diff options
Diffstat (limited to 'doc/po/ja.po')
| -rw-r--r-- | doc/po/ja.po | 1597 |
1 files changed, 944 insertions, 653 deletions
diff --git a/doc/po/ja.po b/doc/po/ja.po index 50c42b851..c846f8c34 100644 --- a/doc/po/ja.po +++ b/doc/po/ja.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: apt 0.7.25.3\n" "Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n" -"POT-Creation-Date: 2012-06-06 23:46+0300\n" +"POT-Creation-Date: 2012-06-09 19:12+0300\n" "PO-Revision-Date: 2010-09-07 07:38+0900\n" "Last-Translator: KURASAWA Nozomu <nabetaro@caldron.jp>\n" "Language-Team: Debian Japanese List <debian-japanese@lists.debian.org>\n" @@ -1600,7 +1600,7 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> #: apt-get.8.xml:518 apt-cache.8.xml:343 apt-key.8.xml:174 apt-mark.8.xml:125 -#: apt.conf.5.xml:1118 apt_preferences.5.xml:698 +#: apt.conf.5.xml:1156 apt_preferences.5.xml:698 msgid "Files" msgstr "ファイル" @@ -1608,7 +1608,7 @@ msgstr "ファイル" #. type: Content of: <refentry><refsect1><title> #: apt-get.8.xml:528 apt-cache.8.xml:350 apt-key.8.xml:195 apt-mark.8.xml:131 #: apt-secure.8.xml:191 apt-cdrom.8.xml:144 apt-config.8.xml:109 -#: apt.conf.5.xml:1124 apt_preferences.5.xml:705 sources.list.5.xml:252 +#: apt.conf.5.xml:1162 apt_preferences.5.xml:705 sources.list.5.xml:252 #: apt-extracttemplates.1.xml:70 apt-sortpkgs.1.xml:63 #: apt-ftparchive.1.xml:607 msgid "See Also" @@ -3297,11 +3297,17 @@ msgstr "APT の設定ファイル" #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:42 +#, fuzzy +#| msgid "" +#| "<filename>apt.conf</filename> is the main configuration file for the APT " +#| "suite of tools, but by far not the only place changes to options can be " +#| "made. All tools therefore share the configuration files and also use a " +#| "common command line parser to provide a uniform environment." msgid "" -"<filename>apt.conf</filename> is the main configuration file for the APT " -"suite of tools, but by far not the only place changes to options can be " -"made. All tools therefore share the configuration files and also use a " -"common command line parser to provide a uniform environment." +"<filename>/etc/apt/apt.conf</filename> is the main configuration file shared " +"by all the tools in the APT suite of tools, though it is by no means the " +"only place options can be set. The suite also shares a common command line " +"parser to provide a uniform environment." msgstr "" "<filename>apt.conf</filename> は、APT ツールスイートのメイン設定ファイルです" "が、間違いなくオプションの変更を指定するだけの場所などではありません。そのた" @@ -3309,21 +3315,21 @@ msgstr "" "ンドラインパーサも使用します。" #. type: Content of: <refentry><refsect1><orderedlist><para> -#: apt.conf.5.xml:47 +#: apt.conf.5.xml:48 msgid "" "When an APT tool starts up it will read the configuration files in the " "following order:" msgstr "APT ツールの起動時に、設定ファイルを以下の順番で読み込みます。" #. type: Content of: <refentry><refsect1><orderedlist><listitem><para> -#: apt.conf.5.xml:49 +#: apt.conf.5.xml:50 msgid "" "the file specified by the <envar>APT_CONFIG</envar> environment variable (if " "any)" msgstr "<envar>APT_CONFIG</envar> 環境変数で指定したファイル (存在する場合)" #. type: Content of: <refentry><refsect1><orderedlist><listitem><para> -#: apt.conf.5.xml:51 +#: apt.conf.5.xml:52 #, fuzzy #| msgid "" #| "all files in <literal>Dir::Etc::Parts</literal> in alphanumeric ascending " @@ -3336,8 +3342,8 @@ msgid "" "extension and which only contain alphanumeric, hyphen (-), underscore (_) " "and period (.) characters. Otherwise APT will print a notice that it has " "ignored a file, unless that file matches a pattern in the <literal>Dir::" -"Ignore-Files-Silently</literal> configuration list - in this case it will be " -"silently ignored." +"Ignore-Files-Silently</literal> configuration list - in which case it will " +"be silently ignored." msgstr "" "<literal>Dir::Etc::Parts</literal> にあるすべてのファイルを英数字の昇順に。" "ファイル名には拡張子がないか、\"<literal>conf</literal>\" となっており、英数" @@ -3346,13 +3352,13 @@ msgstr "" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><orderedlist><listitem><para> -#: apt.conf.5.xml:58 +#: apt.conf.5.xml:59 msgid "" "the main configuration file specified by <literal>Dir::Etc::main</literal>" msgstr "<literal>Dir::Etc::Main</literal> で指定される、メイン設定ファイル" #. type: Content of: <refentry><refsect1><orderedlist><listitem><para> -#: apt.conf.5.xml:60 +#: apt.conf.5.xml:61 msgid "" "the command line options are applied to override the configuration " "directives or to load even more configuration files." @@ -3361,17 +3367,17 @@ msgstr "" "加読み込みができます。" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:64 +#: apt.conf.5.xml:65 msgid "Syntax" msgstr "構文" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:65 +#: apt.conf.5.xml:66 msgid "" "The configuration file is organized in a tree with options organized into " "functional groups. Option specification is given with a double colon " -"notation, for instance <literal>APT::Get::Assume-Yes</literal> is an option " +"notation; for instance <literal>APT::Get::Assume-Yes</literal> is an option " "within the APT tool group, for the Get tool. Options do not inherit from " "their parent groups." msgstr "" @@ -3382,19 +3388,31 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:71 +#: apt.conf.5.xml:72 +#, fuzzy +#| msgid "" +#| "Syntactically the configuration language is modeled after what the ISC " +#| "tools such as bind and dhcp use. Lines starting with <literal>//</" +#| "literal> are treated as comments (ignored), as well as all text between " +#| "<literal>/*</literal> and <literal>*/</literal>, just like C/C++ " +#| "comments. Each line is of the form <literal>APT::Get::Assume-Yes \"true" +#| "\";</literal>. The trailing semicolon and the quotes are required. The " +#| "value must be on one line, and there is no kind of string concatenation. " +#| "It must not include inside quotes. The behavior of the backslash \"\\\" " +#| "and escaped characters inside a value is undefined and it should not be " +#| "used. An option name may include alphanumerical characters and the \"/-:._" +#| "+\" characters. A new scope can be opened with curly braces, like:" msgid "" "Syntactically the configuration language is modeled after what the ISC tools " "such as bind and dhcp use. Lines starting with <literal>//</literal> are " "treated as comments (ignored), as well as all text between <literal>/*</" "literal> and <literal>*/</literal>, just like C/C++ comments. Each line is " -"of the form <literal>APT::Get::Assume-Yes \"true\";</literal>. The trailing " -"semicolon and the quotes are required. The value must be on one line, and " -"there is no kind of string concatenation. It must not include inside " -"quotes. The behavior of the backslash \"\\\" and escaped characters inside " -"a value is undefined and it should not be used. An option name may include " -"alphanumerical characters and the \"/-:._+\" characters. A new scope can be " -"opened with curly braces, like:" +"of the form <literal>APT::Get::Assume-Yes \"true\";</literal>. The " +"quotation marks and trailing semicolon are required. The value must be on " +"one line, and there is no kind of string concatenation. Values must not " +"include backslashes or extra quotation marks. Option names are made up of " +"alphanumeric characters and the characters \"/-:._+\". A new scope can be " +"opened with curly braces, like this:" msgstr "" "設定言語の構文は、bind や dhcp のような ISC ツールをモデルにしています。" "<literal>//</literal> で始まる行はコメントとして扱われます (無視)。同様に C/C" @@ -3428,10 +3446,16 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:93 +#, fuzzy +#| msgid "" +#| "with newlines placed to make it more readable. Lists can be created by " +#| "opening a scope and including a single string enclosed in quotes followed " +#| "by a semicolon. Multiple entries can be included, each separated by a " +#| "semicolon." msgid "" "with newlines placed to make it more readable. Lists can be created by " "opening a scope and including a single string enclosed in quotes followed by " -"a semicolon. Multiple entries can be included, each separated by a semicolon." +"a semicolon. Multiple entries can be included, separated by a semicolon." msgstr "" "また適宜改行することで、より読みやすくなります。リストは、開いたスコープ、" "クォートで囲まれた 1 単語、そしてセミコロンと続けることで作成できます。セミコ" @@ -3458,9 +3482,13 @@ msgstr "" #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:105 +#, fuzzy +#| msgid "" +#| "The names of the configuration items are not case-sensitive. So in the " +#| "previous example you could use <literal>dpkg::pre-install-pkgs</literal>." msgid "" -"The names of the configuration items are not case-sensitive. So in the " -"previous example you could use <literal>dpkg::pre-install-pkgs</literal>." +"Case is not significant in names of configuration items, so in the previous " +"example you could use <literal>dpkg::pre-install-pkgs</literal>." msgstr "" "設定項目の名前は、文字の大小を区別しません。そのため、前述の例を " "<literal>dpkg::pre-install-pkgs</literal> とできます。" @@ -3468,11 +3496,11 @@ msgstr "" #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:108 msgid "" -"Names for the configuration items are optional if a list is defined as it " -"can be see in the <literal>DPkg::Pre-Install-Pkgs</literal> example above. " -"If you don't specify a name a new entry will simply add a new option to the " -"list. If you specify a name you can override the option as every other " -"option by reassigning a new value to the option." +"Names for the configuration items are optional if a list is defined as can " +"be seen in the <literal>DPkg::Pre-Install-Pkgs</literal> example above. If " +"you don't specify a name a new entry will simply add a new option to the " +"list. If you specify a name you can override the option in the same way as " +"any other option by reassigning a new value to the option." msgstr "" "前述した <literal>DPkg::Pre-Install-Pkgs</literal> の例で見られるように、リス" "トを定義した場合、設定項目名はオプションになります。名前を指定しない場合、新" @@ -3483,14 +3511,23 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:113 -msgid "" -"Two specials are allowed, <literal>#include</literal> (which is deprecated " -"and not supported by alternative implementations) and <literal>#clear</" -"literal>: <literal>#include</literal> will include the given file, unless " -"the filename ends in a slash, then the whole directory is included. " -"<literal>#clear</literal> is used to erase a part of the configuration tree. " -"The specified element and all its descendants are erased. (Note that these " -"lines also need to end with a semicolon.)" +#, fuzzy +#| msgid "" +#| "Two specials are allowed, <literal>#include</literal> (which is " +#| "deprecated and not supported by alternative implementations) and " +#| "<literal>#clear</literal>: <literal>#include</literal> will include the " +#| "given file, unless the filename ends in a slash, then the whole directory " +#| "is included. <literal>#clear</literal> is used to erase a part of the " +#| "configuration tree. The specified element and all its descendants are " +#| "erased. (Note that these lines also need to end with a semicolon.)" +msgid "" +"Two special commands are defined: <literal>#include</literal> (which is " +"deprecated and not supported by alternative implementations) and " +"<literal>#clear</literal>. <literal>#include</literal> will include the " +"given file, unless the filename ends in a slash, in which case the whole " +"directory is included. <literal>#clear</literal> is used to erase a part of " +"the configuration tree. The specified element and all its descendants are " +"erased. (Note that these lines also need to end with a semicolon.)" msgstr "" "<literal>#include</literal> (これは廃止予定でサポートしない他の実装もありま" "す) と <literal>#clear</literal> の 2 つの特別な記法があります。" @@ -3501,13 +3538,20 @@ msgstr "" "があることに注意してください)。" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:121 -msgid "" -"The #clear command is the only way to delete a list or a complete scope. " -"Reopening a scope or the ::-style described below will <emphasis>not</" -"emphasis> override previously written entries. Only options can be " -"overridden by addressing a new value to it - lists and scopes can't be " -"overridden, only cleared." +#: apt.conf.5.xml:123 +#, fuzzy +#| msgid "" +#| "The #clear command is the only way to delete a list or a complete scope. " +#| "Reopening a scope or the ::-style described below will <emphasis>not</" +#| "emphasis> override previously written entries. Only options can be " +#| "overridden by addressing a new value to it - lists and scopes can't be " +#| "overridden, only cleared." +msgid "" +"The <literal>#clear</literal> command is the only way to delete a list or a " +"complete scope. Reopening a scope (or using the syntax described below with " +"an appended <literal>::</literal>) will <emphasis>not</emphasis> override " +"previously written entries. Options can only be overridden by addressing a " +"new value to them - lists and scopes can't be overridden, only cleared." msgstr "" "#clear コマンドは、リストや完全なスコープを削除する唯一の方法です。スコープの" "再オープンや後述する :: スタイルは、それまで書いたエントリを<emphasis>上書き" @@ -3516,22 +3560,23 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:126 +#: apt.conf.5.xml:131 #, fuzzy #| msgid "" -#| "All of the APT tools take a -o option which allows an arbitrary " +#| "All of the APT tools take an -o option which allows an arbitrary " #| "configuration directive to be specified on the command line. The syntax " #| "is a full option name (<literal>APT::Get::Assume-Yes</literal> for " #| "instance) followed by an equals sign then the new value of the option. " #| "Lists can be appended too by adding a trailing :: to the list name. (As " #| "you might suspect: The scope syntax can't be used on the command line.)" msgid "" -"All of the APT tools take a -o option which allows an arbitrary " +"All of the APT tools take an -o option which allows an arbitrary " "configuration directive to be specified on the command line. The syntax is a " "full option name (<literal>APT::Get::Assume-Yes</literal> for instance) " "followed by an equals sign then the new value of the option. To append a new " -"element to a list, add a trailing :: to the name of the list. (As you might " -"suspect: The scope syntax can't be used on the command line.)" +"element to a list, add a trailing <literal>::</literal> to the name of the " +"list. (As you might suspect, the scope syntax can't be used on the command " +"line.)" msgstr "" "すべての APT ツールで、コマンドラインで任意の設定ディレクティブを指定できる -" "o オプションが使用できます。構文は、完全なオプション名 (例: <literal>APT::" @@ -3540,7 +3585,7 @@ msgstr "" "コープ構文はコマンドラインで使用できません)。" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:133 +#: apt.conf.5.xml:139 #, fuzzy #| msgid "" #| "Note that you can use :: only for appending one item per line to a list " @@ -3556,18 +3601,18 @@ msgstr "" #| "encounter this misuse, so please correct such statements now as long as " #| "APT doesn't complain explicit about them." msgid "" -"Note that you can use :: only for appending one item per line to a list and " -"that you should not use it in combination with the scope syntax. (The scope " -"syntax implicit insert ::) Using both syntaxes together will trigger a bug " -"which some users unfortunately depend on: An option with the unusual name " -"\"<literal>::</literal>\" which acts like every other option with a name. " -"These introduces many problems including that a user who writes multiple " -"lines in this <emphasis>wrong</emphasis> syntax in the hope to append to a " -"list will gain the opposite as only the last assignment for this option " -"\"<literal>::</literal>\" will be used. Upcoming APT versions will raise " -"errors and will stop working if they encounter this misuse, so please " -"correct such statements now as long as APT doesn't complain explicit about " -"them." +"Note that appending items to a list using <literal>::</literal> only works " +"for one item per line, and that you should not use it in combination with " +"the scope syntax (which adds <literal>::</literal> implicitly). Using both " +"syntaxes together will trigger a bug which some users unfortunately depend " +"on: an option with the unusual name \"<literal>::</literal>\" which acts " +"like every other option with a name. This introduces many problems; for one " +"thing, users who write multiple lines in this <emphasis>wrong</emphasis> " +"syntax in the hope of appending to a list will achieve the opposite, as only " +"the last assignment for this option \"<literal>::</literal>\" will be used. " +"Future versions of APT will raise errors and stop working if they encounter " +"this misuse, so please correct such statements now while APT doesn't " +"explicitly complain about them." msgstr "" "1 行で 1 項目の場合にのみ :: は使用でき、スコープ構文と組み合わせるべきではな" "いことに注意してください (スコープ構文には暗黙で :: が挿入されます)。両方の構" @@ -3582,13 +3627,13 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:145 +#: apt.conf.5.xml:154 msgid "The APT Group" msgstr "APT グループ" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:146 +#: apt.conf.5.xml:155 msgid "" "This group of options controls general APT behavior as well as holding the " "options for all of the tools." @@ -3598,7 +3643,7 @@ msgstr "" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:151 +#: apt.conf.5.xml:160 msgid "" "System Architecture; sets the architecture to use when fetching files and " "parsing package lists. The internal default is the architecture apt was " @@ -3609,25 +3654,25 @@ msgstr "" "ルしたアーキテクチャです。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:157 +#: apt.conf.5.xml:167 msgid "" -"All Architectures the system supports. Processors implementing the " -"<literal>amd64</literal> (also called <literal>x86-64</literal>) instruction " -"set are e.g. also able to execute binaries compiled for the <literal>i386</" -"literal> (<literal>x86</literal>) instruction set; This list is use when " -"fetching files and parsing package lists. The internal default is always the " -"native architecture (<literal>APT::Architecture</literal>) and all foreign " -"architectures it can retrieve by calling <command>dpkg --print-foreign-" -"architectures</command>." +"All Architectures the system supports. For instance, CPUs implementing the " +"<literal>amd64</literal> (also called <literal>x86-64</literal>) " +"instruction set are also able to execute binaries compiled for the " +"<literal>i386</literal> (<literal>x86</literal>) instruction set. This list " +"is used when fetching files and parsing package lists. The initial default " +"is always the system's native architecture (<literal>APT::Architecture</" +"literal>), and foreign architectures are added to the default list when they " +"are registered via <command>dpkg --add-architecture</command>." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:167 +#: apt.conf.5.xml:180 msgid "" -"Default release to install packages from if more than one version available. " -"Contains release name, codename or release version. Examples: 'stable', " -"'testing', 'unstable', '&stable-codename;', '&testing-codename;', '4.0', " -"'5.0*'. See also &apt-preferences;." +"Default release to install packages from if more than one version is " +"available. Contains release name, codename or release version. Examples: " +"'stable', 'testing', 'unstable', '&stable-codename;', '&testing-codename;', " +"'4.0', '5.0*'. See also &apt-preferences;." msgstr "" "ひとつ以上のバージョンがある場合に、パッケージをインストールを行うデフォルト" "リリースです。リリース名や、コード名、リリースバージョンがあります。例えば " @@ -3636,9 +3681,9 @@ msgstr "" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:173 +#: apt.conf.5.xml:186 msgid "" -"Ignore Held packages; This global option causes the problem resolver to " +"Ignore held packages; this global option causes the problem resolver to " "ignore held packages in its decision making." msgstr "" "保留パッケージの無視 - このグローバルオプションは、問題解決器に保留と指定した" @@ -3646,7 +3691,7 @@ msgstr "" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:178 +#: apt.conf.5.xml:191 msgid "" "Defaults to on. When turned on the autoclean feature will remove any " "packages which can no longer be downloaded from the cache. If turned off " @@ -3660,71 +3705,68 @@ msgstr "" "ださい。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:185 -msgid "" -"Defaults to on which will cause APT to install essential and important " -"packages as fast as possible in the install/upgrade operation. This is done " -"to limit the effect of a failing &dpkg; call: If this option is disabled APT " -"does treat an important package in the same way as an extra package: Between " -"the unpacking of the important package A and his configuration can then be " -"many other unpack or configuration calls, e.g. for package B which has no " -"relation to A, but causes the dpkg call to fail (e.g. because maintainer " -"script of package B generates an error) which results in a system state in " -"which package A is unpacked but unconfigured - each package depending on A " -"is now no longer guaranteed to work as their dependency on A is not longer " -"satisfied. The immediate configuration marker is also applied to all " -"dependencies which can generate a problem if the dependencies e.g. form a " -"circle as a dependency with the immediate flag is comparable with a Pre-" -"Dependency. So in theory it is possible that APT encounters a situation in " -"which it is unable to perform immediate configuration, errors out and refers " -"to this option so the user can deactivate the immediate configuration " -"temporarily to be able to perform an install/upgrade again. Note the use of " -"the word \"theory\" here as this problem was only encountered by now in real " -"world a few times in non-stable distribution versions and was caused by " -"wrong dependencies of the package in question or by a system in an already " -"broken state, so you should not blindly disable this option as the mentioned " -"scenario above is not the only problem immediate configuration can help to " -"prevent in the first place. Before a big operation like <literal>dist-" -"upgrade</literal> is run with this option disabled it should be tried to " -"explicitly <literal>install</literal> the package APT is unable to configure " -"immediately, but please make sure to report your problem also to your " -"distribution and to the APT team with the buglink below so they can work on " -"improving or correcting the upgrade process." -msgstr "" -"デフォルトで有効で、インストールやアップグレード処理中に、APT が不可欠パッ" -"ケージや重要パッケージのインストールを、可能な限り早く行うようになります。" -"&dpkg; の呼び出す際の失敗回数に制限があるため、このようなオプションがありま" -"す。このオプションが無効の場合、APT は重要パッケージを、特別パッケージと同様" -"に扱うようになります。重要パッケージ A を展開していて、その設定中に他の展開や" -"設定をたくさん呼び出すと、パッケージ B は A とはなんの関係もないにもかかわら" -"ず、dpkg の呼び出しが失敗します (つまり B のメンテナスクリプトがエラーを返し" -"ます)。この結果、システムの状態として、パッケージ A は展開済みで未設定となり" -"ます。A に依存するパッケージは、動作の保証がなくなり、A に対する依存関係は、" -"もう満たせなくなります。 即時設定マーカは、たとえば環状の依存関係といった問題" -"が発生しそうな、すべての依存関係に先行依存と同等の即時フラグを適用します。そ" -"のため理論上では、APT が即時設定できない、エラーが発生する、このオプションを" -"参照するといった状況になる可能性があるのは、ユーザが即時設定を一時的に無効に" -"して、インストールやアップグレードを行った場合です。「理論上」と言う単語を" -"使ったのは、現在現実世界でこの問題に遭遇したのは、不安定版を使用しており、問" -"題になっていたパッケージの間違った依存関係が原因だったり、システムが既に破損" -"状態であったりした数回だけだからです。前述のシナリオが、即時設定が主に回避す" -"る問題のすべてというわけではないため、このオプションを闇雲に無効にするべきで" -"はありません。<literal>dist-upgrade</literal> のような大きな操作を、このオプ" -"ションを無効にして行う前に、APT がすぐに設定できないパッケージを、明示的に " -"<literal>install</literal> してみてください。ですが、アップグレードプロセスの" -"改善のため、バグのリンクにあるディストリビューションと APT チームにも、問題の" -"レポートをおねがいします。" - -# type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:208 -msgid "" -"Never Enable this option unless you -really- know what you are doing. It " -"permits APT to temporarily remove an essential package to break a Conflicts/" -"Conflicts or Conflicts/Pre-Depend loop between two essential packages. SUCH " -"A LOOP SHOULD NEVER EXIST AND IS A GRAVE BUG. This option will work if the " -"essential packages are not tar, gzip, libc, dpkg, bash or anything that " -"those packages depend on." +#: apt.conf.5.xml:199 +msgid "" +"Defaults to on, which will cause APT to install essential and important " +"packages as soon as possible in an install/upgrade operation, in order to " +"limit the effect of a failing &dpkg; call. If this option is disabled, APT " +"treats an important package in the same way as an extra package: between the " +"unpacking of the package A and its configuration there can be many other " +"unpack or configuration calls for other unrelated packages B, C etc. If " +"these cause the &dpkg; call to fail (e.g. because package B's maintainer " +"scripts generate an error), this results in a system state in which package " +"A is unpacked but unconfigured - so any package depending on A is now no " +"longer guaranteed to work, as its dependency on A is no longer satisfied." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:211 +msgid "" +"The immediate configuration marker is also applied in the potentially " +"problematic case of circular dependencies, since a dependency with the " +"immediate flag is equivalent to a Pre-Dependency. In theory this allows APT " +"to recognise a situation in which it is unable to perform immediate " +"configuration, abort, and suggest to the user that the option should be " +"temporarily deactivated in order to allow the operation to proceed. Note " +"the use of the word \"theory\" here; in the real world this problem has " +"rarely been encountered, in non-stable distribution versions, and was caused " +"by wrong dependencies of the package in question or by a system in an " +"already broken state; so you should not blindly disable this option, as the " +"scenario mentioned above is not the only problem it can help to prevent in " +"the first place." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:224 +msgid "" +"Before a big operation like <literal>dist-upgrade</literal> is run with this " +"option disabled you should try to explicitly <literal>install</literal> the " +"package APT is unable to configure immediately; but please make sure you " +"also report your problem to your distribution and to the APT team with the " +"buglink below, so they can work on improving or correcting the upgrade " +"process." +msgstr "" + +# type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:235 +#, fuzzy +#| msgid "" +#| "Never Enable this option unless you -really- know what you are doing. It " +#| "permits APT to temporarily remove an essential package to break a " +#| "Conflicts/Conflicts or Conflicts/Pre-Depend loop between two essential " +#| "packages. SUCH A LOOP SHOULD NEVER EXIST AND IS A GRAVE BUG. This option " +#| "will work if the essential packages are not tar, gzip, libc, dpkg, bash " +#| "or anything that those packages depend on." +msgid "" +"Never enable this option unless you <emphasis>really</emphasis> know what " +"you are doing. It permits APT to temporarily remove an essential package to " +"break a Conflicts/Conflicts or Conflicts/Pre-Depends loop between two " +"essential packages. <emphasis>Such a loop should never exist and is a grave " +"bug</emphasis>. This option will work if the essential packages are not " +"<command>tar</command>, <command>gzip</command>, <command>libc</command>, " +"<command>dpkg</command>, <command>dash</command> or anything that those " +"packages depend on." msgstr "" "何をしようとしているのか「本当に」判っているのでなければ、絶対にこのオプショ" "ンを有効にしないでください。不可欠 (essential) パッケージ同士で、競合 " @@ -3735,36 +3777,39 @@ msgstr "" "不可欠パッケージで動作します。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:217 +#: apt.conf.5.xml:247 msgid "" "APT uses since version 0.7.26 a resizable memory mapped cache file to store " -"the 'available' information. <literal>Cache-Start</literal> acts as a hint " -"to which size the Cache will grow and is therefore the amount of memory APT " +"the available information. <literal>Cache-Start</literal> acts as a hint of " +"the size the cache will grow to, and is therefore the amount of memory APT " "will request at startup. The default value is 20971520 bytes (~20 MB). Note " -"that this amount of space needs to be available for APT otherwise it will " +"that this amount of space needs to be available for APT; otherwise it will " "likely fail ungracefully, so for memory restricted devices this value should " "be lowered while on systems with a lot of configured sources it should be " "increased. <literal>Cache-Grow</literal> defines in bytes with the default " -"of 1048576 (~1 MB) how much the Cache size will be increased in the event " -"the space defined by <literal>Cache-Start</literal> is not enough. These " +"of 1048576 (~1 MB) how much the cache size will be increased in the event " +"the space defined by <literal>Cache-Start</literal> is not enough. This " "value will be applied again and again until either the cache is big enough " "to store all information or the size of the cache reaches the <literal>Cache-" "Limit</literal>. The default of <literal>Cache-Limit</literal> is 0 which " "stands for no limit. If <literal>Cache-Grow</literal> is set to 0 the " -"automatic grow of the cache is disabled." +"automatic growth of the cache is disabled." msgstr "" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:233 -msgid "Defines which package(s) are considered essential build dependencies." +#: apt.conf.5.xml:263 +#, fuzzy +#| msgid "" +#| "Defines which package(s) are considered essential build dependencies." +msgid "Defines which packages are considered essential build dependencies." msgstr "構築依存関係で不可欠なパッケージを定義します。" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:237 +#: apt.conf.5.xml:267 msgid "" -"The Get subsection controls the &apt-get; tool, please see its documentation " +"The Get subsection controls the &apt-get; tool; please see its documentation " "for more information about the options here." msgstr "" "Get サブセクションは &apt-get; ツールを制御します。このオプションの詳細は " @@ -3772,9 +3817,9 @@ msgstr "" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:242 +#: apt.conf.5.xml:272 msgid "" -"The Cache subsection controls the &apt-cache; tool, please see its " +"The Cache subsection controls the &apt-cache; tool; please see its " "documentation for more information about the options here." msgstr "" "Cache サブセクションは &apt-cache; ツールを制御します。このオプションの詳細" @@ -3782,9 +3827,9 @@ msgstr "" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:247 +#: apt.conf.5.xml:277 msgid "" -"The CDROM subsection controls the &apt-cdrom; tool, please see its " +"The CDROM subsection controls the &apt-cdrom; tool; please see its " "documentation for more information about the options here." msgstr "" "CDROM サブセクションは &apt-cdrom; ツールを制御します。このオプションの詳細" @@ -3792,13 +3837,13 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:253 +#: apt.conf.5.xml:283 msgid "The Acquire Group" msgstr "Acquire グループ" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:254 +#: apt.conf.5.xml:284 #, fuzzy #| msgid "" #| "The <literal>Acquire</literal> group of options controls the download of " @@ -3806,58 +3851,67 @@ msgstr "Acquire グループ" #| "\"0\"/>" msgid "" "The <literal>Acquire</literal> group of options controls the download of " -"packages and the URI handlers." +"packages as well as the various \"acquire methods\" responsible for the " +"download itself (see also &sources-list;)." msgstr "" "オプションの <literal>Acquire</literal> グループは、パッケージのダウンロード" "や URI ハンドラの制御を行います。<placeholder type=\"variablelist\" id=\"0\"/" ">" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:259 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:291 msgid "" -"Security related option defaulting to true as an expiring validation for a " -"Release file prevents longtime replay attacks and can e.g. also help users " -"to identify no longer updated mirrors - but the feature depends on the " -"correctness of the time on the user system. Archive maintainers are " -"encouraged to create Release files with the <literal>Valid-Until</literal> " -"header, but if they don't or a stricter value is volitional the following " -"<literal>Max-ValidTime</literal> option can be used." +"Security related option defaulting to true, as giving a Release file's " +"validation an expiration date prevents replay attacks over a long timescale, " +"and can also for example help users to identify mirrors that are no longer " +"updated - but the feature depends on the correctness of the clock on the " +"user system. Archive maintainers are encouraged to create Release files with " +"the <literal>Valid-Until</literal> header, but if they don't or a stricter " +"value is desired the <literal>Max-ValidTime</literal> option below can be " +"used." msgstr "" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:270 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:304 msgid "" -"Seconds the Release file should be considered valid after it was created " -"(indicated by the <literal>Date</literal> header). If the Release file " -"itself includes a <literal>Valid-Until</literal> header the earlier date of " -"the two is used as the expiration date. The default value is <literal>0</" -"literal> which stands for \"for ever valid\". Archive specific settings can " -"be made by appending the label of the archive to the option name." +"Maximum time (in seconds) after its creation (as indicated by the " +"<literal>Date</literal> header) that the <filename>Release</filename> file " +"should be considered valid. If the Release file itself includes a " +"<literal>Valid-Until</literal> header the earlier date of the two is used as " +"the expiration date. The default value is <literal>0</literal> which stands " +"for \"valid forever\". Archive specific settings can be made by appending " +"the label of the archive to the option name." msgstr "" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:281 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:316 msgid "" -"Minimum of seconds the Release file should be considered valid after it was " -"created (indicated by the <literal>Date</literal> header). Use this if you " -"need to use a seldomly updated (local) mirror of a more regular updated " -"archive with a <literal>Valid-Until</literal> header instead of completely " -"disabling the expiration date checking. Archive specific settings can and " -"should be used by appending the label of the archive to the option name." +"Minimum time (in seconds) after its creation (as indicated by the " +"<literal>Date</literal> header) that the <filename>Release</filename> file " +"should be considered valid. Use this if you need to use a seldom updated " +"(local) mirror of a more frequently updated archive with a <literal>Valid-" +"Until</literal> header instead of completely disabling the expiration date " +"checking. Archive specific settings can and should be used by appending the " +"label of the archive to the option name." msgstr "" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:292 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:328 +#, fuzzy +#| msgid "" +#| "Try to download deltas called <literal>PDiffs</literal> for Packages or " +#| "Sources files instead of downloading whole ones. True by default." msgid "" -"Try to download deltas called <literal>PDiffs</literal> for Packages or " -"Sources files instead of downloading whole ones. True by default." +"Try to download deltas called <literal>PDiffs</literal> for indexes (like " +"<filename>Packages</filename> files) instead of downloading whole ones. True " +"by default." msgstr "" "Packages ファイルや Sources ファイルの全体をダウンロードするのではなく、" "<literal>PDiffs</literal> と呼ばれる差分をダウンロードしようとします。デフォ" "ルトでは True です。" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:295 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:331 #, fuzzy #| msgid "" #| "Two sub-options to limit the use of PDiffs are also available: With " @@ -3867,12 +3921,12 @@ msgstr "" #| "to the size of the targeted file. If one of these limits is exceeded the " #| "complete file is downloaded instead of the patches." msgid "" -"Two sub-options to limit the use of PDiffs are also available: With " -"<literal>FileLimit</literal> can be specified how many PDiff files are " -"downloaded at most to update a file. <literal>SizeLimit</literal> on the " -"other hand is the maximum percentage of the size of all patches compared to " -"the size of the targeted file. If one of these limits is exceeded the " -"complete file is downloaded instead of the patches." +"Two sub-options to limit the use of PDiffs are also available: " +"<literal>FileLimit</literal> can be used to specify a maximum number of " +"PDiff files should be downloaded to update a file. <literal>SizeLimit</" +"literal> on the other hand is the maximum percentage of the size of all " +"patches compared to the size of the targeted file. If one of these limits is " +"exceeded the complete file is downloaded instead of the patches." msgstr "" "PDiffs の使用を制限するふたつのサブオプションがあります。<literal>FileLimit</" "literal> では、PDiff ファイルをいくつダウンロードしてパッチを当てるかを指定し" @@ -3881,8 +3935,8 @@ msgstr "" "をダウンロードする代わりに、完全なファイルをダウンロードします。" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:305 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:341 msgid "" "Queuing mode; <literal>Queue-Mode</literal> can be one of <literal>host</" "literal> or <literal>access</literal> which determines how APT parallelizes " @@ -3896,8 +3950,8 @@ msgstr "" "<literal>access</literal> は、URI タイプごとに 1 接続を開きます。" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:313 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:349 msgid "" "Number of retries to perform. If this is non-zero APT will retry failed " "files the given number of times." @@ -3906,8 +3960,8 @@ msgstr "" "えられた回数だけリトライを行います。" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:318 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:354 msgid "" "Use symlinks for source archives. If set to true then source archives will " "be symlinked when possible instead of copying. True is the default." @@ -3917,15 +3971,24 @@ msgstr "" "す。" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:323 -msgid "" -"HTTP URIs; http::Proxy is the default http proxy to use. It is in the " -"standard form of <literal>http://[[user][:pass]@]host[:port]/</literal>. Per " -"host proxies can also be specified by using the form <literal>http::Proxy::" -"<host></literal> with the special keyword <literal>DIRECT</literal> " -"meaning to use no proxies. If no one of the above settings is specified, " -"<envar>http_proxy</envar> environment variable will be used." +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:359 +#, fuzzy +#| msgid "" +#| "HTTP URIs; http::Proxy is the default http proxy to use. It is in the " +#| "standard form of <literal>http://[[user][:pass]@]host[:port]/</literal>. " +#| "Per host proxies can also be specified by using the form <literal>http::" +#| "Proxy::<host></literal> with the special keyword <literal>DIRECT</" +#| "literal> meaning to use no proxies. If no one of the above settings is " +#| "specified, <envar>http_proxy</envar> environment variable will be used." +msgid "" +"<literal>http::Proxy</literal> sets the default proxy to use for HTTP URIs. " +"It is in the standard form of <literal>http://[[user][:pass]@]host[:port]/</" +"literal>. Per host proxies can also be specified by using the form " +"<literal>http::Proxy::<host></literal> with the special keyword " +"<literal>DIRECT</literal> meaning to use no proxies. If no one of the above " +"settings is specified, <envar>http_proxy</envar> environment variable will " +"be used." msgstr "" "HTTP URI - http::Proxy は、デフォルトで使用する http プロキシです。" "<literal>http://[[user][:pass]@]host[:port]/</literal> という標準形で表しま" @@ -3935,18 +3998,27 @@ msgstr "" "も指定しないと、環境変数 <envar>http_proxy</envar> を使用します。" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:331 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:367 +#, fuzzy +#| msgid "" +#| "Three settings are provided for cache control with HTTP/1.1 compliant " +#| "proxy caches. <literal>No-Cache</literal> tells the proxy to not use its " +#| "cached response under any circumstances, <literal>Max-Age</literal> is " +#| "sent only for index files and tells the cache to refresh its object if it " +#| "is older than the given number of seconds. Debian updates its index files " +#| "daily so the default is 1 day. <literal>No-Store</literal> specifies that " +#| "the cache should never store this request, it is only set for archive " +#| "files. This may be useful to prevent polluting a proxy cache with very " +#| "large .deb files. Note: Squid 2.0.2 does not support any of these options." msgid "" "Three settings are provided for cache control with HTTP/1.1 compliant proxy " -"caches. <literal>No-Cache</literal> tells the proxy to not use its cached " -"response under any circumstances, <literal>Max-Age</literal> is sent only " -"for index files and tells the cache to refresh its object if it is older " -"than the given number of seconds. Debian updates its index files daily so " -"the default is 1 day. <literal>No-Store</literal> specifies that the cache " -"should never store this request, it is only set for archive files. This may " -"be useful to prevent polluting a proxy cache with very large .deb files. " -"Note: Squid 2.0.2 does not support any of these options." +"caches. <literal>No-Cache</literal> tells the proxy not to use its cached " +"response under any circumstances. <literal>Max-Age</literal> sets the " +"allowed maximum age (in seconds) of an index file in the cache of the " +"proxy. <literal>No-Store</literal> specifies that the proxy should not " +"store the requested archive files in its cache, which can be used to prevent " +"the proxy from polluting its cache with (big) .deb files." msgstr "" "HTTP/1.1 準拠のプロキシキャッシュの制御について 3 種類の設定があります。" "<literal>No-Cache</literal> はプロキシに対して、いかなる時もキャッシュを使用" @@ -3960,52 +4032,63 @@ msgstr "" "トしていません。" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:341 apt.conf.5.xml:407 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:377 apt.conf.5.xml:449 +#, fuzzy +#| msgid "" +#| "The option <literal>timeout</literal> sets the timeout timer used by the " +#| "method; this applies to all things including connection timeout and data " +#| "timeout." msgid "" "The option <literal>timeout</literal> sets the timeout timer used by the " -"method, this applies to all things including connection timeout and data " -"timeout." +"method; this value applies to the connection as well as the data timeout." msgstr "" "<literal>timeout</literal> オプションは、この方法でのタイムアウトまでの時間を" "設定します。これには、接続のタイムアウトとデータのタイムアウトが含まれていま" "す。" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:344 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:380 msgid "" "The setting <literal>Acquire::http::Pipeline-Depth</literal> can be used to " -"enabled HTTP pipeling (RFC 2616 section 8.1.2.2) which can be beneficial e." -"g. on high-latency connections. It specifies how many requests are send in a " +"enable HTTP pipelining (RFC 2616 section 8.1.2.2) which can be beneficial e." +"g. on high-latency connections. It specifies how many requests are sent in a " "pipeline. Previous APT versions had a default of 10 for this setting, but " "the default value is now 0 (= disabled) to avoid problems with the ever-" "growing amount of webservers and proxies which choose to not conform to the " "HTTP/1.1 specification." msgstr "" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:351 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:387 msgid "" -"<literal>Acquire::http::AllowRedirect</literal> controls if APT will follow " -"redirects, which is enabled by default." +"<literal>Acquire::http::AllowRedirect</literal> controls whether APT will " +"follow redirects, which is enabled by default." msgstr "" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:354 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:390 +#, fuzzy +#| msgid "" +#| "The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</" +#| "literal> which accepts integer values in kilobytes. The default value is " +#| "0 which deactivates the limit and tries uses as much as possible of the " +#| "bandwidth (Note that this option implicit deactivates the download from " +#| "multiple servers at the same time.)" msgid "" "The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</" -"literal> which accepts integer values in kilobyte. The default value is 0 " -"which deactivates the limit and tries uses as much as possible of the " -"bandwidth (Note that this option implicit deactivates the download from " -"multiple servers at the same time.)" +"literal> which accepts integer values in kilobytes. The default value is 0 " +"which deactivates the limit and tries to use all available bandwidth (note " +"that this option implicitly disables downloading from multiple servers at " +"the same time.)" msgstr "" "使用する帯域を制限するには、<literal>Acquire::http::Dl-Limit</literal> にキロ" "バイトで整数値を与えます。デフォルト値は 0 で、制限を解除し、使用できる帯域を" "すべて使おうとします (このオプションは暗黙的に、同時に複数のサーバからダウン" "ロードしなくなることに注意してください)。" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:359 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:395 msgid "" "<literal>Acquire::http::User-Agent</literal> can be used to set a different " "User-Agent for the http download method as some proxies allow access for " @@ -4015,14 +4098,22 @@ msgstr "" "場合、<literal>Acquire::http::User-Agent</literal> を使用して、http でダウン" "ロードするための、異なる User-Agent を設定できます。" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:366 -msgid "" -"HTTPS URIs. Cache-control, Timeout, AllowRedirect, Dl-Limit and proxy " -"options are the same as for <literal>http</literal> method and will also " -"default to the options from the <literal>http</literal> method if they are " -"not explicitly set for https. <literal>Pipeline-Depth</literal> option is " -"not supported yet." +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:403 +#, fuzzy +#| msgid "" +#| "HTTPS URIs. Cache-control, Timeout, AllowRedirect, Dl-Limit and proxy " +#| "options are the same as for <literal>http</literal> method and will also " +#| "default to the options from the <literal>http</literal> method if they " +#| "are not explicitly set for https. <literal>Pipeline-Depth</literal> " +#| "option is not supported yet." +msgid "" +"The <literal>Cache-control</literal>, <literal>Timeout</literal>, " +"<literal>AllowRedirect</literal>, <literal>Dl-Limit</literal> and " +"<literal>proxy</literal> options work for HTTPS URIs in the same way as for " +"the <literal>http</literal> method, and default to the same values if they " +"are not explicitly set. The <literal>Pipeline-Depth</literal> option is not " +"yet supported." msgstr "" "HTTPS URI - キャッシュ制御、タイムアウト、AllowRedirect、Dl-Limit、プロキシオ" "プションは <literal>http</literal> メソッドと同様です。また、https 用に明示的" @@ -4030,25 +4121,44 @@ msgstr "" "ドと同じです。<literal>Pipeline-Depth</literal> オプションはまだサポートして" "いません。" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:372 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:411 +#, fuzzy +#| msgid "" +#| "<literal>CaInfo</literal> suboption specifies place of file that holds " +#| "info about trusted certificates. <literal><host>::CaInfo</literal> " +#| "is the corresponding per-host option. <literal>Verify-Peer</literal> " +#| "boolean suboption determines whether verify server's host certificate " +#| "against trusted certificates or not. <literal><host>::Verify-Peer</" +#| "literal> is the corresponding per-host option. <literal>Verify-Host</" +#| "literal> boolean suboption determines whether verify server's hostname or " +#| "not. <literal><host>::Verify-Host</literal> is the corresponding " +#| "per-host option. <literal>SslCert</literal> determines what certificate " +#| "to use for client authentication. <literal><host>::SslCert</" +#| "literal> is the corresponding per-host option. <literal>SslKey</literal> " +#| "determines what private key to use for client authentication. " +#| "<literal><host>::SslKey</literal> is the corresponding per-host " +#| "option. <literal>SslForceVersion</literal> overrides default SSL version " +#| "to use. Can contain 'TLSv1' or 'SSLv3' string. <literal><host>::" +#| "SslForceVersion</literal> is the corresponding per-host option." msgid "" "<literal>CaInfo</literal> suboption specifies place of file that holds info " -"about trusted certificates. <literal><host>::CaInfo</literal> is " +"about trusted certificates. <literal><host>::CaInfo</literal> is the " "corresponding per-host option. <literal>Verify-Peer</literal> boolean " -"suboption determines whether verify server's host certificate against " -"trusted certificates or not. <literal><host>::Verify-Peer</literal> " -"is corresponding per-host option. <literal>Verify-Host</literal> boolean " -"suboption determines whether verify server's hostname or not. <literal><" -"host>::Verify-Host</literal> is corresponding per-host option. " -"<literal>SslCert</literal> determines what certificate to use for client " -"authentication. <literal><host>::SslCert</literal> is corresponding " -"per-host option. <literal>SslKey</literal> determines what private key to " -"use for client authentication. <literal><host>::SslKey</literal> is " -"corresponding per-host option. <literal>SslForceVersion</literal> overrides " -"default SSL version to use. Can contain 'TLSv1' or 'SSLv3' string. " -"<literal><host>::SslForceVersion</literal> is corresponding per-host " -"option." +"suboption determines whether or not the server's host certificate should be " +"verified against trusted certificates. <literal><host>::Verify-Peer</" +"literal> is the corresponding per-host option. <literal>Verify-Host</" +"literal> boolean suboption determines whether or not the server's hostname " +"should be verified. <literal><host>::Verify-Host</literal> is the " +"corresponding per-host option. <literal>SslCert</literal> determines what " +"certificate to use for client authentication. <literal><host>::" +"SslCert</literal> is the corresponding per-host option. <literal>SslKey</" +"literal> determines what private key to use for client authentication. " +"<literal><host>::SslKey</literal> is the corresponding per-host " +"option. <literal>SslForceVersion</literal> overrides default SSL version to " +"use. It can contain either of the strings '<literal>TLSv1</literal>' or " +"'<literal>SSLv3</literal>'. <literal><host>::SslForceVersion</" +"literal> is the corresponding per-host option." msgstr "" "<literal>CaInfo</literal> サブオプションは、信頼済み証明書情報の保持場所を指" "定します。<literal><host>::CaInfo</literal> は、対応するホストごとのオ" @@ -4067,23 +4177,39 @@ msgstr "" "host>::SslForceVersion</literal> は、対応するホストごとのオプションです。" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:391 -msgid "" -"FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the standard " -"form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. Per host " -"proxies can also be specified by using the form <literal>ftp::Proxy::<" -"host></literal> with the special keyword <literal>DIRECT</literal> " -"meaning to use no proxies. If no one of the above settings is specified, " -"<envar>ftp_proxy</envar> environment variable will be used. To use a ftp " -"proxy you will have to set the <literal>ftp::ProxyLogin</literal> script in " -"the configuration file. This entry specifies the commands to send to tell " -"the proxy server what to connect to. Please see &configureindex; for an " -"example of how to do this. The substitution variables available are <literal>" -"$(PROXY_USER)</literal> <literal>$(PROXY_PASS)</literal> <literal>" -"$(SITE_USER)</literal> <literal>$(SITE_PASS)</literal> <literal>$(SITE)</" -"literal> and <literal>$(SITE_PORT)</literal> Each is taken from it's " -"respective URI component." +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:432 +#, fuzzy +#| msgid "" +#| "FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the " +#| "standard form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. " +#| "Per host proxies can also be specified by using the form <literal>ftp::" +#| "Proxy::<host></literal> with the special keyword <literal>DIRECT</" +#| "literal> meaning to use no proxies. If no one of the above settings is " +#| "specified, <envar>ftp_proxy</envar> environment variable will be used. To " +#| "use a ftp proxy you will have to set the <literal>ftp::ProxyLogin</" +#| "literal> script in the configuration file. This entry specifies the " +#| "commands to send to tell the proxy server what to connect to. Please see " +#| "&configureindex; for an example of how to do this. The substitution " +#| "variables available are <literal>$(PROXY_USER)</literal> <literal>" +#| "$(PROXY_PASS)</literal> <literal>$(SITE_USER)</literal> <literal>" +#| "$(SITE_PASS)</literal> <literal>$(SITE)</literal> and <literal>" +#| "$(SITE_PORT)</literal> Each is taken from it's respective URI component." +msgid "" +"<literal>ftp::Proxy</literal> sets the default proxy to use for FTP URIs. " +"It is in the standard form of <literal>ftp://[[user][:pass]@]host[:port]/</" +"literal>. Per host proxies can also be specified by using the form " +"<literal>ftp::Proxy::<host></literal> with the special keyword " +"<literal>DIRECT</literal> meaning to use no proxies. If no one of the above " +"settings is specified, <envar>ftp_proxy</envar> environment variable will be " +"used. To use an FTP proxy you will have to set the <literal>ftp::ProxyLogin</" +"literal> script in the configuration file. This entry specifies the commands " +"to send to tell the proxy server what to connect to. Please see " +"&configureindex; for an example of how to do this. The substitution " +"variables representing the corresponding URI component are <literal>" +"$(PROXY_USER)</literal>, <literal>$(PROXY_PASS)</literal>, <literal>" +"$(SITE_USER)</literal>, <literal>$(SITE_PASS)</literal>, <literal>$(SITE)</" +"literal> and <literal>$(SITE_PORT)</literal>." msgstr "" "FTP URI - ftp::Proxy は、デフォルトで使用するプロキシサーバです。" "<literal>ftp://[[user][:pass]@]host[:port]/</literal> という標準形で表しま" @@ -4100,14 +4226,22 @@ msgstr "" "です。いずれも、それぞれ URI を構成するトークンです。" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:410 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:452 +#, fuzzy +#| msgid "" +#| "Several settings are provided to control passive mode. Generally it is " +#| "safe to leave passive mode on; it works in nearly every environment. " +#| "However, some situations require that passive mode be disabled and port " +#| "mode FTP used instead. This can be done globally, for connections that go " +#| "through a proxy or for a specific host (See the sample config file for " +#| "examples)." msgid "" "Several settings are provided to control passive mode. Generally it is safe " -"to leave passive mode on, it works in nearly every environment. However " -"some situations require that passive mode be disabled and port mode ftp used " -"instead. This can be done globally, for connections that go through a proxy " -"or for a specific host (See the sample config file for examples)." +"to leave passive mode on; it works in nearly every environment. However, " +"some situations require that passive mode be disabled and port mode FTP used " +"instead. This can be done globally or for connections that go through a " +"proxy or for a specific host (see the sample config file for examples)." msgstr "" "設定のいくつかは、パッシブモードを制御するものです。一般的に、パッシブモード" "のままにしておく方が安全で、ほぼどんな環境でも動作します。しかしある状況下で" @@ -4116,11 +4250,11 @@ msgstr "" "定例はサンプル設定ファイルを参照してください)。" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:417 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:459 msgid "" "It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</" -"envar> environment variable to a http url - see the discussion of the http " +"envar> environment variable to an HTTP URL - see the discussion of the http " "method above for syntax. You cannot set this in the configuration file and " "it is not recommended to use FTP over HTTP due to its low efficiency." msgstr "" @@ -4130,8 +4264,8 @@ msgstr "" "over HTTP を使用するのは推奨しません。" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:422 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:464 msgid "" "The setting <literal>ForceExtended</literal> controls the use of RFC2428 " "<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is " @@ -4146,24 +4280,34 @@ msgstr "" "このコマンドを使用します。ほとんどの FTP サーバは RFC2428 をサポートしていな" "いことに注意してください。" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:435 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><literallayout> +#: apt.conf.5.xml:478 #, no-wrap msgid "/cdrom/::Mount \"foo\";" msgstr "/cdrom/::Mount \"foo\";" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:430 -msgid "" -"CD-ROM URIs; the only setting for CD-ROM URIs is the mount point, " -"<literal>cdrom::Mount</literal> which must be the mount point for the CD-ROM " -"drive as specified in <filename>/etc/fstab</filename>. It is possible to " -"provide alternate mount and unmount commands if your mount point cannot be " -"listed in the fstab (such as an SMB mount and old mount packages). The " +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:473 +#, fuzzy +#| msgid "" +#| "CD-ROM URIs; the only setting for CD-ROM URIs is the mount point, " +#| "<literal>cdrom::Mount</literal> which must be the mount point for the CD-" +#| "ROM drive as specified in <filename>/etc/fstab</filename>. It is possible " +#| "to provide alternate mount and unmount commands if your mount point " +#| "cannot be listed in the fstab (such as an SMB mount and old mount " +#| "packages). The syntax is to put <placeholder type=\"literallayout\" id=" +#| "\"0\"/> within the cdrom block. It is important to have the trailing " +#| "slash. Unmount commands can be specified using UMount." +msgid "" +"For URIs using the <literal>cdrom</literal> method, the only configurable " +"option is the mount point, <literal>cdrom::Mount</literal>, which must be " +"the mount point for the CD-ROM (or DVD, or whatever) drive as specified in " +"<filename>/etc/fstab</filename>. It is possible to provide alternate mount " +"and unmount commands if your mount point cannot be listed in the fstab. The " "syntax is to put <placeholder type=\"literallayout\" id=\"0\"/> within the " -"cdrom block. It is important to have the trailing slash. Unmount commands " -"can be specified using UMount." +"<literal>cdrom</literal> block. It is important to have the trailing slash. " +"Unmount commands can be specified using UMount." msgstr "" "CD-ROM URI - CD-ROM URI はマウントポイントの設定のみを行います。<filename>/" "etc/fstab</filename> で設定されているように、CD-ROM ドライブのマウントポイン" @@ -4175,31 +4319,35 @@ msgstr "" "できます。" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:441 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:486 +#, fuzzy +#| msgid "" +#| "GPGV URIs; the only option for GPGV URIs is the option to pass additional " +#| "parameters to gpgv. <literal>gpgv::Options</literal> Additional options " +#| "passed to gpgv." msgid "" -"GPGV URIs; the only option for GPGV URIs is the option to pass additional " -"parameters to gpgv. <literal>gpgv::Options</literal> Additional options " -"passed to gpgv." +"For GPGV URIs the only configurable option is <literal>gpgv::Options</" +"literal>, which passes additional parameters to gpgv." msgstr "" "GPGV URI - GPGV URI 用の唯一のオプションは、gpgv に渡す追加パラメータのオプ" "ションです。<literal>gpgv::Options</literal> が gpgv に渡す追加オプションで" "す。" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:452 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis> +#: apt.conf.5.xml:497 #, no-wrap msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";" msgstr "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:447 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:492 msgid "" "List of compression types which are understood by the acquire methods. " "Files like <filename>Packages</filename> can be available in various " -"compression formats. Per default the acquire methods can decompress " +"compression formats. By default the acquire methods can decompress " "<command>bzip2</command>, <command>lzma</command> and <command>gzip</" -"command> compressed files, with this setting more formats can be added on " +"command> compressed files; with this setting more formats can be added on " "the fly or the used method can be changed. The syntax for this is: " "<placeholder type=\"synopsis\" id=\"0\"/>" msgstr "" @@ -4210,33 +4358,49 @@ msgstr "" "り多くの形式を、オンザフライで追加したり、使用するメソッドで変更したりできま" "す。構文は以下のようになります。<placeholder type=\"synopsis\" id=\"0\"/>" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:457 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis> +#: apt.conf.5.xml:502 #, no-wrap msgid "Acquire::CompressionTypes::Order:: \"gz\";" msgstr "Acquire::CompressionTypes::Order:: \"gz\";" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:460 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis> +#: apt.conf.5.xml:505 #, no-wrap msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" msgstr "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:453 -msgid "" -"Also the <literal>Order</literal> subgroup can be used to define in which " +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:498 +#, fuzzy +#| msgid "" +#| "Also, the <literal>Order</literal> subgroup can be used to define in " +#| "which order the acquire system will try to download the compressed files. " +#| "The acquire system will try the first and proceed with the next " +#| "compression type in this list on error, so to prefer one over the other " +#| "type simply add the preferred type first - not already added default " +#| "types will be added at run time to the end of the list, so e.g. " +#| "<placeholder type=\"synopsis\" id=\"0\"/> can be used to prefer " +#| "<command>gzip</command> compressed files over <command>bzip2</command> " +#| "and <command>lzma</command>. If <command>lzma</command> should be " +#| "preferred over <command>gzip</command> and <command>bzip2</command> the " +#| "configure setting should look like this <placeholder type=\"synopsis\" id=" +#| "\"1\"/> It is not needed to add <literal>bz2</literal> explicit to the " +#| "list as it will be added automatic." +msgid "" +"Also, the <literal>Order</literal> subgroup can be used to define in which " "order the acquire system will try to download the compressed files. The " "acquire system will try the first and proceed with the next compression type " -"in this list on error, so to prefer one over the other type simple add the " -"preferred type at first - not already added default types will be added at " -"run time to the end of the list, so e.g. <placeholder type=\"synopsis\" id=" +"in this list on error, so to prefer one over the other type simply add the " +"preferred type first - default types not already added will be implicitly " +"appended to the end of the list, so e.g. <placeholder type=\"synopsis\" id=" "\"0\"/> can be used to prefer <command>gzip</command> compressed files over " "<command>bzip2</command> and <command>lzma</command>. If <command>lzma</" "command> should be preferred over <command>gzip</command> and " -"<command>bzip2</command> the configure setting should look like this " +"<command>bzip2</command> the configure setting should look like this: " "<placeholder type=\"synopsis\" id=\"1\"/> It is not needed to add " -"<literal>bz2</literal> explicit to the list as it will be added automatic." +"<literal>bz2</literal> to the list explicitly as it will be added " +"automatically." msgstr "" "また、<literal>Order</literal> サブグループを使用して、取得システムが圧縮ファ" "イルのダウンロードを試みる順番を、定義できます。取得システムは先頭のものを試" @@ -4250,14 +4414,14 @@ msgstr "" "設定を以下のようにしてください。<placeholder type=\"synopsis\" id=\"1\"/> " "<literal>bz2</literal> は自動的に追加されるため、明示する必要はありません。" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:464 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><literallayout> +#: apt.conf.5.xml:512 #, no-wrap msgid "Dir::Bin::bzip2 \"/bin/bzip2\";" msgstr "Dir::Bin::bzip2 \"/bin/bzip2\";" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:462 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:507 #, fuzzy #| msgid "" #| "Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</" @@ -4268,19 +4432,19 @@ msgstr "Dir::Bin::bzip2 \"/bin/bzip2\";" #| "end of the list specified in the configuration files, but before the " #| "default entries. To prefer a type in this case over the ones specified in " #| "in the configuration files you can set the option direct - not in list " -#| "style. This will not override the defined list, it will only prefix the " +#| "style. This will not override the defined list; it will only prefix the " #| "list with this type." msgid "" -"Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</" -"replaceable></literal> will be checked: If this setting exists the method " -"will only be used if this file exists, e.g. for the bzip2 method (the " -"inbuilt) setting is: <placeholder type=\"literallayout\" id=\"0\"/> Note " -"also that list entries specified on the command line will be added at the " -"end of the list specified in the configuration files, but before the default " -"entries. To prefer a type in this case over the ones specified in the " -"configuration files you can set the option direct - not in list style. This " -"will not override the defined list, it will only prefix the list with this " -"type." +"Note that the <literal>Dir::Bin::<replaceable>Methodname</replaceable></" +"literal> will be checked at run time. If this option has been set, the " +"method will only be used if this file exists; e.g. for the <literal>bzip2</" +"literal> method (the inbuilt) setting is: <placeholder type=\"literallayout" +"\" id=\"0\"/> Note also that list entries specified on the command line will " +"be added at the end of the list specified in the configuration files, but " +"before the default entries. To prefer a type in this case over the ones " +"specified in the configuration files you can set the option direct - not in " +"list style. This will not override the defined list; it will only prefix " +"the list with this type." msgstr "" "実行時に <literal>Dir::Bin::<replaceable>Methodname</replaceable></literal> " "をチェックすることに注意してください。この設定があると、ファイルがある場合" @@ -4292,16 +4456,16 @@ msgstr "" "ださい。これにより定義された一覧が上書きされ、このタイプのもののみ定義されま" "す。" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:469 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:517 msgid "" "The special type <literal>uncompressed</literal> can be used to give " "uncompressed files a preference, but note that most archives don't provide " "uncompressed files so this is mostly only useable for local mirrors." msgstr "" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:476 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:524 msgid "" "When downloading <literal>gzip</literal> compressed indexes (Packages, " "Sources, or Translations), keep them gzip compressed locally instead of " @@ -4309,50 +4473,48 @@ msgid "" "CPU requirements when building the local package caches. False by default." msgstr "" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:484 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:532 msgid "" "The Languages subsection controls which <filename>Translation</filename> " -"files are downloaded and in which order APT tries to display the Description-" -"Translations. APT will try to display the first available Description in the " -"Language which is listed at first. Languages can be defined with their short " -"or long Languagecodes. Note that not all archives provide " -"<filename>Translation</filename> files for every Language - especially the " -"long Languagecodes are rare, so please inform you which ones are available " -"before you set here impossible values." +"files are downloaded and in which order APT tries to display the description-" +"translations. APT will try to display the first available description in the " +"language which is listed first. Languages can be defined with their short or " +"long language codes. Note that not all archives provide " +"<filename>Translation</filename> files for every language - the long " +"language codes are especially rare." msgstr "" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><programlisting> -#: apt.conf.5.xml:500 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><programlisting> +#: apt.conf.5.xml:549 #, no-wrap msgid "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; };" msgstr "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; };" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:490 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:537 msgid "" "The default list includes \"environment\" and \"en\". " -"\"<literal>environment</literal>\" has a special meaning here: It will be " -"replaced at runtime with the languagecodes extracted from the " +"\"<literal>environment</literal>\" has a special meaning here: it will be " +"replaced at runtime with the language codes extracted from the " "<literal>LC_MESSAGES</literal> environment variable. It will also ensure " "that these codes are not included twice in the list. If " "<literal>LC_MESSAGES</literal> is set to \"C\" only the " "<filename>Translation-en</filename> file (if available) will be used. To " -"force apt to use no Translation file use the setting <literal>Acquire::" +"force APT to use no Translation file use the setting <literal>Acquire::" "Languages=none</literal>. \"<literal>none</literal>\" is another special " -"meaning code which will stop the search for a fitting <filename>Translation</" -"filename> file. This can be used by the system administrator to let APT " -"know that it should download also this files without actually use them if " -"the environment doesn't specify this languages. So the following example " -"configuration will result in the order \"en, de\" in an english and in \"de, " -"en\" in a german localization. Note that \"fr\" is downloaded, but not used " -"if APT is not used in a french localization, in such an environment the " -"order would be \"fr, de, en\". <placeholder type=\"programlisting\" id=" -"\"0\"/>" +"meaning code which will stop the search for a suitable " +"<filename>Translation</filename> file. This tells APT to download these " +"translations too, without actually using them unless the environment " +"specifies the languages. So the following example configuration will result " +"in the order \"en, de\" in an English locale or \"de, en\" in a German one. " +"Note that \"fr\" is downloaded, but not used unless APT is used in a French " +"locale (where the order would be \"fr, de, en\"). <placeholder type=" +"\"programlisting\" id=\"0\"/>" msgstr "" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:501 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:550 msgid "" "Note: To prevent problems resulting from APT being executed in different " "environments (e.g. by different users or by other programs) all Translation " @@ -4362,49 +4524,60 @@ msgstr "" # type: Content of: <refentry><refsect1><refsect2><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:512 +#: apt.conf.5.xml:560 msgid "Directories" msgstr "ディレクトリ" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:514 +#: apt.conf.5.xml:562 #, fuzzy #| msgid "" #| "The <literal>Dir::State</literal> section has directories that pertain to " #| "local state information. <literal>lists</literal> is the directory to " #| "place downloaded package lists in and <literal>status</literal> is the " -#| "name of the dpkg status file. <literal>preferences</literal> is the name " -#| "of the APT preferences file. <literal>Dir::State</literal> contains the " -#| "default directory to prefix on all sub items if they do not start with " -#| "<filename>/</filename> or <filename>./</filename>." +#| "name of the &dpkg; status file. <literal>preferences</literal> is the " +#| "name of the APT preferences file. <literal>Dir::State</literal> contains " +#| "the default directory to prefix on all sub-items if they do not start " +#| "with <filename>/</filename> or <filename>./</filename>." msgid "" "The <literal>Dir::State</literal> section has directories that pertain to " "local state information. <literal>lists</literal> is the directory to place " "downloaded package lists in and <literal>status</literal> is the name of the " -"dpkg status file. <literal>preferences</literal> is the name of the APT " +"&dpkg; status file. <literal>preferences</literal> is the name of the APT " "<filename>preferences</filename> file. <literal>Dir::State</literal> " -"contains the default directory to prefix on all sub items if they do not " +"contains the default directory to prefix on all sub-items if they do not " "start with <filename>/</filename> or <filename>./</filename>." msgstr "" "<literal>Dir::State</literal> セクションは、ローカル状態情報に関するディレク" "トリを保持します。<literal>lists</literal> は、ダウンロードしたパッケージ一覧" -"を格納するディレクトリで、<literal>status</literal> は dpkg の状態ファイルの" -"名前を表します。<literal>preferences</literal> は APT の 設定ファイルの名前で" -"す。<literal>Dir::State</literal> には、<filename>/</filename> や " +"を格納するディレクトリで、<literal>status</literal> は &dpkg; の状態ファイル" +"の名前を表します。<literal>preferences</literal> は APT の 設定ファイルの名前" +"です。<literal>Dir::State</literal> には、<filename>/</filename> や " "<filename>./</filename> で始まらないサブアイテムすべてに、前に付加するデフォ" "ルトディレクトリを含んでいます。" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:521 +#: apt.conf.5.xml:569 +#, fuzzy +#| msgid "" +#| "<literal>Dir::Cache</literal> contains locations pertaining to local " +#| "cache information, such as the two package caches <literal>srcpkgcache</" +#| "literal> and <literal>pkgcache</literal> as well as the location to place " +#| "downloaded archives, <literal>Dir::Cache::archives</literal>. Generation " +#| "of caches can be turned off by setting their names to be blank. This will " +#| "slow down startup but save disk space. It is probably preferable to turn " +#| "off the pkgcache rather than the srcpkgcache. Like <literal>Dir::State</" +#| "literal> the default directory is contained in <literal>Dir::Cache</" +#| "literal>" msgid "" "<literal>Dir::Cache</literal> contains locations pertaining to local cache " "information, such as the two package caches <literal>srcpkgcache</literal> " "and <literal>pkgcache</literal> as well as the location to place downloaded " "archives, <literal>Dir::Cache::archives</literal>. Generation of caches can " -"be turned off by setting their names to be blank. This will slow down " -"startup but save disk space. It is probably preferred to turn off the " +"be turned off by setting their names to the empty string. This will slow " +"down startup but save disk space. It is probably preferable to turn off the " "pkgcache rather than the srcpkgcache. Like <literal>Dir::State</literal> the " "default directory is contained in <literal>Dir::Cache</literal>" msgstr "" @@ -4419,7 +4592,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:530 +#: apt.conf.5.xml:578 msgid "" "<literal>Dir::Etc</literal> contains the location of configuration files, " "<literal>sourcelist</literal> gives the location of the sourcelist and " @@ -4434,7 +4607,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:536 +#: apt.conf.5.xml:584 msgid "" "The <literal>Dir::Parts</literal> setting reads in all the config fragments " "in lexical order from the directory specified. After this is done then the " @@ -4446,7 +4619,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:540 +#: apt.conf.5.xml:588 msgid "" "Binary programs are pointed to by <literal>Dir::Bin</literal>. <literal>Dir::" "Bin::Methods</literal> specifies the location of the method handlers and " @@ -4464,7 +4637,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:548 +#: apt.conf.5.xml:596 msgid "" "The configuration item <literal>RootDir</literal> has a special meaning. If " "set, all paths in <literal>Dir::</literal> will be relative to " @@ -4484,7 +4657,7 @@ msgstr "" "<filename>/tmp/staging/var/lib/dpkg/status</filename> から探します。" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:561 +#: apt.conf.5.xml:609 msgid "" "The <literal>Ignore-Files-Silently</literal> list can be used to specify " "which files APT should silently ignore while parsing the files in the " @@ -4496,16 +4669,16 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:570 +#: apt.conf.5.xml:618 msgid "APT in DSelect" msgstr "DSelect での APT" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:572 +#: apt.conf.5.xml:620 msgid "" "When APT is used as a &dselect; method several configuration directives " -"control the default behaviour. These are in the <literal>DSelect</literal> " +"control the default behavior. These are in the <literal>DSelect</literal> " "section." msgstr "" "&dselect; 上で APT を使用する際、<literal>DSelect</literal> セクション以下の" @@ -4513,44 +4686,49 @@ msgstr "" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:577 +#: apt.conf.5.xml:625 msgid "" -"Cache Clean mode; this value may be one of always, prompt, auto, pre-auto " -"and never. always and prompt will remove all packages from the cache after " -"upgrading, prompt (the default) does so conditionally. auto removes only " -"those packages which are no longer downloadable (replaced with a new version " -"for instance). pre-auto performs this action before downloading new " -"packages." +"Cache Clean mode; this value may be one of <literal>always</literal>, " +"<literal>prompt</literal>, <literal>auto</literal>, <literal>pre-auto</" +"literal> and <literal>never</literal>. <literal>always</literal> and " +"<literal>prompt</literal> will remove all packages from the cache after " +"upgrading, <literal>prompt</literal> (the default) does so conditionally. " +"<literal>auto</literal> removes only those packages which are no longer " +"downloadable (replaced with a new version for instance). <literal>pre-auto</" +"literal> performs this action before downloading new packages." msgstr "" -"キャッシュクリーンモード - この値は always, prompt, auto, pre-auto, never の" -"うちひとつを取ります。always と prompt は更新後、全パッケージをキャッシュから" -"削除します。prompt (デフォルト) では条件付きで削除します。auto はダウンロード" -"不能パッケージ (例えば新バージョンで置き換えられたもの) を削除します。pre-" -"auto はこの動作を、新パッケージをダウンロードする直前に行います。" +"キャッシュクリーンモード - この値は <literal>always</literal>, " +"<literal>prompt</literal>, <literal>auto</literal>, <literal>pre-auto</" +"literal>, <literal>never</literal> のうちひとつを取ります。<literal>always</" +"literal> と <literal>prompt</literal> は更新後、全パッケージをキャッシュから" +"削除します。<literal>prompt</literal> (デフォルト) では条件付きで削除します。" +"<literal>auto</literal> はダウンロード不能パッケージ (例えば新バージョンで置" +"き換えられたもの) を削除します。<literal>pre-auto</literal> はこの動作を、新" +"パッケージをダウンロードする直前に行います。" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:586 +#: apt.conf.5.xml:639 msgid "" -"The contents of this variable is passed to &apt-get; as command line options " -"when it is run for the install phase." +"The contents of this variable are passed to &apt-get; as command line " +"options when it is run for the install phase." msgstr "" "この変数の内容は、install 時のコマンドラインオプションと同様に &apt-get; に渡" "されます。" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:591 +#: apt.conf.5.xml:644 msgid "" -"The contents of this variable is passed to &apt-get; as command line options " -"when it is run for the update phase." +"The contents of this variable are passed to &apt-get; as command line " +"options when it is run for the update phase." msgstr "" "この変数の内容は、update 時のコマンドラインオプションと同様に &apt-get; に渡" "されます。" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:596 +#: apt.conf.5.xml:649 msgid "" "If true the [U]pdate operation in &dselect; will always prompt to continue. " "The default is to prompt only on error." @@ -4560,13 +4738,13 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:602 -msgid "How APT calls dpkg" -msgstr "APT が dpkg を呼ぶ方法" +#: apt.conf.5.xml:655 +msgid "How APT calls &dpkg;" +msgstr "APT が &dpkg; を呼ぶ方法" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:603 +#: apt.conf.5.xml:656 msgid "" "Several configuration directives control how APT invokes &dpkg;. These are " "in the <literal>DPkg</literal> section." @@ -4576,22 +4754,22 @@ msgstr "" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:608 +#: apt.conf.5.xml:661 msgid "" -"This is a list of options to pass to dpkg. The options must be specified " +"This is a list of options to pass to &dpkg;. The options must be specified " "using the list notation and each list item is passed as a single argument to " "&dpkg;." msgstr "" -"dpkg に渡すオプションのリストです。オプションは、リスト記法を使用して指定しな" -"ければなりません。また、各リストは単一の引数として &dpkg; に渡されます。" +"&dpkg; に渡すオプションのリストです。オプションは、リスト記法を使用して指定し" +"なければなりません。また、各リストは単一の引数として &dpkg; に渡されます。" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:614 +#: apt.conf.5.xml:667 msgid "" "This is a list of shell commands to run before/after invoking &dpkg;. Like " "<literal>options</literal> this must be specified in list notation. The " -"commands are invoked in order using <filename>/bin/sh</filename>, should any " +"commands are invoked in order using <filename>/bin/sh</filename>; should any " "fail APT will abort." msgstr "" "&dpkg; を呼び出す前後で実行するシェルコマンドのリストです。<literal>options</" @@ -4601,13 +4779,20 @@ msgstr "" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:621 +#: apt.conf.5.xml:674 +#, fuzzy +#| msgid "" +#| "This is a list of shell commands to run before invoking &dpkg;. Like " +#| "<literal>options</literal> this must be specified in list notation. The " +#| "commands are invoked in order using <filename>/bin/sh</filename>; should " +#| "any fail APT will abort. APT will pass to the commands on standard input " +#| "the filenames of all .deb files it is going to install, one per line." msgid "" -"This is a list of shell commands to run before invoking dpkg. Like " +"This is a list of shell commands to run before invoking &dpkg;. Like " "<literal>options</literal> this must be specified in list notation. The " -"commands are invoked in order using <filename>/bin/sh</filename>, should any " -"fail APT will abort. APT will pass to the commands on standard input the " -"filenames of all .deb files it is going to install, one per line." +"commands are invoked in order using <filename>/bin/sh</filename>; should any " +"fail APT will abort. APT will pass the filenames of all .deb files it is " +"going to install to the commands, one per line on standard input." msgstr "" "&dpkg; を呼び出す前に実行するシェルコマンドのリストです。<literal>options</" "literal> のようにリスト記法で指定しなければなりません。コマンドは <filename>/" @@ -4617,7 +4802,7 @@ msgstr "" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:627 +#: apt.conf.5.xml:680 msgid "" "Version 2 of this protocol dumps more information, including the protocol " "version, the APT configuration space and the packages, files and versions " @@ -4633,46 +4818,46 @@ msgstr "" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:635 +#: apt.conf.5.xml:688 msgid "" -"APT chdirs to this directory before invoking dpkg, the default is <filename>/" -"</filename>." +"APT chdirs to this directory before invoking &dpkg;, the default is " +"<filename>/</filename>." msgstr "" -"APT は dpkg を呼び出す前にこのディレクトリに移動します。デフォルトは " +"APT は &dpkg; を呼び出す前にこのディレクトリに移動します。デフォルトは " "<filename>/</filename> です。" # type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:640 +#: apt.conf.5.xml:693 msgid "" -"These options are passed to &dpkg-buildpackage; when compiling packages, the " +"These options are passed to &dpkg-buildpackage; when compiling packages; the " "default is to disable signing and produce all binaries." msgstr "" "これらのオプションは、パッケージのコンパイル時に &dpkg-buildpackage; に渡され" "ます。デフォルトでは署名を無効にし、全バイナリを生成します。" #. type: Content of: <refentry><refsect1><refsect2><title> -#: apt.conf.5.xml:645 +#: apt.conf.5.xml:698 msgid "dpkg trigger usage (and related options)" msgstr "dpkg トリガの使い方 (および関連オプション)" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:646 +#: apt.conf.5.xml:699 msgid "" -"APT can call dpkg in a way so it can make aggressive use of triggers over " -"multiple calls of dpkg. Without further options dpkg will use triggers only " -"in between his own run. Activating these options can therefore decrease the " -"time needed to perform the install / upgrade. Note that it is intended to " -"activate these options per default in the future, but as it changes the way " -"APT calling dpkg drastically it needs a lot more testing. <emphasis>These " -"options are therefore currently experimental and should not be used in " -"productive environments.</emphasis> Also it breaks the progress reporting so " -"all frontends will currently stay around half (or more) of the time in the " -"100% state while it actually configures all packages." +"APT can call &dpkg; in such a way as to let it make aggressive use of " +"triggers over multiple calls of &dpkg;. Without further options &dpkg; will " +"use triggers once each time it runs. Activating these options can therefore " +"decrease the time needed to perform the install or upgrade. Note that it is " +"intended to activate these options per default in the future, but as it " +"drastically changes the way APT calls &dpkg; it needs a lot more testing. " +"<emphasis>These options are therefore currently experimental and should not " +"be used in production environments.</emphasis> It also breaks progress " +"reporting such that all front-ends will currently stay around half (or more) " +"of the time in the 100% state while it actually configures all packages." msgstr "" #. type: Content of: <refentry><refsect1><refsect2><para><literallayout> -#: apt.conf.5.xml:661 +#: apt.conf.5.xml:714 #, no-wrap msgid "" "DPkg::NoTriggers \"true\";\n" @@ -4686,82 +4871,72 @@ msgstr "" "DPkg::TriggersPending \"true\";" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:655 +#: apt.conf.5.xml:708 msgid "" "Note that it is not guaranteed that APT will support these options or that " "these options will not cause (big) trouble in the future. If you have " "understand the current risks and problems with these options, but are brave " -"enough to help testing them create a new configuration file and test a " +"enough to help testing them, create a new configuration file and test a " "combination of options. Please report any bugs, problems and improvements " "you encounter and make sure to note which options you have used in your " -"reports. Asking dpkg for help could also be useful for debugging proposes, " +"reports. Asking &dpkg; for help could also be useful for debugging proposes, " "see e.g. <command>dpkg --audit</command>. A defensive option combination " "would be <placeholder type=\"literallayout\" id=\"0\"/>" msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:668 +#: apt.conf.5.xml:721 msgid "" -"Add the no triggers flag to all dpkg calls (except the ConfigurePending " +"Add the no triggers flag to all &dpkg; calls (except the ConfigurePending " "call). See &dpkg; if you are interested in what this actually means. In " -"short: dpkg will not run the triggers when this flag is present unless it is " -"explicitly called to do so in an extra call. Note that this option exists " -"(undocumented) also in older apt versions with a slightly different meaning: " -"Previously these option only append --no-triggers to the configure calls to " -"dpkg - now apt will add these flag also to the unpack and remove calls." +"short: &dpkg; will not run the triggers when this flag is present unless it " +"is explicitly called to do so in an extra call. Note that this option " +"exists (undocumented) also in older APT versions with a slightly different " +"meaning: Previously these option only append --no-triggers to the configure " +"calls to &dpkg; - now APT will also add this flag to the unpack and remove " +"calls." msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:676 +#: apt.conf.5.xml:729 msgid "" "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " -"and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default " -"value and causes APT to configure all packages explicit. The " -"\"<literal>smart</literal>\" way is it to configure only packages which need " -"to be configured before another package can be unpacked (Pre-Depends) and " -"let the rest configure by dpkg with a call generated by the next option. " -"\"<literal>no</literal>\" on the other hand will not configure anything and " -"totally rely on dpkg for configuration (which will at the moment fail if a " -"Pre-Depends is encountered). Setting this option to another than the all " -"value will implicitly activate also the next option per default as otherwise " -"the system could end in an unconfigured status which could be unbootable!" -msgstr "" - -#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:687 -msgid "" -"If this option is set apt will call <command>dpkg --configure --pending</" -"command> to let dpkg handle all required configurations and triggers. This " -"option is activated automatic per default if the previous option is not set " -"to <literal>all</literal>, but deactivating could be useful if you want to " -"run APT multiple times in a row - e.g. in an installer. In these sceneries " -"you could deactivate this option in all but the last run." +"and \"<literal>no</literal>\". The default value is \"<literal>all</literal>" +"\", which causes APT to configure all packages. The \"<literal>smart</" +"literal>\" way is to configure only packages which need to be configured " +"before another package can be unpacked (Pre-Depends), and let the rest be " +"configured by &dpkg; with a call generated by the ConfigurePending option " +"(see below). On the other hand, \"<literal>no</literal>\" will not configure " +"anything, and totally relies on &dpkg; for configuration (which at the " +"moment will fail if a Pre-Depends is encountered). Setting this option to " +"any value other than <literal>all</literal> will implicitly also activate " +"the next option by default, as otherwise the system could end in an " +"unconfigured and potentially unbootable state." msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:694 +#: apt.conf.5.xml:744 msgid "" -"Useful for <literal>smart</literal> configuration as a package which has " -"pending triggers is not considered as <literal>installed</literal> and dpkg " -"treats them as <literal>unpacked</literal> currently which is a dealbreaker " -"for Pre-Dependencies (see debbugs #526774). Note that this will process all " -"triggers, not only the triggers needed to configure this package." +"If this option is set APT will call <command>dpkg --configure --pending</" +"command> to let &dpkg; handle all required configurations and triggers. This " +"option is activated automatically per default if the previous option is not " +"set to <literal>all</literal>, but deactivating it could be useful if you " +"want to run APT multiple times in a row - e.g. in an installer. In these " +"sceneries you could deactivate this option in all but the last run." msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:700 +#: apt.conf.5.xml:751 msgid "" -"As the configuration can be deferred to be done at the end by dpkg it can be " -"tried to order the unpack series only by critical needs, e.g. by Pre-" -"Depends. Default is true and therefore the \"old\" method of ordering in " -"various steps by everything. While both method were present in earlier APT " -"versions the <literal>OrderCritical</literal> method was unused, so this " -"method is very experimental and needs further improvements before becoming " -"really useful." +"Useful for the <literal>smart</literal> configuration as a package which has " +"pending triggers is not considered as <literal>installed</literal>, and " +"&dpkg; treats them as <literal>unpacked</literal> currently which is a " +"showstopper for Pre-Dependencies (see debbugs #526774). Note that this will " +"process all triggers, not only the triggers needed to configure this package." msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:715 +#: apt.conf.5.xml:764 #, no-wrap msgid "" "OrderList::Score {\n" @@ -4779,31 +4954,31 @@ msgstr "" "};" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:708 +#: apt.conf.5.xml:757 msgid "" -"Essential packages (and there dependencies) should be configured immediately " -"after unpacking. It will be a good idea to do this quite early in the " -"upgrade process as these these configure calls require currently also " -"<literal>DPkg::TriggersPending</literal> which will run quite a few triggers " -"(which maybe not needed). Essentials get per default a high score but the " -"immediate flag is relatively low (a package which has a Pre-Depends is " -"higher rated). These option and the others in the same group can be used to " -"change the scoring. The following example shows the settings with there " -"default values. <placeholder type=\"literallayout\" id=\"0\"/>" +"Essential packages (and their dependencies) should be configured immediately " +"after unpacking. It is a good idea to do this quite early in the upgrade " +"process as these configure calls also currently require <literal>DPkg::" +"TriggersPending</literal> which will run quite a few triggers (which may not " +"be needed). Essentials get per default a high score but the immediate flag " +"is relatively low (a package which has a Pre-Depends is rated higher). " +"These option and the others in the same group can be used to change the " +"scoring. The following example shows the settings with their default " +"values. <placeholder type=\"literallayout\" id=\"0\"/>" msgstr "" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:728 +#: apt.conf.5.xml:777 msgid "Periodic and Archives options" msgstr "Periodic オプションと Archives オプション" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:729 +#: apt.conf.5.xml:778 msgid "" "<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups " -"of options configure behavior of apt periodic updates, which is done by " -"<literal>/etc/cron.daily/apt</literal> script. See header of this script for " -"the brief documentation of these options." +"of options configure behavior of apt periodic updates, which is done by the " +"<literal>/etc/cron.daily/apt</literal> script. See the top of this script " +"for the brief documentation of these options." msgstr "" "オプションの <literal>APT::Periodic</literal> グループと <literal>APT::" "Archives</literal> グループは、<literal>/etc/cron.daily/apt</literal> スクリ" @@ -4812,12 +4987,12 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:737 +#: apt.conf.5.xml:786 msgid "Debug options" msgstr "デバッグオプション" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:739 +#: apt.conf.5.xml:788 msgid "" "Enabling options in the <literal>Debug::</literal> section will cause " "debugging information to be sent to the standard error stream of the program " @@ -4828,7 +5003,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:750 +#: apt.conf.5.xml:799 msgid "" "<literal>Debug::pkgProblemResolver</literal> enables output about the " "decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</" @@ -4839,7 +5014,7 @@ msgstr "" "にします。" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:758 +#: apt.conf.5.xml:807 msgid "" "<literal>Debug::NoLocking</literal> disables all file locking. This can be " "used to run some operations (for instance, <literal>apt-get -s install</" @@ -4850,7 +5025,7 @@ msgstr "" "literal>) を行う場合に使用します。" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:767 +#: apt.conf.5.xml:816 msgid "" "<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each " "time that <literal>apt</literal> invokes &dpkg;." @@ -4862,7 +5037,7 @@ msgstr "" #. motivating example, except I haven't a clue why you'd want #. to do this. #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:775 +#: apt.conf.5.xml:824 msgid "" "<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data " "in CD-ROM IDs." @@ -4871,34 +5046,34 @@ msgstr "" "gainを無効にします。" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:785 +#: apt.conf.5.xml:834 msgid "A full list of debugging options to apt follows." msgstr "以下は apt に対するデバッグオプションのすべてです。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:794 +#: apt.conf.5.xml:843 msgid "" "Print information related to accessing <literal>cdrom://</literal> sources." msgstr "" "<literal>cdrom://</literal> ソースへのアクセスに関する情報を出力します。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:805 +#: apt.conf.5.xml:854 msgid "Print information related to downloading packages using FTP." msgstr "FTP を用いたパッケージのダウンロードに関する情報を出力します。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:816 +#: apt.conf.5.xml:865 msgid "Print information related to downloading packages using HTTP." msgstr "HTTP を用いたパッケージのダウンロードに関する情報を出力します。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:827 +#: apt.conf.5.xml:876 msgid "Print information related to downloading packages using HTTPS." msgstr "HTTPS を用いたパッケージのダウンロードに関する情報を出力します。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:838 +#: apt.conf.5.xml:887 msgid "" "Print information related to verifying cryptographic signatures using " "<literal>gpg</literal>." @@ -4906,7 +5081,7 @@ msgstr "" "<literal>gpg</literal> を用いた暗号署名の検証に関する情報を出力します。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:849 +#: apt.conf.5.xml:898 msgid "" "Output information about the process of accessing collections of packages " "stored on CD-ROMs." @@ -4915,12 +5090,12 @@ msgstr "" "します。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:859 +#: apt.conf.5.xml:908 msgid "Describes the process of resolving build-dependencies in &apt-get;." msgstr "&apt-get; での構築依存関係解決のプロセスを説明します。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:869 +#: apt.conf.5.xml:918 msgid "" "Output each cryptographic hash that is generated by the <literal>apt</" "literal> libraries." @@ -4928,7 +5103,7 @@ msgstr "" "<literal>apt</literal> ライブラリが生成した、暗号化ハッシュを出力します。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:879 +#: apt.conf.5.xml:928 msgid "" "Do not include information from <literal>statfs</literal>, namely the number " "of used and free blocks on the CD-ROM filesystem, when generating an ID for " @@ -4938,7 +5113,7 @@ msgstr "" "システムにある使用済・未使用ブロックの数からの情報を含めないようにします。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:890 +#: apt.conf.5.xml:939 msgid "" "Disable all file locking. For instance, this will allow two instances of " "<quote><literal>apt-get update</literal></quote> to run at the same time." @@ -4947,13 +5122,13 @@ msgstr "" "<quote><literal>apt-get update</literal></quote> を実行できるようになります。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:902 +#: apt.conf.5.xml:951 msgid "Log when items are added to or removed from the global download queue." msgstr "" "グローバルダウンロードキューに対する項目の追加・削除の際にログを出力します。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:912 +#: apt.conf.5.xml:961 msgid "" "Output status messages and errors related to verifying checksums and " "cryptographic signatures of downloaded files." @@ -4962,7 +5137,7 @@ msgstr "" "ジやエラーを出力します。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:922 +#: apt.conf.5.xml:971 msgid "" "Output information about downloading and applying package index list diffs, " "and errors relating to package index list diffs." @@ -4971,7 +5146,7 @@ msgstr "" "します。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:934 +#: apt.conf.5.xml:983 msgid "" "Output information related to patching apt package lists when downloading " "index diffs instead of full indices." @@ -4980,14 +5155,14 @@ msgstr "" "リストへのパッチ適用に関する情報を出力します。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:945 +#: apt.conf.5.xml:994 msgid "" "Log all interactions with the sub-processes that actually perform downloads." msgstr "" "実際のダウンロードを行う際の、サブプロセスとのやりとりをログに出力します。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:956 +#: apt.conf.5.xml:1005 msgid "" "Log events related to the automatically-installed status of packages and to " "the removal of unused packages." @@ -4996,7 +5171,7 @@ msgstr "" "に出力します。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:966 +#: apt.conf.5.xml:1015 msgid "" "Generate debug messages describing which packages are being automatically " "installed to resolve dependencies. This corresponds to the initial auto-" @@ -5011,29 +5186,25 @@ msgstr "" "路に対応しています。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:980 +#: apt.conf.5.xml:1029 msgid "" -"Generate debug messages describing which package is marked as keep/install/" +"Generate debug messages describing which packages are marked as keep/install/" "remove while the ProblemResolver does his work. Each addition or deletion " -"may trigger additional actions; they are shown indented two additional space " -"under the original entry. The format for each line is <literal>MarkKeep</" -"literal>, <literal>MarkDelete</literal> or <literal>MarkInstall</literal> " -"followed by <literal>package-name <a.b.c -> d.e.f | x.y.z> (section)" -"</literal> where <literal>a.b.c</literal> is the current version of the " -"package, <literal>d.e.f</literal> is the version considered for installation " -"and <literal>x.y.z</literal> is a newer version, but not considered for " -"installation (because of a low pin score). The later two can be omitted if " -"there is none or if it is the same version as the installed. " -"<literal>section</literal> is the name of the section the package appears in." +"may trigger additional actions; they are shown indented two additional " +"spaces under the original entry. The format for each line is " +"<literal>MarkKeep</literal>, <literal>MarkDelete</literal> or " +"<literal>MarkInstall</literal> followed by <literal>package-name <a.b.c -" +"> d.e.f | x.y.z> (section)</literal> where <literal>a.b.c</literal> is " +"the current version of the package, <literal>d.e.f</literal> is the version " +"considered for installation and <literal>x.y.z</literal> is a newer version, " +"but not considered for installation (because of a low pin score). The later " +"two can be omitted if there is none or if it is the same as the installed " +"version. <literal>section</literal> is the name of the section the package " +"appears in." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1002 -msgid "Dump the default configuration to standard error on startup." -msgstr "起動時に、標準エラー出力へデフォルト設定を出力します。" - -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1012 +#: apt.conf.5.xml:1050 msgid "" "When invoking &dpkg;, output the precise command line with which it is being " "invoked, with arguments separated by a single space character." @@ -5042,7 +5213,7 @@ msgstr "" "切られます。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1023 +#: apt.conf.5.xml:1061 msgid "" "Output all the data received from &dpkg; on the status file descriptor and " "any errors encountered while parsing it." @@ -5051,7 +5222,7 @@ msgstr "" "を解析中に発生したエラーを出力します。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1034 +#: apt.conf.5.xml:1072 msgid "" "Generate a trace of the algorithm that decides the order in which " "<literal>apt</literal> should pass packages to &dpkg;." @@ -5060,18 +5231,18 @@ msgstr "" "のトレースを生成します。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1046 +#: apt.conf.5.xml:1084 msgid "" "Output status messages tracing the steps performed when invoking &dpkg;." msgstr "&dpkg; を呼び出す際に、実行手順を追跡した状態メッセージを出力します。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1057 +#: apt.conf.5.xml:1095 msgid "Output the priority of each package list on startup." msgstr "起動時の各パッケージの優先度を表示します。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1067 +#: apt.conf.5.xml:1105 msgid "" "Trace the execution of the dependency resolver (this applies only to what " "happens when a complex dependency problem is encountered)." @@ -5080,7 +5251,7 @@ msgstr "" "した場合にのみ、適用されます)。" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1078 +#: apt.conf.5.xml:1116 msgid "" "Display a list of all installed packages with their calculated score used by " "the pkgProblemResolver. The description of the package is the same as " @@ -5088,7 +5259,7 @@ msgid "" msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1090 +#: apt.conf.5.xml:1128 msgid "" "Print information about the vendors read from <filename>/etc/apt/vendors." "list</filename>." @@ -5098,14 +5269,14 @@ msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:1112 apt_preferences.5.xml:545 sources.list.5.xml:211 +#: apt.conf.5.xml:1150 apt_preferences.5.xml:545 sources.list.5.xml:211 #: apt-ftparchive.1.xml:596 msgid "Examples" msgstr "サンプル" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:1113 +#: apt.conf.5.xml:1151 msgid "" "&configureindex; is a configuration file showing example values for all " "possible options." @@ -5116,7 +5287,7 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. ? reading apt.conf #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:1125 +#: apt.conf.5.xml:1163 msgid "&apt-cache;, &apt-config;, &apt-preferences;." msgstr "&apt-cache;, &apt-config;, &apt-preferences;." @@ -5225,7 +5396,7 @@ msgid "" "literal>\" as filename extension and only contain alphanumeric, hyphen (-), " "underscore (_) and period (.) characters. Otherwise APT will print a notice " "that it has ignored a file, unless that file matches a pattern in the " -"<literal>Dir::Ignore-Files-Silently</literal> configuration list - in this " +"<literal>Dir::Ignore-Files-Silently</literal> configuration list - in which " "case it will be silently ignored." msgstr "" "<filename>/etc/apt/preferences.d</filename> ディレクトリにあるファイルは、英" @@ -6564,40 +6735,26 @@ msgstr "&apt-get; &apt-cache; &apt-conf; &sources-list;" msgid "Package resource list for APT" msgstr "APT 用パッケージリソースリスト" -# type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:37 +#: sources.list.5.xml:38 msgid "" -"The package resource list is used to locate archives of the package " -"distribution system in use on the system. At this time, this manual page " -"documents only the packaging system used by the Debian system. This control " -"file is <filename>/etc/apt/sources.list</filename>." +"The source list <filename>/etc/apt/sources.list</filename> is designed to " +"support any number of active sources and a variety of source media. The file " +"lists one source per line, with the most preferred source listed first. The " +"information available from the configured sources is acquired by " +"<command>apt-get update</command> (or by an equivalent command from another " +"APT front-end)." msgstr "" -"このパッケージリソースリストは、システムで使用するパッケージの保管場所を特定" -"するのに使用されます。今回このマニュアルページには、Debian システムで使用する" -"パッケージシステムについてのみ記述します。この制御ファイルは、<filename>/etc/" -"apt/sources.list</filename> にあります。" -# type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:42 -msgid "" -"The source list is designed to support any number of active sources and a " -"variety of source media. The file lists one source per line, with the most " -"preferred source listed first. The format of each line is: <literal>type uri " -"args</literal> The first item, <literal>type</literal> determines the format " -"for <literal>args</literal>. <literal>uri</literal> is a Universal Resource " -"Identifier (URI), which is a superset of the more specific and well-known " -"Universal Resource Locator, or URL. The rest of the line can be marked as a " -"comment by using a #." -msgstr "" -"ソースリストは複数の有効な取得元と、様々な取得メディアをサポートしています。" -"ファイルには 1 行ごと取得元を列挙し、上の方にあるものから使用します。行の" -"フォーマットは、<literal>タイプ uri 引数</literal> となります。先頭の " -"<literal>タイプ</literal> で、<literal>引数</literal> のフォーマットを決定し" -"ます。<literal>uri</literal> は Universal Resource Identifier (URI) で、よく" -"知られた Universal Resource Locator (URL) のスーパーセットです。行の残りに # " -"を付けて、コメントにできます。" +#: sources.list.5.xml:45 +msgid "" +"Each line specifying a source starts with type (e.g. <literal>deb-src</" +"literal>) followed by options and arguments for this type. Individual " +"entries cannot be continued onto a following line. Empty lines are ignored, " +"and a <literal>#</literal> character anywhere on a line marks the remainder " +"of that line as a comment." +msgstr "" # type: Content of: <refentry><refsect1><title> #. type: Content of: <refentry><refsect1><title> @@ -6624,7 +6781,7 @@ msgid "" "digits (0-9), underscore (_), hyphen (-) and period (.) characters. " "Otherwise APT will print a notice that it has ignored a file, unless that " "file matches a pattern in the <literal>Dir::Ignore-Files-Silently</literal> " -"configuration list - in this case it will be silently ignored." +"configuration list - in which case it will be silently ignored." msgstr "" "<filename>/etc/apt/sources.list.d</filename> ディレクトリは、個別ファイルで追" "加 source.list エントリを提供します。フォーマットは、通常の " @@ -6644,7 +6801,7 @@ msgstr "deb タイプと deb-src タイプ" #: sources.list.5.xml:66 #, fuzzy #| msgid "" -#| "The <literal>deb</literal> type describes a typical two-level Debian " +#| "The <literal>deb</literal> type references a typical two-level Debian " #| "archive, <filename>distribution/component</filename>. Typically, " #| "<literal>distribution</literal> is generally one of <literal>stable</" #| "literal> <literal>unstable</literal> or <literal>testing</literal> while " @@ -6654,16 +6811,16 @@ msgstr "deb タイプと deb-src タイプ" #| "code in the same form as the <literal>deb</literal> type. A <literal>deb-" #| "src</literal> line is required to fetch source indexes." msgid "" -"The <literal>deb</literal> type describes a typical two-level Debian " -"archive, <filename>distribution/component</filename>. Typically, " -"<literal>distribution</literal> is generally an archivename like " +"The <literal>deb</literal> type references a typical two-level Debian " +"archive, <filename>distribution/component</filename>. The " +"<literal>distribution</literal> is generally an archive name like " "<literal>stable</literal> or <literal>testing</literal> or a codename like " "<literal>&stable-codename;</literal> or <literal>&testing-codename;</" -"literal> while component is one of <literal>main</literal> <literal>contrib</" -"literal> or <literal>non-free</literal>. The <literal>deb-src</literal> type " -"describes a debian distribution's source code in the same form as the " -"<literal>deb</literal> type. A <literal>deb-src</literal> line is required " -"to fetch source indexes." +"literal> while component is one of <literal>main</literal>, " +"<literal>contrib</literal> or <literal>non-free</literal>. The <literal>deb-" +"src</literal> type references a Debian distribution's source code in the " +"same form as the <literal>deb</literal> type. A <literal>deb-src</literal> " +"line is required to fetch source indexes." msgstr "" "<literal>deb</literal> タイプでは典型的な 2 段階の Debian アーカイブ " "<filename>distribution/component</filename> を記述します。よくあるケースで" @@ -6696,39 +6853,58 @@ msgstr "deb uri distribution [component1] [component2] [...]" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> #: sources.list.5.xml:83 +#, fuzzy +#| msgid "" +#| "The URI for the <literal>deb</literal> type must specify the base of the " +#| "Debian distribution, from which APT will find the information it needs. " +#| "<literal>distribution</literal> can specify an exact path, in which case " +#| "the components must be omitted and <literal>distribution</literal> must " +#| "end with a slash (<literal>/</literal>). This is useful for the case when " +#| "only a particular sub-section of the archive denoted by the URI is of " +#| "interest. If <literal>distribution</literal> does not specify an exact " +#| "path, at least one <literal>component</literal> must be present." msgid "" "The URI for the <literal>deb</literal> type must specify the base of the " "Debian distribution, from which APT will find the information it needs. " "<literal>distribution</literal> can specify an exact path, in which case the " "components must be omitted and <literal>distribution</literal> must end with " -"a slash (/). This is useful for when the case only a particular sub-section " -"of the archive denoted by the URI is of interest. If <literal>distribution</" -"literal> does not specify an exact path, at least one <literal>component</" -"literal> must be present." +"a slash (<literal>/</literal>). This is useful for the case when only a " +"particular sub-section of the archive denoted by the URI is of interest. If " +"<literal>distribution</literal> does not specify an exact path, at least one " +"<literal>component</literal> must be present." msgstr "" "<literal>deb</literal> タイプの URI は、APT が必要な情報を見つけられるよう" "に、Debian ディストリビューションの基底を指定しなければなりません。" "<literal>distribution</literal> には正確なパスを指定できます。その場合 " -"component を省略し、<literal>distribution</literal> はスラッシュ (/) で終わら" -"なくてはなりません。これは URL で指定されたアーカイブの、特定のサブセクション" -"のみに関心があるときに役に立ちます。<literal>distribution</literal> に正確な" -"パスを指定しないのなら、少なくともひとつは <literal>component</literal> を指" -"定しなければなりません。" +"component を省略し、<literal>distribution</literal> はスラッシュ (<literal>/" +"</literal>) で終わらなくてはなりません。これは URL で指定されたアーカイブの、" +"特定のサブセクションのみに関心があるときに役に立ちます。" +"<literal>distribution</literal> に正確なパスを指定しないのなら、少なくともひ" +"とつは <literal>component</literal> を指定しなければなりません。" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> #: sources.list.5.xml:92 +#, fuzzy +#| msgid "" +#| "<literal>distribution</literal> may also contain a variable, <literal>" +#| "$(ARCH)</literal> which expands to the Debian architecture (i386, amd64, " +#| "powerpc, ...) used on the system. This permits architecture-independent " +#| "<filename>sources.list</filename> files to be used. In general this is " +#| "only of interest when specifying an exact path, <literal>APT</literal> " +#| "will automatically generate a URI with the current architecture otherwise." msgid "" "<literal>distribution</literal> may also contain a variable, <literal>$(ARCH)" -"</literal> which expands to the Debian architecture (i386, m68k, " -"powerpc, ...) used on the system. This permits architecture-independent " -"<filename>sources.list</filename> files to be used. In general this is only " -"of interest when specifying an exact path, <literal>APT</literal> will " -"automatically generate a URI with the current architecture otherwise." +"</literal> which expands to the Debian architecture (such as <literal>amd64</" +"literal> or <literal>armel</literal>) used on the system. This permits " +"architecture-independent <filename>sources.list</filename> files to be used. " +"In general this is only of interest when specifying an exact path, " +"<literal>APT</literal> will automatically generate a URI with the current " +"architecture otherwise." msgstr "" "<literal>distribution</literal> は、<literal>$(ARCH)</literal> 変数を含む場合" "があります。<literal>$(ARCH)</literal> 変数は、システムで使用している Debian " -"アーキテクチャ (i386, m68k, powerpc, ...) に展開されます。これにより、アーキ" +"アーキテクチャ (i386, amd64, powerpc, ...) に展開されます。これにより、アーキ" "テクチャに依存しない <filename>sources.list</filename> ファイルを使用できま" "す。一般的に、これは正しいパスを指定するときに気にするだけです。そうでない場" "合は、<literal>APT</literal> は現在のアーキテクチャで URI を自動的に生成しま" @@ -6761,12 +6937,12 @@ msgstr "" #. type: Content of: <refentry><refsect1><para> #: sources.list.5.xml:112 msgid "" -"<literal>options</literal> is always optional and needs to be surounded by " +"<literal>options</literal> is always optional and needs to be surrounded by " "square brackets. It can consist of multiple settings in the form " "<literal><replaceable>setting</replaceable>=<replaceable>value</" "replaceable></literal>. Multiple settings are separated by spaces. The " -"following settings are supported by APT, note though that unsupported " -"settings will be ignored silently:" +"following settings are supported by APT (note however that unsupported " +"settings will be ignored silently):" msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> @@ -6774,7 +6950,7 @@ msgstr "" msgid "" "<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</" "replaceable>,…</literal> can be used to specify for which architectures " -"packages information should be downloaded. If this option is not set all " +"information should be downloaded. If this option is not set all " "architectures defined by the <literal>APT::Architectures</literal> option " "will be downloaded." msgstr "" @@ -6877,13 +7053,23 @@ msgstr "" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #: sources.list.5.xml:172 +#, fuzzy +#| msgid "" +#| "The ftp scheme specifies an FTP server for the archive. APT's FTP " +#| "behavior is highly configurable; for more information see the &apt-conf; " +#| "manual page. Please note that a ftp proxy can be specified by using the " +#| "<envar>ftp_proxy</envar> environment variable. It is possible to specify " +#| "a http proxy (http proxy servers often understand ftp urls) using this " +#| "method and ONLY this method. ftp proxies using http specified in the " +#| "configuration file will be ignored." msgid "" "The ftp scheme specifies an FTP server for the archive. APT's FTP behavior " "is highly configurable; for more information see the &apt-conf; manual page. " -"Please note that a ftp proxy can be specified by using the <envar>ftp_proxy</" -"envar> environment variable. It is possible to specify a http proxy (http " -"proxy servers often understand ftp urls) using this method and ONLY this " -"method. ftp proxies using http specified in the configuration file will be " +"Please note that an FTP proxy can be specified by using the " +"<envar>ftp_proxy</envar> environment variable. It is possible to specify an " +"HTTP proxy (HTTP proxy servers often understand FTP URLs) using this " +"environment variable and <emphasis>ONLY</emphasis> this environment " +"variable. Proxies using HTTP specified in the configuration file will be " "ignored." msgstr "" "ftp スキームは、アーカイブに FTP サーバを指定します。APT の FTP の振る舞い" @@ -6896,11 +7082,18 @@ msgstr "" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: sources.list.5.xml:183 +#: sources.list.5.xml:184 +#, fuzzy +#| msgid "" +#| "The copy scheme is identical to the file scheme except that packages are " +#| "copied into the cache directory instead of used directly at their " +#| "location. This is useful for people using a zip disk to copy files " +#| "around with APT." msgid "" "The copy scheme is identical to the file scheme except that packages are " "copied into the cache directory instead of used directly at their location. " -"This is useful for people using a zip disk to copy files around with APT." +"This is useful for people using removable media to copy files around with " +"APT." msgstr "" "copy スキームは、file スキームと同様ですが、パッケージをその場で使用せず、" "キャッシュディレクトリにコピーするところが違います。zip ディスクを使用してい" @@ -6908,13 +7101,19 @@ msgstr "" # type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: sources.list.5.xml:190 +#: sources.list.5.xml:191 +#, fuzzy +#| msgid "" +#| "The rsh/ssh method invokes rsh/ssh to connect to a remote host as a given " +#| "user and access the files. It is a good idea to do prior arrangements " +#| "with RSA keys or rhosts. Access to files on the remote uses standard " +#| "<command>find</command> and <command>dd</command> commands to perform the " +#| "file transfers from the remote." msgid "" -"The rsh/ssh method invokes rsh/ssh to connect to a remote host as a given " -"user and access the files. It is a good idea to do prior arrangements with " -"RSA keys or rhosts. Access to files on the remote uses standard " -"<command>find</command> and <command>dd</command> commands to perform the " -"file transfers from the remote." +"The rsh/ssh method invokes RSH/SSH to connect to a remote host and access " +"the files as a given user. Prior configuration of rhosts or RSA keys is " +"recommended. The standard <command>find</command> and <command>dd</command> " +"commands are used to perform the file transfers from the remote host." msgstr "" "rsh/ssh メソッドは、与えられたユーザでリモートホストに接続し、ファイルにアク" "セスするのに rsh/ssh を使用します。あらかじめ RSA キーや rhosts の配置してお" @@ -6932,12 +7131,12 @@ msgstr "さらに認識できる URI タイプ" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #: sources.list.5.xml:200 msgid "" -"APT can be extended with more methods shipped in other optional packages " -"which should follow the nameing scheme <package>apt-transport-" -"<replaceable>method</replaceable></package>. The APT team e.g. maintains " -"also the <package>apt-transport-https</package> package which provides " -"access methods for https-URIs with features similar to the http method, but " -"other methods for using e.g. debtorrent are also available, see &apt-" +"APT can be extended with more methods shipped in other optional packages, " +"which should follow the naming scheme <package>apt-transport-" +"<replaceable>method</replaceable></package>. For instance, the APT team " +"also maintains the package <package>apt-transport-https</package>, which " +"provides access methods for HTTPS URIs with features similar to the http " +"method. Methods for using e.g. debtorrent are also available - see &apt-" "transport-debtorrent;." msgstr "" @@ -7199,7 +7398,10 @@ msgstr "" # type: Content of: <refentry><refsect1><para> #. type: Content of: <refentry><refsect1><para> #: apt-sortpkgs.1.xml:45 -msgid "All output is sent to stdout, the input must be a seekable file." +#, fuzzy +#| msgid "All output is sent to stdout, the input must be a seekable file." +msgid "" +"All output is sent to standard output; the input must be a seekable file." msgstr "" "出力はすべて標準出力に送られ、入力は検索できるファイルでなければなりません。" @@ -9566,6 +9768,95 @@ msgstr " # apt-get -o dir::cache::archives=\"/disc/\" dist-upgrade" msgid "Which will use the already fetched archives on the disc." msgstr "これで、disc にある取得済みのアーカイブを使用するようになります。" +#~ msgid "Dump the default configuration to standard error on startup." +#~ msgstr "起動時に、標準エラー出力へデフォルト設定を出力します。" + +#~ msgid "" +#~ "Defaults to on which will cause APT to install essential and important " +#~ "packages as fast as possible in the install/upgrade operation. This is " +#~ "done to limit the effect of a failing &dpkg; call: If this option is " +#~ "disabled APT does treat an important package in the same way as an extra " +#~ "package: Between the unpacking of the important package A and his " +#~ "configuration can then be many other unpack or configuration calls, e.g. " +#~ "for package B which has no relation to A, but causes the dpkg call to " +#~ "fail (e.g. because maintainer script of package B generates an error) " +#~ "which results in a system state in which package A is unpacked but " +#~ "unconfigured - each package depending on A is now no longer guaranteed to " +#~ "work as their dependency on A is not longer satisfied. The immediate " +#~ "configuration marker is also applied to all dependencies which can " +#~ "generate a problem if the dependencies e.g. form a circle as a dependency " +#~ "with the immediate flag is comparable with a Pre-Dependency. So in theory " +#~ "it is possible that APT encounters a situation in which it is unable to " +#~ "perform immediate configuration, errors out and refers to this option so " +#~ "the user can deactivate the immediate configuration temporarily to be " +#~ "able to perform an install/upgrade again. Note the use of the word " +#~ "\"theory\" here as this problem was only encountered by now in real world " +#~ "a few times in non-stable distribution versions and was caused by wrong " +#~ "dependencies of the package in question or by a system in an already " +#~ "broken state, so you should not blindly disable this option as the " +#~ "mentioned scenario above is not the only problem immediate configuration " +#~ "can help to prevent in the first place. Before a big operation like " +#~ "<literal>dist-upgrade</literal> is run with this option disabled it " +#~ "should be tried to explicitly <literal>install</literal> the package APT " +#~ "is unable to configure immediately, but please make sure to report your " +#~ "problem also to your distribution and to the APT team with the buglink " +#~ "below so they can work on improving or correcting the upgrade process." +#~ msgstr "" +#~ "デフォルトで有効で、インストールやアップグレード処理中に、APT が不可欠パッ" +#~ "ケージや重要パッケージのインストールを、可能な限り早く行うようになります。" +#~ "&dpkg; の呼び出す際の失敗回数に制限があるため、このようなオプションがあり" +#~ "ます。このオプションが無効の場合、APT は重要パッケージを、特別パッケージと" +#~ "同様に扱うようになります。重要パッケージ A を展開していて、その設定中に他" +#~ "の展開や設定をたくさん呼び出すと、パッケージ B は A とはなんの関係もないに" +#~ "もかかわらず、dpkg の呼び出しが失敗します (つまり B のメンテナスクリプトが" +#~ "エラーを返します)。この結果、システムの状態として、パッケージ A は展開済み" +#~ "で未設定となります。A に依存するパッケージは、動作の保証がなくなり、A に対" +#~ "する依存関係は、もう満たせなくなります。 即時設定マーカは、たとえば環状の" +#~ "依存関係といった問題が発生しそうな、すべての依存関係に先行依存と同等の即時" +#~ "フラグを適用します。そのため理論上では、APT が即時設定できない、エラーが発" +#~ "生する、このオプションを参照するといった状況になる可能性があるのは、ユーザ" +#~ "が即時設定を一時的に無効にして、インストールやアップグレードを行った場合で" +#~ "す。「理論上」と言う単語を使ったのは、現在現実世界でこの問題に遭遇したの" +#~ "は、不安定版を使用しており、問題になっていたパッケージの間違った依存関係が" +#~ "原因だったり、システムが既に破損状態であったりした数回だけだからです。前述" +#~ "のシナリオが、即時設定が主に回避する問題のすべてというわけではないため、こ" +#~ "のオプションを闇雲に無効にするべきではありません。<literal>dist-upgrade</" +#~ "literal> のような大きな操作を、このオプションを無効にして行う前に、APT が" +#~ "すぐに設定できないパッケージを、明示的に <literal>install</literal> してみ" +#~ "てください。ですが、アップグレードプロセスの改善のため、バグのリンクにある" +#~ "ディストリビューションと APT チームにも、問題のレポートをおねがいします。" + +# type: Content of: <refentry><refsect1><para> +#~ msgid "" +#~ "The package resource list is used to locate archives of the package " +#~ "distribution system in use on the system. At this time, this manual page " +#~ "documents only the packaging system used by the Debian system. This " +#~ "control file is <filename>/etc/apt/sources.list</filename>." +#~ msgstr "" +#~ "このパッケージリソースリストは、システムで使用するパッケージの保管場所を特" +#~ "定するのに使用されます。今回このマニュアルページには、Debian システムで使" +#~ "用するパッケージシステムについてのみ記述します。この制御ファイルは、" +#~ "<filename>/etc/apt/sources.list</filename> にあります。" + +# type: Content of: <refentry><refsect1><para> +#~ msgid "" +#~ "The source list is designed to support any number of active sources and a " +#~ "variety of source media. The file lists one source per line, with the " +#~ "most preferred source listed first. The format of each line is: " +#~ "<literal>type uri args</literal> The first item, <literal>type</literal> " +#~ "determines the format for <literal>args</literal>. <literal>uri</literal> " +#~ "is a Universal Resource Identifier (URI), which is a superset of the more " +#~ "specific and well-known Universal Resource Locator, or URL. The rest of " +#~ "the line can be marked as a comment by using a #." +#~ msgstr "" +#~ "ソースリストは複数の有効な取得元と、様々な取得メディアをサポートしていま" +#~ "す。ファイルには 1 行ごと取得元を列挙し、上の方にあるものから使用します。" +#~ "行のフォーマットは、<literal>タイプ uri 引数</literal> となります。先頭の " +#~ "<literal>タイプ</literal> で、<literal>引数</literal> のフォーマットを決定" +#~ "します。<literal>uri</literal> は Universal Resource Identifier (URI) で、" +#~ "よく知られた Universal Resource Locator (URL) のスーパーセットです。行の残" +#~ "りに # を付けて、コメントにできます。" + # type: Content of: <refentry><refsect1><para> #~ msgid "&apt-commonoptions;" #~ msgstr "&apt-commonoptions;" |