the standard error stream of the program " @@ -5259,7 +5265,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:617 +#: apt.conf.5.xml:621 msgid "" "<literal>Debug::pkgProblemResolver</literal> enables output about the " "decisions made by <literal>dist-upgrade, upgrade, install, remove, " @@ -5267,7 +5273,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:625 +#: apt.conf.5.xml:629 msgid "" "<literal>Debug::NoLocking</literal> disables all file locking. This can be " "used to run some operations (for instance, <literal>apt-get -s " @@ -5275,7 +5281,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:634 +#: apt.conf.5.xml:638 msgid "" "<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each " "time that <literal>apt</literal> invokes &dpkg;." @@ -5285,110 +5291,110 @@ msgstr "" #. motivating example, except I haven't a clue why you'd want #. to do this. #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:642 +#: apt.conf.5.xml:646 msgid "" "<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data " "in CDROM IDs." msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:652 +#: apt.conf.5.xml:656 msgid "A full list of debugging options to apt follows." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:657 +#: apt.conf.5.xml:661 msgid "<literal>Debug::Acquire::cdrom</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:661 +#: apt.conf.5.xml:665 msgid "Print information related to accessing <literal>cdrom://</literal> sources." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:668 +#: apt.conf.5.xml:672 msgid "<literal>Debug::Acquire::ftp</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:672 +#: apt.conf.5.xml:676 msgid "Print information related to downloading packages using FTP." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:679 +#: apt.conf.5.xml:683 msgid "<literal>Debug::Acquire::http</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:683 +#: apt.conf.5.xml:687 msgid "Print information related to downloading packages using HTTP." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:690 +#: apt.conf.5.xml:694 msgid "<literal>Debug::Acquire::https</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:694 +#: apt.conf.5.xml:698 msgid "Print information related to downloading packages using HTTPS." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:701 +#: apt.conf.5.xml:705 msgid "<literal>Debug::Acquire::gpgv</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:705 +#: apt.conf.5.xml:709 msgid "" "Print information related to verifying cryptographic signatures using " "<literal>gpg</literal>." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:712 +#: apt.conf.5.xml:716 msgid "<literal>Debug::aptcdrom</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:716 +#: apt.conf.5.xml:720 msgid "" "Output information about the process of accessing collections of packages " "stored on CD-ROMs." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:723 +#: apt.conf.5.xml:727 msgid "<literal>Debug::BuildDeps</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:726 +#: apt.conf.5.xml:730 msgid "Describes the process of resolving build-dependencies in &apt-get;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:733 +#: apt.conf.5.xml:737 msgid "<literal>Debug::Hashes</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:736 +#: apt.conf.5.xml:740 msgid "" "Output each cryptographic hash that is generated by the " "<literal>apt</literal> libraries." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:743 +#: apt.conf.5.xml:747 msgid "<literal>Debug::IdentCDROM</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:746 +#: apt.conf.5.xml:750 msgid "" "Do not include information from <literal>statfs</literal>, namely the number " "of used and free blocks on the CD-ROM filesystem, when generating an ID for " @@ -5396,92 +5402,92 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:754 +#: apt.conf.5.xml:758 msgid "<literal>Debug::NoLocking</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:757 +#: apt.conf.5.xml:761 msgid "" "Disable all file locking. For instance, this will allow two instances of " "<quote><literal>apt-get update</literal></quote> to run at the same time." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:765 +#: apt.conf.5.xml:769 msgid "<literal>Debug::pkgAcquire</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:769 +#: apt.conf.5.xml:773 msgid "Log when items are added to or removed from the global download queue." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:776 +#: apt.conf.5.xml:780 msgid "<literal>Debug::pkgAcquire::Auth</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:779 +#: apt.conf.5.xml:783 msgid "" "Output status messages and errors related to verifying checksums and " "cryptographic signatures of downloaded files." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:786 +#: apt.conf.5.xml:790 msgid "<literal>Debug::pkgAcquire::Diffs</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:789 +#: apt.conf.5.xml:793 msgid "" "Output information about downloading and applying package index list diffs, " "and errors relating to package index list diffs." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:797 +#: apt.conf.5.xml:801 msgid "<literal>Debug::pkgAcquire::RRed</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:801 +#: apt.conf.5.xml:805 msgid "" "Output information related to patching apt package lists when downloading " "index diffs instead of full indices." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:808 +#: apt.conf.5.xml:812 msgid "<literal>Debug::pkgAcquire::Worker</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:812 +#: apt.conf.5.xml:816 msgid "Log all interactions with the sub-processes that actually perform downloads." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:819 +#: apt.conf.5.xml:823 msgid "<literal>Debug::pkgAutoRemove</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:823 +#: apt.conf.5.xml:827 msgid "" "Log events related to the automatically-installed status of packages and to " "the removal of unused packages." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:830 +#: apt.conf.5.xml:834 msgid "<literal>Debug::pkgDepCache::AutoInstall</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:833 +#: apt.conf.5.xml:837 msgid "" "Generate debug messages describing which packages are being automatically " "installed to resolve dependencies. This corresponds to the initial " @@ -5491,12 +5497,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:844 +#: apt.conf.5.xml:848 msgid "<literal>Debug::pkgDepCache::Marker</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:847 +#: apt.conf.5.xml:851 msgid "" "Generate debug messages describing which package is marked as " "keep/install/remove while the ProblemResolver does his work. Each addition " @@ -5514,90 +5520,90 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:866 +#: apt.conf.5.xml:870 msgid "<literal>Debug::pkgInitConfig</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:869 +#: apt.conf.5.xml:873 msgid "Dump the default configuration to standard error on startup." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:876 +#: apt.conf.5.xml:880 msgid "<literal>Debug::pkgDPkgPM</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:879 +#: apt.conf.5.xml:883 msgid "" "When invoking &dpkg;, output the precise command line with which it is being " "invoked, with arguments separated by a single space character." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:887 +#: apt.conf.5.xml:891 msgid "<literal>Debug::pkgDPkgProgressReporting</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:890 +#: apt.conf.5.xml:894 msgid "" "Output all the data received from &dpkg; on the status file descriptor and " "any errors encountered while parsing it." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:897 +#: apt.conf.5.xml:901 msgid "<literal>Debug::pkgOrderList</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:901 +#: apt.conf.5.xml:905 msgid "" "Generate a trace of the algorithm that decides the order in which " "<literal>apt</literal> should pass packages to &dpkg;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:909 +#: apt.conf.5.xml:913 msgid "<literal>Debug::pkgPackageManager</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:913 +#: apt.conf.5.xml:917 msgid "Output status messages tracing the steps performed when invoking &dpkg;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:920 +#: apt.conf.5.xml:924 msgid "<literal>Debug::pkgPolicy</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:924 +#: apt.conf.5.xml:928 msgid "Output the priority of each package list on startup." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:930 +#: apt.conf.5.xml:934 msgid "<literal>Debug::pkgProblemResolver</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:934 +#: apt.conf.5.xml:938 msgid "" "Trace the execution of the dependency resolver (this applies only to what " "happens when a complex dependency problem is encountered)." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:942 +#: apt.conf.5.xml:946 msgid "<literal>Debug::pkgProblemResolver::ShowScores</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:945 +#: apt.conf.5.xml:949 msgid "" "Display a list of all installed packages with their calculated score used by " "the pkgProblemResolver. The description of the package is the same as " @@ -5605,32 +5611,32 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:953 +#: apt.conf.5.xml:957 msgid "<literal>Debug::sourceList</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:957 +#: apt.conf.5.xml:961 msgid "" "Print information about the vendors read from " "<filename>/etc/apt/vendors.list</filename>." msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:979 +#: apt.conf.5.xml:983 msgid "" "&configureindex; is a configuration file showing example values for all " "possible options." msgstr "" #. type: Content of: <refentry><refsect1><variablelist> -#: apt.conf.5.xml:986 +#: apt.conf.5.xml:990 msgid "&file-aptconf;" msgstr "" #. ? reading apt.conf #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:991 +#: apt.conf.5.xml:995 msgid "&apt-cache;, &apt-config;, &apt-preferences;." msgstr "" diff --git a/doc/po/fr.po b/doc/po/fr.po index b0fe59e86..a8466086b 100644 --- a/doc/po/fr.po +++ b/doc/po/fr.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" -"POT-Creation-Date: 2009-10-18 10:39+0300\n" +"POT-Creation-Date: 2009-10-19 21:56+0300\n" "PO-Revision-Date: 2009-09-26 19:25+0200\n" "Last-Translator: Christian Perrier <bubulle@debian.org>\n" "Language-Team: French <debian-l10n-french@lists.debian.org>\n" @@ -1678,7 +1678,7 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt-cache.8.xml:281 apt-config.8.xml:93 apt-extracttemplates.1.xml:56 #: apt-ftparchive.1.xml:492 apt-get.8.xml:319 apt-mark.8.xml:89 -#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:452 apt.conf.5.xml:474 +#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:456 apt.conf.5.xml:478 msgid "options" msgstr "options" @@ -1924,7 +1924,7 @@ msgstr "&apt-commonoptions;" #. type: Content of: <refentry><refsect1><title> #: apt-cache.8.xml:361 apt-get.8.xml:559 apt-key.8.xml:138 apt-mark.8.xml:122 -#: apt.conf.5.xml:984 apt_preferences.5.xml:615 +#: apt.conf.5.xml:988 apt_preferences.5.xml:615 msgid "Files" msgstr "Fichiers" @@ -1937,7 +1937,7 @@ msgstr "&file-sourceslist; &file-statelists;" #: apt-cache.8.xml:368 apt-cdrom.8.xml:155 apt-config.8.xml:103 #: apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:563 apt-get.8.xml:569 #: apt-key.8.xml:162 apt-mark.8.xml:133 apt-secure.8.xml:181 -#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:990 apt_preferences.5.xml:622 +#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:994 apt_preferences.5.xml:622 #: sources.list.5.xml:233 msgid "See Also" msgstr "Voir aussi" @@ -3524,7 +3524,7 @@ msgstr "" "configuration : <literal>APT::FTPArchive::ReadOnlyDB</literal>." #. type: Content of: <refentry><refsect1><title> -#: apt-ftparchive.1.xml:552 apt.conf.5.xml:978 apt_preferences.5.xml:462 +#: apt-ftparchive.1.xml:552 apt.conf.5.xml:982 apt_preferences.5.xml:462 #: sources.list.5.xml:193 msgid "Examples" msgstr "Exemples" @@ -5860,34 +5860,40 @@ msgid "" "Defaults to on which will cause APT to install essential and important " "packages as fast as possible in the install/upgrade operation. This is done " "to limit the effect of a failing &dpkg; call: If this option is disabled APT " -"doesn't treat an important package in the same way as an extra package: " -"Between the unpacking of the important package A and his configuration can " -"then be many other unpack or configuration calls, e.g. for package B which " -"has no relation to A, but causes the dpkg call to fail (e.g. because " -"maintainer script of package B generates an error) which results in a system " -"state in which package A is unpacked but unconfigured - each package " -"depending on A is now no longer guaranteed to work as their dependency on A " -"is not longer satisfied. The immediate configuration marker is also applied " -"to all dependencies which can generate a problem if the dependencies e.g. " -"form a circle as a dependency with the immediate flag is comparable with a " -"Pre-Dependency. So in theory it is possible that APT encounters a situation " -"in which it is unable to perform immediate configuration, error out and " -"refers to this option so the user can deactivate the immediate configuration " +"does treat an important package in the same way as an extra package: Between " +"the unpacking of the important package A and his configuration can then be " +"many other unpack or configuration calls, e.g. for package B which has no " +"relation to A, but causes the dpkg call to fail (e.g. because maintainer " +"script of package B generates an error) which results in a system state in " +"which package A is unpacked but unconfigured - each package depending on A " +"is now no longer guaranteed to work as their dependency on A is not longer " +"satisfied. The immediate configuration marker is also applied to all " +"dependencies which can generate a problem if the dependencies e.g. form a " +"circle as a dependency with the immediate flag is comparable with a Pre-" +"Dependency. So in theory it is possible that APT encounters a situation in " +"which it is unable to perform immediate configuration, error out and refers " +"to this option so the user can deactivate the immediate configuration " "temporary to be able to perform an install/upgrade again. Note the use of " "the word \"theory\" here as this problem was only encountered by now in real " "world a few times in non-stable distribution versions and caused by wrong " -"dependencies of the package in question, so you should not blindly disable " -"this option as the mentioned scenario above is not the only problem " -"immediate configuration can help to prevent in the first place." +"dependencies of the package in question or by a system in an already broken " +"state, so you should not blindly disable this option as the mentioned " +"scenario above is not the only problem immediate configuration can help to " +"prevent in the first place. Before a big operation like <literal>dist-" +"upgrade</literal> is run with this option disabled it should be tried to " +"explicitly <literal>install</literal> the package APT is unable to configure " +"immediately, but please make sure to report your problem also to your " +"distribution and to the APT team with the buglink below so they can work on " +"improving or correcting the upgrade process." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:177 +#: apt.conf.5.xml:181 msgid "Force-LoopBreak" msgstr "Force-LoopBreak" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:178 +#: apt.conf.5.xml:182 msgid "" "Never Enable this option unless you -really- know what you are doing. It " "permits APT to temporarily remove an essential package to break a Conflicts/" @@ -5905,12 +5911,12 @@ msgstr "" "ces paquets dépendent." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:186 +#: apt.conf.5.xml:190 msgid "Cache-Limit" msgstr "Cache-Limit" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:187 +#: apt.conf.5.xml:191 msgid "" "APT uses a fixed size memory mapped cache file to store the 'available' " "information. This sets the size of that cache (in bytes)." @@ -5920,24 +5926,24 @@ msgstr "" "mémoire allouée pour le chargement de ce cache." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:191 +#: apt.conf.5.xml:195 msgid "Build-Essential" msgstr "Build-Essential" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:192 +#: apt.conf.5.xml:196 msgid "Defines which package(s) are considered essential build dependencies." msgstr "" "Cette option définit les paquets qui sont considérés comme faisant partie " "des dépendances essentielles pour la construction de paquets." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:195 +#: apt.conf.5.xml:199 msgid "Get" msgstr "Get" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:196 +#: apt.conf.5.xml:200 msgid "" "The Get subsection controls the &apt-get; tool, please see its documentation " "for more information about the options here." @@ -5947,12 +5953,12 @@ msgstr "" "question." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:200 +#: apt.conf.5.xml:204 msgid "Cache" msgstr "Cache" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:201 +#: apt.conf.5.xml:205 msgid "" "The Cache subsection controls the &apt-cache; tool, please see its " "documentation for more information about the options here." @@ -5962,12 +5968,12 @@ msgstr "" "options en question." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:205 +#: apt.conf.5.xml:209 msgid "CDROM" msgstr "CDROM" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:206 +#: apt.conf.5.xml:210 msgid "" "The CDROM subsection controls the &apt-cdrom; tool, please see its " "documentation for more information about the options here." @@ -5977,17 +5983,17 @@ msgstr "" "options en question." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:212 +#: apt.conf.5.xml:216 msgid "The Acquire Group" msgstr "Le groupe Acquire" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:217 +#: apt.conf.5.xml:221 msgid "PDiffs" msgstr "PDiffs" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:218 +#: apt.conf.5.xml:222 msgid "" "Try to download deltas called <literal>PDiffs</literal> for Packages or " "Sources files instead of downloading whole ones. True by default." @@ -5997,12 +6003,12 @@ msgstr "" "télécharger entièrement. Par défaut à « true »." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:223 +#: apt.conf.5.xml:227 msgid "Queue-Mode" msgstr "Queue-Mode" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:224 +#: apt.conf.5.xml:228 msgid "" "Queuing mode; <literal>Queue-Mode</literal> can be one of <literal>host</" "literal> or <literal>access</literal> which determines how APT parallelizes " @@ -6018,12 +6024,12 @@ msgstr "" "initiée." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:231 +#: apt.conf.5.xml:235 msgid "Retries" msgstr "Retries" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:232 +#: apt.conf.5.xml:236 msgid "" "Number of retries to perform. If this is non-zero APT will retry failed " "files the given number of times." @@ -6033,12 +6039,12 @@ msgstr "" "échoué." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:236 +#: apt.conf.5.xml:240 msgid "Source-Symlinks" msgstr "Source-Symlinks" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:237 +#: apt.conf.5.xml:241 msgid "" "Use symlinks for source archives. If set to true then source archives will " "be symlinked when possible instead of copying. True is the default." @@ -6048,12 +6054,12 @@ msgstr "" "archives de sources au lieu de les copier. Par défaut à « true »." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:241 sources.list.5.xml:139 +#: apt.conf.5.xml:245 sources.list.5.xml:139 msgid "http" msgstr "http" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:242 +#: apt.conf.5.xml:246 #, fuzzy #| msgid "" #| "HTTP URIs; http::Proxy is the default http proxy to use. It is in the " @@ -6080,7 +6086,7 @@ msgstr "" "les options de mandataire HTTP." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:250 +#: apt.conf.5.xml:254 msgid "" "Three settings are provided for cache control with HTTP/1.1 compliant proxy " "caches. <literal>No-Cache</literal> tells the proxy to not use its cached " @@ -6105,7 +6111,7 @@ msgstr "" "en compte aucune de ces options." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:260 apt.conf.5.xml:317 +#: apt.conf.5.xml:264 apt.conf.5.xml:321 msgid "" "The option <literal>timeout</literal> sets the timeout timer used by the " "method, this applies to all things including connection timeout and data " @@ -6115,7 +6121,7 @@ msgstr "" "(timeout) utilisé par la méthode. Cela vaut pour tout, connexion et données." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:263 +#: apt.conf.5.xml:267 msgid "" "One setting is provided to control the pipeline depth in cases where the " "remote server is not RFC conforming or buggy (such as Squid 2.0.2) " @@ -6135,7 +6141,7 @@ msgstr "" "option ne respectent pas la RFC 2068." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:271 +#: apt.conf.5.xml:275 msgid "" "The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</" "literal> which accepts integer values in kilobyte. The default value is 0 " @@ -6145,12 +6151,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:277 +#: apt.conf.5.xml:281 msgid "https" msgstr "https" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:278 +#: apt.conf.5.xml:282 msgid "" "HTTPS URIs. Cache-control and proxy options are the same as for " "<literal>http</literal> method. <literal>Pipeline-Depth</literal> option is " @@ -6161,7 +6167,7 @@ msgstr "" "<literal>Pipeline-Depth</literal> n'est pas encore supportée." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:282 +#: apt.conf.5.xml:286 msgid "" "<literal>CaInfo</literal> suboption specifies place of file that holds info " "about trusted certificates. <literal><host>::CaInfo</literal> is " @@ -6193,12 +6199,12 @@ msgstr "" "ou 'SSLv3'." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:300 sources.list.5.xml:150 +#: apt.conf.5.xml:304 sources.list.5.xml:150 msgid "ftp" msgstr "ftp" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:301 +#: apt.conf.5.xml:305 #, fuzzy #| msgid "" #| "FTP URIs; ftp::Proxy is the default proxy server to use. It is in the " @@ -6246,7 +6252,7 @@ msgstr "" "respectif de l'URI." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:320 +#: apt.conf.5.xml:324 msgid "" "Several settings are provided to control passive mode. Generally it is safe " "to leave passive mode on, it works in nearly every environment. However " @@ -6263,7 +6269,7 @@ msgstr "" "modèle de fichier de configuration)." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:327 +#: apt.conf.5.xml:331 msgid "" "It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</" "envar> environment variable to a http url - see the discussion of the http " @@ -6278,7 +6284,7 @@ msgstr "" "de cette méthode." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:332 +#: apt.conf.5.xml:336 msgid "" "The setting <literal>ForceExtended</literal> controls the use of RFC2428 " "<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is " @@ -6294,19 +6300,19 @@ msgstr "" "des serveurs FTP ne suivent pas la RFC 2428." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:339 sources.list.5.xml:132 +#: apt.conf.5.xml:343 sources.list.5.xml:132 msgid "cdrom" msgstr "cdrom" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:345 +#: apt.conf.5.xml:349 #, fuzzy, no-wrap #| msgid "\"/cdrom/\"::Mount \"foo\";" msgid "/cdrom/::Mount \"foo\";" msgstr "\"/cdrom/\"::Mount \"foo\";" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:340 +#: apt.conf.5.xml:344 msgid "" "CDROM URIs; the only setting for CDROM URIs is the mount point, " "<literal>cdrom::Mount</literal> which must be the mount point for the CDROM " @@ -6328,12 +6334,12 @@ msgstr "" "spécifiées en utilisant <literal>UMount</literal>." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:350 +#: apt.conf.5.xml:354 msgid "gpgv" msgstr "gpgv" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:351 +#: apt.conf.5.xml:355 msgid "" "GPGV URIs; the only option for GPGV URIs is the option to pass additional " "parameters to gpgv. <literal>gpgv::Options</literal> Additional options " @@ -6344,18 +6350,18 @@ msgstr "" "supplémentaires passées à gpgv." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:356 +#: apt.conf.5.xml:360 msgid "CompressionTypes" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:362 +#: apt.conf.5.xml:366 #, no-wrap msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:357 +#: apt.conf.5.xml:361 msgid "" "List of compression types which are understood by the acquire methods. " "Files like <filename>Packages</filename> can be available in various " @@ -6367,19 +6373,19 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:367 +#: apt.conf.5.xml:371 #, no-wrap msgid "Acquire::CompressionTypes::Order:: \"gz\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:370 +#: apt.conf.5.xml:374 #, no-wrap msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:363 +#: apt.conf.5.xml:367 msgid "" "Also the <literal>Order</literal> subgroup can be used to define in which " "order the acquire system will try to download the compressed files. The " @@ -6396,13 +6402,13 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:374 +#: apt.conf.5.xml:378 #, no-wrap msgid "Dir::Bin::bzip2 \"/bin/bzip2\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:372 +#: apt.conf.5.xml:376 msgid "" "Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</" "replaceable></literal> will be checked: If this setting exists the method " @@ -6417,7 +6423,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:379 +#: apt.conf.5.xml:383 msgid "" "While it is possible to add an empty compression type to the order list, but " "APT in its current version doesn't understand it correctly and will display " @@ -6427,7 +6433,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:213 +#: apt.conf.5.xml:217 msgid "" "The <literal>Acquire</literal> group of options controls the download of " "packages and the URI handlers. <placeholder type=\"variablelist\" id=\"0\"/>" @@ -6437,12 +6443,12 @@ msgstr "" "id=\"0\"/>" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:388 +#: apt.conf.5.xml:392 msgid "Directories" msgstr "Les répertoires" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:390 +#: apt.conf.5.xml:394 msgid "" "The <literal>Dir::State</literal> section has directories that pertain to " "local state information. <literal>lists</literal> is the directory to place " @@ -6462,7 +6468,7 @@ msgstr "" "filename>." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:397 +#: apt.conf.5.xml:401 msgid "" "<literal>Dir::Cache</literal> contains locations pertaining to local cache " "information, such as the two package caches <literal>srcpkgcache</literal> " @@ -6485,7 +6491,7 @@ msgstr "" "literal>." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:406 +#: apt.conf.5.xml:410 msgid "" "<literal>Dir::Etc</literal> contains the location of configuration files, " "<literal>sourcelist</literal> gives the location of the sourcelist and " @@ -6500,7 +6506,7 @@ msgstr "" "fichier de configuration indiqué par la variable <envar>APT_CONFIG</envar>)." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:412 +#: apt.conf.5.xml:416 msgid "" "The <literal>Dir::Parts</literal> setting reads in all the config fragments " "in lexical order from the directory specified. After this is done then the " @@ -6511,7 +6517,7 @@ msgstr "" "configuration est chargé." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:416 +#: apt.conf.5.xml:420 #, fuzzy #| msgid "" #| "Binary programs are pointed to by <literal>Dir::Bin</literal>. " @@ -6536,7 +6542,7 @@ msgstr "" "l'emplacement des programmes correspondants." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:424 +#: apt.conf.5.xml:428 msgid "" "The configuration item <literal>RootDir</literal> has a special meaning. If " "set, all paths in <literal>Dir::</literal> will be relative to " @@ -6558,12 +6564,12 @@ msgstr "" "staging/var/lib/dpkg/status</filename>." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:437 +#: apt.conf.5.xml:441 msgid "APT in DSelect" msgstr "APT et DSelect" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:439 +#: apt.conf.5.xml:443 msgid "" "When APT is used as a &dselect; method several configuration directives " "control the default behaviour. These are in the <literal>DSelect</literal> " @@ -6574,12 +6580,12 @@ msgstr "" "<literal>DSelect</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:443 +#: apt.conf.5.xml:447 msgid "Clean" msgstr "Clean" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:444 +#: apt.conf.5.xml:448 msgid "" "Cache Clean mode; this value may be one of always, prompt, auto, pre-auto " "and never. always and prompt will remove all packages from the cache after " @@ -6597,7 +6603,7 @@ msgstr "" "supprime avant de récupérer de nouveaux paquets." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:453 +#: apt.conf.5.xml:457 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the install phase." @@ -6606,12 +6612,12 @@ msgstr "" "&apt-get; lors de la phase d'installation." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:457 +#: apt.conf.5.xml:461 msgid "Updateoptions" msgstr "UpdateOptions" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:458 +#: apt.conf.5.xml:462 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the update phase." @@ -6620,12 +6626,12 @@ msgstr "" "&apt-get; lors de la phase de mise à jour." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:462 +#: apt.conf.5.xml:466 msgid "PromptAfterUpdate" msgstr "PromptAfterUpdate" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:463 +#: apt.conf.5.xml:467 msgid "" "If true the [U]pdate operation in &dselect; will always prompt to continue. " "The default is to prompt only on error." @@ -6635,12 +6641,12 @@ msgstr "" "d'erreur que l'on propose à l'utilisateur d'intervenir." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:469 +#: apt.conf.5.xml:473 msgid "How APT calls dpkg" msgstr "Méthode d'appel de &dpkg; par APT" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:470 +#: apt.conf.5.xml:474 msgid "" "Several configuration directives control how APT invokes &dpkg;. These are " "in the <literal>DPkg</literal> section." @@ -6649,7 +6655,7 @@ msgstr "" "&dpkg; : elles figurent dans la section <literal>DPkg</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:475 +#: apt.conf.5.xml:479 msgid "" "This is a list of options to pass to dpkg. The options must be specified " "using the list notation and each list item is passed as a single argument to " @@ -6660,17 +6666,17 @@ msgstr "" "est passé comme un seul paramètre à &dpkg;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:480 +#: apt.conf.5.xml:484 msgid "Pre-Invoke" msgstr "Pre-Invoke" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:480 +#: apt.conf.5.xml:484 msgid "Post-Invoke" msgstr "Post-Invoke" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:481 +#: apt.conf.5.xml:485 msgid "" "This is a list of shell commands to run before/after invoking &dpkg;. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -6683,12 +6689,12 @@ msgstr "" "<filename>/bin/sh</filename> : APT s'arrête dès que l'une d'elles échoue." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:487 +#: apt.conf.5.xml:491 msgid "Pre-Install-Pkgs" msgstr "Pre-Install-Pkgs" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:488 +#: apt.conf.5.xml:492 msgid "" "This is a list of shell commands to run before invoking dpkg. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -6704,7 +6710,7 @@ msgstr "" "qu'il va installer, à raison d'un par ligne." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:494 +#: apt.conf.5.xml:498 msgid "" "Version 2 of this protocol dumps more information, including the protocol " "version, the APT configuration space and the packages, files and versions " @@ -6720,12 +6726,12 @@ msgstr "" "literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:501 +#: apt.conf.5.xml:505 msgid "Run-Directory" msgstr "Run-Directory" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:502 +#: apt.conf.5.xml:506 msgid "" "APT chdirs to this directory before invoking dpkg, the default is <filename>/" "</filename>." @@ -6734,12 +6740,12 @@ msgstr "" "le répertoire <filename>/</filename>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:506 +#: apt.conf.5.xml:510 msgid "Build-options" msgstr "Build-options" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:507 +#: apt.conf.5.xml:511 msgid "" "These options are passed to &dpkg-buildpackage; when compiling packages, the " "default is to disable signing and produce all binaries." @@ -6749,12 +6755,12 @@ msgstr "" "créés." #. type: Content of: <refentry><refsect1><refsect2><title> -#: apt.conf.5.xml:512 +#: apt.conf.5.xml:516 msgid "dpkg trigger usage (and related options)" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:513 +#: apt.conf.5.xml:517 msgid "" "APT can call dpkg in a way so it can make aggressive use of triggers over " "multiply calls of dpkg. Without further options dpkg will use triggers only " @@ -6769,7 +6775,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para><literallayout> -#: apt.conf.5.xml:528 +#: apt.conf.5.xml:532 #, no-wrap msgid "" "DPkg::NoTriggers \"true\";\n" @@ -6779,7 +6785,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:522 +#: apt.conf.5.xml:526 msgid "" "Note that it is not guaranteed that APT will support these options or that " "these options will not cause (big) trouble in the future. If you have " @@ -6793,12 +6799,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:534 +#: apt.conf.5.xml:538 msgid "DPkg::NoTriggers" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:535 +#: apt.conf.5.xml:539 msgid "" "Add the no triggers flag to all dpkg calls (expect the ConfigurePending " "call). See &dpkg; if you are interested in what this actually means. In " @@ -6810,14 +6816,14 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:542 +#: apt.conf.5.xml:546 #, fuzzy #| msgid "Packages::Compress" msgid "PackageManager::Configure" msgstr "Packages::Compress" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:543 +#: apt.conf.5.xml:547 msgid "" "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " "and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default " @@ -6833,12 +6839,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:553 +#: apt.conf.5.xml:557 msgid "DPkg::ConfigurePending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:554 +#: apt.conf.5.xml:558 msgid "" "If this option is set apt will call <command>dpkg --configure --pending</" "command> to let dpkg handle all required configurations and triggers. This " @@ -6849,12 +6855,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:560 +#: apt.conf.5.xml:564 msgid "DPkg::TriggersPending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:561 +#: apt.conf.5.xml:565 msgid "" "Useful for <literal>smart</literal> configuration as a package which has " "pending triggers is not considered as <literal>installed</literal> and dpkg " @@ -6864,12 +6870,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:566 +#: apt.conf.5.xml:570 msgid "PackageManager::UnpackAll" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:567 +#: apt.conf.5.xml:571 msgid "" "As the configuration can be deferred to be done at the end by dpkg it can be " "tried to order the unpack series only by critical needs, e.g. by Pre-" @@ -6881,12 +6887,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:574 +#: apt.conf.5.xml:578 msgid "OrderList::Score::Immediate" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:582 +#: apt.conf.5.xml:586 #, no-wrap msgid "" "OrderList::Score {\n" @@ -6898,7 +6904,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:575 +#: apt.conf.5.xml:579 msgid "" "Essential packages (and there dependencies) should be configured immediately " "after unpacking. It will be a good idea to do this quite early in the " @@ -6912,12 +6918,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:595 +#: apt.conf.5.xml:599 msgid "Periodic and Archives options" msgstr "Options « Periodic » et « Archive »" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:596 +#: apt.conf.5.xml:600 msgid "" "<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups " "of options configure behavior of apt periodic updates, which is done by " @@ -6929,12 +6935,12 @@ msgstr "" "script <literal>/etc/cron.daily/apt</literal>, lancé quotidiennement." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:604 +#: apt.conf.5.xml:608 msgid "Debug options" msgstr "Les options de débogage" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:606 +#: apt.conf.5.xml:610 msgid "" "Enabling options in the <literal>Debug::</literal> section will cause " "debugging information to be sent to the standard error stream of the program " @@ -6952,7 +6958,7 @@ msgstr "" "peuvent tout de même être utiles :" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:617 +#: apt.conf.5.xml:621 msgid "" "<literal>Debug::pkgProblemResolver</literal> enables output about the " "decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</" @@ -6963,7 +6969,7 @@ msgstr "" "upgrade, upgrade, install, remove et purge</literal>." #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:625 +#: apt.conf.5.xml:629 msgid "" "<literal>Debug::NoLocking</literal> disables all file locking. This can be " "used to run some operations (for instance, <literal>apt-get -s install</" @@ -6975,7 +6981,7 @@ msgstr "" "superutilisateur." #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:634 +#: apt.conf.5.xml:638 msgid "" "<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each " "time that <literal>apt</literal> invokes &dpkg;." @@ -6987,7 +6993,7 @@ msgstr "" #. motivating example, except I haven't a clue why you'd want #. to do this. #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:642 +#: apt.conf.5.xml:646 msgid "" "<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data " "in CDROM IDs." @@ -6996,17 +7002,17 @@ msgstr "" "type statfs dans les identifiants de CD." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:652 +#: apt.conf.5.xml:656 msgid "A full list of debugging options to apt follows." msgstr "Liste complète des options de débogage de APT :" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:657 +#: apt.conf.5.xml:661 msgid "<literal>Debug::Acquire::cdrom</literal>" msgstr "<literal>Debug::Acquire::cdrom</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:661 +#: apt.conf.5.xml:665 msgid "" "Print information related to accessing <literal>cdrom://</literal> sources." msgstr "" @@ -7014,44 +7020,44 @@ msgstr "" "literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:668 +#: apt.conf.5.xml:672 msgid "<literal>Debug::Acquire::ftp</literal>" msgstr "<literal>Debug::Acquire::ftp</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:672 +#: apt.conf.5.xml:676 msgid "Print information related to downloading packages using FTP." msgstr "" "Affiche les informations concernant le téléchargement de paquets par FTP." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:679 +#: apt.conf.5.xml:683 msgid "<literal>Debug::Acquire::http</literal>" msgstr "<literal>Debug::Acquire::http</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:683 +#: apt.conf.5.xml:687 msgid "Print information related to downloading packages using HTTP." msgstr "" "Affiche les informations concernant le téléchargement de paquets par HTTP." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:690 +#: apt.conf.5.xml:694 msgid "<literal>Debug::Acquire::https</literal>" msgstr "<literal>Debug::Acquire::https</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:694 +#: apt.conf.5.xml:698 msgid "Print information related to downloading packages using HTTPS." msgstr "Print information related to downloading packages using HTTPS." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:701 +#: apt.conf.5.xml:705 msgid "<literal>Debug::Acquire::gpgv</literal>" msgstr "<literal>Debug::Acquire::gpgv</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:705 +#: apt.conf.5.xml:709 msgid "" "Print information related to verifying cryptographic signatures using " "<literal>gpg</literal>." @@ -7060,12 +7066,12 @@ msgstr "" "cryptographiques avec <literal>gpg</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:712 +#: apt.conf.5.xml:716 msgid "<literal>Debug::aptcdrom</literal>" msgstr "<literal>Debug::aptcdrom</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:716 +#: apt.conf.5.xml:720 msgid "" "Output information about the process of accessing collections of packages " "stored on CD-ROMs." @@ -7074,24 +7080,24 @@ msgstr "" "stockées sur CD." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:723 +#: apt.conf.5.xml:727 msgid "<literal>Debug::BuildDeps</literal>" msgstr "<literal>Debug::BuildDeps</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:726 +#: apt.conf.5.xml:730 msgid "Describes the process of resolving build-dependencies in &apt-get;." msgstr "" "Décrit le processus de résolution des dépendances pour la construction de " "paquets source ( « build-dependencies » ) par &apt-get;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:733 +#: apt.conf.5.xml:737 msgid "<literal>Debug::Hashes</literal>" msgstr "<literal>Debug::Hashes</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:736 +#: apt.conf.5.xml:740 msgid "" "Output each cryptographic hash that is generated by the <literal>apt</" "literal> libraries." @@ -7100,12 +7106,12 @@ msgstr "" "librairies d'<literal>apt</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:743 +#: apt.conf.5.xml:747 msgid "<literal>Debug::IdentCDROM</literal>" msgstr "<literal>Debug::IdentCDROM</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:746 +#: apt.conf.5.xml:750 msgid "" "Do not include information from <literal>statfs</literal>, namely the number " "of used and free blocks on the CD-ROM filesystem, when generating an ID for " @@ -7116,12 +7122,12 @@ msgstr "" "utilisés sur le système de fichier du CD." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:754 +#: apt.conf.5.xml:758 msgid "<literal>Debug::NoLocking</literal>" msgstr "<literal>Debug::NoLocking</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:757 +#: apt.conf.5.xml:761 msgid "" "Disable all file locking. For instance, this will allow two instances of " "<quote><literal>apt-get update</literal></quote> to run at the same time." @@ -7131,24 +7137,24 @@ msgstr "" "temps." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:765 +#: apt.conf.5.xml:769 msgid "<literal>Debug::pkgAcquire</literal>" msgstr "<literal>Debug::pkgAcquire</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:769 +#: apt.conf.5.xml:773 msgid "Log when items are added to or removed from the global download queue." msgstr "" "Trace les ajouts et suppressions d'éléments de la queue globale de " "téléchargement." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:776 +#: apt.conf.5.xml:780 msgid "<literal>Debug::pkgAcquire::Auth</literal>" msgstr "<literal>Debug::pkgAcquire::Auth</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:779 +#: apt.conf.5.xml:783 msgid "" "Output status messages and errors related to verifying checksums and " "cryptographic signatures of downloaded files." @@ -7158,12 +7164,12 @@ msgstr "" "éventuelles." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:786 +#: apt.conf.5.xml:790 msgid "<literal>Debug::pkgAcquire::Diffs</literal>" msgstr "<literal>Debug::pkgAcquire::Diffs</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:789 +#: apt.conf.5.xml:793 msgid "" "Output information about downloading and applying package index list diffs, " "and errors relating to package index list diffs." @@ -7173,12 +7179,12 @@ msgstr "" "éventuelles." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:797 +#: apt.conf.5.xml:801 msgid "<literal>Debug::pkgAcquire::RRed</literal>" msgstr "<literal>Debug::pkgAcquire::RRed</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:801 +#: apt.conf.5.xml:805 msgid "" "Output information related to patching apt package lists when downloading " "index diffs instead of full indices." @@ -7188,12 +7194,12 @@ msgstr "" "place des fichiers complets." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:808 +#: apt.conf.5.xml:812 msgid "<literal>Debug::pkgAcquire::Worker</literal>" msgstr "<literal>Debug::pkgAcquire::Worker</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:812 +#: apt.conf.5.xml:816 msgid "" "Log all interactions with the sub-processes that actually perform downloads." msgstr "" @@ -7201,12 +7207,12 @@ msgstr "" "effectivement des téléchargements." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:819 +#: apt.conf.5.xml:823 msgid "<literal>Debug::pkgAutoRemove</literal>" msgstr "<literal>Debug::pkgAutoRemove</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:823 +#: apt.conf.5.xml:827 msgid "" "Log events related to the automatically-installed status of packages and to " "the removal of unused packages." @@ -7215,12 +7221,12 @@ msgstr "" "automatiquement, et la suppression des paquets inutiles." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:830 +#: apt.conf.5.xml:834 msgid "<literal>Debug::pkgDepCache::AutoInstall</literal>" msgstr "<literal>Debug::pkgDepCache::AutoInstall</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:833 +#: apt.conf.5.xml:837 msgid "" "Generate debug messages describing which packages are being automatically " "installed to resolve dependencies. This corresponds to the initial auto-" @@ -7235,12 +7241,12 @@ msgstr "" "de APT ; voir <literal>Debug::pkgProblemResolver</literal> pour ce dernier." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:844 +#: apt.conf.5.xml:848 msgid "<literal>Debug::pkgDepCache::Marker</literal>" msgstr "<literal>Debug::pkgDepCache::Marker</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:847 +#: apt.conf.5.xml:851 msgid "" "Generate debug messages describing which package is marked as keep/install/" "remove while the ProblemResolver does his work. Each addition or deletion " @@ -7275,24 +7281,24 @@ msgstr "" "de APT ; voir <literal>Debug::pkgProblemResolver</literal> pour ce dernier." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:866 +#: apt.conf.5.xml:870 msgid "<literal>Debug::pkgInitConfig</literal>" msgstr "<literal>Debug::pkgInitConfig</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:869 +#: apt.conf.5.xml:873 msgid "Dump the default configuration to standard error on startup." msgstr "" "Affiche, au lancement, l'ensemble de la configuration sur la sortie d'erreur " "standard." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:876 +#: apt.conf.5.xml:880 msgid "<literal>Debug::pkgDPkgPM</literal>" msgstr "<literal>Debug::pkgDPkgPM</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:879 +#: apt.conf.5.xml:883 msgid "" "When invoking &dpkg;, output the precise command line with which it is being " "invoked, with arguments separated by a single space character." @@ -7301,12 +7307,12 @@ msgstr "" "paramètres sont séparés par des espaces." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:887 +#: apt.conf.5.xml:891 msgid "<literal>Debug::pkgDPkgProgressReporting</literal>" msgstr "<literal>Debug::pkgDPkgProgressReporting</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:890 +#: apt.conf.5.xml:894 msgid "" "Output all the data received from &dpkg; on the status file descriptor and " "any errors encountered while parsing it." @@ -7316,12 +7322,12 @@ msgstr "" "fichier." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:897 +#: apt.conf.5.xml:901 msgid "<literal>Debug::pkgOrderList</literal>" msgstr "<literal>Debug::pkgOrderList</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:901 +#: apt.conf.5.xml:905 msgid "" "Generate a trace of the algorithm that decides the order in which " "<literal>apt</literal> should pass packages to &dpkg;." @@ -7330,33 +7336,33 @@ msgstr "" "<literal>apt</literal> passe les paquets à &dpkg;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:909 +#: apt.conf.5.xml:913 msgid "<literal>Debug::pkgPackageManager</literal>" msgstr "<literal>Debug::pkgPackageManager</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:913 +#: apt.conf.5.xml:917 msgid "" "Output status messages tracing the steps performed when invoking &dpkg;." msgstr "Affiche le détail des opérations liées à l'invocation de &dpkg;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:920 +#: apt.conf.5.xml:924 msgid "<literal>Debug::pkgPolicy</literal>" msgstr "<literal>Debug::pkgPolicy</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:924 +#: apt.conf.5.xml:928 msgid "Output the priority of each package list on startup." msgstr "Affiche, au lancement, la priorité de chaque liste de paquets." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:930 +#: apt.conf.5.xml:934 msgid "<literal>Debug::pkgProblemResolver</literal>" msgstr "<literal>Debug::pkgProblemResolver</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:934 +#: apt.conf.5.xml:938 msgid "" "Trace the execution of the dependency resolver (this applies only to what " "happens when a complex dependency problem is encountered)." @@ -7365,12 +7371,12 @@ msgstr "" "concerne que les cas où un problème de dépendances complexe se présente)." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:942 +#: apt.conf.5.xml:946 msgid "<literal>Debug::pkgProblemResolver::ShowScores</literal>" msgstr "<literal>Debug::pkgProblemResolver::ShowScores</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:945 +#: apt.conf.5.xml:949 msgid "" "Display a list of all installed packages with their calculated score used by " "the pkgProblemResolver. The description of the package is the same as " @@ -7381,12 +7387,12 @@ msgstr "" "est décrite dans <literal>Debug::pkgDepCache::Marker</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:953 +#: apt.conf.5.xml:957 msgid "<literal>Debug::sourceList</literal>" msgstr "<literal>Debug::sourceList</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:957 +#: apt.conf.5.xml:961 msgid "" "Print information about the vendors read from <filename>/etc/apt/vendors." "list</filename>." @@ -7395,7 +7401,7 @@ msgstr "" "list</filename>." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:979 +#: apt.conf.5.xml:983 msgid "" "&configureindex; is a configuration file showing example values for all " "possible options." @@ -7404,7 +7410,7 @@ msgstr "" "exemples pour toutes les options existantes." #. type: Content of: <refentry><refsect1><variablelist> -#: apt.conf.5.xml:986 +#: apt.conf.5.xml:990 #, fuzzy #| msgid "&apt-conf;" msgid "&file-aptconf;" @@ -7412,7 +7418,7 @@ msgstr "&apt-conf;" #. ? reading apt.conf #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:991 +#: apt.conf.5.xml:995 msgid "&apt-cache;, &apt-config;, &apt-preferences;." msgstr "&apt-cache;, &apt-config;, &apt-preferences;." diff --git a/doc/po/ja.po b/doc/po/ja.po index c51567453..060bc9529 100644 --- a/doc/po/ja.po +++ b/doc/po/ja.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2009-10-18 10:39+0300\n" +"POT-Creation-Date: 2009-10-19 21:56+0300\n" "PO-Revision-Date: 2009-07-30 22:55+0900\n" "Last-Translator: KURASAWA Nozomu <nabetaro@caldron.jp>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -1693,7 +1693,7 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt-cache.8.xml:281 apt-config.8.xml:93 apt-extracttemplates.1.xml:56 #: apt-ftparchive.1.xml:492 apt-get.8.xml:319 apt-mark.8.xml:89 -#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:452 apt.conf.5.xml:474 +#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:456 apt.conf.5.xml:478 msgid "options" msgstr "オプション" @@ -1943,7 +1943,7 @@ msgstr "&apt-commonoptions;" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> #: apt-cache.8.xml:361 apt-get.8.xml:559 apt-key.8.xml:138 apt-mark.8.xml:122 -#: apt.conf.5.xml:984 apt_preferences.5.xml:615 +#: apt.conf.5.xml:988 apt_preferences.5.xml:615 msgid "Files" msgstr "ファイル" @@ -1957,7 +1957,7 @@ msgstr "" #: apt-cache.8.xml:368 apt-cdrom.8.xml:155 apt-config.8.xml:103 #: apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:563 apt-get.8.xml:569 #: apt-key.8.xml:162 apt-mark.8.xml:133 apt-secure.8.xml:181 -#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:990 apt_preferences.5.xml:622 +#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:994 apt_preferences.5.xml:622 #: sources.list.5.xml:233 msgid "See Also" msgstr "関連項目" @@ -3665,7 +3665,7 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt-ftparchive.1.xml:552 apt.conf.5.xml:978 apt_preferences.5.xml:462 +#: apt-ftparchive.1.xml:552 apt.conf.5.xml:982 apt_preferences.5.xml:462 #: sources.list.5.xml:193 msgid "Examples" msgstr "サンプル" @@ -6084,35 +6084,41 @@ msgid "" "Defaults to on which will cause APT to install essential and important " "packages as fast as possible in the install/upgrade operation. This is done " "to limit the effect of a failing &dpkg; call: If this option is disabled APT " -"doesn't treat an important package in the same way as an extra package: " -"Between the unpacking of the important package A and his configuration can " -"then be many other unpack or configuration calls, e.g. for package B which " -"has no relation to A, but causes the dpkg call to fail (e.g. because " -"maintainer script of package B generates an error) which results in a system " -"state in which package A is unpacked but unconfigured - each package " -"depending on A is now no longer guaranteed to work as their dependency on A " -"is not longer satisfied. The immediate configuration marker is also applied " -"to all dependencies which can generate a problem if the dependencies e.g. " -"form a circle as a dependency with the immediate flag is comparable with a " -"Pre-Dependency. So in theory it is possible that APT encounters a situation " -"in which it is unable to perform immediate configuration, error out and " -"refers to this option so the user can deactivate the immediate configuration " +"does treat an important package in the same way as an extra package: Between " +"the unpacking of the important package A and his configuration can then be " +"many other unpack or configuration calls, e.g. for package B which has no " +"relation to A, but causes the dpkg call to fail (e.g. because maintainer " +"script of package B generates an error) which results in a system state in " +"which package A is unpacked but unconfigured - each package depending on A " +"is now no longer guaranteed to work as their dependency on A is not longer " +"satisfied. The immediate configuration marker is also applied to all " +"dependencies which can generate a problem if the dependencies e.g. form a " +"circle as a dependency with the immediate flag is comparable with a Pre-" +"Dependency. So in theory it is possible that APT encounters a situation in " +"which it is unable to perform immediate configuration, error out and refers " +"to this option so the user can deactivate the immediate configuration " "temporary to be able to perform an install/upgrade again. Note the use of " "the word \"theory\" here as this problem was only encountered by now in real " "world a few times in non-stable distribution versions and caused by wrong " -"dependencies of the package in question, so you should not blindly disable " -"this option as the mentioned scenario above is not the only problem " -"immediate configuration can help to prevent in the first place." +"dependencies of the package in question or by a system in an already broken " +"state, so you should not blindly disable this option as the mentioned " +"scenario above is not the only problem immediate configuration can help to " +"prevent in the first place. Before a big operation like <literal>dist-" +"upgrade</literal> is run with this option disabled it should be tried to " +"explicitly <literal>install</literal> the package APT is unable to configure " +"immediately, but please make sure to report your problem also to your " +"distribution and to the APT team with the buglink below so they can work on " +"improving or correcting the upgrade process." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:177 +#: apt.conf.5.xml:181 msgid "Force-LoopBreak" msgstr "Force-LoopBreak" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:178 +#: apt.conf.5.xml:182 msgid "" "Never Enable this option unless you -really- know what you are doing. It " "permits APT to temporarily remove an essential package to break a Conflicts/" @@ -6130,13 +6136,13 @@ msgstr "" "ä¸å¯æ¬ ãƒ‘ッケージã§å‹•ä½œã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:186 +#: apt.conf.5.xml:190 msgid "Cache-Limit" msgstr "Cache-Limit" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:187 +#: apt.conf.5.xml:191 msgid "" "APT uses a fixed size memory mapped cache file to store the 'available' " "information. This sets the size of that cache (in bytes)." @@ -6145,24 +6151,24 @@ msgstr "" "ファイルを使用ã—ã¾ã™ã€‚ã“ã®ã‚ªãƒ—ションã¯ã€ãã®ã‚­ãƒ£ãƒƒã‚·ãƒ¥ã‚µã‚¤ã‚ºã‚’指定ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:191 +#: apt.conf.5.xml:195 msgid "Build-Essential" msgstr "Build-Essential" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:192 +#: apt.conf.5.xml:196 msgid "Defines which package(s) are considered essential build dependencies." msgstr "構築ä¾å­˜é–¢ä¿‚ã§ä¸å¯æ¬ ãªãƒ‘ッケージを定義ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:195 +#: apt.conf.5.xml:199 msgid "Get" msgstr "Get" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:196 +#: apt.conf.5.xml:200 msgid "" "The Get subsection controls the &apt-get; tool, please see its documentation " "for more information about the options here." @@ -6171,13 +6177,13 @@ msgstr "" "&apt-get; ã®æ–‡æ›¸ã‚’å‚ç…§ã—ã¦ãã ã•ã„。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:200 +#: apt.conf.5.xml:204 msgid "Cache" msgstr "Cache" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:201 +#: apt.conf.5.xml:205 msgid "" "The Cache subsection controls the &apt-cache; tool, please see its " "documentation for more information about the options here." @@ -6186,13 +6192,13 @@ msgstr "" "㯠&apt-cache; ã®æ–‡æ›¸ã‚’å‚ç…§ã—ã¦ãã ã•ã„。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:205 +#: apt.conf.5.xml:209 msgid "CDROM" msgstr "CDROM" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:206 +#: apt.conf.5.xml:210 msgid "" "The CDROM subsection controls the &apt-cdrom; tool, please see its " "documentation for more information about the options here." @@ -6202,17 +6208,17 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:212 +#: apt.conf.5.xml:216 msgid "The Acquire Group" msgstr "Acquire グループ" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:217 +#: apt.conf.5.xml:221 msgid "PDiffs" msgstr "PDiffs" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:218 +#: apt.conf.5.xml:222 msgid "" "Try to download deltas called <literal>PDiffs</literal> for Packages or " "Sources files instead of downloading whole ones. True by default." @@ -6222,13 +6228,13 @@ msgstr "" "ルトã§ã¯ True ã§ã™ã€‚" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:223 +#: apt.conf.5.xml:227 msgid "Queue-Mode" msgstr "Queue-Mode" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:224 +#: apt.conf.5.xml:228 msgid "" "Queuing mode; <literal>Queue-Mode</literal> can be one of <literal>host</" "literal> or <literal>access</literal> which determines how APT parallelizes " @@ -6243,13 +6249,13 @@ msgstr "" # type: Content of: <refentry><refsect1><refsect2><title> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:231 +#: apt.conf.5.xml:235 msgid "Retries" msgstr "Retries" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:232 +#: apt.conf.5.xml:236 msgid "" "Number of retries to perform. If this is non-zero APT will retry failed " "files the given number of times." @@ -6258,13 +6264,13 @@ msgstr "" "ãˆã‚‰ã‚ŒãŸå›žæ•°ã ã‘リトライを行ã„ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:236 +#: apt.conf.5.xml:240 msgid "Source-Symlinks" msgstr "Source-Symlinks" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:237 +#: apt.conf.5.xml:241 msgid "" "Use symlinks for source archives. If set to true then source archives will " "be symlinked when possible instead of copying. True is the default." @@ -6275,13 +6281,13 @@ msgstr "" # type: <tag></tag> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:241 sources.list.5.xml:139 +#: apt.conf.5.xml:245 sources.list.5.xml:139 msgid "http" msgstr "http" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:242 +#: apt.conf.5.xml:246 #, fuzzy #| msgid "" #| "HTTP URIs; http::Proxy is the default http proxy to use. It is in the " @@ -6307,7 +6313,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:250 +#: apt.conf.5.xml:254 msgid "" "Three settings are provided for cache control with HTTP/1.1 compliant proxy " "caches. <literal>No-Cache</literal> tells the proxy to not use its cached " @@ -6332,7 +6338,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:260 apt.conf.5.xml:317 +#: apt.conf.5.xml:264 apt.conf.5.xml:321 msgid "" "The option <literal>timeout</literal> sets the timeout timer used by the " "method, this applies to all things including connection timeout and data " @@ -6344,7 +6350,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:263 +#: apt.conf.5.xml:267 msgid "" "One setting is provided to control the pipeline depth in cases where the " "remote server is not RFC conforming or buggy (such as Squid 2.0.2) " @@ -6363,7 +6369,7 @@ msgstr "" "ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:271 +#: apt.conf.5.xml:275 msgid "" "The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</" "literal> which accepts integer values in kilobyte. The default value is 0 " @@ -6374,12 +6380,12 @@ msgstr "" # type: <tag></tag> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:277 +#: apt.conf.5.xml:281 msgid "https" msgstr "https" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:278 +#: apt.conf.5.xml:282 msgid "" "HTTPS URIs. Cache-control and proxy options are the same as for " "<literal>http</literal> method. <literal>Pipeline-Depth</literal> option is " @@ -6390,7 +6396,7 @@ msgstr "" "ã—ã¦ã„ã¾ã›ã‚“。" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:282 +#: apt.conf.5.xml:286 msgid "" "<literal>CaInfo</literal> suboption specifies place of file that holds info " "about trusted certificates. <literal><host>::CaInfo</literal> is " @@ -6412,13 +6418,13 @@ msgstr "" # type: <tag></tag> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:300 sources.list.5.xml:150 +#: apt.conf.5.xml:304 sources.list.5.xml:150 msgid "ftp" msgstr "ftp" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:301 +#: apt.conf.5.xml:305 #, fuzzy #| msgid "" #| "FTP URIs; ftp::Proxy is the default proxy server to use. It is in the " @@ -6461,7 +6467,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:320 +#: apt.conf.5.xml:324 msgid "" "Several settings are provided to control passive mode. Generally it is safe " "to leave passive mode on, it works in nearly every environment. However " @@ -6477,7 +6483,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:327 +#: apt.conf.5.xml:331 msgid "" "It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</" "envar> environment variable to a http url - see the discussion of the http " @@ -6491,7 +6497,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:332 +#: apt.conf.5.xml:336 msgid "" "The setting <literal>ForceExtended</literal> controls the use of RFC2428 " "<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is " @@ -6508,12 +6514,12 @@ msgstr "" # type: Content of: <refentry><refnamediv><refname> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:339 sources.list.5.xml:132 +#: apt.conf.5.xml:343 sources.list.5.xml:132 msgid "cdrom" msgstr "cdrom" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:345 +#: apt.conf.5.xml:349 #, fuzzy, no-wrap #| msgid "\"/cdrom/\"::Mount \"foo\";" msgid "/cdrom/::Mount \"foo\";" @@ -6521,7 +6527,7 @@ msgstr "\"/cdrom/\"::Mount \"foo\";" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:340 +#: apt.conf.5.xml:344 msgid "" "CDROM URIs; the only setting for CDROM URIs is the mount point, " "<literal>cdrom::Mount</literal> which must be the mount point for the CDROM " @@ -6542,13 +6548,13 @@ msgstr "" "ã™ã€‚" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:350 +#: apt.conf.5.xml:354 msgid "gpgv" msgstr "gpgv" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:351 +#: apt.conf.5.xml:355 msgid "" "GPGV URIs; the only option for GPGV URIs is the option to pass additional " "parameters to gpgv. <literal>gpgv::Options</literal> Additional options " @@ -6559,18 +6565,18 @@ msgstr "" "ã™ã€‚" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:356 +#: apt.conf.5.xml:360 msgid "CompressionTypes" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:362 +#: apt.conf.5.xml:366 #, no-wrap msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:357 +#: apt.conf.5.xml:361 msgid "" "List of compression types which are understood by the acquire methods. " "Files like <filename>Packages</filename> can be available in various " @@ -6582,19 +6588,19 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:367 +#: apt.conf.5.xml:371 #, no-wrap msgid "Acquire::CompressionTypes::Order:: \"gz\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:370 +#: apt.conf.5.xml:374 #, no-wrap msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:363 +#: apt.conf.5.xml:367 msgid "" "Also the <literal>Order</literal> subgroup can be used to define in which " "order the acquire system will try to download the compressed files. The " @@ -6611,13 +6617,13 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:374 +#: apt.conf.5.xml:378 #, no-wrap msgid "Dir::Bin::bzip2 \"/bin/bzip2\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:372 +#: apt.conf.5.xml:376 msgid "" "Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</" "replaceable></literal> will be checked: If this setting exists the method " @@ -6632,7 +6638,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:379 +#: apt.conf.5.xml:383 msgid "" "While it is possible to add an empty compression type to the order list, but " "APT in its current version doesn't understand it correctly and will display " @@ -6643,7 +6649,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:213 +#: apt.conf.5.xml:217 msgid "" "The <literal>Acquire</literal> group of options controls the download of " "packages and the URI handlers. <placeholder type=\"variablelist\" id=\"0\"/>" @@ -6654,13 +6660,13 @@ msgstr "" # type: Content of: <refentry><refsect1><refsect2><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:388 +#: apt.conf.5.xml:392 msgid "Directories" msgstr "ディレクトリ" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:390 +#: apt.conf.5.xml:394 msgid "" "The <literal>Dir::State</literal> section has directories that pertain to " "local state information. <literal>lists</literal> is the directory to place " @@ -6680,7 +6686,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:397 +#: apt.conf.5.xml:401 msgid "" "<literal>Dir::Cache</literal> contains locations pertaining to local cache " "information, such as the two package caches <literal>srcpkgcache</literal> " @@ -6702,7 +6708,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:406 +#: apt.conf.5.xml:410 msgid "" "<literal>Dir::Etc</literal> contains the location of configuration files, " "<literal>sourcelist</literal> gives the location of the sourcelist and " @@ -6717,7 +6723,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:412 +#: apt.conf.5.xml:416 msgid "" "The <literal>Dir::Parts</literal> setting reads in all the config fragments " "in lexical order from the directory specified. After this is done then the " @@ -6729,7 +6735,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:416 +#: apt.conf.5.xml:420 #, fuzzy #| msgid "" #| "Binary programs are pointed to by <literal>Dir::Bin</literal>. " @@ -6754,7 +6760,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:424 +#: apt.conf.5.xml:428 msgid "" "The configuration item <literal>RootDir</literal> has a special meaning. If " "set, all paths in <literal>Dir::</literal> will be relative to " @@ -6775,13 +6781,13 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:437 +#: apt.conf.5.xml:441 msgid "APT in DSelect" msgstr "DSelect ã§ã® APT" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:439 +#: apt.conf.5.xml:443 msgid "" "When APT is used as a &dselect; method several configuration directives " "control the default behaviour. These are in the <literal>DSelect</literal> " @@ -6791,13 +6797,13 @@ msgstr "" "設定項目ã§ã€ãƒ‡ãƒ•ã‚©ãƒ«ãƒˆã®å‹•ä½œã‚’制御ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:443 +#: apt.conf.5.xml:447 msgid "Clean" msgstr "Clean" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:444 +#: apt.conf.5.xml:448 msgid "" "Cache Clean mode; this value may be one of always, prompt, auto, pre-auto " "and never. always and prompt will remove all packages from the cache after " @@ -6814,7 +6820,7 @@ msgstr "" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:453 +#: apt.conf.5.xml:457 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the install phase." @@ -6824,13 +6830,13 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:457 +#: apt.conf.5.xml:461 msgid "Updateoptions" msgstr "Updateoptions" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:458 +#: apt.conf.5.xml:462 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the update phase." @@ -6839,13 +6845,13 @@ msgstr "" "ã•ã‚Œã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:462 +#: apt.conf.5.xml:466 msgid "PromptAfterUpdate" msgstr "PromptAfterUpdate" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:463 +#: apt.conf.5.xml:467 msgid "" "If true the [U]pdate operation in &dselect; will always prompt to continue. " "The default is to prompt only on error." @@ -6855,13 +6861,13 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:469 +#: apt.conf.5.xml:473 msgid "How APT calls dpkg" msgstr "APT ㌠dpkg を呼ã¶æ–¹æ³•" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:470 +#: apt.conf.5.xml:474 msgid "" "Several configuration directives control how APT invokes &dpkg;. These are " "in the <literal>DPkg</literal> section." @@ -6871,7 +6877,7 @@ msgstr "" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:475 +#: apt.conf.5.xml:479 msgid "" "This is a list of options to pass to dpkg. The options must be specified " "using the list notation and each list item is passed as a single argument to " @@ -6881,18 +6887,18 @@ msgstr "" "ã‘ã‚Œã°ãªã‚Šã¾ã›ã‚“。ã¾ãŸã€å„リストã¯å˜ä¸€ã®å¼•æ•°ã¨ã—㦠&dpkg; ã«æ¸¡ã•ã‚Œã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:480 +#: apt.conf.5.xml:484 msgid "Pre-Invoke" msgstr "Pre-Invoke" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:480 +#: apt.conf.5.xml:484 msgid "Post-Invoke" msgstr "Post-Invoke" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:481 +#: apt.conf.5.xml:485 msgid "" "This is a list of shell commands to run before/after invoking &dpkg;. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -6906,13 +6912,13 @@ msgstr "" # type: <tag></tag> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:487 +#: apt.conf.5.xml:491 msgid "Pre-Install-Pkgs" msgstr "Pre-Install-Pkgs" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:488 +#: apt.conf.5.xml:492 msgid "" "This is a list of shell commands to run before invoking dpkg. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -6928,7 +6934,7 @@ msgstr "" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:494 +#: apt.conf.5.xml:498 msgid "" "Version 2 of this protocol dumps more information, including the protocol " "version, the APT configuration space and the packages, files and versions " @@ -6944,13 +6950,13 @@ msgstr "" # type: Content of: <refentry><refsect1><refsect2><title> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:501 +#: apt.conf.5.xml:505 msgid "Run-Directory" msgstr "Run-Directory" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:502 +#: apt.conf.5.xml:506 msgid "" "APT chdirs to this directory before invoking dpkg, the default is <filename>/" "</filename>." @@ -6960,13 +6966,13 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:506 +#: apt.conf.5.xml:510 msgid "Build-options" msgstr "Build-options" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:507 +#: apt.conf.5.xml:511 msgid "" "These options are passed to &dpkg-buildpackage; when compiling packages, the " "default is to disable signing and produce all binaries." @@ -6975,12 +6981,12 @@ msgstr "" "ã¾ã™ã€‚デフォルトã§ã¯ç½²åを無効ã«ã—ã€å…¨ãƒã‚¤ãƒŠãƒªã‚’生æˆã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><refsect2><title> -#: apt.conf.5.xml:512 +#: apt.conf.5.xml:516 msgid "dpkg trigger usage (and related options)" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:513 +#: apt.conf.5.xml:517 msgid "" "APT can call dpkg in a way so it can make aggressive use of triggers over " "multiply calls of dpkg. Without further options dpkg will use triggers only " @@ -6995,7 +7001,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para><literallayout> -#: apt.conf.5.xml:528 +#: apt.conf.5.xml:532 #, no-wrap msgid "" "DPkg::NoTriggers \"true\";\n" @@ -7005,7 +7011,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:522 +#: apt.conf.5.xml:526 msgid "" "Note that it is not guaranteed that APT will support these options or that " "these options will not cause (big) trouble in the future. If you have " @@ -7019,12 +7025,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:534 +#: apt.conf.5.xml:538 msgid "DPkg::NoTriggers" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:535 +#: apt.conf.5.xml:539 msgid "" "Add the no triggers flag to all dpkg calls (expect the ConfigurePending " "call). See &dpkg; if you are interested in what this actually means. In " @@ -7037,14 +7043,14 @@ msgstr "" # type: <tag></tag> #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:542 +#: apt.conf.5.xml:546 #, fuzzy #| msgid "Packages::Compress" msgid "PackageManager::Configure" msgstr "Packages::Compress" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:543 +#: apt.conf.5.xml:547 msgid "" "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " "and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default " @@ -7061,13 +7067,13 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:553 +#: apt.conf.5.xml:557 #, fuzzy msgid "DPkg::ConfigurePending" msgstr "ユーザã®è¨­å®š" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:554 +#: apt.conf.5.xml:558 msgid "" "If this option is set apt will call <command>dpkg --configure --pending</" "command> to let dpkg handle all required configurations and triggers. This " @@ -7078,12 +7084,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:560 +#: apt.conf.5.xml:564 msgid "DPkg::TriggersPending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:561 +#: apt.conf.5.xml:565 msgid "" "Useful for <literal>smart</literal> configuration as a package which has " "pending triggers is not considered as <literal>installed</literal> and dpkg " @@ -7093,12 +7099,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:566 +#: apt.conf.5.xml:570 msgid "PackageManager::UnpackAll" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:567 +#: apt.conf.5.xml:571 msgid "" "As the configuration can be deferred to be done at the end by dpkg it can be " "tried to order the unpack series only by critical needs, e.g. by Pre-" @@ -7110,12 +7116,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:574 +#: apt.conf.5.xml:578 msgid "OrderList::Score::Immediate" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:582 +#: apt.conf.5.xml:586 #, no-wrap msgid "" "OrderList::Score {\n" @@ -7127,7 +7133,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:575 +#: apt.conf.5.xml:579 msgid "" "Essential packages (and there dependencies) should be configured immediately " "after unpacking. It will be a good idea to do this quite early in the " @@ -7141,12 +7147,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:595 +#: apt.conf.5.xml:599 msgid "Periodic and Archives options" msgstr "Periodic オプション㨠Archives オプション" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:596 +#: apt.conf.5.xml:600 msgid "" "<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups " "of options configure behavior of apt periodic updates, which is done by " @@ -7160,12 +7166,12 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:604 +#: apt.conf.5.xml:608 msgid "Debug options" msgstr "デãƒãƒƒã‚°ã‚ªãƒ—ション" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:606 +#: apt.conf.5.xml:610 msgid "" "Enabling options in the <literal>Debug::</literal> section will cause " "debugging information to be sent to the standard error stream of the program " @@ -7176,7 +7182,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:617 +#: apt.conf.5.xml:621 msgid "" "<literal>Debug::pkgProblemResolver</literal> enables output about the " "decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</" @@ -7187,7 +7193,7 @@ msgstr "" "ã«ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:625 +#: apt.conf.5.xml:629 msgid "" "<literal>Debug::NoLocking</literal> disables all file locking. This can be " "used to run some operations (for instance, <literal>apt-get -s install</" @@ -7198,7 +7204,7 @@ msgstr "" "literal>) ã‚’è¡Œã†å ´åˆã«ä½¿ç”¨ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:634 +#: apt.conf.5.xml:638 msgid "" "<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each " "time that <literal>apt</literal> invokes &dpkg;." @@ -7208,66 +7214,66 @@ msgstr "" #. motivating example, except I haven't a clue why you'd want #. to do this. #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:642 +#: apt.conf.5.xml:646 msgid "" "<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data " "in CDROM IDs." msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:652 +#: apt.conf.5.xml:656 msgid "A full list of debugging options to apt follows." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:657 +#: apt.conf.5.xml:661 msgid "<literal>Debug::Acquire::cdrom</literal>" msgstr "<literal>Debug::Acquire::cdrom</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:661 +#: apt.conf.5.xml:665 msgid "" "Print information related to accessing <literal>cdrom://</literal> sources." msgstr "" "<literal>cdrom://</literal> ソースã¸ã®ã‚¢ã‚¯ã‚»ã‚¹ã«é–¢ã™ã‚‹æƒ…報を出力ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:668 +#: apt.conf.5.xml:672 msgid "<literal>Debug::Acquire::ftp</literal>" msgstr "<literal>Debug::Acquire::ftp</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:672 +#: apt.conf.5.xml:676 msgid "Print information related to downloading packages using FTP." msgstr "FTP を用ã„ãŸãƒ‘ッケージã®ãƒ€ã‚¦ãƒ³ãƒ­ãƒ¼ãƒ‰ã«é–¢ã™ã‚‹æƒ…報を出力ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:679 +#: apt.conf.5.xml:683 msgid "<literal>Debug::Acquire::http</literal>" msgstr "<literal>Debug::Acquire::http</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:683 +#: apt.conf.5.xml:687 msgid "Print information related to downloading packages using HTTP." msgstr "HTTP を用ã„ãŸãƒ‘ッケージã®ãƒ€ã‚¦ãƒ³ãƒ­ãƒ¼ãƒ‰ã«é–¢ã™ã‚‹æƒ…報を出力ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:690 +#: apt.conf.5.xml:694 msgid "<literal>Debug::Acquire::https</literal>" msgstr "<literal>Debug::Acquire::https</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:694 +#: apt.conf.5.xml:698 msgid "Print information related to downloading packages using HTTPS." msgstr "HTTPS を用ã„ãŸãƒ‘ッケージã®ãƒ€ã‚¦ãƒ³ãƒ­ãƒ¼ãƒ‰ã«é–¢ã™ã‚‹æƒ…報を出力ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:701 +#: apt.conf.5.xml:705 msgid "<literal>Debug::Acquire::gpgv</literal>" msgstr "<literal>Debug::Acquire::gpgv</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:705 +#: apt.conf.5.xml:709 msgid "" "Print information related to verifying cryptographic signatures using " "<literal>gpg</literal>." @@ -7275,46 +7281,46 @@ msgstr "" "<literal>gpg</literal> を用ã„ãŸæš—å·ç½²åã®æ¤œè¨¼ã«é–¢ã™ã‚‹æƒ…報を出力ã—ã¾ã™ã€‚" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:712 +#: apt.conf.5.xml:716 msgid "<literal>Debug::aptcdrom</literal>" msgstr "<literal>Debug::aptcdrom</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:716 +#: apt.conf.5.xml:720 msgid "" "Output information about the process of accessing collections of packages " "stored on CD-ROMs." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:723 +#: apt.conf.5.xml:727 msgid "<literal>Debug::BuildDeps</literal>" msgstr "<literal>Debug::BuildDeps</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:726 +#: apt.conf.5.xml:730 msgid "Describes the process of resolving build-dependencies in &apt-get;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:733 +#: apt.conf.5.xml:737 msgid "<literal>Debug::Hashes</literal>" msgstr "<literal>Debug::Hashes</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:736 +#: apt.conf.5.xml:740 msgid "" "Output each cryptographic hash that is generated by the <literal>apt</" "literal> libraries." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:743 +#: apt.conf.5.xml:747 msgid "<literal>Debug::IdentCDROM</literal>" msgstr "<literal>Debug::IdentCDROM</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:746 +#: apt.conf.5.xml:750 msgid "" "Do not include information from <literal>statfs</literal>, namely the number " "of used and free blocks on the CD-ROM filesystem, when generating an ID for " @@ -7322,93 +7328,93 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:754 +#: apt.conf.5.xml:758 msgid "<literal>Debug::NoLocking</literal>" msgstr "<literal>Debug::NoLocking</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:757 +#: apt.conf.5.xml:761 msgid "" "Disable all file locking. For instance, this will allow two instances of " "<quote><literal>apt-get update</literal></quote> to run at the same time." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:765 +#: apt.conf.5.xml:769 msgid "<literal>Debug::pkgAcquire</literal>" msgstr "<literal>Debug::pkgAcquire</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:769 +#: apt.conf.5.xml:773 msgid "Log when items are added to or removed from the global download queue." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:776 +#: apt.conf.5.xml:780 msgid "<literal>Debug::pkgAcquire::Auth</literal>" msgstr "<literal>Debug::pkgAcquire::Auth</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:779 +#: apt.conf.5.xml:783 msgid "" "Output status messages and errors related to verifying checksums and " "cryptographic signatures of downloaded files." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:786 +#: apt.conf.5.xml:790 msgid "<literal>Debug::pkgAcquire::Diffs</literal>" msgstr "<literal>Debug::pkgAcquire::Diffs</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:789 +#: apt.conf.5.xml:793 msgid "" "Output information about downloading and applying package index list diffs, " "and errors relating to package index list diffs." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:797 +#: apt.conf.5.xml:801 msgid "<literal>Debug::pkgAcquire::RRed</literal>" msgstr "<literal>Debug::pkgAcquire::RRed</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:801 +#: apt.conf.5.xml:805 msgid "" "Output information related to patching apt package lists when downloading " "index diffs instead of full indices." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:808 +#: apt.conf.5.xml:812 msgid "<literal>Debug::pkgAcquire::Worker</literal>" msgstr "<literal>Debug::pkgAcquire::Worker</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:812 +#: apt.conf.5.xml:816 msgid "" "Log all interactions with the sub-processes that actually perform downloads." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:819 +#: apt.conf.5.xml:823 msgid "<literal>Debug::pkgAutoRemove</literal>" msgstr "<literal>Debug::pkgAutoRemove</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:823 +#: apt.conf.5.xml:827 msgid "" "Log events related to the automatically-installed status of packages and to " "the removal of unused packages." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:830 +#: apt.conf.5.xml:834 msgid "<literal>Debug::pkgDepCache::AutoInstall</literal>" msgstr "<literal>Debug::pkgDepCache::AutoInstall</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:833 +#: apt.conf.5.xml:837 msgid "" "Generate debug messages describing which packages are being automatically " "installed to resolve dependencies. This corresponds to the initial auto-" @@ -7418,12 +7424,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:844 +#: apt.conf.5.xml:848 msgid "<literal>Debug::pkgDepCache::Marker</literal>" msgstr "<literal>Debug::pkgDepCache::Marker</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:847 +#: apt.conf.5.xml:851 msgid "" "Generate debug messages describing which package is marked as keep/install/" "remove while the ProblemResolver does his work. Each addition or deletion " @@ -7440,91 +7446,91 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:866 +#: apt.conf.5.xml:870 msgid "<literal>Debug::pkgInitConfig</literal>" msgstr "<literal>Debug::pkgInitConfig</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:869 +#: apt.conf.5.xml:873 msgid "Dump the default configuration to standard error on startup." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:876 +#: apt.conf.5.xml:880 msgid "<literal>Debug::pkgDPkgPM</literal>" msgstr "<literal>Debug::pkgDPkgPM</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:879 +#: apt.conf.5.xml:883 msgid "" "When invoking &dpkg;, output the precise command line with which it is being " "invoked, with arguments separated by a single space character." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:887 +#: apt.conf.5.xml:891 msgid "<literal>Debug::pkgDPkgProgressReporting</literal>" msgstr "<literal>Debug::pkgDPkgProgressReporting</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:890 +#: apt.conf.5.xml:894 msgid "" "Output all the data received from &dpkg; on the status file descriptor and " "any errors encountered while parsing it." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:897 +#: apt.conf.5.xml:901 msgid "<literal>Debug::pkgOrderList</literal>" msgstr "<literal>Debug::pkgOrderList</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:901 +#: apt.conf.5.xml:905 msgid "" "Generate a trace of the algorithm that decides the order in which " "<literal>apt</literal> should pass packages to &dpkg;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:909 +#: apt.conf.5.xml:913 msgid "<literal>Debug::pkgPackageManager</literal>" msgstr "<literal>Debug::pkgPackageManager</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:913 +#: apt.conf.5.xml:917 msgid "" "Output status messages tracing the steps performed when invoking &dpkg;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:920 +#: apt.conf.5.xml:924 msgid "<literal>Debug::pkgPolicy</literal>" msgstr "<literal>Debug::pkgPolicy</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:924 +#: apt.conf.5.xml:928 msgid "Output the priority of each package list on startup." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:930 +#: apt.conf.5.xml:934 msgid "<literal>Debug::pkgProblemResolver</literal>" msgstr "<literal>Debug::pkgProblemResolver</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:934 +#: apt.conf.5.xml:938 msgid "" "Trace the execution of the dependency resolver (this applies only to what " "happens when a complex dependency problem is encountered)." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:942 +#: apt.conf.5.xml:946 msgid "<literal>Debug::pkgProblemResolver::ShowScores</literal>" msgstr "<literal>Debug::pkgProblemResolver::ShowScores</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:945 +#: apt.conf.5.xml:949 msgid "" "Display a list of all installed packages with their calculated score used by " "the pkgProblemResolver. The description of the package is the same as " @@ -7532,12 +7538,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:953 +#: apt.conf.5.xml:957 msgid "<literal>Debug::sourceList</literal>" msgstr "<literal>Debug::sourceList</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:957 +#: apt.conf.5.xml:961 msgid "" "Print information about the vendors read from <filename>/etc/apt/vendors." "list</filename>." @@ -7545,7 +7551,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:979 +#: apt.conf.5.xml:983 msgid "" "&configureindex; is a configuration file showing example values for all " "possible options." @@ -7555,7 +7561,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><variablelist> -#: apt.conf.5.xml:986 +#: apt.conf.5.xml:990 #, fuzzy #| msgid "&apt-conf;" msgid "&file-aptconf;" @@ -7564,7 +7570,7 @@ msgstr "&apt-conf;" # type: Content of: <refentry><refsect1><para> #. ? reading apt.conf #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:991 +#: apt.conf.5.xml:995 msgid "&apt-cache;, &apt-config;, &apt-preferences;." msgstr "&apt-cache;, &apt-config;, &apt-preferences;." -- cgit v1.2.3 From 339a6808b961a4dc1910ffd442a857e16366a07f Mon Sep 17 00:00:00 2001 From: David Kalnischkies <kalnischkies@gmail.com> Date: Wed, 28 Oct 2009 23:52:24 +0100 Subject: fix some man page section numbers form programs referenced in the manpages including dpkg and dselect which are in 1 instead of 8. --- doc/apt.ent | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'doc') diff --git a/doc/apt.ent b/doc/apt.ent index 9a4c17bcd..0b341ec14 100644 --- a/doc/apt.ent +++ b/doc/apt.ent @@ -78,7 +78,7 @@ <!ENTITY dpkg "<citerefentry> <refentrytitle><command>dpkg</command></refentrytitle> - <manvolnum>8</manvolnum> + <manvolnum>1</manvolnum> </citerefentry>" > @@ -96,19 +96,19 @@ <!ENTITY dpkg-scanpackages "<citerefentry> <refentrytitle><command>dpkg-scanpackages</command></refentrytitle> - <manvolnum>8</manvolnum> + <manvolnum>1</manvolnum> </citerefentry>" > <!ENTITY dpkg-scansources "<citerefentry> <refentrytitle><command>dpkg-scansources</command></refentrytitle> - <manvolnum>8</manvolnum> + <manvolnum>1</manvolnum> </citerefentry>" > <!ENTITY dselect "<citerefentry> <refentrytitle><command>dselect</command></refentrytitle> - <manvolnum>8</manvolnum> + <manvolnum>1</manvolnum> </citerefentry>" > -- cgit v1.2.3 From 5f4331c4d265aa83229e3e58edd49e54731fb646 Mon Sep 17 00:00:00 2001 From: David Kalnischkies <kalnischkies@gmail.com> Date: Thu, 29 Oct 2009 00:14:21 +0100 Subject: correct various errors, typos and oddities in the manpages Patch by Chris Leick which closes his on bug. Thanks! * doc/ various manpages: - correct various errors, typos and oddities (Closes: #552535) * doc/apt-secure.8.xml: - replace literal with emphasis tags in Archive configuration --- doc/apt-cache.8.xml | 2 +- doc/apt-extracttemplates.1.xml | 2 +- doc/apt-ftparchive.1.xml | 2 +- doc/apt-get.8.xml | 4 ++-- doc/apt-secure.8.xml | 12 ++++++------ doc/apt.conf.5.xml | 18 +++++++++--------- doc/sources.list.5.xml | 14 +++++++------- 7 files changed, 27 insertions(+), 27 deletions(-) (limited to 'doc') diff --git a/doc/apt-cache.8.xml b/doc/apt-cache.8.xml index c61d00e47..538de3c27 100644 --- a/doc/apt-cache.8.xml +++ b/doc/apt-cache.8.xml @@ -151,7 +151,7 @@ Reverse Provides: <listitem><para><literal>Missing</literal> is the number of package names that were referenced in a dependency but were not provided by any package. Missing packages may - be in evidence if a full distribution is not accessed, or if a package + be an evidence if a full distribution is not accessed, or if a package (real or virtual) has been dropped from the distribution. Usually they are referenced from Conflicts or Breaks statements.</para> </listitem> diff --git a/doc/apt-extracttemplates.1.xml b/doc/apt-extracttemplates.1.xml index 77b837022..9f8a4056d 100644 --- a/doc/apt-extracttemplates.1.xml +++ b/doc/apt-extracttemplates.1.xml @@ -60,7 +60,7 @@ <varlistentry><term><option>-t</option></term><term><option>--tempdir</option></term> <listitem><para> Temporary directory in which to write extracted debconf template files - and config scripts + and config scripts. Configuration Item: <literal>APT::ExtractTemplates::TempDir</literal></para></listitem> </varlistentry> diff --git a/doc/apt-ftparchive.1.xml b/doc/apt-ftparchive.1.xml index 334cc85da..d4d77c68e 100644 --- a/doc/apt-ftparchive.1.xml +++ b/doc/apt-ftparchive.1.xml @@ -158,7 +158,7 @@ <para> The <literal>Dir</literal> section defines the standard directories needed to locate the files required during the generation process. These - directories are prepended to certain relative paths defined in later + directories are prepended certain relative paths defined in later sections to produce a complete an absolute path.</para> <variablelist> <varlistentry><term>ArchiveDir</term> diff --git a/doc/apt-get.8.xml b/doc/apt-get.8.xml index 4735dcd34..d3c3772bd 100644 --- a/doc/apt-get.8.xml +++ b/doc/apt-get.8.xml @@ -263,7 +263,7 @@ you will properly get another (newer, older or none) source version than the one you have installed or could install.</para> - <para>If the <option>--compile</option> options is specified + <para>If the <option>--compile</option> option is specified then the package will be compiled to a binary .deb using <command>dpkg-buildpackage</command>, if <option>--download-only</option> is specified then the source package will not be unpacked.</para> @@ -391,7 +391,7 @@ <para>Simulate prints out a series of lines each one representing a dpkg operation, Configure (Conf), - Remove (Remv), Unpack (Inst). Square brackets indicate broken packages with + Remove (Remv), Unpack (Inst). Square brackets indicate broken packages and empty set of square brackets meaning breaks that are of no consequence (rare).</para></listitem> </varlistentry> diff --git a/doc/apt-secure.8.xml b/doc/apt-secure.8.xml index 20f473f77..908fc342f 100644 --- a/doc/apt-secure.8.xml +++ b/doc/apt-secure.8.xml @@ -68,7 +68,7 @@ different steps. <command>apt-secure</command> is the last step in this chain, trusting an archive does not mean that the packages that you trust it do not contain malicious code but means that you - trust the archive maintainer. Its the archive maintainer + trust the archive maintainer. It's the archive maintainer responsibility to ensure that the archive integrity is correct. </para> @@ -94,7 +94,7 @@ is computed and put in the Packages file. The MD5 sum of all of the packages files are then computed and put into the Release file. The Release file is then signed by the archive key (which is created - once a year and distributed through the FTP server. This key is + once a year) and distributed through the FTP server. This key is also on the Debian keyring. </para> @@ -157,15 +157,15 @@ </para> <itemizedlist> - <listitem><para><literal>Create a toplevel Release - file</literal>. if it does not exist already. You can do this + <listitem><para><emphasis>Create a toplevel Release + file</emphasis>, if it does not exist already. You can do this by running <command>apt-ftparchive release</command> (provided in apt-utils).</para></listitem> - <listitem><para><literal>Sign it</literal>. You can do this by running + <listitem><para><emphasis>Sign it</emphasis>. You can do this by running <command>gpg -abs -o Release.gpg Release</command>.</para></listitem> - <listitem><para><literal>Publish the key fingerprint</literal>, + <listitem><para><emphasis>Publish the key fingerprint</emphasis>, that way your users will know what key they need to import in order to authenticate the files in the archive.</para></listitem> diff --git a/doc/apt.conf.5.xml b/doc/apt.conf.5.xml index 6ee719987..e2db9defb 100644 --- a/doc/apt.conf.5.xml +++ b/doc/apt.conf.5.xml @@ -48,9 +48,9 @@ loading even more config files.</para> <para>The configuration file is organized in a tree with options organized into - functional groups. option specification is given with a double colon + functional groups. Option specification is given with a double colon notation, for instance <literal>APT::Get::Assume-Yes</literal> is an option within - the APT tool group, for the Get tool. options do not inherit from their + the APT tool group, for the Get tool. Options do not inherit from their parent groups.</para> <para>Syntactically the configuration language is modeled after what the ISC tools @@ -58,7 +58,7 @@ <literal>//</literal> are treated as comments (ignored), as well as all text between <literal>/*</literal> and <literal>*/</literal>, just like C/C++ comments. Each line is of the form - <literal>APT::Get::Assume-Yes "true";</literal> The trailing + <literal>APT::Get::Assume-Yes "true";</literal>. The trailing semicolon and the quotes are required. The value must be on one line, and there is no kind of string concatenation. It must not include inside quotes. The behavior of the backslash "\" and escaped characters inside a value is @@ -265,7 +265,7 @@ DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt";}; this applies to all things including connection timeout and data timeout.</para> <para>One setting is provided to control the pipeline depth in cases where the - remote server is not RFC conforming or buggy (such as Squid 2.0.2) + remote server is not RFC conforming or buggy (such as Squid 2.0.2). <literal>Acquire::http::Pipeline-Depth</literal> can be a value from 0 to 5 indicating how many outstanding requests APT should send. A value of zero MUST be specified if the remote host does not properly linger @@ -536,9 +536,9 @@ DPkg::TriggersPending "true";</literallayout></para> <variablelist> <varlistentry><term>DPkg::NoTriggers</term> - <listitem><para>Add the no triggers flag to all dpkg calls (expect the ConfigurePending call). + <listitem><para>Add the no triggers flag to all dpkg calls (except the ConfigurePending call). See &dpkg; if you are interested in what this actually means. In short: dpkg will not run the - triggers then this flag is present unless it is explicit called to do so in an extra call. + triggers when this flag is present unless it is explicitly called to do so in an extra call. Note that this option exists (undocumented) also in older apt versions with a slightly different meaning: Previously these option only append --no-triggers to the configure calls to dpkg - now apt will add these flag also to the unpack and remove calls.</para></listitem> @@ -549,8 +549,8 @@ DPkg::TriggersPending "true";</literallayout></para> The "<literal>smart</literal>" way is it to configure only packages which need to be configured before another package can be unpacked (Pre-Depends) and let the rest configure by dpkg with a call generated by the next option. "<literal>no</literal>" on the other hand will not configure anything and totally - relay on dpkg for configuration (which will at the moment fail if a Pre-Depends is encountered). - Setting this option to another than the all value will implicit activate also the next option per + rely on dpkg for configuration (which will at the moment fail if a Pre-Depends is encountered). + Setting this option to another than the all value will implicitly activate also the next option per default as otherwise the system could end in an unconfigured status which could be unbootable! </para></listitem> </varlistentry> @@ -558,7 +558,7 @@ DPkg::TriggersPending "true";</literallayout></para> <listitem><para>If this option is set apt will call <command>dpkg --configure --pending</command> to let dpkg handle all required configurations and triggers. This option is activated automatic per default if the previous option is not set to <literal>all</literal>, but deactivating could be useful - if you want to run APT multiple times in a row - e.g. in an installer. In this sceneries you could + if you want to run APT multiple times in a row - e.g. in an installer. In these sceneries you could deactivate this option in all but the last run.</para></listitem> </varlistentry> <varlistentry><term>DPkg::TriggersPending</term> diff --git a/doc/sources.list.5.xml b/doc/sources.list.5.xml index 379112c83..0f788aca1 100644 --- a/doc/sources.list.5.xml +++ b/doc/sources.list.5.xml @@ -34,13 +34,13 @@ <para>The package resource list is used to locate archives of the package distribution system in use on the system. At this time, this manual page documents only the packaging system used by the Debian GNU/Linux system. - This control file is located in <filename>/etc/apt/sources.list</filename></para> + This control file is <filename>/etc/apt/sources.list</filename>.</para> <para>The source list is designed to support any number of active sources and a variety of source media. The file lists one source per line, with the most preferred source listed first. The format of each line is: <literal>type uri args</literal> The first item, <literal>type</literal> - determines the format for <literal>args</literal> <literal>uri</literal> is + determines the format for <literal>args</literal>. <literal>uri</literal> is a Universal Resource Identifier (URI), which is a superset of the more specific and well-known Universal Resource Locator, or URL. The rest of the line can be marked as a comment @@ -64,14 +64,14 @@ <literal>stable</literal> <literal>unstable</literal> or <literal>testing</literal> while component is one of <literal>main</literal> <literal>contrib</literal> <literal>non-free</literal> or - <literal>non-us</literal> The + <literal>non-us</literal>. The <literal>deb-src</literal> type describes a debian distribution's source code in the same form as the <literal>deb</literal> type. A <literal>deb-src</literal> line is required to fetch source indexes.</para> <para>The format for a <filename>sources.list</filename> entry using the - <literal>deb</literal> and <literal>deb-src</literal> types are:</para> + <literal>deb</literal> and <literal>deb-src</literal> types is:</para> <literallayout>deb uri distribution [component1] [component2] [...]</literallayout> @@ -79,7 +79,7 @@ Debian distribution, from which APT will find the information it needs. <literal>distribution</literal> can specify an exact path, in which case the components must be omitted and <literal>distribution</literal> must end with - a slash (/). This is useful for when only a particular sub-section of the + a slash (/). This is useful for when the case only a particular sub-section of the archive denoted by the URI is of interest. If <literal>distribution</literal> does not specify an exact path, at least one <literal>component</literal> must be present.</para> @@ -143,7 +143,7 @@ deb http://http.us.debian.org/debian dists/stable-updates/ http://server:port/, the proxy server specified in <envar>http_proxy</envar> will be used. Users of authenticated HTTP/1.1 proxies may use a string of the format - http://user:pass@server:port/ + http://user:pass@server:port/. Note that this is an insecure method of authentication.</para></listitem> </varlistentry> @@ -211,7 +211,7 @@ deb http://http.us.debian.org/debian dists/stable-updates/ <para>Uses FTP to access the archive at ftp.debian.org, under the debian directory, and uses only the unstable/contrib area. If this line appears as - well as the one in the previous example in <filename>sources.list</filename>. + well as the one in the previous example in <filename>sources.list</filename> a single FTP session will be used for both resource lines.</para> <literallayout>deb ftp://ftp.debian.org/debian unstable contrib</literallayout> -- cgit v1.2.3 From 00167138d775a10044197029b0c95bdfc9ca679e Mon Sep 17 00:00:00 2001 From: David Kalnischkies <kalnischkies@gmail.com> Date: Thu, 29 Oct 2009 18:01:10 +0100 Subject: remove unneeded doc/ja/manpage.links (left over from the ja-po4a-patch) --- doc/ja/manpage.links | 0 1 file changed, 0 insertions(+), 0 deletions(-) delete mode 100644 doc/ja/manpage.links (limited to 'doc') diff --git a/doc/ja/manpage.links b/doc/ja/manpage.links deleted file mode 100644 index e69de29bb..000000000 -- cgit v1.2.3 From 944b2fffc4a54fbf9329faa579592cc758915a99 Mon Sep 17 00:00:00 2001 From: David Kalnischkies <kalnischkies@gmail.com> Date: Thu, 29 Oct 2009 21:34:31 +0100 Subject: remove generated sgml files (if we really had build them) --- doc/makefile | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'doc') diff --git a/doc/makefile b/doc/makefile index fe53aba48..26ca52a9e 100644 --- a/doc/makefile +++ b/doc/makefile @@ -43,6 +43,14 @@ veryclean-subdirs: for dir in $(SUBDIRS); do\ $(MAKE) -C $$dir veryclean; \ done + # FIXME remove created sgml files, but preserve all + # which are "left over" from older systems. + # After completing the transition this should be handled + # in the po4a-manpage makefile for all translations + for dir in $(subst /addendum/,, $(dir $(wildcard */addendum/debiandoc*))); do\ + rm -f $$dir/offline.$$dir.sgml; \ + rm -f $$dir/guide.$$dir.sgml; \ + done ifdef PO4A doc: po4a -- cgit v1.2.3 From 41f28cb341b1757162826ba2f8fc1ce75ecb25b7 Mon Sep 17 00:00:00 2001 From: David Kalnischkies <kalnischkies@gmail.com> Date: Sun, 1 Nov 2009 23:36:09 +0100 Subject: disable addendum for sgml-files as we have no valid file until now Will be reenabled after Translators provide such a file. --- doc/de/addendum/debiandoc_de.add | 6 ------ doc/fr/addendum/debiandoc_fr.add | 7 ------- doc/ja/addendum/debiandoc_ja.add | 7 ------- doc/makefile | 2 +- doc/po4a.conf | 8 ++++---- 5 files changed, 5 insertions(+), 25 deletions(-) delete mode 100644 doc/de/addendum/debiandoc_de.add delete mode 100644 doc/fr/addendum/debiandoc_fr.add delete mode 100644 doc/ja/addendum/debiandoc_ja.add (limited to 'doc') diff --git a/doc/de/addendum/debiandoc_de.add b/doc/de/addendum/debiandoc_de.add deleted file mode 100644 index 2332878a6..000000000 --- a/doc/de/addendum/debiandoc_de.add +++ /dev/null @@ -1,6 +0,0 @@ -PO4A-HEADER:mode=after;position=manbugs;beginboundary=^</refentry> - <refsect1><title>Ãœbersetzung - Die deutsche Ãœbersetzung wurde 2009 von Chris Leick c.leick@vollbio.de angefertigt - in Zusammenarbeit mit dem Debian German-l10n-Team debian-l10n-german@lists.debian.org. - - diff --git a/doc/fr/addendum/debiandoc_fr.add b/doc/fr/addendum/debiandoc_fr.add deleted file mode 100644 index 987b5b1f5..000000000 --- a/doc/fr/addendum/debiandoc_fr.add +++ /dev/null @@ -1,7 +0,0 @@ -PO4A-HEADER:mode=after;position=manbugs;beginboundary=^ - Traducteurs - Jérôme Marant, Philippe Batailler, Christian Perrier bubulle@debian.org (2000, 2005, 2009), - Équipe de traduction francophone de Debian debian-l10n-french@lists.debian.org - - - diff --git a/doc/ja/addendum/debiandoc_ja.add b/doc/ja/addendum/debiandoc_ja.add deleted file mode 100644 index 05d4cff3f..000000000 --- a/doc/ja/addendum/debiandoc_ja.add +++ /dev/null @@ -1,7 +0,0 @@ -PO4A-HEADER:mode=after;position=manbugs;beginboundary=^ - 訳者 - 倉澤 望 nabetaro@debian.or.jp (2003-2006,2009), - Debian JP Documentation ML debian-doc@debian.or.jp - - - diff --git a/doc/makefile b/doc/makefile index 26ca52a9e..0cb135c7b 100644 --- a/doc/makefile +++ b/doc/makefile @@ -47,7 +47,7 @@ veryclean-subdirs: # which are "left over" from older systems. # After completing the transition this should be handled # in the po4a-manpage makefile for all translations - for dir in $(subst /addendum/,, $(dir $(wildcard */addendum/debiandoc*))); do\ + for dir in $(subst /addendum/,, $(dir $(wildcard */addendum/*))); do\ rm -f $$dir/offline.$$dir.sgml; \ rm -f $$dir/guide.$$dir.sgml; \ done diff --git a/doc/po4a.conf b/doc/po4a.conf index 12f2465bc..fae80d690 100644 --- a/doc/po4a.conf +++ b/doc/po4a.conf @@ -34,10 +34,10 @@ [type: docbook] sources.list.5.xml $lang:$lang/sources.list.$lang.5.xml \ add_$lang:$lang/addendum/xml_$lang.add -[type: sgml] guide.sgml $lang:$lang/guide.$lang.sgml \ - add_$lang::$lang/addendum/debiandoc_$lang.add -[type: sgml] offline.sgml $lang:$lang/offline.$lang.sgml \ - add_$lang::$lang/addendum/debiandoc_$lang.add +[type: sgml] guide.sgml $lang:$lang/guide.$lang.sgml +# add_$lang::$lang/addendum/debiandoc_$lang.add +[type: sgml] offline.sgml $lang:$lang/offline.$lang.sgml +# add_$lang::$lang/addendum/debiandoc_$lang.add #[type: sgml] cache.sgml $lang:$lang/cache.$lang.sgml \ # add_$lang::$lang/addendum/debiandoc_$lang.add #[type: sgml] design.sgml $lang:$lang/design.$lang.sgml\ -- cgit v1.2.3 From 071fa62e0e421ecb0f795fa83f634701340e62ef Mon Sep 17 00:00:00 2001 From: David Kalnischkies Date: Sun, 1 Nov 2009 23:39:14 +0100 Subject: convert it translation to po4a --- doc/it/guide.it.sgml | 585 ---- doc/po/it.po | 8339 ++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 8339 insertions(+), 585 deletions(-) delete mode 100644 doc/it/guide.it.sgml create mode 100644 doc/po/it.po (limited to 'doc') diff --git a/doc/it/guide.it.sgml b/doc/it/guide.it.sgml deleted file mode 100644 index 2dc46e263..000000000 --- a/doc/it/guide.it.sgml +++ /dev/null @@ -1,585 +0,0 @@ - - - -Guida dell'utente di APT - -Jason Gunthorpe jgg@debian.org -Traduzione di Eugenia Franzoni eugenia@linuxcare.com - -$Id: guide.it.sgml,v 1.5 2003/04/26 23:26:13 doogie Exp $ - - -Guida per l'uso del gestore di pacchetti APT. - - - -Copyright © Jason Gunthorpe, 1998. - -

Ed. italiana Copyright © Eugenia Franzoni, 2000. - -

-"APT" e questo documento sono software libero, e li si può ridistribuire -e/o modificare secondo i termini della Licenza Pubblica Generica GNU -(GPL), pubblicata dalla Free Software Foundation, nella versione 2 o -(se preferite) qualsiasi versione successiva. - -

"APT" and this document are free software; you can redistribute them and/or -modify them under the terms of the GNU General Public License as published -by the Free Software Foundation; either version 2 of the License, or (at your -option) any later version. - -

-Per ulteriori dettagli sui sistemi GNU/Linux si veda il testo -completo della licenza nel file -/usr/share/common-licenses/GPL. - - - - - - -Descrizione generale - -

-Il pacchetto APT al momento contiene due sezioni, il metodo APT -dselect e l'interfaccia utente a linea di comando apt-get; -entrambi danno modo di installare e rimuovere pacchetti, e di scaricarne -altri da Internet. - -Anatomia del sistema di pacchettizzazione -

-Il sistema di pacchettizzazione di Debian contiene un gran numero di -informazioni associate a ciascun pacchetto, per assicurarsi che si -integri facilmente ed in maniera pulita nel sistema; la più -importante di esse è il sistema di dipendenze. - -

-Il sistema di dipendenze permette ai singoli programmi di fare uso -degli elementi condivisi del sistema, quali le librerie; per -ridurre il numero di elementi che l'utente medio debba installare, -le porzioni di programmi che non vengono usate spesso vengono poste -in pacchetti separati. Inoltre, è possibile avere più di una scelta per -cose quali i programmi di posta elettronica, i server X e così via. - -

-Il primo passo per capire il sistema di dipendenze è la -comprensione del concetto di dipendenza semplice: un pacchetto richiede -che un altro sia installato insieme ad esso per poter -funzionare. - - -

-Ad esempio, mail-crypt è un'estensione di emacs che aiuta a criptare le -mail con PGP. Se PGP non è installato, mail-crypt è inutile, quindi -mail-crypt ha una dipendenza semplice da PGP. Inoltre, dato che si tratta -di un'estensione di emacs, mail-crypt dipende anche da emacs, senza il -quale è totalmente inutile. - -

-L'altro tipo di dipendenza importante da capire è la dipendenza di -conflitto; con questa, un pacchetto che venga installato insieme ad un -altro pacchetto non funziona, e si hanno seri problemi al sistema. -Come esempio, si consideri un programma di trasporto della posta, -quale sendmail, exim o qmail: non è possibile averne due contemporaneamente, -perché entrambi hanno bisogno di restare in ascolto sulla stessa porta di rete -per ricevere la posta. Tentare di installarne due danneggerebbe seriamente il -sistema, quindi ciascun programma di trasporto della posta ha una -dipendenza di conflitto con tutti gli altri. - -

-Come ulteriore complicazione, c'è la possibilità che un pacchetto -voglia prendere il posto di un altro; ad esempio, exim e sendmail per molte -cose sono identici, dato che entrambi gestiscono la posta e comprendono -un'interfaccia comune, quindi il sistema di pacchettizzazione deve dichiarare -che sono entrambi agenti di trasporto della posta, e che gli altri -pacchetti a cui serve uno dei due devono dipendere da un pacchetto -fittizio agente-di-trasporto-della-posta. Quando si modificano -a mano i pacchetti, questo può portare a moltissima confusione. - -

-In ciascun momento una singola dipendenza può essere soddisfatta o meno -dai pacchetti già installati; APT cerca di risolvere i problemi -di dipendenze con un buon numero di algoritmi automatici, che aiutano -a selezionare i pacchetti da installare. - - - - - - -apt-get - -

-apt-get fornisce un modo semplice di installare i pacchetti dalla -linea di comando. Diversamente da dpkg, apt-get non -capisce i nomi dei file .deb, ma utilizza il vero nome dei pacchetti, -e può installare archivi .deb solo da una fonte. - -

-La prima Se state usando un proxy server http, dovete prima ancora -impostare la variabile d'ambiente http_proxy; vedere -sources.list(5). -cosa da fare prima di usare apt-get è impostare l'elenco dei -pacchetti dalle fonti in modo che il programma sappia quali pacchetti -sono disponibili. Lo si fa con apt-get update. Ad esempio, - -

- -# apt-get update -Get http://ftp.de.debian.org/debian-non-US/ stable/binary-i386/ Packages -Get http://llug.sep.bnl.gov/debian/ testing/contrib Packages -Reading Package Lists... Done -Building Dependency Tree... Done - - -

-Dopo aver aggiornato l'elenco si possono usare molti comandi: - -upgrade -Upgrade tenterà di fare un aggiornamento indolore del sistema completo, -senza installare nuovi pacchetti o rimuoverne di esistenti, e senza -aggiornare un pacchetto che possa rovinarne altri. Upgrade farà un elenco -di tutti i pacchetti che non avrà potuto aggiornare, cosa che in genere -significa che questi dipendono da nuovi pacchetti o vanno in conflitto -con altri. Per forzare la loro installazione si può usare -dselect o apt-get install. - -install -Install viene usato per installare i singoli pacchetti dando il loro nome. -Il pacchetto viene automaticamente scaricato ed installato, cosa molto utile -se già se ne conosce il nome e non si vuole entrare in grafica per -selezionarlo. Al comando si possono passare anche più pacchetti, che saranno -tutti scaricati. L'installazione automatica cerca di risolvere i problemi -di dipendenze con gli altri pacchetti elencati, stampa un riassunto e -chiede conferma se si devono modificare altri pacchetti che non siano quelli -sulla linea di comando. - -dist-upgrade -Dist-upgrade fa un aggiornamento completo, progettato in modo da rendere -semplici gli aggiornamenti tra versioni di Debian. Usa un algoritmo -sofisticato per determinare il miglior insieme di pacchetti da installare, -aggiornare e rimuovere per arrivare alla versione più aggiornata -del sistema possibile. In alcune situazioni può essere vantaggioso usare -dist-upgrade invece che sprecare tempo a risolvere manualmente le -dipendenze con dselect. Una volta completato dist-upgrade, si può -usare dselect per installare eventuali pacchetti che sono stati -tralasciati. - -

-È importante controllare attentamente cosa intende fare dist-upgrade, -dato che le sue decisioni a volte possono essere abbastanza sorprendenti. - - -

-apt-get ha diverse opzioni a linea di comando, che vengono -documentate dettagliatamente nella sua pagina man, -. L'opzione più utile è --d, che non installa i file scaricati: se il sistema deve -scaricare un gran numero di pacchetti, non è bene farglieli installare -subito, in caso dovesse andare male qualcosa. Dopo aver usato -d, -gli archivi scaricati possono essere installati semplicemente dando di -nuovo lo stesso comando senza l'opzione -d. - - - - - -DSelect -

-Il metodo APT di dselect fornisce tutte le funzionalità di APT -all'interno dell'interfaccia grafica di selezione dei pacchetti -dselect. dselect viene usato per selezionare i pacchetti -da installare o rimuovere, ed APT li installa. - -

-Per abilitare il metodo APT dovete selezionare [A]ccess in dselect -e scegliere il metodo APT; vi verrà chiesto un insieme di fonti -(Sources), cioè di posti da cui scaricare gli archivi. -Tali fonti possono essere siti Internet remoti, mirror locali di Debian -o CDROM; ciascuna di esse può fornire una parte dell'archivio Debian, -ed APT le combinerà insieme in un set completo di pacchetti. Se avete un -CDROM è una buona idea indicare quello per primo, e poi i mirror, in modo -da avere accesso alle ultime versioni; APT userà in questo modo automaticamente -i pacchetti sul CDROM prima di scaricarli da Internet. - -

- - Set up a list of distribution source locations - - Please give the base URL of the debian distribution. - The access schemes I know about are: http file - - For example: - file:/mnt/debian, - ftp://ftp.debian.org/debian, - http://ftp.de.debian.org/debian, - - - URL [http://llug.sep.bnl.gov/debian]: - - -

-La configurazione delle fonti inizia chiedendo la base dell'archivio Debian, -propone come default un mirror HTTP, e poi chiede la distribuzione -da scaricare. - -

- - Please give the distribution tag to get or a path to the - package file ending in a /. The distribution - tags are typically something like: stable unstable testing non-US - - Distribution [stable]: - - -

-La distribuzione (``distribution'') fa riferimento alla versione Debian -dell'archivio: stable è l'ultima rilasciata, ed unstable -è quella di sviluppo. non-US è disponibile solo su alcuni mirror, -e contiene dei pacchetti in cui viene usata della tecnologia di criptazione -o altre cose che non possano essere esportate dagli Stati Uniti; importare -questi pacchetti negli US è però legale. - -

- - Please give the components to get - The components are typically something like: main contrib non-free - - Components [main contrib non-free]: - - -

-L'elenco dei componenti (``components'') si riferisce alla lista di -sotto-distribuzioni da scaricare. Ciascuna distribuzione viene divisa in -base al copyright del software: la main contiene pacchetti la cui licenza -soddisfa le DFSG, mentre contrib e non-free contengono software che ha -diverse restrizioni sull'uso e sulla distribuzione. - -

-Si possono inserire un qualsiasi numero di fonti, e lo script di -configurazione continuerà a chiedere fino a che abbiate specificato tutti gli -elementi che volete. - -

-Prima di cominciare ad usare dselect è necessario aggiornare -l'elenco dei pacchetti disponibili selezionando [U]pdate dal menù: -si tratta di un sovrainsieme di ciò che fa apt-get update, -che rende l'informazione scaricata disponibile a -dselect. [U]pdate deve essere fatto anche se prima è stato dato -apt-get update. - -

-Si può a questo punto continuare selezionando i pacchetti desiderati -usando [S]elect e poi installando con [I]nstall. Se si usa il metodo APT, -i comandi [C]onfig e [R]emove non hanno significato, dato che entrambe le -fasi sono contenute in [I]nstall. - -

-Per default APT rimuoverà automaticamente i pacchetti che sono stati installati -con successo. Per modificare questo comportamento, si inserisca -Dselect::clean "prompt"; in /etc/apt/apt.conf. - - - - - -L'interfaccia - -

-Entrambi i metodi, dselect APT ed apt-get, condividono la -stessa interfaccia; si tratta di un sistema semplice che indica in genere -cosa sta per fare, e poi lo fa. - -Il metodo dselect è in realtà un insieme di script di wrapper ad -apt-get. Il metodo fornisce delle funzionalità maggiori del -solo apt-get. - -Dopo la stampa di un riassunto delle operazioni che saranno fatte, -APT stampa dei messaggi informativi sullo stato del sistema, in modo che -possiate avere davanti agli occhi a quale punto dell'operazione si trova, -e quanto ancora si deve aspettare. - - -Avvio - -

-Prima di ciascuna operazione, eccetto l'aggiornamento della lista, APT -compie alcune operazioni per prepararsi, oltre a dei controlli dello -stato del sistema. In qualsiasi momento le stesse operazioni possono essere -fatte con apt-get check -

- -# apt-get check -Reading Package Lists... Done -Building Dependancy Tree... Done - - -

-La prima cosa che fa è leggere tutti i file dei pacchetti in memoria, -usando uno schema di caching in modo da rendere la stessa operazione più -veloce la seconda volta che la si fa. Se alcuni dei file dei pacchetti -non vengono trovati, sono ignorati e viene stampato un avvertimento -all'uscita di apt-get. - -

-L'operazione finale consiste in un'analisi dettagliata delle -dipendenze del sistema: viene controllato che tutte le dipendenze dei -singoli pacchetti installati o non scompattati siano soddisfatte. -Se vengono individuati dei problemi, viene stampato un resoconto, -ed apt-get esce senza eseguire alcuna operazione. - -

- -# apt-get check -Reading Package Lists... Done -Building Dependancy Tree... Done -You might want to run apt-get -f install' to correct these. -Sorry, but the following packages have unmet dependencies: - 9fonts: Depends: xlib6g but it is not installed - uucp: Depends: mailx but it is not installed - blast: Depends: xlib6g (>= 3.3-5) but it is not installed - adduser: Depends: perl-base but it is not installed - aumix: Depends: libgpmg1 but it is not installed - debiandoc-sgml: Depends: sgml-base but it is not installed - bash-builtins: Depends: bash (>= 2.01) but 2.0-3 is installed - cthugha: Depends: svgalibg1 but it is not installed - Depends: xlib6g (>= 3.3-5) but it is not installed - libreadlineg2: Conflicts:libreadline2 (<< 2.1-2.1) - - -

-In questo esempio il sistema ha molti problemi, tra cui uno piuttosto serio -con la libreadlineg2. Per ciascun pacchetto che ha dipendenze non soddisfatte, -viene stampata una linea che indica il pacchetto che crea il problema e -quali problemi ci sono. Viene inclusa inoltre una breve spiegazione -del perché il pacchetto ha un problema di dipendenze. - -

-Ci sono due modi in cui un sistema possa arrivare in uno stato problematico -di questo genere: il primo è causato dal fatto che dpkg possa -mancare alcune relazioni sottili tra pacchetti durante un aggiornamento -del sistemaAPT considera comunque tutte le dipendenze note, -e cerca di prevenire problemi ai pacchetti; il secondo è possibile -se l'installazione di un pacchetto fallisce, ed in questo caso è possibile -che un pacchetto venga scompattato senza che tutti quelli da cui dipende -siano stati installati. - -

-La seconda possibilità è meno seria della prima, dato che APT gestisce -l'ordine di installazione dei pacchetti; in entrambi i casi l'opzione --f di apt-get gli farà trovare una soluzione e lo farà -continuare. Il metodo APT di dselect comprende sempre l'opzione --f per permettere di configurare facilmente anche i pacchetti con -script errati. - -

-Se viene usata però l'opzione -f per correggere un sistema in uno -stato molto problematico, è possibile che anche con l'opzione il programma -fallisca, subito o durante la sequenza di installazione. In entrambi i casi -è necessario usare dpkg a mano (probabilmente usando delle opzioni -di forzatura) per correggere quanto basta per poter fare continuare APT. - - - -Il resoconto sullo stato - -

-Prima di procedere, apt-get presenterà un resoconto delle operazioni -che sta per fare. In genere tale resoconto varierà con il tipo di operazioni -da fare, ma ci sono alcuni elementi comuni: in tutti i casi gli elenchi -dipendono dallo stato finale delle cose, e tengono conto dell'opzione --f e di altre attività rilevanti per il comando da eseguire. - -L'elenco dei pacchetti Extra -

- -The following extra packages will be installed: - libdbd-mysql-perl xlib6 zlib1 xzx libreadline2 libdbd-msql-perl - mailpgp xdpkg fileutils pinepgp zlib1g xlib6g perl-base - bin86 libgdbm1 libgdbmg1 quake-lib gmp2 bcc xbuffy - squake pgp-i python-base debmake ldso perl libreadlineg2 - ssh - - -

-L'elenco dei pacchetti Extra mostra tutti i pacchetti che verranno installati -o aggiornati oltre a quelli indicati sulla linea di comando. Viene generato -solo per il comando install. I pacchetti elencati sono spesso il -risultato di un'operazione di auto installazione (Auto Install). - - -I pacchetti da rimuovere -

- -The following packages will be REMOVED: - xlib6-dev xpat2 tk40-dev xkeycaps xbattle xonix - xdaliclock tk40 tk41 xforms0.86 ghostview xloadimage xcolorsel - xadmin xboard perl-debug tkined xtetris libreadline2-dev perl-suid - nas xpilot xfig - - -

-L'elenco dei pacchetti da rimuovere (Remove) indica tutti i pacchetti che -verranno rimossi dal sistema. Può essere mostrato per una qualsiasi delle -operazioni, e deve sempre essere esaminato attentamente per assicurarsi -che non venga eliminato qualcosa di importante. Con l'opzione -f -è particolarmente probabile che vengano eliminati dei pacchetti, ed in questo -caso va fatta estrema attenzione. La lista può contenere dei pacchetti -che verranno rimossi perché sono già rimossi parzialmente, forse a causa -di un'installazione non terminata correttamente. - - -L'elenco dei nuovi pacchetti installati -

- -The following NEW packages will installed: - zlib1g xlib6g perl-base libgdbmg1 quake-lib gmp2 pgp-i python-base - - -

-L'elenco dei nuovi pacchetti installati (New) è semplicemente un appunto -su quello che accadrà. I pacchetti nell'elenco non sono al momento installati -nel sistema, ma lo saranno alla fine delle operazioni di APT. - - -L'elenco dei pacchetti trattenuti -

- -The following packages have been kept back - compface man-db tetex-base msql libpaper svgalib1 - gs snmp arena lynx xpat2 groff xscreensaver - - -

-In ogni caso in cui il sistema viene aggiornato nel suo insieme, c'è la -possibilità che non possano venire installate nuove versioni di alcuni -pacchetti, dato che potrebbero richiedere l'installazione di pacchetti non -presenti nel sistema, o entrare in conflitto con altri già presenti. -In questo caso, il pacchetto viene elencato nella lista di quelli -trattenuti (Kept Back). Il miglior modo per convincere i pacchetti -elencati in questa lista è di installarli con apt-get install o -usare dselect per risolvere i problemi. - - -Messaggi di attenzione sui pacchetti trattenuti -

- -The following held packages will be changed: - cvs - - -

-A volte si può richiedere ad APT di installare un pacchetto -che è stato trattenuto; in questi casi viene stampato un messaggio di -attenzione, che avverte che il pacchetto verrà modificato. Questo -dovrebbe accadere solo durante operazioni di dist-upgrade o di install. - - -Resoconto finale -

-Infine, APT stamperà un riassunto di tutte le modifiche che accadranno. - -

- -206 packages upgraded, 8 newly installed, 23 to remove and 51 not upgraded. -12 packages not fully installed or removed. -Need to get 65.7M/66.7M of archives. After unpacking 26.5M will be used. - - -

-La prima linea del riassunto è semplicemente una versione ridotta di tutte -le liste, ed include il numero di aggiornamenti -- cioè dei pacchetti -già installati per cui sono disponibili nuove versioni. La seconda -linea indica il numero di pacchetti con problemi di configurazione, -probabilmente in conseguenza di un'installazione non andata a buon fine. -La linea finale indica i requisiti di spazio dell'installazione: i primi -due numeri indicano rispettivamente il numero di byte che devono -essere trasferiti da posizioni remote, ed il secondo la dimensione totale -di tutti gli archivi necessari per l'installazione. Il numero successivo -indica la differenza in dimensione tra i pacchetti già installati -e quelli che lo saranno, ed è approssimativamente equivalente allo spazio -richiesto in /usr dopo l'installazione. Se si stanno rimuovendo dei -pacchetti, il valore può indicare lo spazio che verrà liberato. - -

-Si possono generare altri resoconti usando l'opzione -u per mostrare -i pacchetti da aggiornare, ma sono simili all'esempio precedente. - - - -La visualizzazione dello stato -

-Durante il download degli archivi e dei file dei pacchetti, APT -stampa una serie di messaggi di stato. - -

- -# apt-get update -Get:1 http://ftp.de.debian.org/debian-non-US/ stable/non-US/ Packages -Get:2 http://llug.sep.bnl.gov/debian/ testing/contrib Packages -Hit http://llug.sep.bnl.gov/debian/ testing/main Packages -Get:4 http://ftp.de.debian.org/debian-non-US/ unstable/binary-i386/ Packages -Get:5 http://llug.sep.bnl.gov/debian/ testing/non-free Packages -11% [5 testing/non-free `Waiting for file' 0/32.1k 0%] 2203b/s 1m52s - - -

-Le linee che cominciano con Get vengono stampate quando APT inizia -a scaricare un file, e l'ultima linea indica il progresso dell'operazione. -Il primo valore in percentuale indica la percentuale totale di tutti i file; -dato che la dimensione dei file Package non è nota, purtroppo a volte -apt-get update fa una stima poco accurata. - -

-La sezione successiva della linea di stato viene ripetuta una volta per -ciascuna fase del download, ed indica l'operazione in corso, insieme -ad alcune informazioni utili su cosa stia accadendo. A volte questa -sezione contiene solamente Forking, che significa che il sistema -operativo sta caricando il modulo. La prima parola dopo la parentesi quadra -aperta è il nome breve dell'oggetto che si sta scaricando, che per gli archivi -è il nome del pacchetto. - -

-All'interno delle virgolette c'è una stringa informativa, che indica il -progresso della fase di negoziazione del download. Tipicamente comincia con -Connecting, procede con Waiting for file e poi con -Downloading o Resuming. Il valore finale è il numero di byte -che sono stati scaricati dal sito remoto: una volta cominciato il -download viene rappresentato come 102/10.2k, che indica che -sono stati scaricati 102 byte di 10.2 kilobyte. La dimensione totale -viene sempre espressa in notazione a quattro cifre, per risparmiare -spazio. Dopo la dimensione viene indicato un indicatore -progressivo della percentuale del file. Il penultimo elemento è la velocità -istantanea media, che viene aggiornata ogni 5 secondi, e riflette la -velocità di trasferimento dei dati in quel periodo. Infine, viene -visualizzato il tempo stimato per il trasferimento, che viene aggiornato -periodicamente e riflette il tempo necessario per completare tutte le -operazioni alla velocità di trasferimento mostrata. - -

-La visualizzazione dello stato viene aggiornata ogni mezzo secondo per -fornire un feedback costante del processo di download, e le linee Get -scorrono indietro quando viene cominciato il download di un nuovo file. -Dato che la visualizzazione dello stato viene costantemente -aggiornata, non è adatta per essere registrata in un file; per non -visualizzarla si può usare l'opzione -q. - - - -Dpkg - -

-APT usa dpkg per installare gli archivi e passerà all'interfaccia -dpkg una volta finito il download. -dpkg porrà anche alcune domande durante la manipolazione dei -pacchetti, ed i pacchetti stessi -potranno farne altre. Prima di ciascuna domanda viene -proposta una descrizione di quello che sta per chiedere, e le domande -sono troppo diverse per poter essere discusse in maniera completa in questa -occasione. - - - - - - diff --git a/doc/po/it.po b/doc/po/it.po new file mode 100644 index 000000000..2722ca562 --- /dev/null +++ b/doc/po/it.po @@ -0,0 +1,8339 @@ +# Translation of apt package man pages +# Copyright (C) 2000 Debian Italian l10n team +# This file is distributed under the same license as the apt package. +# +# Translators: +# Eugenia Franzoni , 2000 +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: \n" +"POT-Creation-Date: 2009-10-29 14:19+0100\n" +"PO-Revision-Date: 2003-04-26 23:26+0100\n" +"Last-Translator: Traduzione di Eugenia Franzoni \n" +"Language-Team: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. type: TH +#: apt.8:17 +#, no-wrap +msgid "apt" +msgstr "apt" + +#. type: TH +#: apt.8:17 +#, no-wrap +msgid "16 June 1998" +msgstr "" + +#. type: TH +#: apt.8:17 +#, no-wrap +msgid "Debian GNU/Linux" +msgstr "" + +#. type: SH +#: apt.8:18 +#, no-wrap +msgid "NAME" +msgstr "" + +#. type: Plain text +#: apt.8:20 +msgid "apt - Advanced Package Tool" +msgstr "" + +#. type: SH +#: apt.8:20 +#, no-wrap +msgid "SYNOPSIS" +msgstr "" + +#. type: Plain text +#: apt.8:22 +msgid "B" +msgstr "" + +#. type: SH +#: apt.8:22 +#, no-wrap +msgid "DESCRIPTION" +msgstr "" + +#. type: Plain text +#: apt.8:31 +msgid "" +"APT is a management system for software packages. For normal day to day " +"package management there are several frontends available, such as B" +"(8) for the command line or B(8) for the X Window System. Some " +"options are only implemented in B(8) though." +msgstr "" + +#. type: SH +#: apt.8:31 +#, no-wrap +msgid "OPTIONS" +msgstr "" + +#. type: Plain text +#: apt.8:33 apt.8:35 +msgid "None." +msgstr "" + +#. type: SH +#: apt.8:33 +#, no-wrap +msgid "FILES" +msgstr "" + +#. type: SH +#: apt.8:35 +#, no-wrap +msgid "SEE ALSO" +msgstr "" + +#. type: Plain text +#: apt.8:42 +msgid "" +"B(8), B(8), B(5), B(5), " +"B(5), B(8)" +msgstr "" + +#. type: SH +#: apt.8:42 +#, no-wrap +msgid "DIAGNOSTICS" +msgstr "" + +#. type: Plain text +#: apt.8:44 +msgid "apt returns zero on normal operation, decimal 100 on error." +msgstr "" + +#. type: SH +#: apt.8:44 +#, no-wrap +msgid "BUGS" +msgstr "" + +#. type: Plain text +#: apt.8:46 +msgid "This manpage isn't even started." +msgstr "" + +#. type: Plain text +#: apt.8:55 +msgid "" +"See Ehttp://bugs.debian.org/aptE. If you wish to report a bug in " +"B, please see I or the " +"B(1) command." +msgstr "" + +#. type: SH +#: apt.8:55 +#, no-wrap +msgid "AUTHOR" +msgstr "" + +#. type: Plain text +#: apt.8:56 +msgid "apt was written by the APT team Eapt@packages.debian.orgE." +msgstr "" + +#. type: Plain text +#: apt.ent:2 +msgid "" +msgstr "" + +#. type: Plain text +#: apt.ent:10 +msgid "" +" &docdir;examples/configure-index.gz\"> /etc/apt.conf\"> " +msgstr "" + +#. type: Plain text +#: apt.ent:17 +#, no-wrap +msgid "" +"\n" +"\n" +" apt.conf\n" +" 5\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:23 +#, no-wrap +msgid "" +"\n" +" apt-get\n" +" 8\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:29 +#, no-wrap +msgid "" +"\n" +" apt-config\n" +" 8\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:35 +#, no-wrap +msgid "" +"\n" +" apt-cdrom\n" +" 8\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:41 +#, no-wrap +msgid "" +"\n" +" apt-cache\n" +" 8\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:47 +#, no-wrap +msgid "" +"\n" +" apt_preferences\n" +" 5\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:53 +#, no-wrap +msgid "" +"\n" +" apt-key\n" +" 8\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:59 +#, no-wrap +msgid "" +"\n" +" apt-secure\n" +" 8\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:65 +#, no-wrap +msgid "" +"\n" +" apt-ftparchive\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:72 +#, no-wrap +msgid "" +"\n" +" sources.list\n" +" 5\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:78 +#, no-wrap +msgid "" +"\n" +" reportbug\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:84 +#, no-wrap +msgid "" +"\n" +" dpkg\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:90 +#, no-wrap +msgid "" +"\n" +" dpkg-buildpackage\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:96 +#, no-wrap +msgid "" +"\n" +" gzip\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:102 +#, no-wrap +msgid "" +"\n" +" dpkg-scanpackages\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:108 +#, no-wrap +msgid "" +"\n" +" dpkg-scansources\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:114 +#, no-wrap +msgid "" +"\n" +" dselect\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:120 +#, no-wrap +msgid "" +"\n" +" aptitude\n" +" 8\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:126 +#, no-wrap +msgid "" +"\n" +" synaptic\n" +" 8\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:132 +#, no-wrap +msgid "" +"\n" +" debsign\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:138 +#, no-wrap +msgid "" +"\n" +" debsig-verify\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:144 +#, no-wrap +msgid "" +"\n" +" gpg\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:150 +#, no-wrap +msgid "" +"\n" +" gnome-apt\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:156 +#, no-wrap +msgid "" +"\n" +" wajig\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:168 +#, no-wrap +msgid "" +"\n" +"\n" +"

apt@packages.debian.org
\n" +" \n" +" Jason Gunthorpe\n" +" \n" +" \n" +" 1998-2001 Jason Gunthorpe\n" +" 28 October 2008\n" +" Linux\n" +msgstr "" + +#. type: Plain text +#: apt.ent:171 +#, no-wrap +msgid "" +" \n" +"\"> \n" +msgstr "" + +#. type: Plain text +#: apt.ent:177 +#, no-wrap +msgid "" +"\n" +" apt@packages.debian.org\n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:185 +#, no-wrap +msgid "" +"\n" +" Jason\n" +" Gunthorpe\n" +" \n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:193 +#, no-wrap +msgid "" +"\n" +" Mike\n" +" O'Connor\n" +" \n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:200 +#, no-wrap +msgid "" +"\n" +" APT team\n" +" \n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:204 apt.ent:215 +#, no-wrap +msgid "" +"Linux\n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:211 +#, no-wrap +msgid "" +"\n" +" Jason Gunthorpe\n" +" 1998-2001\n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:221 +#, no-wrap +msgid "" +"\n" +"\t\tQA Page\n" +"\t\n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:232 +#, no-wrap +msgid "" +"\n" +"Bugs\n" +" APT bug page. \n" +" If you wish to report a bug in APT, please see\n" +" /usr/share/doc/debian/bug-reporting.txt or the\n" +" &reportbug; command.\n" +" \n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:240 +#, no-wrap +msgid "" +"\n" +"Author\n" +" APT was written by the APT team apt@packages.debian.org.\n" +" \n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:250 +#, no-wrap +msgid "" +"\n" +"\n" +" \n" +" Show a short usage summary.\n" +" \n" +" \n" +" \n" +msgstr "" + +#. type: Plain text +#: apt.ent:258 +#, no-wrap +msgid "" +" \n" +" \n" +" \n" +" Show the program version.\n" +" \n" +" \n" +" \n" +msgstr "" + +#. type: Plain text +#: apt.ent:268 +#, no-wrap +msgid "" +" \n" +" \n" +" \n" +" Configuration File; Specify a configuration file to use. \n" +" The program will read the default configuration file and then this \n" +" configuration file. See &apt-conf; for syntax information. \n" +" \n" +" \n" +" \n" +msgstr "" + +#. type: Plain text +#: apt.ent:280 +#, no-wrap +msgid "" +" \n" +" \n" +" \n" +" Set a Configuration Option; This will set an arbitrary\n" +" configuration option. The syntax is .\n" +" and can be used multiple\n" +" times to set different options.\n" +" \n" +" \n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:291 +#, no-wrap +msgid "" +"\n" +"All command line options may be set using the configuration file, the\n" +" descriptions indicate the configuration option to set. For boolean\n" +" options you can override the config file by using something like \n" +" ,, \n" +" or several other variations.\n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:297 +#, no-wrap +msgid "" +"/etc/apt/apt.conf\n" +" APT configuration file.\n" +" Configuration Item: Dir::Etc::Main.\n" +" \n" +msgstr "" + +#. type: Plain text +#: apt.ent:303 +#, no-wrap +msgid "" +" /etc/apt/apt.conf.d/\n" +" APT configuration file fragments.\n" +" Configuration Item: Dir::Etc::Parts.\n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:309 +#, no-wrap +msgid "" +"&cachedir;/archives/\n" +" Storage area for retrieved package files.\n" +" Configuration Item: Dir::Cache::Archives.\n" +" \n" +msgstr "" + +#. type: Plain text +#: apt.ent:315 +#, no-wrap +msgid "" +" &cachedir;/archives/partial/\n" +" Storage area for package files in transit.\n" +" Configuration Item: Dir::Cache::Archives (implicit partial). \n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:325 +#, no-wrap +msgid "" +"/etc/apt/preferences\n" +" Version preferences file.\n" +" This is where you would specify "pinning",\n" +" i.e. a preference to get certain packages\n" +" from a separate source\n" +" or from a different version of a distribution.\n" +" Configuration Item: Dir::Etc::Preferences.\n" +" \n" +msgstr "" + +#. type: Plain text +#: apt.ent:331 +#, no-wrap +msgid "" +" /etc/apt/preferences.d/\n" +" File fragments for the version preferences.\n" +" Configuration Item: Dir::Etc::PreferencesParts.\n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:337 +#, no-wrap +msgid "" +"/etc/apt/sources.list\n" +" Locations to fetch packages from.\n" +" Configuration Item: Dir::Etc::SourceList.\n" +" \n" +msgstr "" + +#. type: Plain text +#: apt.ent:343 +#, no-wrap +msgid "" +" /etc/apt/sources.list.d/\n" +" File fragments for locations to fetch packages from.\n" +" Configuration Item: Dir::Etc::SourceParts.\n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:350 +#, no-wrap +msgid "" +"&statedir;/lists/\n" +" Storage area for state information for each package resource specified in\n" +" &sources-list;\n" +" Configuration Item: Dir::State::Lists.\n" +" \n" +msgstr "" + +#. type: Plain text +#: apt.ent:355 +#, no-wrap +msgid "" +" &statedir;/lists/partial/\n" +" Storage area for state information in transit.\n" +" Configuration Item: Dir::State::Lists (implicit partial).\n" +" \n" +"\">\n" +msgstr "" + +#. The last update date +#. type: Content of: +#: apt-cache.8.xml:13 apt-config.8.xml:13 apt-extracttemplates.1.xml:13 +#: apt-ftparchive.1.xml:13 apt-sortpkgs.1.xml:13 sources.list.5.xml:13 +msgid "" +"&apt-author.jgunthorpe; &apt-author.team; &apt-email; &apt-product; 29 " +"February 2004" +msgstr "" + +#. type: Content of: +#: apt-cache.8.xml:22 apt-cache.8.xml:29 +#, fuzzy +msgid "apt-cache" +msgstr "apt-get" + +#. type: Content of: +#: apt-cache.8.xml:23 apt-cdrom.8.xml:22 apt-config.8.xml:23 apt-get.8.xml:23 +#: apt-key.8.xml:15 apt-mark.8.xml:23 apt-secure.8.xml:15 +msgid "8" +msgstr "" + +#. type: Content of: +#: apt-cache.8.xml:24 apt-cdrom.8.xml:23 apt-config.8.xml:24 +#: apt-extracttemplates.1.xml:24 apt-ftparchive.1.xml:24 apt-get.8.xml:24 +#: apt-key.8.xml:16 apt-mark.8.xml:24 apt-secure.8.xml:16 +#: apt-sortpkgs.1.xml:24 apt.conf.5.xml:30 apt_preferences.5.xml:23 +#: sources.list.5.xml:24 +msgid "APT" +msgstr "" + +#. type: Content of: +#: apt-cache.8.xml:30 +msgid "APT package handling utility -- cache manipulator" +msgstr "" + +#. type: Content of: +#: apt-cache.8.xml:36 +msgid "" +"apt-cache " +"add file gencaches showpkg pkg " +"showsrc pkg stats dump dumpavail unmet search regex show pkg depends pkg " +"rdepends pkg pkgnames prefix dotty pkg " +"xvcg pkg policy pkgs madison pkgs " +msgstr "" + +#. type: Content of: +#: apt-cache.8.xml:62 apt-cdrom.8.xml:47 apt-config.8.xml:47 +#: apt-extracttemplates.1.xml:43 apt-ftparchive.1.xml:55 apt-get.8.xml:125 +#: apt-key.8.xml:34 apt-mark.8.xml:52 apt-secure.8.xml:40 +#: apt-sortpkgs.1.xml:44 apt.conf.5.xml:39 apt_preferences.5.xml:33 +#: sources.list.5.xml:33 +msgid "Description" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cache.8.xml:63 +msgid "" +"<command>apt-cache</command> performs a variety of operations on APT's " +"package cache. <command>apt-cache</command> does not manipulate the state of " +"the system but does provide operations to search and generate interesting " +"output from the package metadata." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cache.8.xml:68 apt-get.8.xml:131 +msgid "" +"Unless the <option>-h</option>, or <option>--help</option> option is given, " +"one of the commands below must be present." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:72 +msgid "add <replaceable>file(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:73 +msgid "" +"<literal>add</literal> adds the named package index files to the package " +"cache. This is for debugging only." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:77 +msgid "gencaches" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:78 +msgid "" +"<literal>gencaches</literal> performs the same operation as <command>apt-get " +"check</command>. It builds the source and package caches from the sources in " +"&sources-list; and from <filename>/var/lib/dpkg/status</filename>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:84 +msgid "showpkg <replaceable>pkg(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:85 +msgid "" +"<literal>showpkg</literal> displays information about the packages listed on " +"the command line. Remaining arguments are package names. The available " +"versions and reverse dependencies of each package listed are listed, as well " +"as forward dependencies for each version. Forward (normal) dependencies are " +"those packages upon which the package in question depends; reverse " +"dependencies are those packages that depend upon the package in question. " +"Thus, forward dependencies must be satisfied for a package, but reverse " +"dependencies need not be. For instance, <command>apt-cache showpkg " +"libreadline2</command> would produce output similar to the following:" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><informalexample><programlisting> +#: apt-cache.8.xml:97 +#, no-wrap +msgid "" +"Package: libreadline2\n" +"Versions: 2.1-12(/var/state/apt/lists/foo_Packages),\n" +"Reverse Depends: \n" +" libreadlineg2,libreadline2\n" +" libreadline2-altdev,libreadline2\n" +"Dependencies:\n" +"2.1-12 - libc5 (2 5.4.0-0) ncurses3.0 (0 (null))\n" +"Provides:\n" +"2.1-12 - \n" +"Reverse Provides: \n" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:109 +msgid "" +"Thus it may be seen that libreadline2, version 2.1-12, depends on libc5 and " +"ncurses3.0 which must be installed for libreadline2 to work. In turn, " +"libreadlineg2 and libreadline2-altdev depend on libreadline2. If " +"libreadline2 is installed, libc5 and ncurses3.0 (and ldso) must also be " +"installed; libreadlineg2 and libreadline2-altdev do not have to be " +"installed. For the specific meaning of the remainder of the output it is " +"best to consult the apt source code." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:118 +msgid "stats" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:118 +msgid "" +"<literal>stats</literal> displays some statistics about the cache. No " +"further arguments are expected. Statistics reported are:" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:121 +msgid "" +"<literal>Total package names</literal> is the number of package names found " +"in the cache." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:125 +msgid "" +"<literal>Normal packages</literal> is the number of regular, ordinary " +"package names; these are packages that bear a one-to-one correspondence " +"between their names and the names used by other packages for them in " +"dependencies. The majority of packages fall into this category." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:131 +msgid "" +"<literal>Pure virtual packages</literal> is the number of packages that " +"exist only as a virtual package name; that is, packages only \"provide\" the " +"virtual package name, and no package actually uses the name. For instance, " +"\"mail-transport-agent\" in the Debian GNU/Linux system is a pure virtual " +"package; several packages provide \"mail-transport-agent\", but there is no " +"package named \"mail-transport-agent\"." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:139 +msgid "" +"<literal>Single virtual packages</literal> is the number of packages with " +"only one package providing a particular virtual package. For example, in the " +"Debian GNU/Linux system, \"X11-text-viewer\" is a virtual package, but only " +"one package, xless, provides \"X11-text-viewer\"." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:145 +msgid "" +"<literal>Mixed virtual packages</literal> is the number of packages that " +"either provide a particular virtual package or have the virtual package name " +"as the package name. For instance, in the Debian GNU/Linux system, \"debconf" +"\" is both an actual package, and provided by the debconf-tiny package." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:152 +msgid "" +"<literal>Missing</literal> is the number of package names that were " +"referenced in a dependency but were not provided by any package. Missing " +"packages may be an evidence if a full distribution is not accessed, or if a " +"package (real or virtual) has been dropped from the distribution. Usually " +"they are referenced from Conflicts or Breaks statements." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:159 +msgid "" +"<literal>Total distinct</literal> versions is the number of package versions " +"found in the cache; this value is therefore at least equal to the number of " +"total package names. If more than one distribution (both \"stable\" and " +"\"unstable\", for instance), is being accessed, this value can be " +"considerably larger than the number of total package names." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:166 +msgid "" +"<literal>Total dependencies</literal> is the number of dependency " +"relationships claimed by all of the packages in the cache." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:173 +msgid "showsrc <replaceable>pkg(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:174 +msgid "" +"<literal>showsrc</literal> displays all the source package records that " +"match the given package names. All versions are shown, as well as all " +"records that declare the name to be a Binary." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:179 apt-config.8.xml:84 +msgid "dump" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:180 +msgid "" +"<literal>dump</literal> shows a short listing of every package in the cache. " +"It is primarily for debugging." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:184 +msgid "dumpavail" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:185 +msgid "" +"<literal>dumpavail</literal> prints out an available list to stdout. This is " +"suitable for use with &dpkg; and is used by the &dselect; method." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:189 +msgid "unmet" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:190 +msgid "" +"<literal>unmet</literal> displays a summary of all unmet dependencies in the " +"package cache." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:194 +msgid "show <replaceable>pkg(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:195 +msgid "" +"<literal>show</literal> performs a function similar to <command>dpkg --print-" +"avail</command>; it displays the package records for the named packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:200 +msgid "search <replaceable>regex [ regex ... ]</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:201 +msgid "" +"<literal>search</literal> performs a full text search on all available " +"package lists for the POSIX regex pattern given, see " +"<citerefentry><refentrytitle><command>regex</command></refentrytitle> " +"<manvolnum>7</manvolnum></citerefentry>. It searches the package names and " +"the descriptions for an occurrence of the regular expression and prints out " +"the package name and the short description, including virtual package " +"names. If <option>--full</option> is given then output identical to " +"<literal>show</literal> is produced for each matched package, and if " +"<option>--names-only</option> is given then the long description is not " +"searched, only the package name is." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:214 +msgid "" +"Separate arguments can be used to specify multiple search patterns that are " +"and'ed together." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:218 +msgid "depends <replaceable>pkg(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:219 +msgid "" +"<literal>depends</literal> shows a listing of each dependency a package has " +"and all the possible other packages that can fulfill that dependency." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:223 +msgid "rdepends <replaceable>pkg(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:224 +msgid "" +"<literal>rdepends</literal> shows a listing of each reverse dependency a " +"package has." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:228 +msgid "pkgnames <replaceable>[ prefix ]</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:229 +msgid "" +"This command prints the name of each package APT knows. The optional " +"argument is a prefix match to filter the name list. The output is suitable " +"for use in a shell tab complete function and the output is generated " +"extremely quickly. This command is best used with the <option>--generate</" +"option> option." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:234 +msgid "" +"Note that a package which APT knows of is not necessarily available to " +"download, installable or installed, e.g. virtual packages are also listed in " +"the generated list." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:239 +msgid "dotty <replaceable>pkg(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:240 +msgid "" +"<literal>dotty</literal> takes a list of packages on the command line and " +"generates output suitable for use by dotty from the <ulink url=\"http://www." +"research.att.com/sw/tools/graphviz/\">GraphViz</ulink> package. The result " +"will be a set of nodes and edges representing the relationships between the " +"packages. By default the given packages will trace out all dependent " +"packages; this can produce a very large graph. To limit the output to only " +"the packages listed on the command line, set the <literal>APT::Cache::" +"GivenOnly</literal> option." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:249 +msgid "" +"The resulting nodes will have several shapes; normal packages are boxes, " +"pure provides are triangles, mixed provides are diamonds, missing packages " +"are hexagons. Orange boxes mean recursion was stopped [leaf packages], blue " +"lines are pre-depends, green lines are conflicts." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:254 +msgid "Caution, dotty cannot graph larger sets of packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:257 +msgid "xvcg <replaceable>pkg(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:258 +msgid "" +"The same as <literal>dotty</literal>, only for xvcg from the <ulink url=" +"\"http://rw4.cs.uni-sb.de/users/sander/html/gsvcg1.html\">VCG tool</ulink>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:262 +msgid "policy <replaceable>[ pkg(s) ]</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:263 +msgid "" +"<literal>policy</literal> is meant to help debug issues relating to the " +"preferences file. With no arguments it will print out the priorities of each " +"source. Otherwise it prints out detailed information about the priority " +"selection of the named package." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:269 +msgid "madison <replaceable>/[ pkg(s) ]</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:270 +msgid "" +"<literal>apt-cache</literal>'s <literal>madison</literal> command attempts " +"to mimic the output format and a subset of the functionality of the Debian " +"archive management tool, <literal>madison</literal>. It displays available " +"versions of a package in a tabular format. Unlike the original " +"<literal>madison</literal>, it can only display information for the " +"architecture for which APT has retrieved package lists (<literal>APT::" +"Architecture</literal>)." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:281 apt-config.8.xml:93 apt-extracttemplates.1.xml:56 +#: apt-ftparchive.1.xml:492 apt-get.8.xml:319 apt-mark.8.xml:89 +#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:456 apt.conf.5.xml:478 +msgid "options" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:285 +msgid "<option>-p</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:285 +msgid "<option>--pkg-cache</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:286 +msgid "" +"Select the file to store the package cache. The package cache is the primary " +"cache used by all operations. Configuration Item: <literal>Dir::Cache::" +"pkgcache</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:291 apt-ftparchive.1.xml:535 apt-get.8.xml:376 +#: apt-sortpkgs.1.xml:58 +msgid "<option>-s</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:291 +msgid "<option>--src-cache</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:292 +msgid "" +"Select the file to store the source cache. The source is used only by " +"<literal>gencaches</literal> and it stores a parsed version of the package " +"information from remote sources. When building the package cache the source " +"cache is used to avoid reparsing all of the package files. Configuration " +"Item: <literal>Dir::Cache::srcpkgcache</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:299 apt-ftparchive.1.xml:509 apt-get.8.xml:366 +msgid "<option>-q</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:299 apt-ftparchive.1.xml:509 apt-get.8.xml:366 +msgid "<option>--quiet</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:300 +msgid "" +"Quiet; produces output suitable for logging, omitting progress indicators. " +"More q's will produce more quietness up to a maximum of 2. You can also use " +"<option>-q=#</option> to set the quietness level, overriding the " +"configuration file. Configuration Item: <literal>quiet</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:306 +msgid "<option>-i</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:306 +msgid "<option>--important</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:307 +msgid "" +"Print only important dependencies; for use with unmet and depends. Causes " +"only Depends and Pre-Depends relations to be printed. Configuration Item: " +"<literal>APT::Cache::Important</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:312 apt-cdrom.8.xml:121 apt-get.8.xml:333 +msgid "<option>-f</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:312 +msgid "<option>--full</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:313 +msgid "" +"Print full package records when searching. Configuration Item: " +"<literal>APT::Cache::ShowFull</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:317 apt-cdrom.8.xml:131 +msgid "<option>-a</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:317 +msgid "<option>--all-versions</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:318 +msgid "" +"Print full records for all available versions. This is the default; to turn " +"it off, use <option>--no-all-versions</option>. If <option>--no-all-" +"versions</option> is specified, only the candidate version will displayed " +"(the one which would be selected for installation). This option is only " +"applicable to the <literal>show</literal> command. Configuration Item: " +"<literal>APT::Cache::AllVersions</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:326 +msgid "<option>-g</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:326 +msgid "<option>--generate</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:327 +msgid "" +"Perform automatic package cache regeneration, rather than use the cache as " +"it is. This is the default; to turn it off, use <option>--no-generate</" +"option>. Configuration Item: <literal>APT::Cache::Generate</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:332 +msgid "<option>--names-only</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:332 apt-cdrom.8.xml:139 +msgid "<option>-n</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:333 +msgid "" +"Only search on the package names, not the long descriptions. Configuration " +"Item: <literal>APT::Cache::NamesOnly</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:337 +msgid "<option>--all-names</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:338 +msgid "" +"Make <literal>pkgnames</literal> print all names, including virtual packages " +"and missing dependencies. Configuration Item: <literal>APT::Cache::" +"AllNames</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:343 +msgid "<option>--recurse</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:344 +msgid "" +"Make <literal>depends</literal> and <literal>rdepends</literal> recursive so " +"that all packages mentioned are printed once. Configuration Item: " +"<literal>APT::Cache::RecurseDepends</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:349 +msgid "<option>--installed</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:351 +msgid "" +"Limit the output of <literal>depends</literal> and <literal>rdepends</" +"literal> to packages which are currently installed. Configuration Item: " +"<literal>APT::Cache::Installed</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist> +#: apt-cache.8.xml:356 apt-cdrom.8.xml:150 apt-config.8.xml:98 +#: apt-extracttemplates.1.xml:67 apt-ftparchive.1.xml:547 apt-get.8.xml:554 +#: apt-sortpkgs.1.xml:64 +msgid "&apt-commonoptions;" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-cache.8.xml:361 apt-get.8.xml:559 apt-key.8.xml:138 apt-mark.8.xml:122 +#: apt.conf.5.xml:988 apt_preferences.5.xml:615 +msgid "Files" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist> +#: apt-cache.8.xml:363 +msgid "&file-sourceslist; &file-statelists;" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-cache.8.xml:368 apt-cdrom.8.xml:155 apt-config.8.xml:103 +#: apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:563 apt-get.8.xml:569 +#: apt-key.8.xml:162 apt-mark.8.xml:133 apt-secure.8.xml:181 +#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:994 apt_preferences.5.xml:622 +#: sources.list.5.xml:233 +msgid "See Also" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cache.8.xml:369 +msgid "&apt-conf;, &sources-list;, &apt-get;" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-cache.8.xml:373 apt-cdrom.8.xml:160 apt-config.8.xml:108 +#: apt-extracttemplates.1.xml:78 apt-ftparchive.1.xml:567 apt-get.8.xml:575 +#: apt-mark.8.xml:137 apt-sortpkgs.1.xml:73 +msgid "Diagnostics" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cache.8.xml:374 +msgid "" +"<command>apt-cache</command> returns zero on normal operation, decimal 100 " +"on error." +msgstr "" + +#. type: Content of: <refentry><refentryinfo> +#: apt-cdrom.8.xml:13 +msgid "" +"&apt-author.jgunthorpe; &apt-author.team; &apt-email; &apt-product; <date>14 " +"February 2004</date>" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-cdrom.8.xml:21 apt-cdrom.8.xml:28 +msgid "apt-cdrom" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-cdrom.8.xml:29 +msgid "APT CDROM management utility" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-cdrom.8.xml:35 +msgid "" +"<command>apt-cdrom</command> <arg><option>-hvrmfan</option></arg> " +"<arg><option>-d=<replaceable>cdrom mount point</replaceable></option></arg> " +"<arg><option>-o=<replaceable>config string</replaceable></option></arg> " +"<arg><option>-c=<replaceable>file</replaceable></option></arg> <group> " +"<arg>add</arg> <arg>ident</arg> </group>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cdrom.8.xml:48 +msgid "" +"<command>apt-cdrom</command> is used to add a new CDROM to APTs list of " +"available sources. <command>apt-cdrom</command> takes care of determining " +"the structure of the disc as well as correcting for several possible mis-" +"burns and verifying the index files." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cdrom.8.xml:55 +msgid "" +"It is necessary to use <command>apt-cdrom</command> to add CDs to the APT " +"system, it cannot be done by hand. Furthermore each disk in a multi-cd set " +"must be inserted and scanned separately to account for possible mis-burns." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:65 +msgid "add" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:66 +msgid "" +"<literal>add</literal> is used to add a new disc to the source list. It will " +"unmount the CDROM device, prompt for a disk to be inserted and then procceed " +"to scan it and copy the index files. If the disc does not have a proper " +"<filename>disk</filename> directory you will be prompted for a descriptive " +"title." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:74 +msgid "" +"APT uses a CDROM ID to track which disc is currently in the drive and " +"maintains a database of these IDs in <filename>&statedir;/cdroms.list</" +"filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:81 +msgid "ident" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:82 +msgid "" +"A debugging tool to report the identity of the current disc as well as the " +"stored file name" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cdrom.8.xml:61 +msgid "" +"Unless the <option>-h</option>, or <option>--help</option> option is given " +"one of the commands below must be present. <placeholder type=\"variablelist" +"\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-cdrom.8.xml:91 +msgid "Options" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:95 apt-ftparchive.1.xml:503 apt-get.8.xml:328 +msgid "<option>-d</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:95 +msgid "<option>--cdrom</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:96 +msgid "" +"Mount point; specify the location to mount the cdrom. This mount point must " +"be listed in <filename>/etc/fstab</filename> and properly configured. " +"Configuration Item: <literal>Acquire::cdrom::mount</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:104 +msgid "<option>-r</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:104 +msgid "<option>--rename</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:105 +msgid "" +"Rename a disc; change the label of a disk or override the disks given label. " +"This option will cause <command>apt-cdrom</command> to prompt for a new " +"label. Configuration Item: <literal>APT::CDROM::Rename</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:113 apt-get.8.xml:347 +msgid "<option>-m</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:113 +msgid "<option>--no-mount</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:114 +msgid "" +"No mounting; prevent <command>apt-cdrom</command> from mounting and " +"unmounting the mount point. Configuration Item: <literal>APT::CDROM::" +"NoMount</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:121 +msgid "<option>--fast</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:122 +msgid "" +"Fast Copy; Assume the package files are valid and do not check every " +"package. This option should be used only if <command>apt-cdrom</command> has " +"been run on this disc before and did not detect any errors. Configuration " +"Item: <literal>APT::CDROM::Fast</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:131 +msgid "<option>--thorough</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:132 +msgid "" +"Thorough Package Scan; This option may be needed with some old Debian " +"1.1/1.2 discs that have Package files in strange places. It takes much " +"longer to scan the CD but will pick them all up." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:140 apt-get.8.xml:378 +msgid "<option>--just-print</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:141 apt-get.8.xml:380 +msgid "<option>--recon</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:142 apt-get.8.xml:381 +msgid "<option>--no-act</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:143 +msgid "" +"No Changes; Do not change the &sources-list; file and do not write index " +"files. Everything is still checked however. Configuration Item: " +"<literal>APT::CDROM::NoAct</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cdrom.8.xml:156 +msgid "&apt-conf;, &apt-get;, &sources-list;" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cdrom.8.xml:161 +msgid "" +"<command>apt-cdrom</command> returns zero on normal operation, decimal 100 " +"on error." +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-config.8.xml:22 apt-config.8.xml:29 +msgid "apt-config" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-config.8.xml:30 +msgid "APT Configuration Query program" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-config.8.xml:36 +msgid "" +"<command>apt-config</command> <arg><option>-hv</option></arg> <arg><option>-" +"o=<replaceable>config string</replaceable></option></arg> <arg><option>-" +"c=<replaceable>file</replaceable></option></arg> <group choice=\"req\"> " +"<arg>shell</arg> <arg>dump</arg> </group>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-config.8.xml:48 +msgid "" +"<command>apt-config</command> is an internal program used by various " +"portions of the APT suite to provide consistent configurability. It accesses " +"the main configuration file <filename>/etc/apt/apt.conf</filename> in a " +"manner that is easy to use by scripted applications." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-config.8.xml:53 apt-ftparchive.1.xml:71 +msgid "" +"Unless the <option>-h</option>, or <option>--help</option> option is given " +"one of the commands below must be present." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-config.8.xml:58 +msgid "shell" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-config.8.xml:60 +msgid "" +"shell is used to access the configuration information from a shell script. " +"It is given pairs of arguments, the first being a shell variable and the " +"second the configuration value to query. As output it lists a series of " +"shell assignments commands for each present value. In a shell script it " +"should be used like:" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><informalexample><programlisting> +#: apt-config.8.xml:68 +#, no-wrap +msgid "" +"OPTS=\"-f\"\n" +"RES=`apt-config shell OPTS MyApp::options`\n" +"eval $RES\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-config.8.xml:73 +msgid "" +"This will set the shell environment variable $OPTS to the value of MyApp::" +"options with a default of <option>-f</option>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-config.8.xml:77 +msgid "" +"The configuration item may be postfixed with a /[fdbi]. f returns file " +"names, d returns directories, b returns true or false and i returns an " +"integer. Each of the returns is normalized and verified internally." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-config.8.xml:86 +msgid "Just show the contents of the configuration space." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-config.8.xml:104 apt-extracttemplates.1.xml:75 apt-ftparchive.1.xml:564 +#: apt-sortpkgs.1.xml:70 +msgid "&apt-conf;" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-config.8.xml:109 +msgid "" +"<command>apt-config</command> returns zero on normal operation, decimal 100 " +"on error." +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-extracttemplates.1.xml:22 apt-extracttemplates.1.xml:29 +msgid "apt-extracttemplates" +msgstr "" + +#. type: Content of: <refentry><refmeta><manvolnum> +#: apt-extracttemplates.1.xml:23 apt-ftparchive.1.xml:23 apt-sortpkgs.1.xml:23 +msgid "1" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-extracttemplates.1.xml:30 +msgid "Utility to extract DebConf config and templates from Debian packages" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-extracttemplates.1.xml:36 +msgid "" +"<command>apt-extracttemplates</command> <arg><option>-hv</option></arg> " +"<arg><option>-t=<replaceable>temporary directory</replaceable></option></" +"arg> <arg choice=\"plain\" rep=\"repeat\"><replaceable>file</replaceable></" +"arg>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-extracttemplates.1.xml:44 +msgid "" +"<command>apt-extracttemplates</command> will take one or more Debian package " +"files as input and write out (to a temporary directory) all associated " +"config scripts and template files. For each passed in package that contains " +"config scripts and templates, one line of output will be generated in the " +"format:" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-extracttemplates.1.xml:49 +msgid "package version template-file config-script" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-extracttemplates.1.xml:50 +msgid "" +"template-file and config-script are written to the temporary directory " +"specified by the -t or --tempdir (<literal>APT::ExtractTemplates::TempDir</" +"literal>) directory, with filenames of the form <filename>package.template." +"XXXX</filename> and <filename>package.config.XXXX</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-extracttemplates.1.xml:60 apt-get.8.xml:488 +msgid "<option>-t</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-extracttemplates.1.xml:60 +msgid "<option>--tempdir</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-extracttemplates.1.xml:62 +msgid "" +"Temporary directory in which to write extracted debconf template files and " +"config scripts. Configuration Item: <literal>APT::ExtractTemplates::" +"TempDir</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-extracttemplates.1.xml:79 +msgid "" +"<command>apt-extracttemplates</command> returns zero on normal operation, " +"decimal 100 on error." +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-ftparchive.1.xml:22 apt-ftparchive.1.xml:29 +msgid "apt-ftparchive" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-ftparchive.1.xml:30 +msgid "Utility to generate index files" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-ftparchive.1.xml:36 +msgid "" +"<command>apt-ftparchive</command> <arg><option>-hvdsq</option></arg> " +"<arg><option>--md5</option></arg> <arg><option>--delink</option></arg> " +"<arg><option>--readonly</option></arg> <arg><option>--contents</option></" +"arg> <arg><option>-o <replaceable>config</replaceable>=<replaceable>string</" +"replaceable></option></arg> <arg><option>-c=<replaceable>file</replaceable></" +"option></arg> <group choice=\"req\"> <arg>packages<arg choice=\"plain\" rep=" +"\"repeat\"><replaceable>path</replaceable></arg><arg><replaceable>override</" +"replaceable><arg><replaceable>pathprefix</replaceable></arg></arg></arg> " +"<arg>sources<arg choice=\"plain\" rep=\"repeat\"><replaceable>path</" +"replaceable></arg><arg><replaceable>override</" +"replaceable><arg><replaceable>pathprefix</replaceable></arg></arg></arg> " +"<arg>contents <arg choice=\"plain\"><replaceable>path</replaceable></arg></" +"arg> <arg>release <arg choice=\"plain\"><replaceable>path</replaceable></" +"arg></arg> <arg>generate <arg choice=\"plain\"><replaceable>config-file</" +"replaceable></arg> <arg choice=\"plain\" rep=\"repeat" +"\"><replaceable>section</replaceable></arg></arg> <arg>clean <arg choice=" +"\"plain\"><replaceable>config-file</replaceable></arg></arg> </group>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:56 +msgid "" +"<command>apt-ftparchive</command> is the command line tool that generates " +"the index files that APT uses to access a distribution source. The index " +"files should be generated on the origin site based on the content of that " +"site." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:60 +msgid "" +"<command>apt-ftparchive</command> is a superset of the &dpkg-scanpackages; " +"program, incorporating its entire functionality via the <literal>packages</" +"literal> command. It also contains a contents file generator, " +"<literal>contents</literal>, and an elaborate means to 'script' the " +"generation process for a complete archive." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:66 +msgid "" +"Internally <command>apt-ftparchive</command> can make use of binary " +"databases to cache the contents of a .deb file and it does not rely on any " +"external programs aside from &gzip;. When doing a full generate it " +"automatically performs file-change checks and builds the desired compressed " +"output files." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:75 +msgid "packages" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:77 +msgid "" +"The packages command generates a package file from a directory tree. It " +"takes the given directory and recursively searches it for .deb files, " +"emitting a package record to stdout for each. This command is approximately " +"equivalent to &dpkg-scanpackages;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:82 apt-ftparchive.1.xml:106 +msgid "" +"The option <option>--db</option> can be used to specify a binary caching DB." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:85 +msgid "sources" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:87 +msgid "" +"The <literal>sources</literal> command generates a source index file from a " +"directory tree. It takes the given directory and recursively searches it " +"for .dsc files, emitting a source record to stdout for each. This command is " +"approximately equivalent to &dpkg-scansources;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:92 +msgid "" +"If an override file is specified then a source override file will be looked " +"for with an extension of .src. The --source-override option can be used to " +"change the source override file that will be used." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:97 +msgid "contents" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:99 +msgid "" +"The <literal>contents</literal> command generates a contents file from a " +"directory tree. It takes the given directory and recursively searches it " +"for .deb files, and reads the file list from each file. It then sorts and " +"writes to stdout the list of files matched to packages. Directories are not " +"written to the output. If multiple packages own the same file then each " +"package is separated by a comma in the output." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:109 +msgid "release" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:111 +msgid "" +"The <literal>release</literal> command generates a Release file from a " +"directory tree. It recursively searches the given directory for Packages, " +"Packages.gz, Packages.bz2, Sources, Sources.gz, Sources.bz2, Release and " +"md5sum.txt files. It then writes to stdout a Release file containing an MD5 " +"digest and SHA1 digest for each file." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:118 +msgid "" +"Values for the additional metadata fields in the Release file are taken from " +"the corresponding variables under <literal>APT::FTPArchive::Release</" +"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The " +"supported fields are: <literal>Origin</literal>, <literal>Label</literal>, " +"<literal>Suite</literal>, <literal>Version</literal>, <literal>Codename</" +"literal>, <literal>Date</literal>, <literal>Architectures</literal>, " +"<literal>Components</literal>, <literal>Description</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:128 +#, fuzzy +msgid "generate" +msgstr "Descrizione generale" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:130 +msgid "" +"The <literal>generate</literal> command is designed to be runnable from a " +"cron script and builds indexes according to the given config file. The " +"config language provides a flexible means of specifying which index files " +"are built from which directories, as well as providing a simple means of " +"maintaining the required settings." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:137 apt-get.8.xml:292 +msgid "clean" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:139 +msgid "" +"The <literal>clean</literal> command tidies the databases used by the given " +"configuration file by removing any records that are no longer necessary." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-ftparchive.1.xml:145 +msgid "The Generate Configuration" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:147 +msgid "" +"The <literal>generate</literal> command uses a configuration file to " +"describe the archives that are going to be generated. It follows the typical " +"ISC configuration format as seen in ISC tools like bind 8 and dhcpd. &apt-" +"conf; contains a description of the syntax. Note that the generate " +"configuration is parsed in sectional manner, but &apt-conf; is parsed in a " +"tree manner. This only effects how the scope tag is handled." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:155 +msgid "" +"The generate configuration has 4 separate sections, each described below." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt-ftparchive.1.xml:157 +msgid "Dir Section" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:159 +msgid "" +"The <literal>Dir</literal> section defines the standard directories needed " +"to locate the files required during the generation process. These " +"directories are prepended certain relative paths defined in later sections " +"to produce a complete an absolute path." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:164 +msgid "ArchiveDir" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:166 +msgid "" +"Specifies the root of the FTP archive, in a standard Debian configuration " +"this is the directory that contains the <filename>ls-LR</filename> and dist " +"nodes." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:171 +msgid "OverrideDir" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:173 +msgid "Specifies the location of the override files." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:176 +msgid "CacheDir" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:178 +msgid "Specifies the location of the cache files" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:181 +msgid "FileListDir" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:183 +msgid "" +"Specifies the location of the file list files, if the <literal>FileList</" +"literal> setting is used below." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt-ftparchive.1.xml:189 +msgid "Default Section" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:191 +msgid "" +"The <literal>Default</literal> section specifies default values, and " +"settings that control the operation of the generator. Other sections may " +"override these defaults with a per-section setting." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:195 +msgid "Packages::Compress" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:197 +msgid "" +"Sets the default compression schemes to use for the Package index files. It " +"is a string that contains a space separated list of at least one of: '.' (no " +"compression), 'gzip' and 'bzip2'. The default for all compression schemes is " +"'. gzip'." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:203 +msgid "Packages::Extensions" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:205 +msgid "" +"Sets the default list of file extensions that are package files. This " +"defaults to '.deb'." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:209 +msgid "Sources::Compress" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:211 +msgid "" +"This is similar to <literal>Packages::Compress</literal> except that it " +"controls the compression for the Sources files." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:215 +msgid "Sources::Extensions" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:217 +msgid "" +"Sets the default list of file extensions that are source files. This " +"defaults to '.dsc'." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:221 +msgid "Contents::Compress" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:223 +msgid "" +"This is similar to <literal>Packages::Compress</literal> except that it " +"controls the compression for the Contents files." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:227 +msgid "DeLinkLimit" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:229 +msgid "" +"Specifies the number of kilobytes to delink (and replace with hard links) " +"per run. This is used in conjunction with the per-section <literal>External-" +"Links</literal> setting." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:234 +msgid "FileMode" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:236 +msgid "" +"Specifies the mode of all created index files. It defaults to 0644. All " +"index files are set to this mode with no regard to the umask." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt-ftparchive.1.xml:243 +msgid "TreeDefault Section" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:245 +msgid "" +"Sets defaults specific to <literal>Tree</literal> sections. All of these " +"variables are substitution variables and have the strings $(DIST), " +"$(SECTION) and $(ARCH) replaced with their respective values." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:250 +msgid "MaxContentsChange" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:252 +msgid "" +"Sets the number of kilobytes of contents files that are generated each day. " +"The contents files are round-robined so that over several days they will all " +"be rebuilt." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:257 +msgid "ContentsAge" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:259 +msgid "" +"Controls the number of days a contents file is allowed to be checked without " +"changing. If this limit is passed the mtime of the contents file is updated. " +"This case can occur if the package file is changed in such a way that does " +"not result in a new contents file [override edit for instance]. A hold off " +"is allowed in hopes that new .debs will be installed, requiring a new file " +"anyhow. The default is 10, the units are in days." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:268 +msgid "Directory" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:270 +msgid "" +"Sets the top of the .deb directory tree. Defaults to <filename>$(DIST)/" +"$(SECTION)/binary-$(ARCH)/</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:274 +msgid "SrcDirectory" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:276 +msgid "" +"Sets the top of the source package directory tree. Defaults to <filename>" +"$(DIST)/$(SECTION)/source/</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:280 apt-ftparchive.1.xml:406 +msgid "Packages" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:282 +msgid "" +"Sets the output Packages file. Defaults to <filename>$(DIST)/$(SECTION)/" +"binary-$(ARCH)/Packages</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:286 apt-ftparchive.1.xml:411 +msgid "Sources" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:288 +msgid "" +"Sets the output Packages file. Defaults to <filename>$(DIST)/$(SECTION)/" +"source/Sources</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:292 +msgid "InternalPrefix" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:294 +msgid "" +"Sets the path prefix that causes a symlink to be considered an internal link " +"instead of an external link. Defaults to <filename>$(DIST)/$(SECTION)/</" +"filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:299 apt-ftparchive.1.xml:417 +msgid "Contents" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:301 +msgid "" +"Sets the output Contents file. Defaults to <filename>$(DIST)/Contents-$(ARCH)" +"</filename>. If this setting causes multiple Packages files to map onto a " +"single Contents file (such as the default) then <command>apt-ftparchive</" +"command> will integrate those package files together automatically." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:308 +msgid "Contents::Header" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:310 +msgid "Sets header file to prepend to the contents output." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:313 apt-ftparchive.1.xml:442 +msgid "BinCacheDB" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:315 +msgid "" +"Sets the binary cache database to use for this section. Multiple sections " +"can share the same database." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:319 +msgid "FileList" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:321 +msgid "" +"Specifies that instead of walking the directory tree, <command>apt-" +"ftparchive</command> should read the list of files from the given file. " +"Relative files names are prefixed with the archive directory." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:326 +msgid "SourceFileList" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:328 +msgid "" +"Specifies that instead of walking the directory tree, <command>apt-" +"ftparchive</command> should read the list of files from the given file. " +"Relative files names are prefixed with the archive directory. This is used " +"when processing source indexes." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt-ftparchive.1.xml:336 +msgid "Tree Section" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:338 +msgid "" +"The <literal>Tree</literal> section defines a standard Debian file tree " +"which consists of a base directory, then multiple sections in that base " +"directory and finally multiple Architectures in each section. The exact " +"pathing used is defined by the <literal>Directory</literal> substitution " +"variable." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:343 +msgid "" +"The <literal>Tree</literal> section takes a scope tag which sets the " +"<literal>$(DIST)</literal> variable and defines the root of the tree (the " +"path is prefixed by <literal>ArchiveDir</literal>). Typically this is a " +"setting such as <filename>dists/woody</filename>." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:348 +msgid "" +"All of the settings defined in the <literal>TreeDefault</literal> section " +"can be use in a <literal>Tree</literal> section as well as three new " +"variables." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:351 +msgid "" +"When processing a <literal>Tree</literal> section <command>apt-ftparchive</" +"command> performs an operation similar to:" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><informalexample><programlisting> +#: apt-ftparchive.1.xml:354 +#, no-wrap +msgid "" +"for i in Sections do \n" +" for j in Architectures do\n" +" Generate for DIST=scope SECTION=i ARCH=j\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:360 +msgid "Sections" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:362 +msgid "" +"This is a space separated list of sections which appear under the " +"distribution, typically this is something like <literal>main contrib non-" +"free</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:367 +msgid "Architectures" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:369 +msgid "" +"This is a space separated list of all the architectures that appear under " +"search section. The special architecture 'source' is used to indicate that " +"this tree has a source archive." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:374 apt-ftparchive.1.xml:422 +msgid "BinOverride" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:376 +msgid "" +"Sets the binary override file. The override file contains section, priority " +"and maintainer address information." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:380 apt-ftparchive.1.xml:427 +msgid "SrcOverride" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:382 +msgid "" +"Sets the source override file. The override file contains section " +"information." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:386 apt-ftparchive.1.xml:432 +msgid "ExtraOverride" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:388 apt-ftparchive.1.xml:434 +msgid "Sets the binary extra override file." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:391 apt-ftparchive.1.xml:437 +msgid "SrcExtraOverride" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:393 apt-ftparchive.1.xml:439 +msgid "Sets the source extra override file." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt-ftparchive.1.xml:398 +msgid "BinDirectory Section" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:400 +msgid "" +"The <literal>bindirectory</literal> section defines a binary directory tree " +"with no special structure. The scope tag specifies the location of the " +"binary directory and the settings are similar to the <literal>Tree</literal> " +"section with no substitution variables or <literal>Section</" +"literal><literal>Architecture</literal> settings." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:408 +msgid "Sets the Packages file output." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:413 +msgid "" +"Sets the Sources file output. At least one of <literal>Packages</literal> or " +"<literal>Sources</literal> is required." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:419 +msgid "Sets the Contents file output. (optional)" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:424 +msgid "Sets the binary override file." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:429 +msgid "Sets the source override file." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:444 +msgid "Sets the cache DB." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:447 +msgid "PathPrefix" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:449 +msgid "Appends a path to all the output paths." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:452 +msgid "FileList, SourceFileList" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:454 +msgid "Specifies the file list file." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-ftparchive.1.xml:461 +msgid "The Binary Override File" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:462 +msgid "" +"The binary override file is fully compatible with &dpkg-scanpackages;. It " +"contains 4 fields separated by spaces. The first field is the package name, " +"the second is the priority to force that package to, the third is the the " +"section to force that package to and the final field is the maintainer " +"permutation field." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><literallayout> +#: apt-ftparchive.1.xml:468 +#, no-wrap +msgid "old [// oldn]* => new" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><literallayout> +#: apt-ftparchive.1.xml:470 +#, no-wrap +msgid "new" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:467 +msgid "" +"The general form of the maintainer field is: <placeholder type=" +"\"literallayout\" id=\"0\"/> or simply, <placeholder type=\"literallayout\" " +"id=\"1\"/> The first form allows a double-slash separated list of old email " +"addresses to be specified. If any of those are found then new is substituted " +"for the maintainer field. The second form unconditionally substitutes the " +"maintainer field." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-ftparchive.1.xml:478 +msgid "The Source Override File" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:480 +msgid "" +"The source override file is fully compatible with &dpkg-scansources;. It " +"contains 2 fields separated by spaces. The first fields is the source " +"package name, the second is the section to assign it." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-ftparchive.1.xml:485 +msgid "The Extra Override File" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:487 +msgid "" +"The extra override file allows any arbitrary tag to be added or replaced in " +"the output. It has 3 columns, the first is the package, the second is the " +"tag and the remainder of the line is the new value." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:496 +msgid "<option>--md5</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:498 +msgid "" +"Generate MD5 sums. This defaults to on, when turned off the generated index " +"files will not have MD5Sum fields where possible. Configuration Item: " +"<literal>APT::FTPArchive::MD5</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:503 +msgid "<option>--db</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:505 +msgid "" +"Use a binary caching DB. This has no effect on the generate command. " +"Configuration Item: <literal>APT::FTPArchive::DB</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:511 +msgid "" +"Quiet; produces output suitable for logging, omitting progress indicators. " +"More q's will produce more quiet up to a maximum of 2. You can also use " +"<option>-q=#</option> to set the quiet level, overriding the configuration " +"file. Configuration Item: <literal>quiet</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:517 +msgid "<option>--delink</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:519 +msgid "" +"Perform Delinking. If the <literal>External-Links</literal> setting is used " +"then this option actually enables delinking of the files. It defaults to on " +"and can be turned off with <option>--no-delink</option>. Configuration " +"Item: <literal>APT::FTPArchive::DeLinkAct</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:525 +msgid "<option>--contents</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:527 +msgid "" +"Perform contents generation. When this option is set and package indexes are " +"being generated with a cache DB then the file listing will also be extracted " +"and stored in the DB for later use. When using the generate command this " +"option also allows the creation of any Contents files. The default is on. " +"Configuration Item: <literal>APT::FTPArchive::Contents</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:535 +msgid "<option>--source-override</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:537 +msgid "" +"Select the source override file to use with the <literal>sources</literal> " +"command. Configuration Item: <literal>APT::FTPArchive::SourceOverride</" +"literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:541 +msgid "<option>--readonly</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:543 +msgid "" +"Make the caching databases read only. Configuration Item: <literal>APT::" +"FTPArchive::ReadOnlyDB</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-ftparchive.1.xml:552 apt.conf.5.xml:982 apt_preferences.5.xml:462 +#: sources.list.5.xml:193 +msgid "Examples" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><programlisting> +#: apt-ftparchive.1.xml:558 +#, no-wrap +msgid "<command>apt-ftparchive</command> packages <replaceable>directory</replaceable> | <command>gzip</command> > <filename>Packages.gz</filename>\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:554 +msgid "" +"To create a compressed Packages file for a directory containing binary " +"packages (.deb): <placeholder type=\"programlisting\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:568 +msgid "" +"<command>apt-ftparchive</command> returns zero on normal operation, decimal " +"100 on error." +msgstr "" + +#. The last update date +#. type: Content of: <refentry><refentryinfo> +#: apt-get.8.xml:13 +msgid "" +"&apt-author.jgunthorpe; &apt-author.team; &apt-email; &apt-product; <date>08 " +"November 2008</date>" +msgstr "" + +#. type: <heading></heading> +#: apt-get.8.xml:22 apt-get.8.xml:29 guide.sgml:96 +#, fuzzy +msgid "apt-get" +msgstr "apt-get" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-get.8.xml:30 +msgid "APT package handling utility -- command-line interface" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-get.8.xml:36 +msgid "" +"<command>apt-get</command> <arg><option>-sqdyfmubV</option></arg> <arg> " +"<option>-o= <replaceable>config_string</replaceable> </option> </arg> <arg> " +"<option>-c= <replaceable>config_file</replaceable> </option> </arg> <arg> " +"<option>-t=</option> <group choice='req'> <arg choice='plain'> " +"<replaceable>target_release_name</replaceable> </arg> <arg choice='plain'> " +"<replaceable>target_release_number_expression</replaceable> </arg> <arg " +"choice='plain'> <replaceable>target_release_codename</replaceable> </arg> </" +"group> </arg> <group choice=\"req\"> <arg choice='plain'>update</arg> <arg " +"choice='plain'>upgrade</arg> <arg choice='plain'>dselect-upgrade</arg> <arg " +"choice='plain'>dist-upgrade</arg> <arg choice='plain'>install <arg choice=" +"\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable> <arg> <group " +"choice='req'> <arg choice='plain'> =<replaceable>pkg_version_number</" +"replaceable> </arg> <arg choice='plain'> /<replaceable>target_release_name</" +"replaceable> </arg> <arg choice='plain'> /" +"<replaceable>target_release_codename</replaceable> </arg> </group> </arg> </" +"arg> </arg> <arg choice='plain'>remove <arg choice=\"plain\" rep=\"repeat" +"\"><replaceable>pkg</replaceable></arg></arg> <arg choice='plain'>purge <arg " +"choice=\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable></arg></arg> " +"<arg choice='plain'>source <arg choice=\"plain\" rep=\"repeat" +"\"><replaceable>pkg</replaceable> <arg> <group choice='req'> <arg " +"choice='plain'> =<replaceable>pkg_version_number</replaceable> </arg> <arg " +"choice='plain'> /<replaceable>target_release_name</replaceable> </arg> <arg " +"choice='plain'> /<replaceable>target_release_codename</replaceable> </arg> </" +"group> </arg> </arg> </arg> <arg choice='plain'>build-dep <arg choice=\"plain" +"\" rep=\"repeat\"><replaceable>pkg</replaceable></arg></arg> <arg " +"choice='plain'>check</arg> <arg choice='plain'>clean</arg> <arg " +"choice='plain'>autoclean</arg> <arg choice='plain'>autoremove</arg> <arg " +"choice='plain'> <group choice='req'> <arg choice='plain'>-v</arg> <arg " +"choice='plain'>--version</arg> </group> </arg> <arg choice='plain'> <group " +"choice='req'> <arg choice='plain'>-h</arg> <arg choice='plain'>--help</arg> " +"</group> </arg> </group>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-get.8.xml:126 +msgid "" +"<command>apt-get</command> is the command-line tool for handling packages, " +"and may be considered the user's \"back-end\" to other tools using the APT " +"library. Several \"front-end\" interfaces exist, such as &dselect;, " +"&aptitude;, &synaptic;, &gnome-apt; and &wajig;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:135 apt-key.8.xml:123 +#, fuzzy +msgid "update" +msgstr "upgrade" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:136 +msgid "" +"<literal>update</literal> is used to resynchronize the package index files " +"from their sources. The indexes of available packages are fetched from the " +"location(s) specified in <filename>/etc/apt/sources.list</filename>. For " +"example, when using a Debian archive, this command retrieves and scans the " +"<filename>Packages.gz</filename> files, so that information about new and " +"updated packages is available. An <literal>update</literal> should always be " +"performed before an <literal>upgrade</literal> or <literal>dist-upgrade</" +"literal>. Please be aware that the overall progress meter will be incorrect " +"as the size of the package files cannot be known in advance." +msgstr "" + +#. type: <tag></tag> +#: apt-get.8.xml:147 guide.sgml:121 +#, fuzzy +msgid "upgrade" +msgstr "upgrade" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:148 +msgid "" +"<literal>upgrade</literal> is used to install the newest versions of all " +"packages currently installed on the system from the sources enumerated in " +"<filename>/etc/apt/sources.list</filename>. Packages currently installed " +"with new versions available are retrieved and upgraded; under no " +"circumstances are currently installed packages removed, or packages not " +"already installed retrieved and installed. New versions of currently " +"installed packages that cannot be upgraded without changing the install " +"status of another package will be left at their current version. An " +"<literal>update</literal> must be performed first so that <command>apt-get</" +"command> knows that new versions of packages are available." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:160 +#, fuzzy +msgid "dselect-upgrade" +msgstr "dist-upgrade" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:161 +msgid "" +"<literal>dselect-upgrade</literal> is used in conjunction with the " +"traditional Debian packaging front-end, &dselect;. <literal>dselect-upgrade</" +"literal> follows the changes made by &dselect; to the <literal>Status</" +"literal> field of available packages, and performs the actions necessary to " +"realize that state (for instance, the removal of old and the installation of " +"new packages)." +msgstr "" + +#. type: <tag></tag> +#: apt-get.8.xml:170 guide.sgml:140 +#, fuzzy +msgid "dist-upgrade" +msgstr "dist-upgrade" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:171 +msgid "" +"<literal>dist-upgrade</literal> in addition to performing the function of " +"<literal>upgrade</literal>, also intelligently handles changing dependencies " +"with new versions of packages; <command>apt-get</command> has a \"smart\" " +"conflict resolution system, and it will attempt to upgrade the most " +"important packages at the expense of less important ones if necessary. So, " +"<literal>dist-upgrade</literal> command may remove some packages. The " +"<filename>/etc/apt/sources.list</filename> file contains a list of locations " +"from which to retrieve desired package files. See also &apt-preferences; " +"for a mechanism for overriding the general settings for individual packages." +msgstr "" + +#. type: <tag></tag> +#: apt-get.8.xml:183 guide.sgml:131 +#, fuzzy +msgid "install" +msgstr "install" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:185 +msgid "" +"<literal>install</literal> is followed by one or more packages desired for " +"installation or upgrading. Each package is a package name, not a fully " +"qualified filename (for instance, in a Debian GNU/Linux system, libc6 would " +"be the argument provided, not <literal>libc6_1.9.6-2.deb</literal>). All " +"packages required by the package(s) specified for installation will also be " +"retrieved and installed. The <filename>/etc/apt/sources.list</filename> " +"file is used to locate the desired packages. If a hyphen is appended to the " +"package name (with no intervening space), the identified package will be " +"removed if it is installed. Similarly a plus sign can be used to designate " +"a package to install. These latter features may be used to override " +"decisions made by apt-get's conflict resolution system." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:203 +msgid "" +"A specific version of a package can be selected for installation by " +"following the package name with an equals and the version of the package to " +"select. This will cause that version to be located and selected for install. " +"Alternatively a specific distribution can be selected by following the " +"package name with a slash and the version of the distribution or the Archive " +"name (stable, testing, unstable)." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:210 +msgid "" +"Both of the version selection mechanisms can downgrade packages and must be " +"used with care." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:213 +msgid "" +"This is also the target to use if you want to upgrade one or more already-" +"installed packages without upgrading every package you have on your system. " +"Unlike the \"upgrade\" target, which installs the newest version of all " +"currently installed packages, \"install\" will install the newest version of " +"only the package(s) specified. Simply provide the name of the package(s) " +"you wish to upgrade, and if a newer version is available, it (and its " +"dependencies, as described above) will be downloaded and installed." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:224 +msgid "" +"Finally, the &apt-preferences; mechanism allows you to create an alternative " +"installation policy for individual packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:228 +msgid "" +"If no package matches the given expression and the expression contains one " +"of '.', '?' or '*' then it is assumed to be a POSIX regular expression, and " +"it is applied to all package names in the database. Any matches are then " +"installed (or removed). Note that matching is done by substring so 'lo.*' " +"matches 'how-lo' and 'lowest'. If this is undesired, anchor the regular " +"expression with a '^' or '$' character, or create a more specific regular " +"expression." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:237 +msgid "remove" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:238 +msgid "" +"<literal>remove</literal> is identical to <literal>install</literal> except " +"that packages are removed instead of installed. Note the removing a package " +"leaves its configuration files in system. If a plus sign is appended to the " +"package name (with no intervening space), the identified package will be " +"installed instead of removed." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:245 +msgid "purge" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:246 +msgid "" +"<literal>purge</literal> is identical to <literal>remove</literal> except " +"that packages are removed and purged (any configuration files are deleted " +"too)." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:250 +msgid "source" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:251 +msgid "" +"<literal>source</literal> causes <command>apt-get</command> to fetch source " +"packages. APT will examine the available packages to decide which source " +"package to fetch. It will then find and download into the current directory " +"the newest available version of that source package while respect the " +"default release, set with the option <literal>APT::Default-Release</" +"literal>, the <option>-t</option> option or per package with the " +"<literal>pkg/release</literal> syntax, if possible." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:259 +msgid "" +"Source packages are tracked separately from binary packages via <literal>deb-" +"src</literal> type lines in the &sources-list; file. This means that you " +"will need to add such a line for each repository you want to get sources " +"from. If you don't do this you will properly get another (newer, older or " +"none) source version than the one you have installed or could install." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:266 +msgid "" +"If the <option>--compile</option> option is specified then the package will " +"be compiled to a binary .deb using <command>dpkg-buildpackage</command>, if " +"<option>--download-only</option> is specified then the source package will " +"not be unpacked." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:271 +msgid "" +"A specific source version can be retrieved by postfixing the source name " +"with an equals and then the version to fetch, similar to the mechanism used " +"for the package files. This enables exact matching of the source package " +"name and version, implicitly enabling the <literal>APT::Get::Only-Source</" +"literal> option." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:277 +msgid "" +"Note that source packages are not tracked like binary packages, they exist " +"only in the current directory and are similar to downloading source tar " +"balls." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:282 +msgid "build-dep" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:283 +msgid "" +"<literal>build-dep</literal> causes apt-get to install/remove packages in an " +"attempt to satisfy the build dependencies for a source package." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:287 +msgid "check" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:288 +msgid "" +"<literal>check</literal> is a diagnostic tool; it updates the package cache " +"and checks for broken dependencies." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:293 +msgid "" +"<literal>clean</literal> clears out the local repository of retrieved " +"package files. It removes everything but the lock file from " +"<filename>&cachedir;/archives/</filename> and <filename>&cachedir;/archives/" +"partial/</filename>. When APT is used as a &dselect; method, <literal>clean</" +"literal> is run automatically. Those who do not use dselect will likely " +"want to run <literal>apt-get clean</literal> from time to time to free up " +"disk space." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:302 +msgid "autoclean" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:303 +msgid "" +"Like <literal>clean</literal>, <literal>autoclean</literal> clears out the " +"local repository of retrieved package files. The difference is that it only " +"removes package files that can no longer be downloaded, and are largely " +"useless. This allows a cache to be maintained over a long period without it " +"growing out of control. The configuration option <literal>APT::Clean-" +"Installed</literal> will prevent installed packages from being erased if it " +"is set to off." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:312 +msgid "autoremove" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:313 +msgid "" +"<literal>autoremove</literal> is used to remove packages that were " +"automatically installed to satisfy dependencies for some package and that " +"are no more needed." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:323 apt-get.8.xml:429 +msgid "<option>--no-install-recommends</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:324 +msgid "" +"Do not consider recommended packages as a dependency for installing. " +"Configuration Item: <literal>APT::Install-Recommends</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:328 +msgid "<option>--download-only</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:329 +msgid "" +"Download only; package files are only retrieved, not unpacked or installed. " +"Configuration Item: <literal>APT::Get::Download-Only</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:333 +msgid "<option>--fix-broken</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:334 +msgid "" +"Fix; attempt to correct a system with broken dependencies in place. This " +"option, when used with install/remove, can omit any packages to permit APT " +"to deduce a likely solution. Any Package that are specified must completely " +"correct the problem. The option is sometimes necessary when running APT for " +"the first time; APT itself does not allow broken package dependencies to " +"exist on a system. It is possible that a system's dependency structure can " +"be so corrupt as to require manual intervention (which usually means using " +"&dselect; or <command>dpkg --remove</command> to eliminate some of the " +"offending packages). Use of this option together with <option>-m</option> " +"may produce an error in some situations. Configuration Item: <literal>APT::" +"Get::Fix-Broken</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:347 +msgid "<option>--ignore-missing</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:348 +msgid "<option>--fix-missing</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:349 +msgid "" +"Ignore missing packages; If packages cannot be retrieved or fail the " +"integrity check after retrieval (corrupted package files), hold back those " +"packages and handle the result. Use of this option together with <option>-f</" +"option> may produce an error in some situations. If a package is selected " +"for installation (particularly if it is mentioned on the command line) and " +"it could not be downloaded then it will be silently held back. " +"Configuration Item: <literal>APT::Get::Fix-Missing</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:359 +msgid "<option>--no-download</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:360 +msgid "" +"Disables downloading of packages. This is best used with <option>--ignore-" +"missing</option> to force APT to use only the .debs it has already " +"downloaded. Configuration Item: <literal>APT::Get::Download</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:367 +msgid "" +"Quiet; produces output suitable for logging, omitting progress indicators. " +"More q's will produce more quiet up to a maximum of 2. You can also use " +"<option>-q=#</option> to set the quiet level, overriding the configuration " +"file. Note that quiet level 2 implies <option>-y</option>, you should never " +"use -qq without a no-action modifier such as -d, --print-uris or -s as APT " +"may decided to do something you did not expect. Configuration Item: " +"<literal>quiet</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:377 +msgid "<option>--simulate</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:379 +msgid "<option>--dry-run</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:382 +msgid "" +"No action; perform a simulation of events that would occur but do not " +"actually change the system. Configuration Item: <literal>APT::Get::" +"Simulate</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:386 +msgid "" +"Simulation run as user will deactivate locking (<literal>Debug::NoLocking</" +"literal>) automatic. Also a notice will be displayed indicating that this " +"is only a simulation, if the option <literal>APT::Get::Show-User-Simulation-" +"Note</literal> is set (Default: true). Neither NoLocking nor the notice " +"will be triggered if run as root (root should know what he is doing without " +"further warnings by <literal>apt-get</literal>)." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:392 +msgid "" +"Simulate prints out a series of lines each one representing a dpkg " +"operation, Configure (Conf), Remove (Remv), Unpack (Inst). Square brackets " +"indicate broken packages and empty set of square brackets meaning breaks " +"that are of no consequence (rare)." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:399 +msgid "<option>-y</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:399 +msgid "<option>--yes</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:400 +msgid "<option>--assume-yes</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:401 +msgid "" +"Automatic yes to prompts; assume \"yes\" as answer to all prompts and run " +"non-interactively. If an undesirable situation, such as changing a held " +"package, trying to install a unauthenticated package or removing an " +"essential package occurs then <literal>apt-get</literal> will abort. " +"Configuration Item: <literal>APT::Get::Assume-Yes</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:408 +msgid "<option>-u</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:408 +msgid "<option>--show-upgraded</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:409 +msgid "" +"Show upgraded packages; Print out a list of all packages that are to be " +"upgraded. Configuration Item: <literal>APT::Get::Show-Upgraded</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:414 +msgid "<option>-V</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:414 +msgid "<option>--verbose-versions</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:415 +msgid "" +"Show full versions for upgraded and installed packages. Configuration Item: " +"<literal>APT::Get::Show-Versions</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:419 +msgid "<option>-b</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:419 +msgid "<option>--compile</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:420 +msgid "<option>--build</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:421 +msgid "" +"Compile source packages after downloading them. Configuration Item: " +"<literal>APT::Get::Compile</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:425 +msgid "<option>--install-recommends</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:426 +msgid "Also install recommended packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:430 +msgid "Do not install recommended packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:433 +msgid "<option>--ignore-hold</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:434 +msgid "" +"Ignore package Holds; This causes <command>apt-get</command> to ignore a " +"hold placed on a package. This may be useful in conjunction with " +"<literal>dist-upgrade</literal> to override a large number of undesired " +"holds. Configuration Item: <literal>APT::Ignore-Hold</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:440 +msgid "<option>--no-upgrade</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:441 +msgid "" +"Do not upgrade packages; When used in conjunction with <literal>install</" +"literal>, <literal>no-upgrade</literal> will prevent packages on the command " +"line from being upgraded if they are already installed. Configuration Item: " +"<literal>APT::Get::Upgrade</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:447 +msgid "<option>--force-yes</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:448 +msgid "" +"Force yes; This is a dangerous option that will cause apt to continue " +"without prompting if it is doing something potentially harmful. It should " +"not be used except in very special situations. Using <literal>force-yes</" +"literal> can potentially destroy your system! Configuration Item: " +"<literal>APT::Get::force-yes</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:455 +msgid "<option>--print-uris</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:456 +msgid "" +"Instead of fetching the files to install their URIs are printed. Each URI " +"will have the path, the destination file name, the size and the expected md5 " +"hash. Note that the file name to write to will not always match the file " +"name on the remote site! This also works with the <literal>source</literal> " +"and <literal>update</literal> commands. When used with the <literal>update</" +"literal> command the MD5 and size are not included, and it is up to the user " +"to decompress any compressed files. Configuration Item: <literal>APT::Get::" +"Print-URIs</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:466 +msgid "<option>--purge</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:467 +msgid "" +"Use purge instead of remove for anything that would be removed. An asterisk " +"(\"*\") will be displayed next to packages which are scheduled to be purged. " +"<option>remove --purge</option> is equivalent for <option>purge</option> " +"command. Configuration Item: <literal>APT::Get::Purge</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:474 +msgid "<option>--reinstall</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:475 +msgid "" +"Re-Install packages that are already installed and at the newest version. " +"Configuration Item: <literal>APT::Get::ReInstall</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:479 +msgid "<option>--list-cleanup</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:480 +msgid "" +"This option defaults to on, use <literal>--no-list-cleanup</literal> to turn " +"it off. When on <command>apt-get</command> will automatically manage the " +"contents of <filename>&statedir;/lists</filename> to ensure that obsolete " +"files are erased. The only reason to turn it off is if you frequently " +"change your source list. Configuration Item: <literal>APT::Get::List-" +"Cleanup</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:489 +msgid "<option>--target-release</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:490 +msgid "<option>--default-release</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:491 +msgid "" +"This option controls the default input to the policy engine, it creates a " +"default pin at priority 990 using the specified release string. This " +"overrides the general settings in <filename>/etc/apt/preferences</" +"filename>. Specifically pinned packages are not affected by the value of " +"this option. In short, this option lets you have simple control over which " +"distribution packages will be retrieved from. Some common examples might be " +"<option>-t '2.1*'</option>, <option>-t unstable</option> or <option>-t sid</" +"option>. Configuration Item: <literal>APT::Default-Release</literal>; see " +"also the &apt-preferences; manual page." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:504 +msgid "<option>--trivial-only</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:506 +msgid "" +"Only perform operations that are 'trivial'. Logically this can be considered " +"related to <option>--assume-yes</option>, where <option>--assume-yes</" +"option> will answer yes to any prompt, <option>--trivial-only</option> will " +"answer no. Configuration Item: <literal>APT::Get::Trivial-Only</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:512 +msgid "<option>--no-remove</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:513 +msgid "" +"If any packages are to be removed apt-get immediately aborts without " +"prompting. Configuration Item: <literal>APT::Get::Remove</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:518 +msgid "<option>--auto-remove</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:519 +msgid "" +"If the command is either <literal>install</literal> or <literal>remove</" +"literal>, then this option acts like running <literal>autoremove</literal> " +"command, removing the unused dependency packages. Configuration Item: " +"<literal>APT::Get::AutomaticRemove</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:525 +msgid "<option>--only-source</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:526 +msgid "" +"Only has meaning for the <literal>source</literal> and <literal>build-dep</" +"literal> commands. Indicates that the given source names are not to be " +"mapped through the binary table. This means that if this option is " +"specified, these commands will only accept source package names as " +"arguments, rather than accepting binary package names and looking up the " +"corresponding source package. Configuration Item: <literal>APT::Get::Only-" +"Source</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:536 +msgid "<option>--diff-only</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:536 +msgid "<option>--dsc-only</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:536 +msgid "<option>--tar-only</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:537 +msgid "" +"Download only the diff, dsc, or tar file of a source archive. Configuration " +"Item: <literal>APT::Get::Diff-Only</literal>, <literal>APT::Get::Dsc-Only</" +"literal>, and <literal>APT::Get::Tar-Only</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:542 +msgid "<option>--arch-only</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:543 +msgid "" +"Only process architecture-dependent build-dependencies. Configuration Item: " +"<literal>APT::Get::Arch-Only</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:547 +msgid "<option>--allow-unauthenticated</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:548 +msgid "" +"Ignore if packages can't be authenticated and don't prompt about it. This " +"is useful for tools like pbuilder. Configuration Item: <literal>APT::Get::" +"AllowUnauthenticated</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist> +#: apt-get.8.xml:561 +msgid "" +"&file-sourceslist; &file-aptconf; &file-preferences; &file-cachearchives; " +"&file-statelists;" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-get.8.xml:570 +msgid "" +"&apt-cache;, &apt-cdrom;, &dpkg;, &dselect;, &sources-list;, &apt-conf;, " +"&apt-config;, &apt-secure;, The APT User's guide in &guidesdir;, &apt-" +"preferences;, the APT Howto." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-get.8.xml:576 +msgid "" +"<command>apt-get</command> returns zero on normal operation, decimal 100 on " +"error." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-get.8.xml:579 +msgid "ORIGINAL AUTHORS" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-get.8.xml:580 +msgid "&apt-author.jgunthorpe;" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-get.8.xml:583 +msgid "CURRENT AUTHORS" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-get.8.xml:585 +msgid "&apt-author.team;" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-key.8.xml:14 apt-key.8.xml:21 +#, fuzzy +msgid "apt-key" +msgstr "apt-get" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-key.8.xml:22 +msgid "APT key management utility" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-key.8.xml:28 +msgid "" +"<command>apt-key</command> <arg><replaceable>command</replaceable>/</arg> " +"<arg rep=\"repeat\"><option><replaceable>arguments</replaceable></option></" +"arg>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-key.8.xml:36 +msgid "" +"<command>apt-key</command> is used to manage the list of keys used by apt to " +"authenticate packages. Packages which have been authenticated using these " +"keys will be considered trusted." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-key.8.xml:42 +msgid "Commands" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:44 +msgid "add <replaceable>filename</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:48 +msgid "" +"Add a new key to the list of trusted keys. The key is read from " +"<replaceable>filename</replaceable>, or standard input if " +"<replaceable>filename</replaceable> is <literal>-</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:56 +msgid "del <replaceable>keyid</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:60 +msgid "Remove a key from the list of trusted keys." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:67 +msgid "export <replaceable>keyid</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:71 +msgid "Output the key <replaceable>keyid</replaceable> to standard output." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:78 +msgid "exportall" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:82 +msgid "Output all trusted keys to standard output." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:89 +msgid "list" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:93 +msgid "List trusted keys." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:100 +msgid "finger" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:104 +msgid "List fingerprints of trusted keys." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:111 +msgid "adv" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:115 +msgid "" +"Pass advanced options to gpg. With adv --recv-key you can download the " +"public key." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:127 +msgid "" +"Update the local keyring with the keyring of Debian archive keys and removes " +"from the keyring the archive keys which are no longer valid." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:140 +msgid "<filename>/etc/apt/trusted.gpg</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:141 +msgid "Keyring of local trusted keys, new keys will be added here." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:144 +msgid "<filename>/etc/apt/trustdb.gpg</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:145 +msgid "Local trust database of archive keys." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:148 +msgid "<filename>/usr/share/keyrings/debian-archive-keyring.gpg</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:149 +msgid "Keyring of Debian archive trusted keys." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:152 +msgid "" +"<filename>/usr/share/keyrings/debian-archive-removed-keys.gpg</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:153 +msgid "Keyring of Debian archive removed trusted keys." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-key.8.xml:164 +msgid "&apt-get;, &apt-secure;" +msgstr "" + +#. The last update date +#. type: Content of: <refentry><refentryinfo> +#: apt-mark.8.xml:13 +msgid "" +"&apt-author.moconnor; &apt-author.team; &apt-email; &apt-product; <date>9 " +"August 2009</date>" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-mark.8.xml:22 apt-mark.8.xml:29 +msgid "apt-mark" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-mark.8.xml:30 +msgid "mark/unmark a package as being automatically-installed" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-mark.8.xml:36 +msgid "" +" <command>apt-mark</command> <arg><option>-hv</option></arg> <arg><option>-" +"f=<replaceable>FILENAME</replaceable></option></arg> <group choice=\"plain" +"\"> <arg choice=\"plain\"> <group choice=\"req\"> <arg choice=\"plain" +"\">markauto</arg> <arg choice=\"plain\">unmarkauto</arg> </group> <arg " +"choice=\"plain\" rep=\"repeat\"><replaceable>package</replaceable></arg> </" +"arg> <arg choice=\"plain\">showauto</arg> </group>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-mark.8.xml:53 +msgid "" +"<command>apt-mark</command> will change whether a package has been marked as " +"being automatically installed." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-mark.8.xml:57 +msgid "" +"When you request that a package is installed, and as a result other packages " +"are installed to satisfy its dependencies, the dependencies are marked as " +"being automatically installed. Once these automatically installed packages " +"are no longer depended on by any manually installed packages, they will be " +"removed by e.g. <command>apt-get</command> or <command>aptitude</command>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:65 +msgid "markauto" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-mark.8.xml:66 +msgid "" +"<literal>markauto</literal> is used to mark a package as being automatically " +"installed, which will cause the package to be removed when no more manually " +"installed packages depend on this package." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:73 +msgid "unmarkauto" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-mark.8.xml:74 +msgid "" +"<literal>unmarkauto</literal> is used to mark a package as being manually " +"installed, which will prevent the package from being automatically removed " +"if no other packages depend on it." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:81 +msgid "showauto" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-mark.8.xml:82 +msgid "" +"<literal>showauto</literal> is used to print a list of automatically " +"installed packages with each package on a new line." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:93 +msgid "" +"<option>-f=<filename><replaceable>FILENAME</replaceable></filename></option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:94 +msgid "" +"<option>--file=<filename><replaceable>FILENAME</replaceable></filename></" +"option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-mark.8.xml:97 +msgid "" +"Read/Write package stats from <filename><replaceable>FILENAME</replaceable></" +"filename> instead of the default location, which is " +"<filename>extended_status</filename> in the directory defined by the " +"Configuration Item: <literal>Dir::State</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:103 +msgid "<option>-h</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:104 +msgid "<option>--help</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-mark.8.xml:105 +msgid "Show a short usage summary." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:111 +msgid "<option>-v</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:112 +msgid "<option>--version</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-mark.8.xml:113 +msgid "Show the program version." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:124 +msgid "<filename>/var/lib/apt/extended_states</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-mark.8.xml:125 +msgid "" +"Status list of auto-installed packages. Configuration Item: <literal>Dir::" +"State</literal> sets the path to the <filename>extended_states</filename> " +"file." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-mark.8.xml:134 +msgid "&apt-get;,&aptitude;,&apt-conf;" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-mark.8.xml:138 +msgid "" +"<command>apt-mark</command> returns zero on normal operation, non-zero on " +"error." +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-secure.8.xml:14 apt-secure.8.xml:36 +msgid "apt-secure" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-secure.8.xml:37 +msgid "Archive authentication support for APT" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:42 +msgid "" +"Starting with version 0.6, <command>apt</command> contains code that does " +"signature checking of the Release file for all archives. This ensures that " +"packages in the archive can't be modified by people who have no access to " +"the Release file signing key." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:50 +msgid "" +"If a package comes from a archive without a signature or with a signature " +"that apt does not have a key for that package is considered untrusted and " +"installing it will result in a big warning. <command>apt-get</command> will " +"currently only warn for unsigned archives, future releases might force all " +"sources to be verified before downloading packages from them." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:59 +msgid "" +"The package frontends &apt-get;, &aptitude; and &synaptic; support this new " +"authentication feature." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-secure.8.xml:64 +msgid "Trusted archives" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:67 +msgid "" +"The chain of trust from an apt archive to the end user is made up of " +"different steps. <command>apt-secure</command> is the last step in this " +"chain, trusting an archive does not mean that the packages that you trust it " +"do not contain malicious code but means that you trust the archive " +"maintainer. It's the archive maintainer responsibility to ensure that the " +"archive integrity is correct." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:75 +msgid "" +"apt-secure does not review signatures at a package level. If you require " +"tools to do this you should look at <command>debsig-verify</command> and " +"<command>debsign</command> (provided in the debsig-verify and devscripts " +"packages respectively)." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:82 +msgid "" +"The chain of trust in Debian starts when a maintainer uploads a new package " +"or a new version of a package to the Debian archive. This upload in order to " +"become effective needs to be signed by a key of a maintainer within the " +"Debian maintainer's keyring (available in the debian-keyring package). " +"Maintainer's keys are signed by other maintainers following pre-established " +"procedures to ensure the identity of the key holder." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:92 +msgid "" +"Once the uploaded package is verified and included in the archive, the " +"maintainer signature is stripped off, an MD5 sum of the package is computed " +"and put in the Packages file. The MD5 sum of all of the packages files are " +"then computed and put into the Release file. The Release file is then signed " +"by the archive key (which is created once a year) and distributed through " +"the FTP server. This key is also on the Debian keyring." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:102 +msgid "" +"Any end user can check the signature of the Release file, extract the MD5 " +"sum of a package from it and compare it with the MD5 sum of the package he " +"downloaded. Prior to version 0.6 only the MD5 sum of the downloaded Debian " +"package was checked. Now both the MD5 sum and the signature of the Release " +"file are checked." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:109 +msgid "" +"Notice that this is distinct from checking signatures on a per package " +"basis. It is designed to prevent two possible attacks:" +msgstr "" + +#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para> +#: apt-secure.8.xml:114 +msgid "" +"<literal>Network \"man in the middle\" attacks</literal>. Without signature " +"checking, a malicious agent can introduce himself in the package download " +"process and provide malicious software either by controlling a network " +"element (router, switch, etc.) or by redirecting traffic to a rogue server " +"(through arp or DNS spoofing attacks)." +msgstr "" + +#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para> +#: apt-secure.8.xml:122 +msgid "" +"<literal>Mirror network compromise</literal>. Without signature checking, a " +"malicious agent can compromise a mirror host and modify the files in it to " +"propagate malicious software to all users downloading packages from that " +"host." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:129 +msgid "" +"However, it does not defend against a compromise of the Debian master server " +"itself (which signs the packages) or against a compromise of the key used to " +"sign the Release files. In any case, this mechanism can complement a per-" +"package signature." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-secure.8.xml:135 +msgid "User configuration" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:137 +msgid "" +"<command>apt-key</command> is the program that manages the list of keys used " +"by apt. It can be used to add or remove keys although an installation of " +"this release will automatically provide the default Debian archive signing " +"keys used in the Debian package repositories." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:144 +msgid "" +"In order to add a new key you need to first download it (you should make " +"sure you are using a trusted communication channel when retrieving it), add " +"it with <command>apt-key</command> and then run <command>apt-get update</" +"command> so that apt can download and verify the <filename>Release.gpg</" +"filename> files from the archives you have configured." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-secure.8.xml:153 +msgid "Archive configuration" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:155 +msgid "" +"If you want to provide archive signatures in an archive under your " +"maintenance you have to:" +msgstr "" + +#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para> +#: apt-secure.8.xml:160 +msgid "" +"<emphasis>Create a toplevel Release file</emphasis>, if it does not exist " +"already. You can do this by running <command>apt-ftparchive release</" +"command> (provided in apt-utils)." +msgstr "" + +#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para> +#: apt-secure.8.xml:165 +msgid "" +"<emphasis>Sign it</emphasis>. You can do this by running <command>gpg -abs -" +"o Release.gpg Release</command>." +msgstr "" + +#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para> +#: apt-secure.8.xml:168 +msgid "" +"<emphasis>Publish the key fingerprint</emphasis>, that way your users will " +"know what key they need to import in order to authenticate the files in the " +"archive." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:175 +msgid "" +"Whenever the contents of the archive changes (new packages are added or " +"removed) the archive maintainer has to follow the first two steps previously " +"outlined." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:183 +msgid "" +"&apt-conf;, &apt-get;, &sources-list;, &apt-key;, &apt-ftparchive;, " +"&debsign; &debsig-verify;, &gpg;" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:187 +msgid "" +"For more background information you might want to review the <ulink url=" +"\"http://www.debian.org/doc/manuals/securing-debian-howto/ch7.en.html" +"\">Debian Security Infrastructure</ulink> chapter of the Securing Debian " +"Manual (available also in the harden-doc package) and the <ulink url=" +"\"http://www.cryptnet.net/fdp/crypto/strong_distro.html\" >Strong " +"Distribution HOWTO</ulink> by V. Alex Brennen." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-secure.8.xml:200 +msgid "Manpage Authors" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:202 +msgid "" +"This man-page is based on the work of Javier Fernández-Sanguino Peña, Isaac " +"Jones, Colin Walters, Florian Weimer and Michael Vogt." +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-sortpkgs.1.xml:22 apt-sortpkgs.1.xml:29 +msgid "apt-sortpkgs" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-sortpkgs.1.xml:30 +msgid "Utility to sort package index files" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-sortpkgs.1.xml:36 +msgid "" +"<command>apt-sortpkgs</command> <arg><option>-hvs</option></arg> " +"<arg><option>-o=<replaceable>config string</replaceable></option></arg> " +"<arg><option>-c=<replaceable>file</replaceable></option></arg> <arg choice=" +"\"plain\" rep=\"repeat\"><replaceable>file</replaceable></arg>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-sortpkgs.1.xml:45 +msgid "" +"<command>apt-sortpkgs</command> will take an index file (Source index or " +"Package index) and sort the records so that they are ordered by the package " +"name. It will also sort the internal fields of each record according to the " +"internal sorting rules." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-sortpkgs.1.xml:51 +msgid "All output is sent to stdout, the input must be a seekable file." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-sortpkgs.1.xml:58 +msgid "<option>--source</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-sortpkgs.1.xml:60 +msgid "" +"Use Source index field ordering. Configuration Item: <literal>APT::" +"SortPkgs::Source</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-sortpkgs.1.xml:74 +msgid "" +"<command>apt-sortpkgs</command> returns zero on normal operation, decimal " +"100 on error." +msgstr "" + +#. The last update date +#. type: Content of: <refentry><refentryinfo> +#: apt.conf.5.xml:13 +msgid "" +"&apt-author.jgunthorpe; &apt-author.team; <author> <firstname>Daniel</" +"firstname> <surname>Burrows</surname> <contrib>Initial documentation of " +"Debug::*.</contrib> <email>dburrows@debian.org</email> </author> &apt-email; " +"&apt-product; <date>18 September 2009</date>" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt.conf.5.xml:28 apt.conf.5.xml:35 +msgid "apt.conf" +msgstr "" + +#. type: Content of: <refentry><refmeta><manvolnum> +#: apt.conf.5.xml:29 apt_preferences.5.xml:22 sources.list.5.xml:23 +msgid "5" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt.conf.5.xml:36 +msgid "Configuration file for APT" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:40 +msgid "" +"<filename>apt.conf</filename> is the main configuration file for the APT " +"suite of tools, all tools make use of the configuration file and a common " +"command line parser to provide a uniform environment. When an APT tool " +"starts up it will read the configuration specified by the <envar>APT_CONFIG</" +"envar> environment variable (if any) and then read the files in " +"<literal>Dir::Etc::Parts</literal> then read the main configuration file " +"specified by <literal>Dir::Etc::main</literal> then finally apply the " +"command line options to override the configuration directives, possibly " +"loading even more config files." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:50 +msgid "" +"The configuration file is organized in a tree with options organized into " +"functional groups. Option specification is given with a double colon " +"notation, for instance <literal>APT::Get::Assume-Yes</literal> is an option " +"within the APT tool group, for the Get tool. Options do not inherit from " +"their parent groups." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:56 +msgid "" +"Syntactically the configuration language is modeled after what the ISC tools " +"such as bind and dhcp use. Lines starting with <literal>//</literal> are " +"treated as comments (ignored), as well as all text between <literal>/*</" +"literal> and <literal>*/</literal>, just like C/C++ comments. Each line is " +"of the form <literal>APT::Get::Assume-Yes \"true\";</literal>. The trailing " +"semicolon and the quotes are required. The value must be on one line, and " +"there is no kind of string concatenation. It must not include inside " +"quotes. The behavior of the backslash \"\\\" and escaped characters inside " +"a value is undefined and it should not be used. An option name may include " +"alphanumerical characters and the \"/-:._+\" characters. A new scope can be " +"opened with curly braces, like:" +msgstr "" + +#. type: Content of: <refentry><refsect1><informalexample><programlisting> +#: apt.conf.5.xml:70 +#, no-wrap +msgid "" +"APT {\n" +" Get {\n" +" Assume-Yes \"true\";\n" +" Fix-Broken \"true\";\n" +" };\n" +"};\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:78 +msgid "" +"with newlines placed to make it more readable. Lists can be created by " +"opening a scope and including a single string enclosed in quotes followed by " +"a semicolon. Multiple entries can be included, each separated by a semicolon." +msgstr "" + +#. type: Content of: <refentry><refsect1><informalexample><programlisting> +#: apt.conf.5.xml:83 +#, no-wrap +msgid "DPkg::Pre-Install-Pkgs {\"/usr/sbin/dpkg-preconfigure --apt\";};\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:86 +msgid "" +"In general the sample configuration file in <filename>&docdir;examples/apt." +"conf</filename> &configureindex; is a good guide for how it should look." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:90 +msgid "" +"The names of the configuration items are not case-sensitive. So in the " +"previous example you could use <literal>dpkg::pre-install-pkgs</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:93 +msgid "" +"Names for the configuration items are optional if a list is defined as it " +"can be see in the <literal>DPkg::Pre-Install-Pkgs</literal> example above. " +"If you don't specify a name a new entry will simply add a new option to the " +"list. If you specify a name you can override the option as every other " +"option by reassigning a new value to the option." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:98 +msgid "" +"Two specials are allowed, <literal>#include</literal> (which is deprecated " +"and not supported by alternative implementations) and <literal>#clear</" +"literal>: <literal>#include</literal> will include the given file, unless " +"the filename ends in a slash, then the whole directory is included. " +"<literal>#clear</literal> is used to erase a part of the configuration tree. " +"The specified element and all its descendants are erased. (Note that these " +"lines also need to end with a semicolon.)" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:106 +msgid "" +"The #clear command is the only way to delete a list or a complete scope. " +"Reopening a scope or the ::-style described below will <emphasis>not</" +"emphasis> override previously written entries. Only options can be " +"overridden by addressing a new value to it - lists and scopes can't be " +"overridden, only cleared." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:111 +msgid "" +"All of the APT tools take a -o option which allows an arbitrary " +"configuration directive to be specified on the command line. The syntax is a " +"full option name (<literal>APT::Get::Assume-Yes</literal> for instance) " +"followed by an equals sign then the new value of the option. Lists can be " +"appended too by adding a trailing :: to the list name. (As you might " +"suspect: The scope syntax can't be used on the command line.)" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:118 +msgid "" +"Note that you can use :: only for appending one item per line to a list and " +"that you should not use it in combination with the scope syntax. (The scope " +"syntax implicit insert ::) Using both syntaxes together will trigger a bug " +"which some users unfortunately relay on: An option with the unusual name " +"\"<literal>::</literal>\" which acts like every other option with a name. " +"These introduces many problems including that a user who writes multiple " +"lines in this <emphasis>wrong</emphasis> syntax in the hope to append to a " +"list will gain the opposite as only the last assignment for this option " +"\"<literal>::</literal>\" will be used. Upcoming APT versions will raise " +"errors and will stop working if they encounter this misuse, so please " +"correct such statements now as long as APT doesn't complain explicit about " +"them." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt.conf.5.xml:130 +msgid "The APT Group" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:131 +msgid "" +"This group of options controls general APT behavior as well as holding the " +"options for all of the tools." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:135 +msgid "Architecture" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:136 +msgid "" +"System Architecture; sets the architecture to use when fetching files and " +"parsing package lists. The internal default is the architecture apt was " +"compiled for." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:141 +msgid "Default-Release" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:142 +msgid "" +"Default release to install packages from if more than one version available. " +"Contains release name, codename or release version. Examples: 'stable', " +"'testing', 'unstable', 'lenny', 'squeeze', '4.0', '5.0*'. See also &apt-" +"preferences;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:146 +msgid "Ignore-Hold" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:147 +msgid "" +"Ignore Held packages; This global option causes the problem resolver to " +"ignore held packages in its decision making." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:151 +msgid "Clean-Installed" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:152 +msgid "" +"Defaults to on. When turned on the autoclean feature will remove any " +"packages which can no longer be downloaded from the cache. If turned off " +"then packages that are locally installed are also excluded from cleaning - " +"but note that APT provides no direct means to reinstall them." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:158 +msgid "Immediate-Configure" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:159 +msgid "" +"Defaults to on which will cause APT to install essential and important " +"packages as fast as possible in the install/upgrade operation. This is done " +"to limit the effect of a failing &dpkg; call: If this option is disabled APT " +"does treat an important package in the same way as an extra package: Between " +"the unpacking of the important package A and his configuration can then be " +"many other unpack or configuration calls, e.g. for package B which has no " +"relation to A, but causes the dpkg call to fail (e.g. because maintainer " +"script of package B generates an error) which results in a system state in " +"which package A is unpacked but unconfigured - each package depending on A " +"is now no longer guaranteed to work as their dependency on A is not longer " +"satisfied. The immediate configuration marker is also applied to all " +"dependencies which can generate a problem if the dependencies e.g. form a " +"circle as a dependency with the immediate flag is comparable with a Pre-" +"Dependency. So in theory it is possible that APT encounters a situation in " +"which it is unable to perform immediate configuration, error out and refers " +"to this option so the user can deactivate the immediate configuration " +"temporary to be able to perform an install/upgrade again. Note the use of " +"the word \"theory\" here as this problem was only encountered by now in real " +"world a few times in non-stable distribution versions and caused by wrong " +"dependencies of the package in question or by a system in an already broken " +"state, so you should not blindly disable this option as the mentioned " +"scenario above is not the only problem immediate configuration can help to " +"prevent in the first place. Before a big operation like <literal>dist-" +"upgrade</literal> is run with this option disabled it should be tried to " +"explicitly <literal>install</literal> the package APT is unable to configure " +"immediately, but please make sure to report your problem also to your " +"distribution and to the APT team with the buglink below so they can work on " +"improving or correcting the upgrade process." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:181 +msgid "Force-LoopBreak" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:182 +msgid "" +"Never Enable this option unless you -really- know what you are doing. It " +"permits APT to temporarily remove an essential package to break a Conflicts/" +"Conflicts or Conflicts/Pre-Depend loop between two essential packages. SUCH " +"A LOOP SHOULD NEVER EXIST AND IS A GRAVE BUG. This option will work if the " +"essential packages are not tar, gzip, libc, dpkg, bash or anything that " +"those packages depend on." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:190 +msgid "Cache-Limit" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:191 +msgid "" +"APT uses a fixed size memory mapped cache file to store the 'available' " +"information. This sets the size of that cache (in bytes)." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:195 +msgid "Build-Essential" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:196 +msgid "Defines which package(s) are considered essential build dependencies." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:199 +msgid "Get" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:200 +msgid "" +"The Get subsection controls the &apt-get; tool, please see its documentation " +"for more information about the options here." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:204 +msgid "Cache" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:205 +msgid "" +"The Cache subsection controls the &apt-cache; tool, please see its " +"documentation for more information about the options here." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:209 +msgid "CDROM" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:210 +msgid "" +"The CDROM subsection controls the &apt-cdrom; tool, please see its " +"documentation for more information about the options here." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt.conf.5.xml:216 +msgid "The Acquire Group" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:221 +msgid "PDiffs" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:222 +msgid "" +"Try to download deltas called <literal>PDiffs</literal> for Packages or " +"Sources files instead of downloading whole ones. True by default." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:227 +msgid "Queue-Mode" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:228 +msgid "" +"Queuing mode; <literal>Queue-Mode</literal> can be one of <literal>host</" +"literal> or <literal>access</literal> which determines how APT parallelizes " +"outgoing connections. <literal>host</literal> means that one connection per " +"target host will be opened, <literal>access</literal> means that one " +"connection per URI type will be opened." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:235 +msgid "Retries" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:236 +msgid "" +"Number of retries to perform. If this is non-zero APT will retry failed " +"files the given number of times." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:240 +msgid "Source-Symlinks" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:241 +msgid "" +"Use symlinks for source archives. If set to true then source archives will " +"be symlinked when possible instead of copying. True is the default." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:245 sources.list.5.xml:139 +msgid "http" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:246 +msgid "" +"HTTP URIs; http::Proxy is the default http proxy to use. It is in the " +"standard form of <literal>http://[[user][:pass]@]host[:port]/</literal>. Per " +"host proxies can also be specified by using the form <literal>http::Proxy::" +"<host></literal> with the special keyword <literal>DIRECT</literal> " +"meaning to use no proxies. If no one of the above settings is specified, " +"<envar>http_proxy</envar> environment variable will be used." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:254 +msgid "" +"Three settings are provided for cache control with HTTP/1.1 compliant proxy " +"caches. <literal>No-Cache</literal> tells the proxy to not use its cached " +"response under any circumstances, <literal>Max-Age</literal> is sent only " +"for index files and tells the cache to refresh its object if it is older " +"than the given number of seconds. Debian updates its index files daily so " +"the default is 1 day. <literal>No-Store</literal> specifies that the cache " +"should never store this request, it is only set for archive files. This may " +"be useful to prevent polluting a proxy cache with very large .deb files. " +"Note: Squid 2.0.2 does not support any of these options." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:264 apt.conf.5.xml:321 +msgid "" +"The option <literal>timeout</literal> sets the timeout timer used by the " +"method, this applies to all things including connection timeout and data " +"timeout." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:267 +msgid "" +"One setting is provided to control the pipeline depth in cases where the " +"remote server is not RFC conforming or buggy (such as Squid 2.0.2). " +"<literal>Acquire::http::Pipeline-Depth</literal> can be a value from 0 to 5 " +"indicating how many outstanding requests APT should send. A value of zero " +"MUST be specified if the remote host does not properly linger on TCP " +"connections - otherwise data corruption will occur. Hosts which require this " +"are in violation of RFC 2068." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:275 +msgid "" +"The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</" +"literal> which accepts integer values in kilobyte. The default value is 0 " +"which deactivates the limit and tries uses as much as possible of the " +"bandwidth (Note that this option implicit deactivates the download from " +"multiple servers at the same time.)" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:281 +msgid "https" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:282 +msgid "" +"HTTPS URIs. Cache-control and proxy options are the same as for " +"<literal>http</literal> method. <literal>Pipeline-Depth</literal> option is " +"not supported yet." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:286 +msgid "" +"<literal>CaInfo</literal> suboption specifies place of file that holds info " +"about trusted certificates. <literal><host>::CaInfo</literal> is " +"corresponding per-host option. <literal>Verify-Peer</literal> boolean " +"suboption determines whether verify server's host certificate against " +"trusted certificates or not. <literal><host>::Verify-Peer</literal> " +"is corresponding per-host option. <literal>Verify-Host</literal> boolean " +"suboption determines whether verify server's hostname or not. <literal><" +"host>::Verify-Host</literal> is corresponding per-host option. " +"<literal>SslCert</literal> determines what certificate to use for client " +"authentication. <literal><host>::SslCert</literal> is corresponding " +"per-host option. <literal>SslKey</literal> determines what private key to " +"use for client authentication. <literal><host>::SslKey</literal> is " +"corresponding per-host option. <literal>SslForceVersion</literal> overrides " +"default SSL version to use. Can contain 'TLSv1' or 'SSLv3' string. " +"<literal><host>::SslForceVersion</literal> is corresponding per-host " +"option." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:304 sources.list.5.xml:150 +msgid "ftp" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:305 +msgid "" +"FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the standard " +"form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. Per host " +"proxies can also be specified by using the form <literal>ftp::Proxy::<" +"host></literal> with the special keyword <literal>DIRECT</literal> " +"meaning to use no proxies. If no one of the above settings is specified, " +"<envar>ftp_proxy</envar> environment variable will be used. To use a ftp " +"proxy you will have to set the <literal>ftp::ProxyLogin</literal> script in " +"the configuration file. This entry specifies the commands to send to tell " +"the proxy server what to connect to. Please see &configureindex; for an " +"example of how to do this. The substitution variables available are <literal>" +"$(PROXY_USER)</literal> <literal>$(PROXY_PASS)</literal> <literal>" +"$(SITE_USER)</literal> <literal>$(SITE_PASS)</literal> <literal>$(SITE)</" +"literal> and <literal>$(SITE_PORT)</literal> Each is taken from it's " +"respective URI component." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:324 +msgid "" +"Several settings are provided to control passive mode. Generally it is safe " +"to leave passive mode on, it works in nearly every environment. However " +"some situations require that passive mode be disabled and port mode ftp used " +"instead. This can be done globally, for connections that go through a proxy " +"or for a specific host (See the sample config file for examples)." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:331 +msgid "" +"It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</" +"envar> environment variable to a http url - see the discussion of the http " +"method above for syntax. You cannot set this in the configuration file and " +"it is not recommended to use FTP over HTTP due to its low efficiency." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:336 +msgid "" +"The setting <literal>ForceExtended</literal> controls the use of RFC2428 " +"<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is " +"false, which means these commands are only used if the control connection is " +"IPv6. Setting this to true forces their use even on IPv4 connections. Note " +"that most FTP servers do not support RFC2428." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:343 sources.list.5.xml:132 +msgid "cdrom" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> +#: apt.conf.5.xml:349 +#, no-wrap +msgid "/cdrom/::Mount \"foo\";" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:344 +msgid "" +"CDROM URIs; the only setting for CDROM URIs is the mount point, " +"<literal>cdrom::Mount</literal> which must be the mount point for the CDROM " +"drive as specified in <filename>/etc/fstab</filename>. It is possible to " +"provide alternate mount and unmount commands if your mount point cannot be " +"listed in the fstab (such as an SMB mount and old mount packages). The " +"syntax is to put <placeholder type=\"literallayout\" id=\"0\"/> within the " +"cdrom block. It is important to have the trailing slash. Unmount commands " +"can be specified using UMount." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:354 +msgid "gpgv" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:355 +msgid "" +"GPGV URIs; the only option for GPGV URIs is the option to pass additional " +"parameters to gpgv. <literal>gpgv::Options</literal> Additional options " +"passed to gpgv." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:360 +msgid "CompressionTypes" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> +#: apt.conf.5.xml:366 +#, no-wrap +msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:361 +msgid "" +"List of compression types which are understood by the acquire methods. " +"Files like <filename>Packages</filename> can be available in various " +"compression formats. Per default the acquire methods can decompress " +"<command>bzip2</command>, <command>lzma</command> and <command>gzip</" +"command> compressed files, with this setting more formats can be added on " +"the fly or the used method can be changed. The syntax for this is: " +"<placeholder type=\"synopsis\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> +#: apt.conf.5.xml:371 +#, no-wrap +msgid "Acquire::CompressionTypes::Order:: \"gz\";" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> +#: apt.conf.5.xml:374 +#, no-wrap +msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:367 +msgid "" +"Also the <literal>Order</literal> subgroup can be used to define in which " +"order the acquire system will try to download the compressed files. The " +"acquire system will try the first and proceed with the next compression type " +"in this list on error, so to prefer one over the other type simple add the " +"preferred type at first - not already added default types will be added at " +"run time to the end of the list, so e.g. <placeholder type=\"synopsis\" id=" +"\"0\"/> can be used to prefer <command>gzip</command> compressed files over " +"<command>bzip2</command> and <command>lzma</command>. If <command>lzma</" +"command> should be preferred over <command>gzip</command> and " +"<command>bzip2</command> the configure setting should look like this " +"<placeholder type=\"synopsis\" id=\"1\"/> It is not needed to add " +"<literal>bz2</literal> explicit to the list as it will be added automatic." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> +#: apt.conf.5.xml:378 +#, no-wrap +msgid "Dir::Bin::bzip2 \"/bin/bzip2\";" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:376 +msgid "" +"Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</" +"replaceable></literal> will be checked: If this setting exists the method " +"will only be used if this file exists, e.g. for the bzip2 method (the " +"inbuilt) setting is <placeholder type=\"literallayout\" id=\"0\"/> Note also " +"that list entries specified on the command line will be added at the end of " +"the list specified in the configuration files, but before the default " +"entries. To prefer a type in this case over the ones specified in in the " +"configuration files you can set the option direct - not in list style. This " +"will not override the defined list, it will only prefix the list with this " +"type." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:383 +msgid "" +"While it is possible to add an empty compression type to the order list, but " +"APT in its current version doesn't understand it correctly and will display " +"many warnings about not downloaded files - these warnings are most of the " +"time false negatives. Future versions will maybe include a way to really " +"prefer uncompressed files to support the usage of local mirrors." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:217 +msgid "" +"The <literal>Acquire</literal> group of options controls the download of " +"packages and the URI handlers. <placeholder type=\"variablelist\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt.conf.5.xml:392 +msgid "Directories" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:394 +msgid "" +"The <literal>Dir::State</literal> section has directories that pertain to " +"local state information. <literal>lists</literal> is the directory to place " +"downloaded package lists in and <literal>status</literal> is the name of the " +"dpkg status file. <literal>preferences</literal> is the name of the APT " +"preferences file. <literal>Dir::State</literal> contains the default " +"directory to prefix on all sub items if they do not start with <filename>/</" +"filename> or <filename>./</filename>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:401 +msgid "" +"<literal>Dir::Cache</literal> contains locations pertaining to local cache " +"information, such as the two package caches <literal>srcpkgcache</literal> " +"and <literal>pkgcache</literal> as well as the location to place downloaded " +"archives, <literal>Dir::Cache::archives</literal>. Generation of caches can " +"be turned off by setting their names to be blank. This will slow down " +"startup but save disk space. It is probably preferred to turn off the " +"pkgcache rather than the srcpkgcache. Like <literal>Dir::State</literal> the " +"default directory is contained in <literal>Dir::Cache</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:410 +msgid "" +"<literal>Dir::Etc</literal> contains the location of configuration files, " +"<literal>sourcelist</literal> gives the location of the sourcelist and " +"<literal>main</literal> is the default configuration file (setting has no " +"effect, unless it is done from the config file specified by " +"<envar>APT_CONFIG</envar>)." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:416 +msgid "" +"The <literal>Dir::Parts</literal> setting reads in all the config fragments " +"in lexical order from the directory specified. After this is done then the " +"main config file is loaded." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:420 +msgid "" +"Binary programs are pointed to by <literal>Dir::Bin</literal>. <literal>Dir::" +"Bin::Methods</literal> specifies the location of the method handlers and " +"<literal>gzip</literal>, <literal>bzip2</literal>, <literal>lzma</literal>, " +"<literal>dpkg</literal>, <literal>apt-get</literal> <literal>dpkg-source</" +"literal> <literal>dpkg-buildpackage</literal> and <literal>apt-cache</" +"literal> specify the location of the respective programs." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:428 +msgid "" +"The configuration item <literal>RootDir</literal> has a special meaning. If " +"set, all paths in <literal>Dir::</literal> will be relative to " +"<literal>RootDir</literal>, <emphasis>even paths that are specified " +"absolutely</emphasis>. So, for instance, if <literal>RootDir</literal> is " +"set to <filename>/tmp/staging</filename> and <literal>Dir::State::status</" +"literal> is set to <filename>/var/lib/dpkg/status</filename>, then the " +"status file will be looked up in <filename>/tmp/staging/var/lib/dpkg/status</" +"filename>." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt.conf.5.xml:441 +#, fuzzy +msgid "APT in DSelect" +msgstr "DSelect" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:443 +msgid "" +"When APT is used as a &dselect; method several configuration directives " +"control the default behaviour. These are in the <literal>DSelect</literal> " +"section." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:447 +msgid "Clean" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:448 +msgid "" +"Cache Clean mode; this value may be one of always, prompt, auto, pre-auto " +"and never. always and prompt will remove all packages from the cache after " +"upgrading, prompt (the default) does so conditionally. auto removes only " +"those packages which are no longer downloadable (replaced with a new version " +"for instance). pre-auto performs this action before downloading new " +"packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:457 +msgid "" +"The contents of this variable is passed to &apt-get; as command line options " +"when it is run for the install phase." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:461 +msgid "Updateoptions" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:462 +msgid "" +"The contents of this variable is passed to &apt-get; as command line options " +"when it is run for the update phase." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:466 +msgid "PromptAfterUpdate" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:467 +msgid "" +"If true the [U]pdate operation in &dselect; will always prompt to continue. " +"The default is to prompt only on error." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt.conf.5.xml:473 +msgid "How APT calls dpkg" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:474 +msgid "" +"Several configuration directives control how APT invokes &dpkg;. These are " +"in the <literal>DPkg</literal> section." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:479 +msgid "" +"This is a list of options to pass to dpkg. The options must be specified " +"using the list notation and each list item is passed as a single argument to " +"&dpkg;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:484 +msgid "Pre-Invoke" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:484 +msgid "Post-Invoke" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:485 +msgid "" +"This is a list of shell commands to run before/after invoking &dpkg;. Like " +"<literal>options</literal> this must be specified in list notation. The " +"commands are invoked in order using <filename>/bin/sh</filename>, should any " +"fail APT will abort." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:491 +msgid "Pre-Install-Pkgs" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:492 +msgid "" +"This is a list of shell commands to run before invoking dpkg. Like " +"<literal>options</literal> this must be specified in list notation. The " +"commands are invoked in order using <filename>/bin/sh</filename>, should any " +"fail APT will abort. APT will pass to the commands on standard input the " +"filenames of all .deb files it is going to install, one per line." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:498 +msgid "" +"Version 2 of this protocol dumps more information, including the protocol " +"version, the APT configuration space and the packages, files and versions " +"being changed. Version 2 is enabled by setting <literal>DPkg::Tools::" +"options::cmd::Version</literal> to 2. <literal>cmd</literal> is a command " +"given to <literal>Pre-Install-Pkgs</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:505 +msgid "Run-Directory" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:506 +msgid "" +"APT chdirs to this directory before invoking dpkg, the default is <filename>/" +"</filename>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:510 +msgid "Build-options" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:511 +msgid "" +"These options are passed to &dpkg-buildpackage; when compiling packages, the " +"default is to disable signing and produce all binaries." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt.conf.5.xml:516 +msgid "dpkg trigger usage (and related options)" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt.conf.5.xml:517 +msgid "" +"APT can call dpkg in a way so it can make aggressive use of triggers over " +"multiply calls of dpkg. Without further options dpkg will use triggers only " +"in between his own run. Activating these options can therefore decrease the " +"time needed to perform the install / upgrade. Note that it is intended to " +"activate these options per default in the future, but as it changes the way " +"APT calling dpkg drastically it needs a lot more testing. <emphasis>These " +"options are therefore currently experimental and should not be used in " +"productive environments.</emphasis> Also it breaks the progress reporting so " +"all frontends will currently stay around half (or more) of the time in the " +"100% state while it actually configures all packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><literallayout> +#: apt.conf.5.xml:532 +#, no-wrap +msgid "" +"DPkg::NoTriggers \"true\";\n" +"PackageManager::Configure \"smart\";\n" +"DPkg::ConfigurePending \"true\";\n" +"DPkg::TriggersPending \"true\";" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt.conf.5.xml:526 +msgid "" +"Note that it is not guaranteed that APT will support these options or that " +"these options will not cause (big) trouble in the future. If you have " +"understand the current risks and problems with these options, but are brave " +"enough to help testing them create a new configuration file and test a " +"combination of options. Please report any bugs, problems and improvements " +"you encounter and make sure to note which options you have used in your " +"reports. Asking dpkg for help could also be useful for debugging proposes, " +"see e.g. <command>dpkg --audit</command>. A defensive option combination " +"would be <placeholder type=\"literallayout\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt.conf.5.xml:538 +msgid "DPkg::NoTriggers" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:539 +msgid "" +"Add the no triggers flag to all dpkg calls (except the ConfigurePending " +"call). See &dpkg; if you are interested in what this actually means. In " +"short: dpkg will not run the triggers when this flag is present unless it is " +"explicitly called to do so in an extra call. Note that this option exists " +"(undocumented) also in older apt versions with a slightly different meaning: " +"Previously these option only append --no-triggers to the configure calls to " +"dpkg - now apt will add these flag also to the unpack and remove calls." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt.conf.5.xml:546 +msgid "PackageManager::Configure" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:547 +msgid "" +"Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " +"and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default " +"value and causes APT to configure all packages explicit. The " +"\"<literal>smart</literal>\" way is it to configure only packages which need " +"to be configured before another package can be unpacked (Pre-Depends) and " +"let the rest configure by dpkg with a call generated by the next option. " +"\"<literal>no</literal>\" on the other hand will not configure anything and " +"totally rely on dpkg for configuration (which will at the moment fail if a " +"Pre-Depends is encountered). Setting this option to another than the all " +"value will implicitly activate also the next option per default as otherwise " +"the system could end in an unconfigured status which could be unbootable!" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt.conf.5.xml:557 +msgid "DPkg::ConfigurePending" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:558 +msgid "" +"If this option is set apt will call <command>dpkg --configure --pending</" +"command> to let dpkg handle all required configurations and triggers. This " +"option is activated automatic per default if the previous option is not set " +"to <literal>all</literal>, but deactivating could be useful if you want to " +"run APT multiple times in a row - e.g. in an installer. In these sceneries " +"you could deactivate this option in all but the last run." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt.conf.5.xml:564 +msgid "DPkg::TriggersPending" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:565 +msgid "" +"Useful for <literal>smart</literal> configuration as a package which has " +"pending triggers is not considered as <literal>installed</literal> and dpkg " +"treats them as <literal>unpacked</literal> currently which is a dealbreaker " +"for Pre-Dependencies (see debbugs #526774). Note that this will process all " +"triggers, not only the triggers needed to configure this package." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt.conf.5.xml:570 +msgid "PackageManager::UnpackAll" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:571 +msgid "" +"As the configuration can be deferred to be done at the end by dpkg it can be " +"tried to order the unpack series only by critical needs, e.g. by Pre-" +"Depends. Default is true and therefore the \"old\" method of ordering in " +"various steps by everything. While both method were present in earlier APT " +"versions the <literal>OrderCritical</literal> method was unused, so this " +"method is very experimental and needs further improvements before becoming " +"really useful." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt.conf.5.xml:578 +msgid "OrderList::Score::Immediate" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout> +#: apt.conf.5.xml:586 +#, no-wrap +msgid "" +"OrderList::Score {\n" +"\tDelete 500;\n" +"\tEssential 200;\n" +"\tImmediate 10;\n" +"\tPreDepends 50;\n" +"};" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:579 +msgid "" +"Essential packages (and there dependencies) should be configured immediately " +"after unpacking. It will be a good idea to do this quite early in the " +"upgrade process as these these configure calls require currently also " +"<literal>DPkg::TriggersPending</literal> which will run quite a few triggers " +"(which maybe not needed). Essentials get per default a high score but the " +"immediate flag is relatively low (a package which has a Pre-Depends is " +"higher rated). These option and the others in the same group can be used to " +"change the scoring. The following example shows the settings with there " +"default values. <placeholder type=\"literallayout\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt.conf.5.xml:599 +msgid "Periodic and Archives options" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:600 +msgid "" +"<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups " +"of options configure behavior of apt periodic updates, which is done by " +"<literal>/etc/cron.daily/apt</literal> script. See header of this script for " +"the brief documentation of these options." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt.conf.5.xml:608 +msgid "Debug options" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:610 +msgid "" +"Enabling options in the <literal>Debug::</literal> section will cause " +"debugging information to be sent to the standard error stream of the program " +"utilizing the <literal>apt</literal> libraries, or enable special program " +"modes that are primarily useful for debugging the behavior of <literal>apt</" +"literal>. Most of these options are not interesting to a normal user, but a " +"few may be:" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> +#: apt.conf.5.xml:621 +msgid "" +"<literal>Debug::pkgProblemResolver</literal> enables output about the " +"decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</" +"literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> +#: apt.conf.5.xml:629 +msgid "" +"<literal>Debug::NoLocking</literal> disables all file locking. This can be " +"used to run some operations (for instance, <literal>apt-get -s install</" +"literal>) as a non-root user." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> +#: apt.conf.5.xml:638 +msgid "" +"<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each " +"time that <literal>apt</literal> invokes &dpkg;." +msgstr "" + +#. TODO: provide a +#. motivating example, except I haven't a clue why you'd want +#. to do this. +#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> +#: apt.conf.5.xml:646 +msgid "" +"<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data " +"in CDROM IDs." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:656 +msgid "A full list of debugging options to apt follows." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:661 +msgid "<literal>Debug::Acquire::cdrom</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:665 +msgid "" +"Print information related to accessing <literal>cdrom://</literal> sources." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:672 +msgid "<literal>Debug::Acquire::ftp</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:676 +msgid "Print information related to downloading packages using FTP." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:683 +msgid "<literal>Debug::Acquire::http</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:687 +msgid "Print information related to downloading packages using HTTP." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:694 +msgid "<literal>Debug::Acquire::https</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:698 +msgid "Print information related to downloading packages using HTTPS." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:705 +msgid "<literal>Debug::Acquire::gpgv</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:709 +msgid "" +"Print information related to verifying cryptographic signatures using " +"<literal>gpg</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:716 +msgid "<literal>Debug::aptcdrom</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:720 +msgid "" +"Output information about the process of accessing collections of packages " +"stored on CD-ROMs." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:727 +msgid "<literal>Debug::BuildDeps</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:730 +msgid "Describes the process of resolving build-dependencies in &apt-get;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:737 +msgid "<literal>Debug::Hashes</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:740 +msgid "" +"Output each cryptographic hash that is generated by the <literal>apt</" +"literal> libraries." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:747 +msgid "<literal>Debug::IdentCDROM</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:750 +msgid "" +"Do not include information from <literal>statfs</literal>, namely the number " +"of used and free blocks on the CD-ROM filesystem, when generating an ID for " +"a CD-ROM." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:758 +msgid "<literal>Debug::NoLocking</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:761 +msgid "" +"Disable all file locking. For instance, this will allow two instances of " +"<quote><literal>apt-get update</literal></quote> to run at the same time." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:769 +msgid "<literal>Debug::pkgAcquire</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:773 +msgid "Log when items are added to or removed from the global download queue." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:780 +msgid "<literal>Debug::pkgAcquire::Auth</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:783 +msgid "" +"Output status messages and errors related to verifying checksums and " +"cryptographic signatures of downloaded files." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:790 +msgid "<literal>Debug::pkgAcquire::Diffs</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:793 +msgid "" +"Output information about downloading and applying package index list diffs, " +"and errors relating to package index list diffs." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:801 +msgid "<literal>Debug::pkgAcquire::RRed</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:805 +msgid "" +"Output information related to patching apt package lists when downloading " +"index diffs instead of full indices." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:812 +msgid "<literal>Debug::pkgAcquire::Worker</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:816 +msgid "" +"Log all interactions with the sub-processes that actually perform downloads." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:823 +msgid "<literal>Debug::pkgAutoRemove</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:827 +msgid "" +"Log events related to the automatically-installed status of packages and to " +"the removal of unused packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:834 +msgid "<literal>Debug::pkgDepCache::AutoInstall</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:837 +msgid "" +"Generate debug messages describing which packages are being automatically " +"installed to resolve dependencies. This corresponds to the initial auto-" +"install pass performed in, e.g., <literal>apt-get install</literal>, and not " +"to the full <literal>apt</literal> dependency resolver; see <literal>Debug::" +"pkgProblemResolver</literal> for that." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:848 +msgid "<literal>Debug::pkgDepCache::Marker</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:851 +msgid "" +"Generate debug messages describing which package is marked as keep/install/" +"remove while the ProblemResolver does his work. Each addition or deletion " +"may trigger additional actions; they are shown indented two additional space " +"under the original entry. The format for each line is <literal>MarkKeep</" +"literal>, <literal>MarkDelete</literal> or <literal>MarkInstall</literal> " +"followed by <literal>package-name <a.b.c -> d.e.f | x.y.z> (section)" +"</literal> where <literal>a.b.c</literal> is the current version of the " +"package, <literal>d.e.f</literal> is the version considered for installation " +"and <literal>x.y.z</literal> is a newer version, but not considered for " +"installation (because of a low pin score). The later two can be omitted if " +"there is none or if it is the same version as the installed. " +"<literal>section</literal> is the name of the section the package appears in." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:870 +msgid "<literal>Debug::pkgInitConfig</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:873 +msgid "Dump the default configuration to standard error on startup." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:880 +msgid "<literal>Debug::pkgDPkgPM</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:883 +msgid "" +"When invoking &dpkg;, output the precise command line with which it is being " +"invoked, with arguments separated by a single space character." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:891 +msgid "<literal>Debug::pkgDPkgProgressReporting</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:894 +msgid "" +"Output all the data received from &dpkg; on the status file descriptor and " +"any errors encountered while parsing it." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:901 +msgid "<literal>Debug::pkgOrderList</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:905 +msgid "" +"Generate a trace of the algorithm that decides the order in which " +"<literal>apt</literal> should pass packages to &dpkg;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:913 +msgid "<literal>Debug::pkgPackageManager</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:917 +msgid "" +"Output status messages tracing the steps performed when invoking &dpkg;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:924 +msgid "<literal>Debug::pkgPolicy</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:928 +msgid "Output the priority of each package list on startup." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:934 +msgid "<literal>Debug::pkgProblemResolver</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:938 +msgid "" +"Trace the execution of the dependency resolver (this applies only to what " +"happens when a complex dependency problem is encountered)." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:946 +msgid "<literal>Debug::pkgProblemResolver::ShowScores</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:949 +msgid "" +"Display a list of all installed packages with their calculated score used by " +"the pkgProblemResolver. The description of the package is the same as " +"described in <literal>Debug::pkgDepCache::Marker</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:957 +msgid "<literal>Debug::sourceList</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:961 +msgid "" +"Print information about the vendors read from <filename>/etc/apt/vendors." +"list</filename>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:983 +msgid "" +"&configureindex; is a configuration file showing example values for all " +"possible options." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist> +#: apt.conf.5.xml:990 +msgid "&file-aptconf;" +msgstr "" + +#. ? reading apt.conf +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:995 +msgid "&apt-cache;, &apt-config;, &apt-preferences;." +msgstr "" + +#. The last update date +#. type: Content of: <refentry><refentryinfo> +#: apt_preferences.5.xml:13 +msgid "&apt-author.team; &apt-email; &apt-product; <date>04 May 2009</date>" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt_preferences.5.xml:21 apt_preferences.5.xml:28 +msgid "apt_preferences" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt_preferences.5.xml:29 +msgid "Preference control file for APT" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt_preferences.5.xml:34 +msgid "" +"The APT preferences file <filename>/etc/apt/preferences</filename> and the " +"fragment files in the <filename>/etc/apt/preferences.d/</filename> folder " +"can be used to control which versions of packages will be selected for " +"installation." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt_preferences.5.xml:39 +msgid "" +"Several versions of a package may be available for installation when the " +"&sources-list; file contains references to more than one distribution (for " +"example, <literal>stable</literal> and <literal>testing</literal>). APT " +"assigns a priority to each version that is available. Subject to dependency " +"constraints, <command>apt-get</command> selects the version with the highest " +"priority for installation. The APT preferences file overrides the " +"priorities that APT assigns to package versions by default, thus giving the " +"user control over which one is selected for installation." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt_preferences.5.xml:49 +msgid "" +"Several instances of the same version of a package may be available when the " +"&sources-list; file contains references to more than one source. In this " +"case <command>apt-get</command> downloads the instance listed earliest in " +"the &sources-list; file. The APT preferences file does not affect the " +"choice of instance, only the choice of version." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:56 +msgid "APT's Default Priority Assignments" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:71 +#, no-wrap +msgid "<command>apt-get install -t testing <replaceable>some-package</replaceable></command>\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:74 +#, no-wrap +msgid "APT::Default-Release \"stable\";\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:58 +msgid "" +"If there is no preferences file or if there is no entry in the file that " +"applies to a particular version then the priority assigned to that version " +"is the priority of the distribution to which that version belongs. It is " +"possible to single out a distribution, \"the target release\", which " +"receives a higher priority than other distributions do by default. The " +"target release can be set on the <command>apt-get</command> command line or " +"in the APT configuration file <filename>/etc/apt/apt.conf</filename>. Note " +"that this has precedence over any general priority you set in the <filename>/" +"etc/apt/preferences</filename> file described later, but not over " +"specifically pinned packages. For example, <placeholder type=" +"\"programlisting\" id=\"0\"/> <placeholder type=\"programlisting\" id=\"1\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:83 +msgid "priority 100" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:84 +msgid "to the version that is already installed (if any)." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:88 +msgid "priority 500" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:89 +msgid "" +"to the versions that are not installed and do not belong to the target " +"release." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:93 +msgid "priority 990" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:94 +msgid "" +"to the versions that are not installed and belong to the target release." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:78 +msgid "" +"If the target release has been specified then APT uses the following " +"algorithm to set the priorities of the versions of a package. Assign: " +"<placeholder type=\"variablelist\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:99 +msgid "" +"If the target release has not been specified then APT simply assigns " +"priority 100 to all installed package versions and priority 500 to all " +"uninstalled package versions." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:103 +msgid "" +"APT then applies the following rules, listed in order of precedence, to " +"determine which version of a package to install." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:106 +msgid "" +"Never downgrade unless the priority of an available version exceeds 1000. " +"(\"Downgrading\" is installing a less recent version of a package in place " +"of a more recent version. Note that none of APT's default priorities " +"exceeds 1000; such high priorities can only be set in the preferences file. " +"Note also that downgrading a package can be risky.)" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:112 +msgid "Install the highest priority version." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:113 +msgid "" +"If two or more versions have the same priority, install the most recent one " +"(that is, the one with the higher version number)." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:116 +msgid "" +"If two or more versions have the same priority and version number but either " +"the packages differ in some of their metadata or the <literal>--reinstall</" +"literal> option is given, install the uninstalled one." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:122 +msgid "" +"In a typical situation, the installed version of a package (priority 100) " +"is not as recent as one of the versions available from the sources listed in " +"the &sources-list; file (priority 500 or 990). Then the package will be " +"upgraded when <command>apt-get install <replaceable>some-package</" +"replaceable></command> or <command>apt-get upgrade</command> is executed." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:129 +msgid "" +"More rarely, the installed version of a package is <emphasis>more</emphasis> " +"recent than any of the other available versions. The package will not be " +"downgraded when <command>apt-get install <replaceable>some-package</" +"replaceable></command> or <command>apt-get upgrade</command> is executed." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:134 +msgid "" +"Sometimes the installed version of a package is more recent than the version " +"belonging to the target release, but not as recent as a version belonging to " +"some other distribution. Such a package will indeed be upgraded when " +"<command>apt-get install <replaceable>some-package</replaceable></command> " +"or <command>apt-get upgrade</command> is executed, because at least " +"<emphasis>one</emphasis> of the available versions has a higher priority " +"than the installed version." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:143 +msgid "The Effect of APT Preferences" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:145 +msgid "" +"The APT preferences file allows the system administrator to control the " +"assignment of priorities. The file consists of one or more multi-line " +"records separated by blank lines. Records can have one of two forms, a " +"specific form and a general form." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:151 +msgid "" +"The specific form assigns a priority (a \"Pin-Priority\") to one or more " +"specified packages and specified version or version range. For example, the " +"following record assigns a high priority to all versions of the " +"<filename>perl</filename> package whose version number begins with " +"\"<literal>5.8</literal>\". Multiple packages can be separated by spaces." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting> +#: apt_preferences.5.xml:158 +#, no-wrap +msgid "" +"Package: perl\n" +"Pin: version 5.8*\n" +"Pin-Priority: 1001\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:164 +msgid "" +"The general form assigns a priority to all of the package versions in a " +"given distribution (that is, to all the versions of packages that are listed " +"in a certain <filename>Release</filename> file) or to all of the package " +"versions coming from a particular Internet site, as identified by the site's " +"fully qualified domain name." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:170 +msgid "" +"This general-form entry in the APT preferences file applies only to groups " +"of packages. For example, the following record assigns a high priority to " +"all package versions available from the local site." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting> +#: apt_preferences.5.xml:175 +#, no-wrap +msgid "" +"Package: *\n" +"Pin: origin \"\"\n" +"Pin-Priority: 999\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:180 +msgid "" +"A note of caution: the keyword used here is \"<literal>origin</literal>\". " +"This should not be confused with the Origin of a distribution as specified " +"in a <filename>Release</filename> file. What follows the \"Origin:\" tag in " +"a <filename>Release</filename> file is not an Internet address but an author " +"or vendor name, such as \"Debian\" or \"Ximian\"." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:186 +msgid "" +"The following record assigns a low priority to all package versions " +"belonging to any distribution whose Archive name is \"<literal>unstable</" +"literal>\"." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting> +#: apt_preferences.5.xml:190 +#, no-wrap +msgid "" +"Package: *\n" +"Pin: release a=unstable\n" +"Pin-Priority: 50\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:195 +msgid "" +"The following record assigns a high priority to all package versions " +"belonging to any distribution whose Codename is \"<literal>squeeze</literal>" +"\"." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting> +#: apt_preferences.5.xml:199 +#, no-wrap +msgid "" +"Package: *\n" +"Pin: release n=squeeze\n" +"Pin-Priority: 900\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:204 +msgid "" +"The following record assigns a high priority to all package versions " +"belonging to any release whose Archive name is \"<literal>stable</literal>\" " +"and whose release Version number is \"<literal>3.0</literal>\"." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting> +#: apt_preferences.5.xml:209 +#, no-wrap +msgid "" +"Package: *\n" +"Pin: release a=stable, v=3.0\n" +"Pin-Priority: 500\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:220 +msgid "How APT Interprets Priorities" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:228 +msgid "P > 1000" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:229 +msgid "" +"causes a version to be installed even if this constitutes a downgrade of the " +"package" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:233 +msgid "990 < P <=1000" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:234 +msgid "" +"causes a version to be installed even if it does not come from the target " +"release, unless the installed version is more recent" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:239 +msgid "500 < P <=990" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:240 +msgid "" +"causes a version to be installed unless there is a version available " +"belonging to the target release or the installed version is more recent" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:245 +msgid "100 < P <=500" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:246 +msgid "" +"causes a version to be installed unless there is a version available " +"belonging to some other distribution or the installed version is more recent" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:251 +msgid "0 < P <=100" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:252 +msgid "" +"causes a version to be installed only if there is no installed version of " +"the package" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:256 +msgid "P < 0" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:257 +msgid "prevents the version from being installed" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:223 +msgid "" +"Priorities (P) assigned in the APT preferences file must be positive or " +"negative integers. They are interpreted as follows (roughly speaking): " +"<placeholder type=\"variablelist\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:262 +msgid "" +"If any specific-form records match an available package version then the " +"first such record determines the priority of the package version. Failing " +"that, if any general-form records match an available package version then " +"the first such record determines the priority of the package version." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:268 +msgid "" +"For example, suppose the APT preferences file contains the three records " +"presented earlier:" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><programlisting> +#: apt_preferences.5.xml:272 +#, no-wrap +msgid "" +"Package: perl\n" +"Pin: version 5.8*\n" +"Pin-Priority: 1001\n" +"\n" +"Package: *\n" +"Pin: origin \"\"\n" +"Pin-Priority: 999\n" +"\n" +"Package: *\n" +"Pin: release unstable\n" +"Pin-Priority: 50\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:285 +msgid "Then:" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:287 +msgid "" +"The most recent available version of the <literal>perl</literal> package " +"will be installed, so long as that version's version number begins with " +"\"<literal>5.8</literal>\". If <emphasis>any</emphasis> 5.8* version of " +"<literal>perl</literal> is available and the installed version is 5.9*, then " +"<literal>perl</literal> will be downgraded." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:292 +msgid "" +"A version of any package other than <literal>perl</literal> that is " +"available from the local system has priority over other versions, even " +"versions belonging to the target release." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:296 +msgid "" +"A version of a package whose origin is not the local system but some other " +"site listed in &sources-list; and which belongs to an <literal>unstable</" +"literal> distribution is only installed if it is selected for installation " +"and no version of the package is already installed." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:306 +msgid "Determination of Package Version and Distribution Properties" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:308 +msgid "" +"The locations listed in the &sources-list; file should provide " +"<filename>Packages</filename> and <filename>Release</filename> files to " +"describe the packages available at that location." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:320 +msgid "the <literal>Package:</literal> line" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:321 +msgid "gives the package name" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:324 apt_preferences.5.xml:374 +msgid "the <literal>Version:</literal> line" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:325 +msgid "gives the version number for the named package" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:312 +msgid "" +"The <filename>Packages</filename> file is normally found in the directory " +"<filename>.../dists/<replaceable>dist-name</replaceable>/" +"<replaceable>component</replaceable>/<replaceable>arch</replaceable></" +"filename>: for example, <filename>.../dists/stable/main/binary-i386/" +"Packages</filename>. It consists of a series of multi-line records, one for " +"each package available in that directory. Only two lines in each record are " +"relevant for setting APT priorities: <placeholder type=\"variablelist\" id=" +"\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:341 +msgid "the <literal>Archive:</literal> or <literal>Suite:</literal> line" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:342 +msgid "" +"names the archive to which all the packages in the directory tree belong. " +"For example, the line \"Archive: stable\" or \"Suite: stable\" specifies " +"that all of the packages in the directory tree below the parent of the " +"<filename>Release</filename> file are in a <literal>stable</literal> " +"archive. Specifying this value in the APT preferences file would require " +"the line:" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting> +#: apt_preferences.5.xml:352 +#, no-wrap +msgid "Pin: release a=stable\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:358 +msgid "the <literal>Codename:</literal> line" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:359 +msgid "" +"names the codename to which all the packages in the directory tree belong. " +"For example, the line \"Codename: squeeze\" specifies that all of the " +"packages in the directory tree below the parent of the <filename>Release</" +"filename> file belong to a version named <literal>squeeze</literal>. " +"Specifying this value in the APT preferences file would require the line:" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting> +#: apt_preferences.5.xml:368 +#, no-wrap +msgid "Pin: release n=squeeze\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:375 +msgid "" +"names the release version. For example, the packages in the tree might " +"belong to Debian GNU/Linux release version 3.0. Note that there is normally " +"no version number for the <literal>testing</literal> and <literal>unstable</" +"literal> distributions because they have not been released yet. Specifying " +"this in the APT preferences file would require one of the following lines." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting> +#: apt_preferences.5.xml:384 +#, no-wrap +msgid "" +"Pin: release v=3.0\n" +"Pin: release a=stable, v=3.0\n" +"Pin: release 3.0\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:393 +msgid "the <literal>Component:</literal> line" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:394 +msgid "" +"names the licensing component associated with the packages in the directory " +"tree of the <filename>Release</filename> file. For example, the line " +"\"Component: main\" specifies that all the packages in the directory tree " +"are from the <literal>main</literal> component, which entails that they are " +"licensed under terms listed in the Debian Free Software Guidelines. " +"Specifying this component in the APT preferences file would require the line:" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting> +#: apt_preferences.5.xml:403 +#, no-wrap +msgid "Pin: release c=main\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:409 +msgid "the <literal>Origin:</literal> line" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:410 +msgid "" +"names the originator of the packages in the directory tree of the " +"<filename>Release</filename> file. Most commonly, this is <literal>Debian</" +"literal>. Specifying this origin in the APT preferences file would require " +"the line:" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting> +#: apt_preferences.5.xml:416 +#, no-wrap +msgid "Pin: release o=Debian\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:422 +msgid "the <literal>Label:</literal> line" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:423 +msgid "" +"names the label of the packages in the directory tree of the " +"<filename>Release</filename> file. Most commonly, this is <literal>Debian</" +"literal>. Specifying this label in the APT preferences file would require " +"the line:" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting> +#: apt_preferences.5.xml:429 +#, no-wrap +msgid "Pin: release l=Debian\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:330 +msgid "" +"The <filename>Release</filename> file is normally found in the directory " +"<filename>.../dists/<replaceable>dist-name</replaceable></filename>: for " +"example, <filename>.../dists/stable/Release</filename>, or <filename>.../" +"dists/woody/Release</filename>. It consists of a single multi-line record " +"which applies to <emphasis>all</emphasis> of the packages in the directory " +"tree below its parent. Unlike the <filename>Packages</filename> file, " +"nearly all of the lines in a <filename>Release</filename> file are relevant " +"for setting APT priorities: <placeholder type=\"variablelist\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:436 +msgid "" +"All of the <filename>Packages</filename> and <filename>Release</filename> " +"files retrieved from locations listed in the &sources-list; file are stored " +"in the directory <filename>/var/lib/apt/lists</filename>, or in the file " +"named by the variable <literal>Dir::State::Lists</literal> in the " +"<filename>apt.conf</filename> file. For example, the file <filename>debian." +"lcs.mit.edu_debian_dists_unstable_contrib_binary-i386_Release</filename> " +"contains the <filename>Release</filename> file retrieved from the site " +"<literal>debian.lcs.mit.edu</literal> for <literal>binary-i386</literal> " +"architecture files from the <literal>contrib</literal> component of the " +"<literal>unstable</literal> distribution." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:449 +msgid "Optional Lines in an APT Preferences Record" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:451 +msgid "" +"Each record in the APT preferences file can optionally begin with one or " +"more lines beginning with the word <literal>Explanation:</literal>. This " +"provides a place for comments." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:455 +msgid "" +"The <literal>Pin-Priority:</literal> line in each APT preferences record is " +"optional. If omitted, APT assigns a priority of 1 less than the last value " +"specified on a line beginning with <literal>Pin-Priority: release ...</" +"literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:464 +msgid "Tracking Stable" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:472 +#, no-wrap +msgid "" +"Explanation: Uninstall or do not install any Debian-originated\n" +"Explanation: package versions other than those in the stable distro\n" +"Package: *\n" +"Pin: release a=stable\n" +"Pin-Priority: 900\n" +"\n" +"Package: *\n" +"Pin: release o=Debian\n" +"Pin-Priority: -10\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:466 +msgid "" +"The following APT preferences file will cause APT to assign a priority " +"higher than the default (500) to all package versions belonging to a " +"<literal>stable</literal> distribution and a prohibitively low priority to " +"package versions belonging to other <literal>Debian</literal> " +"distributions. <placeholder type=\"programlisting\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:489 apt_preferences.5.xml:535 +#: apt_preferences.5.xml:593 +#, no-wrap +msgid "" +"apt-get install <replaceable>package-name</replaceable>\n" +"apt-get upgrade\n" +"apt-get dist-upgrade\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:484 +msgid "" +"With a suitable &sources-list; file and the above preferences file, any of " +"the following commands will cause APT to upgrade to the latest " +"<literal>stable</literal> version(s). <placeholder type=\"programlisting\" " +"id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:501 +#, no-wrap +msgid "apt-get install <replaceable>package</replaceable>/testing\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:495 +msgid "" +"The following command will cause APT to upgrade the specified package to the " +"latest version from the <literal>testing</literal> distribution; the package " +"will not be upgraded again unless this command is given again. <placeholder " +"type=\"programlisting\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:507 +msgid "Tracking Testing or Unstable" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:516 +#, no-wrap +msgid "" +"Package: *\n" +"Pin: release a=testing\n" +"Pin-Priority: 900\n" +"\n" +"Package: *\n" +"Pin: release a=unstable\n" +"Pin-Priority: 800\n" +"\n" +"Package: *\n" +"Pin: release o=Debian\n" +"Pin-Priority: -10\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:509 +msgid "" +"The following APT preferences file will cause APT to assign a high priority " +"to package versions from the <literal>testing</literal> distribution, a " +"lower priority to package versions from the <literal>unstable</literal> " +"distribution, and a prohibitively low priority to package versions from " +"other <literal>Debian</literal> distributions. <placeholder type=" +"\"programlisting\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:530 +msgid "" +"With a suitable &sources-list; file and the above preferences file, any of " +"the following commands will cause APT to upgrade to the latest " +"<literal>testing</literal> version(s). <placeholder type=\"programlisting\" " +"id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:550 +#, no-wrap +msgid "apt-get install <replaceable>package</replaceable>/unstable\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:541 +msgid "" +"The following command will cause APT to upgrade the specified package to the " +"latest version from the <literal>unstable</literal> distribution. " +"Thereafter, <command>apt-get upgrade</command> will upgrade the package to " +"the most recent <literal>testing</literal> version if that is more recent " +"than the installed version, otherwise, to the most recent <literal>unstable</" +"literal> version if that is more recent than the installed version. " +"<placeholder type=\"programlisting\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:557 +msgid "Tracking the evolution of a codename release" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:571 +#, no-wrap +msgid "" +"Explanation: Uninstall or do not install any Debian-originated package versions\n" +"Explanation: other than those in the distribution codenamed with squeeze or sid\n" +"Package: *\n" +"Pin: release n=squeeze\n" +"Pin-Priority: 900\n" +"\n" +"Explanation: Debian unstable is always codenamed with sid\n" +"Package: *\n" +"Pin: release a=sid\n" +"Pin-Priority: 800\n" +"\n" +"Package: *\n" +"Pin: release o=Debian\n" +"Pin-Priority: -10\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:559 +msgid "" +"The following APT preferences file will cause APT to assign a priority " +"higher than the default (500) to all package versions belonging to a " +"specified codename of a distribution and a prohibitively low priority to " +"package versions belonging to other <literal>Debian</literal> distributions, " +"codenames and archives. Note that with this APT preference APT will follow " +"the migration of a release from the archive <literal>testing</literal> to " +"<literal>stable</literal> and later <literal>oldstable</literal>. If you " +"want to follow for example the progress in <literal>testing</literal> " +"notwithstanding the codename changes you should use the example " +"configurations above. <placeholder type=\"programlisting\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:588 +msgid "" +"With a suitable &sources-list; file and the above preferences file, any of " +"the following commands will cause APT to upgrade to the latest version(s) in " +"the release codenamed with <literal>squeeze</literal>. <placeholder type=" +"\"programlisting\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:608 +#, no-wrap +msgid "apt-get install <replaceable>package</replaceable>/sid\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:599 +msgid "" +"The following command will cause APT to upgrade the specified package to the " +"latest version from the <literal>sid</literal> distribution. Thereafter, " +"<command>apt-get upgrade</command> will upgrade the package to the most " +"recent <literal>squeeze</literal> version if that is more recent than the " +"installed version, otherwise, to the most recent <literal>sid</literal> " +"version if that is more recent than the installed version. <placeholder " +"type=\"programlisting\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist> +#: apt_preferences.5.xml:617 +msgid "&file-preferences;" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt_preferences.5.xml:623 +msgid "&apt-get; &apt-cache; &apt-conf; &sources-list;" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: sources.list.5.xml:22 sources.list.5.xml:29 +msgid "sources.list" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: sources.list.5.xml:30 +msgid "Package resource list for APT" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:34 +msgid "" +"The package resource list is used to locate archives of the package " +"distribution system in use on the system. At this time, this manual page " +"documents only the packaging system used by the Debian GNU/Linux system. " +"This control file is <filename>/etc/apt/sources.list</filename>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:39 +msgid "" +"The source list is designed to support any number of active sources and a " +"variety of source media. The file lists one source per line, with the most " +"preferred source listed first. The format of each line is: <literal>type uri " +"args</literal> The first item, <literal>type</literal> determines the format " +"for <literal>args</literal>. <literal>uri</literal> is a Universal Resource " +"Identifier (URI), which is a superset of the more specific and well-known " +"Universal Resource Locator, or URL. The rest of the line can be marked as a " +"comment by using a #." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: sources.list.5.xml:50 +msgid "sources.list.d" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:51 +msgid "" +"The <filename>/etc/apt/sources.list.d</filename> directory provides a way to " +"add sources.list entries in separate files. The format is the same as for " +"the regular <filename>sources.list</filename> file. File names need to end " +"with <filename>.list</filename> and may only contain letters (a-z and A-Z), " +"digits (0-9), underscore (_), hyphen (-) and period (.) characters. " +"Otherwise they will be silently ignored." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: sources.list.5.xml:60 +msgid "The deb and deb-src types" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:61 +msgid "" +"The <literal>deb</literal> type describes a typical two-level Debian " +"archive, <filename>distribution/component</filename>. Typically, " +"<literal>distribution</literal> is generally one of <literal>stable</" +"literal> <literal>unstable</literal> or <literal>testing</literal> while " +"component is one of <literal>main</literal> <literal>contrib</literal> " +"<literal>non-free</literal> or <literal>non-us</literal>. The <literal>deb-" +"src</literal> type describes a debian distribution's source code in the same " +"form as the <literal>deb</literal> type. A <literal>deb-src</literal> line " +"is required to fetch source indexes." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:73 +msgid "" +"The format for a <filename>sources.list</filename> entry using the " +"<literal>deb</literal> and <literal>deb-src</literal> types is:" +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:76 +#, no-wrap +msgid "deb uri distribution [component1] [component2] [...]" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:78 +msgid "" +"The URI for the <literal>deb</literal> type must specify the base of the " +"Debian distribution, from which APT will find the information it needs. " +"<literal>distribution</literal> can specify an exact path, in which case the " +"components must be omitted and <literal>distribution</literal> must end with " +"a slash (/). This is useful for when the case only a particular sub-section " +"of the archive denoted by the URI is of interest. If <literal>distribution</" +"literal> does not specify an exact path, at least one <literal>component</" +"literal> must be present." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:87 +msgid "" +"<literal>distribution</literal> may also contain a variable, <literal>$(ARCH)" +"</literal> which expands to the Debian architecture (i386, m68k, " +"powerpc, ...) used on the system. This permits architecture-independent " +"<filename>sources.list</filename> files to be used. In general this is only " +"of interest when specifying an exact path, <literal>APT</literal> will " +"automatically generate a URI with the current architecture otherwise." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:95 +msgid "" +"Since only one distribution can be specified per line it may be necessary to " +"have multiple lines for the same URI, if a subset of all available " +"distributions or components at that location is desired. APT will sort the " +"URI list after it has generated a complete set internally, and will collapse " +"multiple references to the same Internet host, for instance, into a single " +"connection, so that it does not inefficiently establish an FTP connection, " +"close it, do something else, and then re-establish a connection to that same " +"host. This feature is useful for accessing busy FTP sites with limits on the " +"number of simultaneous anonymous users. APT also parallelizes connections to " +"different hosts to more effectively deal with sites with low bandwidth." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:107 +msgid "" +"It is important to list sources in order of preference, with the most " +"preferred source listed first. Typically this will result in sorting by " +"speed from fastest to slowest (CD-ROM followed by hosts on a local network, " +"followed by distant Internet hosts, for example)." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:112 +msgid "Some examples:" +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:114 +#, no-wrap +msgid "" +"deb http://http.us.debian.org/debian stable main contrib non-free\n" +"deb http://http.us.debian.org/debian dists/stable-updates/\n" +" " +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: sources.list.5.xml:120 +msgid "URI specification" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: sources.list.5.xml:125 +msgid "file" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:127 +msgid "" +"The file scheme allows an arbitrary directory in the file system to be " +"considered an archive. This is useful for NFS mounts and local mirrors or " +"archives." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:134 +msgid "" +"The cdrom scheme allows APT to use a local CDROM drive with media swapping. " +"Use the &apt-cdrom; program to create cdrom entries in the source list." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:141 +msgid "" +"The http scheme specifies an HTTP server for the archive. If an environment " +"variable <envar>http_proxy</envar> is set with the format http://server:" +"port/, the proxy server specified in <envar>http_proxy</envar> will be used. " +"Users of authenticated HTTP/1.1 proxies may use a string of the format " +"http://user:pass@server:port/. Note that this is an insecure method of " +"authentication." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:152 +msgid "" +"The ftp scheme specifies an FTP server for the archive. APT's FTP behavior " +"is highly configurable; for more information see the &apt-conf; manual page. " +"Please note that a ftp proxy can be specified by using the <envar>ftp_proxy</" +"envar> environment variable. It is possible to specify a http proxy (http " +"proxy servers often understand ftp urls) using this method and ONLY this " +"method. ftp proxies using http specified in the configuration file will be " +"ignored." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: sources.list.5.xml:161 +msgid "copy" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:163 +msgid "" +"The copy scheme is identical to the file scheme except that packages are " +"copied into the cache directory instead of used directly at their location. " +"This is useful for people using a zip disk to copy files around with APT." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: sources.list.5.xml:168 +msgid "rsh" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: sources.list.5.xml:168 +msgid "ssh" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:170 +msgid "" +"The rsh/ssh method invokes rsh/ssh to connect to a remote host as a given " +"user and access the files. It is a good idea to do prior arrangements with " +"RSA keys or rhosts. Access to files on the remote uses standard " +"<command>find</command> and <command>dd</command> commands to perform the " +"file transfers from the remote." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: sources.list.5.xml:178 +msgid "more recongnizable URI types" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:180 +msgid "" +"APT can be extended with more methods shipped in other optional packages " +"which should follow the nameing scheme <literal>apt-transport-" +"<replaceable>method</replaceable></literal>. The APT team e.g. maintain " +"also the <literal>apt-transport-https</literal> package which provides " +"access methods for https-URIs with features similiar to the http method, but " +"other methods for using e.g. debtorrent are also available, see " +"<citerefentry> <refentrytitle><filename>apt-transport-debtorrent</filename></" +"refentrytitle> <manvolnum>1</manvolnum></citerefentry>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:122 +msgid "" +"The currently recognized URI types are cdrom, file, http, ftp, copy, ssh, " +"rsh. <placeholder type=\"variablelist\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:194 +msgid "" +"Uses the archive stored locally (or NFS mounted) at /home/jason/debian for " +"stable/main, stable/contrib, and stable/non-free." +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:196 +#, no-wrap +msgid "deb file:/home/jason/debian stable main contrib non-free" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:198 +msgid "As above, except this uses the unstable (development) distribution." +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:199 +#, no-wrap +msgid "deb file:/home/jason/debian unstable main contrib non-free" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:201 +msgid "Source line for the above" +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:202 +#, no-wrap +msgid "deb-src file:/home/jason/debian unstable main contrib non-free" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:204 +msgid "" +"Uses HTTP to access the archive at archive.debian.org, and uses only the " +"hamm/main area." +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:206 +#, no-wrap +msgid "deb http://archive.debian.org/debian-archive hamm main" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:208 +msgid "" +"Uses FTP to access the archive at ftp.debian.org, under the debian " +"directory, and uses only the stable/contrib area." +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:210 +#, no-wrap +msgid "deb ftp://ftp.debian.org/debian stable contrib" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:212 +msgid "" +"Uses FTP to access the archive at ftp.debian.org, under the debian " +"directory, and uses only the unstable/contrib area. If this line appears as " +"well as the one in the previous example in <filename>sources.list</filename> " +"a single FTP session will be used for both resource lines." +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:216 +#, no-wrap +msgid "deb ftp://ftp.debian.org/debian unstable contrib" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:218 +msgid "" +"Uses HTTP to access the archive at nonus.debian.org, under the debian-non-US " +"directory." +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:220 +#, no-wrap +msgid "deb http://nonus.debian.org/debian-non-US stable/non-US main contrib non-free" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><literallayout> +#: sources.list.5.xml:229 +#, no-wrap +msgid "deb http://ftp.de.debian.org/debian-non-US unstable/binary-$(ARCH)/" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:222 +msgid "" +"Uses HTTP to access the archive at nonus.debian.org, under the debian-non-US " +"directory, and uses only files found under <filename>unstable/binary-i386</" +"filename> on i386 machines, <filename>unstable/binary-m68k</filename> on " +"m68k, and so forth for other supported architectures. [Note this example " +"only illustrates how to use the substitution variable; non-us is no longer " +"structured like this] <placeholder type=\"literallayout\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:234 +msgid "&apt-cache; &apt-conf;" +msgstr "" + +#. type: <title> +#: guide.sgml:4 +#, fuzzy +msgid "APT User's Guide" +msgstr "Guida dell'utente di APT" + +#. type: +#: guide.sgml:6 offline.sgml:6 +#, fuzzy +msgid "Jason Gunthorpe jgg@debian.org" +msgstr "Jason Gunthorpe jgg@debian.org" + +#. type: +#: guide.sgml:7 +#, fuzzy +msgid "$Id: guide.sgml,v 1.7 2003/04/26 23:26:13 doogie Exp $" +msgstr "$Id: guide.it.sgml,v 1.5 2003/04/26 23:26:13 doogie Exp $" + +#. type: +#: guide.sgml:11 +#, fuzzy +msgid "" +"This document provides an overview of how to use the the APT package manager." +msgstr "Guida per l'uso del gestore di pacchetti APT." + +#. type: +#: guide.sgml:15 +#, fuzzy +msgid "Copyright © Jason Gunthorpe, 1998." +msgstr "Copyright © Jason Gunthorpe, 1998." + +#. type:

+#: guide.sgml:21 offline.sgml:22 +#, fuzzy +msgid "" +"\"APT\" and this document are free software; you can redistribute them and/" +"or modify them under the terms of the GNU General Public License as " +"published by the Free Software Foundation; either version 2 of the License, " +"or (at your option) any later version." +msgstr "" +"\"APT\" e questo documento sono software libero, e li si può ridistribuire e/" +"o modificare secondo i termini della Licenza Pubblica Generica GNU (GPL), " +"pubblicata dalla Free Software Foundation, nella versione 2 o (se preferite) " +"qualsiasi versione successiva." + +#. type:

+#: guide.sgml:24 offline.sgml:25 +#, fuzzy +msgid "" +"For more details, on Debian GNU/Linux systems, see the file /usr/share/" +"common-licenses/GPL for the full license." +msgstr "" +"Per ulteriori dettagli sui sistemi GNU/Linux si veda il testo completo della " +"licenza nel file /usr/share/common-licenses/GPL." + +#. type: +#: guide.sgml:32 +#, fuzzy +msgid "General" +msgstr "Descrizione generale" + +#. type:

+#: guide.sgml:38 +#, fuzzy +msgid "" +"The APT package currently contains two sections, the APT dselect method and the apt-get command line user interface. Both " +"provide a way to install and remove packages as well as download new " +"packages from the Internet." +msgstr "" +"Il pacchetto APT al momento contiene due sezioni, il metodo APT " +"dselect e l'interfaccia utente a linea di comando apt-" +"get; entrambi danno modo di installare e rimuovere pacchetti, e di " +"scaricarne altri da Internet." + +#. type: +#: guide.sgml:39 +#, fuzzy +msgid "Anatomy of the Package System" +msgstr "Anatomia del sistema di pacchettizzazione" + +#. type:

+#: guide.sgml:44 +#, fuzzy +msgid "" +"The Debian packaging system has a large amount of information associated " +"with each package to help assure that it integrates cleanly and easily into " +"the system. The most prominent of its features is the dependency system." +msgstr "" +"Il sistema di pacchettizzazione di Debian contiene un gran numero di " +"informazioni associate a ciascun pacchetto, per assicurarsi che si integri " +"facilmente ed in maniera pulita nel sistema; la più importante di esse è il " +"sistema di dipendenze." + +#. type:

+#: guide.sgml:52 +#, fuzzy +msgid "" +"The dependency system allows individual programs to make use of shared " +"elements in the system such as libraries. It simplifies placing infrequently " +"used portions of a program in separate packages to reduce the number of " +"things the average user is required to install. Also, it allows for choices " +"in mail transport agents, X servers and so on." +msgstr "" +"Il sistema di dipendenze permette ai singoli programmi di fare uso degli " +"elementi condivisi del sistema, quali le librerie; per ridurre il numero di " +"elementi che l'utente medio debba installare, le porzioni di programmi che " +"non vengono usate spesso vengono poste in pacchetti separati. Inoltre, è " +"possibile avere più di una scelta per cose quali i programmi di posta " +"elettronica, i server X e così via." + +#. type:

+#: guide.sgml:57 +#, fuzzy +msgid "" +"The first step to understanding the dependency system is to grasp the " +"concept of a simple dependency. The meaning of a simple dependency is that a " +"package requires another package to be installed at the same time to work " +"properly." +msgstr "" +"Il primo passo per capire il sistema di dipendenze è la comprensione del " +"concetto di dipendenza semplice: un pacchetto richiede che un altro sia " +"installato insieme ad esso per poter funzionare." + +#. type:

+#: guide.sgml:63 +#, fuzzy +msgid "" +"For instance, mailcrypt is an emacs extension that aids in encrypting email " +"with GPG. Without GPGP installed mail-crypt is useless, so mailcrypt has a " +"simple dependency on GPG. Also, because it is an emacs extension it has a " +"simple dependency on emacs, without emacs it is completely useless." +msgstr "" +"Ad esempio, mail-crypt è un'estensione di emacs che aiuta a criptare le mail " +"con PGP. Se PGP non è installato, mail-crypt è inutile, quindi mail-crypt ha " +"una dipendenza semplice da PGP. Inoltre, dato che si tratta di un'estensione " +"di emacs, mail-crypt dipende anche da emacs, senza il quale è totalmente " +"inutile." + +#. type:

+#: guide.sgml:73 +#, fuzzy +msgid "" +"The other important dependency to understand is a conflicting dependency. It " +"means that a package, when installed with another package, will not work and " +"may possibly be extremely harmful to the system. As an example consider a " +"mail transport agent such as sendmail, exim or qmail. It is not possible to " +"have two mail transport agents installed because both need to listen to the " +"network to receive mail. Attempting to install two will seriously damage the " +"system so all mail transport agents have a conflicting dependency with all " +"other mail transport agents." +msgstr "" +"L'altro tipo di dipendenza importante da capire è la dipendenza di " +"conflitto; con questa, un pacchetto che venga installato insieme ad un altro " +"pacchetto non funziona, e si hanno seri problemi al sistema. Come esempio, " +"si consideri un programma di trasporto della posta, quale sendmail, exim o " +"qmail: non è possibile averne due contemporaneamente, perché entrambi hanno " +"bisogno di restare in ascolto sulla stessa porta di rete per ricevere la " +"posta. Tentare di installarne due danneggerebbe seriamente il sistema, " +"quindi ciascun programma di trasporto della posta ha una dipendenza di " +"conflitto con tutti gli altri." + +#. type:

+#: guide.sgml:83 +#, fuzzy +msgid "" +"As an added complication there is the possibility for a package to pretend " +"to be another package. Consider that exim and sendmail for many intents are " +"identical, they both deliver mail and understand a common interface. Hence, " +"the package system has a way for them to declare that they are both mail-" +"transport-agents. So, exim and sendmail both declare that they provide a " +"mail-transport-agent and other packages that need a mail transport agent " +"depend on mail-transport-agent. This can add a great deal of confusion when " +"trying to manually fix packages." +msgstr "" +"Come ulteriore complicazione, c'è la possibilità che un pacchetto voglia " +"prendere il posto di un altro; ad esempio, exim e sendmail per molte cose " +"sono identici, dato che entrambi gestiscono la posta e comprendono " +"un'interfaccia comune, quindi il sistema di pacchettizzazione deve " +"dichiarare che sono entrambi agenti di trasporto della posta, e che gli " +"altri pacchetti a cui serve uno dei due devono dipendere da un pacchetto " +"fittizio agente-di-trasporto-della-posta. Quando si modificano a mano i " +"pacchetti, questo può portare a moltissima confusione." + +#. type:

+#: guide.sgml:88 +#, fuzzy +msgid "" +"At any given time a single dependency may be met by packages that are " +"already installed or it may not be. APT attempts to help resolve dependency " +"issues by providing a number of automatic algorithms that help in selecting " +"packages for installation." +msgstr "" +"In ciascun momento una singola dipendenza può essere soddisfatta o meno dai " +"pacchetti già installati; APT cerca di risolvere i problemi di dipendenze " +"con un buon numero di algoritmi automatici, che aiutano a selezionare i " +"pacchetti da installare." + +#. type:

+#: guide.sgml:102 +#, fuzzy +msgid "" +"apt-get provides a simple way to install packages from the " +"command line. Unlike dpkg, apt-get does not " +"understand .deb files, it works with the package's proper name and can only " +"install .deb archives from a Source." +msgstr "" +"apt-get fornisce un modo semplice di installare i pacchetti " +"dalla linea di comando. Diversamente da dpkg, apt-get non capisce i nomi dei file .deb, ma utilizza il vero nome dei " +"pacchetti, e può installare archivi .deb solo da una fonte." + +#. type:

+#: guide.sgml:109 +#, fuzzy +msgid "" +"The first

If you are using an http proxy server you must set " +"the http_proxy environment variable first, see sources.list(5)

thing that should be done before using apt-get is to " +"fetch the package lists from the Sources so that it knows what " +"packages are available. This is done with apt-get update. For " +"instance," +msgstr "" +"La prima

Se state usando un proxy server http, dovete prima " +"ancora impostare la variabile d'ambiente http_proxy; vedere sources.list(5)." +"

 cosa da fare prima di usare apt-get è impostare " +"l'elenco dei pacchetti dalle fonti in modo che il programma sappia quali " +"pacchetti sono disponibili. Lo si fa con apt-get update. Ad esempio," + +#. type: +#: guide.sgml:116 +#, fuzzy, no-wrap +msgid "" +"# apt-get update\n" +"Get http://ftp.de.debian.org/debian-non-US/ stable/binary-i386/ Packages\n" +"Get http://llug.sep.bnl.gov/debian/ testing/contrib Packages\n" +"Reading Package Lists... Done\n" +"Building Dependency Tree... Done" +msgstr "" +"# apt-get update\n" +"Get http://ftp.de.debian.org/debian-non-US/ stable/binary-i386/ Packages\n" +"Get http://llug.sep.bnl.gov/debian/ testing/contrib Packages\n" +"Reading Package Lists... Done\n" +"Building Dependency Tree... Done" + +#. type:

+#: guide.sgml:120 +#, fuzzy +msgid "Once updated there are several commands that can be used:" +msgstr "Dopo aver aggiornato l'elenco si possono usare molti comandi:" + +#. type:

+#: guide.sgml:131 +#, fuzzy +msgid "" +"Upgrade will attempt to gently upgrade the whole system. Upgrade will never " +"install a new package or remove an existing package, nor will it ever " +"upgrade a package that might cause some other package to break. This can be " +"used daily to relatively safely upgrade the system. Upgrade will list all of " +"the packages that it could not upgrade, this usually means that they depend " +"on new packages or conflict with some other package. dselect or " +"apt-get install can be used to force these packages to install." +msgstr "" +"Upgrade tenterà di fare un aggiornamento indolore del sistema completo, " +"senza installare nuovi pacchetti o rimuoverne di esistenti, e senza " +"aggiornare un pacchetto che possa rovinarne altri. Upgrade farà un elenco di " +"tutti i pacchetti che non avrà potuto aggiornare, cosa che in genere " +"significa che questi dipendono da nuovi pacchetti o vanno in conflitto con " +"altri. Per forzare la loro installazione si può usare dselect o " +"apt-get install." + +#. type:

+#: guide.sgml:140 +#, fuzzy +msgid "" +"Install is used to install packages by name. The package is automatically " +"fetched and installed. This can be useful if you already know the name of " +"the package to install and do not want to go into a GUI to select it. Any " +"number of packages may be passed to install, they will all be fetched. " +"Install automatically attempts to resolve dependency problems with the " +"listed packages and will print a summary and ask for confirmation if " +"anything other than its arguments are changed." +msgstr "" +"Install viene usato per installare i singoli pacchetti dando il loro nome. " +"Il pacchetto viene automaticamente scaricato ed installato, cosa molto utile " +"se già se ne conosce il nome e non si vuole entrare in grafica per " +"selezionarlo. Al comando si possono passare anche più pacchetti, che saranno " +"tutti scaricati. L'installazione automatica cerca di risolvere i problemi di " +"dipendenze con gli altri pacchetti elencati, stampa un riassunto e chiede " +"conferma se si devono modificare altri pacchetti che non siano quelli sulla " +"linea di comando." + +#. type:

+#: guide.sgml:149 +#, fuzzy +msgid "" +"Dist-upgrade is a complete upgrader designed to simplify upgrading between " +"releases of Debian. It uses a sophisticated algorithm to determine the best " +"set of packages to install, upgrade and remove to get as much of the system " +"to the newest release. In some situations it may be desired to use dist-" +"upgrade rather than spend the time manually resolving dependencies in " +"dselect. Once dist-upgrade has completed then dselect can be used to install any packages that may have been left out." +msgstr "" +"Dist-upgrade fa un aggiornamento completo, progettato in modo da rendere " +"semplici gli aggiornamenti tra versioni di Debian. Usa un algoritmo " +"sofisticato per determinare il miglior insieme di pacchetti da installare, " +"aggiornare e rimuovere per arrivare alla versione più aggiornata del sistema " +"possibile. In alcune situazioni può essere vantaggioso usare dist-upgrade " +"invece che sprecare tempo a risolvere manualmente le dipendenze con " +"dselect. Una volta completato dist-upgrade, si può usare " +"dselect per installare eventuali pacchetti che sono stati " +"tralasciati." + +#. type:

+#: guide.sgml:152 +#, fuzzy +msgid "" +"It is important to closely look at what dist-upgrade is going to do, its " +"decisions may sometimes be quite surprising." +msgstr "" +"È importante controllare attentamente cosa intende fare dist-upgrade, dato " +"che le sue decisioni a volte possono essere abbastanza sorprendenti." + +#. type:

+#: guide.sgml:163 +#, fuzzy +msgid "" +"apt-get has several command line options that are detailed in " +"its man page, . The most useful " +"option is -d which does not install the fetched files. If the " +"system has to download a large number of package it would be undesired to " +"start installing them in case something goes wrong. When -d is used " +"the downloaded archives can be installed by simply running the command that " +"caused them to be downloaded again without -d." +msgstr "" +"apt-get ha diverse opzioni a linea di comando, che vengono " +"documentate dettagliatamente nella sua pagina man, . L'opzione più utile è -d, che non installa i " +"file scaricati: se il sistema deve scaricare un gran numero di pacchetti, " +"non è bene farglieli installare subito, in caso dovesse andare male " +"qualcosa. Dopo aver usato -d, gli archivi scaricati possono essere " +"installati semplicemente dando di nuovo lo stesso comando senza l'opzione " +"-d." + +#. type: +#: guide.sgml:168 +#, fuzzy +msgid "DSelect" +msgstr "DSelect" + +#. type:

+#: guide.sgml:173 +#, fuzzy +msgid "" +"The APT dselect method provides the complete APT system with " +"the dselect package selection GUI. dselect is used " +"to select the packages to be installed or removed and APT actually installs " +"them." +msgstr "" +"Il metodo APT di dselect fornisce tutte le funzionalità di APT " +"all'interno dell'interfaccia grafica di selezione dei pacchetti " +"dselect. dselect viene usato per selezionare i " +"pacchetti da installare o rimuovere, ed APT li installa." + +#. type:

+#: guide.sgml:184 +#, fuzzy +msgid "" +"To enable the APT method you need to to select [A]ccess in dselect and then choose the APT method. You will be prompted for a set of " +"Sources which are places to fetch archives from. These can be " +"remote Internet sites, local Debian mirrors or CDROMs. Each source can " +"provide a fragment of the total Debian archive, APT will automatically " +"combine them to form a complete set of packages. If you have a CDROM then it " +"is a good idea to specify it first and then specify a mirror so that you " +"have access to the latest bug fixes. APT will automatically use packages on " +"your CDROM before downloading from the Internet." +msgstr "" +"Per abilitare il metodo APT dovete selezionare [A]ccess in dselect e scegliere il metodo APT; vi verrà chiesto un insieme di fonti " +"(Sources), cioè di posti da cui scaricare gli archivi. Tali fonti " +"possono essere siti Internet remoti, mirror locali di Debian o CDROM; " +"ciascuna di esse può fornire una parte dell'archivio Debian, ed APT le " +"combinerà insieme in un set completo di pacchetti. Se avete un CDROM è una " +"buona idea indicare quello per primo, e poi i mirror, in modo da avere " +"accesso alle ultime versioni; APT userà in questo modo automaticamente i " +"pacchetti sul CDROM prima di scaricarli da Internet." + +#. type: +#: guide.sgml:198 +#, fuzzy, no-wrap +msgid "" +" Set up a list of distribution source locations\n" +"\t \n" +" Please give the base URL of the debian distribution.\n" +" The access schemes I know about are: http file\n" +"\t \n" +" For example:\n" +" file:/mnt/debian,\n" +" ftp://ftp.debian.org/debian,\n" +" http://ftp.de.debian.org/debian,\n" +" \n" +" \n" +" URL [http://llug.sep.bnl.gov/debian]:" +msgstr "" +" Set up a list of distribution source locations\n" +"\t \n" +" Please give the base URL of the debian distribution.\n" +" The access schemes I know about are: http file\n" +"\t \n" +" For example:\n" +" file:/mnt/debian,\n" +" ftp://ftp.debian.org/debian,\n" +" http://ftp.de.debian.org/debian,\n" +" \n" +" \n" +" URL [http://llug.sep.bnl.gov/debian]:" + +#. type:

+#: guide.sgml:205 +#, fuzzy +msgid "" +"The Sources setup starts by asking for the base of the Debian " +"archive, defaulting to a HTTP mirror. Next it asks for the distribution to " +"get." +msgstr "" +"La configurazione delle fonti inizia chiedendo la base dell'archivio Debian, " +"propone come default un mirror HTTP, e poi chiede la distribuzione da " +"scaricare." + +#. type: +#: guide.sgml:212 +#, fuzzy, no-wrap +msgid "" +" Please give the distribution tag to get or a path to the\n" +" package file ending in a /. The distribution\n" +" tags are typically something like: stable unstable testing non-US\n" +" \n" +" Distribution [stable]:" +msgstr "" +" Please give the distribution tag to get or a path to the\n" +" package file ending in a /. The distribution\n" +" tags are typically something like: stable unstable testing non-US\n" +" \n" +" Distribution [stable]:" + +#. type:

+#: guide.sgml:222 +#, fuzzy +msgid "" +"The distribution refers to the Debian version in the archive, stable refers to the latest released version and unstable refers to " +"the developmental version. non-US is only available on some mirrors " +"and refers to packages that contain encryption technology or other things " +"that cannot be exported from the United States. Importing these packages " +"into the US is legal however." +msgstr "" +"La distribuzione (``distribution'') fa riferimento alla versione Debian " +"dell'archivio: stable è l'ultima rilasciata, ed unstable è " +"quella di sviluppo. non-US è disponibile solo su alcuni mirror, e " +"contiene dei pacchetti in cui viene usata della tecnologia di criptazione o " +"altre cose che non possano essere esportate dagli Stati Uniti; importare " +"questi pacchetti negli US è però legale." + +#. type: +#: guide.sgml:228 +#, fuzzy, no-wrap +msgid "" +" Please give the components to get\n" +" The components are typically something like: main contrib non-free\n" +" \n" +" Components [main contrib non-free]:" +msgstr "" +" Please give the components to get\n" +" The components are typically something like: main contrib non-free\n" +" \n" +" Components [main contrib non-free]:" + +#. type:

+#: guide.sgml:236 +#, fuzzy +msgid "" +"The components list refers to the list of sub distributions to fetch. The " +"distribution is split up based on software licenses, main being DFSG free " +"packages while contrib and non-free contain things that have various " +"restrictions placed on their use and distribution." +msgstr "" +"L'elenco dei componenti (``components'') si riferisce alla lista di sotto-" +"distribuzioni da scaricare. Ciascuna distribuzione viene divisa in base al " +"copyright del software: la main contiene pacchetti la cui licenza soddisfa " +"le DFSG, mentre contrib e non-free contengono software che ha diverse " +"restrizioni sull'uso e sulla distribuzione." + +#. type:

+#: guide.sgml:240 +#, fuzzy +msgid "" +"Any number of sources can be added, the setup script will continue to prompt " +"until you have specified all that you want." +msgstr "" +"Si possono inserire un qualsiasi numero di fonti, e lo script di " +"configurazione continuerà a chiedere fino a che abbiate specificato tutti " +"gli elementi che volete." + +#. type:

+#: guide.sgml:247 +#, fuzzy +msgid "" +"Before starting to use dselect it is necessary to update the " +"available list by selecting [U]pdate from the menu. This is a super-set of " +"apt-get update that makes the fetched information available to " +"dselect. [U]pdate must be performed even if apt-get update has been run before." +msgstr "" +"Prima di cominciare ad usare dselect è necessario aggiornare " +"l'elenco dei pacchetti disponibili selezionando [U]pdate dal menù: si tratta " +"di un sovrainsieme di ciò che fa apt-get update, che rende " +"l'informazione scaricata disponibile a dselect. [U]pdate deve " +"essere fatto anche se prima è stato dato apt-get update." + +#. type:

+#: guide.sgml:253 +#, fuzzy +msgid "" +"You can then go on and make your selections using [S]elect and then perform " +"the installation using [I]nstall. When using the APT method the [C]onfig and " +"[R]emove commands have no meaning, the [I]nstall command performs both of " +"them together." +msgstr "" +"Si può a questo punto continuare selezionando i pacchetti desiderati usando " +"[S]elect e poi installando con [I]nstall. Se si usa il metodo APT, i comandi " +"[C]onfig e [R]emove non hanno significato, dato che entrambe le fasi sono " +"contenute in [I]nstall." + +#. type:

+#: guide.sgml:258 +#, fuzzy +msgid "" +"By default APT will automatically remove the package (.deb) files once they " +"have been successfully installed. To change this behavior place Dselect::" +"clean \"prompt\"; in /etc/apt/apt.conf." +msgstr "" +"Per default APT rimuoverà automaticamente i pacchetti che sono stati " +"installati con successo. Per modificare questo comportamento, si inserisca " +"Dselect::clean \"prompt\"; in /etc/apt/apt.conf." + +#. type: +#: guide.sgml:264 +#, fuzzy +msgid "The Interface" +msgstr "L'interfaccia" + +#. type:

+#: guide.sgml:278 +#, fuzzy +msgid "" +"Both that APT dselect method and apt-get share the " +"same interface. It is a simple system that generally tells you what it will " +"do and then goes and does it.

The dselect method " +"actually is a set of wrapper scripts to apt-get. The method " +"actually provides more functionality than is present in apt-get " +"alone.

 After printing out a summary of what will happen APT " +"then will print out some informative status messages so that you can " +"estimate how far along it is and how much is left to do." +msgstr "" +"Entrambi i metodi, dselect APT ed apt-get, " +"condividono la stessa interfaccia; si tratta di un sistema semplice che " +"indica in genere cosa sta per fare, e poi lo fa.

Il metodo " +"dselect è in realtà un insieme di script di wrapper ad " +"apt-get. Il metodo fornisce delle funzionalità maggiori del " +"solo apt-get.

 Dopo la stampa di un riassunto " +"delle operazioni che saranno fatte, APT stampa dei messaggi informativi " +"sullo stato del sistema, in modo che possiate avere davanti agli occhi a " +"quale punto dell'operazione si trova, e quanto ancora si deve aspettare." + +#. type: +#: guide.sgml:280 +#, fuzzy +msgid "Startup" +msgstr "Avvio" + +#. type:

+#: guide.sgml:284 +#, fuzzy +msgid "" +"Before all operations except update, APT performs a number of actions to " +"prepare its internal state. It also does some checks of the system's state. " +"At any time these operations can be performed by running apt-get check." +msgstr "" +"Prima di ciascuna operazione, eccetto l'aggiornamento della lista, APT " +"compie alcune operazioni per prepararsi, oltre a dei controlli dello stato " +"del sistema. In qualsiasi momento le stesse operazioni possono essere fatte " +"con apt-get check" + +#. type: +#: guide.sgml:289 +#, fuzzy, no-wrap +msgid "" +"# apt-get check\n" +"Reading Package Lists... Done\n" +"Building Dependency Tree... Done" +msgstr "" +"# apt-get check\n" +"Reading Package Lists... Done\n" +"Building Dependancy Tree... Done" + +#. type:

+#: guide.sgml:297 +#, fuzzy +msgid "" +"The first thing it does is read all the package files into memory. APT uses " +"a caching scheme so this operation will be faster the second time it is run. " +"If some of the package files are not found then they will be ignored and a " +"warning will be printed when apt-get exits." +msgstr "" +"La prima cosa che fa è leggere tutti i file dei pacchetti in memoria, usando " +"uno schema di caching in modo da rendere la stessa operazione più veloce la " +"seconda volta che la si fa. Se alcuni dei file dei pacchetti non vengono " +"trovati, sono ignorati e viene stampato un avvertimento all'uscita di apt-" +"get." + +#. type:

+#: guide.sgml:303 +#, fuzzy +msgid "" +"The final operation performs a detailed analysis of the system's " +"dependencies. It checks every dependency of every installed or unpacked " +"package and considers if it is OK. Should this find a problem then a report " +"will be printed out and apt-get will refuse to run." +msgstr "" +"L'operazione finale consiste in un'analisi dettagliata delle dipendenze del " +"sistema: viene controllato che tutte le dipendenze dei singoli pacchetti " +"installati o non scompattati siano soddisfatte. Se vengono individuati dei " +"problemi, viene stampato un resoconto, ed apt-get esce senza " +"eseguire alcuna operazione." + +#. type: +#: guide.sgml:320 +#, fuzzy, no-wrap +msgid "" +"# apt-get check\n" +"Reading Package Lists... Done\n" +"Building Dependency Tree... Done\n" +"You might want to run apt-get -f install' to correct these.\n" +"Sorry, but the following packages have unmet dependencies:\n" +" 9fonts: Depends: xlib6g but it is not installed\n" +" uucp: Depends: mailx but it is not installed\n" +" blast: Depends: xlib6g (>= 3.3-5) but it is not installed\n" +" adduser: Depends: perl-base but it is not installed\n" +" aumix: Depends: libgpmg1 but it is not installed\n" +" debiandoc-sgml: Depends: sgml-base but it is not installed\n" +" bash-builtins: Depends: bash (>= 2.01) but 2.0-3 is installed\n" +" cthugha: Depends: svgalibg1 but it is not installed\n" +" Depends: xlib6g (>= 3.3-5) but it is not installed\n" +" libreadlineg2: Conflicts:libreadline2 (<< 2.1-2.1)" +msgstr "" +"# apt-get check\n" +"Reading Package Lists... Done\n" +"Building Dependancy Tree... Done\n" +"You might want to run apt-get -f install' to correct these.\n" +"Sorry, but the following packages have unmet dependencies:\n" +" 9fonts: Depends: xlib6g but it is not installed\n" +" uucp: Depends: mailx but it is not installed\n" +" blast: Depends: xlib6g (>= 3.3-5) but it is not installed\n" +" adduser: Depends: perl-base but it is not installed\n" +" aumix: Depends: libgpmg1 but it is not installed\n" +" debiandoc-sgml: Depends: sgml-base but it is not installed\n" +" bash-builtins: Depends: bash (>= 2.01) but 2.0-3 is installed\n" +" cthugha: Depends: svgalibg1 but it is not installed\n" +" Depends: xlib6g (>= 3.3-5) but it is not installed\n" +" libreadlineg2: Conflicts:libreadline2 (<< 2.1-2.1)" + +#. type:

+#: guide.sgml:329 +#, fuzzy +msgid "" +"In this example the system has many problems, including a serious problem " +"with libreadlineg2. For each package that has unmet dependencies a line is " +"printed out indicating the package with the problem and the dependencies " +"that are unmet. A short explanation of why the package has a dependency " +"problem is also included." +msgstr "" +"In questo esempio il sistema ha molti problemi, tra cui uno piuttosto serio " +"con la libreadlineg2. Per ciascun pacchetto che ha dipendenze non " +"soddisfatte, viene stampata una linea che indica il pacchetto che crea il " +"problema e quali problemi ci sono. Viene inclusa inoltre una breve " +"spiegazione del perché il pacchetto ha un problema di dipendenze." + +#. type:

+#: guide.sgml:337 +#, fuzzy +msgid "" +"There are two ways a system can get into a broken state like this. The first " +"is caused by dpkg missing some subtle relationships between " +"packages when performing upgrades.

APT however considers all " +"known dependencies and attempts to prevent broken packages

. " +"The second is if a package installation fails during an operation. In this " +"situation a package may have been unpacked without its dependents being " +"installed." +msgstr "" +"Ci sono due modi in cui un sistema possa arrivare in uno stato problematico " +"di questo genere: il primo è causato dal fatto che dpkg possa " +"mancare alcune relazioni sottili tra pacchetti durante un aggiornamento del " +"sistema

APT considera comunque tutte le dipendenze note, e cerca " +"di prevenire problemi ai pacchetti

; il secondo è possibile se " +"l'installazione di un pacchetto fallisce, ed in questo caso è possibile che " +"un pacchetto venga scompattato senza che tutti quelli da cui dipende siano " +"stati installati." + +#. type:

+#: guide.sgml:345 +#, fuzzy +msgid "" +"The second situation is much less serious than the first because APT places " +"certain constraints on the order that packages are installed. In both cases " +"supplying the -f option to apt-get will cause APT to " +"deduce a possible solution to the problem and then continue on. The APT " +"dselect method always supplies the -f option to allow " +"for easy continuation of failed maintainer scripts." +msgstr "" +"La seconda possibilità è meno seria della prima, dato che APT gestisce " +"l'ordine di installazione dei pacchetti; in entrambi i casi l'opzione -" +"f di apt-get gli farà trovare una soluzione e lo farà " +"continuare. Il metodo APT di dselect comprende sempre l'opzione " +"-f per permettere di configurare facilmente anche i pacchetti con " +"script errati." + +#. type:

+#: guide.sgml:351 +#, fuzzy +msgid "" +"However, if the -f option is used to correct a seriously broken " +"system caused by the first case then it is possible that it will either fail " +"immediately or the installation sequence will fail. In either case it is " +"necessary to manually use dpkg (possibly with forcing options) to correct " +"the situation enough to allow APT to proceed." +msgstr "" +"Se viene usata però l'opzione -f per correggere un sistema in uno " +"stato molto problematico, è possibile che anche con l'opzione il programma " +"fallisca, subito o durante la sequenza di installazione. In entrambi i casi " +"è necessario usare dpkg a mano (probabilmente usando delle opzioni di " +"forzatura) per correggere quanto basta per poter fare continuare APT." + +#. type: +#: guide.sgml:356 +#, fuzzy +msgid "The Status Report" +msgstr "Il resoconto sullo stato" + +#. type:

+#: guide.sgml:363 +#, fuzzy +msgid "" +"Before proceeding apt-get will present a report on what will " +"happen. Generally the report reflects the type of operation being performed " +"but there are several common elements. In all cases the lists reflect the " +"final state of things, taking into account the -f option and any " +"other relevant activities to the command being executed." +msgstr "" +"Prima di procedere, apt-get presenterà un resoconto delle " +"operazioni che sta per fare. In genere tale resoconto varierà con il tipo di " +"operazioni da fare, ma ci sono alcuni elementi comuni: in tutti i casi gli " +"elenchi dipendono dallo stato finale delle cose, e tengono conto " +"dell'opzione -f e di altre attività rilevanti per il comando da " +"eseguire." + +#. type: +#: guide.sgml:364 +#, fuzzy +msgid "The Extra Package list" +msgstr "L'elenco dei pacchetti Extra" + +#. type: +#: guide.sgml:372 +#, fuzzy, no-wrap +msgid "" +"The following extra packages will be installed:\n" +" libdbd-mysql-perl xlib6 zlib1 xzx libreadline2 libdbd-msql-perl\n" +" mailpgp xdpkg fileutils pinepgp zlib1g xlib6g perl-base\n" +" bin86 libgdbm1 libgdbmg1 quake-lib gmp2 bcc xbuffy\n" +" squake pgp-i python-base debmake ldso perl libreadlineg2\n" +" ssh" +msgstr "" +"The following extra packages will be installed:\n" +" libdbd-mysql-perl xlib6 zlib1 xzx libreadline2 libdbd-msql-perl\n" +" mailpgp xdpkg fileutils pinepgp zlib1g xlib6g perl-base\n" +" bin86 libgdbm1 libgdbmg1 quake-lib gmp2 bcc xbuffy\n" +" squake pgp-i python-base debmake ldso perl libreadlineg2\n" +" ssh" + +#. type:

+#: guide.sgml:379 +#, fuzzy +msgid "" +"The Extra Package list shows all of the packages that will be installed or " +"upgraded in excess of the ones mentioned on the command line. It is only " +"generated for an install command. The listed packages are often the " +"result of an Auto Install." +msgstr "" +"L'elenco dei pacchetti Extra mostra tutti i pacchetti che verranno " +"installati o aggiornati oltre a quelli indicati sulla linea di comando. " +"Viene generato solo per il comando install. I pacchetti elencati " +"sono spesso il risultato di un'operazione di auto installazione (Auto " +"Install)." + +#. type: +#: guide.sgml:382 +#, fuzzy +msgid "The Packages to Remove" +msgstr "I pacchetti da rimuovere" + +#. type: +#: guide.sgml:389 +#, fuzzy, no-wrap +msgid "" +"The following packages will be REMOVED:\n" +" xlib6-dev xpat2 tk40-dev xkeycaps xbattle xonix\n" +" xdaliclock tk40 tk41 xforms0.86 ghostview xloadimage xcolorsel\n" +" xadmin xboard perl-debug tkined xtetris libreadline2-dev perl-suid\n" +" nas xpilot xfig" +msgstr "" +"The following packages will be REMOVED:\n" +" xlib6-dev xpat2 tk40-dev xkeycaps xbattle xonix\n" +" xdaliclock tk40 tk41 xforms0.86 ghostview xloadimage xcolorsel\n" +" xadmin xboard perl-debug tkined xtetris libreadline2-dev perl-suid\n" +" nas xpilot xfig" + +#. type:

+#: guide.sgml:399 +#, fuzzy +msgid "" +"The Packages to Remove list shows all of the packages that will be removed " +"from the system. It can be shown for any of the operations and should be " +"given a careful inspection to ensure nothing important is to be taken off. " +"The -f option is especially good at generating packages to remove " +"so extreme care should be used in that case. The list may contain packages " +"that are going to be removed because they are only partially installed, " +"possibly due to an aborted installation." +msgstr "" +"L'elenco dei pacchetti da rimuovere (Remove) indica tutti i pacchetti che " +"verranno rimossi dal sistema. Può essere mostrato per una qualsiasi delle " +"operazioni, e deve sempre essere esaminato attentamente per assicurarsi che " +"non venga eliminato qualcosa di importante. Con l'opzione -f è " +"particolarmente probabile che vengano eliminati dei pacchetti, ed in questo " +"caso va fatta estrema attenzione. La lista può contenere dei pacchetti che " +"verranno rimossi perché sono già rimossi parzialmente, forse a causa di " +"un'installazione non terminata correttamente." + +#. type: +#: guide.sgml:402 +#, fuzzy +msgid "The New Packages list" +msgstr "L'elenco dei nuovi pacchetti installati" + +#. type: +#: guide.sgml:406 +#, fuzzy, no-wrap +msgid "" +"The following NEW packages will installed:\n" +" zlib1g xlib6g perl-base libgdbmg1 quake-lib gmp2 pgp-i python-base" +msgstr "" +"The following NEW packages will installed:\n" +" zlib1g xlib6g perl-base libgdbmg1 quake-lib gmp2 pgp-i python-base" + +#. type:

+#: guide.sgml:411 +#, fuzzy +msgid "" +"The New Packages list is simply a reminder of what will happen. The packages " +"listed are not presently installed in the system but will be when APT is " +"done." +msgstr "" +"L'elenco dei nuovi pacchetti installati (New) è semplicemente un appunto su " +"quello che accadrà. I pacchetti nell'elenco non sono al momento installati " +"nel sistema, ma lo saranno alla fine delle operazioni di APT." + +#. type: +#: guide.sgml:414 +#, fuzzy +msgid "The Kept Back list" +msgstr "L'elenco dei pacchetti trattenuti" + +#. type: +#: guide.sgml:419 +#, fuzzy, no-wrap +msgid "" +"The following packages have been kept back\n" +" compface man-db tetex-base msql libpaper svgalib1\n" +" gs snmp arena lynx xpat2 groff xscreensaver" +msgstr "" +"The following packages have been kept back\n" +" compface man-db tetex-base msql libpaper svgalib1\n" +" gs snmp arena lynx xpat2 groff xscreensaver" + +#. type:

+#: guide.sgml:428 +#, fuzzy +msgid "" +"Whenever the whole system is being upgraded there is the possibility that " +"new versions of packages cannot be installed because they require new things " +"or conflict with already installed things. In this case the package will " +"appear in the Kept Back list. The best way to convince packages listed there " +"to install is with apt-get install or by using dselect " +"to resolve their problems." +msgstr "" +"In ogni caso in cui il sistema viene aggiornato nel suo insieme, c'è la " +"possibilità che non possano venire installate nuove versioni di alcuni " +"pacchetti, dato che potrebbero richiedere l'installazione di pacchetti non " +"presenti nel sistema, o entrare in conflitto con altri già presenti. In " +"questo caso, il pacchetto viene elencato nella lista di quelli trattenuti " +"(Kept Back). Il miglior modo per convincere i pacchetti elencati in questa " +"lista è di installarli con apt-get install o usare dselect per risolvere i problemi." + +#. type: +#: guide.sgml:431 +#, fuzzy +msgid "Held Packages warning" +msgstr "Messaggi di attenzione sui pacchetti trattenuti" + +#. type: +#: guide.sgml:435 +#, fuzzy, no-wrap +msgid "" +"The following held packages will be changed:\n" +" cvs" +msgstr "" +"The following held packages will be changed:\n" +" cvs" + +#. type:

+#: guide.sgml:441 +#, fuzzy +msgid "" +"Sometimes you can ask APT to install a package that is on hold, in such a " +"case it prints out a warning that the held package is going to be changed. " +"This should only happen during dist-upgrade or install." +msgstr "" +"A volte si può richiedere ad APT di installare un pacchetto che è stato " +"trattenuto; in questi casi viene stampato un messaggio di attenzione, che " +"avverte che il pacchetto verrà modificato. Questo dovrebbe accadere solo " +"durante operazioni di dist-upgrade o di install." + +#. type: +#: guide.sgml:444 +#, fuzzy +msgid "Final summary" +msgstr "Resoconto finale" + +#. type:

+#: guide.sgml:447 +#, fuzzy +msgid "" +"Finally, APT will print out a summary of all the changes that will occur." +msgstr "" +"Infine, APT stamperà un riassunto di tutte le modifiche che accadranno." + +#. type: +#: guide.sgml:452 +#, fuzzy, no-wrap +msgid "" +"206 packages upgraded, 8 newly installed, 23 to remove and 51 not upgraded.\n" +"12 packages not fully installed or removed.\n" +"Need to get 65.7M/66.7M of archives. After unpacking 26.5M will be used." +msgstr "" +"206 packages upgraded, 8 newly installed, 23 to remove and 51 not upgraded.\n" +"12 packages not fully installed or removed.\n" +"Need to get 65.7M/66.7M of archives. After unpacking 26.5M will be used." + +#. type:

+#: guide.sgml:470 +#, fuzzy +msgid "" +"The first line of the summary simply is a reduced version of all of the " +"lists and includes the number of upgrades - that is packages already " +"installed that have new versions available. The second line indicates the " +"number of poorly configured packages, possibly the result of an aborted " +"installation. The final line shows the space requirements that the " +"installation needs. The first pair of numbers refer to the size of the " +"archive files. The first number indicates the number of bytes that must be " +"fetched from remote locations and the second indicates the total size of all " +"the archives required. The next number indicates the size difference between " +"the presently installed packages and the newly installed packages. It is " +"roughly equivalent to the space required in /usr after everything is done. " +"If a large number of packages are being removed then the value may indicate " +"the amount of space that will be freed." +msgstr "" +"La prima linea del riassunto è semplicemente una versione ridotta di tutte " +"le liste, ed include il numero di aggiornamenti -- cioè dei pacchetti già " +"installati per cui sono disponibili nuove versioni. La seconda linea indica " +"il numero di pacchetti con problemi di configurazione, probabilmente in " +"conseguenza di un'installazione non andata a buon fine. La linea finale " +"indica i requisiti di spazio dell'installazione: i primi due numeri indicano " +"rispettivamente il numero di byte che devono essere trasferiti da posizioni " +"remote, ed il secondo la dimensione totale di tutti gli archivi necessari " +"per l'installazione. Il numero successivo indica la differenza in dimensione " +"tra i pacchetti già installati e quelli che lo saranno, ed è " +"approssimativamente equivalente allo spazio richiesto in /usr dopo " +"l'installazione. Se si stanno rimuovendo dei pacchetti, il valore può " +"indicare lo spazio che verrà liberato." + +#. type:

+#: guide.sgml:473 +#, fuzzy +msgid "" +"Some other reports can be generated by using the -u option to show packages " +"to upgrade, they are similar to the previous examples." +msgstr "" +"Si possono generare altri resoconti usando l'opzione -u per mostrare i " +"pacchetti da aggiornare, ma sono simili all'esempio precedente." + +#. type: +#: guide.sgml:477 +#, fuzzy +msgid "The Status Display" +msgstr "La visualizzazione dello stato" + +#. type:

+#: guide.sgml:481 +#, fuzzy +msgid "" +"During the download of archives and package files APT prints out a series of " +"status messages." +msgstr "" +"Durante il download degli archivi e dei file dei pacchetti, APT stampa una " +"serie di messaggi di stato." + +#. type: +#: guide.sgml:490 +#, fuzzy, no-wrap +msgid "" +"# apt-get update\n" +"Get:1 http://ftp.de.debian.org/debian-non-US/ stable/non-US/ Packages\n" +"Get:2 http://llug.sep.bnl.gov/debian/ testing/contrib Packages\n" +"Hit http://llug.sep.bnl.gov/debian/ testing/main Packages\n" +"Get:4 http://ftp.de.debian.org/debian-non-US/ unstable/binary-i386/ Packages\n" +"Get:5 http://llug.sep.bnl.gov/debian/ testing/non-free Packages\n" +"11% [5 testing/non-free `Waiting for file' 0/32.1k 0%] 2203b/s 1m52s" +msgstr "" +"# apt-get update\n" +"Get:1 http://ftp.de.debian.org/debian-non-US/ stable/non-US/ Packages\n" +"Get:2 http://llug.sep.bnl.gov/debian/ testing/contrib Packages\n" +"Hit http://llug.sep.bnl.gov/debian/ testing/main Packages\n" +"Get:4 http://ftp.de.debian.org/debian-non-US/ unstable/binary-i386/ Packages\n" +"Get:5 http://llug.sep.bnl.gov/debian/ testing/non-free Packages\n" +"11% [5 testing/non-free `Waiting for file' 0/32.1k 0%] 2203b/s 1m52s" + +#. type:

+#: guide.sgml:500 +#, fuzzy +msgid "" +"The lines starting with Get are printed out when APT begins to " +"fetch a file while the last line indicates the progress of the download. The " +"first percent value on the progress line indicates the total percent done of " +"all files. Unfortunately since the size of the Package files is unknown " +"apt-get update estimates the percent done which causes some " +"inaccuracies." +msgstr "" +"Le linee che cominciano con Get vengono stampate quando APT inizia " +"a scaricare un file, e l'ultima linea indica il progresso dell'operazione. " +"Il primo valore in percentuale indica la percentuale totale di tutti i file; " +"dato che la dimensione dei file Package non è nota, purtroppo a volte " +"apt-get update fa una stima poco accurata." + +#. type:

+#: guide.sgml:509 +#, fuzzy +msgid "" +"The next section of the status line is repeated once for each download " +"thread and indicates the operation being performed and some useful " +"information about what is happening. Sometimes this section will simply read " +"Forking which means the OS is loading the download module. The " +"first word after the [ is the fetch number as shown on the history lines. " +"The next word is the short form name of the object being downloaded. For " +"archives it will contain the name of the package that is being fetched." +msgstr "" +"La sezione successiva della linea di stato viene ripetuta una volta per " +"ciascuna fase del download, ed indica l'operazione in corso, insieme ad " +"alcune informazioni utili su cosa stia accadendo. A volte questa sezione " +"contiene solamente Forking, che significa che il sistema operativo " +"sta caricando il modulo. La prima parola dopo la parentesi quadra aperta è " +"il nome breve dell'oggetto che si sta scaricando, che per gli archivi è il " +"nome del pacchetto." + +#. type:

+#: guide.sgml:524 +#, fuzzy +msgid "" +"Inside of the single quote is an informative string indicating the progress " +"of the negotiation phase of the download. Typically it progresses from " +"Connecting to Waiting for file to Downloading or " +"Resuming. The final value is the number of bytes downloaded from " +"the remote site. Once the download begins this is represented as " +"102/10.2k indicating that 102 bytes have been fetched and 10.2 " +"kilobytes is expected. The total size is always shown in 4 figure notation " +"to preserve space. After the size display is a percent meter for the file " +"itself. The second last element is the instantaneous average speed. This " +"values is updated every 5 seconds and reflects the rate of data transfer for " +"that period. Finally is shown the estimated transfer time. This is updated " +"regularly and reflects the time to complete everything at the shown transfer " +"rate." +msgstr "" +"All'interno delle virgolette c'è una stringa informativa, che indica il " +"progresso della fase di negoziazione del download. Tipicamente comincia con " +"Connecting, procede con Waiting for file e poi con " +"Downloading o Resuming. Il valore finale è il numero di " +"byte che sono stati scaricati dal sito remoto: una volta cominciato il " +"download viene rappresentato come 102/10.2k, che indica che sono " +"stati scaricati 102 byte di 10.2 kilobyte. La dimensione totale viene sempre " +"espressa in notazione a quattro cifre, per risparmiare spazio. Dopo la " +"dimensione viene indicato un indicatore progressivo della percentuale del " +"file. Il penultimo elemento è la velocità istantanea media, che viene " +"aggiornata ogni 5 secondi, e riflette la velocità di trasferimento dei dati " +"in quel periodo. Infine, viene visualizzato il tempo stimato per il " +"trasferimento, che viene aggiornato periodicamente e riflette il tempo " +"necessario per completare tutte le operazioni alla velocità di trasferimento " +"mostrata." + +#. type:

+#: guide.sgml:530 +#, fuzzy +msgid "" +"The status display updates every half second to provide a constant feedback " +"on the download progress while the Get lines scroll back whenever a new file " +"is started. Since the status display is constantly updated it is unsuitable " +"for logging to a file, use the -q option to remove the status " +"display." +msgstr "" +"La visualizzazione dello stato viene aggiornata ogni mezzo secondo per " +"fornire un feedback costante del processo di download, e le linee Get " +"scorrono indietro quando viene cominciato il download di un nuovo file. Dato " +"che la visualizzazione dello stato viene costantemente aggiornata, non è " +"adatta per essere registrata in un file; per non visualizzarla si può usare " +"l'opzione -q." + +#. type: +#: guide.sgml:535 +#, fuzzy +msgid "Dpkg" +msgstr "Dpkg" + +#. type:

+#: guide.sgml:542 +#, fuzzy +msgid "" +"APT uses dpkg for installing the archives and will switch over " +"to the dpkg interface once downloading is completed. " +"dpkg will also ask a number of questions as it processes the " +"packages and the packages themselves may also ask several questions. Before " +"each question there is usually a description of what it is asking and the " +"questions are too varied to discuss completely here." +msgstr "" +"APT usa dpkg per installare gli archivi e passerà " +"all'interfaccia dpkg una volta finito il download. dpkg porrà anche alcune domande durante la manipolazione dei pacchetti, ed " +"i pacchetti stessi potranno farne altre. Prima di ciascuna domanda viene " +"proposta una descrizione di quello che sta per chiedere, e le domande sono " +"troppo diverse per poter essere discusse in maniera completa in questa " +"occasione." + +#. type: +#: offline.sgml:4 +msgid "Using APT Offline" +msgstr "" + +#. type: +#: offline.sgml:7 +#, fuzzy +msgid "$Id: offline.sgml,v 1.8 2003/02/12 15:06:41 doogie Exp $" +msgstr "$Id: guide.it.sgml,v 1.5 2003/04/26 23:26:13 doogie Exp $" + +#. type: +#: offline.sgml:12 +msgid "" +"This document describes how to use APT in a non-networked environment, " +"specifically a 'sneaker-net' approach for performing upgrades." +msgstr "" + +#. type: +#: offline.sgml:16 +#, fuzzy +msgid "Copyright © Jason Gunthorpe, 1999." +msgstr "Copyright © Jason Gunthorpe, 1998." + +#. type: +#: offline.sgml:32 +msgid "Introduction" +msgstr "" + +#. type: +#: offline.sgml:34 offline.sgml:65 offline.sgml:180 +msgid "Overview" +msgstr "" + +#. type:

+#: offline.sgml:40 +msgid "" +"Normally APT requires direct access to a Debian archive, either from a local " +"media or through a network. Another common complaint is that a Debian " +"machine is on a slow link, such as a modem and another machine has a very " +"fast connection but they are physically distant." +msgstr "" + +#. type:

+#: offline.sgml:51 +msgid "" +"The solution to this is to use large removable media such as a Zip disc or a " +"SuperDisk disc. These discs are not large enough to store the entire Debian " +"archive but can easily fit a subset large enough for most users. The idea is " +"to use APT to generate a list of packages that are required and then fetch " +"them onto the disc using another machine with good connectivity. It is even " +"possible to use another Debian machine with APT or to use a completely " +"different OS and a download tool like wget. Let remote host mean " +"the machine downloading the packages, and target host the one with " +"bad or no connection." +msgstr "" + +#. type:

+#: offline.sgml:57 +msgid "" +"This is achieved by creatively manipulating the APT configuration file. The " +"essential premis to tell APT to look on a disc for it's archive files. Note " +"that the disc should be formated with a filesystem that can handle long file " +"names such as ext2, fat32 or vfat." +msgstr "" + +#. type: +#: offline.sgml:63 +msgid "Using APT on both machines" +msgstr "" + +#. type:

+#: offline.sgml:71 +msgid "" +"APT being available on both machines gives the simplest configuration. The " +"basic idea is to place a copy of the status file on the disc and use the " +"remote machine to fetch the latest package files and decide which packages " +"to download. The disk directory structure should look like:" +msgstr "" + +#. type: +#: offline.sgml:80 +#, no-wrap +msgid "" +" /disc/\n" +" archives/\n" +" partial/\n" +" lists/\n" +" partial/\n" +" status\n" +" sources.list\n" +" apt.conf" +msgstr "" + +#. type: +#: offline.sgml:88 +msgid "The configuration file" +msgstr "" + +#. type:

+#: offline.sgml:96 +msgid "" +"The configuration file should tell APT to store its files on the disc and to " +"use the configuration files on the disc as well. The sources.list should " +"contain the proper sites that you wish to use from the remote machine, and " +"the status file should be a copy of /var/lib/dpkg/status from the " +"target host. Please note, if you are using a local archive you must " +"use copy URIs, the syntax is identical to file URIs." +msgstr "" + +#. type:

+#: offline.sgml:100 +msgid "" +"apt.conf must contain the necessary information to make APT use the " +"disc:" +msgstr "" + +#. type: +#: offline.sgml:124 +#, no-wrap +msgid "" +" APT\n" +" {\n" +" /* This is not necessary if the two machines are the same arch, it tells\n" +" the remote APT what architecture the target machine is */\n" +" Architecture \"i386\";\n" +" \n" +" Get::Download-Only \"true\";\n" +" };\n" +" \n" +" Dir\n" +" {\n" +" /* Use the disc for state information and redirect the status file from\n" +" the /var/lib/dpkg default */\n" +" State \"/disc/\";\n" +" State::status \"status\";\n" +"\n" +" // Binary caches will be stored locally\n" +" Cache::archives \"/disc/archives/\";\n" +" Cache \"/tmp/\";\n" +" \n" +" // Location of the source list.\n" +" Etc \"/disc/\";\n" +" };" +msgstr "" + +#. type:

+#: offline.sgml:129 +msgid "" +"More details can be seen by examining the apt.conf man page and the sample " +"configuration file in /usr/share/doc/apt/examples/apt.conf." +msgstr "" + +#. type:

+#: offline.sgml:136 +msgid "" +"On the target machine the first thing to do is mount the disc and copy /" +"var/lib/dpkg/status to it. You will also need to create the directories " +"outlined in the Overview, archives/partial/ and lists/partial/ Then take the disc to the remote machine and configure the sources.list. " +"On the remote machine execute the following:" +msgstr "" + +#. type: +#: offline.sgml:142 +#, no-wrap +msgid "" +" # export APT_CONFIG=\"/disc/apt.conf\"\n" +" # apt-get update\n" +" [ APT fetches the package files ]\n" +" # apt-get dist-upgrade\n" +" [ APT fetches all the packages needed to upgrade the target machine ]" +msgstr "" + +#. type:

+#: offline.sgml:149 +msgid "" +"The dist-upgrade command can be replaced with any-other standard APT " +"commands, particularly dselect-upgrade. You can even use an APT front end " +"such as dselect However this presents a problem in communicating " +"your selections back to the local computer." +msgstr "" + +#. type:

+#: offline.sgml:153 +msgid "" +"Now the disc contains all of the index files and archives needed to upgrade " +"the target machine. Take the disc back and run:" +msgstr "" + +#. type: +#: offline.sgml:159 +#, no-wrap +msgid "" +" # export APT_CONFIG=\"/disc/apt.conf\"\n" +" # apt-get check\n" +" [ APT generates a local copy of the cache files ]\n" +" # apt-get --no-d -o dir::state::status=/var/lib/dpkg/status dist-upgrade\n" +" [ Or any other APT command ]" +msgstr "" + +#. type:

+#: offline.sgml:165 +msgid "" +"It is necessary for proper function to re-specify the status file to be the " +"local one. This is very important!" +msgstr "" + +#. type:

+#: offline.sgml:172 +msgid "" +"If you are using dselect you can do the very risky operation of copying disc/" +"status to /var/lib/dpkg/status so that any selections you made on the remote " +"machine are updated. I highly recommend that people only make selections on " +"the local machine - but this may not always be possible. DO NOT copy the " +"status file if dpkg or APT have been run in the mean time!!" +msgstr "" + +#. type: +#: offline.sgml:178 +msgid "Using APT and wget" +msgstr "" + +#. type:

+#: offline.sgml:185 +msgid "" +"wget is a popular and portable download tool that can run on nearly " +"any machine. Unlike the method above this requires that the Debian machine " +"already has a list of available packages." +msgstr "" + +#. type:

+#: offline.sgml:190 +msgid "" +"The basic idea is to create a disc that has only the archive files " +"downloaded from the remote site. This is done by using the --print-uris " +"option to apt-get and then preparing a wget script to actually fetch the " +"packages." +msgstr "" + +#. type: +#: offline.sgml:196 +msgid "Operation" +msgstr "" + +#. type:

+#: offline.sgml:200 +msgid "" +"Unlike the previous technique no special configuration files are required. " +"We merely use the standard APT commands to generate the file list." +msgstr "" + +#. type: +#: offline.sgml:205 +#, no-wrap +msgid "" +" # apt-get dist-upgrade \n" +" [ Press no when prompted, make sure you are happy with the actions ]\n" +" # apt-get -qq --print-uris dist-upgrade > uris\n" +" # awk '{print \"wget -O \" $2 \" \" $1}' < uris > /disc/wget-script" +msgstr "" + +#. type:

+#: offline.sgml:210 +msgid "" +"Any command other than dist-upgrade could be used here, including dselect-" +"upgrade." +msgstr "" + +#. type:

+#: offline.sgml:216 +msgid "" +"The /disc/wget-script file will now contain a list of wget commands to " +"execute in order to fetch the necessary archives. This script should be run " +"with the current directory as the disc's mount point so as to save the " +"output on the disc." +msgstr "" + +#. type:

+#: offline.sgml:219 +msgid "The remote machine would do something like" +msgstr "" + +#. type: +#: offline.sgml:223 +#, no-wrap +msgid "" +" # cd /disc\n" +" # sh -x ./wget-script\n" +" [ wait.. ]" +msgstr "" + +#. type: +#: offline.sgml:228 +msgid "" +"Once the archives are downloaded and the disc returned to the Debian machine " +"installation can proceed using," +msgstr "" + +#. type: +#: offline.sgml:230 +#, no-wrap +msgid " # apt-get -o dir::cache::archives=\"/disc/\" dist-upgrade" +msgstr "" + +#. type:

+#: offline.sgml:234 +msgid "Which will use the already fetched archives on the disc." +msgstr "" -- cgit v1.2.3 From 14d8b1a64ed5d27555370303d9d492d590361e69 Mon Sep 17 00:00:00 2001 From: David Kalnischkies Date: Mon, 2 Nov 2009 09:25:07 +0100 Subject: convert es translation to be also a po4a translation --- doc/es/addendum/xml_es.add | 9 + doc/es/apt-cache.es.8.sgml | 454 -- doc/es/apt-cdrom.es.8.sgml | 167 - doc/es/apt-config.es.8.sgml | 123 - doc/es/apt-get.es.8.sgml | 558 -- doc/es/apt.conf.es.5.sgml | 447 -- doc/es/apt.ent.es | 155 - doc/es/apt.es.8 | 55 - doc/es/apt_preferences.es.5.sgml | 587 --- doc/es/sources.list.es.5.sgml | 225 - doc/es/vendors.list.es.5.sgml | 120 - doc/po/es.po | 10101 +++++++++++++++++++++++++++++++++++++ 12 files changed, 10110 insertions(+), 2891 deletions(-) create mode 100644 doc/es/addendum/xml_es.add delete mode 100644 doc/es/apt-cache.es.8.sgml delete mode 100644 doc/es/apt-cdrom.es.8.sgml delete mode 100644 doc/es/apt-config.es.8.sgml delete mode 100644 doc/es/apt-get.es.8.sgml delete mode 100644 doc/es/apt.conf.es.5.sgml delete mode 100644 doc/es/apt.ent.es delete mode 100644 doc/es/apt.es.8 delete mode 100644 doc/es/apt_preferences.es.5.sgml delete mode 100644 doc/es/sources.list.es.5.sgml delete mode 100644 doc/es/vendors.list.es.5.sgml create mode 100644 doc/po/es.po (limited to 'doc') diff --git a/doc/es/addendum/xml_es.add b/doc/es/addendum/xml_es.add new file mode 100644 index 000000000..dc2b06be0 --- /dev/null +++ b/doc/es/addendum/xml_es.add @@ -0,0 +1,9 @@ +PO4A-HEADER:mode=after;position=manbugs;beginboundary=^ + Translation + The spanish translation was written 2003 and 2004 by Ismael Fanlo (2003), Carlos Mestre (2003), + Rudy Godoy rudy@kernel-panik.org (2003), + Gustavo Saldumbide gsal@adinet.com.uy (2003), + Javier Fernández-Sanguino jfs@computer.org (2003) + and Rubén Porras Campo nahoo@inicia.es (2003, 2004) + under the aegis of the debian spanish-l10n-team debian-l10n-spanish@lists.debian.org. + diff --git a/doc/es/apt-cache.es.8.sgml b/doc/es/apt-cache.es.8.sgml deleted file mode 100644 index 3ed0d2726..000000000 --- a/doc/es/apt-cache.es.8.sgml +++ /dev/null @@ -1,454 +0,0 @@ - - -%aptent; - -]> - - - - - &apt-docinfo; - - - apt-cache - 8 - - - - - apt-cache - utilidad de manejo de paquetes APT -- manipulador de caché - - - - - - apt-cache - - - - - add fichero - gencaches - showpkg paquete - showsrc paquete - stats - dump - dumpavail - unmet - search expresión regular - show paquete - depends paquete - rdepends pkg - pkgnames prefijo - dotty paquete - policy paquetes - madison paquetes - - - - - Descripción</> - <para> - <command/apt-cache/ realiza una serie de operaciones sobre la caché de - paquetes de APT. <command/apt-cache/ no modifica el estado del sistema - pero proporciona operaciones de búsqueda en la información de los - paquetes, de las cuales se puede obtener información muy útil. - - <para> - A menos que se proporcionen las opciones <option/-h/, o <option/--help/, se - debe de proporcionar una de las siguientes órdenes: - - <VariableList> - <VarListEntry><Term>add <replaceable/fichero(s)/</Term> - <ListItem><Para> - <literal/add/ añade el nombre del paquete a los ficheros de - índices de la caché de paquetes. Sólo para depuración. - </VarListEntry> - - <VarListEntry><Term>gencaches</Term> - <ListItem><Para> - <literal/gencaches/ realiza la misma operación que - <command/apt-get check/. Construye las cachés de paquetes fuente y de - paquetes binarios, usando la lista de recursos en &sources-list; - junto con la información en <filename>/var/lib/dpkg/status</>. - </VarListEntry> - - <VarListEntry><Term>showpkg <replaceable/paquete(s)/</Term> - <ListItem><Para> - <literal/showpkg/ muestra información acerca de los paquetes - listados en la línea de órdenes. Los argumentos restantes se - consideran nombres de paquetes. Por cada paquete se mostrarán las - versiones disponibles y los paquetes que dependen de él (reverse - dependencies), así como los paquetes de que depende (forward dependencies), - (los cuales deben de ser instalados para instalar el paquete). - Por ejemplo, <command>apt-cache showpkg libreadline2</> mostrará algo - similar a lo siguiente: - -<informalexample><programlisting> -Package: libreadline2 -Versions: 2.1-12(/var/state/apt/lists/foo_Packages), -Reverse Depends: - libreadlineg2,libreadline2 - libreadline2-altdev,libreadline2 -Dependencies: -2.1-12 - libc5 (2 5.4.0-0) ncurses3.0 (0 (null)) -Provides: -2.1-12 - -Reverse Provides: -</programlisting></informalexample> - - <para> - Esta información nos indica que la versión 2.1-12 de libreadline2, - depende de libc5 y ncurses3.0, ambos programas deben instalarse para - que libreadline2 pueda funcionar. Además, libreadlineg2 y - libreadline2-altdev dependen de libreadline2. Es decir, si se instala - libreadline2, también se instalarán libc5 y ncurses3.0 (y ldso), pero - libreadlineg2 y libreadline2-altdev no tienen que instalarse. - Para una información más especifica acerca del significado de la salida - consulte el código fuente de apt. - </VarListEntry> - - <VarListEntry><Term>stats</Term> - <ListItem><Para> - <literal/stats/ muestra algunas estadísticas acerca de la caché. - No necesita ningún argumento adicional. Las estadísticas que - muestra son: - <itemizedlist> - <listitem><para> - <literal/Total package names/ es el número de paquetes encontrados - en la caché. - </listitem> - - <listitem><para> - <literal/Normal packages/ es el número de paquetes normales. Estos - paquetes tienen una correspondencia unívoca entre sus nombres y - los nombres que usan otros paquetes al listarlos en sus - dependencias. La mayoría de los paquetes pertenecen a este grupo. - </listitem> - - <listitem><para> - <literal/Pure virtual packages/ es el número de paquetes que - existen sólo como nombre de paquete virtual, esto es, paquetes - que sólo "proporcionan" el nombre del paquete virtual, y no hay - ningún paquete más que use realmente el nombre. Por ejemplo, - "mail-transport-agent" en un sistema Debian GNU/Linux es un - paquete virtual puro, varios paquetes proporcionan - "mail-transport-agent", pero no hay ningún paquete que se llame - "mail-transport-agent". - </listitem> - - <listitem><para> - <literal/Single virtual packages/ es el número de paquetes que - sólo tiene un paquete real que los proporcione. Por ejemplo, en - un sistema Debian GNU/Linux, "X11-text-viewer" es un paquete - virtual, pero sólo un paquete, xless, proporciona "X11-text-viewer". - </listitem> - - <listitem><para> - <literal/Mixed virtual packages/ es el número de paquetes que o - bien proporcionan un determinado paquete virtual o tienen el - mismo nombre como paquete virtual y como paquete real, en un - sistema Debian GNU/Linux, "debconf" es a la vez un paquete real, - y es proporcionado por el paquete debconf-tiny. - </listitem> - - <listitem><para> - <literal/Missing/ es el número de nombres de paquetes a los que se hace - referencia como dependencia pero que no son proporcionado por ningún - paquete. Estos paquetes probablemente signifiquen que no se tiene - acceso al total de la distribución, o bien que algún paquete (real o - virtual) ha sido eliminado de la distribución. Normalmente se hace - referencia a ellos desde los campos de conflictos de la descripción - de los paquetes. - </listitem> - - <listitem><para> - <literal/Total distinct versions/ es el número de versiones de paquetes - encontrados en la caché, por lo tanto el número es al menos igual al - número total de paquetes. Si más de una distribución ("estable" - e "inestable", por ejemplo), se encuentra en la caché al mismo - tiempo, este valor puede ser considerablemente mayor que el - número total de paquetes. - </listitem> - - <listitem><para> - <literal/Total dependencies/ es el número total de relaciones de - dependencia necesitadas por todos los paquetes de la caché. - </listitem> - </itemizedlist> - </VarListEntry> - - <VarListEntry><Term>showsrc <replaceable/paquete(s)/</Term> - <ListItem><Para> - <literal/showsrc/ muestra todos los campos de los paquetes fuente que - coinciden con los nombres de los paquetes suministrados. Se muestran - todas las versiones, así como los paquetes que son binarios. - </VarListEntry> - - <VarListEntry><Term>dump</Term> - <ListItem><Para> - <literal/dump/ muestra una pequeña lista de todos los paquetes en la - caché. Fundamentalmente para depuración. - </VarListEntry> - - <VarListEntry><Term>dumpavail</Term> - <ListItem><Para> - <literal/dumpavail/ envía a la salida estándar una lista de los paquetes - disponibles. Esta lista es apropiada para su uso con &dpkg; y es - usada por el método &dselect;. - </VarListEntry> - - <VarListEntry><Term>unmet</Term> - <ListItem><Para> - <literal/unmet/ muestra un resumen de todas las dependencias no - satisfechas en la caché de paquetes. - </VarListEntry> - - <VarListEntry><Term>show <replaceable/paquete(s)/</Term> - <ListItem><Para> - <literal/show/ realiza una función similar a <command>dpkg - --print-avail</>, muestra los datos de los paquetes listados. - </VarListEntry> - - <VarListEntry><Term>search <replaceable/regex [regex ...]/</Term> - <ListItem><Para> - <literal/search/ realiza una búsqueda de la expresión regular - dada en todo el texto de todos los paquetes disponibles. Busca la - expresión regular tanto en el nombre de los paquetes como en - su descripción y muestra el nombre del paquete y una pequeña - descripción de este. Si se proporciona el argumento <option/--full/ el - resultado es el igual al que produce <literal/show/ para cada paquete en - concreto, pero si se proporciona el argumento <option/--names-only/ - entonces sólo se busca en el nombre de los paquetes. - <para> - - Se pueden especificar argumentos separados para buscar una cadena de - caracteres que los contenga todos al mismo tiempo. - </VarListEntry> - - <VarListEntry><Term>depends <replaceable/paquete(s)/</Term> - <ListItem><Para> - <literal/depends/ muestra una lista de todas la dependencias de - un paquete y de todos los paquetes que la pueden satisfacer. - </VarListEntry> - - <VarListEntry><Term>rdepends <replaceable/paquetes(s)/</Term> - <ListItem><Para> - <literal/rdepends/ muestrade las dependencias inversas de un paquete. - </VarListEntry> - - <VarListEntry><Term>pkgnames <replaceable/[ prefijo ]/</Term> - <ListItem><Para> - Esta orden muestra el nombre de todos los paquetes instalados en - el sistema. El argumento opcional es un prefijo por el cual se - filtraría la lista de nombres. La salida es apropiada para uso - junto con la función de auto-completado mediante tabulador en un - intérprete de órdenes y se genera de forma extremadamente - rápida. Su mejor uso es con la opción <option/--generate/. - </VarListEntry> - - <VarListEntry><Term>dotty <replaceable/paquete(s)/</Term> - <ListItem><Para> - <literal/dotty/ toma una lista de paquetes de la línea de ordenes - y genera una salida apropiada para dotty, del paquete - <ulink url="http://www.research.att.com/sw/tools/graphviz/">GraphViz</>. - El resultado será una serie de nodos y uniones representando las - relaciones entre paquetes. Por omisión los paquetes dados - mostrarán todas sus dependencias, lo que puede producir una - salida muy grande. Esto puede ser deshabilitado activando la - opción <literal>APT::Cache::GivenOnly</>. - - <para> - Los nodos resultantes tendrán varias formas, los paquetes normales son - cajas, pure provides son triángulos, mixed provides son - diamantes, los paquetes no encontrados son hexágonos. Las cajas naranjas - significan recursion was stopped [leaf packages], líneas azules - son predependencias, líneas verdes son conflictos. - - <para> - Tenga cuidado, dotty no puede dibujar una gran cantidad de paquetes. - - <VarListEntry><Term>policy <replaceable/[ paquete(s) ]/</Term> - <ListItem><Para> - <literal/policy/ está pensada para ayudar a depurar - asuntos relacionado con el archivo de preferencias. Sin - argumentos mostrará la prioridad de cada fuente. De lo - contrario muestra una información detallada acerca de la - prioridad de selección de cada nombre de paquete. - </VarListEntry> - - <VarListEntry><Term>madison <replaceable/[ paquete(s) ]/</Term> - <ListItem><Para> - La orden <literal/madison/ de <literal/apt-cache/ intenta imitar el formato - de salida y parte de la funcionalidad de la herramienta para el manejo del - archivo de Debian, <literal/madison/. Muestra las versiones disponibles de - un determinado paquete en un formato tabular. A diferencia del - <literal/madison/ original, sólo puede mostrar información para la - arquitectura para la que APT obtuvo las listas de paquetes - (<literal/APT::Architecture/). - </VarListEntry> - </VariableList> - </RefSect1> - - <RefSect1><Title>Opciones</> - &apt-cmdblurb; - - <VariableList> - <VarListEntry><term><option/-p/</><term><option/--pkg-cache/</> - <ListItem><Para> - Selecciona el fichero para guardar la caché de paquetes. La caché de - paquetes es la caché primaria usada para todas las operaciones. - Opción de configuración: <literal/Dir::Cache::pkgcache/. - </VarListEntry> - - <VarListEntry><term><option/-s/</><term><option/--src-cache/</> - <ListItem><Para> - Selecciona el fichero para guardar la caché de fuente. Sólo - <literal/gencaches/ usa esta caché y guarda una versión meticulosamente - analizada de la información de cada paquete de las fuentes - remotas. Cuando se construye la caché de paquetes la caché - fuente se usa para evitar analizar todos los ficheros de paquetes. - Opción de configuración: <literal/Dir::Cache::srcpkgcache/. - </VarListEntry> - - <VarListEntry><term><option/-q/</><term><option/--quiet/</> - <ListItem><Para> - Silencioso, produce una salida adecuada para su almacenamiento, omitiendo los - indicadores de progreso. Más q's producirán una salida más silenciosa, - hasta un máximo de 2. Además es posible usar <option/-q=#/ para - ajustar el nivel de silenciosidad, ignorando el fichero de - configuración. Opción de configuración: <literal/quiet/. - </VarListEntry> - - <VarListEntry><term><option/-i/</><term><option/--important/</> - <ListItem><Para> - Muestra sólo las dependencias importantes, se usa junto con - <literal/unmet/. Hace que sólo se muestren las dependencias y predependencias. - Opción de configuración: <literal/APT::Cache::Important/. - </VarListEntry> - - <VarListEntry><term><option/-f/</><term><option/--full/</> - <ListItem><Para> - Muestra todos los campos de información cuando se busque. Opción de - configuración: <literal/APT::Cache::ShowFull/. - </VarListEntry> - - <VarListEntry><term><option/-a/</><term><option/--all-versions/</> - <ListItem><Para> - Muestra la descripción completa de todos las versiones disponibles. Es el - comportamiento predeterminado, para desactivarlo use - <option/--no-all-versions/. Si se especifica <option/--no-all-versions/, - sólo se muestra la versión candidata (la que se seleccionaría para - instalar). Esta opción sólo es aplicable a la orden <literal/show/. Opción - de configuración: <literal/APT::Cache::AllVersions/. - </VarListEntry> - - <VarListEntry><term><option/-g/</><term><option/--generate/</> - <ListItem><Para> - Realiza una regeneración completa de la caché de paquetes en vez de - usarla tal y como está. Esta es la opción por omisión, para - desactivarlo use <option/--no-generate/. Opción de - configuración: <literal/APT::Cache::Generate/. - </VarListEntry> - - <VarListEntry><term><option/--names-only/</><term><option/-n/</> - <ListItem><Para> - Sólo busca en los nombres de paquetes, no en las descripciones largas. - Opción de configuración: <literal/APT::Cache::NamesOnly/. - </VarListEntry> - - <VarListEntry><term><option/--all-names/</> - <ListItem><Para> - Hace que <literal/pkgnames/ muestre todos los nombres, - incluyendo los paquetes virtuales y las dependencias insatisfechas. - Opción de configuración: <literal/APT::Cache::AllNames/. - </VarListEntry> - - <VarListEntry><term><option/--recurse/</> - <ListItem><Para> - Hace <literal/depends/ y <literal/rdepends/ recursivos de modo que todos - los paquetes mencionados se muestran sólo una vez. Opción de configuración - <literal/APT::Cache::RecurseDepends/. - </VarListEntry> - - <VarListEntry><term><option/--installed/</> - <ListItem><Para> - Limita la salida de <literal/depends/ y <literal/rdepends/ a paquetes - instalados. Opción de configuración: <literal/APT::Cache::Installed/. - </VarListEntry> - - - &apt-commonoptions; - - </VariableList> - </RefSect1> - - <RefSect1><Title>Ficheros</> - <variablelist> - <VarListEntry><term><filename>/etc/apt/sources.list</></term> - <ListItem><Para> - Fichero que contiene los sitios de donde se obtienen los paquetes. - Opción de configuración: <literal/Dir::Etc::SourceList/. - </VarListEntry> - - <VarListEntry><term><filename>&statedir;/lists/</></term> - <ListItem><Para> - Directorio donde se almacena la información del estado de cada paquete - fuente por cada sitio especificado &sources-list; - Opción de configuración: <literal/Dir::State::Lists/. - </VarListEntry> - - <VarListEntry><term><filename>&statedir;/lists/partial/</></term> - <ListItem><Para> - Directorio de almacenamiento para la información de estado en - tránsito. Opción de Configuración: <literal/Dir::State::Lists/ - (lo que implica que no estarán completos). - </VarListEntry> - </variablelist> - </RefSect1> - - <RefSect1><Title>Vea además</> - <para> - &apt-conf;, &sources-list;, &apt-get; - </RefSect1> - - <RefSect1><Title>Diagnósticos</> - <para> - <command/apt-cache/ devuelve cero en operaciones satisfactorias, 100 en caso - de error. - </RefSect1> - - &manbugs; - &manauthor; - <RefSect1><Title>Tradución</> - <para> - Página del manual traducida por Rubén Porras <email>nahoo@inicia.es</>, - revisada por Gustavo Saldumbide <email>gsal@adinet.com.uy</>. - </RefSect1> -</refentry> -<!-- Keep this comment at the end of the file -Local variables: -mode: sgml -sgml-omittag:nil -sgml-shorttag:t -sgml-namecase-general:t -sgml-general-insert-case:lower -sgml-minimize-attributes:nil -sgml-always-quote-attributes:t -sgml-indent-step:1 -sgml-indent-data:t -sgml-parent-document:nil -sgml-exposed-tags:nil -sgml-local-catalogs:("/usr/lib/sgml/catalog") -sgml-local-ecat-files:nil -End: ---> diff --git a/doc/es/apt-cdrom.es.8.sgml b/doc/es/apt-cdrom.es.8.sgml deleted file mode 100644 index 266423890..000000000 --- a/doc/es/apt-cdrom.es.8.sgml +++ /dev/null @@ -1,167 +0,0 @@ -<!-- -*- mode: sgml; mode: fold -*- --> -<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V3.1//EN" [ - -<!ENTITY % aptent SYSTEM "apt.ent.es"> -%aptent; - -]> - -<!-- -(c) 2003 Software in the Public Interest -Esta traducción ha sido realizada por Rubén Porras Campo <nahoo@inicia.es> -Está basada en la página de manual original: -versión 1.2 del CVS de -/cvs/debian-doc/manpages/english/apt/apt-cdrom.8.sgml ---> - -<refentry lang=es> - &apt-docinfo; - - <refmeta> - <refentrytitle>apt-cdrom</> - <manvolnum>8</> - </refmeta> - - <!-- Man page title --> - <refnamediv> - <refname>apt-cdrom</> - <refpurpose>utilidad APT para administración del CDROM</> - </refnamediv> - - <!-- Arguments --> - <refsynopsisdiv> - <cmdsynopsis> - <command>apt-cdrom</> - <arg><option>-hvrmfan</></arg> - <arg><option>-d=<replaceable/cdrom punto_de_montaje/</></arg> - <arg><option>-o=<replaceable/cadena de configuración/</></arg> - <arg><option>-c=<replaceable/fichero/</></arg> - <group choice=req> - <arg>add</> - <arg>ident</> - </group> - </cmdsynopsis> - </refsynopsisdiv> - -<RefSect1><Title>Descripción</> - <para> - <command/apt-cdrom/ se usa para añadir un CDROM nuevo a la lista de recursos - disponibles de APT. <command/apt-cdrom/ determina la estructura del disco, - corrige varios errores de grabación posibles y verifica los ficheros con - los índices. - <para> - Es necesario usar <command/apt-cdrom/ para añadir CDs al sistema APT, - no puede hacerse manualmente. Además cada unidad de un conjunto de discos - debe de ser analizada por separado para detectar los posibles errores de - grabación. - - <para> - A menos que se de una de las opciones <option/-h/, o <option/--help/ - una de las siguientes órdenes deben de estar presentes. - - <VariableList> - <VarListEntry><Term>add</Term> - <ListItem><Para> - <literal/add/ para añadir un disco nuevo a la lista de recursos. - Desmontará el dispositivo de CDROM, pedirá que se inserte un disco y - procederá a analizar y copiar los ficheros de índices. Si el disco - no contiene el directorio apropiado <filename>.disk/</> se mostrará un - mensaje descriptivo. - - <para> - APT usa un identificador de CDROM para reconocer que disco está actualmente - en la unidad lectora y mantiene una lista de estos identificadores en - <filename>&statedir;/cdroms.list</> - </VarListEntry> - - <VarListEntry><Term>ident</Term> - <ListItem><Para> - Una herramienta de depuración para informar de identidad del disco actual - así como del nombre guardado. - </VarListEntry> - </VariableList> - </RefSect1> - - <RefSect1><Title>Opciones</> - &apt-cmdblurb; - - <VariableList> - <VarListEntry><term><option/-d/</><term><option/--cdrom/</> - <ListItem><Para> - Punto de montaje. Especifica el lugar donde se debe montar el cdrom. - Este punto de montaje debe estar listado en <filename>/etc/fstab</> y - configurado correctamente. - Opción de Configuración: <literal/Acquire::cdrom::mount/. - </VarListEntry> - - <VarListEntry><term><option/-r/</><term><option/--rename/</> - <ListItem><Para> - Renombrar un disco. Cambia la etiqueta de un disco. Esta opción hará que - <command/apt-cdrom/ pregunte una nueva etiqueta. - Opción de Configuración: <literal/APT::CDROM::Rename/. - </VarListEntry> - - <VarListEntry><term><option/-m/</><term><option/--no-mount/</> - <ListItem><Para> - No montar. Evita que <command/apt-cdrom/ monte y desmonte el punto de - montaje. - Opción de Configuración: <literal/APT::CDROM::NoMount/. - </VarListEntry> - - <VarListEntry><term><option/-f/</><term><option/--fast/</> - <ListItem><Para> - Rápido. Asumir que los ficheros con los paquetes son válidos y no - comprobar todos los paquetes. Esta opción sólo se debe de usar si - <command/apt-cdrom/ comprobó el disco con anterioridad y no detectó - ningún error. - Opción de Configuración: <literal/APT::CDROM::Fast/. - </VarListEntry> - - <VarListEntry><term><option/-a/</><term><option/--thorough/</> - <ListItem><Para> - Comprobación meticulosa de los paquetes. Esta opción puede ser necesaria - con algunos discos viejos de Debian 1.1/1.2 que tienen los ficheros de - los paquetes en lugares extraños. Tardará mucho más en analizar el CD, - pero encontrará todos los paquetes. - </VarListEntry> - - <VarListEntry><term><option/-n/</> - <term><option/--just-print/</> - <term><option/--recon/</> - <term><option/--no-act/</> - <ListItem><Para> - No cambiar nada. No cambiar el fichero &sources-list; y no escribir - los ficheros de índices. Sin embargo sigue haciendo todas las - comprobaciones. - Opción de Configuración: <literal/APT::CDROM::NoAct/. - </VarListEntry> - - &apt-commonoptions; - - </VariableList> - </RefSect1> - - <RefSect1><Title>Véase también</> - <para> - &apt-conf;, &apt-get;, &sources-list; - </RefSect1> - - <RefSect1><Title>Diagnósticos</> - <para> - <command/apt-cdrom/ devuelve cero en una operaciones satisfactorias, - el decimal 100 en caso de error. - </RefSect1> - - &manbugs; - &manauthor; - - <refsect1> - <title>TRADUCTOR - - Traducción de Rubén Porras Campo - <debian-l10n-spanish@lists.debian.org> - - - - - diff --git a/doc/es/apt-config.es.8.sgml b/doc/es/apt-config.es.8.sgml deleted file mode 100644 index 33b853965..000000000 --- a/doc/es/apt-config.es.8.sgml +++ /dev/null @@ -1,123 +0,0 @@ - - -%aptent; - -]> - - - - - &apt-docinfo; - - - apt-config - 8 - - - - - apt-config - Programa para la consulta de configuración de APT - - - - - - apt-config - - - - - shell - dump - - - - - Descripción</> - <para> - <command/apt-config/ es un programa interno usado por varios programas del - conjunto de herramientas APT para proporcionar una configurabilidad - coherente.Este accede al archivo principal de configuración - <filename>/etc/apt/apt.conf</> de forma que sea fácil de usar por scripts. - <para> - A menos que se incluya la opción <option/-h/ o <option/--help/, una de de - los siguientes órdenes debe estar presente. - </para> - - <VariableList> - <VarListEntry><Term>shell</Term> - <ListItem><Para> - shell se usa para acceder a la información de configuración de un fichero - de órdenes (shell script). Este proporciona 2 argumentos, el primero es - una variable del intérprete de órdenes, y el segundo el valor de - configuración para la petición. Como salida muestra una serie de listas - de órdenes asignados al intérprete de órdenes por cada valor presente. En - un fichero de órdenes, este debería usarse como: - </para> - -<informalexample><programlisting> -OPTS="-f" -RES=`apt-config shell OPTS MyApp::Options` -eval $RES -</programlisting></informalexample> - - <para> - Esto debería fijar la variable de entorno del intérprete de órdenes $OPTS - al valor deMyApp::Opciones, con un valor por omisión de <option/-f/. - - <para> - El elemento de configuración podría ser corregido después con /[fdbi]. f - devuelve nombres de ficheros, d devuelve los directorios, b devuelve - verdadero o falso e i devuelve un número entero. Cada uno de los valores - devueltos es normalizado y verificado internamente. - </VarListEntry> - - <VarListEntry><Term>dump</Term> - <ListItem><Para> - Sólo muestra el contenido del espacio de configuración. - </VarListEntry> - - </VariableList> - </RefSect1> - - <RefSect1><Title>Opciones</> - &apt-cmdblurb; - - <VariableList> - - &apt-commonoptions; - - </VariableList> - </RefSect1> - - <RefSect1><Title>Vea además</> - <para> - &apt-conf; - </RefSect1> - - <RefSect1><Title>Diagnósticos</> - <para> - <command/apt-config/ devuelve el valor cero en una operación normal, 100 si ocurre un error. - </RefSect1> - - &manbugs; - &manauthor; - - <refsect1> - <title>TRADUCTOR - - Traducción de Carlos Mestre - <debian-l10n-spanish@lists.debian.org> - - - - diff --git a/doc/es/apt-get.es.8.sgml b/doc/es/apt-get.es.8.sgml deleted file mode 100644 index 33ccc1f98..000000000 --- a/doc/es/apt-get.es.8.sgml +++ /dev/null @@ -1,558 +0,0 @@ - - -%aptent; - -]> - - - - - &apt-docinfo; - - - apt-get - 8 - - - - - apt-get - utilidad de manejo de paquetes APT -- interfaz en - línea de ordenes. - - - - - - apt-get - - - - - update - upgrade - dselect-upgrade - install paquete - remove paquete - source paquete - build-dep paquete - check - clean - autoclean - - - - - Descripción</> - <para> - <command/apt-get/ es la herramienta en línea de órdenes usada para - el manejo de paquetes, también es la herramienta usada por otras - que dependen de la biblioteca APT. Hay varias interfaces disponibles, como - dselect(8), aptitude, synaptic, gnome-apt and wajig. - <para> - Se debe proporcionar una de las siguientes órdenes a menos que se - den las opciones <option/-h/, o <option/--help/. - - <VariableList> - <VarListEntry><Term>update</Term> - <ListItem><Para> - <literal/update/ se usa para sincronizar el índice de - paquetes respecto a sus fuentes. Los índices de paquetes - disponibles se obtienen de los lugares especificados en - <filename>/etc/apt/sources.list</>. Por ejemplo, cuando se usa - un archivo de Debian, esta orden descarga y analiza los - ficheros <filename>Packages.gz</>, de tal forma que la - información acerca de nuevos paquetes pasa a estar - disponible. Siempre se debe realizar un <literal/update/ - antes de un <literal/upgrade/ o un <literal/dist-upgrade/. Se - debe tener en cuenta que el indicador de progreso será - incorrecto, ya que el tamaño de los próximos ficheros con - información sobre paquetes es desconocido hasta el momento de - su descarga. - </VarListEntry> - - <VarListEntry><Term>upgrade</Term> - <ListItem><Para> - <literal/upgrade/ se usa para instalar la versión más - nueva de todos los paquetes instalados en el sistema - provenientes de alguna de las fuentes listadas en - <filename>/etc/apt/sources.list</>. Los paquetes - instalados con una nueva versión disponible son descargados y - actualizados, bajo ninguna circunstancia se desinstalarán paquetes, o - se instalarán paquetes nuevos. Las nuevas versiones de programas - instalados que no puedan ser actualizados sin cambiar el estado de - instalación de otros paquetes no se instalarán, manteniéndose la - versión actual. Debe realizarse un <literal/update/ antes para - que <command/apt-get/ sepa cuales son las versiones disponibles - de los paquetes. - </VarListEntry> - - <VarListEntry><Term>dselect-upgrade</Term> - <ListItem><Para> - <literal/dselect-upgrade/ - se usa junto con el tradicional administrador de paquetes de Debian - GNU/Linux, &dselect;. <literal/dselect-upgrade/ recoge los - cambios hechos al campo de <literal/Status/ de los paquetes - disponibles por &dselect;, y realiza las acciones necesarias - para que los cambios se lleven a cabo (por ejemplo, borrar - paquetes antiguos e instalar las nuevas versiones). - </VarListEntry> - - <VarListEntry><Term>dist-upgrade</Term> - <ListItem><Para> - <literal/dist-upgrade/, además de realizar las acciones de - <literal/upgrade/, maneja inteligentemente los cambios de - dependencias debidos a nuevas versiones de paquetes, - <command/apt-get/ tiene un sofisticado sistema de resolución de - conflictos, si es necesario tratará de actualizar los paquetes - más importantes a costa de los menos importantes. El fichero - <filename>/etc/apt/sources.list</> contiene la lista de sitios - de los cuales se descargan los ficheros. - También puede consultar &apt-preferences; si quiere modificar este - comportamiento para paquetes individuales. - </VarListEntry> - - <VarListEntry><Term>install</Term> - <ListItem><Para> - <literal/install/ instala los paquetes que siguen a la palabra - install. Cada nombre de paquete no es el nombre completo del - paquete junto con la versión de Debian, sino sólo el nombre del - paquete (por ejemplo, en un sistema Debian GNU/Linux, el - argumento sería libc6, no <literal/libc6_1.9.6-2.deb/). Se obtendrán e - instalarán todos los paquetes especificados para la - instalación, así como los requeridos por estos. El fichero - <filename>/etc/apt/sources.list</> se usa para localizar los - paquetes. Si al nombre del paquete se le antepone un guión (sin - ningún espacio), el paquete será desinstalado en vez de - instalado. Similarmente el signo del la suma se puede usar para - especificar que un paquete debe de ser instalado. Esta últimas - características se pueden usar para modificar decisiones - tomadas por el sistema de resolución de conflictos de apt-get. - <para> - Se puede seleccionar una versión especifica de un paquete - poniendo a continuación del paquete un igual ('=') seguido de - la versión deseada. Alternativamente se puede seleccionar una - distribución especifica poniendo a continuación del nombre del - paquete una barra ('/') seguido de la versión de la - distribución o su nombre en el archivo de Debian (stable, - testing, unstable). - <para> - Cualquiera de estos dos métodos de selección puede instalar una - versión anterior de los paquetes y debe ser usada con cuidado. - <para> - Finalmente, &apt-preferences; permite modificar las normas de selección - para paquetes individuales. - <para> - Si ningún paquete coincide con la expresión que se ha dado y la - expresión contiene un '.', '?' o un '*', entonces se asume que es una - expresión regular de acuerdo con el estándar POSIX, y es aplicada a - todos los nombres de paquetes de la base de datos. Cualquier - coincidencia se instala (o desinstala). Tenga en cuenta que la - comparación se hace en subcadenas, de manera que 'lo.*' es válido - para 'how-lo' y para 'lowest'. Si este no es el comportamiento deseado - se debe anclar la expresión regular con un '^' o un '$', o bien crear una - expresión regular más específica. - </VarListEntry> - - <VarListEntry><Term>remove</Term> - <ListItem><Para> - <literal/remove/ se comporta del mismo modo que <literal/install/ - con la diferencia de que desinstala los paquetes en vez de - instalarlos. Si un signo más precede al nombre del paquete (sin - ningún espacio en blanco entre los dos), el paquete en cuestión - será instalado en vez de eliminado. - </VarListEntry> - - <VarListEntry><Term>source</Term> - <ListItem><Para> - <literal/source/ hace que <command/apt-get/ descargue paquetes - fuente. APT examinará los paquetes disponibles para decidir que - paquete fuente cogerá. Entones descargará en el directorio - actual la versión más reciente del paquete fuente. Los paquetes - fuente se obtienen de sitios distintos a los binarios, estos - sitios se especifican mediante líneas del tipo - <literal/deb-src/ en el fichero &sources-list;. Esto puede - provocar que la versión que descargará del paquete fuente no - coincida con la del paquete binario que tenga instalado o - pueda instalar. Si se especifica el argumento --compile - entonces el paquete se compilará usando dpkg-buildpackage para - producir un .deb binario, si se especifica el argumento - --download-only entonces el paquete fuente no se desempaquetará. - <para> - Una versión especifica de un paquete fuente puede requerirse - poniendo un signo igual ('=') seguido de la versión a descargar - después del nombre del paquete. Es un mecanismo similar al que - se usa con los paquetes binarios. Esto permite seleccionar - exactamente el nombre y versión del paquete fuente, activando - implícitamente la opción <literal/APT::Get::Only-Source/. - - <para> - Dese cuenta que los paquetes fuentes no se tratan como los binarios, sólo - existen en el directorio actual, es parecido a descargar los paquetes tar - comprimidos con las fuentes. - </VarListEntry> - - <VarListEntry><Term>build-dep</Term> - <ListItem><Para> - <literal/build-dep/ hace que apt-get instale/desinstale paquetes - en un intento de satisfacer las dependencias de compilación de - un paquete fuente. Por el momento si hay varios paquetes que - satisfacen la misma dependencia, apt-get elige uno aleatoriamente. - </VarListEntry> - - <VarListEntry><Term>check</Term> - <ListItem><Para> - <literal/check/ es una herramienta de diagnóstico. Actualiza la - caché de paquetes (/var/cache/apt/pkgcache.bin), vuelve a crear - un nuevo árbol de dependencias y busca dependencias imposibles - de resolver. - </VarListEntry> - - <VarListEntry><Term>clean</Term> - <ListItem><Para> - <literal/clean/ borra totalmente el repositorio local que - contiene los ficheros .deb descargados. Borra todo excepto el - fichero de bloqueo de los directorios - <filename>&cachedir;/archives/</> y - <filename>&cachedir;/archives/partial/</>. Cuando APT se usa como - un método de &dselect;, <literal/clean/ se ejecuta - automáticamente. Si usted no usa dselect es probable que desee - ejecutar <literal/apt-get clean/ de vez en cuando para liberar - algo de espacio en disco. - </VarListEntry> - - <VarListEntry><Term>autoclean</Term> - <ListItem><Para> - Al igual que <literal/clean/, <literal/autoclean/ borra el - repositorio local de paquetes descargados. La diferencia reside - en que sólo borrará aquellos paquetes que ya no pueden ser - descargados, o son claramente inservibles. Esto permite - mantener la caché durante largos periodos de tiempo sin que - aumente su tamaño sin control. Si la opción de configuración - <literal/APT::Clean-Installed/ está desactivada impedirá que se - borren paquetes instalados. - </VarListEntry> - </VariableList> - </RefSect1> - - <RefSect1><Title>Opciones</> - &apt-cmdblurb; - - <VariableList> - <VarListEntry><term><option/-d/</><term><option/--download-only/</> - <ListItem><Para> - Sólo descarga los ficheros con los paquetes, no los desempaqueta - ni los instala. Opción de Configuración: - <literal/APT::Get::Download-Only/. - </VarListEntry> - - <VarListEntry><term><option/-f/</><term><option/--fix-broken/</> - <ListItem><Para> - Intenta arreglar un sistema con dependencias actualmente rotas. Esta - opción usada conjuntamente con install/remove, puede omitir cualquier - paquete para permitir a APT deducir una posible solución. Cualquier paquete - especificado debe de corregir totalmente el problema. La opción es a - veces necesaria cuando se ejecuta apt por primera vez. APT no permite - que existan dependencias de paquetes rotas en un sistema. Es posible - que la estructura de dependencias de un sistema esté tan deteriorada - que requiera una intervención manual (usualmente ejecutar - &dselect; o <command/dpkg --remove/ para desinstalar alguno de - los paquetes que crean el conflicto). El uso de esta opción - junto con <option/-m/ puede producir un error en algunas - situaciones. Opción de Configuración: <literal/APT::Get::Fix-Broken/. - </VarListEntry> - - <VarListEntry><term><option/-m/</><term><option/--ignore-missing/</> - <term><option/--fix-missing/</> - <ListItem><Para> - No tiene en cuenta los paquetes que no se hayan podido descargar o que - después de la descarga se encuentren dañados, estos paquetes se tratan - como no modificables y se continúa con el resto. Usar esta opción junto - con <option/-f/ puede producir un error en algunas situaciones. Si un - paquete se selecciona para su normal instalación (particularmente si - se hace mediante la línea de órdenes) y no puede ser descargado, - será tratado como no modificable. Opción de Configuración: - <literal/APT::Get::Fix-Missing/. - </VarListEntry> - - <VarListEntry><term><option/--no-download/</> - <ListItem><Para> - Deshabilita la descarga de paquetes. Usada junto con - <option/--ignore-missing/ es la mejor manera de forzar a APT a usar - solo los .debs que ya se han descargado con anterioridad. - Opción de Configuración: <literal/APT::Get::Download/. - </VarListEntry> - - <VarListEntry><term><option/-q/</><term><option/--quiet/</> - <ListItem><Para> - Silencioso. Produce una salida adecuada para un registro, - omitiendo los indicadores de progreso. Si se especifican más q's - (hasta un máximo de 2) se conseguirá una salida más - silenciosa. También es posible usar <option/-q=#/ para - seleccionar el nivel de silenciosidad, no teniendo en cuenta el - fichero de configuración. Dese cuenta que un nivel silencioso de - 2 implica <option/-y/, por lo tanto nunca se deberá usar -qq sin - añadir un modificador para que no realice ninguna acción como - -d, --print-uris o -s para evitar que APT realice algo que usted - no espera. Opción de Configuración: <literal/quiet/. - </VarListEntry> - - <VarListEntry><term><option/-s/</> - <term><option/--simulate/</> - <term><option/--just-print/</> - <term><option/--dry-run/</> - <term><option/--recon/</> - <term><option/--no-act/</> - <ListItem><Para> - No realiza ninguna acción; simula lo que hubiese ocurrido, pero sin - hacer cambios reales en el sistema. Opción de Configuración: - <literal/APT::Get::Simulate/. - <para> - La simulación muestra por pantalla una serie de líneas, cada una de - las cuales representa una operación de dpkg, configurar (Conf), - desinstalar (Remv), o desempaquetar (Inst). Un par de corchetes - indican paquetes con dependencias rotas, si no hay nada entre ellos - significa que no hay ningún problema (poco probable). - </VarListEntry> - - <VarListEntry><term><option/-y/</><term><option/--yes/</> - <term><option/--assume-yes/</> - <ListItem><Para> - Asume una respuesta afirmativa a todas las preguntas, de esta forma - apt-get se ejecuta sin necesidad de intervención posterior para tomar - decisiones. <literal/apt-get/ terminará sin hacer nada si se - produjese una situación no deseada, como cambiar un paquete - puesto en hold (un paquete puesto en hold es un paquete que no - debe de ser modificado) o desinstalar un paquete esencial. - Opción de Configuración: <literal/APT::Get::Assume-Yes/. - </VarListEntry> - - <VarListEntry><term><option/-u/</><term><option/--show-upgraded/</> - <ListItem><Para> - Muestra los paquetes que se van a actualizar. Opción de Configuración: - <literal/APT::Get::Show-Upgraded/. - </VarListEntry> - - <VarListEntry><term><option/-V/</><term><option/--verbose-versions/</> - <ListItem><Para> - Muestra la versión completa para los paquetes actualizados e instalados. - Opción de configuración: <literal/APT::Get::Show-Versions/. - </VarListEntry> - - <VarListEntry><term><option/-b/</><term><option/--compile/</> - <term><option/--build/</> - <ListItem><Para> - Descarga las fuentes y luego las compila. - Opción de Configuración: <literal/APT::Get::Compile/. - </VarListEntry> - - <VarListEntry><term><option/--ignore-hold/</> - <ListItem><Para> - No respeta los paquetes retenidos. Esto puede ser interesante junto con - <literal/dist-upgrade/ para no tener en cuenta un gran número de - paquetes en hold. Opción de Configuración: <literal/APT::Ignore-Hold/. - </VarListEntry> - - <VarListEntry><term><option/--no-upgrade/</> - <ListItem><Para> - No actualiza los paquetes. Cuando se usa juntamente con - <literal/install/, <literal/no-upgrade/ evita que se actualicen los - paquetes listados en la línea de órdenes si ya están previamente - instalados. Opción de Configuración: <literal/APT::Get::Upgrade/. - </VarListEntry> - - <VarListEntry><term><option/--force-yes/</> - <ListItem><Para> - Supone una respuesta afirmativa a todas las preguntas. Ésta es una - opción peligrosa que hará que apt-get continúe incluso si va a - realizar algo potencialmente peligros. No se debe usar excepto - en situaciones muy especiales. ¡<literal/force-yes/ puede - destruir su sistema! Opción de Configuración: - <literal/APT::Get::force-yes/. - </VarListEntry> - - <VarListEntry><term><option/--print-uris/</> - <ListItem><Para> - Muestra las URIs de los ficheros a instalar en vez de - descargarlos. Cada URI tiene la dirección de donde se obtendrá - el paquete, el fichero de destino, su tamaño y la suma de - control md5 esperada. Dese cuenta que el nombre de fichero no - siempre coincide con el nombre de fichero en el sitio - remoto. Esto también funciona con las ordenes <literal/source/ y - <literal/update/. Cuando se usa con la orden <literal/update/, - no se incluyen ni la suma de control MD5 ni el tamaño, y es - tarea del usuario descomprimir cualquier fichero comprimido. - Opción de Configuración: <literal/APT::Get::Print-URIs/. - </VarListEntry> - - <VarListEntry><term><option/--purge/</> - <ListItem><Para> - Borra los archivos de configuración de todos los paquetes que sean - desinstalados. Se mostrará un asterisco '*' a continuación de los paquetes - que se encuentren en esta situación. Opción de Configuración: - <literal/APT::Get::Purge/. - </VarListEntry> - - <VarListEntry><term><option/--reinstall/</> - <ListItem><Para> - Reinstala los paquetes ya instalados, incluso si son la última versión - disponible del paquete. Opción de Configuración: - <literal/APT::Get::ReInstall/. - </VarListEntry> - - <VarListEntry><term><option/--list-cleanup/</> - <ListItem><Para> - Esta opción está activada por omisión, si quiere desactivarla use - <literal/--no-list-cleanup/. Cuando está activada - <command/apt-get/ administra automáticamente los contenidos de - <filename>&statedir;/lists</> para asegurarse de que se borran - los ficheros obsoletos. La única razón para desactivarla es un - cambio frecuente en la lista de repositorios que usa - apt-get. Opción de Configuración: <literal/APT::Get::List-Cleanup/. - </VarListEntry> - - <VarListEntry><term><option/-t/</> - <term><option/--target-release/</> - <term><option/--default-release/</> - <ListItem><Para> - Esta opción permite tener un control sobre la versión de la - distribución desde la cual se instalan los paquetes de manera - sencilla, creando un pin de 990 usando la cadena de caracteres - proporcionada que hace referencia a la distribución. Algunos ejemplos - comunes pueden ser <option>-t '2.1*'</> o <option>-t unstable</>. - Opción de configuración: <literal/APT::Default-Release/. - Vea además la página del manual de &apt-preferences;. - </VarListEntry> - - <VarListEntry><term><option/--trivial-only/</> - <ListItem><Para> - Sólo realiza acciones consideradas triviales. Esta opción está - relacionada con <option/--assume-yes/, donde <option/--assume-yes/ - responderá afirmativamente a cualquier pregunta, - <option/--trivial-only/ responderá negativamente. - Opción de configuración: <literal/APT::Get::Trivial-Only/. - </VarListEntry> - - <VarListEntry><term><option/--no-remove/</> - <ListItem><Para> - Si algún paquete va a ser desinstalado apt-get termina inmediatamente. - Opción de Configuración: <literal/APT::Get::Remove/ - </VarListEntry> - - <VarListEntry><term><option/--only-source/</> - <ListItem><Para> - Sólo tiene sentido para la orden <literal/source/. Indica que los - nombres de paquetes fuente dados no deben ser tratados a - través de la tabla de binarios. Esto significa que si se especifica esta - opción, la orden <literal/source/ sólo aceptará como argumentos nombres de - paquetes fuente, en vez de aceptar nombres de paquetes binarios y luego - buscar el nombre del paquete fuente correspondiente. - Opción de Configuración: <literal/APT::Get::Only-Source/ - </VarListEntry> - - <VarListEntry><term><option/--diff-only/</><term><option/--tar-only/</> - <ListItem><Para> - Descarga sólo el fichero diff o tar del archivo fuente. - Opciones de Configuración: <literal/APT::Get::Diff-Only/ y - <literal/APT::Get::Tar-Only/ - </VarListEntry> - - <VarListEntry><term><option/--arch-only/</> - <ListItem><Para> - Procesa sólo las dependencias de construcción dependientes de la - arquitectura. Opción de configuración: <literal/APT::Get::Arch-Only/ - </VarListEntry> - - &apt-commonoptions; - - </VariableList> - </RefSect1> - - <RefSect1><Title>Ficheros</> - <variablelist> - <VarListEntry><term><filename>/etc/apt/sources.list</></term> - <ListItem><Para> - Fichero que contiene los sitios de donde se obtienen los paquetes. - Opción de Configuración: <literal/Dir::Etc::SourceList/. - </VarListEntry> - - <VarListEntry><term><filename>/etc/apt/apt.conf</></term> - <ListItem><Para> - Fichero de configuración de APT. - Opción de Configuración: <literal/Dir::Etc::Main/. - </VarListEntry> - - <VarListEntry><term><filename>/etc/apt/apt.conf.d/</></term> - <ListItem><Para> - Directorio con fragmentos de ficheros de configuración APT. - Opción de Configuración: <literal/Dir::Etc::Parts/. - </VarListEntry> - - <VarListEntry><term><filename>/etc/apt/preferences</></term> - <ListItem><Para> - Fichero de configuración que contiene preferencias sobre versiones de - paquetes, por ejemplo, puede especificar que un cierto paquete se descargue - de un sitio diferente, o de una distribución con una versión diferente. - Opción de Configuración: <literal/Dir::Etc::Preferences/. - </VarListEntry> - - <VarListEntry><term><filename>&cachedir;/archives/</></term> - <ListItem><Para> - Directorio donde se guardan los paquetes obtenidos. - Opción de Configuración: <literal/Dir::Cache::Archives/. - </VarListEntry> - - <VarListEntry><term><filename>&cachedir;/archives/partial/</></term> - <ListItem><Para> - Directorio donde se guardan los ficheros en tránsito. - Opción de Configuración: <literal/Dir::Cache::Archives/ (Implica partial). - </VarListEntry> - - <VarListEntry><term><filename>&statedir;/lists/</></term> - <ListItem><Para> - Directorio donde se almacena información de estado por cada - sitio especificado en &sources-list; - Opción de Configuración: <literal/Dir::State::Lists/. - </VarListEntry> - - <VarListEntry><term><filename>&statedir;/lists/partial/</></term> - <ListItem><Para> - Directorio de almacenamiento para la información de estado en tránsito. - Opción de Configuración: <literal/Dir::State::Lists/ (Implica partial). - </VarListEntry> - </variablelist> - </RefSect1> - - <RefSect1><Title>Vea además</> - <para> - &apt-cache;, &apt-cdrom;, &dpkg;, &dselect;, &sources-list;, &apt-conf;, - &apt-config;, la guía de usuario de APT en &docdir;, &apt-preferences;, el - Cómo de APT. - </RefSect1> - - <RefSect1><Title>Diagnósticos</> - <para> - <command/apt-get/ devuelve cero en operaciones satisfactorias, 100 en caso - de error. - </RefSect1> - - &manbugs; - &manauthor; - - <refsect1> - <title>TRADUCTOR - - Traducción de Rubén Porras Campo - <debian-l10n-spanish@lists.debian.org> - - - - diff --git a/doc/es/apt.conf.es.5.sgml b/doc/es/apt.conf.es.5.sgml deleted file mode 100644 index 53ff58a3d..000000000 --- a/doc/es/apt.conf.es.5.sgml +++ /dev/null @@ -1,447 +0,0 @@ - - -%aptent; - -]> - - - - - &apt-docinfo; - - - apt.conf - 5 - - - - - apt.conf - Archivo de configuración de APT - - - Descripción</> - <para> - <filename/apt.conf/ es el fichero principal de configuración del conjunto de - herramientas APT, todas las herramientas hacen uso del fichero de - configuración y un analizador común de sintaxis de la línea de órdenes - para proporcionar un entorno uniforme. Cuando se inicia una utilidad APT, - este leerá la configuración especificada en la variable de entorno - <envar/APT_CONFIG/ (si existe), luego leerá los ficheos en - <literal/Dir::Etc::Parts/, entonces leerá el fichero de configuración - principal especificado por <literal/Dir::Etc::main/, finalmente aplicará - las opciones de la línea de órdenes para reescribir la directrices de la - configuración, posiblemente cargando incluso más ficheros de configuración. - <para> - El fichero de configuración está organizado en forma de árbol con las - opciones organizadas en grupos funcionales. Las opciones especificadas son - dadas con dobles dos puntos, por ejemplo <literal/APT::Get::Assume-Yes/ es - un opción de la función GET del conjunto de herramientas APT. - Las opciones no son heredadas de sus grupos padres. - <para> - Sintácticamente, el lenguaje de configuración es modelado como en utilidades - ISC, como bind y dhcp. Las líneas que comienzan con <literal>//</literal> se - tratan como comentarios (se ignoran). Cada línea es de la forma - <literallayout>APT::Get::Assume-Yes "true";</literallayout> Los - espacios entre los dos puntos son obligatorios, y las comillas son - opcionales. Un nuevo ámbito puede abrirse con llaves, por ejemplo: -<informalexample><programlisting> -APT { - Get { - Assume-Yes "true"; - Fix-Broken "true"; - }; -}; -</programlisting></informalexample> - con nuevas líneas en cada lugar para hacerlo más legible. Las listas pueden - crearse abriendo un nuevo ámbito e incluyendo una única palabra acotada - entre comillas seguido de un punto y coma. Pueden ser incluidas múltiples - entradas, cada una separada por un punto y coma. -<informalexample><programlisting> -DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt";}; -</programlisting></informalexample> - <para> - En general, el fichero de configuración de ejemplo - <filename>&docdir;examples/apt.conf</> &configureindex; es una buena guía - para entender su aspecto. - <para> - Se permiten dos valores especiales, <literal/#include/ y <literal/#clear/. - <literal/#include/ incluirá el fichero dado, a menos que el final del nombre - del fichero acabe en una barra, entonces se incluye el directorio entero. - <literal/#clear/ se usa para suprimir la lista de nombres. - <para> - Todas las utilidades APT permiten la opción -o como una directriz - arbitraria de configuración que es especificada en la línea de órdenes. La - sintaxis es un nombre de opción completo (<literal/APT::Get::Assume-Yes/ - por ejemplo) seguido por signos de igualdad y el nuevo valor de la - opción. Las listas también pueden ser añadidas incluyendo :: al final del - nombre de la lista. - </RefSect1> - - <RefSect1><Title>El grupo APT</> - <para> - Este grupo de opciones controlan la conducta general de APT así como el - mantenimiento de las opciones para todas las utilidades. - <VariableList> - <VarListEntry><Term>Arquitectura</Term> - <ListItem><Para> - Arquitectura del sistema; ajusta la arquitectura a usar cuando se obtengan - los ficheros y se analicen las listas de paquetes. El valor por defecto es - la arquitectura para la que ha sido compilado apt. - </VarListEntry> - - <VarListEntry><Term>Ignore-Hold</Term> - <ListItem><Para> - Ignorar paquetes retenidos: Esta opción global causa que el solucionador de - problemas ignore paquetes retenidos cuando tome decisiones. - </VarListEntry> - - <VarListEntry><Term>Clean-Installed</Term> - <ListItem><Para> - Activo por defecto. Cuando se activa la función de auto-limpieza, ésta - eliminará cualquier paquete de la caché que ya no pueda descargarse. Si se - desactiva, entonces los paquetes que están localmente instalados son - excluidos de la limpieza - nótese que APT no provee ningún medio directo - para reinstalarlos. - </VarListEntry> - - <VarListEntry><Term>Immediate-Configure</Term> - <ListItem><Para> - Deshabilita la configuración inmediata: Esta peligrosa opción - deshabilita algunas partes del código de ordenación de APT para inducir a éste - a hacer pocas llamadas a dpkg. Hacer esto podría ser necesario en algún - sistema de usuario extremadamente lento, pero sería muy peligroso y - podría causar que los scripts de instalación del paquete fallaran o algo - peor. Úselo a su cuenta y riesgo. - </VarListEntry> - - <VarListEntry><Term>Force-LoopBreak</Term> - <ListItem><Para> - Nunca habilite esta opción a menos que usted -realmente- conozca lo que - está haciendo. Esto permite a APT eliminar temporalmente un paquete - esencial para romper conflictos o bucles conflictos/pre-dependencias - entre dos paquetes esenciales. EL BUCLE NO DEBERÍA EXISTIR NUNCA COMO TAL - Y ES UN ERROR GRAVE. Esta opción trabajará si el paquete esencial no es - tar, gzip, libc, dpkg, bash o cualquier otro del que dependan estos - paquetes. - </VarListEntry> - - <VarListEntry><Term>Cache-Limit</Term> - <ListItem><Para> - APT usa un fichero de caché de memoria mapeada de tamaño fijo para - almacenar la información disponible. Esto fija el tamaño de esa caché. - </VarListEntry> - - <VarListEntry><Term>Build-Essential</Term> - <ListItem><Para> - Define que paquete(s) son considerados dependencias de construcción - esenciales. - </VarListEntry> - - <VarListEntry><Term>Get</Term> - <ListItem><Para> - La subsección Get controla la herramienta &apt-get;, por favor, mire su - documentación para más información sobre esta opción. - </VarListEntry> - - <VarListEntry><Term>Cache</Term> - <ListItem><Para> - La subsección Cache controla la herramienta &apt-cache;, por favor, mire - su documentación para más información sobre esta opción. - </VarListEntry> - - <VarListEntry><Term>CDROM</Term> - <ListItem><Para> - La subsección CDROM controla la herramienta &apt-cdrom;, por favor, mire - la documentación para más información sobre esta opción. - </VarListEntry> - </VariableList> - </RefSect1> - - <RefSect1><Title>El grupo Acquire</> - <para> - El grupo de opciones <literal/Acquire/ controla la descarga de paquetes y los - manejadores de URI. - <VariableList> - <VarListEntry><Term>Queue-Mode</Term> - <ListItem><Para> - Modo de cola; <literal/Queue-Mode/ puede ser <literal/host/ o - <literal/access/ que determina como paralelizar las conexiones salientes - de APT. <literal/host/ significa que se abrirá una conexión - por puesto de destino, <literal/access/ significa que será abierta una - conexión por cada tipo de URI. - </VarListEntry> - - <VarListEntry><Term>Retries</Term> - <ListItem><Para> - Número de reintentos. Si es distinto de cero APT volverá a intentar obtener - los ficheros fallidos el número de veces dado. - </VarListEntry> - - <VarListEntry><Term>Source-Symlinks</Term> - <ListItem><Para> - Usar enlaces simbólicos para los archivos fuente. Si es true los archivos - fuente se enlazarán a ser posible, en vez de copiarse. Por omisión es true. - </VarListEntry> - - <VarListEntry><Term>http</Term> - <ListItem><Para> - HTTP URIs; http::Proxy es el proxy http predeterminado a usar. Usa el - formato general <literal>http://[[usuario][:clave]@]puesto[:puerto]/</>. - También se puede especificar un proxy por cada puesto usando la forma - <literal/http::Proxy::<puesto>/ con la palabra especial <literal/DIRECT/ - queriendo decir que no se use proxy. La variable de entorno - <envar/http_proxy/ modifica todas las preferencias. - <para> - Para los proxies que cumplen con HTTP/1.1 se proporcionan tres opciones de - configuración. <literal/No-Cache/ dice al proxy que no use su caché bajo - ninguna circunstancia, <literal/Max-Age/ sólo se envía para los ficheros de - índice y le pide a la caché que refresque su copia si es más antigua que - un determinado número de segundos. Debian actualiza sus ficheros de índices - diariamente, debido a esto el valor predeterminado es 1 día. - <literal/No-Store/ especifica que la caché nunca deberá almacenar la - petición, sólo está habilitada para los ficheros de archivo. Puede ser - útil para prevenir que un proxy se contamine con ficheros .deb muy - grandes. Nota: Squid 2.0.2 no soporta ninguna de estas opciones. - <para> - La opción <literal/timeout/ establece el tiempo máximo de espera del - método, esto se aplica a todo, incluyendo el tiempo de espera para realizar - la conexión y para recibir datos. - <para> - Se proporciona una opción para controlar la profundidad de la tubería en - casos en que el servidor no cumpla con RFC o tenga fallos (como pasa con - Squid 2.0.2). - <literal/Acquire::http::Pipeline-Depth/ puede ser un valor entre 0 y 5 - indicando cuantas peticiones sin resolver puede envíar APT. DEBE - especificarse si el puesto remoto no demora apropiadamente las conexiones - TCP - de otro modo los datos se corromperán. Los puesto que necesiten esto - violan el RFC 2068. - </VarListEntry> - - <VarListEntry><Term>ftp</Term> - <ListItem><Para> - FTP URIs; ftp::Proxy es el servidor proxy a usar de forma - predeterminada. Se encuentra en el formato estándar - <literal>ftp://[[usuario][:clave]@]puesto[:puerto]/</> y se modifica mediante - la variable de entorno <envar/ftp_proxy/. Para usar un proxy ftp es - necesario establecer el script <literal/ftp::ProxyLogin/ en el fichero de - configuración. Esta entrada especifica órdenes que se mandan al servidor - proxy para decirle a donde debe conectarse. Consulte &configureindex; para - ver un ejemplo de como hacerlo. Las variables de substitución disponibles - son <literal/$(PROXY_USER)/, <literal/$(PROXY_PASS)/, - <literal/$(SITE_USER)/, <literal/$(SITE_PASS)/, <literal/$(SITE)/, y - <literal/$(SITE_PORT)/. Cada una se toma del componete de la URI - correspondiente. - <para> - La opción <literal/timeout/ establece el tiempo máximo de espera del - método, esto se aplica a todo, incluyendo el tiempo de espera para realizar - la conexión y para recibir datos. - <para> - Se proporcionan varias opciones para controlar el modo pasivo. Generalmente - es seguro dejar activado el modo pasivo, funciona en casi todos los - entornos. Sin embargo algunas situaciones requieren desactivar el modo - pasivo y usar el modo puerto e su lugar. Esto se puede hacer globalmente, - para conexiones a través de proxy o para un puesto específico (Consulte el - fichero de configuración de muestra para ver ejemplos). - <para> - Es posible usar proxy FTP a través de HTTP estableciendo la variable de - entorno <envar/ftp_proxy/ a una dirección http - mire la discusión del - método http de arriba para la sintaxis. No se puede habilitar en el fichero - de configuración y no se recomienda su uso debido a su poca eficiencia. - <para> - La opción <literal/ForceExtended/ controla el uso de las órdenes de RFC2428 - <literal/EPSV/ y <literal/EPRT/. Por omisión es false, que quiere decir que - sólo se usan si el control de conexión es IPv6. Poniéndolo a true fuerza su - uso incluso en conexiones IPv4. Dese cuenta que la mayoría de los - servidores FTP no soportan RFC2428. - </VarListEntry> - - <VarListEntry><Term>cdrom</Term> - <ListItem><Para> - CDROM URIs; la única opción de configuración para los CDROM es el punto de - montaje, <literal/cdrom::Mount/ debe ser el punto de montaje de la unidad - de CDROM tal y como se especifica en <filename>/etc/fstab</>. Es posible - proporcionar órdenes mount y unmount alternativas si el punto de montaje no - puede especificarse en fstab (como con SMB y versiones de mount - antiguas). Respecto a la sintaxis se pone <literallayout>"/cdrom/"::Mount - "tal";</literallayout> dentro del bloque cdrom. Es importante no tener una - barra final. Las órdenes de unmount pueden especificarse usando UMount. - </VarListEntry> - </VariableList> - </RefSect1> - - <RefSect1><Title>Directorios</> - <para> - La sección <literal/Dir::State/ contiene directorios que pertenecen a - información del estado local. <literal/lists/ es el directorio donde se - almacenan las listas de paquetes descargados y <literal/status/ es el nombre - del fichero de estado de dpkg. - <literal/preferences/ es el nombre del fichero de preferencias de APT. - <literal/Dir::State/ contiene el directorio que se usará como prefijo por - omisión en todas las opciones restantes en caso de que no empiezen con - <filename>/</> o <filename>./</>. - <para> - <literal/Dir::Cache/ contiene lugares pertenecientes a información de la - caché local, como las dos cachés de paquetes <literal/srcpkgcache/ y - <literal/pkgcache/ o como el lugar donde se guardan los ficheros descargados, - <literal/Dir::Cache::archives/. La generación de cachés puede desactivarse - dejando sus nombres en blanco. Ésto enlentecerá el arranque pero ahorrará - espacio. Normalmente se prefiere deshabilitar pkgcache en vez de - srcpkgcache. Al igual que con <literal/Dir::State/ el directorio - predeterminado está en <literal/Dir::Cache/ - <para> - <literal/Dir::Etc/ contiene el lugar de los ficheros de configuración, - <literal/sourcelist/ contiene el lugar de sourcelist y <literal/main/ es el - fichero de configuración predeterminado (esta opción de configuración no - tiene ningún efecto a menos que se realice desde el fichero de configuración - especificado por <envar/APT_CONFIG/). - <para> - La opción <literal/Dir::Parts/ lee en todos los fragementos de configuración - en orden léxico <!--¿Y esto qué es?--> desde el directorio - especificado. Después de esto se carga el fichero principal de configuración. - <para> - <literal/Dir::Bin/ apunta a los programas - binarios. <literal/Dir::Bin::Methods/ especifica la localización de los - manejadores de los métodos y <literal/gzip/, <literal/dpkg/, - <literal/apt-get/, <literal/dpkg-source/, <literal/dpkg-buildpackage/ y - <literal/apt-cache/ especifican la localización de los respectivos programas. - </RefSect1> - - <RefSect1><Title>APT con DSelect</> - <para> - Cuando APT se usa como método de &dselect; varias directivas de configuración - controlan el comportamiento predeterminado. Se encuentran en la sección - <literal/DSelect/. - - <VariableList> - <VarListEntry><Term>Clean</Term> - <ListItem><Para> - Modo de borrado de caché; este valor puede ser always, prompt, auto, - pre-auto y never. always y prompt borrarán todos los paquetes de la caché - después de actualizar, prompt (predeterminado) pregunta primero. - auto borra sólo aquellos paquetes que ya no se pueden descargar (han sido - reemplazados por otra versión, por ejemplo). pre-auto realiza esta última - acción antes de descargar los paquetes nuevos. - </VarListEntry> - - <VarListEntry><Term>Options</Term> - <ListItem><Para> - El contenido de esta variable se pasa a &apt-get; como opciones de línea de - ordenes cuando se ejecuta en la fase de instalación. - </VarListEntry> - - <VarListEntry><Term>UpdateOptions</Term> - <ListItem><Para> - El contenido de esta variable se pasa a &apt-get; como opciones de línea de - ordenes cuando se ejecuta en la fase de actualización. - </VarListEntry> - - <VarListEntry><Term>PromptAfterUpdate</Term> - <ListItem><Para> - Si es true la operación de [U]pdate en &dselect; preguntará siempre antes - de continuar. Por omisión sólo pregunta en caso de error. - </VarListEntry> - </VariableList> - </RefSect1> - - <RefSect1><Title>Como APT llama a dpkg</> - <para> - Varias directivas de configuración controlan como APT llama a &dpkg;. Se - encuentran en la sección <literal/DPkg/. - - <VariableList> - <VarListEntry><Term>Options</Term> - <ListItem><Para> - Lista de opciones que se pasan a dpkg. Las opciones deben especificarse - usando la notación de lista y cada elemento de la lista se pasa a &dpkg; - como un sólo argumento. - </VarListEntry> - - <VarListEntry><Term>Pre-Invoke</Term><Term>Post-Invoke</Term> - <ListItem><Para> - Es una lista de órdenes de shell que se ejecutarán antes de llamar a - &dpkg;. Como <literal/Options/, debe de especificarse con notación de - lista. Las órdenes se ejecutan en orden usando <filename>/bin/sh</>, si - alguna falla APT abortará. - </VarListEntry> - - <VarListEntry><Term>Pre-Install-Pkgs</Term> - <ListItem><Para> - Lista de órdenes de shell que se ejecutarán antes de llamar a - &dpkg;. Como <literal/Options/, debe de especificarse con notación de - lista. Las órdenes se ejecutan en orden usando <filename>/bin/sh</>, si - alguna falla APT abortará. APT pasará a los programas los nombres de - fichero de todos los .deb que va ha instalar por la entrada estándar, uno - por línea. - <para> - La versión 2 de este protocolo vuelca más información, incluyendo la - versión del protocolo, el espacio de configuración de APT <!--Esto suena - raro-->, los ficheros y versiones que cambian. La versión 2 se habilita - estableciendo <literal/DPkg::Tools::Options::cmd::Version/ a - 2. <literal/cmd/ es una orden dada a <literal/Pre-Install-Pkgs/. - </VarListEntry> - - <VarListEntry><Term>Run-Directory</Term> - <ListItem><Para> - APT hace que éste sea su directorio de trabajo antes de llamar a dpkg, por - omisión es <filename>/</>. - </VarListEntry> - - <VarListEntry><Term>Build-Options</Term> - <ListItem><Para> - Éstas opciones se pasan a &dpkg-buildpackage; cuando compila paquetes, - por omisión se limita a deshabilitar el firmado de paquetes y producir - todos los binarios. - </VarListEntry> - </VariableList> - </RefSect1> - - <RefSect1><Title>Opciones de depuración</> - <para> - La mayoría de las opciones de la sección <literal/debug/ no son interesantes - para el usuario normal, sin embargo <literal/Debug::pkgProblemResolver/ - muestra una salida interesante acerca de las decisiones que realiza - dist-upgrade. <literal/Debug::NoLocking/ deshabilita el bloqueo de fichero de - forma que APT puede realizar algunas operaciones sin permisos de superusuario - y <literal/Debug::pkgDPkgPM/ mostrará la línea de órdenes para cada llamada a - dpkg. <literal/Debug::IdentCdrom/ deshabilitará la inclusión de datos de - statfs <!--¿ésto es correcto-->en los ID's de los CDROM. - </RefSect1> - - <RefSect1><Title>Ejemplos</> - <para> - &configureindex; contiene un fichero de configuración de ejemplo mostrando - los valores predeterminados para todas las opciones posibles. - </RefSect1> - - <RefSect1><Title>Ficheros</> - <para> - <filename>/etc/apt/apt.conf</> - </RefSect1> - - <RefSect1><Title>Véase también</> - <para> - &apt-cache;, &apt-config;<!-- ? reading apt.conf -->, &apt-preferences;. - </RefSect1> - - &manbugs; - &manauthor; - - <refsect1> - <title>TRADUCTOR - - Traducción de Rubén Porras Campo - <debian-l10n-spanish@lists.debian.org> - - - - diff --git a/doc/es/apt.ent.es b/doc/es/apt.ent.es deleted file mode 100644 index cd9c7de46..000000000 --- a/doc/es/apt.ent.es +++ /dev/null @@ -1,155 +0,0 @@ - - - - - - -&docdir;examples/configure-index.gz"> -/etc/apt.conf"> - - - - - - - "> - - - - "> - - - - "> - - - - "> - - - - "> - - - - "> - - - - "> - - - - "> - - - - "> - - - - "> - - - - "> - - - - "> - - - - "> - - - - "> - - - -
apt@packages.debian.org
- Jason Gunthorpe - 1998-2001 Jason Gunthorpe - 12 March 2001 - -"> - - -Fallos</> - <para> - Vea la <ulink url='http://bugs.debian.org/src:apt'>página de fallos de APT</>. - Si desea avisar de un fallo en APT, vea - <filename>/usr/share/doc/debian/bug-reporting.txt</> o la orden &reportbug;. - </RefSect1> -"> - -<!-- Boiler plate Author section --> -<!ENTITY manauthor " - <RefSect1><Title>Autor</> - <para> - APT fue escrito por el equipo de APT <email>apt@packages.debian.org</>. - </RefSect1> -"> - -<!-- Should be used within the option section of the text to - put in the blurb about -h, -v, -c and -o --> -<!ENTITY apt-commonoptions " - <VarListEntry><term><option/-h/</><term><option/--help/</> - <ListItem><Para> - Muestra un breve resumen del modo de uso. - </VarListEntry> - - <VarListEntry><term><option/-v/</><term><option/--version/</> - <ListItem><Para> - Muestra la versión del programa. - </VarListEntry> - - <VarListEntry><term><option/-c/</><term><option/--config-file/</> - <ListItem><Para> - Especifica el fichero de configuración a usar. - El programa leerá el fichero de configuración por omisión y luego - este otro. Lea &apt-conf; para más información acerca de la sintaxis. - </VarListEntry> - - <VarListEntry><term><option/-o/</><term><option/--option/</> - <ListItem><Para> - Establece una opción de configuración. La sintaxis es <option>-o - Foo::Bar=bar</>. - </VarListEntry> -"> - -<!-- Should be used within the option section of the text to - put in the blurb about -h, -v, -c and -o --> -<!ENTITY apt-cmdblurb " - <para> - Todas las opciones de línea de órdenes pueden ser especificadas - mediante el fichero de configuración, en la descripción de cada opción - se indica la opción de configuración que hay que modificar. Para - opciones booleanas puedes modificar el fichero de configuración usando - cosas parecidas a <option/-f-/,<option/--no-f/, <option/-f=no/ y alguna que - otra variante. - </para> -"> diff --git a/doc/es/apt.es.8 b/doc/es/apt.es.8 deleted file mode 100644 index a98bf6dd2..000000000 --- a/doc/es/apt.es.8 +++ /dev/null @@ -1,55 +0,0 @@ -.\" This manpage is copyright (C) 1998 Branden Robinson <branden@debian.org>. -.\" This translation is copyright (C) 2003 The Spanish translation group -.\" <debian-l10n-spanish@lists.debian.org> -.\" -.\" This is free software; you may redistribute it and/or modify -.\" it under the terms of the GNU General Public License as -.\" published by the Free Software Foundation; either version 2, -.\" or (at your option) any later version. -.\" -.\" This is distributed in the hope that it will be useful, but -.\" WITHOUT ANY WARRANTY; without even the implied warranty of -.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -.\" GNU General Public License for more details. -.\" -.\" You should have received a copy of the GNU General Public -.\" License along with APT; if not, write to the Free Software -.\" Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA -.\" 02111-1307 USA -.TH apt 8 "16 Junio 1998" "Debian GNU/Linux" -.SH NOMBRE -apt \- Herramienta Avanzada de Paquetes -.SH SINOPSIS -.B apt -.SH DESCRIPCIÓN -APT es un sistema de gestión de paquetes de software. No hay aún interfaces -amigables para éste, ya que está aún en desarrollo. Consulte mientras -tanto, -.BR apt-get (8). -.SH OPCIONES -Ninguna. -.SH FICHEROS -Ninguno. -.SH LEA TAMBIEN -.BR apt-cache (8), -.BR apt-get (8), -.BR apt.conf (5), -.BR sources.list (5) -.SH DIAGNÓSTICO -apt devuelve cero cuando no ocurre ningún error. Si hay algún error -devuelve el valor 100. -.SH ERRATAS -Esta página de manual no está siquiera iniciada. -.PP -Consulte <http://bugs.debian.org/apt>. Si desea enviar un informe de error -en -.BR apt , -por favor lea -.I /usr/share/doc/debian/bug-reporting.txt -o el programa -.BR reportbug (1) -.SH AUTOR -El equipo APT <apt@packages.debian.org> escribió apt. -La traducción de esta página de manual fue iniciada por -Rudy Godoy <rudy@kernel-panik.org> y revisada posteriormente por -Ismael Fanlo, Rubén Porras y Javier Fernández-Sanguino. diff --git a/doc/es/apt_preferences.es.5.sgml b/doc/es/apt_preferences.es.5.sgml deleted file mode 100644 index 5506a450e..000000000 --- a/doc/es/apt_preferences.es.5.sgml +++ /dev/null @@ -1,587 +0,0 @@ -<!-- -*- mode: sgml; mode: fold -*- --> -<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V3.1//EN" [ - -<!ENTITY % aptent SYSTEM "apt.ent.es"> -%aptent; - -]> - -<!-- -(c) 2003 Software in the Public Interest -Esta traducción ha sido realizada por Rubén Porras Campo <nahoo@inicia.es> -y revisada por Javier Fernández-Sanguino <jfs@computer.org> -Está basada en la página de manual original: -versión 1.5 del CVS de -/cvs/debian-doc/manpages/english/apt/apt_preferences.5.sgml - --> - -<refentry lang=es> - &apt-docinfo; - - <refmeta> - <refentrytitle>apt_preferences</> - <manvolnum>5</> - </refmeta> - - <!-- Man page title --> - <refnamediv> - <refname>apt_preferences</> - <refpurpose>Fichero de preferencias de APT</> - </refnamediv> - -<RefSect1> -<Title>Descripción - -El fichero de preferencias de APT /etc/apt/preferences -se puede usar para controlar las versiones de los paquetes seleccionados. - - -Cuando el fichero &sources-list; contiene referencias a más de una -distribución (por ejemplo, estable y pruebas -). APT asigna una prioridad a cada versión disponible. -Limitado por las dependencias, apt-get selecciona la versión -con mayor prioridad. - - -El fichero de preferencias de APT modifica las prioridades asignadas por -APT, dando control al usuario sobre que ejemplar se seleccionará para la -instalación. - - -Puede estén disponibles varios ejemplares de la misma versión de un paquete -cuando el fichero &sources-list; contenga referencias a más de una fuente. En -este caso apt-get descarga el ejemplar que aparezca listado -primero en el fichero &sources-list;. El fichero de preferencias de APT no -modifica la elección del ejemplar, sólo la elección de la versión. - -¿Cómo asigna APT las prioridades?</> - -<para>Si no existe el fichero de preferencias o no hay ninguna entrada en éste -que se pueda aplicar a una determinada versión, se asigna a la versión la -prioridad de la distribución a la que pertenece. Es posible seleccionar una -distribución, >>distribución objetivo<< -(n. t. del inglés <emphasis>target release</emphasis>), que recibe -una prioridad mayor que el resto. La distribución objetivo se puede definir -en la línea de órdenes al ejecutar <command>apt-get</command> o en el fichero -de configuración de APT (<filename>/etc/apt/apt.conf</filename>). -Por ejemplo, -<programlisting> -<command>apt-get install -t testing <replaceable>paquete</replaceable></command> -</programlisting> -<programlisting> -APT::Default-Release "stable"; -</programlisting> -</para> - -<para> -Si se ha especificado una distribución objetivo, APT usa el siguiente -algoritmo para establecer las prioridades de cada versión de un paquete. -Asigna: - -<variablelist> -<varlistentry> -<term>prioridad 100</term> -<listitem><simpara>a la versión instalada (si existe).</simpara></listitem> -</varlistentry> -<varlistentry> -<term>prioridad 500</term> -<listitem><simpara>a la versión que ni está instalada ni pertenece a la -distribución objetivo.</simpara></listitem> -</varlistentry> -<varlistentry> -<term>prioridad 990</term> -<listitem><simpara>a las versiones que no están instaladas pero que -pertenecen a la distribución objetivo.</simpara></listitem> -</varlistentry> -</variablelist> -</para> - -<para> -Si no se especifica ninguna distribución objetivo APT asigna prioridad 100 a -todas las versiones de los paquetes instalados y 500 al resto. -</para> - -<para> -APT aplica las siguientes normas, expuestas por orden de precedencia, -para determinar qué versión del paquete debe instalar. - -<itemizedlist> -<listitem><simpara>Nunca instalar una versión anterior de un paquete en lugar -de la instalada a menos que la prioridad de la versión disponible supere 1000 -(Dese cuenta que ninguna de las prioridades que asigna APT por omisión superan -1000, éstas prioridades sólo se pueden establecer mediante el fichero de -preferencias. Tenga en consideración que instalar una versión anterior del -paquete puede ser peligroso). -</simpara></listitem> -<listitem><simpara>Instalar la versión de mayor prioridad. -</simpara></listitem> -<listitem><simpara>Si dos o más versiones tienen la misma prioridad, -instala la más reciente (esto es, la que tiene un número de versión mayor). -</simpara></listitem> -<listitem><simpara>Si dos o más versiones tienen la misma prioridad y número de -versión, pero o bien difieren en su meta-información o se ha proporcionado la -opción <literal/--reinstall/ se instala la que no está instalada. -</simpara></listitem> -</itemizedlist> -</para> - -<para> -Típicamente, la versión instalada del paquete (prioridad 100) -no es tan reciente como la disponible a través de &sources-list; -(prioridad 500 o 990). Entonces el paquete se actualizará cuando se ejecute -<command>apt-get install <replaceable>algún-paquete</replaceable></command> o -<command>apt-get upgrade</command>. -</para> - -<para>Rara vez la versión instalada de un paquete es <emphasis/más/ reciente -que cualquiera de las versiones disponibles. En éste caso no se instalará la -versión anterior del paquete cuando se ejecute <command>apt-get install -<replaceable>algún-paquete</replaceable></command> o <command>apt-get -upgrade</command>. -</para> - -<para> -A veces la versión instalada de un paquete es más reciente que la -versión perteneciente a la distribución objetivo, pero no tan reciente como la -versión de otra distribución. Este tipo de paquetes se actualizarán cuando se -ejecute <command>apt-get install -<replaceable>algún-paquete</replaceable></command> o <command>apt-get -upgrade</command> porque al menos <emphasis/uno/ de los ejemplares disponibles -tiene una prioridad mayor que la versión instalada. -</para> - -</RefSect2> - -<RefSect2><Title>El efecto de las preferencias sobre APT</> - -<para> -El fichero de preferencias de APT permite al administrador del sistema controlar -las asignaciones de prioridades. El fichero consiste en uno o más registros de -varias líneas separados entre sí por espacios en blanco. Los registros pueden -tener una o dos formas: una específica y otra general. -<itemizedlist> -<listitem> -<simpara> -La forma específica asigna una prioridad ("Pin-Priority") a un paquete -concreto y se aplica a una versión o rango de versiones. Por ejemplo, -el siguiente registro asigna una prioridad alta a todas las versiones del -paquete <filename/perl/ cuyo número de versión empiece con "<literal/5.8/". -</simpara> - -<programlisting> -Package: perl -Pin: version 5.8* -Pin-Priority: 1001 -</programlisting> -</listitem> - -<listitem><simpara> -La forma general asigna una prioridad a todas las versiones de los paquetes -en una distribución (esto es, a todas las versiones de paquetes provenientes -de un fichero <filename/Release/), o a todos las versiones de un paquete -que provienen de un sitio concreto en internet, identificado por su -nombre de dominio. -</simpara> - -<simpara> -Esta forma general del fichero de preferencias de APT sólo se aplica a grupos de -paquetes. Por ejemplo, el siguiente registro hace que asigne una prioridad alta -a todas las versiones disponibles desde un sitio local. -</simpara> - -<programlisting> -Package: * -Pin: origin "" -Pin-Priority: 999 -</programlisting> - -<simpara> -Un aviso acerca de la palabra clave usada en "<literal/origin/": no debe de -confundirse con el origen ("Origin:") de una distribución tal y como se -especifica en el fichero <filename/Release/. Lo que sigue a "Origin:" en un -fichero <filename/Release/ no es una dirección de un sitio de internet, sino el -autor o el nombre del proveedor, tales como "Debian" o "Ximian". -</simpara> - -<simpara> -El siguiente registro asigna una prioridad baja a todas las versiones de los -paquetes pertenecientes a cualquier distribución que tenga como nombre de -Archivo "<literal/unstable/". -</simpara> - -<programlisting> -Package: * -Pin: release a=unstable -Pin-Priority: 50 -</programlisting> - -<simpara> -El siguiente registro asigna una prioridad alta a todas las versiones de los -paquetes pertenecientes a la distribución que tiene como nombre de Archivo -"<literal/stable/" y como número de versión "<literal/3.0/". -</simpara> - -<programlisting> -Package: * -Pin: release a=unstable, v=3.0 -Pin-Priority: 50 -</programlisting> -</listitem> -</itemizedlist> -</para> - -</RefSect2> - -<RefSect2> -<Title>¿Cómo interpreta APT las prioridades? - - -Las prioridades (P) asignadas en el fichero de preferencias deben ser -números enteros. Se interpretan (en general) del siguiente modo: - - - -P > 1000 -la versión se instala incluso si es una versión -anterior a la instalada en el sistema. - -990 < P <=1000 -la versión se instala aunque no venga de la distribución -objetivo, a menos que la versión instalada sea más reciente. - - -500 < P <=990 -la versión se instala a menos que exista otro ejemplar -disponible perteneciente a la distribución objetivo o bien la versión -instalada sea más reciente. - -100 < P <=500 -la versión se instala a menos que exista un ejemplar -perteneciente a otra distribución o la versión instalada sea más reciente. - -0 < P <=100 -la versión sólo se instala si no hay ninguna versión -del paquete instalado. - -P < 0 -la versión nunca se instala. - - - - - - -Si uno de los registros de forma específica descritos arriba coinciden con una -versión disponible de un paquete, el registro determina la prioridad de la -versión. En caso de que esto no sea así, si cualquier número de registros de -forma general coinciden con una versión, el primero determina la prioridad de la -versión del paquete. - - - -Por ejemplo, suponga que el fichero de preferencias de APT -contiene los tres registros antes mencionados: - - -Package: perl -Pin: version 5.8* -Pin-Priority: 1001 - -Package: * -Pin: origin "" -Pin-Priority: 999 - -Package: * -Pin: release unstable -Pin-Priority: 50 - - -Entonces: - - -La versión más reciente disponible del paquete -Cualquier otra versión de un paquete -distinto de - -Otras versiones que tengan un origen distinto al sistema -local listadas en &sources-list; y que pertenezcan a la distribución - - - - - - -Determinación de la versión del paquete y de las propiedades de la -distribución - - -Los recursos del fichero &sources-list; deben proporcionar los ficheros -Packages y Release. Éstos describen -los paquetes disponibles en cada uno de los sitios. - - -El fichero Packages se encuentra normalmente en -el directorio .../dists/nombre-dist/ -componente/arquitectura -, -por ejemplo, .../dists/stable/main/binary-i386/Packages. -El fichero consiste en una serie de registros de varias líneas, uno por cada -paquete disponible en ese directorio. Para montar un repositorio de APT sólo -son significativas dos de las líneas de cada registro: - - -La línea -Indica el nombre del paquete - - -La línea -Indica el número de versión del paquete - - - - -El fichero Release normalmente se encuentra en el -directorio -.../dists/nombre-dist, -por ejemplo, .../dists/stable/Release, -o .../dists/woody/Release. -El fichero consiste en registros de una sola línea que se aplican a - - -La línea -Indica el nombre del archivo al que pertenecen todos los -paquetes del árbol de directorios. Por ejemplo, la línea -"Archive: stable" especifica que todos los paquetes en el árbol de -directorios por debajo del directorio raíz marcado en el fichero - - -Pin: release a=stable - - - - - -La línea -Indica la versión de la distribución. Por ejemplo, los -paquetes en árbol pueden pertenecer a la versión 3.0 de Debian GNU/Linux. Dese -cuenta de que - - -Pin: release v=3.0 -Pin: release a=stable, v=3.0 -Pin: release 3.0 - - - - - - -La línea -Indica la licencia asociada a los paquetes en el árbol -de directorios correspondiente al fichero - -Pin: release c=main - - - - - -La línea -Indica la procedencia de los paquetes en el árbol de -directorios del fichero - -Pin: release o=Debian - - - - - -La línea -nombra la etiqueta de los paquetes en los árboles de -directorios del fichero - -Pin: release l=Debian - - - - - - - -Todos los ficheros Packages y Release -que se obtienen de los recursos de &sources-list; se guardan en el directorio -/var/lib/apt/lists, o en el directorio definido por la -variable debian.lcs.mit.edu_debian_dists_unstable_contrib_binary-i386_Release - contiene los ficheros Release obtenidos de - - - - - -Líneas opcionales en un registro de preferencias de APT - - -Cada registro en el fichero de preferencias de APT puede comenzar -con una o más líneas que tengan como primera palabra - - - -La línea - - - - -Ejemplos - -Siguiendo la distribución estable - -El siguiente fichero de preferencias de APT provoca que APT asigne una -prioridad mayor de la que asigna por omisión (500) a todos los ejemplares de -la distribución -Explanation: Desinstalar o no instalar los ejemplares que no -Explanation: pertenecen a la distribución estable -Package: * -Pin: release a=stable -Pin-Priority: 900 - -Package: * -Pin: release o=Debian -Pin-Priority: -10 - - - - -Con un fichero &sources-list; apropiado y el fichero de preferencias mostrado -anteriormente, cualquiera de las siguientes órdenes de APT hace que o bien todo -el sistema o bien sólo algunos paquetes se actualicen a la última versión - -apt-get install paquete -apt-get upgrade -apt-get dist-upgrade - - - -La siguiente orden hace que APT actualice un paquete a la última versión -de la distribución de -apt-get install paquete/testing - - - - -Siguiendo la distribución de pruebas o inestable - -El siguiente fichero de preferencias de APT provocará que APT asigne -mayor prioridad a las versiones de la distribución de -Package: * -Pin: release a=testing -Pin-Priority: 900 - -Package: * -Pin: release a=unstable -Pin-Priority: 800 - -Package: * -Pin: release o=Debian -Pin-Priority: -10 - - - - -Con un fichero &sources-list; adecuado y el fichero de preferencias anterior, -cualquiera de la órdenes siguientes hace que APT actualice los paquetes a la -última versión de la distribución de -apt-get install paquete -apt-get upgrade -apt-get dist-upgrade - - - -La siguiente orden hace que APT actualice un determinado paquete a la -última versión de la distribución apt-get upgrade actualizarán el paquete a la última versión -de la distribución de -apt-get install paquete/unstable - - - - - - - -Véase además</> -<para> -&apt-get; &apt-cache; &apt-conf; &sources-list; -</para> - </RefSect1> - - &manbugs; - &manauthor; - - <refsect1> - <title>TRADUCTOR - - Traducción de Rubén Porras Campo - <debian-l10n-spanish@lists.debian.org> - - - - diff --git a/doc/es/sources.list.es.5.sgml b/doc/es/sources.list.es.5.sgml deleted file mode 100644 index 66e5c38fe..000000000 --- a/doc/es/sources.list.es.5.sgml +++ /dev/null @@ -1,225 +0,0 @@ - - -%aptent; - -]> - - - - &apt-docinfo; - - - sources.list - 5 - - - - - sources.list - lista de recursos de paquetes para APT - - - Descripción</> - - <para> - La lista de recursos de paquetes se usa para localizar ficheros del sistema - de distribución de paquetes usado en el sistema. - A día de hoy, esta página del manual documenta sólamente el sistema de - paquetes usado por Debian GNU/Linux. Este fichero de control está situado en - <filename>/etc/apt/sources.list</> - <para> - La lista de procedencias está diseñada para soportar cualquier número y - distintos tipos de procedencias. El fichero lista una procedencia por línea, - con la procedencia de mayor prioridad en la primera línea. - El formato de cada línea es: - <literal/tipo uri argumentos/. El primer elemento, <literal/tipo/, - determina el formato de <literal/argumentos/. - <literal/uri/ es Universal Resource Identifier (Identificador Universal de - Recursos), un caso general de la más especifica y bien conocida - Universal Resource Locator, o URL. - El resto de la línea puede marcarse como comentario usando #. - </RefSect1> - - <RefSect1><Title>Los tipos deb y deb-src</> - <para> - El tipo <literal/deb/ hace referencia a un típico archivo de Debian de dos - niveles, <filename>distribución/componente</>. Normalmente - <literal/distribución/ es <literal/stable/, <literal/testing/, o - <literal/unstable/, mientras que componente es <literal/main/, - <literal/contrib/, <literal/non-free/, o <literal/non-us/. El tipo - <literal/deb-src/ hace referencia al código fuente de la distribución con la - misma sintaxis que el tipo <literal/deb/. Es necesaria una línea - <literal/deb-src/ para descargar un índice de los paquetes que tienen - código fuente disponible. - <para> - El formato para una entrada en el fichero <filename/sources.list/ usando - los tipos <literal/deb/ y <literal/deb-src/ es: - <literallayout>deb uri distribución [componente1] [componente2] [...]</literallayout> - <para> - La URI para el tipo <literal/deb/ debe de especificar la base de - la distribución de Debian, donde APT encontrará la información que - necesita. - <literal/distribución/ puede especificar un ruta exacta, en cuyo caso se - deben omitir los componentes y <literal/distribución/ debe finalizar - con una barra (/). Esto es útil cuando únicamente queremos una sub-sección - del archivo denotado por la URI. Si <literal/distribución/ no especifica - la ruta exacta, al menos uno de los <literal/componentes/ debe de estar - presente. - <para> - <literal/distribución/ puede contener una variable, <literal/$(ARCH)/, - que se expandirá en la arquitectura de Debian usada en el sistema (i386, - m68k, powerpc, ...). Esto permite que <filename/sources.list/ sea - independiente de la arquitectura. En general esta característica sólo es - de interés cuando se especifica una ruta completa, de lo contrario - <literal/APT/ generará automáticamente la URI con la arquitectura actual - del sistema. - <para> - Debido a que sólo se puede especificar una distribución por línea es posible - que sea necesario tener múltiples líneas para la misma URI si deseamos - tener accesibles más de una distribución o componente de ese sitio. - APT ordenará internamente la lista de URI's después de haber generado - una copia interna, y juntará varias referencias al mismo servidor de Internet - en una sola conexión, para así no establecer una conexión FTP de forma - ineficiente, cerrarla, hacer algo más, y entonces restablecer la conexión - al mismo servidor. Esta característica es útil para acceder a FPT's concurridos - que limitan el número de accesos simultáneos de usuarios anónimos. APT - también paralelará conexiones a diferentes servidores para aprovechar mejor - el ancho de banda. - <para> - Es importante listar las fuente por orden de preferencia, con la fuente de más - preferencia al principio. Lo normal es ordenar las fuentes por velocidad, - de la más rápida a la más lenta (CD-ROM seguido de servidores en la red - local, seguidos por servidores de Internet distantes, por ejemplo). - <para> - Algunos ejemplos: - <literallayout> -deb http://http.us.debian.org/debian stable main contrib non-free -deb http://http.us.debian.org/debian dists/stable-updates/ - </literallayout> - </RefSect1> - - <RefSect1><title>especificación de la URI - - Se reconocen los siguientes tipos de URI: cdrom, file, http, y ftp. - - file - - file permite considerar como archivo a cualquier - fichero en el sistema de ficheros. Esto es útil para particiones - montadas mediante NFS y réplicas locales. - - - cdrom - - El cdrom permite a APT usar la unidad de CDROM local. Use el - programa &apt-cdrom; para añadir entradas de un cdrom a sources.list. - - - http - - Http especifica un servidor HTTP como archivo. Si la variable de entorno - - - ftp - - Ftp especifica un servidor FTP como archivo. El comportamiento de APT - con FTP es altamente configurable, para más información consulte la página - del manual de &apt-conf;. Dese cuenta que un proxy ftp puede ser - especificado usando la variable de entorno - - copy - - Copy es idéntico a file excepto en que los paquetes son copiados al - directorio que contiene la caché en vez de usar directamente su - lugar original. Esto es útil para gente que use discos zip con APT. - - - rshssh - - El método rsh/ssh usa rsh/ssh para conectar a los servidores remotos como - un usuario dado y acceder a los ficheros. No es posible realizar ninguna - autenticación por contraseña, debe hacerse previamente una configuración - de claves RSA o rhosts. - El acceso a los ficheros del sistema remoto usa las órdenes estándar - - - - - Ejemplos - - Usa el archivo local (o montado mediante NFS) en /home/jason/debian - para stable/main, stable/contrib, y stable/non-free. - deb file:/home/jason/debian stable main contrib non-free - - Como arriba, excepto que usa la distribución inestable. - deb file:/home/jason/debian unstable main contrib non-free - - Línea para el código fuente de lo mismo que arriba - deb-src file:/home/jason/debian unstable main contrib non-free - - Usa HTTP para acceder al archivo en archive.debian.org, y usa sólo la parte - de hamm/main. - deb http://archive.debian.org/debian-archive hamm main - - Usa FTP para acceder al archivo en ftp.debian.org, debajo del directorio - debian, y usa sólo la parte de stable/contrib. - deb ftp://ftp.debian.org/debian stable contrib - - Usa FTP para acceder al archivo en ftp.debian.org, debajo del directorio - debian, y usa sólo la parte de unstable/contrib. Si tanto esta línea como - la del ejemplo anterior aparecen en deb ftp://ftp.debian.org/debian unstable contrib - - Usa HTTP para acceder al archivo en nonus.debian.org, bajo el directorio - debian-non-US. - deb http://nonus.debian.org/debian-non-US stable/non-US main - contrib non-free - - Usa HTTP para acceder al archivo en nonus.debian.org, bajo el directorio - debian-non-US, y usa sólo ficheros que se encuentren debajo de - unstable/binary-i386 en máquinas i386, - unstable/binary-m68k en máquinas m68k, y así para todas las - arquitecturas soportadas. (Dese cuenta que este ejemplo sólo sirve para - ilustrar como se usa la variable de substitución, non-us ya no está - estructurado de este modo) - deb http://ftp.de.debian.org/debian-non-US - unstable/binary-$(ARCH)/ - - - Véase también</> - <para> - &apt-cache; &apt-conf; - </RefSect1> - - &manbugs; - &manauthor; - - <refsect1> - <title>TRADUCTOR - - Traducción de Rubén Porras Campo - <debian-l10n-spanish@lists.debian.org> - - - - diff --git a/doc/es/vendors.list.es.5.sgml b/doc/es/vendors.list.es.5.sgml deleted file mode 100644 index b8b329e79..000000000 --- a/doc/es/vendors.list.es.5.sgml +++ /dev/null @@ -1,120 +0,0 @@ - - -%aptent; - -]> - - - - - &apt-docinfo; - - - vendors.list - 5 - - - - - vendors.list - Configuración de claves de seguridad de APT - - - Descripción</> - <para> - La lista de proveedores de paquetes contiene una lista de todos los - proveedores cuyos paquetes descargados desee autenticar. - Debe de tener la huella digital PGP correspondiente a cada - proveedor, de este modo APT puede verificar la firma del fichero - <literal>Release</literal> y después la suma de control de cada - paquete descargado. Para habilitar la autenticación debe añadir - entre llaves el identificador del proveedor (vea más abajo) a cada - línea del fichero &sources-list; que replique el repositorio - proporcionado por ese proveedor. - <para> - El formato del fichero es parecido al que usa - <command>apt.conf</command>. Consiste de un número arbitrario de - bloques, donde cada bloque comienza con una cadena de caracteres - que indican el <replaceable/tipo_clave/ y el <replaceable/id_de_proveedor/. - <para> - Algunos proveedores pueden tener varios bloques definiendo - diferentes normas de seguridad para sus distribuciones. Debian, por - ejemplo, usa diferentes métodos para firmar las distintas distribuciones. - <para> - <replaceable/tipo_clave/ es el tipo de comprobación exigido. - Actualmente, sólo está disponible el tipo <literal/simple-key/. - <para> - <replaceable/id_de_proveedor/ es la cadena de carácteres que - identifica al proveedor. Es una cadena arbitraria y obligatoria que - debe proporcionar para identificar inequívocamente al proveedor - listado en este fichero. - - Ejemplo: -<informalexample><programlisting> -simple-key "juan" -{ - Fingerprint "0987AB4378FSD872343298787ACC"; - Name "Juan Gándara <juan@gandara.com>"; -} -</programlisting></informalexample> - - </RefSect1> - - <RefSect1><Title>El tipo simple-key</> - <para> - Este tipo de verificación se usa cuando el proveedor tiene una sola - clave asegurada que se debe usar para firmar el fichero <literal> - Release</literal>. Los siguiente elementos deben de estar presentes: - - <VariableList> - <VarListEntry><Term>Fingerprint</Term> - <ListItem><Para> - La huella digital PGP para la clave. La huella digital debe - expresarse con la notación estándar, con o sin espacios. - La opción <option/--fingerprint/ de la orden <CiteRefEntry><RefEntryTitle> - <command/gpg/</RefEntryTitle><ManVolNum/1/</CiteRefEntry> - mostrará la huella digital de la clave o claves seleccionadas. - </VarListEntry> - - <VarListEntry><Term>Name</Term> - <ListItem><Para> - Cadena de caracteres que contiene una descripción del propietario - de la clave o del proveedor. Puede poner el nombre del proveedor - y su <foreignphrase>email</foreignphrase>. La cadena debe de ir - entre comillas dobles. - </VarListEntry> - - </VariableList> - </RefSect1> - - <RefSect1><Title>Ficheros</> - <para> - <filename>/etc/apt/vendors.list</> - </RefSect1> - - <RefSect1><Title>Véase también</> - <para> - &sources-list; - </RefSect1> - - &manbugs; - &manauthor; - - <refsect1> - <title>TRADUCTOR - - Traducción de Rubén Porras Campo - <debian-l10n-spanish@lists.debian.org> - - - - - diff --git a/doc/po/es.po b/doc/po/es.po new file mode 100644 index 000000000..271998320 --- /dev/null +++ b/doc/po/es.po @@ -0,0 +1,10101 @@ +# Translation of apt package man pages +# Copyright (C) 2003, 2004 Debian Italian l10n team +# This file is distributed under the same license as the apt package. +# +# Translators: +# Ismael Fanlo, 2003 +# Carlos Mestre, 2003 +# Rudy Godoy , 2003 +# Gustavo Saldumbide , 2003 +# Javier Fernández-Sanguino , 2003 +# Rubén Porras Campo , 2003, 2004 +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: apt\n" +"POT-Creation-Date: 2009-11-01 00:19+0100\n" +"PO-Revision-Date: 2004-09-20 17:05+0000\n" +"Last-Translator: Rubén Porras Campo \n" +"Language-Team: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. type: TH +#: apt.8:17 +#, fuzzy, no-wrap +msgid "apt" +msgstr "B" + +#. type: TH +#: apt.8:17 +#, fuzzy, no-wrap +msgid "16 June 1998" +msgstr "16 Junio 1998" + +#. type: TH +#: apt.8:17 +#, fuzzy, no-wrap +msgid "Debian GNU/Linux" +msgstr "Debian GNU/Linux" + +#. type: SH +#: apt.8:18 +#, fuzzy, no-wrap +msgid "NAME" +msgstr "NOMBRE" + +#. type: Plain text +#: apt.8:20 +#, fuzzy +msgid "apt - Advanced Package Tool" +msgstr "apt - Herramienta Avanzada de Paquetes" + +#. type: SH +#: apt.8:20 +#, fuzzy, no-wrap +msgid "SYNOPSIS" +msgstr "SINOPSIS" + +#. type: Plain text +#: apt.8:22 +#, fuzzy +msgid "B" +msgstr "B" + +#. type: SH +#: apt.8:22 +#, fuzzy, no-wrap +msgid "DESCRIPTION" +msgstr "DESCRIPCIÓN" + +#. type: Plain text +#: apt.8:31 +msgid "" +"APT is a management system for software packages. For normal day to day " +"package management there are several frontends available, such as B" +"(8) for the command line or B(8) for the X Window System. Some " +"options are only implemented in B(8) though." +msgstr "" + +#. type: SH +#: apt.8:31 +#, fuzzy, no-wrap +msgid "OPTIONS" +msgstr "OPCIONES" + +#. type: Plain text +#: apt.8:33 apt.8:35 +#, fuzzy +msgid "None." +msgstr "" +"#-#-#-#-# apt.es.8:31 #-#-#-#-#\n" +"Ninguna.\n" +"#-#-#-#-# apt.es.8:33 #-#-#-#-#\n" +"Ninguno." + +#. type: SH +#: apt.8:33 +#, fuzzy, no-wrap +msgid "FILES" +msgstr "FICHEROS" + +#. type: SH +#: apt.8:35 +#, fuzzy, no-wrap +msgid "SEE ALSO" +msgstr "LEA TAMBIEN" + +#. type: Plain text +#: apt.8:42 +#, fuzzy +msgid "" +"B(8), B(8), B(5), B(5), " +"B(5), B(8)" +msgstr "B(8), B(8), B(5), B(5)" + +#. type: SH +#: apt.8:42 +#, fuzzy, no-wrap +msgid "DIAGNOSTICS" +msgstr "DIAGNÓSTICO" + +#. type: Plain text +#: apt.8:44 +#, fuzzy +msgid "apt returns zero on normal operation, decimal 100 on error." +msgstr "" +"apt devuelve cero cuando no ocurre ningún error. Si hay algún error devuelve " +"el valor 100." + +#. type: SH +#: apt.8:44 +#, fuzzy, no-wrap +msgid "BUGS" +msgstr "ERRATAS" + +#. type: Plain text +#: apt.8:46 +#, fuzzy +msgid "This manpage isn't even started." +msgstr "Esta página de manual no está siquiera iniciada." + +#. type: Plain text +#: apt.8:55 +#, fuzzy +msgid "" +"See Ehttp://bugs.debian.org/aptE. If you wish to report a bug in " +"B, please see I or the " +"B(1) command." +msgstr "" +"Consulte Ehttp://bugs.debian.org/aptE. Si desea enviar un informe de " +"error en B, por favor lea I o " +"el programa B(1)" + +#. type: SH +#: apt.8:55 +#, fuzzy, no-wrap +msgid "AUTHOR" +msgstr "AUTOR" + +#. type: Plain text +#: apt.8:56 +#, fuzzy +msgid "apt was written by the APT team Eapt@packages.debian.orgE." +msgstr "El equipo APT Eapt@packages.debian.orgE escribió apt." + +#. type: Plain text +#: apt.ent:2 +msgid "" +msgstr "" + +#. type: Plain text +#: apt.ent:10 +msgid "" +" &docdir;examples/configure-index.gz\"> /etc/apt.conf\"> " +msgstr "" + +#. type: Plain text +#: apt.ent:17 +#, no-wrap +msgid "" +"\n" +"\n" +" apt.conf\n" +" 5\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:23 +#, no-wrap +msgid "" +"\n" +" apt-get\n" +" 8\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:29 +#, no-wrap +msgid "" +"\n" +" apt-config\n" +" 8\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:35 +#, no-wrap +msgid "" +"\n" +" apt-cdrom\n" +" 8\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:41 +#, no-wrap +msgid "" +"\n" +" apt-cache\n" +" 8\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:47 +#, no-wrap +msgid "" +"\n" +" apt_preferences\n" +" 5\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:53 +#, no-wrap +msgid "" +"\n" +" apt-key\n" +" 8\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:59 +#, no-wrap +msgid "" +"\n" +" apt-secure\n" +" 8\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:65 +#, no-wrap +msgid "" +"\n" +" apt-ftparchive\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:72 +#, no-wrap +msgid "" +"\n" +" sources.list\n" +" 5\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:78 +#, no-wrap +msgid "" +"\n" +" reportbug\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:84 +#, no-wrap +msgid "" +"\n" +" dpkg\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:90 +#, no-wrap +msgid "" +"\n" +" dpkg-buildpackage\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:96 +#, no-wrap +msgid "" +"\n" +" gzip\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:102 +#, no-wrap +msgid "" +"\n" +" dpkg-scanpackages\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:108 +#, no-wrap +msgid "" +"\n" +" dpkg-scansources\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:114 +#, no-wrap +msgid "" +"\n" +" dselect\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:120 +#, no-wrap +msgid "" +"\n" +" aptitude\n" +" 8\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:126 +#, no-wrap +msgid "" +"\n" +" synaptic\n" +" 8\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:132 +#, no-wrap +msgid "" +"\n" +" debsign\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:138 +#, no-wrap +msgid "" +"\n" +" debsig-verify\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:144 +#, no-wrap +msgid "" +"\n" +" gpg\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:150 +#, no-wrap +msgid "" +"\n" +" gnome-apt\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:156 +#, no-wrap +msgid "" +"\n" +" wajig\n" +" 1\n" +" \"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:168 +#, fuzzy, no-wrap +msgid "" +"\n" +"\n" +"
apt@packages.debian.org
\n" +" \n" +" Jason Gunthorpe\n" +" \n" +" \n" +" 1998-2001 Jason Gunthorpe\n" +" 28 October 2008\n" +" Linux\n" +msgstr "" +"\n" +" \n" +"
apt@packages.debian.org
\n" +" Jason Gunthorpe\n" +" 1998-2001 Jason Gunthorpe\n" +" 12 March 2001\n" +" \n" + +#. type: Plain text +#: apt.ent:171 +#, no-wrap +msgid "" +" \n" +"\"> \n" +msgstr "" + +#. type: Plain text +#: apt.ent:177 +#, no-wrap +msgid "" +"\n" +" apt@packages.debian.org\n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:185 +#, no-wrap +msgid "" +"\n" +" Jason\n" +" Gunthorpe\n" +" \n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:193 +#, no-wrap +msgid "" +"\n" +" Mike\n" +" O'Connor\n" +" \n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:200 +#, no-wrap +msgid "" +"\n" +" APT team\n" +" \n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:204 apt.ent:215 +#, no-wrap +msgid "" +"Linux\n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:211 +#, no-wrap +msgid "" +"\n" +" Jason Gunthorpe\n" +" 1998-2001\n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:221 +#, no-wrap +msgid "" +"\n" +"\t\tQA Page\n" +"\t\n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:232 +#, fuzzy, no-wrap +msgid "" +"\n" +"Bugs\n" +" APT bug page. \n" +" If you wish to report a bug in APT, please see\n" +" /usr/share/doc/debian/bug-reporting.txt or the\n" +" &reportbug; command.\n" +" \n" +" \n" +"\">\n" +msgstr "Consulte Ehttp://bugs.debian.org/aptE. Si desea enviar un informe de error en B, por favor lea I o el programa B(1)" + +#. type: Plain text +#: apt.ent:240 +#, fuzzy, no-wrap +msgid "" +"\n" +"Author\n" +" APT was written by the APT team apt@packages.debian.org.\n" +" \n" +" \n" +"\">\n" +msgstr "El equipo APT Eapt@packages.debian.orgE escribió apt." + +#. type: Plain text +#: apt.ent:250 +#, no-wrap +msgid "" +"\n" +"\n" +" \n" +" Show a short usage summary.\n" +" \n" +" \n" +" \n" +msgstr "" + +#. type: Plain text +#: apt.ent:258 +#, no-wrap +msgid "" +" \n" +" \n" +" \n" +" Show the program version.\n" +" \n" +" \n" +" \n" +msgstr "" + +#. type: Plain text +#: apt.ent:268 +#, no-wrap +msgid "" +" \n" +" \n" +" \n" +" Configuration File; Specify a configuration file to use. \n" +" The program will read the default configuration file and then this \n" +" configuration file. See &apt-conf; for syntax information. \n" +" \n" +" \n" +" \n" +msgstr "" + +#. type: Plain text +#: apt.ent:280 +#, no-wrap +msgid "" +" \n" +" \n" +" \n" +" Set a Configuration Option; This will set an arbitrary\n" +" configuration option. The syntax is .\n" +" and can be used multiple\n" +" times to set different options.\n" +" \n" +" \n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:291 +#, fuzzy, no-wrap +msgid "" +"\n" +"All command line options may be set using the configuration file, the\n" +" descriptions indicate the configuration option to set. For boolean\n" +" options you can override the config file by using something like \n" +" ,, \n" +" or several other variations.\n" +" \n" +"\">\n" +msgstr "" +"\n" +" \n" +" Todas las opciones de línea de órdenes pueden ser especificadas\n" +" mediante el fichero de configuración, en la descripción de cada opción\n" +" se indica la opción de configuración que hay que modificar. Para\n" +" opciones booleanas puedes modificar el fichero de configuración usando\n" +" cosas parecidas a \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:232 +#, no-wrap +msgid "" +"\n" +"Bugs\n" +" APT bug page. \n" +" If you wish to report a bug in APT, please see\n" +" /usr/share/doc/debian/bug-reporting.txt or the\n" +" &reportbug; command.\n" +" \n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:240 +#, no-wrap +msgid "" +"\n" +"Author\n" +" APT was written by the APT team apt@packages.debian.org.\n" +" \n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:250 +#, no-wrap +msgid "" +"\n" +"\n" +" \n" +" Show a short usage summary.\n" +" \n" +" \n" +" \n" +msgstr "" + +#. type: Plain text +#: apt.ent:258 +#, no-wrap +msgid "" +" \n" +" \n" +" \n" +" Show the program version.\n" +" \n" +" \n" +" \n" +msgstr "" + +#. type: Plain text +#: apt.ent:268 +#, no-wrap +msgid "" +" \n" +" \n" +" \n" +" Configuration File; Specify a configuration file to use. \n" +" The program will read the default configuration file and then this \n" +" configuration file. See &apt-conf; for syntax information. \n" +" \n" +" \n" +" \n" +msgstr "" + +#. type: Plain text +#: apt.ent:280 +#, no-wrap +msgid "" +" \n" +" \n" +" \n" +" Set a Configuration Option; This will set an arbitrary\n" +" configuration option. The syntax is .\n" +" and can be used multiple\n" +" times to set different options.\n" +" \n" +" \n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:291 +#, no-wrap +msgid "" +"\n" +"All command line options may be set using the configuration file, the\n" +" descriptions indicate the configuration option to set. For boolean\n" +" options you can override the config file by using something like \n" +" ,, \n" +" or several other variations.\n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:297 +#, no-wrap +msgid "" +"/etc/apt/apt.conf\n" +" APT configuration file.\n" +" Configuration Item: Dir::Etc::Main.\n" +" \n" +msgstr "" + +#. type: Plain text +#: apt.ent:303 +#, no-wrap +msgid "" +" /etc/apt/apt.conf.d/\n" +" APT configuration file fragments.\n" +" Configuration Item: Dir::Etc::Parts.\n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:309 +#, no-wrap +msgid "" +"&cachedir;/archives/\n" +" Storage area for retrieved package files.\n" +" Configuration Item: Dir::Cache::Archives.\n" +" \n" +msgstr "" + +#. type: Plain text +#: apt.ent:315 +#, no-wrap +msgid "" +" &cachedir;/archives/partial/\n" +" Storage area for package files in transit.\n" +" Configuration Item: Dir::Cache::Archives (implicit partial). \n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:325 +#, no-wrap +msgid "" +"/etc/apt/preferences\n" +" Version preferences file.\n" +" This is where you would specify "pinning",\n" +" i.e. a preference to get certain packages\n" +" from a separate source\n" +" or from a different version of a distribution.\n" +" Configuration Item: Dir::Etc::Preferences.\n" +" \n" +msgstr "" + +#. type: Plain text +#: apt.ent:331 +#, no-wrap +msgid "" +" /etc/apt/preferences.d/\n" +" File fragments for the version preferences.\n" +" Configuration Item: Dir::Etc::PreferencesParts.\n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:337 +#, no-wrap +msgid "" +"/etc/apt/sources.list\n" +" Locations to fetch packages from.\n" +" Configuration Item: Dir::Etc::SourceList.\n" +" \n" +msgstr "" + +#. type: Plain text +#: apt.ent:343 +#, no-wrap +msgid "" +" /etc/apt/sources.list.d/\n" +" File fragments for locations to fetch packages from.\n" +" Configuration Item: Dir::Etc::SourceParts.\n" +" \n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:350 +#, no-wrap +msgid "" +"&statedir;/lists/\n" +" Storage area for state information for each package resource specified in\n" +" &sources-list;\n" +" Configuration Item: Dir::State::Lists.\n" +" \n" +msgstr "" + +#. type: Plain text +#: apt.ent:355 +#, no-wrap +msgid "" +" &statedir;/lists/partial/\n" +" Storage area for state information in transit.\n" +" Configuration Item: Dir::State::Lists (implicit partial).\n" +" \n" +"\">\n" +msgstr "" + +#. The last update date +#. type: Content of: +#: apt-cache.8.xml:13 apt-config.8.xml:13 apt-extracttemplates.1.xml:13 +#: apt-ftparchive.1.xml:13 apt-sortpkgs.1.xml:13 sources.list.5.xml:13 +msgid "" +"&apt-author.jgunthorpe; &apt-author.team; &apt-email; &apt-product; 29 " +"February 2004" +msgstr "" + +#. type: Content of: +#: apt-cache.8.xml:22 apt-cache.8.xml:29 +msgid "apt-cache" +msgstr "" + +#. type: Content of: +#: apt-cache.8.xml:23 apt-cdrom.8.xml:22 apt-config.8.xml:23 apt-get.8.xml:23 +#: apt-key.8.xml:15 apt-mark.8.xml:23 apt-secure.8.xml:15 +msgid "8" +msgstr "" + +#. type: Content of: +#: apt-cache.8.xml:24 apt-cdrom.8.xml:23 apt-config.8.xml:24 +#: apt-extracttemplates.1.xml:24 apt-ftparchive.1.xml:24 apt-get.8.xml:24 +#: apt-key.8.xml:16 apt-mark.8.xml:24 apt-secure.8.xml:16 +#: apt-sortpkgs.1.xml:24 apt.conf.5.xml:30 apt_preferences.5.xml:23 +#: sources.list.5.xml:24 +msgid "APT" +msgstr "" + +#. type: Content of: +#: apt-cache.8.xml:30 +msgid "APT package handling utility -- cache manipulator" +msgstr "" + +#. type: Content of: +#: apt-cache.8.xml:36 +msgid "" +"apt-cache " +"add file gencaches showpkg pkg " +"showsrc pkg stats dump dumpavail unmet search regex show pkg depends pkg " +"rdepends pkg pkgnames prefix dotty pkg " +"xvcg pkg policy pkgs madison pkgs " +msgstr "" + +#. type: Content of: +#: apt-cache.8.xml:62 apt-cdrom.8.xml:47 apt-config.8.xml:47 +#: apt-extracttemplates.1.xml:43 apt-ftparchive.1.xml:55 apt-get.8.xml:125 +#: apt-key.8.xml:34 apt-mark.8.xml:52 apt-secure.8.xml:40 +#: apt-sortpkgs.1.xml:44 apt.conf.5.xml:39 apt_preferences.5.xml:33 +#: sources.list.5.xml:33 +#, fuzzy +msgid "Description" +msgstr "Kolejne kroki" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cache.8.xml:63 +msgid "" +"<command>apt-cache</command> performs a variety of operations on APT's " +"package cache. <command>apt-cache</command> does not manipulate the state of " +"the system but does provide operations to search and generate interesting " +"output from the package metadata." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cache.8.xml:68 apt-get.8.xml:131 +msgid "" +"Unless the <option>-h</option>, or <option>--help</option> option is given, " +"one of the commands below must be present." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:72 +msgid "add <replaceable>file(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:73 +msgid "" +"<literal>add</literal> adds the named package index files to the package " +"cache. This is for debugging only." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:77 +msgid "gencaches" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:78 +msgid "" +"<literal>gencaches</literal> performs the same operation as <command>apt-get " +"check</command>. It builds the source and package caches from the sources in " +"&sources-list; and from <filename>/var/lib/dpkg/status</filename>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:84 +msgid "showpkg <replaceable>pkg(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:85 +msgid "" +"<literal>showpkg</literal> displays information about the packages listed on " +"the command line. Remaining arguments are package names. The available " +"versions and reverse dependencies of each package listed are listed, as well " +"as forward dependencies for each version. Forward (normal) dependencies are " +"those packages upon which the package in question depends; reverse " +"dependencies are those packages that depend upon the package in question. " +"Thus, forward dependencies must be satisfied for a package, but reverse " +"dependencies need not be. For instance, <command>apt-cache showpkg " +"libreadline2</command> would produce output similar to the following:" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><informalexample><programlisting> +#: apt-cache.8.xml:97 +#, no-wrap +msgid "" +"Package: libreadline2\n" +"Versions: 2.1-12(/var/state/apt/lists/foo_Packages),\n" +"Reverse Depends: \n" +" libreadlineg2,libreadline2\n" +" libreadline2-altdev,libreadline2\n" +"Dependencies:\n" +"2.1-12 - libc5 (2 5.4.0-0) ncurses3.0 (0 (null))\n" +"Provides:\n" +"2.1-12 - \n" +"Reverse Provides: \n" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:109 +msgid "" +"Thus it may be seen that libreadline2, version 2.1-12, depends on libc5 and " +"ncurses3.0 which must be installed for libreadline2 to work. In turn, " +"libreadlineg2 and libreadline2-altdev depend on libreadline2. If " +"libreadline2 is installed, libc5 and ncurses3.0 (and ldso) must also be " +"installed; libreadlineg2 and libreadline2-altdev do not have to be " +"installed. For the specific meaning of the remainder of the output it is " +"best to consult the apt source code." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:118 +msgid "stats" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:118 +msgid "" +"<literal>stats</literal> displays some statistics about the cache. No " +"further arguments are expected. Statistics reported are:" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:121 +msgid "" +"<literal>Total package names</literal> is the number of package names found " +"in the cache." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:125 +msgid "" +"<literal>Normal packages</literal> is the number of regular, ordinary " +"package names; these are packages that bear a one-to-one correspondence " +"between their names and the names used by other packages for them in " +"dependencies. The majority of packages fall into this category." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:131 +msgid "" +"<literal>Pure virtual packages</literal> is the number of packages that " +"exist only as a virtual package name; that is, packages only \"provide\" the " +"virtual package name, and no package actually uses the name. For instance, " +"\"mail-transport-agent\" in the Debian GNU/Linux system is a pure virtual " +"package; several packages provide \"mail-transport-agent\", but there is no " +"package named \"mail-transport-agent\"." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:139 +msgid "" +"<literal>Single virtual packages</literal> is the number of packages with " +"only one package providing a particular virtual package. For example, in the " +"Debian GNU/Linux system, \"X11-text-viewer\" is a virtual package, but only " +"one package, xless, provides \"X11-text-viewer\"." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:145 +msgid "" +"<literal>Mixed virtual packages</literal> is the number of packages that " +"either provide a particular virtual package or have the virtual package name " +"as the package name. For instance, in the Debian GNU/Linux system, \"debconf" +"\" is both an actual package, and provided by the debconf-tiny package." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:152 +msgid "" +"<literal>Missing</literal> is the number of package names that were " +"referenced in a dependency but were not provided by any package. Missing " +"packages may be an evidence if a full distribution is not accessed, or if a " +"package (real or virtual) has been dropped from the distribution. Usually " +"they are referenced from Conflicts or Breaks statements." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:159 +msgid "" +"<literal>Total distinct</literal> versions is the number of package versions " +"found in the cache; this value is therefore at least equal to the number of " +"total package names. If more than one distribution (both \"stable\" and " +"\"unstable\", for instance), is being accessed, this value can be " +"considerably larger than the number of total package names." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:166 +msgid "" +"<literal>Total dependencies</literal> is the number of dependency " +"relationships claimed by all of the packages in the cache." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:173 +msgid "showsrc <replaceable>pkg(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:174 +msgid "" +"<literal>showsrc</literal> displays all the source package records that " +"match the given package names. All versions are shown, as well as all " +"records that declare the name to be a Binary." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:179 apt-config.8.xml:84 +msgid "dump" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:180 +msgid "" +"<literal>dump</literal> shows a short listing of every package in the cache. " +"It is primarily for debugging." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:184 +msgid "dumpavail" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:185 +msgid "" +"<literal>dumpavail</literal> prints out an available list to stdout. This is " +"suitable for use with &dpkg; and is used by the &dselect; method." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:189 +msgid "unmet" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:190 +msgid "" +"<literal>unmet</literal> displays a summary of all unmet dependencies in the " +"package cache." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:194 +msgid "show <replaceable>pkg(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:195 +msgid "" +"<literal>show</literal> performs a function similar to <command>dpkg --print-" +"avail</command>; it displays the package records for the named packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:200 +msgid "search <replaceable>regex [ regex ... ]</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:201 +msgid "" +"<literal>search</literal> performs a full text search on all available " +"package lists for the POSIX regex pattern given, see " +"<citerefentry><refentrytitle><command>regex</command></refentrytitle> " +"<manvolnum>7</manvolnum></citerefentry>. It searches the package names and " +"the descriptions for an occurrence of the regular expression and prints out " +"the package name and the short description, including virtual package " +"names. If <option>--full</option> is given then output identical to " +"<literal>show</literal> is produced for each matched package, and if " +"<option>--names-only</option> is given then the long description is not " +"searched, only the package name is." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:214 +msgid "" +"Separate arguments can be used to specify multiple search patterns that are " +"and'ed together." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:218 +msgid "depends <replaceable>pkg(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:219 +msgid "" +"<literal>depends</literal> shows a listing of each dependency a package has " +"and all the possible other packages that can fulfill that dependency." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:223 +msgid "rdepends <replaceable>pkg(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:224 +msgid "" +"<literal>rdepends</literal> shows a listing of each reverse dependency a " +"package has." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:228 +msgid "pkgnames <replaceable>[ prefix ]</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:229 +msgid "" +"This command prints the name of each package APT knows. The optional " +"argument is a prefix match to filter the name list. The output is suitable " +"for use in a shell tab complete function and the output is generated " +"extremely quickly. This command is best used with the <option>--generate</" +"option> option." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:234 +msgid "" +"Note that a package which APT knows of is not necessarily available to " +"download, installable or installed, e.g. virtual packages are also listed in " +"the generated list." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:239 +msgid "dotty <replaceable>pkg(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:240 +msgid "" +"<literal>dotty</literal> takes a list of packages on the command line and " +"generates output suitable for use by dotty from the <ulink url=\"http://www." +"research.att.com/sw/tools/graphviz/\">GraphViz</ulink> package. The result " +"will be a set of nodes and edges representing the relationships between the " +"packages. By default the given packages will trace out all dependent " +"packages; this can produce a very large graph. To limit the output to only " +"the packages listed on the command line, set the <literal>APT::Cache::" +"GivenOnly</literal> option." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:249 +msgid "" +"The resulting nodes will have several shapes; normal packages are boxes, " +"pure provides are triangles, mixed provides are diamonds, missing packages " +"are hexagons. Orange boxes mean recursion was stopped [leaf packages], blue " +"lines are pre-depends, green lines are conflicts." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:254 +msgid "Caution, dotty cannot graph larger sets of packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:257 +msgid "xvcg <replaceable>pkg(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:258 +msgid "" +"The same as <literal>dotty</literal>, only for xvcg from the <ulink url=" +"\"http://rw4.cs.uni-sb.de/users/sander/html/gsvcg1.html\">VCG tool</ulink>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:262 +msgid "policy <replaceable>[ pkg(s) ]</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:263 +msgid "" +"<literal>policy</literal> is meant to help debug issues relating to the " +"preferences file. With no arguments it will print out the priorities of each " +"source. Otherwise it prints out detailed information about the priority " +"selection of the named package." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:269 +msgid "madison <replaceable>/[ pkg(s) ]</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:270 +msgid "" +"<literal>apt-cache</literal>'s <literal>madison</literal> command attempts " +"to mimic the output format and a subset of the functionality of the Debian " +"archive management tool, <literal>madison</literal>. It displays available " +"versions of a package in a tabular format. Unlike the original " +"<literal>madison</literal>, it can only display information for the " +"architecture for which APT has retrieved package lists (<literal>APT::" +"Architecture</literal>)." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:281 apt-config.8.xml:93 apt-extracttemplates.1.xml:56 +#: apt-ftparchive.1.xml:492 apt-get.8.xml:319 apt-mark.8.xml:89 +#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:456 apt.conf.5.xml:478 +#, fuzzy +msgid "options" +msgstr "Kolejne kroki" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:285 +msgid "<option>-p</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:285 +msgid "<option>--pkg-cache</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:286 +msgid "" +"Select the file to store the package cache. The package cache is the primary " +"cache used by all operations. Configuration Item: <literal>Dir::Cache::" +"pkgcache</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:291 apt-ftparchive.1.xml:535 apt-get.8.xml:376 +#: apt-sortpkgs.1.xml:58 +msgid "<option>-s</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:291 +msgid "<option>--src-cache</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:292 +msgid "" +"Select the file to store the source cache. The source is used only by " +"<literal>gencaches</literal> and it stores a parsed version of the package " +"information from remote sources. When building the package cache the source " +"cache is used to avoid reparsing all of the package files. Configuration " +"Item: <literal>Dir::Cache::srcpkgcache</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:299 apt-ftparchive.1.xml:509 apt-get.8.xml:366 +msgid "<option>-q</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:299 apt-ftparchive.1.xml:509 apt-get.8.xml:366 +msgid "<option>--quiet</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:300 +msgid "" +"Quiet; produces output suitable for logging, omitting progress indicators. " +"More q's will produce more quietness up to a maximum of 2. You can also use " +"<option>-q=#</option> to set the quietness level, overriding the " +"configuration file. Configuration Item: <literal>quiet</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:306 +msgid "<option>-i</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:306 +msgid "<option>--important</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:307 +msgid "" +"Print only important dependencies; for use with unmet and depends. Causes " +"only Depends and Pre-Depends relations to be printed. Configuration Item: " +"<literal>APT::Cache::Important</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:312 apt-cdrom.8.xml:121 apt-get.8.xml:333 +msgid "<option>-f</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:312 +msgid "<option>--full</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:313 +msgid "" +"Print full package records when searching. Configuration Item: " +"<literal>APT::Cache::ShowFull</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:317 apt-cdrom.8.xml:131 +msgid "<option>-a</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:317 +msgid "<option>--all-versions</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:318 +msgid "" +"Print full records for all available versions. This is the default; to turn " +"it off, use <option>--no-all-versions</option>. If <option>--no-all-" +"versions</option> is specified, only the candidate version will displayed " +"(the one which would be selected for installation). This option is only " +"applicable to the <literal>show</literal> command. Configuration Item: " +"<literal>APT::Cache::AllVersions</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:326 +msgid "<option>-g</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:326 +msgid "<option>--generate</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:327 +msgid "" +"Perform automatic package cache regeneration, rather than use the cache as " +"it is. This is the default; to turn it off, use <option>--no-generate</" +"option>. Configuration Item: <literal>APT::Cache::Generate</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:332 +msgid "<option>--names-only</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:332 apt-cdrom.8.xml:139 +msgid "<option>-n</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:333 +msgid "" +"Only search on the package names, not the long descriptions. Configuration " +"Item: <literal>APT::Cache::NamesOnly</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:337 +msgid "<option>--all-names</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:338 +msgid "" +"Make <literal>pkgnames</literal> print all names, including virtual packages " +"and missing dependencies. Configuration Item: <literal>APT::Cache::" +"AllNames</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:343 +msgid "<option>--recurse</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:344 +msgid "" +"Make <literal>depends</literal> and <literal>rdepends</literal> recursive so " +"that all packages mentioned are printed once. Configuration Item: " +"<literal>APT::Cache::RecurseDepends</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:349 +msgid "<option>--installed</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:351 +msgid "" +"Limit the output of <literal>depends</literal> and <literal>rdepends</" +"literal> to packages which are currently installed. Configuration Item: " +"<literal>APT::Cache::Installed</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist> +#: apt-cache.8.xml:356 apt-cdrom.8.xml:150 apt-config.8.xml:98 +#: apt-extracttemplates.1.xml:67 apt-ftparchive.1.xml:547 apt-get.8.xml:554 +#: apt-sortpkgs.1.xml:64 +msgid "&apt-commonoptions;" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-cache.8.xml:361 apt-get.8.xml:559 apt-key.8.xml:138 apt-mark.8.xml:122 +#: apt.conf.5.xml:988 apt_preferences.5.xml:615 +msgid "Files" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist> +#: apt-cache.8.xml:363 +msgid "&file-sourceslist; &file-statelists;" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-cache.8.xml:368 apt-cdrom.8.xml:155 apt-config.8.xml:103 +#: apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:563 apt-get.8.xml:569 +#: apt-key.8.xml:162 apt-mark.8.xml:133 apt-secure.8.xml:181 +#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:994 apt_preferences.5.xml:622 +#: sources.list.5.xml:233 +msgid "See Also" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cache.8.xml:369 +msgid "&apt-conf;, &sources-list;, &apt-get;" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-cache.8.xml:373 apt-cdrom.8.xml:160 apt-config.8.xml:108 +#: apt-extracttemplates.1.xml:78 apt-ftparchive.1.xml:567 apt-get.8.xml:575 +#: apt-mark.8.xml:137 apt-sortpkgs.1.xml:73 +msgid "Diagnostics" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cache.8.xml:374 +msgid "" +"<command>apt-cache</command> returns zero on normal operation, decimal 100 " +"on error." +msgstr "" + +#. type: Content of: <refentry><refentryinfo> +#: apt-cdrom.8.xml:13 +msgid "" +"&apt-author.jgunthorpe; &apt-author.team; &apt-email; &apt-product; <date>14 " +"February 2004</date>" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-cdrom.8.xml:21 apt-cdrom.8.xml:28 +msgid "apt-cdrom" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-cdrom.8.xml:29 +msgid "APT CDROM management utility" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-cdrom.8.xml:35 +msgid "" +"<command>apt-cdrom</command> <arg><option>-hvrmfan</option></arg> " +"<arg><option>-d=<replaceable>cdrom mount point</replaceable></option></arg> " +"<arg><option>-o=<replaceable>config string</replaceable></option></arg> " +"<arg><option>-c=<replaceable>file</replaceable></option></arg> <group> " +"<arg>add</arg> <arg>ident</arg> </group>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cdrom.8.xml:48 +msgid "" +"<command>apt-cdrom</command> is used to add a new CDROM to APTs list of " +"available sources. <command>apt-cdrom</command> takes care of determining " +"the structure of the disc as well as correcting for several possible mis-" +"burns and verifying the index files." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cdrom.8.xml:55 +msgid "" +"It is necessary to use <command>apt-cdrom</command> to add CDs to the APT " +"system, it cannot be done by hand. Furthermore each disk in a multi-cd set " +"must be inserted and scanned separately to account for possible mis-burns." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:65 +msgid "add" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:66 +msgid "" +"<literal>add</literal> is used to add a new disc to the source list. It will " +"unmount the CDROM device, prompt for a disk to be inserted and then procceed " +"to scan it and copy the index files. If the disc does not have a proper " +"<filename>disk</filename> directory you will be prompted for a descriptive " +"title." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:74 +msgid "" +"APT uses a CDROM ID to track which disc is currently in the drive and " +"maintains a database of these IDs in <filename>&statedir;/cdroms.list</" +"filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:81 +msgid "ident" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:82 +msgid "" +"A debugging tool to report the identity of the current disc as well as the " +"stored file name" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cdrom.8.xml:61 +msgid "" +"Unless the <option>-h</option>, or <option>--help</option> option is given " +"one of the commands below must be present. <placeholder type=\"variablelist" +"\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-cdrom.8.xml:91 +#, fuzzy +msgid "Options" +msgstr "Kolejne kroki" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:95 apt-ftparchive.1.xml:503 apt-get.8.xml:328 +msgid "<option>-d</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:95 +msgid "<option>--cdrom</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:96 +msgid "" +"Mount point; specify the location to mount the cdrom. This mount point must " +"be listed in <filename>/etc/fstab</filename> and properly configured. " +"Configuration Item: <literal>Acquire::cdrom::mount</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:104 +msgid "<option>-r</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:104 +msgid "<option>--rename</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:105 +msgid "" +"Rename a disc; change the label of a disk or override the disks given label. " +"This option will cause <command>apt-cdrom</command> to prompt for a new " +"label. Configuration Item: <literal>APT::CDROM::Rename</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:113 apt-get.8.xml:347 +msgid "<option>-m</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:113 +msgid "<option>--no-mount</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:114 +msgid "" +"No mounting; prevent <command>apt-cdrom</command> from mounting and " +"unmounting the mount point. Configuration Item: <literal>APT::CDROM::" +"NoMount</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:121 +msgid "<option>--fast</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:122 +msgid "" +"Fast Copy; Assume the package files are valid and do not check every " +"package. This option should be used only if <command>apt-cdrom</command> has " +"been run on this disc before and did not detect any errors. Configuration " +"Item: <literal>APT::CDROM::Fast</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:131 +msgid "<option>--thorough</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:132 +msgid "" +"Thorough Package Scan; This option may be needed with some old Debian " +"1.1/1.2 discs that have Package files in strange places. It takes much " +"longer to scan the CD but will pick them all up." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:140 apt-get.8.xml:378 +msgid "<option>--just-print</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:141 apt-get.8.xml:380 +msgid "<option>--recon</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:142 apt-get.8.xml:381 +msgid "<option>--no-act</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:143 +msgid "" +"No Changes; Do not change the &sources-list; file and do not write index " +"files. Everything is still checked however. Configuration Item: " +"<literal>APT::CDROM::NoAct</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cdrom.8.xml:156 +msgid "&apt-conf;, &apt-get;, &sources-list;" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cdrom.8.xml:161 +msgid "" +"<command>apt-cdrom</command> returns zero on normal operation, decimal 100 " +"on error." +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-config.8.xml:22 apt-config.8.xml:29 +msgid "apt-config" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-config.8.xml:30 +#, fuzzy +msgid "APT Configuration Query program" +msgstr "Plik konfiguracyjny" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-config.8.xml:36 +msgid "" +"<command>apt-config</command> <arg><option>-hv</option></arg> <arg><option>-" +"o=<replaceable>config string</replaceable></option></arg> <arg><option>-" +"c=<replaceable>file</replaceable></option></arg> <group choice=\"req\"> " +"<arg>shell</arg> <arg>dump</arg> </group>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-config.8.xml:48 +msgid "" +"<command>apt-config</command> is an internal program used by various " +"portions of the APT suite to provide consistent configurability. It accesses " +"the main configuration file <filename>/etc/apt/apt.conf</filename> in a " +"manner that is easy to use by scripted applications." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-config.8.xml:53 apt-ftparchive.1.xml:71 +msgid "" +"Unless the <option>-h</option>, or <option>--help</option> option is given " +"one of the commands below must be present." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-config.8.xml:58 +msgid "shell" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-config.8.xml:60 +msgid "" +"shell is used to access the configuration information from a shell script. " +"It is given pairs of arguments, the first being a shell variable and the " +"second the configuration value to query. As output it lists a series of " +"shell assignments commands for each present value. In a shell script it " +"should be used like:" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><informalexample><programlisting> +#: apt-config.8.xml:68 +#, no-wrap +msgid "" +"OPTS=\"-f\"\n" +"RES=`apt-config shell OPTS MyApp::options`\n" +"eval $RES\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-config.8.xml:73 +msgid "" +"This will set the shell environment variable $OPTS to the value of MyApp::" +"options with a default of <option>-f</option>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-config.8.xml:77 +msgid "" +"The configuration item may be postfixed with a /[fdbi]. f returns file " +"names, d returns directories, b returns true or false and i returns an " +"integer. Each of the returns is normalized and verified internally." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-config.8.xml:86 +msgid "Just show the contents of the configuration space." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-config.8.xml:104 apt-extracttemplates.1.xml:75 apt-ftparchive.1.xml:564 +#: apt-sortpkgs.1.xml:70 +msgid "&apt-conf;" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-config.8.xml:109 +msgid "" +"<command>apt-config</command> returns zero on normal operation, decimal 100 " +"on error." +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-extracttemplates.1.xml:22 apt-extracttemplates.1.xml:29 +msgid "apt-extracttemplates" +msgstr "" + +#. type: Content of: <refentry><refmeta><manvolnum> +#: apt-extracttemplates.1.xml:23 apt-ftparchive.1.xml:23 apt-sortpkgs.1.xml:23 +msgid "1" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-extracttemplates.1.xml:30 +msgid "Utility to extract DebConf config and templates from Debian packages" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-extracttemplates.1.xml:36 +msgid "" +"<command>apt-extracttemplates</command> <arg><option>-hv</option></arg> " +"<arg><option>-t=<replaceable>temporary directory</replaceable></option></" +"arg> <arg choice=\"plain\" rep=\"repeat\"><replaceable>file</replaceable></" +"arg>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-extracttemplates.1.xml:44 +msgid "" +"<command>apt-extracttemplates</command> will take one or more Debian package " +"files as input and write out (to a temporary directory) all associated " +"config scripts and template files. For each passed in package that contains " +"config scripts and templates, one line of output will be generated in the " +"format:" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-extracttemplates.1.xml:49 +msgid "package version template-file config-script" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-extracttemplates.1.xml:50 +msgid "" +"template-file and config-script are written to the temporary directory " +"specified by the -t or --tempdir (<literal>APT::ExtractTemplates::TempDir</" +"literal>) directory, with filenames of the form <filename>package.template." +"XXXX</filename> and <filename>package.config.XXXX</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-extracttemplates.1.xml:60 apt-get.8.xml:488 +msgid "<option>-t</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-extracttemplates.1.xml:60 +msgid "<option>--tempdir</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-extracttemplates.1.xml:62 +msgid "" +"Temporary directory in which to write extracted debconf template files and " +"config scripts. Configuration Item: <literal>APT::ExtractTemplates::" +"TempDir</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-extracttemplates.1.xml:79 +msgid "" +"<command>apt-extracttemplates</command> returns zero on normal operation, " +"decimal 100 on error." +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-ftparchive.1.xml:22 apt-ftparchive.1.xml:29 +msgid "apt-ftparchive" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-ftparchive.1.xml:30 +msgid "Utility to generate index files" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-ftparchive.1.xml:36 +msgid "" +"<command>apt-ftparchive</command> <arg><option>-hvdsq</option></arg> " +"<arg><option>--md5</option></arg> <arg><option>--delink</option></arg> " +"<arg><option>--readonly</option></arg> <arg><option>--contents</option></" +"arg> <arg><option>-o <replaceable>config</replaceable>=<replaceable>string</" +"replaceable></option></arg> <arg><option>-c=<replaceable>file</replaceable></" +"option></arg> <group choice=\"req\"> <arg>packages<arg choice=\"plain\" rep=" +"\"repeat\"><replaceable>path</replaceable></arg><arg><replaceable>override</" +"replaceable><arg><replaceable>pathprefix</replaceable></arg></arg></arg> " +"<arg>sources<arg choice=\"plain\" rep=\"repeat\"><replaceable>path</" +"replaceable></arg><arg><replaceable>override</" +"replaceable><arg><replaceable>pathprefix</replaceable></arg></arg></arg> " +"<arg>contents <arg choice=\"plain\"><replaceable>path</replaceable></arg></" +"arg> <arg>release <arg choice=\"plain\"><replaceable>path</replaceable></" +"arg></arg> <arg>generate <arg choice=\"plain\"><replaceable>config-file</" +"replaceable></arg> <arg choice=\"plain\" rep=\"repeat" +"\"><replaceable>section</replaceable></arg></arg> <arg>clean <arg choice=" +"\"plain\"><replaceable>config-file</replaceable></arg></arg> </group>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:56 +msgid "" +"<command>apt-ftparchive</command> is the command line tool that generates " +"the index files that APT uses to access a distribution source. The index " +"files should be generated on the origin site based on the content of that " +"site." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:60 +msgid "" +"<command>apt-ftparchive</command> is a superset of the &dpkg-scanpackages; " +"program, incorporating its entire functionality via the <literal>packages</" +"literal> command. It also contains a contents file generator, " +"<literal>contents</literal>, and an elaborate means to 'script' the " +"generation process for a complete archive." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:66 +msgid "" +"Internally <command>apt-ftparchive</command> can make use of binary " +"databases to cache the contents of a .deb file and it does not rely on any " +"external programs aside from &gzip;. When doing a full generate it " +"automatically performs file-change checks and builds the desired compressed " +"output files." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:75 +msgid "packages" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:77 +msgid "" +"The packages command generates a package file from a directory tree. It " +"takes the given directory and recursively searches it for .deb files, " +"emitting a package record to stdout for each. This command is approximately " +"equivalent to &dpkg-scanpackages;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:82 apt-ftparchive.1.xml:106 +msgid "" +"The option <option>--db</option> can be used to specify a binary caching DB." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:85 +msgid "sources" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:87 +msgid "" +"The <literal>sources</literal> command generates a source index file from a " +"directory tree. It takes the given directory and recursively searches it " +"for .dsc files, emitting a source record to stdout for each. This command is " +"approximately equivalent to &dpkg-scansources;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:92 +msgid "" +"If an override file is specified then a source override file will be looked " +"for with an extension of .src. The --source-override option can be used to " +"change the source override file that will be used." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:97 +msgid "contents" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:99 +msgid "" +"The <literal>contents</literal> command generates a contents file from a " +"directory tree. It takes the given directory and recursively searches it " +"for .deb files, and reads the file list from each file. It then sorts and " +"writes to stdout the list of files matched to packages. Directories are not " +"written to the output. If multiple packages own the same file then each " +"package is separated by a comma in the output." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:109 +msgid "release" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:111 +msgid "" +"The <literal>release</literal> command generates a Release file from a " +"directory tree. It recursively searches the given directory for Packages, " +"Packages.gz, Packages.bz2, Sources, Sources.gz, Sources.bz2, Release and " +"md5sum.txt files. It then writes to stdout a Release file containing an MD5 " +"digest and SHA1 digest for each file." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:118 +msgid "" +"Values for the additional metadata fields in the Release file are taken from " +"the corresponding variables under <literal>APT::FTPArchive::Release</" +"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The " +"supported fields are: <literal>Origin</literal>, <literal>Label</literal>, " +"<literal>Suite</literal>, <literal>Version</literal>, <literal>Codename</" +"literal>, <literal>Date</literal>, <literal>Architectures</literal>, " +"<literal>Components</literal>, <literal>Description</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:128 +msgid "generate" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:130 +msgid "" +"The <literal>generate</literal> command is designed to be runnable from a " +"cron script and builds indexes according to the given config file. The " +"config language provides a flexible means of specifying which index files " +"are built from which directories, as well as providing a simple means of " +"maintaining the required settings." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:137 apt-get.8.xml:292 +msgid "clean" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:139 +msgid "" +"The <literal>clean</literal> command tidies the databases used by the given " +"configuration file by removing any records that are no longer necessary." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-ftparchive.1.xml:145 +#, fuzzy +msgid "The Generate Configuration" +msgstr "Plik konfiguracyjny" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:147 +msgid "" +"The <literal>generate</literal> command uses a configuration file to " +"describe the archives that are going to be generated. It follows the typical " +"ISC configuration format as seen in ISC tools like bind 8 and dhcpd. &apt-" +"conf; contains a description of the syntax. Note that the generate " +"configuration is parsed in sectional manner, but &apt-conf; is parsed in a " +"tree manner. This only effects how the scope tag is handled." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:155 +msgid "" +"The generate configuration has 4 separate sections, each described below." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt-ftparchive.1.xml:157 +msgid "Dir Section" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:159 +msgid "" +"The <literal>Dir</literal> section defines the standard directories needed " +"to locate the files required during the generation process. These " +"directories are prepended certain relative paths defined in later sections " +"to produce a complete an absolute path." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:164 +msgid "ArchiveDir" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:166 +msgid "" +"Specifies the root of the FTP archive, in a standard Debian configuration " +"this is the directory that contains the <filename>ls-LR</filename> and dist " +"nodes." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:171 +#, fuzzy +msgid "OverrideDir" +msgstr "Wprowadzenie" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:173 +msgid "Specifies the location of the override files." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:176 +msgid "CacheDir" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:178 +msgid "Specifies the location of the cache files" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:181 +msgid "FileListDir" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:183 +msgid "" +"Specifies the location of the file list files, if the <literal>FileList</" +"literal> setting is used below." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt-ftparchive.1.xml:189 +msgid "Default Section" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:191 +msgid "" +"The <literal>Default</literal> section specifies default values, and " +"settings that control the operation of the generator. Other sections may " +"override these defaults with a per-section setting." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:195 +msgid "Packages::Compress" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:197 +msgid "" +"Sets the default compression schemes to use for the Package index files. It " +"is a string that contains a space separated list of at least one of: '.' (no " +"compression), 'gzip' and 'bzip2'. The default for all compression schemes is " +"'. gzip'." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:203 +msgid "Packages::Extensions" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:205 +msgid "" +"Sets the default list of file extensions that are package files. This " +"defaults to '.deb'." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:209 +msgid "Sources::Compress" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:211 +msgid "" +"This is similar to <literal>Packages::Compress</literal> except that it " +"controls the compression for the Sources files." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:215 +msgid "Sources::Extensions" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:217 +msgid "" +"Sets the default list of file extensions that are source files. This " +"defaults to '.dsc'." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:221 +msgid "Contents::Compress" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:223 +msgid "" +"This is similar to <literal>Packages::Compress</literal> except that it " +"controls the compression for the Contents files." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:227 +msgid "DeLinkLimit" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:229 +msgid "" +"Specifies the number of kilobytes to delink (and replace with hard links) " +"per run. This is used in conjunction with the per-section <literal>External-" +"Links</literal> setting." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:234 +msgid "FileMode" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:236 +msgid "" +"Specifies the mode of all created index files. It defaults to 0644. All " +"index files are set to this mode with no regard to the umask." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt-ftparchive.1.xml:243 +msgid "TreeDefault Section" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:245 +msgid "" +"Sets defaults specific to <literal>Tree</literal> sections. All of these " +"variables are substitution variables and have the strings $(DIST), " +"$(SECTION) and $(ARCH) replaced with their respective values." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:250 +msgid "MaxContentsChange" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:252 +msgid "" +"Sets the number of kilobytes of contents files that are generated each day. " +"The contents files are round-robined so that over several days they will all " +"be rebuilt." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:257 +msgid "ContentsAge" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:259 +msgid "" +"Controls the number of days a contents file is allowed to be checked without " +"changing. If this limit is passed the mtime of the contents file is updated. " +"This case can occur if the package file is changed in such a way that does " +"not result in a new contents file [override edit for instance]. A hold off " +"is allowed in hopes that new .debs will be installed, requiring a new file " +"anyhow. The default is 10, the units are in days." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:268 +msgid "Directory" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:270 +msgid "" +"Sets the top of the .deb directory tree. Defaults to <filename>$(DIST)/" +"$(SECTION)/binary-$(ARCH)/</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:274 +msgid "SrcDirectory" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:276 +msgid "" +"Sets the top of the source package directory tree. Defaults to <filename>" +"$(DIST)/$(SECTION)/source/</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:280 apt-ftparchive.1.xml:406 +msgid "Packages" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:282 +msgid "" +"Sets the output Packages file. Defaults to <filename>$(DIST)/$(SECTION)/" +"binary-$(ARCH)/Packages</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:286 apt-ftparchive.1.xml:411 +msgid "Sources" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:288 +msgid "" +"Sets the output Packages file. Defaults to <filename>$(DIST)/$(SECTION)/" +"source/Sources</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:292 +msgid "InternalPrefix" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:294 +msgid "" +"Sets the path prefix that causes a symlink to be considered an internal link " +"instead of an external link. Defaults to <filename>$(DIST)/$(SECTION)/</" +"filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:299 apt-ftparchive.1.xml:417 +msgid "Contents" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:301 +msgid "" +"Sets the output Contents file. Defaults to <filename>$(DIST)/Contents-$(ARCH)" +"</filename>. If this setting causes multiple Packages files to map onto a " +"single Contents file (such as the default) then <command>apt-ftparchive</" +"command> will integrate those package files together automatically." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:308 +msgid "Contents::Header" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:310 +msgid "Sets header file to prepend to the contents output." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:313 apt-ftparchive.1.xml:442 +msgid "BinCacheDB" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:315 +msgid "" +"Sets the binary cache database to use for this section. Multiple sections " +"can share the same database." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:319 +msgid "FileList" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:321 +msgid "" +"Specifies that instead of walking the directory tree, <command>apt-" +"ftparchive</command> should read the list of files from the given file. " +"Relative files names are prefixed with the archive directory." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:326 +msgid "SourceFileList" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:328 +msgid "" +"Specifies that instead of walking the directory tree, <command>apt-" +"ftparchive</command> should read the list of files from the given file. " +"Relative files names are prefixed with the archive directory. This is used " +"when processing source indexes." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt-ftparchive.1.xml:336 +msgid "Tree Section" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:338 +msgid "" +"The <literal>Tree</literal> section defines a standard Debian file tree " +"which consists of a base directory, then multiple sections in that base " +"directory and finally multiple Architectures in each section. The exact " +"pathing used is defined by the <literal>Directory</literal> substitution " +"variable." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:343 +msgid "" +"The <literal>Tree</literal> section takes a scope tag which sets the " +"<literal>$(DIST)</literal> variable and defines the root of the tree (the " +"path is prefixed by <literal>ArchiveDir</literal>). Typically this is a " +"setting such as <filename>dists/woody</filename>." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:348 +msgid "" +"All of the settings defined in the <literal>TreeDefault</literal> section " +"can be use in a <literal>Tree</literal> section as well as three new " +"variables." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:351 +msgid "" +"When processing a <literal>Tree</literal> section <command>apt-ftparchive</" +"command> performs an operation similar to:" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><informalexample><programlisting> +#: apt-ftparchive.1.xml:354 +#, no-wrap +msgid "" +"for i in Sections do \n" +" for j in Architectures do\n" +" Generate for DIST=scope SECTION=i ARCH=j\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:360 +msgid "Sections" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:362 +msgid "" +"This is a space separated list of sections which appear under the " +"distribution, typically this is something like <literal>main contrib non-" +"free</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:367 +msgid "Architectures" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:369 +msgid "" +"This is a space separated list of all the architectures that appear under " +"search section. The special architecture 'source' is used to indicate that " +"this tree has a source archive." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:374 apt-ftparchive.1.xml:422 +#, fuzzy +msgid "BinOverride" +msgstr "Wprowadzenie" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:376 +msgid "" +"Sets the binary override file. The override file contains section, priority " +"and maintainer address information." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:380 apt-ftparchive.1.xml:427 +#, fuzzy +msgid "SrcOverride" +msgstr "Wprowadzenie" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:382 +msgid "" +"Sets the source override file. The override file contains section " +"information." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:386 apt-ftparchive.1.xml:432 +msgid "ExtraOverride" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:388 apt-ftparchive.1.xml:434 +msgid "Sets the binary extra override file." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:391 apt-ftparchive.1.xml:437 +msgid "SrcExtraOverride" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:393 apt-ftparchive.1.xml:439 +msgid "Sets the source extra override file." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt-ftparchive.1.xml:398 +msgid "BinDirectory Section" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:400 +msgid "" +"The <literal>bindirectory</literal> section defines a binary directory tree " +"with no special structure. The scope tag specifies the location of the " +"binary directory and the settings are similar to the <literal>Tree</literal> " +"section with no substitution variables or <literal>Section</" +"literal><literal>Architecture</literal> settings." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:408 +msgid "Sets the Packages file output." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:413 +msgid "" +"Sets the Sources file output. At least one of <literal>Packages</literal> or " +"<literal>Sources</literal> is required." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:419 +msgid "Sets the Contents file output. (optional)" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:424 +msgid "Sets the binary override file." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:429 +msgid "Sets the source override file." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:444 +msgid "Sets the cache DB." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:447 +msgid "PathPrefix" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:449 +msgid "Appends a path to all the output paths." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:452 +msgid "FileList, SourceFileList" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:454 +msgid "Specifies the file list file." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-ftparchive.1.xml:461 +msgid "The Binary Override File" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:462 +msgid "" +"The binary override file is fully compatible with &dpkg-scanpackages;. It " +"contains 4 fields separated by spaces. The first field is the package name, " +"the second is the priority to force that package to, the third is the the " +"section to force that package to and the final field is the maintainer " +"permutation field." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><literallayout> +#: apt-ftparchive.1.xml:468 +#, no-wrap +msgid "old [// oldn]* => new" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><literallayout> +#: apt-ftparchive.1.xml:470 +#, no-wrap +msgid "new" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:467 +msgid "" +"The general form of the maintainer field is: <placeholder type=" +"\"literallayout\" id=\"0\"/> or simply, <placeholder type=\"literallayout\" " +"id=\"1\"/> The first form allows a double-slash separated list of old email " +"addresses to be specified. If any of those are found then new is substituted " +"for the maintainer field. The second form unconditionally substitutes the " +"maintainer field." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-ftparchive.1.xml:478 +msgid "The Source Override File" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:480 +msgid "" +"The source override file is fully compatible with &dpkg-scansources;. It " +"contains 2 fields separated by spaces. The first fields is the source " +"package name, the second is the section to assign it." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-ftparchive.1.xml:485 +msgid "The Extra Override File" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:487 +msgid "" +"The extra override file allows any arbitrary tag to be added or replaced in " +"the output. It has 3 columns, the first is the package, the second is the " +"tag and the remainder of the line is the new value." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:496 +msgid "<option>--md5</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:498 +msgid "" +"Generate MD5 sums. This defaults to on, when turned off the generated index " +"files will not have MD5Sum fields where possible. Configuration Item: " +"<literal>APT::FTPArchive::MD5</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:503 +msgid "<option>--db</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:505 +msgid "" +"Use a binary caching DB. This has no effect on the generate command. " +"Configuration Item: <literal>APT::FTPArchive::DB</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:511 +msgid "" +"Quiet; produces output suitable for logging, omitting progress indicators. " +"More q's will produce more quiet up to a maximum of 2. You can also use " +"<option>-q=#</option> to set the quiet level, overriding the configuration " +"file. Configuration Item: <literal>quiet</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:517 +msgid "<option>--delink</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:519 +msgid "" +"Perform Delinking. If the <literal>External-Links</literal> setting is used " +"then this option actually enables delinking of the files. It defaults to on " +"and can be turned off with <option>--no-delink</option>. Configuration " +"Item: <literal>APT::FTPArchive::DeLinkAct</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:525 +msgid "<option>--contents</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:527 +msgid "" +"Perform contents generation. When this option is set and package indexes are " +"being generated with a cache DB then the file listing will also be extracted " +"and stored in the DB for later use. When using the generate command this " +"option also allows the creation of any Contents files. The default is on. " +"Configuration Item: <literal>APT::FTPArchive::Contents</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:535 +msgid "<option>--source-override</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:537 +msgid "" +"Select the source override file to use with the <literal>sources</literal> " +"command. Configuration Item: <literal>APT::FTPArchive::SourceOverride</" +"literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:541 +msgid "<option>--readonly</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:543 +msgid "" +"Make the caching databases read only. Configuration Item: <literal>APT::" +"FTPArchive::ReadOnlyDB</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-ftparchive.1.xml:552 apt.conf.5.xml:982 apt_preferences.5.xml:462 +#: sources.list.5.xml:193 +msgid "Examples" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><programlisting> +#: apt-ftparchive.1.xml:558 +#, no-wrap +msgid "<command>apt-ftparchive</command> packages <replaceable>directory</replaceable> | <command>gzip</command> > <filename>Packages.gz</filename>\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:554 +msgid "" +"To create a compressed Packages file for a directory containing binary " +"packages (.deb): <placeholder type=\"programlisting\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:568 +msgid "" +"<command>apt-ftparchive</command> returns zero on normal operation, decimal " +"100 on error." +msgstr "" + +#. The last update date +#. type: Content of: <refentry><refentryinfo> +#: apt-get.8.xml:13 +msgid "" +"&apt-author.jgunthorpe; &apt-author.team; &apt-email; &apt-product; <date>08 " +"November 2008</date>" +msgstr "" + +#. type: <heading></heading> +#: apt-get.8.xml:22 apt-get.8.xml:29 guide.sgml:96 +msgid "apt-get" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-get.8.xml:30 +msgid "APT package handling utility -- command-line interface" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-get.8.xml:36 +msgid "" +"<command>apt-get</command> <arg><option>-sqdyfmubV</option></arg> <arg> " +"<option>-o= <replaceable>config_string</replaceable> </option> </arg> <arg> " +"<option>-c= <replaceable>config_file</replaceable> </option> </arg> <arg> " +"<option>-t=</option> <group choice='req'> <arg choice='plain'> " +"<replaceable>target_release_name</replaceable> </arg> <arg choice='plain'> " +"<replaceable>target_release_number_expression</replaceable> </arg> <arg " +"choice='plain'> <replaceable>target_release_codename</replaceable> </arg> </" +"group> </arg> <group choice=\"req\"> <arg choice='plain'>update</arg> <arg " +"choice='plain'>upgrade</arg> <arg choice='plain'>dselect-upgrade</arg> <arg " +"choice='plain'>dist-upgrade</arg> <arg choice='plain'>install <arg choice=" +"\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable> <arg> <group " +"choice='req'> <arg choice='plain'> =<replaceable>pkg_version_number</" +"replaceable> </arg> <arg choice='plain'> /<replaceable>target_release_name</" +"replaceable> </arg> <arg choice='plain'> /" +"<replaceable>target_release_codename</replaceable> </arg> </group> </arg> </" +"arg> </arg> <arg choice='plain'>remove <arg choice=\"plain\" rep=\"repeat" +"\"><replaceable>pkg</replaceable></arg></arg> <arg choice='plain'>purge <arg " +"choice=\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable></arg></arg> " +"<arg choice='plain'>source <arg choice=\"plain\" rep=\"repeat" +"\"><replaceable>pkg</replaceable> <arg> <group choice='req'> <arg " +"choice='plain'> =<replaceable>pkg_version_number</replaceable> </arg> <arg " +"choice='plain'> /<replaceable>target_release_name</replaceable> </arg> <arg " +"choice='plain'> /<replaceable>target_release_codename</replaceable> </arg> </" +"group> </arg> </arg> </arg> <arg choice='plain'>build-dep <arg choice=\"plain" +"\" rep=\"repeat\"><replaceable>pkg</replaceable></arg></arg> <arg " +"choice='plain'>check</arg> <arg choice='plain'>clean</arg> <arg " +"choice='plain'>autoclean</arg> <arg choice='plain'>autoremove</arg> <arg " +"choice='plain'> <group choice='req'> <arg choice='plain'>-v</arg> <arg " +"choice='plain'>--version</arg> </group> </arg> <arg choice='plain'> <group " +"choice='req'> <arg choice='plain'>-h</arg> <arg choice='plain'>--help</arg> " +"</group> </arg> </group>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-get.8.xml:126 +msgid "" +"<command>apt-get</command> is the command-line tool for handling packages, " +"and may be considered the user's \"back-end\" to other tools using the APT " +"library. Several \"front-end\" interfaces exist, such as &dselect;, " +"&aptitude;, &synaptic;, &gnome-apt; and &wajig;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:135 apt-key.8.xml:123 +msgid "update" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:136 +msgid "" +"<literal>update</literal> is used to resynchronize the package index files " +"from their sources. The indexes of available packages are fetched from the " +"location(s) specified in <filename>/etc/apt/sources.list</filename>. For " +"example, when using a Debian archive, this command retrieves and scans the " +"<filename>Packages.gz</filename> files, so that information about new and " +"updated packages is available. An <literal>update</literal> should always be " +"performed before an <literal>upgrade</literal> or <literal>dist-upgrade</" +"literal>. Please be aware that the overall progress meter will be incorrect " +"as the size of the package files cannot be known in advance." +msgstr "" + +#. type: <tag></tag> +#: apt-get.8.xml:147 guide.sgml:121 +msgid "upgrade" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:148 +msgid "" +"<literal>upgrade</literal> is used to install the newest versions of all " +"packages currently installed on the system from the sources enumerated in " +"<filename>/etc/apt/sources.list</filename>. Packages currently installed " +"with new versions available are retrieved and upgraded; under no " +"circumstances are currently installed packages removed, or packages not " +"already installed retrieved and installed. New versions of currently " +"installed packages that cannot be upgraded without changing the install " +"status of another package will be left at their current version. An " +"<literal>update</literal> must be performed first so that <command>apt-get</" +"command> knows that new versions of packages are available." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:160 +msgid "dselect-upgrade" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:161 +msgid "" +"<literal>dselect-upgrade</literal> is used in conjunction with the " +"traditional Debian packaging front-end, &dselect;. <literal>dselect-upgrade</" +"literal> follows the changes made by &dselect; to the <literal>Status</" +"literal> field of available packages, and performs the actions necessary to " +"realize that state (for instance, the removal of old and the installation of " +"new packages)." +msgstr "" + +#. type: <tag></tag> +#: apt-get.8.xml:170 guide.sgml:140 +msgid "dist-upgrade" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:171 +msgid "" +"<literal>dist-upgrade</literal> in addition to performing the function of " +"<literal>upgrade</literal>, also intelligently handles changing dependencies " +"with new versions of packages; <command>apt-get</command> has a \"smart\" " +"conflict resolution system, and it will attempt to upgrade the most " +"important packages at the expense of less important ones if necessary. So, " +"<literal>dist-upgrade</literal> command may remove some packages. The " +"<filename>/etc/apt/sources.list</filename> file contains a list of locations " +"from which to retrieve desired package files. See also &apt-preferences; " +"for a mechanism for overriding the general settings for individual packages." +msgstr "" + +#. type: <tag></tag> +#: apt-get.8.xml:183 guide.sgml:131 +msgid "install" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:185 +msgid "" +"<literal>install</literal> is followed by one or more packages desired for " +"installation or upgrading. Each package is a package name, not a fully " +"qualified filename (for instance, in a Debian GNU/Linux system, libc6 would " +"be the argument provided, not <literal>libc6_1.9.6-2.deb</literal>). All " +"packages required by the package(s) specified for installation will also be " +"retrieved and installed. The <filename>/etc/apt/sources.list</filename> " +"file is used to locate the desired packages. If a hyphen is appended to the " +"package name (with no intervening space), the identified package will be " +"removed if it is installed. Similarly a plus sign can be used to designate " +"a package to install. These latter features may be used to override " +"decisions made by apt-get's conflict resolution system." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:203 +msgid "" +"A specific version of a package can be selected for installation by " +"following the package name with an equals and the version of the package to " +"select. This will cause that version to be located and selected for install. " +"Alternatively a specific distribution can be selected by following the " +"package name with a slash and the version of the distribution or the Archive " +"name (stable, testing, unstable)." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:210 +msgid "" +"Both of the version selection mechanisms can downgrade packages and must be " +"used with care." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:213 +msgid "" +"This is also the target to use if you want to upgrade one or more already-" +"installed packages without upgrading every package you have on your system. " +"Unlike the \"upgrade\" target, which installs the newest version of all " +"currently installed packages, \"install\" will install the newest version of " +"only the package(s) specified. Simply provide the name of the package(s) " +"you wish to upgrade, and if a newer version is available, it (and its " +"dependencies, as described above) will be downloaded and installed." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:224 +msgid "" +"Finally, the &apt-preferences; mechanism allows you to create an alternative " +"installation policy for individual packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:228 +msgid "" +"If no package matches the given expression and the expression contains one " +"of '.', '?' or '*' then it is assumed to be a POSIX regular expression, and " +"it is applied to all package names in the database. Any matches are then " +"installed (or removed). Note that matching is done by substring so 'lo.*' " +"matches 'how-lo' and 'lowest'. If this is undesired, anchor the regular " +"expression with a '^' or '$' character, or create a more specific regular " +"expression." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:237 +msgid "remove" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:238 +msgid "" +"<literal>remove</literal> is identical to <literal>install</literal> except " +"that packages are removed instead of installed. Note the removing a package " +"leaves its configuration files in system. If a plus sign is appended to the " +"package name (with no intervening space), the identified package will be " +"installed instead of removed." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:245 +msgid "purge" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:246 +msgid "" +"<literal>purge</literal> is identical to <literal>remove</literal> except " +"that packages are removed and purged (any configuration files are deleted " +"too)." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:250 +msgid "source" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:251 +msgid "" +"<literal>source</literal> causes <command>apt-get</command> to fetch source " +"packages. APT will examine the available packages to decide which source " +"package to fetch. It will then find and download into the current directory " +"the newest available version of that source package while respect the " +"default release, set with the option <literal>APT::Default-Release</" +"literal>, the <option>-t</option> option or per package with the " +"<literal>pkg/release</literal> syntax, if possible." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:259 +msgid "" +"Source packages are tracked separately from binary packages via <literal>deb-" +"src</literal> type lines in the &sources-list; file. This means that you " +"will need to add such a line for each repository you want to get sources " +"from. If you don't do this you will properly get another (newer, older or " +"none) source version than the one you have installed or could install." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:266 +msgid "" +"If the <option>--compile</option> option is specified then the package will " +"be compiled to a binary .deb using <command>dpkg-buildpackage</command>, if " +"<option>--download-only</option> is specified then the source package will " +"not be unpacked." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:271 +msgid "" +"A specific source version can be retrieved by postfixing the source name " +"with an equals and then the version to fetch, similar to the mechanism used " +"for the package files. This enables exact matching of the source package " +"name and version, implicitly enabling the <literal>APT::Get::Only-Source</" +"literal> option." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:277 +msgid "" +"Note that source packages are not tracked like binary packages, they exist " +"only in the current directory and are similar to downloading source tar " +"balls." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:282 +msgid "build-dep" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:283 +msgid "" +"<literal>build-dep</literal> causes apt-get to install/remove packages in an " +"attempt to satisfy the build dependencies for a source package." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:287 +msgid "check" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:288 +msgid "" +"<literal>check</literal> is a diagnostic tool; it updates the package cache " +"and checks for broken dependencies." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:293 +msgid "" +"<literal>clean</literal> clears out the local repository of retrieved " +"package files. It removes everything but the lock file from " +"<filename>&cachedir;/archives/</filename> and <filename>&cachedir;/archives/" +"partial/</filename>. When APT is used as a &dselect; method, <literal>clean</" +"literal> is run automatically. Those who do not use dselect will likely " +"want to run <literal>apt-get clean</literal> from time to time to free up " +"disk space." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:302 +msgid "autoclean" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:303 +msgid "" +"Like <literal>clean</literal>, <literal>autoclean</literal> clears out the " +"local repository of retrieved package files. The difference is that it only " +"removes package files that can no longer be downloaded, and are largely " +"useless. This allows a cache to be maintained over a long period without it " +"growing out of control. The configuration option <literal>APT::Clean-" +"Installed</literal> will prevent installed packages from being erased if it " +"is set to off." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:312 +msgid "autoremove" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:313 +msgid "" +"<literal>autoremove</literal> is used to remove packages that were " +"automatically installed to satisfy dependencies for some package and that " +"are no more needed." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:323 apt-get.8.xml:429 +msgid "<option>--no-install-recommends</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:324 +msgid "" +"Do not consider recommended packages as a dependency for installing. " +"Configuration Item: <literal>APT::Install-Recommends</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:328 +msgid "<option>--download-only</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:329 +msgid "" +"Download only; package files are only retrieved, not unpacked or installed. " +"Configuration Item: <literal>APT::Get::Download-Only</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:333 +msgid "<option>--fix-broken</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:334 +msgid "" +"Fix; attempt to correct a system with broken dependencies in place. This " +"option, when used with install/remove, can omit any packages to permit APT " +"to deduce a likely solution. Any Package that are specified must completely " +"correct the problem. The option is sometimes necessary when running APT for " +"the first time; APT itself does not allow broken package dependencies to " +"exist on a system. It is possible that a system's dependency structure can " +"be so corrupt as to require manual intervention (which usually means using " +"&dselect; or <command>dpkg --remove</command> to eliminate some of the " +"offending packages). Use of this option together with <option>-m</option> " +"may produce an error in some situations. Configuration Item: <literal>APT::" +"Get::Fix-Broken</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:347 +msgid "<option>--ignore-missing</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:348 +msgid "<option>--fix-missing</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:349 +msgid "" +"Ignore missing packages; If packages cannot be retrieved or fail the " +"integrity check after retrieval (corrupted package files), hold back those " +"packages and handle the result. Use of this option together with <option>-f</" +"option> may produce an error in some situations. If a package is selected " +"for installation (particularly if it is mentioned on the command line) and " +"it could not be downloaded then it will be silently held back. " +"Configuration Item: <literal>APT::Get::Fix-Missing</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:359 +msgid "<option>--no-download</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:360 +msgid "" +"Disables downloading of packages. This is best used with <option>--ignore-" +"missing</option> to force APT to use only the .debs it has already " +"downloaded. Configuration Item: <literal>APT::Get::Download</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:367 +msgid "" +"Quiet; produces output suitable for logging, omitting progress indicators. " +"More q's will produce more quiet up to a maximum of 2. You can also use " +"<option>-q=#</option> to set the quiet level, overriding the configuration " +"file. Note that quiet level 2 implies <option>-y</option>, you should never " +"use -qq without a no-action modifier such as -d, --print-uris or -s as APT " +"may decided to do something you did not expect. Configuration Item: " +"<literal>quiet</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:377 +msgid "<option>--simulate</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:379 +msgid "<option>--dry-run</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:382 +msgid "" +"No action; perform a simulation of events that would occur but do not " +"actually change the system. Configuration Item: <literal>APT::Get::" +"Simulate</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:386 +msgid "" +"Simulation run as user will deactivate locking (<literal>Debug::NoLocking</" +"literal>) automatic. Also a notice will be displayed indicating that this " +"is only a simulation, if the option <literal>APT::Get::Show-User-Simulation-" +"Note</literal> is set (Default: true). Neither NoLocking nor the notice " +"will be triggered if run as root (root should know what he is doing without " +"further warnings by <literal>apt-get</literal>)." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:392 +msgid "" +"Simulate prints out a series of lines each one representing a dpkg " +"operation, Configure (Conf), Remove (Remv), Unpack (Inst). Square brackets " +"indicate broken packages and empty set of square brackets meaning breaks " +"that are of no consequence (rare)." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:399 +msgid "<option>-y</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:399 +msgid "<option>--yes</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:400 +msgid "<option>--assume-yes</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:401 +msgid "" +"Automatic yes to prompts; assume \"yes\" as answer to all prompts and run " +"non-interactively. If an undesirable situation, such as changing a held " +"package, trying to install a unauthenticated package or removing an " +"essential package occurs then <literal>apt-get</literal> will abort. " +"Configuration Item: <literal>APT::Get::Assume-Yes</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:408 +msgid "<option>-u</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:408 +msgid "<option>--show-upgraded</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:409 +msgid "" +"Show upgraded packages; Print out a list of all packages that are to be " +"upgraded. Configuration Item: <literal>APT::Get::Show-Upgraded</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:414 +msgid "<option>-V</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:414 +msgid "<option>--verbose-versions</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:415 +msgid "" +"Show full versions for upgraded and installed packages. Configuration Item: " +"<literal>APT::Get::Show-Versions</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:419 +msgid "<option>-b</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:419 +msgid "<option>--compile</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:420 +msgid "<option>--build</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:421 +msgid "" +"Compile source packages after downloading them. Configuration Item: " +"<literal>APT::Get::Compile</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:425 +msgid "<option>--install-recommends</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:426 +msgid "Also install recommended packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:430 +msgid "Do not install recommended packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:433 +msgid "<option>--ignore-hold</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:434 +msgid "" +"Ignore package Holds; This causes <command>apt-get</command> to ignore a " +"hold placed on a package. This may be useful in conjunction with " +"<literal>dist-upgrade</literal> to override a large number of undesired " +"holds. Configuration Item: <literal>APT::Ignore-Hold</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:440 +msgid "<option>--no-upgrade</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:441 +msgid "" +"Do not upgrade packages; When used in conjunction with <literal>install</" +"literal>, <literal>no-upgrade</literal> will prevent packages on the command " +"line from being upgraded if they are already installed. Configuration Item: " +"<literal>APT::Get::Upgrade</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:447 +msgid "<option>--force-yes</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:448 +msgid "" +"Force yes; This is a dangerous option that will cause apt to continue " +"without prompting if it is doing something potentially harmful. It should " +"not be used except in very special situations. Using <literal>force-yes</" +"literal> can potentially destroy your system! Configuration Item: " +"<literal>APT::Get::force-yes</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:455 +msgid "<option>--print-uris</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:456 +msgid "" +"Instead of fetching the files to install their URIs are printed. Each URI " +"will have the path, the destination file name, the size and the expected md5 " +"hash. Note that the file name to write to will not always match the file " +"name on the remote site! This also works with the <literal>source</literal> " +"and <literal>update</literal> commands. When used with the <literal>update</" +"literal> command the MD5 and size are not included, and it is up to the user " +"to decompress any compressed files. Configuration Item: <literal>APT::Get::" +"Print-URIs</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:466 +msgid "<option>--purge</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:467 +msgid "" +"Use purge instead of remove for anything that would be removed. An asterisk " +"(\"*\") will be displayed next to packages which are scheduled to be purged. " +"<option>remove --purge</option> is equivalent for <option>purge</option> " +"command. Configuration Item: <literal>APT::Get::Purge</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:474 +msgid "<option>--reinstall</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:475 +msgid "" +"Re-Install packages that are already installed and at the newest version. " +"Configuration Item: <literal>APT::Get::ReInstall</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:479 +msgid "<option>--list-cleanup</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:480 +msgid "" +"This option defaults to on, use <literal>--no-list-cleanup</literal> to turn " +"it off. When on <command>apt-get</command> will automatically manage the " +"contents of <filename>&statedir;/lists</filename> to ensure that obsolete " +"files are erased. The only reason to turn it off is if you frequently " +"change your source list. Configuration Item: <literal>APT::Get::List-" +"Cleanup</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:489 +msgid "<option>--target-release</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:490 +msgid "<option>--default-release</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:491 +msgid "" +"This option controls the default input to the policy engine, it creates a " +"default pin at priority 990 using the specified release string. This " +"overrides the general settings in <filename>/etc/apt/preferences</" +"filename>. Specifically pinned packages are not affected by the value of " +"this option. In short, this option lets you have simple control over which " +"distribution packages will be retrieved from. Some common examples might be " +"<option>-t '2.1*'</option>, <option>-t unstable</option> or <option>-t sid</" +"option>. Configuration Item: <literal>APT::Default-Release</literal>; see " +"also the &apt-preferences; manual page." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:504 +msgid "<option>--trivial-only</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:506 +msgid "" +"Only perform operations that are 'trivial'. Logically this can be considered " +"related to <option>--assume-yes</option>, where <option>--assume-yes</" +"option> will answer yes to any prompt, <option>--trivial-only</option> will " +"answer no. Configuration Item: <literal>APT::Get::Trivial-Only</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:512 +msgid "<option>--no-remove</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:513 +msgid "" +"If any packages are to be removed apt-get immediately aborts without " +"prompting. Configuration Item: <literal>APT::Get::Remove</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:518 +msgid "<option>--auto-remove</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:519 +msgid "" +"If the command is either <literal>install</literal> or <literal>remove</" +"literal>, then this option acts like running <literal>autoremove</literal> " +"command, removing the unused dependency packages. Configuration Item: " +"<literal>APT::Get::AutomaticRemove</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:525 +msgid "<option>--only-source</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:526 +msgid "" +"Only has meaning for the <literal>source</literal> and <literal>build-dep</" +"literal> commands. Indicates that the given source names are not to be " +"mapped through the binary table. This means that if this option is " +"specified, these commands will only accept source package names as " +"arguments, rather than accepting binary package names and looking up the " +"corresponding source package. Configuration Item: <literal>APT::Get::Only-" +"Source</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:536 +msgid "<option>--diff-only</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:536 +msgid "<option>--dsc-only</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:536 +msgid "<option>--tar-only</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:537 +msgid "" +"Download only the diff, dsc, or tar file of a source archive. Configuration " +"Item: <literal>APT::Get::Diff-Only</literal>, <literal>APT::Get::Dsc-Only</" +"literal>, and <literal>APT::Get::Tar-Only</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:542 +msgid "<option>--arch-only</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:543 +msgid "" +"Only process architecture-dependent build-dependencies. Configuration Item: " +"<literal>APT::Get::Arch-Only</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:547 +msgid "<option>--allow-unauthenticated</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:548 +msgid "" +"Ignore if packages can't be authenticated and don't prompt about it. This " +"is useful for tools like pbuilder. Configuration Item: <literal>APT::Get::" +"AllowUnauthenticated</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist> +#: apt-get.8.xml:561 +msgid "" +"&file-sourceslist; &file-aptconf; &file-preferences; &file-cachearchives; " +"&file-statelists;" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-get.8.xml:570 +msgid "" +"&apt-cache;, &apt-cdrom;, &dpkg;, &dselect;, &sources-list;, &apt-conf;, " +"&apt-config;, &apt-secure;, The APT User's guide in &guidesdir;, &apt-" +"preferences;, the APT Howto." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-get.8.xml:576 +msgid "" +"<command>apt-get</command> returns zero on normal operation, decimal 100 on " +"error." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-get.8.xml:579 +msgid "ORIGINAL AUTHORS" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-get.8.xml:580 +msgid "&apt-author.jgunthorpe;" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-get.8.xml:583 +msgid "CURRENT AUTHORS" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-get.8.xml:585 +msgid "&apt-author.team;" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-key.8.xml:14 apt-key.8.xml:21 +msgid "apt-key" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-key.8.xml:22 +msgid "APT key management utility" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-key.8.xml:28 +msgid "" +"<command>apt-key</command> <arg><replaceable>command</replaceable>/</arg> " +"<arg rep=\"repeat\"><option><replaceable>arguments</replaceable></option></" +"arg>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-key.8.xml:36 +msgid "" +"<command>apt-key</command> is used to manage the list of keys used by apt to " +"authenticate packages. Packages which have been authenticated using these " +"keys will be considered trusted." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-key.8.xml:42 +msgid "Commands" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:44 +msgid "add <replaceable>filename</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:48 +msgid "" +"Add a new key to the list of trusted keys. The key is read from " +"<replaceable>filename</replaceable>, or standard input if " +"<replaceable>filename</replaceable> is <literal>-</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:56 +msgid "del <replaceable>keyid</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:60 +msgid "Remove a key from the list of trusted keys." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:67 +msgid "export <replaceable>keyid</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:71 +msgid "Output the key <replaceable>keyid</replaceable> to standard output." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:78 +msgid "exportall" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:82 +msgid "Output all trusted keys to standard output." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:89 +msgid "list" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:93 +msgid "List trusted keys." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:100 +msgid "finger" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:104 +msgid "List fingerprints of trusted keys." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:111 +msgid "adv" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:115 +msgid "" +"Pass advanced options to gpg. With adv --recv-key you can download the " +"public key." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:127 +msgid "" +"Update the local keyring with the keyring of Debian archive keys and removes " +"from the keyring the archive keys which are no longer valid." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:140 +msgid "<filename>/etc/apt/trusted.gpg</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:141 +msgid "Keyring of local trusted keys, new keys will be added here." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:144 +msgid "<filename>/etc/apt/trustdb.gpg</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:145 +msgid "Local trust database of archive keys." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:148 +msgid "<filename>/usr/share/keyrings/debian-archive-keyring.gpg</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:149 +msgid "Keyring of Debian archive trusted keys." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:152 +msgid "" +"<filename>/usr/share/keyrings/debian-archive-removed-keys.gpg</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:153 +msgid "Keyring of Debian archive removed trusted keys." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-key.8.xml:164 +msgid "&apt-get;, &apt-secure;" +msgstr "" + +#. The last update date +#. type: Content of: <refentry><refentryinfo> +#: apt-mark.8.xml:13 +msgid "" +"&apt-author.moconnor; &apt-author.team; &apt-email; &apt-product; <date>9 " +"August 2009</date>" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-mark.8.xml:22 apt-mark.8.xml:29 +msgid "apt-mark" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-mark.8.xml:30 +msgid "mark/unmark a package as being automatically-installed" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-mark.8.xml:36 +msgid "" +" <command>apt-mark</command> <arg><option>-hv</option></arg> <arg><option>-" +"f=<replaceable>FILENAME</replaceable></option></arg> <group choice=\"plain" +"\"> <arg choice=\"plain\"> <group choice=\"req\"> <arg choice=\"plain" +"\">markauto</arg> <arg choice=\"plain\">unmarkauto</arg> </group> <arg " +"choice=\"plain\" rep=\"repeat\"><replaceable>package</replaceable></arg> </" +"arg> <arg choice=\"plain\">showauto</arg> </group>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-mark.8.xml:53 +msgid "" +"<command>apt-mark</command> will change whether a package has been marked as " +"being automatically installed." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-mark.8.xml:57 +msgid "" +"When you request that a package is installed, and as a result other packages " +"are installed to satisfy its dependencies, the dependencies are marked as " +"being automatically installed. Once these automatically installed packages " +"are no longer depended on by any manually installed packages, they will be " +"removed by e.g. <command>apt-get</command> or <command>aptitude</command>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:65 +msgid "markauto" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-mark.8.xml:66 +msgid "" +"<literal>markauto</literal> is used to mark a package as being automatically " +"installed, which will cause the package to be removed when no more manually " +"installed packages depend on this package." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:73 +msgid "unmarkauto" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-mark.8.xml:74 +msgid "" +"<literal>unmarkauto</literal> is used to mark a package as being manually " +"installed, which will prevent the package from being automatically removed " +"if no other packages depend on it." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:81 +msgid "showauto" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-mark.8.xml:82 +msgid "" +"<literal>showauto</literal> is used to print a list of automatically " +"installed packages with each package on a new line." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:93 +msgid "" +"<option>-f=<filename><replaceable>FILENAME</replaceable></filename></option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:94 +msgid "" +"<option>--file=<filename><replaceable>FILENAME</replaceable></filename></" +"option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-mark.8.xml:97 +msgid "" +"Read/Write package stats from <filename><replaceable>FILENAME</replaceable></" +"filename> instead of the default location, which is " +"<filename>extended_status</filename> in the directory defined by the " +"Configuration Item: <literal>Dir::State</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:103 +msgid "<option>-h</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:104 +msgid "<option>--help</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-mark.8.xml:105 +msgid "Show a short usage summary." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:111 +msgid "<option>-v</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:112 +msgid "<option>--version</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-mark.8.xml:113 +msgid "Show the program version." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:124 +msgid "<filename>/var/lib/apt/extended_states</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-mark.8.xml:125 +msgid "" +"Status list of auto-installed packages. Configuration Item: <literal>Dir::" +"State</literal> sets the path to the <filename>extended_states</filename> " +"file." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-mark.8.xml:134 +msgid "&apt-get;,&aptitude;,&apt-conf;" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-mark.8.xml:138 +msgid "" +"<command>apt-mark</command> returns zero on normal operation, non-zero on " +"error." +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-secure.8.xml:14 apt-secure.8.xml:36 +msgid "apt-secure" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-secure.8.xml:37 +msgid "Archive authentication support for APT" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:42 +msgid "" +"Starting with version 0.6, <command>apt</command> contains code that does " +"signature checking of the Release file for all archives. This ensures that " +"packages in the archive can't be modified by people who have no access to " +"the Release file signing key." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:50 +msgid "" +"If a package comes from a archive without a signature or with a signature " +"that apt does not have a key for that package is considered untrusted and " +"installing it will result in a big warning. <command>apt-get</command> will " +"currently only warn for unsigned archives, future releases might force all " +"sources to be verified before downloading packages from them." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:59 +msgid "" +"The package frontends &apt-get;, &aptitude; and &synaptic; support this new " +"authentication feature." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-secure.8.xml:64 +msgid "Trusted archives" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:67 +msgid "" +"The chain of trust from an apt archive to the end user is made up of " +"different steps. <command>apt-secure</command> is the last step in this " +"chain, trusting an archive does not mean that the packages that you trust it " +"do not contain malicious code but means that you trust the archive " +"maintainer. It's the archive maintainer responsibility to ensure that the " +"archive integrity is correct." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:75 +msgid "" +"apt-secure does not review signatures at a package level. If you require " +"tools to do this you should look at <command>debsig-verify</command> and " +"<command>debsign</command> (provided in the debsig-verify and devscripts " +"packages respectively)." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:82 +msgid "" +"The chain of trust in Debian starts when a maintainer uploads a new package " +"or a new version of a package to the Debian archive. This upload in order to " +"become effective needs to be signed by a key of a maintainer within the " +"Debian maintainer's keyring (available in the debian-keyring package). " +"Maintainer's keys are signed by other maintainers following pre-established " +"procedures to ensure the identity of the key holder." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:92 +msgid "" +"Once the uploaded package is verified and included in the archive, the " +"maintainer signature is stripped off, an MD5 sum of the package is computed " +"and put in the Packages file. The MD5 sum of all of the packages files are " +"then computed and put into the Release file. The Release file is then signed " +"by the archive key (which is created once a year) and distributed through " +"the FTP server. This key is also on the Debian keyring." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:102 +msgid "" +"Any end user can check the signature of the Release file, extract the MD5 " +"sum of a package from it and compare it with the MD5 sum of the package he " +"downloaded. Prior to version 0.6 only the MD5 sum of the downloaded Debian " +"package was checked. Now both the MD5 sum and the signature of the Release " +"file are checked." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:109 +msgid "" +"Notice that this is distinct from checking signatures on a per package " +"basis. It is designed to prevent two possible attacks:" +msgstr "" + +#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para> +#: apt-secure.8.xml:114 +msgid "" +"<literal>Network \"man in the middle\" attacks</literal>. Without signature " +"checking, a malicious agent can introduce himself in the package download " +"process and provide malicious software either by controlling a network " +"element (router, switch, etc.) or by redirecting traffic to a rogue server " +"(through arp or DNS spoofing attacks)." +msgstr "" + +#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para> +#: apt-secure.8.xml:122 +msgid "" +"<literal>Mirror network compromise</literal>. Without signature checking, a " +"malicious agent can compromise a mirror host and modify the files in it to " +"propagate malicious software to all users downloading packages from that " +"host." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:129 +msgid "" +"However, it does not defend against a compromise of the Debian master server " +"itself (which signs the packages) or against a compromise of the key used to " +"sign the Release files. In any case, this mechanism can complement a per-" +"package signature." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-secure.8.xml:135 +#, fuzzy +msgid "User configuration" +msgstr "Plik konfiguracyjny" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:137 +msgid "" +"<command>apt-key</command> is the program that manages the list of keys used " +"by apt. It can be used to add or remove keys although an installation of " +"this release will automatically provide the default Debian archive signing " +"keys used in the Debian package repositories." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:144 +msgid "" +"In order to add a new key you need to first download it (you should make " +"sure you are using a trusted communication channel when retrieving it), add " +"it with <command>apt-key</command> and then run <command>apt-get update</" +"command> so that apt can download and verify the <filename>Release.gpg</" +"filename> files from the archives you have configured." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-secure.8.xml:153 +#, fuzzy +msgid "Archive configuration" +msgstr "Plik konfiguracyjny" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:155 +msgid "" +"If you want to provide archive signatures in an archive under your " +"maintenance you have to:" +msgstr "" + +#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para> +#: apt-secure.8.xml:160 +msgid "" +"<emphasis>Create a toplevel Release file</emphasis>, if it does not exist " +"already. You can do this by running <command>apt-ftparchive release</" +"command> (provided in apt-utils)." +msgstr "" + +#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para> +#: apt-secure.8.xml:165 +msgid "" +"<emphasis>Sign it</emphasis>. You can do this by running <command>gpg -abs -" +"o Release.gpg Release</command>." +msgstr "" + +#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para> +#: apt-secure.8.xml:168 +msgid "" +"<emphasis>Publish the key fingerprint</emphasis>, that way your users will " +"know what key they need to import in order to authenticate the files in the " +"archive." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:175 +msgid "" +"Whenever the contents of the archive changes (new packages are added or " +"removed) the archive maintainer has to follow the first two steps previously " +"outlined." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:183 +msgid "" +"&apt-conf;, &apt-get;, &sources-list;, &apt-key;, &apt-ftparchive;, " +"&debsign; &debsig-verify;, &gpg;" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:187 +msgid "" +"For more background information you might want to review the <ulink url=" +"\"http://www.debian.org/doc/manuals/securing-debian-howto/ch7.en.html" +"\">Debian Security Infrastructure</ulink> chapter of the Securing Debian " +"Manual (available also in the harden-doc package) and the <ulink url=" +"\"http://www.cryptnet.net/fdp/crypto/strong_distro.html\" >Strong " +"Distribution HOWTO</ulink> by V. Alex Brennen." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-secure.8.xml:200 +msgid "Manpage Authors" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:202 +msgid "" +"This man-page is based on the work of Javier Fernández-Sanguino Peña, Isaac " +"Jones, Colin Walters, Florian Weimer and Michael Vogt." +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-sortpkgs.1.xml:22 apt-sortpkgs.1.xml:29 +msgid "apt-sortpkgs" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-sortpkgs.1.xml:30 +msgid "Utility to sort package index files" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-sortpkgs.1.xml:36 +msgid "" +"<command>apt-sortpkgs</command> <arg><option>-hvs</option></arg> " +"<arg><option>-o=<replaceable>config string</replaceable></option></arg> " +"<arg><option>-c=<replaceable>file</replaceable></option></arg> <arg choice=" +"\"plain\" rep=\"repeat\"><replaceable>file</replaceable></arg>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-sortpkgs.1.xml:45 +msgid "" +"<command>apt-sortpkgs</command> will take an index file (Source index or " +"Package index) and sort the records so that they are ordered by the package " +"name. It will also sort the internal fields of each record according to the " +"internal sorting rules." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-sortpkgs.1.xml:51 +msgid "All output is sent to stdout, the input must be a seekable file." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-sortpkgs.1.xml:58 +msgid "<option>--source</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-sortpkgs.1.xml:60 +msgid "" +"Use Source index field ordering. Configuration Item: <literal>APT::" +"SortPkgs::Source</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-sortpkgs.1.xml:74 +msgid "" +"<command>apt-sortpkgs</command> returns zero on normal operation, decimal " +"100 on error." +msgstr "" + +#. The last update date +#. type: Content of: <refentry><refentryinfo> +#: apt.conf.5.xml:13 +msgid "" +"&apt-author.jgunthorpe; &apt-author.team; <author> <firstname>Daniel</" +"firstname> <surname>Burrows</surname> <contrib>Initial documentation of " +"Debug::*.</contrib> <email>dburrows@debian.org</email> </author> &apt-email; " +"&apt-product; <date>18 September 2009</date>" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt.conf.5.xml:28 apt.conf.5.xml:35 +msgid "apt.conf" +msgstr "" + +#. type: Content of: <refentry><refmeta><manvolnum> +#: apt.conf.5.xml:29 apt_preferences.5.xml:22 sources.list.5.xml:23 +msgid "5" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt.conf.5.xml:36 +#, fuzzy +msgid "Configuration file for APT" +msgstr "Plik konfiguracyjny" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:40 +msgid "" +"<filename>apt.conf</filename> is the main configuration file for the APT " +"suite of tools, all tools make use of the configuration file and a common " +"command line parser to provide a uniform environment. When an APT tool " +"starts up it will read the configuration specified by the <envar>APT_CONFIG</" +"envar> environment variable (if any) and then read the files in " +"<literal>Dir::Etc::Parts</literal> then read the main configuration file " +"specified by <literal>Dir::Etc::main</literal> then finally apply the " +"command line options to override the configuration directives, possibly " +"loading even more config files." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:50 +msgid "" +"The configuration file is organized in a tree with options organized into " +"functional groups. Option specification is given with a double colon " +"notation, for instance <literal>APT::Get::Assume-Yes</literal> is an option " +"within the APT tool group, for the Get tool. Options do not inherit from " +"their parent groups." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:56 +msgid "" +"Syntactically the configuration language is modeled after what the ISC tools " +"such as bind and dhcp use. Lines starting with <literal>//</literal> are " +"treated as comments (ignored), as well as all text between <literal>/*</" +"literal> and <literal>*/</literal>, just like C/C++ comments. Each line is " +"of the form <literal>APT::Get::Assume-Yes \"true\";</literal>. The trailing " +"semicolon and the quotes are required. The value must be on one line, and " +"there is no kind of string concatenation. It must not include inside " +"quotes. The behavior of the backslash \"\\\" and escaped characters inside " +"a value is undefined and it should not be used. An option name may include " +"alphanumerical characters and the \"/-:._+\" characters. A new scope can be " +"opened with curly braces, like:" +msgstr "" + +#. type: Content of: <refentry><refsect1><informalexample><programlisting> +#: apt.conf.5.xml:70 +#, no-wrap +msgid "" +"APT {\n" +" Get {\n" +" Assume-Yes \"true\";\n" +" Fix-Broken \"true\";\n" +" };\n" +"};\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:78 +msgid "" +"with newlines placed to make it more readable. Lists can be created by " +"opening a scope and including a single string enclosed in quotes followed by " +"a semicolon. Multiple entries can be included, each separated by a semicolon." +msgstr "" + +#. type: Content of: <refentry><refsect1><informalexample><programlisting> +#: apt.conf.5.xml:83 +#, no-wrap +msgid "DPkg::Pre-Install-Pkgs {\"/usr/sbin/dpkg-preconfigure --apt\";};\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:86 +msgid "" +"In general the sample configuration file in <filename>&docdir;examples/apt." +"conf</filename> &configureindex; is a good guide for how it should look." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:90 +msgid "" +"The names of the configuration items are not case-sensitive. So in the " +"previous example you could use <literal>dpkg::pre-install-pkgs</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:93 +msgid "" +"Names for the configuration items are optional if a list is defined as it " +"can be see in the <literal>DPkg::Pre-Install-Pkgs</literal> example above. " +"If you don't specify a name a new entry will simply add a new option to the " +"list. If you specify a name you can override the option as every other " +"option by reassigning a new value to the option." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:98 +msgid "" +"Two specials are allowed, <literal>#include</literal> (which is deprecated " +"and not supported by alternative implementations) and <literal>#clear</" +"literal>: <literal>#include</literal> will include the given file, unless " +"the filename ends in a slash, then the whole directory is included. " +"<literal>#clear</literal> is used to erase a part of the configuration tree. " +"The specified element and all its descendants are erased. (Note that these " +"lines also need to end with a semicolon.)" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:106 +msgid "" +"The #clear command is the only way to delete a list or a complete scope. " +"Reopening a scope or the ::-style described below will <emphasis>not</" +"emphasis> override previously written entries. Only options can be " +"overridden by addressing a new value to it - lists and scopes can't be " +"overridden, only cleared." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:111 +msgid "" +"All of the APT tools take a -o option which allows an arbitrary " +"configuration directive to be specified on the command line. The syntax is a " +"full option name (<literal>APT::Get::Assume-Yes</literal> for instance) " +"followed by an equals sign then the new value of the option. Lists can be " +"appended too by adding a trailing :: to the list name. (As you might " +"suspect: The scope syntax can't be used on the command line.)" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:118 +msgid "" +"Note that you can use :: only for appending one item per line to a list and " +"that you should not use it in combination with the scope syntax. (The scope " +"syntax implicit insert ::) Using both syntaxes together will trigger a bug " +"which some users unfortunately relay on: An option with the unusual name " +"\"<literal>::</literal>\" which acts like every other option with a name. " +"These introduces many problems including that a user who writes multiple " +"lines in this <emphasis>wrong</emphasis> syntax in the hope to append to a " +"list will gain the opposite as only the last assignment for this option " +"\"<literal>::</literal>\" will be used. Upcoming APT versions will raise " +"errors and will stop working if they encounter this misuse, so please " +"correct such statements now as long as APT doesn't complain explicit about " +"them." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt.conf.5.xml:130 +msgid "The APT Group" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:131 +msgid "" +"This group of options controls general APT behavior as well as holding the " +"options for all of the tools." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:135 +msgid "Architecture" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:136 +msgid "" +"System Architecture; sets the architecture to use when fetching files and " +"parsing package lists. The internal default is the architecture apt was " +"compiled for." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:141 +msgid "Default-Release" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:142 +msgid "" +"Default release to install packages from if more than one version available. " +"Contains release name, codename or release version. Examples: 'stable', " +"'testing', 'unstable', 'lenny', 'squeeze', '4.0', '5.0*'. See also &apt-" +"preferences;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:146 +msgid "Ignore-Hold" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:147 +msgid "" +"Ignore Held packages; This global option causes the problem resolver to " +"ignore held packages in its decision making." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:151 +msgid "Clean-Installed" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:152 +msgid "" +"Defaults to on. When turned on the autoclean feature will remove any " +"packages which can no longer be downloaded from the cache. If turned off " +"then packages that are locally installed are also excluded from cleaning - " +"but note that APT provides no direct means to reinstall them." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:158 +msgid "Immediate-Configure" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:159 +msgid "" +"Defaults to on which will cause APT to install essential and important " +"packages as fast as possible in the install/upgrade operation. This is done " +"to limit the effect of a failing &dpkg; call: If this option is disabled APT " +"does treat an important package in the same way as an extra package: Between " +"the unpacking of the important package A and his configuration can then be " +"many other unpack or configuration calls, e.g. for package B which has no " +"relation to A, but causes the dpkg call to fail (e.g. because maintainer " +"script of package B generates an error) which results in a system state in " +"which package A is unpacked but unconfigured - each package depending on A " +"is now no longer guaranteed to work as their dependency on A is not longer " +"satisfied. The immediate configuration marker is also applied to all " +"dependencies which can generate a problem if the dependencies e.g. form a " +"circle as a dependency with the immediate flag is comparable with a Pre-" +"Dependency. So in theory it is possible that APT encounters a situation in " +"which it is unable to perform immediate configuration, error out and refers " +"to this option so the user can deactivate the immediate configuration " +"temporary to be able to perform an install/upgrade again. Note the use of " +"the word \"theory\" here as this problem was only encountered by now in real " +"world a few times in non-stable distribution versions and caused by wrong " +"dependencies of the package in question or by a system in an already broken " +"state, so you should not blindly disable this option as the mentioned " +"scenario above is not the only problem immediate configuration can help to " +"prevent in the first place. Before a big operation like <literal>dist-" +"upgrade</literal> is run with this option disabled it should be tried to " +"explicitly <literal>install</literal> the package APT is unable to configure " +"immediately, but please make sure to report your problem also to your " +"distribution and to the APT team with the buglink below so they can work on " +"improving or correcting the upgrade process." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:181 +msgid "Force-LoopBreak" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:182 +msgid "" +"Never Enable this option unless you -really- know what you are doing. It " +"permits APT to temporarily remove an essential package to break a Conflicts/" +"Conflicts or Conflicts/Pre-Depend loop between two essential packages. SUCH " +"A LOOP SHOULD NEVER EXIST AND IS A GRAVE BUG. This option will work if the " +"essential packages are not tar, gzip, libc, dpkg, bash or anything that " +"those packages depend on." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:190 +msgid "Cache-Limit" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:191 +msgid "" +"APT uses a fixed size memory mapped cache file to store the 'available' " +"information. This sets the size of that cache (in bytes)." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:195 +msgid "Build-Essential" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:196 +msgid "Defines which package(s) are considered essential build dependencies." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:199 +msgid "Get" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:200 +msgid "" +"The Get subsection controls the &apt-get; tool, please see its documentation " +"for more information about the options here." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:204 +msgid "Cache" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:205 +msgid "" +"The Cache subsection controls the &apt-cache; tool, please see its " +"documentation for more information about the options here." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:209 +msgid "CDROM" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:210 +msgid "" +"The CDROM subsection controls the &apt-cdrom; tool, please see its " +"documentation for more information about the options here." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt.conf.5.xml:216 +msgid "The Acquire Group" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:221 +msgid "PDiffs" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:222 +msgid "" +"Try to download deltas called <literal>PDiffs</literal> for Packages or " +"Sources files instead of downloading whole ones. True by default." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:227 +msgid "Queue-Mode" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:228 +msgid "" +"Queuing mode; <literal>Queue-Mode</literal> can be one of <literal>host</" +"literal> or <literal>access</literal> which determines how APT parallelizes " +"outgoing connections. <literal>host</literal> means that one connection per " +"target host will be opened, <literal>access</literal> means that one " +"connection per URI type will be opened." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:235 +msgid "Retries" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:236 +msgid "" +"Number of retries to perform. If this is non-zero APT will retry failed " +"files the given number of times." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:240 +msgid "Source-Symlinks" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:241 +msgid "" +"Use symlinks for source archives. If set to true then source archives will " +"be symlinked when possible instead of copying. True is the default." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:245 sources.list.5.xml:139 +msgid "http" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:246 +msgid "" +"HTTP URIs; http::Proxy is the default http proxy to use. It is in the " +"standard form of <literal>http://[[user][:pass]@]host[:port]/</literal>. Per " +"host proxies can also be specified by using the form <literal>http::Proxy::" +"<host></literal> with the special keyword <literal>DIRECT</literal> " +"meaning to use no proxies. If no one of the above settings is specified, " +"<envar>http_proxy</envar> environment variable will be used." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:254 +msgid "" +"Three settings are provided for cache control with HTTP/1.1 compliant proxy " +"caches. <literal>No-Cache</literal> tells the proxy to not use its cached " +"response under any circumstances, <literal>Max-Age</literal> is sent only " +"for index files and tells the cache to refresh its object if it is older " +"than the given number of seconds. Debian updates its index files daily so " +"the default is 1 day. <literal>No-Store</literal> specifies that the cache " +"should never store this request, it is only set for archive files. This may " +"be useful to prevent polluting a proxy cache with very large .deb files. " +"Note: Squid 2.0.2 does not support any of these options." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:264 apt.conf.5.xml:321 +msgid "" +"The option <literal>timeout</literal> sets the timeout timer used by the " +"method, this applies to all things including connection timeout and data " +"timeout." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:267 +msgid "" +"One setting is provided to control the pipeline depth in cases where the " +"remote server is not RFC conforming or buggy (such as Squid 2.0.2). " +"<literal>Acquire::http::Pipeline-Depth</literal> can be a value from 0 to 5 " +"indicating how many outstanding requests APT should send. A value of zero " +"MUST be specified if the remote host does not properly linger on TCP " +"connections - otherwise data corruption will occur. Hosts which require this " +"are in violation of RFC 2068." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:275 +msgid "" +"The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</" +"literal> which accepts integer values in kilobyte. The default value is 0 " +"which deactivates the limit and tries uses as much as possible of the " +"bandwidth (Note that this option implicit deactivates the download from " +"multiple servers at the same time.)" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:281 +msgid "https" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:282 +msgid "" +"HTTPS URIs. Cache-control and proxy options are the same as for " +"<literal>http</literal> method. <literal>Pipeline-Depth</literal> option is " +"not supported yet." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:286 +msgid "" +"<literal>CaInfo</literal> suboption specifies place of file that holds info " +"about trusted certificates. <literal><host>::CaInfo</literal> is " +"corresponding per-host option. <literal>Verify-Peer</literal> boolean " +"suboption determines whether verify server's host certificate against " +"trusted certificates or not. <literal><host>::Verify-Peer</literal> " +"is corresponding per-host option. <literal>Verify-Host</literal> boolean " +"suboption determines whether verify server's hostname or not. <literal><" +"host>::Verify-Host</literal> is corresponding per-host option. " +"<literal>SslCert</literal> determines what certificate to use for client " +"authentication. <literal><host>::SslCert</literal> is corresponding " +"per-host option. <literal>SslKey</literal> determines what private key to " +"use for client authentication. <literal><host>::SslKey</literal> is " +"corresponding per-host option. <literal>SslForceVersion</literal> overrides " +"default SSL version to use. Can contain 'TLSv1' or 'SSLv3' string. " +"<literal><host>::SslForceVersion</literal> is corresponding per-host " +"option." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:304 sources.list.5.xml:150 +msgid "ftp" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:305 +msgid "" +"FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the standard " +"form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. Per host " +"proxies can also be specified by using the form <literal>ftp::Proxy::<" +"host></literal> with the special keyword <literal>DIRECT</literal> " +"meaning to use no proxies. If no one of the above settings is specified, " +"<envar>ftp_proxy</envar> environment variable will be used. To use a ftp " +"proxy you will have to set the <literal>ftp::ProxyLogin</literal> script in " +"the configuration file. This entry specifies the commands to send to tell " +"the proxy server what to connect to. Please see &configureindex; for an " +"example of how to do this. The substitution variables available are <literal>" +"$(PROXY_USER)</literal> <literal>$(PROXY_PASS)</literal> <literal>" +"$(SITE_USER)</literal> <literal>$(SITE_PASS)</literal> <literal>$(SITE)</" +"literal> and <literal>$(SITE_PORT)</literal> Each is taken from it's " +"respective URI component." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:324 +msgid "" +"Several settings are provided to control passive mode. Generally it is safe " +"to leave passive mode on, it works in nearly every environment. However " +"some situations require that passive mode be disabled and port mode ftp used " +"instead. This can be done globally, for connections that go through a proxy " +"or for a specific host (See the sample config file for examples)." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:331 +msgid "" +"It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</" +"envar> environment variable to a http url - see the discussion of the http " +"method above for syntax. You cannot set this in the configuration file and " +"it is not recommended to use FTP over HTTP due to its low efficiency." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:336 +msgid "" +"The setting <literal>ForceExtended</literal> controls the use of RFC2428 " +"<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is " +"false, which means these commands are only used if the control connection is " +"IPv6. Setting this to true forces their use even on IPv4 connections. Note " +"that most FTP servers do not support RFC2428." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:343 sources.list.5.xml:132 +msgid "cdrom" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> +#: apt.conf.5.xml:349 +#, no-wrap +msgid "/cdrom/::Mount \"foo\";" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:344 +msgid "" +"CDROM URIs; the only setting for CDROM URIs is the mount point, " +"<literal>cdrom::Mount</literal> which must be the mount point for the CDROM " +"drive as specified in <filename>/etc/fstab</filename>. It is possible to " +"provide alternate mount and unmount commands if your mount point cannot be " +"listed in the fstab (such as an SMB mount and old mount packages). The " +"syntax is to put <placeholder type=\"literallayout\" id=\"0\"/> within the " +"cdrom block. It is important to have the trailing slash. Unmount commands " +"can be specified using UMount." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:354 +msgid "gpgv" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:355 +msgid "" +"GPGV URIs; the only option for GPGV URIs is the option to pass additional " +"parameters to gpgv. <literal>gpgv::Options</literal> Additional options " +"passed to gpgv." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:360 +msgid "CompressionTypes" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> +#: apt.conf.5.xml:366 +#, no-wrap +msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:361 +msgid "" +"List of compression types which are understood by the acquire methods. " +"Files like <filename>Packages</filename> can be available in various " +"compression formats. Per default the acquire methods can decompress " +"<command>bzip2</command>, <command>lzma</command> and <command>gzip</" +"command> compressed files, with this setting more formats can be added on " +"the fly or the used method can be changed. The syntax for this is: " +"<placeholder type=\"synopsis\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> +#: apt.conf.5.xml:371 +#, no-wrap +msgid "Acquire::CompressionTypes::Order:: \"gz\";" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> +#: apt.conf.5.xml:374 +#, no-wrap +msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:367 +msgid "" +"Also the <literal>Order</literal> subgroup can be used to define in which " +"order the acquire system will try to download the compressed files. The " +"acquire system will try the first and proceed with the next compression type " +"in this list on error, so to prefer one over the other type simple add the " +"preferred type at first - not already added default types will be added at " +"run time to the end of the list, so e.g. <placeholder type=\"synopsis\" id=" +"\"0\"/> can be used to prefer <command>gzip</command> compressed files over " +"<command>bzip2</command> and <command>lzma</command>. If <command>lzma</" +"command> should be preferred over <command>gzip</command> and " +"<command>bzip2</command> the configure setting should look like this " +"<placeholder type=\"synopsis\" id=\"1\"/> It is not needed to add " +"<literal>bz2</literal> explicit to the list as it will be added automatic." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> +#: apt.conf.5.xml:378 +#, no-wrap +msgid "Dir::Bin::bzip2 \"/bin/bzip2\";" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:376 +msgid "" +"Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</" +"replaceable></literal> will be checked: If this setting exists the method " +"will only be used if this file exists, e.g. for the bzip2 method (the " +"inbuilt) setting is <placeholder type=\"literallayout\" id=\"0\"/> Note also " +"that list entries specified on the command line will be added at the end of " +"the list specified in the configuration files, but before the default " +"entries. To prefer a type in this case over the ones specified in in the " +"configuration files you can set the option direct - not in list style. This " +"will not override the defined list, it will only prefix the list with this " +"type." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:383 +msgid "" +"While it is possible to add an empty compression type to the order list, but " +"APT in its current version doesn't understand it correctly and will display " +"many warnings about not downloaded files - these warnings are most of the " +"time false negatives. Future versions will maybe include a way to really " +"prefer uncompressed files to support the usage of local mirrors." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:217 +msgid "" +"The <literal>Acquire</literal> group of options controls the download of " +"packages and the URI handlers. <placeholder type=\"variablelist\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt.conf.5.xml:392 +msgid "Directories" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:394 +msgid "" +"The <literal>Dir::State</literal> section has directories that pertain to " +"local state information. <literal>lists</literal> is the directory to place " +"downloaded package lists in and <literal>status</literal> is the name of the " +"dpkg status file. <literal>preferences</literal> is the name of the APT " +"preferences file. <literal>Dir::State</literal> contains the default " +"directory to prefix on all sub items if they do not start with <filename>/</" +"filename> or <filename>./</filename>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:401 +msgid "" +"<literal>Dir::Cache</literal> contains locations pertaining to local cache " +"information, such as the two package caches <literal>srcpkgcache</literal> " +"and <literal>pkgcache</literal> as well as the location to place downloaded " +"archives, <literal>Dir::Cache::archives</literal>. Generation of caches can " +"be turned off by setting their names to be blank. This will slow down " +"startup but save disk space. It is probably preferred to turn off the " +"pkgcache rather than the srcpkgcache. Like <literal>Dir::State</literal> the " +"default directory is contained in <literal>Dir::Cache</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:410 +msgid "" +"<literal>Dir::Etc</literal> contains the location of configuration files, " +"<literal>sourcelist</literal> gives the location of the sourcelist and " +"<literal>main</literal> is the default configuration file (setting has no " +"effect, unless it is done from the config file specified by " +"<envar>APT_CONFIG</envar>)." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:416 +msgid "" +"The <literal>Dir::Parts</literal> setting reads in all the config fragments " +"in lexical order from the directory specified. After this is done then the " +"main config file is loaded." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:420 +msgid "" +"Binary programs are pointed to by <literal>Dir::Bin</literal>. <literal>Dir::" +"Bin::Methods</literal> specifies the location of the method handlers and " +"<literal>gzip</literal>, <literal>bzip2</literal>, <literal>lzma</literal>, " +"<literal>dpkg</literal>, <literal>apt-get</literal> <literal>dpkg-source</" +"literal> <literal>dpkg-buildpackage</literal> and <literal>apt-cache</" +"literal> specify the location of the respective programs." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:428 +msgid "" +"The configuration item <literal>RootDir</literal> has a special meaning. If " +"set, all paths in <literal>Dir::</literal> will be relative to " +"<literal>RootDir</literal>, <emphasis>even paths that are specified " +"absolutely</emphasis>. So, for instance, if <literal>RootDir</literal> is " +"set to <filename>/tmp/staging</filename> and <literal>Dir::State::status</" +"literal> is set to <filename>/var/lib/dpkg/status</filename>, then the " +"status file will be looked up in <filename>/tmp/staging/var/lib/dpkg/status</" +"filename>." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt.conf.5.xml:441 +msgid "APT in DSelect" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:443 +msgid "" +"When APT is used as a &dselect; method several configuration directives " +"control the default behaviour. These are in the <literal>DSelect</literal> " +"section." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:447 +msgid "Clean" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:448 +msgid "" +"Cache Clean mode; this value may be one of always, prompt, auto, pre-auto " +"and never. always and prompt will remove all packages from the cache after " +"upgrading, prompt (the default) does so conditionally. auto removes only " +"those packages which are no longer downloadable (replaced with a new version " +"for instance). pre-auto performs this action before downloading new " +"packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:457 +msgid "" +"The contents of this variable is passed to &apt-get; as command line options " +"when it is run for the install phase." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:461 +msgid "Updateoptions" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:462 +msgid "" +"The contents of this variable is passed to &apt-get; as command line options " +"when it is run for the update phase." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:466 +msgid "PromptAfterUpdate" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:467 +msgid "" +"If true the [U]pdate operation in &dselect; will always prompt to continue. " +"The default is to prompt only on error." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt.conf.5.xml:473 +msgid "How APT calls dpkg" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:474 +msgid "" +"Several configuration directives control how APT invokes &dpkg;. These are " +"in the <literal>DPkg</literal> section." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:479 +msgid "" +"This is a list of options to pass to dpkg. The options must be specified " +"using the list notation and each list item is passed as a single argument to " +"&dpkg;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:484 +msgid "Pre-Invoke" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:484 +msgid "Post-Invoke" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:485 +msgid "" +"This is a list of shell commands to run before/after invoking &dpkg;. Like " +"<literal>options</literal> this must be specified in list notation. The " +"commands are invoked in order using <filename>/bin/sh</filename>, should any " +"fail APT will abort." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:491 +msgid "Pre-Install-Pkgs" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:492 +msgid "" +"This is a list of shell commands to run before invoking dpkg. Like " +"<literal>options</literal> this must be specified in list notation. The " +"commands are invoked in order using <filename>/bin/sh</filename>, should any " +"fail APT will abort. APT will pass to the commands on standard input the " +"filenames of all .deb files it is going to install, one per line." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:498 +msgid "" +"Version 2 of this protocol dumps more information, including the protocol " +"version, the APT configuration space and the packages, files and versions " +"being changed. Version 2 is enabled by setting <literal>DPkg::Tools::" +"options::cmd::Version</literal> to 2. <literal>cmd</literal> is a command " +"given to <literal>Pre-Install-Pkgs</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:505 +msgid "Run-Directory" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:506 +msgid "" +"APT chdirs to this directory before invoking dpkg, the default is <filename>/" +"</filename>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:510 +msgid "Build-options" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:511 +msgid "" +"These options are passed to &dpkg-buildpackage; when compiling packages, the " +"default is to disable signing and produce all binaries." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt.conf.5.xml:516 +msgid "dpkg trigger usage (and related options)" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt.conf.5.xml:517 +msgid "" +"APT can call dpkg in a way so it can make aggressive use of triggers over " +"multiply calls of dpkg. Without further options dpkg will use triggers only " +"in between his own run. Activating these options can therefore decrease the " +"time needed to perform the install / upgrade. Note that it is intended to " +"activate these options per default in the future, but as it changes the way " +"APT calling dpkg drastically it needs a lot more testing. <emphasis>These " +"options are therefore currently experimental and should not be used in " +"productive environments.</emphasis> Also it breaks the progress reporting so " +"all frontends will currently stay around half (or more) of the time in the " +"100% state while it actually configures all packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><literallayout> +#: apt.conf.5.xml:532 +#, no-wrap +msgid "" +"DPkg::NoTriggers \"true\";\n" +"PackageManager::Configure \"smart\";\n" +"DPkg::ConfigurePending \"true\";\n" +"DPkg::TriggersPending \"true\";" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt.conf.5.xml:526 +msgid "" +"Note that it is not guaranteed that APT will support these options or that " +"these options will not cause (big) trouble in the future. If you have " +"understand the current risks and problems with these options, but are brave " +"enough to help testing them create a new configuration file and test a " +"combination of options. Please report any bugs, problems and improvements " +"you encounter and make sure to note which options you have used in your " +"reports. Asking dpkg for help could also be useful for debugging proposes, " +"see e.g. <command>dpkg --audit</command>. A defensive option combination " +"would be <placeholder type=\"literallayout\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt.conf.5.xml:538 +msgid "DPkg::NoTriggers" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:539 +msgid "" +"Add the no triggers flag to all dpkg calls (except the ConfigurePending " +"call). See &dpkg; if you are interested in what this actually means. In " +"short: dpkg will not run the triggers when this flag is present unless it is " +"explicitly called to do so in an extra call. Note that this option exists " +"(undocumented) also in older apt versions with a slightly different meaning: " +"Previously these option only append --no-triggers to the configure calls to " +"dpkg - now apt will add these flag also to the unpack and remove calls." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt.conf.5.xml:546 +msgid "PackageManager::Configure" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:547 +msgid "" +"Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " +"and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default " +"value and causes APT to configure all packages explicit. The " +"\"<literal>smart</literal>\" way is it to configure only packages which need " +"to be configured before another package can be unpacked (Pre-Depends) and " +"let the rest configure by dpkg with a call generated by the next option. " +"\"<literal>no</literal>\" on the other hand will not configure anything and " +"totally rely on dpkg for configuration (which will at the moment fail if a " +"Pre-Depends is encountered). Setting this option to another than the all " +"value will implicitly activate also the next option per default as otherwise " +"the system could end in an unconfigured status which could be unbootable!" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt.conf.5.xml:557 +msgid "DPkg::ConfigurePending" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:558 +msgid "" +"If this option is set apt will call <command>dpkg --configure --pending</" +"command> to let dpkg handle all required configurations and triggers. This " +"option is activated automatic per default if the previous option is not set " +"to <literal>all</literal>, but deactivating could be useful if you want to " +"run APT multiple times in a row - e.g. in an installer. In these sceneries " +"you could deactivate this option in all but the last run." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt.conf.5.xml:564 +msgid "DPkg::TriggersPending" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:565 +msgid "" +"Useful for <literal>smart</literal> configuration as a package which has " +"pending triggers is not considered as <literal>installed</literal> and dpkg " +"treats them as <literal>unpacked</literal> currently which is a dealbreaker " +"for Pre-Dependencies (see debbugs #526774). Note that this will process all " +"triggers, not only the triggers needed to configure this package." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt.conf.5.xml:570 +msgid "PackageManager::UnpackAll" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:571 +msgid "" +"As the configuration can be deferred to be done at the end by dpkg it can be " +"tried to order the unpack series only by critical needs, e.g. by Pre-" +"Depends. Default is true and therefore the \"old\" method of ordering in " +"various steps by everything. While both method were present in earlier APT " +"versions the <literal>OrderCritical</literal> method was unused, so this " +"method is very experimental and needs further improvements before becoming " +"really useful." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt.conf.5.xml:578 +msgid "OrderList::Score::Immediate" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout> +#: apt.conf.5.xml:586 +#, no-wrap +msgid "" +"OrderList::Score {\n" +"\tDelete 500;\n" +"\tEssential 200;\n" +"\tImmediate 10;\n" +"\tPreDepends 50;\n" +"};" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:579 +msgid "" +"Essential packages (and there dependencies) should be configured immediately " +"after unpacking. It will be a good idea to do this quite early in the " +"upgrade process as these these configure calls require currently also " +"<literal>DPkg::TriggersPending</literal> which will run quite a few triggers " +"(which maybe not needed). Essentials get per default a high score but the " +"immediate flag is relatively low (a package which has a Pre-Depends is " +"higher rated). These option and the others in the same group can be used to " +"change the scoring. The following example shows the settings with there " +"default values. <placeholder type=\"literallayout\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt.conf.5.xml:599 +msgid "Periodic and Archives options" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:600 +msgid "" +"<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups " +"of options configure behavior of apt periodic updates, which is done by " +"<literal>/etc/cron.daily/apt</literal> script. See header of this script for " +"the brief documentation of these options." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt.conf.5.xml:608 +msgid "Debug options" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:610 +msgid "" +"Enabling options in the <literal>Debug::</literal> section will cause " +"debugging information to be sent to the standard error stream of the program " +"utilizing the <literal>apt</literal> libraries, or enable special program " +"modes that are primarily useful for debugging the behavior of <literal>apt</" +"literal>. Most of these options are not interesting to a normal user, but a " +"few may be:" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> +#: apt.conf.5.xml:621 +msgid "" +"<literal>Debug::pkgProblemResolver</literal> enables output about the " +"decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</" +"literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> +#: apt.conf.5.xml:629 +msgid "" +"<literal>Debug::NoLocking</literal> disables all file locking. This can be " +"used to run some operations (for instance, <literal>apt-get -s install</" +"literal>) as a non-root user." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> +#: apt.conf.5.xml:638 +msgid "" +"<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each " +"time that <literal>apt</literal> invokes &dpkg;." +msgstr "" + +#. TODO: provide a +#. motivating example, except I haven't a clue why you'd want +#. to do this. +#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> +#: apt.conf.5.xml:646 +msgid "" +"<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data " +"in CDROM IDs." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:656 +msgid "A full list of debugging options to apt follows." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:661 +msgid "<literal>Debug::Acquire::cdrom</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:665 +msgid "" +"Print information related to accessing <literal>cdrom://</literal> sources." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:672 +msgid "<literal>Debug::Acquire::ftp</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:676 +msgid "Print information related to downloading packages using FTP." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:683 +msgid "<literal>Debug::Acquire::http</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:687 +msgid "Print information related to downloading packages using HTTP." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:694 +msgid "<literal>Debug::Acquire::https</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:698 +msgid "Print information related to downloading packages using HTTPS." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:705 +msgid "<literal>Debug::Acquire::gpgv</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:709 +msgid "" +"Print information related to verifying cryptographic signatures using " +"<literal>gpg</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:716 +msgid "<literal>Debug::aptcdrom</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:720 +msgid "" +"Output information about the process of accessing collections of packages " +"stored on CD-ROMs." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:727 +msgid "<literal>Debug::BuildDeps</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:730 +msgid "Describes the process of resolving build-dependencies in &apt-get;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:737 +msgid "<literal>Debug::Hashes</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:740 +msgid "" +"Output each cryptographic hash that is generated by the <literal>apt</" +"literal> libraries." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:747 +msgid "<literal>Debug::IdentCDROM</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:750 +msgid "" +"Do not include information from <literal>statfs</literal>, namely the number " +"of used and free blocks on the CD-ROM filesystem, when generating an ID for " +"a CD-ROM." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:758 +msgid "<literal>Debug::NoLocking</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:761 +msgid "" +"Disable all file locking. For instance, this will allow two instances of " +"<quote><literal>apt-get update</literal></quote> to run at the same time." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:769 +msgid "<literal>Debug::pkgAcquire</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:773 +msgid "Log when items are added to or removed from the global download queue." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:780 +msgid "<literal>Debug::pkgAcquire::Auth</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:783 +msgid "" +"Output status messages and errors related to verifying checksums and " +"cryptographic signatures of downloaded files." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:790 +msgid "<literal>Debug::pkgAcquire::Diffs</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:793 +msgid "" +"Output information about downloading and applying package index list diffs, " +"and errors relating to package index list diffs." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:801 +msgid "<literal>Debug::pkgAcquire::RRed</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:805 +msgid "" +"Output information related to patching apt package lists when downloading " +"index diffs instead of full indices." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:812 +msgid "<literal>Debug::pkgAcquire::Worker</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:816 +msgid "" +"Log all interactions with the sub-processes that actually perform downloads." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:823 +msgid "<literal>Debug::pkgAutoRemove</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:827 +msgid "" +"Log events related to the automatically-installed status of packages and to " +"the removal of unused packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:834 +msgid "<literal>Debug::pkgDepCache::AutoInstall</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:837 +msgid "" +"Generate debug messages describing which packages are being automatically " +"installed to resolve dependencies. This corresponds to the initial auto-" +"install pass performed in, e.g., <literal>apt-get install</literal>, and not " +"to the full <literal>apt</literal> dependency resolver; see <literal>Debug::" +"pkgProblemResolver</literal> for that." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:848 +msgid "<literal>Debug::pkgDepCache::Marker</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:851 +msgid "" +"Generate debug messages describing which package is marked as keep/install/" +"remove while the ProblemResolver does his work. Each addition or deletion " +"may trigger additional actions; they are shown indented two additional space " +"under the original entry. The format for each line is <literal>MarkKeep</" +"literal>, <literal>MarkDelete</literal> or <literal>MarkInstall</literal> " +"followed by <literal>package-name <a.b.c -> d.e.f | x.y.z> (section)" +"</literal> where <literal>a.b.c</literal> is the current version of the " +"package, <literal>d.e.f</literal> is the version considered for installation " +"and <literal>x.y.z</literal> is a newer version, but not considered for " +"installation (because of a low pin score). The later two can be omitted if " +"there is none or if it is the same version as the installed. " +"<literal>section</literal> is the name of the section the package appears in." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:870 +msgid "<literal>Debug::pkgInitConfig</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:873 +msgid "Dump the default configuration to standard error on startup." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:880 +msgid "<literal>Debug::pkgDPkgPM</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:883 +msgid "" +"When invoking &dpkg;, output the precise command line with which it is being " +"invoked, with arguments separated by a single space character." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:891 +msgid "<literal>Debug::pkgDPkgProgressReporting</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:894 +msgid "" +"Output all the data received from &dpkg; on the status file descriptor and " +"any errors encountered while parsing it." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:901 +msgid "<literal>Debug::pkgOrderList</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:905 +msgid "" +"Generate a trace of the algorithm that decides the order in which " +"<literal>apt</literal> should pass packages to &dpkg;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:913 +msgid "<literal>Debug::pkgPackageManager</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:917 +msgid "" +"Output status messages tracing the steps performed when invoking &dpkg;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:924 +msgid "<literal>Debug::pkgPolicy</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:928 +msgid "Output the priority of each package list on startup." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:934 +msgid "<literal>Debug::pkgProblemResolver</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:938 +msgid "" +"Trace the execution of the dependency resolver (this applies only to what " +"happens when a complex dependency problem is encountered)." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:946 +msgid "<literal>Debug::pkgProblemResolver::ShowScores</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:949 +msgid "" +"Display a list of all installed packages with their calculated score used by " +"the pkgProblemResolver. The description of the package is the same as " +"described in <literal>Debug::pkgDepCache::Marker</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:957 +msgid "<literal>Debug::sourceList</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:961 +msgid "" +"Print information about the vendors read from <filename>/etc/apt/vendors." +"list</filename>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:983 +msgid "" +"&configureindex; is a configuration file showing example values for all " +"possible options." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist> +#: apt.conf.5.xml:990 +msgid "&file-aptconf;" +msgstr "" + +#. ? reading apt.conf +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:995 +msgid "&apt-cache;, &apt-config;, &apt-preferences;." +msgstr "" + +#. The last update date +#. type: Content of: <refentry><refentryinfo> +#: apt_preferences.5.xml:13 +msgid "&apt-author.team; &apt-email; &apt-product; <date>04 May 2009</date>" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt_preferences.5.xml:21 apt_preferences.5.xml:28 +msgid "apt_preferences" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt_preferences.5.xml:29 +msgid "Preference control file for APT" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt_preferences.5.xml:34 +msgid "" +"The APT preferences file <filename>/etc/apt/preferences</filename> and the " +"fragment files in the <filename>/etc/apt/preferences.d/</filename> folder " +"can be used to control which versions of packages will be selected for " +"installation." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt_preferences.5.xml:39 +msgid "" +"Several versions of a package may be available for installation when the " +"&sources-list; file contains references to more than one distribution (for " +"example, <literal>stable</literal> and <literal>testing</literal>). APT " +"assigns a priority to each version that is available. Subject to dependency " +"constraints, <command>apt-get</command> selects the version with the highest " +"priority for installation. The APT preferences file overrides the " +"priorities that APT assigns to package versions by default, thus giving the " +"user control over which one is selected for installation." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt_preferences.5.xml:49 +msgid "" +"Several instances of the same version of a package may be available when the " +"&sources-list; file contains references to more than one source. In this " +"case <command>apt-get</command> downloads the instance listed earliest in " +"the &sources-list; file. The APT preferences file does not affect the " +"choice of instance, only the choice of version." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:56 +msgid "APT's Default Priority Assignments" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:71 +#, no-wrap +msgid "<command>apt-get install -t testing <replaceable>some-package</replaceable></command>\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:74 +#, no-wrap +msgid "APT::Default-Release \"stable\";\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:58 +msgid "" +"If there is no preferences file or if there is no entry in the file that " +"applies to a particular version then the priority assigned to that version " +"is the priority of the distribution to which that version belongs. It is " +"possible to single out a distribution, \"the target release\", which " +"receives a higher priority than other distributions do by default. The " +"target release can be set on the <command>apt-get</command> command line or " +"in the APT configuration file <filename>/etc/apt/apt.conf</filename>. Note " +"that this has precedence over any general priority you set in the <filename>/" +"etc/apt/preferences</filename> file described later, but not over " +"specifically pinned packages. For example, <placeholder type=" +"\"programlisting\" id=\"0\"/> <placeholder type=\"programlisting\" id=\"1\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:83 +msgid "priority 100" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:84 +msgid "to the version that is already installed (if any)." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:88 +msgid "priority 500" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:89 +msgid "" +"to the versions that are not installed and do not belong to the target " +"release." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:93 +msgid "priority 990" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:94 +msgid "" +"to the versions that are not installed and belong to the target release." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:78 +msgid "" +"If the target release has been specified then APT uses the following " +"algorithm to set the priorities of the versions of a package. Assign: " +"<placeholder type=\"variablelist\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:99 +msgid "" +"If the target release has not been specified then APT simply assigns " +"priority 100 to all installed package versions and priority 500 to all " +"uninstalled package versions." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:103 +msgid "" +"APT then applies the following rules, listed in order of precedence, to " +"determine which version of a package to install." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:106 +msgid "" +"Never downgrade unless the priority of an available version exceeds 1000. " +"(\"Downgrading\" is installing a less recent version of a package in place " +"of a more recent version. Note that none of APT's default priorities " +"exceeds 1000; such high priorities can only be set in the preferences file. " +"Note also that downgrading a package can be risky.)" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:112 +msgid "Install the highest priority version." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:113 +msgid "" +"If two or more versions have the same priority, install the most recent one " +"(that is, the one with the higher version number)." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:116 +msgid "" +"If two or more versions have the same priority and version number but either " +"the packages differ in some of their metadata or the <literal>--reinstall</" +"literal> option is given, install the uninstalled one." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:122 +msgid "" +"In a typical situation, the installed version of a package (priority 100) " +"is not as recent as one of the versions available from the sources listed in " +"the &sources-list; file (priority 500 or 990). Then the package will be " +"upgraded when <command>apt-get install <replaceable>some-package</" +"replaceable></command> or <command>apt-get upgrade</command> is executed." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:129 +msgid "" +"More rarely, the installed version of a package is <emphasis>more</emphasis> " +"recent than any of the other available versions. The package will not be " +"downgraded when <command>apt-get install <replaceable>some-package</" +"replaceable></command> or <command>apt-get upgrade</command> is executed." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:134 +msgid "" +"Sometimes the installed version of a package is more recent than the version " +"belonging to the target release, but not as recent as a version belonging to " +"some other distribution. Such a package will indeed be upgraded when " +"<command>apt-get install <replaceable>some-package</replaceable></command> " +"or <command>apt-get upgrade</command> is executed, because at least " +"<emphasis>one</emphasis> of the available versions has a higher priority " +"than the installed version." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:143 +msgid "The Effect of APT Preferences" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:145 +msgid "" +"The APT preferences file allows the system administrator to control the " +"assignment of priorities. The file consists of one or more multi-line " +"records separated by blank lines. Records can have one of two forms, a " +"specific form and a general form." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:151 +msgid "" +"The specific form assigns a priority (a \"Pin-Priority\") to one or more " +"specified packages and specified version or version range. For example, the " +"following record assigns a high priority to all versions of the " +"<filename>perl</filename> package whose version number begins with " +"\"<literal>5.8</literal>\". Multiple packages can be separated by spaces." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting> +#: apt_preferences.5.xml:158 +#, no-wrap +msgid "" +"Package: perl\n" +"Pin: version 5.8*\n" +"Pin-Priority: 1001\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:164 +msgid "" +"The general form assigns a priority to all of the package versions in a " +"given distribution (that is, to all the versions of packages that are listed " +"in a certain <filename>Release</filename> file) or to all of the package " +"versions coming from a particular Internet site, as identified by the site's " +"fully qualified domain name." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:170 +msgid "" +"This general-form entry in the APT preferences file applies only to groups " +"of packages. For example, the following record assigns a high priority to " +"all package versions available from the local site." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting> +#: apt_preferences.5.xml:175 +#, no-wrap +msgid "" +"Package: *\n" +"Pin: origin \"\"\n" +"Pin-Priority: 999\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:180 +msgid "" +"A note of caution: the keyword used here is \"<literal>origin</literal>\". " +"This should not be confused with the Origin of a distribution as specified " +"in a <filename>Release</filename> file. What follows the \"Origin:\" tag in " +"a <filename>Release</filename> file is not an Internet address but an author " +"or vendor name, such as \"Debian\" or \"Ximian\"." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:186 +msgid "" +"The following record assigns a low priority to all package versions " +"belonging to any distribution whose Archive name is \"<literal>unstable</" +"literal>\"." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting> +#: apt_preferences.5.xml:190 +#, no-wrap +msgid "" +"Package: *\n" +"Pin: release a=unstable\n" +"Pin-Priority: 50\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:195 +msgid "" +"The following record assigns a high priority to all package versions " +"belonging to any distribution whose Codename is \"<literal>squeeze</literal>" +"\"." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting> +#: apt_preferences.5.xml:199 +#, no-wrap +msgid "" +"Package: *\n" +"Pin: release n=squeeze\n" +"Pin-Priority: 900\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:204 +msgid "" +"The following record assigns a high priority to all package versions " +"belonging to any release whose Archive name is \"<literal>stable</literal>\" " +"and whose release Version number is \"<literal>3.0</literal>\"." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting> +#: apt_preferences.5.xml:209 +#, no-wrap +msgid "" +"Package: *\n" +"Pin: release a=stable, v=3.0\n" +"Pin-Priority: 500\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:220 +msgid "How APT Interprets Priorities" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:228 +msgid "P > 1000" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:229 +msgid "" +"causes a version to be installed even if this constitutes a downgrade of the " +"package" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:233 +msgid "990 < P <=1000" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:234 +msgid "" +"causes a version to be installed even if it does not come from the target " +"release, unless the installed version is more recent" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:239 +msgid "500 < P <=990" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:240 +msgid "" +"causes a version to be installed unless there is a version available " +"belonging to the target release or the installed version is more recent" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:245 +msgid "100 < P <=500" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:246 +msgid "" +"causes a version to be installed unless there is a version available " +"belonging to some other distribution or the installed version is more recent" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:251 +msgid "0 < P <=100" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:252 +msgid "" +"causes a version to be installed only if there is no installed version of " +"the package" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:256 +msgid "P < 0" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:257 +msgid "prevents the version from being installed" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:223 +msgid "" +"Priorities (P) assigned in the APT preferences file must be positive or " +"negative integers. They are interpreted as follows (roughly speaking): " +"<placeholder type=\"variablelist\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:262 +msgid "" +"If any specific-form records match an available package version then the " +"first such record determines the priority of the package version. Failing " +"that, if any general-form records match an available package version then " +"the first such record determines the priority of the package version." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:268 +msgid "" +"For example, suppose the APT preferences file contains the three records " +"presented earlier:" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><programlisting> +#: apt_preferences.5.xml:272 +#, no-wrap +msgid "" +"Package: perl\n" +"Pin: version 5.8*\n" +"Pin-Priority: 1001\n" +"\n" +"Package: *\n" +"Pin: origin \"\"\n" +"Pin-Priority: 999\n" +"\n" +"Package: *\n" +"Pin: release unstable\n" +"Pin-Priority: 50\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:285 +msgid "Then:" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:287 +msgid "" +"The most recent available version of the <literal>perl</literal> package " +"will be installed, so long as that version's version number begins with " +"\"<literal>5.8</literal>\". If <emphasis>any</emphasis> 5.8* version of " +"<literal>perl</literal> is available and the installed version is 5.9*, then " +"<literal>perl</literal> will be downgraded." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:292 +msgid "" +"A version of any package other than <literal>perl</literal> that is " +"available from the local system has priority over other versions, even " +"versions belonging to the target release." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:296 +msgid "" +"A version of a package whose origin is not the local system but some other " +"site listed in &sources-list; and which belongs to an <literal>unstable</" +"literal> distribution is only installed if it is selected for installation " +"and no version of the package is already installed." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:306 +msgid "Determination of Package Version and Distribution Properties" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:308 +msgid "" +"The locations listed in the &sources-list; file should provide " +"<filename>Packages</filename> and <filename>Release</filename> files to " +"describe the packages available at that location." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:320 +msgid "the <literal>Package:</literal> line" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:321 +msgid "gives the package name" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:324 apt_preferences.5.xml:374 +msgid "the <literal>Version:</literal> line" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:325 +msgid "gives the version number for the named package" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:312 +msgid "" +"The <filename>Packages</filename> file is normally found in the directory " +"<filename>.../dists/<replaceable>dist-name</replaceable>/" +"<replaceable>component</replaceable>/<replaceable>arch</replaceable></" +"filename>: for example, <filename>.../dists/stable/main/binary-i386/" +"Packages</filename>. It consists of a series of multi-line records, one for " +"each package available in that directory. Only two lines in each record are " +"relevant for setting APT priorities: <placeholder type=\"variablelist\" id=" +"\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:341 +msgid "the <literal>Archive:</literal> or <literal>Suite:</literal> line" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:342 +msgid "" +"names the archive to which all the packages in the directory tree belong. " +"For example, the line \"Archive: stable\" or \"Suite: stable\" specifies " +"that all of the packages in the directory tree below the parent of the " +"<filename>Release</filename> file are in a <literal>stable</literal> " +"archive. Specifying this value in the APT preferences file would require " +"the line:" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting> +#: apt_preferences.5.xml:352 +#, no-wrap +msgid "Pin: release a=stable\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:358 +msgid "the <literal>Codename:</literal> line" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:359 +msgid "" +"names the codename to which all the packages in the directory tree belong. " +"For example, the line \"Codename: squeeze\" specifies that all of the " +"packages in the directory tree below the parent of the <filename>Release</" +"filename> file belong to a version named <literal>squeeze</literal>. " +"Specifying this value in the APT preferences file would require the line:" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting> +#: apt_preferences.5.xml:368 +#, no-wrap +msgid "Pin: release n=squeeze\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:375 +msgid "" +"names the release version. For example, the packages in the tree might " +"belong to Debian GNU/Linux release version 3.0. Note that there is normally " +"no version number for the <literal>testing</literal> and <literal>unstable</" +"literal> distributions because they have not been released yet. Specifying " +"this in the APT preferences file would require one of the following lines." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting> +#: apt_preferences.5.xml:384 +#, no-wrap +msgid "" +"Pin: release v=3.0\n" +"Pin: release a=stable, v=3.0\n" +"Pin: release 3.0\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:393 +msgid "the <literal>Component:</literal> line" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:394 +msgid "" +"names the licensing component associated with the packages in the directory " +"tree of the <filename>Release</filename> file. For example, the line " +"\"Component: main\" specifies that all the packages in the directory tree " +"are from the <literal>main</literal> component, which entails that they are " +"licensed under terms listed in the Debian Free Software Guidelines. " +"Specifying this component in the APT preferences file would require the line:" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting> +#: apt_preferences.5.xml:403 +#, no-wrap +msgid "Pin: release c=main\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:409 +msgid "the <literal>Origin:</literal> line" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:410 +msgid "" +"names the originator of the packages in the directory tree of the " +"<filename>Release</filename> file. Most commonly, this is <literal>Debian</" +"literal>. Specifying this origin in the APT preferences file would require " +"the line:" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting> +#: apt_preferences.5.xml:416 +#, no-wrap +msgid "Pin: release o=Debian\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:422 +msgid "the <literal>Label:</literal> line" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:423 +msgid "" +"names the label of the packages in the directory tree of the " +"<filename>Release</filename> file. Most commonly, this is <literal>Debian</" +"literal>. Specifying this label in the APT preferences file would require " +"the line:" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting> +#: apt_preferences.5.xml:429 +#, no-wrap +msgid "Pin: release l=Debian\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:330 +msgid "" +"The <filename>Release</filename> file is normally found in the directory " +"<filename>.../dists/<replaceable>dist-name</replaceable></filename>: for " +"example, <filename>.../dists/stable/Release</filename>, or <filename>.../" +"dists/woody/Release</filename>. It consists of a single multi-line record " +"which applies to <emphasis>all</emphasis> of the packages in the directory " +"tree below its parent. Unlike the <filename>Packages</filename> file, " +"nearly all of the lines in a <filename>Release</filename> file are relevant " +"for setting APT priorities: <placeholder type=\"variablelist\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:436 +msgid "" +"All of the <filename>Packages</filename> and <filename>Release</filename> " +"files retrieved from locations listed in the &sources-list; file are stored " +"in the directory <filename>/var/lib/apt/lists</filename>, or in the file " +"named by the variable <literal>Dir::State::Lists</literal> in the " +"<filename>apt.conf</filename> file. For example, the file <filename>debian." +"lcs.mit.edu_debian_dists_unstable_contrib_binary-i386_Release</filename> " +"contains the <filename>Release</filename> file retrieved from the site " +"<literal>debian.lcs.mit.edu</literal> for <literal>binary-i386</literal> " +"architecture files from the <literal>contrib</literal> component of the " +"<literal>unstable</literal> distribution." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:449 +msgid "Optional Lines in an APT Preferences Record" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:451 +msgid "" +"Each record in the APT preferences file can optionally begin with one or " +"more lines beginning with the word <literal>Explanation:</literal>. This " +"provides a place for comments." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:455 +msgid "" +"The <literal>Pin-Priority:</literal> line in each APT preferences record is " +"optional. If omitted, APT assigns a priority of 1 less than the last value " +"specified on a line beginning with <literal>Pin-Priority: release ...</" +"literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:464 +msgid "Tracking Stable" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:472 +#, no-wrap +msgid "" +"Explanation: Uninstall or do not install any Debian-originated\n" +"Explanation: package versions other than those in the stable distro\n" +"Package: *\n" +"Pin: release a=stable\n" +"Pin-Priority: 900\n" +"\n" +"Package: *\n" +"Pin: release o=Debian\n" +"Pin-Priority: -10\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:466 +msgid "" +"The following APT preferences file will cause APT to assign a priority " +"higher than the default (500) to all package versions belonging to a " +"<literal>stable</literal> distribution and a prohibitively low priority to " +"package versions belonging to other <literal>Debian</literal> " +"distributions. <placeholder type=\"programlisting\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:489 apt_preferences.5.xml:535 +#: apt_preferences.5.xml:593 +#, no-wrap +msgid "" +"apt-get install <replaceable>package-name</replaceable>\n" +"apt-get upgrade\n" +"apt-get dist-upgrade\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:484 +msgid "" +"With a suitable &sources-list; file and the above preferences file, any of " +"the following commands will cause APT to upgrade to the latest " +"<literal>stable</literal> version(s). <placeholder type=\"programlisting\" " +"id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:501 +#, no-wrap +msgid "apt-get install <replaceable>package</replaceable>/testing\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:495 +msgid "" +"The following command will cause APT to upgrade the specified package to the " +"latest version from the <literal>testing</literal> distribution; the package " +"will not be upgraded again unless this command is given again. <placeholder " +"type=\"programlisting\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:507 +msgid "Tracking Testing or Unstable" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:516 +#, no-wrap +msgid "" +"Package: *\n" +"Pin: release a=testing\n" +"Pin-Priority: 900\n" +"\n" +"Package: *\n" +"Pin: release a=unstable\n" +"Pin-Priority: 800\n" +"\n" +"Package: *\n" +"Pin: release o=Debian\n" +"Pin-Priority: -10\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:509 +msgid "" +"The following APT preferences file will cause APT to assign a high priority " +"to package versions from the <literal>testing</literal> distribution, a " +"lower priority to package versions from the <literal>unstable</literal> " +"distribution, and a prohibitively low priority to package versions from " +"other <literal>Debian</literal> distributions. <placeholder type=" +"\"programlisting\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:530 +msgid "" +"With a suitable &sources-list; file and the above preferences file, any of " +"the following commands will cause APT to upgrade to the latest " +"<literal>testing</literal> version(s). <placeholder type=\"programlisting\" " +"id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:550 +#, no-wrap +msgid "apt-get install <replaceable>package</replaceable>/unstable\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:541 +msgid "" +"The following command will cause APT to upgrade the specified package to the " +"latest version from the <literal>unstable</literal> distribution. " +"Thereafter, <command>apt-get upgrade</command> will upgrade the package to " +"the most recent <literal>testing</literal> version if that is more recent " +"than the installed version, otherwise, to the most recent <literal>unstable</" +"literal> version if that is more recent than the installed version. " +"<placeholder type=\"programlisting\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:557 +msgid "Tracking the evolution of a codename release" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:571 +#, no-wrap +msgid "" +"Explanation: Uninstall or do not install any Debian-originated package versions\n" +"Explanation: other than those in the distribution codenamed with squeeze or sid\n" +"Package: *\n" +"Pin: release n=squeeze\n" +"Pin-Priority: 900\n" +"\n" +"Explanation: Debian unstable is always codenamed with sid\n" +"Package: *\n" +"Pin: release a=sid\n" +"Pin-Priority: 800\n" +"\n" +"Package: *\n" +"Pin: release o=Debian\n" +"Pin-Priority: -10\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:559 +msgid "" +"The following APT preferences file will cause APT to assign a priority " +"higher than the default (500) to all package versions belonging to a " +"specified codename of a distribution and a prohibitively low priority to " +"package versions belonging to other <literal>Debian</literal> distributions, " +"codenames and archives. Note that with this APT preference APT will follow " +"the migration of a release from the archive <literal>testing</literal> to " +"<literal>stable</literal> and later <literal>oldstable</literal>. If you " +"want to follow for example the progress in <literal>testing</literal> " +"notwithstanding the codename changes you should use the example " +"configurations above. <placeholder type=\"programlisting\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:588 +msgid "" +"With a suitable &sources-list; file and the above preferences file, any of " +"the following commands will cause APT to upgrade to the latest version(s) in " +"the release codenamed with <literal>squeeze</literal>. <placeholder type=" +"\"programlisting\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:608 +#, no-wrap +msgid "apt-get install <replaceable>package</replaceable>/sid\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:599 +msgid "" +"The following command will cause APT to upgrade the specified package to the " +"latest version from the <literal>sid</literal> distribution. Thereafter, " +"<command>apt-get upgrade</command> will upgrade the package to the most " +"recent <literal>squeeze</literal> version if that is more recent than the " +"installed version, otherwise, to the most recent <literal>sid</literal> " +"version if that is more recent than the installed version. <placeholder " +"type=\"programlisting\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist> +#: apt_preferences.5.xml:617 +msgid "&file-preferences;" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt_preferences.5.xml:623 +msgid "&apt-get; &apt-cache; &apt-conf; &sources-list;" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: sources.list.5.xml:22 sources.list.5.xml:29 +msgid "sources.list" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: sources.list.5.xml:30 +msgid "Package resource list for APT" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:34 +msgid "" +"The package resource list is used to locate archives of the package " +"distribution system in use on the system. At this time, this manual page " +"documents only the packaging system used by the Debian GNU/Linux system. " +"This control file is <filename>/etc/apt/sources.list</filename>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:39 +msgid "" +"The source list is designed to support any number of active sources and a " +"variety of source media. The file lists one source per line, with the most " +"preferred source listed first. The format of each line is: <literal>type uri " +"args</literal> The first item, <literal>type</literal> determines the format " +"for <literal>args</literal>. <literal>uri</literal> is a Universal Resource " +"Identifier (URI), which is a superset of the more specific and well-known " +"Universal Resource Locator, or URL. The rest of the line can be marked as a " +"comment by using a #." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: sources.list.5.xml:50 +msgid "sources.list.d" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:51 +msgid "" +"The <filename>/etc/apt/sources.list.d</filename> directory provides a way to " +"add sources.list entries in separate files. The format is the same as for " +"the regular <filename>sources.list</filename> file. File names need to end " +"with <filename>.list</filename> and may only contain letters (a-z and A-Z), " +"digits (0-9), underscore (_), hyphen (-) and period (.) characters. " +"Otherwise they will be silently ignored." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: sources.list.5.xml:60 +msgid "The deb and deb-src types" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:61 +msgid "" +"The <literal>deb</literal> type describes a typical two-level Debian " +"archive, <filename>distribution/component</filename>. Typically, " +"<literal>distribution</literal> is generally one of <literal>stable</" +"literal> <literal>unstable</literal> or <literal>testing</literal> while " +"component is one of <literal>main</literal> <literal>contrib</literal> " +"<literal>non-free</literal> or <literal>non-us</literal>. The <literal>deb-" +"src</literal> type describes a debian distribution's source code in the same " +"form as the <literal>deb</literal> type. A <literal>deb-src</literal> line " +"is required to fetch source indexes." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:73 +msgid "" +"The format for a <filename>sources.list</filename> entry using the " +"<literal>deb</literal> and <literal>deb-src</literal> types is:" +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:76 +#, no-wrap +msgid "deb uri distribution [component1] [component2] [...]" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:78 +msgid "" +"The URI for the <literal>deb</literal> type must specify the base of the " +"Debian distribution, from which APT will find the information it needs. " +"<literal>distribution</literal> can specify an exact path, in which case the " +"components must be omitted and <literal>distribution</literal> must end with " +"a slash (/). This is useful for when the case only a particular sub-section " +"of the archive denoted by the URI is of interest. If <literal>distribution</" +"literal> does not specify an exact path, at least one <literal>component</" +"literal> must be present." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:87 +msgid "" +"<literal>distribution</literal> may also contain a variable, <literal>$(ARCH)" +"</literal> which expands to the Debian architecture (i386, m68k, " +"powerpc, ...) used on the system. This permits architecture-independent " +"<filename>sources.list</filename> files to be used. In general this is only " +"of interest when specifying an exact path, <literal>APT</literal> will " +"automatically generate a URI with the current architecture otherwise." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:95 +msgid "" +"Since only one distribution can be specified per line it may be necessary to " +"have multiple lines for the same URI, if a subset of all available " +"distributions or components at that location is desired. APT will sort the " +"URI list after it has generated a complete set internally, and will collapse " +"multiple references to the same Internet host, for instance, into a single " +"connection, so that it does not inefficiently establish an FTP connection, " +"close it, do something else, and then re-establish a connection to that same " +"host. This feature is useful for accessing busy FTP sites with limits on the " +"number of simultaneous anonymous users. APT also parallelizes connections to " +"different hosts to more effectively deal with sites with low bandwidth." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:107 +msgid "" +"It is important to list sources in order of preference, with the most " +"preferred source listed first. Typically this will result in sorting by " +"speed from fastest to slowest (CD-ROM followed by hosts on a local network, " +"followed by distant Internet hosts, for example)." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:112 +msgid "Some examples:" +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:114 +#, no-wrap +msgid "" +"deb http://http.us.debian.org/debian stable main contrib non-free\n" +"deb http://http.us.debian.org/debian dists/stable-updates/\n" +" " +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: sources.list.5.xml:120 +msgid "URI specification" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: sources.list.5.xml:125 +msgid "file" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:127 +msgid "" +"The file scheme allows an arbitrary directory in the file system to be " +"considered an archive. This is useful for NFS mounts and local mirrors or " +"archives." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:134 +msgid "" +"The cdrom scheme allows APT to use a local CDROM drive with media swapping. " +"Use the &apt-cdrom; program to create cdrom entries in the source list." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:141 +msgid "" +"The http scheme specifies an HTTP server for the archive. If an environment " +"variable <envar>http_proxy</envar> is set with the format http://server:" +"port/, the proxy server specified in <envar>http_proxy</envar> will be used. " +"Users of authenticated HTTP/1.1 proxies may use a string of the format " +"http://user:pass@server:port/. Note that this is an insecure method of " +"authentication." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:152 +msgid "" +"The ftp scheme specifies an FTP server for the archive. APT's FTP behavior " +"is highly configurable; for more information see the &apt-conf; manual page. " +"Please note that a ftp proxy can be specified by using the <envar>ftp_proxy</" +"envar> environment variable. It is possible to specify a http proxy (http " +"proxy servers often understand ftp urls) using this method and ONLY this " +"method. ftp proxies using http specified in the configuration file will be " +"ignored." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: sources.list.5.xml:161 +msgid "copy" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:163 +msgid "" +"The copy scheme is identical to the file scheme except that packages are " +"copied into the cache directory instead of used directly at their location. " +"This is useful for people using a zip disk to copy files around with APT." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: sources.list.5.xml:168 +msgid "rsh" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: sources.list.5.xml:168 +msgid "ssh" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:170 +msgid "" +"The rsh/ssh method invokes rsh/ssh to connect to a remote host as a given " +"user and access the files. It is a good idea to do prior arrangements with " +"RSA keys or rhosts. Access to files on the remote uses standard " +"<command>find</command> and <command>dd</command> commands to perform the " +"file transfers from the remote." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: sources.list.5.xml:178 +msgid "more recongnizable URI types" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:180 +msgid "" +"APT can be extended with more methods shipped in other optional packages " +"which should follow the nameing scheme <literal>apt-transport-" +"<replaceable>method</replaceable></literal>. The APT team e.g. maintain " +"also the <literal>apt-transport-https</literal> package which provides " +"access methods for https-URIs with features similiar to the http method, but " +"other methods for using e.g. debtorrent are also available, see " +"<citerefentry> <refentrytitle><filename>apt-transport-debtorrent</filename></" +"refentrytitle> <manvolnum>1</manvolnum></citerefentry>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:122 +msgid "" +"The currently recognized URI types are cdrom, file, http, ftp, copy, ssh, " +"rsh. <placeholder type=\"variablelist\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:194 +msgid "" +"Uses the archive stored locally (or NFS mounted) at /home/jason/debian for " +"stable/main, stable/contrib, and stable/non-free." +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:196 +#, no-wrap +msgid "deb file:/home/jason/debian stable main contrib non-free" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:198 +msgid "As above, except this uses the unstable (development) distribution." +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:199 +#, no-wrap +msgid "deb file:/home/jason/debian unstable main contrib non-free" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:201 +msgid "Source line for the above" +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:202 +#, no-wrap +msgid "deb-src file:/home/jason/debian unstable main contrib non-free" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:204 +msgid "" +"Uses HTTP to access the archive at archive.debian.org, and uses only the " +"hamm/main area." +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:206 +#, no-wrap +msgid "deb http://archive.debian.org/debian-archive hamm main" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:208 +msgid "" +"Uses FTP to access the archive at ftp.debian.org, under the debian " +"directory, and uses only the stable/contrib area." +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:210 +#, no-wrap +msgid "deb ftp://ftp.debian.org/debian stable contrib" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:212 +msgid "" +"Uses FTP to access the archive at ftp.debian.org, under the debian " +"directory, and uses only the unstable/contrib area. If this line appears as " +"well as the one in the previous example in <filename>sources.list</filename> " +"a single FTP session will be used for both resource lines." +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:216 +#, no-wrap +msgid "deb ftp://ftp.debian.org/debian unstable contrib" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:218 +msgid "" +"Uses HTTP to access the archive at nonus.debian.org, under the debian-non-US " +"directory." +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:220 +#, no-wrap +msgid "deb http://nonus.debian.org/debian-non-US stable/non-US main contrib non-free" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><literallayout> +#: sources.list.5.xml:229 +#, no-wrap +msgid "deb http://ftp.de.debian.org/debian-non-US unstable/binary-$(ARCH)/" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:222 +msgid "" +"Uses HTTP to access the archive at nonus.debian.org, under the debian-non-US " +"directory, and uses only files found under <filename>unstable/binary-i386</" +"filename> on i386 machines, <filename>unstable/binary-m68k</filename> on " +"m68k, and so forth for other supported architectures. [Note this example " +"only illustrates how to use the substitution variable; non-us is no longer " +"structured like this] <placeholder type=\"literallayout\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:234 +msgid "&apt-cache; &apt-conf;" +msgstr "" + +#. type: <title> +#: guide.sgml:4 +msgid "APT User's Guide" +msgstr "" + +#. type: +#: guide.sgml:6 offline.sgml:6 +#, fuzzy +msgid "Jason Gunthorpe jgg@debian.org" +msgstr "Jason Gunthorpe jgg@debian.org" + +#. type: +#: guide.sgml:7 +#, fuzzy +msgid "$Id: guide.sgml,v 1.7 2003/04/26 23:26:13 doogie Exp $" +msgstr "$Id: offline.sgml,v 1.8 2003/02/12 15:06:41 doogie Exp $" + +#. type: +#: guide.sgml:11 +msgid "" +"This document provides an overview of how to use the the APT package manager." +msgstr "" + +#. type: +#: guide.sgml:15 +#, fuzzy +msgid "Copyright © Jason Gunthorpe, 1998." +msgstr "Copyright © Jason Gunthorpe, 1999." + +#. type:

+#: guide.sgml:21 offline.sgml:22 +#, fuzzy +msgid "" +"\"APT\" and this document are free software; you can redistribute them and/" +"or modify them under the terms of the GNU General Public License as " +"published by the Free Software Foundation; either version 2 of the License, " +"or (at your option) any later version." +msgstr "" +"\"APT\" i ten dokument s± oprogramowaniem wolnodostêpnym; mo¿esz " +"rozpowszechniaæ je i/lub zmieniaæ w zgodzie z postanowieniami \"Ogólnej " +"Licencji Publicznej GNU\" (GNU General Public License) takiej, jak zosta³a " +"opublikowana przez \"Fundacje Wolnego Oprogramowania (Free Software " +"Foundation); albo w wersji 2 tej¿e licencji, albo (twój wybór) w dowolnej " +"pó¼niejszej." + +#. type:

+#: guide.sgml:24 offline.sgml:25 +#, fuzzy +msgid "" +"For more details, on Debian GNU/Linux systems, see the file /usr/share/" +"common-licenses/GPL for the full license." +msgstr "" +"Wiêcej szczegó³ów mo¿na uzyskaæ, przegl±daj±c plik zawieraj±cy pe³ny tekst " +"licencji (w systemach Debian jest to plik /usr/share/common-licenses/GPL)." + +#. type: +#: guide.sgml:32 +msgid "General" +msgstr "" + +#. type:

+#: guide.sgml:38 +msgid "" +"The APT package currently contains two sections, the APT dselect method and the apt-get command line user interface. Both " +"provide a way to install and remove packages as well as download new " +"packages from the Internet." +msgstr "" + +#. type: +#: guide.sgml:39 +msgid "Anatomy of the Package System" +msgstr "" + +#. type:

+#: guide.sgml:44 +msgid "" +"The Debian packaging system has a large amount of information associated " +"with each package to help assure that it integrates cleanly and easily into " +"the system. The most prominent of its features is the dependency system." +msgstr "" + +#. type:

+#: guide.sgml:52 +msgid "" +"The dependency system allows individual programs to make use of shared " +"elements in the system such as libraries. It simplifies placing infrequently " +"used portions of a program in separate packages to reduce the number of " +"things the average user is required to install. Also, it allows for choices " +"in mail transport agents, X servers and so on." +msgstr "" + +#. type:

+#: guide.sgml:57 +msgid "" +"The first step to understanding the dependency system is to grasp the " +"concept of a simple dependency. The meaning of a simple dependency is that a " +"package requires another package to be installed at the same time to work " +"properly." +msgstr "" + +#. type:

+#: guide.sgml:63 +msgid "" +"For instance, mailcrypt is an emacs extension that aids in encrypting email " +"with GPG. Without GPGP installed mail-crypt is useless, so mailcrypt has a " +"simple dependency on GPG. Also, because it is an emacs extension it has a " +"simple dependency on emacs, without emacs it is completely useless." +msgstr "" + +#. type:

+#: guide.sgml:73 +msgid "" +"The other important dependency to understand is a conflicting dependency. It " +"means that a package, when installed with another package, will not work and " +"may possibly be extremely harmful to the system. As an example consider a " +"mail transport agent such as sendmail, exim or qmail. It is not possible to " +"have two mail transport agents installed because both need to listen to the " +"network to receive mail. Attempting to install two will seriously damage the " +"system so all mail transport agents have a conflicting dependency with all " +"other mail transport agents." +msgstr "" + +#. type:

+#: guide.sgml:83 +msgid "" +"As an added complication there is the possibility for a package to pretend " +"to be another package. Consider that exim and sendmail for many intents are " +"identical, they both deliver mail and understand a common interface. Hence, " +"the package system has a way for them to declare that they are both mail-" +"transport-agents. So, exim and sendmail both declare that they provide a " +"mail-transport-agent and other packages that need a mail transport agent " +"depend on mail-transport-agent. This can add a great deal of confusion when " +"trying to manually fix packages." +msgstr "" + +#. type:

+#: guide.sgml:88 +msgid "" +"At any given time a single dependency may be met by packages that are " +"already installed or it may not be. APT attempts to help resolve dependency " +"issues by providing a number of automatic algorithms that help in selecting " +"packages for installation." +msgstr "" + +#. type:

+#: guide.sgml:102 +msgid "" +"apt-get provides a simple way to install packages from the " +"command line. Unlike dpkg, apt-get does not " +"understand .deb files, it works with the package's proper name and can only " +"install .deb archives from a Source." +msgstr "" + +#. type:

+#: guide.sgml:109 +msgid "" +"The first

If you are using an http proxy server you must set " +"the http_proxy environment variable first, see sources.list(5)

thing that should be done before using apt-get is to " +"fetch the package lists from the Sources so that it knows what " +"packages are available. This is done with apt-get update. For " +"instance," +msgstr "" + +#. type: +#: guide.sgml:116 +#, no-wrap +msgid "" +"# apt-get update\n" +"Get http://ftp.de.debian.org/debian-non-US/ stable/binary-i386/ Packages\n" +"Get http://llug.sep.bnl.gov/debian/ testing/contrib Packages\n" +"Reading Package Lists... Done\n" +"Building Dependency Tree... Done" +msgstr "" + +#. type:

+#: guide.sgml:120 +msgid "Once updated there are several commands that can be used:" +msgstr "" + +#. type:

+#: guide.sgml:131 +msgid "" +"Upgrade will attempt to gently upgrade the whole system. Upgrade will never " +"install a new package or remove an existing package, nor will it ever " +"upgrade a package that might cause some other package to break. This can be " +"used daily to relatively safely upgrade the system. Upgrade will list all of " +"the packages that it could not upgrade, this usually means that they depend " +"on new packages or conflict with some other package. dselect or " +"apt-get install can be used to force these packages to install." +msgstr "" + +#. type:

+#: guide.sgml:140 +msgid "" +"Install is used to install packages by name. The package is automatically " +"fetched and installed. This can be useful if you already know the name of " +"the package to install and do not want to go into a GUI to select it. Any " +"number of packages may be passed to install, they will all be fetched. " +"Install automatically attempts to resolve dependency problems with the " +"listed packages and will print a summary and ask for confirmation if " +"anything other than its arguments are changed." +msgstr "" + +#. type:

+#: guide.sgml:149 +msgid "" +"Dist-upgrade is a complete upgrader designed to simplify upgrading between " +"releases of Debian. It uses a sophisticated algorithm to determine the best " +"set of packages to install, upgrade and remove to get as much of the system " +"to the newest release. In some situations it may be desired to use dist-" +"upgrade rather than spend the time manually resolving dependencies in " +"dselect. Once dist-upgrade has completed then dselect can be used to install any packages that may have been left out." +msgstr "" + +#. type:

+#: guide.sgml:152 +msgid "" +"It is important to closely look at what dist-upgrade is going to do, its " +"decisions may sometimes be quite surprising." +msgstr "" + +#. type:

+#: guide.sgml:163 +msgid "" +"apt-get has several command line options that are detailed in " +"its man page, . The most useful " +"option is -d which does not install the fetched files. If the " +"system has to download a large number of package it would be undesired to " +"start installing them in case something goes wrong. When -d is used " +"the downloaded archives can be installed by simply running the command that " +"caused them to be downloaded again without -d." +msgstr "" + +#. type: +#: guide.sgml:168 +msgid "DSelect" +msgstr "" + +#. type:

+#: guide.sgml:173 +msgid "" +"The APT dselect method provides the complete APT system with " +"the dselect package selection GUI. dselect is used " +"to select the packages to be installed or removed and APT actually installs " +"them." +msgstr "" + +#. type:

+#: guide.sgml:184 +msgid "" +"To enable the APT method you need to to select [A]ccess in dselect and then choose the APT method. You will be prompted for a set of " +"Sources which are places to fetch archives from. These can be " +"remote Internet sites, local Debian mirrors or CDROMs. Each source can " +"provide a fragment of the total Debian archive, APT will automatically " +"combine them to form a complete set of packages. If you have a CDROM then it " +"is a good idea to specify it first and then specify a mirror so that you " +"have access to the latest bug fixes. APT will automatically use packages on " +"your CDROM before downloading from the Internet." +msgstr "" + +#. type: +#: guide.sgml:198 +#, no-wrap +msgid "" +" Set up a list of distribution source locations\n" +"\t \n" +" Please give the base URL of the debian distribution.\n" +" The access schemes I know about are: http file\n" +"\t \n" +" For example:\n" +" file:/mnt/debian,\n" +" ftp://ftp.debian.org/debian,\n" +" http://ftp.de.debian.org/debian,\n" +" \n" +" \n" +" URL [http://llug.sep.bnl.gov/debian]:" +msgstr "" + +#. type:

+#: guide.sgml:205 +msgid "" +"The Sources setup starts by asking for the base of the Debian " +"archive, defaulting to a HTTP mirror. Next it asks for the distribution to " +"get." +msgstr "" + +#. type: +#: guide.sgml:212 +#, no-wrap +msgid "" +" Please give the distribution tag to get or a path to the\n" +" package file ending in a /. The distribution\n" +" tags are typically something like: stable unstable testing non-US\n" +" \n" +" Distribution [stable]:" +msgstr "" + +#. type:

+#: guide.sgml:222 +msgid "" +"The distribution refers to the Debian version in the archive, stable refers to the latest released version and unstable refers to " +"the developmental version. non-US is only available on some mirrors " +"and refers to packages that contain encryption technology or other things " +"that cannot be exported from the United States. Importing these packages " +"into the US is legal however." +msgstr "" + +#. type: +#: guide.sgml:228 +#, no-wrap +msgid "" +" Please give the components to get\n" +" The components are typically something like: main contrib non-free\n" +" \n" +" Components [main contrib non-free]:" +msgstr "" + +#. type:

+#: guide.sgml:236 +msgid "" +"The components list refers to the list of sub distributions to fetch. The " +"distribution is split up based on software licenses, main being DFSG free " +"packages while contrib and non-free contain things that have various " +"restrictions placed on their use and distribution." +msgstr "" + +#. type:

+#: guide.sgml:240 +msgid "" +"Any number of sources can be added, the setup script will continue to prompt " +"until you have specified all that you want." +msgstr "" + +#. type:

+#: guide.sgml:247 +msgid "" +"Before starting to use dselect it is necessary to update the " +"available list by selecting [U]pdate from the menu. This is a super-set of " +"apt-get update that makes the fetched information available to " +"dselect. [U]pdate must be performed even if apt-get update has been run before." +msgstr "" + +#. type:

+#: guide.sgml:253 +msgid "" +"You can then go on and make your selections using [S]elect and then perform " +"the installation using [I]nstall. When using the APT method the [C]onfig and " +"[R]emove commands have no meaning, the [I]nstall command performs both of " +"them together." +msgstr "" + +#. type:

+#: guide.sgml:258 +msgid "" +"By default APT will automatically remove the package (.deb) files once they " +"have been successfully installed. To change this behavior place Dselect::" +"clean \"prompt\"; in /etc/apt/apt.conf." +msgstr "" + +#. type: +#: guide.sgml:264 +msgid "The Interface" +msgstr "" + +#. type:

+#: guide.sgml:278 +msgid "" +"Both that APT dselect method and apt-get share the " +"same interface. It is a simple system that generally tells you what it will " +"do and then goes and does it.

The dselect method " +"actually is a set of wrapper scripts to apt-get. The method " +"actually provides more functionality than is present in apt-get " +"alone.

 After printing out a summary of what will happen APT " +"then will print out some informative status messages so that you can " +"estimate how far along it is and how much is left to do." +msgstr "" + +#. type: +#: guide.sgml:280 +msgid "Startup" +msgstr "" + +#. type:

+#: guide.sgml:284 +msgid "" +"Before all operations except update, APT performs a number of actions to " +"prepare its internal state. It also does some checks of the system's state. " +"At any time these operations can be performed by running apt-get check." +msgstr "" + +#. type: +#: guide.sgml:289 +#, no-wrap +msgid "" +"# apt-get check\n" +"Reading Package Lists... Done\n" +"Building Dependency Tree... Done" +msgstr "" + +#. type:

+#: guide.sgml:297 +msgid "" +"The first thing it does is read all the package files into memory. APT uses " +"a caching scheme so this operation will be faster the second time it is run. " +"If some of the package files are not found then they will be ignored and a " +"warning will be printed when apt-get exits." +msgstr "" + +#. type:

+#: guide.sgml:303 +msgid "" +"The final operation performs a detailed analysis of the system's " +"dependencies. It checks every dependency of every installed or unpacked " +"package and considers if it is OK. Should this find a problem then a report " +"will be printed out and apt-get will refuse to run." +msgstr "" + +#. type: +#: guide.sgml:320 +#, no-wrap +msgid "" +"# apt-get check\n" +"Reading Package Lists... Done\n" +"Building Dependency Tree... Done\n" +"You might want to run apt-get -f install' to correct these.\n" +"Sorry, but the following packages have unmet dependencies:\n" +" 9fonts: Depends: xlib6g but it is not installed\n" +" uucp: Depends: mailx but it is not installed\n" +" blast: Depends: xlib6g (>= 3.3-5) but it is not installed\n" +" adduser: Depends: perl-base but it is not installed\n" +" aumix: Depends: libgpmg1 but it is not installed\n" +" debiandoc-sgml: Depends: sgml-base but it is not installed\n" +" bash-builtins: Depends: bash (>= 2.01) but 2.0-3 is installed\n" +" cthugha: Depends: svgalibg1 but it is not installed\n" +" Depends: xlib6g (>= 3.3-5) but it is not installed\n" +" libreadlineg2: Conflicts:libreadline2 (<< 2.1-2.1)" +msgstr "" + +#. type:

+#: guide.sgml:329 +msgid "" +"In this example the system has many problems, including a serious problem " +"with libreadlineg2. For each package that has unmet dependencies a line is " +"printed out indicating the package with the problem and the dependencies " +"that are unmet. A short explanation of why the package has a dependency " +"problem is also included." +msgstr "" + +#. type:

+#: guide.sgml:337 +msgid "" +"There are two ways a system can get into a broken state like this. The first " +"is caused by dpkg missing some subtle relationships between " +"packages when performing upgrades.

APT however considers all " +"known dependencies and attempts to prevent broken packages

. " +"The second is if a package installation fails during an operation. In this " +"situation a package may have been unpacked without its dependents being " +"installed." +msgstr "" + +#. type:

+#: guide.sgml:345 +msgid "" +"The second situation is much less serious than the first because APT places " +"certain constraints on the order that packages are installed. In both cases " +"supplying the -f option to apt-get will cause APT to " +"deduce a possible solution to the problem and then continue on. The APT " +"dselect method always supplies the -f option to allow " +"for easy continuation of failed maintainer scripts." +msgstr "" + +#. type:

+#: guide.sgml:351 +msgid "" +"However, if the -f option is used to correct a seriously broken " +"system caused by the first case then it is possible that it will either fail " +"immediately or the installation sequence will fail. In either case it is " +"necessary to manually use dpkg (possibly with forcing options) to correct " +"the situation enough to allow APT to proceed." +msgstr "" + +#. type: +#: guide.sgml:356 +msgid "The Status Report" +msgstr "" + +#. type:

+#: guide.sgml:363 +msgid "" +"Before proceeding apt-get will present a report on what will " +"happen. Generally the report reflects the type of operation being performed " +"but there are several common elements. In all cases the lists reflect the " +"final state of things, taking into account the -f option and any " +"other relevant activities to the command being executed." +msgstr "" + +#. type: +#: guide.sgml:364 +msgid "The Extra Package list" +msgstr "" + +#. type: +#: guide.sgml:372 +#, no-wrap +msgid "" +"The following extra packages will be installed:\n" +" libdbd-mysql-perl xlib6 zlib1 xzx libreadline2 libdbd-msql-perl\n" +" mailpgp xdpkg fileutils pinepgp zlib1g xlib6g perl-base\n" +" bin86 libgdbm1 libgdbmg1 quake-lib gmp2 bcc xbuffy\n" +" squake pgp-i python-base debmake ldso perl libreadlineg2\n" +" ssh" +msgstr "" + +#. type:

+#: guide.sgml:379 +msgid "" +"The Extra Package list shows all of the packages that will be installed or " +"upgraded in excess of the ones mentioned on the command line. It is only " +"generated for an install command. The listed packages are often the " +"result of an Auto Install." +msgstr "" + +#. type: +#: guide.sgml:382 +msgid "The Packages to Remove" +msgstr "" + +#. type: +#: guide.sgml:389 +#, no-wrap +msgid "" +"The following packages will be REMOVED:\n" +" xlib6-dev xpat2 tk40-dev xkeycaps xbattle xonix\n" +" xdaliclock tk40 tk41 xforms0.86 ghostview xloadimage xcolorsel\n" +" xadmin xboard perl-debug tkined xtetris libreadline2-dev perl-suid\n" +" nas xpilot xfig" +msgstr "" + +#. type:

+#: guide.sgml:399 +msgid "" +"The Packages to Remove list shows all of the packages that will be removed " +"from the system. It can be shown for any of the operations and should be " +"given a careful inspection to ensure nothing important is to be taken off. " +"The -f option is especially good at generating packages to remove " +"so extreme care should be used in that case. The list may contain packages " +"that are going to be removed because they are only partially installed, " +"possibly due to an aborted installation." +msgstr "" + +#. type: +#: guide.sgml:402 +msgid "The New Packages list" +msgstr "" + +#. type: +#: guide.sgml:406 +#, no-wrap +msgid "" +"The following NEW packages will installed:\n" +" zlib1g xlib6g perl-base libgdbmg1 quake-lib gmp2 pgp-i python-base" +msgstr "" + +#. type:

+#: guide.sgml:411 +msgid "" +"The New Packages list is simply a reminder of what will happen. The packages " +"listed are not presently installed in the system but will be when APT is " +"done." +msgstr "" + +#. type: +#: guide.sgml:414 +msgid "The Kept Back list" +msgstr "" + +#. type: +#: guide.sgml:419 +#, no-wrap +msgid "" +"The following packages have been kept back\n" +" compface man-db tetex-base msql libpaper svgalib1\n" +" gs snmp arena lynx xpat2 groff xscreensaver" +msgstr "" + +#. type:

+#: guide.sgml:428 +msgid "" +"Whenever the whole system is being upgraded there is the possibility that " +"new versions of packages cannot be installed because they require new things " +"or conflict with already installed things. In this case the package will " +"appear in the Kept Back list. The best way to convince packages listed there " +"to install is with apt-get install or by using dselect " +"to resolve their problems." +msgstr "" + +#. type: +#: guide.sgml:431 +msgid "Held Packages warning" +msgstr "" + +#. type: +#: guide.sgml:435 +#, no-wrap +msgid "" +"The following held packages will be changed:\n" +" cvs" +msgstr "" + +#. type:

+#: guide.sgml:441 +msgid "" +"Sometimes you can ask APT to install a package that is on hold, in such a " +"case it prints out a warning that the held package is going to be changed. " +"This should only happen during dist-upgrade or install." +msgstr "" + +#. type: +#: guide.sgml:444 +msgid "Final summary" +msgstr "" + +#. type:

+#: guide.sgml:447 +msgid "" +"Finally, APT will print out a summary of all the changes that will occur." +msgstr "" + +#. type: +#: guide.sgml:452 +#, no-wrap +msgid "" +"206 packages upgraded, 8 newly installed, 23 to remove and 51 not upgraded.\n" +"12 packages not fully installed or removed.\n" +"Need to get 65.7M/66.7M of archives. After unpacking 26.5M will be used." +msgstr "" + +#. type:

+#: guide.sgml:470 +msgid "" +"The first line of the summary simply is a reduced version of all of the " +"lists and includes the number of upgrades - that is packages already " +"installed that have new versions available. The second line indicates the " +"number of poorly configured packages, possibly the result of an aborted " +"installation. The final line shows the space requirements that the " +"installation needs. The first pair of numbers refer to the size of the " +"archive files. The first number indicates the number of bytes that must be " +"fetched from remote locations and the second indicates the total size of all " +"the archives required. The next number indicates the size difference between " +"the presently installed packages and the newly installed packages. It is " +"roughly equivalent to the space required in /usr after everything is done. " +"If a large number of packages are being removed then the value may indicate " +"the amount of space that will be freed." +msgstr "" + +#. type:

+#: guide.sgml:473 +msgid "" +"Some other reports can be generated by using the -u option to show packages " +"to upgrade, they are similar to the previous examples." +msgstr "" + +#. type: +#: guide.sgml:477 +msgid "The Status Display" +msgstr "" + +#. type:

+#: guide.sgml:481 +msgid "" +"During the download of archives and package files APT prints out a series of " +"status messages." +msgstr "" + +#. type: +#: guide.sgml:490 +#, no-wrap +msgid "" +"# apt-get update\n" +"Get:1 http://ftp.de.debian.org/debian-non-US/ stable/non-US/ Packages\n" +"Get:2 http://llug.sep.bnl.gov/debian/ testing/contrib Packages\n" +"Hit http://llug.sep.bnl.gov/debian/ testing/main Packages\n" +"Get:4 http://ftp.de.debian.org/debian-non-US/ unstable/binary-i386/ Packages\n" +"Get:5 http://llug.sep.bnl.gov/debian/ testing/non-free Packages\n" +"11% [5 testing/non-free `Waiting for file' 0/32.1k 0%] 2203b/s 1m52s" +msgstr "" + +#. type:

+#: guide.sgml:500 +msgid "" +"The lines starting with Get are printed out when APT begins to " +"fetch a file while the last line indicates the progress of the download. The " +"first percent value on the progress line indicates the total percent done of " +"all files. Unfortunately since the size of the Package files is unknown " +"apt-get update estimates the percent done which causes some " +"inaccuracies." +msgstr "" + +#. type:

+#: guide.sgml:509 +msgid "" +"The next section of the status line is repeated once for each download " +"thread and indicates the operation being performed and some useful " +"information about what is happening. Sometimes this section will simply read " +"Forking which means the OS is loading the download module. The " +"first word after the [ is the fetch number as shown on the history lines. " +"The next word is the short form name of the object being downloaded. For " +"archives it will contain the name of the package that is being fetched." +msgstr "" + +#. type:

+#: guide.sgml:524 +msgid "" +"Inside of the single quote is an informative string indicating the progress " +"of the negotiation phase of the download. Typically it progresses from " +"Connecting to Waiting for file to Downloading or " +"Resuming. The final value is the number of bytes downloaded from " +"the remote site. Once the download begins this is represented as " +"102/10.2k indicating that 102 bytes have been fetched and 10.2 " +"kilobytes is expected. The total size is always shown in 4 figure notation " +"to preserve space. After the size display is a percent meter for the file " +"itself. The second last element is the instantaneous average speed. This " +"values is updated every 5 seconds and reflects the rate of data transfer for " +"that period. Finally is shown the estimated transfer time. This is updated " +"regularly and reflects the time to complete everything at the shown transfer " +"rate." +msgstr "" + +#. type:

+#: guide.sgml:530 +msgid "" +"The status display updates every half second to provide a constant feedback " +"on the download progress while the Get lines scroll back whenever a new file " +"is started. Since the status display is constantly updated it is unsuitable " +"for logging to a file, use the -q option to remove the status " +"display." +msgstr "" + +#. type: +#: guide.sgml:535 +msgid "Dpkg" +msgstr "" + +#. type:

+#: guide.sgml:542 +msgid "" +"APT uses dpkg for installing the archives and will switch over " +"to the dpkg interface once downloading is completed. " +"dpkg will also ask a number of questions as it processes the " +"packages and the packages themselves may also ask several questions. Before " +"each question there is usually a description of what it is asking and the " +"questions are too varied to discuss completely here." +msgstr "" + +#. type: +#: offline.sgml:4 +#, fuzzy +msgid "Using APT Offline" +msgstr "U¿ywanie APT w trybie offline" + +#. type: +#: offline.sgml:7 +#, fuzzy +msgid "$Id: offline.sgml,v 1.8 2003/02/12 15:06:41 doogie Exp $" +msgstr "$Id: offline.sgml,v 1.8 2003/02/12 15:06:41 doogie Exp $" + +#. type: +#: offline.sgml:12 +#, fuzzy +msgid "" +"This document describes how to use APT in a non-networked environment, " +"specifically a 'sneaker-net' approach for performing upgrades." +msgstr "" +"Dokument ten opisuje u¿ywanie programu APT w ¶rodowiskach pozbawionych " +"dostêpu, do sieci, a w szczególno¶ci metodê pozwalaj±c± na robienie " +"aktualizacji systemu." + +#. type: +#: offline.sgml:16 +#, fuzzy +msgid "Copyright © Jason Gunthorpe, 1999." +msgstr "Copyright © Jason Gunthorpe, 1999." + +#. type: +#: offline.sgml:32 +#, fuzzy +msgid "Introduction" +msgstr "Wstêp" + +#. type: +#: offline.sgml:34 offline.sgml:65 offline.sgml:180 +#, fuzzy +msgid "Overview" +msgstr "Wprowadzenie" + +#. type:

+#: offline.sgml:40 +#, fuzzy +msgid "" +"Normally APT requires direct access to a Debian archive, either from a local " +"media or through a network. Another common complaint is that a Debian " +"machine is on a slow link, such as a modem and another machine has a very " +"fast connection but they are physically distant." +msgstr "" +"Normalnie APT wymaga bezpo¶redniego dostêpu do archiwów Debiana przez sieæ " +"lokaln± albo przez sieæ internetow±. Kolejn± niedogodno¶ci± mo¿e byæ fakt, " +"¿e nasz komputer, który pracuje na powolnym ³±czu takim jak modem, jest " +"znacznie oddalony od innego komputera z szybkim ³±czem." + +#. type:

+#: offline.sgml:51 +#, fuzzy +msgid "" +"The solution to this is to use large removable media such as a Zip disc or a " +"SuperDisk disc. These discs are not large enough to store the entire Debian " +"archive but can easily fit a subset large enough for most users. The idea is " +"to use APT to generate a list of packages that are required and then fetch " +"them onto the disc using another machine with good connectivity. It is even " +"possible to use another Debian machine with APT or to use a completely " +"different OS and a download tool like wget. Let remote host mean " +"the machine downloading the packages, and target host the one with " +"bad or no connection." +msgstr "" +"Rozwi±zaniem tego problemu jest u¿ycie pojemnych przeno¶nych no¶ników takich " +"jak dyskietka Zip lub dysk SuperDisk. No¶niki te nie s± wystarczaj±co " +"pojemne, by zgromadziæ kompletne archiwum Debiana, ale mo¿na ¶mia³o " +"dopasowaæ podzbiór du¿ego archiwum wystarczaj±cy dla wiêkszo¶ci " +"u¿ytkowników. Pomys³ polega na tym, by u¿yæ programu APT do wygenerowania " +"listy pakietów, które s± wymagane, a nastêpnie pobraniu ich na dysk, u¿ywaj" +"±c innego komputera z w³a¶ciw± zwarto¶ci±. Jest nawet mo¿liwe, by u¿yæ " +"innego komputera z Debianem z zainstalowanym programem APT lub zupe³nie " +"innym systemem operacyjnym i programem narzêdziowym do pobierania plików " +"takim jak wget." + +#. type:

+#: offline.sgml:57 +#, fuzzy +msgid "" +"This is achieved by creatively manipulating the APT configuration file. The " +"essential premis to tell APT to look on a disc for it's archive files. Note " +"that the disc should be formated with a filesystem that can handle long file " +"names such as ext2, fat32 or vfat." +msgstr "" +"Osi±gane jest to przez twórcze manipulowanie plikiem konfiguracyjnym " +"programu APT. Rzecz± niezbêdn± jest poinformowanie programu APT, aby " +"wskazywa³ na dysk z plikami archiwum. Nale¿y zauwa¿yæ, ¿e dysk powinien byæ " +"sformatowany do obs³ugi systemu plików pozwalaj±cego pos³ugiwaæ siê d³ugimi " +"nazwami plików (np. ext2, fat32 albo vfat)." + +#. type: +#: offline.sgml:63 +#, fuzzy +msgid "Using APT on both machines" +msgstr "U¿ywanie programu APT na obu komputerach" + +#. type:

+#: offline.sgml:71 +#, fuzzy +msgid "" +"APT being available on both machines gives the simplest configuration. The " +"basic idea is to place a copy of the status file on the disc and use the " +"remote machine to fetch the latest package files and decide which packages " +"to download. The disk directory structure should look like:" +msgstr "" +"APT bêd±cy do dyspozycji na obu komputerach daje najprostsz± kombinacjê. " +"Zasadniczym pomys³em tej metody jest umieszczenie kopii pliku status na " +"dysku i u¿ycie odleg³ego komputera, aby uzyskaæ najnowsze pliki pakietów i " +"zdecydowaæ, które pakiety trzeba pobraæ. Struktura katalogów na dysku " +"powinna wygl±daæ nastêpuj±co:" + +#. type: +#: offline.sgml:80 +#, fuzzy, no-wrap +msgid "" +" /disc/\n" +" archives/\n" +" partial/\n" +" lists/\n" +" partial/\n" +" status\n" +" sources.list\n" +" apt.conf" +msgstr "" +" /disc/\n" +" archives/\n" +" partial/\n" +" lists/\n" +" partial/\n" +" status\n" +" sources.list\n" +" apt.conf" + +#. type: +#: offline.sgml:88 +#, fuzzy +msgid "The configuration file" +msgstr "Plik konfiguracyjny" + +#. type:

+#: offline.sgml:96 +#, fuzzy +msgid "" +"The configuration file should tell APT to store its files on the disc and to " +"use the configuration files on the disc as well. The sources.list should " +"contain the proper sites that you wish to use from the remote machine, and " +"the status file should be a copy of /var/lib/dpkg/status from the " +"target host. Please note, if you are using a local archive you must " +"use copy URIs, the syntax is identical to file URIs." +msgstr "" +"Plik konfiguracyjny powinien informowaæ program APT, aby przechowywa³ swoje " +"pliki na dysku, a tak¿e u¿ywa³ plików konfiguracyjnych z dysku. Plik sources." +"list powinien zawieraæ prawid³owe odno¶niki, których nale¿y u¿yæ na zdalnym " +"komputerze, a plik status powinien byæ kopi± /var/lib/dpkg/status. " +"Zauwa¿, ¿e je¶li u¿ywasz lokalnego archiwum musisz u¿yæ tych samych " +"odno¶ników o identycznej sk³adni." + +#. type:

+#: offline.sgml:100 +#, fuzzy +msgid "" +"apt.conf must contain the necessary information to make APT use the " +"disc:" +msgstr "" +"apt.conf musi zawieraæ niezbêdne wpisy, by APT korzysta³ z dysku:" + +#. type: +#: offline.sgml:124 +#, fuzzy, no-wrap +msgid "" +" APT\n" +" {\n" +" /* This is not necessary if the two machines are the same arch, it tells\n" +" the remote APT what architecture the target machine is */\n" +" Architecture \"i386\";\n" +" \n" +" Get::Download-Only \"true\";\n" +" };\n" +" \n" +" Dir\n" +" {\n" +" /* Use the disc for state information and redirect the status file from\n" +" the /var/lib/dpkg default */\n" +" State \"/disc/\";\n" +" State::status \"status\";\n" +"\n" +" // Binary caches will be stored locally\n" +" Cache::archives \"/disc/archives/\";\n" +" Cache \"/tmp/\";\n" +" \n" +" // Location of the source list.\n" +" Etc \"/disc/\";\n" +" };" +msgstr "" +" APT\n" +" {\n" +" /* Ten wpis nie jest wymagany, je¶li oba komputery maj± tê sam±\n" +" architekturê; mówi on programowi APT na komputerze pobieraj±cym \n" +" pakiety, jaka jest architektura naszego komputera */\n" +" Architecture \"i386\";\n" +" \n" +" Get::Download-Only \"true\";\n" +" };\n" +" \n" +" Dir\n" +" {\n" +" /* U¿yj katalogu disc na informacje stanu i przekieruj plik status\n" +" z domy¶lnego /var/lib/dpkg */\n" +" State \"/disc/\";\n" +" State::status \"status\";\n" +"\n" +" // Katalog lokalnie przechowywanych pakietów binarnych\n" +" Cache::archives \"/disc/archives/\";\n" +"\n" +" Cache \"/tmp/\";\n" +"\n" +" // Lokalizacja pliku sources.list.\n" +" Etc \"/disc\";\n" +" };" + +#. type:

+#: offline.sgml:129 +#, fuzzy +msgid "" +"More details can be seen by examining the apt.conf man page and the sample " +"configuration file in /usr/share/doc/apt/examples/apt.conf." +msgstr "" +"Wiêcej szczegó³ów mo¿na zobaczyæ w stronie podrêcznika apt.conf i w " +"przyk³adowym pliku konfiguracyjnym /usr/share/doc/apt/examples/apt.conf." + +#. type:

+#: offline.sgml:136 +#, fuzzy +msgid "" +"On the target machine the first thing to do is mount the disc and copy /" +"var/lib/dpkg/status to it. You will also need to create the directories " +"outlined in the Overview, archives/partial/ and lists/partial/ Then take the disc to the remote machine and configure the sources.list. " +"On the remote machine execute the following:" +msgstr "" +"Pierwsz± rzecz±, jak± nale¿y zrobiæ na oddalonym komputerze z Debianem to " +"zamontowaæ dysk i przekopiowaæ na niego plik /var/lib/dpkg/status. " +"Trzeba tak¿e utworzyæ stukturê katalogów przedstawion± we \"Wprowadzeniu\": " +"archives/partial/ i lists/partial/. Nastêpnie niesiemy " +"dysk do oddalonego komputera z szybkim ³±czem i konfigurujemy plik sources." +"list. Na oddalonym komputerze wykonujemy kolejno:" + +#. type: +#: offline.sgml:142 +#, fuzzy, no-wrap +msgid "" +" # export APT_CONFIG=\"/disc/apt.conf\"\n" +" # apt-get update\n" +" [ APT fetches the package files ]\n" +" # apt-get dist-upgrade\n" +" [ APT fetches all the packages needed to upgrade the target machine ]" +msgstr "" +" # export APT_CONFIG=\"/disc/apt.conf\"\n" +" # apt-get update\n" +" [ APT aktualizuje ustawienia ]\n" +" # apt-get dist-upgrade\n" +" [ APT pobiera wszystkie pakiety potrzebne do aktualizacji Twojego systemu ]" + +#. type:

+#: offline.sgml:149 +#, fuzzy +msgid "" +"The dist-upgrade command can be replaced with any-other standard APT " +"commands, particularly dselect-upgrade. You can even use an APT front end " +"such as dselect However this presents a problem in communicating " +"your selections back to the local computer." +msgstr "" +"Polecenie dist-upgrade mo¿na zast±piæ ka¿dym innym podstawowym poleceniem " +"APT, w szczególno¶ci dselect-upgrade. Mo¿na nawet u¿yæ APT jako metody " +"dostêpu dla dselect. Jednak stworzy to problem w przeniesieniu " +"Twoich operacji wyborów z powrotem na lokalny komputer." + +#. type:

+#: offline.sgml:153 +#, fuzzy +msgid "" +"Now the disc contains all of the index files and archives needed to upgrade " +"the target machine. Take the disc back and run:" +msgstr "" +"W tej chwili katalog disc zawiera wszystkie pliki indeksowe oraz archiwa " +"niezbêdne do aktualizacji maszyny z Debianem. Bierzemy dysk z powrotem do " +"siebie i wpisujemy:" + +#. type: +#: offline.sgml:159 +#, fuzzy, no-wrap +msgid "" +" # export APT_CONFIG=\"/disc/apt.conf\"\n" +" # apt-get check\n" +" [ APT generates a local copy of the cache files ]\n" +" # apt-get --no-d -o dir::state::status=/var/lib/dpkg/status dist-upgrade\n" +" [ Or any other APT command ]" +msgstr "" +" # export APT_CONFIG=\"/disc/apt.conf\"\n" +" # apt-get check\n" +" [ APT tworzy lokaln± kopiê plików cache ]\n" +" # apt-get --no-d -o dir::state::status=/var/lib/dpkg/status dist-upgrade\n" +" [ Mo¿e te¿ byæ inne polecenie programu APT ]" + +#. type:

+#: offline.sgml:165 +#, fuzzy +msgid "" +"It is necessary for proper function to re-specify the status file to be the " +"local one. This is very important!" +msgstr "" +"Do prawid³owego dzia³ania koniecznie nale¿y podaæ plik status z lokalnej " +"maszyny. To jest bardzo wa¿ne!" + +#. type:

+#: offline.sgml:172 +#, fuzzy +msgid "" +"If you are using dselect you can do the very risky operation of copying disc/" +"status to /var/lib/dpkg/status so that any selections you made on the remote " +"machine are updated. I highly recommend that people only make selections on " +"the local machine - but this may not always be possible. DO NOT copy the " +"status file if dpkg or APT have been run in the mean time!!" +msgstr "" +"Je¶li u¿ywasz dselect, mo¿esz wykonaæ bardzo ryzykown± operacjê skopiowania " +"disc/status do /var/lib/dpkg/status, tak ¿e wszystkie zmiany, których " +"dokona³e¶ na odleg³ym komputerze, bêd± przeniesione. Mocno zalecam, aby " +"dokonywaæ doboru pakietów tylko na lokalnym komputerze, ale nie zawsze jest " +"to mo¿liwe. NIE podmieniaj pliku status, je¶li dpkg lub APT by³y uruchamiane " +"w miêdzyczasie!!" + +#. type: +#: offline.sgml:178 +#, fuzzy +msgid "Using APT and wget" +msgstr "U¿ywanie programów APT i wget" + +#. type:

+#: offline.sgml:185 +#, fuzzy +msgid "" +"wget is a popular and portable download tool that can run on nearly " +"any machine. Unlike the method above this requires that the Debian machine " +"already has a list of available packages." +msgstr "" +"wget jest popularnym i przeno¶nym programem narzêdziowym pobierania " +"plików, który dzia³a prawie na ka¿dym komputerze. W przeciwieñstwie do " +"metody opisanej powy¿ej ta wymaga, aby na lokalnym komputerze by³a aktualna " +"lista dostêpnych pakietów." + +#. type:

+#: offline.sgml:190 +#, fuzzy +msgid "" +"The basic idea is to create a disc that has only the archive files " +"downloaded from the remote site. This is done by using the --print-uris " +"option to apt-get and then preparing a wget script to actually fetch the " +"packages." +msgstr "" +"Nale¿y stworzyæ katalog disc tylko na pakiety do pobrania z innego " +"komputera. U¿yta zostanie do tego opcja --print-uris programu apt-get, a " +"nastêpnie przygotujemy skrypt dla programu wget, który pobierze w³a¶ciwe " +"pakiety." + +#. type: +#: offline.sgml:196 +#, fuzzy +msgid "Operation" +msgstr "Kolejne kroki" + +#. type:

+#: offline.sgml:200 +#, fuzzy +msgid "" +"Unlike the previous technique no special configuration files are required. " +"We merely use the standard APT commands to generate the file list." +msgstr "" +"W odró¿nieniu od poprzedniej metody dzia³ania ta nie wymaga specjalnych " +"plików konfiguracyjnych. U¿ywamy jedynie podstawowych poleceñ APT, by " +"wygenerowaæ listê plików." + +#. type: +#: offline.sgml:205 +#, fuzzy, no-wrap +msgid "" +" # apt-get dist-upgrade \n" +" [ Press no when prompted, make sure you are happy with the actions ]\n" +" # apt-get -qq --print-uris dist-upgrade > uris\n" +" # awk '{print \"wget -O \" $2 \" \" $1}' < uris > /disc/wget-script" +msgstr "" +" # apt-get dist-upgrade \n" +" [ Wybierz \"no\" po znaku zachêty, upewnij siê, czy to w³a¶ciwy wybór ]\n" +" # apt-get -qq --print-uris dist-upgrade > uris\n" +" # awk '{print \"wget -O \" $2 \" \" $1}' < uris > /disc/wget-script" + +#. type:

+#: offline.sgml:210 +#, fuzzy +msgid "" +"Any command other than dist-upgrade could be used here, including dselect-" +"upgrade." +msgstr "" +"Tak¿e inne opcje ni¿ dist-upgrade mog± tu byæ u¿yte, w³±czaj±c dselect-" +"upgrade." + +#. type:

+#: offline.sgml:216 +#, fuzzy +msgid "" +"The /disc/wget-script file will now contain a list of wget commands to " +"execute in order to fetch the necessary archives. This script should be run " +"with the current directory as the disc's mount point so as to save the " +"output on the disc." +msgstr "" +"Plik skryptu /disc/wget-script bêdzie teraz zawieraæ listê wywo³añ programu " +"wget, niezbêdnych do pobrania potrzebnych archiwów. Skrypt ten nale¿y " +"uruchomiæ w bie¿±cym katalogu o punkcie montowania disc, tak aby tu " +"zapisywa³ dane na dysku." + +#. type:

+#: offline.sgml:219 +#, fuzzy +msgid "The remote machine would do something like" +msgstr "Na oddalonym komputerze nale¿y wykonaæ co¶ takiego" + +#. type: +#: offline.sgml:223 +#, fuzzy, no-wrap +msgid "" +" # cd /disc\n" +" # sh -x ./wget-script\n" +" [ wait.. ]" +msgstr "" +" # cd /disc\n" +" # sh -x ./wget-script\n" +" [ czekaj.. ]" + +#. type: +#: offline.sgml:228 +#, fuzzy +msgid "" +"Once the archives are downloaded and the disc returned to the Debian machine " +"installation can proceed using," +msgstr "" +"Gdy archiwa zostan± pobrane i dysk wróci do komputera z Debianem, " +"instalowanie mo¿na prowadziæ dalej poleceniem:" + +#. type: +#: offline.sgml:230 +#, fuzzy, no-wrap +msgid " # apt-get -o dir::cache::archives=\"/disc/\" dist-upgrade" +msgstr " # apt-get -o dir::cache::archives=\"/disc/\" dist-upgrade" + +#. type:

+#: offline.sgml:234 +#, fuzzy +msgid "Which will use the already fetched archives on the disc." +msgstr "które u¿yje pobranych uprzednio archiwów z dysku." -- cgit v1.2.3 From fec6996f966f4d9d3256cd3b09dc098f3a7b5481 Mon Sep 17 00:00:00 2001 From: David Kalnischkies Date: Mon, 2 Nov 2009 10:11:03 +0100 Subject: and last but not least: convert pt_BR to po4a --- doc/po/pt_BR.po | 8491 ++++++++++++++++++++++++++++++++ doc/pt_BR/addendum/xml_pt_BR.add | 5 + doc/pt_BR/apt.ent.pt_BR | 157 - doc/pt_BR/apt_preferences.pt_BR.5.sgml | 589 --- 4 files changed, 8496 insertions(+), 746 deletions(-) create mode 100644 doc/po/pt_BR.po create mode 100644 doc/pt_BR/addendum/xml_pt_BR.add delete mode 100644 doc/pt_BR/apt.ent.pt_BR delete mode 100644 doc/pt_BR/apt_preferences.pt_BR.5.sgml (limited to 'doc') diff --git a/doc/po/pt_BR.po b/doc/po/pt_BR.po new file mode 100644 index 000000000..e6de8f139 --- /dev/null +++ b/doc/po/pt_BR.po @@ -0,0 +1,8491 @@ +# Translation of apt package man pages +# Copyright (C) YEAR André Luís Lopes +# This file is distributed under the same license as the apt package. +# +# Translators: +# André Luís Lopes +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: apt\n" +"POT-Creation-Date: 2009-10-29 14:19+0100\n" +"PO-Revision-Date: 2004-09-20 17:02+0000\n" +"Last-Translator: André Luís Lopes \n" +"Language-Team: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. type: TH +#: apt.8:17 +#, no-wrap +msgid "apt" +msgstr "" + +#. type: TH +#: apt.8:17 +#, no-wrap +msgid "16 June 1998" +msgstr "" + +#. type: TH +#: apt.8:17 +#, no-wrap +msgid "Debian GNU/Linux" +msgstr "" + +#. type: SH +#: apt.8:18 +#, no-wrap +msgid "NAME" +msgstr "" + +#. type: Plain text +#: apt.8:20 +msgid "apt - Advanced Package Tool" +msgstr "" + +#. type: SH +#: apt.8:20 +#, no-wrap +msgid "SYNOPSIS" +msgstr "" + +#. type: Plain text +#: apt.8:22 +msgid "B" +msgstr "" + +#. type: SH +#: apt.8:22 +#, no-wrap +msgid "DESCRIPTION" +msgstr "" + +#. type: Plain text +#: apt.8:31 +msgid "" +"APT is a management system for software packages. For normal day to day " +"package management there are several frontends available, such as B" +"(8) for the command line or B(8) for the X Window System. Some " +"options are only implemented in B(8) though." +msgstr "" + +#. type: SH +#: apt.8:31 +#, no-wrap +msgid "OPTIONS" +msgstr "" + +#. type: Plain text +#: apt.8:33 apt.8:35 +msgid "None." +msgstr "" + +#. type: SH +#: apt.8:33 +#, no-wrap +msgid "FILES" +msgstr "" + +#. type: SH +#: apt.8:35 +#, no-wrap +msgid "SEE ALSO" +msgstr "" + +#. type: Plain text +#: apt.8:42 +msgid "" +"B(8), B(8), B(5), B(5), " +"B(5), B(8)" +msgstr "" + +#. type: SH +#: apt.8:42 +#, no-wrap +msgid "DIAGNOSTICS" +msgstr "" + +#. type: Plain text +#: apt.8:44 +msgid "apt returns zero on normal operation, decimal 100 on error." +msgstr "" + +#. type: SH +#: apt.8:44 +#, no-wrap +msgid "BUGS" +msgstr "" + +#. type: Plain text +#: apt.8:46 +msgid "This manpage isn't even started." +msgstr "" + +#. type: Plain text +#: apt.8:55 +#, fuzzy +msgid "" +"See Ehttp://bugs.debian.org/aptE. If you wish to report a bug in " +"B, please see I or the " +"B(1) command." +msgstr "" +"\n" +" Bugs</>\n" +" <para>\n" +" Consulte a <ulink url='http://bugs.debian.org/apt'>página de bugs do APT</" +">.\n" +" Caso você queira relatar um bug no APT, por favor consulte o arquivo\n" +" <filename>/usr/share/doc/debian/bug-reporting.txt</> ou o comando " +"&reportbug;.\n" +" </RefSect1>\n" + +#. type: SH +#: apt.8:55 +#, no-wrap +msgid "AUTHOR" +msgstr "" + +#. type: Plain text +#: apt.8:56 +#, fuzzy +msgid "apt was written by the APT team E<lt>apt@packages.debian.orgE<gt>." +msgstr "" +"\n" +" <RefSect1><Title>Author</>\n" +" <para>\n" +" O APT foi escrito pela equipe APT <email>apt@packages.debian.org</>.\n" +" </RefSect1>\n" + +#. type: Plain text +#: apt.ent:2 +msgid "<!-- -*- mode: sgml; mode: fold -*- -->" +msgstr "" + +#. type: Plain text +#: apt.ent:10 +msgid "" +"<!-- Some common paths.. --> <!ENTITY docdir \"/usr/share/doc/apt/\"> <!" +"ENTITY guidesdir \"/usr/share/doc/apt-doc/\"> <!ENTITY configureindex " +"\"<filename>&docdir;examples/configure-index.gz</filename>\"> <!ENTITY " +"aptconfdir \"<filename>/etc/apt.conf</filename>\"> <!ENTITY statedir \"/var/" +"lib/apt\"> <!ENTITY cachedir \"/var/cache/apt\">" +msgstr "" + +#. type: Plain text +#: apt.ent:17 +#, no-wrap +msgid "" +"<!-- Cross references to other man pages -->\n" +"<!ENTITY apt-conf \"<citerefentry>\n" +" <refentrytitle><filename>apt.conf</filename></refentrytitle>\n" +" <manvolnum>5</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:23 +#, no-wrap +msgid "" +"<!ENTITY apt-get \"<citerefentry>\n" +" <refentrytitle><command>apt-get</command></refentrytitle>\n" +" <manvolnum>8</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:29 +#, no-wrap +msgid "" +"<!ENTITY apt-config \"<citerefentry>\n" +" <refentrytitle><command>apt-config</command></refentrytitle>\n" +" <manvolnum>8</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:35 +#, no-wrap +msgid "" +"<!ENTITY apt-cdrom \"<citerefentry>\n" +" <refentrytitle><command>apt-cdrom</command></refentrytitle>\n" +" <manvolnum>8</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:41 +#, no-wrap +msgid "" +"<!ENTITY apt-cache \"<citerefentry>\n" +" <refentrytitle><command>apt-cache</command></refentrytitle>\n" +" <manvolnum>8</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:47 +#, no-wrap +msgid "" +"<!ENTITY apt-preferences \"<citerefentry>\n" +" <refentrytitle><command>apt_preferences</command></refentrytitle>\n" +" <manvolnum>5</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:53 +#, no-wrap +msgid "" +"<!ENTITY apt-key \"<citerefentry>\n" +" <refentrytitle><command>apt-key</command></refentrytitle>\n" +" <manvolnum>8</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:59 +#, no-wrap +msgid "" +"<!ENTITY apt-secure \"<citerefentry>\n" +" <refentrytitle>apt-secure</refentrytitle>\n" +" <manvolnum>8</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:65 +#, no-wrap +msgid "" +"<!ENTITY apt-ftparchive \"<citerefentry>\n" +" <refentrytitle><filename>apt-ftparchive</filename></refentrytitle>\n" +" <manvolnum>1</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:72 +#, no-wrap +msgid "" +"<!ENTITY sources-list \"<citerefentry>\n" +" <refentrytitle><filename>sources.list</filename></refentrytitle>\n" +" <manvolnum>5</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:78 +#, no-wrap +msgid "" +"<!ENTITY reportbug \"<citerefentry>\n" +" <refentrytitle><command>reportbug</command></refentrytitle>\n" +" <manvolnum>1</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:84 +#, no-wrap +msgid "" +"<!ENTITY dpkg \"<citerefentry>\n" +" <refentrytitle><command>dpkg</command></refentrytitle>\n" +" <manvolnum>1</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:90 +#, no-wrap +msgid "" +"<!ENTITY dpkg-buildpackage \"<citerefentry>\n" +" <refentrytitle><command>dpkg-buildpackage</command></refentrytitle>\n" +" <manvolnum>1</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:96 +#, no-wrap +msgid "" +"<!ENTITY gzip \"<citerefentry>\n" +" <refentrytitle><command>gzip</command></refentrytitle>\n" +" <manvolnum>1</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:102 +#, no-wrap +msgid "" +"<!ENTITY dpkg-scanpackages \"<citerefentry>\n" +" <refentrytitle><command>dpkg-scanpackages</command></refentrytitle>\n" +" <manvolnum>1</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:108 +#, no-wrap +msgid "" +"<!ENTITY dpkg-scansources \"<citerefentry>\n" +" <refentrytitle><command>dpkg-scansources</command></refentrytitle>\n" +" <manvolnum>1</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:114 +#, no-wrap +msgid "" +"<!ENTITY dselect \"<citerefentry>\n" +" <refentrytitle><command>dselect</command></refentrytitle>\n" +" <manvolnum>1</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:120 +#, no-wrap +msgid "" +"<!ENTITY aptitude \"<citerefentry>\n" +" <refentrytitle><command>aptitude</command></refentrytitle>\n" +" <manvolnum>8</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:126 +#, no-wrap +msgid "" +"<!ENTITY synaptic \"<citerefentry>\n" +" <refentrytitle><command>synaptic</command></refentrytitle>\n" +" <manvolnum>8</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:132 +#, no-wrap +msgid "" +"<!ENTITY debsign \"<citerefentry>\n" +" <refentrytitle><command>debsign</command></refentrytitle>\n" +" <manvolnum>1</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:138 +#, no-wrap +msgid "" +"<!ENTITY debsig-verify \"<citerefentry>\n" +" <refentrytitle><command>debsig-verify</command></refentrytitle>\n" +" <manvolnum>1</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:144 +#, no-wrap +msgid "" +"<!ENTITY gpg \"<citerefentry>\n" +" <refentrytitle><command>gpg</command></refentrytitle>\n" +" <manvolnum>1</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:150 +#, no-wrap +msgid "" +"<!ENTITY gnome-apt \"<citerefentry>\n" +" <refentrytitle><command>gnome-apt</command></refentrytitle>\n" +" <manvolnum>1</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:156 +#, no-wrap +msgid "" +"<!ENTITY wajig \"<citerefentry>\n" +" <refentrytitle><command>wajig</command></refentrytitle>\n" +" <manvolnum>1</manvolnum>\n" +" </citerefentry>\"\n" +">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:168 +#, fuzzy, no-wrap +msgid "" +"<!-- Boiler plate docinfo section -->\n" +"<!ENTITY apt-docinfo \"\n" +" <refentryinfo>\n" +" <address><email>apt@packages.debian.org</email></address>\n" +" <author>\n" +" <firstname>Jason</firstname> <surname>Gunthorpe</surname>\n" +" <contrib></contrib>\n" +" </author>\n" +" <copyright><year>1998-2001</year> <holder>Jason Gunthorpe</holder></copyright>\n" +" <date>28 October 2008</date>\n" +" <productname>Linux</productname>\n" +msgstr "" +"\n" +" <docinfo>\n" +" <address><email>apt@packages.debian.org</></address>\n" +" <author><firstname>Jason</> <surname>Gunthorpe</></>\n" +" <copyright><year>1998-2001</> <holder>Jason Gunthorpe</></>\n" +" <date>12 Março 2001</>\n" +" </docinfo>\n" + +#. type: Plain text +#: apt.ent:171 +#, no-wrap +msgid "" +" </refentryinfo>\n" +"\"> \n" +msgstr "" + +#. type: Plain text +#: apt.ent:177 +#, no-wrap +msgid "" +"<!ENTITY apt-email \"\n" +" <address>\n" +" <email>apt@packages.debian.org</email>\n" +" </address>\n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:185 +#, no-wrap +msgid "" +"<!ENTITY apt-author.jgunthorpe \"\n" +" <author>\n" +" <firstname>Jason</firstname>\n" +" <surname>Gunthorpe</surname>\n" +" <contrib></contrib>\n" +" </author>\n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:193 +#, no-wrap +msgid "" +"<!ENTITY apt-author.moconnor \"\n" +" <author>\n" +" <firstname>Mike</firstname>\n" +" <surname>O'Connor</surname>\n" +" <contrib></contrib>\n" +" </author>\n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:200 +#, no-wrap +msgid "" +"<!ENTITY apt-author.team \"\n" +" <author>\n" +" <othername>APT team</othername>\n" +" <contrib></contrib>\n" +" </author>\n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:204 apt.ent:215 +#, no-wrap +msgid "" +"<!ENTITY apt-product \"\n" +" <productname>Linux</productname>\n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:211 +#, no-wrap +msgid "" +"<!ENTITY apt-copyright \"\n" +" <copyright>\n" +" <holder>Jason Gunthorpe</holder>\n" +" <year>1998-2001</year>\n" +" </copyright>\n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:221 +#, no-wrap +msgid "" +"<!ENTITY apt-qapage \"\n" +"\t<para>\n" +"\t\t<ulink url='http://packages.qa.debian.org/a/apt.html'>QA Page</ulink>\n" +"\t</para>\n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:232 +#, fuzzy, no-wrap +msgid "" +"<!-- Boiler plate Bug reporting section -->\n" +"<!ENTITY manbugs \"\n" +" <refsect1><title>Bugs\n" +" APT bug page. \n" +" If you wish to report a bug in APT, please see\n" +" /usr/share/doc/debian/bug-reporting.txt or the\n" +" &reportbug; command.\n" +" \n" +" \n" +"\">\n" +msgstr "" +"\n" +" Bugs</>\n" +" <para>\n" +" Consulte a <ulink url='http://bugs.debian.org/apt'>página de bugs do APT</>.\n" +" Caso você queira relatar um bug no APT, por favor consulte o arquivo\n" +" <filename>/usr/share/doc/debian/bug-reporting.txt</> ou o comando &reportbug;.\n" +" </RefSect1>\n" + +#. type: Plain text +#: apt.ent:240 +#, fuzzy, no-wrap +msgid "" +"<!-- Boiler plate Author section -->\n" +"<!ENTITY manauthor \"\n" +" <refsect1><title>Author\n" +" APT was written by the APT team apt@packages.debian.org.\n" +" \n" +" \n" +"\">\n" +msgstr "" +"\n" +" Author</>\n" +" <para>\n" +" O APT foi escrito pela equipe APT <email>apt@packages.debian.org</>.\n" +" </RefSect1>\n" + +#. type: Plain text +#: apt.ent:250 +#, no-wrap +msgid "" +"<!-- Should be used within the option section of the text to\n" +" put in the blurb about -h, -v, -c and -o -->\n" +"<!ENTITY apt-commonoptions \"\n" +" <varlistentry><term><option>-h</option></term>\n" +" <term><option>--help</option></term>\n" +" <listitem><para>Show a short usage summary.\n" +" </para>\n" +" </listitem>\n" +" </varlistentry>\n" +msgstr "" + +#. type: Plain text +#: apt.ent:258 +#, no-wrap +msgid "" +" <varlistentry>\n" +" <term><option>-v</option></term>\n" +" <term><option>--version</option></term>\n" +" <listitem><para>Show the program version.\n" +" </para>\n" +" </listitem>\n" +" </varlistentry>\n" +msgstr "" + +#. type: Plain text +#: apt.ent:268 +#, no-wrap +msgid "" +" <varlistentry>\n" +" <term><option>-c</option></term>\n" +" <term><option>--config-file</option></term>\n" +" <listitem><para>Configuration File; Specify a configuration file to use. \n" +" The program will read the default configuration file and then this \n" +" configuration file. See &apt-conf; for syntax information. \n" +" </para>\n" +" </listitem>\n" +" </varlistentry>\n" +msgstr "" + +#. type: Plain text +#: apt.ent:280 +#, no-wrap +msgid "" +" <varlistentry>\n" +" <term><option>-o</option></term>\n" +" <term><option>--option</option></term>\n" +" <listitem><para>Set a Configuration Option; This will set an arbitrary\n" +" configuration option. The syntax is <option>-o Foo::Bar=bar</option>.\n" +" <option>-o</option> and <option>--option</option> can be used multiple\n" +" times to set different options.\n" +" </para>\n" +" </listitem>\n" +" </varlistentry>\n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:291 +#, fuzzy, no-wrap +msgid "" +"<!-- Should be used within the option section of the text to\n" +" put in the blurb about -h, -v, -c and -o -->\n" +"<!ENTITY apt-cmdblurb \"\n" +" <para>All command line options may be set using the configuration file, the\n" +" descriptions indicate the configuration option to set. For boolean\n" +" options you can override the config file by using something like \n" +" <option>-f-</option>,<option>--no-f</option>, <option>-f=no</option>\n" +" or several other variations.\n" +" </para>\n" +"\">\n" +msgstr "" +"\n" +" <para>\n" +" Todas as opções de linha de comando podem ser definidas usando o\n" +" arquivo de configuração, as descrições indicam a opção de configuração\n" +" a ser definida. Para opções booleanas você pode sobrepor o arquivo de\n" +" configuração usando algo como <option/-f-/,<option/--no-f/,\n" +" <option/-f=no/ ou diversas outras variantes.\n" +" </para>\n" + +#. type: Plain text +#: apt.ent:297 +#, no-wrap +msgid "" +"<!ENTITY file-aptconf \"\n" +" <varlistentry><term><filename>/etc/apt/apt.conf</filename></term>\n" +" <listitem><para>APT configuration file.\n" +" Configuration Item: <literal>Dir::Etc::Main</literal>.</para></listitem>\n" +" </varlistentry>\n" +msgstr "" + +#. type: Plain text +#: apt.ent:303 +#, no-wrap +msgid "" +" <varlistentry><term><filename>/etc/apt/apt.conf.d/</filename></term>\n" +" <listitem><para>APT configuration file fragments.\n" +" Configuration Item: <literal>Dir::Etc::Parts</literal>.</para></listitem>\n" +" </varlistentry>\n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:309 +#, no-wrap +msgid "" +"<!ENTITY file-cachearchives \"\n" +" <varlistentry><term><filename>&cachedir;/archives/</filename></term>\n" +" <listitem><para>Storage area for retrieved package files.\n" +" Configuration Item: <literal>Dir::Cache::Archives</literal>.</para></listitem>\n" +" </varlistentry>\n" +msgstr "" + +#. type: Plain text +#: apt.ent:315 +#, no-wrap +msgid "" +" <varlistentry><term><filename>&cachedir;/archives/partial/</filename></term>\n" +" <listitem><para>Storage area for package files in transit.\n" +" Configuration Item: <literal>Dir::Cache::Archives</literal> (implicit partial). </para></listitem>\n" +" </varlistentry>\n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:325 +#, no-wrap +msgid "" +"<!ENTITY file-preferences \"\n" +" <varlistentry><term><filename>/etc/apt/preferences</filename></term>\n" +" <listitem><para>Version preferences file.\n" +" This is where you would specify "pinning",\n" +" i.e. a preference to get certain packages\n" +" from a separate source\n" +" or from a different version of a distribution.\n" +" Configuration Item: <literal>Dir::Etc::Preferences</literal>.</para></listitem>\n" +" </varlistentry>\n" +msgstr "" + +#. type: Plain text +#: apt.ent:331 +#, no-wrap +msgid "" +" <varlistentry><term><filename>/etc/apt/preferences.d/</filename></term>\n" +" <listitem><para>File fragments for the version preferences.\n" +" Configuration Item: <literal>Dir::Etc::PreferencesParts</literal>.</para></listitem>\n" +" </varlistentry>\n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:337 +#, no-wrap +msgid "" +"<!ENTITY file-sourceslist \"\n" +" <varlistentry><term><filename>/etc/apt/sources.list</filename></term>\n" +" <listitem><para>Locations to fetch packages from.\n" +" Configuration Item: <literal>Dir::Etc::SourceList</literal>.</para></listitem>\n" +" </varlistentry>\n" +msgstr "" + +#. type: Plain text +#: apt.ent:343 +#, no-wrap +msgid "" +" <varlistentry><term><filename>/etc/apt/sources.list.d/</filename></term>\n" +" <listitem><para>File fragments for locations to fetch packages from.\n" +" Configuration Item: <literal>Dir::Etc::SourceParts</literal>.</para></listitem>\n" +" </varlistentry>\n" +"\">\n" +msgstr "" + +#. type: Plain text +#: apt.ent:350 +#, no-wrap +msgid "" +"<!ENTITY file-statelists \"\n" +" <varlistentry><term><filename>&statedir;/lists/</filename></term>\n" +" <listitem><para>Storage area for state information for each package resource specified in\n" +" &sources-list;\n" +" Configuration Item: <literal>Dir::State::Lists</literal>.</para></listitem>\n" +" </varlistentry>\n" +msgstr "" + +#. type: Plain text +#: apt.ent:355 +#, no-wrap +msgid "" +" <varlistentry><term><filename>&statedir;/lists/partial/</filename></term>\n" +" <listitem><para>Storage area for state information in transit.\n" +" Configuration Item: <literal>Dir::State::Lists</literal> (implicit partial).</para></listitem>\n" +" </varlistentry>\n" +"\">\n" +msgstr "" + +#. The last update date +#. type: Content of: <refentry><refentryinfo> +#: apt-cache.8.xml:13 apt-config.8.xml:13 apt-extracttemplates.1.xml:13 +#: apt-ftparchive.1.xml:13 apt-sortpkgs.1.xml:13 sources.list.5.xml:13 +msgid "" +"&apt-author.jgunthorpe; &apt-author.team; &apt-email; &apt-product; <date>29 " +"February 2004</date>" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-cache.8.xml:22 apt-cache.8.xml:29 +msgid "apt-cache" +msgstr "" + +#. type: Content of: <refentry><refmeta><manvolnum> +#: apt-cache.8.xml:23 apt-cdrom.8.xml:22 apt-config.8.xml:23 apt-get.8.xml:23 +#: apt-key.8.xml:15 apt-mark.8.xml:23 apt-secure.8.xml:15 +msgid "8" +msgstr "" + +#. type: Content of: <refentry><refmeta><refmiscinfo> +#: apt-cache.8.xml:24 apt-cdrom.8.xml:23 apt-config.8.xml:24 +#: apt-extracttemplates.1.xml:24 apt-ftparchive.1.xml:24 apt-get.8.xml:24 +#: apt-key.8.xml:16 apt-mark.8.xml:24 apt-secure.8.xml:16 +#: apt-sortpkgs.1.xml:24 apt.conf.5.xml:30 apt_preferences.5.xml:23 +#: sources.list.5.xml:24 +msgid "APT" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-cache.8.xml:30 +msgid "APT package handling utility -- cache manipulator" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-cache.8.xml:36 +msgid "" +"<command>apt-cache</command> <arg><option>-hvsn</option></arg> <arg><option>-" +"o=<replaceable>config string</replaceable></option></arg> <arg><option>-" +"c=<replaceable>file</replaceable></option></arg> <group choice=\"req\"> " +"<arg>add <arg choice=\"plain\" rep=\"repeat\"><replaceable>file</" +"replaceable></arg></arg> <arg>gencaches</arg> <arg>showpkg <arg choice=" +"\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable></arg></arg> " +"<arg>showsrc <arg choice=\"plain\" rep=\"repeat\"><replaceable>pkg</" +"replaceable></arg></arg> <arg>stats</arg> <arg>dump</arg> <arg>dumpavail</" +"arg> <arg>unmet</arg> <arg>search <arg choice=\"plain\"><replaceable>regex</" +"replaceable></arg></arg> <arg>show <arg choice=\"plain\" rep=\"repeat" +"\"><replaceable>pkg</replaceable></arg></arg> <arg>depends <arg choice=" +"\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable></arg></arg> " +"<arg>rdepends <arg choice=\"plain\" rep=\"repeat\"><replaceable>pkg</" +"replaceable></arg></arg> <arg>pkgnames <arg choice=\"plain" +"\"><replaceable>prefix</replaceable></arg></arg> <arg>dotty <arg choice=" +"\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable></arg></arg> " +"<arg>xvcg <arg choice=\"plain\" rep=\"repeat\"><replaceable>pkg</" +"replaceable></arg></arg> <arg>policy <arg choice=\"plain\" rep=\"repeat" +"\"><replaceable>pkgs</replaceable></arg></arg> <arg>madison <arg choice=" +"\"plain\" rep=\"repeat\"><replaceable>pkgs</replaceable></arg></arg> </group>" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-cache.8.xml:62 apt-cdrom.8.xml:47 apt-config.8.xml:47 +#: apt-extracttemplates.1.xml:43 apt-ftparchive.1.xml:55 apt-get.8.xml:125 +#: apt-key.8.xml:34 apt-mark.8.xml:52 apt-secure.8.xml:40 +#: apt-sortpkgs.1.xml:44 apt.conf.5.xml:39 apt_preferences.5.xml:33 +#: sources.list.5.xml:33 +#, fuzzy +msgid "Description" +msgstr "Descrição" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cache.8.xml:63 +msgid "" +"<command>apt-cache</command> performs a variety of operations on APT's " +"package cache. <command>apt-cache</command> does not manipulate the state of " +"the system but does provide operations to search and generate interesting " +"output from the package metadata." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cache.8.xml:68 apt-get.8.xml:131 +msgid "" +"Unless the <option>-h</option>, or <option>--help</option> option is given, " +"one of the commands below must be present." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:72 +msgid "add <replaceable>file(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:73 +msgid "" +"<literal>add</literal> adds the named package index files to the package " +"cache. This is for debugging only." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:77 +msgid "gencaches" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:78 +msgid "" +"<literal>gencaches</literal> performs the same operation as <command>apt-get " +"check</command>. It builds the source and package caches from the sources in " +"&sources-list; and from <filename>/var/lib/dpkg/status</filename>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:84 +msgid "showpkg <replaceable>pkg(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:85 +msgid "" +"<literal>showpkg</literal> displays information about the packages listed on " +"the command line. Remaining arguments are package names. The available " +"versions and reverse dependencies of each package listed are listed, as well " +"as forward dependencies for each version. Forward (normal) dependencies are " +"those packages upon which the package in question depends; reverse " +"dependencies are those packages that depend upon the package in question. " +"Thus, forward dependencies must be satisfied for a package, but reverse " +"dependencies need not be. For instance, <command>apt-cache showpkg " +"libreadline2</command> would produce output similar to the following:" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><informalexample><programlisting> +#: apt-cache.8.xml:97 +#, no-wrap +msgid "" +"Package: libreadline2\n" +"Versions: 2.1-12(/var/state/apt/lists/foo_Packages),\n" +"Reverse Depends: \n" +" libreadlineg2,libreadline2\n" +" libreadline2-altdev,libreadline2\n" +"Dependencies:\n" +"2.1-12 - libc5 (2 5.4.0-0) ncurses3.0 (0 (null))\n" +"Provides:\n" +"2.1-12 - \n" +"Reverse Provides: \n" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:109 +msgid "" +"Thus it may be seen that libreadline2, version 2.1-12, depends on libc5 and " +"ncurses3.0 which must be installed for libreadline2 to work. In turn, " +"libreadlineg2 and libreadline2-altdev depend on libreadline2. If " +"libreadline2 is installed, libc5 and ncurses3.0 (and ldso) must also be " +"installed; libreadlineg2 and libreadline2-altdev do not have to be " +"installed. For the specific meaning of the remainder of the output it is " +"best to consult the apt source code." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:118 +msgid "stats" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:118 +msgid "" +"<literal>stats</literal> displays some statistics about the cache. No " +"further arguments are expected. Statistics reported are:" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:121 +msgid "" +"<literal>Total package names</literal> is the number of package names found " +"in the cache." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:125 +msgid "" +"<literal>Normal packages</literal> is the number of regular, ordinary " +"package names; these are packages that bear a one-to-one correspondence " +"between their names and the names used by other packages for them in " +"dependencies. The majority of packages fall into this category." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:131 +msgid "" +"<literal>Pure virtual packages</literal> is the number of packages that " +"exist only as a virtual package name; that is, packages only \"provide\" the " +"virtual package name, and no package actually uses the name. For instance, " +"\"mail-transport-agent\" in the Debian GNU/Linux system is a pure virtual " +"package; several packages provide \"mail-transport-agent\", but there is no " +"package named \"mail-transport-agent\"." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:139 +msgid "" +"<literal>Single virtual packages</literal> is the number of packages with " +"only one package providing a particular virtual package. For example, in the " +"Debian GNU/Linux system, \"X11-text-viewer\" is a virtual package, but only " +"one package, xless, provides \"X11-text-viewer\"." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:145 +msgid "" +"<literal>Mixed virtual packages</literal> is the number of packages that " +"either provide a particular virtual package or have the virtual package name " +"as the package name. For instance, in the Debian GNU/Linux system, \"debconf" +"\" is both an actual package, and provided by the debconf-tiny package." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:152 +msgid "" +"<literal>Missing</literal> is the number of package names that were " +"referenced in a dependency but were not provided by any package. Missing " +"packages may be an evidence if a full distribution is not accessed, or if a " +"package (real or virtual) has been dropped from the distribution. Usually " +"they are referenced from Conflicts or Breaks statements." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:159 +msgid "" +"<literal>Total distinct</literal> versions is the number of package versions " +"found in the cache; this value is therefore at least equal to the number of " +"total package names. If more than one distribution (both \"stable\" and " +"\"unstable\", for instance), is being accessed, this value can be " +"considerably larger than the number of total package names." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> +#: apt-cache.8.xml:166 +msgid "" +"<literal>Total dependencies</literal> is the number of dependency " +"relationships claimed by all of the packages in the cache." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:173 +msgid "showsrc <replaceable>pkg(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:174 +msgid "" +"<literal>showsrc</literal> displays all the source package records that " +"match the given package names. All versions are shown, as well as all " +"records that declare the name to be a Binary." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:179 apt-config.8.xml:84 +msgid "dump" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:180 +msgid "" +"<literal>dump</literal> shows a short listing of every package in the cache. " +"It is primarily for debugging." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:184 +msgid "dumpavail" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:185 +msgid "" +"<literal>dumpavail</literal> prints out an available list to stdout. This is " +"suitable for use with &dpkg; and is used by the &dselect; method." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:189 +msgid "unmet" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:190 +msgid "" +"<literal>unmet</literal> displays a summary of all unmet dependencies in the " +"package cache." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:194 +msgid "show <replaceable>pkg(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:195 +msgid "" +"<literal>show</literal> performs a function similar to <command>dpkg --print-" +"avail</command>; it displays the package records for the named packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:200 +msgid "search <replaceable>regex [ regex ... ]</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:201 +msgid "" +"<literal>search</literal> performs a full text search on all available " +"package lists for the POSIX regex pattern given, see " +"<citerefentry><refentrytitle><command>regex</command></refentrytitle> " +"<manvolnum>7</manvolnum></citerefentry>. It searches the package names and " +"the descriptions for an occurrence of the regular expression and prints out " +"the package name and the short description, including virtual package " +"names. If <option>--full</option> is given then output identical to " +"<literal>show</literal> is produced for each matched package, and if " +"<option>--names-only</option> is given then the long description is not " +"searched, only the package name is." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:214 +msgid "" +"Separate arguments can be used to specify multiple search patterns that are " +"and'ed together." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:218 +msgid "depends <replaceable>pkg(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:219 +msgid "" +"<literal>depends</literal> shows a listing of each dependency a package has " +"and all the possible other packages that can fulfill that dependency." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:223 +#, fuzzy +msgid "rdepends <replaceable>pkg(s)</replaceable>" +msgstr "" +"<programlisting>\n" +"apt-get install <replaceable>pacote</replaceable>/testing\n" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:224 +msgid "" +"<literal>rdepends</literal> shows a listing of each reverse dependency a " +"package has." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:228 +msgid "pkgnames <replaceable>[ prefix ]</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:229 +msgid "" +"This command prints the name of each package APT knows. The optional " +"argument is a prefix match to filter the name list. The output is suitable " +"for use in a shell tab complete function and the output is generated " +"extremely quickly. This command is best used with the <option>--generate</" +"option> option." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:234 +msgid "" +"Note that a package which APT knows of is not necessarily available to " +"download, installable or installed, e.g. virtual packages are also listed in " +"the generated list." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:239 +msgid "dotty <replaceable>pkg(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:240 +msgid "" +"<literal>dotty</literal> takes a list of packages on the command line and " +"generates output suitable for use by dotty from the <ulink url=\"http://www." +"research.att.com/sw/tools/graphviz/\">GraphViz</ulink> package. The result " +"will be a set of nodes and edges representing the relationships between the " +"packages. By default the given packages will trace out all dependent " +"packages; this can produce a very large graph. To limit the output to only " +"the packages listed on the command line, set the <literal>APT::Cache::" +"GivenOnly</literal> option." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:249 +msgid "" +"The resulting nodes will have several shapes; normal packages are boxes, " +"pure provides are triangles, mixed provides are diamonds, missing packages " +"are hexagons. Orange boxes mean recursion was stopped [leaf packages], blue " +"lines are pre-depends, green lines are conflicts." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:254 +msgid "Caution, dotty cannot graph larger sets of packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:257 +msgid "xvcg <replaceable>pkg(s)</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:258 +msgid "" +"The same as <literal>dotty</literal>, only for xvcg from the <ulink url=" +"\"http://rw4.cs.uni-sb.de/users/sander/html/gsvcg1.html\">VCG tool</ulink>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:262 +msgid "policy <replaceable>[ pkg(s) ]</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:263 +msgid "" +"<literal>policy</literal> is meant to help debug issues relating to the " +"preferences file. With no arguments it will print out the priorities of each " +"source. Otherwise it prints out detailed information about the priority " +"selection of the named package." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:269 +msgid "madison <replaceable>/[ pkg(s) ]</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:270 +msgid "" +"<literal>apt-cache</literal>'s <literal>madison</literal> command attempts " +"to mimic the output format and a subset of the functionality of the Debian " +"archive management tool, <literal>madison</literal>. It displays available " +"versions of a package in a tabular format. Unlike the original " +"<literal>madison</literal>, it can only display information for the " +"architecture for which APT has retrieved package lists (<literal>APT::" +"Architecture</literal>)." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:281 apt-config.8.xml:93 apt-extracttemplates.1.xml:56 +#: apt-ftparchive.1.xml:492 apt-get.8.xml:319 apt-mark.8.xml:89 +#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:456 apt.conf.5.xml:478 +msgid "options" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:285 +msgid "<option>-p</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:285 +msgid "<option>--pkg-cache</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:286 +msgid "" +"Select the file to store the package cache. The package cache is the primary " +"cache used by all operations. Configuration Item: <literal>Dir::Cache::" +"pkgcache</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:291 apt-ftparchive.1.xml:535 apt-get.8.xml:376 +#: apt-sortpkgs.1.xml:58 +msgid "<option>-s</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:291 +msgid "<option>--src-cache</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:292 +msgid "" +"Select the file to store the source cache. The source is used only by " +"<literal>gencaches</literal> and it stores a parsed version of the package " +"information from remote sources. When building the package cache the source " +"cache is used to avoid reparsing all of the package files. Configuration " +"Item: <literal>Dir::Cache::srcpkgcache</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:299 apt-ftparchive.1.xml:509 apt-get.8.xml:366 +msgid "<option>-q</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:299 apt-ftparchive.1.xml:509 apt-get.8.xml:366 +msgid "<option>--quiet</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:300 +msgid "" +"Quiet; produces output suitable for logging, omitting progress indicators. " +"More q's will produce more quietness up to a maximum of 2. You can also use " +"<option>-q=#</option> to set the quietness level, overriding the " +"configuration file. Configuration Item: <literal>quiet</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:306 +msgid "<option>-i</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:306 +msgid "<option>--important</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:307 +msgid "" +"Print only important dependencies; for use with unmet and depends. Causes " +"only Depends and Pre-Depends relations to be printed. Configuration Item: " +"<literal>APT::Cache::Important</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:312 apt-cdrom.8.xml:121 apt-get.8.xml:333 +msgid "<option>-f</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:312 +msgid "<option>--full</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:313 +msgid "" +"Print full package records when searching. Configuration Item: " +"<literal>APT::Cache::ShowFull</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:317 apt-cdrom.8.xml:131 +msgid "<option>-a</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:317 +msgid "<option>--all-versions</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:318 +msgid "" +"Print full records for all available versions. This is the default; to turn " +"it off, use <option>--no-all-versions</option>. If <option>--no-all-" +"versions</option> is specified, only the candidate version will displayed " +"(the one which would be selected for installation). This option is only " +"applicable to the <literal>show</literal> command. Configuration Item: " +"<literal>APT::Cache::AllVersions</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:326 +msgid "<option>-g</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:326 +msgid "<option>--generate</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:327 +msgid "" +"Perform automatic package cache regeneration, rather than use the cache as " +"it is. This is the default; to turn it off, use <option>--no-generate</" +"option>. Configuration Item: <literal>APT::Cache::Generate</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:332 +msgid "<option>--names-only</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:332 apt-cdrom.8.xml:139 +msgid "<option>-n</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:333 +msgid "" +"Only search on the package names, not the long descriptions. Configuration " +"Item: <literal>APT::Cache::NamesOnly</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:337 +msgid "<option>--all-names</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:338 +msgid "" +"Make <literal>pkgnames</literal> print all names, including virtual packages " +"and missing dependencies. Configuration Item: <literal>APT::Cache::" +"AllNames</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:343 +msgid "<option>--recurse</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:344 +msgid "" +"Make <literal>depends</literal> and <literal>rdepends</literal> recursive so " +"that all packages mentioned are printed once. Configuration Item: " +"<literal>APT::Cache::RecurseDepends</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cache.8.xml:349 +msgid "<option>--installed</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml:351 +msgid "" +"Limit the output of <literal>depends</literal> and <literal>rdepends</" +"literal> to packages which are currently installed. Configuration Item: " +"<literal>APT::Cache::Installed</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist> +#: apt-cache.8.xml:356 apt-cdrom.8.xml:150 apt-config.8.xml:98 +#: apt-extracttemplates.1.xml:67 apt-ftparchive.1.xml:547 apt-get.8.xml:554 +#: apt-sortpkgs.1.xml:64 +msgid "&apt-commonoptions;" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-cache.8.xml:361 apt-get.8.xml:559 apt-key.8.xml:138 apt-mark.8.xml:122 +#: apt.conf.5.xml:988 apt_preferences.5.xml:615 +msgid "Files" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist> +#: apt-cache.8.xml:363 +msgid "&file-sourceslist; &file-statelists;" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-cache.8.xml:368 apt-cdrom.8.xml:155 apt-config.8.xml:103 +#: apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:563 apt-get.8.xml:569 +#: apt-key.8.xml:162 apt-mark.8.xml:133 apt-secure.8.xml:181 +#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:994 apt_preferences.5.xml:622 +#: sources.list.5.xml:233 +#, fuzzy +msgid "See Also" +msgstr "Consulte também" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cache.8.xml:369 +msgid "&apt-conf;, &sources-list;, &apt-get;" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-cache.8.xml:373 apt-cdrom.8.xml:160 apt-config.8.xml:108 +#: apt-extracttemplates.1.xml:78 apt-ftparchive.1.xml:567 apt-get.8.xml:575 +#: apt-mark.8.xml:137 apt-sortpkgs.1.xml:73 +msgid "Diagnostics" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cache.8.xml:374 +msgid "" +"<command>apt-cache</command> returns zero on normal operation, decimal 100 " +"on error." +msgstr "" + +#. type: Content of: <refentry><refentryinfo> +#: apt-cdrom.8.xml:13 +msgid "" +"&apt-author.jgunthorpe; &apt-author.team; &apt-email; &apt-product; <date>14 " +"February 2004</date>" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-cdrom.8.xml:21 apt-cdrom.8.xml:28 +msgid "apt-cdrom" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-cdrom.8.xml:29 +msgid "APT CDROM management utility" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-cdrom.8.xml:35 +msgid "" +"<command>apt-cdrom</command> <arg><option>-hvrmfan</option></arg> " +"<arg><option>-d=<replaceable>cdrom mount point</replaceable></option></arg> " +"<arg><option>-o=<replaceable>config string</replaceable></option></arg> " +"<arg><option>-c=<replaceable>file</replaceable></option></arg> <group> " +"<arg>add</arg> <arg>ident</arg> </group>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cdrom.8.xml:48 +msgid "" +"<command>apt-cdrom</command> is used to add a new CDROM to APTs list of " +"available sources. <command>apt-cdrom</command> takes care of determining " +"the structure of the disc as well as correcting for several possible mis-" +"burns and verifying the index files." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cdrom.8.xml:55 +msgid "" +"It is necessary to use <command>apt-cdrom</command> to add CDs to the APT " +"system, it cannot be done by hand. Furthermore each disk in a multi-cd set " +"must be inserted and scanned separately to account for possible mis-burns." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:65 +msgid "add" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:66 +msgid "" +"<literal>add</literal> is used to add a new disc to the source list. It will " +"unmount the CDROM device, prompt for a disk to be inserted and then procceed " +"to scan it and copy the index files. If the disc does not have a proper " +"<filename>disk</filename> directory you will be prompted for a descriptive " +"title." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:74 +msgid "" +"APT uses a CDROM ID to track which disc is currently in the drive and " +"maintains a database of these IDs in <filename>&statedir;/cdroms.list</" +"filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:81 +msgid "ident" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:82 +msgid "" +"A debugging tool to report the identity of the current disc as well as the " +"stored file name" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cdrom.8.xml:61 +msgid "" +"Unless the <option>-h</option>, or <option>--help</option> option is given " +"one of the commands below must be present. <placeholder type=\"variablelist" +"\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-cdrom.8.xml:91 +msgid "Options" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:95 apt-ftparchive.1.xml:503 apt-get.8.xml:328 +msgid "<option>-d</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:95 +msgid "<option>--cdrom</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:96 +msgid "" +"Mount point; specify the location to mount the cdrom. This mount point must " +"be listed in <filename>/etc/fstab</filename> and properly configured. " +"Configuration Item: <literal>Acquire::cdrom::mount</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:104 +msgid "<option>-r</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:104 +msgid "<option>--rename</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:105 +msgid "" +"Rename a disc; change the label of a disk or override the disks given label. " +"This option will cause <command>apt-cdrom</command> to prompt for a new " +"label. Configuration Item: <literal>APT::CDROM::Rename</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:113 apt-get.8.xml:347 +msgid "<option>-m</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:113 +msgid "<option>--no-mount</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:114 +msgid "" +"No mounting; prevent <command>apt-cdrom</command> from mounting and " +"unmounting the mount point. Configuration Item: <literal>APT::CDROM::" +"NoMount</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:121 +msgid "<option>--fast</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:122 +msgid "" +"Fast Copy; Assume the package files are valid and do not check every " +"package. This option should be used only if <command>apt-cdrom</command> has " +"been run on this disc before and did not detect any errors. Configuration " +"Item: <literal>APT::CDROM::Fast</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:131 +msgid "<option>--thorough</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:132 +msgid "" +"Thorough Package Scan; This option may be needed with some old Debian " +"1.1/1.2 discs that have Package files in strange places. It takes much " +"longer to scan the CD but will pick them all up." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:140 apt-get.8.xml:378 +msgid "<option>--just-print</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:141 apt-get.8.xml:380 +msgid "<option>--recon</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-cdrom.8.xml:142 apt-get.8.xml:381 +msgid "<option>--no-act</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cdrom.8.xml:143 +msgid "" +"No Changes; Do not change the &sources-list; file and do not write index " +"files. Everything is still checked however. Configuration Item: " +"<literal>APT::CDROM::NoAct</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cdrom.8.xml:156 +#, fuzzy +msgid "&apt-conf;, &apt-get;, &sources-list;" +msgstr "&apt-get; &apt-cache; &apt-conf; &sources-list;" + +#. type: Content of: <refentry><refsect1><para> +#: apt-cdrom.8.xml:161 +msgid "" +"<command>apt-cdrom</command> returns zero on normal operation, decimal 100 " +"on error." +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-config.8.xml:22 apt-config.8.xml:29 +msgid "apt-config" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-config.8.xml:30 +msgid "APT Configuration Query program" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-config.8.xml:36 +msgid "" +"<command>apt-config</command> <arg><option>-hv</option></arg> <arg><option>-" +"o=<replaceable>config string</replaceable></option></arg> <arg><option>-" +"c=<replaceable>file</replaceable></option></arg> <group choice=\"req\"> " +"<arg>shell</arg> <arg>dump</arg> </group>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-config.8.xml:48 +msgid "" +"<command>apt-config</command> is an internal program used by various " +"portions of the APT suite to provide consistent configurability. It accesses " +"the main configuration file <filename>/etc/apt/apt.conf</filename> in a " +"manner that is easy to use by scripted applications." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-config.8.xml:53 apt-ftparchive.1.xml:71 +msgid "" +"Unless the <option>-h</option>, or <option>--help</option> option is given " +"one of the commands below must be present." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-config.8.xml:58 +msgid "shell" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-config.8.xml:60 +msgid "" +"shell is used to access the configuration information from a shell script. " +"It is given pairs of arguments, the first being a shell variable and the " +"second the configuration value to query. As output it lists a series of " +"shell assignments commands for each present value. In a shell script it " +"should be used like:" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><informalexample><programlisting> +#: apt-config.8.xml:68 +#, no-wrap +msgid "" +"OPTS=\"-f\"\n" +"RES=`apt-config shell OPTS MyApp::options`\n" +"eval $RES\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-config.8.xml:73 +msgid "" +"This will set the shell environment variable $OPTS to the value of MyApp::" +"options with a default of <option>-f</option>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-config.8.xml:77 +msgid "" +"The configuration item may be postfixed with a /[fdbi]. f returns file " +"names, d returns directories, b returns true or false and i returns an " +"integer. Each of the returns is normalized and verified internally." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-config.8.xml:86 +msgid "Just show the contents of the configuration space." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-config.8.xml:104 apt-extracttemplates.1.xml:75 apt-ftparchive.1.xml:564 +#: apt-sortpkgs.1.xml:70 +#, fuzzy +msgid "&apt-conf;" +msgstr "" +"&apt-docinfo;\n" +"\n" +" " + +#. type: Content of: <refentry><refsect1><para> +#: apt-config.8.xml:109 +msgid "" +"<command>apt-config</command> returns zero on normal operation, decimal 100 " +"on error." +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-extracttemplates.1.xml:22 apt-extracttemplates.1.xml:29 +msgid "apt-extracttemplates" +msgstr "" + +#. type: Content of: <refentry><refmeta><manvolnum> +#: apt-extracttemplates.1.xml:23 apt-ftparchive.1.xml:23 apt-sortpkgs.1.xml:23 +msgid "1" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-extracttemplates.1.xml:30 +msgid "Utility to extract DebConf config and templates from Debian packages" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-extracttemplates.1.xml:36 +msgid "" +"<command>apt-extracttemplates</command> <arg><option>-hv</option></arg> " +"<arg><option>-t=<replaceable>temporary directory</replaceable></option></" +"arg> <arg choice=\"plain\" rep=\"repeat\"><replaceable>file</replaceable></" +"arg>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-extracttemplates.1.xml:44 +msgid "" +"<command>apt-extracttemplates</command> will take one or more Debian package " +"files as input and write out (to a temporary directory) all associated " +"config scripts and template files. For each passed in package that contains " +"config scripts and templates, one line of output will be generated in the " +"format:" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-extracttemplates.1.xml:49 +msgid "package version template-file config-script" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-extracttemplates.1.xml:50 +msgid "" +"template-file and config-script are written to the temporary directory " +"specified by the -t or --tempdir (<literal>APT::ExtractTemplates::TempDir</" +"literal>) directory, with filenames of the form <filename>package.template." +"XXXX</filename> and <filename>package.config.XXXX</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-extracttemplates.1.xml:60 apt-get.8.xml:488 +msgid "<option>-t</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-extracttemplates.1.xml:60 +msgid "<option>--tempdir</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-extracttemplates.1.xml:62 +msgid "" +"Temporary directory in which to write extracted debconf template files and " +"config scripts. Configuration Item: <literal>APT::ExtractTemplates::" +"TempDir</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-extracttemplates.1.xml:79 +msgid "" +"<command>apt-extracttemplates</command> returns zero on normal operation, " +"decimal 100 on error." +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-ftparchive.1.xml:22 apt-ftparchive.1.xml:29 +msgid "apt-ftparchive" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-ftparchive.1.xml:30 +msgid "Utility to generate index files" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-ftparchive.1.xml:36 +msgid "" +"<command>apt-ftparchive</command> <arg><option>-hvdsq</option></arg> " +"<arg><option>--md5</option></arg> <arg><option>--delink</option></arg> " +"<arg><option>--readonly</option></arg> <arg><option>--contents</option></" +"arg> <arg><option>-o <replaceable>config</replaceable>=<replaceable>string</" +"replaceable></option></arg> <arg><option>-c=<replaceable>file</replaceable></" +"option></arg> <group choice=\"req\"> <arg>packages<arg choice=\"plain\" rep=" +"\"repeat\"><replaceable>path</replaceable></arg><arg><replaceable>override</" +"replaceable><arg><replaceable>pathprefix</replaceable></arg></arg></arg> " +"<arg>sources<arg choice=\"plain\" rep=\"repeat\"><replaceable>path</" +"replaceable></arg><arg><replaceable>override</" +"replaceable><arg><replaceable>pathprefix</replaceable></arg></arg></arg> " +"<arg>contents <arg choice=\"plain\"><replaceable>path</replaceable></arg></" +"arg> <arg>release <arg choice=\"plain\"><replaceable>path</replaceable></" +"arg></arg> <arg>generate <arg choice=\"plain\"><replaceable>config-file</" +"replaceable></arg> <arg choice=\"plain\" rep=\"repeat" +"\"><replaceable>section</replaceable></arg></arg> <arg>clean <arg choice=" +"\"plain\"><replaceable>config-file</replaceable></arg></arg> </group>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:56 +msgid "" +"<command>apt-ftparchive</command> is the command line tool that generates " +"the index files that APT uses to access a distribution source. The index " +"files should be generated on the origin site based on the content of that " +"site." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:60 +msgid "" +"<command>apt-ftparchive</command> is a superset of the &dpkg-scanpackages; " +"program, incorporating its entire functionality via the <literal>packages</" +"literal> command. It also contains a contents file generator, " +"<literal>contents</literal>, and an elaborate means to 'script' the " +"generation process for a complete archive." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:66 +msgid "" +"Internally <command>apt-ftparchive</command> can make use of binary " +"databases to cache the contents of a .deb file and it does not rely on any " +"external programs aside from &gzip;. When doing a full generate it " +"automatically performs file-change checks and builds the desired compressed " +"output files." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:75 +msgid "packages" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:77 +msgid "" +"The packages command generates a package file from a directory tree. It " +"takes the given directory and recursively searches it for .deb files, " +"emitting a package record to stdout for each. This command is approximately " +"equivalent to &dpkg-scanpackages;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:82 apt-ftparchive.1.xml:106 +msgid "" +"The option <option>--db</option> can be used to specify a binary caching DB." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:85 +msgid "sources" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:87 +msgid "" +"The <literal>sources</literal> command generates a source index file from a " +"directory tree. It takes the given directory and recursively searches it " +"for .dsc files, emitting a source record to stdout for each. This command is " +"approximately equivalent to &dpkg-scansources;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:92 +msgid "" +"If an override file is specified then a source override file will be looked " +"for with an extension of .src. The --source-override option can be used to " +"change the source override file that will be used." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:97 +msgid "contents" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:99 +msgid "" +"The <literal>contents</literal> command generates a contents file from a " +"directory tree. It takes the given directory and recursively searches it " +"for .deb files, and reads the file list from each file. It then sorts and " +"writes to stdout the list of files matched to packages. Directories are not " +"written to the output. If multiple packages own the same file then each " +"package is separated by a comma in the output." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:109 +msgid "release" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:111 +msgid "" +"The <literal>release</literal> command generates a Release file from a " +"directory tree. It recursively searches the given directory for Packages, " +"Packages.gz, Packages.bz2, Sources, Sources.gz, Sources.bz2, Release and " +"md5sum.txt files. It then writes to stdout a Release file containing an MD5 " +"digest and SHA1 digest for each file." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:118 +msgid "" +"Values for the additional metadata fields in the Release file are taken from " +"the corresponding variables under <literal>APT::FTPArchive::Release</" +"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The " +"supported fields are: <literal>Origin</literal>, <literal>Label</literal>, " +"<literal>Suite</literal>, <literal>Version</literal>, <literal>Codename</" +"literal>, <literal>Date</literal>, <literal>Architectures</literal>, " +"<literal>Components</literal>, <literal>Description</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:128 +msgid "generate" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:130 +msgid "" +"The <literal>generate</literal> command is designed to be runnable from a " +"cron script and builds indexes according to the given config file. The " +"config language provides a flexible means of specifying which index files " +"are built from which directories, as well as providing a simple means of " +"maintaining the required settings." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:137 apt-get.8.xml:292 +msgid "clean" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:139 +msgid "" +"The <literal>clean</literal> command tidies the databases used by the given " +"configuration file by removing any records that are no longer necessary." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-ftparchive.1.xml:145 +msgid "The Generate Configuration" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:147 +msgid "" +"The <literal>generate</literal> command uses a configuration file to " +"describe the archives that are going to be generated. It follows the typical " +"ISC configuration format as seen in ISC tools like bind 8 and dhcpd. &apt-" +"conf; contains a description of the syntax. Note that the generate " +"configuration is parsed in sectional manner, but &apt-conf; is parsed in a " +"tree manner. This only effects how the scope tag is handled." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:155 +msgid "" +"The generate configuration has 4 separate sections, each described below." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt-ftparchive.1.xml:157 +#, fuzzy +msgid "Dir Section" +msgstr "Descrição" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:159 +msgid "" +"The <literal>Dir</literal> section defines the standard directories needed " +"to locate the files required during the generation process. These " +"directories are prepended certain relative paths defined in later sections " +"to produce a complete an absolute path." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:164 +msgid "ArchiveDir" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:166 +msgid "" +"Specifies the root of the FTP archive, in a standard Debian configuration " +"this is the directory that contains the <filename>ls-LR</filename> and dist " +"nodes." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:171 +msgid "OverrideDir" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:173 +msgid "Specifies the location of the override files." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:176 +msgid "CacheDir" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:178 +msgid "Specifies the location of the cache files" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:181 +msgid "FileListDir" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:183 +msgid "" +"Specifies the location of the file list files, if the <literal>FileList</" +"literal> setting is used below." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt-ftparchive.1.xml:189 +msgid "Default Section" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:191 +msgid "" +"The <literal>Default</literal> section specifies default values, and " +"settings that control the operation of the generator. Other sections may " +"override these defaults with a per-section setting." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:195 +msgid "Packages::Compress" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:197 +msgid "" +"Sets the default compression schemes to use for the Package index files. It " +"is a string that contains a space separated list of at least one of: '.' (no " +"compression), 'gzip' and 'bzip2'. The default for all compression schemes is " +"'. gzip'." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:203 +msgid "Packages::Extensions" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:205 +msgid "" +"Sets the default list of file extensions that are package files. This " +"defaults to '.deb'." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:209 +msgid "Sources::Compress" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:211 +msgid "" +"This is similar to <literal>Packages::Compress</literal> except that it " +"controls the compression for the Sources files." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:215 +msgid "Sources::Extensions" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:217 +msgid "" +"Sets the default list of file extensions that are source files. This " +"defaults to '.dsc'." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:221 +msgid "Contents::Compress" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:223 +msgid "" +"This is similar to <literal>Packages::Compress</literal> except that it " +"controls the compression for the Contents files." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:227 +msgid "DeLinkLimit" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:229 +msgid "" +"Specifies the number of kilobytes to delink (and replace with hard links) " +"per run. This is used in conjunction with the per-section <literal>External-" +"Links</literal> setting." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:234 +msgid "FileMode" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:236 +msgid "" +"Specifies the mode of all created index files. It defaults to 0644. All " +"index files are set to this mode with no regard to the umask." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt-ftparchive.1.xml:243 +msgid "TreeDefault Section" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:245 +msgid "" +"Sets defaults specific to <literal>Tree</literal> sections. All of these " +"variables are substitution variables and have the strings $(DIST), " +"$(SECTION) and $(ARCH) replaced with their respective values." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:250 +msgid "MaxContentsChange" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:252 +msgid "" +"Sets the number of kilobytes of contents files that are generated each day. " +"The contents files are round-robined so that over several days they will all " +"be rebuilt." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:257 +msgid "ContentsAge" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:259 +msgid "" +"Controls the number of days a contents file is allowed to be checked without " +"changing. If this limit is passed the mtime of the contents file is updated. " +"This case can occur if the package file is changed in such a way that does " +"not result in a new contents file [override edit for instance]. A hold off " +"is allowed in hopes that new .debs will be installed, requiring a new file " +"anyhow. The default is 10, the units are in days." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:268 +msgid "Directory" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:270 +msgid "" +"Sets the top of the .deb directory tree. Defaults to <filename>$(DIST)/" +"$(SECTION)/binary-$(ARCH)/</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:274 +msgid "SrcDirectory" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:276 +msgid "" +"Sets the top of the source package directory tree. Defaults to <filename>" +"$(DIST)/$(SECTION)/source/</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:280 apt-ftparchive.1.xml:406 +msgid "Packages" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:282 +msgid "" +"Sets the output Packages file. Defaults to <filename>$(DIST)/$(SECTION)/" +"binary-$(ARCH)/Packages</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:286 apt-ftparchive.1.xml:411 +msgid "Sources" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:288 +msgid "" +"Sets the output Packages file. Defaults to <filename>$(DIST)/$(SECTION)/" +"source/Sources</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:292 +msgid "InternalPrefix" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:294 +msgid "" +"Sets the path prefix that causes a symlink to be considered an internal link " +"instead of an external link. Defaults to <filename>$(DIST)/$(SECTION)/</" +"filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:299 apt-ftparchive.1.xml:417 +msgid "Contents" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:301 +msgid "" +"Sets the output Contents file. Defaults to <filename>$(DIST)/Contents-$(ARCH)" +"</filename>. If this setting causes multiple Packages files to map onto a " +"single Contents file (such as the default) then <command>apt-ftparchive</" +"command> will integrate those package files together automatically." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:308 +msgid "Contents::Header" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:310 +msgid "Sets header file to prepend to the contents output." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:313 apt-ftparchive.1.xml:442 +msgid "BinCacheDB" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:315 +msgid "" +"Sets the binary cache database to use for this section. Multiple sections " +"can share the same database." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:319 +msgid "FileList" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:321 +msgid "" +"Specifies that instead of walking the directory tree, <command>apt-" +"ftparchive</command> should read the list of files from the given file. " +"Relative files names are prefixed with the archive directory." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:326 +msgid "SourceFileList" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:328 +msgid "" +"Specifies that instead of walking the directory tree, <command>apt-" +"ftparchive</command> should read the list of files from the given file. " +"Relative files names are prefixed with the archive directory. This is used " +"when processing source indexes." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt-ftparchive.1.xml:336 +msgid "Tree Section" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:338 +msgid "" +"The <literal>Tree</literal> section defines a standard Debian file tree " +"which consists of a base directory, then multiple sections in that base " +"directory and finally multiple Architectures in each section. The exact " +"pathing used is defined by the <literal>Directory</literal> substitution " +"variable." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:343 +msgid "" +"The <literal>Tree</literal> section takes a scope tag which sets the " +"<literal>$(DIST)</literal> variable and defines the root of the tree (the " +"path is prefixed by <literal>ArchiveDir</literal>). Typically this is a " +"setting such as <filename>dists/woody</filename>." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:348 +msgid "" +"All of the settings defined in the <literal>TreeDefault</literal> section " +"can be use in a <literal>Tree</literal> section as well as three new " +"variables." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:351 +msgid "" +"When processing a <literal>Tree</literal> section <command>apt-ftparchive</" +"command> performs an operation similar to:" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><informalexample><programlisting> +#: apt-ftparchive.1.xml:354 +#, no-wrap +msgid "" +"for i in Sections do \n" +" for j in Architectures do\n" +" Generate for DIST=scope SECTION=i ARCH=j\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:360 +#, fuzzy +msgid "Sections" +msgstr "Descrição" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:362 +msgid "" +"This is a space separated list of sections which appear under the " +"distribution, typically this is something like <literal>main contrib non-" +"free</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:367 +msgid "Architectures" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:369 +msgid "" +"This is a space separated list of all the architectures that appear under " +"search section. The special architecture 'source' is used to indicate that " +"this tree has a source archive." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:374 apt-ftparchive.1.xml:422 +msgid "BinOverride" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:376 +msgid "" +"Sets the binary override file. The override file contains section, priority " +"and maintainer address information." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:380 apt-ftparchive.1.xml:427 +msgid "SrcOverride" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:382 +msgid "" +"Sets the source override file. The override file contains section " +"information." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:386 apt-ftparchive.1.xml:432 +msgid "ExtraOverride" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:388 apt-ftparchive.1.xml:434 +msgid "Sets the binary extra override file." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:391 apt-ftparchive.1.xml:437 +msgid "SrcExtraOverride" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:393 apt-ftparchive.1.xml:439 +msgid "Sets the source extra override file." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt-ftparchive.1.xml:398 +msgid "BinDirectory Section" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt-ftparchive.1.xml:400 +msgid "" +"The <literal>bindirectory</literal> section defines a binary directory tree " +"with no special structure. The scope tag specifies the location of the " +"binary directory and the settings are similar to the <literal>Tree</literal> " +"section with no substitution variables or <literal>Section</" +"literal><literal>Architecture</literal> settings." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:408 +msgid "Sets the Packages file output." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:413 +msgid "" +"Sets the Sources file output. At least one of <literal>Packages</literal> or " +"<literal>Sources</literal> is required." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:419 +msgid "Sets the Contents file output. (optional)" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:424 +msgid "Sets the binary override file." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:429 +msgid "Sets the source override file." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:444 +msgid "Sets the cache DB." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:447 +msgid "PathPrefix" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:449 +msgid "Appends a path to all the output paths." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:452 +msgid "FileList, SourceFileList" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:454 +msgid "Specifies the file list file." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-ftparchive.1.xml:461 +msgid "The Binary Override File" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:462 +msgid "" +"The binary override file is fully compatible with &dpkg-scanpackages;. It " +"contains 4 fields separated by spaces. The first field is the package name, " +"the second is the priority to force that package to, the third is the the " +"section to force that package to and the final field is the maintainer " +"permutation field." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><literallayout> +#: apt-ftparchive.1.xml:468 +#, no-wrap +msgid "old [// oldn]* => new" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><literallayout> +#: apt-ftparchive.1.xml:470 +#, no-wrap +msgid "new" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:467 +msgid "" +"The general form of the maintainer field is: <placeholder type=" +"\"literallayout\" id=\"0\"/> or simply, <placeholder type=\"literallayout\" " +"id=\"1\"/> The first form allows a double-slash separated list of old email " +"addresses to be specified. If any of those are found then new is substituted " +"for the maintainer field. The second form unconditionally substitutes the " +"maintainer field." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-ftparchive.1.xml:478 +msgid "The Source Override File" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:480 +msgid "" +"The source override file is fully compatible with &dpkg-scansources;. It " +"contains 2 fields separated by spaces. The first fields is the source " +"package name, the second is the section to assign it." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-ftparchive.1.xml:485 +msgid "The Extra Override File" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:487 +msgid "" +"The extra override file allows any arbitrary tag to be added or replaced in " +"the output. It has 3 columns, the first is the package, the second is the " +"tag and the remainder of the line is the new value." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:496 +msgid "<option>--md5</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:498 +msgid "" +"Generate MD5 sums. This defaults to on, when turned off the generated index " +"files will not have MD5Sum fields where possible. Configuration Item: " +"<literal>APT::FTPArchive::MD5</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:503 +msgid "<option>--db</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:505 +msgid "" +"Use a binary caching DB. This has no effect on the generate command. " +"Configuration Item: <literal>APT::FTPArchive::DB</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:511 +msgid "" +"Quiet; produces output suitable for logging, omitting progress indicators. " +"More q's will produce more quiet up to a maximum of 2. You can also use " +"<option>-q=#</option> to set the quiet level, overriding the configuration " +"file. Configuration Item: <literal>quiet</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:517 +msgid "<option>--delink</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:519 +msgid "" +"Perform Delinking. If the <literal>External-Links</literal> setting is used " +"then this option actually enables delinking of the files. It defaults to on " +"and can be turned off with <option>--no-delink</option>. Configuration " +"Item: <literal>APT::FTPArchive::DeLinkAct</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:525 +msgid "<option>--contents</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:527 +msgid "" +"Perform contents generation. When this option is set and package indexes are " +"being generated with a cache DB then the file listing will also be extracted " +"and stored in the DB for later use. When using the generate command this " +"option also allows the creation of any Contents files. The default is on. " +"Configuration Item: <literal>APT::FTPArchive::Contents</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:535 +msgid "<option>--source-override</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:537 +msgid "" +"Select the source override file to use with the <literal>sources</literal> " +"command. Configuration Item: <literal>APT::FTPArchive::SourceOverride</" +"literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:541 +msgid "<option>--readonly</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:543 +msgid "" +"Make the caching databases read only. Configuration Item: <literal>APT::" +"FTPArchive::ReadOnlyDB</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-ftparchive.1.xml:552 apt.conf.5.xml:982 apt_preferences.5.xml:462 +#: sources.list.5.xml:193 +#, fuzzy +msgid "Examples" +msgstr "Exemplos" + +#. type: Content of: <refentry><refsect1><para><programlisting> +#: apt-ftparchive.1.xml:558 +#, no-wrap +msgid "<command>apt-ftparchive</command> packages <replaceable>directory</replaceable> | <command>gzip</command> > <filename>Packages.gz</filename>\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:554 +msgid "" +"To create a compressed Packages file for a directory containing binary " +"packages (.deb): <placeholder type=\"programlisting\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-ftparchive.1.xml:568 +msgid "" +"<command>apt-ftparchive</command> returns zero on normal operation, decimal " +"100 on error." +msgstr "" + +#. The last update date +#. type: Content of: <refentry><refentryinfo> +#: apt-get.8.xml:13 +msgid "" +"&apt-author.jgunthorpe; &apt-author.team; &apt-email; &apt-product; <date>08 " +"November 2008</date>" +msgstr "" + +#. type: <heading></heading> +#: apt-get.8.xml:22 apt-get.8.xml:29 guide.sgml:96 +msgid "apt-get" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-get.8.xml:30 +msgid "APT package handling utility -- command-line interface" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-get.8.xml:36 +msgid "" +"<command>apt-get</command> <arg><option>-sqdyfmubV</option></arg> <arg> " +"<option>-o= <replaceable>config_string</replaceable> </option> </arg> <arg> " +"<option>-c= <replaceable>config_file</replaceable> </option> </arg> <arg> " +"<option>-t=</option> <group choice='req'> <arg choice='plain'> " +"<replaceable>target_release_name</replaceable> </arg> <arg choice='plain'> " +"<replaceable>target_release_number_expression</replaceable> </arg> <arg " +"choice='plain'> <replaceable>target_release_codename</replaceable> </arg> </" +"group> </arg> <group choice=\"req\"> <arg choice='plain'>update</arg> <arg " +"choice='plain'>upgrade</arg> <arg choice='plain'>dselect-upgrade</arg> <arg " +"choice='plain'>dist-upgrade</arg> <arg choice='plain'>install <arg choice=" +"\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable> <arg> <group " +"choice='req'> <arg choice='plain'> =<replaceable>pkg_version_number</" +"replaceable> </arg> <arg choice='plain'> /<replaceable>target_release_name</" +"replaceable> </arg> <arg choice='plain'> /" +"<replaceable>target_release_codename</replaceable> </arg> </group> </arg> </" +"arg> </arg> <arg choice='plain'>remove <arg choice=\"plain\" rep=\"repeat" +"\"><replaceable>pkg</replaceable></arg></arg> <arg choice='plain'>purge <arg " +"choice=\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable></arg></arg> " +"<arg choice='plain'>source <arg choice=\"plain\" rep=\"repeat" +"\"><replaceable>pkg</replaceable> <arg> <group choice='req'> <arg " +"choice='plain'> =<replaceable>pkg_version_number</replaceable> </arg> <arg " +"choice='plain'> /<replaceable>target_release_name</replaceable> </arg> <arg " +"choice='plain'> /<replaceable>target_release_codename</replaceable> </arg> </" +"group> </arg> </arg> </arg> <arg choice='plain'>build-dep <arg choice=\"plain" +"\" rep=\"repeat\"><replaceable>pkg</replaceable></arg></arg> <arg " +"choice='plain'>check</arg> <arg choice='plain'>clean</arg> <arg " +"choice='plain'>autoclean</arg> <arg choice='plain'>autoremove</arg> <arg " +"choice='plain'> <group choice='req'> <arg choice='plain'>-v</arg> <arg " +"choice='plain'>--version</arg> </group> </arg> <arg choice='plain'> <group " +"choice='req'> <arg choice='plain'>-h</arg> <arg choice='plain'>--help</arg> " +"</group> </arg> </group>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-get.8.xml:126 +msgid "" +"<command>apt-get</command> is the command-line tool for handling packages, " +"and may be considered the user's \"back-end\" to other tools using the APT " +"library. Several \"front-end\" interfaces exist, such as &dselect;, " +"&aptitude;, &synaptic;, &gnome-apt; and &wajig;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:135 apt-key.8.xml:123 +msgid "update" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:136 +msgid "" +"<literal>update</literal> is used to resynchronize the package index files " +"from their sources. The indexes of available packages are fetched from the " +"location(s) specified in <filename>/etc/apt/sources.list</filename>. For " +"example, when using a Debian archive, this command retrieves and scans the " +"<filename>Packages.gz</filename> files, so that information about new and " +"updated packages is available. An <literal>update</literal> should always be " +"performed before an <literal>upgrade</literal> or <literal>dist-upgrade</" +"literal>. Please be aware that the overall progress meter will be incorrect " +"as the size of the package files cannot be known in advance." +msgstr "" + +#. type: <tag></tag> +#: apt-get.8.xml:147 guide.sgml:121 +msgid "upgrade" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:148 +msgid "" +"<literal>upgrade</literal> is used to install the newest versions of all " +"packages currently installed on the system from the sources enumerated in " +"<filename>/etc/apt/sources.list</filename>. Packages currently installed " +"with new versions available are retrieved and upgraded; under no " +"circumstances are currently installed packages removed, or packages not " +"already installed retrieved and installed. New versions of currently " +"installed packages that cannot be upgraded without changing the install " +"status of another package will be left at their current version. An " +"<literal>update</literal> must be performed first so that <command>apt-get</" +"command> knows that new versions of packages are available." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:160 +msgid "dselect-upgrade" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:161 +msgid "" +"<literal>dselect-upgrade</literal> is used in conjunction with the " +"traditional Debian packaging front-end, &dselect;. <literal>dselect-upgrade</" +"literal> follows the changes made by &dselect; to the <literal>Status</" +"literal> field of available packages, and performs the actions necessary to " +"realize that state (for instance, the removal of old and the installation of " +"new packages)." +msgstr "" + +#. type: <tag></tag> +#: apt-get.8.xml:170 guide.sgml:140 +msgid "dist-upgrade" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:171 +msgid "" +"<literal>dist-upgrade</literal> in addition to performing the function of " +"<literal>upgrade</literal>, also intelligently handles changing dependencies " +"with new versions of packages; <command>apt-get</command> has a \"smart\" " +"conflict resolution system, and it will attempt to upgrade the most " +"important packages at the expense of less important ones if necessary. So, " +"<literal>dist-upgrade</literal> command may remove some packages. The " +"<filename>/etc/apt/sources.list</filename> file contains a list of locations " +"from which to retrieve desired package files. See also &apt-preferences; " +"for a mechanism for overriding the general settings for individual packages." +msgstr "" + +#. type: <tag></tag> +#: apt-get.8.xml:183 guide.sgml:131 +msgid "install" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:185 +msgid "" +"<literal>install</literal> is followed by one or more packages desired for " +"installation or upgrading. Each package is a package name, not a fully " +"qualified filename (for instance, in a Debian GNU/Linux system, libc6 would " +"be the argument provided, not <literal>libc6_1.9.6-2.deb</literal>). All " +"packages required by the package(s) specified for installation will also be " +"retrieved and installed. The <filename>/etc/apt/sources.list</filename> " +"file is used to locate the desired packages. If a hyphen is appended to the " +"package name (with no intervening space), the identified package will be " +"removed if it is installed. Similarly a plus sign can be used to designate " +"a package to install. These latter features may be used to override " +"decisions made by apt-get's conflict resolution system." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:203 +msgid "" +"A specific version of a package can be selected for installation by " +"following the package name with an equals and the version of the package to " +"select. This will cause that version to be located and selected for install. " +"Alternatively a specific distribution can be selected by following the " +"package name with a slash and the version of the distribution or the Archive " +"name (stable, testing, unstable)." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:210 +msgid "" +"Both of the version selection mechanisms can downgrade packages and must be " +"used with care." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:213 +msgid "" +"This is also the target to use if you want to upgrade one or more already-" +"installed packages without upgrading every package you have on your system. " +"Unlike the \"upgrade\" target, which installs the newest version of all " +"currently installed packages, \"install\" will install the newest version of " +"only the package(s) specified. Simply provide the name of the package(s) " +"you wish to upgrade, and if a newer version is available, it (and its " +"dependencies, as described above) will be downloaded and installed." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:224 +msgid "" +"Finally, the &apt-preferences; mechanism allows you to create an alternative " +"installation policy for individual packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:228 +msgid "" +"If no package matches the given expression and the expression contains one " +"of '.', '?' or '*' then it is assumed to be a POSIX regular expression, and " +"it is applied to all package names in the database. Any matches are then " +"installed (or removed). Note that matching is done by substring so 'lo.*' " +"matches 'how-lo' and 'lowest'. If this is undesired, anchor the regular " +"expression with a '^' or '$' character, or create a more specific regular " +"expression." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:237 +msgid "remove" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:238 +msgid "" +"<literal>remove</literal> is identical to <literal>install</literal> except " +"that packages are removed instead of installed. Note the removing a package " +"leaves its configuration files in system. If a plus sign is appended to the " +"package name (with no intervening space), the identified package will be " +"installed instead of removed." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:245 +msgid "purge" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:246 +msgid "" +"<literal>purge</literal> is identical to <literal>remove</literal> except " +"that packages are removed and purged (any configuration files are deleted " +"too)." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:250 +msgid "source" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:251 +msgid "" +"<literal>source</literal> causes <command>apt-get</command> to fetch source " +"packages. APT will examine the available packages to decide which source " +"package to fetch. It will then find and download into the current directory " +"the newest available version of that source package while respect the " +"default release, set with the option <literal>APT::Default-Release</" +"literal>, the <option>-t</option> option or per package with the " +"<literal>pkg/release</literal> syntax, if possible." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:259 +msgid "" +"Source packages are tracked separately from binary packages via <literal>deb-" +"src</literal> type lines in the &sources-list; file. This means that you " +"will need to add such a line for each repository you want to get sources " +"from. If you don't do this you will properly get another (newer, older or " +"none) source version than the one you have installed or could install." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:266 +msgid "" +"If the <option>--compile</option> option is specified then the package will " +"be compiled to a binary .deb using <command>dpkg-buildpackage</command>, if " +"<option>--download-only</option> is specified then the source package will " +"not be unpacked." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:271 +msgid "" +"A specific source version can be retrieved by postfixing the source name " +"with an equals and then the version to fetch, similar to the mechanism used " +"for the package files. This enables exact matching of the source package " +"name and version, implicitly enabling the <literal>APT::Get::Only-Source</" +"literal> option." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:277 +msgid "" +"Note that source packages are not tracked like binary packages, they exist " +"only in the current directory and are similar to downloading source tar " +"balls." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:282 +msgid "build-dep" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:283 +msgid "" +"<literal>build-dep</literal> causes apt-get to install/remove packages in an " +"attempt to satisfy the build dependencies for a source package." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:287 +msgid "check" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:288 +msgid "" +"<literal>check</literal> is a diagnostic tool; it updates the package cache " +"and checks for broken dependencies." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:293 +msgid "" +"<literal>clean</literal> clears out the local repository of retrieved " +"package files. It removes everything but the lock file from " +"<filename>&cachedir;/archives/</filename> and <filename>&cachedir;/archives/" +"partial/</filename>. When APT is used as a &dselect; method, <literal>clean</" +"literal> is run automatically. Those who do not use dselect will likely " +"want to run <literal>apt-get clean</literal> from time to time to free up " +"disk space." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:302 +msgid "autoclean" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:303 +msgid "" +"Like <literal>clean</literal>, <literal>autoclean</literal> clears out the " +"local repository of retrieved package files. The difference is that it only " +"removes package files that can no longer be downloaded, and are largely " +"useless. This allows a cache to be maintained over a long period without it " +"growing out of control. The configuration option <literal>APT::Clean-" +"Installed</literal> will prevent installed packages from being erased if it " +"is set to off." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:312 +msgid "autoremove" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:313 +msgid "" +"<literal>autoremove</literal> is used to remove packages that were " +"automatically installed to satisfy dependencies for some package and that " +"are no more needed." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:323 apt-get.8.xml:429 +msgid "<option>--no-install-recommends</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:324 +msgid "" +"Do not consider recommended packages as a dependency for installing. " +"Configuration Item: <literal>APT::Install-Recommends</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:328 +msgid "<option>--download-only</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:329 +msgid "" +"Download only; package files are only retrieved, not unpacked or installed. " +"Configuration Item: <literal>APT::Get::Download-Only</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:333 +msgid "<option>--fix-broken</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:334 +msgid "" +"Fix; attempt to correct a system with broken dependencies in place. This " +"option, when used with install/remove, can omit any packages to permit APT " +"to deduce a likely solution. Any Package that are specified must completely " +"correct the problem. The option is sometimes necessary when running APT for " +"the first time; APT itself does not allow broken package dependencies to " +"exist on a system. It is possible that a system's dependency structure can " +"be so corrupt as to require manual intervention (which usually means using " +"&dselect; or <command>dpkg --remove</command> to eliminate some of the " +"offending packages). Use of this option together with <option>-m</option> " +"may produce an error in some situations. Configuration Item: <literal>APT::" +"Get::Fix-Broken</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:347 +msgid "<option>--ignore-missing</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:348 +msgid "<option>--fix-missing</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:349 +msgid "" +"Ignore missing packages; If packages cannot be retrieved or fail the " +"integrity check after retrieval (corrupted package files), hold back those " +"packages and handle the result. Use of this option together with <option>-f</" +"option> may produce an error in some situations. If a package is selected " +"for installation (particularly if it is mentioned on the command line) and " +"it could not be downloaded then it will be silently held back. " +"Configuration Item: <literal>APT::Get::Fix-Missing</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:359 +msgid "<option>--no-download</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:360 +msgid "" +"Disables downloading of packages. This is best used with <option>--ignore-" +"missing</option> to force APT to use only the .debs it has already " +"downloaded. Configuration Item: <literal>APT::Get::Download</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:367 +msgid "" +"Quiet; produces output suitable for logging, omitting progress indicators. " +"More q's will produce more quiet up to a maximum of 2. You can also use " +"<option>-q=#</option> to set the quiet level, overriding the configuration " +"file. Note that quiet level 2 implies <option>-y</option>, you should never " +"use -qq without a no-action modifier such as -d, --print-uris or -s as APT " +"may decided to do something you did not expect. Configuration Item: " +"<literal>quiet</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:377 +msgid "<option>--simulate</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:379 +msgid "<option>--dry-run</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:382 +msgid "" +"No action; perform a simulation of events that would occur but do not " +"actually change the system. Configuration Item: <literal>APT::Get::" +"Simulate</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:386 +msgid "" +"Simulation run as user will deactivate locking (<literal>Debug::NoLocking</" +"literal>) automatic. Also a notice will be displayed indicating that this " +"is only a simulation, if the option <literal>APT::Get::Show-User-Simulation-" +"Note</literal> is set (Default: true). Neither NoLocking nor the notice " +"will be triggered if run as root (root should know what he is doing without " +"further warnings by <literal>apt-get</literal>)." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:392 +msgid "" +"Simulate prints out a series of lines each one representing a dpkg " +"operation, Configure (Conf), Remove (Remv), Unpack (Inst). Square brackets " +"indicate broken packages and empty set of square brackets meaning breaks " +"that are of no consequence (rare)." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:399 +msgid "<option>-y</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:399 +msgid "<option>--yes</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:400 +msgid "<option>--assume-yes</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:401 +msgid "" +"Automatic yes to prompts; assume \"yes\" as answer to all prompts and run " +"non-interactively. If an undesirable situation, such as changing a held " +"package, trying to install a unauthenticated package or removing an " +"essential package occurs then <literal>apt-get</literal> will abort. " +"Configuration Item: <literal>APT::Get::Assume-Yes</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:408 +msgid "<option>-u</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:408 +msgid "<option>--show-upgraded</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:409 +msgid "" +"Show upgraded packages; Print out a list of all packages that are to be " +"upgraded. Configuration Item: <literal>APT::Get::Show-Upgraded</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:414 +msgid "<option>-V</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:414 +msgid "<option>--verbose-versions</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:415 +msgid "" +"Show full versions for upgraded and installed packages. Configuration Item: " +"<literal>APT::Get::Show-Versions</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:419 +msgid "<option>-b</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:419 +msgid "<option>--compile</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:420 +msgid "<option>--build</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:421 +msgid "" +"Compile source packages after downloading them. Configuration Item: " +"<literal>APT::Get::Compile</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:425 +msgid "<option>--install-recommends</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:426 +msgid "Also install recommended packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:430 +msgid "Do not install recommended packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:433 +msgid "<option>--ignore-hold</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:434 +msgid "" +"Ignore package Holds; This causes <command>apt-get</command> to ignore a " +"hold placed on a package. This may be useful in conjunction with " +"<literal>dist-upgrade</literal> to override a large number of undesired " +"holds. Configuration Item: <literal>APT::Ignore-Hold</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:440 +msgid "<option>--no-upgrade</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:441 +msgid "" +"Do not upgrade packages; When used in conjunction with <literal>install</" +"literal>, <literal>no-upgrade</literal> will prevent packages on the command " +"line from being upgraded if they are already installed. Configuration Item: " +"<literal>APT::Get::Upgrade</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:447 +msgid "<option>--force-yes</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:448 +msgid "" +"Force yes; This is a dangerous option that will cause apt to continue " +"without prompting if it is doing something potentially harmful. It should " +"not be used except in very special situations. Using <literal>force-yes</" +"literal> can potentially destroy your system! Configuration Item: " +"<literal>APT::Get::force-yes</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:455 +msgid "<option>--print-uris</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:456 +msgid "" +"Instead of fetching the files to install their URIs are printed. Each URI " +"will have the path, the destination file name, the size and the expected md5 " +"hash. Note that the file name to write to will not always match the file " +"name on the remote site! This also works with the <literal>source</literal> " +"and <literal>update</literal> commands. When used with the <literal>update</" +"literal> command the MD5 and size are not included, and it is up to the user " +"to decompress any compressed files. Configuration Item: <literal>APT::Get::" +"Print-URIs</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:466 +msgid "<option>--purge</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:467 +msgid "" +"Use purge instead of remove for anything that would be removed. An asterisk " +"(\"*\") will be displayed next to packages which are scheduled to be purged. " +"<option>remove --purge</option> is equivalent for <option>purge</option> " +"command. Configuration Item: <literal>APT::Get::Purge</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:474 +msgid "<option>--reinstall</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:475 +msgid "" +"Re-Install packages that are already installed and at the newest version. " +"Configuration Item: <literal>APT::Get::ReInstall</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:479 +msgid "<option>--list-cleanup</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:480 +msgid "" +"This option defaults to on, use <literal>--no-list-cleanup</literal> to turn " +"it off. When on <command>apt-get</command> will automatically manage the " +"contents of <filename>&statedir;/lists</filename> to ensure that obsolete " +"files are erased. The only reason to turn it off is if you frequently " +"change your source list. Configuration Item: <literal>APT::Get::List-" +"Cleanup</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:489 +msgid "<option>--target-release</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:490 +msgid "<option>--default-release</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:491 +msgid "" +"This option controls the default input to the policy engine, it creates a " +"default pin at priority 990 using the specified release string. This " +"overrides the general settings in <filename>/etc/apt/preferences</" +"filename>. Specifically pinned packages are not affected by the value of " +"this option. In short, this option lets you have simple control over which " +"distribution packages will be retrieved from. Some common examples might be " +"<option>-t '2.1*'</option>, <option>-t unstable</option> or <option>-t sid</" +"option>. Configuration Item: <literal>APT::Default-Release</literal>; see " +"also the &apt-preferences; manual page." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:504 +msgid "<option>--trivial-only</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:506 +msgid "" +"Only perform operations that are 'trivial'. Logically this can be considered " +"related to <option>--assume-yes</option>, where <option>--assume-yes</" +"option> will answer yes to any prompt, <option>--trivial-only</option> will " +"answer no. Configuration Item: <literal>APT::Get::Trivial-Only</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:512 +msgid "<option>--no-remove</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:513 +msgid "" +"If any packages are to be removed apt-get immediately aborts without " +"prompting. Configuration Item: <literal>APT::Get::Remove</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:518 +msgid "<option>--auto-remove</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:519 +msgid "" +"If the command is either <literal>install</literal> or <literal>remove</" +"literal>, then this option acts like running <literal>autoremove</literal> " +"command, removing the unused dependency packages. Configuration Item: " +"<literal>APT::Get::AutomaticRemove</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:525 +msgid "<option>--only-source</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:526 +msgid "" +"Only has meaning for the <literal>source</literal> and <literal>build-dep</" +"literal> commands. Indicates that the given source names are not to be " +"mapped through the binary table. This means that if this option is " +"specified, these commands will only accept source package names as " +"arguments, rather than accepting binary package names and looking up the " +"corresponding source package. Configuration Item: <literal>APT::Get::Only-" +"Source</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:536 +msgid "<option>--diff-only</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:536 +msgid "<option>--dsc-only</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:536 +msgid "<option>--tar-only</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:537 +msgid "" +"Download only the diff, dsc, or tar file of a source archive. Configuration " +"Item: <literal>APT::Get::Diff-Only</literal>, <literal>APT::Get::Dsc-Only</" +"literal>, and <literal>APT::Get::Tar-Only</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:542 +msgid "<option>--arch-only</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:543 +msgid "" +"Only process architecture-dependent build-dependencies. Configuration Item: " +"<literal>APT::Get::Arch-Only</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-get.8.xml:547 +msgid "<option>--allow-unauthenticated</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml:548 +msgid "" +"Ignore if packages can't be authenticated and don't prompt about it. This " +"is useful for tools like pbuilder. Configuration Item: <literal>APT::Get::" +"AllowUnauthenticated</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist> +#: apt-get.8.xml:561 +msgid "" +"&file-sourceslist; &file-aptconf; &file-preferences; &file-cachearchives; " +"&file-statelists;" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-get.8.xml:570 +msgid "" +"&apt-cache;, &apt-cdrom;, &dpkg;, &dselect;, &sources-list;, &apt-conf;, " +"&apt-config;, &apt-secure;, The APT User's guide in &guidesdir;, &apt-" +"preferences;, the APT Howto." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-get.8.xml:576 +msgid "" +"<command>apt-get</command> returns zero on normal operation, decimal 100 on " +"error." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-get.8.xml:579 +msgid "ORIGINAL AUTHORS" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-get.8.xml:580 +msgid "&apt-author.jgunthorpe;" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-get.8.xml:583 +msgid "CURRENT AUTHORS" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-get.8.xml:585 +msgid "&apt-author.team;" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-key.8.xml:14 apt-key.8.xml:21 +msgid "apt-key" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-key.8.xml:22 +msgid "APT key management utility" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-key.8.xml:28 +msgid "" +"<command>apt-key</command> <arg><replaceable>command</replaceable>/</arg> " +"<arg rep=\"repeat\"><option><replaceable>arguments</replaceable></option></" +"arg>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-key.8.xml:36 +msgid "" +"<command>apt-key</command> is used to manage the list of keys used by apt to " +"authenticate packages. Packages which have been authenticated using these " +"keys will be considered trusted." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-key.8.xml:42 +msgid "Commands" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:44 +msgid "add <replaceable>filename</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:48 +msgid "" +"Add a new key to the list of trusted keys. The key is read from " +"<replaceable>filename</replaceable>, or standard input if " +"<replaceable>filename</replaceable> is <literal>-</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:56 +msgid "del <replaceable>keyid</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:60 +msgid "Remove a key from the list of trusted keys." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:67 +msgid "export <replaceable>keyid</replaceable>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:71 +msgid "Output the key <replaceable>keyid</replaceable> to standard output." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:78 +msgid "exportall" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:82 +msgid "Output all trusted keys to standard output." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:89 +msgid "list" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:93 +msgid "List trusted keys." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:100 +msgid "finger" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:104 +msgid "List fingerprints of trusted keys." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:111 +msgid "adv" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:115 +msgid "" +"Pass advanced options to gpg. With adv --recv-key you can download the " +"public key." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:127 +msgid "" +"Update the local keyring with the keyring of Debian archive keys and removes " +"from the keyring the archive keys which are no longer valid." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:140 +#, fuzzy +msgid "<filename>/etc/apt/trusted.gpg</filename>" +msgstr "<filename>/etc/apt.conf</>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:141 +msgid "Keyring of local trusted keys, new keys will be added here." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:144 +#, fuzzy +msgid "<filename>/etc/apt/trustdb.gpg</filename>" +msgstr "<filename>/etc/apt.conf</>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:145 +msgid "Local trust database of archive keys." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:148 +msgid "<filename>/usr/share/keyrings/debian-archive-keyring.gpg</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:149 +msgid "Keyring of Debian archive trusted keys." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml:152 +msgid "" +"<filename>/usr/share/keyrings/debian-archive-removed-keys.gpg</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml:153 +msgid "Keyring of Debian archive removed trusted keys." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-key.8.xml:164 +#, fuzzy +msgid "&apt-get;, &apt-secure;" +msgstr "&apt-get; &apt-cache; &apt-conf; &sources-list;" + +#. The last update date +#. type: Content of: <refentry><refentryinfo> +#: apt-mark.8.xml:13 +msgid "" +"&apt-author.moconnor; &apt-author.team; &apt-email; &apt-product; <date>9 " +"August 2009</date>" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-mark.8.xml:22 apt-mark.8.xml:29 +msgid "apt-mark" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-mark.8.xml:30 +msgid "mark/unmark a package as being automatically-installed" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-mark.8.xml:36 +msgid "" +" <command>apt-mark</command> <arg><option>-hv</option></arg> <arg><option>-" +"f=<replaceable>FILENAME</replaceable></option></arg> <group choice=\"plain" +"\"> <arg choice=\"plain\"> <group choice=\"req\"> <arg choice=\"plain" +"\">markauto</arg> <arg choice=\"plain\">unmarkauto</arg> </group> <arg " +"choice=\"plain\" rep=\"repeat\"><replaceable>package</replaceable></arg> </" +"arg> <arg choice=\"plain\">showauto</arg> </group>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-mark.8.xml:53 +msgid "" +"<command>apt-mark</command> will change whether a package has been marked as " +"being automatically installed." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-mark.8.xml:57 +msgid "" +"When you request that a package is installed, and as a result other packages " +"are installed to satisfy its dependencies, the dependencies are marked as " +"being automatically installed. Once these automatically installed packages " +"are no longer depended on by any manually installed packages, they will be " +"removed by e.g. <command>apt-get</command> or <command>aptitude</command>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:65 +msgid "markauto" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-mark.8.xml:66 +msgid "" +"<literal>markauto</literal> is used to mark a package as being automatically " +"installed, which will cause the package to be removed when no more manually " +"installed packages depend on this package." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:73 +msgid "unmarkauto" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-mark.8.xml:74 +msgid "" +"<literal>unmarkauto</literal> is used to mark a package as being manually " +"installed, which will prevent the package from being automatically removed " +"if no other packages depend on it." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:81 +msgid "showauto" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-mark.8.xml:82 +msgid "" +"<literal>showauto</literal> is used to print a list of automatically " +"installed packages with each package on a new line." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:93 +msgid "" +"<option>-f=<filename><replaceable>FILENAME</replaceable></filename></option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:94 +msgid "" +"<option>--file=<filename><replaceable>FILENAME</replaceable></filename></" +"option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-mark.8.xml:97 +msgid "" +"Read/Write package stats from <filename><replaceable>FILENAME</replaceable></" +"filename> instead of the default location, which is " +"<filename>extended_status</filename> in the directory defined by the " +"Configuration Item: <literal>Dir::State</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:103 +msgid "<option>-h</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:104 +msgid "<option>--help</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-mark.8.xml:105 +msgid "Show a short usage summary." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:111 +msgid "<option>-v</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:112 +msgid "<option>--version</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-mark.8.xml:113 +msgid "Show the program version." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-mark.8.xml:124 +msgid "<filename>/var/lib/apt/extended_states</filename>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-mark.8.xml:125 +msgid "" +"Status list of auto-installed packages. Configuration Item: <literal>Dir::" +"State</literal> sets the path to the <filename>extended_states</filename> " +"file." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-mark.8.xml:134 +#, fuzzy +msgid "&apt-get;,&aptitude;,&apt-conf;" +msgstr "&apt-get; &apt-cache; &apt-conf; &sources-list;" + +#. type: Content of: <refentry><refsect1><para> +#: apt-mark.8.xml:138 +msgid "" +"<command>apt-mark</command> returns zero on normal operation, non-zero on " +"error." +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-secure.8.xml:14 apt-secure.8.xml:36 +msgid "apt-secure" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-secure.8.xml:37 +msgid "Archive authentication support for APT" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:42 +msgid "" +"Starting with version 0.6, <command>apt</command> contains code that does " +"signature checking of the Release file for all archives. This ensures that " +"packages in the archive can't be modified by people who have no access to " +"the Release file signing key." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:50 +msgid "" +"If a package comes from a archive without a signature or with a signature " +"that apt does not have a key for that package is considered untrusted and " +"installing it will result in a big warning. <command>apt-get</command> will " +"currently only warn for unsigned archives, future releases might force all " +"sources to be verified before downloading packages from them." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:59 +msgid "" +"The package frontends &apt-get;, &aptitude; and &synaptic; support this new " +"authentication feature." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-secure.8.xml:64 +msgid "Trusted archives" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:67 +msgid "" +"The chain of trust from an apt archive to the end user is made up of " +"different steps. <command>apt-secure</command> is the last step in this " +"chain, trusting an archive does not mean that the packages that you trust it " +"do not contain malicious code but means that you trust the archive " +"maintainer. It's the archive maintainer responsibility to ensure that the " +"archive integrity is correct." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:75 +msgid "" +"apt-secure does not review signatures at a package level. If you require " +"tools to do this you should look at <command>debsig-verify</command> and " +"<command>debsign</command> (provided in the debsig-verify and devscripts " +"packages respectively)." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:82 +msgid "" +"The chain of trust in Debian starts when a maintainer uploads a new package " +"or a new version of a package to the Debian archive. This upload in order to " +"become effective needs to be signed by a key of a maintainer within the " +"Debian maintainer's keyring (available in the debian-keyring package). " +"Maintainer's keys are signed by other maintainers following pre-established " +"procedures to ensure the identity of the key holder." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:92 +msgid "" +"Once the uploaded package is verified and included in the archive, the " +"maintainer signature is stripped off, an MD5 sum of the package is computed " +"and put in the Packages file. The MD5 sum of all of the packages files are " +"then computed and put into the Release file. The Release file is then signed " +"by the archive key (which is created once a year) and distributed through " +"the FTP server. This key is also on the Debian keyring." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:102 +msgid "" +"Any end user can check the signature of the Release file, extract the MD5 " +"sum of a package from it and compare it with the MD5 sum of the package he " +"downloaded. Prior to version 0.6 only the MD5 sum of the downloaded Debian " +"package was checked. Now both the MD5 sum and the signature of the Release " +"file are checked." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:109 +msgid "" +"Notice that this is distinct from checking signatures on a per package " +"basis. It is designed to prevent two possible attacks:" +msgstr "" + +#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para> +#: apt-secure.8.xml:114 +msgid "" +"<literal>Network \"man in the middle\" attacks</literal>. Without signature " +"checking, a malicious agent can introduce himself in the package download " +"process and provide malicious software either by controlling a network " +"element (router, switch, etc.) or by redirecting traffic to a rogue server " +"(through arp or DNS spoofing attacks)." +msgstr "" + +#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para> +#: apt-secure.8.xml:122 +msgid "" +"<literal>Mirror network compromise</literal>. Without signature checking, a " +"malicious agent can compromise a mirror host and modify the files in it to " +"propagate malicious software to all users downloading packages from that " +"host." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:129 +msgid "" +"However, it does not defend against a compromise of the Debian master server " +"itself (which signs the packages) or against a compromise of the key used to " +"sign the Release files. In any case, this mechanism can complement a per-" +"package signature." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-secure.8.xml:135 +msgid "User configuration" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:137 +msgid "" +"<command>apt-key</command> is the program that manages the list of keys used " +"by apt. It can be used to add or remove keys although an installation of " +"this release will automatically provide the default Debian archive signing " +"keys used in the Debian package repositories." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:144 +msgid "" +"In order to add a new key you need to first download it (you should make " +"sure you are using a trusted communication channel when retrieving it), add " +"it with <command>apt-key</command> and then run <command>apt-get update</" +"command> so that apt can download and verify the <filename>Release.gpg</" +"filename> files from the archives you have configured." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-secure.8.xml:153 +msgid "Archive configuration" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:155 +msgid "" +"If you want to provide archive signatures in an archive under your " +"maintenance you have to:" +msgstr "" + +#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para> +#: apt-secure.8.xml:160 +msgid "" +"<emphasis>Create a toplevel Release file</emphasis>, if it does not exist " +"already. You can do this by running <command>apt-ftparchive release</" +"command> (provided in apt-utils)." +msgstr "" + +#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para> +#: apt-secure.8.xml:165 +msgid "" +"<emphasis>Sign it</emphasis>. You can do this by running <command>gpg -abs -" +"o Release.gpg Release</command>." +msgstr "" + +#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para> +#: apt-secure.8.xml:168 +msgid "" +"<emphasis>Publish the key fingerprint</emphasis>, that way your users will " +"know what key they need to import in order to authenticate the files in the " +"archive." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:175 +msgid "" +"Whenever the contents of the archive changes (new packages are added or " +"removed) the archive maintainer has to follow the first two steps previously " +"outlined." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:183 +msgid "" +"&apt-conf;, &apt-get;, &sources-list;, &apt-key;, &apt-ftparchive;, " +"&debsign; &debsig-verify;, &gpg;" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:187 +msgid "" +"For more background information you might want to review the <ulink url=" +"\"http://www.debian.org/doc/manuals/securing-debian-howto/ch7.en.html" +"\">Debian Security Infrastructure</ulink> chapter of the Securing Debian " +"Manual (available also in the harden-doc package) and the <ulink url=" +"\"http://www.cryptnet.net/fdp/crypto/strong_distro.html\" >Strong " +"Distribution HOWTO</ulink> by V. Alex Brennen." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt-secure.8.xml:200 +msgid "Manpage Authors" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml:202 +msgid "" +"This man-page is based on the work of Javier Fernández-Sanguino Peña, Isaac " +"Jones, Colin Walters, Florian Weimer and Michael Vogt." +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt-sortpkgs.1.xml:22 apt-sortpkgs.1.xml:29 +msgid "apt-sortpkgs" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt-sortpkgs.1.xml:30 +msgid "Utility to sort package index files" +msgstr "" + +#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis> +#: apt-sortpkgs.1.xml:36 +msgid "" +"<command>apt-sortpkgs</command> <arg><option>-hvs</option></arg> " +"<arg><option>-o=<replaceable>config string</replaceable></option></arg> " +"<arg><option>-c=<replaceable>file</replaceable></option></arg> <arg choice=" +"\"plain\" rep=\"repeat\"><replaceable>file</replaceable></arg>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-sortpkgs.1.xml:45 +msgid "" +"<command>apt-sortpkgs</command> will take an index file (Source index or " +"Package index) and sort the records so that they are ordered by the package " +"name. It will also sort the internal fields of each record according to the " +"internal sorting rules." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-sortpkgs.1.xml:51 +msgid "All output is sent to stdout, the input must be a seekable file." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-sortpkgs.1.xml:58 +msgid "<option>--source</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-sortpkgs.1.xml:60 +msgid "" +"Use Source index field ordering. Configuration Item: <literal>APT::" +"SortPkgs::Source</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-sortpkgs.1.xml:74 +msgid "" +"<command>apt-sortpkgs</command> returns zero on normal operation, decimal " +"100 on error." +msgstr "" + +#. The last update date +#. type: Content of: <refentry><refentryinfo> +#: apt.conf.5.xml:13 +msgid "" +"&apt-author.jgunthorpe; &apt-author.team; <author> <firstname>Daniel</" +"firstname> <surname>Burrows</surname> <contrib>Initial documentation of " +"Debug::*.</contrib> <email>dburrows@debian.org</email> </author> &apt-email; " +"&apt-product; <date>18 September 2009</date>" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt.conf.5.xml:28 apt.conf.5.xml:35 +msgid "apt.conf" +msgstr "" + +#. type: Content of: <refentry><refmeta><manvolnum> +#: apt.conf.5.xml:29 apt_preferences.5.xml:22 sources.list.5.xml:23 +msgid "5" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt.conf.5.xml:36 +msgid "Configuration file for APT" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:40 +msgid "" +"<filename>apt.conf</filename> is the main configuration file for the APT " +"suite of tools, all tools make use of the configuration file and a common " +"command line parser to provide a uniform environment. When an APT tool " +"starts up it will read the configuration specified by the <envar>APT_CONFIG</" +"envar> environment variable (if any) and then read the files in " +"<literal>Dir::Etc::Parts</literal> then read the main configuration file " +"specified by <literal>Dir::Etc::main</literal> then finally apply the " +"command line options to override the configuration directives, possibly " +"loading even more config files." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:50 +msgid "" +"The configuration file is organized in a tree with options organized into " +"functional groups. Option specification is given with a double colon " +"notation, for instance <literal>APT::Get::Assume-Yes</literal> is an option " +"within the APT tool group, for the Get tool. Options do not inherit from " +"their parent groups." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:56 +msgid "" +"Syntactically the configuration language is modeled after what the ISC tools " +"such as bind and dhcp use. Lines starting with <literal>//</literal> are " +"treated as comments (ignored), as well as all text between <literal>/*</" +"literal> and <literal>*/</literal>, just like C/C++ comments. Each line is " +"of the form <literal>APT::Get::Assume-Yes \"true\";</literal>. The trailing " +"semicolon and the quotes are required. The value must be on one line, and " +"there is no kind of string concatenation. It must not include inside " +"quotes. The behavior of the backslash \"\\\" and escaped characters inside " +"a value is undefined and it should not be used. An option name may include " +"alphanumerical characters and the \"/-:._+\" characters. A new scope can be " +"opened with curly braces, like:" +msgstr "" + +#. type: Content of: <refentry><refsect1><informalexample><programlisting> +#: apt.conf.5.xml:70 +#, no-wrap +msgid "" +"APT {\n" +" Get {\n" +" Assume-Yes \"true\";\n" +" Fix-Broken \"true\";\n" +" };\n" +"};\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:78 +msgid "" +"with newlines placed to make it more readable. Lists can be created by " +"opening a scope and including a single string enclosed in quotes followed by " +"a semicolon. Multiple entries can be included, each separated by a semicolon." +msgstr "" + +#. type: Content of: <refentry><refsect1><informalexample><programlisting> +#: apt.conf.5.xml:83 +#, no-wrap +msgid "DPkg::Pre-Install-Pkgs {\"/usr/sbin/dpkg-preconfigure --apt\";};\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:86 +msgid "" +"In general the sample configuration file in <filename>&docdir;examples/apt." +"conf</filename> &configureindex; is a good guide for how it should look." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:90 +msgid "" +"The names of the configuration items are not case-sensitive. So in the " +"previous example you could use <literal>dpkg::pre-install-pkgs</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:93 +msgid "" +"Names for the configuration items are optional if a list is defined as it " +"can be see in the <literal>DPkg::Pre-Install-Pkgs</literal> example above. " +"If you don't specify a name a new entry will simply add a new option to the " +"list. If you specify a name you can override the option as every other " +"option by reassigning a new value to the option." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:98 +msgid "" +"Two specials are allowed, <literal>#include</literal> (which is deprecated " +"and not supported by alternative implementations) and <literal>#clear</" +"literal>: <literal>#include</literal> will include the given file, unless " +"the filename ends in a slash, then the whole directory is included. " +"<literal>#clear</literal> is used to erase a part of the configuration tree. " +"The specified element and all its descendants are erased. (Note that these " +"lines also need to end with a semicolon.)" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:106 +msgid "" +"The #clear command is the only way to delete a list or a complete scope. " +"Reopening a scope or the ::-style described below will <emphasis>not</" +"emphasis> override previously written entries. Only options can be " +"overridden by addressing a new value to it - lists and scopes can't be " +"overridden, only cleared." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:111 +msgid "" +"All of the APT tools take a -o option which allows an arbitrary " +"configuration directive to be specified on the command line. The syntax is a " +"full option name (<literal>APT::Get::Assume-Yes</literal> for instance) " +"followed by an equals sign then the new value of the option. Lists can be " +"appended too by adding a trailing :: to the list name. (As you might " +"suspect: The scope syntax can't be used on the command line.)" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:118 +msgid "" +"Note that you can use :: only for appending one item per line to a list and " +"that you should not use it in combination with the scope syntax. (The scope " +"syntax implicit insert ::) Using both syntaxes together will trigger a bug " +"which some users unfortunately relay on: An option with the unusual name " +"\"<literal>::</literal>\" which acts like every other option with a name. " +"These introduces many problems including that a user who writes multiple " +"lines in this <emphasis>wrong</emphasis> syntax in the hope to append to a " +"list will gain the opposite as only the last assignment for this option " +"\"<literal>::</literal>\" will be used. Upcoming APT versions will raise " +"errors and will stop working if they encounter this misuse, so please " +"correct such statements now as long as APT doesn't complain explicit about " +"them." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt.conf.5.xml:130 +msgid "The APT Group" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:131 +msgid "" +"This group of options controls general APT behavior as well as holding the " +"options for all of the tools." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:135 +msgid "Architecture" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:136 +msgid "" +"System Architecture; sets the architecture to use when fetching files and " +"parsing package lists. The internal default is the architecture apt was " +"compiled for." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:141 +msgid "Default-Release" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:142 +msgid "" +"Default release to install packages from if more than one version available. " +"Contains release name, codename or release version. Examples: 'stable', " +"'testing', 'unstable', 'lenny', 'squeeze', '4.0', '5.0*'. See also &apt-" +"preferences;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:146 +msgid "Ignore-Hold" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:147 +msgid "" +"Ignore Held packages; This global option causes the problem resolver to " +"ignore held packages in its decision making." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:151 +msgid "Clean-Installed" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:152 +msgid "" +"Defaults to on. When turned on the autoclean feature will remove any " +"packages which can no longer be downloaded from the cache. If turned off " +"then packages that are locally installed are also excluded from cleaning - " +"but note that APT provides no direct means to reinstall them." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:158 +msgid "Immediate-Configure" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:159 +msgid "" +"Defaults to on which will cause APT to install essential and important " +"packages as fast as possible in the install/upgrade operation. This is done " +"to limit the effect of a failing &dpkg; call: If this option is disabled APT " +"does treat an important package in the same way as an extra package: Between " +"the unpacking of the important package A and his configuration can then be " +"many other unpack or configuration calls, e.g. for package B which has no " +"relation to A, but causes the dpkg call to fail (e.g. because maintainer " +"script of package B generates an error) which results in a system state in " +"which package A is unpacked but unconfigured - each package depending on A " +"is now no longer guaranteed to work as their dependency on A is not longer " +"satisfied. The immediate configuration marker is also applied to all " +"dependencies which can generate a problem if the dependencies e.g. form a " +"circle as a dependency with the immediate flag is comparable with a Pre-" +"Dependency. So in theory it is possible that APT encounters a situation in " +"which it is unable to perform immediate configuration, error out and refers " +"to this option so the user can deactivate the immediate configuration " +"temporary to be able to perform an install/upgrade again. Note the use of " +"the word \"theory\" here as this problem was only encountered by now in real " +"world a few times in non-stable distribution versions and caused by wrong " +"dependencies of the package in question or by a system in an already broken " +"state, so you should not blindly disable this option as the mentioned " +"scenario above is not the only problem immediate configuration can help to " +"prevent in the first place. Before a big operation like <literal>dist-" +"upgrade</literal> is run with this option disabled it should be tried to " +"explicitly <literal>install</literal> the package APT is unable to configure " +"immediately, but please make sure to report your problem also to your " +"distribution and to the APT team with the buglink below so they can work on " +"improving or correcting the upgrade process." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:181 +msgid "Force-LoopBreak" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:182 +msgid "" +"Never Enable this option unless you -really- know what you are doing. It " +"permits APT to temporarily remove an essential package to break a Conflicts/" +"Conflicts or Conflicts/Pre-Depend loop between two essential packages. SUCH " +"A LOOP SHOULD NEVER EXIST AND IS A GRAVE BUG. This option will work if the " +"essential packages are not tar, gzip, libc, dpkg, bash or anything that " +"those packages depend on." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:190 +msgid "Cache-Limit" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:191 +msgid "" +"APT uses a fixed size memory mapped cache file to store the 'available' " +"information. This sets the size of that cache (in bytes)." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:195 +msgid "Build-Essential" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:196 +msgid "Defines which package(s) are considered essential build dependencies." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:199 +msgid "Get" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:200 +msgid "" +"The Get subsection controls the &apt-get; tool, please see its documentation " +"for more information about the options here." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:204 +msgid "Cache" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:205 +msgid "" +"The Cache subsection controls the &apt-cache; tool, please see its " +"documentation for more information about the options here." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:209 +msgid "CDROM" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:210 +msgid "" +"The CDROM subsection controls the &apt-cdrom; tool, please see its " +"documentation for more information about the options here." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt.conf.5.xml:216 +msgid "The Acquire Group" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:221 +msgid "PDiffs" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:222 +msgid "" +"Try to download deltas called <literal>PDiffs</literal> for Packages or " +"Sources files instead of downloading whole ones. True by default." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:227 +msgid "Queue-Mode" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:228 +msgid "" +"Queuing mode; <literal>Queue-Mode</literal> can be one of <literal>host</" +"literal> or <literal>access</literal> which determines how APT parallelizes " +"outgoing connections. <literal>host</literal> means that one connection per " +"target host will be opened, <literal>access</literal> means that one " +"connection per URI type will be opened." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:235 +msgid "Retries" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:236 +msgid "" +"Number of retries to perform. If this is non-zero APT will retry failed " +"files the given number of times." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:240 +msgid "Source-Symlinks" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:241 +msgid "" +"Use symlinks for source archives. If set to true then source archives will " +"be symlinked when possible instead of copying. True is the default." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:245 sources.list.5.xml:139 +msgid "http" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:246 +msgid "" +"HTTP URIs; http::Proxy is the default http proxy to use. It is in the " +"standard form of <literal>http://[[user][:pass]@]host[:port]/</literal>. Per " +"host proxies can also be specified by using the form <literal>http::Proxy::" +"<host></literal> with the special keyword <literal>DIRECT</literal> " +"meaning to use no proxies. If no one of the above settings is specified, " +"<envar>http_proxy</envar> environment variable will be used." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:254 +msgid "" +"Three settings are provided for cache control with HTTP/1.1 compliant proxy " +"caches. <literal>No-Cache</literal> tells the proxy to not use its cached " +"response under any circumstances, <literal>Max-Age</literal> is sent only " +"for index files and tells the cache to refresh its object if it is older " +"than the given number of seconds. Debian updates its index files daily so " +"the default is 1 day. <literal>No-Store</literal> specifies that the cache " +"should never store this request, it is only set for archive files. This may " +"be useful to prevent polluting a proxy cache with very large .deb files. " +"Note: Squid 2.0.2 does not support any of these options." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:264 apt.conf.5.xml:321 +msgid "" +"The option <literal>timeout</literal> sets the timeout timer used by the " +"method, this applies to all things including connection timeout and data " +"timeout." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:267 +msgid "" +"One setting is provided to control the pipeline depth in cases where the " +"remote server is not RFC conforming or buggy (such as Squid 2.0.2). " +"<literal>Acquire::http::Pipeline-Depth</literal> can be a value from 0 to 5 " +"indicating how many outstanding requests APT should send. A value of zero " +"MUST be specified if the remote host does not properly linger on TCP " +"connections - otherwise data corruption will occur. Hosts which require this " +"are in violation of RFC 2068." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:275 +msgid "" +"The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</" +"literal> which accepts integer values in kilobyte. The default value is 0 " +"which deactivates the limit and tries uses as much as possible of the " +"bandwidth (Note that this option implicit deactivates the download from " +"multiple servers at the same time.)" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:281 +msgid "https" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:282 +msgid "" +"HTTPS URIs. Cache-control and proxy options are the same as for " +"<literal>http</literal> method. <literal>Pipeline-Depth</literal> option is " +"not supported yet." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:286 +msgid "" +"<literal>CaInfo</literal> suboption specifies place of file that holds info " +"about trusted certificates. <literal><host>::CaInfo</literal> is " +"corresponding per-host option. <literal>Verify-Peer</literal> boolean " +"suboption determines whether verify server's host certificate against " +"trusted certificates or not. <literal><host>::Verify-Peer</literal> " +"is corresponding per-host option. <literal>Verify-Host</literal> boolean " +"suboption determines whether verify server's hostname or not. <literal><" +"host>::Verify-Host</literal> is corresponding per-host option. " +"<literal>SslCert</literal> determines what certificate to use for client " +"authentication. <literal><host>::SslCert</literal> is corresponding " +"per-host option. <literal>SslKey</literal> determines what private key to " +"use for client authentication. <literal><host>::SslKey</literal> is " +"corresponding per-host option. <literal>SslForceVersion</literal> overrides " +"default SSL version to use. Can contain 'TLSv1' or 'SSLv3' string. " +"<literal><host>::SslForceVersion</literal> is corresponding per-host " +"option." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:304 sources.list.5.xml:150 +msgid "ftp" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:305 +msgid "" +"FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the standard " +"form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. Per host " +"proxies can also be specified by using the form <literal>ftp::Proxy::<" +"host></literal> with the special keyword <literal>DIRECT</literal> " +"meaning to use no proxies. If no one of the above settings is specified, " +"<envar>ftp_proxy</envar> environment variable will be used. To use a ftp " +"proxy you will have to set the <literal>ftp::ProxyLogin</literal> script in " +"the configuration file. This entry specifies the commands to send to tell " +"the proxy server what to connect to. Please see &configureindex; for an " +"example of how to do this. The substitution variables available are <literal>" +"$(PROXY_USER)</literal> <literal>$(PROXY_PASS)</literal> <literal>" +"$(SITE_USER)</literal> <literal>$(SITE_PASS)</literal> <literal>$(SITE)</" +"literal> and <literal>$(SITE_PORT)</literal> Each is taken from it's " +"respective URI component." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:324 +msgid "" +"Several settings are provided to control passive mode. Generally it is safe " +"to leave passive mode on, it works in nearly every environment. However " +"some situations require that passive mode be disabled and port mode ftp used " +"instead. This can be done globally, for connections that go through a proxy " +"or for a specific host (See the sample config file for examples)." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:331 +msgid "" +"It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</" +"envar> environment variable to a http url - see the discussion of the http " +"method above for syntax. You cannot set this in the configuration file and " +"it is not recommended to use FTP over HTTP due to its low efficiency." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:336 +msgid "" +"The setting <literal>ForceExtended</literal> controls the use of RFC2428 " +"<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is " +"false, which means these commands are only used if the control connection is " +"IPv6. Setting this to true forces their use even on IPv4 connections. Note " +"that most FTP servers do not support RFC2428." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:343 sources.list.5.xml:132 +msgid "cdrom" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> +#: apt.conf.5.xml:349 +#, no-wrap +msgid "/cdrom/::Mount \"foo\";" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:344 +msgid "" +"CDROM URIs; the only setting for CDROM URIs is the mount point, " +"<literal>cdrom::Mount</literal> which must be the mount point for the CDROM " +"drive as specified in <filename>/etc/fstab</filename>. It is possible to " +"provide alternate mount and unmount commands if your mount point cannot be " +"listed in the fstab (such as an SMB mount and old mount packages). The " +"syntax is to put <placeholder type=\"literallayout\" id=\"0\"/> within the " +"cdrom block. It is important to have the trailing slash. Unmount commands " +"can be specified using UMount." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:354 +msgid "gpgv" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:355 +msgid "" +"GPGV URIs; the only option for GPGV URIs is the option to pass additional " +"parameters to gpgv. <literal>gpgv::Options</literal> Additional options " +"passed to gpgv." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:360 +msgid "CompressionTypes" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> +#: apt.conf.5.xml:366 +#, no-wrap +msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:361 +msgid "" +"List of compression types which are understood by the acquire methods. " +"Files like <filename>Packages</filename> can be available in various " +"compression formats. Per default the acquire methods can decompress " +"<command>bzip2</command>, <command>lzma</command> and <command>gzip</" +"command> compressed files, with this setting more formats can be added on " +"the fly or the used method can be changed. The syntax for this is: " +"<placeholder type=\"synopsis\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> +#: apt.conf.5.xml:371 +#, no-wrap +msgid "Acquire::CompressionTypes::Order:: \"gz\";" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> +#: apt.conf.5.xml:374 +#, no-wrap +msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:367 +msgid "" +"Also the <literal>Order</literal> subgroup can be used to define in which " +"order the acquire system will try to download the compressed files. The " +"acquire system will try the first and proceed with the next compression type " +"in this list on error, so to prefer one over the other type simple add the " +"preferred type at first - not already added default types will be added at " +"run time to the end of the list, so e.g. <placeholder type=\"synopsis\" id=" +"\"0\"/> can be used to prefer <command>gzip</command> compressed files over " +"<command>bzip2</command> and <command>lzma</command>. If <command>lzma</" +"command> should be preferred over <command>gzip</command> and " +"<command>bzip2</command> the configure setting should look like this " +"<placeholder type=\"synopsis\" id=\"1\"/> It is not needed to add " +"<literal>bz2</literal> explicit to the list as it will be added automatic." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> +#: apt.conf.5.xml:378 +#, no-wrap +msgid "Dir::Bin::bzip2 \"/bin/bzip2\";" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:376 +msgid "" +"Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</" +"replaceable></literal> will be checked: If this setting exists the method " +"will only be used if this file exists, e.g. for the bzip2 method (the " +"inbuilt) setting is <placeholder type=\"literallayout\" id=\"0\"/> Note also " +"that list entries specified on the command line will be added at the end of " +"the list specified in the configuration files, but before the default " +"entries. To prefer a type in this case over the ones specified in in the " +"configuration files you can set the option direct - not in list style. This " +"will not override the defined list, it will only prefix the list with this " +"type." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:383 +msgid "" +"While it is possible to add an empty compression type to the order list, but " +"APT in its current version doesn't understand it correctly and will display " +"many warnings about not downloaded files - these warnings are most of the " +"time false negatives. Future versions will maybe include a way to really " +"prefer uncompressed files to support the usage of local mirrors." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:217 +msgid "" +"The <literal>Acquire</literal> group of options controls the download of " +"packages and the URI handlers. <placeholder type=\"variablelist\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt.conf.5.xml:392 +msgid "Directories" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:394 +msgid "" +"The <literal>Dir::State</literal> section has directories that pertain to " +"local state information. <literal>lists</literal> is the directory to place " +"downloaded package lists in and <literal>status</literal> is the name of the " +"dpkg status file. <literal>preferences</literal> is the name of the APT " +"preferences file. <literal>Dir::State</literal> contains the default " +"directory to prefix on all sub items if they do not start with <filename>/</" +"filename> or <filename>./</filename>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:401 +msgid "" +"<literal>Dir::Cache</literal> contains locations pertaining to local cache " +"information, such as the two package caches <literal>srcpkgcache</literal> " +"and <literal>pkgcache</literal> as well as the location to place downloaded " +"archives, <literal>Dir::Cache::archives</literal>. Generation of caches can " +"be turned off by setting their names to be blank. This will slow down " +"startup but save disk space. It is probably preferred to turn off the " +"pkgcache rather than the srcpkgcache. Like <literal>Dir::State</literal> the " +"default directory is contained in <literal>Dir::Cache</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:410 +msgid "" +"<literal>Dir::Etc</literal> contains the location of configuration files, " +"<literal>sourcelist</literal> gives the location of the sourcelist and " +"<literal>main</literal> is the default configuration file (setting has no " +"effect, unless it is done from the config file specified by " +"<envar>APT_CONFIG</envar>)." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:416 +msgid "" +"The <literal>Dir::Parts</literal> setting reads in all the config fragments " +"in lexical order from the directory specified. After this is done then the " +"main config file is loaded." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:420 +msgid "" +"Binary programs are pointed to by <literal>Dir::Bin</literal>. <literal>Dir::" +"Bin::Methods</literal> specifies the location of the method handlers and " +"<literal>gzip</literal>, <literal>bzip2</literal>, <literal>lzma</literal>, " +"<literal>dpkg</literal>, <literal>apt-get</literal> <literal>dpkg-source</" +"literal> <literal>dpkg-buildpackage</literal> and <literal>apt-cache</" +"literal> specify the location of the respective programs." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:428 +msgid "" +"The configuration item <literal>RootDir</literal> has a special meaning. If " +"set, all paths in <literal>Dir::</literal> will be relative to " +"<literal>RootDir</literal>, <emphasis>even paths that are specified " +"absolutely</emphasis>. So, for instance, if <literal>RootDir</literal> is " +"set to <filename>/tmp/staging</filename> and <literal>Dir::State::status</" +"literal> is set to <filename>/var/lib/dpkg/status</filename>, then the " +"status file will be looked up in <filename>/tmp/staging/var/lib/dpkg/status</" +"filename>." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt.conf.5.xml:441 +msgid "APT in DSelect" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:443 +msgid "" +"When APT is used as a &dselect; method several configuration directives " +"control the default behaviour. These are in the <literal>DSelect</literal> " +"section." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:447 +msgid "Clean" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:448 +msgid "" +"Cache Clean mode; this value may be one of always, prompt, auto, pre-auto " +"and never. always and prompt will remove all packages from the cache after " +"upgrading, prompt (the default) does so conditionally. auto removes only " +"those packages which are no longer downloadable (replaced with a new version " +"for instance). pre-auto performs this action before downloading new " +"packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:457 +msgid "" +"The contents of this variable is passed to &apt-get; as command line options " +"when it is run for the install phase." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:461 +msgid "Updateoptions" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:462 +msgid "" +"The contents of this variable is passed to &apt-get; as command line options " +"when it is run for the update phase." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:466 +msgid "PromptAfterUpdate" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:467 +msgid "" +"If true the [U]pdate operation in &dselect; will always prompt to continue. " +"The default is to prompt only on error." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt.conf.5.xml:473 +msgid "How APT calls dpkg" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:474 +msgid "" +"Several configuration directives control how APT invokes &dpkg;. These are " +"in the <literal>DPkg</literal> section." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:479 +msgid "" +"This is a list of options to pass to dpkg. The options must be specified " +"using the list notation and each list item is passed as a single argument to " +"&dpkg;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:484 +msgid "Pre-Invoke" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:484 +msgid "Post-Invoke" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:485 +msgid "" +"This is a list of shell commands to run before/after invoking &dpkg;. Like " +"<literal>options</literal> this must be specified in list notation. The " +"commands are invoked in order using <filename>/bin/sh</filename>, should any " +"fail APT will abort." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:491 +msgid "Pre-Install-Pkgs" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:492 +msgid "" +"This is a list of shell commands to run before invoking dpkg. Like " +"<literal>options</literal> this must be specified in list notation. The " +"commands are invoked in order using <filename>/bin/sh</filename>, should any " +"fail APT will abort. APT will pass to the commands on standard input the " +"filenames of all .deb files it is going to install, one per line." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:498 +msgid "" +"Version 2 of this protocol dumps more information, including the protocol " +"version, the APT configuration space and the packages, files and versions " +"being changed. Version 2 is enabled by setting <literal>DPkg::Tools::" +"options::cmd::Version</literal> to 2. <literal>cmd</literal> is a command " +"given to <literal>Pre-Install-Pkgs</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:505 +msgid "Run-Directory" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:506 +msgid "" +"APT chdirs to this directory before invoking dpkg, the default is <filename>/" +"</filename>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:510 +msgid "Build-options" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:511 +msgid "" +"These options are passed to &dpkg-buildpackage; when compiling packages, the " +"default is to disable signing and produce all binaries." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt.conf.5.xml:516 +msgid "dpkg trigger usage (and related options)" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt.conf.5.xml:517 +msgid "" +"APT can call dpkg in a way so it can make aggressive use of triggers over " +"multiply calls of dpkg. Without further options dpkg will use triggers only " +"in between his own run. Activating these options can therefore decrease the " +"time needed to perform the install / upgrade. Note that it is intended to " +"activate these options per default in the future, but as it changes the way " +"APT calling dpkg drastically it needs a lot more testing. <emphasis>These " +"options are therefore currently experimental and should not be used in " +"productive environments.</emphasis> Also it breaks the progress reporting so " +"all frontends will currently stay around half (or more) of the time in the " +"100% state while it actually configures all packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><literallayout> +#: apt.conf.5.xml:532 +#, no-wrap +msgid "" +"DPkg::NoTriggers \"true\";\n" +"PackageManager::Configure \"smart\";\n" +"DPkg::ConfigurePending \"true\";\n" +"DPkg::TriggersPending \"true\";" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt.conf.5.xml:526 +msgid "" +"Note that it is not guaranteed that APT will support these options or that " +"these options will not cause (big) trouble in the future. If you have " +"understand the current risks and problems with these options, but are brave " +"enough to help testing them create a new configuration file and test a " +"combination of options. Please report any bugs, problems and improvements " +"you encounter and make sure to note which options you have used in your " +"reports. Asking dpkg for help could also be useful for debugging proposes, " +"see e.g. <command>dpkg --audit</command>. A defensive option combination " +"would be <placeholder type=\"literallayout\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt.conf.5.xml:538 +msgid "DPkg::NoTriggers" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:539 +msgid "" +"Add the no triggers flag to all dpkg calls (except the ConfigurePending " +"call). See &dpkg; if you are interested in what this actually means. In " +"short: dpkg will not run the triggers when this flag is present unless it is " +"explicitly called to do so in an extra call. Note that this option exists " +"(undocumented) also in older apt versions with a slightly different meaning: " +"Previously these option only append --no-triggers to the configure calls to " +"dpkg - now apt will add these flag also to the unpack and remove calls." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt.conf.5.xml:546 +msgid "PackageManager::Configure" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:547 +msgid "" +"Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " +"and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default " +"value and causes APT to configure all packages explicit. The " +"\"<literal>smart</literal>\" way is it to configure only packages which need " +"to be configured before another package can be unpacked (Pre-Depends) and " +"let the rest configure by dpkg with a call generated by the next option. " +"\"<literal>no</literal>\" on the other hand will not configure anything and " +"totally rely on dpkg for configuration (which will at the moment fail if a " +"Pre-Depends is encountered). Setting this option to another than the all " +"value will implicitly activate also the next option per default as otherwise " +"the system could end in an unconfigured status which could be unbootable!" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt.conf.5.xml:557 +msgid "DPkg::ConfigurePending" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:558 +msgid "" +"If this option is set apt will call <command>dpkg --configure --pending</" +"command> to let dpkg handle all required configurations and triggers. This " +"option is activated automatic per default if the previous option is not set " +"to <literal>all</literal>, but deactivating could be useful if you want to " +"run APT multiple times in a row - e.g. in an installer. In these sceneries " +"you could deactivate this option in all but the last run." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt.conf.5.xml:564 +msgid "DPkg::TriggersPending" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:565 +msgid "" +"Useful for <literal>smart</literal> configuration as a package which has " +"pending triggers is not considered as <literal>installed</literal> and dpkg " +"treats them as <literal>unpacked</literal> currently which is a dealbreaker " +"for Pre-Dependencies (see debbugs #526774). Note that this will process all " +"triggers, not only the triggers needed to configure this package." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt.conf.5.xml:570 +msgid "PackageManager::UnpackAll" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:571 +msgid "" +"As the configuration can be deferred to be done at the end by dpkg it can be " +"tried to order the unpack series only by critical needs, e.g. by Pre-" +"Depends. Default is true and therefore the \"old\" method of ordering in " +"various steps by everything. While both method were present in earlier APT " +"versions the <literal>OrderCritical</literal> method was unused, so this " +"method is very experimental and needs further improvements before becoming " +"really useful." +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> +#: apt.conf.5.xml:578 +msgid "OrderList::Score::Immediate" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout> +#: apt.conf.5.xml:586 +#, no-wrap +msgid "" +"OrderList::Score {\n" +"\tDelete 500;\n" +"\tEssential 200;\n" +"\tImmediate 10;\n" +"\tPreDepends 50;\n" +"};" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:579 +msgid "" +"Essential packages (and there dependencies) should be configured immediately " +"after unpacking. It will be a good idea to do this quite early in the " +"upgrade process as these these configure calls require currently also " +"<literal>DPkg::TriggersPending</literal> which will run quite a few triggers " +"(which maybe not needed). Essentials get per default a high score but the " +"immediate flag is relatively low (a package which has a Pre-Depends is " +"higher rated). These option and the others in the same group can be used to " +"change the scoring. The following example shows the settings with there " +"default values. <placeholder type=\"literallayout\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt.conf.5.xml:599 +msgid "Periodic and Archives options" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:600 +msgid "" +"<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups " +"of options configure behavior of apt periodic updates, which is done by " +"<literal>/etc/cron.daily/apt</literal> script. See header of this script for " +"the brief documentation of these options." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: apt.conf.5.xml:608 +msgid "Debug options" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:610 +msgid "" +"Enabling options in the <literal>Debug::</literal> section will cause " +"debugging information to be sent to the standard error stream of the program " +"utilizing the <literal>apt</literal> libraries, or enable special program " +"modes that are primarily useful for debugging the behavior of <literal>apt</" +"literal>. Most of these options are not interesting to a normal user, but a " +"few may be:" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> +#: apt.conf.5.xml:621 +msgid "" +"<literal>Debug::pkgProblemResolver</literal> enables output about the " +"decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</" +"literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> +#: apt.conf.5.xml:629 +msgid "" +"<literal>Debug::NoLocking</literal> disables all file locking. This can be " +"used to run some operations (for instance, <literal>apt-get -s install</" +"literal>) as a non-root user." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> +#: apt.conf.5.xml:638 +msgid "" +"<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each " +"time that <literal>apt</literal> invokes &dpkg;." +msgstr "" + +#. TODO: provide a +#. motivating example, except I haven't a clue why you'd want +#. to do this. +#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> +#: apt.conf.5.xml:646 +msgid "" +"<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data " +"in CDROM IDs." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:656 +msgid "A full list of debugging options to apt follows." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:661 +#, fuzzy +msgid "<literal>Debug::Acquire::cdrom</literal>" +msgstr "a linha <literal>Archive:</literal>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:665 +msgid "" +"Print information related to accessing <literal>cdrom://</literal> sources." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:672 +#, fuzzy +msgid "<literal>Debug::Acquire::ftp</literal>" +msgstr "a linha <literal>Archive:</literal>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:676 +msgid "Print information related to downloading packages using FTP." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:683 +#, fuzzy +msgid "<literal>Debug::Acquire::http</literal>" +msgstr "a linha <literal>Archive:</literal>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:687 +msgid "Print information related to downloading packages using HTTP." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:694 +#, fuzzy +msgid "<literal>Debug::Acquire::https</literal>" +msgstr "a linha <literal>Archive:</literal>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:698 +msgid "Print information related to downloading packages using HTTPS." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:705 +#, fuzzy +msgid "<literal>Debug::Acquire::gpgv</literal>" +msgstr "a linha <literal>Archive:</literal>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:709 +msgid "" +"Print information related to verifying cryptographic signatures using " +"<literal>gpg</literal>." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:716 +#, fuzzy +msgid "<literal>Debug::aptcdrom</literal>" +msgstr "a linha <literal>Version:</literal>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:720 +msgid "" +"Output information about the process of accessing collections of packages " +"stored on CD-ROMs." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:727 +#, fuzzy +msgid "<literal>Debug::BuildDeps</literal>" +msgstr "a linha <literal>Label:</literal>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:730 +msgid "Describes the process of resolving build-dependencies in &apt-get;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:737 +#, fuzzy +msgid "<literal>Debug::Hashes</literal>" +msgstr "a linha <literal>Label:</literal>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:740 +msgid "" +"Output each cryptographic hash that is generated by the <literal>apt</" +"literal> libraries." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:747 +#, fuzzy +msgid "<literal>Debug::IdentCDROM</literal>" +msgstr "a linha <literal>Label:</literal>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:750 +msgid "" +"Do not include information from <literal>statfs</literal>, namely the number " +"of used and free blocks on the CD-ROM filesystem, when generating an ID for " +"a CD-ROM." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:758 +#, fuzzy +msgid "<literal>Debug::NoLocking</literal>" +msgstr "a linha <literal>Origin:</literal>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:761 +msgid "" +"Disable all file locking. For instance, this will allow two instances of " +"<quote><literal>apt-get update</literal></quote> to run at the same time." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:769 +#, fuzzy +msgid "<literal>Debug::pkgAcquire</literal>" +msgstr "a linha <literal>Archive:</literal>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:773 +msgid "Log when items are added to or removed from the global download queue." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:780 +#, fuzzy +msgid "<literal>Debug::pkgAcquire::Auth</literal>" +msgstr "a linha <literal>Archive:</literal>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:783 +msgid "" +"Output status messages and errors related to verifying checksums and " +"cryptographic signatures of downloaded files." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:790 +#, fuzzy +msgid "<literal>Debug::pkgAcquire::Diffs</literal>" +msgstr "a linha <literal>Archive:</literal>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:793 +msgid "" +"Output information about downloading and applying package index list diffs, " +"and errors relating to package index list diffs." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:801 +#, fuzzy +msgid "<literal>Debug::pkgAcquire::RRed</literal>" +msgstr "a linha <literal>Archive:</literal>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:805 +msgid "" +"Output information related to patching apt package lists when downloading " +"index diffs instead of full indices." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:812 +#, fuzzy +msgid "<literal>Debug::pkgAcquire::Worker</literal>" +msgstr "a linha <literal>Archive:</literal>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:816 +msgid "" +"Log all interactions with the sub-processes that actually perform downloads." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:823 +msgid "<literal>Debug::pkgAutoRemove</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:827 +msgid "" +"Log events related to the automatically-installed status of packages and to " +"the removal of unused packages." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:834 +msgid "<literal>Debug::pkgDepCache::AutoInstall</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:837 +msgid "" +"Generate debug messages describing which packages are being automatically " +"installed to resolve dependencies. This corresponds to the initial auto-" +"install pass performed in, e.g., <literal>apt-get install</literal>, and not " +"to the full <literal>apt</literal> dependency resolver; see <literal>Debug::" +"pkgProblemResolver</literal> for that." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:848 +msgid "<literal>Debug::pkgDepCache::Marker</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:851 +msgid "" +"Generate debug messages describing which package is marked as keep/install/" +"remove while the ProblemResolver does his work. Each addition or deletion " +"may trigger additional actions; they are shown indented two additional space " +"under the original entry. The format for each line is <literal>MarkKeep</" +"literal>, <literal>MarkDelete</literal> or <literal>MarkInstall</literal> " +"followed by <literal>package-name <a.b.c -> d.e.f | x.y.z> (section)" +"</literal> where <literal>a.b.c</literal> is the current version of the " +"package, <literal>d.e.f</literal> is the version considered for installation " +"and <literal>x.y.z</literal> is a newer version, but not considered for " +"installation (because of a low pin score). The later two can be omitted if " +"there is none or if it is the same version as the installed. " +"<literal>section</literal> is the name of the section the package appears in." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:870 +#, fuzzy +msgid "<literal>Debug::pkgInitConfig</literal>" +msgstr "a linha <literal>Version:</literal>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:873 +msgid "Dump the default configuration to standard error on startup." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:880 +#, fuzzy +msgid "<literal>Debug::pkgDPkgPM</literal>" +msgstr "a linha <literal>Package:</literal>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:883 +msgid "" +"When invoking &dpkg;, output the precise command line with which it is being " +"invoked, with arguments separated by a single space character." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:891 +msgid "<literal>Debug::pkgDPkgProgressReporting</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:894 +msgid "" +"Output all the data received from &dpkg; on the status file descriptor and " +"any errors encountered while parsing it." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:901 +#, fuzzy +msgid "<literal>Debug::pkgOrderList</literal>" +msgstr "a linha <literal>Origin:</literal>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:905 +msgid "" +"Generate a trace of the algorithm that decides the order in which " +"<literal>apt</literal> should pass packages to &dpkg;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:913 +#, fuzzy +msgid "<literal>Debug::pkgPackageManager</literal>" +msgstr "a linha <literal>Package:</literal>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:917 +msgid "" +"Output status messages tracing the steps performed when invoking &dpkg;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:924 +#, fuzzy +msgid "<literal>Debug::pkgPolicy</literal>" +msgstr "a linha <literal>Label:</literal>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:928 +msgid "Output the priority of each package list on startup." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:934 +msgid "<literal>Debug::pkgProblemResolver</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:938 +msgid "" +"Trace the execution of the dependency resolver (this applies only to what " +"happens when a complex dependency problem is encountered)." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:946 +msgid "<literal>Debug::pkgProblemResolver::ShowScores</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:949 +msgid "" +"Display a list of all installed packages with their calculated score used by " +"the pkgProblemResolver. The description of the package is the same as " +"described in <literal>Debug::pkgDepCache::Marker</literal>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt.conf.5.xml:957 +#, fuzzy +msgid "<literal>Debug::sourceList</literal>" +msgstr "a linha <literal>Version:</literal>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:961 +msgid "" +"Print information about the vendors read from <filename>/etc/apt/vendors." +"list</filename>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:983 +msgid "" +"&configureindex; is a configuration file showing example values for all " +"possible options." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist> +#: apt.conf.5.xml:990 +msgid "&file-aptconf;" +msgstr "" + +#. ? reading apt.conf +#. type: Content of: <refentry><refsect1><para> +#: apt.conf.5.xml:995 +#, fuzzy +msgid "&apt-cache;, &apt-config;, &apt-preferences;." +msgstr "&apt-get; &apt-cache; &apt-conf; &sources-list;" + +#. The last update date +#. type: Content of: <refentry><refentryinfo> +#: apt_preferences.5.xml:13 +msgid "&apt-author.team; &apt-email; &apt-product; <date>04 May 2009</date>" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refname> +#: apt_preferences.5.xml:21 apt_preferences.5.xml:28 +#, fuzzy +msgid "apt_preferences" +msgstr "apt_preferences" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: apt_preferences.5.xml:29 +#, fuzzy +msgid "Preference control file for APT" +msgstr "Arquivo de controle de preferências para o APT" + +#. type: Content of: <refentry><refsect1><para> +#: apt_preferences.5.xml:34 +#, fuzzy +msgid "" +"The APT preferences file <filename>/etc/apt/preferences</filename> and the " +"fragment files in the <filename>/etc/apt/preferences.d/</filename> folder " +"can be used to control which versions of packages will be selected for " +"installation." +msgstr "" +"O arquivo de preferências do APT <filename>/etc/apt/preferences</filename> " +"pode ser usado para controlar quais versões de pacotes serão selecionadas " +"para instalação." + +#. type: Content of: <refentry><refsect1><para> +#: apt_preferences.5.xml:39 +#, fuzzy +msgid "" +"Several versions of a package may be available for installation when the " +"&sources-list; file contains references to more than one distribution (for " +"example, <literal>stable</literal> and <literal>testing</literal>). APT " +"assigns a priority to each version that is available. Subject to dependency " +"constraints, <command>apt-get</command> selects the version with the highest " +"priority for installation. The APT preferences file overrides the " +"priorities that APT assigns to package versions by default, thus giving the " +"user control over which one is selected for installation." +msgstr "" +"Diversas versões de um pacote podem estar disponíveis para instalação quando " +"o arquivo &sources-list; contém referências para mais de uma distribuição " +"(por exemplo, <literal>stable</literal> e <literal>testing</literal>). O APT " +"atribui uma prioridade para cada versão que esteja disponível. Sujeito a " +"obstáculos de dependências, o <command>apt-get</command> seleciona para " +"instalação a versão com a maior prioridade. O arquivo de preferências do APT " +"sobrepoe as prioridades que o APT atribui a cada versão de pacote por " +"padrão, dando assim ao usuário controle sobre qual versão do pacote é " +"selecionada para instalação." + +#. type: Content of: <refentry><refsect1><para> +#: apt_preferences.5.xml:49 +#, fuzzy +msgid "" +"Several instances of the same version of a package may be available when the " +"&sources-list; file contains references to more than one source. In this " +"case <command>apt-get</command> downloads the instance listed earliest in " +"the &sources-list; file. The APT preferences file does not affect the " +"choice of instance, only the choice of version." +msgstr "" +"Diversas instâncias da mesma versão de um pacote pode estar disponíveis " +"quando o arquivo &sources-list; contém referências a mais de uma fonte. " +"Nesse caso, o <command>apt-get</command> faz o download da instância listada " +"antes no arquivo &sources-list; . O arquivo de preferências do APT não afeta " +"a escolha da instância." + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:56 +#, fuzzy +msgid "APT's Default Priority Assignments" +msgstr "Atribuições de Prioridade Padrão do APT" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:71 +#, fuzzy, no-wrap +msgid "<command>apt-get install -t testing <replaceable>some-package</replaceable></command>\n" +msgstr "" +"<programlisting>\n" +"<command>apt-get install -t testing <replaceable>algum-pacote</replaceable></command>\n" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:74 +#, fuzzy, no-wrap +msgid "APT::Default-Release \"stable\";\n" +msgstr "" +"<programlisting>\n" +"APT::Default-Release \"stable\";\n" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:58 +#, fuzzy +msgid "" +"If there is no preferences file or if there is no entry in the file that " +"applies to a particular version then the priority assigned to that version " +"is the priority of the distribution to which that version belongs. It is " +"possible to single out a distribution, \"the target release\", which " +"receives a higher priority than other distributions do by default. The " +"target release can be set on the <command>apt-get</command> command line or " +"in the APT configuration file <filename>/etc/apt/apt.conf</filename>. Note " +"that this has precedence over any general priority you set in the <filename>/" +"etc/apt/preferences</filename> file described later, but not over " +"specifically pinned packages. For example, <placeholder type=" +"\"programlisting\" id=\"0\"/> <placeholder type=\"programlisting\" id=\"1\"/>" +msgstr "" +"Caso não exista um arquivo de preferências ou caso não exista uma entrada no " +"arquivo que se aplique a uma instância em particular, a prioridade atribuída " +"a essa instância é a prioridade da distribuição para a qual a instância " +"pertence. É possível selecionar uma distribuição, conhecida como \"a versão " +"alvo\" (the target release), que recebe uma prioridade maior do que as " +"outras distribuições. A versão alvo pode ser definida na linha de comando do " +"<command>apt-get</command> ou no arquivo de configuração do APT <filename>/" +"etc/apt/apt.conf</filename>. Por exemplo," + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:83 +#, fuzzy +msgid "priority 100" +msgstr "prioridade 100" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:84 +#, fuzzy +msgid "to the version that is already installed (if any)." +msgstr "para a instância que já esteja instalada (caso exista)." + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:88 +#, fuzzy +msgid "priority 500" +msgstr "prioridade 500" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:89 +#, fuzzy +msgid "" +"to the versions that are not installed and do not belong to the target " +"release." +msgstr "" +"para as instâncias que não estã instaladas e que não pertencem a versão alvo." + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:93 +#, fuzzy +msgid "priority 990" +msgstr "prioridade 990" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:94 +#, fuzzy +msgid "" +"to the versions that are not installed and belong to the target release." +msgstr "" +"para as instâncias que não estejam instaladas e pertençam a versão alvo." + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:78 +#, fuzzy +msgid "" +"If the target release has been specified then APT uses the following " +"algorithm to set the priorities of the versions of a package. Assign: " +"<placeholder type=\"variablelist\" id=\"0\"/>" +msgstr "" +"Caso uma versão alvo tenha sido especificada o APT usará o seguinte " +"algoritmo para definir as prioridades das instâncias de um pacote. " +"Atribuirá :" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:99 +#, fuzzy +msgid "" +"If the target release has not been specified then APT simply assigns " +"priority 100 to all installed package versions and priority 500 to all " +"uninstalled package versions." +msgstr "" +"Caso nenhuma versão alvo tenha sido especificada, o APT simplesmente irá " +"atribuir a prioridade 100 para todas as instâncias de pacotes instaladas e a " +"prioridade 500 para todas as instâncias de pacotes não instaladas." + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:103 +#, fuzzy +msgid "" +"APT then applies the following rules, listed in order of precedence, to " +"determine which version of a package to install." +msgstr "" +"O APT aplica as regras a seguir, listadas em ordem de precedência, para " +"determinar qual instância de um pacote instalar." + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:106 +#, fuzzy +msgid "" +"Never downgrade unless the priority of an available version exceeds 1000. " +"(\"Downgrading\" is installing a less recent version of a package in place " +"of a more recent version. Note that none of APT's default priorities " +"exceeds 1000; such high priorities can only be set in the preferences file. " +"Note also that downgrading a package can be risky.)" +msgstr "" +"Nunca faz um downgrade a menos que a prioridade de uma instância disponível " +"exceda 1000. (Fazer um \"downgrade\" é instalar uma versão menos recente de " +"um pacote no lugar de uma versão mais recente. Note que nenhuma das " +"prioridades padrão do APT excede 1000; prioridades altas como essa podem ser " +"definidas somente no arquivo de preferências. Note também que fazer um " +"\"downgrade\" pode ser arriscado.)" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:112 +#, fuzzy +msgid "Install the highest priority version." +msgstr "Instala a instância de prioridade mais alta." + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:113 +#, fuzzy +msgid "" +"If two or more versions have the same priority, install the most recent one " +"(that is, the one with the higher version number)." +msgstr "" +"Caso duas ou mais instâncias possuam a mesma prioridade, instala a instância " +"mais recente (ou seja, aquela com o maior número de versão)." + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:116 +#, fuzzy +msgid "" +"If two or more versions have the same priority and version number but either " +"the packages differ in some of their metadata or the <literal>--reinstall</" +"literal> option is given, install the uninstalled one." +msgstr "" +"Caso duas ou mais instâncias possuam a mesma prioridade e número de versão " +"mas os pacotes sejam diferentes em alguns de seus metadados ou a opção " +"<literal>--reinstall</literal> seja fornecida, instala aquela desinstalada." + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:122 +#, fuzzy +msgid "" +"In a typical situation, the installed version of a package (priority 100) " +"is not as recent as one of the versions available from the sources listed in " +"the &sources-list; file (priority 500 or 990). Then the package will be " +"upgraded when <command>apt-get install <replaceable>some-package</" +"replaceable></command> or <command>apt-get upgrade</command> is executed." +msgstr "" +"Em uma situação típica, a instância instalada de um pacote (prioridade 100) " +"não é tão recente quanto uma das versões disponíveis nas fontes listadas no " +"arquivo &sources-list; (prioridade 500 ou 990). Então o pacote será " +"atualizado quando os comandos <command>apt-get install <replaceable>algum-" +"pacote</replaceable></command> ou <command>apt-get dist-upgrade</command> " +"forem executados." + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:129 +#, fuzzy +msgid "" +"More rarely, the installed version of a package is <emphasis>more</emphasis> " +"recent than any of the other available versions. The package will not be " +"downgraded when <command>apt-get install <replaceable>some-package</" +"replaceable></command> or <command>apt-get upgrade</command> is executed." +msgstr "" +"Mais raramente, a versão instalada de um pacote é <emphasis>mais</emphasis> " +"recente do que qualquer uma das outras versões disponíveis. O dowgrade do " +"pacote não será feito quando os comandos <command>apt-get install " +"<replaceable>algum-pacote</replaceable></command> ou <command>apt-get " +"upgrade</command> forem executados." + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:134 +#, fuzzy +msgid "" +"Sometimes the installed version of a package is more recent than the version " +"belonging to the target release, but not as recent as a version belonging to " +"some other distribution. Such a package will indeed be upgraded when " +"<command>apt-get install <replaceable>some-package</replaceable></command> " +"or <command>apt-get upgrade</command> is executed, because at least " +"<emphasis>one</emphasis> of the available versions has a higher priority " +"than the installed version." +msgstr "" +"Algumas vezes a versão instalada de um pacote é mais recente que a versão " +"que pertence a versão alvo, mas não tão recente quanto a versão que pertence " +"a alguma outra distribuição. Um pacote como esse será na verdade atualizado " +"quando os comandos <command>apt-get install <replaceable>algum-pacote</" +"replaceable></command> ou <command>apt-get upgrade</command> forem " +"executados, devido a pelo menos <emphasis>uma</emphasis> das versões " +"disponíveis possuir uma prioridade maior do que a versão instalada." + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:143 +#, fuzzy +msgid "The Effect of APT Preferences" +msgstr "O Efeito das Preferências do APT" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:145 +#, fuzzy +msgid "" +"The APT preferences file allows the system administrator to control the " +"assignment of priorities. The file consists of one or more multi-line " +"records separated by blank lines. Records can have one of two forms, a " +"specific form and a general form." +msgstr "" +"O arquivo de preferências do APT permite ao administrador do sistema " +"personalizar prioridades. O arquivo consiste de um ou mais registros de " +"múltiplas linhas separados por linhas em branco. Registros podem possuir uma " +"das duas formas, uma forma específica e uma forma geral." + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:151 +#, fuzzy +msgid "" +"The specific form assigns a priority (a \"Pin-Priority\") to one or more " +"specified packages and specified version or version range. For example, the " +"following record assigns a high priority to all versions of the " +"<filename>perl</filename> package whose version number begins with " +"\"<literal>5.8</literal>\". Multiple packages can be separated by spaces." +msgstr "" +"A forma específica atribui uma uma prioridade (uma \"Pin-Priority\") para um " +"pacote e versão ou faixa de versão especificados. Por exemplo, o registro a " +"seguir atribui uma prioridade alta para todas as versões do pacote " +"<filename>perl</filename> os quais tenham seus números de versão iniciando " +"com \"<literal>5.8</literal>\"." + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting> +#: apt_preferences.5.xml:158 +#, fuzzy, no-wrap +msgid "" +"Package: perl\n" +"Pin: version 5.8*\n" +"Pin-Priority: 1001\n" +msgstr "" +"<programlisting>\n" +"Package: perl\n" +"Pin: version 5.8*\n" +"Pin-Priority: 1001\n" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:164 +#, fuzzy +msgid "" +"The general form assigns a priority to all of the package versions in a " +"given distribution (that is, to all the versions of packages that are listed " +"in a certain <filename>Release</filename> file) or to all of the package " +"versions coming from a particular Internet site, as identified by the site's " +"fully qualified domain name." +msgstr "" +"O forma geral atribui uma prioridade para todas as versões de pacotes em uma " +"dada distribuição (isto é, para toda as versões de pacotes que estejam em um " +"certo arquivo <filename>Release</filename>) ou para todas as versões de " +"pacotes que provenientes de um site Internet em particular, como " +"identificado pelo nome de domínio totalmente qualificado do site Internet." + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:170 +#, fuzzy +msgid "" +"This general-form entry in the APT preferences file applies only to groups " +"of packages. For example, the following record assigns a high priority to " +"all package versions available from the local site." +msgstr "" +"Essa entrada de forma geral no arquivo de preferências do APT aplica-se " +"somente a grupos de pacotes. Por exemplo, o registro a seguir faz com que o " +"APT atribua uma prioridade alta para todas as versões de pacotes disponíveis " +"no site local." + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting> +#: apt_preferences.5.xml:175 +#, fuzzy, no-wrap +msgid "" +"Package: *\n" +"Pin: origin \"\"\n" +"Pin-Priority: 999\n" +msgstr "" +"<programlisting>\n" +"Package: *\n" +"Pin: origin \"\"\n" +"Pin-Priority: 999\n" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:180 +#, fuzzy +msgid "" +"A note of caution: the keyword used here is \"<literal>origin</literal>\". " +"This should not be confused with the Origin of a distribution as specified " +"in a <filename>Release</filename> file. What follows the \"Origin:\" tag in " +"a <filename>Release</filename> file is not an Internet address but an author " +"or vendor name, such as \"Debian\" or \"Ximian\"." +msgstr "" +"Uma nota de aviso : a palavra-chave usada aqui é \"<literal>origin</literal>" +"\". Esta palavra não deve ser confundida com a origem (\"Origin:\") de uma " +"distribuição como especificado em um arquivo <filename>Release</filename>. O " +"que segue a tag \"Origin:\" em um arquivo <filename>Release</filename> não é " +"um endereço de site Internet mas sim nome de autor ou distribuidor (vendor), " +"como \"Debian\" ou \"Ximian\"." + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:186 +#, fuzzy +msgid "" +"The following record assigns a low priority to all package versions " +"belonging to any distribution whose Archive name is \"<literal>unstable</" +"literal>\"." +msgstr "" +"O registro a seguir atribui uma prioridade baixa para todas as versões de " +"pacote que pertençam a qualquer distribuição cujo nome do Repositório seja " +"\"<literal>unstable</literal>\"." + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting> +#: apt_preferences.5.xml:190 +#, fuzzy, no-wrap +msgid "" +"Package: *\n" +"Pin: release a=unstable\n" +"Pin-Priority: 50\n" +msgstr "" +"<programlisting>\n" +"Package: *\n" +"Pin: release a=unstable\n" +"Pin-Priority: 50\n" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:195 +#, fuzzy +msgid "" +"The following record assigns a high priority to all package versions " +"belonging to any distribution whose Codename is \"<literal>squeeze</literal>" +"\"." +msgstr "" +"O registro a seguir atribui uma prioridade baixa para todas as versões de " +"pacote que pertençam a qualquer distribuição cujo nome do Repositório seja " +"\"<literal>unstable</literal>\"." + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting> +#: apt_preferences.5.xml:199 +#, fuzzy, no-wrap +msgid "" +"Package: *\n" +"Pin: release n=squeeze\n" +"Pin-Priority: 900\n" +msgstr "" +"<programlisting>\n" +"Package: *\n" +"Pin: release a=unstable\n" +"Pin-Priority: 50\n" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:204 +#, fuzzy +msgid "" +"The following record assigns a high priority to all package versions " +"belonging to any release whose Archive name is \"<literal>stable</literal>\" " +"and whose release Version number is \"<literal>3.0</literal>\"." +msgstr "" +"O registro a seguir atribui uma prioridade alta para todas as versões de " +"pacotes que pertençam a qualquer versão cujo nome do Repositório seja " +"\"<literal>stable</literal>\" e cujo número de versão seja \"<literal>3.0</" +"literal>\"." + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting> +#: apt_preferences.5.xml:209 +#, fuzzy, no-wrap +msgid "" +"Package: *\n" +"Pin: release a=stable, v=3.0\n" +"Pin-Priority: 500\n" +msgstr "" +"<programlisting>\n" +"Package: *\n" +"Pin: release a=unstable, v=3.0\n" +"Pin-Priority: 50\n" + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:220 +#, fuzzy +msgid "How APT Interprets Priorities" +msgstr "Como o APT Interpreta Prioridades" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:228 +#, fuzzy +msgid "P > 1000" +msgstr "P > 1000" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:229 +#, fuzzy +msgid "" +"causes a version to be installed even if this constitutes a downgrade of the " +"package" +msgstr "" +"faz com que uma instância seja instalada mesmo caso isso constitua um " +"dowgrade do pacote" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:233 +#, fuzzy +msgid "990 < P <=1000" +msgstr "990 < P <=1000" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:234 +#, fuzzy +msgid "" +"causes a version to be installed even if it does not come from the target " +"release, unless the installed version is more recent" +msgstr "" +"faz com que uma versão seja instalada mesmo caso a mesma não venha de uma " +"versão alvo, a menos que a versão instalada seja mais recente" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:239 +#, fuzzy +msgid "500 < P <=990" +msgstr "500 < P <=990" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:240 +#, fuzzy +msgid "" +"causes a version to be installed unless there is a version available " +"belonging to the target release or the installed version is more recent" +msgstr "" +"faz com que uma versão seja instalada a menos que exista uma versão " +"disponível pertencente a versão alvo ou a versão instalada seja mais recente" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:245 +#, fuzzy +msgid "100 < P <=500" +msgstr "100 < P <=500" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:246 +#, fuzzy +msgid "" +"causes a version to be installed unless there is a version available " +"belonging to some other distribution or the installed version is more recent" +msgstr "" +"faz com que uma versão seja instalada a menos que exista uma versão " +"disponível pertencente a alguma outra distribuição ou a versão instalada " +"seja mais recente" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:251 +#, fuzzy +msgid "0 < P <=100" +msgstr "0 <= P <=100" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:252 +#, fuzzy +msgid "" +"causes a version to be installed only if there is no installed version of " +"the package" +msgstr "" +"faz com que uma versão seja instalada somente caso não exista uma versão " +"instalada do pacote" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:256 +#, fuzzy +msgid "P < 0" +msgstr "P < 0" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:257 +#, fuzzy +msgid "prevents the version from being installed" +msgstr "impede a versão de ser instalada" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:223 +#, fuzzy +msgid "" +"Priorities (P) assigned in the APT preferences file must be positive or " +"negative integers. They are interpreted as follows (roughly speaking): " +"<placeholder type=\"variablelist\" id=\"0\"/>" +msgstr "" +"Prioridades (P) atribuídas no arquivo de preferências do APT devem ser " +"números inteiros positivos ou negativos. Eles são interpretados como a " +"seguir (a grosso modo):" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:262 +#, fuzzy +msgid "" +"If any specific-form records match an available package version then the " +"first such record determines the priority of the package version. Failing " +"that, if any general-form records match an available package version then " +"the first such record determines the priority of the package version." +msgstr "" +"Caso um dos registro de forma específica descritos acima case (match) com " +"uma versão disponível do pacote então o primeiro desses registros " +"encontrados determinará a prioridade da versão do pacote. Na falha desse " +"cenário, caso quaisquer registros de forma genérica casem (match) com uma " +"versão do pacote disponível então o primeiro desses registros encontrado " +"determinará a prioridade da versão do pacote." + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:268 +#, fuzzy +msgid "" +"For example, suppose the APT preferences file contains the three records " +"presented earlier:" +msgstr "" +"Por exemplo, suponha que o arquivo de preferências do APT contenha os três " +"registros apresentados anteriormente :" + +#. type: Content of: <refentry><refsect1><refsect2><programlisting> +#: apt_preferences.5.xml:272 +#, fuzzy, no-wrap +msgid "" +"Package: perl\n" +"Pin: version 5.8*\n" +"Pin-Priority: 1001\n" +"\n" +"Package: *\n" +"Pin: origin \"\"\n" +"Pin-Priority: 999\n" +"\n" +"Package: *\n" +"Pin: release unstable\n" +"Pin-Priority: 50\n" +msgstr "" +"<programlisting>\n" +"Package: perl\n" +"Pin: version 5.8*\n" +"Pin-Priority: 1001\n" +"\n" +"Package: *\n" +"Pin: origin \"\"\n" +"Pin-Priority: 999\n" +"\n" +"Package: *\n" +"Pin: release unstable\n" +"Pin-Priority: 50\n" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:285 +msgid "Then:" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:287 +#, fuzzy +msgid "" +"The most recent available version of the <literal>perl</literal> package " +"will be installed, so long as that version's version number begins with " +"\"<literal>5.8</literal>\". If <emphasis>any</emphasis> 5.8* version of " +"<literal>perl</literal> is available and the installed version is 5.9*, then " +"<literal>perl</literal> will be downgraded." +msgstr "" +"A versão mais recente disponível do pacote <literal>perl</literal> será " +"instalado, contanto que esse número de versão da versão inicie com " +"\"<literal>5.8</literal>\". Caso <emphasis>qualquer</emphasis> versão 5.8* " +"de <literal>perl</literal> esteja disponível e a versão instalada seja 5.9*, " +"será feito um downgrade do <literal>perl</literal>." + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:292 +#, fuzzy +msgid "" +"A version of any package other than <literal>perl</literal> that is " +"available from the local system has priority over other versions, even " +"versions belonging to the target release." +msgstr "" +"Uma versão de qualquer pacote diferente de <literal>perl</literal> que " +"esteja disponível no sistema local possui prioridade sobre outras versões, " +"mesmo versões pertencentes a versão alvo." + +#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> +#: apt_preferences.5.xml:296 +#, fuzzy +msgid "" +"A version of a package whose origin is not the local system but some other " +"site listed in &sources-list; and which belongs to an <literal>unstable</" +"literal> distribution is only installed if it is selected for installation " +"and no version of the package is already installed." +msgstr "" +"Uma versão de um pacote cuja origem não seja o sistema local mas sim algum " +"outro site listado no arquivo &sources-list; e que pertença a uma " +"distribuição <literal>unstable</literal> é instalada somente caso a mesma " +"seja selecionada para instalação e nenhuma versão do pacote já esteja " +"instalada." + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:306 +#, fuzzy +msgid "Determination of Package Version and Distribution Properties" +msgstr "Determinação da Versão do Pacote e Propriedades da Distribuição" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:308 +#, fuzzy +msgid "" +"The locations listed in the &sources-list; file should provide " +"<filename>Packages</filename> and <filename>Release</filename> files to " +"describe the packages available at that location." +msgstr "" +"As localidades listadas em um arquivo &sources-list; devem fornecer arquivos " +"<filename>Packages</filename> e <filename>Release</filename> para descrever " +"os pacotes disponíveis nessas localidades." + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:320 +#, fuzzy +msgid "the <literal>Package:</literal> line" +msgstr "a linha <literal>Package:</literal>" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:321 +#, fuzzy +msgid "gives the package name" +msgstr "informa o nome do pacote" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:324 apt_preferences.5.xml:374 +#, fuzzy +msgid "the <literal>Version:</literal> line" +msgstr "a linha <literal>Version:</literal>" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:325 +#, fuzzy +msgid "gives the version number for the named package" +msgstr "informa o número de versão do pacote" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:312 +#, fuzzy +msgid "" +"The <filename>Packages</filename> file is normally found in the directory " +"<filename>.../dists/<replaceable>dist-name</replaceable>/" +"<replaceable>component</replaceable>/<replaceable>arch</replaceable></" +"filename>: for example, <filename>.../dists/stable/main/binary-i386/" +"Packages</filename>. It consists of a series of multi-line records, one for " +"each package available in that directory. Only two lines in each record are " +"relevant for setting APT priorities: <placeholder type=\"variablelist\" id=" +"\"0\"/>" +msgstr "" +"O arquivo <filename>Packages</filename> é normalmente encontrado no " +"diretório <filename>.../dists/<replaceable>nome-distribuição</replaceable>/" +"<replaceable>componente</replaceable>/<replaceable>arquitetura</" +"replaceable></filename> : por exemplo, <filename>.../dists/stable/main/" +"binary-i386/Packages</filename>. O arquivo consiste de uma série de " +"registros de múltiplas linhas, uma para cada pacote disponível no diretório. " +"Somente duas linhas em cada registro são relevantes para definir prioridades " +"do APT :" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:341 +#, fuzzy +msgid "the <literal>Archive:</literal> or <literal>Suite:</literal> line" +msgstr "a linha <literal>Archive:</literal>" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:342 +#, fuzzy +msgid "" +"names the archive to which all the packages in the directory tree belong. " +"For example, the line \"Archive: stable\" or \"Suite: stable\" specifies " +"that all of the packages in the directory tree below the parent of the " +"<filename>Release</filename> file are in a <literal>stable</literal> " +"archive. Specifying this value in the APT preferences file would require " +"the line:" +msgstr "" +"dá nome ao repositório para o qual todos os pacotes na àrvore de diretório " +"pertencem. Por exemplo, a linha \"Archive: stable\" especifica que todos os " +"pacotes na àrvore de diretório abaixo do diretório pai do arquivo " +"<filename>Release</filename> estão no respositório <literal>stable</" +"literal>. Especificar esse valor no arquivo de preferências do APT iria " +"requerer a linha :" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting> +#: apt_preferences.5.xml:352 +#, fuzzy, no-wrap +msgid "Pin: release a=stable\n" +msgstr "" +"<programlisting>\n" +"Pin: release a=stable\n" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:358 +#, fuzzy +msgid "the <literal>Codename:</literal> line" +msgstr "a linha <literal>Component:</literal>" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:359 +#, fuzzy +msgid "" +"names the codename to which all the packages in the directory tree belong. " +"For example, the line \"Codename: squeeze\" specifies that all of the " +"packages in the directory tree below the parent of the <filename>Release</" +"filename> file belong to a version named <literal>squeeze</literal>. " +"Specifying this value in the APT preferences file would require the line:" +msgstr "" +"dá nome ao repositório para o qual todos os pacotes na àrvore de diretório " +"pertencem. Por exemplo, a linha \"Archive: stable\" especifica que todos os " +"pacotes na àrvore de diretório abaixo do diretório pai do arquivo " +"<filename>Release</filename> estão no respositório <literal>stable</" +"literal>. Especificar esse valor no arquivo de preferências do APT iria " +"requerer a linha :" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting> +#: apt_preferences.5.xml:368 +#, no-wrap +msgid "Pin: release n=squeeze\n" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:375 +#, fuzzy +msgid "" +"names the release version. For example, the packages in the tree might " +"belong to Debian GNU/Linux release version 3.0. Note that there is normally " +"no version number for the <literal>testing</literal> and <literal>unstable</" +"literal> distributions because they have not been released yet. Specifying " +"this in the APT preferences file would require one of the following lines." +msgstr "" +"dá nome a versão da distribuição. Por exemplo, os pacote na àrvore podem " +"pertencer a distribuição Debian GNU/Linux versão 3.0. Note que normalmente " +"não existe número de versão para as distribuições <literal>testing</literal> " +"e <literal>unstable</literal> devido as mesmas não terem sido lançadas " +"ainda. Especificar isso no arquivo de preferências do APT iria requerer uma " +"das linhas a seguir." + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting> +#: apt_preferences.5.xml:384 +#, fuzzy, no-wrap +msgid "" +"Pin: release v=3.0\n" +"Pin: release a=stable, v=3.0\n" +"Pin: release 3.0\n" +msgstr "" +"<programlisting>\n" +"Pin: release v=3.0\n" +"Pin: release a=stable v=3.0\n" +"Pin: release 3.0\n" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:393 +#, fuzzy +msgid "the <literal>Component:</literal> line" +msgstr "a linha <literal>Component:</literal>" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:394 +#, fuzzy +msgid "" +"names the licensing component associated with the packages in the directory " +"tree of the <filename>Release</filename> file. For example, the line " +"\"Component: main\" specifies that all the packages in the directory tree " +"are from the <literal>main</literal> component, which entails that they are " +"licensed under terms listed in the Debian Free Software Guidelines. " +"Specifying this component in the APT preferences file would require the line:" +msgstr "" +"dá nome ao componente de licenciamento associado com os pacotes na àrvore de " +"diretório do arquivo <filename>Release</filename>. Por exemplo, a linha " +"\"Component: main\" especifica que todos os pacotes na àrvore de diretório " +"são do componente <literal>main</literal>, o que significa que as mesmas " +"estão licenciadas sob os termos da Linhas Guias Debian para o Software Livre " +"(a DFSG). Especificar esse componente no arquivo de preferências do APT iria " +"requerer a linha :" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting> +#: apt_preferences.5.xml:403 +#, fuzzy, no-wrap +msgid "Pin: release c=main\n" +msgstr "" +"<programlisting>\n" +"Pin: release c=main\n" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:409 +#, fuzzy +msgid "the <literal>Origin:</literal> line" +msgstr "a linha <literal>Origin:</literal>" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:410 +#, fuzzy +msgid "" +"names the originator of the packages in the directory tree of the " +"<filename>Release</filename> file. Most commonly, this is <literal>Debian</" +"literal>. Specifying this origin in the APT preferences file would require " +"the line:" +msgstr "" +"dá nome ao produtor dos pacotes na àrvore de diretório do arquivo " +"<filename>Release</filename>. O mais comum é esse valor ser <literal>Debian</" +"literal>. Especificar essa origem no arquivo de preferências do APT iria " +"requerer a linha :" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting> +#: apt_preferences.5.xml:416 +#, fuzzy, no-wrap +msgid "Pin: release o=Debian\n" +msgstr "" +"<programlisting>\n" +"Pin: release o=Debian\n" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> +#: apt_preferences.5.xml:422 +#, fuzzy +msgid "the <literal>Label:</literal> line" +msgstr "a linha <literal>Label:</literal>" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> +#: apt_preferences.5.xml:423 +#, fuzzy +msgid "" +"names the label of the packages in the directory tree of the " +"<filename>Release</filename> file. Most commonly, this is <literal>Debian</" +"literal>. Specifying this label in the APT preferences file would require " +"the line:" +msgstr "" +"dá nome ao rótulo (label) dos pacotes na árvore de diretório. O mais comum é " +"esse valor ser <literal>Debian</literal>. Especificar esse rótulo (label) no " +"arquivo de preferências do APT iria requerer a linha :" + +#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting> +#: apt_preferences.5.xml:429 +#, fuzzy, no-wrap +msgid "Pin: release l=Debian\n" +msgstr "" +"<programlisting>\n" +"Pin: release l=Debian\n" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:330 +#, fuzzy +msgid "" +"The <filename>Release</filename> file is normally found in the directory " +"<filename>.../dists/<replaceable>dist-name</replaceable></filename>: for " +"example, <filename>.../dists/stable/Release</filename>, or <filename>.../" +"dists/woody/Release</filename>. It consists of a single multi-line record " +"which applies to <emphasis>all</emphasis> of the packages in the directory " +"tree below its parent. Unlike the <filename>Packages</filename> file, " +"nearly all of the lines in a <filename>Release</filename> file are relevant " +"for setting APT priorities: <placeholder type=\"variablelist\" id=\"0\"/>" +msgstr "" +"O arquivo <filename>Release</filename> é normalmente encontrado no diretório " +"<filename>.../dists/<replaceable>nome-distribuição</replaceable></" +"filename> : por exemplo, <filename>.../dists/stable/Release</filename>, ou " +"<filename>.../dists/woody/Release</filename>. O arquivo consiste de um " +"registro de múltiplas linhas o qual se aplica a <emphasis>todos</emphasis> " +"os pacotes na àrvore de diretórios abaixo de seu diretório pai. Diferente do " +"arquivo <filename>Packages</filename>, quase todas as linhas em um arquivo " +"<filename>Release</filename> são relevantes para a definição de prioridades " +"do APT :" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:436 +#, fuzzy +msgid "" +"All of the <filename>Packages</filename> and <filename>Release</filename> " +"files retrieved from locations listed in the &sources-list; file are stored " +"in the directory <filename>/var/lib/apt/lists</filename>, or in the file " +"named by the variable <literal>Dir::State::Lists</literal> in the " +"<filename>apt.conf</filename> file. For example, the file <filename>debian." +"lcs.mit.edu_debian_dists_unstable_contrib_binary-i386_Release</filename> " +"contains the <filename>Release</filename> file retrieved from the site " +"<literal>debian.lcs.mit.edu</literal> for <literal>binary-i386</literal> " +"architecture files from the <literal>contrib</literal> component of the " +"<literal>unstable</literal> distribution." +msgstr "" +"Todos os arquivos <filename>Packages</filename> e <filename>Release</" +"filename> obtidos das localidades listadas no arquivo &sources-list; são " +"mantidos no diretório <filename>/var/lib/apt/lists</filename> ou no arquivo " +"indicado pela variável <literal>Dir::State::Lists</literal> no arquivo " +"<filename>apt.conf</filename>. Por exemplo, o arquivo <filename>debian.lcs." +"mit.edu_debian_dists_unstable_contrib_binary-i386_Release</filename> contém " +"o arquivo <filename>Release</filename> obtido do site <literal>debian.lcs." +"mit.edu</literal> para a arquitetura <literal>binary-i386</literal>, " +"arquivos do componente <literal>contrib</literal> da distribuição " +"<literal>unstable</literal>." + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:449 +#, fuzzy +msgid "Optional Lines in an APT Preferences Record" +msgstr "Linhas Opcionais em um Registro de Preferências do APT" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:451 +#, fuzzy +msgid "" +"Each record in the APT preferences file can optionally begin with one or " +"more lines beginning with the word <literal>Explanation:</literal>. This " +"provides a place for comments." +msgstr "" +"Cada registro em um arquivo de preferências do APT pode opcionalmente " +"iniciar com uma ou mais linhas iniciadas com a palavra <literal>Explanation:" +"</literal>. Isto oferece um local para inserir comentários." + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:455 +#, fuzzy +msgid "" +"The <literal>Pin-Priority:</literal> line in each APT preferences record is " +"optional. If omitted, APT assigns a priority of 1 less than the last value " +"specified on a line beginning with <literal>Pin-Priority: release ...</" +"literal>." +msgstr "" +"A linha <literal>Pin-Priority:</literal> em cada registro de preferências do " +"APT é opcional. Caso omitida, o APT atribuirá uma prioridade de 1 menos o " +"último valor especificado em uma linha iniciando com <literal>Pin-Priority: " +"release ...</literal>." + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:464 +#, fuzzy +msgid "Tracking Stable" +msgstr "Acompanhando a Stable" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:472 +#, fuzzy, no-wrap +msgid "" +"Explanation: Uninstall or do not install any Debian-originated\n" +"Explanation: package versions other than those in the stable distro\n" +"Package: *\n" +"Pin: release a=stable\n" +"Pin-Priority: 900\n" +"\n" +"Package: *\n" +"Pin: release o=Debian\n" +"Pin-Priority: -10\n" +msgstr "" +"<programlisting>\n" +"Explanation: Desinstala ou não instala nenhuma versão de pacote originada\n" +"Explanation: do Debian a não ser aquelas na distribuição stable\n" +"Package: *\n" +"Pin: release a=stable\n" +"Pin-Priority: 900\n" +"\n" +"Package: *\n" +"Pin: release o=Debian\n" +"Pin-Priority: -10\n" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:466 +#, fuzzy +msgid "" +"The following APT preferences file will cause APT to assign a priority " +"higher than the default (500) to all package versions belonging to a " +"<literal>stable</literal> distribution and a prohibitively low priority to " +"package versions belonging to other <literal>Debian</literal> " +"distributions. <placeholder type=\"programlisting\" id=\"0\"/>" +msgstr "" +"O arquivo de preferências do APT a seguir fará com que o APT atribua uma " +"prioridade maior do que a prioridade padrão (500) para todas as versões de " +"pacotes pertencentes a distribuição <literal>stable</literal> e uma " +"prioridade proibitivamente baixa para versões de pacotes pertencentes a " +"outras distribuições <literal>Debian</literal>." + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:489 apt_preferences.5.xml:535 +#: apt_preferences.5.xml:593 +#, fuzzy, no-wrap +msgid "" +"apt-get install <replaceable>package-name</replaceable>\n" +"apt-get upgrade\n" +"apt-get dist-upgrade\n" +msgstr "" +"<programlisting>\n" +"apt-get install <replaceable>nome-pacote</replaceable>\n" +"apt-get upgrade\n" +"apt-get dist-upgrade\n" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:484 +#, fuzzy +msgid "" +"With a suitable &sources-list; file and the above preferences file, any of " +"the following commands will cause APT to upgrade to the latest " +"<literal>stable</literal> version(s). <placeholder type=\"programlisting\" " +"id=\"0\"/>" +msgstr "" +"Com um arquivo &sources-list; apropriado e o arquivo de preferências acima, " +"quaisquer um dos comandos a seguir farão com que o APT atualize para a(s) " +"ulítma(s) versão(ôes) <literal>stable</literal>." + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:501 +#, fuzzy, no-wrap +msgid "apt-get install <replaceable>package</replaceable>/testing\n" +msgstr "" +"<programlisting>\n" +"apt-get install <replaceable>pacote</replaceable>/testing\n" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:495 +#, fuzzy +msgid "" +"The following command will cause APT to upgrade the specified package to the " +"latest version from the <literal>testing</literal> distribution; the package " +"will not be upgraded again unless this command is given again. <placeholder " +"type=\"programlisting\" id=\"0\"/>" +msgstr "" +"O comando a seguir fará com que o APT atualize o pacote especificado para a " +"última versão da distribuição <literal>testing</literal>; o pacote não serpa " +"atualizado novamente a menos que esse comando seja executado novamente." + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:507 +#, fuzzy +msgid "Tracking Testing or Unstable" +msgstr "Acompanhando a Testing" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:516 +#, fuzzy, no-wrap +msgid "" +"Package: *\n" +"Pin: release a=testing\n" +"Pin-Priority: 900\n" +"\n" +"Package: *\n" +"Pin: release a=unstable\n" +"Pin-Priority: 800\n" +"\n" +"Package: *\n" +"Pin: release o=Debian\n" +"Pin-Priority: -10\n" +msgstr "" +"<programlisting>\n" +"Package: *\n" +"Pin: release a=testing\n" +"Pin-Priority: 900\n" +"\n" +"Package: *\n" +"Pin: release a=unstable\n" +"Pin-Priority: 800\n" +"\n" +"Package: *\n" +"Pin: release o=Debian\n" +"Pin-Priority: -10\n" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:509 +#, fuzzy +msgid "" +"The following APT preferences file will cause APT to assign a high priority " +"to package versions from the <literal>testing</literal> distribution, a " +"lower priority to package versions from the <literal>unstable</literal> " +"distribution, and a prohibitively low priority to package versions from " +"other <literal>Debian</literal> distributions. <placeholder type=" +"\"programlisting\" id=\"0\"/>" +msgstr "" +"O arquivo de preferências do APT a seguir fará com que o APT atribua uma " +"prioridade maior para versões de pacote da distribuição <literal>testing</" +"literal>, uma prioridade menor para versões de pacotes da distribuição " +"<literal>unstable</literal> e uma prioridade proibitivamente baixa para " +"versões de pacotes de outras distribuições <literal>Debian</literal>." + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:530 +#, fuzzy +msgid "" +"With a suitable &sources-list; file and the above preferences file, any of " +"the following commands will cause APT to upgrade to the latest " +"<literal>testing</literal> version(s). <placeholder type=\"programlisting\" " +"id=\"0\"/>" +msgstr "" +"Com um arquivo &sources-list; adequado e o arquivo de preferências do APT " +"acima, quaisquer dos comandos a seguir farão com que o APT atualize para a" +"(s) última(s) versão(ões) <literal>testing</literal>." + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:550 +#, fuzzy, no-wrap +msgid "apt-get install <replaceable>package</replaceable>/unstable\n" +msgstr "" +"<programlisting>\n" +"apt-get install <replaceable>pacote</replaceable>/unstable\n" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:541 +#, fuzzy +msgid "" +"The following command will cause APT to upgrade the specified package to the " +"latest version from the <literal>unstable</literal> distribution. " +"Thereafter, <command>apt-get upgrade</command> will upgrade the package to " +"the most recent <literal>testing</literal> version if that is more recent " +"than the installed version, otherwise, to the most recent <literal>unstable</" +"literal> version if that is more recent than the installed version. " +"<placeholder type=\"programlisting\" id=\"0\"/>" +msgstr "" +"O comando a seguir fará com que o APT atualize o pacote especificado para a " +"última versão da distribuição <literal>unstable</literal>. Assim, o comando " +"<command>apt-get upgrade</command> irá atualizar o pacote para a versão " +"<literal>testing</literal> mais recente caso essa versão seja mais recente " +"que a versão instalada, caso não seja, o pacote será atualizado para a " +"versão <literal>unstable</literal> mais recente caso a mesma seja mais " +"recente que a versão instalada." + +#. type: Content of: <refentry><refsect1><refsect2><title> +#: apt_preferences.5.xml:557 +msgid "Tracking the evolution of a codename release" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:571 +#, fuzzy, no-wrap +msgid "" +"Explanation: Uninstall or do not install any Debian-originated package versions\n" +"Explanation: other than those in the distribution codenamed with squeeze or sid\n" +"Package: *\n" +"Pin: release n=squeeze\n" +"Pin-Priority: 900\n" +"\n" +"Explanation: Debian unstable is always codenamed with sid\n" +"Package: *\n" +"Pin: release a=sid\n" +"Pin-Priority: 800\n" +"\n" +"Package: *\n" +"Pin: release o=Debian\n" +"Pin-Priority: -10\n" +msgstr "" +"<programlisting>\n" +"Explanation: Desinstala ou não instala nenhuma versão de pacote originada\n" +"Explanation: do Debian a não ser aquelas na distribuição stable\n" +"Package: *\n" +"Pin: release a=stable\n" +"Pin-Priority: 900\n" +"\n" +"Package: *\n" +"Pin: release o=Debian\n" +"Pin-Priority: -10\n" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:559 +msgid "" +"The following APT preferences file will cause APT to assign a priority " +"higher than the default (500) to all package versions belonging to a " +"specified codename of a distribution and a prohibitively low priority to " +"package versions belonging to other <literal>Debian</literal> distributions, " +"codenames and archives. Note that with this APT preference APT will follow " +"the migration of a release from the archive <literal>testing</literal> to " +"<literal>stable</literal> and later <literal>oldstable</literal>. If you " +"want to follow for example the progress in <literal>testing</literal> " +"notwithstanding the codename changes you should use the example " +"configurations above. <placeholder type=\"programlisting\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:588 +#, fuzzy +msgid "" +"With a suitable &sources-list; file and the above preferences file, any of " +"the following commands will cause APT to upgrade to the latest version(s) in " +"the release codenamed with <literal>squeeze</literal>. <placeholder type=" +"\"programlisting\" id=\"0\"/>" +msgstr "" +"Com um arquivo &sources-list; apropriado e o arquivo de preferências acima, " +"quaisquer um dos comandos a seguir farão com que o APT atualize para a(s) " +"ulítma(s) versão(ôes) <literal>stable</literal>." + +#. type: Content of: <refentry><refsect1><refsect2><para><programlisting> +#: apt_preferences.5.xml:608 +#, fuzzy, no-wrap +msgid "apt-get install <replaceable>package</replaceable>/sid\n" +msgstr "" +"<programlisting>\n" +"apt-get install <replaceable>pacote</replaceable>/testing\n" + +#. type: Content of: <refentry><refsect1><refsect2><para> +#: apt_preferences.5.xml:599 +#, fuzzy +msgid "" +"The following command will cause APT to upgrade the specified package to the " +"latest version from the <literal>sid</literal> distribution. Thereafter, " +"<command>apt-get upgrade</command> will upgrade the package to the most " +"recent <literal>squeeze</literal> version if that is more recent than the " +"installed version, otherwise, to the most recent <literal>sid</literal> " +"version if that is more recent than the installed version. <placeholder " +"type=\"programlisting\" id=\"0\"/>" +msgstr "" +"O comando a seguir fará com que o APT atualize o pacote especificado para a " +"última versão da distribuição <literal>unstable</literal>. Assim, o comando " +"<command>apt-get upgrade</command> irá atualizar o pacote para a versão " +"<literal>testing</literal> mais recente caso essa versão seja mais recente " +"que a versão instalada, caso não seja, o pacote será atualizado para a " +"versão <literal>unstable</literal> mais recente caso a mesma seja mais " +"recente que a versão instalada." + +#. type: Content of: <refentry><refsect1><variablelist> +#: apt_preferences.5.xml:617 +#, fuzzy +msgid "&file-preferences;" +msgstr "apt_preferences" + +#. type: Content of: <refentry><refsect1><para> +#: apt_preferences.5.xml:623 +#, fuzzy +msgid "&apt-get; &apt-cache; &apt-conf; &sources-list;" +msgstr "&apt-get; &apt-cache; &apt-conf; &sources-list;" + +#. type: Content of: <refentry><refnamediv><refname> +#: sources.list.5.xml:22 sources.list.5.xml:29 +msgid "sources.list" +msgstr "" + +#. type: Content of: <refentry><refnamediv><refpurpose> +#: sources.list.5.xml:30 +msgid "Package resource list for APT" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:34 +msgid "" +"The package resource list is used to locate archives of the package " +"distribution system in use on the system. At this time, this manual page " +"documents only the packaging system used by the Debian GNU/Linux system. " +"This control file is <filename>/etc/apt/sources.list</filename>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:39 +msgid "" +"The source list is designed to support any number of active sources and a " +"variety of source media. The file lists one source per line, with the most " +"preferred source listed first. The format of each line is: <literal>type uri " +"args</literal> The first item, <literal>type</literal> determines the format " +"for <literal>args</literal>. <literal>uri</literal> is a Universal Resource " +"Identifier (URI), which is a superset of the more specific and well-known " +"Universal Resource Locator, or URL. The rest of the line can be marked as a " +"comment by using a #." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: sources.list.5.xml:50 +msgid "sources.list.d" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:51 +msgid "" +"The <filename>/etc/apt/sources.list.d</filename> directory provides a way to " +"add sources.list entries in separate files. The format is the same as for " +"the regular <filename>sources.list</filename> file. File names need to end " +"with <filename>.list</filename> and may only contain letters (a-z and A-Z), " +"digits (0-9), underscore (_), hyphen (-) and period (.) characters. " +"Otherwise they will be silently ignored." +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: sources.list.5.xml:60 +msgid "The deb and deb-src types" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:61 +msgid "" +"The <literal>deb</literal> type describes a typical two-level Debian " +"archive, <filename>distribution/component</filename>. Typically, " +"<literal>distribution</literal> is generally one of <literal>stable</" +"literal> <literal>unstable</literal> or <literal>testing</literal> while " +"component is one of <literal>main</literal> <literal>contrib</literal> " +"<literal>non-free</literal> or <literal>non-us</literal>. The <literal>deb-" +"src</literal> type describes a debian distribution's source code in the same " +"form as the <literal>deb</literal> type. A <literal>deb-src</literal> line " +"is required to fetch source indexes." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:73 +msgid "" +"The format for a <filename>sources.list</filename> entry using the " +"<literal>deb</literal> and <literal>deb-src</literal> types is:" +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:76 +#, no-wrap +msgid "deb uri distribution [component1] [component2] [...]" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:78 +msgid "" +"The URI for the <literal>deb</literal> type must specify the base of the " +"Debian distribution, from which APT will find the information it needs. " +"<literal>distribution</literal> can specify an exact path, in which case the " +"components must be omitted and <literal>distribution</literal> must end with " +"a slash (/). This is useful for when the case only a particular sub-section " +"of the archive denoted by the URI is of interest. If <literal>distribution</" +"literal> does not specify an exact path, at least one <literal>component</" +"literal> must be present." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:87 +msgid "" +"<literal>distribution</literal> may also contain a variable, <literal>$(ARCH)" +"</literal> which expands to the Debian architecture (i386, m68k, " +"powerpc, ...) used on the system. This permits architecture-independent " +"<filename>sources.list</filename> files to be used. In general this is only " +"of interest when specifying an exact path, <literal>APT</literal> will " +"automatically generate a URI with the current architecture otherwise." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:95 +msgid "" +"Since only one distribution can be specified per line it may be necessary to " +"have multiple lines for the same URI, if a subset of all available " +"distributions or components at that location is desired. APT will sort the " +"URI list after it has generated a complete set internally, and will collapse " +"multiple references to the same Internet host, for instance, into a single " +"connection, so that it does not inefficiently establish an FTP connection, " +"close it, do something else, and then re-establish a connection to that same " +"host. This feature is useful for accessing busy FTP sites with limits on the " +"number of simultaneous anonymous users. APT also parallelizes connections to " +"different hosts to more effectively deal with sites with low bandwidth." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:107 +msgid "" +"It is important to list sources in order of preference, with the most " +"preferred source listed first. Typically this will result in sorting by " +"speed from fastest to slowest (CD-ROM followed by hosts on a local network, " +"followed by distant Internet hosts, for example)." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:112 +#, fuzzy +msgid "Some examples:" +msgstr "Exemplos" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:114 +#, no-wrap +msgid "" +"deb http://http.us.debian.org/debian stable main contrib non-free\n" +"deb http://http.us.debian.org/debian dists/stable-updates/\n" +" " +msgstr "" + +#. type: Content of: <refentry><refsect1><title> +#: sources.list.5.xml:120 +msgid "URI specification" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: sources.list.5.xml:125 +msgid "file" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:127 +msgid "" +"The file scheme allows an arbitrary directory in the file system to be " +"considered an archive. This is useful for NFS mounts and local mirrors or " +"archives." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:134 +msgid "" +"The cdrom scheme allows APT to use a local CDROM drive with media swapping. " +"Use the &apt-cdrom; program to create cdrom entries in the source list." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:141 +msgid "" +"The http scheme specifies an HTTP server for the archive. If an environment " +"variable <envar>http_proxy</envar> is set with the format http://server:" +"port/, the proxy server specified in <envar>http_proxy</envar> will be used. " +"Users of authenticated HTTP/1.1 proxies may use a string of the format " +"http://user:pass@server:port/. Note that this is an insecure method of " +"authentication." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:152 +msgid "" +"The ftp scheme specifies an FTP server for the archive. APT's FTP behavior " +"is highly configurable; for more information see the &apt-conf; manual page. " +"Please note that a ftp proxy can be specified by using the <envar>ftp_proxy</" +"envar> environment variable. It is possible to specify a http proxy (http " +"proxy servers often understand ftp urls) using this method and ONLY this " +"method. ftp proxies using http specified in the configuration file will be " +"ignored." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: sources.list.5.xml:161 +msgid "copy" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:163 +msgid "" +"The copy scheme is identical to the file scheme except that packages are " +"copied into the cache directory instead of used directly at their location. " +"This is useful for people using a zip disk to copy files around with APT." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: sources.list.5.xml:168 +msgid "rsh" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: sources.list.5.xml:168 +msgid "ssh" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:170 +msgid "" +"The rsh/ssh method invokes rsh/ssh to connect to a remote host as a given " +"user and access the files. It is a good idea to do prior arrangements with " +"RSA keys or rhosts. Access to files on the remote uses standard " +"<command>find</command> and <command>dd</command> commands to perform the " +"file transfers from the remote." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: sources.list.5.xml:178 +msgid "more recongnizable URI types" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: sources.list.5.xml:180 +msgid "" +"APT can be extended with more methods shipped in other optional packages " +"which should follow the nameing scheme <literal>apt-transport-" +"<replaceable>method</replaceable></literal>. The APT team e.g. maintain " +"also the <literal>apt-transport-https</literal> package which provides " +"access methods for https-URIs with features similiar to the http method, but " +"other methods for using e.g. debtorrent are also available, see " +"<citerefentry> <refentrytitle><filename>apt-transport-debtorrent</filename></" +"refentrytitle> <manvolnum>1</manvolnum></citerefentry>." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:122 +msgid "" +"The currently recognized URI types are cdrom, file, http, ftp, copy, ssh, " +"rsh. <placeholder type=\"variablelist\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:194 +msgid "" +"Uses the archive stored locally (or NFS mounted) at /home/jason/debian for " +"stable/main, stable/contrib, and stable/non-free." +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:196 +#, no-wrap +msgid "deb file:/home/jason/debian stable main contrib non-free" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:198 +msgid "As above, except this uses the unstable (development) distribution." +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:199 +#, no-wrap +msgid "deb file:/home/jason/debian unstable main contrib non-free" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:201 +msgid "Source line for the above" +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:202 +#, no-wrap +msgid "deb-src file:/home/jason/debian unstable main contrib non-free" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:204 +msgid "" +"Uses HTTP to access the archive at archive.debian.org, and uses only the " +"hamm/main area." +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:206 +#, no-wrap +msgid "deb http://archive.debian.org/debian-archive hamm main" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:208 +msgid "" +"Uses FTP to access the archive at ftp.debian.org, under the debian " +"directory, and uses only the stable/contrib area." +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:210 +#, no-wrap +msgid "deb ftp://ftp.debian.org/debian stable contrib" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:212 +msgid "" +"Uses FTP to access the archive at ftp.debian.org, under the debian " +"directory, and uses only the unstable/contrib area. If this line appears as " +"well as the one in the previous example in <filename>sources.list</filename> " +"a single FTP session will be used for both resource lines." +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:216 +#, no-wrap +msgid "deb ftp://ftp.debian.org/debian unstable contrib" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:218 +msgid "" +"Uses HTTP to access the archive at nonus.debian.org, under the debian-non-US " +"directory." +msgstr "" + +#. type: Content of: <refentry><refsect1><literallayout> +#: sources.list.5.xml:220 +#, no-wrap +msgid "deb http://nonus.debian.org/debian-non-US stable/non-US main contrib non-free" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><literallayout> +#: sources.list.5.xml:229 +#, no-wrap +msgid "deb http://ftp.de.debian.org/debian-non-US unstable/binary-$(ARCH)/" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:222 +msgid "" +"Uses HTTP to access the archive at nonus.debian.org, under the debian-non-US " +"directory, and uses only files found under <filename>unstable/binary-i386</" +"filename> on i386 machines, <filename>unstable/binary-m68k</filename> on " +"m68k, and so forth for other supported architectures. [Note this example " +"only illustrates how to use the substitution variable; non-us is no longer " +"structured like this] <placeholder type=\"literallayout\" id=\"0\"/>" +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: sources.list.5.xml:234 +#, fuzzy +msgid "&apt-cache; &apt-conf;" +msgstr "&apt-get; &apt-cache; &apt-conf; &sources-list;" + +#. type: <title> +#: guide.sgml:4 +msgid "APT User's Guide" +msgstr "" + +#. type: +#: guide.sgml:6 offline.sgml:6 +msgid "Jason Gunthorpe jgg@debian.org" +msgstr "" + +#. type: +#: guide.sgml:7 +msgid "$Id: guide.sgml,v 1.7 2003/04/26 23:26:13 doogie Exp $" +msgstr "" + +#. type: +#: guide.sgml:11 +msgid "" +"This document provides an overview of how to use the the APT package manager." +msgstr "" + +#. type: +#: guide.sgml:15 +msgid "Copyright © Jason Gunthorpe, 1998." +msgstr "" + +#. type:

+#: guide.sgml:21 offline.sgml:22 +msgid "" +"\"APT\" and this document are free software; you can redistribute them and/" +"or modify them under the terms of the GNU General Public License as " +"published by the Free Software Foundation; either version 2 of the License, " +"or (at your option) any later version." +msgstr "" + +#. type:

+#: guide.sgml:24 offline.sgml:25 +msgid "" +"For more details, on Debian GNU/Linux systems, see the file /usr/share/" +"common-licenses/GPL for the full license." +msgstr "" + +#. type: +#: guide.sgml:32 +msgid "General" +msgstr "" + +#. type:

+#: guide.sgml:38 +msgid "" +"The APT package currently contains two sections, the APT dselect method and the apt-get command line user interface. Both " +"provide a way to install and remove packages as well as download new " +"packages from the Internet." +msgstr "" + +#. type: +#: guide.sgml:39 +msgid "Anatomy of the Package System" +msgstr "" + +#. type:

+#: guide.sgml:44 +msgid "" +"The Debian packaging system has a large amount of information associated " +"with each package to help assure that it integrates cleanly and easily into " +"the system. The most prominent of its features is the dependency system." +msgstr "" + +#. type:

+#: guide.sgml:52 +msgid "" +"The dependency system allows individual programs to make use of shared " +"elements in the system such as libraries. It simplifies placing infrequently " +"used portions of a program in separate packages to reduce the number of " +"things the average user is required to install. Also, it allows for choices " +"in mail transport agents, X servers and so on." +msgstr "" + +#. type:

+#: guide.sgml:57 +msgid "" +"The first step to understanding the dependency system is to grasp the " +"concept of a simple dependency. The meaning of a simple dependency is that a " +"package requires another package to be installed at the same time to work " +"properly." +msgstr "" + +#. type:

+#: guide.sgml:63 +msgid "" +"For instance, mailcrypt is an emacs extension that aids in encrypting email " +"with GPG. Without GPGP installed mail-crypt is useless, so mailcrypt has a " +"simple dependency on GPG. Also, because it is an emacs extension it has a " +"simple dependency on emacs, without emacs it is completely useless." +msgstr "" + +#. type:

+#: guide.sgml:73 +msgid "" +"The other important dependency to understand is a conflicting dependency. It " +"means that a package, when installed with another package, will not work and " +"may possibly be extremely harmful to the system. As an example consider a " +"mail transport agent such as sendmail, exim or qmail. It is not possible to " +"have two mail transport agents installed because both need to listen to the " +"network to receive mail. Attempting to install two will seriously damage the " +"system so all mail transport agents have a conflicting dependency with all " +"other mail transport agents." +msgstr "" + +#. type:

+#: guide.sgml:83 +msgid "" +"As an added complication there is the possibility for a package to pretend " +"to be another package. Consider that exim and sendmail for many intents are " +"identical, they both deliver mail and understand a common interface. Hence, " +"the package system has a way for them to declare that they are both mail-" +"transport-agents. So, exim and sendmail both declare that they provide a " +"mail-transport-agent and other packages that need a mail transport agent " +"depend on mail-transport-agent. This can add a great deal of confusion when " +"trying to manually fix packages." +msgstr "" + +#. type:

+#: guide.sgml:88 +msgid "" +"At any given time a single dependency may be met by packages that are " +"already installed or it may not be. APT attempts to help resolve dependency " +"issues by providing a number of automatic algorithms that help in selecting " +"packages for installation." +msgstr "" + +#. type:

+#: guide.sgml:102 +msgid "" +"apt-get provides a simple way to install packages from the " +"command line. Unlike dpkg, apt-get does not " +"understand .deb files, it works with the package's proper name and can only " +"install .deb archives from a Source." +msgstr "" + +#. type:

+#: guide.sgml:109 +msgid "" +"The first

If you are using an http proxy server you must set " +"the http_proxy environment variable first, see sources.list(5)

thing that should be done before using apt-get is to " +"fetch the package lists from the Sources so that it knows what " +"packages are available. This is done with apt-get update. For " +"instance," +msgstr "" + +#. type: +#: guide.sgml:116 +#, no-wrap +msgid "" +"# apt-get update\n" +"Get http://ftp.de.debian.org/debian-non-US/ stable/binary-i386/ Packages\n" +"Get http://llug.sep.bnl.gov/debian/ testing/contrib Packages\n" +"Reading Package Lists... Done\n" +"Building Dependency Tree... Done" +msgstr "" + +#. type:

+#: guide.sgml:120 +msgid "Once updated there are several commands that can be used:" +msgstr "" + +#. type:

+#: guide.sgml:131 +msgid "" +"Upgrade will attempt to gently upgrade the whole system. Upgrade will never " +"install a new package or remove an existing package, nor will it ever " +"upgrade a package that might cause some other package to break. This can be " +"used daily to relatively safely upgrade the system. Upgrade will list all of " +"the packages that it could not upgrade, this usually means that they depend " +"on new packages or conflict with some other package. dselect or " +"apt-get install can be used to force these packages to install." +msgstr "" + +#. type:

+#: guide.sgml:140 +msgid "" +"Install is used to install packages by name. The package is automatically " +"fetched and installed. This can be useful if you already know the name of " +"the package to install and do not want to go into a GUI to select it. Any " +"number of packages may be passed to install, they will all be fetched. " +"Install automatically attempts to resolve dependency problems with the " +"listed packages and will print a summary and ask for confirmation if " +"anything other than its arguments are changed." +msgstr "" + +#. type:

+#: guide.sgml:149 +msgid "" +"Dist-upgrade is a complete upgrader designed to simplify upgrading between " +"releases of Debian. It uses a sophisticated algorithm to determine the best " +"set of packages to install, upgrade and remove to get as much of the system " +"to the newest release. In some situations it may be desired to use dist-" +"upgrade rather than spend the time manually resolving dependencies in " +"dselect. Once dist-upgrade has completed then dselect can be used to install any packages that may have been left out." +msgstr "" + +#. type:

+#: guide.sgml:152 +msgid "" +"It is important to closely look at what dist-upgrade is going to do, its " +"decisions may sometimes be quite surprising." +msgstr "" + +#. type:

+#: guide.sgml:163 +msgid "" +"apt-get has several command line options that are detailed in " +"its man page, . The most useful " +"option is -d which does not install the fetched files. If the " +"system has to download a large number of package it would be undesired to " +"start installing them in case something goes wrong. When -d is used " +"the downloaded archives can be installed by simply running the command that " +"caused them to be downloaded again without -d." +msgstr "" + +#. type: +#: guide.sgml:168 +msgid "DSelect" +msgstr "" + +#. type:

+#: guide.sgml:173 +msgid "" +"The APT dselect method provides the complete APT system with " +"the dselect package selection GUI. dselect is used " +"to select the packages to be installed or removed and APT actually installs " +"them." +msgstr "" + +#. type:

+#: guide.sgml:184 +msgid "" +"To enable the APT method you need to to select [A]ccess in dselect and then choose the APT method. You will be prompted for a set of " +"Sources which are places to fetch archives from. These can be " +"remote Internet sites, local Debian mirrors or CDROMs. Each source can " +"provide a fragment of the total Debian archive, APT will automatically " +"combine them to form a complete set of packages. If you have a CDROM then it " +"is a good idea to specify it first and then specify a mirror so that you " +"have access to the latest bug fixes. APT will automatically use packages on " +"your CDROM before downloading from the Internet." +msgstr "" + +#. type: +#: guide.sgml:198 +#, no-wrap +msgid "" +" Set up a list of distribution source locations\n" +"\t \n" +" Please give the base URL of the debian distribution.\n" +" The access schemes I know about are: http file\n" +"\t \n" +" For example:\n" +" file:/mnt/debian,\n" +" ftp://ftp.debian.org/debian,\n" +" http://ftp.de.debian.org/debian,\n" +" \n" +" \n" +" URL [http://llug.sep.bnl.gov/debian]:" +msgstr "" + +#. type:

+#: guide.sgml:205 +msgid "" +"The Sources setup starts by asking for the base of the Debian " +"archive, defaulting to a HTTP mirror. Next it asks for the distribution to " +"get." +msgstr "" + +#. type: +#: guide.sgml:212 +#, no-wrap +msgid "" +" Please give the distribution tag to get or a path to the\n" +" package file ending in a /. The distribution\n" +" tags are typically something like: stable unstable testing non-US\n" +" \n" +" Distribution [stable]:" +msgstr "" + +#. type:

+#: guide.sgml:222 +msgid "" +"The distribution refers to the Debian version in the archive, stable refers to the latest released version and unstable refers to " +"the developmental version. non-US is only available on some mirrors " +"and refers to packages that contain encryption technology or other things " +"that cannot be exported from the United States. Importing these packages " +"into the US is legal however." +msgstr "" + +#. type: +#: guide.sgml:228 +#, no-wrap +msgid "" +" Please give the components to get\n" +" The components are typically something like: main contrib non-free\n" +" \n" +" Components [main contrib non-free]:" +msgstr "" + +#. type:

+#: guide.sgml:236 +msgid "" +"The components list refers to the list of sub distributions to fetch. The " +"distribution is split up based on software licenses, main being DFSG free " +"packages while contrib and non-free contain things that have various " +"restrictions placed on their use and distribution." +msgstr "" + +#. type:

+#: guide.sgml:240 +msgid "" +"Any number of sources can be added, the setup script will continue to prompt " +"until you have specified all that you want." +msgstr "" + +#. type:

+#: guide.sgml:247 +msgid "" +"Before starting to use dselect it is necessary to update the " +"available list by selecting [U]pdate from the menu. This is a super-set of " +"apt-get update that makes the fetched information available to " +"dselect. [U]pdate must be performed even if apt-get update has been run before." +msgstr "" + +#. type:

+#: guide.sgml:253 +msgid "" +"You can then go on and make your selections using [S]elect and then perform " +"the installation using [I]nstall. When using the APT method the [C]onfig and " +"[R]emove commands have no meaning, the [I]nstall command performs both of " +"them together." +msgstr "" + +#. type:

+#: guide.sgml:258 +msgid "" +"By default APT will automatically remove the package (.deb) files once they " +"have been successfully installed. To change this behavior place Dselect::" +"clean \"prompt\"; in /etc/apt/apt.conf." +msgstr "" + +#. type: +#: guide.sgml:264 +msgid "The Interface" +msgstr "" + +#. type:

+#: guide.sgml:278 +msgid "" +"Both that APT dselect method and apt-get share the " +"same interface. It is a simple system that generally tells you what it will " +"do and then goes and does it.

The dselect method " +"actually is a set of wrapper scripts to apt-get. The method " +"actually provides more functionality than is present in apt-get " +"alone.

 After printing out a summary of what will happen APT " +"then will print out some informative status messages so that you can " +"estimate how far along it is and how much is left to do." +msgstr "" + +#. type: +#: guide.sgml:280 +msgid "Startup" +msgstr "" + +#. type:

+#: guide.sgml:284 +msgid "" +"Before all operations except update, APT performs a number of actions to " +"prepare its internal state. It also does some checks of the system's state. " +"At any time these operations can be performed by running apt-get check." +msgstr "" + +#. type: +#: guide.sgml:289 +#, no-wrap +msgid "" +"# apt-get check\n" +"Reading Package Lists... Done\n" +"Building Dependency Tree... Done" +msgstr "" + +#. type:

+#: guide.sgml:297 +msgid "" +"The first thing it does is read all the package files into memory. APT uses " +"a caching scheme so this operation will be faster the second time it is run. " +"If some of the package files are not found then they will be ignored and a " +"warning will be printed when apt-get exits." +msgstr "" + +#. type:

+#: guide.sgml:303 +msgid "" +"The final operation performs a detailed analysis of the system's " +"dependencies. It checks every dependency of every installed or unpacked " +"package and considers if it is OK. Should this find a problem then a report " +"will be printed out and apt-get will refuse to run." +msgstr "" + +#. type: +#: guide.sgml:320 +#, no-wrap +msgid "" +"# apt-get check\n" +"Reading Package Lists... Done\n" +"Building Dependency Tree... Done\n" +"You might want to run apt-get -f install' to correct these.\n" +"Sorry, but the following packages have unmet dependencies:\n" +" 9fonts: Depends: xlib6g but it is not installed\n" +" uucp: Depends: mailx but it is not installed\n" +" blast: Depends: xlib6g (>= 3.3-5) but it is not installed\n" +" adduser: Depends: perl-base but it is not installed\n" +" aumix: Depends: libgpmg1 but it is not installed\n" +" debiandoc-sgml: Depends: sgml-base but it is not installed\n" +" bash-builtins: Depends: bash (>= 2.01) but 2.0-3 is installed\n" +" cthugha: Depends: svgalibg1 but it is not installed\n" +" Depends: xlib6g (>= 3.3-5) but it is not installed\n" +" libreadlineg2: Conflicts:libreadline2 (<< 2.1-2.1)" +msgstr "" + +#. type:

+#: guide.sgml:329 +msgid "" +"In this example the system has many problems, including a serious problem " +"with libreadlineg2. For each package that has unmet dependencies a line is " +"printed out indicating the package with the problem and the dependencies " +"that are unmet. A short explanation of why the package has a dependency " +"problem is also included." +msgstr "" + +#. type:

+#: guide.sgml:337 +msgid "" +"There are two ways a system can get into a broken state like this. The first " +"is caused by dpkg missing some subtle relationships between " +"packages when performing upgrades.

APT however considers all " +"known dependencies and attempts to prevent broken packages

. " +"The second is if a package installation fails during an operation. In this " +"situation a package may have been unpacked without its dependents being " +"installed." +msgstr "" + +#. type:

+#: guide.sgml:345 +msgid "" +"The second situation is much less serious than the first because APT places " +"certain constraints on the order that packages are installed. In both cases " +"supplying the -f option to apt-get will cause APT to " +"deduce a possible solution to the problem and then continue on. The APT " +"dselect method always supplies the -f option to allow " +"for easy continuation of failed maintainer scripts." +msgstr "" + +#. type:

+#: guide.sgml:351 +msgid "" +"However, if the -f option is used to correct a seriously broken " +"system caused by the first case then it is possible that it will either fail " +"immediately or the installation sequence will fail. In either case it is " +"necessary to manually use dpkg (possibly with forcing options) to correct " +"the situation enough to allow APT to proceed." +msgstr "" + +#. type: +#: guide.sgml:356 +msgid "The Status Report" +msgstr "" + +#. type:

+#: guide.sgml:363 +msgid "" +"Before proceeding apt-get will present a report on what will " +"happen. Generally the report reflects the type of operation being performed " +"but there are several common elements. In all cases the lists reflect the " +"final state of things, taking into account the -f option and any " +"other relevant activities to the command being executed." +msgstr "" + +#. type: +#: guide.sgml:364 +msgid "The Extra Package list" +msgstr "" + +#. type: +#: guide.sgml:372 +#, no-wrap +msgid "" +"The following extra packages will be installed:\n" +" libdbd-mysql-perl xlib6 zlib1 xzx libreadline2 libdbd-msql-perl\n" +" mailpgp xdpkg fileutils pinepgp zlib1g xlib6g perl-base\n" +" bin86 libgdbm1 libgdbmg1 quake-lib gmp2 bcc xbuffy\n" +" squake pgp-i python-base debmake ldso perl libreadlineg2\n" +" ssh" +msgstr "" + +#. type:

+#: guide.sgml:379 +msgid "" +"The Extra Package list shows all of the packages that will be installed or " +"upgraded in excess of the ones mentioned on the command line. It is only " +"generated for an install command. The listed packages are often the " +"result of an Auto Install." +msgstr "" + +#. type: +#: guide.sgml:382 +msgid "The Packages to Remove" +msgstr "" + +#. type: +#: guide.sgml:389 +#, no-wrap +msgid "" +"The following packages will be REMOVED:\n" +" xlib6-dev xpat2 tk40-dev xkeycaps xbattle xonix\n" +" xdaliclock tk40 tk41 xforms0.86 ghostview xloadimage xcolorsel\n" +" xadmin xboard perl-debug tkined xtetris libreadline2-dev perl-suid\n" +" nas xpilot xfig" +msgstr "" + +#. type:

+#: guide.sgml:399 +msgid "" +"The Packages to Remove list shows all of the packages that will be removed " +"from the system. It can be shown for any of the operations and should be " +"given a careful inspection to ensure nothing important is to be taken off. " +"The -f option is especially good at generating packages to remove " +"so extreme care should be used in that case. The list may contain packages " +"that are going to be removed because they are only partially installed, " +"possibly due to an aborted installation." +msgstr "" + +#. type: +#: guide.sgml:402 +msgid "The New Packages list" +msgstr "" + +#. type: +#: guide.sgml:406 +#, no-wrap +msgid "" +"The following NEW packages will installed:\n" +" zlib1g xlib6g perl-base libgdbmg1 quake-lib gmp2 pgp-i python-base" +msgstr "" + +#. type:

+#: guide.sgml:411 +msgid "" +"The New Packages list is simply a reminder of what will happen. The packages " +"listed are not presently installed in the system but will be when APT is " +"done." +msgstr "" + +#. type: +#: guide.sgml:414 +msgid "The Kept Back list" +msgstr "" + +#. type: +#: guide.sgml:419 +#, no-wrap +msgid "" +"The following packages have been kept back\n" +" compface man-db tetex-base msql libpaper svgalib1\n" +" gs snmp arena lynx xpat2 groff xscreensaver" +msgstr "" + +#. type:

+#: guide.sgml:428 +msgid "" +"Whenever the whole system is being upgraded there is the possibility that " +"new versions of packages cannot be installed because they require new things " +"or conflict with already installed things. In this case the package will " +"appear in the Kept Back list. The best way to convince packages listed there " +"to install is with apt-get install or by using dselect " +"to resolve their problems." +msgstr "" + +#. type: +#: guide.sgml:431 +msgid "Held Packages warning" +msgstr "" + +#. type: +#: guide.sgml:435 +#, no-wrap +msgid "" +"The following held packages will be changed:\n" +" cvs" +msgstr "" + +#. type:

+#: guide.sgml:441 +msgid "" +"Sometimes you can ask APT to install a package that is on hold, in such a " +"case it prints out a warning that the held package is going to be changed. " +"This should only happen during dist-upgrade or install." +msgstr "" + +#. type: +#: guide.sgml:444 +msgid "Final summary" +msgstr "" + +#. type:

+#: guide.sgml:447 +msgid "" +"Finally, APT will print out a summary of all the changes that will occur." +msgstr "" + +#. type: +#: guide.sgml:452 +#, no-wrap +msgid "" +"206 packages upgraded, 8 newly installed, 23 to remove and 51 not upgraded.\n" +"12 packages not fully installed or removed.\n" +"Need to get 65.7M/66.7M of archives. After unpacking 26.5M will be used." +msgstr "" + +#. type:

+#: guide.sgml:470 +msgid "" +"The first line of the summary simply is a reduced version of all of the " +"lists and includes the number of upgrades - that is packages already " +"installed that have new versions available. The second line indicates the " +"number of poorly configured packages, possibly the result of an aborted " +"installation. The final line shows the space requirements that the " +"installation needs. The first pair of numbers refer to the size of the " +"archive files. The first number indicates the number of bytes that must be " +"fetched from remote locations and the second indicates the total size of all " +"the archives required. The next number indicates the size difference between " +"the presently installed packages and the newly installed packages. It is " +"roughly equivalent to the space required in /usr after everything is done. " +"If a large number of packages are being removed then the value may indicate " +"the amount of space that will be freed." +msgstr "" + +#. type:

+#: guide.sgml:473 +msgid "" +"Some other reports can be generated by using the -u option to show packages " +"to upgrade, they are similar to the previous examples." +msgstr "" + +#. type: +#: guide.sgml:477 +msgid "The Status Display" +msgstr "" + +#. type:

+#: guide.sgml:481 +msgid "" +"During the download of archives and package files APT prints out a series of " +"status messages." +msgstr "" + +#. type: +#: guide.sgml:490 +#, no-wrap +msgid "" +"# apt-get update\n" +"Get:1 http://ftp.de.debian.org/debian-non-US/ stable/non-US/ Packages\n" +"Get:2 http://llug.sep.bnl.gov/debian/ testing/contrib Packages\n" +"Hit http://llug.sep.bnl.gov/debian/ testing/main Packages\n" +"Get:4 http://ftp.de.debian.org/debian-non-US/ unstable/binary-i386/ Packages\n" +"Get:5 http://llug.sep.bnl.gov/debian/ testing/non-free Packages\n" +"11% [5 testing/non-free `Waiting for file' 0/32.1k 0%] 2203b/s 1m52s" +msgstr "" + +#. type:

+#: guide.sgml:500 +msgid "" +"The lines starting with Get are printed out when APT begins to " +"fetch a file while the last line indicates the progress of the download. The " +"first percent value on the progress line indicates the total percent done of " +"all files. Unfortunately since the size of the Package files is unknown " +"apt-get update estimates the percent done which causes some " +"inaccuracies." +msgstr "" + +#. type:

+#: guide.sgml:509 +msgid "" +"The next section of the status line is repeated once for each download " +"thread and indicates the operation being performed and some useful " +"information about what is happening. Sometimes this section will simply read " +"Forking which means the OS is loading the download module. The " +"first word after the [ is the fetch number as shown on the history lines. " +"The next word is the short form name of the object being downloaded. For " +"archives it will contain the name of the package that is being fetched." +msgstr "" + +#. type:

+#: guide.sgml:524 +msgid "" +"Inside of the single quote is an informative string indicating the progress " +"of the negotiation phase of the download. Typically it progresses from " +"Connecting to Waiting for file to Downloading or " +"Resuming. The final value is the number of bytes downloaded from " +"the remote site. Once the download begins this is represented as " +"102/10.2k indicating that 102 bytes have been fetched and 10.2 " +"kilobytes is expected. The total size is always shown in 4 figure notation " +"to preserve space. After the size display is a percent meter for the file " +"itself. The second last element is the instantaneous average speed. This " +"values is updated every 5 seconds and reflects the rate of data transfer for " +"that period. Finally is shown the estimated transfer time. This is updated " +"regularly and reflects the time to complete everything at the shown transfer " +"rate." +msgstr "" + +#. type:

+#: guide.sgml:530 +msgid "" +"The status display updates every half second to provide a constant feedback " +"on the download progress while the Get lines scroll back whenever a new file " +"is started. Since the status display is constantly updated it is unsuitable " +"for logging to a file, use the -q option to remove the status " +"display." +msgstr "" + +#. type: +#: guide.sgml:535 +msgid "Dpkg" +msgstr "" + +#. type:

+#: guide.sgml:542 +msgid "" +"APT uses dpkg for installing the archives and will switch over " +"to the dpkg interface once downloading is completed. " +"dpkg will also ask a number of questions as it processes the " +"packages and the packages themselves may also ask several questions. Before " +"each question there is usually a description of what it is asking and the " +"questions are too varied to discuss completely here." +msgstr "" + +#. type: +#: offline.sgml:4 +msgid "Using APT Offline" +msgstr "" + +#. type: +#: offline.sgml:7 +msgid "$Id: offline.sgml,v 1.8 2003/02/12 15:06:41 doogie Exp $" +msgstr "" + +#. type: +#: offline.sgml:12 +msgid "" +"This document describes how to use APT in a non-networked environment, " +"specifically a 'sneaker-net' approach for performing upgrades." +msgstr "" + +#. type: +#: offline.sgml:16 +msgid "Copyright © Jason Gunthorpe, 1999." +msgstr "" + +#. type: +#: offline.sgml:32 +msgid "Introduction" +msgstr "" + +#. type: +#: offline.sgml:34 offline.sgml:65 offline.sgml:180 +msgid "Overview" +msgstr "" + +#. type:

+#: offline.sgml:40 +msgid "" +"Normally APT requires direct access to a Debian archive, either from a local " +"media or through a network. Another common complaint is that a Debian " +"machine is on a slow link, such as a modem and another machine has a very " +"fast connection but they are physically distant." +msgstr "" + +#. type:

+#: offline.sgml:51 +msgid "" +"The solution to this is to use large removable media such as a Zip disc or a " +"SuperDisk disc. These discs are not large enough to store the entire Debian " +"archive but can easily fit a subset large enough for most users. The idea is " +"to use APT to generate a list of packages that are required and then fetch " +"them onto the disc using another machine with good connectivity. It is even " +"possible to use another Debian machine with APT or to use a completely " +"different OS and a download tool like wget. Let remote host mean " +"the machine downloading the packages, and target host the one with " +"bad or no connection." +msgstr "" + +#. type:

+#: offline.sgml:57 +msgid "" +"This is achieved by creatively manipulating the APT configuration file. The " +"essential premis to tell APT to look on a disc for it's archive files. Note " +"that the disc should be formated with a filesystem that can handle long file " +"names such as ext2, fat32 or vfat." +msgstr "" + +#. type: +#: offline.sgml:63 +msgid "Using APT on both machines" +msgstr "" + +#. type:

+#: offline.sgml:71 +msgid "" +"APT being available on both machines gives the simplest configuration. The " +"basic idea is to place a copy of the status file on the disc and use the " +"remote machine to fetch the latest package files and decide which packages " +"to download. The disk directory structure should look like:" +msgstr "" + +#. type: +#: offline.sgml:80 +#, no-wrap +msgid "" +" /disc/\n" +" archives/\n" +" partial/\n" +" lists/\n" +" partial/\n" +" status\n" +" sources.list\n" +" apt.conf" +msgstr "" + +#. type: +#: offline.sgml:88 +msgid "The configuration file" +msgstr "" + +#. type:

+#: offline.sgml:96 +msgid "" +"The configuration file should tell APT to store its files on the disc and to " +"use the configuration files on the disc as well. The sources.list should " +"contain the proper sites that you wish to use from the remote machine, and " +"the status file should be a copy of /var/lib/dpkg/status from the " +"target host. Please note, if you are using a local archive you must " +"use copy URIs, the syntax is identical to file URIs." +msgstr "" + +#. type:

+#: offline.sgml:100 +msgid "" +"apt.conf must contain the necessary information to make APT use the " +"disc:" +msgstr "" + +#. type: +#: offline.sgml:124 +#, no-wrap +msgid "" +" APT\n" +" {\n" +" /* This is not necessary if the two machines are the same arch, it tells\n" +" the remote APT what architecture the target machine is */\n" +" Architecture \"i386\";\n" +" \n" +" Get::Download-Only \"true\";\n" +" };\n" +" \n" +" Dir\n" +" {\n" +" /* Use the disc for state information and redirect the status file from\n" +" the /var/lib/dpkg default */\n" +" State \"/disc/\";\n" +" State::status \"status\";\n" +"\n" +" // Binary caches will be stored locally\n" +" Cache::archives \"/disc/archives/\";\n" +" Cache \"/tmp/\";\n" +" \n" +" // Location of the source list.\n" +" Etc \"/disc/\";\n" +" };" +msgstr "" + +#. type:

+#: offline.sgml:129 +msgid "" +"More details can be seen by examining the apt.conf man page and the sample " +"configuration file in /usr/share/doc/apt/examples/apt.conf." +msgstr "" + +#. type:

+#: offline.sgml:136 +msgid "" +"On the target machine the first thing to do is mount the disc and copy /" +"var/lib/dpkg/status to it. You will also need to create the directories " +"outlined in the Overview, archives/partial/ and lists/partial/ Then take the disc to the remote machine and configure the sources.list. " +"On the remote machine execute the following:" +msgstr "" + +#. type: +#: offline.sgml:142 +#, no-wrap +msgid "" +" # export APT_CONFIG=\"/disc/apt.conf\"\n" +" # apt-get update\n" +" [ APT fetches the package files ]\n" +" # apt-get dist-upgrade\n" +" [ APT fetches all the packages needed to upgrade the target machine ]" +msgstr "" + +#. type:

+#: offline.sgml:149 +msgid "" +"The dist-upgrade command can be replaced with any-other standard APT " +"commands, particularly dselect-upgrade. You can even use an APT front end " +"such as dselect However this presents a problem in communicating " +"your selections back to the local computer." +msgstr "" + +#. type:

+#: offline.sgml:153 +msgid "" +"Now the disc contains all of the index files and archives needed to upgrade " +"the target machine. Take the disc back and run:" +msgstr "" + +#. type: +#: offline.sgml:159 +#, no-wrap +msgid "" +" # export APT_CONFIG=\"/disc/apt.conf\"\n" +" # apt-get check\n" +" [ APT generates a local copy of the cache files ]\n" +" # apt-get --no-d -o dir::state::status=/var/lib/dpkg/status dist-upgrade\n" +" [ Or any other APT command ]" +msgstr "" + +#. type:

+#: offline.sgml:165 +msgid "" +"It is necessary for proper function to re-specify the status file to be the " +"local one. This is very important!" +msgstr "" + +#. type:

+#: offline.sgml:172 +msgid "" +"If you are using dselect you can do the very risky operation of copying disc/" +"status to /var/lib/dpkg/status so that any selections you made on the remote " +"machine are updated. I highly recommend that people only make selections on " +"the local machine - but this may not always be possible. DO NOT copy the " +"status file if dpkg or APT have been run in the mean time!!" +msgstr "" + +#. type: +#: offline.sgml:178 +msgid "Using APT and wget" +msgstr "" + +#. type:

+#: offline.sgml:185 +msgid "" +"wget is a popular and portable download tool that can run on nearly " +"any machine. Unlike the method above this requires that the Debian machine " +"already has a list of available packages." +msgstr "" + +#. type:

+#: offline.sgml:190 +msgid "" +"The basic idea is to create a disc that has only the archive files " +"downloaded from the remote site. This is done by using the --print-uris " +"option to apt-get and then preparing a wget script to actually fetch the " +"packages." +msgstr "" + +#. type: +#: offline.sgml:196 +#, fuzzy +msgid "Operation" +msgstr "Descrição" + +#. type:

+#: offline.sgml:200 +msgid "" +"Unlike the previous technique no special configuration files are required. " +"We merely use the standard APT commands to generate the file list." +msgstr "" + +#. type: +#: offline.sgml:205 +#, no-wrap +msgid "" +" # apt-get dist-upgrade \n" +" [ Press no when prompted, make sure you are happy with the actions ]\n" +" # apt-get -qq --print-uris dist-upgrade > uris\n" +" # awk '{print \"wget -O \" $2 \" \" $1}' < uris > /disc/wget-script" +msgstr "" + +#. type:

+#: offline.sgml:210 +msgid "" +"Any command other than dist-upgrade could be used here, including dselect-" +"upgrade." +msgstr "" + +#. type:

+#: offline.sgml:216 +msgid "" +"The /disc/wget-script file will now contain a list of wget commands to " +"execute in order to fetch the necessary archives. This script should be run " +"with the current directory as the disc's mount point so as to save the " +"output on the disc." +msgstr "" + +#. type:

+#: offline.sgml:219 +msgid "The remote machine would do something like" +msgstr "" + +#. type: +#: offline.sgml:223 +#, no-wrap +msgid "" +" # cd /disc\n" +" # sh -x ./wget-script\n" +" [ wait.. ]" +msgstr "" + +#. type: +#: offline.sgml:228 +msgid "" +"Once the archives are downloaded and the disc returned to the Debian machine " +"installation can proceed using," +msgstr "" + +#. type: +#: offline.sgml:230 +#, no-wrap +msgid " # apt-get -o dir::cache::archives=\"/disc/\" dist-upgrade" +msgstr "" + +#. type:

+#: offline.sgml:234 +msgid "Which will use the already fetched archives on the disc." +msgstr "" + +#, fuzzy +#~ msgid "/usr/share/doc/apt/" +#~ msgstr "/usr/share/doc/apt/" + +#, fuzzy +#~ msgid "&docdir;examples/configure-index.gz" +#~ msgstr "&docdir;examples/configure-index.gz" + +#, fuzzy +#~ msgid "/var/lib/apt" +#~ msgstr "/var/lib/apt" + +#, fuzzy +#~ msgid "/var/cache/apt" +#~ msgstr "/var/cache/apt" + +#, fuzzy +#~ msgid "" +#~ "\n" +#~ " \n" +#~ " \n" +#~ " \n" +#~ "\n" +#~ " \n" +#~ " \n" +#~ " \n" +#~ msgstr "" +#~ "\n" +#~ " \n" +#~ " \n" +#~ " \n" +#~ "\n" +#~ " \n" +#~ " \n" +#~ " \n" + +#, fuzzy +#~ msgid "5" +#~ msgstr "5" + +#, fuzzy +#~ msgid " Then:" +#~ msgstr " Então :" + +#, fuzzy +#~ msgid "&manbugs; &manauthor;" +#~ msgstr "&manbugs; &manauthor;" diff --git a/doc/pt_BR/addendum/xml_pt_BR.add b/doc/pt_BR/addendum/xml_pt_BR.add new file mode 100644 index 000000000..08f94ce20 --- /dev/null +++ b/doc/pt_BR/addendum/xml_pt_BR.add @@ -0,0 +1,5 @@ +PO4A-HEADER:mode=after;position=manbugs;beginboundary=^ + Tradução + Esta página de manual foi traduzida para o Português do Brasil por + André Luís Lopes andrelop@ig.com.br. + diff --git a/doc/pt_BR/apt.ent.pt_BR b/doc/pt_BR/apt.ent.pt_BR deleted file mode 100644 index 636805b13..000000000 --- a/doc/pt_BR/apt.ent.pt_BR +++ /dev/null @@ -1,157 +0,0 @@ - - - - -&docdir;examples/configure-index.gz"> -/etc/apt.conf"> - - - - - - - "> - - - - "> - - - - "> - - - - "> - - - - "> - - - - "> - - - - "> - - - - "> - - - - "> - - - - "> - - - - "> - - - - "> - - - - "> - - - - "> - - - -
apt@packages.debian.org
- Jason Gunthorpe - 1998-2001 Jason Gunthorpe - 12 Março 2001 - -"> - - -Bugs</> - <para> - Consulte a <ulink url='http://bugs.debian.org/apt'>página de bugs do APT</>. - Caso você queira relatar um bug no APT, por favor consulte o arquivo - <filename>/usr/share/doc/debian/bug-reporting.txt</> ou o comando &reportbug;. - </RefSect1> -"> - -<!-- Boiler plate Author section --> -<!ENTITY manauthor " - <RefSect1><Title>Author</> - <para> - O APT foi escrito pela equipe APT <email>apt@packages.debian.org</>. - </RefSect1> -"> - -<!-- Brazilian Portuguese Translation Credits section --> -<!ENTITY ptbr-mantranslator " - <RefSect1><Title>Tradução</> - <para> - Esta página de manual foi traduzida para o Português do Brasil por - André Luís Lopes <email>andrelop@ig.com.br</>. - </RefSect1> -"> - - -<!-- Should be used within the option section of the text to - put in the blurb about -h, -v, -c and -o --> -<!ENTITY apt-commonoptions " - <VarListEntry><term><option/-h/</><term><option/--help/</> - <ListItem><Para> - Exibe um pequeno resumo de uso. - </VarListEntry> - - <VarListEntry><term><option/-v/</><term><option/--version/</> - <ListItem><Para> - Exibe a versão do programa. - </VarListEntry> - - <VarListEntry><term><option/-c/</><term><option/--config-file/</> - <ListItem><Para> - Arquivo de Configuração; Especifica um arquivo de configuração - a ser usado. O programa irá ler o arquivo de configuração padrão - e então este arquivo de configuração. Consulte &apt-conf; para - informação de sintaxe. - </VarListEntry> - - <VarListEntry><term><option/-o/</><term><option/--option/</> - <ListItem><Para> - Defie uma Opção de Configuração; Esta opção irá definir uma opção - de configuração arbitrária. A sintaxe é <option>-o Foo::Bar=bar</>. - </VarListEntry> -"> - -<!-- Should be used within the option section of the text to - put in the blurb about -h, -v, -c and -o --> -<!ENTITY apt-cmdblurb " - <para> - Todas as opções de linha de comando podem ser definidas usando o - arquivo de configuração, as descrições indicam a opção de configuração - a ser definida. Para opções booleanas você pode sobrepor o arquivo de - configuração usando algo como <option/-f-/,<option/--no-f/, - <option/-f=no/ ou diversas outras variantes. - </para> -"> diff --git a/doc/pt_BR/apt_preferences.pt_BR.5.sgml b/doc/pt_BR/apt_preferences.pt_BR.5.sgml deleted file mode 100644 index 212c43b66..000000000 --- a/doc/pt_BR/apt_preferences.pt_BR.5.sgml +++ /dev/null @@ -1,589 +0,0 @@ -<!-- -*- mode: sgml; mode: fold -*- --> -<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V3.1//EN" [ - -<!ENTITY % aptent SYSTEM "apt.ent.pt_BR"> -%aptent; - -]> - -<refentry lang="pt_BR"> - &apt-docinfo; - - <refmeta> - <refentrytitle>apt_preferences</> - <manvolnum>5</> - </refmeta> - - <!-- Man page title --> - <refnamediv> - <refname>apt_preferences</> - <refpurpose>Arquivo de controle de preferências para o APT</> - </refnamediv> - -<RefSect1> -<Title>Descrição - -O arquivo de preferências do APT /etc/apt/preferences -pode ser usado para controlar quais versões de pacotes serão -selecionadas para instalação. - - - -Diversas versões de um pacote podem estar disponíveis para -instalação quando o arquivo &sources-list; contém referências para -mais de uma distribuição (por exemplo, stable e -testing). O APT atribui uma prioridade para cada -versão que esteja disponível. Sujeito a obstáculos de dependências, o -apt-get seleciona para instalação a versão com a -maior prioridade. -O arquivo de preferências do APT sobrepoe as prioridades que o APT -atribui a cada versão de pacote por padrão, dando assim ao usuário -controle sobre qual versão do pacote é selecionada para instalação. - - -Diversas instâncias da mesma versão de um pacote pode estar disponíveis -quando o arquivo &sources-list; contém referências a mais de uma fonte. -Nesse caso, o apt-get faz o download da instância -listada antes no arquivo &sources-list; . -O arquivo de preferências do APT não afeta a escolha da instância. - - -Atribuições de Prioridade Padrão do APT</> - -<para> -Caso não exista um arquivo de preferências ou caso não exista uma -entrada no arquivo que se aplique a uma instância em particular, a -prioridade atribuída a essa instância é a prioridade da distribuição -para a qual a instância pertence. É possível selecionar uma distribuição, -conhecida como "a versão alvo" (the target release), que recebe uma -prioridade maior do que as outras distribuições. -A versão alvo pode ser definida na linha de comando do -<command>apt-get</command> ou no arquivo de configuração do APT -<filename>/etc/apt/apt.conf</filename>. -Por exemplo, -<programlisting> -<command>apt-get install -t testing <replaceable>algum-pacote</replaceable></command> -</programlisting> -<programlisting> -APT::Default-Release "stable"; -</programlisting> -</para> - -<para> -Caso uma versão alvo tenha sido especificada o APT usará o seguinte -algoritmo para definir as prioridades das instâncias de um pacote. -Atribuirá : -<variablelist> -<varlistentry> -<term>prioridade 100</term> -<listitem><simpara>para a instância que já esteja instalada (caso exista).</simpara></listitem> -</varlistentry> -<varlistentry> -<term>prioridade 500</term> -<listitem><simpara>para as instâncias que não estã instaladas e que não pertencem a versão alvo.</simpara></listitem> -</varlistentry> -<varlistentry> -<term>prioridade 990</term> -<listitem><simpara>para as instâncias que não estejam instaladas e pertençam a versão alvo.</simpara></listitem> -</varlistentry> -</variablelist> -</para> - -<para> -Caso nenhuma versão alvo tenha sido especificada, o APT simplesmente -irá atribuir a prioridade 100 para todas as instâncias de pacotes instaladas -e a prioridade 500 para todas as instâncias de pacotes não instaladas. -</para> - -<para> -O APT aplica as regras a seguir, listadas em ordem de precedência, para -determinar qual instância de um pacote instalar. -<itemizedlist> -<listitem><simpara>Nunca faz um downgrade a menos que a prioridade de -uma instância disponível exceda 1000. (Fazer um "downgrade" é instalar uma -versão menos recente de um pacote no lugar de uma versão mais recente. Note -que nenhuma das prioridades padrão do APT excede 1000; prioridades altas -como essa podem ser definidas somente no arquivo de preferências. Note -também que fazer um "downgrade" pode ser arriscado.)</simpara></listitem> -<listitem><simpara>Instala a instância de prioridade mais alta.</simpara></listitem> -<listitem><simpara>Caso duas ou mais instâncias possuam a mesma prioridade, -instala a instância mais recente (ou seja, aquela com o maior número de -versão).</simpara></listitem> -<listitem><simpara>Caso duas ou mais instâncias possuam a mesma prioridade -e número de versão mas os pacotes sejam diferentes em alguns de seus -metadados ou a opção <literal/--reinstall/ seja fornecida, instala aquela -desinstalada.</simpara></listitem> -</itemizedlist> -</para> - -<para> -Em uma situação típica, a instância instalada de um pacote -(prioridade 100) não é tão recente quanto uma das versões disponíveis -nas fontes listadas no arquivo &sources-list; (prioridade 500 ou 990). -Então o pacote será atualizado quando os comandos -<command>apt-get install <replaceable>algum-pacote</replaceable></command> -ou <command>apt-get dist-upgrade</command> forem executados. -</para> - -<para> -Mais raramente, a versão instalada de um pacote é <emphasis/mais/ -recente do que qualquer uma das outras versões disponíveis. O dowgrade -do pacote não será feito quando os comandos -<command>apt-get install <replaceable>algum-pacote</replaceable></command> -ou <command>apt-get upgrade</command> forem executados. -</para> - -<para> -Algumas vezes a versão instalada de um pacote é mais recente que a versão -que pertence a versão alvo, mas não tão recente quanto a versão que -pertence a alguma outra distribuição. Um pacote como esse será na verdade -atualizado quando os comandos -<command>apt-get install <replaceable>algum-pacote</replaceable></command> -ou <command>apt-get upgrade</command> forem executados, devido a pelo -menos <emphasis/uma/ das versões disponíveis possuir uma prioridade maior -do que a versão instalada. -</para> - -</RefSect2> - -<RefSect2><Title>O Efeito das Preferências do APT</> - -<para> -O arquivo de preferências do APT permite ao administrador do -sistema personalizar prioridades. O arquivo consiste de um ou mais -registros de múltiplas linhas separados por linhas em branco. Registros -podem possuir uma das duas formas, uma forma específica e uma forma geral. -<itemizedlist> -<listitem> -<simpara> -A forma específica atribui uma uma prioridade (uma "Pin-Priority") -para um pacote e versão ou faixa de versão especificados. Por exemplo, -o registro a seguir atribui uma prioridade alta para todas as versões do -pacote <filename/perl/ os quais tenham seus números de versão iniciando -com "<literal/5.8/". -</simpara> - -<programlisting> -Package: perl -Pin: version 5.8* -Pin-Priority: 1001 -</programlisting> -</listitem> - -<listitem><simpara> -O forma geral atribui uma prioridade para todas as versões de pacotes em -uma dada distribuição (isto é, para toda as versões de pacotes que estejam -em um certo arquivo <filename/Release/) ou para todas as versões de -pacotes que provenientes de um site Internet em particular, como -identificado pelo nome de domínio totalmente qualificado do site Internet. -</simpara> - -<simpara> -Essa entrada de forma geral no arquivo de preferências do APT -aplica-se somente a grupos de pacotes. Por exemplo, o registro a seguir -faz com que o APT atribua uma prioridade alta para todas as versões -de pacotes disponíveis no site local. -</simpara> - -<programlisting> -Package: * -Pin: origin "" -Pin-Priority: 999 -</programlisting> - -<simpara> -Uma nota de aviso : a palavra-chave usada aqui é "<literal/origin/". -Esta palavra não deve ser confundida com a origem ("Origin:") de uma -distribuição como especificado em um arquivo <filename/Release/. O que -segue a tag "Origin:" em um arquivo <filename/Release/ não é um endereço -de site Internet mas sim nome de autor ou distribuidor (vendor), como -"Debian" ou "Ximian". -</simpara> - -<simpara> -O registro a seguir atribui uma prioridade baixa para todas as versões -de pacote que pertençam a qualquer distribuição cujo nome do Repositório -seja "<literal/unstable/". -</simpara> - -<programlisting> -Package: * -Pin: release a=unstable -Pin-Priority: 50 -</programlisting> - -<simpara> -O registro a seguir atribui uma prioridade alta para todas as versões de -pacotes que pertençam a qualquer versão cujo nome do Repositório seja -"<literal/stable/" e cujo número de versão seja "<literal/3.0/". -</simpara> - -<programlisting> -Package: * -Pin: release a=unstable, v=3.0 -Pin-Priority: 50 -</programlisting> -</listitem> -</itemizedlist> -</para> - -</RefSect2> - -<RefSect2> -<Title>Como o APT Interpreta Prioridades - - -Prioridades (P) atribuídas no arquivo de preferências do APT devem ser -números inteiros positivos ou negativos. Eles são interpretados como a -seguir (a grosso modo): - - - -P > 1000 -faz com que uma instância seja instalada -mesmo caso isso constitua um dowgrade do pacote - - -990 < P <=1000 -faz com que uma versão seja instalada -mesmo caso a mesma não venha de uma versão alvo, -a menos que a versão instalada seja mais recente - - -500 < P <=990 -faz com que uma versão seja instalada -a menos que exista uma versão disponível pertencente a versão -alvo ou a versão instalada seja mais recente - - -100 < P <=500 -faz com que uma versão seja instalada -a menos que exista uma versão disponível pertencente a alguma -outra distribuição ou a versão instalada seja mais recente - -0 <= P <=100 -faz com que uma versão seja instalada -somente caso não exista uma versão instalada do pacote - - -P < 0 -impede a versão de ser instalada - - - - - -Caso um dos registro de forma específica descritos acima case (match) com -uma versão disponível do pacote então o primeiro desses registros -encontrados determinará a prioridade da versão do pacote. Na falha desse -cenário, caso quaisquer registros de forma genérica casem (match) com uma -versão do pacote disponível então o primeiro desses registros encontrado -determinará a prioridade da versão do pacote. - - - -Por exemplo, suponha que o arquivo de preferências do APT contenha -os três registros apresentados anteriormente : - - -Package: perl -Pin: version 5.8* -Pin-Priority: 1001 - -Package: * -Pin: origin "" -Pin-Priority: 999 - -Package: * -Pin: release unstable -Pin-Priority: 50 - - -Então : - - -A versão mais recente disponível do pacote - -Uma versão de qualquer pacote diferente de - -Uma versão de um pacote cuja origem não seja o sistema -local mas sim algum outro site listado no arquivo &sources-list; e que -pertença a uma distribuição - - - - - -Determinação da Versão do Pacote e Propriedades da Distribuição - - -As localidades listadas em um arquivo &sources-list; devem fornecer -arquivos Packages e Release para -descrever os pacotes disponíveis nessas localidades. - - - -O arquivo Packages é normalmente encontrado no -diretório .../dists/nome-distribuição/componente/arquitetura : -por exemplo, .../dists/stable/main/binary-i386/Packages. -O arquivo consiste de uma série de registros de múltiplas linhas, uma para -cada pacote disponível no diretório. Somente duas linhas em cada registro -são relevantes para definir prioridades do APT : - - -a linha -informa o nome do pacote - - -a linha -informa o número de versão do pacote - - - - - -O arquivo Release é normalmente encontrado no -diretório -.../dists/nome-distribuição : -por exemplo, .../dists/stable/Release, -ou .../dists/woody/Release. -O arquivo consiste de um registro de múltiplas linhas o qual se aplica a - - -a linha -dá nome ao repositório para o qual todos os pacotes -na àrvore de diretório pertencem. Por exemplo, a linha -"Archive: stable" -especifica que todos os pacotes na àrvore de diretório -abaixo do diretório pai do arquivo - -Pin: release a=stable - - - - - -a linha -dá nome a versão da distribuição. Por exemplo, os -pacote na àrvore podem pertencer a distribuição Debian GNU/Linux versão -3.0. Note que normalmente não existe número de versão para as -distribuições - - -Pin: release v=3.0 -Pin: release a=stable v=3.0 -Pin: release 3.0 - - - - - - -a linha -dá nome ao componente de licenciamento associado com -os pacotes na àrvore de diretório do arquivo - -Pin: release c=main - - - - - -a linha -dá nome ao produtor dos pacotes na àrvore de diretório -do arquivo - -Pin: release o=Debian - - - - - -a linha -dá nome ao rótulo (label) dos pacotes na árvore de -diretório. O mais comum é esse valor ser - -Pin: release l=Debian - - - - - - - -Todos os arquivos Packages e -Release obtidos das localidades listadas no arquivo -&sources-list; são mantidos no diretório -/var/lib/apt/lists ou no arquivo indicado pela variável -debian.lcs.mit.edu_debian_dists_unstable_contrib_binary-i386_Release -contém o arquivo Release obtido do site - - - - - -Linhas Opcionais em um Registro de Preferências do APT - - -Cada registro em um arquivo de preferências do APT pode opcionalmente -iniciar com uma ou mais linhas iniciadas com a palavra - - - -A linha - - - - -Exemplos - -Acompanhando a Stable - - -O arquivo de preferências do APT a seguir fará com que o APT atribua uma -prioridade maior do que a prioridade padrão (500) para todas as versões -de pacotes pertencentes a distribuição -Explanation: Desinstala ou não instala nenhuma versão de pacote originada -Explanation: do Debian a não ser aquelas na distribuição stable -Package: * -Pin: release a=stable -Pin-Priority: 900 - -Package: * -Pin: release o=Debian -Pin-Priority: -10 - - - - -Com um arquivo &sources-list; apropriado e o arquivo de preferências -acima, quaisquer um dos comandos a seguir farão com que o APT atualize -para a(s) ulítma(s) versão(ôes) -apt-get install nome-pacote -apt-get upgrade -apt-get dist-upgrade - - - - -O comando a seguir fará com que o APT atualize o pacote -especificado para a última versão da distribuição -apt-get install pacote/testing - - - - -Acompanhando a Testing - - -O arquivo de preferências do APT a seguir fará com que o APT atribua uma -prioridade maior para versões de pacote da distribuição -Package: * -Pin: release a=testing -Pin-Priority: 900 - -Package: * -Pin: release a=unstable -Pin-Priority: 800 - -Package: * -Pin: release o=Debian -Pin-Priority: -10 - - - - -Com um arquivo &sources-list; adequado e o arquivo de preferências do APT -acima, quaisquer dos comandos a seguir farão com que o APT atualize para -a(s) última(s) versão(ões) -apt-get install nome-pacote -apt-get upgrade -apt-get dist-upgrade - - - - -O comando a seguir fará com que o APT atualize o pacote especificado para -a última versão da distribuição apt-get upgrade irá atualizar o pacote para a versão - -apt-get install pacote/unstable - - - - - - - -Consulte também - -&apt-get; &apt-cache; &apt-conf; &sources-list; - - - - &manbugs; - &manauthor; - &ptbr-mantranslator; -- cgit v1.2.3 From 93517da394859666e4af08f518dfb95c4ac271dd Mon Sep 17 00:00:00 2001 From: David Kalnischkies Date: Mon, 2 Nov 2009 10:26:52 +0100 Subject: fix/simplify buildsystem for the (now) po4a-only manpages --- doc/es/makefile | 9 ++++----- doc/makefile | 8 -------- doc/pt_BR/makefile | 7 ++++--- 3 files changed, 8 insertions(+), 16 deletions(-) (limited to 'doc') diff --git a/doc/es/makefile b/doc/es/makefile index 81a410c5c..0b5b52222 100644 --- a/doc/es/makefile +++ b/doc/es/makefile @@ -5,8 +5,7 @@ SUBDIR=doc/es # Bring in the default rules include ../../buildlib/defaults.mak -# Man pages -SOURCE = apt-cache.es.8 apt-get.es.8 apt-cdrom.es.8 apt.conf.es.5 \ - sources.list.es.5 apt-config.es.8 apt_preferences.es.5 -INCLUDES = apt.ent.es -include $(SGML_MANPAGE_H) +# Language Code of this translation +LC=es + +include $(PO4A_MANPAGE_H) diff --git a/doc/makefile b/doc/makefile index 0cb135c7b..fe53aba48 100644 --- a/doc/makefile +++ b/doc/makefile @@ -43,14 +43,6 @@ veryclean-subdirs: for dir in $(SUBDIRS); do\ $(MAKE) -C $$dir veryclean; \ done - # FIXME remove created sgml files, but preserve all - # which are "left over" from older systems. - # After completing the transition this should be handled - # in the po4a-manpage makefile for all translations - for dir in $(subst /addendum/,, $(dir $(wildcard */addendum/*))); do\ - rm -f $$dir/offline.$$dir.sgml; \ - rm -f $$dir/guide.$$dir.sgml; \ - done ifdef PO4A doc: po4a diff --git a/doc/pt_BR/makefile b/doc/pt_BR/makefile index 4c9ea6293..6e485bbf6 100644 --- a/doc/pt_BR/makefile +++ b/doc/pt_BR/makefile @@ -5,6 +5,7 @@ SUBDIR=doc/pt_BR # Bring in the default rules include ../../buildlib/defaults.mak -SOURCE = apt_preferences.pt_BR.5 -INCLUDES = apt.ent.pt_BR -include $(SGML_MANPAGE_H) +# Language Code of this translation +LC=pt_BR + +include $(PO4A_MANPAGE_H) -- cgit v1.2.3 From e46a23a59689c917ad3e589a84add9fdfa498159 Mon Sep 17 00:00:00 2001 From: David Kalnischkies Date: Mon, 2 Nov 2009 17:54:22 +0100 Subject: remove traces of old manpage-buildsystems --- doc/makefile | 36 ++++++++++++++++++++++++++++-------- 1 file changed, 28 insertions(+), 8 deletions(-) (limited to 'doc') diff --git a/doc/makefile b/doc/makefile index fe53aba48..6fb604e4e 100644 --- a/doc/makefile +++ b/doc/makefile @@ -11,13 +11,34 @@ SOURCE = $(wildcard *.sgml) DEBIANDOC_HTML_OPTIONS=-l en include $(DEBIANDOC_H) -# XML man pages -SOURCE = apt-cache.8 apt-get.8 apt-cdrom.8 apt.conf.5 sources.list.5 \ - apt-config.8 apt_preferences.5 \ - apt-sortpkgs.1 apt-ftparchive.1 apt-extracttemplates.1 \ - apt-key.8 apt-secure.8 apt-mark.8 -INCLUDES = apt.ent -include $(XML_MANPAGE_H) +# Do not use XMLTO, build the manpages directly with XSLTPROC +ifdef XSLTPROC +# generate a list of accepted man page translations +SOURCE = $(patsubst %.xml,%,$(wildcard *.?.xml)) +INCLUDES = apt.ent +STYLESHEET=manpage-style.xsl + +LOCAL := manpage-$(firstword $(SOURCE)) +$(LOCAL)-LIST := $(SOURCE) + +# Install generation hooks +doc: $($(LOCAL)-LIST) +veryclean: veryclean/$(LOCAL) + +$($(LOCAL)-LIST) :: % : %.xml $(INCLUDES) + echo Creating man page $@ + $(XSLTPROC) -o $@ $(STYLESHEET) $< + +# Clean rule +.PHONY: veryclean/$(LOCAL) +veryclean/$(LOCAL): + -rm -rf $($(@F)-LIST) + +endif + +# Chain to the manpage rule +SOURCE = apt.8 +include $(MANPAGE_H) # Examples SOURCE = examples/apt.conf examples/sources.list examples/configure-index examples/apt-https-method-example.conf @@ -78,5 +99,4 @@ $(BUILD)/doc/doxygen-stamp: $(DOXYGEN_SOURCES) $(BUILD)/doc/Doxyfile touch $(BUILD)/doc/doxygen-stamp doc: $(BUILD)/doc/doxygen-stamp - endif -- cgit v1.2.3 From 9d20d8c8eb99ff85d082956813c3d624132d5399 Mon Sep 17 00:00:00 2001 From: Michael Vogt Date: Thu, 10 Dec 2009 21:48:54 +0100 Subject: merged -r 1920..1922 from lp:~donkult/apt/sid --- doc/apt-ftparchive.1.xml | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'doc') diff --git a/doc/apt-ftparchive.1.xml b/doc/apt-ftparchive.1.xml index d4d77c68e..d47df957a 100644 --- a/doc/apt-ftparchive.1.xml +++ b/doc/apt-ftparchive.1.xml @@ -15,7 +15,7 @@ &apt-email; &apt-product; - 29 February 2004 + 17 August 2009 @@ -543,7 +543,16 @@ for i in Sections do Make the caching databases read only. Configuration Item: APT::FTPArchive::ReadOnlyDB. - + + + + This configuration option defaults to "true" and should only be set to + "false" if the Archive generated with &apt-ftparchive; also provides + Translation files. Note that it is currently not possible to create these + files with apt-ftparchive. + + + &apt-commonoptions; -- cgit v1.2.3 From a0895a74fe95997a5d75e5b54c95afb9594554f6 Mon Sep 17 00:00:00 2001 From: Michael Vogt Date: Thu, 10 Dec 2009 21:59:49 +0100 Subject: merged -r 1923..1926 from lp:~donkult/apt/sid --- doc/po/es.po | 387 ++++++++++++++++++++++++++++++++++---------------------- doc/po/it.po | 380 +++++++++++++++++++++++++++++++++---------------------- doc/po/pl.po | 380 +++++++++++++++++++++++++++++++++---------------------- doc/po/pt_BR.po | 383 +++++++++++++++++++++++++++++++++---------------------- 4 files changed, 927 insertions(+), 603 deletions(-) (limited to 'doc') diff --git a/doc/po/es.po b/doc/po/es.po index 271998320..266f69c02 100644 --- a/doc/po/es.po +++ b/doc/po/es.po @@ -14,7 +14,7 @@ msgid "" msgstr "" "Project-Id-Version: apt\n" -"POT-Creation-Date: 2009-11-01 00:19+0100\n" +"POT-Creation-Date: 2009-11-27 00:05+0100\n" "PO-Revision-Date: 2004-09-20 17:05+0000\n" "Last-Translator: Rubén Porras Campo \n" "Language-Team: \n" @@ -814,7 +814,7 @@ msgstr "" #. The last update date #. type: Content of: #: apt-cache.8.xml:13 apt-config.8.xml:13 apt-extracttemplates.1.xml:13 -#: apt-ftparchive.1.xml:13 apt-sortpkgs.1.xml:13 sources.list.5.xml:13 +#: apt-sortpkgs.1.xml:13 sources.list.5.xml:13 msgid "" "&apt-author.jgunthorpe; &apt-author.team; &apt-email; &apt-product; 29 " "February 2004" @@ -1494,7 +1494,7 @@ msgstr "" #. type: Content of: #: apt-cache.8.xml:281 apt-config.8.xml:93 apt-extracttemplates.1.xml:56 #: apt-ftparchive.1.xml:492 apt-get.8.xml:319 apt-mark.8.xml:89 -#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:456 apt.conf.5.xml:478 +#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:484 apt.conf.5.xml:506 #, fuzzy msgid "options" msgstr "Opciones" @@ -1759,7 +1759,7 @@ msgstr "" #. type: Content of: #: apt-cache.8.xml:356 apt-cdrom.8.xml:150 apt-config.8.xml:98 -#: apt-extracttemplates.1.xml:67 apt-ftparchive.1.xml:547 apt-get.8.xml:554 +#: apt-extracttemplates.1.xml:67 apt-ftparchive.1.xml:556 apt-get.8.xml:554 #: apt-sortpkgs.1.xml:64 #, fuzzy msgid "&apt-commonoptions;" @@ -1770,7 +1770,7 @@ msgstr "" #. type: Content of: #: apt-cache.8.xml:361 apt-get.8.xml:559 apt-key.8.xml:138 apt-mark.8.xml:122 -#: apt.conf.5.xml:988 apt_preferences.5.xml:615 +#: apt.conf.5.xml:1017 apt_preferences.5.xml:615 #, fuzzy msgid "Files" msgstr "Ficheros" @@ -1782,9 +1782,9 @@ msgstr "" #. type: Content of: <refentry><refsect1><title> #: apt-cache.8.xml:368 apt-cdrom.8.xml:155 apt-config.8.xml:103 -#: apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:563 apt-get.8.xml:569 +#: apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:572 apt-get.8.xml:569 #: apt-key.8.xml:162 apt-mark.8.xml:133 apt-secure.8.xml:181 -#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:994 apt_preferences.5.xml:622 +#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:1023 apt_preferences.5.xml:622 #: sources.list.5.xml:233 #, fuzzy msgid "See Also" @@ -1831,7 +1831,7 @@ msgstr "&apt-conf;, &sources-list;, &apt-get;" #. type: Content of: <refentry><refsect1><title> #: apt-cache.8.xml:373 apt-cdrom.8.xml:160 apt-config.8.xml:108 -#: apt-extracttemplates.1.xml:78 apt-ftparchive.1.xml:567 apt-get.8.xml:575 +#: apt-extracttemplates.1.xml:78 apt-ftparchive.1.xml:576 apt-get.8.xml:575 #: apt-mark.8.xml:137 apt-sortpkgs.1.xml:73 #, fuzzy msgid "Diagnostics" @@ -2257,7 +2257,7 @@ msgid "Just show the contents of the configuration space." msgstr "Sólo muestra el contenido del espacio de configuración." #. type: Content of: <refentry><refsect1><para> -#: apt-config.8.xml:104 apt-extracttemplates.1.xml:75 apt-ftparchive.1.xml:564 +#: apt-config.8.xml:104 apt-extracttemplates.1.xml:75 apt-ftparchive.1.xml:573 #: apt-sortpkgs.1.xml:70 #, fuzzy msgid "&apt-conf;" @@ -2362,6 +2362,14 @@ msgstr "" "apt devuelve cero cuando no ocurre ningún error. Si hay algún error devuelve " "el valor 100." +#. The last update date +#. type: Content of: <refentry><refentryinfo> +#: apt-ftparchive.1.xml:13 +msgid "" +"&apt-author.jgunthorpe; &apt-author.team; &apt-email; &apt-product; <date>17 " +"August 2009</date>" +msgstr "" + #. type: Content of: <refentry><refnamediv><refname> #: apt-ftparchive.1.xml:22 apt-ftparchive.1.xml:29 #, fuzzy @@ -3259,28 +3267,44 @@ msgstr "" "Sólo busca en los nombres de paquetes, no en las descripciones largas. " "Opción de configuración: <literal>APT::Cache::NamesOnly</literal>." +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:547 +#, fuzzy +msgid "<option>APT::FTPArchive::LongDescription</option>" +msgstr "<option>--all-versions</option>" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:549 +msgid "" +"This configuration option defaults to \"<literal>true</literal>\" and should " +"only be set to <literal>\"false\"</literal> if the Archive generated with " +"&apt-ftparchive; also provides <filename>Translation</filename> files. Note " +"that it is currently not possible to create these files with <command>apt-" +"ftparchive</command>." +msgstr "" + #. type: Content of: <refentry><refsect1><title> -#: apt-ftparchive.1.xml:552 apt.conf.5.xml:982 apt_preferences.5.xml:462 +#: apt-ftparchive.1.xml:561 apt.conf.5.xml:1011 apt_preferences.5.xml:462 #: sources.list.5.xml:193 #, fuzzy msgid "Examples" msgstr "Ejemplos" #. type: Content of: <refentry><refsect1><para><programlisting> -#: apt-ftparchive.1.xml:558 +#: apt-ftparchive.1.xml:567 #, no-wrap msgid "<command>apt-ftparchive</command> packages <replaceable>directory</replaceable> | <command>gzip</command> > <filename>Packages.gz</filename>\n" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt-ftparchive.1.xml:554 +#: apt-ftparchive.1.xml:563 msgid "" "To create a compressed Packages file for a directory containing binary " "packages (.deb): <placeholder type=\"programlisting\" id=\"0\"/>" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt-ftparchive.1.xml:568 +#: apt-ftparchive.1.xml:577 #, fuzzy msgid "" "<command>apt-ftparchive</command> returns zero on normal operation, decimal " @@ -5704,7 +5728,7 @@ msgstr "" "Nota: Squid 2.0.2 no soporta ninguna de estas opciones." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:264 apt.conf.5.xml:321 +#: apt.conf.5.xml:264 apt.conf.5.xml:328 #, fuzzy msgid "" "The option <literal>timeout</literal> sets the timeout timer used by the " @@ -5745,22 +5769,32 @@ msgid "" "multiple servers at the same time.)" msgstr "" +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:280 +msgid "" +"<literal>Acquire::http::User-Agent</literal> can be used to set a different " +"User-Agent for the http download method as some proxies allow access for " +"clients only if the client uses a known identifier." +msgstr "" + #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:281 +#: apt.conf.5.xml:286 #, fuzzy msgid "https" msgstr "http" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:282 +#: apt.conf.5.xml:287 msgid "" -"HTTPS URIs. Cache-control and proxy options are the same as for " -"<literal>http</literal> method. <literal>Pipeline-Depth</literal> option is " +"HTTPS URIs. Cache-control, Timeout, AllowRedirect, Dl-Limit and proxy " +"options are the same as for <literal>http</literal> method and will also " +"default to the options from the <literal>http</literal> method if they are " +"not explicitly set for https. <literal>Pipeline-Depth</literal> option is " "not supported yet." msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:286 +#: apt.conf.5.xml:293 msgid "" "<literal>CaInfo</literal> suboption specifies place of file that holds info " "about trusted certificates. <literal><host>::CaInfo</literal> is " @@ -5781,13 +5815,13 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:304 sources.list.5.xml:150 +#: apt.conf.5.xml:311 sources.list.5.xml:150 #, fuzzy msgid "ftp" msgstr "ftp" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:305 +#: apt.conf.5.xml:312 #, fuzzy msgid "" "FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the standard " @@ -5819,7 +5853,7 @@ msgstr "" "de la URI correspondiente." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:324 +#: apt.conf.5.xml:331 #, fuzzy msgid "" "Several settings are provided to control passive mode. Generally it is safe " @@ -5836,7 +5870,7 @@ msgstr "" "fichero de configuración de muestra para ver ejemplos)." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:331 +#: apt.conf.5.xml:338 #, fuzzy msgid "" "It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</" @@ -5851,7 +5885,7 @@ msgstr "" "eficiencia." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:336 +#: apt.conf.5.xml:343 #, fuzzy msgid "" "The setting <literal>ForceExtended</literal> controls the use of RFC2428 " @@ -5867,19 +5901,19 @@ msgstr "" "la mayoría de los servidores FTP no soportan RFC2428." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:343 sources.list.5.xml:132 +#: apt.conf.5.xml:350 sources.list.5.xml:132 #, fuzzy msgid "cdrom" msgstr "apt-cdrom" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:349 +#: apt.conf.5.xml:356 #, no-wrap msgid "/cdrom/::Mount \"foo\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:344 +#: apt.conf.5.xml:351 #, fuzzy msgid "" "CDROM URIs; the only setting for CDROM URIs is the mount point, " @@ -5899,12 +5933,12 @@ msgstr "" "antiguas). Respecto a la sintaxis se pone" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:354 +#: apt.conf.5.xml:361 msgid "gpgv" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:355 +#: apt.conf.5.xml:362 msgid "" "GPGV URIs; the only option for GPGV URIs is the option to pass additional " "parameters to gpgv. <literal>gpgv::Options</literal> Additional options " @@ -5912,18 +5946,18 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:360 +#: apt.conf.5.xml:367 msgid "CompressionTypes" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:366 +#: apt.conf.5.xml:373 #, no-wrap msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:361 +#: apt.conf.5.xml:368 msgid "" "List of compression types which are understood by the acquire methods. " "Files like <filename>Packages</filename> can be available in various " @@ -5935,19 +5969,19 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:371 +#: apt.conf.5.xml:378 #, no-wrap msgid "Acquire::CompressionTypes::Order:: \"gz\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:374 +#: apt.conf.5.xml:381 #, no-wrap msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:367 +#: apt.conf.5.xml:374 msgid "" "Also the <literal>Order</literal> subgroup can be used to define in which " "order the acquire system will try to download the compressed files. The " @@ -5964,13 +5998,13 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:378 +#: apt.conf.5.xml:385 #, no-wrap msgid "Dir::Bin::bzip2 \"/bin/bzip2\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:376 +#: apt.conf.5.xml:383 msgid "" "Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</" "replaceable></literal> will be checked: If this setting exists the method " @@ -5985,7 +6019,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:383 +#: apt.conf.5.xml:390 msgid "" "While it is possible to add an empty compression type to the order list, but " "APT in its current version doesn't understand it correctly and will display " @@ -5994,6 +6028,53 @@ msgid "" "prefer uncompressed files to support the usage of local mirrors." msgstr "" +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:396 +msgid "Languages" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:397 +msgid "" +"The Languages subsection controls which <filename>Translation</filename> " +"files are downloaded and in which order APT tries to display the Description-" +"Translations. APT will try to display the first available Description for " +"the Language which is listed at first. Languages can be defined with their " +"short or long Languagecodes. Note that not all archives provide " +"<filename>Translation</filename> files for every Language - especially the " +"long Languagecodes are rare, so please inform you which ones are available " +"before you set here impossible values." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><programlisting> +#: apt.conf.5.xml:413 +#, no-wrap +msgid "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; };" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:403 +msgid "" +"The default list includes \"environment\" and \"en\". " +"\"<literal>environment</literal>\" has a special meaning here: It will be " +"replaced at runtime with the languagecodes extracted from the " +"<literal>LC_MESSAGES</literal> enviroment variable. It will also ensure " +"that these codes are not included twice in the list. If " +"<literal>LC_MESSAGES</literal> is set to \"C\" only the " +"<filename>Translation-en</filename> file (if available) will be used. To " +"force apt to use no Translation file use the setting <literal>Acquire::" +"Languages=none</literal>. \"<literal>none</literal>\" is another special " +"meaning code which will stop the search for a fitting <filename>Translation</" +"filename> file. This can be used by the system administrator to let APT " +"know that it should download also this files without actually use them if " +"not the environment specifies this languages. So the following example " +"configuration will result in the order \"en, de\" in an english and in \"de, " +"en\" in a german localization. Note that \"fr\" is downloaded, but not used " +"if APT is not used in a french localization, in such an environment the " +"order would be \"fr, de, en\". <placeholder type=\"programlisting\" id=\"0" +"\"/>" +msgstr "" + #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:217 #, fuzzy @@ -6005,13 +6086,13 @@ msgstr "" "paquetes y los manejadores de URI." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:392 +#: apt.conf.5.xml:420 #, fuzzy msgid "Directories" msgstr "Directorios" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:394 +#: apt.conf.5.xml:422 #, fuzzy msgid "" "The <literal>Dir::State</literal> section has directories that pertain to " @@ -6032,7 +6113,7 @@ msgstr "" "filename> o <filename>./</filename>." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:401 +#: apt.conf.5.xml:429 #, fuzzy msgid "" "<literal>Dir::Cache</literal> contains locations pertaining to local cache " @@ -6054,7 +6135,7 @@ msgstr "" "literal> el directorio predeterminado está en <literal>Dir::Cache</literal>" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:410 +#: apt.conf.5.xml:438 #, fuzzy msgid "" "<literal>Dir::Etc</literal> contains the location of configuration files, " @@ -6071,7 +6152,7 @@ msgstr "" "envar>)." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:416 +#: apt.conf.5.xml:444 #, fuzzy msgid "" "The <literal>Dir::Parts</literal> setting reads in all the config fragments " @@ -6083,7 +6164,7 @@ msgstr "" "esto se carga el fichero principal de configuración." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:420 +#: apt.conf.5.xml:448 #, fuzzy msgid "" "Binary programs are pointed to by <literal>Dir::Bin</literal>. <literal>Dir::" @@ -6101,7 +6182,7 @@ msgstr "" "respectivos programas." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:428 +#: apt.conf.5.xml:456 msgid "" "The configuration item <literal>RootDir</literal> has a special meaning. If " "set, all paths in <literal>Dir::</literal> will be relative to " @@ -6114,13 +6195,13 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:441 +#: apt.conf.5.xml:469 #, fuzzy msgid "APT in DSelect" msgstr "APT con DSelect" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:443 +#: apt.conf.5.xml:471 #, fuzzy msgid "" "When APT is used as a &dselect; method several configuration directives " @@ -6132,13 +6213,13 @@ msgstr "" "la sección <literal>DSelect</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:447 +#: apt.conf.5.xml:475 #, fuzzy msgid "Clean" msgstr "clean" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:448 +#: apt.conf.5.xml:476 #, fuzzy msgid "" "Cache Clean mode; this value may be one of always, prompt, auto, pre-auto " @@ -6156,7 +6237,7 @@ msgstr "" "descargar los paquetes nuevos." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:457 +#: apt.conf.5.xml:485 #, fuzzy msgid "" "The contents of this variable is passed to &apt-get; as command line options " @@ -6166,13 +6247,13 @@ msgstr "" "ordenes cuando se ejecuta en la fase de instalación." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:461 +#: apt.conf.5.xml:489 #, fuzzy msgid "Updateoptions" msgstr "Opciones" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:462 +#: apt.conf.5.xml:490 #, fuzzy msgid "" "The contents of this variable is passed to &apt-get; as command line options " @@ -6182,13 +6263,13 @@ msgstr "" "ordenes cuando se ejecuta en la fase de actualización." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:466 +#: apt.conf.5.xml:494 #, fuzzy msgid "PromptAfterUpdate" msgstr "PromptAfterUpdate" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:467 +#: apt.conf.5.xml:495 #, fuzzy msgid "" "If true the [U]pdate operation in &dselect; will always prompt to continue. " @@ -6198,13 +6279,13 @@ msgstr "" "continuar. Por omisión sólo pregunta en caso de error." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:473 +#: apt.conf.5.xml:501 #, fuzzy msgid "How APT calls dpkg" msgstr "Como APT llama a dpkg" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:474 +#: apt.conf.5.xml:502 #, fuzzy msgid "" "Several configuration directives control how APT invokes &dpkg;. These are " @@ -6214,7 +6295,7 @@ msgstr "" "encuentran en la sección <literal>DPkg</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:479 +#: apt.conf.5.xml:507 #, fuzzy msgid "" "This is a list of options to pass to dpkg. The options must be specified " @@ -6226,19 +6307,19 @@ msgstr "" "como un sólo argumento." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:484 +#: apt.conf.5.xml:512 #, fuzzy msgid "Pre-Invoke" msgstr "Pre-Invoke" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:484 +#: apt.conf.5.xml:512 #, fuzzy msgid "Post-Invoke" msgstr "Post-Invoke" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:485 +#: apt.conf.5.xml:513 #, fuzzy msgid "" "This is a list of shell commands to run before/after invoking &dpkg;. Like " @@ -6252,13 +6333,13 @@ msgstr "" "si alguna falla APT abortará." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:491 +#: apt.conf.5.xml:519 #, fuzzy msgid "Pre-Install-Pkgs" msgstr "Pre-Install-Pkgs" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:492 +#: apt.conf.5.xml:520 #, fuzzy msgid "" "This is a list of shell commands to run before invoking dpkg. Like " @@ -6274,7 +6355,7 @@ msgstr "" "todos los .deb que va ha instalar por la entrada estándar, uno por línea." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:498 +#: apt.conf.5.xml:526 #, fuzzy msgid "" "Version 2 of this protocol dumps more information, including the protocol " @@ -6290,13 +6371,13 @@ msgstr "" "dada a <literal>Pre-Install-Pkgs</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:505 +#: apt.conf.5.xml:533 #, fuzzy msgid "Run-Directory" msgstr "Run-Directory" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:506 +#: apt.conf.5.xml:534 #, fuzzy msgid "" "APT chdirs to this directory before invoking dpkg, the default is <filename>/" @@ -6306,13 +6387,13 @@ msgstr "" "omisión es <filename>/</filename>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:510 +#: apt.conf.5.xml:538 #, fuzzy msgid "Build-options" msgstr "Opciones" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:511 +#: apt.conf.5.xml:539 #, fuzzy msgid "" "These options are passed to &dpkg-buildpackage; when compiling packages, the " @@ -6323,12 +6404,12 @@ msgstr "" "binarios." #. type: Content of: <refentry><refsect1><refsect2><title> -#: apt.conf.5.xml:516 +#: apt.conf.5.xml:544 msgid "dpkg trigger usage (and related options)" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:517 +#: apt.conf.5.xml:545 msgid "" "APT can call dpkg in a way so it can make aggressive use of triggers over " "multiply calls of dpkg. Without further options dpkg will use triggers only " @@ -6343,7 +6424,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para><literallayout> -#: apt.conf.5.xml:532 +#: apt.conf.5.xml:560 #, no-wrap msgid "" "DPkg::NoTriggers \"true\";\n" @@ -6353,7 +6434,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:526 +#: apt.conf.5.xml:554 msgid "" "Note that it is not guaranteed that APT will support these options or that " "these options will not cause (big) trouble in the future. If you have " @@ -6367,12 +6448,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:538 +#: apt.conf.5.xml:566 msgid "DPkg::NoTriggers" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:539 +#: apt.conf.5.xml:567 msgid "" "Add the no triggers flag to all dpkg calls (except the ConfigurePending " "call). See &dpkg; if you are interested in what this actually means. In " @@ -6384,12 +6465,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:546 +#: apt.conf.5.xml:574 msgid "PackageManager::Configure" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:547 +#: apt.conf.5.xml:575 msgid "" "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " "and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default " @@ -6405,12 +6486,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:557 +#: apt.conf.5.xml:585 msgid "DPkg::ConfigurePending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:558 +#: apt.conf.5.xml:586 msgid "" "If this option is set apt will call <command>dpkg --configure --pending</" "command> to let dpkg handle all required configurations and triggers. This " @@ -6421,12 +6502,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:564 +#: apt.conf.5.xml:592 msgid "DPkg::TriggersPending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:565 +#: apt.conf.5.xml:593 msgid "" "Useful for <literal>smart</literal> configuration as a package which has " "pending triggers is not considered as <literal>installed</literal> and dpkg " @@ -6436,12 +6517,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:570 +#: apt.conf.5.xml:598 msgid "PackageManager::UnpackAll" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:571 +#: apt.conf.5.xml:599 msgid "" "As the configuration can be deferred to be done at the end by dpkg it can be " "tried to order the unpack series only by critical needs, e.g. by Pre-" @@ -6453,12 +6534,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:578 +#: apt.conf.5.xml:606 msgid "OrderList::Score::Immediate" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:586 +#: apt.conf.5.xml:614 #, no-wrap msgid "" "OrderList::Score {\n" @@ -6470,7 +6551,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:579 +#: apt.conf.5.xml:607 msgid "" "Essential packages (and there dependencies) should be configured immediately " "after unpacking. It will be a good idea to do this quite early in the " @@ -6484,12 +6565,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:599 +#: apt.conf.5.xml:627 msgid "Periodic and Archives options" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:600 +#: apt.conf.5.xml:628 msgid "" "<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups " "of options configure behavior of apt periodic updates, which is done by " @@ -6498,13 +6579,13 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:608 +#: apt.conf.5.xml:636 #, fuzzy msgid "Debug options" msgstr "Opciones" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:610 +#: apt.conf.5.xml:638 msgid "" "Enabling options in the <literal>Debug::</literal> section will cause " "debugging information to be sent to the standard error stream of the program " @@ -6515,7 +6596,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:621 +#: apt.conf.5.xml:649 msgid "" "<literal>Debug::pkgProblemResolver</literal> enables output about the " "decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</" @@ -6523,7 +6604,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:629 +#: apt.conf.5.xml:657 msgid "" "<literal>Debug::NoLocking</literal> disables all file locking. This can be " "used to run some operations (for instance, <literal>apt-get -s install</" @@ -6531,7 +6612,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:638 +#: apt.conf.5.xml:666 msgid "" "<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each " "time that <literal>apt</literal> invokes &dpkg;." @@ -6541,120 +6622,120 @@ msgstr "" #. motivating example, except I haven't a clue why you'd want #. to do this. #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:646 +#: apt.conf.5.xml:674 msgid "" "<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data " "in CDROM IDs." msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:656 +#: apt.conf.5.xml:684 msgid "A full list of debugging options to apt follows." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:661 +#: apt.conf.5.xml:689 #, fuzzy msgid "<literal>Debug::Acquire::cdrom</literal>" msgstr "La línea <literal>Archive:</literal> " #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:665 +#: apt.conf.5.xml:693 msgid "" "Print information related to accessing <literal>cdrom://</literal> sources." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:672 +#: apt.conf.5.xml:700 #, fuzzy msgid "<literal>Debug::Acquire::ftp</literal>" msgstr "La línea <literal>Archive:</literal> " #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:676 +#: apt.conf.5.xml:704 msgid "Print information related to downloading packages using FTP." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:683 +#: apt.conf.5.xml:711 #, fuzzy msgid "<literal>Debug::Acquire::http</literal>" msgstr "La línea <literal>Archive:</literal> " #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:687 +#: apt.conf.5.xml:715 msgid "Print information related to downloading packages using HTTP." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:694 +#: apt.conf.5.xml:722 #, fuzzy msgid "<literal>Debug::Acquire::https</literal>" msgstr "La línea <literal>Archive:</literal> " #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:698 +#: apt.conf.5.xml:726 msgid "Print information related to downloading packages using HTTPS." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:705 +#: apt.conf.5.xml:733 #, fuzzy msgid "<literal>Debug::Acquire::gpgv</literal>" msgstr "La línea <literal>Archive:</literal> " #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:709 +#: apt.conf.5.xml:737 msgid "" "Print information related to verifying cryptographic signatures using " "<literal>gpg</literal>." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:716 +#: apt.conf.5.xml:744 #, fuzzy msgid "<literal>Debug::aptcdrom</literal>" msgstr "La línea <literal>Version:</literal> " #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:720 +#: apt.conf.5.xml:748 msgid "" "Output information about the process of accessing collections of packages " "stored on CD-ROMs." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:727 +#: apt.conf.5.xml:755 #, fuzzy msgid "<literal>Debug::BuildDeps</literal>" msgstr "La línea <literal>Label:</literal> " #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:730 +#: apt.conf.5.xml:758 msgid "Describes the process of resolving build-dependencies in &apt-get;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:737 +#: apt.conf.5.xml:765 #, fuzzy msgid "<literal>Debug::Hashes</literal>" msgstr "La línea <literal>Label:</literal> " #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:740 +#: apt.conf.5.xml:768 msgid "" "Output each cryptographic hash that is generated by the <literal>apt</" "literal> libraries." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:747 +#: apt.conf.5.xml:775 #, fuzzy msgid "<literal>Debug::IdentCDROM</literal>" msgstr "La línea <literal>Label:</literal> " #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:750 +#: apt.conf.5.xml:778 msgid "" "Do not include information from <literal>statfs</literal>, namely the number " "of used and free blocks on the CD-ROM filesystem, when generating an ID for " @@ -6662,99 +6743,99 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:758 +#: apt.conf.5.xml:786 #, fuzzy msgid "<literal>Debug::NoLocking</literal>" msgstr "La línea <literal>Origin:</literal> " #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:761 +#: apt.conf.5.xml:789 msgid "" "Disable all file locking. For instance, this will allow two instances of " "<quote><literal>apt-get update</literal></quote> to run at the same time." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:769 +#: apt.conf.5.xml:797 #, fuzzy msgid "<literal>Debug::pkgAcquire</literal>" msgstr "La línea <literal>Archive:</literal> " #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:773 +#: apt.conf.5.xml:801 msgid "Log when items are added to or removed from the global download queue." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:780 +#: apt.conf.5.xml:808 #, fuzzy msgid "<literal>Debug::pkgAcquire::Auth</literal>" msgstr "La línea <literal>Archive:</literal> " #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:783 +#: apt.conf.5.xml:811 msgid "" "Output status messages and errors related to verifying checksums and " "cryptographic signatures of downloaded files." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:790 +#: apt.conf.5.xml:818 #, fuzzy msgid "<literal>Debug::pkgAcquire::Diffs</literal>" msgstr "La línea <literal>Archive:</literal> " #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:793 +#: apt.conf.5.xml:821 msgid "" "Output information about downloading and applying package index list diffs, " "and errors relating to package index list diffs." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:801 +#: apt.conf.5.xml:829 #, fuzzy msgid "<literal>Debug::pkgAcquire::RRed</literal>" msgstr "La línea <literal>Archive:</literal> " #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:805 +#: apt.conf.5.xml:833 msgid "" "Output information related to patching apt package lists when downloading " "index diffs instead of full indices." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:812 +#: apt.conf.5.xml:840 #, fuzzy msgid "<literal>Debug::pkgAcquire::Worker</literal>" msgstr "La línea <literal>Archive:</literal> " #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:816 +#: apt.conf.5.xml:844 msgid "" "Log all interactions with the sub-processes that actually perform downloads." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:823 +#: apt.conf.5.xml:851 msgid "<literal>Debug::pkgAutoRemove</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:827 +#: apt.conf.5.xml:855 msgid "" "Log events related to the automatically-installed status of packages and to " "the removal of unused packages." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:834 +#: apt.conf.5.xml:862 msgid "<literal>Debug::pkgDepCache::AutoInstall</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:837 +#: apt.conf.5.xml:865 msgid "" "Generate debug messages describing which packages are being automatically " "installed to resolve dependencies. This corresponds to the initial auto-" @@ -6764,12 +6845,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:848 +#: apt.conf.5.xml:876 msgid "<literal>Debug::pkgDepCache::Marker</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:851 +#: apt.conf.5.xml:879 msgid "" "Generate debug messages describing which package is marked as keep/install/" "remove while the ProblemResolver does his work. Each addition or deletion " @@ -6786,96 +6867,96 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:870 +#: apt.conf.5.xml:898 #, fuzzy msgid "<literal>Debug::pkgInitConfig</literal>" msgstr "La línea <literal>Version:</literal> " #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:873 +#: apt.conf.5.xml:901 msgid "Dump the default configuration to standard error on startup." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:880 +#: apt.conf.5.xml:908 #, fuzzy msgid "<literal>Debug::pkgDPkgPM</literal>" msgstr "La línea <literal>Package:</literal> " #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:883 +#: apt.conf.5.xml:911 msgid "" "When invoking &dpkg;, output the precise command line with which it is being " "invoked, with arguments separated by a single space character." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:891 +#: apt.conf.5.xml:919 msgid "<literal>Debug::pkgDPkgProgressReporting</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:894 +#: apt.conf.5.xml:922 msgid "" "Output all the data received from &dpkg; on the status file descriptor and " "any errors encountered while parsing it." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:901 +#: apt.conf.5.xml:929 #, fuzzy msgid "<literal>Debug::pkgOrderList</literal>" msgstr "La línea <literal>Origin:</literal> " #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:905 +#: apt.conf.5.xml:933 msgid "" "Generate a trace of the algorithm that decides the order in which " "<literal>apt</literal> should pass packages to &dpkg;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:913 +#: apt.conf.5.xml:941 #, fuzzy msgid "<literal>Debug::pkgPackageManager</literal>" msgstr "La línea <literal>Package:</literal> " #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:917 +#: apt.conf.5.xml:945 msgid "" "Output status messages tracing the steps performed when invoking &dpkg;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:924 +#: apt.conf.5.xml:952 #, fuzzy msgid "<literal>Debug::pkgPolicy</literal>" msgstr "La línea <literal>Label:</literal> " #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:928 +#: apt.conf.5.xml:956 msgid "Output the priority of each package list on startup." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:934 +#: apt.conf.5.xml:962 msgid "<literal>Debug::pkgProblemResolver</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:938 +#: apt.conf.5.xml:966 msgid "" "Trace the execution of the dependency resolver (this applies only to what " "happens when a complex dependency problem is encountered)." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:946 +#: apt.conf.5.xml:974 msgid "<literal>Debug::pkgProblemResolver::ShowScores</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:949 +#: apt.conf.5.xml:977 msgid "" "Display a list of all installed packages with their calculated score used by " "the pkgProblemResolver. The description of the package is the same as " @@ -6883,20 +6964,20 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:957 +#: apt.conf.5.xml:985 #, fuzzy msgid "<literal>Debug::sourceList</literal>" msgstr "La línea <literal>Version:</literal> " #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:961 +#: apt.conf.5.xml:989 msgid "" "Print information about the vendors read from <filename>/etc/apt/vendors." "list</filename>." msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:983 +#: apt.conf.5.xml:1012 #, fuzzy msgid "" "&configureindex; is a configuration file showing example values for all " @@ -6906,14 +6987,14 @@ msgstr "" "los valores predeterminados para todas las opciones posibles." #. type: Content of: <refentry><refsect1><variablelist> -#: apt.conf.5.xml:990 +#: apt.conf.5.xml:1019 #, fuzzy msgid "&file-aptconf;" msgstr "apt-cdrom" #. ? reading apt.conf #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:995 +#: apt.conf.5.xml:1024 #, fuzzy msgid "&apt-cache;, &apt-config;, &apt-preferences;." msgstr "&apt-cache; &apt-conf;" @@ -9827,7 +9908,8 @@ msgstr "" #~ " \n" #~ " <VarListEntry><term><option/-o/</><term><option/--option/</>\n" #~ " <ListItem><Para>\n" -#~ " Set a Configuration Option; This will set an arbitary configuration \n" +#~ " Set a Configuration Option; This will set an arbitary " +#~ "configuration \n" #~ " option. The syntax is <option>-o Foo::Bar=bar</>.\n" #~ " </VarListEntry>\n" #~ msgstr "" @@ -9846,7 +9928,8 @@ msgstr "" #~ " <ListItem><Para>\n" #~ " Especifica el fichero de configuración a usar.\n" #~ " El programa leerá el fichero de configuración por omisión y luego\n" -#~ " este otro. Lea &apt-conf; para más información acerca de la sintaxis.\n" +#~ " este otro. Lea &apt-conf; para más información acerca de la " +#~ "sintaxis.\n" #~ " </VarListEntry>\n" #~ " \n" #~ " <VarListEntry><term><option/-o/</><term><option/--option/</>\n" diff --git a/doc/po/it.po b/doc/po/it.po index 2722ca562..37cf5d078 100644 --- a/doc/po/it.po +++ b/doc/po/it.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" -"POT-Creation-Date: 2009-10-29 14:19+0100\n" +"POT-Creation-Date: 2009-11-27 00:05+0100\n" "PO-Revision-Date: 2003-04-26 23:26+0100\n" "Last-Translator: Traduzione di Eugenia Franzoni <eugenia@linuxcare.com>\n" "Language-Team: <debian-l10n-italian@lists.debian.org>\n" @@ -752,7 +752,7 @@ msgstr "" #. The last update date #. type: Content of: <refentry><refentryinfo> #: apt-cache.8.xml:13 apt-config.8.xml:13 apt-extracttemplates.1.xml:13 -#: apt-ftparchive.1.xml:13 apt-sortpkgs.1.xml:13 sources.list.5.xml:13 +#: apt-sortpkgs.1.xml:13 sources.list.5.xml:13 msgid "" "&apt-author.jgunthorpe; &apt-author.team; &apt-email; &apt-product; <date>29 " "February 2004</date>" @@ -1203,7 +1203,7 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt-cache.8.xml:281 apt-config.8.xml:93 apt-extracttemplates.1.xml:56 #: apt-ftparchive.1.xml:492 apt-get.8.xml:319 apt-mark.8.xml:89 -#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:456 apt.conf.5.xml:478 +#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:484 apt.conf.5.xml:506 msgid "options" msgstr "" @@ -1397,14 +1397,14 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist> #: apt-cache.8.xml:356 apt-cdrom.8.xml:150 apt-config.8.xml:98 -#: apt-extracttemplates.1.xml:67 apt-ftparchive.1.xml:547 apt-get.8.xml:554 +#: apt-extracttemplates.1.xml:67 apt-ftparchive.1.xml:556 apt-get.8.xml:554 #: apt-sortpkgs.1.xml:64 msgid "&apt-commonoptions;" msgstr "" #. type: Content of: <refentry><refsect1><title> #: apt-cache.8.xml:361 apt-get.8.xml:559 apt-key.8.xml:138 apt-mark.8.xml:122 -#: apt.conf.5.xml:988 apt_preferences.5.xml:615 +#: apt.conf.5.xml:1017 apt_preferences.5.xml:615 msgid "Files" msgstr "" @@ -1415,9 +1415,9 @@ msgstr "" #. type: Content of: <refentry><refsect1><title> #: apt-cache.8.xml:368 apt-cdrom.8.xml:155 apt-config.8.xml:103 -#: apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:563 apt-get.8.xml:569 +#: apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:572 apt-get.8.xml:569 #: apt-key.8.xml:162 apt-mark.8.xml:133 apt-secure.8.xml:181 -#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:994 apt_preferences.5.xml:622 +#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:1023 apt_preferences.5.xml:622 #: sources.list.5.xml:233 msgid "See Also" msgstr "" @@ -1429,7 +1429,7 @@ msgstr "" #. type: Content of: <refentry><refsect1><title> #: apt-cache.8.xml:373 apt-cdrom.8.xml:160 apt-config.8.xml:108 -#: apt-extracttemplates.1.xml:78 apt-ftparchive.1.xml:567 apt-get.8.xml:575 +#: apt-extracttemplates.1.xml:78 apt-ftparchive.1.xml:576 apt-get.8.xml:575 #: apt-mark.8.xml:137 apt-sortpkgs.1.xml:73 msgid "Diagnostics" msgstr "" @@ -1729,7 +1729,7 @@ msgid "Just show the contents of the configuration space." msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt-config.8.xml:104 apt-extracttemplates.1.xml:75 apt-ftparchive.1.xml:564 +#: apt-config.8.xml:104 apt-extracttemplates.1.xml:75 apt-ftparchive.1.xml:573 #: apt-sortpkgs.1.xml:70 msgid "&apt-conf;" msgstr "" @@ -1814,6 +1814,14 @@ msgid "" "decimal 100 on error." msgstr "" +#. The last update date +#. type: Content of: <refentry><refentryinfo> +#: apt-ftparchive.1.xml:13 +msgid "" +"&apt-author.jgunthorpe; &apt-author.team; &apt-email; &apt-product; <date>17 " +"August 2009</date>" +msgstr "" + #. type: Content of: <refentry><refnamediv><refname> #: apt-ftparchive.1.xml:22 apt-ftparchive.1.xml:29 msgid "apt-ftparchive" @@ -2672,27 +2680,42 @@ msgid "" "FTPArchive::ReadOnlyDB</literal>." msgstr "" +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:547 +msgid "<option>APT::FTPArchive::LongDescription</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:549 +msgid "" +"This configuration option defaults to \"<literal>true</literal>\" and should " +"only be set to <literal>\"false\"</literal> if the Archive generated with " +"&apt-ftparchive; also provides <filename>Translation</filename> files. Note " +"that it is currently not possible to create these files with <command>apt-" +"ftparchive</command>." +msgstr "" + #. type: Content of: <refentry><refsect1><title> -#: apt-ftparchive.1.xml:552 apt.conf.5.xml:982 apt_preferences.5.xml:462 +#: apt-ftparchive.1.xml:561 apt.conf.5.xml:1011 apt_preferences.5.xml:462 #: sources.list.5.xml:193 msgid "Examples" msgstr "" #. type: Content of: <refentry><refsect1><para><programlisting> -#: apt-ftparchive.1.xml:558 +#: apt-ftparchive.1.xml:567 #, no-wrap msgid "<command>apt-ftparchive</command> packages <replaceable>directory</replaceable> | <command>gzip</command> > <filename>Packages.gz</filename>\n" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt-ftparchive.1.xml:554 +#: apt-ftparchive.1.xml:563 msgid "" "To create a compressed Packages file for a directory containing binary " "packages (.deb): <placeholder type=\"programlisting\" id=\"0\"/>" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt-ftparchive.1.xml:568 +#: apt-ftparchive.1.xml:577 msgid "" "<command>apt-ftparchive</command> returns zero on normal operation, decimal " "100 on error." @@ -4586,7 +4609,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:264 apt.conf.5.xml:321 +#: apt.conf.5.xml:264 apt.conf.5.xml:328 msgid "" "The option <literal>timeout</literal> sets the timeout timer used by the " "method, this applies to all things including connection timeout and data " @@ -4615,21 +4638,31 @@ msgid "" "multiple servers at the same time.)" msgstr "" +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:280 +msgid "" +"<literal>Acquire::http::User-Agent</literal> can be used to set a different " +"User-Agent for the http download method as some proxies allow access for " +"clients only if the client uses a known identifier." +msgstr "" + #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:281 +#: apt.conf.5.xml:286 msgid "https" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:282 +#: apt.conf.5.xml:287 msgid "" -"HTTPS URIs. Cache-control and proxy options are the same as for " -"<literal>http</literal> method. <literal>Pipeline-Depth</literal> option is " +"HTTPS URIs. Cache-control, Timeout, AllowRedirect, Dl-Limit and proxy " +"options are the same as for <literal>http</literal> method and will also " +"default to the options from the <literal>http</literal> method if they are " +"not explicitly set for https. <literal>Pipeline-Depth</literal> option is " "not supported yet." msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:286 +#: apt.conf.5.xml:293 msgid "" "<literal>CaInfo</literal> suboption specifies place of file that holds info " "about trusted certificates. <literal><host>::CaInfo</literal> is " @@ -4650,12 +4683,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:304 sources.list.5.xml:150 +#: apt.conf.5.xml:311 sources.list.5.xml:150 msgid "ftp" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:305 +#: apt.conf.5.xml:312 msgid "" "FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the standard " "form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. Per host " @@ -4674,7 +4707,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:324 +#: apt.conf.5.xml:331 msgid "" "Several settings are provided to control passive mode. Generally it is safe " "to leave passive mode on, it works in nearly every environment. However " @@ -4684,7 +4717,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:331 +#: apt.conf.5.xml:338 msgid "" "It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</" "envar> environment variable to a http url - see the discussion of the http " @@ -4693,7 +4726,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:336 +#: apt.conf.5.xml:343 msgid "" "The setting <literal>ForceExtended</literal> controls the use of RFC2428 " "<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is " @@ -4703,18 +4736,18 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:343 sources.list.5.xml:132 +#: apt.conf.5.xml:350 sources.list.5.xml:132 msgid "cdrom" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:349 +#: apt.conf.5.xml:356 #, no-wrap msgid "/cdrom/::Mount \"foo\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:344 +#: apt.conf.5.xml:351 msgid "" "CDROM URIs; the only setting for CDROM URIs is the mount point, " "<literal>cdrom::Mount</literal> which must be the mount point for the CDROM " @@ -4727,12 +4760,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:354 +#: apt.conf.5.xml:361 msgid "gpgv" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:355 +#: apt.conf.5.xml:362 msgid "" "GPGV URIs; the only option for GPGV URIs is the option to pass additional " "parameters to gpgv. <literal>gpgv::Options</literal> Additional options " @@ -4740,18 +4773,18 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:360 +#: apt.conf.5.xml:367 msgid "CompressionTypes" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:366 +#: apt.conf.5.xml:373 #, no-wrap msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:361 +#: apt.conf.5.xml:368 msgid "" "List of compression types which are understood by the acquire methods. " "Files like <filename>Packages</filename> can be available in various " @@ -4763,19 +4796,19 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:371 +#: apt.conf.5.xml:378 #, no-wrap msgid "Acquire::CompressionTypes::Order:: \"gz\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:374 +#: apt.conf.5.xml:381 #, no-wrap msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:367 +#: apt.conf.5.xml:374 msgid "" "Also the <literal>Order</literal> subgroup can be used to define in which " "order the acquire system will try to download the compressed files. The " @@ -4792,13 +4825,13 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:378 +#: apt.conf.5.xml:385 #, no-wrap msgid "Dir::Bin::bzip2 \"/bin/bzip2\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:376 +#: apt.conf.5.xml:383 msgid "" "Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</" "replaceable></literal> will be checked: If this setting exists the method " @@ -4813,7 +4846,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:383 +#: apt.conf.5.xml:390 msgid "" "While it is possible to add an empty compression type to the order list, but " "APT in its current version doesn't understand it correctly and will display " @@ -4822,6 +4855,53 @@ msgid "" "prefer uncompressed files to support the usage of local mirrors." msgstr "" +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:396 +msgid "Languages" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:397 +msgid "" +"The Languages subsection controls which <filename>Translation</filename> " +"files are downloaded and in which order APT tries to display the Description-" +"Translations. APT will try to display the first available Description for " +"the Language which is listed at first. Languages can be defined with their " +"short or long Languagecodes. Note that not all archives provide " +"<filename>Translation</filename> files for every Language - especially the " +"long Languagecodes are rare, so please inform you which ones are available " +"before you set here impossible values." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><programlisting> +#: apt.conf.5.xml:413 +#, no-wrap +msgid "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; };" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:403 +msgid "" +"The default list includes \"environment\" and \"en\". " +"\"<literal>environment</literal>\" has a special meaning here: It will be " +"replaced at runtime with the languagecodes extracted from the " +"<literal>LC_MESSAGES</literal> enviroment variable. It will also ensure " +"that these codes are not included twice in the list. If " +"<literal>LC_MESSAGES</literal> is set to \"C\" only the " +"<filename>Translation-en</filename> file (if available) will be used. To " +"force apt to use no Translation file use the setting <literal>Acquire::" +"Languages=none</literal>. \"<literal>none</literal>\" is another special " +"meaning code which will stop the search for a fitting <filename>Translation</" +"filename> file. This can be used by the system administrator to let APT " +"know that it should download also this files without actually use them if " +"not the environment specifies this languages. So the following example " +"configuration will result in the order \"en, de\" in an english and in \"de, " +"en\" in a german localization. Note that \"fr\" is downloaded, but not used " +"if APT is not used in a french localization, in such an environment the " +"order would be \"fr, de, en\". <placeholder type=\"programlisting\" id=\"0" +"\"/>" +msgstr "" + #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:217 msgid "" @@ -4830,12 +4910,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:392 +#: apt.conf.5.xml:420 msgid "Directories" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:394 +#: apt.conf.5.xml:422 msgid "" "The <literal>Dir::State</literal> section has directories that pertain to " "local state information. <literal>lists</literal> is the directory to place " @@ -4847,7 +4927,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:401 +#: apt.conf.5.xml:429 msgid "" "<literal>Dir::Cache</literal> contains locations pertaining to local cache " "information, such as the two package caches <literal>srcpkgcache</literal> " @@ -4860,7 +4940,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:410 +#: apt.conf.5.xml:438 msgid "" "<literal>Dir::Etc</literal> contains the location of configuration files, " "<literal>sourcelist</literal> gives the location of the sourcelist and " @@ -4870,7 +4950,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:416 +#: apt.conf.5.xml:444 msgid "" "The <literal>Dir::Parts</literal> setting reads in all the config fragments " "in lexical order from the directory specified. After this is done then the " @@ -4878,7 +4958,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:420 +#: apt.conf.5.xml:448 msgid "" "Binary programs are pointed to by <literal>Dir::Bin</literal>. <literal>Dir::" "Bin::Methods</literal> specifies the location of the method handlers and " @@ -4889,7 +4969,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:428 +#: apt.conf.5.xml:456 msgid "" "The configuration item <literal>RootDir</literal> has a special meaning. If " "set, all paths in <literal>Dir::</literal> will be relative to " @@ -4902,13 +4982,13 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:441 +#: apt.conf.5.xml:469 #, fuzzy msgid "APT in DSelect" msgstr "DSelect" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:443 +#: apt.conf.5.xml:471 msgid "" "When APT is used as a &dselect; method several configuration directives " "control the default behaviour. These are in the <literal>DSelect</literal> " @@ -4916,12 +4996,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:447 +#: apt.conf.5.xml:475 msgid "Clean" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:448 +#: apt.conf.5.xml:476 msgid "" "Cache Clean mode; this value may be one of always, prompt, auto, pre-auto " "and never. always and prompt will remove all packages from the cache after " @@ -4932,50 +5012,50 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:457 +#: apt.conf.5.xml:485 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the install phase." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:461 +#: apt.conf.5.xml:489 msgid "Updateoptions" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:462 +#: apt.conf.5.xml:490 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the update phase." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:466 +#: apt.conf.5.xml:494 msgid "PromptAfterUpdate" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:467 +#: apt.conf.5.xml:495 msgid "" "If true the [U]pdate operation in &dselect; will always prompt to continue. " "The default is to prompt only on error." msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:473 +#: apt.conf.5.xml:501 msgid "How APT calls dpkg" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:474 +#: apt.conf.5.xml:502 msgid "" "Several configuration directives control how APT invokes &dpkg;. These are " "in the <literal>DPkg</literal> section." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:479 +#: apt.conf.5.xml:507 msgid "" "This is a list of options to pass to dpkg. The options must be specified " "using the list notation and each list item is passed as a single argument to " @@ -4983,17 +5063,17 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:484 +#: apt.conf.5.xml:512 msgid "Pre-Invoke" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:484 +#: apt.conf.5.xml:512 msgid "Post-Invoke" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:485 +#: apt.conf.5.xml:513 msgid "" "This is a list of shell commands to run before/after invoking &dpkg;. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -5002,12 +5082,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:491 +#: apt.conf.5.xml:519 msgid "Pre-Install-Pkgs" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:492 +#: apt.conf.5.xml:520 msgid "" "This is a list of shell commands to run before invoking dpkg. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -5017,7 +5097,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:498 +#: apt.conf.5.xml:526 msgid "" "Version 2 of this protocol dumps more information, including the protocol " "version, the APT configuration space and the packages, files and versions " @@ -5027,36 +5107,36 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:505 +#: apt.conf.5.xml:533 msgid "Run-Directory" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:506 +#: apt.conf.5.xml:534 msgid "" "APT chdirs to this directory before invoking dpkg, the default is <filename>/" "</filename>." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:510 +#: apt.conf.5.xml:538 msgid "Build-options" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:511 +#: apt.conf.5.xml:539 msgid "" "These options are passed to &dpkg-buildpackage; when compiling packages, the " "default is to disable signing and produce all binaries." msgstr "" #. type: Content of: <refentry><refsect1><refsect2><title> -#: apt.conf.5.xml:516 +#: apt.conf.5.xml:544 msgid "dpkg trigger usage (and related options)" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:517 +#: apt.conf.5.xml:545 msgid "" "APT can call dpkg in a way so it can make aggressive use of triggers over " "multiply calls of dpkg. Without further options dpkg will use triggers only " @@ -5071,7 +5151,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para><literallayout> -#: apt.conf.5.xml:532 +#: apt.conf.5.xml:560 #, no-wrap msgid "" "DPkg::NoTriggers \"true\";\n" @@ -5081,7 +5161,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:526 +#: apt.conf.5.xml:554 msgid "" "Note that it is not guaranteed that APT will support these options or that " "these options will not cause (big) trouble in the future. If you have " @@ -5095,12 +5175,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:538 +#: apt.conf.5.xml:566 msgid "DPkg::NoTriggers" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:539 +#: apt.conf.5.xml:567 msgid "" "Add the no triggers flag to all dpkg calls (except the ConfigurePending " "call). See &dpkg; if you are interested in what this actually means. In " @@ -5112,12 +5192,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:546 +#: apt.conf.5.xml:574 msgid "PackageManager::Configure" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:547 +#: apt.conf.5.xml:575 msgid "" "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " "and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default " @@ -5133,12 +5213,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:557 +#: apt.conf.5.xml:585 msgid "DPkg::ConfigurePending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:558 +#: apt.conf.5.xml:586 msgid "" "If this option is set apt will call <command>dpkg --configure --pending</" "command> to let dpkg handle all required configurations and triggers. This " @@ -5149,12 +5229,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:564 +#: apt.conf.5.xml:592 msgid "DPkg::TriggersPending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:565 +#: apt.conf.5.xml:593 msgid "" "Useful for <literal>smart</literal> configuration as a package which has " "pending triggers is not considered as <literal>installed</literal> and dpkg " @@ -5164,12 +5244,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:570 +#: apt.conf.5.xml:598 msgid "PackageManager::UnpackAll" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:571 +#: apt.conf.5.xml:599 msgid "" "As the configuration can be deferred to be done at the end by dpkg it can be " "tried to order the unpack series only by critical needs, e.g. by Pre-" @@ -5181,12 +5261,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:578 +#: apt.conf.5.xml:606 msgid "OrderList::Score::Immediate" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:586 +#: apt.conf.5.xml:614 #, no-wrap msgid "" "OrderList::Score {\n" @@ -5198,7 +5278,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:579 +#: apt.conf.5.xml:607 msgid "" "Essential packages (and there dependencies) should be configured immediately " "after unpacking. It will be a good idea to do this quite early in the " @@ -5212,12 +5292,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:599 +#: apt.conf.5.xml:627 msgid "Periodic and Archives options" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:600 +#: apt.conf.5.xml:628 msgid "" "<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups " "of options configure behavior of apt periodic updates, which is done by " @@ -5226,12 +5306,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:608 +#: apt.conf.5.xml:636 msgid "Debug options" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:610 +#: apt.conf.5.xml:638 msgid "" "Enabling options in the <literal>Debug::</literal> section will cause " "debugging information to be sent to the standard error stream of the program " @@ -5242,7 +5322,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:621 +#: apt.conf.5.xml:649 msgid "" "<literal>Debug::pkgProblemResolver</literal> enables output about the " "decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</" @@ -5250,7 +5330,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:629 +#: apt.conf.5.xml:657 msgid "" "<literal>Debug::NoLocking</literal> disables all file locking. This can be " "used to run some operations (for instance, <literal>apt-get -s install</" @@ -5258,7 +5338,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:638 +#: apt.conf.5.xml:666 msgid "" "<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each " "time that <literal>apt</literal> invokes &dpkg;." @@ -5268,111 +5348,111 @@ msgstr "" #. motivating example, except I haven't a clue why you'd want #. to do this. #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:646 +#: apt.conf.5.xml:674 msgid "" "<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data " "in CDROM IDs." msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:656 +#: apt.conf.5.xml:684 msgid "A full list of debugging options to apt follows." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:661 +#: apt.conf.5.xml:689 msgid "<literal>Debug::Acquire::cdrom</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:665 +#: apt.conf.5.xml:693 msgid "" "Print information related to accessing <literal>cdrom://</literal> sources." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:672 +#: apt.conf.5.xml:700 msgid "<literal>Debug::Acquire::ftp</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:676 +#: apt.conf.5.xml:704 msgid "Print information related to downloading packages using FTP." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:683 +#: apt.conf.5.xml:711 msgid "<literal>Debug::Acquire::http</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:687 +#: apt.conf.5.xml:715 msgid "Print information related to downloading packages using HTTP." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:694 +#: apt.conf.5.xml:722 msgid "<literal>Debug::Acquire::https</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:698 +#: apt.conf.5.xml:726 msgid "Print information related to downloading packages using HTTPS." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:705 +#: apt.conf.5.xml:733 msgid "<literal>Debug::Acquire::gpgv</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:709 +#: apt.conf.5.xml:737 msgid "" "Print information related to verifying cryptographic signatures using " "<literal>gpg</literal>." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:716 +#: apt.conf.5.xml:744 msgid "<literal>Debug::aptcdrom</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:720 +#: apt.conf.5.xml:748 msgid "" "Output information about the process of accessing collections of packages " "stored on CD-ROMs." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:727 +#: apt.conf.5.xml:755 msgid "<literal>Debug::BuildDeps</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:730 +#: apt.conf.5.xml:758 msgid "Describes the process of resolving build-dependencies in &apt-get;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:737 +#: apt.conf.5.xml:765 msgid "<literal>Debug::Hashes</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:740 +#: apt.conf.5.xml:768 msgid "" "Output each cryptographic hash that is generated by the <literal>apt</" "literal> libraries." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:747 +#: apt.conf.5.xml:775 msgid "<literal>Debug::IdentCDROM</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:750 +#: apt.conf.5.xml:778 msgid "" "Do not include information from <literal>statfs</literal>, namely the number " "of used and free blocks on the CD-ROM filesystem, when generating an ID for " @@ -5380,93 +5460,93 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:758 +#: apt.conf.5.xml:786 msgid "<literal>Debug::NoLocking</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:761 +#: apt.conf.5.xml:789 msgid "" "Disable all file locking. For instance, this will allow two instances of " "<quote><literal>apt-get update</literal></quote> to run at the same time." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:769 +#: apt.conf.5.xml:797 msgid "<literal>Debug::pkgAcquire</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:773 +#: apt.conf.5.xml:801 msgid "Log when items are added to or removed from the global download queue." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:780 +#: apt.conf.5.xml:808 msgid "<literal>Debug::pkgAcquire::Auth</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:783 +#: apt.conf.5.xml:811 msgid "" "Output status messages and errors related to verifying checksums and " "cryptographic signatures of downloaded files." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:790 +#: apt.conf.5.xml:818 msgid "<literal>Debug::pkgAcquire::Diffs</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:793 +#: apt.conf.5.xml:821 msgid "" "Output information about downloading and applying package index list diffs, " "and errors relating to package index list diffs." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:801 +#: apt.conf.5.xml:829 msgid "<literal>Debug::pkgAcquire::RRed</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:805 +#: apt.conf.5.xml:833 msgid "" "Output information related to patching apt package lists when downloading " "index diffs instead of full indices." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:812 +#: apt.conf.5.xml:840 msgid "<literal>Debug::pkgAcquire::Worker</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:816 +#: apt.conf.5.xml:844 msgid "" "Log all interactions with the sub-processes that actually perform downloads." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:823 +#: apt.conf.5.xml:851 msgid "<literal>Debug::pkgAutoRemove</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:827 +#: apt.conf.5.xml:855 msgid "" "Log events related to the automatically-installed status of packages and to " "the removal of unused packages." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:834 +#: apt.conf.5.xml:862 msgid "<literal>Debug::pkgDepCache::AutoInstall</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:837 +#: apt.conf.5.xml:865 msgid "" "Generate debug messages describing which packages are being automatically " "installed to resolve dependencies. This corresponds to the initial auto-" @@ -5476,12 +5556,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:848 +#: apt.conf.5.xml:876 msgid "<literal>Debug::pkgDepCache::Marker</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:851 +#: apt.conf.5.xml:879 msgid "" "Generate debug messages describing which package is marked as keep/install/" "remove while the ProblemResolver does his work. Each addition or deletion " @@ -5498,91 +5578,91 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:870 +#: apt.conf.5.xml:898 msgid "<literal>Debug::pkgInitConfig</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:873 +#: apt.conf.5.xml:901 msgid "Dump the default configuration to standard error on startup." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:880 +#: apt.conf.5.xml:908 msgid "<literal>Debug::pkgDPkgPM</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:883 +#: apt.conf.5.xml:911 msgid "" "When invoking &dpkg;, output the precise command line with which it is being " "invoked, with arguments separated by a single space character." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:891 +#: apt.conf.5.xml:919 msgid "<literal>Debug::pkgDPkgProgressReporting</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:894 +#: apt.conf.5.xml:922 msgid "" "Output all the data received from &dpkg; on the status file descriptor and " "any errors encountered while parsing it." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:901 +#: apt.conf.5.xml:929 msgid "<literal>Debug::pkgOrderList</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:905 +#: apt.conf.5.xml:933 msgid "" "Generate a trace of the algorithm that decides the order in which " "<literal>apt</literal> should pass packages to &dpkg;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:913 +#: apt.conf.5.xml:941 msgid "<literal>Debug::pkgPackageManager</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:917 +#: apt.conf.5.xml:945 msgid "" "Output status messages tracing the steps performed when invoking &dpkg;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:924 +#: apt.conf.5.xml:952 msgid "<literal>Debug::pkgPolicy</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:928 +#: apt.conf.5.xml:956 msgid "Output the priority of each package list on startup." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:934 +#: apt.conf.5.xml:962 msgid "<literal>Debug::pkgProblemResolver</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:938 +#: apt.conf.5.xml:966 msgid "" "Trace the execution of the dependency resolver (this applies only to what " "happens when a complex dependency problem is encountered)." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:946 +#: apt.conf.5.xml:974 msgid "<literal>Debug::pkgProblemResolver::ShowScores</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:949 +#: apt.conf.5.xml:977 msgid "" "Display a list of all installed packages with their calculated score used by " "the pkgProblemResolver. The description of the package is the same as " @@ -5590,32 +5670,32 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:957 +#: apt.conf.5.xml:985 msgid "<literal>Debug::sourceList</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:961 +#: apt.conf.5.xml:989 msgid "" "Print information about the vendors read from <filename>/etc/apt/vendors." "list</filename>." msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:983 +#: apt.conf.5.xml:1012 msgid "" "&configureindex; is a configuration file showing example values for all " "possible options." msgstr "" #. type: Content of: <refentry><refsect1><variablelist> -#: apt.conf.5.xml:990 +#: apt.conf.5.xml:1019 msgid "&file-aptconf;" msgstr "" #. ? reading apt.conf #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:995 +#: apt.conf.5.xml:1024 msgid "&apt-cache;, &apt-config;, &apt-preferences;." msgstr "" diff --git a/doc/po/pl.po b/doc/po/pl.po index e3363ba7f..27b7a8a7b 100644 --- a/doc/po/pl.po +++ b/doc/po/pl.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: apt\n" -"POT-Creation-Date: 2009-10-29 14:19+0100\n" +"POT-Creation-Date: 2009-11-27 00:05+0100\n" "PO-Revision-Date: 2004-02-12 15:06+0100\n" "Last-Translator: Krzysztof Fiertek <akfedux@megapolis.pl>\n" "Language-Team: <debian-l10n-polish@lists.debian.org>\n" @@ -752,7 +752,7 @@ msgstr "" #. The last update date #. type: Content of: <refentry><refentryinfo> #: apt-cache.8.xml:13 apt-config.8.xml:13 apt-extracttemplates.1.xml:13 -#: apt-ftparchive.1.xml:13 apt-sortpkgs.1.xml:13 sources.list.5.xml:13 +#: apt-sortpkgs.1.xml:13 sources.list.5.xml:13 msgid "" "&apt-author.jgunthorpe; &apt-author.team; &apt-email; &apt-product; <date>29 " "February 2004</date>" @@ -1203,7 +1203,7 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt-cache.8.xml:281 apt-config.8.xml:93 apt-extracttemplates.1.xml:56 #: apt-ftparchive.1.xml:492 apt-get.8.xml:319 apt-mark.8.xml:89 -#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:456 apt.conf.5.xml:478 +#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:484 apt.conf.5.xml:506 #, fuzzy msgid "options" msgstr "Kolejne kroki" @@ -1398,14 +1398,14 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist> #: apt-cache.8.xml:356 apt-cdrom.8.xml:150 apt-config.8.xml:98 -#: apt-extracttemplates.1.xml:67 apt-ftparchive.1.xml:547 apt-get.8.xml:554 +#: apt-extracttemplates.1.xml:67 apt-ftparchive.1.xml:556 apt-get.8.xml:554 #: apt-sortpkgs.1.xml:64 msgid "&apt-commonoptions;" msgstr "" #. type: Content of: <refentry><refsect1><title> #: apt-cache.8.xml:361 apt-get.8.xml:559 apt-key.8.xml:138 apt-mark.8.xml:122 -#: apt.conf.5.xml:988 apt_preferences.5.xml:615 +#: apt.conf.5.xml:1017 apt_preferences.5.xml:615 msgid "Files" msgstr "" @@ -1416,9 +1416,9 @@ msgstr "" #. type: Content of: <refentry><refsect1><title> #: apt-cache.8.xml:368 apt-cdrom.8.xml:155 apt-config.8.xml:103 -#: apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:563 apt-get.8.xml:569 +#: apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:572 apt-get.8.xml:569 #: apt-key.8.xml:162 apt-mark.8.xml:133 apt-secure.8.xml:181 -#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:994 apt_preferences.5.xml:622 +#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:1023 apt_preferences.5.xml:622 #: sources.list.5.xml:233 msgid "See Also" msgstr "" @@ -1430,7 +1430,7 @@ msgstr "" #. type: Content of: <refentry><refsect1><title> #: apt-cache.8.xml:373 apt-cdrom.8.xml:160 apt-config.8.xml:108 -#: apt-extracttemplates.1.xml:78 apt-ftparchive.1.xml:567 apt-get.8.xml:575 +#: apt-extracttemplates.1.xml:78 apt-ftparchive.1.xml:576 apt-get.8.xml:575 #: apt-mark.8.xml:137 apt-sortpkgs.1.xml:73 msgid "Diagnostics" msgstr "" @@ -1732,7 +1732,7 @@ msgid "Just show the contents of the configuration space." msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt-config.8.xml:104 apt-extracttemplates.1.xml:75 apt-ftparchive.1.xml:564 +#: apt-config.8.xml:104 apt-extracttemplates.1.xml:75 apt-ftparchive.1.xml:573 #: apt-sortpkgs.1.xml:70 msgid "&apt-conf;" msgstr "" @@ -1817,6 +1817,14 @@ msgid "" "decimal 100 on error." msgstr "" +#. The last update date +#. type: Content of: <refentry><refentryinfo> +#: apt-ftparchive.1.xml:13 +msgid "" +"&apt-author.jgunthorpe; &apt-author.team; &apt-email; &apt-product; <date>17 " +"August 2009</date>" +msgstr "" + #. type: Content of: <refentry><refnamediv><refname> #: apt-ftparchive.1.xml:22 apt-ftparchive.1.xml:29 msgid "apt-ftparchive" @@ -2678,27 +2686,42 @@ msgid "" "FTPArchive::ReadOnlyDB</literal>." msgstr "" +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:547 +msgid "<option>APT::FTPArchive::LongDescription</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:549 +msgid "" +"This configuration option defaults to \"<literal>true</literal>\" and should " +"only be set to <literal>\"false\"</literal> if the Archive generated with " +"&apt-ftparchive; also provides <filename>Translation</filename> files. Note " +"that it is currently not possible to create these files with <command>apt-" +"ftparchive</command>." +msgstr "" + #. type: Content of: <refentry><refsect1><title> -#: apt-ftparchive.1.xml:552 apt.conf.5.xml:982 apt_preferences.5.xml:462 +#: apt-ftparchive.1.xml:561 apt.conf.5.xml:1011 apt_preferences.5.xml:462 #: sources.list.5.xml:193 msgid "Examples" msgstr "" #. type: Content of: <refentry><refsect1><para><programlisting> -#: apt-ftparchive.1.xml:558 +#: apt-ftparchive.1.xml:567 #, no-wrap msgid "<command>apt-ftparchive</command> packages <replaceable>directory</replaceable> | <command>gzip</command> > <filename>Packages.gz</filename>\n" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt-ftparchive.1.xml:554 +#: apt-ftparchive.1.xml:563 msgid "" "To create a compressed Packages file for a directory containing binary " "packages (.deb): <placeholder type=\"programlisting\" id=\"0\"/>" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt-ftparchive.1.xml:568 +#: apt-ftparchive.1.xml:577 msgid "" "<command>apt-ftparchive</command> returns zero on normal operation, decimal " "100 on error." @@ -4588,7 +4611,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:264 apt.conf.5.xml:321 +#: apt.conf.5.xml:264 apt.conf.5.xml:328 msgid "" "The option <literal>timeout</literal> sets the timeout timer used by the " "method, this applies to all things including connection timeout and data " @@ -4617,21 +4640,31 @@ msgid "" "multiple servers at the same time.)" msgstr "" +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:280 +msgid "" +"<literal>Acquire::http::User-Agent</literal> can be used to set a different " +"User-Agent for the http download method as some proxies allow access for " +"clients only if the client uses a known identifier." +msgstr "" + #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:281 +#: apt.conf.5.xml:286 msgid "https" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:282 +#: apt.conf.5.xml:287 msgid "" -"HTTPS URIs. Cache-control and proxy options are the same as for " -"<literal>http</literal> method. <literal>Pipeline-Depth</literal> option is " +"HTTPS URIs. Cache-control, Timeout, AllowRedirect, Dl-Limit and proxy " +"options are the same as for <literal>http</literal> method and will also " +"default to the options from the <literal>http</literal> method if they are " +"not explicitly set for https. <literal>Pipeline-Depth</literal> option is " "not supported yet." msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:286 +#: apt.conf.5.xml:293 msgid "" "<literal>CaInfo</literal> suboption specifies place of file that holds info " "about trusted certificates. <literal><host>::CaInfo</literal> is " @@ -4652,12 +4685,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:304 sources.list.5.xml:150 +#: apt.conf.5.xml:311 sources.list.5.xml:150 msgid "ftp" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:305 +#: apt.conf.5.xml:312 msgid "" "FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the standard " "form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. Per host " @@ -4676,7 +4709,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:324 +#: apt.conf.5.xml:331 msgid "" "Several settings are provided to control passive mode. Generally it is safe " "to leave passive mode on, it works in nearly every environment. However " @@ -4686,7 +4719,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:331 +#: apt.conf.5.xml:338 msgid "" "It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</" "envar> environment variable to a http url - see the discussion of the http " @@ -4695,7 +4728,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:336 +#: apt.conf.5.xml:343 msgid "" "The setting <literal>ForceExtended</literal> controls the use of RFC2428 " "<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is " @@ -4705,18 +4738,18 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:343 sources.list.5.xml:132 +#: apt.conf.5.xml:350 sources.list.5.xml:132 msgid "cdrom" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:349 +#: apt.conf.5.xml:356 #, no-wrap msgid "/cdrom/::Mount \"foo\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:344 +#: apt.conf.5.xml:351 msgid "" "CDROM URIs; the only setting for CDROM URIs is the mount point, " "<literal>cdrom::Mount</literal> which must be the mount point for the CDROM " @@ -4729,12 +4762,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:354 +#: apt.conf.5.xml:361 msgid "gpgv" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:355 +#: apt.conf.5.xml:362 msgid "" "GPGV URIs; the only option for GPGV URIs is the option to pass additional " "parameters to gpgv. <literal>gpgv::Options</literal> Additional options " @@ -4742,18 +4775,18 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:360 +#: apt.conf.5.xml:367 msgid "CompressionTypes" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:366 +#: apt.conf.5.xml:373 #, no-wrap msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:361 +#: apt.conf.5.xml:368 msgid "" "List of compression types which are understood by the acquire methods. " "Files like <filename>Packages</filename> can be available in various " @@ -4765,19 +4798,19 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:371 +#: apt.conf.5.xml:378 #, no-wrap msgid "Acquire::CompressionTypes::Order:: \"gz\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:374 +#: apt.conf.5.xml:381 #, no-wrap msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:367 +#: apt.conf.5.xml:374 msgid "" "Also the <literal>Order</literal> subgroup can be used to define in which " "order the acquire system will try to download the compressed files. The " @@ -4794,13 +4827,13 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:378 +#: apt.conf.5.xml:385 #, no-wrap msgid "Dir::Bin::bzip2 \"/bin/bzip2\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:376 +#: apt.conf.5.xml:383 msgid "" "Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</" "replaceable></literal> will be checked: If this setting exists the method " @@ -4815,7 +4848,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:383 +#: apt.conf.5.xml:390 msgid "" "While it is possible to add an empty compression type to the order list, but " "APT in its current version doesn't understand it correctly and will display " @@ -4824,6 +4857,53 @@ msgid "" "prefer uncompressed files to support the usage of local mirrors." msgstr "" +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:396 +msgid "Languages" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:397 +msgid "" +"The Languages subsection controls which <filename>Translation</filename> " +"files are downloaded and in which order APT tries to display the Description-" +"Translations. APT will try to display the first available Description for " +"the Language which is listed at first. Languages can be defined with their " +"short or long Languagecodes. Note that not all archives provide " +"<filename>Translation</filename> files for every Language - especially the " +"long Languagecodes are rare, so please inform you which ones are available " +"before you set here impossible values." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><programlisting> +#: apt.conf.5.xml:413 +#, no-wrap +msgid "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; };" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:403 +msgid "" +"The default list includes \"environment\" and \"en\". " +"\"<literal>environment</literal>\" has a special meaning here: It will be " +"replaced at runtime with the languagecodes extracted from the " +"<literal>LC_MESSAGES</literal> enviroment variable. It will also ensure " +"that these codes are not included twice in the list. If " +"<literal>LC_MESSAGES</literal> is set to \"C\" only the " +"<filename>Translation-en</filename> file (if available) will be used. To " +"force apt to use no Translation file use the setting <literal>Acquire::" +"Languages=none</literal>. \"<literal>none</literal>\" is another special " +"meaning code which will stop the search for a fitting <filename>Translation</" +"filename> file. This can be used by the system administrator to let APT " +"know that it should download also this files without actually use them if " +"not the environment specifies this languages. So the following example " +"configuration will result in the order \"en, de\" in an english and in \"de, " +"en\" in a german localization. Note that \"fr\" is downloaded, but not used " +"if APT is not used in a french localization, in such an environment the " +"order would be \"fr, de, en\". <placeholder type=\"programlisting\" id=\"0" +"\"/>" +msgstr "" + #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:217 msgid "" @@ -4832,12 +4912,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:392 +#: apt.conf.5.xml:420 msgid "Directories" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:394 +#: apt.conf.5.xml:422 msgid "" "The <literal>Dir::State</literal> section has directories that pertain to " "local state information. <literal>lists</literal> is the directory to place " @@ -4849,7 +4929,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:401 +#: apt.conf.5.xml:429 msgid "" "<literal>Dir::Cache</literal> contains locations pertaining to local cache " "information, such as the two package caches <literal>srcpkgcache</literal> " @@ -4862,7 +4942,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:410 +#: apt.conf.5.xml:438 msgid "" "<literal>Dir::Etc</literal> contains the location of configuration files, " "<literal>sourcelist</literal> gives the location of the sourcelist and " @@ -4872,7 +4952,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:416 +#: apt.conf.5.xml:444 msgid "" "The <literal>Dir::Parts</literal> setting reads in all the config fragments " "in lexical order from the directory specified. After this is done then the " @@ -4880,7 +4960,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:420 +#: apt.conf.5.xml:448 msgid "" "Binary programs are pointed to by <literal>Dir::Bin</literal>. <literal>Dir::" "Bin::Methods</literal> specifies the location of the method handlers and " @@ -4891,7 +4971,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:428 +#: apt.conf.5.xml:456 msgid "" "The configuration item <literal>RootDir</literal> has a special meaning. If " "set, all paths in <literal>Dir::</literal> will be relative to " @@ -4904,12 +4984,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:441 +#: apt.conf.5.xml:469 msgid "APT in DSelect" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:443 +#: apt.conf.5.xml:471 msgid "" "When APT is used as a &dselect; method several configuration directives " "control the default behaviour. These are in the <literal>DSelect</literal> " @@ -4917,12 +4997,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:447 +#: apt.conf.5.xml:475 msgid "Clean" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:448 +#: apt.conf.5.xml:476 msgid "" "Cache Clean mode; this value may be one of always, prompt, auto, pre-auto " "and never. always and prompt will remove all packages from the cache after " @@ -4933,50 +5013,50 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:457 +#: apt.conf.5.xml:485 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the install phase." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:461 +#: apt.conf.5.xml:489 msgid "Updateoptions" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:462 +#: apt.conf.5.xml:490 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the update phase." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:466 +#: apt.conf.5.xml:494 msgid "PromptAfterUpdate" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:467 +#: apt.conf.5.xml:495 msgid "" "If true the [U]pdate operation in &dselect; will always prompt to continue. " "The default is to prompt only on error." msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:473 +#: apt.conf.5.xml:501 msgid "How APT calls dpkg" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:474 +#: apt.conf.5.xml:502 msgid "" "Several configuration directives control how APT invokes &dpkg;. These are " "in the <literal>DPkg</literal> section." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:479 +#: apt.conf.5.xml:507 msgid "" "This is a list of options to pass to dpkg. The options must be specified " "using the list notation and each list item is passed as a single argument to " @@ -4984,17 +5064,17 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:484 +#: apt.conf.5.xml:512 msgid "Pre-Invoke" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:484 +#: apt.conf.5.xml:512 msgid "Post-Invoke" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:485 +#: apt.conf.5.xml:513 msgid "" "This is a list of shell commands to run before/after invoking &dpkg;. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -5003,12 +5083,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:491 +#: apt.conf.5.xml:519 msgid "Pre-Install-Pkgs" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:492 +#: apt.conf.5.xml:520 msgid "" "This is a list of shell commands to run before invoking dpkg. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -5018,7 +5098,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:498 +#: apt.conf.5.xml:526 msgid "" "Version 2 of this protocol dumps more information, including the protocol " "version, the APT configuration space and the packages, files and versions " @@ -5028,36 +5108,36 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:505 +#: apt.conf.5.xml:533 msgid "Run-Directory" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:506 +#: apt.conf.5.xml:534 msgid "" "APT chdirs to this directory before invoking dpkg, the default is <filename>/" "</filename>." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:510 +#: apt.conf.5.xml:538 msgid "Build-options" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:511 +#: apt.conf.5.xml:539 msgid "" "These options are passed to &dpkg-buildpackage; when compiling packages, the " "default is to disable signing and produce all binaries." msgstr "" #. type: Content of: <refentry><refsect1><refsect2><title> -#: apt.conf.5.xml:516 +#: apt.conf.5.xml:544 msgid "dpkg trigger usage (and related options)" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:517 +#: apt.conf.5.xml:545 msgid "" "APT can call dpkg in a way so it can make aggressive use of triggers over " "multiply calls of dpkg. Without further options dpkg will use triggers only " @@ -5072,7 +5152,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para><literallayout> -#: apt.conf.5.xml:532 +#: apt.conf.5.xml:560 #, no-wrap msgid "" "DPkg::NoTriggers \"true\";\n" @@ -5082,7 +5162,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:526 +#: apt.conf.5.xml:554 msgid "" "Note that it is not guaranteed that APT will support these options or that " "these options will not cause (big) trouble in the future. If you have " @@ -5096,12 +5176,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:538 +#: apt.conf.5.xml:566 msgid "DPkg::NoTriggers" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:539 +#: apt.conf.5.xml:567 msgid "" "Add the no triggers flag to all dpkg calls (except the ConfigurePending " "call). See &dpkg; if you are interested in what this actually means. In " @@ -5113,12 +5193,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:546 +#: apt.conf.5.xml:574 msgid "PackageManager::Configure" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:547 +#: apt.conf.5.xml:575 msgid "" "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " "and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default " @@ -5134,12 +5214,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:557 +#: apt.conf.5.xml:585 msgid "DPkg::ConfigurePending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:558 +#: apt.conf.5.xml:586 msgid "" "If this option is set apt will call <command>dpkg --configure --pending</" "command> to let dpkg handle all required configurations and triggers. This " @@ -5150,12 +5230,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:564 +#: apt.conf.5.xml:592 msgid "DPkg::TriggersPending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:565 +#: apt.conf.5.xml:593 msgid "" "Useful for <literal>smart</literal> configuration as a package which has " "pending triggers is not considered as <literal>installed</literal> and dpkg " @@ -5165,12 +5245,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:570 +#: apt.conf.5.xml:598 msgid "PackageManager::UnpackAll" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:571 +#: apt.conf.5.xml:599 msgid "" "As the configuration can be deferred to be done at the end by dpkg it can be " "tried to order the unpack series only by critical needs, e.g. by Pre-" @@ -5182,12 +5262,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:578 +#: apt.conf.5.xml:606 msgid "OrderList::Score::Immediate" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:586 +#: apt.conf.5.xml:614 #, no-wrap msgid "" "OrderList::Score {\n" @@ -5199,7 +5279,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:579 +#: apt.conf.5.xml:607 msgid "" "Essential packages (and there dependencies) should be configured immediately " "after unpacking. It will be a good idea to do this quite early in the " @@ -5213,12 +5293,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:599 +#: apt.conf.5.xml:627 msgid "Periodic and Archives options" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:600 +#: apt.conf.5.xml:628 msgid "" "<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups " "of options configure behavior of apt periodic updates, which is done by " @@ -5227,12 +5307,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:608 +#: apt.conf.5.xml:636 msgid "Debug options" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:610 +#: apt.conf.5.xml:638 msgid "" "Enabling options in the <literal>Debug::</literal> section will cause " "debugging information to be sent to the standard error stream of the program " @@ -5243,7 +5323,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:621 +#: apt.conf.5.xml:649 msgid "" "<literal>Debug::pkgProblemResolver</literal> enables output about the " "decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</" @@ -5251,7 +5331,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:629 +#: apt.conf.5.xml:657 msgid "" "<literal>Debug::NoLocking</literal> disables all file locking. This can be " "used to run some operations (for instance, <literal>apt-get -s install</" @@ -5259,7 +5339,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:638 +#: apt.conf.5.xml:666 msgid "" "<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each " "time that <literal>apt</literal> invokes &dpkg;." @@ -5269,111 +5349,111 @@ msgstr "" #. motivating example, except I haven't a clue why you'd want #. to do this. #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:646 +#: apt.conf.5.xml:674 msgid "" "<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data " "in CDROM IDs." msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:656 +#: apt.conf.5.xml:684 msgid "A full list of debugging options to apt follows." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:661 +#: apt.conf.5.xml:689 msgid "<literal>Debug::Acquire::cdrom</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:665 +#: apt.conf.5.xml:693 msgid "" "Print information related to accessing <literal>cdrom://</literal> sources." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:672 +#: apt.conf.5.xml:700 msgid "<literal>Debug::Acquire::ftp</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:676 +#: apt.conf.5.xml:704 msgid "Print information related to downloading packages using FTP." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:683 +#: apt.conf.5.xml:711 msgid "<literal>Debug::Acquire::http</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:687 +#: apt.conf.5.xml:715 msgid "Print information related to downloading packages using HTTP." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:694 +#: apt.conf.5.xml:722 msgid "<literal>Debug::Acquire::https</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:698 +#: apt.conf.5.xml:726 msgid "Print information related to downloading packages using HTTPS." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:705 +#: apt.conf.5.xml:733 msgid "<literal>Debug::Acquire::gpgv</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:709 +#: apt.conf.5.xml:737 msgid "" "Print information related to verifying cryptographic signatures using " "<literal>gpg</literal>." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:716 +#: apt.conf.5.xml:744 msgid "<literal>Debug::aptcdrom</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:720 +#: apt.conf.5.xml:748 msgid "" "Output information about the process of accessing collections of packages " "stored on CD-ROMs." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:727 +#: apt.conf.5.xml:755 msgid "<literal>Debug::BuildDeps</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:730 +#: apt.conf.5.xml:758 msgid "Describes the process of resolving build-dependencies in &apt-get;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:737 +#: apt.conf.5.xml:765 msgid "<literal>Debug::Hashes</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:740 +#: apt.conf.5.xml:768 msgid "" "Output each cryptographic hash that is generated by the <literal>apt</" "literal> libraries." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:747 +#: apt.conf.5.xml:775 msgid "<literal>Debug::IdentCDROM</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:750 +#: apt.conf.5.xml:778 msgid "" "Do not include information from <literal>statfs</literal>, namely the number " "of used and free blocks on the CD-ROM filesystem, when generating an ID for " @@ -5381,93 +5461,93 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:758 +#: apt.conf.5.xml:786 msgid "<literal>Debug::NoLocking</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:761 +#: apt.conf.5.xml:789 msgid "" "Disable all file locking. For instance, this will allow two instances of " "<quote><literal>apt-get update</literal></quote> to run at the same time." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:769 +#: apt.conf.5.xml:797 msgid "<literal>Debug::pkgAcquire</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:773 +#: apt.conf.5.xml:801 msgid "Log when items are added to or removed from the global download queue." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:780 +#: apt.conf.5.xml:808 msgid "<literal>Debug::pkgAcquire::Auth</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:783 +#: apt.conf.5.xml:811 msgid "" "Output status messages and errors related to verifying checksums and " "cryptographic signatures of downloaded files." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:790 +#: apt.conf.5.xml:818 msgid "<literal>Debug::pkgAcquire::Diffs</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:793 +#: apt.conf.5.xml:821 msgid "" "Output information about downloading and applying package index list diffs, " "and errors relating to package index list diffs." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:801 +#: apt.conf.5.xml:829 msgid "<literal>Debug::pkgAcquire::RRed</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:805 +#: apt.conf.5.xml:833 msgid "" "Output information related to patching apt package lists when downloading " "index diffs instead of full indices." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:812 +#: apt.conf.5.xml:840 msgid "<literal>Debug::pkgAcquire::Worker</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:816 +#: apt.conf.5.xml:844 msgid "" "Log all interactions with the sub-processes that actually perform downloads." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:823 +#: apt.conf.5.xml:851 msgid "<literal>Debug::pkgAutoRemove</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:827 +#: apt.conf.5.xml:855 msgid "" "Log events related to the automatically-installed status of packages and to " "the removal of unused packages." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:834 +#: apt.conf.5.xml:862 msgid "<literal>Debug::pkgDepCache::AutoInstall</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:837 +#: apt.conf.5.xml:865 msgid "" "Generate debug messages describing which packages are being automatically " "installed to resolve dependencies. This corresponds to the initial auto-" @@ -5477,12 +5557,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:848 +#: apt.conf.5.xml:876 msgid "<literal>Debug::pkgDepCache::Marker</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:851 +#: apt.conf.5.xml:879 msgid "" "Generate debug messages describing which package is marked as keep/install/" "remove while the ProblemResolver does his work. Each addition or deletion " @@ -5499,91 +5579,91 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:870 +#: apt.conf.5.xml:898 msgid "<literal>Debug::pkgInitConfig</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:873 +#: apt.conf.5.xml:901 msgid "Dump the default configuration to standard error on startup." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:880 +#: apt.conf.5.xml:908 msgid "<literal>Debug::pkgDPkgPM</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:883 +#: apt.conf.5.xml:911 msgid "" "When invoking &dpkg;, output the precise command line with which it is being " "invoked, with arguments separated by a single space character." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:891 +#: apt.conf.5.xml:919 msgid "<literal>Debug::pkgDPkgProgressReporting</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:894 +#: apt.conf.5.xml:922 msgid "" "Output all the data received from &dpkg; on the status file descriptor and " "any errors encountered while parsing it." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:901 +#: apt.conf.5.xml:929 msgid "<literal>Debug::pkgOrderList</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:905 +#: apt.conf.5.xml:933 msgid "" "Generate a trace of the algorithm that decides the order in which " "<literal>apt</literal> should pass packages to &dpkg;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:913 +#: apt.conf.5.xml:941 msgid "<literal>Debug::pkgPackageManager</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:917 +#: apt.conf.5.xml:945 msgid "" "Output status messages tracing the steps performed when invoking &dpkg;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:924 +#: apt.conf.5.xml:952 msgid "<literal>Debug::pkgPolicy</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:928 +#: apt.conf.5.xml:956 msgid "Output the priority of each package list on startup." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:934 +#: apt.conf.5.xml:962 msgid "<literal>Debug::pkgProblemResolver</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:938 +#: apt.conf.5.xml:966 msgid "" "Trace the execution of the dependency resolver (this applies only to what " "happens when a complex dependency problem is encountered)." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:946 +#: apt.conf.5.xml:974 msgid "<literal>Debug::pkgProblemResolver::ShowScores</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:949 +#: apt.conf.5.xml:977 msgid "" "Display a list of all installed packages with their calculated score used by " "the pkgProblemResolver. The description of the package is the same as " @@ -5591,32 +5671,32 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:957 +#: apt.conf.5.xml:985 msgid "<literal>Debug::sourceList</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:961 +#: apt.conf.5.xml:989 msgid "" "Print information about the vendors read from <filename>/etc/apt/vendors." "list</filename>." msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:983 +#: apt.conf.5.xml:1012 msgid "" "&configureindex; is a configuration file showing example values for all " "possible options." msgstr "" #. type: Content of: <refentry><refsect1><variablelist> -#: apt.conf.5.xml:990 +#: apt.conf.5.xml:1019 msgid "&file-aptconf;" msgstr "" #. ? reading apt.conf #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:995 +#: apt.conf.5.xml:1024 msgid "&apt-cache;, &apt-config;, &apt-preferences;." msgstr "" diff --git a/doc/po/pt_BR.po b/doc/po/pt_BR.po index e6de8f139..ea410fc4d 100644 --- a/doc/po/pt_BR.po +++ b/doc/po/pt_BR.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: apt\n" -"POT-Creation-Date: 2009-10-29 14:19+0100\n" +"POT-Creation-Date: 2009-11-27 00:05+0100\n" "PO-Revision-Date: 2004-09-20 17:02+0000\n" "Last-Translator: André Luís Lopes <andrelop@debian.org>\n" "Language-Team: <debian-l10n-portuguese@lists.debian.org>\n" @@ -795,7 +795,7 @@ msgstr "" #. The last update date #. type: Content of: <refentry><refentryinfo> #: apt-cache.8.xml:13 apt-config.8.xml:13 apt-extracttemplates.1.xml:13 -#: apt-ftparchive.1.xml:13 apt-sortpkgs.1.xml:13 sources.list.5.xml:13 +#: apt-sortpkgs.1.xml:13 sources.list.5.xml:13 msgid "" "&apt-author.jgunthorpe; &apt-author.team; &apt-email; &apt-product; <date>29 " "February 2004</date>" @@ -1249,7 +1249,7 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> #: apt-cache.8.xml:281 apt-config.8.xml:93 apt-extracttemplates.1.xml:56 #: apt-ftparchive.1.xml:492 apt-get.8.xml:319 apt-mark.8.xml:89 -#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:456 apt.conf.5.xml:478 +#: apt-sortpkgs.1.xml:54 apt.conf.5.xml:484 apt.conf.5.xml:506 msgid "options" msgstr "" @@ -1443,14 +1443,14 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist> #: apt-cache.8.xml:356 apt-cdrom.8.xml:150 apt-config.8.xml:98 -#: apt-extracttemplates.1.xml:67 apt-ftparchive.1.xml:547 apt-get.8.xml:554 +#: apt-extracttemplates.1.xml:67 apt-ftparchive.1.xml:556 apt-get.8.xml:554 #: apt-sortpkgs.1.xml:64 msgid "&apt-commonoptions;" msgstr "" #. type: Content of: <refentry><refsect1><title> #: apt-cache.8.xml:361 apt-get.8.xml:559 apt-key.8.xml:138 apt-mark.8.xml:122 -#: apt.conf.5.xml:988 apt_preferences.5.xml:615 +#: apt.conf.5.xml:1017 apt_preferences.5.xml:615 msgid "Files" msgstr "" @@ -1461,9 +1461,9 @@ msgstr "" #. type: Content of: <refentry><refsect1><title> #: apt-cache.8.xml:368 apt-cdrom.8.xml:155 apt-config.8.xml:103 -#: apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:563 apt-get.8.xml:569 +#: apt-extracttemplates.1.xml:74 apt-ftparchive.1.xml:572 apt-get.8.xml:569 #: apt-key.8.xml:162 apt-mark.8.xml:133 apt-secure.8.xml:181 -#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:994 apt_preferences.5.xml:622 +#: apt-sortpkgs.1.xml:69 apt.conf.5.xml:1023 apt_preferences.5.xml:622 #: sources.list.5.xml:233 #, fuzzy msgid "See Also" @@ -1476,7 +1476,7 @@ msgstr "" #. type: Content of: <refentry><refsect1><title> #: apt-cache.8.xml:373 apt-cdrom.8.xml:160 apt-config.8.xml:108 -#: apt-extracttemplates.1.xml:78 apt-ftparchive.1.xml:567 apt-get.8.xml:575 +#: apt-extracttemplates.1.xml:78 apt-ftparchive.1.xml:576 apt-get.8.xml:575 #: apt-mark.8.xml:137 apt-sortpkgs.1.xml:73 msgid "Diagnostics" msgstr "" @@ -1777,7 +1777,7 @@ msgid "Just show the contents of the configuration space." msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt-config.8.xml:104 apt-extracttemplates.1.xml:75 apt-ftparchive.1.xml:564 +#: apt-config.8.xml:104 apt-extracttemplates.1.xml:75 apt-ftparchive.1.xml:573 #: apt-sortpkgs.1.xml:70 #, fuzzy msgid "&apt-conf;" @@ -1866,6 +1866,14 @@ msgid "" "decimal 100 on error." msgstr "" +#. The last update date +#. type: Content of: <refentry><refentryinfo> +#: apt-ftparchive.1.xml:13 +msgid "" +"&apt-author.jgunthorpe; &apt-author.team; &apt-email; &apt-product; <date>17 " +"August 2009</date>" +msgstr "" + #. type: Content of: <refentry><refnamediv><refname> #: apt-ftparchive.1.xml:22 apt-ftparchive.1.xml:29 msgid "apt-ftparchive" @@ -2725,28 +2733,43 @@ msgid "" "FTPArchive::ReadOnlyDB</literal>." msgstr "" +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-ftparchive.1.xml:547 +msgid "<option>APT::FTPArchive::LongDescription</option>" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-ftparchive.1.xml:549 +msgid "" +"This configuration option defaults to \"<literal>true</literal>\" and should " +"only be set to <literal>\"false\"</literal> if the Archive generated with " +"&apt-ftparchive; also provides <filename>Translation</filename> files. Note " +"that it is currently not possible to create these files with <command>apt-" +"ftparchive</command>." +msgstr "" + #. type: Content of: <refentry><refsect1><title> -#: apt-ftparchive.1.xml:552 apt.conf.5.xml:982 apt_preferences.5.xml:462 +#: apt-ftparchive.1.xml:561 apt.conf.5.xml:1011 apt_preferences.5.xml:462 #: sources.list.5.xml:193 #, fuzzy msgid "Examples" msgstr "Exemplos" #. type: Content of: <refentry><refsect1><para><programlisting> -#: apt-ftparchive.1.xml:558 +#: apt-ftparchive.1.xml:567 #, no-wrap msgid "<command>apt-ftparchive</command> packages <replaceable>directory</replaceable> | <command>gzip</command> > <filename>Packages.gz</filename>\n" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt-ftparchive.1.xml:554 +#: apt-ftparchive.1.xml:563 msgid "" "To create a compressed Packages file for a directory containing binary " "packages (.deb): <placeholder type=\"programlisting\" id=\"0\"/>" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt-ftparchive.1.xml:568 +#: apt-ftparchive.1.xml:577 msgid "" "<command>apt-ftparchive</command> returns zero on normal operation, decimal " "100 on error." @@ -4637,7 +4660,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:264 apt.conf.5.xml:321 +#: apt.conf.5.xml:264 apt.conf.5.xml:328 msgid "" "The option <literal>timeout</literal> sets the timeout timer used by the " "method, this applies to all things including connection timeout and data " @@ -4666,21 +4689,31 @@ msgid "" "multiple servers at the same time.)" msgstr "" +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:280 +msgid "" +"<literal>Acquire::http::User-Agent</literal> can be used to set a different " +"User-Agent for the http download method as some proxies allow access for " +"clients only if the client uses a known identifier." +msgstr "" + #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:281 +#: apt.conf.5.xml:286 msgid "https" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:282 +#: apt.conf.5.xml:287 msgid "" -"HTTPS URIs. Cache-control and proxy options are the same as for " -"<literal>http</literal> method. <literal>Pipeline-Depth</literal> option is " +"HTTPS URIs. Cache-control, Timeout, AllowRedirect, Dl-Limit and proxy " +"options are the same as for <literal>http</literal> method and will also " +"default to the options from the <literal>http</literal> method if they are " +"not explicitly set for https. <literal>Pipeline-Depth</literal> option is " "not supported yet." msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:286 +#: apt.conf.5.xml:293 msgid "" "<literal>CaInfo</literal> suboption specifies place of file that holds info " "about trusted certificates. <literal><host>::CaInfo</literal> is " @@ -4701,12 +4734,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:304 sources.list.5.xml:150 +#: apt.conf.5.xml:311 sources.list.5.xml:150 msgid "ftp" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:305 +#: apt.conf.5.xml:312 msgid "" "FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the standard " "form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. Per host " @@ -4725,7 +4758,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:324 +#: apt.conf.5.xml:331 msgid "" "Several settings are provided to control passive mode. Generally it is safe " "to leave passive mode on, it works in nearly every environment. However " @@ -4735,7 +4768,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:331 +#: apt.conf.5.xml:338 msgid "" "It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</" "envar> environment variable to a http url - see the discussion of the http " @@ -4744,7 +4777,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:336 +#: apt.conf.5.xml:343 msgid "" "The setting <literal>ForceExtended</literal> controls the use of RFC2428 " "<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is " @@ -4754,18 +4787,18 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:343 sources.list.5.xml:132 +#: apt.conf.5.xml:350 sources.list.5.xml:132 msgid "cdrom" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:349 +#: apt.conf.5.xml:356 #, no-wrap msgid "/cdrom/::Mount \"foo\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:344 +#: apt.conf.5.xml:351 msgid "" "CDROM URIs; the only setting for CDROM URIs is the mount point, " "<literal>cdrom::Mount</literal> which must be the mount point for the CDROM " @@ -4778,12 +4811,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:354 +#: apt.conf.5.xml:361 msgid "gpgv" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:355 +#: apt.conf.5.xml:362 msgid "" "GPGV URIs; the only option for GPGV URIs is the option to pass additional " "parameters to gpgv. <literal>gpgv::Options</literal> Additional options " @@ -4791,18 +4824,18 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> -#: apt.conf.5.xml:360 +#: apt.conf.5.xml:367 msgid "CompressionTypes" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:366 +#: apt.conf.5.xml:373 #, no-wrap msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:361 +#: apt.conf.5.xml:368 msgid "" "List of compression types which are understood by the acquire methods. " "Files like <filename>Packages</filename> can be available in various " @@ -4814,19 +4847,19 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:371 +#: apt.conf.5.xml:378 #, no-wrap msgid "Acquire::CompressionTypes::Order:: \"gz\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:374 +#: apt.conf.5.xml:381 #, no-wrap msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:367 +#: apt.conf.5.xml:374 msgid "" "Also the <literal>Order</literal> subgroup can be used to define in which " "order the acquire system will try to download the compressed files. The " @@ -4843,13 +4876,13 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:378 +#: apt.conf.5.xml:385 #, no-wrap msgid "Dir::Bin::bzip2 \"/bin/bzip2\";" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:376 +#: apt.conf.5.xml:383 msgid "" "Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</" "replaceable></literal> will be checked: If this setting exists the method " @@ -4864,7 +4897,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:383 +#: apt.conf.5.xml:390 msgid "" "While it is possible to add an empty compression type to the order list, but " "APT in its current version doesn't understand it correctly and will display " @@ -4873,6 +4906,53 @@ msgid "" "prefer uncompressed files to support the usage of local mirrors." msgstr "" +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> +#: apt.conf.5.xml:396 +msgid "Languages" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:397 +msgid "" +"The Languages subsection controls which <filename>Translation</filename> " +"files are downloaded and in which order APT tries to display the Description-" +"Translations. APT will try to display the first available Description for " +"the Language which is listed at first. Languages can be defined with their " +"short or long Languagecodes. Note that not all archives provide " +"<filename>Translation</filename> files for every Language - especially the " +"long Languagecodes are rare, so please inform you which ones are available " +"before you set here impossible values." +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><programlisting> +#: apt.conf.5.xml:413 +#, no-wrap +msgid "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; };" +msgstr "" + +#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:403 +msgid "" +"The default list includes \"environment\" and \"en\". " +"\"<literal>environment</literal>\" has a special meaning here: It will be " +"replaced at runtime with the languagecodes extracted from the " +"<literal>LC_MESSAGES</literal> enviroment variable. It will also ensure " +"that these codes are not included twice in the list. If " +"<literal>LC_MESSAGES</literal> is set to \"C\" only the " +"<filename>Translation-en</filename> file (if available) will be used. To " +"force apt to use no Translation file use the setting <literal>Acquire::" +"Languages=none</literal>. \"<literal>none</literal>\" is another special " +"meaning code which will stop the search for a fitting <filename>Translation</" +"filename> file. This can be used by the system administrator to let APT " +"know that it should download also this files without actually use them if " +"not the environment specifies this languages. So the following example " +"configuration will result in the order \"en, de\" in an english and in \"de, " +"en\" in a german localization. Note that \"fr\" is downloaded, but not used " +"if APT is not used in a french localization, in such an environment the " +"order would be \"fr, de, en\". <placeholder type=\"programlisting\" id=\"0" +"\"/>" +msgstr "" + #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:217 msgid "" @@ -4881,12 +4961,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:392 +#: apt.conf.5.xml:420 msgid "Directories" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:394 +#: apt.conf.5.xml:422 msgid "" "The <literal>Dir::State</literal> section has directories that pertain to " "local state information. <literal>lists</literal> is the directory to place " @@ -4898,7 +4978,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:401 +#: apt.conf.5.xml:429 msgid "" "<literal>Dir::Cache</literal> contains locations pertaining to local cache " "information, such as the two package caches <literal>srcpkgcache</literal> " @@ -4911,7 +4991,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:410 +#: apt.conf.5.xml:438 msgid "" "<literal>Dir::Etc</literal> contains the location of configuration files, " "<literal>sourcelist</literal> gives the location of the sourcelist and " @@ -4921,7 +5001,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:416 +#: apt.conf.5.xml:444 msgid "" "The <literal>Dir::Parts</literal> setting reads in all the config fragments " "in lexical order from the directory specified. After this is done then the " @@ -4929,7 +5009,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:420 +#: apt.conf.5.xml:448 msgid "" "Binary programs are pointed to by <literal>Dir::Bin</literal>. <literal>Dir::" "Bin::Methods</literal> specifies the location of the method handlers and " @@ -4940,7 +5020,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:428 +#: apt.conf.5.xml:456 msgid "" "The configuration item <literal>RootDir</literal> has a special meaning. If " "set, all paths in <literal>Dir::</literal> will be relative to " @@ -4953,12 +5033,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:441 +#: apt.conf.5.xml:469 msgid "APT in DSelect" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:443 +#: apt.conf.5.xml:471 msgid "" "When APT is used as a &dselect; method several configuration directives " "control the default behaviour. These are in the <literal>DSelect</literal> " @@ -4966,12 +5046,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:447 +#: apt.conf.5.xml:475 msgid "Clean" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:448 +#: apt.conf.5.xml:476 msgid "" "Cache Clean mode; this value may be one of always, prompt, auto, pre-auto " "and never. always and prompt will remove all packages from the cache after " @@ -4982,50 +5062,50 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:457 +#: apt.conf.5.xml:485 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the install phase." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:461 +#: apt.conf.5.xml:489 msgid "Updateoptions" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:462 +#: apt.conf.5.xml:490 msgid "" "The contents of this variable is passed to &apt-get; as command line options " "when it is run for the update phase." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:466 +#: apt.conf.5.xml:494 msgid "PromptAfterUpdate" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:467 +#: apt.conf.5.xml:495 msgid "" "If true the [U]pdate operation in &dselect; will always prompt to continue. " "The default is to prompt only on error." msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:473 +#: apt.conf.5.xml:501 msgid "How APT calls dpkg" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:474 +#: apt.conf.5.xml:502 msgid "" "Several configuration directives control how APT invokes &dpkg;. These are " "in the <literal>DPkg</literal> section." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:479 +#: apt.conf.5.xml:507 msgid "" "This is a list of options to pass to dpkg. The options must be specified " "using the list notation and each list item is passed as a single argument to " @@ -5033,17 +5113,17 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:484 +#: apt.conf.5.xml:512 msgid "Pre-Invoke" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:484 +#: apt.conf.5.xml:512 msgid "Post-Invoke" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:485 +#: apt.conf.5.xml:513 msgid "" "This is a list of shell commands to run before/after invoking &dpkg;. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -5052,12 +5132,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:491 +#: apt.conf.5.xml:519 msgid "Pre-Install-Pkgs" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:492 +#: apt.conf.5.xml:520 msgid "" "This is a list of shell commands to run before invoking dpkg. Like " "<literal>options</literal> this must be specified in list notation. The " @@ -5067,7 +5147,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:498 +#: apt.conf.5.xml:526 msgid "" "Version 2 of this protocol dumps more information, including the protocol " "version, the APT configuration space and the packages, files and versions " @@ -5077,36 +5157,36 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:505 +#: apt.conf.5.xml:533 msgid "Run-Directory" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:506 +#: apt.conf.5.xml:534 msgid "" "APT chdirs to this directory before invoking dpkg, the default is <filename>/" "</filename>." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:510 +#: apt.conf.5.xml:538 msgid "Build-options" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:511 +#: apt.conf.5.xml:539 msgid "" "These options are passed to &dpkg-buildpackage; when compiling packages, the " "default is to disable signing and produce all binaries." msgstr "" #. type: Content of: <refentry><refsect1><refsect2><title> -#: apt.conf.5.xml:516 +#: apt.conf.5.xml:544 msgid "dpkg trigger usage (and related options)" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:517 +#: apt.conf.5.xml:545 msgid "" "APT can call dpkg in a way so it can make aggressive use of triggers over " "multiply calls of dpkg. Without further options dpkg will use triggers only " @@ -5121,7 +5201,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para><literallayout> -#: apt.conf.5.xml:532 +#: apt.conf.5.xml:560 #, no-wrap msgid "" "DPkg::NoTriggers \"true\";\n" @@ -5131,7 +5211,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:526 +#: apt.conf.5.xml:554 msgid "" "Note that it is not guaranteed that APT will support these options or that " "these options will not cause (big) trouble in the future. If you have " @@ -5145,12 +5225,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:538 +#: apt.conf.5.xml:566 msgid "DPkg::NoTriggers" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:539 +#: apt.conf.5.xml:567 msgid "" "Add the no triggers flag to all dpkg calls (except the ConfigurePending " "call). See &dpkg; if you are interested in what this actually means. In " @@ -5162,12 +5242,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:546 +#: apt.conf.5.xml:574 msgid "PackageManager::Configure" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:547 +#: apt.conf.5.xml:575 msgid "" "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " "and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default " @@ -5183,12 +5263,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:557 +#: apt.conf.5.xml:585 msgid "DPkg::ConfigurePending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:558 +#: apt.conf.5.xml:586 msgid "" "If this option is set apt will call <command>dpkg --configure --pending</" "command> to let dpkg handle all required configurations and triggers. This " @@ -5199,12 +5279,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:564 +#: apt.conf.5.xml:592 msgid "DPkg::TriggersPending" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:565 +#: apt.conf.5.xml:593 msgid "" "Useful for <literal>smart</literal> configuration as a package which has " "pending triggers is not considered as <literal>installed</literal> and dpkg " @@ -5214,12 +5294,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:570 +#: apt.conf.5.xml:598 msgid "PackageManager::UnpackAll" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:571 +#: apt.conf.5.xml:599 msgid "" "As the configuration can be deferred to be done at the end by dpkg it can be " "tried to order the unpack series only by critical needs, e.g. by Pre-" @@ -5231,12 +5311,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term> -#: apt.conf.5.xml:578 +#: apt.conf.5.xml:606 msgid "OrderList::Score::Immediate" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:586 +#: apt.conf.5.xml:614 #, no-wrap msgid "" "OrderList::Score {\n" @@ -5248,7 +5328,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:579 +#: apt.conf.5.xml:607 msgid "" "Essential packages (and there dependencies) should be configured immediately " "after unpacking. It will be a good idea to do this quite early in the " @@ -5262,12 +5342,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:599 +#: apt.conf.5.xml:627 msgid "Periodic and Archives options" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:600 +#: apt.conf.5.xml:628 msgid "" "<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups " "of options configure behavior of apt periodic updates, which is done by " @@ -5276,12 +5356,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:608 +#: apt.conf.5.xml:636 msgid "Debug options" msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:610 +#: apt.conf.5.xml:638 msgid "" "Enabling options in the <literal>Debug::</literal> section will cause " "debugging information to be sent to the standard error stream of the program " @@ -5292,7 +5372,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:621 +#: apt.conf.5.xml:649 msgid "" "<literal>Debug::pkgProblemResolver</literal> enables output about the " "decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</" @@ -5300,7 +5380,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:629 +#: apt.conf.5.xml:657 msgid "" "<literal>Debug::NoLocking</literal> disables all file locking. This can be " "used to run some operations (for instance, <literal>apt-get -s install</" @@ -5308,7 +5388,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:638 +#: apt.conf.5.xml:666 msgid "" "<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each " "time that <literal>apt</literal> invokes &dpkg;." @@ -5318,120 +5398,120 @@ msgstr "" #. motivating example, except I haven't a clue why you'd want #. to do this. #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:646 +#: apt.conf.5.xml:674 msgid "" "<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data " "in CDROM IDs." msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:656 +#: apt.conf.5.xml:684 msgid "A full list of debugging options to apt follows." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:661 +#: apt.conf.5.xml:689 #, fuzzy msgid "<literal>Debug::Acquire::cdrom</literal>" msgstr "a linha <literal>Archive:</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:665 +#: apt.conf.5.xml:693 msgid "" "Print information related to accessing <literal>cdrom://</literal> sources." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:672 +#: apt.conf.5.xml:700 #, fuzzy msgid "<literal>Debug::Acquire::ftp</literal>" msgstr "a linha <literal>Archive:</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:676 +#: apt.conf.5.xml:704 msgid "Print information related to downloading packages using FTP." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:683 +#: apt.conf.5.xml:711 #, fuzzy msgid "<literal>Debug::Acquire::http</literal>" msgstr "a linha <literal>Archive:</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:687 +#: apt.conf.5.xml:715 msgid "Print information related to downloading packages using HTTP." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:694 +#: apt.conf.5.xml:722 #, fuzzy msgid "<literal>Debug::Acquire::https</literal>" msgstr "a linha <literal>Archive:</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:698 +#: apt.conf.5.xml:726 msgid "Print information related to downloading packages using HTTPS." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:705 +#: apt.conf.5.xml:733 #, fuzzy msgid "<literal>Debug::Acquire::gpgv</literal>" msgstr "a linha <literal>Archive:</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:709 +#: apt.conf.5.xml:737 msgid "" "Print information related to verifying cryptographic signatures using " "<literal>gpg</literal>." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:716 +#: apt.conf.5.xml:744 #, fuzzy msgid "<literal>Debug::aptcdrom</literal>" msgstr "a linha <literal>Version:</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:720 +#: apt.conf.5.xml:748 msgid "" "Output information about the process of accessing collections of packages " "stored on CD-ROMs." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:727 +#: apt.conf.5.xml:755 #, fuzzy msgid "<literal>Debug::BuildDeps</literal>" msgstr "a linha <literal>Label:</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:730 +#: apt.conf.5.xml:758 msgid "Describes the process of resolving build-dependencies in &apt-get;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:737 +#: apt.conf.5.xml:765 #, fuzzy msgid "<literal>Debug::Hashes</literal>" msgstr "a linha <literal>Label:</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:740 +#: apt.conf.5.xml:768 msgid "" "Output each cryptographic hash that is generated by the <literal>apt</" "literal> libraries." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:747 +#: apt.conf.5.xml:775 #, fuzzy msgid "<literal>Debug::IdentCDROM</literal>" msgstr "a linha <literal>Label:</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:750 +#: apt.conf.5.xml:778 msgid "" "Do not include information from <literal>statfs</literal>, namely the number " "of used and free blocks on the CD-ROM filesystem, when generating an ID for " @@ -5439,99 +5519,99 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:758 +#: apt.conf.5.xml:786 #, fuzzy msgid "<literal>Debug::NoLocking</literal>" msgstr "a linha <literal>Origin:</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:761 +#: apt.conf.5.xml:789 msgid "" "Disable all file locking. For instance, this will allow two instances of " "<quote><literal>apt-get update</literal></quote> to run at the same time." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:769 +#: apt.conf.5.xml:797 #, fuzzy msgid "<literal>Debug::pkgAcquire</literal>" msgstr "a linha <literal>Archive:</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:773 +#: apt.conf.5.xml:801 msgid "Log when items are added to or removed from the global download queue." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:780 +#: apt.conf.5.xml:808 #, fuzzy msgid "<literal>Debug::pkgAcquire::Auth</literal>" msgstr "a linha <literal>Archive:</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:783 +#: apt.conf.5.xml:811 msgid "" "Output status messages and errors related to verifying checksums and " "cryptographic signatures of downloaded files." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:790 +#: apt.conf.5.xml:818 #, fuzzy msgid "<literal>Debug::pkgAcquire::Diffs</literal>" msgstr "a linha <literal>Archive:</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:793 +#: apt.conf.5.xml:821 msgid "" "Output information about downloading and applying package index list diffs, " "and errors relating to package index list diffs." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:801 +#: apt.conf.5.xml:829 #, fuzzy msgid "<literal>Debug::pkgAcquire::RRed</literal>" msgstr "a linha <literal>Archive:</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:805 +#: apt.conf.5.xml:833 msgid "" "Output information related to patching apt package lists when downloading " "index diffs instead of full indices." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:812 +#: apt.conf.5.xml:840 #, fuzzy msgid "<literal>Debug::pkgAcquire::Worker</literal>" msgstr "a linha <literal>Archive:</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:816 +#: apt.conf.5.xml:844 msgid "" "Log all interactions with the sub-processes that actually perform downloads." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:823 +#: apt.conf.5.xml:851 msgid "<literal>Debug::pkgAutoRemove</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:827 +#: apt.conf.5.xml:855 msgid "" "Log events related to the automatically-installed status of packages and to " "the removal of unused packages." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:834 +#: apt.conf.5.xml:862 msgid "<literal>Debug::pkgDepCache::AutoInstall</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:837 +#: apt.conf.5.xml:865 msgid "" "Generate debug messages describing which packages are being automatically " "installed to resolve dependencies. This corresponds to the initial auto-" @@ -5541,12 +5621,12 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:848 +#: apt.conf.5.xml:876 msgid "<literal>Debug::pkgDepCache::Marker</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:851 +#: apt.conf.5.xml:879 msgid "" "Generate debug messages describing which package is marked as keep/install/" "remove while the ProblemResolver does his work. Each addition or deletion " @@ -5563,96 +5643,96 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:870 +#: apt.conf.5.xml:898 #, fuzzy msgid "<literal>Debug::pkgInitConfig</literal>" msgstr "a linha <literal>Version:</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:873 +#: apt.conf.5.xml:901 msgid "Dump the default configuration to standard error on startup." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:880 +#: apt.conf.5.xml:908 #, fuzzy msgid "<literal>Debug::pkgDPkgPM</literal>" msgstr "a linha <literal>Package:</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:883 +#: apt.conf.5.xml:911 msgid "" "When invoking &dpkg;, output the precise command line with which it is being " "invoked, with arguments separated by a single space character." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:891 +#: apt.conf.5.xml:919 msgid "<literal>Debug::pkgDPkgProgressReporting</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:894 +#: apt.conf.5.xml:922 msgid "" "Output all the data received from &dpkg; on the status file descriptor and " "any errors encountered while parsing it." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:901 +#: apt.conf.5.xml:929 #, fuzzy msgid "<literal>Debug::pkgOrderList</literal>" msgstr "a linha <literal>Origin:</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:905 +#: apt.conf.5.xml:933 msgid "" "Generate a trace of the algorithm that decides the order in which " "<literal>apt</literal> should pass packages to &dpkg;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:913 +#: apt.conf.5.xml:941 #, fuzzy msgid "<literal>Debug::pkgPackageManager</literal>" msgstr "a linha <literal>Package:</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:917 +#: apt.conf.5.xml:945 msgid "" "Output status messages tracing the steps performed when invoking &dpkg;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:924 +#: apt.conf.5.xml:952 #, fuzzy msgid "<literal>Debug::pkgPolicy</literal>" msgstr "a linha <literal>Label:</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:928 +#: apt.conf.5.xml:956 msgid "Output the priority of each package list on startup." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:934 +#: apt.conf.5.xml:962 msgid "<literal>Debug::pkgProblemResolver</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:938 +#: apt.conf.5.xml:966 msgid "" "Trace the execution of the dependency resolver (this applies only to what " "happens when a complex dependency problem is encountered)." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:946 +#: apt.conf.5.xml:974 msgid "<literal>Debug::pkgProblemResolver::ShowScores</literal>" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:949 +#: apt.conf.5.xml:977 msgid "" "Display a list of all installed packages with their calculated score used by " "the pkgProblemResolver. The description of the package is the same as " @@ -5660,33 +5740,33 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt.conf.5.xml:957 +#: apt.conf.5.xml:985 #, fuzzy msgid "<literal>Debug::sourceList</literal>" msgstr "a linha <literal>Version:</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:961 +#: apt.conf.5.xml:989 msgid "" "Print information about the vendors read from <filename>/etc/apt/vendors." "list</filename>." msgstr "" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:983 +#: apt.conf.5.xml:1012 msgid "" "&configureindex; is a configuration file showing example values for all " "possible options." msgstr "" #. type: Content of: <refentry><refsect1><variablelist> -#: apt.conf.5.xml:990 +#: apt.conf.5.xml:1019 msgid "&file-aptconf;" msgstr "" #. ? reading apt.conf #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:995 +#: apt.conf.5.xml:1024 #, fuzzy msgid "&apt-cache;, &apt-config;, &apt-preferences;." msgstr "&apt-get; &apt-cache; &apt-conf; &sources-list;" @@ -8449,7 +8529,8 @@ msgstr "" #~ " \n" #~ " <VarListEntry><term><option/-o/</><term><option/--option/</>\n" #~ " <ListItem><Para>\n" -#~ " Set a Configuration Option; This will set an arbitary configuration \n" +#~ " Set a Configuration Option; This will set an arbitary " +#~ "configuration \n" #~ " option. The syntax is <option>-o Foo::Bar=bar</>.\n" #~ " </VarListEntry>\n" #~ msgstr "" -- cgit v1.2.3