German updated (Chris Leick). Closes: #673410

1 files changed, 64 insertions, 487 deletions

diff --git a/doc/po/de.po b/doc/po/de.po
index 040baac57..c1db3ac79 100644
--- a/doc/po/de.po
+++ b/doc/po/de.po
@@ -1,14 +1,14 @@
 # Translation of apt-doc to German
 # Copyright (C) 1997, 1998, 1999 Jason Gunthorpe and others.
 # This file is distributed under the same license as the apt-doc package.
-# Chris Leick <c.leick@vollbio.de>, 2009-2011.
+# Chris Leick <c.leick@vollbio.de>, 2009-2012.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: apt-doc 0.8.15-9\n"
+"Project-Id-Version: apt-doc 0.9.3\n"
 "Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
 "POT-Creation-Date: 2012-05-11 17:16+0300\n"
-"PO-Revision-Date: 2011-11-13 11:21+0100\n"
+"PO-Revision-Date: 2012-05-18 12:10+0100\n"
 "Last-Translator: Chris Leick <c.leick@vollbio.de>\n"
 "Language-Team: German <debian-l10n-german@lists.debian.org>\n"
 "Language: de\n"
@@ -658,14 +658,14 @@ msgstr ""
 msgid ""
 "<!-- TRANSLATOR: used as in -o=config_string e.g. -o=Debug::"
 "pkgProblemResolver=1 --> <!ENTITY synopsis-config-string \"config_string\">"
-msgstr ""
+msgstr "<!ENTITY synopsis-config-string \"Konfigurationszeichenkette\">"
 
 #. type: Plain text
 #: apt.ent:217
 msgid ""
 "<!-- TRANSLATOR: used as in -c=config_file e.g. -c=./apt.conf --> <!ENTITY "
 "synopsis-config-file \"config_file\">"
-msgstr ""
+msgstr "<!ENTITY synopsis-config-file \"Konfigurationsdatei\">"
 
 #. type: Plain text
 #: apt.ent:220
@@ -673,49 +673,49 @@ msgid ""
 "<!-- TRANSLATOR: used as in -t=target_release or pkg/target_release e.g. -"
 "t=squeeze apt/experimental --> <!ENTITY synopsis-target-release "
 "\"target_release\">"
-msgstr ""
+msgstr "<!ENTITY synopsis-target-release \"Ziel-Release\">"
 
 #. type: Plain text
 #: apt.ent:223
 msgid ""
 "<!-- TRANSLATOR: used as in -a=architecture e.g. -a=armel --> <!ENTITY "
 "synopsis-architecture \"architecture\">"
-msgstr ""
+msgstr "<!ENTITY synopsis-architecture \"Architektur\">"
 
 #. type: Plain text
 #: apt.ent:226
 msgid ""
 "<!-- TRANSLATOR: used as in apt-get install pkg e.g. apt-get install awesome "
 "--> <!ENTITY synopsis-pkg \"pkg\">"
-msgstr ""
+msgstr "<!ENTITY synopsis-pkg \"Paket\">"
 
 #. type: Plain text
 #: apt.ent:229
 msgid ""
 "<!-- TRANSLATOR: used as in pkg=pkg_version_number e.g. apt=0.8.15 --> <!"
 "ENTITY synopsis-pkg-ver-number \"pkg_version_number\">"
-msgstr ""
+msgstr "<!ENTITY synopsis-pkg-ver-number \"Paketversionsnummer\">"
 
 #. type: Plain text
 #: apt.ent:232
 msgid ""
 "<!-- TRANSLATOR: used as in apt-cache pkgnames prefix e.g. apt-cache "
 "pkgnames apt --> <!ENTITY synopsis-prefix \"prefix\">"
-msgstr ""
+msgstr "<!ENTITY synopsis-prefix \"Präfix\">"
 
 #. type: Plain text
 #: apt.ent:235
 msgid ""
 "<!-- TRANSLATOR: used as in apt-cache search regex e.g. apt-cache search "
 "awesome --> <!ENTITY synopsis-regex \"regex\">"
-msgstr ""
+msgstr "<!ENTITY synopsis-regex \"regulärer_Ausdruck\">"
 
 #. type: Plain text
 #: apt.ent:238
 msgid ""
 "<!-- TRANSLATOR: used as in apt-cdrom -d=cdrom_mount_point e.g. apt-cdrom -"
 "d=/media/cdrom --> <!ENTITY synopsis-cdrom-mount \"cdrom_mount_point\">"
-msgstr ""
+msgstr "<!ENTITY synopsis-cdrom-mount \"CD-ROM-Einhängepunkt\">"
 
 #. type: Plain text
 #: apt.ent:241
@@ -723,14 +723,14 @@ msgid ""
 "<!-- TRANSLATOR: used as in apt-extracttemplates -t=temporary_directory e.g. "
 "apt-extracttemplates -t=/tmp --> <!ENTITY synopsis-tmp-directory "
 "\"temporary_directory\">"
-msgstr ""
+msgstr "<!ENTITY synopsis-tmp-directory \"temporäres_Verzeichnis\">"
 
 #. type: Plain text
 #: apt.ent:244
 msgid ""
 "<!-- TRANSLATOR: used as in apt-extracttemplates filename --> <!ENTITY "
 "synopsis-filename \"filename\">"
-msgstr ""
+msgstr "<!ENTITY synopsis-filename \"Dateiname\">"
 
 #. type: Plain text
 #: apt.ent:250
@@ -740,13 +740,16 @@ msgid ""
 "ENTITY synopsis-pathprefix \"pathprefix\"> <!ENTITY synopsis-section "
 "\"section\"> <!ENTITY synopsis-override \"override\">"
 msgstr ""
+"<!ENTITY synopsis-path \"Pfad\"> <!ENTITY synopsis-pathprefix \"Pfadpräfix"
+"\"> <!ENTITY synopsis-section \"Abschnitt\"><!ENTITY synopsis-override "
+"\"außer_Kraft_setzen\">"
 
 #. type: Plain text
 #: apt.ent:253
 msgid ""
 "<!-- TRANSLATOR: used as in apt-key export keyid e.g. apt-key export "
 "473041FA --> <!ENTITY synopsis-keyid \"keyid\">"
-msgstr ""
+msgstr "<!ENTITY synopsis-keyid \"Schlüsselkennung\">"
 
 #.  The last update date 
 #. type: Content of: <refentry><refentryinfo>
@@ -1447,13 +1450,6 @@ msgstr "<option>--no-enhances</option>"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-cache.8.xml:291
-#, fuzzy
-#| msgid ""
-#| "Per default the <literal>depends</literal> and <literal>rdepends</"
-#| "literal> print all dependencies. This can be tweaked with these flags "
-#| "which will omit the specified dependency type.  Configuration Item: "
-#| "<literal>APT::Cache::Show<replaceable>DependencyType</replaceable></"
-#| "literal> e.g. <literal>APT::Cache::ShowRecommends</literal>."
 msgid ""
 "Per default the <literal>depends</literal> and <literal>rdepends</literal> "
 "print all dependencies. This can be tweaked with these flags which will omit "
@@ -2000,10 +1996,8 @@ msgstr "Nur der Inhalt des Konfigurationsbereichs wird angezeigt."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
 #: apt-config.8.xml:89
-#, fuzzy
-#| msgid "<option>-y</option>"
 msgid "<option>--empty</option>"
-msgstr "<option>-y</option>"
+msgstr "<option>--empty</option>"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-config.8.xml:90
@@ -2011,6 +2005,8 @@ msgid ""
 "Include options which have an empty value. This is the default, so use --no-"
 "empty to remove them from the output."
 msgstr ""
+"schließt Optionen ein, die einen leeren Wert haben. Dies ist die Vorgabe, "
+"benutzen Sie daher --no-empty, um sie aus der Ausgabe zu entfernen."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
 #: apt-config.8.xml:95
@@ -2018,6 +2014,8 @@ msgid ""
 "<option>--format '<replaceable>&percnt;f &#x0022;&percnt;v&#x0022;;&percnt;"
 "n</replaceable>'</option>"
 msgstr ""
+"<option>--format '<replaceable>&percnt;f &#x0022;&percnt;v&#x0022;;&percnt;"
+"n</replaceable>'</option>"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-config.8.xml:96
@@ -2028,6 +2026,13 @@ msgid ""
 "be quoted. Additionally &percnt;n will be replaced by a newline, &percnt;N "
 "by a tab. A &percnt; can be printed by using &percnt;&percnt;."
 msgstr ""
+"definiert die Ausgabe jeder Option. &percnt;t wird durch den "
+"Markierungsnamen ersetzt, &percnt;f durch den kompletten Markierungsnamen "
+"und &percnt;v durch den Wert der Option. Benutzen Sie großgeschriebene "
+"Buchstaben, damit die jeweiligen Werte in Anführungszeichen gesetzt werden. "
+"&percnt;n wird zusätzlich durch einen Zeilenumbruch ersetzt, &percnt;N durch "
+"einen Tabulator. Ein &percnt; kann mittels &percnt;&percnt; ausgegeben "
+"werden."
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt-config.8.xml:109 apt-extracttemplates.1.xml:70 apt-ftparchive.1.xml:608
@@ -3141,18 +3146,6 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-ftparchive.1.xml:510
-#, fuzzy
-#| msgid ""
-#| "Generate the given checksum. These options default to on, when turned off "
-#| "the generated index files will not have the checksum fields where "
-#| "possible.  Configuration Items: <literal>APT::FTPArchive::"
-#| "<replaceable>Checksum</replaceable></literal> and <literal>APT::"
-#| "FTPArchive::<replaceable>Index</replaceable>::<replaceable>Checksum</"
-#| "replaceable></literal> where <literal><replaceable>Index</replaceable></"
-#| "literal> can be <literal>Packages</literal>, <literal>Sources</literal> "
-#| "or <literal>Release</literal> and <literal><replaceable>Checksum</"
-#| "replaceable></literal> can be <literal>MD5</literal>, <literal>SHA1</"
-#| "literal> or <literal>SHA256</literal>."
 msgid ""
 "Generate the given checksum. These options default to on, when turned off "
 "the generated index files will not have the checksum fields where possible.  "
@@ -3709,13 +3702,6 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-get.8.xml:179
-#, fuzzy
-#| msgid ""
-#| "If the <option>--compile</option> option is specified then the package "
-#| "will be compiled to a binary .deb using <command>dpkg-buildpackage</"
-#| "command> for the architecture as defined by the <command>--host-"
-#| "architecture</command> option.  If <option>--download-only</option> is "
-#| "specified then the source package will not be unpacked."
 msgid ""
 "If the <option>--compile</option> option is specified then the package will "
 "be compiled to a binary .deb using <command>dpkg-buildpackage</command> for "
@@ -3763,13 +3749,6 @@ msgstr "build-dep"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-get.8.xml:198
-#, fuzzy
-#| msgid ""
-#| "<literal>build-dep</literal> causes apt-get to install/remove packages in "
-#| "an attempt to satisfy the build dependencies for a source package. By "
-#| "default the dependencies are satisfied to build the package natively. If "
-#| "desired a host-architecture can be specified with the <option>--host-"
-#| "architecture</option> option instead."
 msgid ""
 "<literal>build-dep</literal> causes apt-get to install/remove packages in an "
 "attempt to satisfy the build dependencies for a source package. By default "
@@ -3805,10 +3784,6 @@ msgstr "download"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-get.8.xml:210
-#, fuzzy
-#| msgid ""
-#| "<literal>download</literal> will download the given binary package into "
-#| "the current directory."
 msgid ""
 "<literal>download</literal> will download the given binary package into the "
 "current directory."
@@ -3867,11 +3842,6 @@ msgstr "autoremove"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-get.8.xml:236
-#, fuzzy
-#| msgid ""
-#| "<literal>autoremove</literal> is used to remove packages that were "
-#| "automatically installed to satisfy dependencies for other packages and "
-#| "are now no longer needed."
 msgid ""
 "<literal>autoremove</literal> is used to remove packages that were "
 "automatically installed to satisfy dependencies for other packages and are "
@@ -4137,23 +4107,17 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
 #: apt-get.8.xml:353
-#, fuzzy
-#| msgid "<option>--assume-yes</option>"
 msgid "<option>--assume-no</option>"
-msgstr "<option>--assume-yes</option>"
+msgstr "<option>--assume-no</option>"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-get.8.xml:354
-#, fuzzy
-#| msgid ""
-#| "Compile source packages after downloading them.  Configuration Item: "
-#| "<literal>APT::Get::Compile</literal>."
 msgid ""
 "Automatic \"no\" to all prompts.  Configuration Item: <literal>APT::Get::"
 "Assume-No</literal>."
 msgstr ""
-"Kompiliert Quellpakete, nachdem sie heruntergeladen wurden. "
-"Konfigurationselement: <literal>APT::Get::Compile</literal>."
+"automatisches »nein« auf alle Anfragen. Konfigurationselement: <literal>APT::"
+"Get::Assume-No</literal>."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
 #: apt-get.8.xml:358
@@ -4647,49 +4611,39 @@ msgstr "Befehle"
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
 #: apt-key.8.xml:40
 msgid "add &synopsis-param-filename;"
-msgstr ""
+msgstr "&synopsis-param-filename; hinzufügen"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-key.8.xml:44
-#, fuzzy
-#| msgid ""
-#| "Add a new key to the list of trusted keys.  The key is read from "
-#| "<replaceable>filename</replaceable>, or standard input if "
-#| "<replaceable>filename</replaceable> is <literal>-</literal>."
 msgid ""
 "Add a new key to the list of trusted keys.  The key is read from &synopsis-"
 "param-filename;, or standard input if &synopsis-param-filename; is <literal>-"
 "</literal>."
 msgstr ""
 "Einen neuen Schlüssel zur Liste der vertrauenswürdigen Schlüssel hinzufügen. "
-"Der Schlüssel wird aus <replaceable>Dateiname</replaceable> gelesen oder, "
-"wenn <replaceable>Dateiname</replaceable> <literal>-</literal> ist, von der "
-"Standardeingabe."
+"Der Schlüssel wird aus &synopsis-param-filename; gelesen oder, wenn "
+"&synopsis-param-filename; <literal>-</literal> ist, von der Standardeingabe."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
 #: apt-key.8.xml:52
 msgid "del &synopsis-param-keyid;"
-msgstr ""
+msgstr "del &synopsis-param-keyid;"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-key.8.xml:56
 msgid "Remove a key from the list of trusted keys."
 msgstr ""
-"Einen Schlüssel von der Liste der vertrauenswürdigen Schlüssel entfernen."
+"einen Schlüssel von der Liste der vertrauenswürdigen Schlüssel entfernen"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
 #: apt-key.8.xml:63
 msgid "export &synopsis-param-keyid;"
-msgstr ""
+msgstr "export &synopsis-param-keyid;"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-key.8.xml:67
-#, fuzzy
-#| msgid "Output the key <replaceable>keyid</replaceable> to standard output."
 msgid "Output the key &synopsis-param-keyid; to standard output."
-msgstr ""
-"Den Schlüssel <replaceable>Schlüssel-ID</replaceable> auf der "
-"Standardausgabe ausgeben."
+msgstr "den Schlüssel &synopsis-param-keyid; auf der Standardausgabe ausgeben"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
 #: apt-key.8.xml:74
@@ -4699,7 +4653,7 @@ msgstr "exportall"
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-key.8.xml:78
 msgid "Output all trusted keys to standard output."
-msgstr "Alle vertrauenswürdigen Schlüssel auf der Standardausgabe ausgeben."
+msgstr "alle vertrauenswürdigen Schlüssel auf der Standardausgabe ausgeben"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
 #: apt-key.8.xml:85
@@ -4709,7 +4663,7 @@ msgstr "list"
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-key.8.xml:89
 msgid "List trusted keys."
-msgstr "Vertrauenswürdige Schlüssel auflisten."
+msgstr "vertrauenswürdige Schlüssel auflisten"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
 #: apt-key.8.xml:96
@@ -4719,7 +4673,7 @@ msgstr "finger"
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-key.8.xml:100
 msgid "List fingerprints of trusted keys."
-msgstr "Fingerabdrücke vertrauenswürdiger Schlüssel auflisten."
+msgstr "Fingerabdrücke vertrauenswürdiger Schlüssel auflisten"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
 #: apt-key.8.xml:107
@@ -4732,7 +4686,7 @@ msgid ""
 "Pass advanced options to gpg. With adv --recv-key you can download the "
 "public key."
 msgstr ""
-"Erweitere Optionen an gpg weiterleiten. Mit adv --recv-key können Sie den "
+"erweiterte Optionen an gpg weiterleiten. Mit adv --recv-key können Sie den "
 "öffentlichen Schlüssel herunterladen."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
@@ -4744,7 +4698,7 @@ msgid ""
 "distribution, e.g. the <literal>debian-archive-keyring</literal> package in "
 "Debian."
 msgstr ""
-"Aktualisiert den lokalen Schlüsselbund mit dem Archivschlüsselbund und "
+"aktualisiert den lokalen Schlüsselbund mit dem Archivschlüsselbund und "
 "entfernt die Archivschlüssel, die nicht länger gültig sind, aus dem lokalen "
 "Schlüsselbund. Der Archivschlüsselbund wird im Paket <literal>archive-"
 "keyring</literal> Ihrer Distribution mitgeliefert, z.B. dem Paket "
@@ -4757,14 +4711,6 @@ msgstr "net-update"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-key.8.xml:137
-#, fuzzy
-#| msgid ""
-#| "Work similar to the <command>update</command> command above, but get the "
-#| "archive keyring from an URI instead and validate it against a master "
-#| "key.  This requires an installed &wget; and an APT build configured to "
-#| "have a server to fetch from and a master keyring to validate.  APT in "
-#| "Debian does not support this command and relies on <command>update</"
-#| "command> instead, but Ubuntu's APT does."
 msgid ""
 "Work similar to the <command>update</command> command above, but get the "
 "archive keyring from an URI instead and validate it against a master key.  "
@@ -4793,18 +4739,10 @@ msgstr ""
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
 #: apt-key.8.xml:156
 msgid "--keyring &synopsis-param-filename;"
-msgstr ""
+msgstr "--keyring &synopsis-param-filename;"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-key.8.xml:157
-#, fuzzy
-#| msgid ""
-#| "With this option it is possible to specify a specific keyring file the "
-#| "command should operate on. The default is that a command is executed on "
-#| "the <filename>trusted.gpg</filename> file as well as on all parts in the "
-#| "<filename>trusted.gpg.d</filename> directory, though <filename>trusted."
-#| "gpg</filename> is the primary keyring which means that e.g. new keys are "
-#| "added to this one."
 msgid ""
 "With this option it is possible to specify a specific keyring file the "
 "command should operate on. The default is that a command is executed on the "
@@ -5366,14 +5304,6 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt-secure.8.xml:191
-#, fuzzy
-#| msgid ""
-#| "For more background information you might want to review the <ulink url="
-#| "\"http://www.debian.org/doc/manuals/securing-debian-howto/ch7.en.html"
-#| "\">Debian Security Infrastructure</ulink> chapter of the Securing Debian "
-#| "Manual (available also in the harden-doc package) and the <ulink url="
-#| "\"http://www.cryptnet.net/fdp/crypto/strong_distro.html\" >Strong "
-#| "Distribution HOWTO</ulink> by V. Alex Brennen."
 msgid ""
 "For more background information you might want to review the <ulink url="
 "\"http://www.debian.org/doc/manuals/securing-debian-howto/ch7\">Debian "
@@ -5383,7 +5313,7 @@ msgid ""
 "ulink> by V. Alex Brennen."
 msgstr ""
 "Um weitere Hintergrundinformationen zu erhalten, können Sie die  <ulink url="
-"\"http://www.debian.org/doc/manuals/securing-debian-howto/ch7.de.html\">Die "
+"\"http://www.debian.org/doc/manuals/securing-debian-howto/ch7\">Die "
 "Infrastruktur für Sicherheit in Debian</ulink>-Kapitel des Handbuchs "
 "»Anleitung zum Absichern von Debian« (auch verfügbar im Paket harden-doc) "
 "und dem <ulink url=\"http://www.cryptnet.net/fdp/crypto/strong_distro.html\" "
@@ -5518,15 +5448,6 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
 #: apt.conf.5.xml:52
-#, fuzzy
-#| msgid ""
-#| "all files in <literal>Dir::Etc::Parts</literal> in alphanumeric ascending "
-#| "order which have either no or \"<literal>conf</literal>\" as filename "
-#| "extension and which only contain alphanumeric, hyphen (-), underscore (_) "
-#| "and period (.) characters.  Otherwise APT will print a notice that it has "
-#| "ignored a file if the file doesn't match a pattern in the <literal>Dir::"
-#| "Ignore-Files-Silently</literal> configuration list - in this case it will "
-#| "be silently ignored."
 msgid ""
 "all files in <literal>Dir::Etc::Parts</literal> in alphanumeric ascending "
 "order which have either no or \"<literal>conf</literal>\" as filename "
@@ -6103,15 +6024,6 @@ msgstr "Max-ValidTime"
 
 #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
 #: apt.conf.5.xml:269
-#, fuzzy
-#| msgid ""
-#| "Minimum of seconds the Release file should be considered valid after it "
-#| "was created (indicated by the <literal>Date</literal> header).  Use this "
-#| "if you need to use a seldomly updated (local) mirror of a more regular "
-#| "updated archive with a <literal>Valid-Until</literal> header instead of "
-#| "completely disabling the expiration date checking.  Archive specific "
-#| "settings can and should be used by appending the label of the archive to "
-#| "the option name."
 msgid ""
 "Seconds the Release file should be considered valid after it was created "
 "(indicated by the <literal>Date</literal> header).  If the Release file "
@@ -6120,14 +6032,13 @@ msgid ""
 "literal> which stands for \"for ever\".  Archive specific settings can be "
 "made by appending the label of the archive to the option name."
 msgstr ""
-"Minimale Anzahl der Sekunden, die die Release-Datei als gültig betrachtet "
-"werden sollte, nachdem sie erzeugt wurde (angezeigt durch die Kopfzeile "
-"<literal>Date</literal>). Benutzen Sie dies, falls Sie einen selten "
-"aktualisierten (lokalen) Spiegel eines regelmäßiger aktualisierten Archivs "
-"mit einer <literal>Valid-Until</literal>-Kopfzeile haben, anstatt die "
-"Überprüfung des Ablaufdatum komplett zu deaktivieren. Archivspezifische "
-"Einstellungen können und sollten durch Anhängen des Archivetiketts an die "
-"Option »name« vorgenommen werden."
+"Sekunden, die die Release-Datei als gültig betrachtet werden sollte, nachdem "
+"sie erzeugt wurde (angezeigt durch die Kopfzeile <literal>Date</literal>). "
+"Falls die Release-Datei selbst eine <literal>Valid-Until</literal>-Kopfzeile "
+"enthält, wird das frühere der beiden Daten als Ablaufdatum verwandt. Vorgabe "
+"ist <literal>0</literal>, was für »für immer« steht. Archivspezifische "
+"Einstellungen können durch Anhängen des Archivetiketts an den Optionsnamen "
+"vorgenommen werden."
 
 #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
 #: apt.conf.5.xml:279
@@ -6150,8 +6061,8 @@ msgstr ""
 "aktualisierten (lokalen) Spiegel eines regelmäßiger aktualisierten Archivs "
 "mit einer <literal>Valid-Until</literal>-Kopfzeile haben, anstatt die "
 "Überprüfung des Ablaufdatum komplett zu deaktivieren. Archivspezifische "
-"Einstellungen können und sollten durch Anhängen des Archivetiketts an die "
-"Option »name« vorgenommen werden."
+"Einstellungen können und sollten durch Anhängen des Archivetiketts an den "
+"Optionsnamen vorgenommen werden."
 
 #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
 #: apt.conf.5.xml:290
@@ -6170,14 +6081,6 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
 #: apt.conf.5.xml:294
-#, fuzzy
-#| msgid ""
-#| "Two sub-options to limit the use of PDiffs are also available: With "
-#| "<literal>FileLimit</literal> can be specified how many PDiff files are "
-#| "downloaded at most to patch a file. <literal>SizeLimit</literal> on the "
-#| "other hand is the maximum percentage of the size of all patches compared "
-#| "to the size of the targeted file. If one of these limits is exceeded the "
-#| "complete file is downloaded instead of the patches."
 msgid ""
 "Two sub-options to limit the use of PDiffs are also available: With "
 "<literal>FileLimit</literal> can be specified how many PDiff files are "
@@ -6629,18 +6532,6 @@ msgstr "Dir::Bin::bzip2 \"/bin/bzip2\";"
 
 #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
 #: apt.conf.5.xml:459
-#, fuzzy
-#| msgid ""
-#| "Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</"
-#| "replaceable></literal> will be checked: If this setting exists the method "
-#| "will only be used if this file exists, e.g. for the bzip2 method (the "
-#| "inbuilt) setting is: <placeholder type=\"literallayout\" id=\"0\"/> Note "
-#| "also that list entries specified on the command line will be added at the "
-#| "end of the list specified in the configuration files, but before the "
-#| "default entries. To prefer a type in this case over the ones specified in "
-#| "the configuration files you can set the option direct - not in list "
-#| "style.  This will not override the defined list, it will only prefix the "
-#| "list with this type."
 msgid ""
 "Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</"
 "replaceable></literal> will be checked: If this setting exists the method "
@@ -6667,12 +6558,6 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
 #: apt.conf.5.xml:466
-#, fuzzy
-#| msgid ""
-#| "The special type <literal>uncompressed</literal> can be used to give "
-#| "uncompressed files a preference, but note that most archives don't "
-#| "provide uncompressed files so this is mostly only useable for local "
-#| "mirrors."
 msgid ""
 "The special type <literal>uncompressed</literal> can be used to give "
 "uncompressed files a preference, but note that most archives don't provide "
@@ -7960,16 +7845,6 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt_preferences.5.xml:70
-#, fuzzy
-#| msgid ""
-#| "Note that the files in the <filename>/etc/apt/preferences.d</filename> "
-#| "directory are parsed in alphanumeric ascending order and need to obey the "
-#| "following naming convention: The files have either no or \"<literal>pref</"
-#| "literal>\" as filename extension and only contain alphanumeric, hyphen "
-#| "(-), underscore (_) and period (.) characters.  Otherwise APT will print "
-#| "a notice that it has ignored a file if the file doesn't match a pattern "
-#| "in the <literal>Dir::Ignore-Files-Silently</literal> configuration list - "
-#| "in this case it will be silently ignored."
 msgid ""
 "Note that the files in the <filename>/etc/apt/preferences.d</filename> "
 "directory are parsed in alphanumeric ascending order and need to obey the "
@@ -8431,13 +8306,6 @@ msgstr "Reguläre Ausdrücke und glob()-Syntax"
 
 #. type: Content of: <refentry><refsect1><refsect2><para>
 #: apt_preferences.5.xml:264
-#, fuzzy
-#| msgid ""
-#| "APT also supports pinning by glob() expressions and regular expressions "
-#| "surrounded by /. For example, the following example assigns the priority "
-#| "500 to all packages from experimental where the name starts with gnome "
-#| "(as a glob()-like expression) or contains the word kde (as a POSIX "
-#| "extended regular expression surrounded by slashes)."
 msgid ""
 "APT also supports pinning by glob() expressions and regular expressions "
 "surrounded by /. For example, the following example assigns the priority 500 "
@@ -8466,11 +8334,6 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><refsect2><para>
 #: apt_preferences.5.xml:279
-#, fuzzy
-#| msgid ""
-#| "The rule for those expressions is that they can occur anywhere where a "
-#| "string can occur. Thus, the following pin assigns the priority 990 to all "
-#| "packages from a release starting with karmic."
 msgid ""
 "The rule for those expressions is that they can occur anywhere where a "
 "string can occur. Thus, the following pin assigns the priority 990 to all "
@@ -9387,8 +9250,7 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><literallayout>
 #: sources.list.5.xml:81
-#, fuzzy, no-wrap
-#| msgid "deb [ options ] uri distribution [component1] [component2] [...]"
+#, no-wrap
 msgid "deb [ options ] uri distribution [component1] [component2] [...]"
 msgstr "deb [ Optionen ] URI Distribution [Komponente1] [Komponente2] […]"
 
@@ -9502,6 +9364,13 @@ msgid ""
 "and trusted context. <literal>trusted=no</literal> is the opposite which "
 "handles even correctly authenificated sources as not authenificated."
 msgstr ""
+"<literal>trusted=yes</literal> kann gesetzt werden, um anzuzeigen, dass "
+"Pakete aus dieser Quelle immer authentifiziert sind, sogar, falls die Datei "
+"<filename>Release</filename> nicht signiert ist oder die Signatur nicht "
+"geprüft werden kann. Dies deaktiviert Teile von &apt-secure; und sollte "
+"daher nur in lokalem und vertrauenswürdigem Kontext benutzt werden. "
+"<literal>trusted=no</literal> ist das Gegenteil davon. Es handhabt sogar "
+"korrekt authentifizierte Quellen als nicht authentifiziert."
 
 #. type: Content of: <refentry><refsect1><para>
 #: sources.list.5.xml:128
@@ -11375,295 +11244,3 @@ msgstr "  # apt-get -o dir::cache::archives=\"/Platte/\" dist-upgrade"
 #: offline.sgml:234
 msgid "Which will use the already fetched archives on the disc."
 msgstr "Es wird die bereits auf die Platte heruntergeladenen Archive benutzen."
-
-#~ msgid ""
-#~ "<command>apt-cache</command> <arg><option>-hvsn</option></arg> "
-#~ "<arg><option>-o=<replaceable>config string</replaceable></option></arg> "
-#~ "<arg><option>-c=<replaceable>file</replaceable></option></arg> <group "
-#~ "choice=\"req\"> <arg>gencaches</arg> <arg>showpkg <arg choice=\"plain\" "
-#~ "rep=\"repeat\"><replaceable>pkg</replaceable></arg></arg> <arg>showsrc "
-#~ "<arg choice=\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable></"
-#~ "arg></arg> <arg>stats</arg> <arg>dump</arg> <arg>dumpavail</arg> "
-#~ "<arg>unmet</arg> <arg>search <arg choice=\"plain\"><replaceable>regex</"
-#~ "replaceable></arg></arg> <arg>show <arg choice=\"plain\" rep=\"repeat"
-#~ "\"><replaceable>pkg</replaceable></arg></arg> <arg>depends <arg choice="
-#~ "\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable></arg></arg> "
-#~ "<arg>rdepends <arg choice=\"plain\" rep=\"repeat\"><replaceable>pkg</"
-#~ "replaceable></arg></arg> <arg>pkgnames <arg choice=\"plain"
-#~ "\"><replaceable>prefix</replaceable></arg></arg> <arg>dotty <arg choice="
-#~ "\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable></arg></arg> "
-#~ "<arg>xvcg <arg choice=\"plain\" rep=\"repeat\"><replaceable>pkg</"
-#~ "replaceable></arg></arg> <arg>policy <arg choice=\"plain\" rep=\"repeat"
-#~ "\"><replaceable>pkgs</replaceable></arg></arg> <arg>madison <arg choice="
-#~ "\"plain\" rep=\"repeat\"><replaceable>pkgs</replaceable></arg></arg> </"
-#~ "group>"
-#~ msgstr ""
-#~ "<command>apt-cache</command> <arg><option>-hvsn</option></arg> "
-#~ "<arg><option>-o=<replaceable>Konfigurationszeichenkette</replaceable></"
-#~ "option></arg> <arg><option>-c=<replaceable>Datei</replaceable></option></"
-#~ "arg> <group choice=\"req\"> <arg>gencaches</arg> <arg>showpkg <arg choice="
-#~ "\"plain\" rep=\"repeat\"><replaceable>Paket</replaceable></arg></arg> "
-#~ "<arg>showsrc <arg choice=\"plain\" rep=\"repeat\"><replaceable>Paket</"
-#~ "replaceable></arg></arg> <arg>stats</arg> <arg>dump</arg> <arg>dumpavail</"
-#~ "arg> <arg>unmet</arg> <arg>search <arg choice=\"plain"
-#~ "\"><replaceable>regulärer_Ausdruck</replaceable></arg></arg> <arg>show "
-#~ "<arg choice=\"plain\" rep=\"repeat\"><replaceable>Paket</replaceable></"
-#~ "arg></arg> <arg>depends <arg choice=\"plain\" rep=\"repeat"
-#~ "\"><replaceable>Paket</replaceable></arg></arg> <arg>rdepends <arg choice="
-#~ "\"plain\" rep=\"repeat\"><replaceable>Paket</replaceable></arg></arg> "
-#~ "<arg>pkgnames <arg choice=\"plain\"><replaceable>Präfix</replaceable></"
-#~ "arg></arg> <arg>dotty <arg choice=\"plain\" rep=\"repeat"
-#~ "\"><replaceable>Paket</replaceable></arg></arg> <arg>xvcg <arg choice="
-#~ "\"plain\" rep=\"repeat\"><replaceable>Paket</replaceable></arg></arg> "
-#~ "<arg>policy <arg choice=\"plain\" rep=\"repeat\"><replaceable>Pakete</"
-#~ "replaceable></arg></arg> <arg>madison <arg choice=\"plain\" rep=\"repeat"
-#~ "\"><replaceable>Pakete</replaceable></arg></arg> </group>"
-
-#~ msgid ""
-#~ "<command>apt-cdrom</command> <arg><option>-hvrmfan</option></arg> "
-#~ "<arg><option>-d=<replaceable>cdrom mount point</replaceable></option></"
-#~ "arg> <arg><option>-o=<replaceable>config string</replaceable></option></"
-#~ "arg> <arg><option>-c=<replaceable>file</replaceable></option></arg> "
-#~ "<group> <arg>add</arg> <arg>ident</arg> </group>"
-#~ msgstr ""
-#~ "<command>apt-cdrom</command> <arg><option>-hvrmfan</option></arg> "
-#~ "<arg><option>-d=<replaceable>CD-ROM-Einhängepunkt</replaceable></option></"
-#~ "arg><arg><option>-o=<replaceable>Konfigurationszeichenkette</"
-#~ "replaceable></option></arg><arg><option>-c=<replaceable>Datei</"
-#~ "replaceable></option></arg><group><arg>hinzufügen</"
-#~ "arg><arg>Identifikation</arg></group>"
-
-#~ msgid ""
-#~ "<command>apt-config</command> <arg><option>-hv</option></arg> "
-#~ "<arg><option>-o=<replaceable>config string</replaceable></option></arg> "
-#~ "<arg><option>-c=<replaceable>file</replaceable></option></arg> <group "
-#~ "choice=\"req\"> <arg>shell</arg> <arg>dump</arg> </group>"
-#~ msgstr ""
-#~ "<command>apt-config</command><arg><option>-hv</option></arg><arg><option>-"
-#~ "o=<replaceable>Konfigurationszeichenkette</replaceable></option></"
-#~ "arg><arg><option>-c=<replaceable>Datei</replaceable></option></arg><group "
-#~ "choice=\"req\"> <arg>shell</arg> <arg>dump</arg> </group>"
-
-#~ msgid ""
-#~ "<command>apt-extracttemplates</command> <arg><option>-hv</option></arg> "
-#~ "<arg><option>-t=<replaceable>temporary directory</replaceable></option></"
-#~ "arg> <arg choice=\"plain\" rep=\"repeat\"><replaceable>file</"
-#~ "replaceable></arg>"
-#~ msgstr ""
-#~ "<command>apt-extracttemplates</command> <arg><option>-hv</option></arg> "
-#~ "<arg><option>-t=<replaceable>temporäres Verzeichnis</replaceable></"
-#~ "option></arg> <arg choice=\"plain\" rep=\"repeat\"><replaceable>Datei</"
-#~ "replaceable></arg>"
-
-#~ msgid ""
-#~ "<command>apt-ftparchive</command> <arg><option>-hvdsq</option></arg> "
-#~ "<arg><option>--md5</option></arg> <arg><option>--delink</option></arg> "
-#~ "<arg><option>--readonly</option></arg> <arg><option>--contents</option></"
-#~ "arg> <arg><option>--arch <replaceable>architecture</replaceable></"
-#~ "option></arg> <arg><option>-o <replaceable>config</"
-#~ "replaceable>=<replaceable>string</replaceable></option></arg> "
-#~ "<arg><option>-c=<replaceable>file</replaceable></option></arg> <group "
-#~ "choice=\"req\"> <arg>packages<arg choice=\"plain\" rep=\"repeat"
-#~ "\"><replaceable>path</replaceable></arg><arg><replaceable>override</"
-#~ "replaceable><arg><replaceable>pathprefix</replaceable></arg></arg></arg> "
-#~ "<arg>sources<arg choice=\"plain\" rep=\"repeat\"><replaceable>path</"
-#~ "replaceable></arg><arg><replaceable>override</"
-#~ "replaceable><arg><replaceable>pathprefix</replaceable></arg></arg></arg> "
-#~ "<arg>contents <arg choice=\"plain\"><replaceable>path</replaceable></"
-#~ "arg></arg> <arg>release <arg choice=\"plain\"><replaceable>path</"
-#~ "replaceable></arg></arg> <arg>generate <arg choice=\"plain"
-#~ "\"><replaceable>config-file</replaceable></arg> <arg choice=\"plain\" rep="
-#~ "\"repeat\"><replaceable>section</replaceable></arg></arg> <arg>clean <arg "
-#~ "choice=\"plain\"><replaceable>config-file</replaceable></arg></arg> </"
-#~ "group>"
-#~ msgstr ""
-#~ "<command>apt-ftparchive</command> <arg><option>-hvdsq</option></arg> "
-#~ "<arg><option>--md5</option></arg> <arg><option>--delink</option></arg> "
-#~ "<arg><option>--readonly</option></arg> <arg><option>--contents</option></"
-#~ "arg> <arg><option>--arch <replaceable>Architektur</replaceable></option></"
-#~ "arg> <arg><option>-o <replaceable>Konfiguration</"
-#~ "replaceable>=<replaceable>Zeichenkette</replaceable></option></arg> "
-#~ "<arg><option>-c=<replaceable>Datei</replaceable></option></arg> <group "
-#~ "choice=\"req\"> <arg>packages<arg choice=\"plain\" rep=\"repeat"
-#~ "\"><replaceable>Pfad</replaceable></arg><arg><replaceable>überschreiben</"
-#~ "replaceable><arg><replaceable>Pfad-Präfix</replaceable></arg></arg></arg> "
-#~ "<arg>sources<arg choice=\"plain\" rep=\"repeat\"><replaceable>Pfad</"
-#~ "replaceable></arg><arg><replaceable>überschreiben</"
-#~ "replaceable><arg><replaceable>Pfad-Präfix</replaceable></arg></arg></arg> "
-#~ "<arg>contents <arg choice=\"plain\"><replaceable>Pfad</replaceable></"
-#~ "arg></arg> <arg>release <arg choice=\"plain\"><replaceable>Pfad</"
-#~ "replaceable></arg></arg> <arg>generate <arg choice=\"plain"
-#~ "\"><replaceable>Konfigurationsdatei</replaceable></arg> <arg choice="
-#~ "\"plain\" rep=\"repeat\"><replaceable>Abschnitt</replaceable></arg></arg> "
-#~ "<arg>clean <arg choice=\"plain\"><replaceable>Konfigurationsdatei</"
-#~ "replaceable></arg></arg> </group>"
-
-#, fuzzy
-#~| msgid ""
-#~| "<command>apt-get</command> <arg><option>-sqdyfmubV</option></arg> <arg> "
-#~| "<option>-o= <replaceable>config_string</replaceable> </option> </arg> "
-#~| "<arg> <option>-c= <replaceable>config_file</replaceable> </option> </"
-#~| "arg> <arg> <option>-t=</option> <arg choice='plain'> "
-#~| "<replaceable>target_release</replaceable> </arg> </arg> <arg> <option>-"
-#~| "a=</option> <arg choice='plain'> <replaceable>default_architecture</"
-#~| "replaceable> </arg> </arg> <group choice=\"req\"> <arg "
-#~| "choice='plain'>update</arg> <arg choice='plain'>upgrade</arg> <arg "
-#~| "choice='plain'>dselect-upgrade</arg> <arg choice='plain'>dist-upgrade</"
-#~| "arg> <arg choice='plain'>install <arg choice=\"plain\" rep=\"repeat"
-#~| "\"><replaceable>pkg</replaceable> <arg> <group choice='req'> <arg "
-#~| "choice='plain'> =<replaceable>pkg_version_number</replaceable> </arg> "
-#~| "<arg choice='plain'> /<replaceable>target_release</replaceable> </arg> </"
-#~| "group> </arg> </arg> </arg> <arg choice='plain'>remove <arg choice="
-#~| "\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable></arg></arg> <arg "
-#~| "choice='plain'>purge <arg choice=\"plain\" rep=\"repeat"
-#~| "\"><replaceable>pkg</replaceable></arg></arg> <arg choice='plain'>source "
-#~| "<arg choice=\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable> "
-#~| "<arg> <group choice='req'> <arg choice='plain'> "
-#~| "=<replaceable>pkg_version_number</replaceable> </arg> <arg "
-#~| "choice='plain'> /<replaceable>target_release</replaceable> </arg> </"
-#~| "group> </arg> </arg> </arg> <arg choice='plain'>build-dep <arg choice="
-#~| "\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable></arg></arg> <arg "
-#~| "choice='plain'>check</arg> <arg choice='plain'>clean</arg> <arg "
-#~| "choice='plain'>autoclean</arg> <arg choice='plain'>autoremove</arg> <arg "
-#~| "choice='plain'> <group choice='req'> <arg choice='plain'>-v</arg> <arg "
-#~| "choice='plain'>--version</arg> </group> </arg> <arg choice='plain'> "
-#~| "<group choice='req'> <arg choice='plain'>-h</arg> <arg choice='plain'>--"
-#~| "help</arg> </group> </arg> </group>"
-#~ msgid ""
-#~ "<command>apt-get</command> <arg><option>-sqdyfmubV</option></arg> <arg> "
-#~ "<option>-o= <replaceable>config_string</replaceable> </option> </arg> "
-#~ "<arg> <option>-c= <replaceable>config_file</replaceable> </option> </arg> "
-#~ "<arg> <option>-t=</option> <arg choice='plain'> "
-#~ "<replaceable>target_release</replaceable> </arg> </arg> <group choice="
-#~ "\"req\"> <arg choice='plain'>update</arg> <arg choice='plain'>upgrade</"
-#~ "arg> <arg choice='plain'>dselect-upgrade</arg> <arg choice='plain'>dist-"
-#~ "upgrade</arg> <arg choice='plain'>install <arg choice=\"plain\" rep="
-#~ "\"repeat\"><replaceable>pkg</replaceable> <arg> <group choice='req'> <arg "
-#~ "choice='plain'> =<replaceable>pkg_version_number</replaceable> </arg> "
-#~ "<arg choice='plain'> /<replaceable>target_release</replaceable> </arg> </"
-#~ "group> </arg> </arg> </arg> <arg choice='plain'>remove <arg choice=\"plain"
-#~ "\" rep=\"repeat\"><replaceable>pkg</replaceable></arg></arg> <arg "
-#~ "choice='plain'>purge <arg choice=\"plain\" rep=\"repeat"
-#~ "\"><replaceable>pkg</replaceable></arg></arg> <arg choice='plain'>source "
-#~ "<arg choice=\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable> <arg> "
-#~ "<group choice='req'> <arg choice='plain'> "
-#~ "=<replaceable>pkg_version_number</replaceable> </arg> <arg "
-#~ "choice='plain'> /<replaceable>target_release</replaceable> </arg> </"
-#~ "group> </arg> </arg> </arg> <arg choice='plain'>build-dep <arg choice="
-#~ "\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable></arg></arg> <arg "
-#~ "choice='plain'>check</arg> <arg choice='plain'>clean</arg> <arg "
-#~ "choice='plain'>autoclean</arg> <arg choice='plain'>autoremove</arg> <arg "
-#~ "choice='plain'> <group choice='req'> <arg choice='plain'>-v</arg> <arg "
-#~ "choice='plain'>--version</arg> </group> </arg> <arg choice='plain'> "
-#~ "<group choice='req'> <arg choice='plain'>-h</arg> <arg choice='plain'>--"
-#~ "help</arg> </group> </arg> </group>"
-#~ msgstr ""
-#~ "<command>apt-get</command> <arg><option>-sqdyfmubV</option></arg> <arg> "
-#~ "<option>-o= <replaceable>Konfigurationszeichenkette</replaceable> </"
-#~ "option> </arg> <arg> <option>-c= <replaceable>Konfigurationsdatei</"
-#~ "replaceable> </option> </arg> <arg> <option>-t=</option> <arg "
-#~ "choice='plain'> <replaceable>Ziel-Release</replaceable> </arg> </arg> "
-#~ "<arg> <option>-a=</option> <arg choice='plain'> "
-#~ "<replaceable>Vorgabearchitektur</replaceable> </arg> </arg> <group choice="
-#~ "\"req\"> <arg choice='plain'>update</arg> <arg choice='plain'>upgrade</"
-#~ "arg> <arg choice='plain'>dselect-upgrade</arg> <arg choice='plain'>dist-"
-#~ "upgrade</arg> <arg choice='plain'>install <arg choice=\"plain\" rep="
-#~ "\"repeat\"><replaceable>Paket</replaceable> <arg> <group choice='req'> "
-#~ "<arg choice='plain'> =<replaceable>Paket-Versionsnummer</replaceable> </"
-#~ "arg> <arg choice='plain'> /<replaceable>Ziel-Release</replaceable> </arg> "
-#~ "</group> </arg> </arg> </arg> <arg choice='plain'>remove <arg choice="
-#~ "\"plain\" rep=\"repeat\"><replaceable>Paket</replaceable></arg></arg> "
-#~ "<arg choice='plain'>purge <arg choice=\"plain\" rep=\"repeat"
-#~ "\"><replaceable>Paket</replaceable></arg></arg> <arg "
-#~ "choice='plain'>source <arg choice=\"plain\" rep=\"repeat"
-#~ "\"><replaceable>Paket</replaceable> <arg> <group choice='req'> <arg "
-#~ "choice='plain'> =<replaceable>Paket-Versionsnummer</replaceable> </arg> "
-#~ "<arg choice='plain'> /<replaceable>Ziel-Release</replaceable> </arg> </"
-#~ "group> </arg> </arg> </arg> <arg choice='plain'>build-dep <arg choice="
-#~ "\"plain\" rep=\"repeat\"><replaceable>Paket</replaceable></arg></arg> "
-#~ "<arg choice='plain'>check</arg> <arg choice='plain'>clean</arg> <arg "
-#~ "choice='plain'>autoclean</arg> <arg choice='plain'>autoremove</arg> <arg "
-#~ "choice='plain'> <group choice='req'> <arg choice='plain'>-v</arg> <arg "
-#~ "choice='plain'>--version</arg> </group> </arg> <arg choice='plain'> "
-#~ "<group choice='req'> <arg choice='plain'>-h</arg> <arg choice='plain'>--"
-#~ "help</arg> </group> </arg> </group>"
-
-#~ msgid ""
-#~ "<command>apt-key</command> <arg><option>--keyring <replaceable>filename</"
-#~ "replaceable></option></arg> <arg><replaceable>command</replaceable></arg> "
-#~ "<arg rep=\"repeat\"><option><replaceable>arguments</replaceable></"
-#~ "option></arg>"
-#~ msgstr ""
-#~ "<command>apt-key</command> <arg><option>--keyring <replaceable>Dateiname</"
-#~ "replaceable></option></arg> <arg><replaceable>Befehl</replaceable></arg> "
-#~ "<arg rep=\"repeat\"><option><replaceable>Argumente</replaceable></"
-#~ "option></arg>"
-
-#~ msgid "add <replaceable>filename</replaceable>"
-#~ msgstr "add <replaceable>Dateiname</replaceable>"
-
-#~ msgid "del <replaceable>keyid</replaceable>"
-#~ msgstr "del <replaceable>Schlüssel-ID</replaceable>"
-
-#~ msgid "export <replaceable>keyid</replaceable>"
-#~ msgstr "export <replaceable>Schlüssel-ID</replaceable>"
-
-#~ msgid "--keyring <replaceable>filename</replaceable>"
-#~ msgstr "--keyring <replaceable>Dateiname</replaceable>"
-
-#~ msgid ""
-#~ "  <command>apt-mark</command> <arg><option>-hv</option></arg> "
-#~ "<arg><option>-f=<replaceable>FILENAME</replaceable></option></arg> <group "
-#~ "choice=\"plain\"> <arg choice=\"plain\"> <group choice=\"req\"> <arg "
-#~ "choice=\"plain\">auto</arg> <arg choice=\"plain\">manual</arg> <arg "
-#~ "choice=\"plain\">showauto</arg> <arg choice=\"plain\">showmanual</arg> </"
-#~ "group> <arg choice=\"plain\" rep=\"repeat\"><replaceable>package</"
-#~ "replaceable></arg> </arg> </group>"
-#~ msgstr ""
-#~ "  <command>apt-mark</command> <arg><option>-hv</option></arg> "
-#~ "<arg><option>-f=<replaceable>DATEINAME</replaceable></option></arg> "
-#~ "<group choice=\"plain\"> <arg choice=\"plain\"> <group choice=\"req\"> "
-#~ "<arg choice=\"plain\">auto</arg> <arg choice=\"plain\">manual</arg> <arg "
-#~ "choice=\"plain\">showauto</arg> <arg choice=\"plain\">showmanual</arg> </"
-#~ "group> <arg choice=\"plain\" rep=\"repeat\"><replaceable>Paket</"
-#~ "replaceable></arg> </arg> </group>"
-
-#~ msgid ""
-#~ "<command>apt-sortpkgs</command> <arg><option>-hvs</option></arg> "
-#~ "<arg><option>-o=<replaceable>config string</replaceable></option></arg> "
-#~ "<arg><option>-c=<replaceable>file</replaceable></option></arg> <arg "
-#~ "choice=\"plain\" rep=\"repeat\"><replaceable>file</replaceable></arg>"
-#~ msgstr ""
-#~ "<command>apt-sortpkgs</command> <arg><option>-hvs</option></arg> "
-#~ "<arg><option>-o=<replaceable>Konfigurationszeichenkette</replaceable></"
-#~ "option></arg> <arg><option>-c=<replaceable>Datei</replaceable></option></"
-#~ "arg> <arg choice=\"plain\" rep=\"repeat\"><replaceable>Datei</"
-#~ "replaceable></arg>"
-
-#, fuzzy
-#~| msgid ""
-#~| "Seconds the Release file should be considered valid after it was created "
-#~| "(indicated by the <literal>Date</literal> header).  If the Release file "
-#~| "itself includes a <literal>Valid-Until</literal> header the earlier date "
-#~| "of the two is used as the expiration date.  The default value is "
-#~| "<literal>0</literal> which stands for \"for ever\".  Archive specific "
-#~| "settings can be made by appending the label of the archive to the option "
-#~| "name."
-#~ msgid ""
-#~ "Seconds the Release file should be considered valid after it was created. "
-#~ "The default is \"for ever\" (0) if the Release file of the archive "
-#~ "doesn't include a <literal>Valid-Until</literal> header.  If it does then "
-#~ "this date is the default. The date from the Release file or the date "
-#~ "specified by the creation time of the Release file (<literal>Date</"
-#~ "literal> header) plus the seconds specified with this options are used to "
-#~ "check if the validation of a file has expired by using the earlier date "
-#~ "of the two. Archive specific settings can be made by appending the label "
-#~ "of the archive to the option name."
-#~ msgstr ""
-#~ "Sekunden, die die Release-Datei als gültig betrachtet werden sollte, "
-#~ "nachdem sie erzeugt wurde (angezeigt durch die Kopfzeile <literal>Date</"
-#~ "literal>). Falls die Release-Datei selbst eine <literal>Valid-Until</"
-#~ "literal>-Kopfzeile enhält, wird der frühere von beiden Terminen als "
-#~ "Verfallsdatum benutzt. Vorgabewert ist <literal>0</literal>, was »für "
-#~ "immer« bedeutet. Archivspezifische Einstellungen können durch Anhängen "
-#~ "des Archivetiketts an die Option »name« vorgenommen werden."