<!-- -*- mode: sgml; mode: fold -*- --> <!-- translation of version 1.12 --> <!doctype refentry PUBLIC "-//OASIS//DTD DocBook V3.1//EN" [ <!ENTITY % aptent SYSTEM "apt.ent.ja"> %aptent; ]> <refentry lang=ja> &apt-docinfo; <refmeta> <refentrytitle>apt-get</> <manvolnum>8</> </refmeta> <!-- Man page title --> <refnamediv> <refname>apt-get</> <!-- <refpurpose>APT package handling utility - - command-line interface</> --> <refpurpose>APT �ѥå��������桼�ƥ���ƥ� -- ���ޥ�ɥ饤���ե�����</> </refnamediv> <!-- Arguments --> <refsynopsisdiv> <cmdsynopsis> <command>apt-get</> <arg><option>-hvs</></arg> <arg><option>-o=<replaceable/config string/</></arg> <arg><option>-c=<replaceable/file/</></arg> <group choice=req> <arg>update</> <arg>upgrade</> <arg>dselect-upgrade</> <arg>install <arg choice="plain" rep="repeat"><replaceable>pkg</replaceable></arg></arg> <arg>remove <arg choice="plain" rep="repeat"><replaceable>pkg</replaceable></arg></arg> <arg>source <arg choice="plain" rep="repeat"><replaceable>pkg</replaceable></arg></arg> <arg>build-dep <arg choice="plain" rep="repeat"><replaceable>pkg</replaceable></arg></arg> <arg>check</> <arg>clean</> <arg>autoclean</> </group> </cmdsynopsis> </refsynopsisdiv> <!-- <RefSect1><Title>Description</> --> <RefSect1><Title>����</> <para> <!-- <command/apt-get/ is the command-line tool for handling packages, and may be considered the user's "back-end" to other tools using the APT library. --> <command/apt-get/ �ϥѥå����������륳�ޥ�ɥ饤��ġ���ǡ� APT �饤�֥����Ѥ���¾�Υġ���Υ桼��¦�Хå�����ɤȤ⤤�����ΤǤ��� </para> <para> <!-- Unless the <option/-h/, or <option/- -help/ option is given one of the commands below must be present. --> <option/-h/ �� <option/--help/ ��������ʲ��˵륳�ޥ�ɤ�ɬ�פǤ��� </para> <VariableList> <VarListEntry><Term>update</Term> <ListItem><Para> <!-- <literal/update/ is used to resynchronize the package index files from their sources. The indexes of available packages are fetched from the location(s) specified in <filename>/etc/apt/sources.list</>. For example, when using a Debian archive, this command retrieves and scans the <filename>Packages.gz</> files, so that information about new and updated packages is available. An <literal/update/ should always be performed before an <literal/upgrade/ or <literal/dist-upgrade/. Please be aware that the overall progress meter will be incorrect as the size of the package files cannot be known in advance. --> <literal/update/ �Ϥ��줾�����������ѥå���������ǥå����ե������ ��Ʊ����Ԥ��Τ˻��Ѥ��ޤ������Ѳ�ǽ�ʥѥå������Υ���ǥå����� <filename>/etc/apt/sources.list</> �˵��Ҥ�����꤫��������ޤ��� �㤨�� Debian archive �����Ѥ���ݡ����Υ��ޥ�ɤ� <filename>Packages.gz</> �ե���������뤳�Ȥǡ������ޤ��Ϲ������줿�ѥå������ξ������Ѳ�ǽ �Ȥʤ�ޤ���<literal/update/ �� <literal/upgrade/ �� <literal/dist-upgrade/ ��Ԥ����˾�˼¹Ԥ���٤��Ǥ��� ����äƥѥå������ե�����Υ��������Τ뤳�Ȥ��Ǥ��ʤ����ᡢ ���ΤΥץ����쥹�����������ɽ������ޤ��� </Para></ListItem> </VarListEntry> <VarListEntry><Term>upgrade</Term> <ListItem><Para> <!-- <literal/upgrade/ is used to install the newest versions of all packages currently installed on the system from the sources enumerated in <filename>/etc/apt/sources.list</>. Packages currently installed with new versions available are retrieved and upgraded; under no circumstances are currently installed packages removed, or packages not already installed retrieved and installed. New versions of currently installed packages that cannot be upgraded without changing the install status of another package will be left at their current version. An <literal/update/ must be performed first so that <command/apt-get/ knows that new versions of packages are available. --> <literal/upgrade/ �ϡ����ߥ����ƥ�˥��ȡ��뤵��Ƥ������ѥå������� �ǿ��С�������<filename>/etc/apt/sources.list</> ��������������� ���ȡ��뤹��Τ˻��Ѥ��ޤ������ߥ��ȡ�����Υѥå������˿����� �С��������й������ޤ����������ʤ���⸽�ߥ��ȡ������ �ѥå������κ���ϹԤ��ޤ����оݤΥѥå������� ¾�Υѥå������Υ��ȡ�����֤��ѹ������˹����Ǥ��ʤ����ϡ� ���ߤΥС������ΤޤޤȤʤ�ޤ��� <literal/update/ ��Ϥ���˼¹Ԥ��Ƥ����ơ�<command/apt-get/ �� �ѥå������ο������С���������ѤǤ��뤳�Ȥ��Τ餻��ɬ�פ�����ޤ��� </Para></ListItem> </VarListEntry> <VarListEntry><Term>dselect-upgrade</Term> <ListItem><Para> <!-- is used in conjunction with the traditional Debian GNU/Linux packaging front-end, &dselect;. <literal/dselect-upgrade/ follows the changes made by &dselect; to the <literal/Status/ field of available packages, and performs the actions necessary to realize that state (for instance, the removal of old and the installation of new packages). --> ����Ū�� Debian GNU/Linux �ѥå����������ե���ȥ���ɤ� &dselect; �ȶ��˻��Ѥ���ޤ���<literal/dselect-upgrade/ �� &dselect; �Ǻ��줿 ���Ѳ�ǽ�ѥå������� <literal/Status/ �ե�����ɤ��ѹ������פ��� ���ξ��֤�ȿ�Ǥ�����Τ�ɬ�פʥ���������¹Ԥ��ޤ��� (�㤨�С��Ť��ѥå������κ���俷�����ѥå������Υ��ȡ���ʤ�) </Para></ListItem> </VarListEntry> <VarListEntry><Term>dist-upgrade</Term> <ListItem><Para> <!-- <literal/dist-upgrade/, in addition to performing the function of <literal/upgrade/, also intelligently handles changing dependencies with new versions of packages; <command/apt-get/ has a "smart" conflict resolution system, and it will attempt to upgrade the most important packages at the expense of less important ones if necessary. The <filename>/etc/apt/sources.list</> file contains a list of locations from which to retrieve desired package files. --> <literal/dist-upgrade/ �� <literal/upgrade/ �ε�ǽ�˲ä������С������� �ѥå��������Ф����¸�ط����ѹ�����Ū�����ޤ��� <command/apt-get/ �ϡ��������줿�����襷���ƥ�������ɬ�פʤ� ���Ū���פǤʤ��ѥå����������ˤ��ơ��ǽ��ץѥå������ι����� ��ߤޤ��� <filename>/etc/apt/sources.list</> �ե������ɬ�פʥѥå������ե������ ����������Υꥹ�Ȥ��ޤޤ�Ƥ��ޤ��� </Para></ListItem> </VarListEntry> <VarListEntry><Term>install</Term> <ListItem><Para> <!-- <literal/install/ is followed by one or more packages desired for installation. Each package is a package name, not a fully qualified filename (for instance, in a Debian GNU/Linux system, libc6 would be the argument provided, not em(libc6_1.9.6-2.deb)). All packages required by the package(s) specified for installation will also be retrieved and installed. The <filename>/etc/apt/sources.list</> file is used to locate the desired packages. If a hyphen is appended to the package name (with no intervening space), the identified package will be removed if it is installed. Similarly a plus sign can be used to designate a package to install. These latter features may be used to override decisions made by apt-get's conflict resolution system. --> <literal/install/ �θ�ˤϥ��ȡ��뤹��ѥå�������1�İʾ���ꤷ�ޤ��� ���ꤹ��ѥå������ϡ������ʥե�����̾�ǤϤʤ��ѥå�����̾�Ǥ��� (�㤨�� Debian GNU/Linux �����ƥ�Ǥ� libc6_1.9.6-2.deb �ǤϤʤ� libc6 �� �����Ȥ���Ϳ���ޤ�) ���ȡ��뤹��褦���ꤷ�����٤ƤΥѥå��������Ф� ���������ȡ����Ԥ��ޤ���<filename>/etc/apt/sources.list</> �ե����� ���᤹��ѥå������ξ������ꤹ��Τ˻��Ѥ��ޤ��� �ѥå�����̾�θ���� (�����ޤޤ�) �ϥ��ե��ɲä���Ƥ����硢 ���Υѥå����������ȡ��뤵��Ƥ���к�����ޤ��� Ʊ�ͤˡ����ȡ��뤹��ѥå���������������Τ˥ץ饹�������ѤǤ��ޤ��� ����ʸ���� apt-get �ζ����襷���ƥ��Ƚ�Ǥ����Ѥ���뤫�⤷��ޤ��� </para> <para> <!-- A specific version of a package can be selected for installation by following the package name with an equals and the version of the package to select. This will cause that version to be located and selected for install. Alternatively a specific distribution can be selected by following the package name with a slash and the version of the distribution or the Archive name (stable, frozen, unstable). --> �ѥå������˥������뵭��ȥС�������³���뤳�Ȥǡ� �����С������Υѥå������ȡ��뤹�뤳�Ȥ��Ǥ��ޤ��� �Ĥޤ����ΥС������Υѥå������ȡ��뤹��褦������ ����Ȥ��������ȤǤ��� �̤���ˡ�Ȥ��Ƥϡ��ǥ����ȥ�ӥ塼���������ꤹ��Τˡ� �ѥå�����̾�θ��³���ƥ���å���ȥǥ����ȥ�ӥ塼�����ΥС������� ����������̾ (stable, frozen, unstable) �ҤǤ��ޤ��� </para> <para> �С�����������ϥ����졼�ɻ��ˤ���ѤǤ��뤿�ᡢ���դ�ʧ�ä� ���Ѥ��ʤ���Фʤ�ޤ��� </para> <para> <!-- If no package matches the given expression and the expression contains one of '.', '?' or '*' then it is assumed to be a POSIX regex and it is applied to all package names in the database. Any matches are then installed (or removed). Note that matching is done by substring so 'lo.*' matches 'how-lo' and 'lowest'. If this is undesired prefix with a '^' character. --> �⤷'.'��'?'��'*'��ޤʸ�˰�Ĥ�ѥå�����̾���ޥå����ʤ��ä���硢 POSIX ����ɽ���Ǥ���ȸ��ʤ����ǡ����١���������ѥå�����̾���Ф��� Ŭ�Ѥ��ޤ��� �ޥå������ѥå��������٤Ƥ����ȡ���(�⤷���Ϻ��)����ޤ��� ��) 'lo.*' �Τ褦��ʸ����� 'how-lo' �� 'lowest' �˥ޥå����ޤ��� �����˾�ޤʤ���С���Ƭ�� '^' ��Ĥ��Ƥ��������� </Para></ListItem> </VarListEntry> <VarListEntry><Term>remove</Term> <ListItem><Para> <!-- <literal/remove/ is identical to <literal/install/ except that packages are removed instead of installed. If a plus sign is appended to the package name (with no intervening space), the identified package will be installed. --> <literal/remove/ �� �ѥå��������������뤳�Ȥ������<literal/install/ ��Ʊ�ͤǤ��� �ץ饹���椬�ѥå�����̾�� (�֤˶����ޤޤ���) �ղä��줿��硢 ���̤��줿�ѥå������ȡ��뤷�ޤ��� </Para></ListItem> </VarListEntry> <VarListEntry><Term>source</Term> <ListItem><Para> <!-- <literal/source/ causes <command/apt-get/ to fetch source packages. APT will examine the available packages to decide which source package to fetch. It will then find and download into the current directory the newest available version of that source package. Source packages are tracked separately from binary packages via <literal/deb-src/ type lines in the &sources-list; file. This probably will mean that you will not get the same source as the package you have installed or as you could install. If the - -compile options is specified then the package will be compiled to a binary .deb using dpkg-buildpackage, if - -download-only is specified then the source package will not be unpacked. --> <literal/source/ �ϥ������ѥå��������������褦 <command/apt-get/ ���뤳�Ȥ��̣���ޤ��� APT �ϤɤΥ������ѥå�������������뤫���ꤹ��褦�����Ѳ�ǽ�ʥѥå������� ��Ƥ���ޤ��� ���θ塢�ǿ������Ѳ�ǽ�ʥ������ѥå������Ĥ��������ȥǥ��쥯�ȥ�� ����������ɤ��ޤ��� �������ѥå������ϡ��Х��ʥ�ѥå������Ȥ��̤� &sources-list; �ե������ <literal/deb-src/ �Ԥ�����פ���ޤ��� ����ϡ����ȡ��뤷�� (�ޤ��ϥ��ȡ���Ǥ���) �ѥå������ȡ� ���������Ѥ��뤳�Ȥ��Ǥ��뤳�Ȥ��Ƥ��ޤ��� --compile ���ץ�����ꤵ�줿��硢dpkg-buildpackage ���Ѥ��� �Х��ʥ� .deb �ե�����إ���ѥ����Ԥ��ޤ��� --download-only �ξ��ϥ������ѥå�������Ÿ�����ޤ��� </para> <para> <!-- A specific source version can be retrieved by postfixing the source name with an equals and then the version to fetch, similar to the mechanism used for the package files. This enables exact matching of the source package name and version, implicitly enabling the <literal/APT::Get::Only-Source/ option. --> �ѥå�������Ʊ�ͤˡ�������̾�θ���˥�������ȼ����������С������� �֤����Ȥǡ����ꤷ���С������Υ����������뤳�Ȥ��Ǥ��ޤ��� <literal/APT::Get::Only-Source/ ���ץ����ǰ��ۤΤ�����ͭ���ˤʤä� ���뤿�ᡢ�������ѥå�����̾�ȥС������˸�̩�˥ޥå�����褦�� �ʤäƤ��ޤ��� </para> <para> <!-- Note that source packages are not tracked like binary packages, they exist only in the current directory and are similar to downloading source tar balls. --> ��) tar ball �ϥ����ȥǥ��쥯�ȥ�ˤΤߥ���������ɤ��졢 �����ȥǥ��쥯�ȥ��Ÿ������ޤ��� </Para></ListItem> </VarListEntry> <VarListEntry><Term>build-dep</Term> <ListItem><Para> <!-- <literal/build-dep/ causes apt-get to install/remove packages in an attempt to satisfy the build dependencies for a source packages. --> <literal/build-dep/ �ϥ������ѥå������ι��۰�¸�ط����������褦�ˡ� �ѥå������Υ��ȡ��롦�����Ԥ��ޤ��� </Para></ListItem> </VarListEntry> <VarListEntry><Term>check</Term> <ListItem><Para> <!-- <literal/check/ is a diagnostic tool; it updates the package cache and checks for broken dependencies. --> <literal/check/ �ϡ��ѥå���������å���ι�������줿��¸�ط�������å����� ���ǥġ���Ǥ��� </Para></ListItem> </VarListEntry> <VarListEntry><Term>clean</Term> <ListItem><Para> <!-- <literal/clean/ clears out the local repository of retrieved package files. It removes everything but the lock file from <filename>&cachedir;/archives/</> and <filename>&cachedir;/archive/partial/</>. When APT is used as a &dselect; method, <literal/clean/ is run automatically. Those who do not use dselect will likely want to run <literal/apt-get clean/ from time to time to free up disk space. --> <literal/clean/ �ϼ��������ѥå������Υ��������ݥ��ȥ���ݽ����ޤ��� <filename>&cachedir;/archives/</> �� <filename>&cachedir;/archive/partial/</> ���� ���å��ե�����ʳ����٤ƺ�����ޤ��� APT �� &dselect; ����ƤФ��Ȥ��ˤϡ���ưŪ�� <literal/clean/ �� �¹Ԥ���ޤ��� dselect����Ѥ��ʤ����ϡ��ǥ��������ڡ�����������뤿�ᡢ���� <literal/apt-get clean/ ��¹Ԥ������ʤ�Ǥ��礦�� </Para></ListItem> </VarListEntry> <VarListEntry><Term>autoclean</Term> <ListItem><Para> <!-- Like <literal/clean/, <literal/autoclean/ clears out the local repository of retrieved package files. The difference is that it only removes package files that can no longer be downloaded, and are largely useless. This allows a cache to be maintained over a long period without it growing out of control. The configuration option <literal/APT::Clean-Installed/ will prevent installed packages from being erased if it is set off. --> <literal/clean/ Ʊ�͡�<literal/autoclean/ �ϼ��������ѥå������Υ������� ��ݥ��ȥ���ݽ����ޤ����㤤�ϡ��⤦����������ɤ���뤳�Ȥ��ʤ� �ѥå������ե�����䡢�ۤȤ�����פʥѥå������ե�����Τߤ������뤳�ȤǤ��� ���Τ��ᡢĹ�����֡�����å��夬�����Ǥ��������粽���뤳�Ȥʤ��� �ݻ����뤳�Ȥ��Ǥ��ޤ��� ���ꥪ�ץ���� <literal/APT::Clean-Installed/ �� off �����åȤ��Ƥ���С� ���ȡ���ѤΥѥå������ե����뤬��������Τ��ɤ����Ȥ��Ǥ��ޤ��� </Para></ListItem> </VarListEntry> </VariableList> </RefSect1> <RefSect1><Title>���ץ����</> &apt-cmdblurb; <VariableList> <VarListEntry><term><option/-d/</><term><option/--download-only/</> <ListItem><Para> <!-- Download only; package files are only retrieved, not unpacked or installed. Configuration Item: <literal/APT::Get::Download-Only/. --> ����������ɤΤ� - �ѥå������ե�����μ����Τߤ�Ԥ��� Ÿ�������ȡ����Ԥ��ޤ��� ������� - <literal/APT::Get::Download-Only/ </Para></ListItem> </VarListEntry> <VarListEntry><term><option/-f/</><term><option/--fix-broken/</> <ListItem><Para> <!-- Fix; attempt to correct a system with broken dependencies in place. This option, when used with install/remove, can omit any packages to permit APT to deduce a likely soltion. Any Package that are specified must completly correct the problem. The option is sometimes necessary when running APT for the first time; APT itself does not allow broken package dependencies to exist on a system. It is possible that a system's dependency structure can be so corrupt as to require manual intervention (which usually means using &dselect; or <command/dpkg - -remove/ to eliminate some of the offending packages). Use of this option together with <option/-m/ may produce an error in some situations. Configuration Item: <literal/APT::Get::Fix-Broken/. --> ���� - ��¸�ط������줿�����ƥ�ν������ߤޤ��� ���Υ��ץ����� install �� remove �Ȱ��˻Ȥ��Ȥ��ϡ��ѥå������� ���ꤷ�ʤ��Ƥ⤫�ޤ��ޤ��ɤΥѥå���������ꤷ�Ƥ⡢����������� ��褷�ޤ� APT ���Τϥ����ƥ��¸�ߤ�����줿�ѥå�������¸�ط���������Ȥ��Ǥ��ʤ� �Τǡ����� APT ��¹Ԥ����硢���Υ��ץ����ɬ�פˤʤ뤳�Ȥ�����ޤ��� �����ƥ�ΰ�¸�ط���¤�ˤ��ʤ����꤬������ϡ���ư�ǽ�������褦 �᤹�뤳�Ȥ��������ޤ��� (�̾�ϡ�����Τ���ѥå�������������Τ�&dselect; �� <command/dpkg --remove/ ����Ѥ��ޤ�) ���Υ��ץ����� <option/-m/ ���ץ�����Ʊ���˻��Ѥ���ȡ� ��������Ǥϥ��顼�ˤʤ뤫�⤷��ޤ��� ������� - <literal/APT::Get::Fix-Broken/ </Para></ListItem> </VarListEntry> <VarListEntry><term><option/-m/</><term><option/--ignore-missing/</> <term><option/--fix-missing/</> <ListItem><Para> <!-- Ignore missing packages; If packages cannot be retrieved or fail the integrity check after retrieval (corrupted package files), hold back those packages and handle the result. Use of this option together with <option/-f/ may produce an error in some situations. If a package is selected for installation (particularly if it is mentioned on the command line) and it could not be downloaded then it will be silently held back. Configuration Item: <literal/APT::Get::Fix-Missing/. --> ����ѥå�������̵�� - �ѥå������������Ǥ��ʤ��ä��ꡢ (�ѥå���������»��) ����������������������å����̤�ʤ��ä���硢 ���Υѥå������ν�������α���Ǹ�ޤǽ�����³���ޤ��� ���Υ��ץ����� <option/-f/ ���ץ�����Ʊ���˻��Ѥ���ȡ� ��������Ǥϥ��顼�ˤʤ뤫�⤷��ޤ��� �ѥå������ȡ��뤹��褦���Ƥ����� (�ä˥��ޥ�ɥ饤��Ǥ�����) �䡢����������ɤǤ��ʤ��ä����� �ʤˤ�ɽ��������α���뤳�Ȥˤʤ�ޤ��� ������� - <literal/APT::Get::Fix-Missing/ </Para></ListItem> </VarListEntry> <VarListEntry><term><option/--no-download/</> <ListItem><Para> <!-- Disables downloading of packages. This is best used with <option/- -ignore-missing/ to force APT to use only the .debs it has already downloaded. Configuration Item: <literal/APT::Get::Download/. --> �ѥå������Υ���������ɤ��ޤ�����Ϥ��Ǥ˥���������ɤ��� .deb ���Ф��ƤΤ�APT��Ԥ��ݤˡ�<option/--ignore-missing/ ��ʻ���� �Ȥ��Τ��褤�Ǥ��礦�� ������� - <literal/APT::Get::Download/ </Para></ListItem> </VarListEntry> <VarListEntry><term><option/-q/</><term><option/--quiet/</> <ListItem><Para> <!-- Quiet; produces output suitable for logging, omitting progress indicators. More q's will produce more quiet up to a maximum of 2. You can also use <option/-q=#/ to set the quiet level, overriding the configuration file. Note that quiet level 2 implies <option/-y/, you should never use -qq without a no-action modifier such as -d, - -print-uris or -s as APT may decided to do something you did not expect. Configuration Item: <literal/quiet/. --> �Ų� - ��Ľɽ�����ά���ƥ�����Ȥ�Τ������ʽ��Ϥ�Ԥ��ޤ��� ���� 2 �Ĥޤ� q ��Ťͤ뤳�ȤǤ���Ť��ˤǤ��ޤ��� �ޤ���<option/-q=#/ �Τ褦���Ų���٥����ꤷ�ơ�����ե������ ����뤳�Ȥ�Ǥ��ޤ��� ��) �Ų���٥� 2 �� <option/-y/ �ΰ�̣��ޤ�Ǥ��ޤ��� APT ���տޤ��ʤ������Ԥ����⤷��ʤ��Τ� -d, --print-uris, -s �Τ褦�� ����Ԥ�ʤ����ץ�����Ĥ����� -qq ����Ѥ���٤��ǤϤ���ޤ��� ������� - <literal/quiet/ </Para></ListItem> </VarListEntry> <VarListEntry><term><option/-s/</> <term><option/--simulate/</> <term><option/--just-print/</> <term><option/--dry-run/</> <term><option/--recon/</> <term><option/--no-act/</> <ListItem><Para> <!-- No action; perform a simulation of events that would occur but do not actually change the system. Configuration Item: <literal/APT::Get::Simulate/. --> ư��ʤ� - �ʤˤ�������Τ��Υ��ߥ�졼������Ԥ��� �ºݤΥ����ƥ��ѹ��Ϥ��ޤ��� ������� - <literal/APT::Get::Simulate/ </para> <para> <!-- Simulate prints out a series of lines each one representing a dpkg operation, Configure (Conf), Remove (Remv), Unpack (Inst). Square brackets indicate broken packages with and empty set of square brackets meaning breaks that are of no consequence (rare). --> ���ߥ�졼�Ȥη�̡�dpkg ��ư���ɽ����Ϣ�ιԤΤ��줾��ˡ����� (Conf)�� ��� (Remv)�� Ÿ�� (Inst) ��ɽ�����ޤ��� �ѥ��å��ϲ��줿�ѥå�������ɽ�������γѥ��å����礷������ǤϤʤ����Ȥ� ɽ���ޤ�(�ޤ�Ǥ�)�� </Para></ListItem> </VarListEntry> <VarListEntry><term><option/-y/</><term><option/--yes/</> <term><option/--assume-yes/</> <ListItem><Para> <!-- Automatic yes to prompts; assume "yes" as answer to all prompts and run non-interactively. If an undesirable situation, such as changing a held package or removing an essential package occurs then <literal/apt-get/ will abort. Configuration Item: <literal/APT::Get::Assume-Yes/. --> �ץ���ץȤؤμ�ư���� - ���٤ƤΥץ���ץȤ˼�ưŪ�� "yes" �������� ������Ū�˼¹Ԥ��ޤ��� ��α�����ѥå������ξ��֤��ѹ������ꡢɬ�ܥѥå�������������褦����Ŭ�ڤʾ����ξ�硢 <literal/apt-get/ �����Ǥ���Ǥ��礦�� ������� - <literal/APT::Get::Assume-Yes/ </Para></ListItem> </VarListEntry> <VarListEntry><term><option/-u/</><term><option/--show-upgraded/</> <ListItem><Para> <!-- Show upgraded packages; Print out a list of all packages that are to be upgraded. Configuration Item: <literal/APT::Get::Show-Upgraded/. --> �����ѥå�����ɽ�� - ������������ѥå������ΰ�����ɽ�����ޤ��� ������� - <literal/APT::Get::Show-Upgraded/ </Para></ListItem> </VarListEntry> <VarListEntry><term><option/-b/</><term><option/--compile/</> <term><option/--build/</> <ListItem><Para> <!-- Compile source packages after downloading them. Configuration Item: <literal/APT::Get::Compile/. --> �������ѥå����������������ɸ塢����ѥ��뤷�ޤ��� ������� - <literal/APT::Get::Compile/ </Para></ListItem> </VarListEntry> <VarListEntry><term><option/--ignore-hold/</> <ListItem><Para> <!-- Ignore package Holds; This causes <command/apt-get/ to ignore a hold placed on a package. This may be useful in conjunction with <literal/dist-upgrade/ to override a large number of undesired holds. Configuration Item: <literal/APT::Ignore-Hold/. --> ��α�ѥå�����̵�� - �ѥå���������α�ؼ���̵�뤷�� <command/apt-get/ ��Ԥ��ޤ��� ���̤Υѥå���������α�β����Τ� <literal/dist-upgrade/ �ȶ��� ���Ѥ���������Ǥ��� ������� - <literal/APT::Ignore-Hold/ </Para></ListItem> </VarListEntry> <VarListEntry><term><option/--no-upgrade/</> <ListItem><Para> <!-- Do not upgrade packages; When used in conjunction with <literal/install/ <literal/no-upgrade/ will prevent packages listed from being upgraded if they are already installed. Configuration Item: <literal/APT::Get::Upgrade/. --> �ѥå����������ʤ� - <literal/install/ ��Ʊ���˻��Ѥ���ȡ� <literal/no-upgrade/ �ϻ��ꤷ���ѥå����������Ǥ˥��ȡ��뤷�Ƥ����� ������Ԥ��ޤ��� ������� - <literal/APT::Get::Upgrade/ </Para></ListItem> </VarListEntry> <VarListEntry><term><option/--force-yes/</> <ListItem><Para> <!-- Force yes; This is a dangerous option that will cause apt to continue without prompting if it is doing something potentially harmful. It should not be used except in very special situations. Using <literal/force-yes/ can potentially destroy your system! Configuration Item: <literal/APT::Get::force-yes/. --> �������� - APT ������»����Ϳ�����ͤʤ�ư��褦�Ȥ������Ǥ⡢ ��ǧ�����Ϥʤ��Ǽ¹Ԥ��Ƥ��ޤ��������ʥ��ץ����Ǥ��� ��ۤɤξ����Ǥʤ���С����Ѥ��ʤ����������Ǥ��礦�� <literal/force-yes/ �Ϥ��ʤ��Υ����ƥ���˲������ͤޤ���! ������� - <literal/APT::Get::force-yes/ </Para></ListItem> </VarListEntry> <VarListEntry><term><option/--print-uris/</> <ListItem><Para> <!-- Instead of fetching the files to install their URIs are printed. Each URI will have the path, the destination file name, the size and the expected md5 hash. Note that the file name to write to will not always match the file name on the remote site! This also works with the <literal/source/ and <literal/update/ commands. When used with the <literal/update/ command the MD5 and size are not included, and it is up to the user to decompress any compressed files. Configuration Item: <literal/APT::Get::Print-URIs/. --> ���ȡ��뤹��ե�����������������ˡ�����URI��ɽ�����ޤ��� URI�ˤϡ��ѥ����оݥե�����̾���ե����륵������ͽ¬����� md5 �ϥå��� ���ޤޤ�Ƥ��ޤ��� ��) ���Ϥ����ե�����̾������˥�⡼�ȥ����ȤΥե�����̾�Ȱ��פ���櫓 �ǤϤ���ޤ���! ����� <literal/source/ ���ޥ�ɡ� <literal/update/ ���ޥ�ɤǤ�ư��ޤ��� MD5 ��ե����륵������ޤޤ� <literal/update/ �ǻ��Ѥ����Ȥ��ˡ� ���̥ե������Ÿ�����뤳�Ȥϥ桼������Ǥ�ˤ����ƹԤäƤ��������� ������� - <literal/APT::Get::Print-URIs/ </Para></ListItem> </VarListEntry> <VarListEntry><term><option/--purge/</> <ListItem><Para> <!-- Use purge instead of remove for anything that would be removed. Configuration Item: <literal/APT::Get::Purge/. --> ��������硢����ǤϤʤ������������Ѥ��ޤ��� ������� - <literal/APT::Get::Purge/ </Para></ListItem> </VarListEntry> <VarListEntry><term><option/--reinstall/</> <ListItem><Para> <!-- Re-Install packages that are already installed and at the newest version. Configuration Item: <literal/APT::Get::ReInstall/. --> ���Ǥ˺ǿ��Ǥ����ȡ��뤵��Ƥ��Ƥ⡢�ѥå�������ƥ��ȡ��뤷�ޤ��� ������� - <literal/APT::Get::ReInstall/ </Para></ListItem> </VarListEntry> <VarListEntry><term><option/--list-cleanup/</> <ListItem><Para> <!-- This option defaults to on, use <literal/- -no-list-cleanup/ to turn it off. When on <command/apt-get/ will automatically manage the contents of <filename>&statedir;/lists</> to ensure that obsolete files are erased. The only reason to turn it off is if you frequently change your source list. Configuration Item: <literal/APT::Get::List-Cleanup/. --> ���ε�ǽ�ϥǥե���Ȥ� ON �ˤʤäƤ��ޤ��� OFF �ˤ���ˤ� <literal/--no-list-cleanup/ �Ȥ��Ƥ��������� ON �ξ�硢<command/apt-get/ �ϸŤ��ʤä��ե������μ¤˾õ�뤿�ᡢ ��ưŪ�� <filename>&statedir;/lists</> ����Ȥ��������Ǥ��礦�� ����� OFF �ˤ���Τϡ����ʤ����������ꥹ�Ȥ����ˤ��ѹ���������餤�Ǥ��� ������� - <literal/APT::Get::List-Cleanup/ </Para></ListItem> </VarListEntry> <VarListEntry><term><option/-t/</> <term><option/--target-release/</> <term><option/--default-release/</> <ListItem><Para> <!-- This option controls the default input to the policy engine, it creates a default pin at priority 990 using the specified release string. The preferences file may further override this setting. In short, this option lets you have simple control over which distribution packages will be retrieved from. Some common examples might be <option>-t '2.1*'</> or <option>-t unstable</>. Configuration Item: <literal/APT::Default-Release/ --> ���Υ��ץ����ϥݥꥷ������ؤΥǥե�������Ϥ����椷�ޤ��� ����ϡ����ꤵ�줿����ʸ�������Ѥ����ǥե���� pin ��ͥ���� 990 �Ǻ������뤳�ȤǤ��� ͥ��ե�����Ϥ�����������ޤ��� �פ���ˤ��Υ��ץ����ϡ��ɤ����ۥѥå�������������뤫���ñ�� �������Ƥ��ޤ��� �����Ĥ�����Ū����ϡ�<option>-t '2.1*'</> �� <option>-t unstable</> �Ǥ��礦�� ������� - <literal/APT::Default-Release/ </Para></ListItem> </VarListEntry> <VarListEntry><term><option/--trivial-only/</> <ListItem><Para> <!-- Only perform operations that are 'trivial'. Logically this can be considered related to <option/- -assume-yes/, where <option/- -assume-yes/ will answer yes to any prompt, <option/- -trivial-only/ will answer no. Configuration Item: <literal/APT::Get::Trivial-Only/. --> �ֽ��פǤʤ������Τߤ�Ԥ��ޤ������������Ū�� <option/--assume-yes/ �� ��֤ȸ��ʤ����Ȥ��Ǥ��ޤ���<option/--assume-yes/ �ϼ���ˤ��٤� yes �� �����ޤ�����<option/--trivial-only/ �Ϥ��٤� no �������ޤ��� ������� - <literal/APT::Get::Trivial-Only/ </Para></ListItem> </VarListEntry> <VarListEntry><term><option/--no-remove/</> <ListItem><Para> <!-- If any packages are to be removed apt-get immediately aborts without prompting. Configuration Item: <literal/APT::Get::Remove/ --> �ѥå�������������������ˤʤä��Ȥ����ץ���ץȤ�ɽ���������Ǥ��ޤ��� ������� - <literal/APT::Get::Remove/ </Para></ListItem> </VarListEntry> <VarListEntry><term><option/--only-source/</> <ListItem><Para> <!-- Only has meaning for the <literal/source/ command. indicates that the given source names are not to be mapped through the binary table. Configuration Item: <literal/APT::Get::Only-Source/ --> <literal/source/ ���ޥ�ɤǤΤ߰�̣������ޤ��� ���ꤵ�줿������̾���Х��ʥ�ơ��֥�˥ޥåפ���ʤ����Ȥ��ޤ��� ������� - <literal/APT::Get::Only-Source/ </Para></ListItem> </VarListEntry> <VarListEntry><term><option/--diff-only/</><term><option/--tar-only/</> <ListItem><Para> <!-- Download only the diff or tar file of a source archive. Configuration Item: <literal/APT::Get::Diff-Only/ and <literal/APT::Get::Tar-Only/ --> ���������������֤� diff �ե������ tar �ե�����Υ���������ɤΤߤ�Ԥ��ޤ��� ������� - <literal/APT::Get::Diff-Only/ �� <literal/APT::Get::Tar-Only/ </Para></ListItem> </VarListEntry> <VarListEntry><term><option/--arch-only/</> <ListItem><Para> <!-- Only process architecture-dependent build-dependencies. Configuration Item: <literal/APT::Get::Arch-Only/ --> ���۰�¸�ط��β������ƥ�����˰�¸������ΤΤ߹Ԥ��ޤ��� ������� - <literal/APT::Get::Arch-Only/ </Para></ListItem> </VarListEntry> &apt-commonoptions; </VariableList> </RefSect1> <RefSect1><Title>�ե�����</> <variablelist> <VarListEntry><term><filename>/etc/apt/sources.list</></term> <ListItem><Para> <!-- locations to fetch packages from. Configuration Item: <literal/Dir::Etc::SourceList/. --> �ѥå������μ������� ������� - <literal/Dir::Etc::SourceList/ </Para></ListItem> </VarListEntry> <VarListEntry><term><filename>/etc/apt/apt.conf</></term> <ListItem><Para> <!-- APT configuration file. Configuration Item: <literal/Dir::Etc::Main/. --> APT ����ե����롣 ������� - <literal/Dir::Etc::Main/ </Para></ListItem> </VarListEntry> <VarListEntry><term><filename>/etc/apt/apt.conf.d/</></term> <ListItem><Para> <!-- APT configuration file fragments Configuration Item: <literal/Dir::Etc::Parts/. --> APT ����ե���������ҡ� ������� - <literal/Dir::Etc::Parts/ </Para></ListItem> </VarListEntry> <VarListEntry><term><filename>/etc/apt/preferences</></term> <ListItem><Para> <!-- version preferences file Configuration Item: <literal/Dir::Etc::Preferences/. --> �С������ͥ��ե����롣 ������� - <literal/Dir::Etc::Preferences/ </Para></ListItem> </VarListEntry> <VarListEntry><term><filename>&cachedir;/archives/</></term> <ListItem><Para> <!-- storage area for retrieved package files. Configuration Item: <literal/Dir::Cache::Archives/. --> �����Ѥߥѥå������ե������Ǽ���ꥢ�� ������� - <literal/Dir::Cache::Archives/ </Para></ListItem> </VarListEntry> <VarListEntry><term><filename>&cachedir;/archives/partial/</></term> <ListItem><Para> <!-- storage area for package files in transit. Configuration Item: <literal/Dir::Cache::Archives/ (implicit partial). --> ������ѥå������ե������Ǽ���ꥢ�� ������� - <literal/Dir::Cache::Archives/ (ɬ��Ū���Դ����Ǥ�) </Para></ListItem> </VarListEntry> <VarListEntry><term><filename>&statedir;/lists/</></term> <ListItem><Para> <!-- storage area for state information for each package resource specified in &sources-list; Configuration Item: <literal/Dir::State::Lists/. --> &sources-list; �Υѥå���������ͭ�ξ��־����Ǽ���ꥢ�� ������� - <literal/Dir::State::Lists/ </Para></ListItem> </VarListEntry> <VarListEntry><term><filename>&statedir;/lists/partial/</></term> <ListItem><Para> <!-- storage area for state information in transit. Configuration Item: <literal/Dir::State::Lists/ (implicit partial). --> ������ξ��־����Ǽ���ꥢ�� ������� - <literal/Dir::State::Lists/ (ɬ��Ū���Դ����Ǥ�) </Para></ListItem> </VarListEntry> </variablelist> </RefSect1> <RefSect1><Title>��Ϣ����</> <para> &apt-cache;, &apt-cdrom;, &dpkg;, &dselect;, &sources-list;, &apt-conf;, &docdir;�� APT �桼������������, &apt-preferences; </para> </RefSect1> <RefSect1><Title>���ǥ�å�����</> <para> <command/apt-get/ �����ェλ���� 0 ���֤��ޤ��� ���顼���ˤϽ��ʤ� 100 ���֤��ޤ��� </para> </RefSect1> &manbugs; &manauthor; &translator; </refentry>