merge with my debian-sid branch

7 files changed, 229 insertions, 14 deletions

diff --git a/doc/apt-get.8.xml b/doc/apt-get.8.xml
index 36a675bb0..03a418e5c 100644
--- a/doc/apt-get.8.xml
+++ b/doc/apt-get.8.xml
@@ -317,7 +317,7 @@
 
      <varlistentry><term>autoremove</term>
      <listitem><para><literal>autoremove</literal> is used to remove packages that were automatically
-     installed to satisfy dependencies for some package and that are no more needed.</para></listitem>
+     installed to satisfy dependencies for other packages and are now no longer needed.</para></listitem>
      </varlistentry>
 
      <varlistentry><term>changelog</term>
diff --git a/doc/apt.conf.5.xml b/doc/apt.conf.5.xml
index 1adc868e0..d7d56f3a1 100644
--- a/doc/apt.conf.5.xml
+++ b/doc/apt.conf.5.xml
@@ -294,7 +294,7 @@ DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt";};
 	 <para>Two sub-options to limit the use of PDiffs are also available:
 	 With <literal>FileLimit</literal> can be specified how many PDiff files
 	 are downloaded at most to patch a file. <literal>SizeLimit</literal>
-	 on the other hand is the maximum precentage of the size of all patches
+	 on the other hand is the maximum percentage of the size of all patches
 	 compared to the size of the targeted file. If one of these limits is
 	 exceeded the complete file is downloaded instead of the patches.
 	 </para></listitem>
diff --git a/doc/po/de.po b/doc/po/de.po
index 6261a470e..1c3ab0e90 100644
--- a/doc/po/de.po
+++ b/doc/po/de.po
@@ -1394,9 +1394,15 @@ msgstr "<option>--no-replaces</option>"
 msgid "<option>--no-enhances</option>"
 msgstr "<option>--no-enhances</option>"
 
-# FIXME s/twicked/tricked/
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-cache.8.xml:317
+#, fuzzy
+#| msgid ""
+#| "Per default the <literal>depends</literal> and <literal>rdepends</"
+#| "literal> print all dependencies. This can be twicked with these flags "
+#| "which will omit the specified dependency type.  Configuration Item: "
+#| "<literal>APT::Cache::Show<replaceable>DependencyType</replaceable></"
+#| "literal> e.g. <literal>APT::Cache::ShowRecommends</literal>."
 msgid ""
 "Per default the <literal>depends</literal> and <literal>rdepends</literal> "
 "print all dependencies. This can be twicked with these flags which will omit "
@@ -3133,9 +3139,20 @@ msgid ""
 msgstr ""
 "<option>--md5</option>, <option>--sha1</option>, <option>--sha256</option>"
 
-# FIXME <literal>Checksum</literal> im letzten Abschnitt <replaceable>?
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-ftparchive.1.xml:531
+#, fuzzy
+#| msgid ""
+#| "Generate the given checksum. These options default to on, when turned off "
+#| "the generated index files will not have the checksum fields where "
+#| "possible.  Configuration Items: <literal>APT::FTPArchive::"
+#| "<replaceable>Checksum</replaceable></literal> and <literal>APT::"
+#| "FTPArchive::<replaceable>Index</replaceable>::<replaceable>Checksum</"
+#| "replaceable></literal> where <literal><replaceable>Index</replaceable></"
+#| "literal> can be <literal>Packages</literal>, <literal>Sources</literal> "
+#| "or <literal>Release</literal> and <literal><replaceable>Checksum</"
+#| "replaceable></literal> can be <literal>MD5</literal>, <literal>SHA1</"
+#| "literal> or <literal>SHA256</literal>."
 msgid ""
 "Generate the given checksum. These options default to on, when turned off "
 "the generated index files will not have the checksum fields where possible.  "
@@ -3152,9 +3169,10 @@ msgstr ""
 "Möglichkeit keine Prüfsummenfelder erhalten. Konfigurationselemente: "
 "<literal>APT::FTPArchive::<replaceable>Prüfsumme</replaceable></literal> und "
 "<literal>APT::FTPArchive::<replaceable>Index</replaceable>::"
-"<replaceable>Prüfsumme</replaceable></literal>, wobei <literal>Index</"
-"literal> <literal>Packages</literal>, <literal>Sources</literal> oder "
-"<literal>Release</literal> sein kann und <literal>Checksum</literal> "
+"<replaceable>Prüfsumme</replaceable></literal>, wobei "
+"<literal><replaceable>Index</replaceable></literal> <literal>Packages</"
+"literal>, <literal>Sources</literal> oder <literal>Release</literal> sein "
+"kann und <literal><replaceable>Prüfsumme</replaceable></literal> "
 "<literal>MD5</literal>, <literal>SHA1</literal> oder <literal>SHA256</"
 "literal> sein kann."
 
@@ -3379,6 +3397,35 @@ msgstr "APT-Werkzeug für den Umgang mit Paketen -- Befehlszeilenschnittstelle"
 
 #. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis>
 #: apt-get.8.xml:39
+#, fuzzy
+#| msgid ""
+#| "<command>apt-get</command> <arg><option>-sqdyfmubV</option></arg> <arg> "
+#| "<option>-o= <replaceable>config_string</replaceable> </option> </arg> "
+#| "<arg> <option>-c= <replaceable>config_file</replaceable> </option> </arg> "
+#| "<arg> <option>-t=</option> <arg choice='plain'> "
+#| "<replaceable>target_release</replaceable> </arg> </arg> <group choice="
+#| "\"req\"> <arg choice='plain'>update</arg> <arg choice='plain'>upgrade</"
+#| "arg> <arg choice='plain'>dselect-upgrade</arg> <arg choice='plain'>dist-"
+#| "upgrade</arg> <arg choice='plain'>install <arg choice=\"plain\" rep="
+#| "\"repeat\"><replaceable>pkg</replaceable> <arg> <group choice='req'> <arg "
+#| "choice='plain'> =<replaceable>pkg_version_number</replaceable> </arg> "
+#| "<arg choice='plain'> /<replaceable>target_release</replaceable> </arg> </"
+#| "group> </arg> </arg> </arg> <arg choice='plain'>remove <arg choice=\"plain"
+#| "\" rep=\"repeat\"><replaceable>pkg</replaceable></arg></arg> <arg "
+#| "choice='plain'>purge <arg choice=\"plain\" rep=\"repeat"
+#| "\"><replaceable>pkg</replaceable></arg></arg> <arg choice='plain'>source "
+#| "<arg choice=\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable> <arg> "
+#| "<group choice='req'> <arg choice='plain'> "
+#| "=<replaceable>pkg_version_number</replaceable> </arg> <arg "
+#| "choice='plain'> /<replaceable>target_release</replaceable> </arg> </"
+#| "group> </arg> </arg> </arg> <arg choice='plain'>build-dep <arg choice="
+#| "\"plain\" rep=\"repeat\"><replaceable>pkg</replaceable></arg></arg> <arg "
+#| "choice='plain'>check</arg> <arg choice='plain'>clean</arg> <arg "
+#| "choice='plain'>autoclean</arg> <arg choice='plain'>autoremove</arg> <arg "
+#| "choice='plain'> <group choice='req'> <arg choice='plain'>-v</arg> <arg "
+#| "choice='plain'>--version</arg> </group> </arg> <arg choice='plain'> "
+#| "<group choice='req'> <arg choice='plain'>-h</arg> <arg choice='plain'>--"
+#| "help</arg> </group> </arg> </group>"
 msgid ""
 "<command>apt-get</command> <arg><option>-sqdyfmubV</option></arg> <arg> "
 "<option>-o= <replaceable>config_string</replaceable> </option> </arg> <arg> "
@@ -3749,6 +3796,12 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-get.8.xml:255
+#, fuzzy
+#| msgid ""
+#| "If the <option>--compile</option> option is specified then the package "
+#| "will be compiled to a binary .deb using <command>dpkg-buildpackage</"
+#| "command>, if <option>--download-only</option> is specified then the "
+#| "source package will not be unpacked."
 msgid ""
 "If the <option>--compile</option> option is specified then the package will "
 "be compiled to a binary .deb using <command>dpkg-buildpackage</command>, if "
@@ -3794,6 +3847,10 @@ msgstr "build-dep"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-get.8.xml:272
+#, fuzzy
+#| msgid ""
+#| "<literal>build-dep</literal> causes apt-get to install/remove packages in "
+#| "an attempt to satisfy the build dependencies for a source package."
 msgid ""
 "<literal>build-dep</literal> causes apt-get to install/remove packages in an "
 "attempt to satisfy the build dependencies for a source package."
@@ -3821,9 +3878,12 @@ msgstr ""
 msgid "download"
 msgstr "download"
 
-# FIXME s/directoy/directory/
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-get.8.xml:282
+#, fuzzy
+#| msgid ""
+#| "<literal>download</literal> will download the given binary package into "
+#| "the current directory."
 msgid ""
 "<literal>download</literal> will download the given binary package into the "
 "current directoy."
@@ -3882,6 +3942,11 @@ msgstr "autoremove"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-get.8.xml:308
+#, fuzzy
+#| msgid ""
+#| "<literal>autoremove</literal> is used to remove packages that were "
+#| "automatically installed to satisfy dependencies for some package and that "
+#| "are no more needed."
 msgid ""
 "<literal>autoremove</literal> is used to remove packages that were "
 "automatically installed to satisfy dependencies for some package and that "
@@ -5514,9 +5579,17 @@ msgstr ""
 "die Datei, die durch die Umgebungsvariable <envar>APT_CONFIG</envar> "
 "angegeben wird (falls gesetzt)"
 
-# FIXME s/no or/no/
 #. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
 #: apt.conf.5.xml:52
+#, fuzzy
+#| msgid ""
+#| "all files in <literal>Dir::Etc::Parts</literal> in alphanumeric ascending "
+#| "order which have no or \"<literal>conf</literal>\" as filename extension "
+#| "and which only contain alphanumeric, hyphen (-), underscore (_) and "
+#| "period (.) characters.  Otherwise APT will print a notice that it has "
+#| "ignored a file if the file doesn't match a pattern in the <literal>Dir::"
+#| "Ignore-Files-Silently</literal> configuration list - in this case it will "
+#| "be silently ignored."
 msgid ""
 "all files in <literal>Dir::Etc::Parts</literal> in alphanumeric ascending "
 "order which have no or \"<literal>conf</literal>\" as filename extension and "
@@ -6073,6 +6146,17 @@ msgstr "Max-ValidTime"
 
 #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
 #: apt.conf.5.xml:261
+#, fuzzy
+#| msgid ""
+#| "Seconds the Release file should be considered valid after it was created. "
+#| "The default is \"for ever\" (0) if the Release file of the archive "
+#| "doesn't include a <literal>Valid-Until</literal> header.  If it does then "
+#| "this date is the default. The date from the Release file or the date "
+#| "specified by the creation time of the Release file (<literal>Date</"
+#| "literal> header) plus the seconds specified with this options are used to "
+#| "check if the validation of a file has expired by using the earlier date "
+#| "of the two. Archive specific settings can be made by appending the label "
+#| "of the archive to the option name."
 msgid ""
 "Seconds the Release file should be considered valid after it was created. "
 "The default is \"for ever\" (0) if the Release file of the archive doesn't "
@@ -6112,6 +6196,14 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
 #: apt.conf.5.xml:277
+#, fuzzy
+#| msgid ""
+#| "Two sub-options to limit the use of PDiffs are also available: With "
+#| "<literal>FileLimit</literal> can be specified how many PDiff files are "
+#| "downloaded at most to patch a file. <literal>SizeLimit</literal> on the "
+#| "other hand is the maximum percentage of the size of all patches compared "
+#| "to the size of the targeted file. If one of these limits is exceeded the "
+#| "complete file is downloaded instead of the patches."
 msgid ""
 "Two sub-options to limit the use of PDiffs are also available: With "
 "<literal>FileLimit</literal> can be specified how many PDiff files are "
@@ -6561,9 +6653,20 @@ msgstr ""
 msgid "Dir::Bin::bzip2 \"/bin/bzip2\";"
 msgstr "Dir::Bin::bzip2 \"/bin/bzip2\";"
 
-# FIXME s/> Note/>. Note/
 #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
 #: apt.conf.5.xml:442
+#, fuzzy
+#| msgid ""
+#| "Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</"
+#| "replaceable></literal> will be checked: If this setting exists the method "
+#| "will only be used if this file exists, e.g. for the bzip2 method (the "
+#| "inbuilt) setting is <placeholder type=\"literallayout\" id=\"0\"/> Note "
+#| "also that list entries specified on the command line will be added at the "
+#| "end of the list specified in the configuration files, but before the "
+#| "default entries. To prefer a type in this case over the ones specified in "
+#| "the configuration files you can set the option direct - not in list "
+#| "style.  This will not override the defined list, it will only prefix the "
+#| "list with this type."
 msgid ""
 "Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</"
 "replaceable></literal> will be checked: If this setting exists the method "
@@ -6588,9 +6691,14 @@ msgstr ""
 "nicht im Listenstil. Dies wird die definierte Liste nicht überschreiben, es "
 "wird diesen Typ nur vor die Liste setzen."
 
-# FIXME: s/doesn't provide/don't provide/
 #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
 #: apt.conf.5.xml:449
+#, fuzzy
+#| msgid ""
+#| "The special type <literal>uncompressed</literal> can be used to give "
+#| "uncompressed files a preference, but note that most archives don't "
+#| "provide uncompressed files so this is mostly only useable for local "
+#| "mirrors."
 msgid ""
 "The special type <literal>uncompressed</literal> can be used to give "
 "uncompressed files a preference, but note that most archives doesn't provide "
@@ -7878,6 +7986,16 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt_preferences.5.xml:70
+#, fuzzy
+#| msgid ""
+#| "Note that the files in the <filename>/etc/apt/preferences.d</filename> "
+#| "directory are parsed in alphanumeric ascending order and need to obey the "
+#| "following naming convention: The files have no or \"<literal>pref</"
+#| "literal>\" as filename extension and which only contain alphanumeric, "
+#| "hyphen (-), underscore (_) and period (.) characters.  Otherwise APT will "
+#| "print a notice that it has ignored a file if the file doesn't match a "
+#| "pattern in the <literal>Dir::Ignore-Files-Silently</literal> "
+#| "configuration list - in this case it will be silently ignored."
 msgid ""
 "Note that the files in the <filename>/etc/apt/preferences.d</filename> "
 "directory are parsed in alphanumeric ascending order and need to obey the "
@@ -8351,9 +8469,15 @@ msgstr ""
 msgid "Regular expressions and glob() syntax"
 msgstr "Reguläre Ausdrücke und glob()-Syntax"
 
-# FIXME: s/expression or/expression) or/
 #. type: Content of: <refentry><refsect1><refsect2><para>
 #: apt_preferences.5.xml:264
+#, fuzzy
+#| msgid ""
+#| "APT also supports pinning by glob() expressions and regular expressions "
+#| "surrounded by /. For example, the following example assigns the priority "
+#| "500 to all packages from experimental where the name starts with gnome "
+#| "(as a glob()-like expression) or contains the word kde (as a POSIX "
+#| "extended regular expression surrounded by slashes)."
 msgid ""
 "APT also supports pinning by glob() expressions and regular expressions "
 "surrounded by /. For example, the following example assigns the priority 500 "
@@ -8380,9 +8504,13 @@ msgstr ""
 "Pin: release n=experimental\n"
 "Pin-Priority: 500\n"
 
-# FIXME: s/Those/Thus/
 #. type: Content of: <refentry><refsect1><refsect2><para>
 #: apt_preferences.5.xml:279
+#, fuzzy
+#| msgid ""
+#| "The rule for those expressions is that they can occur anywhere where a "
+#| "string can occur. Thus, the following pin assigns the priority 990 to all "
+#| "packages from a release starting with karmic."
 msgid ""
 "The rule for those expressions is that they can occur anywhere where a "
 "string can occur. Those, the following pin assigns the priority 990 to all "
@@ -9299,7 +9427,8 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><literallayout>
 #: sources.list.5.xml:81
-#, no-wrap
+#, fuzzy, no-wrap
+#| msgid "deb uri distribution [component1] [component2] [...]"
 msgid "deb uri distribution [component1] [component2] [...]"
 msgstr "deb URI Distribution [Komponente1] [Komponente2] [...]"
 
@@ -11221,6 +11350,60 @@ msgstr "  # apt-get -o dir::cache::archives=\"/Platte/\" dist-upgrade"
 msgid "Which will use the already fetched archives on the disc."
 msgstr "Es wird die bereits auf die Platte heruntergeladenen Archive benutzen."
 
+#, fuzzy
+#~| msgid "<option>--recurse</option>"
+#~ msgid "<option>--host-architecture</option>"
+#~ msgstr "<option>--recurse</option>"
+
+#, fuzzy
+#~| msgid "Max-ValidTime"
+#~ msgid "Min-ValidTime"
+#~ msgstr "Max-ValidTime"
+
+#, fuzzy
+#~| msgid ""
+#~| "Seconds the Release file should be considered valid after it was "
+#~| "created. The default is \"for ever\" (0) if the Release file of the "
+#~| "archive doesn't include a <literal>Valid-Until</literal> header.  If it "
+#~| "does then this date is the default. The date from the Release file or "
+#~| "the date specified by the creation time of the Release file "
+#~| "(<literal>Date</literal> header) plus the seconds specified with this "
+#~| "options are used to check if the validation of a file has expired by "
+#~| "using the earlier date of the two. Archive specific settings can be made "
+#~| "by appending the label of the archive to the option name."
+#~ msgid ""
+#~ "Minimum of seconds the Release file should be considered valid after it "
+#~ "was created (indicated by the <literal>Date</literal> header).  Use this "
+#~ "if you need to use a seldomly updated (local) mirror of a more regular "
+#~ "updated archive with a <literal>Valid-Until</literal> header instead of "
+#~ "competely disabling the expiration date checking.  Archive specific "
+#~ "settings can and should be used by appending the label of the archive to "
+#~ "the option name."
+#~ msgstr ""
+#~ "Sekunden, die die Release-Datei als gültig betrachtet werden sollte, "
+#~ "nachdem sie erzeugt wurde. Vorgabe ist »für immer« (0), falls die Release-"
+#~ "Datei des Archivs keine <literal>Valid-Until</literal>-Kopfzeile enthält. "
+#~ "Falls dies so ist, ist dieses Datum vorgegeben. Das Datum aus der Release-"
+#~ "Datei oder das Datum, das durch die Erstellungszeit der Release-Datei "
+#~ "angegeben wurde (<literal>Date</literal>-Kopfzeile) plus die mit diesen "
+#~ "Optionen angegebenen Sekunden werden benutzt, um zu prüfen, ob die "
+#~ "Bestätigung einer Datei abgelaufen ist indem das neuere Datum der beiden "
+#~ "benutzt wird. Archivspezifische Einstellungen können durch Anhängen des "
+#~ "Archivetiketts an die Option »name« vorgenommen werden."
+
+#, fuzzy
+#~| msgid ""
+#~| "deb http://ftp.debian.org/debian &stable-codename; main contrib non-free\n"
+#~| "deb http://security.debian.org/ &stable-codename;/updates main contrib non-free\n"
+#~| "   "
+#~ msgid ""
+#~ "deb http://ftp.debian.org/debian &stable-codename; main\n"
+#~ "deb [ arch=amd64,armel ] http://ftp.debian.org/debian &stable-codename; main"
+#~ msgstr ""
+#~ "deb http://ftp.debian.org/debian &stable-codename; main contrib non-free\n"
+#~ "deb http://security.debian.org/ &stable-codename;/updates main contrib non-free\n"
+#~ "   "
+
 #~ msgid "<option>--md5</option>"
 #~ msgstr "<option>--md5</option>"
 
diff --git a/doc/po/es.po b/doc/po/es.po
index 3a21eeecb..db8b9a848 100644
--- a/doc/po/es.po
+++ b/doc/po/es.po
@@ -6158,6 +6158,14 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
 #: apt.conf.5.xml:277
+#, fuzzy
+#| msgid ""
+#| "Two sub-options to limit the use of PDiffs are also available: With "
+#| "<literal>FileLimit</literal> can be specified how many PDiff files are "
+#| "downloaded at most to patch a file. <literal>SizeLimit</literal> on the "
+#| "other hand is the maximum percentage of the size of all patches compared "
+#| "to the size of the targeted file. If one of these limits is exceeded the "
+#| "complete file is downloaded instead of the patches."
 msgid ""
 "Two sub-options to limit the use of PDiffs are also available: With "
 "<literal>FileLimit</literal> can be specified how many PDiff files are "
diff --git a/doc/po/fr.po b/doc/po/fr.po
index e4a5e1694..037c50de5 100644
--- a/doc/po/fr.po
+++ b/doc/po/fr.po
@@ -6091,6 +6091,14 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
 #: apt.conf.5.xml:277
+#, fuzzy
+#| msgid ""
+#| "Two sub-options to limit the use of PDiffs are also available: With "
+#| "<literal>FileLimit</literal> can be specified how many PDiff files are "
+#| "downloaded at most to patch a file. <literal>SizeLimit</literal> on the "
+#| "other hand is the maximum percentage of the size of all patches compared "
+#| "to the size of the targeted file. If one of these limits is exceeded the "
+#| "complete file is downloaded instead of the patches."
 msgid ""
 "Two sub-options to limit the use of PDiffs are also available: With "
 "<literal>FileLimit</literal> can be specified how many PDiff files are "
diff --git a/doc/po/ja.po b/doc/po/ja.po
index 607d7e64d..4b08de7df 100644
--- a/doc/po/ja.po
+++ b/doc/po/ja.po
@@ -6270,6 +6270,14 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
 #: apt.conf.5.xml:277
+#, fuzzy
+#| msgid ""
+#| "Two sub-options to limit the use of PDiffs are also available: With "
+#| "<literal>FileLimit</literal> can be specified how many PDiff files are "
+#| "downloaded at most to patch a file. <literal>SizeLimit</literal> on the "
+#| "other hand is the maximum percentage of the size of all patches compared "
+#| "to the size of the targeted file. If one of these limits is exceeded the "
+#| "complete file is downloaded instead of the patches."
 msgid ""
 "Two sub-options to limit the use of PDiffs are also available: With "
 "<literal>FileLimit</literal> can be specified how many PDiff files are "
diff --git a/doc/po/pt.po b/doc/po/pt.po
index 863f3dd8b..3c82b2df1 100644
--- a/doc/po/pt.po
+++ b/doc/po/pt.po
@@ -6077,6 +6077,14 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
 #: apt.conf.5.xml:277
+#, fuzzy
+#| msgid ""
+#| "Two sub-options to limit the use of PDiffs are also available: With "
+#| "<literal>FileLimit</literal> can be specified how many PDiff files are "
+#| "downloaded at most to patch a file. <literal>SizeLimit</literal> on the "
+#| "other hand is the maximum percentage of the size of all patches compared "
+#| "to the size of the targeted file. If one of these limits is exceeded the "
+#| "complete file is downloaded instead of the patches."
 msgid ""
 "Two sub-options to limit the use of PDiffs are also available: With "
 "<literal>FileLimit</literal> can be specified how many PDiff files are "