<!-- -*- mode: sgml; mode: fold -*- -->
<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V3.1//EN" [

<!ENTITY % aptent SYSTEM "apt.ent">
%aptent;

]>

<refentry>
 &apt-docinfo;
 
 <refmeta>
   <refentrytitle>sources.list</>
   <manvolnum>5</>
 </refmeta>
 
 <!-- Man page title -->
 <refnamediv>
    <refname>sources.list</>
    <refpurpose>Package resource list for APT</>
 </refnamediv>
 
 <RefSect1><Title>Description</>
   <para>   
   The package resource list is used to locate archives of the package
   distribution system in use on the system. At this time, this manual page
   documents only the packaging system used by the Debian GNU/Linux system.
   This control file is located in <filename>/etc/apt/sources.list</>
   <para>
   The source list is designed to support any number of active sources and a
   variety of source media. The file lists one source per line, with the
   most preferred source listed first. The format of each line is:
   <literal/type uri args/. The first item, <literal/type/, determines the 
   format for <literal/args/. <literal/uri/ is a Universal Resource Identifier 
   (URI), which is a superset of the more specific and well-known Universal
   Resource Locator, or URL. The rest of the line can be marked as a comment 
   by using a #.
 </RefSect1>
 
 <RefSect1><Title>The deb and deb-src types</>
   <para>   
   The <literal/deb/ type describes a typical two-level Debian archive,
   <filename>distribution/component</>. Typically, <literal/distribution/ is 
   generally one of <literal/stable/, <literal/unstable/, or 
   <literal/testing/, while component is one of <literal/main/, 
   <literal/contrib/, <literal/non-free/, or <literal/non-us/. The 
   <literal/deb-src/ type describes a debian distribution's source code in 
   the same form as the <literal/deb/ type. A <literal/deb-src/ line is 
   required to fetch source indexes.
   <para>
   The format for a <filename/sources.list/ entry using the <literal/deb/ 
   and <literal/deb-src/ types are:
   <literallayout>deb uri distribution [component1] [componenent2] [...]</literallayout>
   <para>
   The URI for the <literal/deb/ type must specify the base of the Debian 
   distribution, from which APT will find the information it needs. 
   <literal/distribution/ can specify an exact path, in which case the 
   components must be omitted and <literal/distribution/ must end with a 
   slash (/). This is useful for when only a particular sub-section of the 
   archive denoted by the URI is of interest. If <literal/distribution/ does 
   not specify an exact path, at least one <literal/component/ must be present.
   <para>
   <literal/distribution/ may also contain a variable, <literal/$(ARCH)/,
   which expands to the Debian architecture (i386, m68k, powerpc, ...)
   used on the system. This permits architecture-independent
   <filename/sources.list/ files to be used. In general this is only of 
   interest when specifying an exact path, <literal/APT/ will automatically 
   generate a URI with the current architecture otherwise.
   <para>
   Since only one distribution can be specified per line it may be necessary
   to have multiple lines for the same URI, if a subset of all available
   distributions or components at that location is desired.
   APT will sort the URI list after it has generated a complete set 
   internally, and will collapse multiple references to the same Internet 
   host, for instance, into a single connection, so that it does not 
   inefficiently establish an FTP connection, close it, do something else, 
   and then re-establish a connection to that same host. This feature is 
   useful for accessing busy FTP sites with limits on the number of 
   simultaneous anonymous users. APT also parallizes connections to 
   different hosts to more effectively deal with sites with low bandwidth.
   <para>
   It is important to list sources in order of preference, with the most
   preferred source listed first. Typically this will result in sorting
   by speed from fastest to slowest (CD-ROM followed by hosts on a local
   network, followed by distant Internet hosts, for example).
   <para>
   Some examples:
   <literallayout>
deb http://http.us.debian.org/debian stable main contrib non-free
deb http://http.us.debian.org/debian dists/stable-updates/
   </literallayout>
 </RefSect1>

 <RefSect1><title>URI specification</title>
   <para>
   The currently recognized URI types are cdrom, file, http, and ftp.
   <VariableList>
    <VarListEntry><term>file</term>
    <ListItem><Para>
    The file scheme allows an arbitrary directory in the file system to be
    considered an archive. This is useful for NFS mounts and local mirrors or
    archives.
    </VarListEntry>
    
    <VarListEntry><term>cdrom</term>
    <ListItem><Para>
    The cdrom scheme allows APT to use a local CDROM drive with media
    swapping. Use the &apt-cdrom; program to create cdrom entries in the
    source list.
    </VarListEntry>

    <VarListEntry><term>http</term>
    <ListItem><Para>
    The http scheme specifies an HTTP server for the archive. If an environment
    variable <EnVar/http_proxy/ is set with the format 
    http://server:port/, the proxy server specified in
    <EnVar/http_proxy/ will be used. Users of authenticated HTTP/1.1 proxies 
    may use a string of the format http://user:pass@server:port/
    Note that this is an insecure method of authentication.
    </VarListEntry>

    <VarListEntry><term>ftp</term>
    <ListItem><Para>
    The ftp scheme specifies an FTP server for the archive. APT's FTP behavior
    is highly configurable; for more information see the
    &apt-conf; manual page. Please note that a ftp proxy can be specified
    by using the <EnVar/ftp_proxy/ environment variable. It is possible to 
    specify a http proxy (http proxy servers often understand ftp urls) using 
    this method and ONLY this method. ftp proxies using http specified in the 
    configuration file will be ignored.
    </VarListEntry>

    <VarListEntry><term>copy</term>
    <ListItem><Para>
    The copy scheme is identical to the file scheme except that packages are
    copied into the cache directory instead of used directly at their location.
    This is useful for people using a zip disk to copy files around with APT.
    </VarListEntry>
    
    <VarListEntry><term>rsh</term><term>ssh</term>
    <ListItem><Para>
    The rsh/ssh method invokes rsh/ssh to connect to a remote host
    as a given user and access the files. No password authentication is 
    possible, prior arrangements with RSA keys or rhosts must have been made.
    Access to files on the remote uses standard <command/find/ and <command/dd/ 
    commands to perform the file transfers from the remote.
    </VarListEntry>
  </VariableList>
 </RefSect1>
 
 <RefSect1><title>Examples</title>
   <para>
   Uses the archive stored locally (or NFS mounted) at /home/jason/debian
   for stable/main, stable/contrib, and stable/non-free.
   <literallayout>deb file:/home/jason/debian stable main contrib non-free</literallayout>
   <para>
   As above, except this uses the unstable (development) distribution.
   <literallayout>deb file:/home/jason/debian unstable main contrib non-free</literallayout>
   <para>
   Source line for the above
   <literallayout>deb-src file:/home/jason/debian unstable main contrib non-free</literallayout>
   <para>
   Uses HTTP to access the archive at archive.debian.org, and uses only the
   hamm/main area.
   <literallayout>deb http://archive.debian.org/debian-archive hamm main</literallayout>
   <para>
   Uses FTP to access the archive at ftp.debian.org, under the debian
   directory, and uses only the stable/contrib area.
   <literallayout>deb ftp://ftp.debian.org/debian stable contrib</literallayout>
   <para>
   Uses FTP to access the archive at ftp.debian.org, under the debian
   directory, and uses only the unstable/contrib area. If this line appears as
   well as the one in the previous example in <filename/sources.list/,
   a single FTP session will be used for both resource lines.
   <literallayout>deb ftp://ftp.debian.org/debian unstable contrib</literallayout>
   <para>
   Uses HTTP to access the archive at nonus.debian.org, under the debian-non-US
   directory.
   <literallayout>deb http://nonus.debian.org/debian-non-US stable/non-US main contrib non-free</literallayout>
   <para>
   Uses HTTP to access the archive at nonus.debian.org, under the
   debian-non-US directory, and uses only files found under
   <filename>unstable/binary-i386</> on i386 machines, 
   <filename>unstable/binary-m68k</> on m68k, and so
   forth for other supported architectures. [Note this example only 
   illustrates how to use the substitution variable; non-us is no longer 
   structured like this] 
   <literallayout>deb http://ftp.de.debian.org/debian-non-US unstable/binary-$(ARCH)/</literallayout>
 </RefSect1>
 
 <RefSect1><Title>See Also</>
   <para>
   &apt-cache; &apt-conf;
 </RefSect1>

 &manbugs;
 &manauthor;
 
</refentry>