Merge branch 'feature/amtshilfe' into 'master'

reimplement mirror method

See merge request apt-team/apt!1

1 files changed, 0 insertions, 186 deletions

diff --git a/doc/examples/apt-https-method-example.conf b/doc/examples/apt-https-method-example.conf
deleted file mode 100644
index 3152ef1e2..000000000
--- a/doc/examples/apt-https-method-example.conf
+++ /dev/null
@@ -1,186 +0,0 @@
-/* This file is a sample configuration for apt https method. Configuration
-   parameters found in this example file are expected to be used in main
-   apt.conf file, just like other configuration parameters for different
-   methods (ftp, file, ...).
-
-   This example file starts with a common setup that voluntarily exhibits
-   all available configurations knobs with simple comments. Extended
-   comments on the behavior of the option is provided at the end for
-   better readability. As a matter of fact, a common configuration file
-   will certainly contain far less elements and benefit of default values
-   for many parameters.
-
-   Because some configuration parameters for apt https method in following
-   examples apply to specific (fictional) repositories, the associated
-   sources.list file is provided here:
-
-   ...
-
-   deb     https://secure.dom1.tld/debian unstable main contrib non-free
-   deb-src https://secure.dom1.tld/debian unstable main contrib non-free
-
-   deb     https://secure.dom2.tld/debian unstable main contrib non-free
-   deb-src https://secure.dom2.tld/debian unstable main contrib non-free
-
-   ...
-
-
-   Some notes on the servers:
-
-    - secure.dom1.tld is freely accessible using https (no client
-      authentication is required).
-    - secure.dom1.tld certificate is part of a multi level PKI, and we
-      want to specifically check the issuer of its certificate. We do
-      not have the constraint for secure.dom2.tld
-    - secure.dom2.tld requires client authentication by certificate
-      to access its content.
-    - The certificate presented by both server have (as expected) a CN that
-      matches their respective DNS names.
-    - We have CRL available for both dom1.tld and dom2.tld PKI, and intend
-      to use them.
-    - It sometimes happens that we had other more generic https available
-      repository to our list. We want the checks to be performed against
-      a common list of anchors (like the one provided by ca-certificates
-      package for instance)
-
-   The sample configuration below basically covers those simple needs.
-*/
-
-
-// Verify peer certificate and also matching between certificate name
-// and server name as provided in sources.list (default values)
-Acquire::https::Verify-Peer "true";
-Acquire::https::Verify-Host "true";
-
-// Except otherwise specified, use that list of anchors
-Acquire::https::CaInfo     "/etc/ssl/certs/ca-certificates.pem";
-
-// Use a specific anchor and associated CRL. Enforce issuer of
-// server certificate using its cert.
-Acquire::https::secure.dom1.tld::CaInfo     "/etc/apt/certs/ca-dom1-crt.pem";
-Acquire::https::secure.dom1.tld::CrlFile    "/etc/apt/certs/ca-dom1-crl.pem";
-Acquire::https::secure.dom1.tld::IssuerCert "/etc/apt/certs/secure.dom1-issuer-crt.pem";
-
-// Like previous for anchor and CRL, but also provide our
-// certificate and keys for client authentication.
-Acquire::https::secure.dom2.tld::CaInfo  "/etc/apt/certs/ca-dom2-crt.pem";
-Acquire::https::secure.dom2.tld::CrlFile "/etc/apt/certs/ca-dom2-crl.pem";
-Acquire::https::secure.dom2.tld::SslCert "/etc/apt/certs/my-crt.pem";
-Acquire::https::secure.dom2.tld::SslKey  "/etc/apt/certs/my-key.pem";
-
-// No need to downgrade, TLS will be proposed by default. Uncomment
-// to have SSLv3 proposed.
-// Acquire::https::mirror.ipv6.ssi.corp::SslForceVersion "SSLv3";
-
-// No need for more debug if every is fine (default). Uncomment
-// me to get additional information.
-// Debug::Acquire::https "true";
-
-
-/*
-  Options with extended comments:
-
-  Acquire::https[::repo.domain.tld]::CaInfo  "/path/to/ca/certs.pem";
-
-    A string providing the path of a file containing the list of trusted
-    CA certificates used to verify the server certificate. The pointed
-    file is made of the concatenation of the CA certificates (in
-    PEM format) creating the chain used for the verification of the path
-    from the root (self signed one). If the remote server provides the
-    whole chain during the exchange, the file need only contain the root
-    certificate. Otherwise, the whole chain is required.
-
-    If you need to support multiple authorities, the only way is to
-    concatenate everything.
-
-    If None is provided, the default CA bundle used by GnuTLS (apt https
-    method is linked against libcurl-gnutls) is used. At the time of
-    writing, /etc/ssl/certs/ca-certificates.crt.
-
-    If no specific hostname is provided, the file is used by default
-    for all https targets. If a specific mirror is provided, it is
-    used for the https entries in the sources.list file that use that
-    repository (with the same name).
-
-  Acquire::https[::repo.domain.tld]::CrlFile  "/path/to/all/crl.pem";
-
-    Like previous knob but for passing the list of CRL files (in PEM
-    format) to be used to verify revocation status. Again, if the
-    option is defined with no specific mirror (probably makes little
-    sense), this CRL information is used for all defined https entries
-    in sources.list file. In a mirror specific context, it only applies
-    to that mirror.
-
-  Acquire::https[::repo.domain.tld]::IssuerCert "/path/to/issuer/cert.pem";
-
-    Allows one to constrain the issuer of the server certificate (for all
-    https mirrors or a specific one) to a specific issuer. If the
-    server certificate has not been issued by this certificate,
-    connection fails.
-
-  Acquire::https[::repo.domain.tld]::Verify-Peer "true";
-
-    When authenticating the server, if the certificate verification fails
-    for some reason (expired, revoked, man in the middle, lack of anchor,
-    ...), the connection fails. This is obviously what you want in all
-    cases and what the default value (true) of this option provides.
-
-    If you know EXACTLY what you are doing, setting this option to "false"
-    allow you to skip peer certificate verification and make the exchange
-    succeed. Again, this option is for debugging or testing purpose only.
-    It removes ALL the security provided by the use of SSL.TLS to secure
-    the HTTP exchanges.
-
-  Acquire::https[::repo.domain.tld]::Verify-Host "true";
-
-    The certificate provided by the server during the TLS/SSL exchange
-    provides the identity of the server which should match the DNS name
-    used to access it. By default, as requested by RFC 2818, the name
-    of the mirror is checked against the identity found in the
-    certificate. This default behavior is safe and should not be
-    changed. If you know that the server you are using has a DNS name
-    which does not match the identity in its certificate, you can
-    [report that issue to its administrator or] set the option to
-    "false", which will prevent the comparison to be done.
-
-    The options can be set globally or on a per-mirror basis. If set
-    globally, the DNS name used is the one found in the sources.list
-    file in the https URI.
-
-  Acquire::https[::repo.domain.tld]::SslCert "/path/to/client/cert.pem";
-  Acquire::https[::repo.domain.tld]::SslKey  "/path/to/client/key.pem";
-
-    These two options provides support for client authentication using
-    certificates. They respectively accept the X.509 client certificate
-    in PEM format and the associated client key in PEM format (non
-    encrypted form).
-
-    The options can be set globally (which rarely makes sense) or on a
-    per-mirror basis.
-
-  Acquire::https[::repo.domain.tld]::SslForceVersion "TLSv1";
-
-    This option can be use to select the version which will be proposed
-    to the server. "SSLv3" and "TLSv1" are supported. SSLv2, which is
-    considered insecure anyway is not supported (by gnutls, which is
-    used by libcurl against which apt https method is linked).
-
-    When the option is set to "SSLv3" to have apt propose SSLv3 (and
-    associated sets of ciphersuites) instead of TLSv1 (the default)
-    when performing the exchange. This prevents the server to select
-    TLSv1 and use associated ciphersuites. You should probably not use
-    this option except if you know exactly what you are doing.
-
-    Note that the default setting does not guarantee that the server
-    will not select SSLv3 (for ciphersuites and SSL/TLS version as
-    selection is always done by the server, in the end). It only means
-    that apt will not advertise TLS support.
-
-  Debug::Acquire::https "true";
-
-    This option can be used to show debug information. Because it is
-    quite verbose, it is mainly useful to debug problems in case of
-    failure to connect to a server for some reason. The default value
-    is "false".
-
-*/