* doc/apt.conf.5.xml:

  - review and fix typo, grammar and style issues
  - rephrase APT::Immediate-Configuration and many others

1 files changed, 1203 insertions, 733 deletions

diff --git a/doc/po/de.po b/doc/po/de.po
index c84999b21..c9eb39e51 100644
--- a/doc/po/de.po
+++ b/doc/po/de.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: apt-doc 0.9.5\n"
 "Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
-"POT-Creation-Date: 2012-06-06 23:46+0300\n"
+"POT-Creation-Date: 2012-06-09 19:12+0300\n"
 "PO-Revision-Date: 2012-05-21 23:18+0100\n"
 "Last-Translator: Chris Leick <c.leick@vollbio.de>\n"
 "Language-Team: German <debian-l10n-german@lists.debian.org>\n"
@@ -1246,12 +1246,6 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-get.8.xml:338
-#, fuzzy
-#| msgid ""
-#| "Simulate prints out a series of lines each one representing a dpkg "
-#| "operation, Configure (Conf), Remove (Remv), Unpack (Inst). Square "
-#| "brackets indicate broken packages and empty set of square brackets "
-#| "meaning breaks that are of no consequence (rare)."
 msgid ""
 "Simulated runs print out a series of lines, each representing a "
 "<command>dpkg</command> operation: configure (<literal>Conf</literal>), "
@@ -1259,9 +1253,10 @@ msgid ""
 "Square brackets indicate broken packages, and empty square brackets indicate "
 "breaks that are of no consequence (rare)."
 msgstr ""
-"Simulieren gibt eine Serie von Zeilen aus, von denen jede eine Dpkg-"
-"Operation darstellt: Konfigurieren (Conf), Entfernen (Remv), Entpacken "
-"(Inst). Eckige Klammern zeigen beschädigte Pakete an und ein leeres Paar "
+"Simulieren gibt eine Serie von Zeilen aus, von denen jede eine "
+"<command>dpkg</command>-Operation darstellt: Konfigurieren (<literal>Conf</"
+"literal>), Entfernen (<literal>Remv</literal>), Entpacken (<literal>Inst</"
+"literal>). Eckige Klammern zeigen beschädigte Pakete an und ein leeres Paar "
 "eckiger Klammern bedeutet Unterbrechungen, die keine Folgen haben (selten)."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
@@ -1291,10 +1286,6 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-get.8.xml:359
-#, fuzzy
-#| msgid ""
-#| "Show upgraded packages; Print out a list of all packages that are to be "
-#| "upgraded.  Configuration Item: <literal>APT::Get::Show-Upgraded</literal>."
 msgid ""
 "Show upgraded packages; print out a list of all packages that are to be "
 "upgraded.  Configuration Item: <literal>APT::Get::Show-Upgraded</literal>."
@@ -1581,14 +1572,14 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><title>
 #: apt-get.8.xml:518 apt-cache.8.xml:343 apt-key.8.xml:174 apt-mark.8.xml:125
-#: apt.conf.5.xml:1118 apt_preferences.5.xml:698
+#: apt.conf.5.xml:1156 apt_preferences.5.xml:698
 msgid "Files"
 msgstr "Dateien"
 
 #. type: Content of: <refentry><refsect1><title>
 #: apt-get.8.xml:528 apt-cache.8.xml:350 apt-key.8.xml:195 apt-mark.8.xml:131
 #: apt-secure.8.xml:191 apt-cdrom.8.xml:144 apt-config.8.xml:109
-#: apt.conf.5.xml:1124 apt_preferences.5.xml:705 sources.list.5.xml:252
+#: apt.conf.5.xml:1162 apt_preferences.5.xml:705 sources.list.5.xml:252
 #: apt-extracttemplates.1.xml:70 apt-sortpkgs.1.xml:63
 #: apt-ftparchive.1.xml:607
 msgid "See Also"
@@ -3199,11 +3190,17 @@ msgstr "Konfigurationsdatei für APT"
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt.conf.5.xml:42
+#, fuzzy
+#| msgid ""
+#| "<filename>apt.conf</filename> is the main configuration file for the APT "
+#| "suite of tools, but by far not the only place changes to options can be "
+#| "made. All tools therefore share the configuration files and also use a "
+#| "common command line parser to provide a uniform environment."
 msgid ""
-"<filename>apt.conf</filename> is the main configuration file for the APT "
-"suite of tools, but by far not the only place changes to options can be "
-"made. All tools therefore share the configuration files and also use a "
-"common command line parser to provide a uniform environment."
+"<filename>/etc/apt/apt.conf</filename> is the main configuration file shared "
+"by all the tools in the APT suite of tools, though it is by no means the "
+"only place options can be set. The suite also shares a common command line "
+"parser to provide a uniform environment."
 msgstr ""
 "<filename>apt.conf</filename> ist die Hauptkonfigurationsdatei für die APT-"
 "Werkzeugsammlung, aber bei weitem nicht der einzige Ort, an dem Änderungen "
@@ -3212,7 +3209,7 @@ msgstr ""
 "benutzt, um eine einheitliche Umgebung bereitzustellen."
 
 #. type: Content of: <refentry><refsect1><orderedlist><para>
-#: apt.conf.5.xml:47
+#: apt.conf.5.xml:48
 msgid ""
 "When an APT tool starts up it will read the configuration files in the "
 "following order:"
@@ -3221,7 +3218,7 @@ msgstr ""
 "folgenden Reihenfolge lesen:"
 
 #. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:49
+#: apt.conf.5.xml:50
 msgid ""
 "the file specified by the <envar>APT_CONFIG</envar> environment variable (if "
 "any)"
@@ -3230,15 +3227,15 @@ msgstr ""
 "angegeben wird (falls gesetzt)"
 
 #. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:51
+#: apt.conf.5.xml:52
 msgid ""
 "all files in <literal>Dir::Etc::Parts</literal> in alphanumeric ascending "
 "order which have either no or \"<literal>conf</literal>\" as filename "
 "extension and which only contain alphanumeric, hyphen (-), underscore (_) "
 "and period (.) characters.  Otherwise APT will print a notice that it has "
 "ignored a file, unless that file matches a pattern in the <literal>Dir::"
-"Ignore-Files-Silently</literal> configuration list - in this case it will be "
-"silently ignored."
+"Ignore-Files-Silently</literal> configuration list - in which case it will "
+"be silently ignored."
 msgstr ""
 "alle Dateien in <literal>Dir::Etc::Parts</literal> in aufsteigender "
 "alphanumerischer Reihenfolge, die entweder keine oder »<literal>conf</"
@@ -3250,7 +3247,7 @@ msgstr ""
 "sie stillschweigend ignoriert."
 
 #. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:58
+#: apt.conf.5.xml:59
 msgid ""
 "the main configuration file specified by <literal>Dir::Etc::main</literal>"
 msgstr ""
@@ -3258,7 +3255,7 @@ msgstr ""
 "angegeben wird"
 
 #. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:60
+#: apt.conf.5.xml:61
 msgid ""
 "the command line options are applied to override the configuration "
 "directives or to load even more configuration files."
@@ -3267,16 +3264,16 @@ msgstr ""
 "zu überschreiben oder um sogar mehrere Konfigurationsdateien zu laden."
 
 #. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:64
+#: apt.conf.5.xml:65
 msgid "Syntax"
 msgstr "Syntax"
 
 #. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:65
+#: apt.conf.5.xml:66
 msgid ""
 "The configuration file is organized in a tree with options organized into "
 "functional groups. Option specification is given with a double colon "
-"notation, for instance <literal>APT::Get::Assume-Yes</literal> is an option "
+"notation; for instance <literal>APT::Get::Assume-Yes</literal> is an option "
 "within the APT tool group, for the Get tool. Options do not inherit from "
 "their parent groups."
 msgstr ""
@@ -3287,19 +3284,31 @@ msgstr ""
 "das Werkzeug Get. Optionen werden nicht von ihren Elterngruppe geerbt."
 
 #. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:71
+#: apt.conf.5.xml:72
+#, fuzzy
+#| msgid ""
+#| "Syntactically the configuration language is modeled after what the ISC "
+#| "tools such as bind and dhcp use. Lines starting with <literal>//</"
+#| "literal> are treated as comments (ignored), as well as all text between "
+#| "<literal>/*</literal> and <literal>*/</literal>, just like C/C++ "
+#| "comments.  Each line is of the form <literal>APT::Get::Assume-Yes \"true"
+#| "\";</literal>. The trailing semicolon and the quotes are required. The "
+#| "value must be on one line, and there is no kind of string concatenation. "
+#| "It must not include inside quotes.  The behavior of the backslash \"\\\" "
+#| "and escaped characters inside a value is undefined and it should not be "
+#| "used. An option name may include alphanumerical characters and the \"/-:._"
+#| "+\" characters. A new scope can be opened with curly braces, like:"
 msgid ""
 "Syntactically the configuration language is modeled after what the ISC tools "
 "such as bind and dhcp use. Lines starting with <literal>//</literal> are "
 "treated as comments (ignored), as well as all text between <literal>/*</"
 "literal> and <literal>*/</literal>, just like C/C++ comments.  Each line is "
-"of the form <literal>APT::Get::Assume-Yes \"true\";</literal>. The trailing "
-"semicolon and the quotes are required. The value must be on one line, and "
-"there is no kind of string concatenation. It must not include inside "
-"quotes.  The behavior of the backslash \"\\\" and escaped characters inside "
-"a value is undefined and it should not be used. An option name may include "
-"alphanumerical characters and the \"/-:._+\" characters. A new scope can be "
-"opened with curly braces, like:"
+"of the form <literal>APT::Get::Assume-Yes \"true\";</literal>.  The "
+"quotation marks and trailing semicolon are required.  The value must be on "
+"one line, and there is no kind of string concatenation.  Values must not "
+"include backslashes or extra quotation marks.  Option names are made up of "
+"alphanumeric characters and the characters \"/-:._+\".  A new scope can be "
+"opened with curly braces, like this:"
 msgstr ""
 "Syntaktisch ist die Konfigurationssprache dem nachempfunden, was die ISC-"
 "Werkzeuge, wie bind und dhcp, benutzen. Zeilen, die mit <literal>//</"
@@ -3338,7 +3347,7 @@ msgstr ""
 msgid ""
 "with newlines placed to make it more readable. Lists can be created by "
 "opening a scope and including a single string enclosed in quotes followed by "
-"a semicolon. Multiple entries can be included, each separated by a semicolon."
+"a semicolon. Multiple entries can be included, separated by a semicolon."
 msgstr ""
 "mit eingefügten Zeilenumbrüchen, um es leserlicher zu gestalten. Listen "
 "können erstellt werden, indem ein Geltungsbereich geöffnet wird und eine "
@@ -3364,9 +3373,13 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt.conf.5.xml:105
+#, fuzzy
+#| msgid ""
+#| "The names of the configuration items are not case-sensitive. So in the "
+#| "previous example you could use <literal>dpkg::pre-install-pkgs</literal>."
 msgid ""
-"The names of the configuration items are not case-sensitive. So in the "
-"previous example you could use <literal>dpkg::pre-install-pkgs</literal>."
+"Case is not significant in names of configuration items, so in the previous "
+"example you could use <literal>dpkg::pre-install-pkgs</literal>."
 msgstr ""
 "Die Namen der Konfigurationselemente sind nicht von Groß- und "
 "Kleinschreibung abhängig. Deshalb könnten Sie im vorherigen Beispiel auch "
@@ -3375,11 +3388,11 @@ msgstr ""
 #. type: Content of: <refentry><refsect1><para>
 #: apt.conf.5.xml:108
 msgid ""
-"Names for the configuration items are optional if a list is defined as it "
-"can be see in the <literal>DPkg::Pre-Install-Pkgs</literal> example above. "
-"If you don't specify a name a new entry will simply add a new option to the "
-"list. If you specify a name you can override the option as every other "
-"option by reassigning a new value to the option."
+"Names for the configuration items are optional if a list is defined as can "
+"be seen in the <literal>DPkg::Pre-Install-Pkgs</literal> example above. If "
+"you don't specify a name a new entry will simply add a new option to the "
+"list. If you specify a name you can override the option in the same way as "
+"any other option by reassigning a new value to the option."
 msgstr ""
 "Namen für die Konfigurationselemente sind optional, wenn eine Liste, wie sie "
 "im Beispiel <literal>DPkg::Pre-Install-Pkgs</literal> oberhalb gesehen "
@@ -3390,14 +3403,23 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt.conf.5.xml:113
-msgid ""
-"Two specials are allowed, <literal>#include</literal> (which is deprecated "
-"and not supported by alternative implementations) and <literal>#clear</"
-"literal>: <literal>#include</literal> will include the given file, unless "
-"the filename ends in a slash, then the whole directory is included.  "
-"<literal>#clear</literal> is used to erase a part of the configuration tree. "
-"The specified element and all its descendants are erased.  (Note that these "
-"lines also need to end with a semicolon.)"
+#, fuzzy
+#| msgid ""
+#| "Two specials are allowed, <literal>#include</literal> (which is "
+#| "deprecated and not supported by alternative implementations) and "
+#| "<literal>#clear</literal>: <literal>#include</literal> will include the "
+#| "given file, unless the filename ends in a slash, then the whole directory "
+#| "is included.  <literal>#clear</literal> is used to erase a part of the "
+#| "configuration tree. The specified element and all its descendants are "
+#| "erased.  (Note that these lines also need to end with a semicolon.)"
+msgid ""
+"Two special commands are defined: <literal>#include</literal> (which is "
+"deprecated and not supported by alternative implementations) and "
+"<literal>#clear</literal>. <literal>#include</literal> will include the "
+"given file, unless the filename ends in a slash, in which case the whole "
+"directory is included.  <literal>#clear</literal> is used to erase a part of "
+"the configuration tree. The specified element and all its descendants are "
+"erased.  (Note that these lines also need to end with a semicolon.)"
 msgstr ""
 "Es sind die beiden Spezialfälle <literal>#include</literal> (das missbilligt "
 "ist und von alternativen Implementierungen nicht unterstützt wird) und "
@@ -3409,13 +3431,20 @@ msgstr ""
 "(Beachten Sie, dass diese Zeilen auch mit einem Semikolon enden müssen.)"
 
 #. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:121
-msgid ""
-"The #clear command is the only way to delete a list or a complete scope.  "
-"Reopening a scope or the ::-style described below will <emphasis>not</"
-"emphasis> override previously written entries. Only options can be "
-"overridden by addressing a new value to it - lists and scopes can't be "
-"overridden, only cleared."
+#: apt.conf.5.xml:123
+#, fuzzy
+#| msgid ""
+#| "The #clear command is the only way to delete a list or a complete scope.  "
+#| "Reopening a scope or the ::-style described below will <emphasis>not</"
+#| "emphasis> override previously written entries. Only options can be "
+#| "overridden by addressing a new value to it - lists and scopes can't be "
+#| "overridden, only cleared."
+msgid ""
+"The <literal>#clear</literal> command is the only way to delete a list or a "
+"complete scope. Reopening a scope (or using the syntax described below with "
+"an appended <literal>::</literal>) will <emphasis>not</emphasis> override "
+"previously written entries. Options can only be overridden by addressing a "
+"new value to them - lists and scopes can't be overridden, only cleared."
 msgstr ""
 "Der #clear-Befehl ist der einzige Weg, eine Liste oder einen kompletten "
 "Geltungsbereich zu löschen. Erneutes Öffnen eines Geltungsbereichs oder der "
@@ -3425,39 +3454,54 @@ msgstr ""
 "überschrieben, sondern nur bereinigt werden."
 
 #. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:126
+#: apt.conf.5.xml:131
 msgid ""
-"All of the APT tools take a -o option which allows an arbitrary "
+"All of the APT tools take an -o option which allows an arbitrary "
 "configuration directive to be specified on the command line. The syntax is a "
 "full option name (<literal>APT::Get::Assume-Yes</literal> for instance) "
 "followed by an equals sign then the new value of the option. To append a new "
-"element to a list, add a trailing :: to the name of the list. (As you might "
-"suspect: The scope syntax can't be used on the command line.)"
+"element to a list, add a trailing <literal>::</literal> to the name of the "
+"list.  (As you might suspect, the scope syntax can't be used on the command "
+"line.)"
 msgstr ""
 "Alle APT-Werkzeuge bringen eine Option -o mit, die es einer beliebigen "
 "Konfigurationsdirektiven erlaubt, auf der Befehlszeile angegeben zu werden. "
 "Die Syntax ist ein vollständiger Optionsname (<literal>APT::Get::Assume-Yes</"
 "literal> zum Beispiel), gefolgt von einem Gleichheitszeichen und dann dem "
 "neuen Wert der Option. Um ein neues Element an eine Liste anzuhängen, fügen "
-"Sie ein führendes :: an den Namen der Liste. (Wenn Ihnen das merkwürdig "
-"vorkommt: Die Geltungsbereichs-Syntax kann nicht auf der Befehlszeile "
-"benutzt werden.)"
+"Sie ein führendes <literal>::</literal> an den Namen der Liste. (Wenn Ihnen "
+"das merkwürdig vorkommt: Die Geltungsbereichs-Syntax kann nicht auf der "
+"Befehlszeile benutzt werden.)"
 
 #. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:133
-msgid ""
-"Note that you can use :: only for appending one item per line to a list and "
-"that you should not use it in combination with the scope syntax.  (The scope "
-"syntax implicit insert ::) Using both syntaxes together will trigger a bug "
-"which some users unfortunately depend on: An option with the unusual name "
-"\"<literal>::</literal>\" which acts like every other option with a name. "
-"These introduces many problems including that a user who writes multiple "
-"lines in this <emphasis>wrong</emphasis> syntax in the hope to append to a "
-"list will gain the opposite as only the last assignment for this option "
-"\"<literal>::</literal>\" will be used. Upcoming APT versions will raise "
-"errors and will stop working if they encounter this misuse, so please "
-"correct such statements now as long as APT doesn't complain explicit about "
-"them."
+#: apt.conf.5.xml:139
+#, fuzzy
+#| msgid ""
+#| "Note that you can use :: only for appending one item per line to a list "
+#| "and that you should not use it in combination with the scope syntax.  "
+#| "(The scope syntax implicit insert ::) Using both syntaxes together will "
+#| "trigger a bug which some users unfortunately depend on: An option with "
+#| "the unusual name \"<literal>::</literal>\" which acts like every other "
+#| "option with a name. These introduces many problems including that a user "
+#| "who writes multiple lines in this <emphasis>wrong</emphasis> syntax in "
+#| "the hope to append to a list will gain the opposite as only the last "
+#| "assignment for this option \"<literal>::</literal>\" will be used. "
+#| "Upcoming APT versions will raise errors and will stop working if they "
+#| "encounter this misuse, so please correct such statements now as long as "
+#| "APT doesn't complain explicit about them."
+msgid ""
+"Note that appending items to a list using <literal>::</literal> only works "
+"for one item per line, and that you should not use it in combination with "
+"the scope syntax (which adds <literal>::</literal> implicitly). Using both "
+"syntaxes together will trigger a bug which some users unfortunately depend "
+"on: an option with the unusual name \"<literal>::</literal>\" which acts "
+"like every other option with a name. This introduces many problems; for one "
+"thing, users who write multiple lines in this <emphasis>wrong</emphasis> "
+"syntax in the hope of appending to a list will achieve the opposite, as only "
+"the last assignment for this option \"<literal>::</literal>\" will be used. "
+"Future versions of APT will raise errors and stop working if they encounter "
+"this misuse, so please correct such statements now while APT doesn't "
+"explicitly complain about them."
 msgstr ""
 "Beachten Sie, dass Sie :: nur benutzen können, um ein Element pro Zeile an "
 "eine Liste anzuhängen und dass Sie es nicht nicht in Verbindung mit einer "
@@ -3475,12 +3519,12 @@ msgstr ""
 "sich APT nicht explizit darüber beklagt."
 
 #. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:145
+#: apt.conf.5.xml:154
 msgid "The APT Group"
 msgstr "Die APT-Gruppe"
 
 #. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:146
+#: apt.conf.5.xml:155
 msgid ""
 "This group of options controls general APT behavior as well as holding the "
 "options for all of the tools."
@@ -3489,7 +3533,7 @@ msgstr ""
 "wie es die Optionen für alle Werkzeuge enthält."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:151
+#: apt.conf.5.xml:160
 msgid ""
 "System Architecture; sets the architecture to use when fetching files and "
 "parsing package lists. The internal default is the architecture apt was "
@@ -3500,16 +3544,26 @@ msgstr ""
 "die Architektur für die APT kompiliert wurde."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:157
-msgid ""
-"All Architectures the system supports. Processors implementing the "
-"<literal>amd64</literal> (also called <literal>x86-64</literal>) instruction "
-"set are e.g. also able to execute binaries compiled for the <literal>i386</"
-"literal> (<literal>x86</literal>) instruction set; This list is use when "
-"fetching files and parsing package lists. The internal default is always the "
-"native architecture (<literal>APT::Architecture</literal>)  and all foreign "
-"architectures it can retrieve by calling <command>dpkg --print-foreign-"
-"architectures</command>."
+#: apt.conf.5.xml:167
+#, fuzzy
+#| msgid ""
+#| "All Architectures the system supports. Processors implementing the "
+#| "<literal>amd64</literal> (also called <literal>x86-64</literal>) "
+#| "instruction set are e.g. also able to execute binaries compiled for the "
+#| "<literal>i386</literal> (<literal>x86</literal>) instruction set; This "
+#| "list is use when fetching files and parsing package lists. The internal "
+#| "default is always the native architecture (<literal>APT::Architecture</"
+#| "literal>)  and all foreign architectures it can retrieve by calling "
+#| "<command>dpkg --print-foreign-architectures</command>."
+msgid ""
+"All Architectures the system supports. For instance, CPUs implementing the "
+"<literal>amd64</literal> (also called <literal>x86-64</literal>)  "
+"instruction set are also able to execute binaries compiled for the "
+"<literal>i386</literal> (<literal>x86</literal>) instruction set. This list "
+"is used when fetching files and parsing package lists. The initial default "
+"is always the system's native architecture (<literal>APT::Architecture</"
+"literal>), and foreign architectures are added to the default list when they "
+"are registered via <command>dpkg --add-architecture</command>."
 msgstr ""
 "alle Architekturen, die das System unterstützt. Prozessoren, die "
 "<literal>amd64</literal>-Befehlssätze implementieren (auch <literal>x86-64</"
@@ -3522,12 +3576,12 @@ msgstr ""
 "architectures</command> abgefragt werden können."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:167
+#: apt.conf.5.xml:180
 msgid ""
-"Default release to install packages from if more than one version available. "
-"Contains release name, codename or release version. Examples: 'stable', "
-"'testing', 'unstable', '&stable-codename;', '&testing-codename;', '4.0', "
-"'5.0*'. See also &apt-preferences;."
+"Default release to install packages from if more than one version is "
+"available. Contains release name, codename or release version. Examples: "
+"'stable', 'testing', 'unstable', '&stable-codename;', '&testing-codename;', "
+"'4.0', '5.0*'. See also &apt-preferences;."
 msgstr ""
 "Standard-Release von dem Pakete installiert werden, wenn mehr als eine "
 "Version verfügbar ist. Enthält Release-Name, Codename oder Release-Version. "
@@ -3535,16 +3589,16 @@ msgstr ""
 "codename;«, »4.0«, »5.0*«. Siehe auch &apt-preferences;."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:173
+#: apt.conf.5.xml:186
 msgid ""
-"Ignore Held packages; This global option causes the problem resolver to "
+"Ignore held packages; this global option causes the problem resolver to "
 "ignore held packages in its decision making."
 msgstr ""
 "Halten von Paketen ignorieren. Diese globale Option veranlasst den "
 "Problemlöser, gehaltene Pakete beim Treffen von Entscheidungen zu ignorieren."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:178
+#: apt.conf.5.xml:191
 msgid ""
 "Defaults to on. When turned on the autoclean feature will remove any "
 "packages which can no longer be downloaded from the cache. If turned off "
@@ -3559,110 +3613,114 @@ msgstr ""
 "Möglichkeiten bereitstellt, um sie erneut zu installieren."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:185
-msgid ""
-"Defaults to on which will cause APT to install essential and important "
-"packages as fast as possible in the install/upgrade operation. This is done "
-"to limit the effect of a failing &dpkg; call: If this option is disabled APT "
-"does treat an important package in the same way as an extra package: Between "
-"the unpacking of the important package A and his configuration can then be "
-"many other unpack or configuration calls, e.g. for package B which has no "
-"relation to A, but causes the dpkg call to fail (e.g. because maintainer "
-"script of package B generates an error) which results in a system state in "
-"which package A is unpacked but unconfigured - each package depending on A "
-"is now no longer guaranteed to work as their dependency on A is not longer "
-"satisfied. The immediate configuration marker is also applied to all "
-"dependencies which can generate a problem if the dependencies e.g. form a "
-"circle as a dependency with the immediate flag is comparable with a Pre-"
-"Dependency. So in theory it is possible that APT encounters a situation in "
-"which it is unable to perform immediate configuration, errors out and refers "
-"to this option so the user can deactivate the immediate configuration "
-"temporarily to be able to perform an install/upgrade again. Note the use of "
-"the word \"theory\" here as this problem was only encountered by now in real "
-"world a few times in non-stable distribution versions and was caused by "
-"wrong dependencies of the package in question or by a system in an already "
-"broken state, so you should not blindly disable this option as the mentioned "
-"scenario above is not the only problem immediate configuration can help to "
-"prevent in the first place.  Before a big operation like <literal>dist-"
-"upgrade</literal> is run with this option disabled it should be tried to "
-"explicitly <literal>install</literal> the package APT is unable to configure "
-"immediately, but please make sure to report your problem also to your "
-"distribution and to the APT team with the buglink below so they can work on "
-"improving or correcting the upgrade process."
-msgstr ""
-"standardmäßig »on«, wodurch APT veranlasst wird, »essential«- oder "
-"»important«-Pakete so schnell wie möglich in der »install«-/»upgrade«-"
-"Operation zu installieren. Dies wird getan, um den Effekt eines "
-"gescheiterterten &dpkg;-Aufrufs zu begrenzen: Wenn diese Option "
-"ausgeschaltet ist, behandelt APT ein »important«-Paket auf die gleiche Weise "
-"wie ein »extra«-Paket: Zwischen dem Entpacken des »important«-Pakets A und "
-"seiner Konfiguration können dann viele andere Entpack- oder "
-"Konfigurationsaufrufe liegen, z.B. für Paket B, das keine Beziehung zu A "
-"hat, aber den dpkg-Aufruf zum Scheitern bringt (z.B. weil das Betreuerskript "
-"von Paket B Fehler generiert), die als Ergebnis einen Systemstatus haben, in "
-"dem Paket A entpackt, aber nicht konfiguriert ist und für kein von A "
-"abhängendes Paket länger gewährleistet ist, dass es funktioniert, weil die "
-"Abhängigkeit zu A nicht länger befriedigt wird. Das unmittelbare "
-"Konfigurationskennzeichen wird außerdem auf alle Abhängigkeiten angewandt, "
-"was zu einem Problem führen könnten, falls die Abhängigkeiten z.B. einen "
-"Kreis bilden, so dass eine Abhängigkeit mit der Unmittelbarmarkierung mit "
-"einer Vorabhängigkeit vergleichbar ist. So ist es theoretisch möglich, dass "
-"APT einer Situation begegnet, in der keine unmittelbare Konfiguration "
-"durchgeführt, ein Fehler ausgegeben und sich auf diese Option bezogen werden "
-"kann, so dass der Anwender die unmittelbare Konfiguration zeitweise "
-"deaktivieren kann, um in der Lage zu sein, erneut ein »install«/»upgrade« "
-"durchzuführen. Beachten Sie, dass hier das Wort »theoretisch« benutzt wird, "
-"denn dieses Problem ist bis jetzt in der Realität nur ein paar mal in "
-"unstabilen Distributionsversionen aufgetreten und wurde durch falsche "
-"Abhängigkeiten des fraglichen Pakets ausgelöst oder durch ein System in "
-"bereits kaputtem Status, so dass Sie diese Option nicht unbesehen abschalten "
-"sollten, da das oben erwähnte Szenario nicht das einzige unmittelbare "
-"Problem ist, das die Konfiguration überhaupt verhindern sollte. Bevor eine "
-"große Operation wie <literal>dist-upgrade</literal> mit dieser "
-"ausgeschalteten Option ausgeführt wird, sollte explizit versucht werden, "
-"<literal>install</literal> des Pakets durchzuführen. APT ist nicht in der "
-"Lage unmittelbar zu konfigurieren, aber stellen Sie sicher, dass Sie Ihr "
-"Problem außerdem an Ihre Distribution und an das APT-Team berichten mit "
-"nachstehendem Fehlerverweis, so dass es am Verbessern oder Korrigieren des "
-"Upgrade-Prozesses arbeiten kann."
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:208
-msgid ""
-"Never Enable this option unless you -really- know what you are doing. It "
-"permits APT to temporarily remove an essential package to break a Conflicts/"
-"Conflicts or Conflicts/Pre-Depend loop between two essential packages. SUCH "
-"A LOOP SHOULD NEVER EXIST AND IS A GRAVE BUG. This option will work if the "
-"essential packages are not tar, gzip, libc, dpkg, bash or anything that "
-"those packages depend on."
-msgstr ""
-"Schalten Sie diese Option niemals ein, außer wenn Sie -wirklich- wissen, was "
-"Sie tun. Es erlaubt APT temporär ein essentielles Paket zu entfernen, um "
-"eine Conflicts/Conflicts- oder Conflicts/Pre-Depend-Schleife zwischen zwei "
-"essentiellen Paketen zu unterbrechen. SOLCH EINE SCHLEIFE SOLLTE NIEMALS "
-"EXISTIEREN UND IST EIN SCHWERWIEGENDER FEHLER. Diese Option wird "
-"funktionieren, wenn die essentiellen Pakete nicht tar, gzip, libc, dpkg, "
-"bash oder etwas, was davon abhängt, sind."
-
-# FIXME s/These value/This value/

-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:217
+#: apt.conf.5.xml:199
+msgid ""
+"Defaults to on, which will cause APT to install essential and important "
+"packages as soon as possible in an install/upgrade operation, in order to "
+"limit the effect of a failing &dpkg; call. If this option is disabled, APT "
+"treats an important package in the same way as an extra package: between the "
+"unpacking of the package A and its configuration there can be many other "
+"unpack or configuration calls for other unrelated packages B, C etc. If "
+"these cause the &dpkg; call to fail (e.g. because package B's maintainer "
+"scripts generate an error), this results in a system state in which package "
+"A is unpacked but unconfigured - so any package depending on A is now no "
+"longer guaranteed to work, as its dependency on A is no longer satisfied."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:211
+msgid ""
+"The immediate configuration marker is also applied in the potentially "
+"problematic case of circular dependencies, since a dependency with the "
+"immediate flag is equivalent to a Pre-Dependency. In theory this allows APT "
+"to recognise a situation in which it is unable to perform immediate "
+"configuration, abort, and suggest to the user that the option should be "
+"temporarily deactivated in order to allow the operation to proceed.  Note "
+"the use of the word \"theory\" here; in the real world this problem has "
+"rarely been encountered, in non-stable distribution versions, and was caused "
+"by wrong dependencies of the package in question or by a system in an "
+"already broken state; so you should not blindly disable this option, as the "
+"scenario mentioned above is not the only problem it can help to prevent in "
+"the first place."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:224
+msgid ""
+"Before a big operation like <literal>dist-upgrade</literal> is run with this "
+"option disabled you should try to explicitly <literal>install</literal> the "
+"package APT is unable to configure immediately; but please make sure you "
+"also report your problem to your distribution and to the APT team with the "
+"buglink below, so they can work on improving or correcting the upgrade "
+"process."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:235
+#, fuzzy
+#| msgid ""
+#| "Never Enable this option unless you -really- know what you are doing. It "
+#| "permits APT to temporarily remove an essential package to break a "
+#| "Conflicts/Conflicts or Conflicts/Pre-Depend loop between two essential "
+#| "packages. SUCH A LOOP SHOULD NEVER EXIST AND IS A GRAVE BUG. This option "
+#| "will work if the essential packages are not tar, gzip, libc, dpkg, bash "
+#| "or anything that those packages depend on."
+msgid ""
+"Never enable this option unless you <emphasis>really</emphasis> know what "
+"you are doing. It permits APT to temporarily remove an essential package to "
+"break a Conflicts/Conflicts or Conflicts/Pre-Depends loop between two "
+"essential packages. <emphasis>Such a loop should never exist and is a grave "
+"bug</emphasis>. This option will work if the essential packages are not "
+"<command>tar</command>, <command>gzip</command>, <command>libc</command>, "
+"<command>dpkg</command>, <command>dash</command> or anything that those "
+"packages depend on."
+msgstr ""
+"Schalten Sie diese Option niemals ein, außer wenn Sie <emphasis>wirklich</"
+"emphasis> wissen, was Sie tun. Es erlaubt APT temporär ein essentielles "
+"Paket zu entfernen, um eine Conflicts/Conflicts- oder Conflicts/Pre-Depends-"
+"Schleife zwischen zwei essentiellen Paketen zu unterbrechen. <emphasis>Solch "
+"eine Schleife sollte niemals existieren und ist ein schwerwiegender Fehler</"
+"emphasis>. Diese Option wird funktionieren, wenn die essentiellen Pakete "
+"nicht <command>tar</command>, <command>gzip</command>, <command>libc</"
+"command>, <command>dpkg</command>, <command>dash</command> oder etwas, was "
+"davon abhängt, sind."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:247
+#, fuzzy
+#| msgid ""
+#| "APT uses since version 0.7.26 a resizable memory mapped cache file to "
+#| "store the 'available' information. <literal>Cache-Start</literal> acts as "
+#| "a hint to which size the Cache will grow and is therefore the amount of "
+#| "memory APT will request at startup. The default value is 20971520 bytes "
+#| "(~20 MB). Note that this amount of space needs to be available for APT "
+#| "otherwise it will likely fail ungracefully, so for memory restricted "
+#| "devices this value should be lowered while on systems with a lot of "
+#| "configured sources it should be increased.  <literal>Cache-Grow</literal> "
+#| "defines in bytes with the default of 1048576 (~1 MB) how much the Cache "
+#| "size will be increased in the event the space defined by <literal>Cache-"
+#| "Start</literal> is not enough. These value will be applied again and "
+#| "again until either the cache is big enough to store all information or "
+#| "the size of the cache reaches the <literal>Cache-Limit</literal>.  The "
+#| "default of <literal>Cache-Limit</literal> is 0 which stands for no "
+#| "limit.  If <literal>Cache-Grow</literal> is set to 0 the automatic grow "
+#| "of the cache is disabled."
 msgid ""
 "APT uses since version 0.7.26 a resizable memory mapped cache file to store "
-"the 'available' information. <literal>Cache-Start</literal> acts as a hint "
-"to which size the Cache will grow and is therefore the amount of memory APT "
+"the available information. <literal>Cache-Start</literal> acts as a hint of "
+"the size the cache will grow to, and is therefore the amount of memory APT "
 "will request at startup. The default value is 20971520 bytes (~20 MB). Note "
-"that this amount of space needs to be available for APT otherwise it will "
+"that this amount of space needs to be available for APT; otherwise it will "
 "likely fail ungracefully, so for memory restricted devices this value should "
 "be lowered while on systems with a lot of configured sources it should be "
 "increased.  <literal>Cache-Grow</literal> defines in bytes with the default "
-"of 1048576 (~1 MB) how much the Cache size will be increased in the event "
-"the space defined by <literal>Cache-Start</literal> is not enough. These "
+"of 1048576 (~1 MB) how much the cache size will be increased in the event "
+"the space defined by <literal>Cache-Start</literal> is not enough. This "
 "value will be applied again and again until either the cache is big enough "
 "to store all information or the size of the cache reaches the <literal>Cache-"
 "Limit</literal>.  The default of <literal>Cache-Limit</literal> is 0 which "
 "stands for no limit.  If <literal>Cache-Grow</literal> is set to 0 the "
-"automatic grow of the cache is disabled."
+"automatic growth of the cache is disabled."
 msgstr ""
 "APT benutzt seit Version 0.7.26 eine Zwischenspeicherdatei für "
 "Speicherabbilder mit veränderlicher Größe um »verfügbare« Informationen zu "
@@ -3683,16 +3741,19 @@ msgstr ""
 "auf 0 gesetzt ist, kann der Zwischenspeicher nicht automatisch wachsen."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:233
-msgid "Defines which package(s) are considered essential build dependencies."
+#: apt.conf.5.xml:263
+#, fuzzy
+#| msgid ""
+#| "Defines which package(s) are considered essential build dependencies."
+msgid "Defines which packages are considered essential build dependencies."
 msgstr ""
 "definiert, welche(s) Paket(e) als essentielle Bauabhängigkeiten betrachtet "
 "werden."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:237
+#: apt.conf.5.xml:267
 msgid ""
-"The Get subsection controls the &apt-get; tool, please see its documentation "
+"The Get subsection controls the &apt-get; tool; please see its documentation "
 "for more information about the options here."
 msgstr ""
 "Der Get-Unterabschnitt steuert das &apt-get;-Werkzeug. Lesen Sie bitte "
@@ -3700,9 +3761,9 @@ msgstr ""
 "erhalten."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:242
+#: apt.conf.5.xml:272
 msgid ""
-"The Cache subsection controls the &apt-cache; tool, please see its "
+"The Cache subsection controls the &apt-cache; tool; please see its "
 "documentation for more information about the options here."
 msgstr ""
 "Der Cache-Unterabschnitt steuert das &apt-cache;-Werkzeug. Lesen Sie bitte "
@@ -3710,9 +3771,9 @@ msgstr ""
 "erhalten."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:247
+#: apt.conf.5.xml:277
 msgid ""
-"The CDROM subsection controls the &apt-cdrom; tool, please see its "
+"The CDROM subsection controls the &apt-cdrom; tool; please see its "
 "documentation for more information about the options here."
 msgstr ""
 "Der CDROM-Unterabschnitt steuert das &apt-cdrom;-Werkzeug. Lesen Sie bitte "
@@ -3720,29 +3781,44 @@ msgstr ""
 "erhalten."
 
 #. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:253
+#: apt.conf.5.xml:283
 msgid "The Acquire Group"
 msgstr "Die Erwerbgruppe"
 
 #. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:254
+#: apt.conf.5.xml:284
+#, fuzzy
+#| msgid ""
+#| "The <literal>Acquire</literal> group of options controls the download of "
+#| "packages and the URI handlers."
 msgid ""
 "The <literal>Acquire</literal> group of options controls the download of "
-"packages and the URI handlers."
+"packages as well as the various \"acquire methods\" responsible for the "
+"download itself (see also &sources-list;)."
 msgstr ""
 "Die <literal>Acquire</literal>-Gruppe der Optionen steuert das Herunterladen "
 "von Paketen und die URI-Steuerprogramme."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:259
-msgid ""
-"Security related option defaulting to true as an expiring validation for a "
-"Release file prevents longtime replay attacks and can e.g. also help users "
-"to identify no longer updated mirrors - but the feature depends on the "
-"correctness of the time on the user system.  Archive maintainers are "
-"encouraged to create Release files with the <literal>Valid-Until</literal> "
-"header, but if they don't or a stricter value is volitional the following "
-"<literal>Max-ValidTime</literal> option can be used."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:291
+#, fuzzy
+#| msgid ""
+#| "Security related option defaulting to true as an expiring validation for "
+#| "a Release file prevents longtime replay attacks and can e.g. also help "
+#| "users to identify no longer updated mirrors - but the feature depends on "
+#| "the correctness of the time on the user system.  Archive maintainers are "
+#| "encouraged to create Release files with the <literal>Valid-Until</"
+#| "literal> header, but if they don't or a stricter value is volitional the "
+#| "following <literal>Max-ValidTime</literal> option can be used."
+msgid ""
+"Security related option defaulting to true, as giving a Release file's "
+"validation an expiration date prevents replay attacks over a long timescale, "
+"and can also for example help users to identify mirrors that are no longer "
+"updated - but the feature depends on the correctness of the clock on the "
+"user system. Archive maintainers are encouraged to create Release files with "
+"the <literal>Valid-Until</literal> header, but if they don't or a stricter "
+"value is desired the <literal>Max-ValidTime</literal> option below can be "
+"used."
 msgstr ""
 "Die sicherheitsbezogene Option wird als »true« vorgegeben, da eine "
 "verfallende Überprüfung für eine Release-Datei langzeitige "
@@ -3754,15 +3830,25 @@ msgstr ""
 "ein strengerer Wert gewollt ist, kann die Option <literal>Max-ValidTime</"
 "literal> benutzt werden."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:270
-msgid ""
-"Seconds the Release file should be considered valid after it was created "
-"(indicated by the <literal>Date</literal> header).  If the Release file "
-"itself includes a <literal>Valid-Until</literal> header the earlier date of "
-"the two is used as the expiration date.  The default value is <literal>0</"
-"literal> which stands for \"for ever valid\".  Archive specific settings can "
-"be made by appending the label of the archive to the option name."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:304
+#, fuzzy
+#| msgid ""
+#| "Seconds the Release file should be considered valid after it was created "
+#| "(indicated by the <literal>Date</literal> header).  If the Release file "
+#| "itself includes a <literal>Valid-Until</literal> header the earlier date "
+#| "of the two is used as the expiration date.  The default value is "
+#| "<literal>0</literal> which stands for \"for ever valid\".  Archive "
+#| "specific settings can be made by appending the label of the archive to "
+#| "the option name."
+msgid ""
+"Maximum time (in seconds) after its creation (as indicated by the "
+"<literal>Date</literal> header) that the <filename>Release</filename> file "
+"should be considered valid.  If the Release file itself includes a "
+"<literal>Valid-Until</literal> header the earlier date of the two is used as "
+"the expiration date.  The default value is <literal>0</literal> which stands "
+"for \"valid forever\".  Archive specific settings can be made by appending "
+"the label of the archive to the option name."
 msgstr ""
 "Sekunden, die die Release-Datei als gültig betrachtet werden sollte, nachdem "
 "sie erzeugt wurde (angezeigt durch die Kopfzeile <literal>Date</literal>). "
@@ -3772,15 +3858,25 @@ msgstr ""
 "Archivspezifische Einstellungen können durch Anhängen des Archivetiketts an "
 "den Optionsnamen vorgenommen werden."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:281
-msgid ""
-"Minimum of seconds the Release file should be considered valid after it was "
-"created (indicated by the <literal>Date</literal> header).  Use this if you "
-"need to use a seldomly updated (local) mirror of a more regular updated "
-"archive with a <literal>Valid-Until</literal> header instead of completely "
-"disabling the expiration date checking.  Archive specific settings can and "
-"should be used by appending the label of the archive to the option name."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:316
+#, fuzzy
+#| msgid ""
+#| "Minimum of seconds the Release file should be considered valid after it "
+#| "was created (indicated by the <literal>Date</literal> header).  Use this "
+#| "if you need to use a seldomly updated (local) mirror of a more regular "
+#| "updated archive with a <literal>Valid-Until</literal> header instead of "
+#| "completely disabling the expiration date checking.  Archive specific "
+#| "settings can and should be used by appending the label of the archive to "
+#| "the option name."
+msgid ""
+"Minimum time (in seconds) after its creation (as indicated by the "
+"<literal>Date</literal> header) that the <filename>Release</filename> file "
+"should be considered valid.  Use this if you need to use a seldom updated "
+"(local) mirror of a more frequently updated archive with a <literal>Valid-"
+"Until</literal> header instead of completely disabling the expiration date "
+"checking.  Archive specific settings can and should be used by appending the "
+"label of the archive to the option name."
 msgstr ""
 "minimale Anzahl der Sekunden, die die Release-Datei als gültig betrachtet "
 "werden sollte, nachdem sie erzeugt wurde (angezeigt durch die Kopfzeile "
@@ -3791,25 +3887,38 @@ msgstr ""
 "Einstellungen können und sollten durch Anhängen des Archivetiketts an den "
 "Optionsnamen vorgenommen werden."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:292
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:328
+#, fuzzy
+#| msgid ""
+#| "Try to download deltas called <literal>PDiffs</literal> for Packages or "
+#| "Sources files instead of downloading whole ones. True by default."
 msgid ""
-"Try to download deltas called <literal>PDiffs</literal> for Packages or "
-"Sources files instead of downloading whole ones. True by default."
+"Try to download deltas called <literal>PDiffs</literal> for indexes (like "
+"<filename>Packages</filename> files) instead of downloading whole ones. True "
+"by default."
 msgstr ""
 "versucht Deltas, die <literal>PDiffs</literal> genannt werden, für Paket- "
 "oder Quelldateien herunterzuladen, statt der kompletten Dateien. Vorgabe ist "
 "True."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:295
-msgid ""
-"Two sub-options to limit the use of PDiffs are also available: With "
-"<literal>FileLimit</literal> can be specified how many PDiff files are "
-"downloaded at most to update a file. <literal>SizeLimit</literal> on the "
-"other hand is the maximum percentage of the size of all patches compared to "
-"the size of the targeted file. If one of these limits is exceeded the "
-"complete file is downloaded instead of the patches."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:331
+#, fuzzy
+#| msgid ""
+#| "Two sub-options to limit the use of PDiffs are also available: With "
+#| "<literal>FileLimit</literal> can be specified how many PDiff files are "
+#| "downloaded at most to update a file. <literal>SizeLimit</literal> on the "
+#| "other hand is the maximum percentage of the size of all patches compared "
+#| "to the size of the targeted file. If one of these limits is exceeded the "
+#| "complete file is downloaded instead of the patches."
+msgid ""
+"Two sub-options to limit the use of PDiffs are also available: "
+"<literal>FileLimit</literal> can be used to specify a maximum number of "
+"PDiff files should be downloaded to update a file. <literal>SizeLimit</"
+"literal> on the other hand is the maximum percentage of the size of all "
+"patches compared to the size of the targeted file. If one of these limits is "
+"exceeded the complete file is downloaded instead of the patches."
 msgstr ""
 "Es sind außerdem zwei Unteroptionen verfügbar, um die Benutzung von PDiffs "
 "zu begrenzen: Mit <literal>FileLimit</literal> kann angegeben werden, wie "
@@ -3819,8 +3928,8 @@ msgstr ""
 "dieser Begrenzungen überschritten wird, wird die komplette Datei anstelle "
 "der Patche heruntergeladen."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:305
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:341
 msgid ""
 "Queuing mode; <literal>Queue-Mode</literal> can be one of <literal>host</"
 "literal> or <literal>access</literal> which determines how APT parallelizes "
@@ -3835,8 +3944,8 @@ msgstr ""
 "geöffnet wird, <literal>access</literal> bedeutet, dass eine Verbindung pro "
 "URI-Art geöffnet wird."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:313
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:349
 msgid ""
 "Number of retries to perform. If this is non-zero APT will retry failed "
 "files the given number of times."
@@ -3844,8 +3953,8 @@ msgstr ""
 "Anzahl der auszuführenden erneuten Versuche. Wenn dies nicht Null ist, wird "
 "APT fehlgeschlagene Dateien in der angegebenen Zahl erneut versuchen."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:318
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:354
 msgid ""
 "Use symlinks for source archives. If set to true then source archives will "
 "be symlinked when possible instead of copying. True is the default."
@@ -3854,15 +3963,24 @@ msgstr ""
 "ist, werden Quellarchive, wenn möglich, symbolisch verknüpft, anstatt "
 "kopiert zu werden. True ist die Vorgabe."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:323
-msgid ""
-"HTTP URIs; http::Proxy is the default http proxy to use. It is in the "
-"standard form of <literal>http://[[user][:pass]@]host[:port]/</literal>. Per "
-"host proxies can also be specified by using the form <literal>http::Proxy::"
-"&lt;host&gt;</literal> with the special keyword <literal>DIRECT</literal> "
-"meaning to use no proxies. If no one of the above settings is specified, "
-"<envar>http_proxy</envar> environment variable will be used."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:359
+#, fuzzy
+#| msgid ""
+#| "HTTP URIs; http::Proxy is the default http proxy to use. It is in the "
+#| "standard form of <literal>http://[[user][:pass]@]host[:port]/</literal>. "
+#| "Per host proxies can also be specified by using the form <literal>http::"
+#| "Proxy::&lt;host&gt;</literal> with the special keyword <literal>DIRECT</"
+#| "literal> meaning to use no proxies. If no one of the above settings is "
+#| "specified, <envar>http_proxy</envar> environment variable will be used."
+msgid ""
+"<literal>http::Proxy</literal> sets the default proxy to use for HTTP URIs. "
+"It is in the standard form of <literal>http://[[user][:pass]@]host[:port]/</"
+"literal>.  Per host proxies can also be specified by using the form "
+"<literal>http::Proxy::&lt;host&gt;</literal> with the special keyword "
+"<literal>DIRECT</literal> meaning to use no proxies. If no one of the above "
+"settings is specified, <envar>http_proxy</envar> environment variable will "
+"be used."
 msgstr ""
 "HTTP-URIs; http::Proxy ist der zu benutzende Standard-HTTP-Proxy. Er wird "
 "standardmäßig in der Form <literal>http://[[Anwender][:Passwort]@]Host[:"
@@ -3872,18 +3990,27 @@ msgstr ""
 "benutzt werden. Falls keine der obigen Einstellungen angegeben wurde, wird "
 "die Umgebungsvariable <envar>http_proxy</envar> benutzt."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:331
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:367
+#, fuzzy
+#| msgid ""
+#| "Three settings are provided for cache control with HTTP/1.1 compliant "
+#| "proxy caches. <literal>No-Cache</literal> tells the proxy to not use its "
+#| "cached response under any circumstances, <literal>Max-Age</literal> is "
+#| "sent only for index files and tells the cache to refresh its object if it "
+#| "is older than the given number of seconds. Debian updates its index files "
+#| "daily so the default is 1 day. <literal>No-Store</literal> specifies that "
+#| "the cache should never store this request, it is only set for archive "
+#| "files. This may be useful to prevent polluting a proxy cache with very "
+#| "large .deb files. Note: Squid 2.0.2 does not support any of these options."
 msgid ""
 "Three settings are provided for cache control with HTTP/1.1 compliant proxy "
-"caches. <literal>No-Cache</literal> tells the proxy to not use its cached "
-"response under any circumstances, <literal>Max-Age</literal> is sent only "
-"for index files and tells the cache to refresh its object if it is older "
-"than the given number of seconds. Debian updates its index files daily so "
-"the default is 1 day. <literal>No-Store</literal> specifies that the cache "
-"should never store this request, it is only set for archive files. This may "
-"be useful to prevent polluting a proxy cache with very large .deb files. "
-"Note: Squid 2.0.2 does not support any of these options."
+"caches.  <literal>No-Cache</literal> tells the proxy not to use its cached "
+"response under any circumstances.  <literal>Max-Age</literal> sets the "
+"allowed maximum age (in seconds) of an index file in the cache of the "
+"proxy.  <literal>No-Store</literal> specifies that the proxy should not "
+"store the requested archive files in its cache, which can be used to prevent "
+"the proxy from polluting its cache with (big) .deb files."
 msgstr ""
 "Für die Steuerung des Zwischenspeichers mit HTTP/1.1-konformen Proxy-"
 "Zwischenspeichern stehen drei Einstellungen zur Verfügung. <literal>No-"
@@ -3898,23 +4025,27 @@ msgstr ""
 "mit sehr großen .deb-Dateien zu verhindern. Beachten Sie: Squid 2.0.2 "
 "unterstützt keine dieser Optionen."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:341 apt.conf.5.xml:407
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:377 apt.conf.5.xml:449
+#, fuzzy
+#| msgid ""
+#| "The option <literal>timeout</literal> sets the timeout timer used by the "
+#| "method; this applies to all things including connection timeout and data "
+#| "timeout."
 msgid ""
 "The option <literal>timeout</literal> sets the timeout timer used by the "
-"method, this applies to all things including connection timeout and data "
-"timeout."
+"method; this value applies to the connection as well as the data timeout."
 msgstr ""
 "Die Option <literal>timeout</literal> stellt den Zeitnehmer für die "
 "Zeitüberschreitung ein, die von der Methode benutzt wird. Dies wird auf alle "
 "Dinge, einschließlich Verbindungs- und Datenzeitüberschreitungen, angewandt."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:344
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:380
 msgid ""
 "The setting <literal>Acquire::http::Pipeline-Depth</literal> can be used to "
-"enabled HTTP pipeling (RFC 2616 section 8.1.2.2) which can be beneficial e."
-"g. on high-latency connections. It specifies how many requests are send in a "
+"enable HTTP pipelining (RFC 2616 section 8.1.2.2) which can be beneficial e."
+"g. on high-latency connections. It specifies how many requests are sent in a "
 "pipeline.  Previous APT versions had a default of 10 for this setting, but "
 "the default value is now 0 (= disabled) to avoid problems with the ever-"
 "growing amount of webservers and proxies which choose to not conform to the "
@@ -3929,23 +4060,30 @@ msgstr ""
 "anwachsenden Zahl von Webservern und Proxies zu vermeiden, die nicht der "
 "HTTP/1.1-Spezifikation entsprechen."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:351
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:387
 msgid ""
-"<literal>Acquire::http::AllowRedirect</literal> controls if APT will follow "
-"redirects, which is enabled by default."
+"<literal>Acquire::http::AllowRedirect</literal> controls whether APT will "
+"follow redirects, which is enabled by default."
 msgstr ""
 "<literal>Acquire::http::AllowRedirect</literal> steuert, ob APT Umleitungen "
 "folgen wird, was standardmäßig aktiviert ist."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:354
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:390
+#, fuzzy
+#| msgid ""
+#| "The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</"
+#| "literal> which accepts integer values in kilobytes. The default value is "
+#| "0 which deactivates the limit and tries uses as much as possible of the "
+#| "bandwidth (Note that this option implicit deactivates the download from "
+#| "multiple servers at the same time.)"
 msgid ""
 "The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</"
-"literal> which accepts integer values in kilobyte. The default value is 0 "
-"which deactivates the limit and tries uses as much as possible of the "
-"bandwidth (Note that this option implicit deactivates the download from "
-"multiple servers at the same time.)"
+"literal> which accepts integer values in kilobytes. The default value is 0 "
+"which deactivates the limit and tries to use all available bandwidth (note "
+"that this option implicitly disables downloading from multiple servers at "
+"the same time.)"
 msgstr ""
 "Die benutzte Bandbreite kann durch <literal>Acquire::http::Dl-Limit</"
 "literal> eingeschränkt werden, was Ganzzahlwerte in Kilobyte akzeptiert. Der "
@@ -3954,8 +4092,8 @@ msgstr ""
 "implizit das Herunterladen von mehreren Servern zur gleichen Zeit "
 "deaktiviert.)"
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:359
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:395
 msgid ""
 "<literal>Acquire::http::User-Agent</literal> can be used to set a different "
 "User-Agent for the http download method as some proxies allow access for "
@@ -3966,14 +4104,22 @@ msgstr ""
 "einige Proxys den Clients nur dann Zugriff gewähren, wenn der Client einen "
 "bekannten Bezeichner verwendet."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:366
-msgid ""
-"HTTPS URIs. Cache-control, Timeout, AllowRedirect, Dl-Limit and proxy "
-"options are the same as for <literal>http</literal> method and will also "
-"default to the options from the <literal>http</literal> method if they are "
-"not explicitly set for https. <literal>Pipeline-Depth</literal> option is "
-"not supported yet."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:403
+#, fuzzy
+#| msgid ""
+#| "HTTPS URIs. Cache-control, Timeout, AllowRedirect, Dl-Limit and proxy "
+#| "options are the same as for <literal>http</literal> method and will also "
+#| "default to the options from the <literal>http</literal> method if they "
+#| "are not explicitly set for https. <literal>Pipeline-Depth</literal> "
+#| "option is not supported yet."
+msgid ""
+"The <literal>Cache-control</literal>, <literal>Timeout</literal>, "
+"<literal>AllowRedirect</literal>, <literal>Dl-Limit</literal> and "
+"<literal>proxy</literal> options work for HTTPS URIs in the same way as for "
+"the <literal>http</literal> method, and default to the same values if they "
+"are not explicitly set. The <literal>Pipeline-Depth</literal> option is not "
+"yet supported."
 msgstr ""
 "HTTPS-URIs. Zwischenspeichersteuerung-, Zeitüberschreitung-, AllowRedirect-, "
 "Dl-Limit- und Proxy-Optionen entsprechen denen der <literal>http</literal>-"
@@ -3981,25 +4127,44 @@ msgstr ""
 "vorgegeben, falls sie nicht explizit für HTTPS gesetzt sind. Die Option "
 "<literal>Pipeline-Depth</literal> wird noch nicht unterstützt."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:372
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:411
+#, fuzzy
+#| msgid ""
+#| "<literal>CaInfo</literal> suboption specifies place of file that holds "
+#| "info about trusted certificates.  <literal>&lt;host&gt;::CaInfo</literal> "
+#| "is the corresponding per-host option.  <literal>Verify-Peer</literal> "
+#| "boolean suboption determines whether verify server's host certificate "
+#| "against trusted certificates or not.  <literal>&lt;host&gt;::Verify-Peer</"
+#| "literal> is the corresponding per-host option.  <literal>Verify-Host</"
+#| "literal> boolean suboption determines whether verify server's hostname or "
+#| "not.  <literal>&lt;host&gt;::Verify-Host</literal> is the corresponding "
+#| "per-host option.  <literal>SslCert</literal> determines what certificate "
+#| "to use for client authentication. <literal>&lt;host&gt;::SslCert</"
+#| "literal> is the corresponding per-host option.  <literal>SslKey</literal> "
+#| "determines what private key to use for client authentication. "
+#| "<literal>&lt;host&gt;::SslKey</literal> is the corresponding per-host "
+#| "option.  <literal>SslForceVersion</literal> overrides default SSL version "
+#| "to use.  Can contain 'TLSv1' or 'SSLv3' string.  <literal>&lt;host&gt;::"
+#| "SslForceVersion</literal> is the corresponding per-host option."
 msgid ""
 "<literal>CaInfo</literal> suboption specifies place of file that holds info "
-"about trusted certificates.  <literal>&lt;host&gt;::CaInfo</literal> is "
+"about trusted certificates.  <literal>&lt;host&gt;::CaInfo</literal> is the "
 "corresponding per-host option.  <literal>Verify-Peer</literal> boolean "
-"suboption determines whether verify server's host certificate against "
-"trusted certificates or not.  <literal>&lt;host&gt;::Verify-Peer</literal> "
-"is corresponding per-host option.  <literal>Verify-Host</literal> boolean "
-"suboption determines whether verify server's hostname or not.  <literal>&lt;"
-"host&gt;::Verify-Host</literal> is corresponding per-host option.  "
-"<literal>SslCert</literal> determines what certificate to use for client "
-"authentication. <literal>&lt;host&gt;::SslCert</literal> is corresponding "
-"per-host option.  <literal>SslKey</literal> determines what private key to "
-"use for client authentication. <literal>&lt;host&gt;::SslKey</literal> is "
-"corresponding per-host option.  <literal>SslForceVersion</literal> overrides "
-"default SSL version to use.  Can contain 'TLSv1' or 'SSLv3' string.  "
-"<literal>&lt;host&gt;::SslForceVersion</literal> is corresponding per-host "
-"option."
+"suboption determines whether or not the server's host certificate should be "
+"verified against trusted certificates.  <literal>&lt;host&gt;::Verify-Peer</"
+"literal> is the corresponding per-host option.  <literal>Verify-Host</"
+"literal> boolean suboption determines whether or not the server's hostname "
+"should be verified.  <literal>&lt;host&gt;::Verify-Host</literal> is the "
+"corresponding per-host option.  <literal>SslCert</literal> determines what "
+"certificate to use for client authentication. <literal>&lt;host&gt;::"
+"SslCert</literal> is the corresponding per-host option.  <literal>SslKey</"
+"literal> determines what private key to use for client authentication. "
+"<literal>&lt;host&gt;::SslKey</literal> is the corresponding per-host "
+"option.  <literal>SslForceVersion</literal> overrides default SSL version to "
+"use.  It can contain either of the strings '<literal>TLSv1</literal>' or "
+"'<literal>SSLv3</literal>'.  <literal>&lt;host&gt;::SslForceVersion</"
+"literal> is the corresponding per-host option."
 msgstr ""
 "Die Unteroption <literal>CaInfo</literal> gibt den Ort an, an dem "
 "Informationen über vertrauenswürdige Zertifikate bereitgehalten werden. "
@@ -4020,23 +4185,39 @@ msgstr ""
 "Zeichenketten »TLSv1« oder »SSLv3« enthalten. <literal>&lt;host&gt;::"
 "SslForceVersion</literal> ist die entsprechende per-Host-Option."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:391
-msgid ""
-"FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the standard "
-"form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. Per host "
-"proxies can also be specified by using the form <literal>ftp::Proxy::&lt;"
-"host&gt;</literal> with the special keyword <literal>DIRECT</literal> "
-"meaning to use no proxies. If no one of the above settings is specified, "
-"<envar>ftp_proxy</envar> environment variable will be used. To use a ftp "
-"proxy you will have to set the <literal>ftp::ProxyLogin</literal> script in "
-"the configuration file. This entry specifies the commands to send to tell "
-"the proxy server what to connect to. Please see &configureindex; for an "
-"example of how to do this. The substitution variables available are <literal>"
-"$(PROXY_USER)</literal> <literal>$(PROXY_PASS)</literal> <literal>"
-"$(SITE_USER)</literal> <literal>$(SITE_PASS)</literal> <literal>$(SITE)</"
-"literal> and <literal>$(SITE_PORT)</literal> Each is taken from it's "
-"respective URI component."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:432
+#, fuzzy
+#| msgid ""
+#| "FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the "
+#| "standard form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. "
+#| "Per host proxies can also be specified by using the form <literal>ftp::"
+#| "Proxy::&lt;host&gt;</literal> with the special keyword <literal>DIRECT</"
+#| "literal> meaning to use no proxies. If no one of the above settings is "
+#| "specified, <envar>ftp_proxy</envar> environment variable will be used. To "
+#| "use a ftp proxy you will have to set the <literal>ftp::ProxyLogin</"
+#| "literal> script in the configuration file. This entry specifies the "
+#| "commands to send to tell the proxy server what to connect to. Please see "
+#| "&configureindex; for an example of how to do this. The substitution "
+#| "variables available are <literal>$(PROXY_USER)</literal> <literal>"
+#| "$(PROXY_PASS)</literal> <literal>$(SITE_USER)</literal> <literal>"
+#| "$(SITE_PASS)</literal> <literal>$(SITE)</literal> and <literal>"
+#| "$(SITE_PORT)</literal> Each is taken from it's respective URI component."
+msgid ""
+"<literal>ftp::Proxy</literal> sets the default proxy to use for FTP URIs.  "
+"It is in the standard form of <literal>ftp://[[user][:pass]@]host[:port]/</"
+"literal>.  Per host proxies can also be specified by using the form "
+"<literal>ftp::Proxy::&lt;host&gt;</literal> with the special keyword "
+"<literal>DIRECT</literal> meaning to use no proxies. If no one of the above "
+"settings is specified, <envar>ftp_proxy</envar> environment variable will be "
+"used. To use an FTP proxy you will have to set the <literal>ftp::ProxyLogin</"
+"literal> script in the configuration file. This entry specifies the commands "
+"to send to tell the proxy server what to connect to. Please see "
+"&configureindex; for an example of how to do this. The substitution "
+"variables representing the corresponding URI component are <literal>"
+"$(PROXY_USER)</literal>, <literal>$(PROXY_PASS)</literal>, <literal>"
+"$(SITE_USER)</literal>, <literal>$(SITE_PASS)</literal>, <literal>$(SITE)</"
+"literal> and <literal>$(SITE_PORT)</literal>."
 msgstr ""
 "FTP-URIs; ftp::Proxy ist der zu benutzende Standard-FTP-Proxy. Er wird "
 "standardmäßig in der Form <literal>ftp://[[Anwender][:Passwort]@]Host[:Port]/"
@@ -4055,14 +4236,22 @@ msgstr ""
 "literal> und <literal>$(SITE_PORT)</literal>. Jede wird von ihrem "
 "entsprechenden URI-Bestandteil genommen."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:410
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:452
+#, fuzzy
+#| msgid ""
+#| "Several settings are provided to control passive mode. Generally it is "
+#| "safe to leave passive mode on; it works in nearly every environment.  "
+#| "However, some situations require that passive mode be disabled and port "
+#| "mode FTP used instead. This can be done globally, for connections that go "
+#| "through a proxy or for a specific host (See the sample config file for "
+#| "examples)."
 msgid ""
 "Several settings are provided to control passive mode. Generally it is safe "
-"to leave passive mode on, it works in nearly every environment.  However "
-"some situations require that passive mode be disabled and port mode ftp used "
-"instead. This can be done globally, for connections that go through a proxy "
-"or for a specific host (See the sample config file for examples)."
+"to leave passive mode on; it works in nearly every environment.  However, "
+"some situations require that passive mode be disabled and port mode FTP used "
+"instead. This can be done globally or for connections that go through a "
+"proxy or for a specific host (see the sample config file for examples)."
 msgstr ""
 "Mehrere Einstellungen werden zum Steuern des passiven Modus bereitgestellt. "
 "Generell ist es sicher, den passiven Modus eingeschaltet zu lassen, er "
@@ -4072,11 +4261,11 @@ msgstr ""
 "Proxy oder über einen bestimmten Host gehen (Lesen Sie die "
 "Beispielskonfiguration, um Beispiele zu erhalten)."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:417
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:459
 msgid ""
 "It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</"
-"envar> environment variable to a http url - see the discussion of the http "
+"envar> environment variable to an HTTP URL - see the discussion of the http "
 "method above for syntax. You cannot set this in the configuration file and "
 "it is not recommended to use FTP over HTTP due to its low efficiency."
 msgstr ""
@@ -4086,8 +4275,8 @@ msgstr ""
 "nicht in der Konfigurationsdatei setzen und es wird wegen der geringen "
 "Effizienz nicht empfohlen FTP über HTTP zu benutzen."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:422
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:464
 msgid ""
 "The setting <literal>ForceExtended</literal> controls the use of RFC2428 "
 "<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is "
@@ -4102,23 +4291,33 @@ msgstr ""
 "Benutzung selbst auf IPv4-Verbindungen. Beachten Sie, dass die wenigsten FTP-"
 "Server RFC2428 unterstützen."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:435
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><literallayout>
+#: apt.conf.5.xml:478
 #, no-wrap
 msgid "/cdrom/::Mount \"foo\";"
 msgstr "/cdrom/::Mount \"foo\";"
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:430
-msgid ""
-"CD-ROM URIs; the only setting for CD-ROM URIs is the mount point, "
-"<literal>cdrom::Mount</literal> which must be the mount point for the CD-ROM "
-"drive as specified in <filename>/etc/fstab</filename>. It is possible to "
-"provide alternate mount and unmount commands if your mount point cannot be "
-"listed in the fstab (such as an SMB mount and old mount packages). The "
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:473
+#, fuzzy
+#| msgid ""
+#| "CD-ROM URIs; the only setting for CD-ROM URIs is the mount point, "
+#| "<literal>cdrom::Mount</literal> which must be the mount point for the CD-"
+#| "ROM drive as specified in <filename>/etc/fstab</filename>. It is possible "
+#| "to provide alternate mount and unmount commands if your mount point "
+#| "cannot be listed in the fstab (such as an SMB mount and old mount "
+#| "packages). The syntax is to put <placeholder type=\"literallayout\" id="
+#| "\"0\"/> within the cdrom block. It is important to have the trailing "
+#| "slash. Unmount commands can be specified using UMount."
+msgid ""
+"For URIs using the <literal>cdrom</literal> method, the only configurable "
+"option is the mount point, <literal>cdrom::Mount</literal>, which must be "
+"the mount point for the CD-ROM (or DVD, or whatever) drive as specified in "
+"<filename>/etc/fstab</filename>. It is possible to provide alternate mount "
+"and unmount commands if your mount point cannot be listed in the fstab.  The "
 "syntax is to put <placeholder type=\"literallayout\" id=\"0\"/> within the "
-"cdrom block. It is important to have the trailing slash. Unmount commands "
-"can be specified using UMount."
+"<literal>cdrom</literal> block. It is important to have the trailing slash.  "
+"Unmount commands can be specified using UMount."
 msgstr ""
 "CD-ROM-URIs; Die einzige Einstellung für CD-ROM-URIs ist der Einhängepunkt "
 "<literal>cdrom::Mount</literal>, der der Einhängepunkt des CD-ROM-Laufwerks "
@@ -4130,31 +4329,35 @@ msgstr ""
 "einzufügen. Der abschließende Schrägstrich ist wichtig. Aushängebefehle "
 "können per UMount angegeben werden."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:441
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:486
+#, fuzzy
+#| msgid ""
+#| "GPGV URIs; the only option for GPGV URIs is the option to pass additional "
+#| "parameters to gpgv.  <literal>gpgv::Options</literal> Additional options "
+#| "passed to gpgv."
 msgid ""
-"GPGV URIs; the only option for GPGV URIs is the option to pass additional "
-"parameters to gpgv.  <literal>gpgv::Options</literal> Additional options "
-"passed to gpgv."
+"For GPGV URIs the only configurable option is <literal>gpgv::Options</"
+"literal>, which passes additional parameters to gpgv."
 msgstr ""
 "GPGV-URIs; Die einzige Option für GPGV-URIs ist die Option zusätzliche "
 "Parameter an gpgv weiterzuleiten. <literal>gpgv::Options</literal> "
 "Zusätzliche Parameter werden an gpgv weitergeleitet."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:452
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis>
+#: apt.conf.5.xml:497
 #, no-wrap
 msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";"
 msgstr "Acquire::CompressionTypes::<replaceable>Dateierweiterung</replaceable> \"<replaceable>Methodenname</replaceable>\";"
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:447
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:492
 msgid ""
 "List of compression types which are understood by the acquire methods.  "
 "Files like <filename>Packages</filename> can be available in various "
-"compression formats.  Per default the acquire methods can decompress "
+"compression formats.  By default the acquire methods can decompress "
 "<command>bzip2</command>, <command>lzma</command> and <command>gzip</"
-"command> compressed files, with this setting more formats can be added on "
+"command> compressed files; with this setting more formats can be added on "
 "the fly or the used method can be changed. The syntax for this is: "
 "<placeholder type=\"synopsis\" id=\"0\"/>"
 msgstr ""
@@ -4167,33 +4370,49 @@ msgstr ""
 "Methode geändert werden. Die Syntax dafür lautet: <placeholder type="
 "\"synopsis\" id=\"0\"/>"
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:457
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis>
+#: apt.conf.5.xml:502
 #, no-wrap
 msgid "Acquire::CompressionTypes::Order:: \"gz\";"
 msgstr "Acquire::CompressionTypes::Order:: \"gz\";"
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:460
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis>
+#: apt.conf.5.xml:505
 #, no-wrap
 msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
 msgstr "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:453
-msgid ""
-"Also the <literal>Order</literal> subgroup can be used to define in which "
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:498
+#, fuzzy
+#| msgid ""
+#| "Also, the <literal>Order</literal> subgroup can be used to define in "
+#| "which order the acquire system will try to download the compressed files. "
+#| "The acquire system will try the first and proceed with the next "
+#| "compression type in this list on error, so to prefer one over the other "
+#| "type simply add the preferred type first - not already added default "
+#| "types will be added at run time to the end of the list, so e.g. "
+#| "<placeholder type=\"synopsis\" id=\"0\"/> can be used to prefer "
+#| "<command>gzip</command> compressed files over <command>bzip2</command> "
+#| "and <command>lzma</command>.  If <command>lzma</command> should be "
+#| "preferred over <command>gzip</command> and <command>bzip2</command> the "
+#| "configure setting should look like this <placeholder type=\"synopsis\" id="
+#| "\"1\"/> It is not needed to add <literal>bz2</literal> explicit to the "
+#| "list as it will be added automatic."
+msgid ""
+"Also, the <literal>Order</literal> subgroup can be used to define in which "
 "order the acquire system will try to download the compressed files. The "
 "acquire system will try the first and proceed with the next compression type "
-"in this list on error, so to prefer one over the other type simple add the "
-"preferred type at first - not already added default types will be added at "
-"run time to the end of the list, so e.g. <placeholder type=\"synopsis\" id="
+"in this list on error, so to prefer one over the other type simply add the "
+"preferred type first - default types not already added will be implicitly "
+"appended to the end of the list, so e.g. <placeholder type=\"synopsis\" id="
 "\"0\"/> can be used to prefer <command>gzip</command> compressed files over "
 "<command>bzip2</command> and <command>lzma</command>.  If <command>lzma</"
 "command> should be preferred over <command>gzip</command> and "
-"<command>bzip2</command> the configure setting should look like this "
+"<command>bzip2</command> the configure setting should look like this: "
 "<placeholder type=\"synopsis\" id=\"1\"/> It is not needed to add "
-"<literal>bz2</literal> explicit to the list as it will be added automatic."
+"<literal>bz2</literal> to the list explicitly as it will be added "
+"automatically."
 msgstr ""
 "Außerdem kann die Untergruppe <literal>Order</literal> benutzt werden, um zu "
 "definieren, in welcher Reihenfolge das »acquire«-System die komprimierten "
@@ -4210,25 +4429,37 @@ msgstr ""
 "type=\"synopsis\" id=\"1\"/>. Es ist nicht nötig <literal>bz2</literal> "
 "explizit zur Liste hinzuzufügen, da es automatisch hinzufügt wird."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:464
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><literallayout>
+#: apt.conf.5.xml:512
 #, no-wrap
 msgid "Dir::Bin::bzip2 \"/bin/bzip2\";"
 msgstr "Dir::Bin::bzip2 \"/bin/bzip2\";"
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:462
-msgid ""
-"Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</"
-"replaceable></literal> will be checked: If this setting exists the method "
-"will only be used if this file exists, e.g. for the bzip2 method (the "
-"inbuilt) setting is: <placeholder type=\"literallayout\" id=\"0\"/> Note "
-"also that list entries specified on the command line will be added at the "
-"end of the list specified in the configuration files, but before the default "
-"entries. To prefer a type in this case over the ones specified in the "
-"configuration files you can set the option direct - not in list style.  This "
-"will not override the defined list, it will only prefix the list with this "
-"type."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:507
+#, fuzzy
+#| msgid ""
+#| "Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</"
+#| "replaceable></literal> will be checked: If this setting exists the method "
+#| "will only be used if this file exists, e.g. for the bzip2 method (the "
+#| "inbuilt) setting is: <placeholder type=\"literallayout\" id=\"0\"/> Note "
+#| "also that list entries specified on the command line will be added at the "
+#| "end of the list specified in the configuration files, but before the "
+#| "default entries. To prefer a type in this case over the ones specified in "
+#| "the configuration files you can set the option direct - not in list "
+#| "style.  This will not override the defined list; it will only prefix the "
+#| "list with this type."
+msgid ""
+"Note that the <literal>Dir::Bin::<replaceable>Methodname</replaceable></"
+"literal> will be checked at run time. If this option has been set, the "
+"method will only be used if this file exists; e.g. for the <literal>bzip2</"
+"literal> method (the inbuilt) setting is: <placeholder type=\"literallayout"
+"\" id=\"0\"/> Note also that list entries specified on the command line will "
+"be added at the end of the list specified in the configuration files, but "
+"before the default entries. To prefer a type in this case over the ones "
+"specified in the configuration files you can set the option direct - not in "
+"list style.  This will not override the defined list; it will only prefix "
+"the list with this type."
 msgstr ""
 "Beachten Sie, dass <literal>Dir::Bin::<replaceable>Methodenname</"
 "replaceable></literal> zur Laufzeit geprüft wird: Falls diese Einstellung "
@@ -4242,8 +4473,8 @@ msgstr ""
 "nicht im Listenstil. Dies wird die definierte Liste nicht überschreiben, es "
 "wird diesen Typ nur vor die Liste setzen."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:469
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:517
 msgid ""
 "The special type <literal>uncompressed</literal> can be used to give "
 "uncompressed files a preference, but note that most archives don't provide "
@@ -4254,8 +4485,8 @@ msgstr ""
 "die meisten Archive keine unkomprimierten Dateien bereitstellen, so dass "
 "dies meist nur für lokale Spiegel benutzt werden kann."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:476
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:524
 msgid ""
 "When downloading <literal>gzip</literal> compressed indexes (Packages, "
 "Sources, or Translations), keep them gzip compressed locally instead of "
@@ -4268,17 +4499,26 @@ msgstr ""
 "CPU-Ressourcen bei der Erstellung des lokalen Paket-Caches. Vorgabe ist "
 "False."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:484
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:532
+#, fuzzy
+#| msgid ""
+#| "The Languages subsection controls which <filename>Translation</filename> "
+#| "files are downloaded and in which order APT tries to display the "
+#| "description-translations. APT will try to display the first available "
+#| "description in the language which is listed first. Languages can be "
+#| "defined with their short or long language codes. Note that not all "
+#| "archives provide <filename>Translation</filename> files for every "
+#| "Language - especially the long Languagecodes are rare, so please inform "
+#| "you which ones are available before you set here impossible values."
 msgid ""
 "The Languages subsection controls which <filename>Translation</filename> "
-"files are downloaded and in which order APT tries to display the Description-"
-"Translations. APT will try to display the first available Description in the "
-"Language which is listed at first. Languages can be defined with their short "
-"or long Languagecodes. Note that not all archives provide "
-"<filename>Translation</filename> files for every Language - especially the "
-"long Languagecodes are rare, so please inform you which ones are available "
-"before you set here impossible values."
+"files are downloaded and in which order APT tries to display the description-"
+"translations. APT will try to display the first available description in the "
+"language which is listed first. Languages can be defined with their short or "
+"long language codes. Note that not all archives provide "
+"<filename>Translation</filename> files for every language - the long "
+"language codes are especially rare."
 msgstr ""
 "Der Unterabschnitt Languages steuert welche <filename>Translation</filename>-"
 "Dateien heruntergeladen werden und in welcher Reihenfolge APT versucht, die "
@@ -4290,33 +4530,52 @@ msgstr ""
 "selten. Informieren Sie sich deshalb bitte welche verfügbar sind, bevor Sie "
 "hier unmögliche Werte einsetzen."
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><programlisting>
-#: apt.conf.5.xml:500
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><programlisting>
+#: apt.conf.5.xml:549
 #, no-wrap
 msgid "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; };"
 msgstr "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; };"
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:490
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:537
+#, fuzzy
+#| msgid ""
+#| "The default list includes \"environment\" and \"en\". "
+#| "\"<literal>environment</literal>\" has a special meaning here: It will be "
+#| "replaced at runtime with the languagecodes extracted from the "
+#| "<literal>LC_MESSAGES</literal> environment variable.  It will also ensure "
+#| "that these codes are not included twice in the list. If "
+#| "<literal>LC_MESSAGES</literal> is set to \"C\" only the "
+#| "<filename>Translation-en</filename> file (if available) will be used.  To "
+#| "force APT to use no Translation file use the setting <literal>Acquire::"
+#| "Languages=none</literal>. \"<literal>none</literal>\" is another special "
+#| "meaning code which will stop the search for a suitable "
+#| "<filename>Translation</filename> file.  This can be used by the system "
+#| "administrator to let APT know that it should download also this files "
+#| "without actually use them if the environment doesn't specify this "
+#| "languages. So the following example configuration will result in the "
+#| "order \"en, de\" in an english and in \"de, en\" in a german "
+#| "localization. Note that \"fr\" is downloaded, but not used if APT is not "
+#| "used in a french localization, in such an environment the order would be "
+#| "\"fr, de, en\".  <placeholder type=\"programlisting\" id=\"0\"/>"
 msgid ""
 "The default list includes \"environment\" and \"en\". "
-"\"<literal>environment</literal>\" has a special meaning here: It will be "
-"replaced at runtime with the languagecodes extracted from the "
+"\"<literal>environment</literal>\" has a special meaning here: it will be "
+"replaced at runtime with the language codes extracted from the "
 "<literal>LC_MESSAGES</literal> environment variable.  It will also ensure "
 "that these codes are not included twice in the list. If "
 "<literal>LC_MESSAGES</literal> is set to \"C\" only the "
 "<filename>Translation-en</filename> file (if available) will be used.  To "
-"force apt to use no Translation file use the setting <literal>Acquire::"
+"force APT to use no Translation file use the setting <literal>Acquire::"
 "Languages=none</literal>. \"<literal>none</literal>\" is another special "
-"meaning code which will stop the search for a fitting <filename>Translation</"
-"filename> file.  This can be used by the system administrator to let APT "
-"know that it should download also this files without actually use them if "
-"the environment doesn't specify this languages. So the following example "
-"configuration will result in the order \"en, de\" in an english and in \"de, "
-"en\" in a german localization. Note that \"fr\" is downloaded, but not used "
-"if APT is not used in a french localization, in such an environment the "
-"order would be \"fr, de, en\".  <placeholder type=\"programlisting\" id="
-"\"0\"/>"
+"meaning code which will stop the search for a suitable "
+"<filename>Translation</filename> file.  This tells APT to download these "
+"translations too, without actually using them unless the environment "
+"specifies the languages. So the following example configuration will result "
+"in the order \"en, de\" in an English locale or \"de, en\" in a German one. "
+"Note that \"fr\" is downloaded, but not used unless APT is used in a French "
+"locale (where the order would be \"fr, de, en\").  <placeholder type="
+"\"programlisting\" id=\"0\"/>"
 msgstr ""
 "Die Standardliste beinhaltet »environment« und »en«. »<literal>environment</"
 "literal>« hat hier eine besondere Bedeutung: Es wird zur Laufzeit durch die "
@@ -4338,8 +4597,8 @@ msgstr ""
 "französischen Lokalisierung benutzt wird. In einer solchen Umgebung wäre die "
 "Reihenfolge »fr, de, en«. <placeholder type=\"programlisting\" id=\"0\"/>"
 
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:501
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:550
 msgid ""
 "Note: To prevent problems resulting from APT being executed in different "
 "environments (e.g. by different users or by other programs) all Translation "
@@ -4353,39 +4612,50 @@ msgstr ""
 "Liste hinzugefügt (nach einem impliziten »<literal>none</literal>«)."
 
 #. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:512
+#: apt.conf.5.xml:560
 msgid "Directories"
 msgstr "Verzeichnisse"
 
 #. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:514
+#: apt.conf.5.xml:562
 msgid ""
 "The <literal>Dir::State</literal> section has directories that pertain to "
 "local state information. <literal>lists</literal> is the directory to place "
 "downloaded package lists in and <literal>status</literal> is the name of the "
-"dpkg status file.  <literal>preferences</literal> is the name of the APT "
+"&dpkg; status file.  <literal>preferences</literal> is the name of the APT "
 "<filename>preferences</filename> file.  <literal>Dir::State</literal> "
-"contains the default directory to prefix on all sub items if they do not "
+"contains the default directory to prefix on all sub-items if they do not "
 "start with <filename>/</filename> or <filename>./</filename>."
 msgstr ""
 "Der <literal>Dir::State</literal>-Abschnitt hat Verzeichnisse, die zu "
 "lokalen Statusinformationen gehören. <literal>lists</literal> ist das "
 "Verzeichnis, in das heruntergeladene Paketlisten platziert werden und "
-"<literal>status</literal> ist der Name der Dpkg-Statusdatei. "
+"<literal>status</literal> ist der Name der &dpkg; Statusdatei. "
 "<literal>preferences</literal> ist der Name der APT-<filename>preferences</"
 "filename>-Datei. <literal>Dir::State</literal> enthält das "
 "Standardverzeichnis, das allen Unterelementen vorangestellt wird, falls sie "
 "nicht mit <filename>/</filename> oder <filename>./</filename> beginnen."
 
 #. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:521
+#: apt.conf.5.xml:569
+#, fuzzy
+#| msgid ""
+#| "<literal>Dir::Cache</literal> contains locations pertaining to local "
+#| "cache information, such as the two package caches <literal>srcpkgcache</"
+#| "literal> and <literal>pkgcache</literal> as well as the location to place "
+#| "downloaded archives, <literal>Dir::Cache::archives</literal>. Generation "
+#| "of caches can be turned off by setting their names to be blank. This will "
+#| "slow down startup but save disk space. It is probably preferable to turn "
+#| "off the pkgcache rather than the srcpkgcache. Like <literal>Dir::State</"
+#| "literal> the default directory is contained in <literal>Dir::Cache</"
+#| "literal>"
 msgid ""
 "<literal>Dir::Cache</literal> contains locations pertaining to local cache "
 "information, such as the two package caches <literal>srcpkgcache</literal> "
 "and <literal>pkgcache</literal> as well as the location to place downloaded "
 "archives, <literal>Dir::Cache::archives</literal>. Generation of caches can "
-"be turned off by setting their names to be blank. This will slow down "
-"startup but save disk space. It is probably preferred to turn off the "
+"be turned off by setting their names to the empty string. This will slow "
+"down startup but save disk space. It is probably preferable to turn off the "
 "pkgcache rather than the srcpkgcache. Like <literal>Dir::State</literal> the "
 "default directory is contained in <literal>Dir::Cache</literal>"
 msgstr ""
@@ -4401,7 +4671,7 @@ msgstr ""
 "in <literal>Dir::Cache</literal> enthalten."
 
 #. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:530
+#: apt.conf.5.xml:578
 msgid ""
 "<literal>Dir::Etc</literal> contains the location of configuration files, "
 "<literal>sourcelist</literal> gives the location of the sourcelist and "
@@ -4416,7 +4686,7 @@ msgstr ""
 "Konfigurationsdatei erfolgt)."
 
 #. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:536
+#: apt.conf.5.xml:584
 msgid ""
 "The <literal>Dir::Parts</literal> setting reads in all the config fragments "
 "in lexical order from the directory specified. After this is done then the "
@@ -4428,7 +4698,7 @@ msgstr ""
 "geladen."
 
 #. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:540
+#: apt.conf.5.xml:588
 msgid ""
 "Binary programs are pointed to by <literal>Dir::Bin</literal>. <literal>Dir::"
 "Bin::Methods</literal> specifies the location of the method handlers and "
@@ -4446,7 +4716,7 @@ msgstr ""
 "Programms an."
 
 #. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:548
+#: apt.conf.5.xml:596
 msgid ""
 "The configuration item <literal>RootDir</literal> has a special meaning.  If "
 "set, all paths in <literal>Dir::</literal> will be relative to "
@@ -4466,7 +4736,7 @@ msgstr ""
 "<filename>/tmp/staging/var/lib/dpkg/status</filename> nachgesehen."
 
 #. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:561
+#: apt.conf.5.xml:609
 msgid ""
 "The <literal>Ignore-Files-Silently</literal> list can be used to specify "
 "which files APT should silently ignore while parsing the files in the "
@@ -4484,15 +4754,15 @@ msgstr ""
 "diese Muster verwandt werden."
 
 #. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:570
+#: apt.conf.5.xml:618
 msgid "APT in DSelect"
 msgstr "APT in DSelect"
 
 #. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:572
+#: apt.conf.5.xml:620
 msgid ""
 "When APT is used as a &dselect; method several configuration directives "
-"control the default behaviour. These are in the <literal>DSelect</literal> "
+"control the default behavior. These are in the <literal>DSelect</literal> "
 "section."
 msgstr ""
 "Wenn APT als eine &dselect;-Methode benutzt wird, steuern mehrere "
@@ -4500,43 +4770,48 @@ msgstr ""
 "<literal>DSelect</literal>."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:577
+#: apt.conf.5.xml:625
 msgid ""
-"Cache Clean mode; this value may be one of always, prompt, auto, pre-auto "
-"and never.  always and prompt will remove all packages from the cache after "
-"upgrading, prompt (the default) does so conditionally.  auto removes only "
-"those packages which are no longer downloadable (replaced with a new version "
-"for instance).  pre-auto performs this action before downloading new "
-"packages."
+"Cache Clean mode; this value may be one of <literal>always</literal>, "
+"<literal>prompt</literal>, <literal>auto</literal>, <literal>pre-auto</"
+"literal> and <literal>never</literal>.  <literal>always</literal> and "
+"<literal>prompt</literal> will remove all packages from the cache after "
+"upgrading, <literal>prompt</literal> (the default) does so conditionally.  "
+"<literal>auto</literal> removes only those packages which are no longer "
+"downloadable (replaced with a new version for instance).  <literal>pre-auto</"
+"literal> performs this action before downloading new packages."
 msgstr ""
-"Zwischenspeicherbereinigungsmodus; Dieser Wert kann entweder »always«, "
-"»prompt«, »auto«, »pre-auto« oder »never« sein. »always« und »prompt« "
-"werden, nachdem das Upgrade durchgeführt wurde, alle Pakete aus dem "
-"Zwischenspeicher entfernen, »prompt« (die Vorgabe) tut dies bedingt. »auto« "
-"entfernt nur jene Pakete, die nicht länger heruntergeladen werden können "
-"(zum Beispiel, weil sie durch eine neue Version ersetzt wurden). »pre-auto« "
-"führt diese Aktion vor dem Herunterladen neuer Pakete durch."
+"Zwischenspeicherbereinigungsmodus; Dieser Wert kann entweder "
+"»<literal>always</literal>«, »<literal>prompt</literal>«, »<literal>auto</"
+"literal>«, »<literal>pre-auto</literal>« oder »<literal>never</literal>« "
+"sein. »<literal>always</literal>« und »<literal>prompt</literal>« werden, "
+"nachdem das Upgrade durchgeführt wurde, alle Pakete aus dem Zwischenspeicher "
+"entfernen, »<literal>prompt</literal>« (die Vorgabe) tut dies bedingt. "
+"»<literal>auto</literal>« entfernt nur jene Pakete, die nicht länger "
+"heruntergeladen werden können (zum Beispiel, weil sie durch eine neue "
+"Version ersetzt wurden). »<literal>pre-auto</literal>« führt diese Aktion "
+"vor dem Herunterladen neuer Pakete durch."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:586
+#: apt.conf.5.xml:639
 msgid ""
-"The contents of this variable is passed to &apt-get; as command line options "
-"when it is run for the install phase."
+"The contents of this variable are passed to &apt-get; as command line "
+"options when it is run for the install phase."
 msgstr ""
 "Die Inhalte dieser Variablen werden als Befehlszeilenoptionen an &apt-get; "
 "übermittelt, wenn es für die Installationsphase durchlaufen wird."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:591
+#: apt.conf.5.xml:644
 msgid ""
-"The contents of this variable is passed to &apt-get; as command line options "
-"when it is run for the update phase."
+"The contents of this variable are passed to &apt-get; as command line "
+"options when it is run for the update phase."
 msgstr ""
 "Die Inhalte dieser Variable werden als Befehlszeilenoptionen an &apt-get; "
 "übermittelt, wenn es für die Aktualisierungsphase durchlaufen wird."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:596
+#: apt.conf.5.xml:649
 msgid ""
 "If true the [U]pdate operation in &dselect; will always prompt to continue.  "
 "The default is to prompt only on error."
@@ -4545,12 +4820,12 @@ msgstr ""
 "nachfragen, um fortzufahren. Vorgabe ist es, nur bei Fehlern nachzufragen."
 
 #. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:602
-msgid "How APT calls dpkg"
-msgstr "Wie APT Dpkg aufruft"
+#: apt.conf.5.xml:655
+msgid "How APT calls &dpkg;"
+msgstr "Wie APT &dpkg; aufruft"
 
 #. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:603
+#: apt.conf.5.xml:656
 msgid ""
 "Several configuration directives control how APT invokes &dpkg;. These are "
 "in the <literal>DPkg</literal> section."
@@ -4559,22 +4834,22 @@ msgstr ""
 "stehen im Abschnitt <literal>DPkg</literal>."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:608
+#: apt.conf.5.xml:661
 msgid ""
-"This is a list of options to pass to dpkg. The options must be specified "
+"This is a list of options to pass to &dpkg;. The options must be specified "
 "using the list notation and each list item is passed as a single argument to "
 "&dpkg;."
 msgstr ""
-"Dies ist eine Liste von Optionen, die an Dpkg übermittelt werden. Die "
+"Dies ist eine Liste von Optionen, die an &dpkg; übermittelt werden. Die "
 "Optionen müssen unter Benutzung der Listenschreibweise angegeben werden und "
 "jedes Listenelement wird als einzelnes Argument an &dpkg; übermittelt."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:614
+#: apt.conf.5.xml:667
 msgid ""
 "This is a list of shell commands to run before/after invoking &dpkg;.  Like "
 "<literal>options</literal> this must be specified in list notation. The "
-"commands are invoked in order using <filename>/bin/sh</filename>, should any "
+"commands are invoked in order using <filename>/bin/sh</filename>; should any "
 "fail APT will abort."
 msgstr ""
 "Dies ist eine Liste von Shell-Befehlen, die vor/nach dem Aufruf von &dpkg; "
@@ -4584,15 +4859,22 @@ msgstr ""
 "APT abgebrochen."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:621
+#: apt.conf.5.xml:674
+#, fuzzy
+#| msgid ""
+#| "This is a list of shell commands to run before invoking &dpkg;. Like "
+#| "<literal>options</literal> this must be specified in list notation. The "
+#| "commands are invoked in order using <filename>/bin/sh</filename>; should "
+#| "any fail APT will abort. APT will pass to the commands on standard input "
+#| "the filenames of all .deb files it is going to install, one per line."
 msgid ""
-"This is a list of shell commands to run before invoking dpkg. Like "
+"This is a list of shell commands to run before invoking &dpkg;. Like "
 "<literal>options</literal> this must be specified in list notation. The "
-"commands are invoked in order using <filename>/bin/sh</filename>, should any "
-"fail APT will abort. APT will pass to the commands on standard input the "
-"filenames of all .deb files it is going to install, one per line."
+"commands are invoked in order using <filename>/bin/sh</filename>; should any "
+"fail APT will abort. APT will pass the filenames of all .deb files it is "
+"going to install to the commands, one per line on standard input."
 msgstr ""
-"Dies ist eine Liste von Shell-Befehlen, die vor dem Aufruf von Dpkg "
+"Dies ist eine Liste von Shell-Befehlen, die vor dem Aufruf von &dpkg; "
 "ausgeführt werden. Wie <literal>options</literal> muss dies in "
 "Listenschreibweise angegeben werden. Die Befehle werden der Reihenfolge nach "
 "mit <filename>/bin/sh</filename> aufgerufen, sollte einer fehlschlagen, wird "
@@ -4601,7 +4883,7 @@ msgstr ""
 "pro Zeile."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:627
+#: apt.conf.5.xml:680
 msgid ""
 "Version 2 of this protocol dumps more information, including the protocol "
 "version, the APT configuration space and the packages, files and versions "
@@ -4617,18 +4899,18 @@ msgstr ""
 "literal> gegeben wird."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:635
+#: apt.conf.5.xml:688
 msgid ""
-"APT chdirs to this directory before invoking dpkg, the default is <filename>/"
-"</filename>."
+"APT chdirs to this directory before invoking &dpkg;, the default is "
+"<filename>/</filename>."
 msgstr ""
-"APT wechselt mit chdir in dieses Verzeichnis, bevor Dpkg aufgerufen wird, "
+"APT wechselt mit chdir in dieses Verzeichnis, bevor &dpkg; aufgerufen wird, "
 "die Vorgabe ist <filename>/</filename>."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:640
+#: apt.conf.5.xml:693
 msgid ""
-"These options are passed to &dpkg-buildpackage; when compiling packages, the "
+"These options are passed to &dpkg-buildpackage; when compiling packages; the "
 "default is to disable signing and produce all binaries."
 msgstr ""
 "Diese Optionen werden an &dpkg-buildpackage; beim Kompilieren von Paketen "
@@ -4636,39 +4918,52 @@ msgstr ""
 "Programme werden erstellt."
 
 #. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt.conf.5.xml:645
+#: apt.conf.5.xml:698
 msgid "dpkg trigger usage (and related options)"
 msgstr "Dpkd-Trigger-Benutzung (und zugehörige Optionen)"
 
 #. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml:646
-msgid ""
-"APT can call dpkg in a way so it can make aggressive use of triggers over "
-"multiple calls of dpkg. Without further options dpkg will use triggers only "
-"in between his own run. Activating these options can therefore decrease the "
-"time needed to perform the install / upgrade. Note that it is intended to "
-"activate these options per default in the future, but as it changes the way "
-"APT calling dpkg drastically it needs a lot more testing.  <emphasis>These "
-"options are therefore currently experimental and should not be used in "
-"productive environments.</emphasis> Also it breaks the progress reporting so "
-"all frontends will currently stay around half (or more) of the time in the "
-"100% state while it actually configures all packages."
-msgstr ""
-"APT kann Dpkg auf eine Art aufrufen, in der aggressiv Gebrauch von Triggern "
-"über mehrere Dpkg-Aufrufe hinweg gemacht wird. Ohne weitere Optionen wird "
-"Dpkg Trigger nur während seiner eigenen Ausführung benutzen. Diese Optionen "
-"zu benutzen, kann daher die zum Installieren/Upgrade benötigte Zeit "
-"verkürzen. Beachten Sie, dass geplant ist, diese Optionen in Zukunft "
-"standardmäßig zu aktivieren, aber da es die Art, wie APT Dpkg aufruft, "
-"drastisch ändert, benötigt es noch viele weitere Tests. <emphasis>Diese "
-"Optionen sind daher aktuell noch experimentell und sollten nicht in "
-"produktiven Umgebungen benutzt werden.</emphasis> Außerdem unterbricht es "
-"die Fortschrittsanzeige, so dass alle Oberflächen derzeit die halbe (oder "
-"mehr) Zeit auf dem Status 100% stehen, während tatsächlich alle Pakete "
-"konfiguriert werden."
+#: apt.conf.5.xml:699
+#, fuzzy
+#| msgid ""
+#| "APT can call &dpkg; in a way so it can make aggressive use of triggers "
+#| "over multiple calls of &dpkg;. Without further options &dpkg; will use "
+#| "triggers only in between his own run. Activating these options can "
+#| "therefore decrease the time needed to perform the install / upgrade. Note "
+#| "that it is intended to activate these options per default in the future, "
+#| "but as it changes the way APT calling &dpkg; drastically it needs a lot "
+#| "more testing.  <emphasis>These options are therefore currently "
+#| "experimental and should not be used in production environments.</"
+#| "emphasis> It also breaks progress reporting such that all frontends will "
+#| "currently stay around half (or more) of the time in the 100% state while "
+#| "it actually configures all packages."
+msgid ""
+"APT can call &dpkg; in such a way as to let it make aggressive use of "
+"triggers over multiple calls of &dpkg;. Without further options &dpkg; will "
+"use triggers once each time it runs.  Activating these options can therefore "
+"decrease the time needed to perform the install or upgrade. Note that it is "
+"intended to activate these options per default in the future, but as it "
+"drastically changes the way APT calls &dpkg; it needs a lot more testing.  "
+"<emphasis>These options are therefore currently experimental and should not "
+"be used in production environments.</emphasis> It also breaks progress "
+"reporting such that all front-ends will currently stay around half (or more) "
+"of the time in the 100% state while it actually configures all packages."
+msgstr ""
+"APT kann &dpkg; auf eine Art aufrufen, in der aggressiv Gebrauch von "
+"Triggern über mehrere &dpkg; Aufrufe hinweg gemacht wird. Ohne weitere "
+"Optionen wird &dpkg; Trigger nur während seiner eigenen Ausführung benutzen. "
+"Diese Optionen zu benutzen, kann daher die zum Installieren/Upgrade "
+"benötigte Zeit verkürzen. Beachten Sie, dass geplant ist, diese Optionen in "
+"Zukunft standardmäßig zu aktivieren, aber da es die Art, wie APT &dpkg; "
+"aufruft, drastisch ändert, benötigt es noch viele weitere Tests. "
+"<emphasis>Diese Optionen sind daher aktuell noch experimentell und sollten "
+"nicht in produktiven Umgebungen benutzt werden.</emphasis> Außerdem "
+"unterbricht es die Fortschrittsanzeige, so dass alle Oberflächen derzeit die "
+"halbe (oder mehr) Zeit auf dem Status 100% stehen, während tatsächlich alle "
+"Pakete konfiguriert werden."
 
 #. type: Content of: <refentry><refsect1><refsect2><para><literallayout>
-#: apt.conf.5.xml:661
+#: apt.conf.5.xml:714
 #, no-wrap
 msgid ""
 "DPkg::NoTriggers \"true\";\n"
@@ -4682,15 +4977,15 @@ msgstr ""
 "DPkg::TriggersPending \"true\";"
 
 #. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml:655
+#: apt.conf.5.xml:708
 msgid ""
 "Note that it is not guaranteed that APT will support these options or that "
 "these options will not cause (big) trouble in the future. If you have "
 "understand the current risks and problems with these options, but are brave "
-"enough to help testing them create a new configuration file and test a "
+"enough to help testing them, create a new configuration file and test a "
 "combination of options. Please report any bugs, problems and improvements "
 "you encounter and make sure to note which options you have used in your "
-"reports. Asking dpkg for help could also be useful for debugging proposes, "
+"reports. Asking &dpkg; for help could also be useful for debugging proposes, "
 "see e.g. <command>dpkg --audit</command>. A defensive option combination "
 "would be <placeholder type=\"literallayout\" id=\"0\"/>"
 msgstr ""
@@ -4702,72 +4997,97 @@ msgstr ""
 "von Optionen. Bitte berichten Sie auf Englisch jegliche Fehler, Probleme und "
 "Verbesserungen, denen Sie begegnen und stellen Sie sicher, dass Sie alle von "
 "Ihnen benutzten Optionen in Ihren Berichten vermerken. Zum Zweck der "
-"Fehlersuche könnte es außerdem nützlich sein, Dpkg um Hilfe zu fragen. Lesen "
-"Sie z.B. <command>dpkg --audit</command>. Eine defensive Optionenkombination "
-"wäre <placeholder type=\"literallayout\" id=\"0\"/>"
+"Fehlersuche könnte es außerdem nützlich sein, &dpkg; um Hilfe zu fragen. "
+"Lesen Sie z.B. <command>dpkg --audit</command>. Eine defensive "
+"Optionenkombination wäre <placeholder type=\"literallayout\" id=\"0\"/>"
 
 #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:668
+#: apt.conf.5.xml:721
 msgid ""
-"Add the no triggers flag to all dpkg calls (except the ConfigurePending "
+"Add the no triggers flag to all &dpkg; calls (except the ConfigurePending "
 "call).  See &dpkg; if you are interested in what this actually means. In "
-"short: dpkg will not run the triggers when this flag is present unless it is "
-"explicitly called to do so in an extra call.  Note that this option exists "
-"(undocumented) also in older apt versions with a slightly different meaning: "
-"Previously these option only append --no-triggers to the configure calls to "
-"dpkg - now apt will add these flag also to the unpack and remove calls."
-msgstr ""
-"fügt die keine-Trigger-Markierung zu allen Dpkg-Aufrufen hinzu (ausgenommen "
-"den ConfigurePending-Aufruf). Siehe &dpkg;, wenn Sie interessiert sind, was "
-"dies tatsächlich bedeutet. In Kürze: Dpkg wird die Trigger nicht ausführen, "
-"dann ist diese Markierung vorhanden, außer sie wird explizit aufgerufen, um "
-"dies in einem gesonderten Aufruf zu tun. Beachten Sie, dass diese Option "
-"außerdem in älteren APT-Versionen mit einer geringfügig anderen Bedeutung "
-"existiert (nicht dokumentiert): Vorher hing diese Option nur --no-triggers "
-"an die Konfigurationsaufrufe für Dpkg an – nun wird APT diese Markierung "
-"außerdem an die »unpack«- und »remove«-Aufrufe anhängen."
+"short: &dpkg; will not run the triggers when this flag is present unless it "
+"is explicitly called to do so in an extra call.  Note that this option "
+"exists (undocumented) also in older APT versions with a slightly different "
+"meaning: Previously these option only append --no-triggers to the configure "
+"calls to &dpkg; - now APT will also add this flag to the unpack and remove "
+"calls."
+msgstr ""
+"fügt die keine-Trigger-Markierung zu allen &dpkg; Aufrufen hinzu "
+"(ausgenommen den ConfigurePending-Aufruf). Siehe &dpkg;, wenn Sie "
+"interessiert sind, was dies tatsächlich bedeutet. In Kürze: &dpkg; wird die "
+"Trigger nicht ausführen, dann ist diese Markierung vorhanden, außer sie wird "
+"explizit aufgerufen, um dies in einem gesonderten Aufruf zu tun. Beachten "
+"Sie, dass diese Option außerdem in älteren APT-Versionen mit einer "
+"geringfügig anderen Bedeutung existiert (nicht dokumentiert): Vorher hing "
+"diese Option nur --no-triggers an die Konfigurationsaufrufe für &dpkg; an – "
+"nun wird APT diese Markierung außerdem an die »unpack«- und »remove«-Aufrufe "
+"anhängen."
 
 #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:676
+#: apt.conf.5.xml:729
+#, fuzzy
+#| msgid ""
+#| "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" "
+#| "and \"<literal>no</literal>\".  \"<literal>all</literal>\" is the default "
+#| "value and causes APT to configure all packages explicit.  The "
+#| "\"<literal>smart</literal>\" way is it to configure only packages which "
+#| "need to be configured before another package can be unpacked (Pre-"
+#| "Depends) and let the rest configure by &dpkg; with a call generated by "
+#| "the next option. \"<literal>no</literal>\" on the other hand will not "
+#| "configure anything and totally rely on &dpkg; for configuration (which "
+#| "will at the moment fail if a Pre-Depends is encountered).  Setting this "
+#| "option to another than the all value will implicitly activate also the "
+#| "next option per default as otherwise the system could end in an "
+#| "unconfigured status which could be unbootable!"
 msgid ""
 "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" "
-"and \"<literal>no</literal>\".  \"<literal>all</literal>\" is the default "
-"value and causes APT to configure all packages explicit.  The "
-"\"<literal>smart</literal>\" way is it to configure only packages which need "
-"to be configured before another package can be unpacked (Pre-Depends) and "
-"let the rest configure by dpkg with a call generated by the next option. "
-"\"<literal>no</literal>\" on the other hand will not configure anything and "
-"totally rely on dpkg for configuration (which will at the moment fail if a "
-"Pre-Depends is encountered).  Setting this option to another than the all "
-"value will implicitly activate also the next option per default as otherwise "
-"the system could end in an unconfigured status which could be unbootable!"
+"and \"<literal>no</literal>\".  The default value is \"<literal>all</literal>"
+"\", which causes APT to configure all packages. The \"<literal>smart</"
+"literal>\" way is to configure only packages which need to be configured "
+"before another package can be unpacked (Pre-Depends), and let the rest be "
+"configured by &dpkg; with a call generated by the ConfigurePending option "
+"(see below). On the other hand, \"<literal>no</literal>\" will not configure "
+"anything, and totally relies on &dpkg; for configuration (which at the "
+"moment will fail if a Pre-Depends is encountered). Setting this option to "
+"any value other than <literal>all</literal> will implicitly also activate "
+"the next option by default, as otherwise the system could end in an "
+"unconfigured and potentially unbootable state."
 msgstr ""
 "Gültige Werte sind »<literal>all</literal>«, »<literal>smart</literal>« und "
 "»<literal>no</literal>«. »<literal>all</literal>« ist der Vorgabewert und "
 "veranlasst APT alle Pakete explizit zu konfigurieren. Die Art von "
 "»<literal>smart</literal>« ist es, nur die Pakete zu konfigurieren, die "
 "konfiguriert werden müssen, bevor eine anderes Paket entpackt (Pre-Depends) "
-"werden kann und den Rest von Dpkg mit einem Aufruf, der von der nächsten "
+"werden kann und den Rest von &dpkg; mit einem Aufruf, der von der nächsten "
 "Option generiert wurde, konfigurieren zu lassen. Im Gegensatz dazu wird "
 "»<literal>no</literal>« nicht konfigurieren und völlig die Konfiguration von "
-"Dpkg weitergeben (die in dem Moment fehlschlägt, in dem ein Pre-Depends "
+"&dpkg; weitergeben (die in dem Moment fehlschlägt, in dem ein Pre-Depends "
 "vorkommt). Diese Option auf etwas anderes als all zu setzen, wird außerdem "
 "implizit standardmäßig die nächste Option aktivieren, da das System "
 "anderenfalls in einem nicht konfigurierten Status enden könnte, der nicht "
 "mehr startbar sein könnte."
 
 #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:687
-msgid ""
-"If this option is set apt will call <command>dpkg --configure --pending</"
-"command> to let dpkg handle all required configurations and triggers. This "
-"option is activated automatic per default if the previous option is not set "
-"to <literal>all</literal>, but deactivating could be useful if you want to "
-"run APT multiple times in a row - e.g. in an installer. In these sceneries "
-"you could deactivate this option in all but the last run."
+#: apt.conf.5.xml:744
+#, fuzzy
+#| msgid ""
+#| "If this option is set, APT will call <command>dpkg --configure --pending</"
+#| "command> to let &dpkg; handle all required configurations and triggers. "
+#| "This option is activated automatically per default if the previous option "
+#| "is not set to <literal>all</literal>, but deactivating it could be useful "
+#| "if you want to run APT multiple times in a row - e.g. in an installer. In "
+#| "these sceneries you could deactivate this option in all but the last run."
+msgid ""
+"If this option is set APT will call <command>dpkg --configure --pending</"
+"command> to let &dpkg; handle all required configurations and triggers. This "
+"option is activated automatically per default if the previous option is not "
+"set to <literal>all</literal>, but deactivating it could be useful if you "
+"want to run APT multiple times in a row - e.g. in an installer. In these "
+"sceneries you could deactivate this option in all but the last run."
 msgstr ""
 "Wenn diese Option gesetzt ist, wird APT <command>dpkg --configure --pending</"
-"command> aufrufen, um Dpkg alle benötigten Konfigurationen und Trigger "
+"command> aufrufen, um &dpkg; alle benötigten Konfigurationen und Trigger "
 "handhaben zu lassen. Diese Option ist als Vorgabe automatisch aktiviert, "
 "wenn die vorherige Option nicht auf <literal>all</literal> gesetzt ist, aber "
 "Deaktivieren könnte nützlich sein, wenn Sie APT mehrmals hintereinander "
@@ -4776,13 +5096,13 @@ msgstr ""
 "deaktivieren."
 
 #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:694
+#: apt.conf.5.xml:751
 msgid ""
-"Useful for <literal>smart</literal> configuration as a package which has "
-"pending triggers is not considered as <literal>installed</literal> and dpkg "
-"treats them as <literal>unpacked</literal> currently which is a dealbreaker "
-"for Pre-Dependencies (see debbugs #526774). Note that this will process all "
-"triggers, not only the triggers needed to configure this package."
+"Useful for the <literal>smart</literal> configuration as a package which has "
+"pending triggers is not considered as <literal>installed</literal>, and "
+"&dpkg; treats them as <literal>unpacked</literal> currently which is a "
+"showstopper for Pre-Dependencies (see debbugs #526774). Note that this will "
+"process all triggers, not only the triggers needed to configure this package."
 msgstr ""
 "nützlich für <literal>smart</literal>-Konfiguration, da ein Paket mit "
 "ausstehenden Triggern nicht als <literal>installed</literal> angesehen wird "
@@ -4791,27 +5111,8 @@ msgstr ""
 "Trigger ausführt, nicht nur die Trigger, die zum Konfigurieren dieses Pakets "
 "benötigt werden."
 
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:700
-msgid ""
-"As the configuration can be deferred to be done at the end by dpkg it can be "
-"tried to order the unpack series only by critical needs, e.g. by Pre-"
-"Depends. Default is true and therefore the \"old\" method of ordering in "
-"various steps by everything. While both method were present in earlier APT "
-"versions the <literal>OrderCritical</literal> method was unused, so this "
-"method is very experimental and needs further improvements before becoming "
-"really useful."
-msgstr ""
-"Da die Konfiguration an das Ende von Dpkg verschoben werden kann, kann "
-"versucht werden, nur die Entpackserien von kritischen Notwendigkeiten, z.B. "
-"von Pre-Depends, anzuweisen. Vorgabe ist true und daher die »alte« Methode "
-"zum Sortieren nach allem in mehreren Schritten. Obwohl in früheren Versionen "
-"von APT beide Methoden enthalten waren, wurde die <literal>OrderCritical</"
-"literal>-Methode nicht benutzt, so dass diese Methode sehr experimentell ist "
-"und weitere Verbesserungen benötigt, bevor sie wirklich nützlich wird."
-
 #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:715
+#: apt.conf.5.xml:764
 #, no-wrap
 msgid ""
 "OrderList::Score {\n"
@@ -4829,17 +5130,17 @@ msgstr ""
 "};"
 
 #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:708
-msgid ""
-"Essential packages (and there dependencies) should be configured immediately "
-"after unpacking. It will be a good idea to do this quite early in the "
-"upgrade process as these these configure calls require currently also "
-"<literal>DPkg::TriggersPending</literal> which will run quite a few triggers "
-"(which maybe not needed). Essentials get per default a high score but the "
-"immediate flag is relatively low (a package which has a Pre-Depends is "
-"higher rated).  These option and the others in the same group can be used to "
-"change the scoring. The following example shows the settings with there "
-"default values.  <placeholder type=\"literallayout\" id=\"0\"/>"
+#: apt.conf.5.xml:757
+msgid ""
+"Essential packages (and their dependencies) should be configured immediately "
+"after unpacking. It is a good idea to do this quite early in the upgrade "
+"process as these configure calls also currently require <literal>DPkg::"
+"TriggersPending</literal> which will run quite a few triggers (which may not "
+"be needed). Essentials get per default a high score but the immediate flag "
+"is relatively low (a package which has a Pre-Depends is rated higher).  "
+"These option and the others in the same group can be used to change the "
+"scoring. The following example shows the settings with their default "
+"values.  <placeholder type=\"literallayout\" id=\"0\"/>"
 msgstr ""
 "Essentielle Pakete (und ihre Abhängigkeiten) sollten sofort nach dem "
 "Entpacken konfiguriert werden. Es ist eine gute Idee, dies ziemlich früh im "
@@ -4853,17 +5154,17 @@ msgstr ""
 "mit ihren Vorgabewerten. <placeholder type=\"literallayout\" id=\"0\"/>"
 
 #. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:728
+#: apt.conf.5.xml:777
 msgid "Periodic and Archives options"
 msgstr "Periodische- und Archivoptionen"
 
 #. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:729
+#: apt.conf.5.xml:778
 msgid ""
 "<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups "
-"of options configure behavior of apt periodic updates, which is done by "
-"<literal>/etc/cron.daily/apt</literal> script. See header of this script for "
-"the brief documentation of these options."
+"of options configure behavior of apt periodic updates, which is done by the "
+"<literal>/etc/cron.daily/apt</literal> script. See the top of this script "
+"for the brief documentation of these options."
 msgstr ""
 "<literal>APT::Periodic</literal>- und <literal>APT::Archives</literal>-"
 "Gruppen von Optionen konfigurieren das Verhalten periodischer APT-"
@@ -4872,12 +5173,12 @@ msgstr ""
 "Dokumentation dieser Optionen zu erhalten."
 
 #. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:737
+#: apt.conf.5.xml:786
 msgid "Debug options"
 msgstr "Fehlersuchoptionen"
 
 #. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:739
+#: apt.conf.5.xml:788
 msgid ""
 "Enabling options in the <literal>Debug::</literal> section will cause "
 "debugging information to be sent to the standard error stream of the program "
@@ -4895,7 +5196,7 @@ msgstr ""
 "könnten es sein:"
 
 #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:750
+#: apt.conf.5.xml:799
 msgid ""
 "<literal>Debug::pkgProblemResolver</literal> enables output about the "
 "decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</"
@@ -4906,7 +5207,7 @@ msgstr ""
 "getroffenen Entscheidungen ein."
 
 #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:758
+#: apt.conf.5.xml:807
 msgid ""
 "<literal>Debug::NoLocking</literal> disables all file locking.  This can be "
 "used to run some operations (for instance, <literal>apt-get -s install</"
@@ -4917,7 +5218,7 @@ msgstr ""
 "<literal>apt-get -s install</literal>) als nicht root-Anwender auszuführen."
 
 #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:767
+#: apt.conf.5.xml:816
 msgid ""
 "<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each "
 "time that <literal>apt</literal> invokes &dpkg;."
@@ -4929,7 +5230,7 @@ msgstr ""
 #. 	   motivating example, except I haven't a clue why you'd want
 #. 	   to do this. 
 #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:775
+#: apt.conf.5.xml:824
 msgid ""
 "<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data "
 "in CD-ROM IDs."
@@ -4938,12 +5239,12 @@ msgstr ""
 "Daten in CD-ROM-IDs aus."
 
 #. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:785
+#: apt.conf.5.xml:834
 msgid "A full list of debugging options to apt follows."
 msgstr "Eine vollständige Liste der Fehlersuchoptionen von APT folgt."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:794
+#: apt.conf.5.xml:843
 msgid ""
 "Print information related to accessing <literal>cdrom://</literal> sources."
 msgstr ""
@@ -4951,28 +5252,28 @@ msgstr ""
 "literal>-Quellen beziehen."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:805
+#: apt.conf.5.xml:854
 msgid "Print information related to downloading packages using FTP."
 msgstr ""
 "gibt Informationen aus, die sich auf das Herunterladen von Paketen per FTP "
 "beziehen."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:816
+#: apt.conf.5.xml:865
 msgid "Print information related to downloading packages using HTTP."
 msgstr ""
 "gibt Informationen aus, die sich auf das Herunterladen von Paketen per HTTP "
 "beziehen."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:827
+#: apt.conf.5.xml:876
 msgid "Print information related to downloading packages using HTTPS."
 msgstr ""
 "gibt Informationen aus, die sich auf das Herunterladen von Paketen per HTTPS "
 "beziehen."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:838
+#: apt.conf.5.xml:887
 msgid ""
 "Print information related to verifying cryptographic signatures using "
 "<literal>gpg</literal>."
@@ -4981,7 +5282,7 @@ msgstr ""
 "mittels <literal>gpg</literal> beziehen."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:849
+#: apt.conf.5.xml:898
 msgid ""
 "Output information about the process of accessing collections of packages "
 "stored on CD-ROMs."
@@ -4990,13 +5291,13 @@ msgstr ""
 "CD-ROMs gespeichert sind."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:859
+#: apt.conf.5.xml:908
 msgid "Describes the process of resolving build-dependencies in &apt-get;."
 msgstr ""
 "beschreibt den Prozess der Auflösung von Bauabhängigkeiten in &apt-get;."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:869
+#: apt.conf.5.xml:918
 msgid ""
 "Output each cryptographic hash that is generated by the <literal>apt</"
 "literal> libraries."
@@ -5005,7 +5306,7 @@ msgstr ""
 "Bibliotheken generiert wurde."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:879
+#: apt.conf.5.xml:928
 msgid ""
 "Do not include information from <literal>statfs</literal>, namely the number "
 "of used and free blocks on the CD-ROM filesystem, when generating an ID for "
@@ -5016,7 +5317,7 @@ msgstr ""
 "ID für eine CD-ROM generiert wird."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:890
+#: apt.conf.5.xml:939
 msgid ""
 "Disable all file locking.  For instance, this will allow two instances of "
 "<quote><literal>apt-get update</literal></quote> to run at the same time."
@@ -5026,14 +5327,14 @@ msgstr ""
 "gleichen Zeit laufen."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:902
+#: apt.conf.5.xml:951
 msgid "Log when items are added to or removed from the global download queue."
 msgstr ""
 "protokolliert, wenn Elemente aus der globalen Warteschlange zum "
 "Herunterladen hinzugefügt oder entfernt werden."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:912
+#: apt.conf.5.xml:961
 msgid ""
 "Output status messages and errors related to verifying checksums and "
 "cryptographic signatures of downloaded files."
@@ -5042,7 +5343,7 @@ msgstr ""
 "und kryptografischen Signaturen von heruntergeladenen Dateien beziehen."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:922
+#: apt.conf.5.xml:971
 msgid ""
 "Output information about downloading and applying package index list diffs, "
 "and errors relating to package index list diffs."
@@ -5051,7 +5352,7 @@ msgstr ""
 "Diffs und Fehler, die die Paketindexlisten-Diffs betreffen, aus."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:934
+#: apt.conf.5.xml:983
 msgid ""
 "Output information related to patching apt package lists when downloading "
 "index diffs instead of full indices."
@@ -5061,7 +5362,7 @@ msgstr ""
 "werden."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:945
+#: apt.conf.5.xml:994
 msgid ""
 "Log all interactions with the sub-processes that actually perform downloads."
 msgstr ""
@@ -5069,7 +5370,7 @@ msgstr ""
 "durchführen."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:956
+#: apt.conf.5.xml:1005
 msgid ""
 "Log events related to the automatically-installed status of packages and to "
 "the removal of unused packages."
@@ -5079,7 +5380,7 @@ msgstr ""
 "beziehen."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:966
+#: apt.conf.5.xml:1015
 msgid ""
 "Generate debug messages describing which packages are being automatically "
 "installed to resolve dependencies.  This corresponds to the initial auto-"
@@ -5095,20 +5396,21 @@ msgstr ""
 "literal>."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:980
+#: apt.conf.5.xml:1029
 msgid ""
-"Generate debug messages describing which package is marked as keep/install/"
+"Generate debug messages describing which packages are marked as keep/install/"
 "remove while the ProblemResolver does his work.  Each addition or deletion "
-"may trigger additional actions; they are shown indented two additional space "
-"under the original entry.  The format for each line is <literal>MarkKeep</"
-"literal>, <literal>MarkDelete</literal> or <literal>MarkInstall</literal> "
-"followed by <literal>package-name &lt;a.b.c -&gt; d.e.f | x.y.z&gt; (section)"
-"</literal> where <literal>a.b.c</literal> is the current version of the "
-"package, <literal>d.e.f</literal> is the version considered for installation "
-"and <literal>x.y.z</literal> is a newer version, but not considered for "
-"installation (because of a low pin score). The later two can be omitted if "
-"there is none or if it is the same version as the installed.  "
-"<literal>section</literal> is the name of the section the package appears in."
+"may trigger additional actions; they are shown indented two additional "
+"spaces under the original entry.  The format for each line is "
+"<literal>MarkKeep</literal>, <literal>MarkDelete</literal> or "
+"<literal>MarkInstall</literal> followed by <literal>package-name &lt;a.b.c -"
+"&gt; d.e.f | x.y.z&gt; (section)</literal> where <literal>a.b.c</literal> is "
+"the current version of the package, <literal>d.e.f</literal> is the version "
+"considered for installation and <literal>x.y.z</literal> is a newer version, "
+"but not considered for installation (because of a low pin score). The later "
+"two can be omitted if there is none or if it is the same as the installed "
+"version.  <literal>section</literal> is the name of the section the package "
+"appears in."
 msgstr ""
 "generiert Fehlersuchmeldungen, die beschreiben, welches Paket als "
 "»keep«/»install«/»remove« markiert ist, während der ProblemResolver seine "
@@ -5127,13 +5429,7 @@ msgstr ""
 "erscheint."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1002
-msgid "Dump the default configuration to standard error on startup."
-msgstr ""
-"gibt die Vorgabekonfiguration beim Start auf der Standardfehlerausgabe aus."
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1012
+#: apt.conf.5.xml:1050
 msgid ""
 "When invoking &dpkg;, output the precise command line with which it is being "
 "invoked, with arguments separated by a single space character."
@@ -5143,7 +5439,7 @@ msgstr ""
 "sind, aus."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1023
+#: apt.conf.5.xml:1061
 msgid ""
 "Output all the data received from &dpkg; on the status file descriptor and "
 "any errors encountered while parsing it."
@@ -5152,7 +5448,7 @@ msgstr ""
 "und alle während deren Auswertung gefundenen Fehler aus."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1034
+#: apt.conf.5.xml:1072
 msgid ""
 "Generate a trace of the algorithm that decides the order in which "
 "<literal>apt</literal> should pass packages to &dpkg;."
@@ -5162,7 +5458,7 @@ msgstr ""
 "soll."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1046
+#: apt.conf.5.xml:1084
 msgid ""
 "Output status messages tracing the steps performed when invoking &dpkg;."
 msgstr ""
@@ -5170,12 +5466,12 @@ msgstr ""
 "von &dpkg; ausgeführt werden."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1057
+#: apt.conf.5.xml:1095
 msgid "Output the priority of each package list on startup."
 msgstr "gibt die Priorität jeder Paketliste beim Start aus."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1067
+#: apt.conf.5.xml:1105
 msgid ""
 "Trace the execution of the dependency resolver (this applies only to what "
 "happens when a complex dependency problem is encountered)."
@@ -5185,7 +5481,7 @@ msgstr ""
 "aufgetreten ist)."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1078
+#: apt.conf.5.xml:1116
 msgid ""
 "Display a list of all installed packages with their calculated score used by "
 "the pkgProblemResolver. The description of the package is the same as "
@@ -5197,7 +5493,7 @@ msgstr ""
 "Marker</literal> beschrieben."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1090
+#: apt.conf.5.xml:1128
 msgid ""
 "Print information about the vendors read from <filename>/etc/apt/vendors."
 "list</filename>."
@@ -5206,13 +5502,13 @@ msgstr ""
 "filename> gelesenen Anbieter aus."
 
 #. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:1112 apt_preferences.5.xml:545 sources.list.5.xml:211
+#: apt.conf.5.xml:1150 apt_preferences.5.xml:545 sources.list.5.xml:211
 #: apt-ftparchive.1.xml:596
 msgid "Examples"
 msgstr "Beispiele"
 
 #. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:1113
+#: apt.conf.5.xml:1151
 msgid ""
 "&configureindex; is a configuration file showing example values for all "
 "possible options."
@@ -5222,7 +5518,7 @@ msgstr ""
 
 #.  ? reading apt.conf 
 #. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:1125
+#: apt.conf.5.xml:1163
 msgid "&apt-cache;, &apt-config;, &apt-preferences;."
 msgstr "&apt-cache;, &apt-config;, &apt-preferences;."
 
@@ -5332,7 +5628,7 @@ msgid ""
 "literal>\" as filename extension and only contain alphanumeric, hyphen (-), "
 "underscore (_) and period (.) characters.  Otherwise APT will print a notice "
 "that it has ignored a file, unless that file matches a pattern in the "
-"<literal>Dir::Ignore-Files-Silently</literal> configuration list - in this "
+"<literal>Dir::Ignore-Files-Silently</literal> configuration list - in which "
 "case it will be silently ignored."
 msgstr ""
 "Beachten Sie, dass die Dateien im Verzeichnis <filename>/etc/apt/preferences."
@@ -6621,41 +6917,25 @@ msgid "Package resource list for APT"
 msgstr "Paketressourcenliste für APT"
 
 #. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:37
+#: sources.list.5.xml:38
 msgid ""
-"The package resource list is used to locate archives of the package "
-"distribution system in use on the system. At this time, this manual page "
-"documents only the packaging system used by the Debian system.  This control "
-"file is <filename>/etc/apt/sources.list</filename>."
+"The source list <filename>/etc/apt/sources.list</filename> is designed to "
+"support any number of active sources and a variety of source media. The file "
+"lists one source per line, with the most preferred source listed first. The "
+"information available from the configured sources is acquired by "
+"<command>apt-get update</command> (or by an equivalent command from another "
+"APT front-end)."
 msgstr ""
-"Die Paketquellenliste wird benutzt, um Archive des Paketverteilungssystems, "
-"das auf dem System benutzt wird, zu finden. Momentan dokumentiert diese "
-"Handbuchseite nur das vom Debian-GNU/Linux-System benutzte "
-"Paketierungssystem. Diese Steuerungsdatei ist <filename>/etc/apt/sources."
-"list</filename>."
 
 #. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:42
-msgid ""
-"The source list is designed to support any number of active sources and a "
-"variety of source media. The file lists one source per line, with the most "
-"preferred source listed first. The format of each line is: <literal>type uri "
-"args</literal> The first item, <literal>type</literal> determines the format "
-"for <literal>args</literal>. <literal>uri</literal> is a Universal Resource "
-"Identifier (URI), which is a superset of the more specific and well-known "
-"Universal Resource Locator, or URL. The rest of the line can be marked as a "
-"comment by using a #."
-msgstr ""
-"Die Quellenliste wurde entworfen, um eine beliebige Anzahl von aktiven "
-"Quellen und eine Vielzahl von Quellmedien zu unterstützen. Die Datei listet "
-"eine Quelle pro Zeile auf, wobei die bevorzugten Quellen zuerst aufgelistet "
-"sind. Das Format jeder Zeile lautet: <literal>Typ URI Argumente</literal>. "
-"Das erste Element <literal>Typ</literal> legt das Format für "
-"<literal>Argumente</literal> fest. <literal>URI</literal> ist ein "
-"universeller Quellenbezeichner »Universal Resource Identifier« (URI), der "
-"eine Obermenge des spezielleren und besser bekannten Universal Resource "
-"Locator (URL) ist. Der Rest der Zeile kann unter Verwendung von # als "
-"Kommentar markiert werden."
+#: sources.list.5.xml:45
+msgid ""
+"Each line specifying a source starts with type (e.g. <literal>deb-src</"
+"literal>)  followed by options and arguments for this type.  Individual "
+"entries cannot be continued onto a following line. Empty lines are ignored, "
+"and a <literal>#</literal> character anywhere on a line marks the remainder "
+"of that line as a comment."
+msgstr ""
 
 #. type: Content of: <refentry><refsect1><title>
 #: sources.list.5.xml:53
@@ -6672,7 +6952,7 @@ msgid ""
 "digits (0-9), underscore (_), hyphen (-) and period (.) characters.  "
 "Otherwise APT will print a notice that it has ignored a file, unless that "
 "file matches a pattern in the <literal>Dir::Ignore-Files-Silently</literal> "
-"configuration list - in this case it will be silently ignored."
+"configuration list - in which case it will be silently ignored."
 msgstr ""
 "Das Verzeichnis <filename>/etc/apt/sources.list.d</filename> stellt eine "
 "Möglichkeit bereit, sources.list-Einträge in separaten Dateien hinzuzufügen. "
@@ -6692,16 +6972,16 @@ msgstr "Die Typen deb und deb-src"
 #. type: Content of: <refentry><refsect1><para>
 #: sources.list.5.xml:66
 msgid ""
-"The <literal>deb</literal> type describes a typical two-level Debian "
-"archive, <filename>distribution/component</filename>. Typically, "
-"<literal>distribution</literal> is generally an archivename like "
+"The <literal>deb</literal> type references a typical two-level Debian "
+"archive, <filename>distribution/component</filename>. The "
+"<literal>distribution</literal> is generally an archive name like "
 "<literal>stable</literal> or <literal>testing</literal> or a codename like "
 "<literal>&stable-codename;</literal> or <literal>&testing-codename;</"
-"literal> while component is one of <literal>main</literal> <literal>contrib</"
-"literal> or <literal>non-free</literal>. The <literal>deb-src</literal> type "
-"describes a debian distribution's source code in the same form as the "
-"<literal>deb</literal> type.  A <literal>deb-src</literal> line is required "
-"to fetch source indexes."
+"literal> while component is one of <literal>main</literal>, "
+"<literal>contrib</literal> or <literal>non-free</literal>. The <literal>deb-"
+"src</literal> type references a Debian distribution's source code in the "
+"same form as the <literal>deb</literal> type.  A <literal>deb-src</literal> "
+"line is required to fetch source indexes."
 msgstr ""
 "Der <literal>deb</literal>-Typ beschreibt ein typisches zweistufiges Debian-"
 "Archiv, <filename>Distribution/Komponente</filename>. <literal>Distribution</"
@@ -6736,32 +7016,42 @@ msgid ""
 "Debian distribution, from which APT will find the information it needs.  "
 "<literal>distribution</literal> can specify an exact path, in which case the "
 "components must be omitted and <literal>distribution</literal> must end with "
-"a slash (/). This is useful for when the case only a particular sub-section "
-"of the archive denoted by the URI is of interest.  If <literal>distribution</"
-"literal> does not specify an exact path, at least one <literal>component</"
-"literal> must be present."
+"a slash (<literal>/</literal>). This is useful for the case when only a "
+"particular sub-section of the archive denoted by the URI is of interest.  If "
+"<literal>distribution</literal> does not specify an exact path, at least one "
+"<literal>component</literal> must be present."
 msgstr ""
 "Die URI für den <literal>deb</literal>-Typ muss die Basis der Debian-"
 "Distribution angeben, wo APT die Informationen findet, die es benötigt. "
 "<literal>Distribution</literal> kann einen genauen Pfad angeben. In diesem "
 "Fall müssen die Komponenten weggelassen werden und <literal>Distribution</"
-"literal> muss mit einem Schrägstrich (/) enden. Dies ist nützlich, wenn nur "
-"ein bestimmter Unterabschnitt des von der URI angegebenen Archivs von "
-"Interesse ist. Wenn <literal>Distribution</literal> keinen genauen Pfad "
-"angibt, muss mindestens eine <literal>Komponente</literal> angegeben sein."
+"literal> muss mit einem Schrägstrich (<literal>/</literal>) enden. Dies ist "
+"nützlich, wenn nur ein bestimmter Unterabschnitt des von der URI angegebenen "
+"Archivs von Interesse ist. Wenn <literal>Distribution</literal> keinen "
+"genauen Pfad angibt, muss mindestens eine <literal>Komponente</literal> "
+"angegeben sein."
 
 #. type: Content of: <refentry><refsect1><para>
 #: sources.list.5.xml:92
+#, fuzzy
+#| msgid ""
+#| "<literal>distribution</literal> may also contain a variable, <literal>"
+#| "$(ARCH)</literal> which expands to the Debian architecture (i386, amd64, "
+#| "powerpc, ...)  used on the system. This permits architecture-independent "
+#| "<filename>sources.list</filename> files to be used. In general this is "
+#| "only of interest when specifying an exact path, <literal>APT</literal> "
+#| "will automatically generate a URI with the current architecture otherwise."
 msgid ""
 "<literal>distribution</literal> may also contain a variable, <literal>$(ARCH)"
-"</literal> which expands to the Debian architecture (i386, m68k, "
-"powerpc, ...)  used on the system. This permits architecture-independent "
-"<filename>sources.list</filename> files to be used. In general this is only "
-"of interest when specifying an exact path, <literal>APT</literal> will "
-"automatically generate a URI with the current architecture otherwise."
+"</literal> which expands to the Debian architecture (such as <literal>amd64</"
+"literal> or <literal>armel</literal>) used on the system. This permits "
+"architecture-independent <filename>sources.list</filename> files to be used. "
+"In general this is only of interest when specifying an exact path, "
+"<literal>APT</literal> will automatically generate a URI with the current "
+"architecture otherwise."
 msgstr ""
 "<literal>Distribution</literal> könnte außerdem eine Variable, <literal>"
-"$(ARCH)</literal>, enthalten, die zur Debian-Architektur (i386, m68k, "
+"$(ARCH)</literal>, enthalten, die zur Debian-Architektur (i386, amd64, "
 "powerpc, …) expandiert wird, die auf dem System benutzt wird. Dies erlaubt "
 "es, architekturabhängige <filename>sources.list</filename>-Dateien zu "
 "benutzen. Im Allgemeinen ist dies nur von Interesse, wenn ein genauer Pfad "
@@ -6798,12 +7088,12 @@ msgstr ""
 #. type: Content of: <refentry><refsect1><para>
 #: sources.list.5.xml:112
 msgid ""
-"<literal>options</literal> is always optional and needs to be surounded by "
+"<literal>options</literal> is always optional and needs to be surrounded by "
 "square brackets. It can consist of multiple settings in the form "
 "<literal><replaceable>setting</replaceable>=<replaceable>value</"
 "replaceable></literal>.  Multiple settings are separated by spaces. The "
-"following settings are supported by APT, note though that unsupported "
-"settings will be ignored silently:"
+"following settings are supported by APT (note however that unsupported "
+"settings will be ignored silently):"
 msgstr ""
 "<literal>options</literal> ist immer optional und muss in eckige Klammern "
 "eingeschlossen werden. Es kann aus mehreren Einstellungen in der Form "
@@ -6818,7 +7108,7 @@ msgstr ""
 msgid ""
 "<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
 "replaceable>,…</literal> can be used to specify for which architectures "
-"packages information should be downloaded. If this option is not set all "
+"information should be downloaded. If this option is not set all "
 "architectures defined by the <literal>APT::Architectures</literal> option "
 "will be downloaded."
 msgstr ""
@@ -6930,13 +7220,23 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
 #: sources.list.5.xml:172
+#, fuzzy
+#| msgid ""
+#| "The ftp scheme specifies an FTP server for the archive. APT's FTP "
+#| "behavior is highly configurable; for more information see the &apt-conf; "
+#| "manual page. Please note that a ftp proxy can be specified by using the "
+#| "<envar>ftp_proxy</envar> environment variable. It is possible to specify "
+#| "a http proxy (http proxy servers often understand ftp urls)  using this "
+#| "method and ONLY this method. ftp proxies using http specified in the "
+#| "configuration file will be ignored."
 msgid ""
 "The ftp scheme specifies an FTP server for the archive. APT's FTP behavior "
 "is highly configurable; for more information see the &apt-conf; manual page. "
-"Please note that a ftp proxy can be specified by using the <envar>ftp_proxy</"
-"envar> environment variable. It is possible to specify a http proxy (http "
-"proxy servers often understand ftp urls)  using this method and ONLY this "
-"method. ftp proxies using http specified in the configuration file will be "
+"Please note that an FTP proxy can be specified by using the "
+"<envar>ftp_proxy</envar> environment variable. It is possible to specify an "
+"HTTP proxy (HTTP proxy servers often understand FTP URLs)  using this "
+"environment variable and <emphasis>ONLY</emphasis> this environment "
+"variable. Proxies using HTTP specified in the configuration file will be "
 "ignored."
 msgstr ""
 "Das ftp-Schema gibt einen FTP-Server für das Archiv an. Das FTP-Verhalten "
@@ -6949,11 +7249,18 @@ msgstr ""
 "Konfigurationsdatei HTTP benutzen, werden ignoriert."
 
 #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:183
+#: sources.list.5.xml:184
+#, fuzzy
+#| msgid ""
+#| "The copy scheme is identical to the file scheme except that packages are "
+#| "copied into the cache directory instead of used directly at their "
+#| "location.  This is useful for people using a zip disk to copy files "
+#| "around with APT."
 msgid ""
 "The copy scheme is identical to the file scheme except that packages are "
 "copied into the cache directory instead of used directly at their location.  "
-"This is useful for people using a zip disk to copy files around with APT."
+"This is useful for people using removable media to copy files around with "
+"APT."
 msgstr ""
 "Das copy-Schema ist identisch mit dem file-Schema, außer dass Pakete in das "
 "Zwischenspeicherverzeichnis kopiert werden, anstatt direkt von ihrem "
@@ -6961,13 +7268,19 @@ msgstr ""
 "Platte benutzen, um Dateien mit APT umherzukopieren."
 
 #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:190
+#: sources.list.5.xml:191
+#, fuzzy
+#| msgid ""
+#| "The rsh/ssh method invokes rsh/ssh to connect to a remote host as a given "
+#| "user and access the files. It is a good idea to do prior arrangements "
+#| "with RSA keys or rhosts.  Access to files on the remote uses standard "
+#| "<command>find</command> and <command>dd</command> commands to perform the "
+#| "file transfers from the remote."
 msgid ""
-"The rsh/ssh method invokes rsh/ssh to connect to a remote host as a given "
-"user and access the files. It is a good idea to do prior arrangements with "
-"RSA keys or rhosts.  Access to files on the remote uses standard "
-"<command>find</command> and <command>dd</command> commands to perform the "
-"file transfers from the remote."
+"The rsh/ssh method invokes RSH/SSH to connect to a remote host and access "
+"the files as a given user. Prior configuration of rhosts or RSA keys is "
+"recommended. The standard <command>find</command> and <command>dd</command> "
+"commands are used to perform the file transfers from the remote host."
 msgstr ""
 "Die rsh/ssh-Methode ruft rsh/ssh auf, um sich als angegebener Benutzer mit "
 "einem Rechner in der Ferne zu verbinden und auf die Dateien zuzugreifen. Es "
@@ -6985,13 +7298,22 @@ msgstr "weitere erkennbare URI-Typen"
 
 #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
 #: sources.list.5.xml:200
-msgid ""
-"APT can be extended with more methods shipped in other optional packages "
-"which should follow the nameing scheme <package>apt-transport-"
-"<replaceable>method</replaceable></package>.  The APT team e.g. maintains "
-"also the <package>apt-transport-https</package> package which provides "
-"access methods for https-URIs with features similar to the http method, but "
-"other methods for using e.g. debtorrent are also available, see &apt-"
+#, fuzzy
+#| msgid ""
+#| "APT can be extended with more methods shipped in other optional packages "
+#| "which should follow the nameing scheme <package>apt-transport-"
+#| "<replaceable>method</replaceable></package>.  The APT team e.g. maintains "
+#| "also the <package>apt-transport-https</package> package which provides "
+#| "access methods for https-URIs with features similar to the http method, "
+#| "but other methods for using e.g. debtorrent are also available, see &apt-"
+#| "transport-debtorrent;."
+msgid ""
+"APT can be extended with more methods shipped in other optional packages, "
+"which should follow the naming scheme <package>apt-transport-"
+"<replaceable>method</replaceable></package>.  For instance, the APT team "
+"also maintains the package <package>apt-transport-https</package>, which "
+"provides access methods for HTTPS URIs with features similar to the http "
+"method.  Methods for using e.g. debtorrent are also available - see &apt-"
 "transport-debtorrent;."
 msgstr ""
 "APT kann mit weiteren Methoden, die in anderen optionalen Paketen geliefert "
@@ -7233,7 +7555,10 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt-sortpkgs.1.xml:45
-msgid "All output is sent to stdout, the input must be a seekable file."
+#, fuzzy
+#| msgid "All output is sent to stdout, the input must be a seekable file."
+msgid ""
+"All output is sent to standard output; the input must be a seekable file."
 msgstr ""
 "Alle Ausgaben werden an stdout gesendet, die Eingabe muss eine durchsuchbare "
 "Datei sein."
@@ -9919,6 +10244,151 @@ msgstr "  # apt-get -o dir::cache::archives=\"/Platte/\" dist-upgrade"
 msgid "Which will use the already fetched archives on the disc."
 msgstr "Es wird die bereits auf die Platte heruntergeladenen Archive benutzen."
 
+#~ msgid ""
+#~ "All Architectures the system supports. Processors implementing the "
+#~ "<literal>amd64</literal> (also called <literal>x86-64</literal>) "
+#~ "instruction set are e.g. also able to execute binaries compiled for the "
+#~ "<literal>i386</literal> (<literal>x86</literal>) instruction set; This "
+#~ "list is use when fetching files and parsing package lists. The internal "
+#~ "default is always the native architecture (<literal>APT::Architecture</"
+#~ "literal>)  and all foreign architectures it can retrieve by calling "
+#~ "<command>dpkg --print-foreign-architectures</command>."
+#~ msgstr ""
+#~ "alle Architekturen, die das System unterstützt. Prozessoren, die "
+#~ "<literal>amd64</literal>-Befehlssätze implementieren (auch "
+#~ "<literal>x86-64</literal> genannt) sind beispielsweise ebenso in der "
+#~ "Lage, Programme auszuführen, die für <literal>i386</literal>-Befehlssätzt "
+#~ "(<literal>x86</literal>) kompiliert wurden. Diese Liste wird benutzt, "
+#~ "wenn Dateien abgerufen und Paketlisten ausgewertet werden. Die interne "
+#~ "Vorgabe ist immer die native Architektur (<literal>APT::Architecture</"
+#~ "literal>) und alle fremden Architekturen, die durch Aufruf von "
+#~ "<command>dpkg --print-foreign-architectures</command> abgefragt werden "
+#~ "können."
+
+#~ msgid ""
+#~ "As the configuration can be deferred to be done at the end by &dpkg; it "
+#~ "can be tried to order the unpack series only by critical needs, e.g. by "
+#~ "Pre-Depends. Default is true and therefore the \"old\" method of ordering "
+#~ "in various steps by everything. While both method were present in earlier "
+#~ "APT versions the <literal>OrderCritical</literal> method was unused, so "
+#~ "this method is very experimental and needs further improvements before "
+#~ "becoming really useful."
+#~ msgstr ""
+#~ "Da die Konfiguration an das Ende von Dpkg verschoben werden kann, kann "
+#~ "versucht werden, nur die Entpackserien von kritischen Notwendigkeiten, z."
+#~ "B. von Pre-Depends, anzuweisen. Vorgabe ist true und daher die »alte« "
+#~ "Methode zum Sortieren nach allem in mehreren Schritten. Obwohl in "
+#~ "früheren Versionen von APT beide Methoden enthalten waren, wurde die "
+#~ "<literal>OrderCritical</literal>-Methode nicht benutzt, so dass diese "
+#~ "Methode sehr experimentell ist und weitere Verbesserungen benötigt, bevor "
+#~ "sie wirklich nützlich wird."
+
+#~ msgid "Dump the default configuration to standard error on startup."
+#~ msgstr ""
+#~ "gibt die Vorgabekonfiguration beim Start auf der Standardfehlerausgabe "
+#~ "aus."
+
+#~ msgid ""
+#~ "Defaults to on which will cause APT to install essential and important "
+#~ "packages as fast as possible in the install/upgrade operation. This is "
+#~ "done to limit the effect of a failing &dpkg; call: If this option is "
+#~ "disabled APT does treat an important package in the same way as an extra "
+#~ "package: Between the unpacking of the important package A and his "
+#~ "configuration can then be many other unpack or configuration calls, e.g. "
+#~ "for package B which has no relation to A, but causes the dpkg call to "
+#~ "fail (e.g. because maintainer script of package B generates an error) "
+#~ "which results in a system state in which package A is unpacked but "
+#~ "unconfigured - each package depending on A is now no longer guaranteed to "
+#~ "work as their dependency on A is not longer satisfied. The immediate "
+#~ "configuration marker is also applied to all dependencies which can "
+#~ "generate a problem if the dependencies e.g. form a circle as a dependency "
+#~ "with the immediate flag is comparable with a Pre-Dependency. So in theory "
+#~ "it is possible that APT encounters a situation in which it is unable to "
+#~ "perform immediate configuration, errors out and refers to this option so "
+#~ "the user can deactivate the immediate configuration temporarily to be "
+#~ "able to perform an install/upgrade again. Note the use of the word "
+#~ "\"theory\" here as this problem was only encountered by now in real world "
+#~ "a few times in non-stable distribution versions and was caused by wrong "
+#~ "dependencies of the package in question or by a system in an already "
+#~ "broken state, so you should not blindly disable this option as the "
+#~ "mentioned scenario above is not the only problem immediate configuration "
+#~ "can help to prevent in the first place.  Before a big operation like "
+#~ "<literal>dist-upgrade</literal> is run with this option disabled it "
+#~ "should be tried to explicitly <literal>install</literal> the package APT "
+#~ "is unable to configure immediately, but please make sure to report your "
+#~ "problem also to your distribution and to the APT team with the buglink "
+#~ "below so they can work on improving or correcting the upgrade process."
+#~ msgstr ""
+#~ "standardmäßig »on«, wodurch APT veranlasst wird, »essential«- oder "
+#~ "»important«-Pakete so schnell wie möglich in der »install«-/»upgrade«-"
+#~ "Operation zu installieren. Dies wird getan, um den Effekt eines "
+#~ "gescheiterterten &dpkg;-Aufrufs zu begrenzen: Wenn diese Option "
+#~ "ausgeschaltet ist, behandelt APT ein »important«-Paket auf die gleiche "
+#~ "Weise wie ein »extra«-Paket: Zwischen dem Entpacken des »important«-"
+#~ "Pakets A und seiner Konfiguration können dann viele andere Entpack- oder "
+#~ "Konfigurationsaufrufe liegen, z.B. für Paket B, das keine Beziehung zu A "
+#~ "hat, aber den dpkg-Aufruf zum Scheitern bringt (z.B. weil das "
+#~ "Betreuerskript von Paket B Fehler generiert), die als Ergebnis einen "
+#~ "Systemstatus haben, in dem Paket A entpackt, aber nicht konfiguriert ist "
+#~ "und für kein von A abhängendes Paket länger gewährleistet ist, dass es "
+#~ "funktioniert, weil die Abhängigkeit zu A nicht länger befriedigt wird. "
+#~ "Das unmittelbare Konfigurationskennzeichen wird außerdem auf alle "
+#~ "Abhängigkeiten angewandt, was zu einem Problem führen könnten, falls die "
+#~ "Abhängigkeiten z.B. einen Kreis bilden, so dass eine Abhängigkeit mit der "
+#~ "Unmittelbarmarkierung mit einer Vorabhängigkeit vergleichbar ist. So ist "
+#~ "es theoretisch möglich, dass APT einer Situation begegnet, in der keine "
+#~ "unmittelbare Konfiguration durchgeführt, ein Fehler ausgegeben und sich "
+#~ "auf diese Option bezogen werden kann, so dass der Anwender die "
+#~ "unmittelbare Konfiguration zeitweise deaktivieren kann, um in der Lage zu "
+#~ "sein, erneut ein »install«/»upgrade« durchzuführen. Beachten Sie, dass "
+#~ "hier das Wort »theoretisch« benutzt wird, denn dieses Problem ist bis "
+#~ "jetzt in der Realität nur ein paar mal in unstabilen "
+#~ "Distributionsversionen aufgetreten und wurde durch falsche Abhängigkeiten "
+#~ "des fraglichen Pakets ausgelöst oder durch ein System in bereits kaputtem "
+#~ "Status, so dass Sie diese Option nicht unbesehen abschalten sollten, da "
+#~ "das oben erwähnte Szenario nicht das einzige unmittelbare Problem ist, "
+#~ "das die Konfiguration überhaupt verhindern sollte. Bevor eine große "
+#~ "Operation wie <literal>dist-upgrade</literal> mit dieser ausgeschalteten "
+#~ "Option ausgeführt wird, sollte explizit versucht werden, "
+#~ "<literal>install</literal> des Pakets durchzuführen. APT ist nicht in der "
+#~ "Lage unmittelbar zu konfigurieren, aber stellen Sie sicher, dass Sie Ihr "
+#~ "Problem außerdem an Ihre Distribution und an das APT-Team berichten mit "
+#~ "nachstehendem Fehlerverweis, so dass es am Verbessern oder Korrigieren "
+#~ "des Upgrade-Prozesses arbeiten kann."
+
+#~ msgid ""
+#~ "The package resource list is used to locate archives of the package "
+#~ "distribution system in use on the system. At this time, this manual page "
+#~ "documents only the packaging system used by the Debian system.  This "
+#~ "control file is <filename>/etc/apt/sources.list</filename>."
+#~ msgstr ""
+#~ "Die Paketquellenliste wird benutzt, um Archive des "
+#~ "Paketverteilungssystems, das auf dem System benutzt wird, zu finden. "
+#~ "Momentan dokumentiert diese Handbuchseite nur das vom Debian-GNU/Linux-"
+#~ "System benutzte Paketierungssystem. Diese Steuerungsdatei ist <filename>/"
+#~ "etc/apt/sources.list</filename>."
+
+#~ msgid ""
+#~ "The source list is designed to support any number of active sources and a "
+#~ "variety of source media. The file lists one source per line, with the "
+#~ "most preferred source listed first. The format of each line is: "
+#~ "<literal>type uri args</literal> The first item, <literal>type</literal> "
+#~ "determines the format for <literal>args</literal>. <literal>uri</literal> "
+#~ "is a Universal Resource Identifier (URI), which is a superset of the more "
+#~ "specific and well-known Universal Resource Locator, or URL. The rest of "
+#~ "the line can be marked as a comment by using a #."
+#~ msgstr ""
+#~ "Die Quellenliste wurde entworfen, um eine beliebige Anzahl von aktiven "
+#~ "Quellen und eine Vielzahl von Quellmedien zu unterstützen. Die Datei "
+#~ "listet eine Quelle pro Zeile auf, wobei die bevorzugten Quellen zuerst "
+#~ "aufgelistet sind. Das Format jeder Zeile lautet: <literal>Typ URI "
+#~ "Argumente</literal>. Das erste Element <literal>Typ</literal> legt das "
+#~ "Format für <literal>Argumente</literal> fest. <literal>URI</literal> ist "
+#~ "ein universeller Quellenbezeichner »Universal Resource Identifier« (URI), "
+#~ "der eine Obermenge des spezielleren und besser bekannten Universal "
+#~ "Resource Locator (URL) ist. Der Rest der Zeile kann unter Verwendung von "
+#~ "# als Kommentar markiert werden."
+
 #, fuzzy
 #~ msgid ""
 #~ "The currently recognized URI types are cdrom, file, http, ftp, copy, ssh, "