diff options
Diffstat (limited to 'doc/po/es.po')
| -rw-r--r-- | doc/po/es.po | 1781 |
1 files changed, 1069 insertions, 712 deletions
diff --git a/doc/po/es.po b/doc/po/es.po index d0b0933f8..0df642f65 100644 --- a/doc/po/es.po +++ b/doc/po/es.po @@ -37,7 +37,7 @@ msgid "" msgstr "" "Project-Id-Version: apt 0.7.25\n" "Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n" -"POT-Creation-Date: 2012-06-06 23:46+0300\n" +"POT-Creation-Date: 2012-06-09 19:12+0300\n" "PO-Revision-Date: 2010-08-25 03:25+0200\n" "Last-Translator: Omar Campagne <ocampagne@gmail.com>\n" "Language-Team: Debian l10n Spanish <debian-l10n-spanish@lists.debian.org>\n" @@ -1629,14 +1629,14 @@ msgstr "" #. type: Content of: <refentry><refsect1><title> #: apt-get.8.xml:518 apt-cache.8.xml:343 apt-key.8.xml:174 apt-mark.8.xml:125 -#: apt.conf.5.xml:1118 apt_preferences.5.xml:698 +#: apt.conf.5.xml:1156 apt_preferences.5.xml:698 msgid "Files" msgstr "Ficheros" #. type: Content of: <refentry><refsect1><title> #: apt-get.8.xml:528 apt-cache.8.xml:350 apt-key.8.xml:195 apt-mark.8.xml:131 #: apt-secure.8.xml:191 apt-cdrom.8.xml:144 apt-config.8.xml:109 -#: apt.conf.5.xml:1124 apt_preferences.5.xml:705 sources.list.5.xml:252 +#: apt.conf.5.xml:1162 apt_preferences.5.xml:705 sources.list.5.xml:252 #: apt-extracttemplates.1.xml:70 apt-sortpkgs.1.xml:63 #: apt-ftparchive.1.xml:607 msgid "See Also" @@ -3236,11 +3236,17 @@ msgstr "Fichero de configuración de APT" #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:42 +#, fuzzy +#| msgid "" +#| "<filename>apt.conf</filename> is the main configuration file for the APT " +#| "suite of tools, but by far not the only place changes to options can be " +#| "made. All tools therefore share the configuration files and also use a " +#| "common command line parser to provide a uniform environment." msgid "" -"<filename>apt.conf</filename> is the main configuration file for the APT " -"suite of tools, but by far not the only place changes to options can be " -"made. All tools therefore share the configuration files and also use a " -"common command line parser to provide a uniform environment." +"<filename>/etc/apt/apt.conf</filename> is the main configuration file shared " +"by all the tools in the APT suite of tools, though it is by no means the " +"only place options can be set. The suite also shares a common command line " +"parser to provide a uniform environment." msgstr "" "<filename>apt.conf</filename> es el fichero de configuración principal del " "conjunto de herramientas APT, pero no es ni mucho menos donde se pueden " @@ -3249,7 +3255,7 @@ msgstr "" "órdenes común para ofrecer un entorno uniforme." #. type: Content of: <refentry><refsect1><orderedlist><para> -#: apt.conf.5.xml:47 +#: apt.conf.5.xml:48 msgid "" "When an APT tool starts up it will read the configuration files in the " "following order:" @@ -3258,7 +3264,7 @@ msgstr "" "en el siguiente orden:" #. type: Content of: <refentry><refsect1><orderedlist><listitem><para> -#: apt.conf.5.xml:49 +#: apt.conf.5.xml:50 msgid "" "the file specified by the <envar>APT_CONFIG</envar> environment variable (if " "any)" @@ -3267,7 +3273,7 @@ msgstr "" "existir)." #. type: Content of: <refentry><refsect1><orderedlist><listitem><para> -#: apt.conf.5.xml:51 +#: apt.conf.5.xml:52 #, fuzzy #| msgid "" #| "all files in <literal>Dir::Etc::Parts</literal> in alphanumeric ascending " @@ -3280,8 +3286,8 @@ msgid "" "extension and which only contain alphanumeric, hyphen (-), underscore (_) " "and period (.) characters. Otherwise APT will print a notice that it has " "ignored a file, unless that file matches a pattern in the <literal>Dir::" -"Ignore-Files-Silently</literal> configuration list - in this case it will be " -"silently ignored." +"Ignore-Files-Silently</literal> configuration list - in which case it will " +"be silently ignored." msgstr "" "Todos los ficheros en <literal>Dir::Etc::Parts</literal> en orden " "alfanumérico ascendente que no tienen extensión o la extensión " @@ -3290,7 +3296,7 @@ msgstr "" "silenciosamente." #. type: Content of: <refentry><refsect1><orderedlist><listitem><para> -#: apt.conf.5.xml:58 +#: apt.conf.5.xml:59 msgid "" "the main configuration file specified by <literal>Dir::Etc::main</literal>" msgstr "" @@ -3298,7 +3304,7 @@ msgstr "" "literal>." #. type: Content of: <refentry><refsect1><orderedlist><listitem><para> -#: apt.conf.5.xml:60 +#: apt.conf.5.xml:61 msgid "" "the command line options are applied to override the configuration " "directives or to load even more configuration files." @@ -3307,16 +3313,16 @@ msgstr "" "configuración o para cargar más ficheros de configuración." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:64 +#: apt.conf.5.xml:65 msgid "Syntax" msgstr "Sintaxis" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:65 +#: apt.conf.5.xml:66 msgid "" "The configuration file is organized in a tree with options organized into " "functional groups. Option specification is given with a double colon " -"notation, for instance <literal>APT::Get::Assume-Yes</literal> is an option " +"notation; for instance <literal>APT::Get::Assume-Yes</literal> is an option " "within the APT tool group, for the Get tool. Options do not inherit from " "their parent groups." msgstr "" @@ -3327,19 +3333,31 @@ msgstr "" "APT. Las opciones no se heredan de sus grupos paternos." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:71 +#: apt.conf.5.xml:72 +#, fuzzy +#| msgid "" +#| "Syntactically the configuration language is modeled after what the ISC " +#| "tools such as bind and dhcp use. Lines starting with <literal>//</" +#| "literal> are treated as comments (ignored), as well as all text between " +#| "<literal>/*</literal> and <literal>*/</literal>, just like C/C++ " +#| "comments. Each line is of the form <literal>APT::Get::Assume-Yes \"true" +#| "\";</literal>. The trailing semicolon and the quotes are required. The " +#| "value must be on one line, and there is no kind of string concatenation. " +#| "It must not include inside quotes. The behavior of the backslash \"\\\" " +#| "and escaped characters inside a value is undefined and it should not be " +#| "used. An option name may include alphanumerical characters and the \"/-:._" +#| "+\" characters. A new scope can be opened with curly braces, like:" msgid "" "Syntactically the configuration language is modeled after what the ISC tools " "such as bind and dhcp use. Lines starting with <literal>//</literal> are " "treated as comments (ignored), as well as all text between <literal>/*</" "literal> and <literal>*/</literal>, just like C/C++ comments. Each line is " -"of the form <literal>APT::Get::Assume-Yes \"true\";</literal>. The trailing " -"semicolon and the quotes are required. The value must be on one line, and " -"there is no kind of string concatenation. It must not include inside " -"quotes. The behavior of the backslash \"\\\" and escaped characters inside " -"a value is undefined and it should not be used. An option name may include " -"alphanumerical characters and the \"/-:._+\" characters. A new scope can be " -"opened with curly braces, like:" +"of the form <literal>APT::Get::Assume-Yes \"true\";</literal>. The " +"quotation marks and trailing semicolon are required. The value must be on " +"one line, and there is no kind of string concatenation. Values must not " +"include backslashes or extra quotation marks. Option names are made up of " +"alphanumeric characters and the characters \"/-:._+\". A new scope can be " +"opened with curly braces, like this:" msgstr "" "Sintácticamente, el modelo del lenguaje de configuración es similar a las " "herramientas de ISC como pueden ser «bind» y «dhcp». Las líneas que " @@ -3374,10 +3392,16 @@ msgstr "" #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:93 +#, fuzzy +#| msgid "" +#| "with newlines placed to make it more readable. Lists can be created by " +#| "opening a scope and including a single string enclosed in quotes followed " +#| "by a semicolon. Multiple entries can be included, each separated by a " +#| "semicolon." msgid "" "with newlines placed to make it more readable. Lists can be created by " "opening a scope and including a single string enclosed in quotes followed by " -"a semicolon. Multiple entries can be included, each separated by a semicolon." +"a semicolon. Multiple entries can be included, separated by a semicolon." msgstr "" "con nuevas líneas ubicadas para hacerlo más legible. Las listas pueden " "crearse abriendo un nuevo ámbito e incluyendo una única cadena acotada entre " @@ -3402,9 +3426,13 @@ msgstr "" #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:105 +#, fuzzy +#| msgid "" +#| "The names of the configuration items are not case-sensitive. So in the " +#| "previous example you could use <literal>dpkg::pre-install-pkgs</literal>." msgid "" -"The names of the configuration items are not case-sensitive. So in the " -"previous example you could use <literal>dpkg::pre-install-pkgs</literal>." +"Case is not significant in names of configuration items, so in the previous " +"example you could use <literal>dpkg::pre-install-pkgs</literal>." msgstr "" "Los nombres de las opciones de configuración no diferencian mayúsculas de " "minúsculas. De modo que en el ejemplo anterior se podría haber usado " @@ -3413,11 +3441,11 @@ msgstr "" #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:108 msgid "" -"Names for the configuration items are optional if a list is defined as it " -"can be see in the <literal>DPkg::Pre-Install-Pkgs</literal> example above. " -"If you don't specify a name a new entry will simply add a new option to the " -"list. If you specify a name you can override the option as every other " -"option by reassigning a new value to the option." +"Names for the configuration items are optional if a list is defined as can " +"be seen in the <literal>DPkg::Pre-Install-Pkgs</literal> example above. If " +"you don't specify a name a new entry will simply add a new option to the " +"list. If you specify a name you can override the option in the same way as " +"any other option by reassigning a new value to the option." msgstr "" "Los nombres de las opciones de configuración son opcionales, si se define " "una lista como se puede ver en el ejemplo anterior de <literal>DPkg::Pre-" @@ -3427,14 +3455,23 @@ msgstr "" #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:113 -msgid "" -"Two specials are allowed, <literal>#include</literal> (which is deprecated " -"and not supported by alternative implementations) and <literal>#clear</" -"literal>: <literal>#include</literal> will include the given file, unless " -"the filename ends in a slash, then the whole directory is included. " -"<literal>#clear</literal> is used to erase a part of the configuration tree. " -"The specified element and all its descendants are erased. (Note that these " -"lines also need to end with a semicolon.)" +#, fuzzy +#| msgid "" +#| "Two specials are allowed, <literal>#include</literal> (which is " +#| "deprecated and not supported by alternative implementations) and " +#| "<literal>#clear</literal>: <literal>#include</literal> will include the " +#| "given file, unless the filename ends in a slash, then the whole directory " +#| "is included. <literal>#clear</literal> is used to erase a part of the " +#| "configuration tree. The specified element and all its descendants are " +#| "erased. (Note that these lines also need to end with a semicolon.)" +msgid "" +"Two special commands are defined: <literal>#include</literal> (which is " +"deprecated and not supported by alternative implementations) and " +"<literal>#clear</literal>. <literal>#include</literal> will include the " +"given file, unless the filename ends in a slash, in which case the whole " +"directory is included. <literal>#clear</literal> is used to erase a part of " +"the configuration tree. The specified element and all its descendants are " +"erased. (Note that these lines also need to end with a semicolon.)" msgstr "" "Se permiten dos valores especiales, <literal>#include</literal> (ya obsoleto " "y no es compatible en implementaciones alternativas) y <literal>#clear</" @@ -3446,13 +3483,20 @@ msgstr "" "necesitan acabar con punto y coma)." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:121 -msgid "" -"The #clear command is the only way to delete a list or a complete scope. " -"Reopening a scope or the ::-style described below will <emphasis>not</" -"emphasis> override previously written entries. Only options can be " -"overridden by addressing a new value to it - lists and scopes can't be " -"overridden, only cleared." +#: apt.conf.5.xml:123 +#, fuzzy +#| msgid "" +#| "The #clear command is the only way to delete a list or a complete scope. " +#| "Reopening a scope or the ::-style described below will <emphasis>not</" +#| "emphasis> override previously written entries. Only options can be " +#| "overridden by addressing a new value to it - lists and scopes can't be " +#| "overridden, only cleared." +msgid "" +"The <literal>#clear</literal> command is the only way to delete a list or a " +"complete scope. Reopening a scope (or using the syntax described below with " +"an appended <literal>::</literal>) will <emphasis>not</emphasis> override " +"previously written entries. Options can only be overridden by addressing a " +"new value to them - lists and scopes can't be overridden, only cleared." msgstr "" "La orden #clear ofrece la única manera de borrar una lista o un ámbito " "completo. Reabrir un ámbito o el estilo de dos puntos dobles («::») descrito " @@ -3461,33 +3505,34 @@ msgstr "" "valor, las listas y los ámbitos no se pueden redefinir, sólo eliminar." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:126 +#: apt.conf.5.xml:131 #, fuzzy #| msgid "" -#| "All of the APT tools take a -o option which allows an arbitrary " +#| "All of the APT tools take an -o option which allows an arbitrary " #| "configuration directive to be specified on the command line. The syntax " #| "is a full option name (<literal>APT::Get::Assume-Yes</literal> for " #| "instance) followed by an equals sign then the new value of the option. " #| "Lists can be appended too by adding a trailing :: to the list name. (As " #| "you might suspect: The scope syntax can't be used on the command line.)" msgid "" -"All of the APT tools take a -o option which allows an arbitrary " +"All of the APT tools take an -o option which allows an arbitrary " "configuration directive to be specified on the command line. The syntax is a " "full option name (<literal>APT::Get::Assume-Yes</literal> for instance) " "followed by an equals sign then the new value of the option. To append a new " -"element to a list, add a trailing :: to the name of the list. (As you might " -"suspect: The scope syntax can't be used on the command line.)" +"element to a list, add a trailing <literal>::</literal> to the name of the " +"list. (As you might suspect, the scope syntax can't be used on the command " +"line.)" msgstr "" "Todas las herramientas de APT permiten la opción -o como una directriz " "arbitraria de configuración que se define en la línea de órdenes. La " "sintaxis es un nombre de opción completo (por ejemplo, <literal>APT::Get::" "Assume-Yes</literal>) seguido por signos de igualdad y el nuevo valor de la " -"opción. También puede añadir listas añadiendo dos puntos dobles («::») al " -"final del nombre de la lista. (Como ya podía imaginar, no puede usar la " -"sintaxis de los ámbitos en la línea de órdenes)." +"opción. También puede añadir listas añadiendo dos puntos dobles («<literal>::" +"</literal>») al final del nombre de la lista. (Como ya podía imaginar, no " +"puede usar la sintaxis de los ámbitos en la línea de órdenes)." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:133 +#: apt.conf.5.xml:139 #, fuzzy #| msgid "" #| "Note that you can use :: only for appending one item per line to a list " @@ -3503,18 +3548,18 @@ msgstr "" #| "encounter this misuse, so please correct such statements now as long as " #| "APT doesn't complain explicit about them." msgid "" -"Note that you can use :: only for appending one item per line to a list and " -"that you should not use it in combination with the scope syntax. (The scope " -"syntax implicit insert ::) Using both syntaxes together will trigger a bug " -"which some users unfortunately depend on: An option with the unusual name " -"\"<literal>::</literal>\" which acts like every other option with a name. " -"These introduces many problems including that a user who writes multiple " -"lines in this <emphasis>wrong</emphasis> syntax in the hope to append to a " -"list will gain the opposite as only the last assignment for this option " -"\"<literal>::</literal>\" will be used. Upcoming APT versions will raise " -"errors and will stop working if they encounter this misuse, so please " -"correct such statements now as long as APT doesn't complain explicit about " -"them." +"Note that appending items to a list using <literal>::</literal> only works " +"for one item per line, and that you should not use it in combination with " +"the scope syntax (which adds <literal>::</literal> implicitly). Using both " +"syntaxes together will trigger a bug which some users unfortunately depend " +"on: an option with the unusual name \"<literal>::</literal>\" which acts " +"like every other option with a name. This introduces many problems; for one " +"thing, users who write multiple lines in this <emphasis>wrong</emphasis> " +"syntax in the hope of appending to a list will achieve the opposite, as only " +"the last assignment for this option \"<literal>::</literal>\" will be used. " +"Future versions of APT will raise errors and stop working if they encounter " +"this misuse, so please correct such statements now while APT doesn't " +"explicitly complain about them." msgstr "" "Tenga en cuenta que puede usar los dos puntos dobles («::») sólo para añadir " "un elemento por línea a una lista, y que no debería usarlo en combinación " @@ -3531,12 +3576,12 @@ msgstr "" "APT no se queja explícitamente de ellos." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:145 +#: apt.conf.5.xml:154 msgid "The APT Group" msgstr "El grupo APT" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:146 +#: apt.conf.5.xml:155 msgid "" "This group of options controls general APT behavior as well as holding the " "options for all of the tools." @@ -3545,7 +3590,7 @@ msgstr "" "mantiene las opciones para todas las herramientas." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:151 +#: apt.conf.5.xml:160 msgid "" "System Architecture; sets the architecture to use when fetching files and " "parsing package lists. The internal default is the architecture apt was " @@ -3556,25 +3601,25 @@ msgstr "" "arquitectura para la que apt se compiló." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:157 +#: apt.conf.5.xml:167 msgid "" -"All Architectures the system supports. Processors implementing the " -"<literal>amd64</literal> (also called <literal>x86-64</literal>) instruction " -"set are e.g. also able to execute binaries compiled for the <literal>i386</" -"literal> (<literal>x86</literal>) instruction set; This list is use when " -"fetching files and parsing package lists. The internal default is always the " -"native architecture (<literal>APT::Architecture</literal>) and all foreign " -"architectures it can retrieve by calling <command>dpkg --print-foreign-" -"architectures</command>." +"All Architectures the system supports. For instance, CPUs implementing the " +"<literal>amd64</literal> (also called <literal>x86-64</literal>) " +"instruction set are also able to execute binaries compiled for the " +"<literal>i386</literal> (<literal>x86</literal>) instruction set. This list " +"is used when fetching files and parsing package lists. The initial default " +"is always the system's native architecture (<literal>APT::Architecture</" +"literal>), and foreign architectures are added to the default list when they " +"are registered via <command>dpkg --add-architecture</command>." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:167 +#: apt.conf.5.xml:180 msgid "" -"Default release to install packages from if more than one version available. " -"Contains release name, codename or release version. Examples: 'stable', " -"'testing', 'unstable', '&stable-codename;', '&testing-codename;', '4.0', " -"'5.0*'. See also &apt-preferences;." +"Default release to install packages from if more than one version is " +"available. Contains release name, codename or release version. Examples: " +"'stable', 'testing', 'unstable', '&stable-codename;', '&testing-codename;', " +"'4.0', '5.0*'. See also &apt-preferences;." msgstr "" "La versión predeterminada de la que se instalarán los paquetes, si hay más " "de una versión disponible. Contiene el nombre de la versión, ya sea el " @@ -3583,16 +3628,16 @@ msgstr "" "«5.0*». Vea también &apt-preferences;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:173 +#: apt.conf.5.xml:186 msgid "" -"Ignore Held packages; This global option causes the problem resolver to " +"Ignore held packages; this global option causes the problem resolver to " "ignore held packages in its decision making." msgstr "" "Ignora paquetes retenidos, esta opción global causa que el solucionador de " "problemas ignore los paquetes retenidos en la toma de decisiones." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:178 +#: apt.conf.5.xml:191 msgid "" "Defaults to on. When turned on the autoclean feature will remove any " "packages which can no longer be downloaded from the cache. If turned off " @@ -3606,78 +3651,67 @@ msgstr "" "mecanismo directo para reinstalarlos." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:185 -msgid "" -"Defaults to on which will cause APT to install essential and important " -"packages as fast as possible in the install/upgrade operation. This is done " -"to limit the effect of a failing &dpkg; call: If this option is disabled APT " -"does treat an important package in the same way as an extra package: Between " -"the unpacking of the important package A and his configuration can then be " -"many other unpack or configuration calls, e.g. for package B which has no " -"relation to A, but causes the dpkg call to fail (e.g. because maintainer " -"script of package B generates an error) which results in a system state in " -"which package A is unpacked but unconfigured - each package depending on A " -"is now no longer guaranteed to work as their dependency on A is not longer " -"satisfied. The immediate configuration marker is also applied to all " -"dependencies which can generate a problem if the dependencies e.g. form a " -"circle as a dependency with the immediate flag is comparable with a Pre-" -"Dependency. So in theory it is possible that APT encounters a situation in " -"which it is unable to perform immediate configuration, errors out and refers " -"to this option so the user can deactivate the immediate configuration " -"temporarily to be able to perform an install/upgrade again. Note the use of " -"the word \"theory\" here as this problem was only encountered by now in real " -"world a few times in non-stable distribution versions and was caused by " -"wrong dependencies of the package in question or by a system in an already " -"broken state, so you should not blindly disable this option as the mentioned " -"scenario above is not the only problem immediate configuration can help to " -"prevent in the first place. Before a big operation like <literal>dist-" -"upgrade</literal> is run with this option disabled it should be tried to " -"explicitly <literal>install</literal> the package APT is unable to configure " -"immediately, but please make sure to report your problem also to your " -"distribution and to the APT team with the buglink below so they can work on " -"improving or correcting the upgrade process." -msgstr "" -"Activo de forma predeterminada, hará que APT instale los paquetes esenciales " -"e importantes tan rápido como le sea posible al instalar y/o actualizar. " -"Esto se hace para limitar el efecto de un fallo en la ejecución de &dpkg;. " -"Si esta opción está desactivada, APT trata los paquetes importantes del " -"mismo modo que un paquete adicional: entre desempaquetar un paquete " -"importante A y su configuración puede haber muchos otros desempaquetados y " -"configuraciones. Por ejemplo, el paquete B que no tiene relación con A, pero " -"que hace que la ejecución de dpkg falle (ya sea porque el script del " -"mantenedor del paquete B genera un error) generará un estado del sistema en " -"el que el paquete A está desempaquetado pero no configurado; no se garantiza " -"el funcionamiento de cada paquete que depende de A ya que su dependencia con " -"A no está satisfecha. El marcador de configuración inmediata se aplicará a " -"todas las dependencias que puedan generar un problema si las dependencias, " -"por ejemplo, forman un círculo vicioso como dependencia con la marca de " -"configuración inmediata, lo cual lo califica casi como Pre-Dependencia. Así, " -"en teoría es posible que APT encuentre una situación en la que es incapaz de " -"llevar a cabo una configuración inmediata, devuelva un error y mencione esta " -"opción para que así el usuario pueda desactivar la configuración inmediata " -"temporalmente para llevar a cabo una vez más la instalación y/o " -"actualización. Observe el uso de la expresión «en teoría», ya que esta " -"situación sólo se ha visto algunas veces con versiones de distribución no " -"estables, y causadas por dependencias incorrectas del paquete en cuestión o " -"en un sistema ya roto. Por ello, no debería desactivar ciegamente esta " -"opción ya que la situación mencionada anteriormente no es el único problema " -"que la configuración inmediata puede resolver. Antes de llevar a cabo una " -"operación grande como <literal>dist-upgrade</literal> con esta opción " -"desactivada debería intentar un <literal>install</literal> con el paquete " -"que APT es incapaz de configurar inmediatamente, pero asegúrese de informar " -"del fallo a su distribución y al equipo de APT mediante el enlace a informes " -"de fallo a continuación para que así puedan mejorar o corregir el proceso de " -"actualización." - -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:208 -msgid "" -"Never Enable this option unless you -really- know what you are doing. It " -"permits APT to temporarily remove an essential package to break a Conflicts/" -"Conflicts or Conflicts/Pre-Depend loop between two essential packages. SUCH " -"A LOOP SHOULD NEVER EXIST AND IS A GRAVE BUG. This option will work if the " -"essential packages are not tar, gzip, libc, dpkg, bash or anything that " -"those packages depend on." +#: apt.conf.5.xml:199 +msgid "" +"Defaults to on, which will cause APT to install essential and important " +"packages as soon as possible in an install/upgrade operation, in order to " +"limit the effect of a failing &dpkg; call. If this option is disabled, APT " +"treats an important package in the same way as an extra package: between the " +"unpacking of the package A and its configuration there can be many other " +"unpack or configuration calls for other unrelated packages B, C etc. If " +"these cause the &dpkg; call to fail (e.g. because package B's maintainer " +"scripts generate an error), this results in a system state in which package " +"A is unpacked but unconfigured - so any package depending on A is now no " +"longer guaranteed to work, as its dependency on A is no longer satisfied." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:211 +msgid "" +"The immediate configuration marker is also applied in the potentially " +"problematic case of circular dependencies, since a dependency with the " +"immediate flag is equivalent to a Pre-Dependency. In theory this allows APT " +"to recognise a situation in which it is unable to perform immediate " +"configuration, abort, and suggest to the user that the option should be " +"temporarily deactivated in order to allow the operation to proceed. Note " +"the use of the word \"theory\" here; in the real world this problem has " +"rarely been encountered, in non-stable distribution versions, and was caused " +"by wrong dependencies of the package in question or by a system in an " +"already broken state; so you should not blindly disable this option, as the " +"scenario mentioned above is not the only problem it can help to prevent in " +"the first place." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:224 +msgid "" +"Before a big operation like <literal>dist-upgrade</literal> is run with this " +"option disabled you should try to explicitly <literal>install</literal> the " +"package APT is unable to configure immediately; but please make sure you " +"also report your problem to your distribution and to the APT team with the " +"buglink below, so they can work on improving or correcting the upgrade " +"process." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:235 +#, fuzzy +#| msgid "" +#| "Never Enable this option unless you -really- know what you are doing. It " +#| "permits APT to temporarily remove an essential package to break a " +#| "Conflicts/Conflicts or Conflicts/Pre-Depend loop between two essential " +#| "packages. SUCH A LOOP SHOULD NEVER EXIST AND IS A GRAVE BUG. This option " +#| "will work if the essential packages are not tar, gzip, libc, dpkg, bash " +#| "or anything that those packages depend on." +msgid "" +"Never enable this option unless you <emphasis>really</emphasis> know what " +"you are doing. It permits APT to temporarily remove an essential package to " +"break a Conflicts/Conflicts or Conflicts/Pre-Depends loop between two " +"essential packages. <emphasis>Such a loop should never exist and is a grave " +"bug</emphasis>. This option will work if the essential packages are not " +"<command>tar</command>, <command>gzip</command>, <command>libc</command>, " +"<command>dpkg</command>, <command>dash</command> or anything that those " +"packages depend on." msgstr "" "Nunca active esta opción a menos que usted (realmente) sepa lo que está " "haciendo. Esto permite a APT eliminar temporalmente un paquete esencial para " @@ -3687,7 +3721,7 @@ msgstr "" "libc, ni dpkg, ni bash, ni cualquier otro del que dependan estos paquetes." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:217 +#: apt.conf.5.xml:247 #, fuzzy #| msgid "" #| "APT uses since version 0.7.26 a resizable memory mapped cache file to " @@ -3708,20 +3742,20 @@ msgstr "" #| "automatic grow of the cache is disabled." msgid "" "APT uses since version 0.7.26 a resizable memory mapped cache file to store " -"the 'available' information. <literal>Cache-Start</literal> acts as a hint " -"to which size the Cache will grow and is therefore the amount of memory APT " +"the available information. <literal>Cache-Start</literal> acts as a hint of " +"the size the cache will grow to, and is therefore the amount of memory APT " "will request at startup. The default value is 20971520 bytes (~20 MB). Note " -"that this amount of space needs to be available for APT otherwise it will " +"that this amount of space needs to be available for APT; otherwise it will " "likely fail ungracefully, so for memory restricted devices this value should " "be lowered while on systems with a lot of configured sources it should be " "increased. <literal>Cache-Grow</literal> defines in bytes with the default " -"of 1048576 (~1 MB) how much the Cache size will be increased in the event " -"the space defined by <literal>Cache-Start</literal> is not enough. These " +"of 1048576 (~1 MB) how much the cache size will be increased in the event " +"the space defined by <literal>Cache-Start</literal> is not enough. This " "value will be applied again and again until either the cache is big enough " "to store all information or the size of the cache reaches the <literal>Cache-" "Limit</literal>. The default of <literal>Cache-Limit</literal> is 0 which " "stands for no limit. If <literal>Cache-Grow</literal> is set to 0 the " -"automatic grow of the cache is disabled." +"automatic growth of the cache is disabled." msgstr "" "A partir de la versión 0.7.26, APT usa un fichero de caché mapeado («mapped " "cache file») redimensionable para almacenar la información disponible. " @@ -3742,62 +3776,80 @@ msgstr "" "crecimiento automático del cache." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:233 -msgid "Defines which package(s) are considered essential build dependencies." +#: apt.conf.5.xml:263 +#, fuzzy +#| msgid "" +#| "Defines which package(s) are considered essential build dependencies." +msgid "Defines which packages are considered essential build dependencies." msgstr "" "Define qué paquete(s) se consideran dependencias de creación esenciales." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:237 +#: apt.conf.5.xml:267 msgid "" -"The Get subsection controls the &apt-get; tool, please see its documentation " +"The Get subsection controls the &apt-get; tool; please see its documentation " "for more information about the options here." msgstr "" "La subsección Get controla la herramienta &apt-get;, por favor, consulte la " "documentación para más información sobre esta opción." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:242 +#: apt.conf.5.xml:272 msgid "" -"The Cache subsection controls the &apt-cache; tool, please see its " +"The Cache subsection controls the &apt-cache; tool; please see its " "documentation for more information about the options here." msgstr "" "La subsección Cache controla la herramienta &apt-cache;, por favor, consulte " "la documentación para más información sobre esta opción." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:247 +#: apt.conf.5.xml:277 msgid "" -"The CDROM subsection controls the &apt-cdrom; tool, please see its " +"The CDROM subsection controls the &apt-cdrom; tool; please see its " "documentation for more information about the options here." msgstr "" "La subsección CDROM controla la herramienta &apt-cdrom;, por favor, consulte " "la documentación para más información sobre esta opción." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:253 +#: apt.conf.5.xml:283 msgid "The Acquire Group" msgstr "El grupo Acquire" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:254 +#: apt.conf.5.xml:284 +#, fuzzy +#| msgid "" +#| "The <literal>Acquire</literal> group of options controls the download of " +#| "packages and the URI handlers." msgid "" "The <literal>Acquire</literal> group of options controls the download of " -"packages and the URI handlers." +"packages as well as the various \"acquire methods\" responsible for the " +"download itself (see also &sources-list;)." msgstr "" "El grupo de opciones <literal>Acquire</literal> controla la descarga de " "paquetes y los gestores de URI." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:259 -msgid "" -"Security related option defaulting to true as an expiring validation for a " -"Release file prevents longtime replay attacks and can e.g. also help users " -"to identify no longer updated mirrors - but the feature depends on the " -"correctness of the time on the user system. Archive maintainers are " -"encouraged to create Release files with the <literal>Valid-Until</literal> " -"header, but if they don't or a stricter value is volitional the following " -"<literal>Max-ValidTime</literal> option can be used." +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:291 +#, fuzzy +#| msgid "" +#| "Security related option defaulting to true as an expiring validation for " +#| "a Release file prevents longtime replay attacks and can e.g. also help " +#| "users to identify no longer updated mirrors - but the feature depends on " +#| "the correctness of the time on the user system. Archive maintainers are " +#| "encouraged to create Release files with the <literal>Valid-Until</" +#| "literal> header, but if they don't or a stricter value is volitional the " +#| "following <literal>Max-ValidTime</literal> option can be used." +msgid "" +"Security related option defaulting to true, as giving a Release file's " +"validation an expiration date prevents replay attacks over a long timescale, " +"and can also for example help users to identify mirrors that are no longer " +"updated - but the feature depends on the correctness of the clock on the " +"user system. Archive maintainers are encouraged to create Release files with " +"the <literal>Valid-Until</literal> header, but if they don't or a stricter " +"value is desired the <literal>Max-ValidTime</literal> option below can be " +"used." msgstr "" "Opción relacionada con la seguridad, cuyo valor predeterminado de «true», ya " "que una validación temporal para un fichero «Release» evita ataques " @@ -3808,8 +3860,8 @@ msgstr "" "se hace, o si un valor más estricto es opcional, se puede usar la opción " "<literal>Max-ValidTime</literal>." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:270 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:304 #, fuzzy #| msgid "" #| "Seconds the Release file should be considered valid after it was created. " @@ -3822,12 +3874,13 @@ msgstr "" #| "of the two. Archive specific settings can be made by appending the label " #| "of the archive to the option name." msgid "" -"Seconds the Release file should be considered valid after it was created " -"(indicated by the <literal>Date</literal> header). If the Release file " -"itself includes a <literal>Valid-Until</literal> header the earlier date of " -"the two is used as the expiration date. The default value is <literal>0</" -"literal> which stands for \"for ever valid\". Archive specific settings can " -"be made by appending the label of the archive to the option name." +"Maximum time (in seconds) after its creation (as indicated by the " +"<literal>Date</literal> header) that the <filename>Release</filename> file " +"should be considered valid. If the Release file itself includes a " +"<literal>Valid-Until</literal> header the earlier date of the two is used as " +"the expiration date. The default value is <literal>0</literal> which stands " +"for \"valid forever\". Archive specific settings can be made by appending " +"the label of the archive to the option name." msgstr "" "Los segundos que el fichero «Release» se considerará válido después de su " "creación. El valor predeterminado es «para siempre» (cero) si el fichero " @@ -3841,8 +3894,8 @@ msgstr "" "específicas al archivo añadiendo la etiqueta del archivo al nombre de la " "opción." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:281 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:316 #, fuzzy #| msgid "" #| "Seconds the Release file should be considered valid after it was created. " @@ -3855,12 +3908,13 @@ msgstr "" #| "of the two. Archive specific settings can be made by appending the label " #| "of the archive to the option name." msgid "" -"Minimum of seconds the Release file should be considered valid after it was " -"created (indicated by the <literal>Date</literal> header). Use this if you " -"need to use a seldomly updated (local) mirror of a more regular updated " -"archive with a <literal>Valid-Until</literal> header instead of completely " -"disabling the expiration date checking. Archive specific settings can and " -"should be used by appending the label of the archive to the option name." +"Minimum time (in seconds) after its creation (as indicated by the " +"<literal>Date</literal> header) that the <filename>Release</filename> file " +"should be considered valid. Use this if you need to use a seldom updated " +"(local) mirror of a more frequently updated archive with a <literal>Valid-" +"Until</literal> header instead of completely disabling the expiration date " +"checking. Archive specific settings can and should be used by appending the " +"label of the archive to the option name." msgstr "" "Los segundos que el fichero «Release» se considerará válido después de su " "creación. El valor predeterminado es «para siempre» (cero) si el fichero " @@ -3874,18 +3928,23 @@ msgstr "" "específicas al archivo añadiendo la etiqueta del archivo al nombre de la " "opción." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:292 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:328 +#, fuzzy +#| msgid "" +#| "Try to download deltas called <literal>PDiffs</literal> for Packages or " +#| "Sources files instead of downloading whole ones. True by default." msgid "" -"Try to download deltas called <literal>PDiffs</literal> for Packages or " -"Sources files instead of downloading whole ones. True by default." +"Try to download deltas called <literal>PDiffs</literal> for indexes (like " +"<filename>Packages</filename> files) instead of downloading whole ones. True " +"by default." msgstr "" "Intenta descargar deltas llamados <literal>PDiffs</literal> de los ficheros " "«Packages» o «Sources» en lugar de descargarlos enteros. Es «true» de forma " "predeterminada" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:295 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:331 #, fuzzy #| msgid "" #| "Two sub-options to limit the use of PDiffs are also available: With " @@ -3895,12 +3954,12 @@ msgstr "" #| "to the size of the targeted file. If one of these limits is exceeded the " #| "complete file is downloaded instead of the patches." msgid "" -"Two sub-options to limit the use of PDiffs are also available: With " -"<literal>FileLimit</literal> can be specified how many PDiff files are " -"downloaded at most to update a file. <literal>SizeLimit</literal> on the " -"other hand is the maximum percentage of the size of all patches compared to " -"the size of the targeted file. If one of these limits is exceeded the " -"complete file is downloaded instead of the patches." +"Two sub-options to limit the use of PDiffs are also available: " +"<literal>FileLimit</literal> can be used to specify a maximum number of " +"PDiff files should be downloaded to update a file. <literal>SizeLimit</" +"literal> on the other hand is the maximum percentage of the size of all " +"patches compared to the size of the targeted file. If one of these limits is " +"exceeded the complete file is downloaded instead of the patches." msgstr "" "Se ofrecen dos opciones secundarias para limitar el uso de «PDiffs»: " "<literal>FileLimit</literal> permite definir cuántos ficheros «PDiff» como " @@ -3909,8 +3968,8 @@ msgstr "" "parches comparados con el tamaño del fichero destino. Si se supera uno de " "estos límites, se descargará el fichero completo en lugar de los parches." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:305 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:341 msgid "" "Queuing mode; <literal>Queue-Mode</literal> can be one of <literal>host</" "literal> or <literal>access</literal> which determines how APT parallelizes " @@ -3924,8 +3983,8 @@ msgstr "" "una conexión por máquina de destino, <literal>access</literal> significa que " "se abrirá una conexión por cada tipo de URI." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:313 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:349 msgid "" "Number of retries to perform. If this is non-zero APT will retry failed " "files the given number of times." @@ -3933,8 +3992,8 @@ msgstr "" "El número de reintentos a realizar. Si es distinto de cero APT volverá a " "intentar obtener los ficheros fallidos el número de veces proporcionado." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:318 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:354 msgid "" "Use symlinks for source archives. If set to true then source archives will " "be symlinked when possible instead of copying. True is the default." @@ -3943,15 +4002,24 @@ msgstr "" "fuente se enlazarán cuando sea posible, en vez de copiarse. Es «true» de " "forma predeterminada." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:323 -msgid "" -"HTTP URIs; http::Proxy is the default http proxy to use. It is in the " -"standard form of <literal>http://[[user][:pass]@]host[:port]/</literal>. Per " -"host proxies can also be specified by using the form <literal>http::Proxy::" -"<host></literal> with the special keyword <literal>DIRECT</literal> " -"meaning to use no proxies. If no one of the above settings is specified, " -"<envar>http_proxy</envar> environment variable will be used." +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:359 +#, fuzzy +#| msgid "" +#| "HTTP URIs; http::Proxy is the default http proxy to use. It is in the " +#| "standard form of <literal>http://[[user][:pass]@]host[:port]/</literal>. " +#| "Per host proxies can also be specified by using the form <literal>http::" +#| "Proxy::<host></literal> with the special keyword <literal>DIRECT</" +#| "literal> meaning to use no proxies. If no one of the above settings is " +#| "specified, <envar>http_proxy</envar> environment variable will be used." +msgid "" +"<literal>http::Proxy</literal> sets the default proxy to use for HTTP URIs. " +"It is in the standard form of <literal>http://[[user][:pass]@]host[:port]/</" +"literal>. Per host proxies can also be specified by using the form " +"<literal>http::Proxy::<host></literal> with the special keyword " +"<literal>DIRECT</literal> meaning to use no proxies. If no one of the above " +"settings is specified, <envar>http_proxy</envar> environment variable will " +"be used." msgstr "" "HTTP URI, http::Proxy es el proxy http predeterminado a usar. Usa el formato " "estándar <literal>http://[[usuario][:contraseña]@]máquina[:puerto]/</" @@ -3961,18 +4029,27 @@ msgstr "" "La variable de entorno <envar>http_proxy</envar> se usará en caso de no " "definir ninguna de las opciones anteriores." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:331 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:367 +#, fuzzy +#| msgid "" +#| "Three settings are provided for cache control with HTTP/1.1 compliant " +#| "proxy caches. <literal>No-Cache</literal> tells the proxy to not use its " +#| "cached response under any circumstances, <literal>Max-Age</literal> is " +#| "sent only for index files and tells the cache to refresh its object if it " +#| "is older than the given number of seconds. Debian updates its index files " +#| "daily so the default is 1 day. <literal>No-Store</literal> specifies that " +#| "the cache should never store this request, it is only set for archive " +#| "files. This may be useful to prevent polluting a proxy cache with very " +#| "large .deb files. Note: Squid 2.0.2 does not support any of these options." msgid "" "Three settings are provided for cache control with HTTP/1.1 compliant proxy " -"caches. <literal>No-Cache</literal> tells the proxy to not use its cached " -"response under any circumstances, <literal>Max-Age</literal> is sent only " -"for index files and tells the cache to refresh its object if it is older " -"than the given number of seconds. Debian updates its index files daily so " -"the default is 1 day. <literal>No-Store</literal> specifies that the cache " -"should never store this request, it is only set for archive files. This may " -"be useful to prevent polluting a proxy cache with very large .deb files. " -"Note: Squid 2.0.2 does not support any of these options." +"caches. <literal>No-Cache</literal> tells the proxy not to use its cached " +"response under any circumstances. <literal>Max-Age</literal> sets the " +"allowed maximum age (in seconds) of an index file in the cache of the " +"proxy. <literal>No-Store</literal> specifies that the proxy should not " +"store the requested archive files in its cache, which can be used to prevent " +"the proxy from polluting its cache with (big) .deb files." msgstr "" "Para los proxies que cumplen con HTTP/1.1 se proporcionan tres opciones de " "configuración para el control de la caché. <literal>No-Cache</literal> dice " @@ -3986,44 +4063,55 @@ msgstr "" "ser útil para prevenir que un proxy se contamine con ficheros «.deb» muy " "grandes. Aviso: Squid 2.0.2 no permite usar ninguna de estas opciones." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:341 apt.conf.5.xml:407 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:377 apt.conf.5.xml:449 +#, fuzzy +#| msgid "" +#| "The option <literal>timeout</literal> sets the timeout timer used by the " +#| "method; this applies to all things including connection timeout and data " +#| "timeout." msgid "" "The option <literal>timeout</literal> sets the timeout timer used by the " -"method, this applies to all things including connection timeout and data " -"timeout." +"method; this value applies to the connection as well as the data timeout." msgstr "" "La opción <literal>timeout</literal> define el tiempo máximo de espera usado " "por el método, esto se aplica a todo, incluyendo el tiempo de espera para " "realizar la conexión y para recibir datos." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:344 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:380 msgid "" "The setting <literal>Acquire::http::Pipeline-Depth</literal> can be used to " -"enabled HTTP pipeling (RFC 2616 section 8.1.2.2) which can be beneficial e." -"g. on high-latency connections. It specifies how many requests are send in a " +"enable HTTP pipelining (RFC 2616 section 8.1.2.2) which can be beneficial e." +"g. on high-latency connections. It specifies how many requests are sent in a " "pipeline. Previous APT versions had a default of 10 for this setting, but " "the default value is now 0 (= disabled) to avoid problems with the ever-" "growing amount of webservers and proxies which choose to not conform to the " "HTTP/1.1 specification." msgstr "" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:351 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:387 msgid "" -"<literal>Acquire::http::AllowRedirect</literal> controls if APT will follow " -"redirects, which is enabled by default." +"<literal>Acquire::http::AllowRedirect</literal> controls whether APT will " +"follow redirects, which is enabled by default." msgstr "" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:354 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:390 +#, fuzzy +#| msgid "" +#| "The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</" +#| "literal> which accepts integer values in kilobytes. The default value is " +#| "0 which deactivates the limit and tries uses as much as possible of the " +#| "bandwidth (Note that this option implicit deactivates the download from " +#| "multiple servers at the same time.)" msgid "" "The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</" -"literal> which accepts integer values in kilobyte. The default value is 0 " -"which deactivates the limit and tries uses as much as possible of the " -"bandwidth (Note that this option implicit deactivates the download from " -"multiple servers at the same time.)" +"literal> which accepts integer values in kilobytes. The default value is 0 " +"which deactivates the limit and tries to use all available bandwidth (note " +"that this option implicitly disables downloading from multiple servers at " +"the same time.)" msgstr "" "El ancho de banda usado se puede limitar mediante <literal>Acquire::http::Dl-" "Limit</literal>, que acepta valores enteros en kilobytes. El valor " @@ -4031,8 +4119,8 @@ msgstr "" "posible del ancho de banda. (Tenga en cuenta que esta opción desactiva " "implícitamente la descarga simultánea desde varios servidores)." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:359 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:395 msgid "" "<literal>Acquire::http::User-Agent</literal> can be used to set a different " "User-Agent for the http download method as some proxies allow access for " @@ -4042,14 +4130,22 @@ msgstr "" "«User-Agent» distinto para la descarga http ya que algunos proxys sólo " "permiten el acceso para clientes que usan un identificador conocido." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:366 -msgid "" -"HTTPS URIs. Cache-control, Timeout, AllowRedirect, Dl-Limit and proxy " -"options are the same as for <literal>http</literal> method and will also " -"default to the options from the <literal>http</literal> method if they are " -"not explicitly set for https. <literal>Pipeline-Depth</literal> option is " -"not supported yet." +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:403 +#, fuzzy +#| msgid "" +#| "HTTPS URIs. Cache-control, Timeout, AllowRedirect, Dl-Limit and proxy " +#| "options are the same as for <literal>http</literal> method and will also " +#| "default to the options from the <literal>http</literal> method if they " +#| "are not explicitly set for https. <literal>Pipeline-Depth</literal> " +#| "option is not supported yet." +msgid "" +"The <literal>Cache-control</literal>, <literal>Timeout</literal>, " +"<literal>AllowRedirect</literal>, <literal>Dl-Limit</literal> and " +"<literal>proxy</literal> options work for HTTPS URIs in the same way as for " +"the <literal>http</literal> method, and default to the same values if they " +"are not explicitly set. The <literal>Pipeline-Depth</literal> option is not " +"yet supported." msgstr "" "HTTPS URI. Las opciones de control de «Cache», «timeout», «AllowRedirect», " "«Dl-Limit» y del proxy son las mismas que para el método <literal>http</" @@ -4057,25 +4153,44 @@ msgstr "" "<literal>http</literal> si no están explícitamente definidas para https. La " "opción <literal>Pipeline-Depth</literal> no se puede usar por ahora." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:372 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:411 +#, fuzzy +#| msgid "" +#| "<literal>CaInfo</literal> suboption specifies place of file that holds " +#| "info about trusted certificates. <literal><host>::CaInfo</literal> " +#| "is the corresponding per-host option. <literal>Verify-Peer</literal> " +#| "boolean suboption determines whether verify server's host certificate " +#| "against trusted certificates or not. <literal><host>::Verify-Peer</" +#| "literal> is the corresponding per-host option. <literal>Verify-Host</" +#| "literal> boolean suboption determines whether verify server's hostname or " +#| "not. <literal><host>::Verify-Host</literal> is the corresponding " +#| "per-host option. <literal>SslCert</literal> determines what certificate " +#| "to use for client authentication. <literal><host>::SslCert</" +#| "literal> is the corresponding per-host option. <literal>SslKey</literal> " +#| "determines what private key to use for client authentication. " +#| "<literal><host>::SslKey</literal> is the corresponding per-host " +#| "option. <literal>SslForceVersion</literal> overrides default SSL version " +#| "to use. Can contain 'TLSv1' or 'SSLv3' string. <literal><host>::" +#| "SslForceVersion</literal> is the corresponding per-host option." msgid "" "<literal>CaInfo</literal> suboption specifies place of file that holds info " -"about trusted certificates. <literal><host>::CaInfo</literal> is " +"about trusted certificates. <literal><host>::CaInfo</literal> is the " "corresponding per-host option. <literal>Verify-Peer</literal> boolean " -"suboption determines whether verify server's host certificate against " -"trusted certificates or not. <literal><host>::Verify-Peer</literal> " -"is corresponding per-host option. <literal>Verify-Host</literal> boolean " -"suboption determines whether verify server's hostname or not. <literal><" -"host>::Verify-Host</literal> is corresponding per-host option. " -"<literal>SslCert</literal> determines what certificate to use for client " -"authentication. <literal><host>::SslCert</literal> is corresponding " -"per-host option. <literal>SslKey</literal> determines what private key to " -"use for client authentication. <literal><host>::SslKey</literal> is " -"corresponding per-host option. <literal>SslForceVersion</literal> overrides " -"default SSL version to use. Can contain 'TLSv1' or 'SSLv3' string. " -"<literal><host>::SslForceVersion</literal> is corresponding per-host " -"option." +"suboption determines whether or not the server's host certificate should be " +"verified against trusted certificates. <literal><host>::Verify-Peer</" +"literal> is the corresponding per-host option. <literal>Verify-Host</" +"literal> boolean suboption determines whether or not the server's hostname " +"should be verified. <literal><host>::Verify-Host</literal> is the " +"corresponding per-host option. <literal>SslCert</literal> determines what " +"certificate to use for client authentication. <literal><host>::" +"SslCert</literal> is the corresponding per-host option. <literal>SslKey</" +"literal> determines what private key to use for client authentication. " +"<literal><host>::SslKey</literal> is the corresponding per-host " +"option. <literal>SslForceVersion</literal> overrides default SSL version to " +"use. It can contain either of the strings '<literal>TLSv1</literal>' or " +"'<literal>SSLv3</literal>'. <literal><host>::SslForceVersion</" +"literal> is the corresponding per-host option." msgstr "" "La sub-opción <literal>CaInfo</literal> define el lugar del fichero que " "contiene la información sobre los certificados de confianza. <literal><" @@ -4094,23 +4209,39 @@ msgstr "" "ser «TLSv1» o «SSLv3». <literal><host>::SslForceVersion</literal> " "corresponde a la opción por máquina." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:391 -msgid "" -"FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the standard " -"form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. Per host " -"proxies can also be specified by using the form <literal>ftp::Proxy::<" -"host></literal> with the special keyword <literal>DIRECT</literal> " -"meaning to use no proxies. If no one of the above settings is specified, " -"<envar>ftp_proxy</envar> environment variable will be used. To use a ftp " -"proxy you will have to set the <literal>ftp::ProxyLogin</literal> script in " -"the configuration file. This entry specifies the commands to send to tell " -"the proxy server what to connect to. Please see &configureindex; for an " -"example of how to do this. The substitution variables available are <literal>" -"$(PROXY_USER)</literal> <literal>$(PROXY_PASS)</literal> <literal>" -"$(SITE_USER)</literal> <literal>$(SITE_PASS)</literal> <literal>$(SITE)</" -"literal> and <literal>$(SITE_PORT)</literal> Each is taken from it's " -"respective URI component." +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:432 +#, fuzzy +#| msgid "" +#| "FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the " +#| "standard form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. " +#| "Per host proxies can also be specified by using the form <literal>ftp::" +#| "Proxy::<host></literal> with the special keyword <literal>DIRECT</" +#| "literal> meaning to use no proxies. If no one of the above settings is " +#| "specified, <envar>ftp_proxy</envar> environment variable will be used. To " +#| "use a ftp proxy you will have to set the <literal>ftp::ProxyLogin</" +#| "literal> script in the configuration file. This entry specifies the " +#| "commands to send to tell the proxy server what to connect to. Please see " +#| "&configureindex; for an example of how to do this. The substitution " +#| "variables available are <literal>$(PROXY_USER)</literal> <literal>" +#| "$(PROXY_PASS)</literal> <literal>$(SITE_USER)</literal> <literal>" +#| "$(SITE_PASS)</literal> <literal>$(SITE)</literal> and <literal>" +#| "$(SITE_PORT)</literal> Each is taken from it's respective URI component." +msgid "" +"<literal>ftp::Proxy</literal> sets the default proxy to use for FTP URIs. " +"It is in the standard form of <literal>ftp://[[user][:pass]@]host[:port]/</" +"literal>. Per host proxies can also be specified by using the form " +"<literal>ftp::Proxy::<host></literal> with the special keyword " +"<literal>DIRECT</literal> meaning to use no proxies. If no one of the above " +"settings is specified, <envar>ftp_proxy</envar> environment variable will be " +"used. To use an FTP proxy you will have to set the <literal>ftp::ProxyLogin</" +"literal> script in the configuration file. This entry specifies the commands " +"to send to tell the proxy server what to connect to. Please see " +"&configureindex; for an example of how to do this. The substitution " +"variables representing the corresponding URI component are <literal>" +"$(PROXY_USER)</literal>, <literal>$(PROXY_PASS)</literal>, <literal>" +"$(SITE_USER)</literal>, <literal>$(SITE_PASS)</literal>, <literal>$(SITE)</" +"literal> and <literal>$(SITE_PORT)</literal>." msgstr "" "FTP URI, ftp::Proxy es el proxy ftp predeterminado a usar. Usa el formato " "estándar <literal>ftp://[[usuario][:contraseña]@]máquina[:puerto]/</" @@ -4128,14 +4259,22 @@ msgstr "" "$(SITE_PORT)</literal>, cada uno tomada de su respectivo componente de la " "URI." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:410 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:452 +#, fuzzy +#| msgid "" +#| "Several settings are provided to control passive mode. Generally it is " +#| "safe to leave passive mode on; it works in nearly every environment. " +#| "However, some situations require that passive mode be disabled and port " +#| "mode FTP used instead. This can be done globally, for connections that go " +#| "through a proxy or for a specific host (See the sample config file for " +#| "examples)." msgid "" "Several settings are provided to control passive mode. Generally it is safe " -"to leave passive mode on, it works in nearly every environment. However " -"some situations require that passive mode be disabled and port mode ftp used " -"instead. This can be done globally, for connections that go through a proxy " -"or for a specific host (See the sample config file for examples)." +"to leave passive mode on; it works in nearly every environment. However, " +"some situations require that passive mode be disabled and port mode FTP used " +"instead. This can be done globally or for connections that go through a " +"proxy or for a specific host (see the sample config file for examples)." msgstr "" "Puede controlar el modo pasivo a través de varias opciones. Generalmente es " "seguro dejar activado el modo pasivo, y funciona en casi todos los entornos. " @@ -4144,11 +4283,11 @@ msgstr "" "conexiones a través de un proxy o para una máquina en concreto (vea el " "fichero de configuración de muestra para ver algunos ejemplos)." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:417 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:459 msgid "" "It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</" -"envar> environment variable to a http url - see the discussion of the http " +"envar> environment variable to an HTTP URL - see the discussion of the http " "method above for syntax. You cannot set this in the configuration file and " "it is not recommended to use FTP over HTTP due to its low efficiency." msgstr "" @@ -4158,8 +4297,8 @@ msgstr "" "en el fichero de configuración y no se recomienda el uso de ftp por encima " "de http debido a su poca eficiencia." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:422 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:464 msgid "" "The setting <literal>ForceExtended</literal> controls the use of RFC2428 " "<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is " @@ -4174,23 +4313,33 @@ msgstr "" "IPv4. Tenga en cuenta que la mayoría de los servidores de FTP no son " "compatibles con la RFC 2428." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:435 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><literallayout> +#: apt.conf.5.xml:478 #, no-wrap msgid "/cdrom/::Mount \"foo\";" msgstr "/cdrom/::Mount \"algo\";" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:430 -msgid "" -"CD-ROM URIs; the only setting for CD-ROM URIs is the mount point, " -"<literal>cdrom::Mount</literal> which must be the mount point for the CD-ROM " -"drive as specified in <filename>/etc/fstab</filename>. It is possible to " -"provide alternate mount and unmount commands if your mount point cannot be " -"listed in the fstab (such as an SMB mount and old mount packages). The " +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:473 +#, fuzzy +#| msgid "" +#| "CD-ROM URIs; the only setting for CD-ROM URIs is the mount point, " +#| "<literal>cdrom::Mount</literal> which must be the mount point for the CD-" +#| "ROM drive as specified in <filename>/etc/fstab</filename>. It is possible " +#| "to provide alternate mount and unmount commands if your mount point " +#| "cannot be listed in the fstab (such as an SMB mount and old mount " +#| "packages). The syntax is to put <placeholder type=\"literallayout\" id=" +#| "\"0\"/> within the cdrom block. It is important to have the trailing " +#| "slash. Unmount commands can be specified using UMount." +msgid "" +"For URIs using the <literal>cdrom</literal> method, the only configurable " +"option is the mount point, <literal>cdrom::Mount</literal>, which must be " +"the mount point for the CD-ROM (or DVD, or whatever) drive as specified in " +"<filename>/etc/fstab</filename>. It is possible to provide alternate mount " +"and unmount commands if your mount point cannot be listed in the fstab. The " "syntax is to put <placeholder type=\"literallayout\" id=\"0\"/> within the " -"cdrom block. It is important to have the trailing slash. Unmount commands " -"can be specified using UMount." +"<literal>cdrom</literal> block. It is important to have the trailing slash. " +"Unmount commands can be specified using UMount." msgstr "" "CD-ROM URI, la única opción de configuración para las URI de CD-ROM es el " "punto de montaje. <literal>cdrom::Mount</literal> debe ser el punto de " @@ -4202,31 +4351,35 @@ msgstr "" "cdrom. Es importante dejar una barra al final. Puede especificar órdenes " "para desmontar usando UMount." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:441 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:486 +#, fuzzy +#| msgid "" +#| "GPGV URIs; the only option for GPGV URIs is the option to pass additional " +#| "parameters to gpgv. <literal>gpgv::Options</literal> Additional options " +#| "passed to gpgv." msgid "" -"GPGV URIs; the only option for GPGV URIs is the option to pass additional " -"parameters to gpgv. <literal>gpgv::Options</literal> Additional options " -"passed to gpgv." +"For GPGV URIs the only configurable option is <literal>gpgv::Options</" +"literal>, which passes additional parameters to gpgv." msgstr "" "GPGV URI, la única opción para las URI de GPGV es la entrega de parámetros " "adicionales a gpgv. <literal>gpgv::Options</literal> Parámetros adicionales " "introducidos a gpgv." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:452 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis> +#: apt.conf.5.xml:497 #, no-wrap msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";" msgstr "Acquire::CompressionTypes::<replaceable>extensión-del-fichero</replaceable> \"<replaceable>nombre-del-método</replaceable>\";" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:447 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:492 msgid "" "List of compression types which are understood by the acquire methods. " "Files like <filename>Packages</filename> can be available in various " -"compression formats. Per default the acquire methods can decompress " +"compression formats. By default the acquire methods can decompress " "<command>bzip2</command>, <command>lzma</command> and <command>gzip</" -"command> compressed files, with this setting more formats can be added on " +"command> compressed files; with this setting more formats can be added on " "the fly or the used method can be changed. The syntax for this is: " "<placeholder type=\"synopsis\" id=\"0\"/>" msgstr "" @@ -4239,33 +4392,49 @@ msgstr "" "método usado. La sintaxis para esto es: <placeholder type=\"synopsis\" id=" "\"0\"/>" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:457 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis> +#: apt.conf.5.xml:502 #, no-wrap msgid "Acquire::CompressionTypes::Order:: \"gz\";" msgstr "Acquire::CompressionTypes::Order:: \"gz\";" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:460 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis> +#: apt.conf.5.xml:505 #, no-wrap msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" msgstr "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:453 -msgid "" -"Also the <literal>Order</literal> subgroup can be used to define in which " +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:498 +#, fuzzy +#| msgid "" +#| "Also, the <literal>Order</literal> subgroup can be used to define in " +#| "which order the acquire system will try to download the compressed files. " +#| "The acquire system will try the first and proceed with the next " +#| "compression type in this list on error, so to prefer one over the other " +#| "type simply add the preferred type first - not already added default " +#| "types will be added at run time to the end of the list, so e.g. " +#| "<placeholder type=\"synopsis\" id=\"0\"/> can be used to prefer " +#| "<command>gzip</command> compressed files over <command>bzip2</command> " +#| "and <command>lzma</command>. If <command>lzma</command> should be " +#| "preferred over <command>gzip</command> and <command>bzip2</command> the " +#| "configure setting should look like this <placeholder type=\"synopsis\" id=" +#| "\"1\"/> It is not needed to add <literal>bz2</literal> explicit to the " +#| "list as it will be added automatic." +msgid "" +"Also, the <literal>Order</literal> subgroup can be used to define in which " "order the acquire system will try to download the compressed files. The " "acquire system will try the first and proceed with the next compression type " -"in this list on error, so to prefer one over the other type simple add the " -"preferred type at first - not already added default types will be added at " -"run time to the end of the list, so e.g. <placeholder type=\"synopsis\" id=" +"in this list on error, so to prefer one over the other type simply add the " +"preferred type first - default types not already added will be implicitly " +"appended to the end of the list, so e.g. <placeholder type=\"synopsis\" id=" "\"0\"/> can be used to prefer <command>gzip</command> compressed files over " "<command>bzip2</command> and <command>lzma</command>. If <command>lzma</" "command> should be preferred over <command>gzip</command> and " -"<command>bzip2</command> the configure setting should look like this " +"<command>bzip2</command> the configure setting should look like this: " "<placeholder type=\"synopsis\" id=\"1\"/> It is not needed to add " -"<literal>bz2</literal> explicit to the list as it will be added automatic." +"<literal>bz2</literal> to the list explicitly as it will be added " +"automatically." msgstr "" "El subgrupo <literal>Order</literal> también se puede usar para definir en " "qué orden el sistema de «acquire» intentará descargar los ficheros " @@ -4282,14 +4451,14 @@ msgstr "" "\"synopsis\" id=\"1\"/> No es necesario añadir <literal>bz2</literal> a la " "lista ya que se añadirá de forma automática." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:464 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><literallayout> +#: apt.conf.5.xml:512 #, no-wrap msgid "Dir::Bin::bzip2 \"/bin/bzip2\";" msgstr "Dir::Bin::bzip2 \"/bin/bzip2\";" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:462 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:507 #, fuzzy #| msgid "" #| "Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</" @@ -4300,19 +4469,19 @@ msgstr "Dir::Bin::bzip2 \"/bin/bzip2\";" #| "end of the list specified in the configuration files, but before the " #| "default entries. To prefer a type in this case over the ones specified in " #| "in the configuration files you can set the option direct - not in list " -#| "style. This will not override the defined list, it will only prefix the " +#| "style. This will not override the defined list; it will only prefix the " #| "list with this type." msgid "" -"Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</" -"replaceable></literal> will be checked: If this setting exists the method " -"will only be used if this file exists, e.g. for the bzip2 method (the " -"inbuilt) setting is: <placeholder type=\"literallayout\" id=\"0\"/> Note " -"also that list entries specified on the command line will be added at the " -"end of the list specified in the configuration files, but before the default " -"entries. To prefer a type in this case over the ones specified in the " -"configuration files you can set the option direct - not in list style. This " -"will not override the defined list, it will only prefix the list with this " -"type." +"Note that the <literal>Dir::Bin::<replaceable>Methodname</replaceable></" +"literal> will be checked at run time. If this option has been set, the " +"method will only be used if this file exists; e.g. for the <literal>bzip2</" +"literal> method (the inbuilt) setting is: <placeholder type=\"literallayout" +"\" id=\"0\"/> Note also that list entries specified on the command line will " +"be added at the end of the list specified in the configuration files, but " +"before the default entries. To prefer a type in this case over the ones " +"specified in the configuration files you can set the option direct - not in " +"list style. This will not override the defined list; it will only prefix " +"the list with this type." msgstr "" "Tenga en cuenta que durante la ejecución se comprobará la opción " "<literal>Dir::Bin::<replaceable>nombre-del-método</replaceable></literal>. " @@ -4326,16 +4495,16 @@ msgstr "" "opción directamente (no en el formato de lista). Esto no sobrescribirá la " "lista definida, sólo añadirá este tipo al principio de la lista." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:469 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:517 msgid "" "The special type <literal>uncompressed</literal> can be used to give " "uncompressed files a preference, but note that most archives don't provide " "uncompressed files so this is mostly only useable for local mirrors." msgstr "" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:476 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:524 msgid "" "When downloading <literal>gzip</literal> compressed indexes (Packages, " "Sources, or Translations), keep them gzip compressed locally instead of " @@ -4348,17 +4517,26 @@ msgstr "" "a costa de mayores requerimientos del procesador al generar los almacenes de " "paquetes locales. El valor predeterminado es «false»." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:484 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:532 +#, fuzzy +#| msgid "" +#| "The Languages subsection controls which <filename>Translation</filename> " +#| "files are downloaded and in which order APT tries to display the " +#| "description-translations. APT will try to display the first available " +#| "description in the language which is listed first. Languages can be " +#| "defined with their short or long language codes. Note that not all " +#| "archives provide <filename>Translation</filename> files for every " +#| "Language - especially the long Languagecodes are rare, so please inform " +#| "you which ones are available before you set here impossible values." msgid "" "The Languages subsection controls which <filename>Translation</filename> " -"files are downloaded and in which order APT tries to display the Description-" -"Translations. APT will try to display the first available Description in the " -"Language which is listed at first. Languages can be defined with their short " -"or long Languagecodes. Note that not all archives provide " -"<filename>Translation</filename> files for every Language - especially the " -"long Languagecodes are rare, so please inform you which ones are available " -"before you set here impossible values." +"files are downloaded and in which order APT tries to display the description-" +"translations. APT will try to display the first available description in the " +"language which is listed first. Languages can be defined with their short or " +"long language codes. Note that not all archives provide " +"<filename>Translation</filename> files for every language - the long " +"language codes are especially rare." msgstr "" "La subsección «Languages» controla qué ficheros <filename>Translation</" "filename> se descargan y en qué orden APT intentará mostrar las traducciones " @@ -4369,33 +4547,52 @@ msgstr "" "idioma (especialmente para los códigos de idioma largos), por lo que debería " "informarse de cuales están disponibles antes de definir valores imposibles." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><programlisting> -#: apt.conf.5.xml:500 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><programlisting> +#: apt.conf.5.xml:549 #, no-wrap msgid "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; };" msgstr "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; }" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:490 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:537 +#, fuzzy +#| msgid "" +#| "The default list includes \"environment\" and \"en\". " +#| "\"<literal>environment</literal>\" has a special meaning here: It will be " +#| "replaced at runtime with the languagecodes extracted from the " +#| "<literal>LC_MESSAGES</literal> environment variable. It will also ensure " +#| "that these codes are not included twice in the list. If " +#| "<literal>LC_MESSAGES</literal> is set to \"C\" only the " +#| "<filename>Translation-en</filename> file (if available) will be used. To " +#| "force APT to use no Translation file use the setting <literal>Acquire::" +#| "Languages=none</literal>. \"<literal>none</literal>\" is another special " +#| "meaning code which will stop the search for a suitable " +#| "<filename>Translation</filename> file. This can be used by the system " +#| "administrator to let APT know that it should download also this files " +#| "without actually use them if the environment doesn't specify this " +#| "languages. So the following example configuration will result in the " +#| "order \"en, de\" in an english and in \"de, en\" in a german " +#| "localization. Note that \"fr\" is downloaded, but not used if APT is not " +#| "used in a french localization, in such an environment the order would be " +#| "\"fr, de, en\". <placeholder type=\"programlisting\" id=\"0\"/>" msgid "" "The default list includes \"environment\" and \"en\". " -"\"<literal>environment</literal>\" has a special meaning here: It will be " -"replaced at runtime with the languagecodes extracted from the " +"\"<literal>environment</literal>\" has a special meaning here: it will be " +"replaced at runtime with the language codes extracted from the " "<literal>LC_MESSAGES</literal> environment variable. It will also ensure " "that these codes are not included twice in the list. If " "<literal>LC_MESSAGES</literal> is set to \"C\" only the " "<filename>Translation-en</filename> file (if available) will be used. To " -"force apt to use no Translation file use the setting <literal>Acquire::" +"force APT to use no Translation file use the setting <literal>Acquire::" "Languages=none</literal>. \"<literal>none</literal>\" is another special " -"meaning code which will stop the search for a fitting <filename>Translation</" -"filename> file. This can be used by the system administrator to let APT " -"know that it should download also this files without actually use them if " -"the environment doesn't specify this languages. So the following example " -"configuration will result in the order \"en, de\" in an english and in \"de, " -"en\" in a german localization. Note that \"fr\" is downloaded, but not used " -"if APT is not used in a french localization, in such an environment the " -"order would be \"fr, de, en\". <placeholder type=\"programlisting\" id=" -"\"0\"/>" +"meaning code which will stop the search for a suitable " +"<filename>Translation</filename> file. This tells APT to download these " +"translations too, without actually using them unless the environment " +"specifies the languages. So the following example configuration will result " +"in the order \"en, de\" in an English locale or \"de, en\" in a German one. " +"Note that \"fr\" is downloaded, but not used unless APT is used in a French " +"locale (where the order would be \"fr, de, en\"). <placeholder type=" +"\"programlisting\" id=\"0\"/>" msgstr "" "La lista predeterminada incluye «environment» y «en». «<literal>environment</" "literal>» tiene un significado especial aquí; se reemplazará durante la " @@ -4417,8 +4614,8 @@ msgstr "" "(«environment») sería «fr, de, en». <placeholder type=\"programlisting\" id=" "\"0\"/>" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:501 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:550 msgid "" "Note: To prevent problems resulting from APT being executed in different " "environments (e.g. by different users or by other programs) all Translation " @@ -4427,48 +4624,59 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:512 +#: apt.conf.5.xml:560 msgid "Directories" msgstr "Directorios" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:514 +#: apt.conf.5.xml:562 #, fuzzy #| msgid "" #| "The <literal>Dir::State</literal> section has directories that pertain to " #| "local state information. <literal>lists</literal> is the directory to " #| "place downloaded package lists in and <literal>status</literal> is the " -#| "name of the dpkg status file. <literal>preferences</literal> is the name " -#| "of the APT preferences file. <literal>Dir::State</literal> contains the " -#| "default directory to prefix on all sub items if they do not start with " -#| "<filename>/</filename> or <filename>./</filename>." +#| "name of the &dpkg; status file. <literal>preferences</literal> is the " +#| "name of the APT preferences file. <literal>Dir::State</literal> contains " +#| "the default directory to prefix on all sub-items if they do not start " +#| "with <filename>/</filename> or <filename>./</filename>." msgid "" "The <literal>Dir::State</literal> section has directories that pertain to " "local state information. <literal>lists</literal> is the directory to place " "downloaded package lists in and <literal>status</literal> is the name of the " -"dpkg status file. <literal>preferences</literal> is the name of the APT " +"&dpkg; status file. <literal>preferences</literal> is the name of the APT " "<filename>preferences</filename> file. <literal>Dir::State</literal> " -"contains the default directory to prefix on all sub items if they do not " +"contains the default directory to prefix on all sub-items if they do not " "start with <filename>/</filename> or <filename>./</filename>." msgstr "" "La sección <literal>Dir::State</literal> contiene directorios que afectan a " "la información de estado local. <literal>lists</literal> es el directorio en " "el que se almacenan las listas de los paquetes descargados y " -"<literal>status</literal> es el nombre del fichero de estado de dpkg. " +"<literal>status</literal> es el nombre del fichero de estado de &dpkg;. " "<literal>preferences</literal> es el nombre del fichero de preferencias de " "APT. <literal>Dir::State</literal> contiene el directorio que se usará como " "prefijo predeterminado en todos los elementos subordinados en caso de que no " "empiecen con <filename>/</filename> ó <filename>./</filename>." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:521 +#: apt.conf.5.xml:569 +#, fuzzy +#| msgid "" +#| "<literal>Dir::Cache</literal> contains locations pertaining to local " +#| "cache information, such as the two package caches <literal>srcpkgcache</" +#| "literal> and <literal>pkgcache</literal> as well as the location to place " +#| "downloaded archives, <literal>Dir::Cache::archives</literal>. Generation " +#| "of caches can be turned off by setting their names to be blank. This will " +#| "slow down startup but save disk space. It is probably preferable to turn " +#| "off the pkgcache rather than the srcpkgcache. Like <literal>Dir::State</" +#| "literal> the default directory is contained in <literal>Dir::Cache</" +#| "literal>" msgid "" "<literal>Dir::Cache</literal> contains locations pertaining to local cache " "information, such as the two package caches <literal>srcpkgcache</literal> " "and <literal>pkgcache</literal> as well as the location to place downloaded " "archives, <literal>Dir::Cache::archives</literal>. Generation of caches can " -"be turned off by setting their names to be blank. This will slow down " -"startup but save disk space. It is probably preferred to turn off the " +"be turned off by setting their names to the empty string. This will slow " +"down startup but save disk space. It is probably preferable to turn off the " "pkgcache rather than the srcpkgcache. Like <literal>Dir::State</literal> the " "default directory is contained in <literal>Dir::Cache</literal>" msgstr "" @@ -4483,7 +4691,7 @@ msgstr "" "predeterminado está en <literal>Dir::Cache</literal>" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:530 +#: apt.conf.5.xml:578 msgid "" "<literal>Dir::Etc</literal> contains the location of configuration files, " "<literal>sourcelist</literal> gives the location of the sourcelist and " @@ -4499,7 +4707,7 @@ msgstr "" "<envar>APT_CONFIG</envar>)." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:536 +#: apt.conf.5.xml:584 msgid "" "The <literal>Dir::Parts</literal> setting reads in all the config fragments " "in lexical order from the directory specified. After this is done then the " @@ -4510,7 +4718,7 @@ msgstr "" "Al finalizar este proceso carga el fichero de configuración principal." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:540 +#: apt.conf.5.xml:588 msgid "" "Binary programs are pointed to by <literal>Dir::Bin</literal>. <literal>Dir::" "Bin::Methods</literal> specifies the location of the method handlers and " @@ -4527,7 +4735,7 @@ msgstr "" "literal> especifican la ubicación de sus respectivos programas." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:548 +#: apt.conf.5.xml:596 msgid "" "The configuration item <literal>RootDir</literal> has a special meaning. If " "set, all paths in <literal>Dir::</literal> will be relative to " @@ -4548,7 +4756,7 @@ msgstr "" "staging/var/lib/dpkg/status</filename>." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:561 +#: apt.conf.5.xml:609 msgid "" "The <literal>Ignore-Files-Silently</literal> list can be used to specify " "which files APT should silently ignore while parsing the files in the " @@ -4566,15 +4774,15 @@ msgstr "" "de expresiones regulares." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:570 +#: apt.conf.5.xml:618 msgid "APT in DSelect" msgstr "APT con DSelect" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:572 +#: apt.conf.5.xml:620 msgid "" "When APT is used as a &dselect; method several configuration directives " -"control the default behaviour. These are in the <literal>DSelect</literal> " +"control the default behavior. These are in the <literal>DSelect</literal> " "section." msgstr "" "Varias directivas de configuración controlan el comportamiento " @@ -4582,43 +4790,47 @@ msgstr "" "encuentran en la sección <literal>DSelect</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:577 +#: apt.conf.5.xml:625 msgid "" -"Cache Clean mode; this value may be one of always, prompt, auto, pre-auto " -"and never. always and prompt will remove all packages from the cache after " -"upgrading, prompt (the default) does so conditionally. auto removes only " -"those packages which are no longer downloadable (replaced with a new version " -"for instance). pre-auto performs this action before downloading new " -"packages." +"Cache Clean mode; this value may be one of <literal>always</literal>, " +"<literal>prompt</literal>, <literal>auto</literal>, <literal>pre-auto</" +"literal> and <literal>never</literal>. <literal>always</literal> and " +"<literal>prompt</literal> will remove all packages from the cache after " +"upgrading, <literal>prompt</literal> (the default) does so conditionally. " +"<literal>auto</literal> removes only those packages which are no longer " +"downloadable (replaced with a new version for instance). <literal>pre-auto</" +"literal> performs this action before downloading new packages." msgstr "" -"Modo de limpieza del almacén, este valor puede ser «always», «prompt», " -"«auto», «pre-auto» y «never». Los valores «always» y «prompt» borrarán todos " -"los paquetes del almacén después de actualizar, «prompt» (el valor " -"predeterminado) preguntará primero. El valor «auto» borrará sólo aquellos " -"paquetes que ya no se pueden descargar (por ejemplo, los reemplazados por " -"otra versión). El valor «pre-auto» realiza esta última acción antes de " -"descargar los paquetes nuevos." +"Modo de limpieza del almacén, este valor puede ser «<literal>always</" +"literal>», «<literal>prompt</literal>», «<literal>auto</literal>», " +"«<literal>pre-auto</literal>» y «<literal>never</literal>». Los valores " +"«<literal>always</literal>» y «<literal>prompt</literal>» borrarán todos los " +"paquetes del almacén después de actualizar, «<literal>prompt</literal>» (el " +"valor predeterminado) preguntará primero. El valor «<literal>auto</literal>» " +"borrará sólo aquellos paquetes que ya no se pueden descargar (por ejemplo, " +"los reemplazados por otra versión). El valor «<literal>pre-auto</literal>» " +"realiza esta última acción antes de descargar los paquetes nuevos." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:586 +#: apt.conf.5.xml:639 msgid "" -"The contents of this variable is passed to &apt-get; as command line options " -"when it is run for the install phase." +"The contents of this variable are passed to &apt-get; as command line " +"options when it is run for the install phase." msgstr "" "Los contenidos de esta variable se introducen a &apt-get; como opciones de " "la línea de ordenes al ejecutar la fase de instalación." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:591 +#: apt.conf.5.xml:644 msgid "" -"The contents of this variable is passed to &apt-get; as command line options " -"when it is run for the update phase." +"The contents of this variable are passed to &apt-get; as command line " +"options when it is run for the update phase." msgstr "" "Los contenidos de esta variable se introducen a &apt-get; como opciones de " "la línea de ordenes al ejecutar la fase de actualización." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:596 +#: apt.conf.5.xml:649 msgid "" "If true the [U]pdate operation in &dselect; will always prompt to continue. " "The default is to prompt only on error." @@ -4628,12 +4840,12 @@ msgstr "" "preguntará en caso de error." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:602 -msgid "How APT calls dpkg" -msgstr "Cómo invoca APT a dpkg" +#: apt.conf.5.xml:655 +msgid "How APT calls &dpkg;" +msgstr "Cómo invoca APT a &dpkg;" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:603 +#: apt.conf.5.xml:656 msgid "" "Several configuration directives control how APT invokes &dpkg;. These are " "in the <literal>DPkg</literal> section." @@ -4642,22 +4854,22 @@ msgstr "" "se encuentran en la sección <literal>DPkg</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:608 +#: apt.conf.5.xml:661 msgid "" -"This is a list of options to pass to dpkg. The options must be specified " +"This is a list of options to pass to &dpkg;. The options must be specified " "using the list notation and each list item is passed as a single argument to " "&dpkg;." msgstr "" -"Es una lista de opciones que se introducen a dpkg. Las opciones se deben " +"Es una lista de opciones que se introducen a &dpkg;. Las opciones se deben " "especificar usando la notación de lista y cada elemento de la lista se " "introduce a &dpkg; como un sólo argumento." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:614 +#: apt.conf.5.xml:667 msgid "" "This is a list of shell commands to run before/after invoking &dpkg;. Like " "<literal>options</literal> this must be specified in list notation. The " -"commands are invoked in order using <filename>/bin/sh</filename>, should any " +"commands are invoked in order using <filename>/bin/sh</filename>; should any " "fail APT will abort." msgstr "" "Es una lista de órdenes de la consola que se ejecutarán antes y/o después de " @@ -4666,13 +4878,20 @@ msgstr "" "sh</filename>, y APT finalizará en caso de fallo." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:621 +#: apt.conf.5.xml:674 +#, fuzzy +#| msgid "" +#| "This is a list of shell commands to run before invoking &dpkg;. Like " +#| "<literal>options</literal> this must be specified in list notation. The " +#| "commands are invoked in order using <filename>/bin/sh</filename>; should " +#| "any fail APT will abort. APT will pass to the commands on standard input " +#| "the filenames of all .deb files it is going to install, one per line." msgid "" -"This is a list of shell commands to run before invoking dpkg. Like " +"This is a list of shell commands to run before invoking &dpkg;. Like " "<literal>options</literal> this must be specified in list notation. The " -"commands are invoked in order using <filename>/bin/sh</filename>, should any " -"fail APT will abort. APT will pass to the commands on standard input the " -"filenames of all .deb files it is going to install, one per line." +"commands are invoked in order using <filename>/bin/sh</filename>; should any " +"fail APT will abort. APT will pass the filenames of all .deb files it is " +"going to install to the commands, one per line on standard input." msgstr "" "Es una lista de órdenes de la consola que se ejecutarán antes de invocar a " "&dpkg;. Como <literal>options</literal>, se debe especificar con notación de " @@ -4682,7 +4901,7 @@ msgstr "" "instalar, uno por línea." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:627 +#: apt.conf.5.xml:680 msgid "" "Version 2 of this protocol dumps more information, including the protocol " "version, the APT configuration space and the packages, files and versions " @@ -4698,18 +4917,18 @@ msgstr "" "literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:635 +#: apt.conf.5.xml:688 msgid "" -"APT chdirs to this directory before invoking dpkg, the default is <filename>/" -"</filename>." +"APT chdirs to this directory before invoking &dpkg;, the default is " +"<filename>/</filename>." msgstr "" -"APT cambia a este directorio antes de invocar a dpkg, el valor " +"APT cambia a este directorio antes de invocar a &dpkg;, el valor " "predeterminado es <filename>/</filename>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:640 +#: apt.conf.5.xml:693 msgid "" -"These options are passed to &dpkg-buildpackage; when compiling packages, the " +"These options are passed to &dpkg-buildpackage; when compiling packages; the " "default is to disable signing and produce all binaries." msgstr "" "Estas opciones se introducen a &dpkg-buildpackage; cuando compila paquetes, " @@ -4717,51 +4936,51 @@ msgstr "" "paquetes y a producir todos los binarios." #. type: Content of: <refentry><refsect1><refsect2><title> -#: apt.conf.5.xml:645 +#: apt.conf.5.xml:698 msgid "dpkg trigger usage (and related options)" msgstr "Uso del disparador de dpkg (y de las opciones relacionadas)" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:646 +#: apt.conf.5.xml:699 #, fuzzy #| msgid "" -#| "APT can call dpkg in a way so it can make aggressive use of triggers over " -#| "multiply calls of dpkg. Without further options dpkg will use triggers " -#| "only in between his own run. Activating these options can therefore " -#| "decrease the time needed to perform the install / upgrade. Note that it " -#| "is intended to activate these options per default in the future, but as " -#| "it changes the way APT calling dpkg drastically it needs a lot more " -#| "testing. <emphasis>These options are therefore currently experimental " -#| "and should not be used in productive environments.</emphasis> Also it " -#| "breaks the progress reporting so all frontends will currently stay around " -#| "half (or more) of the time in the 100% state while it actually configures " -#| "all packages." -msgid "" -"APT can call dpkg in a way so it can make aggressive use of triggers over " -"multiple calls of dpkg. Without further options dpkg will use triggers only " -"in between his own run. Activating these options can therefore decrease the " -"time needed to perform the install / upgrade. Note that it is intended to " -"activate these options per default in the future, but as it changes the way " -"APT calling dpkg drastically it needs a lot more testing. <emphasis>These " -"options are therefore currently experimental and should not be used in " -"productive environments.</emphasis> Also it breaks the progress reporting so " -"all frontends will currently stay around half (or more) of the time in the " -"100% state while it actually configures all packages." -msgstr "" -"APT puede invocar a dpkg de forma que pueda hacer un uso agresivo de los " -"disparadores mediante varias invocaciones a dpkg. Sin más opciones, dpkg " +#| "APT can call &dpkg; in a way so it can make aggressive use of triggers " +#| "over multiply calls of &dpkg;. Without further options &dpkg; will use " +#| "triggers only in between his own run. Activating these options can " +#| "therefore decrease the time needed to perform the install / upgrade. Note " +#| "that it is intended to activate these options per default in the future, " +#| "but as it changes the way APT calling &dpkg; drastically it needs a lot " +#| "more testing. <emphasis>These options are therefore currently " +#| "experimental and should not be used in production environments.</" +#| "emphasis> Also it breaks the progress reporting so all frontends will " +#| "currently stay around half (or more) of the time in the 100% state while " +#| "it actually configures all packages." +msgid "" +"APT can call &dpkg; in such a way as to let it make aggressive use of " +"triggers over multiple calls of &dpkg;. Without further options &dpkg; will " +"use triggers once each time it runs. Activating these options can therefore " +"decrease the time needed to perform the install or upgrade. Note that it is " +"intended to activate these options per default in the future, but as it " +"drastically changes the way APT calls &dpkg; it needs a lot more testing. " +"<emphasis>These options are therefore currently experimental and should not " +"be used in production environments.</emphasis> It also breaks progress " +"reporting such that all front-ends will currently stay around half (or more) " +"of the time in the 100% state while it actually configures all packages." +msgstr "" +"APT puede invocar a &dpkg; de forma que pueda hacer un uso agresivo de los " +"disparadores mediante varias invocaciones a &dpkg;. Sin más opciones, &dpkg; " "usará los disparadores sólo en su propia ejecución. Activar estas opciones " "puede reducir el tiempo necesario para realizar la instalación o la " "actualización. Tenga en cuenta que está orientado a que estas opciones se " "activen de forma predeterminada en un futuro, necesita muchas pruebas pero " -"la forma en que APT invoca a dpkg ha cambiado drásticamente. <emphasis>Estas " -"opciones actualmente son experimentales, y no se deberían usar en entornos " -"de producción.</emphasis> También rompe el informe del progreso ya que todas " -"las interfaces estarán alrededor de la mitad (o más) del tiempo en el 100% " -"mientras se están configurando todos los paquetes." +"la forma en que APT invoca a &dpkg; ha cambiado drásticamente. " +"<emphasis>Estas opciones actualmente son experimentales, y no se deberían " +"usar en entornos de producción.</emphasis> También rompe el informe del " +"progreso ya que todas las interfaces estarán alrededor de la mitad (o más) " +"del tiempo en el 100% mientras se están configurando todos los paquetes." #. type: Content of: <refentry><refsect1><refsect2><para><literallayout> -#: apt.conf.5.xml:661 +#: apt.conf.5.xml:714 #, no-wrap msgid "" "DPkg::NoTriggers \"true\";\n" @@ -4775,15 +4994,15 @@ msgstr "" "DPkg::TriggersPending \"true\";" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:655 +#: apt.conf.5.xml:708 msgid "" "Note that it is not guaranteed that APT will support these options or that " "these options will not cause (big) trouble in the future. If you have " "understand the current risks and problems with these options, but are brave " -"enough to help testing them create a new configuration file and test a " +"enough to help testing them, create a new configuration file and test a " "combination of options. Please report any bugs, problems and improvements " "you encounter and make sure to note which options you have used in your " -"reports. Asking dpkg for help could also be useful for debugging proposes, " +"reports. Asking &dpkg; for help could also be useful for debugging proposes, " "see e.g. <command>dpkg --audit</command>. A defensive option combination " "would be <placeholder type=\"literallayout\" id=\"0\"/>" msgstr "" @@ -4793,117 +5012,121 @@ msgstr "" "suficientemente valiente para ayudar a probarlas, cree un nuevo fichero de " "configuración y pruebe una combinación de las opciones. Por favor, informe " "de cualquier error, problema o mejora que encuentre y asegúrese de apuntar " -"en sus informes qué opciones ha usado. Pedir ayuda a dpkg también puede ser " -"útil por motivos de depuración, véase por ejemplo: <command>dpkg --audit</" -"command>. Una combinación de opciones defensivas sería <placeholder type=" -"\"literallayout\" id=\"0\"/>" +"en sus informes qué opciones ha usado. Pedir ayuda a &dpkg; también puede " +"ser útil por motivos de depuración, véase por ejemplo: <command>dpkg --" +"audit</command>. Una combinación de opciones defensivas sería <placeholder " +"type=\"literallayout\" id=\"0\"/>" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:668 +#: apt.conf.5.xml:721 msgid "" -"Add the no triggers flag to all dpkg calls (except the ConfigurePending " +"Add the no triggers flag to all &dpkg; calls (except the ConfigurePending " "call). See &dpkg; if you are interested in what this actually means. In " -"short: dpkg will not run the triggers when this flag is present unless it is " -"explicitly called to do so in an extra call. Note that this option exists " -"(undocumented) also in older apt versions with a slightly different meaning: " -"Previously these option only append --no-triggers to the configure calls to " -"dpkg - now apt will add these flag also to the unpack and remove calls." -msgstr "" -"Añade a todas las llamadas a dpkg la opción sin disparadores («no " +"short: &dpkg; will not run the triggers when this flag is present unless it " +"is explicitly called to do so in an extra call. Note that this option " +"exists (undocumented) also in older APT versions with a slightly different " +"meaning: Previously these option only append --no-triggers to the configure " +"calls to &dpkg; - now APT will also add this flag to the unpack and remove " +"calls." +msgstr "" +"Añade a todas las llamadas a &dpkg; la opción sin disparadores («no " "triggers»), excepto a la llamada a «ConfigurePending». Consulte &dpkg; si " -"está interesado en saber qué significa esto. De forma breve: dpkg no " +"está interesado en saber qué significa esto. De forma breve: &dpkg; no " "ejecutará los disparadores cuando está opción esté presente a menos que se " "ejecute explícitamente en una llamada adicional. Tenga en cuenta que esta " "opción también existe en versiones antiguas de apt (aunque sin documentar) " "con un significado diferente. Anteriormente sólo se añadía la opción «--no-" -"triggers» a las llamadas de la configuración para dpkg, ahora apt también " +"triggers» a las llamadas de la configuración para &dpkg;, ahora apt también " "añadirá esta opción a las llamadas de desempaquetado y borrado." #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:676 +#: apt.conf.5.xml:729 +#, fuzzy +#| msgid "" +#| "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " +#| "and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default " +#| "value and causes APT to configure all packages explicit. The " +#| "\"<literal>smart</literal>\" way is it to configure only packages which " +#| "need to be configured before another package can be unpacked (Pre-" +#| "Depends) and let the rest configure by &dpkg; with a call generated by " +#| "the next option. \"<literal>no</literal>\" on the other hand will not " +#| "configure anything and totally rely on &dpkg; for configuration (which " +#| "will at the moment fail if a Pre-Depends is encountered). Setting this " +#| "option to another than the all value will implicitly activate also the " +#| "next option per default as otherwise the system could end in an " +#| "unconfigured status which could be unbootable!" msgid "" "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " -"and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default " -"value and causes APT to configure all packages explicit. The " -"\"<literal>smart</literal>\" way is it to configure only packages which need " -"to be configured before another package can be unpacked (Pre-Depends) and " -"let the rest configure by dpkg with a call generated by the next option. " -"\"<literal>no</literal>\" on the other hand will not configure anything and " -"totally rely on dpkg for configuration (which will at the moment fail if a " -"Pre-Depends is encountered). Setting this option to another than the all " -"value will implicitly activate also the next option per default as otherwise " -"the system could end in an unconfigured status which could be unbootable!" +"and \"<literal>no</literal>\". The default value is \"<literal>all</literal>" +"\", which causes APT to configure all packages. The \"<literal>smart</" +"literal>\" way is to configure only packages which need to be configured " +"before another package can be unpacked (Pre-Depends), and let the rest be " +"configured by &dpkg; with a call generated by the ConfigurePending option " +"(see below). On the other hand, \"<literal>no</literal>\" will not configure " +"anything, and totally relies on &dpkg; for configuration (which at the " +"moment will fail if a Pre-Depends is encountered). Setting this option to " +"any value other than <literal>all</literal> will implicitly also activate " +"the next option by default, as otherwise the system could end in an " +"unconfigured and potentially unbootable state." msgstr "" "Los valores válidos son «<literal>all</literal>», «<literal>smart</" "literal>» y «<literal>no</literal>». «<literal>all</literal>» es el valor " "predeterminado y hace que APT configure todos los paquetes de forma " "explícita. El valor «<literal>smart</literal>» sólo configura los paquetes " "que necesiten ser configurados antes de que otro paquete se desempaquete " -"(pre-dependencia) y permite que dpkg configure los restantes con una llamada " -"generada por la siguiente opción. El valor «<literal>no</literal>» no " -"configurará nada y dependerá totalmente de dpkg para la configuración (que " -"fallará si se encuentra una pre-dependencia). Definir esta opción a otro " -"valor distinto a «all» activará implícitamente la siguiente opción de forma " -"predeterminada, ya que de otro modo el sistema podría terminar en un estado " -"mal configurado qué podría derivar en la imposibilidad de arrancar el " +"(pre-dependencia) y permite que &dpkg; configure los restantes con una " +"llamada generada por la siguiente opción. El valor «<literal>no</literal>» " +"no configurará nada y dependerá totalmente de &dpkg; para la configuración " +"(que fallará si se encuentra una pre-dependencia). Definir esta opción a " +"otro valor distinto a «all» activará implícitamente la siguiente opción de " +"forma predeterminada, ya que de otro modo el sistema podría terminar en un " +"estado mal configurado qué podría derivar en la imposibilidad de arrancar el " "sistema. " #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:687 -msgid "" -"If this option is set apt will call <command>dpkg --configure --pending</" -"command> to let dpkg handle all required configurations and triggers. This " -"option is activated automatic per default if the previous option is not set " -"to <literal>all</literal>, but deactivating could be useful if you want to " -"run APT multiple times in a row - e.g. in an installer. In these sceneries " -"you could deactivate this option in all but the last run." +#: apt.conf.5.xml:744 +#, fuzzy +#| msgid "" +#| "If this option is set, APT will call <command>dpkg --configure --pending</" +#| "command> to let &dpkg; handle all required configurations and triggers. " +#| "This option is activated automatically per default if the previous option " +#| "is not set to <literal>all</literal>, but deactivating it could be useful " +#| "if you want to run APT multiple times in a row - e.g. in an installer. In " +#| "these sceneries you could deactivate this option in all but the last run." +msgid "" +"If this option is set APT will call <command>dpkg --configure --pending</" +"command> to let &dpkg; handle all required configurations and triggers. This " +"option is activated automatically per default if the previous option is not " +"set to <literal>all</literal>, but deactivating it could be useful if you " +"want to run APT multiple times in a row - e.g. in an installer. In these " +"sceneries you could deactivate this option in all but the last run." msgstr "" "Si define esta opción, apt ejecutará <command>dpkg --configure --pending</" -"command> para permitir a dpkg manejar todas las configuraciones necesarias y " -"todos los disparadores. Esta opción se activa automáticamente de forma " +"command> para permitir a &dpkg; manejar todas las configuraciones necesarias " +"y todos los disparadores. Esta opción se activa automáticamente de forma " "predeterminada si la opción anterior no está definida como <literal>all</" "literal>, pero desactivarla podría ser útil si se quiere ejecutar APT varias " "veces seguidas, por ejemplo: en un instalador. En estas situaciones podría " "desactivar esta opción en todas las ejecuciones menos la última." #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:694 +#: apt.conf.5.xml:751 msgid "" -"Useful for <literal>smart</literal> configuration as a package which has " -"pending triggers is not considered as <literal>installed</literal> and dpkg " -"treats them as <literal>unpacked</literal> currently which is a dealbreaker " -"for Pre-Dependencies (see debbugs #526774). Note that this will process all " -"triggers, not only the triggers needed to configure this package." +"Useful for the <literal>smart</literal> configuration as a package which has " +"pending triggers is not considered as <literal>installed</literal>, and " +"&dpkg; treats them as <literal>unpacked</literal> currently which is a " +"showstopper for Pre-Dependencies (see debbugs #526774). Note that this will " +"process all triggers, not only the triggers needed to configure this package." msgstr "" "Útil para una configuración <literal>smart</literal> en la que un paquete " "que tiene disparadores pendientes no se considera como <literal>instalado</" -"literal> y que dpkg lo trata como <literal>desempaquetado</literal>, lo cual " -"rompe el sistema de pre-dependencias (véase debbugs #526774). Tenga en " +"literal> y que &dpkg; lo trata como <literal>desempaquetado</literal>, lo " +"cual rompe el sistema de pre-dependencias (véase debbugs #526774). Tenga en " "cuenta que esto procesará todos los disparadores, no sólo los disparadores " "necesarios para configurar este paquete." -#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:700 -msgid "" -"As the configuration can be deferred to be done at the end by dpkg it can be " -"tried to order the unpack series only by critical needs, e.g. by Pre-" -"Depends. Default is true and therefore the \"old\" method of ordering in " -"various steps by everything. While both method were present in earlier APT " -"versions the <literal>OrderCritical</literal> method was unused, so this " -"method is very experimental and needs further improvements before becoming " -"really useful." -msgstr "" -"Ya que la configuración se puede aplazar para que dpkg la haga al final se " -"puede intentar ordenar las series de desempaquetado por necesidades " -"críticas, por ejemplo, mediante pre-dependencias. De forma predeterminada, " -"es «true» y por tanto se usa el método «antiguo» de ordenación en varios " -"pasos para todo. Mientras ambos métodos estén presentes en versiones " -"anteriores de APT, el método <literal>OrderCritical</literal> no se usará, " -"ya que este método es experimental y necesita más mejoras antes de llegar a " -"ser realmente útil." - #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:715 +#: apt.conf.5.xml:764 #, no-wrap msgid "" "OrderList::Score {\n" @@ -4921,17 +5144,17 @@ msgstr "" "};" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:708 -msgid "" -"Essential packages (and there dependencies) should be configured immediately " -"after unpacking. It will be a good idea to do this quite early in the " -"upgrade process as these these configure calls require currently also " -"<literal>DPkg::TriggersPending</literal> which will run quite a few triggers " -"(which maybe not needed). Essentials get per default a high score but the " -"immediate flag is relatively low (a package which has a Pre-Depends is " -"higher rated). These option and the others in the same group can be used to " -"change the scoring. The following example shows the settings with there " -"default values. <placeholder type=\"literallayout\" id=\"0\"/>" +#: apt.conf.5.xml:757 +msgid "" +"Essential packages (and their dependencies) should be configured immediately " +"after unpacking. It is a good idea to do this quite early in the upgrade " +"process as these configure calls also currently require <literal>DPkg::" +"TriggersPending</literal> which will run quite a few triggers (which may not " +"be needed). Essentials get per default a high score but the immediate flag " +"is relatively low (a package which has a Pre-Depends is rated higher). " +"These option and the others in the same group can be used to change the " +"scoring. The following example shows the settings with their default " +"values. <placeholder type=\"literallayout\" id=\"0\"/>" msgstr "" "Los paquetes esenciales (y sus dependencias) se deberían configurar " "inmediatamente después de desempaquetarlos. Es una buena idea hacerlo lo más " @@ -4946,17 +5169,17 @@ msgstr "" "\"literallayout\" id=\"0\"/>" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:728 +#: apt.conf.5.xml:777 msgid "Periodic and Archives options" msgstr "Las opciones «Periodic» y «Archives»" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:729 +#: apt.conf.5.xml:778 msgid "" "<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups " -"of options configure behavior of apt periodic updates, which is done by " -"<literal>/etc/cron.daily/apt</literal> script. See header of this script for " -"the brief documentation of these options." +"of options configure behavior of apt periodic updates, which is done by the " +"<literal>/etc/cron.daily/apt</literal> script. See the top of this script " +"for the brief documentation of these options." msgstr "" "Los grupos de opciones <literal>APT::Periodic</literal> y <literal>APT::" "Archives</literal> configuran el comportamiento de las actualizaciones " @@ -4965,12 +5188,12 @@ msgstr "" "documentación de estas opciones." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:737 +#: apt.conf.5.xml:786 msgid "Debug options" msgstr "Opciones de depuración" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:739 +#: apt.conf.5.xml:788 msgid "" "Enabling options in the <literal>Debug::</literal> section will cause " "debugging information to be sent to the standard error stream of the program " @@ -4987,7 +5210,7 @@ msgstr "" "para un usuario normal, aunque unas cuantas sí son:" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:750 +#: apt.conf.5.xml:799 msgid "" "<literal>Debug::pkgProblemResolver</literal> enables output about the " "decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</" @@ -4998,7 +5221,7 @@ msgstr "" "purge</literal>." #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:758 +#: apt.conf.5.xml:807 msgid "" "<literal>Debug::NoLocking</literal> disables all file locking. This can be " "used to run some operations (for instance, <literal>apt-get -s install</" @@ -5009,7 +5232,7 @@ msgstr "" "<literal>apt-get -s install</literal>) como un usuario normal." #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:767 +#: apt.conf.5.xml:816 msgid "" "<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each " "time that <literal>apt</literal> invokes &dpkg;." @@ -5021,7 +5244,7 @@ msgstr "" #. motivating example, except I haven't a clue why you'd want #. to do this. #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:775 +#: apt.conf.5.xml:824 msgid "" "<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data " "in CD-ROM IDs." @@ -5030,14 +5253,14 @@ msgstr "" "statfs en los identificadores de los CD-ROM." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:785 +#: apt.conf.5.xml:834 msgid "A full list of debugging options to apt follows." msgstr "" "A continuación, se muestra la lista completa de las opciones de depuración " "de apt." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:794 +#: apt.conf.5.xml:843 msgid "" "Print information related to accessing <literal>cdrom://</literal> sources." msgstr "" @@ -5045,26 +5268,26 @@ msgstr "" "<literal>cdrom://</literal>" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:805 +#: apt.conf.5.xml:854 msgid "Print information related to downloading packages using FTP." msgstr "" "Muestra la información relacionada con la descarga de paquetes mediante FTP." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:816 +#: apt.conf.5.xml:865 msgid "Print information related to downloading packages using HTTP." msgstr "" "Muestra la información relacionada con la descarga de paquetes mediante HTTP." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:827 +#: apt.conf.5.xml:876 msgid "Print information related to downloading packages using HTTPS." msgstr "" "Muestra la información relacionada con la descarga de paquetes mediante " "HTTPS." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:838 +#: apt.conf.5.xml:887 msgid "" "Print information related to verifying cryptographic signatures using " "<literal>gpg</literal>." @@ -5073,7 +5296,7 @@ msgstr "" "criptográficas mediante <literal>gpg</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:849 +#: apt.conf.5.xml:898 msgid "" "Output information about the process of accessing collections of packages " "stored on CD-ROMs." @@ -5082,14 +5305,14 @@ msgstr "" "paquetes almacenadas en CD-ROM." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:859 +#: apt.conf.5.xml:908 msgid "Describes the process of resolving build-dependencies in &apt-get;." msgstr "" "Describe el proceso de resolución de dependencias de compilación en &apt-" "get;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:869 +#: apt.conf.5.xml:918 msgid "" "Output each cryptographic hash that is generated by the <literal>apt</" "literal> libraries." @@ -5098,7 +5321,7 @@ msgstr "" "<literal>apt</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:879 +#: apt.conf.5.xml:928 msgid "" "Do not include information from <literal>statfs</literal>, namely the number " "of used and free blocks on the CD-ROM filesystem, when generating an ID for " @@ -5109,7 +5332,7 @@ msgstr "" "identificador de un CD-ROM." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:890 +#: apt.conf.5.xml:939 msgid "" "Disable all file locking. For instance, this will allow two instances of " "<quote><literal>apt-get update</literal></quote> to run at the same time." @@ -5119,14 +5342,14 @@ msgstr "" "a la vez." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:902 +#: apt.conf.5.xml:951 msgid "Log when items are added to or removed from the global download queue." msgstr "" "Registra los elementos que se añaden o se borran de la cola de descarga " "global." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:912 +#: apt.conf.5.xml:961 msgid "" "Output status messages and errors related to verifying checksums and " "cryptographic signatures of downloaded files." @@ -5136,7 +5359,7 @@ msgstr "" "ficheros descargados." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:922 +#: apt.conf.5.xml:971 msgid "" "Output information about downloading and applying package index list diffs, " "and errors relating to package index list diffs." @@ -5145,7 +5368,7 @@ msgstr "" "lista de índices de paquetes, y los errores relacionados con éstos." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:934 +#: apt.conf.5.xml:983 msgid "" "Output information related to patching apt package lists when downloading " "index diffs instead of full indices." @@ -5155,7 +5378,7 @@ msgstr "" "índices completos." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:945 +#: apt.conf.5.xml:994 msgid "" "Log all interactions with the sub-processes that actually perform downloads." msgstr "" @@ -5163,7 +5386,7 @@ msgstr "" "descargas." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:956 +#: apt.conf.5.xml:1005 msgid "" "Log events related to the automatically-installed status of packages and to " "the removal of unused packages." @@ -5172,7 +5395,7 @@ msgstr "" "de los paquetes y con la eliminación de los paquetes sin usar." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:966 +#: apt.conf.5.xml:1015 msgid "" "Generate debug messages describing which packages are being automatically " "installed to resolve dependencies. This corresponds to the initial auto-" @@ -5187,20 +5410,21 @@ msgstr "" "<literal>apt</literal>. Véase <literal>Debug::pkgProblemResolver</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:980 +#: apt.conf.5.xml:1029 msgid "" -"Generate debug messages describing which package is marked as keep/install/" +"Generate debug messages describing which packages are marked as keep/install/" "remove while the ProblemResolver does his work. Each addition or deletion " -"may trigger additional actions; they are shown indented two additional space " -"under the original entry. The format for each line is <literal>MarkKeep</" -"literal>, <literal>MarkDelete</literal> or <literal>MarkInstall</literal> " -"followed by <literal>package-name <a.b.c -> d.e.f | x.y.z> (section)" -"</literal> where <literal>a.b.c</literal> is the current version of the " -"package, <literal>d.e.f</literal> is the version considered for installation " -"and <literal>x.y.z</literal> is a newer version, but not considered for " -"installation (because of a low pin score). The later two can be omitted if " -"there is none or if it is the same version as the installed. " -"<literal>section</literal> is the name of the section the package appears in." +"may trigger additional actions; they are shown indented two additional " +"spaces under the original entry. The format for each line is " +"<literal>MarkKeep</literal>, <literal>MarkDelete</literal> or " +"<literal>MarkInstall</literal> followed by <literal>package-name <a.b.c -" +"> d.e.f | x.y.z> (section)</literal> where <literal>a.b.c</literal> is " +"the current version of the package, <literal>d.e.f</literal> is the version " +"considered for installation and <literal>x.y.z</literal> is a newer version, " +"but not considered for installation (because of a low pin score). The later " +"two can be omitted if there is none or if it is the same as the installed " +"version. <literal>section</literal> is the name of the section the package " +"appears in." msgstr "" "Genera los mensajes de depuración que describen qué paquete se marcará como " "mantener/instalar/borrar mientras el solucionador de problemas " @@ -5217,14 +5441,7 @@ msgstr "" "la sección en la que aparece el paquete." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1002 -msgid "Dump the default configuration to standard error on startup." -msgstr "" -"Vuelca la configuración predeterminada a la salida estándar durante al " -"iniciarse." - -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1012 +#: apt.conf.5.xml:1050 msgid "" "When invoking &dpkg;, output the precise command line with which it is being " "invoked, with arguments separated by a single space character." @@ -5233,7 +5450,7 @@ msgstr "" "invocó, con los argumentos separados por un espacio." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1023 +#: apt.conf.5.xml:1061 msgid "" "Output all the data received from &dpkg; on the status file descriptor and " "any errors encountered while parsing it." @@ -5242,7 +5459,7 @@ msgstr "" "estado y cualquier error encontrado durante el análisis." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1034 +#: apt.conf.5.xml:1072 msgid "" "Generate a trace of the algorithm that decides the order in which " "<literal>apt</literal> should pass packages to &dpkg;." @@ -5251,7 +5468,7 @@ msgstr "" "literal> debería entregar los paquetes a &dpkg;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1046 +#: apt.conf.5.xml:1084 msgid "" "Output status messages tracing the steps performed when invoking &dpkg;." msgstr "" @@ -5259,12 +5476,12 @@ msgstr "" "&dpkg;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1057 +#: apt.conf.5.xml:1095 msgid "Output the priority of each package list on startup." msgstr "Muestra la prioridad de cada lista de paquetes al iniciarse." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1067 +#: apt.conf.5.xml:1105 msgid "" "Trace the execution of the dependency resolver (this applies only to what " "happens when a complex dependency problem is encountered)." @@ -5273,7 +5490,7 @@ msgstr "" "lo que ocurre cuando se encuentra un problema de dependencias complejo)." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1078 +#: apt.conf.5.xml:1116 msgid "" "Display a list of all installed packages with their calculated score used by " "the pkgProblemResolver. The description of the package is the same as " @@ -5284,7 +5501,7 @@ msgstr "" "misma que la descrita en <literal>Debug::pkgDepCache::Marker</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1090 +#: apt.conf.5.xml:1128 msgid "" "Print information about the vendors read from <filename>/etc/apt/vendors." "list</filename>." @@ -5293,13 +5510,13 @@ msgstr "" "vendors.list</filename>." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:1112 apt_preferences.5.xml:545 sources.list.5.xml:211 +#: apt.conf.5.xml:1150 apt_preferences.5.xml:545 sources.list.5.xml:211 #: apt-ftparchive.1.xml:596 msgid "Examples" msgstr "Ejemplos" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:1113 +#: apt.conf.5.xml:1151 msgid "" "&configureindex; is a configuration file showing example values for all " "possible options." @@ -5309,7 +5526,7 @@ msgstr "" #. ? reading apt.conf #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:1125 +#: apt.conf.5.xml:1163 msgid "&apt-cache;, &apt-config;, &apt-preferences;." msgstr "&apt-cache;, &apt-config;, &apt-preferences;." @@ -5426,7 +5643,7 @@ msgid "" "literal>\" as filename extension and only contain alphanumeric, hyphen (-), " "underscore (_) and period (.) characters. Otherwise APT will print a notice " "that it has ignored a file, unless that file matches a pattern in the " -"<literal>Dir::Ignore-Files-Silently</literal> configuration list - in this " +"<literal>Dir::Ignore-Files-Silently</literal> configuration list - in which " "case it will be silently ignored." msgstr "" "Tenga en cuenta los ficheros en el directorio <filename>/etc/apt/preferences." @@ -6706,40 +6923,25 @@ msgid "Package resource list for APT" msgstr "Lista de los repositorios de paquetes para APT" #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:37 +#: sources.list.5.xml:38 msgid "" -"The package resource list is used to locate archives of the package " -"distribution system in use on the system. At this time, this manual page " -"documents only the packaging system used by the Debian system. This control " -"file is <filename>/etc/apt/sources.list</filename>." +"The source list <filename>/etc/apt/sources.list</filename> is designed to " +"support any number of active sources and a variety of source media. The file " +"lists one source per line, with the most preferred source listed first. The " +"information available from the configured sources is acquired by " +"<command>apt-get update</command> (or by an equivalent command from another " +"APT front-end)." msgstr "" -"La lista de los repositorios de paquetes se usa para ubicar los archivos de " -"Debian del sistema de distribución de paquetes en uso en el sistema. A día " -"de hoy, esta página del manual documenta sólo el sistema de paquetes que usa " -"Debian. Este fichero de control está ubicado en <filename>/etc/apt/sources." -"list</filename>" #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:42 -msgid "" -"The source list is designed to support any number of active sources and a " -"variety of source media. The file lists one source per line, with the most " -"preferred source listed first. The format of each line is: <literal>type uri " -"args</literal> The first item, <literal>type</literal> determines the format " -"for <literal>args</literal>. <literal>uri</literal> is a Universal Resource " -"Identifier (URI), which is a superset of the more specific and well-known " -"Universal Resource Locator, or URL. The rest of the line can be marked as a " -"comment by using a #." -msgstr "" -"La lista de los repositorios está diseñada para gestionar cualquier número " -"de fuentes y distintos tipos de procedencias. El fichero lista una fuente " -"por línea, con la fuente de mayor prioridad en la primera línea. El formato " -"de cada línea es: <literal>tipo uri argumentos</literal>. El primer " -"elemento, <literal>tipo</literal>, determina el formato de " -"<literal>argumentos</literal>. <literal>uri</literal> es «Universal Resource " -"Identifier» (Identificador Universal de Recursos), un superconjunto de la " -"más específica y bien conocida «Universal Resource Locator» (URL). Se puede " -"marcar el resto de la línea como comentario usando #." +#: sources.list.5.xml:45 +msgid "" +"Each line specifying a source starts with type (e.g. <literal>deb-src</" +"literal>) followed by options and arguments for this type. Individual " +"entries cannot be continued onto a following line. Empty lines are ignored, " +"and a <literal>#</literal> character anywhere on a line marks the remainder " +"of that line as a comment." +msgstr "" #. type: Content of: <refentry><refsect1><title> #: sources.list.5.xml:53 @@ -6764,7 +6966,7 @@ msgid "" "digits (0-9), underscore (_), hyphen (-) and period (.) characters. " "Otherwise APT will print a notice that it has ignored a file, unless that " "file matches a pattern in the <literal>Dir::Ignore-Files-Silently</literal> " -"configuration list - in this case it will be silently ignored." +"configuration list - in which case it will be silently ignored." msgstr "" "El directorio <filename>/etc/apt/sources.list.d</filename> ofrece una manera " "de añadir entradas de «sources.list» en ficheros separados. El formato es " @@ -6782,7 +6984,7 @@ msgstr "Los tipos «deb» y «deb-src»" #: sources.list.5.xml:66 #, fuzzy #| msgid "" -#| "The <literal>deb</literal> type describes a typical two-level Debian " +#| "The <literal>deb</literal> type references a typical two-level Debian " #| "archive, <filename>distribution/component</filename>. Typically, " #| "<literal>distribution</literal> is generally one of <literal>stable</" #| "literal> <literal>unstable</literal> or <literal>testing</literal> while " @@ -6792,16 +6994,16 @@ msgstr "Los tipos «deb» y «deb-src»" #| "code in the same form as the <literal>deb</literal> type. A <literal>deb-" #| "src</literal> line is required to fetch source indexes." msgid "" -"The <literal>deb</literal> type describes a typical two-level Debian " -"archive, <filename>distribution/component</filename>. Typically, " -"<literal>distribution</literal> is generally an archivename like " +"The <literal>deb</literal> type references a typical two-level Debian " +"archive, <filename>distribution/component</filename>. The " +"<literal>distribution</literal> is generally an archive name like " "<literal>stable</literal> or <literal>testing</literal> or a codename like " "<literal>&stable-codename;</literal> or <literal>&testing-codename;</" -"literal> while component is one of <literal>main</literal> <literal>contrib</" -"literal> or <literal>non-free</literal>. The <literal>deb-src</literal> type " -"describes a debian distribution's source code in the same form as the " -"<literal>deb</literal> type. A <literal>deb-src</literal> line is required " -"to fetch source indexes." +"literal> while component is one of <literal>main</literal>, " +"<literal>contrib</literal> or <literal>non-free</literal>. The <literal>deb-" +"src</literal> type references a Debian distribution's source code in the " +"same form as the <literal>deb</literal> type. A <literal>deb-src</literal> " +"line is required to fetch source indexes." msgstr "" "El tipo <literal>deb</literal> hace referencia a un típico archivo de Debian " "de dos niveles, <filename>distribución/componente</filename>. Normalmente, " @@ -6837,33 +7039,42 @@ msgid "" "Debian distribution, from which APT will find the information it needs. " "<literal>distribution</literal> can specify an exact path, in which case the " "components must be omitted and <literal>distribution</literal> must end with " -"a slash (/). This is useful for when the case only a particular sub-section " -"of the archive denoted by the URI is of interest. If <literal>distribution</" -"literal> does not specify an exact path, at least one <literal>component</" -"literal> must be present." +"a slash (<literal>/</literal>). This is useful for the case when only a " +"particular sub-section of the archive denoted by the URI is of interest. If " +"<literal>distribution</literal> does not specify an exact path, at least one " +"<literal>component</literal> must be present." msgstr "" "La URI para el tipo <literal>deb</literal> debe especificar la base de la " "distribución de Debian desde la que APT encontrará la información que " "necesita. <literal>distribución</literal> puede definir una ruta exacta, en " "cuyo caso debe omitir los componentes y <literal>distribución</literal> debe " -"finalizar con una barra (/). Esto es útil cuando sólo se quiere una sub-" -"sección del archivo señalado por la URI. Al menos uno de los " +"finalizar con una barra (<literal>/</literal>). Esto es útil cuando sólo se " +"quiere una sub-sección del archivo señalado por la URI. Al menos uno de los " "<literal>componentes</literal> debe estar presente si <literal>distribución</" "literal> no define una ruta exacta." #. type: Content of: <refentry><refsect1><para> #: sources.list.5.xml:92 +#, fuzzy +#| msgid "" +#| "<literal>distribution</literal> may also contain a variable, <literal>" +#| "$(ARCH)</literal> which expands to the Debian architecture (i386, amd64, " +#| "powerpc, ...) used on the system. This permits architecture-independent " +#| "<filename>sources.list</filename> files to be used. In general this is " +#| "only of interest when specifying an exact path, <literal>APT</literal> " +#| "will automatically generate a URI with the current architecture otherwise." msgid "" "<literal>distribution</literal> may also contain a variable, <literal>$(ARCH)" -"</literal> which expands to the Debian architecture (i386, m68k, " -"powerpc, ...) used on the system. This permits architecture-independent " -"<filename>sources.list</filename> files to be used. In general this is only " -"of interest when specifying an exact path, <literal>APT</literal> will " -"automatically generate a URI with the current architecture otherwise." +"</literal> which expands to the Debian architecture (such as <literal>amd64</" +"literal> or <literal>armel</literal>) used on the system. This permits " +"architecture-independent <filename>sources.list</filename> files to be used. " +"In general this is only of interest when specifying an exact path, " +"<literal>APT</literal> will automatically generate a URI with the current " +"architecture otherwise." msgstr "" "<literal>distribución</literal> puede contener una variable, <literal>$(ARCH)" "</literal>, que se expandirá a la arquitectura de Debian usada en el sistema " -"(i386, m68k, powerpc, ...). Esto permite que los ficheros <filename>sources." +"(i386, amd64, powerpc, ...). Esto permite que los ficheros <filename>sources." "list</filename> sean independientes de la arquitectura. En general, esta " "característica sólo es de interés si se especifica una ruta completa, de lo " "contrario <literal>APT</literal> generará automáticamente la URI con la " @@ -6898,12 +7109,12 @@ msgstr "" #. type: Content of: <refentry><refsect1><para> #: sources.list.5.xml:112 msgid "" -"<literal>options</literal> is always optional and needs to be surounded by " +"<literal>options</literal> is always optional and needs to be surrounded by " "square brackets. It can consist of multiple settings in the form " "<literal><replaceable>setting</replaceable>=<replaceable>value</" "replaceable></literal>. Multiple settings are separated by spaces. The " -"following settings are supported by APT, note though that unsupported " -"settings will be ignored silently:" +"following settings are supported by APT (note however that unsupported " +"settings will be ignored silently):" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> @@ -6911,7 +7122,7 @@ msgstr "" msgid "" "<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</" "replaceable>,…</literal> can be used to specify for which architectures " -"packages information should be downloaded. If this option is not set all " +"information should be downloaded. If this option is not set all " "architectures defined by the <literal>APT::Architectures</literal> option " "will be downloaded." msgstr "" @@ -7009,13 +7220,23 @@ msgstr "" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #: sources.list.5.xml:172 +#, fuzzy +#| msgid "" +#| "The ftp scheme specifies an FTP server for the archive. APT's FTP " +#| "behavior is highly configurable; for more information see the &apt-conf; " +#| "manual page. Please note that a ftp proxy can be specified by using the " +#| "<envar>ftp_proxy</envar> environment variable. It is possible to specify " +#| "a http proxy (http proxy servers often understand ftp urls) using this " +#| "method and ONLY this method. ftp proxies using http specified in the " +#| "configuration file will be ignored." msgid "" "The ftp scheme specifies an FTP server for the archive. APT's FTP behavior " "is highly configurable; for more information see the &apt-conf; manual page. " -"Please note that a ftp proxy can be specified by using the <envar>ftp_proxy</" -"envar> environment variable. It is possible to specify a http proxy (http " -"proxy servers often understand ftp urls) using this method and ONLY this " -"method. ftp proxies using http specified in the configuration file will be " +"Please note that an FTP proxy can be specified by using the " +"<envar>ftp_proxy</envar> environment variable. It is possible to specify an " +"HTTP proxy (HTTP proxy servers often understand FTP URLs) using this " +"environment variable and <emphasis>ONLY</emphasis> this environment " +"variable. Proxies using HTTP specified in the configuration file will be " "ignored." msgstr "" "El esquema «ftp» especifica un servidor FTP como archivo. El comportamiento " @@ -7027,24 +7248,37 @@ msgstr "" "ignorarán proxies ftp definidos en el fichero de configuración que usen http." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: sources.list.5.xml:183 +#: sources.list.5.xml:184 +#, fuzzy +#| msgid "" +#| "The copy scheme is identical to the file scheme except that packages are " +#| "copied into the cache directory instead of used directly at their " +#| "location. This is useful for people using a zip disk to copy files " +#| "around with APT." msgid "" "The copy scheme is identical to the file scheme except that packages are " "copied into the cache directory instead of used directly at their location. " -"This is useful for people using a zip disk to copy files around with APT." +"This is useful for people using removable media to copy files around with " +"APT." msgstr "" "El esquema «copy» es idéntico a «file», pero los paquetes se copian al " "directorio almacén en vez de usarlos directamente en su ubicación original. " "Esto es útil para gente que use discos zip con APT." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: sources.list.5.xml:190 +#: sources.list.5.xml:191 +#, fuzzy +#| msgid "" +#| "The rsh/ssh method invokes rsh/ssh to connect to a remote host as a given " +#| "user and access the files. It is a good idea to do prior arrangements " +#| "with RSA keys or rhosts. Access to files on the remote uses standard " +#| "<command>find</command> and <command>dd</command> commands to perform the " +#| "file transfers from the remote." msgid "" -"The rsh/ssh method invokes rsh/ssh to connect to a remote host as a given " -"user and access the files. It is a good idea to do prior arrangements with " -"RSA keys or rhosts. Access to files on the remote uses standard " -"<command>find</command> and <command>dd</command> commands to perform the " -"file transfers from the remote." +"The rsh/ssh method invokes RSH/SSH to connect to a remote host and access " +"the files as a given user. Prior configuration of rhosts or RSA keys is " +"recommended. The standard <command>find</command> and <command>dd</command> " +"commands are used to perform the file transfers from the remote host." msgstr "" "El método «rsh/ssh» invoca «rsh/ssh» para establecer conexiones con los " "servidores remotos como un usuario dado, y acceder a los ficheros. Es " @@ -7072,12 +7306,12 @@ msgstr "Otros tipos de URI reconocidos." #| "<citerefentry> <refentrytitle><filename>apt-transport-debtorrent</" #| "filename></refentrytitle> <manvolnum>1</manvolnum></citerefentry>." msgid "" -"APT can be extended with more methods shipped in other optional packages " -"which should follow the nameing scheme <package>apt-transport-" -"<replaceable>method</replaceable></package>. The APT team e.g. maintains " -"also the <package>apt-transport-https</package> package which provides " -"access methods for https-URIs with features similar to the http method, but " -"other methods for using e.g. debtorrent are also available, see &apt-" +"APT can be extended with more methods shipped in other optional packages, " +"which should follow the naming scheme <package>apt-transport-" +"<replaceable>method</replaceable></package>. For instance, the APT team " +"also maintains the package <package>apt-transport-https</package>, which " +"provides access methods for HTTPS URIs with features similar to the http " +"method. Methods for using e.g. debtorrent are also available - see &apt-" "transport-debtorrent;." msgstr "" "Puede extender APT con más métodos, proporcionados en otros paquetes " @@ -7321,7 +7555,10 @@ msgstr "" #. type: Content of: <refentry><refsect1><para> #: apt-sortpkgs.1.xml:45 -msgid "All output is sent to stdout, the input must be a seekable file." +#, fuzzy +#| msgid "All output is sent to stdout, the input must be a seekable file." +msgid "" +"All output is sent to standard output; the input must be a seekable file." msgstr "" "Toda la salida se muestra por la salida estándar, la entrada debe ser un " "fichero ubicable." @@ -9972,6 +10209,126 @@ msgid "Which will use the already fetched archives on the disc." msgstr "Ésto usará los archivos del disco previamente obtenidos." #~ msgid "" +#~ "As the configuration can be deferred to be done at the end by &dpkg; it " +#~ "can be tried to order the unpack series only by critical needs, e.g. by " +#~ "Pre-Depends. Default is true and therefore the \"old\" method of ordering " +#~ "in various steps by everything. While both method were present in earlier " +#~ "APT versions the <literal>OrderCritical</literal> method was unused, so " +#~ "this method is very experimental and needs further improvements before " +#~ "becoming really useful." +#~ msgstr "" +#~ "Ya que la configuración se puede aplazar para que &dpkg; la haga al final " +#~ "se puede intentar ordenar las series de desempaquetado por necesidades " +#~ "críticas, por ejemplo, mediante pre-dependencias. De forma " +#~ "predeterminada, es «true» y por tanto se usa el método «antiguo» de " +#~ "ordenación en varios pasos para todo. Mientras ambos métodos estén " +#~ "presentes en versiones anteriores de APT, el método " +#~ "<literal>OrderCritical</literal> no se usará, ya que este método es " +#~ "experimental y necesita más mejoras antes de llegar a ser realmente útil." + +#~ msgid "Dump the default configuration to standard error on startup." +#~ msgstr "" +#~ "Vuelca la configuración predeterminada a la salida estándar durante al " +#~ "iniciarse." + +#~ msgid "" +#~ "Defaults to on which will cause APT to install essential and important " +#~ "packages as fast as possible in the install/upgrade operation. This is " +#~ "done to limit the effect of a failing &dpkg; call: If this option is " +#~ "disabled APT does treat an important package in the same way as an extra " +#~ "package: Between the unpacking of the important package A and his " +#~ "configuration can then be many other unpack or configuration calls, e.g. " +#~ "for package B which has no relation to A, but causes the dpkg call to " +#~ "fail (e.g. because maintainer script of package B generates an error) " +#~ "which results in a system state in which package A is unpacked but " +#~ "unconfigured - each package depending on A is now no longer guaranteed to " +#~ "work as their dependency on A is not longer satisfied. The immediate " +#~ "configuration marker is also applied to all dependencies which can " +#~ "generate a problem if the dependencies e.g. form a circle as a dependency " +#~ "with the immediate flag is comparable with a Pre-Dependency. So in theory " +#~ "it is possible that APT encounters a situation in which it is unable to " +#~ "perform immediate configuration, errors out and refers to this option so " +#~ "the user can deactivate the immediate configuration temporarily to be " +#~ "able to perform an install/upgrade again. Note the use of the word " +#~ "\"theory\" here as this problem was only encountered by now in real world " +#~ "a few times in non-stable distribution versions and was caused by wrong " +#~ "dependencies of the package in question or by a system in an already " +#~ "broken state, so you should not blindly disable this option as the " +#~ "mentioned scenario above is not the only problem immediate configuration " +#~ "can help to prevent in the first place. Before a big operation like " +#~ "<literal>dist-upgrade</literal> is run with this option disabled it " +#~ "should be tried to explicitly <literal>install</literal> the package APT " +#~ "is unable to configure immediately, but please make sure to report your " +#~ "problem also to your distribution and to the APT team with the buglink " +#~ "below so they can work on improving or correcting the upgrade process." +#~ msgstr "" +#~ "Activo de forma predeterminada, hará que APT instale los paquetes " +#~ "esenciales e importantes tan rápido como le sea posible al instalar y/o " +#~ "actualizar. Esto se hace para limitar el efecto de un fallo en la " +#~ "ejecución de &dpkg;. Si esta opción está desactivada, APT trata los " +#~ "paquetes importantes del mismo modo que un paquete adicional: entre " +#~ "desempaquetar un paquete importante A y su configuración puede haber " +#~ "muchos otros desempaquetados y configuraciones. Por ejemplo, el paquete B " +#~ "que no tiene relación con A, pero que hace que la ejecución de dpkg falle " +#~ "(ya sea porque el script del mantenedor del paquete B genera un error) " +#~ "generará un estado del sistema en el que el paquete A está desempaquetado " +#~ "pero no configurado; no se garantiza el funcionamiento de cada paquete " +#~ "que depende de A ya que su dependencia con A no está satisfecha. El " +#~ "marcador de configuración inmediata se aplicará a todas las dependencias " +#~ "que puedan generar un problema si las dependencias, por ejemplo, forman " +#~ "un círculo vicioso como dependencia con la marca de configuración " +#~ "inmediata, lo cual lo califica casi como Pre-Dependencia. Así, en teoría " +#~ "es posible que APT encuentre una situación en la que es incapaz de llevar " +#~ "a cabo una configuración inmediata, devuelva un error y mencione esta " +#~ "opción para que así el usuario pueda desactivar la configuración " +#~ "inmediata temporalmente para llevar a cabo una vez más la instalación y/o " +#~ "actualización. Observe el uso de la expresión «en teoría», ya que esta " +#~ "situación sólo se ha visto algunas veces con versiones de distribución no " +#~ "estables, y causadas por dependencias incorrectas del paquete en cuestión " +#~ "o en un sistema ya roto. Por ello, no debería desactivar ciegamente esta " +#~ "opción ya que la situación mencionada anteriormente no es el único " +#~ "problema que la configuración inmediata puede resolver. Antes de llevar a " +#~ "cabo una operación grande como <literal>dist-upgrade</literal> con esta " +#~ "opción desactivada debería intentar un <literal>install</literal> con el " +#~ "paquete que APT es incapaz de configurar inmediatamente, pero asegúrese " +#~ "de informar del fallo a su distribución y al equipo de APT mediante el " +#~ "enlace a informes de fallo a continuación para que así puedan mejorar o " +#~ "corregir el proceso de actualización." + +#~ msgid "" +#~ "The package resource list is used to locate archives of the package " +#~ "distribution system in use on the system. At this time, this manual page " +#~ "documents only the packaging system used by the Debian system. This " +#~ "control file is <filename>/etc/apt/sources.list</filename>." +#~ msgstr "" +#~ "La lista de los repositorios de paquetes se usa para ubicar los archivos " +#~ "de Debian del sistema de distribución de paquetes en uso en el sistema. A " +#~ "día de hoy, esta página del manual documenta sólo el sistema de paquetes " +#~ "que usa Debian. Este fichero de control está ubicado en <filename>/etc/" +#~ "apt/sources.list</filename>" + +#~ msgid "" +#~ "The source list is designed to support any number of active sources and a " +#~ "variety of source media. The file lists one source per line, with the " +#~ "most preferred source listed first. The format of each line is: " +#~ "<literal>type uri args</literal> The first item, <literal>type</literal> " +#~ "determines the format for <literal>args</literal>. <literal>uri</literal> " +#~ "is a Universal Resource Identifier (URI), which is a superset of the more " +#~ "specific and well-known Universal Resource Locator, or URL. The rest of " +#~ "the line can be marked as a comment by using a #." +#~ msgstr "" +#~ "La lista de los repositorios está diseñada para gestionar cualquier " +#~ "número de fuentes y distintos tipos de procedencias. El fichero lista una " +#~ "fuente por línea, con la fuente de mayor prioridad en la primera línea. " +#~ "El formato de cada línea es: <literal>tipo uri argumentos</literal>. El " +#~ "primer elemento, <literal>tipo</literal>, determina el formato de " +#~ "<literal>argumentos</literal>. <literal>uri</literal> es «Universal " +#~ "Resource Identifier» (Identificador Universal de Recursos), un " +#~ "superconjunto de la más específica y bien conocida «Universal Resource " +#~ "Locator» (URL). Se puede marcar el resto de la línea como comentario " +#~ "usando #." + +#~ msgid "" #~ "<literal>gencaches</literal> performs the same operation as <command>apt-" #~ "get check</command>. It builds the source and package caches from the " #~ "sources in &sources-list; and from <filename>/var/lib/dpkg/status</" |