make http size check work

1 files changed, 0 insertions, 511 deletions

diff --git a/doc/dpkg-tech.sgml b/doc/dpkg-tech.sgml
deleted file mode 100644
index ce0c5fa83..000000000
--- a/doc/dpkg-tech.sgml
+++ /dev/null
@@ -1,511 +0,0 @@
-<!doctype debiandoc  PUBLIC  "-//DebianDoc//DTD DebianDoc//EN">
-<book>
-<title>dpkg technical manual</title>
-
-<author>Tom Lees <email>tom@lpsg.demon.co.uk</email></author>
-<version>$Id: dpkg-tech.sgml,v 1.3 2003/02/12 15:05:45 doogie Exp $</version>
-
-<abstract>
-This document describes the minimum necessary workings for the APT dselect
-replacement. It gives an overall specification of what its external interface
-must look like for compatibility, and also gives details of some internal
-quirks.
-</abstract>
-
-<copyright>
-Copyright &copy; Tom Lees, 1997.
-<p>
-APT and this document are free software; you can redistribute them and/or
-modify them under the terms of the GNU General Public License as published
-by the Free Software Foundation; either version 2 of the License, or (at your
-option) any later version.
-
-<p>
-For more details, on Debian systems, see the file
-/usr/share/common-licenses/GPL for the full license.
-</copyright>
-
-<toc sect>
-
-<chapt>Quick summary of dpkg's external interface
-<sect id="control">Control files
-
-<p>
-The basic dpkg package control file supports the following major features:-
-
-<list>
-<item>5 types of dependencies:-
-	<list>
-	<item>Pre-Depends, which must be satisfied before a package may be
-	unpacked
-	<item>Depends, which must be satisfied before a package may be
-	configured
-	<item>Recommends, to specify a package which if not installed may
-	severely limit the usefulness of the package
-	<item>Suggests, to specify a package which may increase the
-	productivity of the package
-	<item>Conflicts, to specify a package which must NOT be installed
-	in order for the package to be configured
-	<item>Breaks, to specify a package which is broken by the
-	package and which should therefore not be configured while broken
-	</list>
-Each of these dependencies can specify a version and a depedency on that
-version, for example "<= 0.5-1", "== 2.7.2-1", etc. The comparators available
-are:-
-	<list>
-	<item>"&lt;&lt;" - less than
-	<item>"&lt;=" - less than or equal to
-	<item>"&gt;&gt;" - greater than
-	<item>"&gt;=" - greater than or equal to
-	<item>"==" - equal to
-	</list>
-<item>The concept of "virtual packages", which many other packages may provide,
-using the Provides mechanism. An example of this is the "httpd" virtual package,
-which all web servers should provide. Virtual package names may be used in
-dependency headers. However, current policy is that virtual packages do not
-support version numbers, so dependencies on virtual packages with versions
-will always fail.
-<item>Several other control fields, such as Package, Version, Description,
-Section, Priority, etc., which are mainly for classification purposes. The
-package name must consist entirely of lowercase characters, plus the characters
-'+', '-', and '.'. Fields can extend across multiple lines - on the second
-and subsequent lines, there is a space at the beginning instead of a field
-name and a ':'. Empty lines must consist of the text " .", which will be
-ignored, as will the initial space for other continuation lines. This feature
-is usually only used in the Description field.
-</list>
-
-<sect>The dpkg status area
-
-<p>
-The "dpkg status area" is the term used to refer to the directory where dpkg
-keeps its various status files (GNU would have you call it the dpkg shared
-state directory). This is always, on Debian systems, /var/lib/dpkg. However,
-the default directory name should not be hard-coded, but #define'd, so that
-alteration is possible (it is available via configure in dpkg 1.4.0.9 and
-above). Of course, in a library, code should be allowed to override the
-default directory, but the default should be part of the library (so that
-the user may change the dpkg admin dir simply by replacing the library).
-
-<p>
-Dpkg keeps a variety of files in its status area. These are discussed later
-on in this document, but a quick summary of the files is here:-
-
-<list>
-<item>available - this file contains a concatenation of control information
-from all the packages which dpkg knows about. This is updated using the dpkg
-commands "--update-avail &lt;file&gt;", "--merge-avail &lt;file&gt;", and
-"--clear-avail".
-<item>status - this file contains information on the following things for
-every package:-
-	<list>
-	<item>Whether it is installed, not installed, unpacked, removed,
-		failed configuration, or half-installed (deconfigured in
-		favour of another package).
-	<item>Whether it is selected as install, hold, remove, or purge.
-	<item>If it is "ok" (no installation problems), or "not-ok".
-	<item>It usually also contains the section and priority (so that
-		dselect may classify packages not in available)
-	<item>For packages which did not initially appear in the "available"
-		file when they were installed, the other control information
-		for them.
-	</list>
-   <p>
-   The exact format for the "Status:" field is:
-   <example>
-      Status: Want Flag Status
-   </example>
-   Where <var>Want</> may be one of <em>unknown</>, <em>install</>,
-   <em>hold</>, <em>deinstall</>, <em>purge</>. <var>Flag</>
-   may be one of <em>ok</>, <em>reinstreq</>, <em>hold</>,
-   <em>hold-reinstreq</>.
-   <var>Status</> may be one of <em>not-installed</>, <em>unpacked</>, 
-   <em>half-configured</>, <em>installed</>, <em>half-installed</>
-   <em>config-files</>, <em>post-inst-failed</>, <em>removal-failed</>.
-   The states are as follows:-
-   <taglist>
-     <tag>not-installed
-     <item>No files are installed from the package, it has no config files
-        left, it uninstalled cleanly if it ever was installed.
-     <tag>unpacked
-     <item>The basic files have been unpacked (and are listed in
-        /var/lib/dpkg/info/[package].list. There are config files present,
-        but the postinst script has _NOT_ been run.
-     <tag>half-configured
-     <item>The package was installed and unpacked, but the postinst script
-        failed in some way.
-     <tag>installed
-     <item>All files for the package are installed, and the configuration
-        was also successful.
-     <tag>half-installed
-     <item>An attempt was made to remove the packagem but there was a failure
-        in the prerm script.
-     <tag>config-files
-     <item>The package was "removed", not "purged". The config files are left,
-        but nothing else.
-     <tag>post-inst-failed
-     <item>Old name for half-configured. Do not use.
-     <tag>removal-failed
-     <item>Old name for half-installed. Do not use.
-   </taglist>
-   The two last items are only left in dpkg for compatibility - they are
-   understood by it, but never written out in this form.
-
-   <p>
-   Please see the dpkg source code, <tt>lib/parshelp.c</tt>, 
-   <em>statusinfos</>, <em>eflaginfos</> and <em>wantinfos</> for more 
-   details.
-   
-<item>info - this directory contains files from the control archive of every
-package currently installed. They are installed with a prefix of "&lt;packagename&gt;.".
-In addition to this, it also contains a file called &lt;package&gt;.list for every
-package, which contains a list of files. Note also that the control file is
-not copied into here; it is instead found as part of status or available.
-<item>methods - this directory is reserved for "method"-specific files - each
-"method" has a subdirectory underneath this directory (or at least, it can
-have). In addition, there is another subdirectory "mnt", where misc.
-filesystems (floppies, CD-ROMs, etc.) are mounted.
-<item>alternatives - directory used by the "update-alternatives" program. It
-contains one file for each "alternatives" interface, which contains information
-about all the needed symlinked files for each alternative.
-<item>diversions - file used by the "dpkg-divert" program. Each diversion takes
-three lines. The first is the package name (or ":" for user diversion), the
-second the original filename, and the third the diverted filename.
-<item>updates - directory used internally by dpkg. This is discussed later,
-in the section <ref id="updates">.
-<item>parts - temporary directory used by dpkg-split
-</list>
-
-<sect>The dpkg library files
-
-<p>
-These files are installed under /usr/lib/dpkg (usually), but
-/usr/local/lib/dpkg is also a possibility (as Debian policy dictates). Under
-this directory, there is a "methods" subdirectory. The methods subdirectory
-in turn contains any number of subdirectories for each general method
-processor (note that one set of method scripts can, and is, used for more than
-one of the methods listed under dselect).
-
-<p>
-The following files may be found in each of these subdirectories:-
-
-<list>
-<item>names - One line per method, two-digit priority to appear on menu
-at beginning, followed by a space, the name, and then another space and the
-short description.
-<item>desc.&lt;name&gt; - Contains the long description displayed by dselect
-when the cursor is put over the &lt;name&gt; method.
-<item>setup - Script or program which sets up the initial values to be used
-by this method. Called with first argument as the status area directory
-(/var/lib/dpkg), second argument as the name of the method (as in the directory
-name), and the third argument as the option (as in the names file).
-<item>install - Script/program called when the "install" option of dselect is
-run with this method. Same arguments as for setup.
-<item>update - Script/program called when the "update" option of dselect is
-run. Same arguments as for setup/install.
-</list>
-
-<sect>The "dpkg" command-line utility
-
-<sect1>"Documented" command-line interfaces
-
-<p>
-As yet unwritten. You can refer to the other manuals for now. See
-<manref name="dpkg" section="8">.
-
-<sect1>Environment variables which dpkg responds to
-
-<p>
-<list>
-<item>DPKG_NO_TSTP - if set to a non-null value, this variable causes dpkg to
-run a child shell process instead of sending itself a SIGTSTP, when the user
-selects to background the dpkg process when it asks about conffiles.
-<item>SHELL - used to determine which shell to run in the case when
-DPKG_NO_TSTP is set.
-<item>CC - used as the C compiler to call to determine the target architecture.
-The default is "gcc".
-<item>PATH - dpkg checks that it can find at least the following files in the
-path when it wants to run package installation scripts, and gives an error if
-it cannot find all of them:-
-	<list>
-	<item>ldconfig
-	<item>start-stop-daemon
-	<item>install-info
-	<item>update-rc.d
-	</list>
-</list>
-
-<sect1>Assertions
-
-<p>
-The dpkg utility itself is required for quite a number of packages, even if
-they have been installed with a tool totally separate from dpkg. The reason for
-this is that some packages, in their pre-installation scripts, check that your
-version of dpkg supports certain features. This was broken from the start, and
-it should have actually been a control file header "Dpkg-requires", or similar.
-What happens is that the configuration scripts will abort or continue according
-to the exit code of a call to dpkg, which will stop them from being wrongly
-configured.
-
-<p>
-These special command-line options, which simply return as true or false are
-all prefixed with "--assert-". Here is a list of them (without the prefix):-
-
-<list>
-<item>support-predepends - Returns success or failure according to whether
-a version of dpkg which supports predepends properly (1.1.0 or above) is
-installed, according to the database.
-<item>working-epoch - Return success or failure according to whether a version
-of dpkg which supports epochs in version properly (1.4.0.7 or above) is
-installed, according to the database.
-</list>
-
-<p>
-Both these options check the status database to see what version of the "dpkg"
-package is installed, and check it against a known working version.
-
-<sect1>--predep-package
-
-<p>
-This strange option is described as follows in the source code:
-
-<example>
-/* Print a single package which:
- *  (a) is the target of one or more relevant predependencies.
- *  (b) has itself no unsatisfied pre-dependencies.
- * If such a package is present output is the Packages file entry,
- *  which can be massaged as appropriate.
- * Exit status:
- *  0 = a package printed, OK
- *  1 = no suitable package available
- *  2 = error
- */
-</example>
-
-<p>
-On further inspection of the source code, it appears that what is does is
-this:-
-
-<list>
-<item>Looks at the packages in the database which are selected as "install",
-and are installed.
-<item>It then looks at the Pre-Depends information for each of these packages
-from the available file. When it find a package for which any of the
-pre-dependencies are not satisfied, it breaks from the loop through the packages.
-<item>It then looks through the unsatisfied pre-dependencies, and looks for
-packages which would satisfy this pre-dependency, stopping on the first it
-finds. If it finds none, it bombs out with an error.
-<item>It then continues this for every dependency of the initial package.
-</list>
-
-Eventually, it writes out the record of all the packages to satisfy the
-pre-dependencies. This is used by the disk method to make sure that its
-dependency ordering is correct. What happens is that all pre-depending
-packages are first installed, then it runs dpkg -iGROEB on the directory,
-which installs in the order package files are found. Since pre-dependencies
-mean that a package may not even be unpacked unless they are satisfied, it is
-necessary to do this (usually, since all the package files are unpacked in one
-phase, the configured in another, this is not needed).
-
-<chapt>dpkg-deb and .deb file internals
-
-<p>
-This chapter describes the internals to the "dpkg-deb" tool, which is used
-by "dpkg" as a back-end. dpkg-deb has its own tar extraction functions, which
-is the source of many problems, as it does not support long filenames, using
-extension blocks.
-
-<sect>The .deb archive format
-
-<p>
-The main principal of the new-format Debian archive (I won't describe the old
-format - for that have a look at deb-old.5), is that the archive really is
-an archive - as used by "ar" and friends. However, dpkg-deb uses this format
-internally, rather than calling "ar". Inside this archive, there are usually
-the following members:-
-
-<list>
-<item>debian-binary
-<item>control.tar.gz
-<item>data.tar.gz
-</list>
-
-<p>
-The debian-binary member consists simply of the string "2.0", indicating the
-format version. control.tar.gz contains the control files (and scripts), and
-the data.tar.gz contains the actual files to populate the filesystem with.
-Both tarfiles extract straight into the current directory. Information on the
-tar formats can be found in the GNU tar info page. Since dpkg-deb calls
-"tar -cf" to build packages, the Debian packages use the GNU extensions.
-
-<sect>The dpkg-deb command-line 
-
-<p>
-dpkg-deb documents itself thoroughly with its '--help' command-line option.
-However, I am including a reference to these for completeness. dpkg-deb
-supports the following options:-
-
-<list>
-<item>--build (-b) &lt;dir&gt; - builds a .deb archive, takes a directory which
-contains all the files as an argument. Note that the directory
-&lt;dir&gt;/DEBIAN will be packed separately into the control archive.
-<item>--contents (-c) &lt;debfile&gt; - Lists the contents of the "data.tar.gz"
-member.
-<item>--control (-e) &lt;debfile&gt; - Extracts the control archive into a
-directory called DEBIAN. Alternatively, with another argument, it will extract
-it into a different directory.
-<item>--info (-I) &lt;debfile&gt; - Prints the contents of the "control" file
-in the control archive to stdout. Alternatively, giving it other arguments will
-cause it to print the contents of those files instead.
-<item>--field (-f) &lt;debfile&gt; &lt;field&gt; ... - Prints any number of
-fields from the "control" file. Giving it extra arguments limits the fields it
-prints to only those specified. With no command-line arguments other than a
-filename, it is equivalent to -I and just the .deb filename.
-<item>--extract (-x) &lt;debfile&gt; &lt;dir&gt; - Extracts the data archive
-of a debian package under the directory &lt;dir&gt;.
-<item>--vextract (-X) &lt;debfile&gt; &lt;dir&gt; - Same as --extract, except
-it is equivalent of giving tar the '-v' option - it prints the filenames as
-it extracts them.
-<item>--fsys-tarfile &lt;debfile&gt; - This option outputs a gunzip'd version
-of data.tar.gz to stdout.
-<item>--new - sets the archive format to be used to the new Debian format
-<item>--old - sets the archive format to be used to the old Debian format
-<item>--debug - Tells dpkg-deb to produce debugging output
-<item>--nocheck - Tells dpkg-deb not to check the sanity of the control file
-<item>--help (-h) - Gives a help message
-<item>--version - Shows the version number
-<item>--licence/--license (UK/US spellings) - Shows a brief outline of the GPL
-</list>
-
-<sect1>Internal checks used by dpkg-deb when building packages
-
-<p>
-Here is a list of the internal checks used by dpkg-deb when building packages.
-It is in the order they are done.
-
-<list>
-<item>First, the output Debian archive argument, if it is given, is checked
-using stat. If it is a directory, an internal flag is set. This check is only
-made if the archive name is specified explicitly on the command-line. If the
-argument was not given, the default is the directory name, with ".deb"
-appended.
-<item>Next, the control file is checked, unless the --nocheck flag was
-specified on the command-line. dpkg-deb will bomb out if the second argument
-to --build was a directory, and --nocheck was specified. Note that dpkg-deb
-will not be able to determine the name of the package in this case. In the
-control file, the following things are checked:-
-	<list>
-	<item>The package name is checked to see if it contains any invalid
-	characters (see <ref id="control"> for this).
-	<item>The priority field is checked to see if it uses standard values,
-	and user-defined values are warned against. However, note that this
-	check is now redundant, since the control file no longer contains
-	the priority - the changes file now does this.
-	<item>The control file fields are then checked against the standard
-	list of fields which appear in control files, and any "user-defined"
-	fields are reported as warnings.
-	<item>dpkg-deb then checks that the control file contains a valid
-	version number.
-	</list>
-<item>After this, in the case where a directory was specified to build the
-.deb file in, the filename is created as "directory/pkg_ver.deb" or
-"directory/pkg_ver_arch.deb", depending on whether the control file contains
-an architecture field.
-<item>Next, dpkg-deb checks for the &lt;dir&gt;/DEBIAN directory. It complains
-if it doesn't exist, or if it has permissions &lt; 0755, or &gt; 0775.
-<item>It then checks that all the files in this subdir are either symlinks
-or plain files, and have permissions between 0555 and 0775.
-<item>The conffiles file is then checked to see if the filenames are too
-long. Warnings are produced for each that is. After this, it checks that
-the package provides initial copies of each of these conffiles, and that
-they are all plain files.
-</list>
-
-<chapt>dpkg internals
-
-<p>
-This chapter describes the internals of dpkg itself. Although the low-level
-formats are quite simple, what dpkg does in certain cases often does not
-make sense.
-
-<sect id="updates">Updates
-
-<p>
-This describes the /var/lib/dpkg/updates directory. The function of this
-directory is somewhat strange, and seems only to be used internally. A function
-called cleanupdates is called whenever the database is scanned. This function
-in turn uses <manref name="scandir" section="3">, to sort the files in this
-directory. Files who names do not consist entirely of digits are discarded.
-dpkg also causes a fatal error if any of the filenames are different lengths.
-
-<p>
-After having scanned the directory, dpkg in turn parses each file the same way
-it parses the status file (they are sorted by the scandir to be in numerical
-order). After having done this, it then writes the status information back
-to the "status" file, and removes all the "updates" files.
-
-<p>
-These files are created internally by dpkg's "checkpoint" function, and are
-cleaned up when dpkg exits cleanly.
-
-<p>
-Juding by the use of the updates directory I would call it a Journal. Inorder
-to efficiently ensure the complete integrity of the status file dpkg will
-"checkpoint" or journal all of it's activities in the updates directory. By
-merging the contents of the updates directory (in order!!) against the 
-original status file it can get the precise current state of the system,
-even in the event of a system failure while dpkg is running.
-
-<p> 
-The other option would be to sync-rewrite the status file after each 
-operation, which would kill performance.
-
-<p>
-It is very important that any program that uses the status file abort if
-the updates directory is not empty! The user should be informed to run dpkg
-manually (what options though??) to correct the situation.
-
-<sect>What happens when dpkg reads the database
-
-<p>
-First, the status file is read. This gives dpkg an initial idea of the packages
-that are there. Next, the updates files are read in, overriding the status
-file, and if necessary, the status file is re-written, and updates files are
-removed. Finally, the available file is read. The available file is read
-with flags which preclude dpkg from updating any status information from it,
-though - installed version, etc., and is also told to record that the packages
-it reads this time are available, not installed.
-
-<p>
-More information on updates is given above.
-
-<sect>How dpkg compares version numbers
-
-<p>
-Version numbers consist of three parts: the epoch, the upstream version, and
-the Debian revision. Dpkg compares these parts in that order. If the epochs
-are different, it returns immediately, and so on.
-
-<p>
-However, the important part is how it compares the versions which are
-essentially stored as just strings. These are compared in two distinct parts:
-those consisting of numerical characters (which are evaluated, and then
-compared), and those consisting of other characters. When comparing
-non-numerical parts, they are compared as the character values (ASCII), but
-non-alphabetical characters are considered "greater than" alphabetical ones.
-Also note that longer strings (after excluding differences where numerical
-values are equal) are considered "greater than" shorter ones.
-
-<p>
-Here are a few examples of how these rules apply:-
-
-<example>
-15 > 10
-0010 == 10
-
-d.r > dsr
-32.d.r == 0032.d.r
-d.rnr < d.rnrn
-</example>
-
-</book>