# 先進包裝工具 (apt) 繁體中文訊息
# Translators: 黃思文 <steven.huang@upcursor.org>
#              Asho Yeh <asho@debian.org.tw>
#              Kanru Chen <kanru.96@stu.csie.ncnu.edu.tw>
#              Tetralet <tetralet@gmail.com>
#              Zhou Mo <cdluminate@gmail.com> 2016 # Simplified Chinese Translator, only make trivial fixes.
#
msgid ""
msgstr ""
"Project-Id-Version: apt 1.2.X\n"
"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
"POT-Creation-Date: 2018-09-18 16:15+0200\n"
"PO-Revision-Date: 2009-01-28 10:41+0800\n"
"Last-Translator: Tetralet <tetralet@gmail.com>\n"
"Language-Team: Debian-user in Chinese [Big5] <debian-chinese-big5@lists."
"debian.org>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#: apt-inst/contrib/arfile.cc
msgid "Invalid archive signature"
msgstr "無效的套件庫簽章"

#: apt-inst/contrib/arfile.cc
msgid "Error reading archive member header"
msgstr "讀取套件檔的成員標頭訊息時發生錯誤"

#: apt-inst/contrib/arfile.cc
#, fuzzy, c-format
msgid "Invalid archive member header %s"
msgstr "無效的套件檔成員標頭"

#: apt-inst/contrib/arfile.cc
msgid "Invalid archive member header"
msgstr "無效的套件檔成員標頭"

#: apt-inst/contrib/arfile.cc
msgid "Archive is too short"
msgstr "套件檔過短"

#: apt-inst/contrib/arfile.cc
msgid "Failed to read the archive headers"
msgstr "讀取套件檔標頭失敗"

#: apt-inst/contrib/extracttar.cc
#, fuzzy, c-format
msgid "Cannot find a configured compressor for '%s'"
msgstr "無法找到套件 %s"

#: apt-inst/contrib/extracttar.cc
msgid "Corrupted archive"
msgstr "損毀的套件檔"

#: apt-inst/contrib/extracttar.cc
msgid "Tar checksum failed, archive corrupted"
msgstr "Tar checksum 失敗,套件檔已損毀"

#: apt-inst/contrib/extracttar.cc
#, c-format
msgid "Unknown TAR header type %u, member %s"
msgstr "未知的 TAR 標頭類型 %u,成員 %s"

#: apt-inst/deb/debfile.cc
#, c-format
msgid "This is not a valid DEB archive, missing '%s' member"
msgstr "這是個不正確的 DEB 套件檔,沒有 '%s' 成員"

#: apt-inst/deb/debfile.cc
#, c-format
msgid "Internal error, could not locate member %s"
msgstr "內部錯誤,找不找到成員 %s"

#: apt-inst/deb/debfile.cc
msgid "Unparsable control file"
msgstr "無法分析的 control 檔"

#: apt-inst/dirstream.cc
#, c-format
msgid "Failed to write file %s"
msgstr "寫入檔案 %s 失敗"

#: apt-inst/dirstream.cc
#, c-format
msgid "Failed to close file %s"
msgstr "關閉檔案 %s 失敗"

#: apt-inst/extract.cc
#, c-format
msgid "The path %s is too long"
msgstr "路徑 %s 過長"

#: apt-inst/extract.cc
#, c-format
msgid "Unpacking %s more than once"
msgstr "解開 %s 超過一次"

#: apt-inst/extract.cc
#, c-format
msgid "The directory %s is diverted"
msgstr "路徑 %s 已被抽換"

#: apt-inst/extract.cc
#, c-format
msgid "The package is trying to write to the diversion target %s/%s"
msgstr "此套件試圖寫至抽換後的目標 %s/%s"

#: apt-inst/extract.cc
msgid "The diversion path is too long"
msgstr "要進行抽換的路徑過長"

#: apt-inst/extract.cc apt-pkg/acquire-item.cc ftparchive/cachedb.cc
#: methods/rred.cc
#, c-format
msgid "Failed to stat %s"
msgstr "無法取得 %s 的狀態"

#: apt-inst/extract.cc ftparchive/multicompress.cc
#, c-format
msgid "Failed to rename %s to %s"
msgstr "無法將 %s 更名為 %s"

#: apt-inst/extract.cc
#, c-format
msgid "The directory %s is being replaced by a non-directory"
msgstr "目錄 %s 已經被非目錄的檔案所取代"

#: apt-inst/extract.cc
msgid "Failed to locate node in its hash bucket"
msgstr "在雜湊表中找不到節點"

#: apt-inst/extract.cc
msgid "The path is too long"
msgstr "路徑過長"

#: apt-inst/extract.cc
#, c-format
msgid "Overwrite package match with no version for %s"
msgstr "以無版本的 %s 覆寫原始套件"

#: apt-inst/extract.cc
#, c-format
msgid "File %s/%s overwrites the one in the package %s"
msgstr "檔案 %s/%s 覆寫了套件 %s 中的相同檔案"

#. Only warn if there are no sources.list.d.
#. Only warn if there is no sources.list file.
#: apt-inst/extract.cc apt-pkg/acquire.cc apt-pkg/clean.cc
#: apt-pkg/contrib/cdromutl.cc apt-pkg/contrib/fileutl.cc apt-pkg/deb/dpkgpm.cc
#: apt-pkg/init.cc apt-pkg/policy.cc apt-pkg/sourcelist.cc
#, c-format
msgid "Unable to read %s"
msgstr "無法讀取 %s"

#: apt-inst/extract.cc
#, c-format
msgid "Unable to stat %s"
msgstr "無法取得 %s 的狀態"

#: apt-inst/filelist.cc
msgid "DropNode called on still linked node"
msgstr "DropNode 在還有連結結點時被呼叫"

#: apt-inst/filelist.cc
msgid "Failed to locate the hash element!"
msgstr "找不到雜湊元件!"

#: apt-inst/filelist.cc
msgid "Failed to allocate diversion"
msgstr "在配置抽換資訊時失敗"

#: apt-inst/filelist.cc
msgid "Internal error in AddDiversion"
msgstr "在 AddDiversion 發生了內部錯誤"

#: apt-inst/filelist.cc
#, c-format
msgid "Trying to overwrite a diversion, %s -> %s and %s/%s"
msgstr "試圖改寫抽換資訊,%s -> %s 和 %s/%s"

#: apt-inst/filelist.cc
#, c-format
msgid "Double add of diversion %s -> %s"
msgstr "重複加入抽換資訊 %s -> %s"

#: apt-inst/filelist.cc
#, c-format
msgid "Duplicate conf file %s/%s"
msgstr "重複的設定檔 %s/%s"

#: apt-pkg/acquire-item.cc
msgid ""
"Updating from such a repository can't be done securely, and is therefore "
"disabled by default."
msgstr ""

#: apt-pkg/acquire-item.cc
msgid ""
"Data from such a repository can't be authenticated and is therefore "
"potentially dangerous to use."
msgstr ""

#: apt-pkg/acquire-item.cc
msgid ""
"See apt-secure(8) manpage for repository creation and user configuration "
"details."
msgstr ""

#: apt-pkg/acquire-item.cc
#, fuzzy, c-format
msgid "The repository '%s' is no longer signed."
msgstr "路徑 %s 已被抽換"

#: apt-pkg/acquire-item.cc
#, fuzzy, c-format
msgid "The repository '%s' no longer has a Release file."
msgstr "路徑 %s 已被抽換"

#: apt-pkg/acquire-item.cc
msgid ""
"This is normally not allowed, but the option Acquire::"
"AllowDowngradeToInsecureRepositories was given to override it."
msgstr ""

#: apt-pkg/acquire-item.cc
#, fuzzy, c-format
msgid "The repository '%s' is not signed."
msgstr "路徑 %s 已被抽換"

#: apt-pkg/acquire-item.cc
#, fuzzy, c-format
msgid "The repository '%s' does not have a Release file."
msgstr "路徑 %s 已被抽換"

#: apt-pkg/acquire-item.cc
#, fuzzy, c-format
msgid "The repository '%s' provides only weak security information."
msgstr "路徑 %s 已被抽換"

#: apt-pkg/acquire-item.cc ftparchive/writer.cc
#, c-format
msgid "Failed to readlink %s"
msgstr "無法讀取連結 %s"

#: apt-pkg/acquire-item.cc
msgid "Hash Sum mismatch"
msgstr "Hash Sum 不符"

#: apt-pkg/acquire-item.cc
msgid "Insufficient information available to perform this download securely"
msgstr ""

#: apt-pkg/acquire-item.cc apt-pkg/contrib/fileutl.cc
#, c-format
msgid "rename failed, %s (%s -> %s)."
msgstr "無法重新命名,%s (%s -> %s)。"

#: apt-pkg/acquire-item.cc
msgid "Size mismatch"
msgstr "大小不符"

#: apt-pkg/acquire-item.cc
#, fuzzy
msgid "Invalid file format"
msgstr "無效的操作 %s"

#: apt-pkg/acquire-item.cc
#, fuzzy
msgid "Signature error"
msgstr "寫入錯誤"

#. TRANSLATORS: %s is a single techy word like 'NODATA'
#: apt-pkg/acquire-item.cc methods/gpgv.cc
#, c-format
msgid ""
"Clearsigned file isn't valid, got '%s' (does the network require "
"authentication?)"
msgstr ""

#: apt-pkg/acquire-item.cc
#, c-format
msgid ""
"An error occurred during the signature verification. The repository is not "
"updated and the previous index files will be used. GPG error: %s: %s"
msgstr ""

#. Invalid signature file, reject (LP: #346386) (Closes: #627642)
#: apt-pkg/acquire-item.cc
#, c-format
msgid "GPG error: %s: %s"
msgstr ""

#: apt-pkg/acquire-item.cc
#, c-format
msgid ""
"Skipping acquire of configured file '%s' as repository '%s' doesn't have the "
"component '%s' (component misspelt in sources.list?)"
msgstr ""

#: apt-pkg/acquire-item.cc
#, c-format
msgid ""
"Skipping acquire of configured file '%s' as repository '%s' doesn't support "
"architecture '%s'"
msgstr ""

#: apt-pkg/acquire-item.cc
#, c-format
msgid ""
"Skipping acquire of configured file '%s' as repository '%s' does not seem to "
"provide it (sources.list entry misspelt?)"
msgstr ""

#: apt-pkg/acquire-item.cc
#, c-format
msgid ""
"Skipping acquire of configured file '%s' as repository '%s' provides only "
"weak security information for it"
msgstr ""

#. TRANSLATOR: The first %s is the URL of the bad Release file, the second is
#. the time since then the file is invalid - formatted in the same way as in
#. the download progress display (e.g. 7d 3h 42min 1s)
#: apt-pkg/acquire-item.cc
#, c-format
msgid ""
"Release file for %s is expired (invalid since %s). Updates for this "
"repository will not be applied."
msgstr ""

#. TRANSLATOR: The first %s is the URL of the bad Release file, the second is
#. the time until the file will be valid - formatted in the same way as in
#. the download progress display (e.g. 7d 3h 42min 1s)
#: apt-pkg/acquire-item.cc
#, c-format
msgid ""
"Release file for %s is not valid yet (invalid for another %s). Updates for "
"this repository will not be applied."
msgstr ""

#: apt-pkg/acquire-item.cc
#, c-format
msgid "Conflicting distribution: %s (expected %s but got %s)"
msgstr "發行版本衝突:%s(應當是 %s 但卻得到 %s)"

#: apt-pkg/acquire-item.cc
#, c-format
msgid "Repository '%s' changed its '%s' value from '%s' to '%s'"
msgstr ""

#: apt-pkg/acquire-item.cc
#, c-format
msgid "Repository '%s' changed its default priority for %s from %hi to %hi."
msgstr ""

#. TRANSLATOR: the "this" refers to changes in the repository like a new release or owner change
#: apt-pkg/acquire-item.cc
#, c-format
msgid ""
"More information about this can be found online in the Release notes at: %s"
msgstr ""

#. TRANSLATOR: %s is the name of the manpage in question, e.g. apt-secure(8)
#: apt-pkg/acquire-item.cc
#, c-format
msgid ""
"This must be accepted explicitly before updates for this repository can be "
"applied. See %s manpage for details."
msgstr ""

#: apt-pkg/acquire-item.cc apt-pkg/update.cc apt-private/private-download.cc
#, c-format
msgid "Failed to fetch %s  %s"
msgstr "無法取得 %s,%s"

#: apt-pkg/acquire-item.cc
#, c-format
msgid ""
"I wasn't able to locate a file for the %s package. This might mean you need "
"to manually fix this package. (due to missing arch)"
msgstr ""
"找不到 %s 套件的某個檔案。這意味著您可能要手動修復這個套件。(因為找不到平"
"台)"

#: apt-pkg/acquire-item.cc
#, c-format
msgid "Can't find a source to download version '%s' of '%s'"
msgstr ""

#. TRANSLATOR: %s=%s is sourcename=sourceversion, e.g. apt=1.1
#: apt-pkg/acquire-item.cc
#, fuzzy, c-format
msgid "Changelog unavailable for %s=%s"
msgstr "正和 %s (%s) 連線"

#: apt-pkg/acquire-worker.cc
#, c-format
msgid "The method '%s' is explicitly disabled via configuration."
msgstr ""

#: apt-pkg/acquire-worker.cc methods/connect.cc
#, c-format
msgid "If you meant to use Tor remember to use %s instead of %s."
msgstr ""

#: apt-pkg/acquire-worker.cc
#, c-format
msgid "The method driver %s could not be found."
msgstr "找不到安裝方式的驅動程式 %s。"

#: apt-pkg/acquire-worker.cc
#, fuzzy, c-format
msgid "Is the package %s installed?"
msgstr "請檢查是否已安裝了 'dpkg-dev' 套件。\n"

#: apt-pkg/acquire-worker.cc
#, c-format
msgid "Method %s did not start correctly"
msgstr "安裝方式 %s 沒有正確啟動"

#: apt-pkg/acquire-worker.cc
#, fuzzy, c-format
msgid ""
"Please insert the disc labeled: '%s' in the drive '%s' and press [Enter]."
msgstr "請把標籤為 '%s' 的光碟放入 '%s' 裝置中,然後按下 [Enter] 鍵。"

#: apt-pkg/acquire.cc apt-pkg/cdrom.cc
#, fuzzy, c-format
msgid "List directory %s is missing."
msgstr "找不到清單目錄 %s。"

#: apt-pkg/acquire.cc
#, fuzzy, c-format
msgid "Archives directory %s is missing."
msgstr "找不到套件檔目錄 %s。"

#: apt-pkg/acquire.cc
#, fuzzy, c-format
msgid "Unable to lock directory %s"
msgstr "無法鎖定列表目錄"

#: apt-pkg/acquire.cc
#, c-format
msgid "No sandbox user '%s' on the system, can not drop privileges"
msgstr ""

#: apt-pkg/acquire.cc
#, c-format
msgid ""
"Download is performed unsandboxed as root as file '%s' couldn't be accessed "
"by user '%s'."
msgstr ""

#: apt-pkg/acquire.cc apt-pkg/clean.cc
#, fuzzy, c-format
msgid "Clean of %s is not supported"
msgstr "不被支援的索引檔類型 '%s'"

#: apt-pkg/acquire.cc
#, c-format
msgid "Retrieving file %li of %li (%s remaining)"
msgstr "正在取得檔案 %li/%li(還有 %s)"

#: apt-pkg/acquire.cc
#, c-format
msgid "Retrieving file %li of %li"
msgstr "正在取得檔案 %li/%li"

#: apt-pkg/algorithms.cc
#, c-format
msgid ""
"The package %s needs to be reinstalled, but I can't find an archive for it."
msgstr "套件 %s 需要重新安裝,但找不到它的套件檔。"

#: apt-pkg/algorithms.cc
msgid ""
"Error, pkgProblemResolver::Resolve generated breaks, this may be caused by "
"held packages."
msgstr ""
"錯誤,pkgProblemResolver::Resolve 的建立中斷了,這可能肇因於保留 (hold) 套"
"件。"

#: apt-pkg/algorithms.cc
msgid "Unable to correct problems, you have held broken packages."
msgstr "無法修正問題,您保留 (hold) 了損毀的套件。"

#: apt-pkg/cachefile.cc
msgid "The package lists or status file could not be parsed or opened."
msgstr "無法分析或開啟套件清單或狀況檔。"

#: apt-pkg/cachefile.cc
msgid "You may want to run apt-get update to correct these problems"
msgstr "您也許得執行 apt-get update 以修正這些問題"

#: apt-pkg/cachefile.cc methods/mirror.cc
msgid "The list of sources could not be read."
msgstr "無法讀取來源列表。"

#: apt-pkg/cachefilter.cc apt-private/private-output.cc
#, c-format
msgid "Regex compilation error - %s"
msgstr "編譯正規表示式時發生錯誤 - %s"

#: apt-pkg/cacheset.cc
#, c-format
msgid "Release '%s' for '%s' was not found"
msgstr "找不到 '%2$s' 的 '%1$s' 發行版"

#: apt-pkg/cacheset.cc
#, c-format
msgid "Version '%s' for '%s' was not found"
msgstr "找不到 '%s' 版的 '%s'"

#: apt-pkg/cacheset.cc
#, fuzzy, c-format
msgid "Couldn't find task '%s'"
msgstr "無法找到主題 %s"

#: apt-pkg/cacheset.cc
#, fuzzy, c-format
msgid "Couldn't find any package by regex '%s'"
msgstr "無法找到套件 %s"

#: apt-pkg/cacheset.cc
#, fuzzy, c-format
msgid "Couldn't find any package by glob '%s'"
msgstr "無法找到套件 %s"

#: apt-pkg/cacheset.cc apt-private/private-show.cc
#, c-format
msgid "Unable to locate package %s"
msgstr "找不到套件 %s"

#: apt-pkg/cacheset.cc
#, c-format
msgid "Can't select versions from package '%s' as it is purely virtual"
msgstr ""

#: apt-pkg/cacheset.cc
#, c-format
msgid "Can't select newest version from package '%s' as it is purely virtual"
msgstr ""

#: apt-pkg/cacheset.cc
#, c-format
msgid "Can't select candidate version from package %s as it has no candidate"
msgstr ""

#: apt-pkg/cacheset.cc
#, c-format
msgid "Can't select installed version from package %s as it is not installed"
msgstr ""

#: apt-pkg/cacheset.cc
#, c-format
msgid ""
"Can't select installed nor candidate version from package '%s' as it has "
"neither of them"
msgstr ""

#: apt-pkg/cdrom.cc
#, c-format
msgid "Line %u too long in source list %s."
msgstr "來源列表 %2$s 中的第 %1$u 行太長。"

#: apt-pkg/cdrom.cc
msgid "Unmounting CD-ROM...\n"
msgstr "正在卸載光碟機...\n"

#: apt-pkg/cdrom.cc
#, c-format
msgid "Using CD-ROM mount point %s\n"
msgstr "使用光碟機掛載點 %s\n"

#: apt-pkg/cdrom.cc
msgid "Waiting for disc...\n"
msgstr "正在等待碟片...\n"

#: apt-pkg/cdrom.cc
msgid "Mounting CD-ROM...\n"
msgstr "正在掛載光碟機... \n"

#: apt-pkg/cdrom.cc
msgid "Identifying... "
msgstr "正在識別..."

#: apt-pkg/cdrom.cc
#, c-format
msgid "Stored label: %s\n"
msgstr "保存標籤:%s\n"

#: apt-pkg/cdrom.cc
msgid "Scanning disc for index files...\n"
msgstr "正在掃描碟片中的索引檔...\n"

#: apt-pkg/cdrom.cc
#, c-format
msgid ""
"Found %zu package indexes, %zu source indexes, %zu translation indexes and "
"%zu signatures\n"
msgstr "找到了 %zu 個套件索引,%zu 個原始碼索引,%zu 個翻譯索引及 %zu 個簽章\n"

#: apt-pkg/cdrom.cc
msgid ""
"Unable to locate any package files, perhaps this is not a Debian Disc or the "
"wrong architecture?"
msgstr ""

#: apt-pkg/cdrom.cc
#, c-format
msgid "Found label '%s'\n"
msgstr "找到標籤 '%s'\n"

#: apt-pkg/cdrom.cc
msgid "That is not a valid name, try again.\n"
msgstr "這並不是正確的名稱,請重試。\n"

#: apt-pkg/cdrom.cc
#, c-format
msgid ""
"This disc is called: \n"
"'%s'\n"
msgstr ""
"這個碟片名為:\n"
"'%s'\n"

#: apt-pkg/cdrom.cc
msgid "Copying package lists..."
msgstr "正在複製套件清單..."

#: apt-pkg/cdrom.cc
msgid "Writing new source list\n"
msgstr "正在寫入新的來源列表\n"

#: apt-pkg/cdrom.cc
msgid "Source list entries for this disc are:\n"
msgstr "該碟片的來源列表項目為:\n"

#: apt-pkg/clean.cc
#, c-format
msgid "Unable to change to %s"
msgstr "無法切換至 %s"

#: apt-pkg/clean.cc
#, c-format
msgid "Unable to stat %s."
msgstr "無法取得 %s 的狀態。"

#: apt-pkg/contrib/cdromutl.cc
#, c-format
msgid "Unable to stat the mount point %s"
msgstr "無法取得掛載點 %s 的狀態"

#: apt-pkg/contrib/cdromutl.cc
msgid "Failed to stat the cdrom"
msgstr "無法取得 CD-ROM 的狀態"

#: apt-pkg/contrib/cmndline.cc
#, fuzzy, c-format
msgid ""
"Command line option '%c' [from %s] is not understood in combination with the "
"other options."
msgstr "未知的命令列選項 '%c' [來自 %s]。"

#: apt-pkg/contrib/cmndline.cc
#, fuzzy, c-format
msgid ""
"Command line option %s is not understood in combination with the other "
"options"
msgstr "無法理解的命令列選項 %s"

#: apt-pkg/contrib/cmndline.cc
#, c-format
msgid "Command line option %s is not boolean"
msgstr "命令列選項 %s 不是 boolean 值"

#: apt-pkg/contrib/cmndline.cc
#, c-format
msgid "Option %s requires an argument."
msgstr "需替選項 %s 指定參數。"

#: apt-pkg/contrib/cmndline.cc
#, c-format
msgid "Option %s: Configuration item specification must have an =<val>."
msgstr "選項 %s:在指定設定項目時應該有 =<val>。"

#: apt-pkg/contrib/cmndline.cc
#, c-format
msgid "Option %s requires an integer argument, not '%s'"
msgstr "選項 %s 的參數應該是數字,而不是 '%s'"

#: apt-pkg/contrib/cmndline.cc
#, c-format
msgid "Option '%s' is too long"
msgstr "選項 %s 太長"

#: apt-pkg/contrib/cmndline.cc
#, c-format
msgid "Sense %s is not understood, try true or false."
msgstr "偵測器 %s 無法理解,試試 true 或 false。"

#: apt-pkg/contrib/cmndline.cc
#, c-format
msgid "Invalid operation %s"
msgstr "無效的操作 %s"

#: apt-pkg/contrib/configuration.cc
#, c-format
msgid "Unrecognized type abbreviation: '%c'"
msgstr "無法辨識的縮寫類型:'%c'"

#: apt-pkg/contrib/configuration.cc
#, c-format
msgid "Syntax error %s:%u: Block starts with no name."
msgstr "語法錯誤 %s:%u:區塊開頭沒有名稱。"

#: apt-pkg/contrib/configuration.cc
#, c-format
msgid "Syntax error %s:%u: Malformed tag"
msgstr "語法錯誤 %s:%u:標籤格式錯誤"

#: apt-pkg/contrib/configuration.cc
#, c-format
msgid "Syntax error %s:%u: Extra junk after value"
msgstr "語法錯誤 %s:%u:數值後有多餘的垃圾"

#: apt-pkg/contrib/configuration.cc
#, c-format
msgid "Syntax error %s:%u: Directives can only be done at the top level"
msgstr "語法錯誤 %s:%u:指令只能於最高層級執行"

#: apt-pkg/contrib/configuration.cc
#, c-format
msgid "Syntax error %s:%u: Too many nested includes"
msgstr "語法錯誤 %s:%u: 太多巢狀引入檔"

#: apt-pkg/contrib/configuration.cc
#, c-format
msgid "Syntax error %s:%u: Included from here"
msgstr "語法錯誤 %s:%u:從此引入"

#: apt-pkg/contrib/configuration.cc
#, c-format
msgid "Syntax error %s:%u: Unsupported directive '%s'"
msgstr "語法錯誤 %s:%u:不支援的指令 '%s'"

#: apt-pkg/contrib/configuration.cc
#, fuzzy, c-format
msgid "Syntax error %s:%u: clear directive requires an option tree as argument"
msgstr "語法錯誤 %s:%u:指令只能於最高層級執行"

#: apt-pkg/contrib/configuration.cc
#, c-format
msgid "Syntax error %s:%u: Extra junk at end of file"
msgstr "語法錯誤 %s:%u:在檔案結尾有多餘的垃圾"

#: apt-pkg/contrib/fileutl.cc
#, fuzzy, c-format
msgid "Problem unlinking the file %s"
msgstr "在刪除檔案時發生問題"

#: apt-pkg/contrib/fileutl.cc
#, c-format
msgid "Not using locking for read only lock file %s"
msgstr "不在唯讀檔案 %s 上使用檔案鎖定"

#: apt-pkg/contrib/fileutl.cc
#, c-format
msgid "Could not open lock file %s"
msgstr "無法開啟鎖定檔 %s"

#: apt-pkg/contrib/fileutl.cc
#, c-format
msgid "Not using locking for nfs mounted lock file %s"
msgstr "不在以 nfs 掛載的檔案 %s 上使用檔案鎖定"

#: apt-pkg/contrib/fileutl.cc
#, c-format
msgid "Could not get lock %s"
msgstr "無法將 %s 鎖定"

#: apt-pkg/contrib/fileutl.cc
#, c-format
msgid "List of files can't be created as '%s' is not a directory"
msgstr ""

#: apt-pkg/contrib/fileutl.cc
#, c-format
msgid "Ignoring '%s' in directory '%s' as it is not a regular file"
msgstr ""

#: apt-pkg/contrib/fileutl.cc
#, c-format
msgid "Ignoring file '%s' in directory '%s' as it has no filename extension"
msgstr ""

#: apt-pkg/contrib/fileutl.cc
#, c-format
msgid ""
"Ignoring file '%s' in directory '%s' as it has an invalid filename extension"
msgstr ""

#: apt-pkg/contrib/fileutl.cc apt-pkg/contrib/gpgv.cc apt-pkg/deb/debsystem.cc
#: cmdline/apt-dump-solver.cc
#, c-format
msgid "Waited for %s but it wasn't there"
msgstr "等待 %s 但是它並不存在"

#: apt-pkg/contrib/fileutl.cc
#, c-format
msgid "Sub-process %s received a segmentation fault."
msgstr "子程序 %s 收到一個記憶體錯誤。"

#: apt-pkg/contrib/fileutl.cc
#, fuzzy, c-format
msgid "Sub-process %s received signal %u."
msgstr "子程序 %s 收到一個記憶體錯誤。"

#. we forward the statuscode, so don't generate a message on the fd in this case
#: apt-pkg/contrib/fileutl.cc apt-pkg/contrib/gpgv.cc
#, c-format
msgid "Sub-process %s returned an error code (%u)"
msgstr "子程序 %s 傳回錯誤碼 (%u)"

#: apt-pkg/contrib/fileutl.cc apt-pkg/contrib/gpgv.cc
#, c-format
msgid "Sub-process %s exited unexpectedly"
msgstr "子程序 %s 不預期得結束"

#: apt-pkg/contrib/fileutl.cc methods/ftp.cc methods/rsh.cc
msgid "Read error"
msgstr "讀取錯誤"

#: apt-pkg/contrib/fileutl.cc methods/ftp.cc methods/rsh.cc
msgid "Write error"
msgstr "寫入錯誤"

#: apt-pkg/contrib/fileutl.cc
#, fuzzy, c-format
msgid "Problem closing the gzip file %s"
msgstr "在關閉檔案時發生問題"

#: apt-pkg/contrib/fileutl.cc
msgid "Unexpected end of file"
msgstr ""

#: apt-pkg/contrib/fileutl.cc
msgid "Failed to create subprocess IPC"
msgstr "無法建立子程序 IPC"

#: apt-pkg/contrib/fileutl.cc
msgid "Failed to exec compressor "
msgstr "無法執行壓縮程式"

#: apt-pkg/contrib/fileutl.cc
#, c-format
msgid "Could not open file %s"
msgstr "無法開啟檔案 %s"

#: apt-pkg/contrib/fileutl.cc
#, fuzzy, c-format
msgid "Could not open file descriptor %d"
msgstr "無法開啟管線給 %s 使用"

#: apt-pkg/contrib/fileutl.cc
#, fuzzy, c-format
msgid "read, still have %llu to read but none left"
msgstr "讀取,仍有 %lu 未讀但已無空間"

#: apt-pkg/contrib/fileutl.cc
#, fuzzy, c-format
msgid "write, still have %llu to write but couldn't"
msgstr "寫入,仍有 %lu 待寫入但已沒辨法"

#: apt-pkg/contrib/fileutl.cc
#, fuzzy, c-format
msgid "Problem closing the file %s"
msgstr "在關閉檔案時發生問題"

#: apt-pkg/contrib/fileutl.cc
#, fuzzy, c-format
msgid "Problem renaming the file %s to %s"
msgstr "在同步檔案時發生問題"

#: apt-pkg/contrib/fileutl.cc
msgid "Problem syncing the file"
msgstr "在同步檔案時發生問題"

#: apt-pkg/contrib/fileutl.cc cmdline/apt-extracttemplates.cc
#, fuzzy, c-format
msgid "Unable to mkstemp %s"
msgstr "無法取得 %s 的狀態"

#: apt-pkg/contrib/fileutl.cc cmdline/apt-extracttemplates.cc
#, c-format
msgid "Unable to write to %s"
msgstr "無法寫入 %s"

#: apt-pkg/contrib/mmap.cc
msgid "Can't mmap an empty file"
msgstr "不能 mmap 空白檔案"

#: apt-pkg/contrib/mmap.cc
#, fuzzy, c-format
msgid "Couldn't make mmap of %llu bytes"
msgstr "無法 mmap 到 %lu 位元組"

#: apt-pkg/contrib/mmap.cc
#, fuzzy, c-format
msgid "Couldn't duplicate file descriptor %i"
msgstr "無法開啟管線給 %s 使用"

#: apt-pkg/contrib/mmap.cc
#, fuzzy
msgid "Unable to close mmap"
msgstr "無法開啟 %s"

#: apt-pkg/contrib/mmap.cc
#, fuzzy
msgid "Unable to synchronize mmap"
msgstr "無法 invoke "

#: apt-pkg/contrib/mmap.cc
#, c-format
msgid "Couldn't make mmap of %lu bytes"
msgstr "無法 mmap 到 %lu 位元組"

#: apt-pkg/contrib/mmap.cc
msgid "Failed to truncate file"
msgstr "無法截短檔案"

#: apt-pkg/contrib/mmap.cc
#, c-format
msgid ""
"Dynamic MMap ran out of room. Please increase the size of APT::Cache-Start. "
"Current value: %lu. (man 5 apt.conf)"
msgstr ""
"動態 MMap 已用完所有空間。請增加 APT::Cache-Start 的大小。目前大小為:%lu。"
"(man 5 apt.conf)"

#: apt-pkg/contrib/mmap.cc
#, c-format
msgid ""
"Unable to increase the size of the MMap as the limit of %lu bytes is already "
"reached."
msgstr ""

#: apt-pkg/contrib/mmap.cc
msgid ""
"Unable to increase size of the MMap as automatic growing is disabled by user."
msgstr ""

#: apt-pkg/contrib/progress.cc
#, c-format
msgid "%c%s... Error!"
msgstr "%c%s... 錯誤!"

#: apt-pkg/contrib/progress.cc
#, c-format
msgid "%c%s... Done"
msgstr "%c%s... 完成"

#: apt-pkg/contrib/progress.cc
msgid "..."
msgstr ""

#. Print the spinner
#: apt-pkg/contrib/progress.cc
#, fuzzy, c-format
msgid "%c%s... %u%%"
msgstr "%c%s... 完成"

#. TRANSLATOR: d means days, h means hours, min means minutes, s means seconds
#: apt-pkg/contrib/strutl.cc
#, c-format
msgid "%lid %lih %limin %lis"
msgstr ""

#. TRANSLATOR: h means hours, min means minutes, s means seconds
#: apt-pkg/contrib/strutl.cc
#, c-format
msgid "%lih %limin %lis"
msgstr ""

#. TRANSLATOR: min means minutes, s means seconds
#: apt-pkg/contrib/strutl.cc
#, c-format
msgid "%limin %lis"
msgstr ""

#. TRANSLATOR: s means seconds
#: apt-pkg/contrib/strutl.cc
#, c-format
msgid "%lis"
msgstr ""

#: apt-pkg/contrib/strutl.cc
#, c-format
msgid "Selection %s not found"
msgstr "選項 %s 找不到"

#. TRANSLATOR: an identifier like Packages; Releasefile key indicating
#. a file like main/binary-amd64/Packages; another identifier like Contents;
#. filename and linenumber of the sources.list entry currently parsed
#: apt-pkg/deb/debmetaindex.cc
#, c-format
msgid "Target %s wants to acquire the same file (%s) as %s from source %s"
msgstr ""

#. TRANSLATOR: an identifier like Packages; Releasefile key indicating
#. a file like main/binary-amd64/Packages; filename and linenumber of
#. two sources.list entries
#: apt-pkg/deb/debmetaindex.cc
#, c-format
msgid "Target %s (%s) is configured multiple times in %s and %s"
msgstr ""

#: apt-pkg/deb/debmetaindex.cc
#, c-format
msgid "Unable to parse Release file %s"
msgstr "無法辨別 Release 檔 %s"

#: apt-pkg/deb/debmetaindex.cc
#, c-format
msgid "No sections in Release file %s"
msgstr "在 Release 檔 %s 裡沒有區段"

#: apt-pkg/deb/debmetaindex.cc
#, c-format
msgid "No Hash entry in Release file %s"
msgstr "在 Release 檔 %s 裡沒有 Hash 項目"

#: apt-pkg/deb/debmetaindex.cc
#, c-format
msgid ""
"No Hash entry in Release file %s which is considered strong enough for "
"security purposes"
msgstr ""

#: apt-pkg/deb/debmetaindex.cc
#, fuzzy, c-format
msgid "Invalid '%s' entry in Release file %s"
msgstr "在 Release 檔 %s 裡沒有 Hash 項目"

#. TRANSLATOR: The first is an option name from sources.list manpage, the other two URI and Suite
#: apt-pkg/deb/debmetaindex.cc
#, c-format
msgid "Conflicting values set for option %s regarding source %s %s"
msgstr ""

#: apt-pkg/deb/debmetaindex.cc
#, c-format
msgid "Invalid value set for option %s regarding source %s %s (%s)"
msgstr ""

#: apt-pkg/deb/debmetaindex.cc
#, c-format
msgid "Conflicting values set for option %s regarding source %s %s: %s != %s"
msgstr ""

#: apt-pkg/deb/debrecords.cc apt-pkg/tagfile.cc
#, c-format
msgid "Unable to parse package file %s (%d)"
msgstr "無法辨識套件檔 %s (%d)"

#: apt-pkg/deb/debsystem.cc
#, c-format
msgid ""
"Unable to acquire the dpkg frontend lock (%s), is another process using it?"
msgstr ""

#: apt-pkg/deb/debsystem.cc
#, fuzzy, c-format
msgid "Unable to acquire the dpkg frontend lock (%s), are you root?"
msgstr "無法鎖定列表目錄"

#. TRANSLATORS: the %s contains the recovery command, usually
#. dpkg --configure -a
#: apt-pkg/deb/debsystem.cc
#, c-format
msgid ""
"dpkg was interrupted, you must manually run '%s' to correct the problem. "
msgstr ""

#: apt-pkg/deb/debsystem.cc
#, c-format
msgid ""
"Unable to lock the administration directory (%s), is another process using "
"it?"
msgstr ""

#: apt-pkg/deb/debsystem.cc
#, fuzzy, c-format
msgid "Unable to lock the administration directory (%s), are you root?"
msgstr "無法鎖定列表目錄"

#: apt-pkg/deb/debsystem.cc
msgid "Not locked"
msgstr ""

#. we don't care for the difference
#: apt-pkg/deb/dpkgpm.cc
#, c-format
msgid "Preparing %s"
msgstr "正在準備 %s"

#: apt-pkg/deb/dpkgpm.cc
#, c-format
msgid "Preparing to configure %s"
msgstr "正在準備設定 %s"

#: apt-pkg/deb/dpkgpm.cc
#, c-format
msgid "Preparing for removal of %s"
msgstr "正在準備移除 %s"

#: apt-pkg/deb/dpkgpm.cc
#, c-format
msgid "Preparing to completely remove %s"
msgstr "正在準備完整移除 %s"

#: apt-pkg/deb/dpkgpm.cc
#, c-format
msgid "Noting disappearance of %s"
msgstr ""

#: apt-pkg/deb/dpkgpm.cc
#, c-format
msgid "Running post-installation trigger %s"
msgstr "正在執行安裝後套件後續處理程式 %s"

#: apt-pkg/deb/dpkgpm.cc
#, c-format
msgid "Installed %s"
msgstr "已安裝 %s"

#: apt-pkg/deb/dpkgpm.cc
#, c-format
msgid "Configuring %s"
msgstr "正在設定 %s"

#. FIXME: use a better string after freeze
#: apt-pkg/deb/dpkgpm.cc
#, c-format
msgid "Directory '%s' missing"
msgstr "找不到 '%s' 目錄"

#: apt-pkg/deb/dpkgpm.cc apt-pkg/edsp.cc
#, fuzzy, c-format
msgid "Could not open file '%s'"
msgstr "無法開啟檔案 %s"

#: apt-pkg/deb/dpkgpm.cc
#, c-format
msgid "Unpacking %s"
msgstr "正在解開 %s"

#: apt-pkg/deb/dpkgpm.cc
#, c-format
msgid "Installing %s"
msgstr "正在安裝 %s"

#: apt-pkg/deb/dpkgpm.cc
#, c-format
msgid "Removing %s"
msgstr "正在移除 %s"

#: apt-pkg/deb/dpkgpm.cc
#, fuzzy, c-format
msgid "Completely removing %s"
msgstr "已完整移除 %s"

#: apt-pkg/deb/dpkgpm.cc
#, c-format
msgid "Completely removed %s"
msgstr "已完整移除 %s"

#: apt-pkg/deb/dpkgpm.cc
#, fuzzy, c-format
msgid "Can not write log (%s)"
msgstr "無法寫入 %s"

#: apt-pkg/deb/dpkgpm.cc
msgid "Is /dev/pts mounted?"
msgstr ""

#: apt-pkg/deb/dpkgpm.cc
msgid "Operation was interrupted before it could finish"
msgstr ""

#: apt-pkg/deb/dpkgpm.cc
msgid "No apport report written because MaxReports is reached already"
msgstr ""

#. check if its not a follow up error
#: apt-pkg/deb/dpkgpm.cc
msgid "dependency problems - leaving unconfigured"
msgstr ""

#: apt-pkg/deb/dpkgpm.cc
msgid ""
"No apport report written because the error message indicates its a followup "
"error from a previous failure."
msgstr ""

#: apt-pkg/deb/dpkgpm.cc
msgid ""
"No apport report written because the error message indicates a disk full "
"error"
msgstr ""

#: apt-pkg/deb/dpkgpm.cc
msgid ""
"No apport report written because the error message indicates a out of memory "
"error"
msgstr ""

#: apt-pkg/deb/dpkgpm.cc
msgid ""
"No apport report written because the error message indicates an issue on the "
"local system"
msgstr ""

#: apt-pkg/deb/dpkgpm.cc
msgid ""
"No apport report written because the error message indicates a dpkg I/O error"
msgstr ""

#: apt-pkg/depcache.cc
msgid "Building dependency tree"
msgstr "正在重建相依關係"

#: apt-pkg/depcache.cc
msgid "Candidate versions"
msgstr "候選版本"

#: apt-pkg/depcache.cc
msgid "Dependency generation"
msgstr "建立相依關係"

#: apt-pkg/depcache.cc
msgid "Reading state information"
msgstr "正在讀取狀態資料"

#: apt-pkg/depcache.cc
#, c-format
msgid "Failed to open StateFile %s"
msgstr "無法開啟 StateFile %s"

#: apt-pkg/depcache.cc
#, c-format
msgid "Failed to write temporary StateFile %s"
msgstr "無法寫入暫存的 StateFile %s"

#: apt-pkg/edsp.cc
msgid "Send scenario to solver"
msgstr ""

#: apt-pkg/edsp.cc
msgid "Send request to solver"
msgstr ""

#: apt-pkg/edsp.cc
msgid "Prepare for receiving solution"
msgstr ""

#: apt-pkg/edsp.cc
msgid "External solver failed without a proper error message"
msgstr ""

#: apt-pkg/edsp.cc
msgid "Execute external solver"
msgstr ""

#: apt-pkg/edsp.cc
msgid "Execute external planner"
msgstr ""

#: apt-pkg/edsp.cc
msgid "Send request to planner"
msgstr ""

#: apt-pkg/edsp.cc
msgid "Send scenario to planner"
msgstr ""

#: apt-pkg/edsp.cc
msgid "External planner failed without a proper error message"
msgstr ""

#: apt-pkg/indexcopy.cc
#, c-format
msgid "Wrote %i records.\n"
msgstr "寫入 %i 筆紀錄。\n"

#: apt-pkg/indexcopy.cc
#, c-format
msgid "Wrote %i records with %i missing files.\n"
msgstr "寫入 %i 筆紀綠,其中有 %i 個檔案遺失了。\n"

#: apt-pkg/indexcopy.cc
#, c-format
msgid "Wrote %i records with %i mismatched files\n"
msgstr "寫入 %i 筆紀綠,其中有 %i 個檔案不符\n"

#: apt-pkg/indexcopy.cc
#, c-format
msgid "Wrote %i records with %i missing files and %i mismatched files\n"
msgstr "寫入 %i 筆紀綠,其中有 %i 個檔案遺失了,有 %i 個檔案不符\n"

#: apt-pkg/indexcopy.cc
#, c-format
msgid "Can't find authentication record for: %s"
msgstr ""

#: apt-pkg/indexcopy.cc
#, fuzzy, c-format
msgid "Hash mismatch for: %s"
msgstr "Hash Sum 不符"

#: apt-pkg/init.cc
#, c-format
msgid "Packaging system '%s' is not supported"
msgstr "不支援的套件包裝系統 '%s'"

#: apt-pkg/init.cc
msgid "Unable to determine a suitable packaging system type"
msgstr "無法確認合適的套件包裝系統類型"

#: apt-pkg/install-progress.cc
#, c-format
msgid "Progress: [%3li%%]"
msgstr ""

#. send status information that we are about to fork dpkg
#: apt-pkg/install-progress.cc
msgid "Running dpkg"
msgstr ""

#: apt-pkg/packagemanager.cc
#, c-format
msgid ""
"Could not perform immediate configuration on '%s'. Please see man 5 apt.conf "
"under APT::Immediate-Configure for details. (%d)"
msgstr ""

#: apt-pkg/packagemanager.cc
#, fuzzy, c-format
msgid "Could not configure '%s'. "
msgstr "無法開啟檔案 %s"

#: apt-pkg/packagemanager.cc
#, c-format
msgid ""
"This installation run will require temporarily removing the essential "
"package %s due to a Conflicts/Pre-Depends loop. This is often bad, but if "
"you really want to do it, activate the APT::Force-LoopBreak option."
msgstr ""
"此安裝因衝突或預先相依關係,需暫時刪除 %s 這個基本套件。這通常不是好主意,但"
"若您執意進行,請設定 APT::Force-LoopBreak 選項。"

#: apt-pkg/pkgcache.cc
msgid "Empty package cache"
msgstr "清空套件快取"

#: apt-pkg/pkgcache.cc
msgid "The package cache file is corrupted"
msgstr "套件快取檔損壞"

#: apt-pkg/pkgcache.cc
msgid "The package cache file is an incompatible version"
msgstr "套件快取檔版本不符"

#: apt-pkg/pkgcache.cc
#, c-format
msgid "This APT does not support the versioning system '%s'"
msgstr "本 APT 不支援 '%s' 版本系統"

#: apt-pkg/pkgcache.cc
#, fuzzy, c-format
msgid "The package cache was built for different architectures: %s vs %s"
msgstr "這個套件快取是用於另一種平台的"

#: apt-pkg/pkgcache.cc
#, fuzzy
msgid "The package cache file is corrupted, it has the wrong hash"
msgstr "套件快取檔損壞"

#: apt-pkg/pkgcache.cc
msgid "Depends"
msgstr "相依關係"

#: apt-pkg/pkgcache.cc
msgid "PreDepends"
msgstr "預先相依關係"

#: apt-pkg/pkgcache.cc
msgid "Suggests"
msgstr "建議"

#: apt-pkg/pkgcache.cc
msgid "Conflicts"
msgstr "衝突"

#: apt-pkg/pkgcache.cc
msgid "Recommends"
msgstr "推薦"

#: apt-pkg/pkgcache.cc
msgid "Replaces"
msgstr "取代"

#: apt-pkg/pkgcache.cc
msgid "Breaks"
msgstr "毀損"

#: apt-pkg/pkgcache.cc
msgid "Enhances"
msgstr ""

#: apt-pkg/pkgcache.cc
msgid "Obsoletes"
msgstr "廢棄"

#: apt-pkg/pkgcache.cc
msgid "important"
msgstr "重要"

#: apt-pkg/pkgcache.cc
msgid "required"
msgstr "必要"

#: apt-pkg/pkgcache.cc
msgid "standard"
msgstr "標準"

#: apt-pkg/pkgcache.cc
msgid "extra"
msgstr "額外"

#: apt-pkg/pkgcache.cc
msgid "optional"
msgstr "次要"

#: apt-pkg/pkgcachegen.cc
msgid "Cache has an incompatible versioning system"
msgstr "快取使用的是不相容的版本系統"

#. TRANSLATOR: The first placeholder is a package name,
#. the other two should be copied verbatim as they include debug info
#: apt-pkg/pkgcachegen.cc
#, fuzzy, c-format
msgid "Error occurred while processing %s (%s%d)"
msgstr "在處理 %s 時發生錯誤 (FindPkg)"

#: apt-pkg/pkgcachegen.cc
msgid "Wow, you exceeded the number of package names this APT is capable of."
msgstr "哇呀,您已經超過這個 APT 所能處理的套件名稱數量了。"

#: apt-pkg/pkgcachegen.cc
msgid "Wow, you exceeded the number of versions this APT is capable of."
msgstr "哇呀,您已經超過這個 APT 所能處理的版本數量了。"

#: apt-pkg/pkgcachegen.cc
msgid "Wow, you exceeded the number of descriptions this APT is capable of."
msgstr "哇呀,您已經超過這個 APT 所能處理的說明數量了。"

#: apt-pkg/pkgcachegen.cc
msgid "Wow, you exceeded the number of dependencies this APT is capable of."
msgstr "哇呀,您已經超過這個 APT 所能處理的相依關係數量了。"

#: apt-pkg/pkgcachegen.cc
msgid "Reading package lists"
msgstr "正在讀取套件清單"

#: apt-pkg/pkgcachegen.cc
msgid "IO Error saving source cache"
msgstr "在儲存來源快取時 IO 錯誤"

#: apt-pkg/pkgrecords.cc
#, c-format
msgid "Index file type '%s' is not supported"
msgstr "不被支援的索引檔類型 '%s'"

#: apt-pkg/policy.cc
#, c-format
msgid ""
"The value '%s' is invalid for APT::Default-Release as such a release is not "
"available in the sources"
msgstr ""

#: apt-pkg/policy.cc
#, fuzzy, c-format
msgid "Invalid record in the preferences file %s, no Package header"
msgstr "個人設定檔中有些不正確資料,沒有以 Package 開頭"

#: apt-pkg/policy.cc
#, c-format
msgid "Did not understand pin type %s"
msgstr "無法分析鎖定類型 %s"

#: apt-pkg/policy.cc
#, c-format
msgid "%s: Value %s is outside the range of valid pin priorities (%d to %d)"
msgstr ""

#: apt-pkg/policy.cc
msgid "No priority (or zero) specified for pin"
msgstr "銷定並沒有優先順序之分(或零)"

#. TRANSLATOR: %u is a line number, the first %s is a filename of a file with the extension "second %s" and the third %s is a unique identifier for bugreports
#: apt-pkg/sourcelist.cc
#, fuzzy, c-format
msgid "Malformed entry %u in %s file %s (%s)"
msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #1"

#: apt-pkg/sourcelist.cc
#, c-format
msgid "Malformed line %u in source list %s (type)"
msgstr "來源列表 %2$s 中的第 %1$u 行的格式錯誤(類型)"

#: apt-pkg/sourcelist.cc
#, c-format
msgid "Type '%s' is not known on line %u in source list %s"
msgstr "未知的類型 '%1$s',位於在來源列表 %3$s 中的第 %2$u 行"

#: apt-pkg/sourcelist.cc
#, fuzzy, c-format
msgid "Malformed stanza %u in source list %s (type)"
msgstr "來源列表 %2$s 中的第 %1$u 行的格式錯誤(類型)"

#: apt-pkg/sourcelist.cc
#, fuzzy, c-format
msgid "Type '%s' is not known on stanza %u in source list %s"
msgstr "未知的類型 '%1$s',位於在來源列表 %3$s 中的第 %2$u 行"

#: apt-pkg/sourcelist.cc apt-private/private-install.cc
#, c-format
msgid "Unsupported file %s given on commandline"
msgstr ""

#: apt-pkg/srcrecords.cc
msgid "You must put some 'source' URIs in your sources.list"
msgstr "在 sources.list 中必須包含一些 'source' URI"

#: apt-pkg/tagfile.cc
#, c-format
msgid "Cannot convert %s to integer: out of range"
msgstr ""

#: apt-pkg/update.cc
#, fuzzy
msgid ""
"Some index files failed to download. They have been ignored, or old ones "
"used instead."
msgstr "有一些索引檔不能下載,它們可能被略過了,或是替而使用原有的索引檔。"

#: apt-pkg/upgrade.cc
msgid "Calculating upgrade"
msgstr "籌備升級中"

#. TRANSLATOR: Very short word to be displayed before unchanged files in 'apt-get update'
#: apt-private/acqprogress.cc
#, c-format
msgid "Hit:%lu %s"
msgstr "已有:%lu %s"

#. TRANSLATOR: Very short word to be displayed for files processed in 'apt-get update'
#. Potentially replaced later by "Hit:", "Ign:" or "Err:" if something (bad) happens
#: apt-private/acqprogress.cc
#, c-format
msgid "Get:%lu %s"
msgstr "下載:%lu %s"

#. TRANSLATOR: Very short word to be displayed for files in 'apt-get update'
#. which failed to download, but the error is ignored (compare "Err:")
#: apt-private/acqprogress.cc
#, c-format
msgid "Ign:%lu %s"
msgstr "略過:%lu %s"

#. TRANSLATOR: Very short word to be displayed for files in 'apt-get update'
#. which failed to download and the error is critical (compare "Ign:")
#: apt-private/acqprogress.cc
#, c-format
msgid "Err:%lu %s"
msgstr "錯誤:%lu %s"

#: apt-private/acqprogress.cc
#, c-format
msgid "Fetched %sB in %s (%sB/s)\n"
msgstr "取得 %sB 用了 %s (%sB/s)\n"

#: apt-private/acqprogress.cc
msgid " [Working]"
msgstr " [工作中]"

#: apt-private/acqprogress.cc
#, c-format
msgid ""
"Media change: please insert the disc labeled\n"
" '%s'\n"
"in the drive '%s' and press [Enter]\n"
msgstr ""
"更換媒體:請把以下名稱的光碟\n"
" '%s'\n"
"放入 '%s' 裝置,然後按 [Enter] 鍵\n"

#: apt-private/acqprogress.cc
msgid ""
"Do you want to accept these changes and continue updating from this "
"repository?"
msgstr ""

#: apt-private/private-cachefile.cc
msgid "Correcting dependencies..."
msgstr "正在修正相依關係..."

#: apt-private/private-cachefile.cc
msgid " failed."
msgstr " 失敗。"

#: apt-private/private-cachefile.cc
msgid "Unable to correct dependencies"
msgstr "無法修正相依關係"

#: apt-private/private-cachefile.cc
msgid "Unable to minimize the upgrade set"
msgstr "無法將升級計劃最小化"

#: apt-private/private-cachefile.cc
msgid " Done"
msgstr " 完成"

#: apt-private/private-cachefile.cc apt-private/private-install.cc
msgid "You might want to run 'apt --fix-broken install' to correct these."
msgstr "您也許得執行 'apt --fix-broken install' 以修正這些問題。"

#: apt-private/private-cachefile.cc apt-private/private-install.cc
msgid ""
"Unmet dependencies. Try 'apt --fix-broken install' with no packages (or "
"specify a solution)."
msgstr ""
"未能滿足相依關係。請試著不指定套件來執行 'apt --fix-broken install'(或採取其"
"它的解決方案)。"

#: apt-private/private-cacheset.cc apt-private/private-search.cc
msgid "Sorting"
msgstr ""

#: apt-private/private-cacheset.cc
#, fuzzy, c-format
msgid "Note, selecting '%s' for task '%s'\n"
msgstr "注意,根據正規表示式 '%2$s' 而選擇了 %1$s\n"

#: apt-private/private-cacheset.cc
#, fuzzy, c-format
msgid "Note, selecting '%s' for glob '%s'\n"
msgstr "注意,根據正規表示式 '%2$s' 而選擇了 %1$s\n"

#: apt-private/private-cacheset.cc
#, fuzzy, c-format
msgid "Note, selecting '%s' for regex '%s'\n"
msgstr "注意,根據正規表示式 '%2$s' 而選擇了 %1$s\n"

#: apt-private/private-cacheset.cc
#, c-format
msgid "Package %s is a virtual package provided by:\n"
msgstr "套件 %s 是虛擬套件,提供者為:\n"

#: apt-private/private-cacheset.cc
msgid " [Installed]"
msgstr "【已安裝】"

#: apt-private/private-cacheset.cc
msgid " [Not candidate version]"
msgstr "【非候選版本】"

#: apt-private/private-cacheset.cc
msgid "You should explicitly select one to install."
msgstr "請您明確地選擇一個來進行安裝。"

#: apt-private/private-cacheset.cc
#, c-format
msgid ""
"Package %s is not available, but is referred to by another package.\n"
"This may mean that the package is missing, has been obsoleted, or\n"
"is only available from another source\n"
msgstr ""
"無法取得套件 %s,但它卻被其它的套件引用了。\n"
"這意味著這個套件可能已經消失了、被廢棄了,或是只能由其他的來源取得\n"

#: apt-private/private-cacheset.cc
msgid "However the following packages replace it:"
msgstr "然而,下列的套件取代了它:"

#: apt-private/private-cacheset.cc
#, c-format
msgid "Package '%s' has no installation candidate"
msgstr "套件 %s 沒有可安裝的候選版本"

#: apt-private/private-cacheset.cc
#, c-format
msgid "Virtual packages like '%s' can't be removed\n"
msgstr ""

#. TRANSLATORS: Note, this is not an interactive question
#: apt-private/private-cacheset.cc apt-private/private-install.cc
#, fuzzy, c-format
msgid "Package '%s' is not installed, so not removed. Did you mean '%s'?\n"
msgstr "套件 %s 並沒有被安裝,所以也不會被移除\n"

#: apt-private/private-cacheset.cc apt-private/private-install.cc
#, fuzzy, c-format
msgid "Package '%s' is not installed, so not removed\n"
msgstr "套件 %s 並沒有被安裝,所以也不會被移除\n"

#: apt-private/private-cacheset.cc
#, fuzzy, c-format
msgid "Note, selecting '%s' instead of '%s'\n"
msgstr "注意,選擇了以 %s 替代 %s\n"

#: apt-private/private-cmndline.cc
msgid "Most used commands:"
msgstr ""

#: apt-private/private-cmndline.cc
#, c-format
msgid "See %s for more information about the available commands."
msgstr ""

#: apt-private/private-cmndline.cc
msgid ""
"Configuration options and syntax is detailed in apt.conf(5).\n"
"Information about how to configure sources can be found in sources.list(5).\n"
"Package and version choices can be expressed via apt_preferences(5).\n"
"Security details are available in apt-secure(8).\n"
msgstr ""

#: apt-private/private-cmndline.cc
msgid "This APT has Super Cow Powers."
msgstr "該 APT 有著超級牛力。"

#: apt-private/private-cmndline.cc
msgid "This APT helper has Super Meep Powers."
msgstr ""

#: apt-private/private-cmndline.cc
msgid ""
"--force-yes is deprecated, use one of the options starting with --allow "
"instead."
msgstr ""

#: apt-private/private-depends.cc apt-private/private-show.cc
#: cmdline/apt-mark.cc
msgid "No packages found"
msgstr "未找到套件"

#: apt-private/private-download.cc
msgid "WARNING: The following packages cannot be authenticated!"
msgstr "【警告】:無法驗證下列套件!"

#: apt-private/private-download.cc
msgid "Authentication warning overridden.\n"
msgstr "忽略了驗證警告。\n"

#: apt-private/private-download.cc
msgid "Some packages could not be authenticated"
msgstr "有部份套件無法驗證"

#: apt-private/private-download.cc
msgid "Install these packages without verification?"
msgstr "是否不經驗證就安裝這些套件?"

#: apt-private/private-download.cc
#, fuzzy
msgid ""
"There were unauthenticated packages and -y was used without --allow-"
"unauthenticated"
msgstr "發生了問題,且 -y 並沒有和 --force-yes 搭配使用"

#: apt-private/private-download.cc
#, c-format
msgid "Couldn't determine free space in %s"
msgstr "無法確認 %s 的未使用空間"

#: apt-private/private-download.cc
#, c-format
msgid "You don't have enough free space in %s."
msgstr "在 %s 裡沒有足夠的的未使用空間。"

#: apt-private/private-download.cc
msgid "Unable to lock the download directory"
msgstr "無法鎖定下載目錄"

#: apt-private/private-install.cc
msgid ""
"Some packages could not be installed. This may mean that you have\n"
"requested an impossible situation or if you are using the unstable\n"
"distribution that some required packages have not yet been created\n"
"or been moved out of Incoming."
msgstr ""
"有些套件無法安裝。這可能意謂著您的要求難以解決,或是若您使用的是\n"
"unstable 發行版,可能有些必要的套件尚未建立,或是被移出 Incoming 了。"

#.
#. if (Packages == 1)
#. {
#. c1out << std::endl;
#. c1out <<
#. _("Since you only requested a single operation it is extremely likely that\n"
#. "the package is simply not installable and a bug report against\n"
#. "that package should be filed.") << std::endl;
#. }
#.
#: apt-private/private-install.cc
msgid "The following information may help to resolve the situation:"
msgstr "以下的資訊或許有助於解決當前的情況:"

#: apt-private/private-install.cc
msgid "Broken packages"
msgstr "損毀的套件"

#: apt-private/private-install.cc
msgid ""
"Unable to fetch some archives, maybe run apt-get update or try with --fix-"
"missing?"
msgstr ""
"有部份套件檔無法取得,試著執行 apt-get update 或者試著加上 --fix-missing 選"
"項?"

#: apt-private/private-install.cc
msgid "Internal error, InstallPackages was called with broken packages!"
msgstr "內部錯誤,在損毀的套件上執行 InstallPackages!"

#: apt-private/private-install.cc
msgid "Packages need to be removed but remove is disabled."
msgstr "有套件需要被移除,但卻被禁止移除。"

#: apt-private/private-install.cc
#, fuzzy
msgid ""
"Essential packages were removed and -y was used without --allow-remove-"
"essential."
msgstr "發生了問題,且 -y 並沒有和 --force-yes 搭配使用"

#: apt-private/private-install.cc
#, fuzzy
msgid "Packages were downgraded and -y was used without --allow-downgrades."
msgstr "發生了問題,且 -y 並沒有和 --force-yes 搭配使用"

#: apt-private/private-install.cc
msgid ""
"Held packages were changed and -y was used without --allow-change-held-"
"packages."
msgstr ""

#: apt-private/private-install.cc
msgid "Internal error, Ordering didn't finish"
msgstr "內部錯誤,排序未能完成"

#: apt-private/private-install.cc
msgid "How odd... The sizes didn't match, email apt@packages.debian.org"
msgstr "怪哉... 檔案大小不符,請發信給 apt@packages.debian.org"

#. TRANSLATOR: The required space between number and unit is already included
#. in the replacement strings, so %sB will be correctly translate in e.g. 1,5 MB
#: apt-private/private-install.cc
#, c-format
msgid "Need to get %sB/%sB of archives.\n"
msgstr "需要下載 %sB/%sB 的套件檔。\n"

#. TRANSLATOR: The required space between number and unit is already included
#. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB
#: apt-private/private-install.cc
#, c-format
msgid "Need to get %sB of archives.\n"
msgstr "需要下載 %sB 的套件檔。\n"

#. TRANSLATOR: The required space between number and unit is already included
#. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB
#: apt-private/private-install.cc
#, c-format
msgid "After this operation, %sB of additional disk space will be used.\n"
msgstr "此操作完成之後,會多佔用 %sB 的磁碟空間。\n"

#. TRANSLATOR: The required space between number and unit is already included
#. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB
#: apt-private/private-install.cc
#, c-format
msgid "After this operation, %sB disk space will be freed.\n"
msgstr "此操作完成之後,會空出 %sB 的磁碟空間。\n"

#: apt-private/private-install.cc
msgid "Trivial Only specified but this is not a trivial operation."
msgstr "雖然指定了 Trivial Only(自動答 NO)選項,但這並不是 trivial 操作。"

#. TRANSLATOR: This string needs to be typed by the user as a confirmation, so be
#. careful with hard to type or special characters (like non-breaking spaces)
#: apt-private/private-install.cc
msgid "Yes, do as I say!"
msgstr "Yes, do as I say!"

#: apt-private/private-install.cc
#, c-format
msgid ""
"You are about to do something potentially harmful.\n"
"To continue type in the phrase '%s'\n"
" ?] "
msgstr ""
"您所進行的操作可能會帶來危險。\n"
"請輸入 '%s' 這個句子以繼續進行\n"
" ?] "

#: apt-private/private-install.cc
msgid "Abort."
msgstr "放棄執行。"

#: apt-private/private-install.cc
msgid "Do you want to continue?"
msgstr "是否繼續進行 [Y/n]?"

#: apt-private/private-install.cc
msgid "Some files failed to download"
msgstr "有部份檔案無法下載"

#: apt-private/private-install.cc apt-private/private-source.cc
msgid "Download complete and in download only mode"
msgstr "下載完成,且這是『僅下載』模式"

#: apt-private/private-install.cc
msgid "--fix-missing and media swapping is not currently supported"
msgstr "目前尚未支援 --fix-missing 和媒體抽換"

#: apt-private/private-install.cc
msgid "Unable to correct missing packages."
msgstr "無法修正欠缺的套件。"

#: apt-private/private-install.cc
msgid "Aborting install."
msgstr "放棄安裝。"

#: apt-private/private-install.cc
msgid ""
"The following package disappeared from your system as\n"
"all files have been overwritten by other packages:"
msgid_plural ""
"The following packages disappeared from your system as\n"
"all files have been overwritten by other packages:"
msgstr[0] ""
msgstr[1] ""

#: apt-private/private-install.cc
msgid "Note: This is done automatically and on purpose by dpkg."
msgstr ""

#: apt-private/private-install.cc
msgid "We are not supposed to delete stuff, can't start AutoRemover"
msgstr "我們沒有計劃要刪除任何東西,無法啟動 AutoRemover"

#: apt-private/private-install.cc
msgid ""
"Hmm, seems like the AutoRemover destroyed something which really\n"
"shouldn't happen. Please file a bug report against apt."
msgstr ""
"嗯,看起來 AutoRemover 弄壞了什麼東西,而這是不該發生的。\n"
"請針對 apt 發佈錯誤回報。"

#: apt-private/private-install.cc
msgid "Internal Error, AutoRemover broke stuff"
msgstr "內部錯誤,AutoRemover 處理失敗"

#: apt-private/private-install.cc
#, fuzzy
msgid ""
"The following package was automatically installed and is no longer required:"
msgid_plural ""
"The following packages were automatically installed and are no longer "
"required:"
msgstr[0] "以下套件是被自動安裝進來的,且已不再會被用到了:"
msgstr[1] "以下套件是被自動安裝進來的,且已不再會被用到了:"

#: apt-private/private-install.cc
#, fuzzy, c-format
msgid "%lu package was automatically installed and is no longer required.\n"
msgid_plural ""
"%lu packages were automatically installed and are no longer required.\n"
msgstr[0] "以下套件是被自動安裝進來的,且已不再會被用到了:"
msgstr[1] "以下套件是被自動安裝進來的,且已不再會被用到了:"

#: apt-private/private-install.cc
#, fuzzy, c-format
msgid "Use '%s' to remove it."
msgid_plural "Use '%s' to remove them."
msgstr[0] "使用 '%s' 來將其移除。"
msgstr[1] "使用 '%s' 來將其移除。"

#: apt-private/private-install.cc
msgid "The following additional packages will be installed:"
msgstr "下列的額外套件將被安裝:"

#: apt-private/private-install.cc
msgid "Suggested packages:"
msgstr "建議套件:"

#: apt-private/private-install.cc
msgid "Recommended packages:"
msgstr "推薦套件:"

#: apt-private/private-install.cc
#, c-format
msgid "Skipping %s, it is already installed and upgrade is not set.\n"
msgstr "忽略 %s,它已被安裝且沒有計劃要進行升級。\n"

#: apt-private/private-install.cc
#, fuzzy, c-format
msgid "Skipping %s, it is not installed and only upgrades are requested.\n"
msgstr "忽略 %s,它已被安裝且沒有計劃要進行升級。\n"

#: apt-private/private-install.cc
#, c-format
msgid "Reinstallation of %s is not possible, it cannot be downloaded.\n"
msgstr "無法重新安裝 %s,因為它無法下載。\n"

#. TRANSLATORS: First string is package name, second is version
#: apt-private/private-install.cc
#, fuzzy, c-format
msgid "%s is already the newest version (%s).\n"
msgstr "%s 已經是最新版本了。\n"

#: apt-private/private-install.cc cmdline/apt-get.cc cmdline/apt-mark.cc
#, c-format
msgid "%s set to manually installed.\n"
msgstr "%s 被設定為手動安裝。\n"

#: apt-private/private-install.cc
#, fuzzy, c-format
msgid "Selected version '%s' (%s) for '%s'\n"
msgstr "選定的版本為 %3$s 的 %1$s (%2$s)\n"

#: apt-private/private-install.cc
#, fuzzy, c-format
msgid "Selected version '%s' (%s) for '%s' because of '%s'\n"
msgstr "選定的版本為 %3$s 的 %1$s (%2$s)\n"

#: apt-private/private-list.cc
msgid "Listing"
msgstr ""

#: apt-private/private-list.cc
#, c-format
msgid "There is %i additional version. Please use the '-a' switch to see it"
msgid_plural ""
"There are %i additional versions. Please use the '-a' switch to see them."
msgstr[0] ""
msgstr[1] ""

#. TRANSLATORS: placeholder is a binary name like apt or apt-get
#: apt-private/private-main.cc
#, c-format
msgid ""
"NOTE: This is only a simulation!\n"
"      %s needs root privileges for real execution.\n"
"      Keep also in mind that locking is deactivated,\n"
"      so don't depend on the relevance to the real current situation!\n"
msgstr ""

#: apt-private/private-output.cc apt-private/private-show.cc
msgid "unknown"
msgstr ""

#: apt-private/private-output.cc
#, fuzzy, c-format
msgid "[installed,upgradable to: %s]"
msgstr "【已安裝】"

#: apt-private/private-output.cc
#, fuzzy
msgid "[installed,local]"
msgstr "【已安裝】"

#: apt-private/private-output.cc
msgid "[installed,auto-removable]"
msgstr ""

#: apt-private/private-output.cc
#, fuzzy
msgid "[installed,automatic]"
msgstr "【已安裝】"

#: apt-private/private-output.cc
#, fuzzy
msgid "[installed]"
msgstr "【已安裝】"

#: apt-private/private-output.cc
#, c-format
msgid "[upgradable from: %s]"
msgstr ""

#: apt-private/private-output.cc
msgid "[residual-config]"
msgstr ""

#: apt-private/private-output.cc
#, c-format
msgid "but %s is installed"
msgstr "但 %s 卻已安裝"

#: apt-private/private-output.cc
#, c-format
msgid "but %s is to be installed"
msgstr "但 %s 卻將被安裝"

#: apt-private/private-output.cc
msgid "but it is not installable"
msgstr "但它卻無法安裝"

#: apt-private/private-output.cc
msgid "but it is a virtual package"
msgstr "但它是虛擬套件"

#: apt-private/private-output.cc
msgid "but it is not going to be installed"
msgstr "但它卻將不會被安裝"

#: apt-private/private-output.cc
msgid "but it is not installed"
msgstr "但它卻尚未安裝"

#: apt-private/private-output.cc
msgid " or"
msgstr "或"

#: apt-private/private-output.cc
msgid "The following packages have unmet dependencies:"
msgstr "下列的套件有未滿足的相依關係:"

#: apt-private/private-output.cc
msgid "The following NEW packages will be installed:"
msgstr "下列【新】套件將會被安裝:"

#: apt-private/private-output.cc
msgid "The following packages will be REMOVED:"
msgstr "下列套件將會被【移除】:"

#: apt-private/private-output.cc
msgid "The following packages have been kept back:"
msgstr "下列套件將會維持其原有版本:"

#: apt-private/private-output.cc
msgid "The following packages will be upgraded:"
msgstr "下列套件將會被升級:"

#: apt-private/private-output.cc
msgid "The following packages will be DOWNGRADED:"
msgstr "下列套件將會被【降級】:"

#: apt-private/private-output.cc
msgid "The following held packages will be changed:"
msgstr "下列被保留 (hold) 的套件將會被更改:"

#: apt-private/private-output.cc
#, c-format
msgid "%s (due to %s)"
msgstr "%s(因為 %s"

#: apt-private/private-output.cc
msgid ""
"WARNING: The following essential packages will be removed.\n"
"This should NOT be done unless you know exactly what you are doing!"
msgstr ""
"【警告】:下列的基本套件都將被移除。\n"
"除非您很清楚您在做什麼,否則請勿輕易嘗試!"

#: apt-private/private-output.cc
#, c-format
msgid "%lu upgraded, %lu newly installed, "
msgstr "升級 %lu 個,新安裝 %lu 個,"

#: apt-private/private-output.cc
#, c-format
msgid "%lu reinstalled, "
msgstr "重新安裝 %lu 個,"

#: apt-private/private-output.cc
#, c-format
msgid "%lu downgraded, "
msgstr "降級 %lu 個,"

#: apt-private/private-output.cc
#, c-format
msgid "%lu to remove and %lu not upgraded.\n"
msgstr "移除 %lu 個,有 %lu 個未被升級。\n"

#: apt-private/private-output.cc
#, c-format
msgid "%lu not fully installed or removed.\n"
msgstr "%lu 個沒有完整得安裝或移除。\n"

#. TRANSLATOR: Yes/No question help-text: defaulting to Y[es]
#. e.g. "Do you want to continue? [Y/n] "
#. The user has to answer with an input matching the
#. YESEXPR/NOEXPR defined in your l10n.
#: apt-private/private-output.cc
msgid "[Y/n]"
msgstr ""

#. TRANSLATOR: Yes/No question help-text: defaulting to N[o]
#. e.g. "Should this file be removed? [y/N] "
#. The user has to answer with an input matching the
#. YESEXPR/NOEXPR defined in your l10n.
#: apt-private/private-output.cc
msgid "[y/N]"
msgstr ""

#. TRANSLATOR: "Yes" answer printed for a yes/no question if --assume-yes is set
#: apt-private/private-output.cc
msgid "Y"
msgstr ""

#. TRANSLATOR: "No" answer printed for a yes/no question if --assume-no is set
#: apt-private/private-output.cc
msgid "N"
msgstr ""

#: apt-private/private-search.cc
#, fuzzy
msgid "You must give at least one search pattern"
msgstr "您必須明確得給定一個樣式"

#: apt-private/private-search.cc
msgid "Full Text Search"
msgstr ""

#: apt-private/private-show.cc
#, c-format
msgid "There is %i additional record. Please use the '-a' switch to see it"
msgid_plural ""
"There are %i additional records. Please use the '-a' switch to see them."
msgstr[0] ""
msgstr[1] ""

#: apt-private/private-show.cc
msgid "not a real package (virtual)"
msgstr ""

#: apt-private/private-show.cc
msgid "Package files:"
msgstr "套件檔:"

#: apt-private/private-show.cc
msgid "Cache is out of sync, can't x-ref a package file"
msgstr "快取資料未同步,無法 x-ref 套件檔"

#. Show any packages have explicit pins
#: apt-private/private-show.cc
msgid "Pinned packages:"
msgstr "鎖定的套件:"

#. Print the package name and the version we are forcing to
#: apt-private/private-show.cc
#, c-format
msgid "%s -> %s with priority %d\n"
msgstr ""

#: apt-private/private-show.cc
msgid "  Installed: "
msgstr "  已安裝:"

#: apt-private/private-show.cc
msgid "  Candidate: "
msgstr "  候選:"

#: apt-private/private-show.cc
msgid "(none)"
msgstr "(無)"

#. Show the priority tables
#: apt-private/private-show.cc
msgid "  Version table:"
msgstr "  版本列表:"

#: apt-private/private-source.cc
#, fuzzy, c-format
msgid "Can not find a package for architecture '%s'"
msgstr "無法找到套件 %s"

#: apt-private/private-source.cc
#, fuzzy, c-format
msgid "Can not find a package '%s' with version '%s'"
msgstr "無法找到套件 %s"

#: apt-private/private-source.cc
#, fuzzy, c-format
msgid "Can not find a package '%s' with release '%s'"
msgstr "無法找到套件 %s"

#: apt-private/private-source.cc
#, fuzzy, c-format
msgid "Picking '%s' as source package instead of '%s'\n"
msgstr "無法取得來源套件列表 %s 的狀態"

#: apt-private/private-source.cc
#, c-format
msgid "Can not find version '%s' of package '%s'"
msgstr ""

#: apt-private/private-source.cc
msgid "Must specify at least one package to fetch source for"
msgstr "在取得原始碼時必須至少指定一個套件"

#: apt-private/private-source.cc
#, c-format
msgid "Unable to find a source package for %s"
msgstr "無法找到 %s 的原始碼套件"

#: apt-private/private-source.cc
#, c-format
msgid ""
"NOTICE: '%s' packaging is maintained in the '%s' version control system at:\n"
"%s\n"
msgstr ""

#: apt-private/private-source.cc
#, c-format
msgid ""
"Please use:\n"
"%s\n"
"to retrieve the latest (possibly unreleased) updates to the package.\n"
msgstr ""

#: apt-private/private-source.cc
#, c-format
msgid "Skipping already downloaded file '%s'\n"
msgstr "略過已下載的檔案 '%s'\n"

#. TRANSLATOR: The required space between number and unit is already included
#. in the replacement strings, so %sB will be correctly translate in e.g. 1,5 MB
#: apt-private/private-source.cc
#, c-format
msgid "Need to get %sB/%sB of source archives.\n"
msgstr "需要下載 %sB/%sB 的原始套件檔。\n"

#. TRANSLATOR: The required space between number and unit is already included
#. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB
#: apt-private/private-source.cc
#, c-format
msgid "Need to get %sB of source archives.\n"
msgstr "需要下載 %sB 的原始套件檔。\n"

#: apt-private/private-source.cc
#, c-format
msgid "Fetch source %s\n"
msgstr "取得原始碼 %s\n"

#: apt-private/private-source.cc
msgid "Failed to fetch some archives."
msgstr "無法取得某些套件檔。"

#: apt-private/private-source.cc
#, c-format
msgid "Skipping unpack of already unpacked source in %s\n"
msgstr "不解開,因原始碼已解開至 %s\n"

#: apt-private/private-source.cc
#, c-format
msgid "Unpack command '%s' failed.\n"
msgstr "解開指令 '%s' 失敗。\n"

#: apt-private/private-source.cc
msgid "Check if the 'dpkg-dev' package is installed.\n"
msgstr "請檢查是否已安裝了 'dpkg-dev' 套件。\n"

#: apt-private/private-source.cc
#, c-format
msgid "Build command '%s' failed.\n"
msgstr "編譯指令 '%s' 失敗。\n"

#: apt-private/private-source.cc
#, c-format
msgid "Unable to get build-dependency information for %s"
msgstr "無法取得 %s 的編譯相依關係資訊"

#: apt-private/private-source.cc
#, c-format
msgid "%s has no build depends.\n"
msgstr "%s 沒有編譯相依關係。\n"

#: apt-private/private-source.cc
#, c-format
msgid ""
"No architecture information available for %s. See apt.conf(5) APT::"
"Architectures for setup"
msgstr ""

#: apt-private/private-source.cc
msgid "Must specify at least one package to check builddeps for"
msgstr "在檢查編譯相依關係時必須至少指定一個套件"

#: apt-private/private-source.cc
#, c-format
msgid "Note, using directory '%s' to get the build dependencies\n"
msgstr ""

#: apt-private/private-source.cc
#, fuzzy, c-format
msgid "Note, using file '%s' to get the build dependencies\n"
msgstr "無法處理編譯相依關係"

#: apt-private/private-source.cc
msgid "Failed to process build dependencies"
msgstr "無法處理編譯相依關係"

#: apt-private/private-sources.cc
#, fuzzy, c-format
msgid "Failed to parse %s. Edit again? "
msgstr "無法將 %s 更名為 %s"

#: apt-private/private-sources.cc
#, c-format
msgid "Your '%s' file changed, please run 'apt-get update'.\n"
msgstr ""

#: apt-private/private-unmet.cc
#, c-format
msgid "Package %s version %s has an unmet dep:\n"
msgstr "套件 %s 版本 %s 未能滿足相依性:\n"

#: apt-private/private-update.cc
msgid "The update command takes no arguments"
msgstr "update 指令不需任何參數"

#. TRANSLATOR: the first two are manpage references, the last the URI from a sources.list
#: apt-private/private-update.cc
#, c-format
msgid ""
"Usage of %s should be preferred over embedding login information directly in "
"the %s entry for '%s'"
msgstr ""

#: apt-private/private-update.cc
#, c-format
msgid "%i package can be upgraded. Run 'apt list --upgradable' to see it.\n"
msgid_plural ""
"%i packages can be upgraded. Run 'apt list --upgradable' to see them.\n"
msgstr[0] ""
msgstr[1] ""

#: apt-private/private-update.cc
msgid "All packages are up to date."
msgstr ""

#: cmdline/apt-cache.cc
#, fuzzy
msgid "apt-cache stats does not take any arguments"
msgstr "update 指令不需任何參數"

#: cmdline/apt-cache.cc
msgid "Total package names: "
msgstr "套件名稱合計:"

#: cmdline/apt-cache.cc
#, fuzzy
msgid "Total package structures: "
msgstr "套件名稱合計:"

#: cmdline/apt-cache.cc
msgid "  Normal packages: "
msgstr "  一般套件:"

#: cmdline/apt-cache.cc
msgid "  Pure virtual packages: "
msgstr "  完全虛擬套件:"

#: cmdline/apt-cache.cc
msgid "  Single virtual packages: "
msgstr "  單一虛擬套件:"

#: cmdline/apt-cache.cc
msgid "  Mixed virtual packages: "
msgstr "  混合虛擬套件:"

#: cmdline/apt-cache.cc
msgid "  Missing: "
msgstr "  找不到:"

#: cmdline/apt-cache.cc
msgid "Total distinct versions: "
msgstr "個別版本合計:"

#: cmdline/apt-cache.cc
msgid "Total distinct descriptions: "
msgstr "個別版本類別合計:"

#: cmdline/apt-cache.cc
msgid "Total dependencies: "
msgstr "相依關係合計:"

#: cmdline/apt-cache.cc
msgid "Total ver/file relations: "
msgstr "版本/檔案關聯合計:"

#: cmdline/apt-cache.cc
msgid "Total Desc/File relations: "
msgstr "類別/檔案關聯合計:"

#: cmdline/apt-cache.cc
msgid "Total Provides mappings: "
msgstr "提供者對應合計:"

#: cmdline/apt-cache.cc
msgid "Total globbed strings: "
msgstr "所有字串合計:"

#: cmdline/apt-cache.cc
msgid "Total slack space: "
msgstr "間暇空間合計:"

#: cmdline/apt-cache.cc
msgid "Total space accounted for: "
msgstr "統計後的空間合計:"

#: cmdline/apt-cache.cc
msgid "This command is deprecated. Please use 'apt-mark showauto' instead."
msgstr ""

#: cmdline/apt-cache.cc
msgid ""
"Usage: apt-cache [options] command\n"
"       apt-cache [options] show pkg1 [pkg2 ...]\n"
"\n"
"apt-cache queries and displays available information about installed\n"
"and installable packages. It works exclusively on the data acquired\n"
"into the local cache via the 'update' command of e.g. apt-get. The\n"
"displayed information may therefore be outdated if the last update was\n"
"too long ago, but in exchange apt-cache works independently of the\n"
"availability of the configured sources (e.g. offline).\n"
msgstr ""

#: cmdline/apt-cache.cc
msgid "Show source records"
msgstr "顯示原始碼報告"

#: cmdline/apt-cache.cc
msgid "Search the package list for a regex pattern"
msgstr "根據正規表示式搜索套件列表"

#: cmdline/apt-cache.cc
msgid "Show raw dependency information for a package"
msgstr "顯示該套件的原始相依關係的資訊"

#: cmdline/apt-cache.cc
msgid "Show reverse dependency information for a package"
msgstr "顯示所有相依於該套件的套件名稱"

#: cmdline/apt-cache.cc
msgid "Show a readable record for the package"
msgstr "顯示該套件的易於閱讀的報告"

#: cmdline/apt-cache.cc
msgid "List the names of all packages in the system"
msgstr "列出系統中所有套件"

#: cmdline/apt-cache.cc
msgid "Show policy settings"
msgstr "顯示套件的可安裝版本資訊"

#: cmdline/apt-cdrom.cc
#, fuzzy
msgid "Please provide a name for this Disc, such as 'Debian 5.0.3 Disk 1'"
msgstr "請替這張光碟取個名字,像是 'Debian 2.1r1 Disk 1'"

#: cmdline/apt-cdrom.cc
#, fuzzy
msgid "Please insert a Disc in the drive and press [Enter]"
msgstr "請把光碟放入光碟機,然後按下 [Enter] 鍵"

#: cmdline/apt-cdrom.cc
#, fuzzy, c-format
msgid "Failed to mount '%s' to '%s'"
msgstr "無法將 %s 更名為 %s"

#: cmdline/apt-cdrom.cc
msgid ""
"No CD-ROM could be auto-detected or found using the default mount point.\n"
"You may try the --cdrom option to set the CD-ROM mount point.\n"
"See 'man apt-cdrom' for more information about the CD-ROM auto-detection and "
"mount point."
msgstr ""

#: cmdline/apt-cdrom.cc
msgid "Repeat this process for the rest of the CDs in your set."
msgstr "請對您的光碟組中的其它光碟重複相同的操作。"

#: cmdline/apt-cdrom.cc
msgid ""
"Usage: apt-cdrom [options] command\n"
"\n"
"apt-cdrom is used to add CDROM's, USB flashdrives and other removable\n"
"media types as package sources to APT. The mount point and device\n"
"information is taken from apt.conf(5), udev(7) and fstab(5).\n"
msgstr ""

#: cmdline/apt-config.cc
msgid "Arguments not in pairs"
msgstr "參數並未成對"

#: cmdline/apt-config.cc
#, fuzzy
msgid ""
"Usage: apt-config [options] command\n"
"\n"
"apt-config is an interface to the configuration settings used by\n"
"all APT tools, mainly intended for debugging and shell scripting.\n"
msgstr ""
"用法:apt-config [選項] 指令\n"
"\n"
"apt-config 是一個用於讀取 APT 設定檔的簡單工具\n"

#: cmdline/apt-config.cc
msgid "get configuration values via shell evaluation"
msgstr ""

#: cmdline/apt-config.cc
msgid "show the active configuration setting"
msgstr ""

#: cmdline/apt-dump-solver.cc
msgid ""
"Usage: apt-dump-solver\n"
"\n"
"apt-dump-solver is an interface to store an EDSP scenario in\n"
"a file and optionally forwards it to another solver.\n"
msgstr ""

#: cmdline/apt-extracttemplates.cc
#, fuzzy
msgid ""
"Usage: apt-extracttemplates file1 [file2 ...]\n"
"\n"
"apt-extracttemplates is used to extract config and template files\n"
"from debian packages. It is used mainly by debconf(1) to prompt for\n"
"configuration questions before installation of packages.\n"
msgstr ""
"用法:apt-extracttemplates 檔案1 [檔案2 ...]\n"
"\n"
"apt-extracttemplates 是用來從 debian 套件中解壓出設定檔和模板資訊\n"
"的工具\n"
"\n"
"選項\n"
"  -h   本幫助訊息。\n"
"  -t   指定暫存目錄\n"
"  -c=? 讀取指定的設定檔\n"
"  -o=? 指定任意的設定選項,例如:-o dir::cache=/tmp\n"

#: cmdline/apt-extracttemplates.cc
msgid "Cannot get debconf version. Is debconf installed?"
msgstr "無法取得 debconf 版本。是否有安裝 debconf?"

#: cmdline/apt-get.cc
#, c-format
msgid "Couldn't find package %s"
msgstr "無法找到套件 %s"

#: cmdline/apt-get.cc cmdline/apt-mark.cc
#, fuzzy, c-format
msgid "%s set to automatically installed.\n"
msgstr "%s 被設定為手動安裝。\n"

#: cmdline/apt-get.cc cmdline/apt-mark.cc
msgid ""
"This command is deprecated. Please use 'apt-mark auto' and 'apt-mark manual' "
"instead."
msgstr ""

#: cmdline/apt-get.cc
msgid "Internal error, problem resolver broke stuff"
msgstr "內部錯誤,問題排除器造成了損壞"

#: cmdline/apt-get.cc
msgid "Supported modules:"
msgstr "已支援模組:"

#: cmdline/apt-get.cc
#, fuzzy
msgid ""
"Usage: apt-get [options] command\n"
"       apt-get [options] install|remove pkg1 [pkg2 ...]\n"
"       apt-get [options] source pkg1 [pkg2 ...]\n"
"\n"
"apt-get is a command line interface for retrieval of packages\n"
"and information about them from authenticated sources and\n"
"for installation, upgrade and removal of packages together\n"
"with their dependencies.\n"
msgstr ""
"用法:apt-get [選項] 指令\n"
"      apt-get [選項] install|remove 套件1 [套件2 ...]\n"
"      apt-get [選項] source 套件1 [套件2 ...]\n"
"\n"
"apt-get 是一個用來下載和安裝套件的簡易命令列界面。\n"
"最常用指令是 update 和 install。\n"

#: cmdline/apt-get.cc
msgid "Retrieve new lists of packages"
msgstr "取得新的套件列表"

#: cmdline/apt-get.cc
msgid "Perform an upgrade"
msgstr "進行升級"

#: cmdline/apt-get.cc
msgid "Install new packages (pkg is libc6 not libc6.deb)"
msgstr "安裝新套件(套件名稱是 libc6 而不是 libc6.deb)"

#: cmdline/apt-get.cc
msgid "Remove packages"
msgstr "移除套件"

#: cmdline/apt-get.cc
msgid "Remove packages and config files"
msgstr "移除並清除套件"

#: cmdline/apt-get.cc cmdline/apt.cc
msgid "Remove automatically all unused packages"
msgstr "自動移除所有不再使用的套件"

#: cmdline/apt-get.cc
msgid "Distribution upgrade, see apt-get(8)"
msgstr "發行版本升級,請參閱 apt-get(8)"

#: cmdline/apt-get.cc
msgid "Follow dselect selections"
msgstr "採用 dselect 的選項升級"

#: cmdline/apt-get.cc
msgid "Configure build-dependencies for source packages"
msgstr "為原始碼套件配置編譯相依關係"

#: cmdline/apt-get.cc
msgid "Erase downloaded archive files"
msgstr "刪除已下載的套件檔"

#: cmdline/apt-get.cc
msgid "Erase old downloaded archive files"
msgstr "刪除已下載但已有新版本的套件檔"

#: cmdline/apt-get.cc
msgid "Verify that there are no broken dependencies"
msgstr "檢查相依關係是否有問題"

#: cmdline/apt-get.cc
msgid "Download source archives"
msgstr "下載套件原始碼"

#: cmdline/apt-get.cc
msgid "Download the binary package into the current directory"
msgstr ""

#: cmdline/apt-get.cc
msgid "Download and display the changelog for the given package"
msgstr ""

#: cmdline/apt-helper.cc
msgid "Need one URL as argument"
msgstr ""

#: cmdline/apt-helper.cc
#, fuzzy
msgid "Must specify at least one pair url/filename"
msgstr "在取得原始碼時必須至少指定一個套件"

#: cmdline/apt-helper.cc
msgid "Download Failed"
msgstr ""

#: cmdline/apt-helper.cc
#, c-format
msgid "GetSrvRec failed for %s"
msgstr ""

#: cmdline/apt-helper.cc
msgid ""
"Usage: apt-helper [options] command\n"
"       apt-helper [options] cat-file file ...\n"
"       apt-helper [options] download-file uri target-path\n"
"\n"
"apt-helper bundles a variety of commands for shell scripts to use\n"
"e.g. the same proxy configuration or acquire system as APT would.\n"
msgstr ""

#: cmdline/apt-helper.cc
msgid "download the given uri to the target-path"
msgstr ""

#: cmdline/apt-helper.cc
msgid "lookup a SRV record (e.g. _http._tcp.ftp.debian.org)"
msgstr ""

#: cmdline/apt-helper.cc
msgid "concatenate files, with automatic decompression"
msgstr ""

#: cmdline/apt-helper.cc
msgid "detect proxy using apt.conf"
msgstr ""

#: cmdline/apt-helper.cc
msgid "wait for system to be online"
msgstr ""

#: cmdline/apt-helper.cc
msgid "drop privileges before running given command"
msgstr ""

#: cmdline/apt-internal-planner.cc
#, fuzzy
msgid ""
"Usage: apt-internal-planner\n"
"\n"
"apt-internal-planner is an interface to use the current internal\n"
"installation planner for the APT family like an external one,\n"
"for debugging or the like.\n"
msgstr ""
"用法:apt-extracttemplates 檔案1 [檔案2 ...]\n"
"\n"
"apt-extracttemplates 是用來從 debian 套件中解壓出設定檔和模板資訊\n"
"的工具\n"
"\n"
"選項\n"
"  -h   本幫助訊息。\n"
"  -t   指定暫存目錄\n"
"  -c=? 讀取指定的設定檔\n"
"  -o=? 指定任意的設定選項,例如:-o dir::cache=/tmp\n"

#: cmdline/apt-internal-solver.cc
#, fuzzy
msgid ""
"Usage: apt-internal-solver\n"
"\n"
"apt-internal-solver is an interface to use the current internal\n"
"resolver for the APT family like an external one, for debugging or\n"
"the like.\n"
msgstr ""
"用法:apt-extracttemplates 檔案1 [檔案2 ...]\n"
"\n"
"apt-extracttemplates 是用來從 debian 套件中解壓出設定檔和模板資訊\n"
"的工具\n"
"\n"
"選項\n"
"  -h   本幫助訊息。\n"
"  -t   指定暫存目錄\n"
"  -c=? 讀取指定的設定檔\n"
"  -o=? 指定任意的設定選項,例如:-o dir::cache=/tmp\n"

#: cmdline/apt-mark.cc
#, fuzzy, c-format
msgid "%s can not be marked as it is not installed.\n"
msgstr "但它卻尚未安裝"

#: cmdline/apt-mark.cc
#, fuzzy, c-format
msgid "%s was already set to manually installed.\n"
msgstr "%s 被設定為手動安裝。\n"

#: cmdline/apt-mark.cc
#, fuzzy, c-format
msgid "%s was already set to automatically installed.\n"
msgstr "%s 被設定為手動安裝。\n"

#: cmdline/apt-mark.cc
#, fuzzy, c-format
msgid "%s was already set on hold.\n"
msgstr "%s 已經是最新版本了。\n"

#: cmdline/apt-mark.cc
#, fuzzy, c-format
msgid "%s was already not hold.\n"
msgstr "%s 已經是最新版本了。\n"

#: cmdline/apt-mark.cc
msgid "Executing dpkg failed. Are you root?"
msgstr ""

#: cmdline/apt-mark.cc
#, fuzzy, c-format
msgid "%s set on hold.\n"
msgstr "%s 被設定為手動安裝。\n"

#: cmdline/apt-mark.cc
#, fuzzy, c-format
msgid "Canceled hold on %s.\n"
msgstr "無法開啟 %s"

#: cmdline/apt-mark.cc
#, c-format
msgid "Selected %s for purge.\n"
msgstr ""

#: cmdline/apt-mark.cc
#, c-format
msgid "Selected %s for removal.\n"
msgstr ""

#: cmdline/apt-mark.cc
#, c-format
msgid "Selected %s for installation.\n"
msgstr ""

#: cmdline/apt-mark.cc
msgid ""
"Usage: apt-mark [options] {auto|manual} pkg1 [pkg2 ...]\n"
"\n"
"apt-mark is a simple command line interface for marking packages\n"
"as manually or automatically installed. It can also be used to\n"
"manipulate the dpkg(1) selection states of packages, and to list\n"
"all packages with or without a certain marking.\n"
msgstr ""

#: cmdline/apt-mark.cc
#, fuzzy
msgid "Mark the given packages as automatically installed"
msgstr "%s 被設定為手動安裝。\n"

#: cmdline/apt-mark.cc
#, fuzzy
msgid "Mark the given packages as manually installed"
msgstr "請檢查是否已安裝了 'dpkg-dev' 套件。\n"

#: cmdline/apt-mark.cc
msgid "Mark a package as held back"
msgstr ""

#: cmdline/apt-mark.cc
msgid "Unset a package set as held back"
msgstr ""

#: cmdline/apt-mark.cc
#, fuzzy
msgid "Print the list of automatically installed packages"
msgstr "%s 被設定為手動安裝。\n"

#: cmdline/apt-mark.cc
#, fuzzy
msgid "Print the list of manually installed packages"
msgstr "%s 被設定為手動安裝。\n"

#: cmdline/apt-mark.cc
msgid "Print the list of packages on hold"
msgstr ""

#: cmdline/apt-sortpkgs.cc
msgid "Unknown package record!"
msgstr "未知的套件記錄!"

#: cmdline/apt-sortpkgs.cc
msgid ""
"Usage: apt-sortpkgs [options] file1 [file2 ...]\n"
"\n"
"apt-sortpkgs is a simple tool to sort package information files.\n"
"By default it sorts by binary package information, but the -s option\n"
"can be used to switch to source package ordering instead.\n"
msgstr ""

#: cmdline/apt.cc
msgid ""
"Usage: apt [options] command\n"
"\n"
"apt is a commandline package manager and provides commands for\n"
"searching and managing as well as querying information about packages.\n"
"It provides the same functionality as the specialized APT tools,\n"
"like apt-get and apt-cache, but enables options more suitable for\n"
"interactive use by default.\n"
msgstr ""

#. query
#: cmdline/apt.cc
msgid "list packages based on package names"
msgstr ""

#: cmdline/apt.cc
#, fuzzy
msgid "search in package descriptions"
msgstr "正在讀取套件清單"

#: cmdline/apt.cc
msgid "show package details"
msgstr ""

#. package stuff
#: cmdline/apt.cc
#, fuzzy
msgid "install packages"
msgstr "鎖定的套件:"

#: cmdline/apt.cc
#, fuzzy
msgid "remove packages"
msgstr "損毀的套件"

#. system wide stuff
#: cmdline/apt.cc
#, fuzzy
msgid "update list of available packages"
msgstr "%s 被設定為手動安裝。\n"

#: cmdline/apt.cc
msgid "upgrade the system by installing/upgrading packages"
msgstr ""

#: cmdline/apt.cc
msgid "upgrade the system by removing/installing/upgrading packages"
msgstr ""

#. misc
#: cmdline/apt.cc
#, fuzzy
msgid "edit the source information file"
msgstr "正在讀取狀態資料"

#: dselect/install
msgid "Bad default setting!"
msgstr "錯誤的預設設定!"

#: dselect/install dselect/update
#, fuzzy
msgid "Press [Enter] to continue."
msgstr "請按 [Enter] 鍵以繼續進行。"

#: dselect/install
msgid "Do you want to erase any previously downloaded .deb files?"
msgstr "您想移除所有先前下載的 .deb 檔嗎?"

#: dselect/install
#, fuzzy
msgid "Some errors occurred while unpacking. Packages that were installed"
msgstr "在解開套件時發生錯誤。我要準備設定"

#: dselect/install
#, fuzzy
msgid "will be configured. This may result in duplicate errors"
msgstr "套件已安裝過。這會造成重複錯誤"

#: dselect/install
msgid "or errors caused by missing dependencies. This is OK, only the errors"
msgstr "或是因為沒有相依關係而造成錯誤。那麼這個錯誤是無關緊要的"

#: dselect/install
msgid ""
"above this message are important. Please fix them and run [I]nstall again"
msgstr "以上的訊息相當重要。請修正它們並重新執行安裝[I]"

#: dselect/update
msgid "Merging available information"
msgstr "整合現有的資料"

#: ftparchive/apt-ftparchive.cc
msgid "Package extension list is too long"
msgstr "套件延伸列表過長"

#: ftparchive/apt-ftparchive.cc
#, c-format
msgid "Error processing directory %s"
msgstr "處理目錄 %s 時發生錯誤"

#: ftparchive/apt-ftparchive.cc
msgid "Source extension list is too long"
msgstr "原始碼的延伸列表太長"

#: ftparchive/apt-ftparchive.cc
msgid "Error writing header to contents file"
msgstr "寫入標頭資訊到內容檔時發生錯誤"

#: ftparchive/apt-ftparchive.cc
#, c-format
msgid "Error processing contents %s"
msgstr "處理內容 %s 時發生錯誤"

#: ftparchive/apt-ftparchive.cc
msgid ""
"Usage: apt-ftparchive [options] command\n"
"Commands: packages binarypath [overridefile [pathprefix]]\n"
"          sources srcpath [overridefile [pathprefix]]\n"
"          contents path\n"
"          release path\n"
"          generate config [groups]\n"
"          clean config\n"
"\n"
"apt-ftparchive generates index files for Debian archives. It supports\n"
"many styles of generation from fully automated to functional replacements\n"
"for dpkg-scanpackages and dpkg-scansources\n"
"\n"
"apt-ftparchive generates Package files from a tree of .debs. The\n"
"Package file contains the contents of all the control fields from\n"
"each package as well as the MD5 hash and filesize. An override file\n"
"is supported to force the value of Priority and Section.\n"
"\n"
"Similarly apt-ftparchive generates Sources files from a tree of .dscs.\n"
"The --source-override option can be used to specify a src override file\n"
"\n"
"The 'packages' and 'sources' command should be run in the root of the\n"
"tree. BinaryPath should point to the base of the recursive search and \n"
"override file should contain the override flags. Pathprefix is\n"
"appended to the filename fields if present. Example usage from the \n"
"Debian archive:\n"
"   apt-ftparchive packages dists/potato/main/binary-i386/ > \\\n"
"               dists/potato/main/binary-i386/Packages\n"
"\n"
"Options:\n"
"  -h    This help text\n"
"  --md5 Control MD5 generation\n"
"  -s=?  Source override file\n"
"  -q    Quiet\n"
"  -d=?  Select the optional caching database\n"
"  --no-delink Enable delinking debug mode\n"
"  --contents  Control contents file generation\n"
"  -c=?  Read this configuration file\n"
"  -o=?  Set an arbitrary configuration option"
msgstr ""
"用法:apt-ftparchive [選項] 指令\n"
"指令:packages 二進制檔搜索路徑 [重新定義檔 [路徑前綴]]\n"
"      sources 原始碼搜索路徑 [重新定義檔 [路徑前綴]]\n"
"      contents 搜索路徑\n"
"      release 搜索路徑\n"
"      generate 設定檔 [群組]\n"
"      clean 設定檔\n"
"\n"
"apt-ftparchive 可用來替 Debian 套件庫建立索引檔。它支援了從全\n"
"自動化到足以替代 dpkg-scanpackages 及 dpkg-scansources 所提供\n"
"的所有功能等等各式各樣建立索引的方式。apt-ftparchive 會根據 .deb 檔案樹建立 "
"Package 檔。Package 檔\n"
"裡不僅包含了每個套件的 control 資料的內容,還包含了 MD5 檢驗\n"
"碼和檔案大小。它還支援了重新定義檔,可用來強制指定優先等級及\n"
"其所屬的類別。\n"
"\n"
"而同樣的,apt-ftparchive 也能根據 .dsc 檔案樹生成 Source 檔。\n"
"可用 --source-override 選項來指定一個 src 重新定義檔。\n"
"\n"
"應當在檔案樹的根目錄下執行 'packages' 和 'source' 指令。\n"
"二進制檔的搜索路徑必須指向遞迴搜索的底層,且在重新定義檔裡必\n"
"須包含 override 旗標。若指定了路徑前綴時,則會被附加到檔案名\n"
"稱這個欄位裡。以 Debian 套件庫為例:\n"
"   apt-ftparchive packages dists/potato/main/binary-i386/ > \\\n"
"               dists/potato/main/binary-i386/Packages\n"
"\n"
"選項:\n"
"  -h    本幫助說明\n"
"  --md5 控制如何產生 MD5 檢驗碼\n"
"  -s=?  原始碼的重新定義檔\n"
"  -q    安靜模式\n"
"  -d=?  指定搭配的快取資料庫\n"
"  --no-delink 啟用 DeLinking 模式\n"
"  --contents  產生控制內容檔\n"
"  -c=?  讀取指定的設定檔\n"
"  -o=?  指定任意的設定選項"

#: ftparchive/apt-ftparchive.cc
msgid "No selections matched"
msgstr "找不到符合的選項"

#: ftparchive/apt-ftparchive.cc
#, c-format
msgid "Some files are missing in the package file group `%s'"
msgstr "套件檔案組 `%s' 少了部份檔案"

#: ftparchive/cachedb.cc
#, c-format
msgid "DB was corrupted, file renamed to %s.old"
msgstr "DB 已損毀,檔案被更名為 %s.old"

#: ftparchive/cachedb.cc
#, c-format
msgid "DB is old, attempting to upgrade %s"
msgstr "DB 過舊,嘗試升級 %s"

#: ftparchive/cachedb.cc
#, fuzzy
msgid ""
"DB format is invalid. If you upgraded from an older version of apt, please "
"remove and re-create the database."
msgstr ""
"資料庫格式不正確。如果您是由舊版的 apt 升級上來的,請移除並重新建立資料庫。"

#: ftparchive/cachedb.cc
#, c-format
msgid "Unable to open DB file %s: %s"
msgstr "無法開啟 DB 檔 %s: %s"

#: ftparchive/cachedb.cc
#, fuzzy
msgid "Failed to read .dsc"
msgstr "無法讀取連結 %s"

#: ftparchive/cachedb.cc
msgid "Archive has no control record"
msgstr "套件檔沒有 control 記錄"

#: ftparchive/cachedb.cc
msgid "Unable to get a cursor"
msgstr "無法取得遊標"

#: ftparchive/contents.cc
msgid "realloc - Failed to allocate memory"
msgstr "realloc - 無法配置記憶體"

#: ftparchive/multicompress.cc
#, c-format
msgid "Unknown compression algorithm '%s'"
msgstr "未知的壓縮演算法 '%s'"

#: ftparchive/multicompress.cc
#, c-format
msgid "Compressed output %s needs a compression set"
msgstr "要壓縮輸出 %s 需搭配壓縮動作"

#: ftparchive/multicompress.cc methods/rsh.cc
msgid "Failed to create IPC pipe to subprocess"
msgstr "無法和子程序建立 IPC 管線"

#: ftparchive/multicompress.cc
msgid "Failed to fork"
msgstr "fork 時失敗"

#: ftparchive/multicompress.cc
msgid "Compress child"
msgstr "壓縮子程序"

#: ftparchive/multicompress.cc
#, c-format
msgid "Internal error, failed to create %s"
msgstr "內部錯誤,無法建立 %s"

#: ftparchive/multicompress.cc
msgid "IO to subprocess/file failed"
msgstr "和子程序/檔案 IO 失敗"

#: ftparchive/multicompress.cc
msgid "Failed to read while computing MD5"
msgstr "在計算 MD5 時無法讀取到資料"

#: ftparchive/override.cc
#, c-format
msgid "Unable to open %s"
msgstr "無法開啟 %s"

#. skip spaces
#. find end of word
#: ftparchive/override.cc
#, fuzzy, c-format
msgid "Malformed override %s line %llu (%s)"
msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #1"

#: ftparchive/override.cc
#, c-format
msgid "Failed to read the override file %s"
msgstr "無法讀取重新定義檔 %s"

#: ftparchive/override.cc
#, fuzzy, c-format
msgid "Malformed override %s line %llu #1"
msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #1"

#: ftparchive/override.cc
#, fuzzy, c-format
msgid "Malformed override %s line %llu #2"
msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #2"

#: ftparchive/override.cc
#, fuzzy, c-format
msgid "Malformed override %s line %llu #3"
msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #3"

#: ftparchive/writer.cc
#, c-format
msgid "W: Unable to read directory %s\n"
msgstr "警告:無法讀取目錄 %s\n"

#: ftparchive/writer.cc
#, c-format
msgid "W: Unable to stat %s\n"
msgstr "警告:無法取得 %s 狀態\n"

#: ftparchive/writer.cc
msgid "E: "
msgstr "錯誤:"

#: ftparchive/writer.cc
msgid "W: "
msgstr "警告:"

#: ftparchive/writer.cc
msgid "E: Errors apply to file "
msgstr "錯誤:套用到檔案時發生錯誤"

#: ftparchive/writer.cc
#, c-format
msgid "Failed to resolve %s"
msgstr "無法解析 %s"

#: ftparchive/writer.cc
msgid "Tree walking failed"
msgstr "無法走訪目錄樹"

#: ftparchive/writer.cc
#, c-format
msgid "Failed to open %s"
msgstr "無法開啟 %s"

#: ftparchive/writer.cc
#, c-format
msgid " DeLink %s [%s]\n"
msgstr " DeLink %s [%s]\n"

#: ftparchive/writer.cc
#, c-format
msgid "*** Failed to link %s to %s"
msgstr "*** 無法將 %s 連結到 %s"

#: ftparchive/writer.cc
#, c-format
msgid " DeLink limit of %sB hit.\n"
msgstr " 達到了 DeLink 的上限 %sB。\n"

#: ftparchive/writer.cc
msgid "Archive had no package field"
msgstr "套件檔裡沒有套件資訊"

#: ftparchive/writer.cc
#, c-format
msgid "  %s has no override entry\n"
msgstr "  %s 沒有重新定義項目\n"

#: ftparchive/writer.cc
#, c-format
msgid "  %s maintainer is %s not %s\n"
msgstr "  %s 的維護者是 %s,而非 %s\n"

#: ftparchive/writer.cc
#, c-format
msgid "  %s has no source override entry\n"
msgstr "  %s 沒有原始碼重新定義項目\n"

#: ftparchive/writer.cc
#, c-format
msgid "  %s has no binary override entry either\n"
msgstr "  %s 也沒有二元碼重新定義項目\n"

#: methods/basehttp.cc
msgid "Waiting for headers"
msgstr "等待標頭"

#: methods/basehttp.cc
msgid "The HTTP server sent an invalid reply header"
msgstr "HTTP 伺服器傳送了一個無效的回覆標頭"

#: methods/basehttp.cc
msgid "Bad header line"
msgstr "標頭行錯誤"

#: methods/basehttp.cc
msgid "The HTTP server sent an invalid Content-Length header"
msgstr "HTTP 伺服器傳送了一個無效的 Content-Length 標頭"

#: methods/basehttp.cc
msgid "The HTTP server sent an invalid Content-Range header"
msgstr "HTTP 伺服器傳送了一個無效的 Content-Range 標頭"

#: methods/basehttp.cc
msgid "This HTTP server has broken range support"
msgstr "這個 HTTP 伺服器的範圍支援有問題"

#: methods/basehttp.cc
msgid "Unknown date format"
msgstr "未知的資料格式"

#: methods/basehttp.cc
msgid "Bad header data"
msgstr "錯誤的標頭資料"

#: methods/basehttp.cc
msgid "Connection failed"
msgstr "連線失敗"

#: methods/basehttp.cc methods/ftp.cc methods/http.cc
#, c-format
msgid "File has unexpected size (%llu != %llu). Mirror sync in progress?"
msgstr ""

#: methods/basehttp.cc
#, c-format
msgid ""
"Automatically disabled %s due to incorrect response from server/proxy. (man "
"5 apt.conf)"
msgstr ""

#: methods/basehttp.cc
msgid "Internal error"
msgstr "內部錯誤"

#: methods/cdrom.cc
#, c-format
msgid "Unable to read the cdrom database %s"
msgstr "無法讀取光碟片資料庫 %s"

#: methods/cdrom.cc
msgid ""
"Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update "
"cannot be used to add new CD-ROMs"
msgstr ""
"請用 apt-cdrom 來讓 APT 能辨識這張光碟。apt-get update 是不能用來新增光碟的"

#: methods/cdrom.cc
msgid "Wrong CD-ROM"
msgstr "不正確的光碟"

#: methods/cdrom.cc
#, c-format
msgid "Unable to unmount the CD-ROM in %s, it may still be in use."
msgstr "無法卸載 %s 裡的光碟片,或許它仍在使用中。"

#: methods/cdrom.cc
msgid "Disk not found."
msgstr "找不到磁碟。"

#: methods/cdrom.cc methods/file.cc methods/rsh.cc
msgid "File not found"
msgstr "找不到檔案"

#. TRANSLATOR: %s is e.g. Tor's ".onion" which would likely fail or leak info (RFC7686)
#: methods/connect.cc
#, c-format
msgid "Direct connection to %s domains is blocked by default."
msgstr ""

#: methods/connect.cc
#, c-format
msgid "[IP: %s %s]"
msgstr "[IP: %s %s]"

#: methods/connect.cc
#, fuzzy, c-format
#| msgid "Connecting to %s (%s)"
msgid "Connected to %s (%s)"
msgstr "正和 %s (%s) 連線"

#: methods/connect.cc methods/http.cc
#, c-format
msgid "Connecting to %s (%s)"
msgstr "正和 %s (%s) 連線"

#: methods/connect.cc
#, c-format
msgid "Could not create a socket for %s (f=%u t=%u p=%u)"
msgstr "無法建立 socket 指向 %s (f=%u t=%u p=%u)"

#: methods/connect.cc
#, c-format
msgid "Cannot initiate the connection to %s:%s (%s)."
msgstr "無法初始和 %s:%s (%s) 的連線。"

#: methods/connect.cc methods/ftp.cc methods/rsh.cc
msgid "Failed"
msgstr "失敗"

#: methods/connect.cc
#, c-format
msgid "Could not connect to %s:%s (%s)."
msgstr "無法和 %s:%s (%s) 連線。"

#: methods/connect.cc
#, c-format
msgid "Could not connect to %s:%s (%s), connection timed out"
msgstr "無法和 %s:%s (%s) 連線,連線逾時"

#. We say this mainly because the pause here is for the
#. ssh connection that is still going
#: methods/connect.cc methods/rsh.cc
#, c-format
msgid "Connecting to %s"
msgstr "正連線至 %s"

#: methods/connect.cc
#, c-format
msgid "Could not resolve '%s'"
msgstr "無法解析 '%s'"

#: methods/connect.cc
#, c-format
msgid "Temporary failure resolving '%s'"
msgstr "暫時無法解析 '%s'"

#: methods/connect.cc
#, fuzzy, c-format
msgid "System error resolving '%s:%s'"
msgstr "在解析 '%s:%s' (%i) 時出了怪事"

#: methods/connect.cc
#, fuzzy, c-format
msgid "Something wicked happened resolving '%s:%s' (%i - %s)"
msgstr "在解析 '%s:%s' (%i) 時出了怪事"

#: methods/connect.cc
#, fuzzy, c-format
msgid "Unable to connect to %s:%s:"
msgstr "無法連線至 %s %s:"

#: methods/copy.cc
msgid "Failed to stat"
msgstr "無法取得狀態"

#: methods/file.cc
msgid "Invalid URI, local URIS must not start with //"
msgstr "不正確的 URI,本機 URI 不應以 // 開頭"

#. Login must be before getpeername otherwise dante won't work.
#: methods/ftp.cc
msgid "Logging in"
msgstr "登入中"

#: methods/ftp.cc
msgid "Unable to determine the peer name"
msgstr "無法解析對方主機名稱"

#: methods/ftp.cc
msgid "Unable to determine the local name"
msgstr "無法解析本機名稱"

#: methods/ftp.cc
#, c-format
msgid "The server refused the connection and said: %s"
msgstr "伺服器不接受連線,並回應:%s"

#: methods/ftp.cc
#, c-format
msgid "USER failed, server said: %s"
msgstr "USER 指令失敗,伺服器回應:%s"

#: methods/ftp.cc
#, c-format
msgid "PASS failed, server said: %s"
msgstr "PASS 指令失敗,伺服器回應:%s"

#: methods/ftp.cc
msgid ""
"A proxy server was specified but no login script, Acquire::ftp::ProxyLogin "
"is empty."
msgstr ""
"指定了代理伺服器,但沒有指定登入 script,Acquire::ftp::ProxyLogin 是空的。"

#: methods/ftp.cc
#, c-format
msgid "Login script command '%s' failed, server said: %s"
msgstr "登入 script 指令 '%s' 失敗,伺服器回應:%s"

#: methods/ftp.cc
#, c-format
msgid "TYPE failed, server said: %s"
msgstr "TYPE 指令失敗,伺服器回應:%s"

#: methods/ftp.cc methods/rsh.cc
msgid "Connection timeout"
msgstr "連線逾時"

#: methods/ftp.cc
msgid "Server closed the connection"
msgstr "伺服器已關閉連線"

#: methods/ftp.cc methods/rsh.cc
msgid "A response overflowed the buffer."
msgstr "回應超過緩衝區長度。"

#: methods/ftp.cc
msgid "Protocol corruption"
msgstr "協定失敗"

#: methods/ftp.cc
msgid "Could not create a socket"
msgstr "無法建立 Socket"

#: methods/ftp.cc
msgid "Could not connect data socket, connection timed out"
msgstr "無法和 data socket 連線,連線逾時"

#: methods/ftp.cc
msgid "Could not connect passive socket."
msgstr "無法和 passive socket 連線。"

#: methods/ftp.cc
msgid "getaddrinfo was unable to get a listening socket"
msgstr "getaddrinfo 無法取得監聽 socket"

#: methods/ftp.cc
msgid "Could not bind a socket"
msgstr "無法 bind 至 socket"

#: methods/ftp.cc
msgid "Could not listen on the socket"
msgstr "無法監聽 socket"

#: methods/ftp.cc
msgid "Could not determine the socket's name"
msgstr "無法解析 socket 名稱"

#: methods/ftp.cc
msgid "Unable to send PORT command"
msgstr "無法送出 PORT 指令"

#: methods/ftp.cc
#, c-format
msgid "Unknown address family %u (AF_*)"
msgstr "未知的地址家族 %u (AF_*)"

#: methods/ftp.cc
#, c-format
msgid "EPRT failed, server said: %s"
msgstr "EPRT 指令失敗,伺服器回應:%s"

#: methods/ftp.cc
msgid "Data socket connect timed out"
msgstr "Data socket 連線逾時"

#: methods/ftp.cc
msgid "Unable to accept connection"
msgstr "無法接受連線"

#: methods/ftp.cc methods/http.cc methods/rsh.cc
msgid "Problem hashing file"
msgstr "有問題的雜湊檔"

#: methods/ftp.cc
#, c-format
msgid "Unable to fetch file, server said '%s'"
msgstr "無法取得檔案,伺服器回應 '%s'"

#: methods/ftp.cc methods/rsh.cc
msgid "Data socket timed out"
msgstr "Data socket 連線逾時"

#: methods/ftp.cc
#, c-format
msgid "Data transfer failed, server said '%s'"
msgstr "資料傳輸失敗,伺服器回應 '%s'"

#. Get the files information
#: methods/ftp.cc
msgid "Query"
msgstr "查詢"

#: methods/ftp.cc
msgid "Unable to invoke "
msgstr "無法 invoke "

#. TRANSLATORS: %s is a single techy word like 'NODATA'
#: methods/gpgv.cc
#, c-format
msgid ""
"Signed file isn't valid, got '%s' (does the network require authentication?)"
msgstr ""

#: methods/gpgv.cc
msgid "At least one invalid signature was encountered."
msgstr "至少發現一個無效的簽章。"

#: methods/gpgv.cc
msgid ""
"Internal error: Good signature, but could not determine key fingerprint?!"
msgstr "內部錯誤:簽章無誤,但卻無法辨識密鑰的指紋碼?!"

#: methods/gpgv.cc
#, fuzzy
msgid "Could not execute 'apt-key' to verify signature (is gnupg installed?)"
msgstr "無法執行 '%s' 來驗證簽章(gnupg 是否安裝了?)"

#: methods/gpgv.cc
msgid "Unknown error executing apt-key"
msgstr "在執行 apt-key 時發生未知的錯誤"

#. TRANSLATORS: The second %s is the reason and is untranslated for repository owners.
#: methods/gpgv.cc
#, c-format
msgid "Signature by key %s uses weak digest algorithm (%s)"
msgstr ""

#: methods/gpgv.cc
msgid "The following signatures were invalid:\n"
msgstr "以下簽名無效:\n"

#: methods/gpgv.cc
msgid ""
"The following signatures couldn't be verified because the public key is not "
"available:\n"
msgstr "由於無法取得它們的公鑰,以下簽章無法進行驗證:\n"

#: methods/http.cc
msgid "Error writing to the file"
msgstr "在寫入該檔時發生錯誤"

#: methods/http.cc
msgid "Error reading from server. Remote end closed connection"
msgstr "在讀取伺服器時發生錯誤,遠端主機已關閉連線"

#: methods/http.cc
msgid "Error reading from server"
msgstr "在讀取伺服器時發生錯誤"

#: methods/http.cc
msgid "Error writing to file"
msgstr "在寫入檔案時發生錯誤"

#: methods/http.cc
msgid "Select failed"
msgstr "選擇失敗"

#: methods/http.cc
msgid "Connection timed out"
msgstr "連線逾時"

#: methods/http.cc
msgid "Error writing to output file"
msgstr "在寫入輸出檔時發生錯誤"

#: methods/rred.cc
msgid "Failed to set modification time"
msgstr "無法設定修改時間"

#: methods/rsh.cc
msgid "Connection closed prematurely"
msgstr "連線突然終止"

#: methods/store.cc
msgid "Empty files can't be valid archives"
msgstr ""

#~ msgid "Removed %s"
#~ msgstr "已移除 %s"

#~ msgid "Package file %s is out of sync."
#~ msgstr "套件檔 %s 未同步。"

#~ msgid ""
#~ "The package index files are corrupted. No Filename: field for package %s."
#~ msgstr "這個套件的索引檔損壞了。沒有套件 %s 的 Filename: 欄位。"

#, fuzzy
#~ msgid "Can not read mirror file '%s'"
#~ msgstr "無法開啟檔案 %s"

#, fuzzy
#~ msgid "No entry found in mirror file '%s'"
#~ msgstr "無法開啟檔案 %s"

#~ msgid "Opening configuration file %s"
#~ msgstr "開啟設定檔 %s"

#~ msgid "Opening %s"
#~ msgstr "正在開啟 %s"

#~ msgid "Unmet dependencies. Try using --fix-broken."
#~ msgstr "未能滿足相依關係。試試 --fix-broken 選項。"

#~ msgid "You might want to run 'apt --fix-broken install' to correct these:"
#~ msgstr "您也許得執行 'apt --fix-broken install' 以修正這些問題:"

#~ msgid "(not found)"
#~ msgstr "(未找到)"

#~ msgid "  Package pin: "
#~ msgstr "  套件鎖定:"

#~ msgid "There is no public key available for the following key IDs:\n"
#~ msgstr "無法取得以下的密鑰 ID 的公鑰:\n"

#, fuzzy
#~ msgid "The repository is insufficiently signed by key %s (%s)"
#~ msgstr "路徑 %s 已被抽換"

#, fuzzy
#~ msgid ""
#~ "%s dependency for %s can't be satisfied because %s is not allowed on '%s' "
#~ "packages"
#~ msgstr "無法滿足 %2$s 所要求的 %1$s 相依關係,因為找不到套件 %3$s"

#~ msgid ""
#~ "%s dependency for %s cannot be satisfied because the package %s cannot be "
#~ "found"
#~ msgstr "無法滿足 %2$s 所要求的 %1$s 相依關係,因為找不到套件 %3$s"

#~ msgid ""
#~ "Failed to satisfy %s dependency for %s: Installed package %s is too new"
#~ msgstr "無法滿足 %2$s 的相依關係 %1$s:已安裝的套件 %3$s 太新了"

#, fuzzy
#~ msgid ""
#~ "%s dependency for %s cannot be satisfied because candidate version of "
#~ "package %s can't satisfy version requirements"
#~ msgstr ""
#~ "無法滿足 %2$s 所要求的 %1$s 相依關係,因為套件 %3$s 沒有版本符合其版本需求"

#, fuzzy
#~ msgid ""
#~ "%s dependency for %s cannot be satisfied because package %s has no "
#~ "candidate version"
#~ msgstr "無法滿足 %2$s 所要求的 %1$s 相依關係,因為找不到套件 %3$s"

#~ msgid "Failed to satisfy %s dependency for %s: %s"
#~ msgstr "無法滿足 %2$s 的相依關係 %1$s:%3$s"

#~ msgid "Build-dependencies for %s could not be satisfied."
#~ msgstr "無法滿足套件 %s 的編譯相依關係。"

#~ msgid "Problem unlinking %s"
#~ msgstr "在取消 %s 的連結時發生問題"

#~ msgid "Failed to unlink %s"
#~ msgstr "無法移除連結 %s"

#~ msgid ""
#~ "Usage: apt-cache [options] command\n"
#~ "       apt-cache [options] show pkg1 [pkg2 ...]\n"
#~ "\n"
#~ "apt-cache is a low-level tool used to query information\n"
#~ "from APT's binary cache files\n"
#~ msgstr ""
#~ "用法:apt-cache [選項] 指令\n"
#~ "      apt-cache [選項] show 套件1 [套件2 ...]\n"
#~ "\n"
#~ "apt-cache 是一個低階的工具,可用來操作 APT 的二進制快取檔,也可用來\n"
#~ "查詢那些檔案中的相關訊息\n"

#~ msgid ""
#~ "Options:\n"
#~ "  -h   This help text.\n"
#~ "  -p=? The package cache.\n"
#~ "  -s=? The source cache.\n"
#~ "  -q   Disable progress indicator.\n"
#~ "  -i   Show only important deps for the unmet command.\n"
#~ "  -c=? Read this configuration file\n"
#~ "  -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
#~ "See the apt-cache(8) and apt.conf(5) manual pages for more information.\n"
#~ msgstr ""
#~ "選項:\n"
#~ "  -h   本幫助訊息。\n"
#~ "  -p=? 套件的快取。\n"
#~ "  -s=? 原始碼的快取。\n"
#~ "  -q   關閉進度顯示。\n"
#~ "  -i   僅為 unmet 指令顯示重要的相依關係。\n"
#~ "  -c=? 讀取指定的設定檔\n"
#~ "  -o=? 指定任意的設定選項,例如:-o dir::cache=/tmp\n"
#~ "請參閱 apt-cache(8) 及 apt.conf(5) 參考手冊以取得更多資訊。\n"

#~ msgid ""
#~ "Options:\n"
#~ "  -h   This help text.\n"
#~ "  -c=? Read this configuration file\n"
#~ "  -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
#~ msgstr ""
#~ "選項:\n"
#~ "  -h   本幫助訊息。\n"
#~ "  -c=? 讀取指定的設定檔\n"
#~ "  -o=? 指定任意的設定選項,例如:-o dir::cache=/tmp\n"

#~ msgid ""
#~ "Usage: apt-sortpkgs [options] file1 [file2 ...]\n"
#~ "\n"
#~ "apt-sortpkgs is a simple tool to sort package files. The -s option is "
#~ "used\n"
#~ "to indicate what kind of file it is.\n"
#~ "\n"
#~ "Options:\n"
#~ "  -h   This help text\n"
#~ "  -s   Use source file sorting\n"
#~ "  -c=? Read this configuration file\n"
#~ "  -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
#~ msgstr ""
#~ "用法:apt-sortpkgs [選項] 檔案1 [檔案2 ...]\n"
#~ "\n"
#~ "apt-sortpkgs 是用來排序套件檔的簡單工具。-s 選項是用來指定它的檔案類型。\n"
#~ "\n"
#~ "選項:\n"
#~ "  -h   本幫助訊息。\n"
#~ "  -s   根據原始檔排序\n"
#~ "  -c=? 讀取指定的設定檔\n"
#~ "  -o=? 指定任意的設定選項,例如:-o dir::cache=/tmp\n"

#~ msgid "Child process failed"
#~ msgstr "子程序失敗"

#, fuzzy
#~ msgid "Must specifc at least one srv record"
#~ msgstr "在取得原始碼時必須至少指定一個套件"

#~ msgid "Failed to create pipes"
#~ msgstr "無法建立管線"

#~ msgid "Failed to exec gzip "
#~ msgstr "無法執行 gzip"

#~ msgid "%s %s for %s compiled on %s %s\n"
#~ msgstr "%s %s 是用於 %s 並在 %s %s 上編譯的\n"

#~ msgid "Failed to create FILE*"
#~ msgstr "無法建立 FILE*"

#, fuzzy
#~ msgid "Malformed stanza %u in source list %s (URI parse)"
#~ msgstr "來源列表 %2$s 中的 %1$lu 行的格式錯誤(URI 分析)"

#, fuzzy
#~ msgid "Malformed line %lu in source list %s ([option] unparseable)"
#~ msgstr "來源列表 %2$s 中的 %1$lu 行的格式錯誤(發行版分析)"

#, fuzzy
#~ msgid "Malformed line %lu in source list %s ([option] too short)"
#~ msgstr "來源列表 %2$s 中的 %1$lu 行的格式錯誤(發行版)"

#, fuzzy
#~ msgid "Malformed line %lu in source list %s ([%s] is not an assignment)"
#~ msgstr "來源列表 %2$s 中的 %1$lu 行的格式錯誤(發行版分析)"

#, fuzzy
#~ msgid "Malformed line %lu in source list %s ([%s] has no key)"
#~ msgstr "來源列表 %2$s 中的 %1$lu 行的格式錯誤(發行版分析)"

#, fuzzy
#~ msgid "Malformed line %lu in source list %s ([%s] key %s has no value)"
#~ msgstr "來源列表 %2$s 中的 %1$lu 行的格式錯誤(發行版分析)"

#~ msgid "Malformed line %lu in source list %s (URI)"
#~ msgstr "來源列表 %2$s 中的 %1$lu 行的格式錯誤 (URI)"

#~ msgid "Malformed line %lu in source list %s (dist)"
#~ msgstr "來源列表 %2$s 中的 %1$lu 行的格式錯誤(發行版)"

#~ msgid "Malformed line %lu in source list %s (URI parse)"
#~ msgstr "來源列表 %2$s 中的 %1$lu 行的格式錯誤(URI 分析)"

#~ msgid "Malformed line %lu in source list %s (absolute dist)"
#~ msgstr "來源列表 %2$s 中的 %1$lu 行的格式錯誤(絕對發行版)"

#~ msgid "Malformed line %lu in source list %s (dist parse)"
#~ msgstr "來源列表 %2$s 中的 %1$lu 行的格式錯誤(發行版分析)"

#~ msgid "Package %s %s was not found while processing file dependencies"
#~ msgstr "在計算檔案相依性時找不到套件 %s %s"

#~ msgid "Couldn't stat source package list %s"
#~ msgstr "無法取得來源套件列表 %s 的狀態"

#~ msgid "Collecting File Provides"
#~ msgstr "正在收集檔案提供者"

#, fuzzy
#~ msgid "Unable to find hash sum for '%s' in Release file"
#~ msgstr "無法辨別 Release 檔 %s"

#~ msgid "Vendor block %s contains no fingerprint"
#~ msgstr "提供者區塊 %s 沒有包含指紋碼"

#~ msgid "Total dependency version space: "
#~ msgstr "相依版本空間合計:"

#~ msgid "You don't have enough free space in %s"
#~ msgstr "在 %s 裡沒有足夠的的未使用空間"

#~ msgid "Done"
#~ msgstr "完成"

#, fuzzy
#~ msgid "No keyring installed in %s."
#~ msgstr "放棄安裝。"

#, fuzzy
#~ msgid "Internal error, Upgrade broke stuff"
#~ msgstr "內部錯誤,AllUpgrade 造成了損壞"

#~ msgid "%s not a valid DEB package."
#~ msgstr "%s 並不是正確的 DEB 套件。"

#~ msgid ""
#~ "Using CD-ROM mount point %s\n"
#~ "Mounting CD-ROM\n"
#~ msgstr ""
#~ "使用光碟機掛載點 %s\n"
#~ "正在掛載光碟機\n"

#~ msgid "This is not a valid DEB archive, it has no '%s', '%s' or '%s' member"
#~ msgstr "這是個不正確的 DEB 套件檔,沒有 '%s', '%s' 或 '%s' 成員"

#~ msgid "MD5Sum mismatch"
#~ msgstr "MD5Sum 不符"

#~ msgid ""
#~ "I wasn't able to locate a file for the %s package. This might mean you "
#~ "need to manually fix this package."
#~ msgstr "找不到 %s 套件的某個檔案。這意味著您可能要手動修復這個套件。"

#~ msgid "Can not write log, openpty() failed (/dev/pts not mounted?)\n"
#~ msgstr "無法寫入記錄檔,openpty() 失敗(/dev/pts 未掛載?)\n"

#, fuzzy
#~ msgid "Skipping nonexistent file %s"
#~ msgstr "開啟設定檔 %s"

#~ msgid "Failed to remove %s"
#~ msgstr "無法移除 %s"

#~ msgid "Unable to create %s"
#~ msgstr "無法建立 %s"

#~ msgid "Failed to stat %sinfo"
#~ msgstr "無法取得 %sinfo 的狀態"

#~ msgid "The info and temp directories need to be on the same filesystem"
#~ msgstr "資料目錄與暫存目錄需位於同一檔案系統中"

#~ msgid "Failed to change to the admin dir %sinfo"
#~ msgstr "無法切換至管理者目錄 %sinfo"

#~ msgid "Internal error getting a package name"
#~ msgstr "內部錯誤,無法取得套件名稱"

#~ msgid "Reading file listing"
#~ msgstr "正在讀取檔案清單"

#~ msgid ""
#~ "Failed to open the list file '%sinfo/%s'. If you cannot restore this file "
#~ "then make it empty and immediately re-install the same version of the "
#~ "package!"
#~ msgstr ""
#~ "無法開啟清單檔 %sinfo/%s。如果您無法將此檔案還原,請清除檔案內容,然後立即"
#~ "重新安裝同一版本的套件!"

#~ msgid "Failed reading the list file %sinfo/%s"
#~ msgstr "無法讀取清單檔 %sinfo/%s"

#~ msgid "Internal error getting a node"
#~ msgstr "內部錯誤,無法取得節點"

#~ msgid "Failed to open the diversions file %sdiversions"
#~ msgstr "讀取抽換檔 %sdiversions 失敗"

#~ msgid "The diversion file is corrupted"
#~ msgstr "抽換檔已損壞"

#~ msgid "Invalid line in the diversion file: %s"
#~ msgstr "在抽換檔中的這一行有誤:%s"

#~ msgid "Internal error adding a diversion"
#~ msgstr "內部錯誤:在新增抽換資料時發生錯誤"

#~ msgid "The pkg cache must be initialized first"
#~ msgstr "套件快取必須先初始化"

#~ msgid "Failed to find a Package: header, offset %lu"
#~ msgstr "找不到套件:檔案標頭,位移 %lu"

#~ msgid "Bad ConfFile section in the status file. Offset %lu"
#~ msgstr "在 status 檔中的 ConfFile 區段損壞。位移 %lu"

#~ msgid "Error parsing MD5. Offset %lu"
#~ msgstr "在解析 MD5 時發生錯誤。位移 %lu"

#~ msgid "Couldn't change to %s"
#~ msgstr "無法切換至 %s"

#~ msgid "Failed to locate a valid control file"
#~ msgstr "找不到可用的 control 檔"

#~ msgid "Couldn't open pipe for %s"
#~ msgstr "無法開啟管線給 %s 使用"

#~ msgid "Read error from %s process"
#~ msgstr "由 %s 程序讀取錯誤"

#~ msgid "Got a single header line over %u chars"
#~ msgstr "取得一個單行超過 %u 字元的標頭"

#~ msgid "Malformed override %s line %lu #1"
#~ msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #1"

#~ msgid "Malformed override %s line %lu #2"
#~ msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #2"

#~ msgid "Malformed override %s line %lu #3"
#~ msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #3"

#~ msgid "decompressor"
#~ msgstr "解壓縮程式"

#~ msgid "read, still have %lu to read but none left"
#~ msgstr "讀取,仍有 %lu 未讀但已無空間"

#~ msgid "write, still have %lu to write but couldn't"
#~ msgstr "寫入,仍有 %lu 待寫入但已沒辨法"

#~ msgid "Error occurred while processing %s (NewPackage)"
#~ msgstr "在處理 %s 時發生錯誤 (NewPackage)"

#~ msgid "Error occurred while processing %s (UsePackage1)"
#~ msgstr "在處理 %s 時發生錯誤 (UsePackage1)"

#~ msgid "Error occurred while processing %s (NewFileDesc1)"
#~ msgstr "在處理 %s 時發生錯誤 (NewFileDesc1)"

#~ msgid "Error occurred while processing %s (UsePackage2)"
#~ msgstr "在處理 %s 時發生錯誤 (UsePackage2)"

#~ msgid "Error occurred while processing %s (NewFileVer1)"
#~ msgstr "在處理 %s 時發生錯誤 (NewFileVer1)"

#, fuzzy
#~ msgid "Error occurred while processing %s (NewVersion%d)"
#~ msgstr "在處理 %s 時發生錯誤 (NewVersion1)"

#~ msgid "Error occurred while processing %s (UsePackage3)"
#~ msgstr "在處理 %s 時發生錯誤 (UsePackage3)"

#~ msgid "Error occurred while processing %s (NewFileDesc2)"
#~ msgstr "在處理 %s 時發生錯誤 (NewFileDesc2)"

#~ msgid "Error occurred while processing %s (FindPkg)"
#~ msgstr "在處理 %s 時發生錯誤 (FindPkg)"

#~ msgid "Error occurred while processing %s (CollectFileProvides)"
#~ msgstr "在處理 %s 時發生錯誤 (CollectFileProvides)"

#~ msgid "Internal error, could not locate member"
#~ msgstr "內部錯誤:無法找到成員"

#, fuzzy
#~ msgid "Release file expired, ignoring %s (invalid since %s)"
#~ msgstr "Release 檔已過期,略過 %s(有效期限 %s)"

#~ msgid "E: Argument list from Acquire::gpgv::Options too long. Exiting."
#~ msgstr "錯誤:Acquire::gpgv::Options 的參數列表過長。結束執行。"

#~ msgid "Error occurred while processing %s (NewVersion2)"
#~ msgstr "在處理 %s 時發生錯誤 (NewVersion2)"

#~ msgid "Malformed line %u in source list %s (vendor id)"
#~ msgstr "來源列表 %2$s 中的第 %1$u 行的格式錯誤(提供者 ID)"

#~ msgid "Couldn't access keyring: '%s'"
#~ msgstr "無法存取鑰匙圈:'%s'"

#~ msgid "Could not patch file"
#~ msgstr "無法修補檔案"

#~ msgid "       %4i %s\n"
#~ msgstr "       %4i %s\n"

#~ msgid "%4i %s\n"
#~ msgstr "%4i %s\n"

#~ msgid "Processing triggers for %s"
#~ msgstr "正在進行 %s 的觸發程式"