<!-- -*- mode: sgml; mode: fold -*- -->
<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V3.1//EN" [

<!ENTITY % aptent SYSTEM "apt.ent">
%aptent;

]>

<refentry>
 &apt-docinfo;

 <refmeta>
   <refentrytitle>apt_preferences</>
   <manvolnum>5</>
 </refmeta>

 <!-- Man page title -->
 <refnamediv>
    <refname>apt_preferences</>
    <refpurpose>Preference control file for APT</>
 </refnamediv>

<RefSect1><Title>Description</>
<para>
The APT preferences file <filename>/etc/apt/preferences</>
can be used to control which version of a package will be selected
for installation.
</para>

<para>Several versions of a package may be available for installation when
the &sources-list; file contains references to more than one distribution
(for example, <literal>stable</literal> and <literal>testing</literal>);
furthermore, several instances of the same version of a package may be
available when the file contains references to more than one download site
for a particular distribution.  APT assigns a "priority" to each instance
that is available.  (In what follows, an "instance" will be an instance of
a package that is available according to &sources-list;.)
Subject to dependency constraints, <command>apt-get</command> installs the
instance with the highest priority.  If two instances have the same
priority then it installs the more recent one, that is, the one with the
higher version number.
</para>

<para>The APT preferences file overrides the priorities that APT assigns
to package instances by default, thus giving the user control over which
one is selected for installation.
</para>

<RefSect2><Title>APT's Default Priority Assignments</>

<para>If there is no preferences file, or if there is no entry in the file
that applies to a particular instance, then the priority assigned to that
instance is the priority of the distribution to which that instance
belongs.  It is possible to single out a distribution, called the
"target release", which receives a higher priority than other distributions.
The target release can be set on the <command>apt-get</command> command
line or in the APT configuration file <filename>/etc/apt/apt.conf</filename>.
For example,

<programlisting>
# Command to install the <literal/testing/ version of <replaceable>some-package</replaceable>
<command>apt-get install -t testing <replaceable>some-package</replaceable></command>
</programlisting>

<programlisting>
# Configuration setting to make <literal/stable/ the target release
APT::Default-Release "stable";
</programlisting>
</para>

<para>If a target release has been specified then APT uses the following
algorithm to set the priorities of the instances of a package.  Assign:

<variablelist>
<varlistentry>
<term>priority 100</term>
<listitem><simpara>to the instance that is already installed (if any).
</simpara></listitem>
</varlistentry>
<varlistentry>
<term>priority 500</term>
<listitem><simpara>to the instances that are not installed
and do not belong to the target release.
</simpara></listitem>
</varlistentry>
<varlistentry>
<term>priority 990</term>
<listitem><simpara>to the instances that are not installed
and belong to the target release.
</simpara></listitem>
</varlistentry>
</variablelist>
</para>

<para>If no target release has been specified then APT simply assigns
priority 100 to all installed package instances and priority 500 to all
uninstalled package instances.
</para>

<para>APT then applies the following rules, listed in order of precedence,
to determine which instance of a package to install.

<itemizedlist>
<listitem><simpara>Never downgrade unless the priority of an available instance
exceeds 1000.  ("Downgrading" is installing a less recent version of a package
in place of a more recent version.  Note that none of APT's default priorities
exceeds 1000; such high priorities can only be set in the preferences file.)
</simpara></listitem>
<listitem><simpara>Install the highest priority instance.
</simpara></listitem>
<listitem><simpara>If two or more instances have the same priority,
install the most recent one.
</simpara></listitem>
<listitem><simpara>If two or more instances have the same version number,
install the one whose source is listed earliest in &sources-list;.
(The installed instance, if there is one, is always preferred in such a
comparison unless <command>apt-get --reinstall</command> is used.)
</simpara></listitem>
</itemizedlist>
</para>

<para>In a typical situation, the installed instance of a package (priority 100)
is not as recent as one of the instances available from the sources listed in
the &sources-list; file (priority 500 or 990).  Then the package will be
upgraded with the command:
<command>apt-get install</command> or <command>apt-get dist-upgrade</command>.
</para>

<para>Rarely, the installed instance of a package is <emphasis/more/ recent
than any of the other available instances.  The package will not be downgraded.
</para>

<para>Sometimes the installed instance of a package is more recent than the
version belonging to the target release, but not as recent as a version
belonging to some other distribution.  Such a package will indeed be upgraded,
because at least <emphasis/one/ of the available instances has a higher
priority than the installed instance.
</para>

</RefSect2>

<RefSect2><Title>The Effect of APT Preferences</>

<para>The APT preferences file allows the system administrator to customize
priorities.  The file consists of one or more multi-line records separated
by blank lines.  Records can have one of two forms, a specific form and a
general form.
<itemizedlist>
<listitem>
<simpara>The "specific" form pins a priority (a "Pin-Priority") to a
specified package and specified version or version range.  For
example, the following record pins a high priority to all versions of
the <filename/perl/ package whose version number begins with
"<literal/5.8/".
</simpara>

<programlisting>
Package: perl
Pin: version 5.8*
Pin-Priority: 1001
</programlisting>
</listitem>

<listitem><simpara>
The "general" form pins a priority to all of the package versions in a
given distribution (that is, to all the versions of packages that are
listed in a certain <filename/Release/ file), or to all of the package
instances coming from a particular Internet site, as identified by its
fully qualified domain name.
</simpara>

<simpara>This general-form entry in the APT preferences file applies only
to groups of packages.  For example, the following record causes APT to
assign a high priority to all package instances available from the local
site.
</simpara>

<programlisting>
Package: *
Pin: origin ""
Pin-Priority: 999
</programlisting>

<simpara>A note of caution: the keyword used here is "<literal/origin/".
This should not be confused with the "Origin:" of a distribution as
specified in a <filename/Release/ file.  What follows the "Origin:" tag
in a <filename/Release/ file is usually not an Internet site address
but an author or vendor name, such as "Debian" or "Ximian".
</simpara>

<simpara>The following record causes APT to assign a low priority to all
package versions belonging to any distribution whose "Archive"
(<literal/a/) name is "<literal/unstable/".
</simpara>

<programlisting>
Package: *
Pin: release a=unstable
Pin-Priority: 50
</programlisting>

<simpara>The following record causes APT to assign a high priority to all
package versions belonging to any release whose "Archive" (<literal/a/)
name is "<literal/stable/" and whose release "Version" (<literal/v/)
number is "<literal/3.0/".
</simpara>

<programlisting>
Package: *
Pin: release a=unstable, v=3.0
Pin-Priority: 50
</programlisting>
</listitem>
</itemizedlist>
</para>

</RefSect2>

<RefSect2><Title>How APT Interprets Priorities</Title>

<para>Priorities (P) assigned in the APT preferences file must be positive
or negative integers.  They are interpreted as follows (roughly speaking):

<variablelist>
<varlistentry><term>P &gt; 1000</term>
<listitem><simpara>causes an instance to be installed
even if this constitutes a downgrade of the package
</simpara></listitem>
</varlistentry>
<varlistentry><term>990 &lt; P &lt;=1000</term>
<listitem><simpara>causes an instance to be installed
even if it does not come from the target release,
unless the installed instance is more recent
</simpara></listitem>
</varlistentry>
<varlistentry><term>500 &lt; P &lt;=990</term>
<listitem><simpara>causes an instance to be installed
unless there is an instance available belonging to the target release
or the installed version is more recent
</simpara></listitem>
</varlistentry>
<varlistentry><term>100 &lt; P &lt;=500</term>
<listitem><simpara>causes an instance to be installed
unless there is an instance available belonging to some other
distribution or the installed version is more recent
</simpara></listitem>
<varlistentry><term>0 &lt;= P &lt;=100</term>
<listitem><simpara>causes an instance to be installed
only if there is no installed instance of the package
</simpara></listitem>
</varlistentry>
<varlistentry><term>P &lt; 0</term>
<listitem><simpara>prevents the instance from being installed
</simpara></listitem>
</varlistentry>
</variablelist>
</para>

<para>If one of the specific-form records described above matches an
available package instance, then that record determines the priority of
the instance.  If two specific-form records match an available instance,
then the first record encountered determines the priority.  If two
general-form records match an available instance, then the first record
encountered determines the priority.
</para>

<para>For example, suppose the APT preferences file contains the three
records presented earlier:

<programlisting>
Package: perl
Pin: version 5.8*
Pin-Priority: 1001

Package: *
Pin: origin ""
Pin-Priority: 999

Package: *
Pin: release unstable
Pin-Priority: 50
</programlisting>

Then:

<itemizedlist>
<listitem><simpara>The most recent available version of the <literal/perl/
package will be installed, so long as that version's version number begins
with "<literal/5.8/".  If <emphasis/any/ 5.8* version of <literal/perl/ is
available and the installed version is 5.9*, then <literal/perl/ will be
downgraded.</simpara></listitem>
<listitem><simpara>An instance of any package other than <literal/perl/
that is available from the local system has priority over other instances,
even instances belonging to the target release.
</simpara></listitem>
<listitem><simpara>An instance of a package whose origin is not the local
system but some other site listed in &sources-list;, and which belongs to
an "<literal/unstable/" distribution, is only installed if it is selected
for installation and no instance of the package is already installed.
</simpara></listitem>
</itemizedlist>
</para>
</RefSect2>

<RefSect2><Title>Determination of Package Version and Distribution Properties</Title>

<para>The locations listed in a system's &sources-list; file should provide
<filename>Packages</filename> and <filename>Release</filename> files
to describe the package instances available at that location.
</para>

<para>The <filename>Packages</filename> file is normally found in the directory
<filename>.../dists/<replaceable>dist-name</replaceable>/<replaceable>component</replaceable>/<replaceable>arch</replaceable></filename>:
for example, <filename>.../dists/stable/main/binary-i386/Packages</filename>.
It consists of a series of multi-line records, one for each package available
in that directory.  Only two lines in each record are relevant for setting
APT priorities:
<variablelist>
<varlistentry>
<term>the <literal/Package:/ line</term>
<listitem><simpara>gives the package name</simpara></listitem>
</varlistentry>
<varlistentry>
<term>the <literal/Version:/ line</term>
<listitem><simpara>gives the version number for the named package</simpara></listitem>
</varlistentry>
</variablelist>
</para>

<para>The <filename>Release</filename> file is normally found in the directory
<filename>.../dists/<replaceable>dist-name</replaceable></filename>:
for example, <filename>.../dists/stable/Release</filename>,
or <filename>.../dists/woody/Release</filename>.
It consists of a single multi-line record which applies to <emphasis/all/ of
the package instances in the directory tree below its parent.  Unlike the
<filename/Packages/ file, nearly all of the lines in a <filename/Release/
file are relevant for setting APT priorities:

<variablelist>
<varlistentry>
<term>the <literal/Archive:/ line</term>
<listitem><simpara>names the archive to which all the package instances
in the directory tree belong.  For example, the line
<literal/Archive: stable/ specifies that all of the packages in the directory
tree below the parent of the <filename/Release/ file are in the
<literal/stable/ archive.  Specifying this value in the APT preferences file
would require the line:
</simpara>

<programlisting>
Pin: release a=stable
</programlisting>
</listitem>
</varlistentry>

<varlistentry>
<term>the <literal/Version:/ line</term>
<listitem><simpara>names the release version.  For example, the
package instances in the tree might belong to Debian GNU/Linux release
version 3.0.  There is normally no version number for the "testing" and
"unstable" distributions because they have not yet been released.
Specifying this in the APT preferences file would require one of the
following lines.
</simpara>

<programlisting>
Pin: release v=3.0
Pin: release a=stable v=3.0
Pin: release 3.0
</programlisting>

</listitem>
</varlistentry>

<varlistentry>
<term>the <literal/Component:/ line</term>
<listitem><simpara>names the licensing component associated with the
package instances in the directory tree of the <filename/Release/
file.  For example, the line <literal/Component: main/ specifies that
all the instances in the directory tree are from the <literal/main/
component, meaning that they are licensed under terms listed in the
Debian Free Software Guidelines.  Specifying this component in the
APT preferences file would require the line:
</simpara>

<programlisting>
Pin: release c=main
</programlisting>
</listitem>
</varlistentry>

<varlistentry>
<term>the <literal/Origin:/ line</term>
<listitem><simpara>names the producer of the package instances in the
directory tree of the <filename/Release/ file.  Most commonly, this is
<literal/Debian/.  Specifying this origin in the APT preferences file
would require the line:
</simpara>

<programlisting>
Pin: release o=Debian
</programlisting>
</listitem>
</varlistentry>

<varlistentry>
<term>the <literal/Label:/ line</term>
<listitem><simpara>seems redundant.  Most commonly, this is
<literal/Debian/.  Specifying this label in the APT preferences file
would require the line:
</simpara>

<programlisting>
Pin: release l=Debian
</programlisting>
</listitem>
</varlistentry>
</variablelist>
</para>

<para>All of the <filename>Packages</filename> and <filename>Release</filename>
files retrieved from locations listed in the &sources-list; file are kept
in the directory <filename>/var/lib/apt/lists</filename>, or in the file named
by the variable <literal/Dir::State::Lists/ in the <filename/apt.conf/ file.
For example, the file
<filename>debian.lcs.mit.edu_debian_dists_unstable_contrib_binary-i386_Release</filename>
contains the <filename>Release</filename> file retrieved from the site
<literal/debian.lcs.mit.edu/ for <literal/binary-i386/ architecture
files from the <literal/contrib/ component of the <literal/unstable/
distribution.
</para>

</RefSect2>

<RefSect2><Title>Optional Lines in an APT Preferences Record</Title>

<para>Each record in the APT preferences file can optionally begin with
one or more lines beginning with the word <literal/Explanation:/.
This provides an opportunity to comment on the record.
</para>

<para>The <literal/Pin-Priority:/ line in each APT preferences record is
optional.  If omitted, APT assigs a priority of 1 less than the last value
specified on a line beginning with <literal/Pin-Priority: release .../.
</para>
</RefSect2>
</RefSect1>

<RefSect1><Title>Examples</>
<RefSect2><Title>Tracking Stable</Title>

<para>The following APT preferences file will cause APT to assign a
priority higher than the default (500) to all package versions belonging
to a <literal/stable/ distribution and a prohibitively low priority to
package versions belonging to other <literal/Debian/ distributions.

<programlisting>
Package: *
Pin: release a=stable
Pin-Priority: 900

Explanation: Uninstall or do not install any Debian-originated
Explanation: instances other than those in the stable distro
Package: *
Pin: release o=Debian
Pin-Priority: -10
</programlisting>
</para>

<para>
With a suitable &sources-list; file and the above preferences file,
any of the following commands will cause APT to upgrade to the
latest <literal/stable/ version(s).

<programlisting>
apt-get install <replaceable>package-name</replaceable>
apt-get upgrade
apt-get dist-upgrade
</programlisting>
</para>

<para>The following command will cause APT to upgrade the specified
package to the latest version from the <literal/testing/ distribution;
further upgrades will not occur automatically, however.

<programlisting>
apt-get install <replaceable>package</replaceable>/testing
</programlisting>
</RefSect2>

 <RefSect2><Title>Tracking Testing</Title>

<para>The following APT preferences file will cause APT to assign
a high priority to package versions from the <literal/testing/
distribution, a lesser priority to package versions from the
<literal/unstable/ distribution, and a prohibitively low priority
to package versions from other <literal/Debian/ distributions.

<programlisting>
Package: *
Pin: release a=testing
Pin-Priority: 900

Package: *
Pin: release a=unstable
Pin-Priority: 800

Package: *
Pin: release o=Debian
Pin-Priority: -10
</programlisting>
</para>

<para>
With the above APT preferences file, any of the
following commands will cause APT to upgrade to the latest
<literal/testing/ version(s).

<programlisting>
apt-get install <replaceable>package-name</replaceable>
apt-get upgrade
apt-get dist-upgrade
</programlisting>
</para>

<para>The following command will cause APT to upgrade the specified
package to the latest version from the <literal/unstable/ distribution.
Thereafter, <command>apt-get dist-upgrade</command> and the others
<emphasis/will/ cause upgrade of the package to the latest
<literal/unstable/ version.

<programlisting>
apt-get install <replaceable>package</replaceable>/unstable
</programlisting>
</para>

</RefSect2>
</RefSect1>

 <RefSect1><Title>See Also</>
<para>
&apt-get; &apt-cache; &apt-conf; &sources-list;
 </RefSect1>

 &manbugs;
 &manauthor;

</refentry>