summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/apt-cache.8.xml2
-rw-r--r--doc/apt-get.8.xml13
-rw-r--r--doc/apt_preferences.5.xml2
-rw-r--r--doc/cache.sgml3
-rw-r--r--doc/dpkg-tech.sgml2
-rw-r--r--doc/examples/configure-index29
-rw-r--r--doc/examples/sources.list12
7 files changed, 53 insertions, 10 deletions
diff --git a/doc/apt-cache.8.xml b/doc/apt-cache.8.xml
index 2779f2501..c1e65332d 100644
--- a/doc/apt-cache.8.xml
+++ b/doc/apt-cache.8.xml
@@ -151,7 +151,7 @@ Reverse Provides:
a dependency but were not provided by any package. Missing packages may
be in evidence if a full distribution is not accessed, or if a package
(real or virtual) has been dropped from the distribution. Usually they
- are referenced from Conflicts statements.</para>
+ are referenced from Conflicts or Breaks statements.</para>
</listitem>
<listitem><para><literal>Total distinct</literal> versions is the number of package versions
diff --git a/doc/apt-get.8.xml b/doc/apt-get.8.xml
index 17f663a35..3c245b83b 100644
--- a/doc/apt-get.8.xml
+++ b/doc/apt-get.8.xml
@@ -47,6 +47,7 @@
<arg>check</arg>
<arg>clean</arg>
<arg>autoclean</arg>
+ <arg>autoremove</arg>
</group>
</cmdsynopsis>
</refsynopsisdiv>
@@ -203,6 +204,11 @@
<literal>APT::Clean-Installed</literal> will prevent installed packages from being
erased if it is set to off.</para></listitem>
</varlistentry>
+
+ <varlistentry><term>autoremove</term>
+ <listitem><para><literal>autoremove</literal> is used to remove packages that were automatically
+ installed to satisfy dependencies for some package and that are no more needed.</para></listitem>
+ </varlistentry>
</variablelist>
</refsect1>
@@ -382,6 +388,13 @@
Configuration Item: <literal>APT::Get::Remove</literal>.</para></listitem>
</varlistentry>
+ <varlistentry><term><option>--auto-remove</option></term>
+ <listitem><para>If the command is either <literal>install</literal> or <literal>remove</literal>,
+ then this option acts like running <literal>autoremove</literal> command, removing the unused
+ dependency packages. Configuration Item: <literal>APT::Get::AutomaticRemove</literal>.
+ </para></listitem>
+ </varlistentry>
+
<varlistentry><term><option>--only-source</option></term>
<listitem><para>Only has meaning for the
<literal>source</literal> and <literal>build-dep</literal>
diff --git a/doc/apt_preferences.5.xml b/doc/apt_preferences.5.xml
index 3e50bef8c..12b03196a 100644
--- a/doc/apt_preferences.5.xml
+++ b/doc/apt_preferences.5.xml
@@ -183,7 +183,7 @@ belonging to any distribution whose Archive name is "<literal>unstable</literal>
<programlisting>
Package: *
Pin: release a=unstable
-Pin-Priority: 50
+Pin-Priority: 500
</programlisting>
<simpara>The following record assigns a high priority to all package versions
diff --git a/doc/cache.sgml b/doc/cache.sgml
index aa87db986..e257dcd81 100644
--- a/doc/cache.sgml
+++ b/doc/cache.sgml
@@ -492,7 +492,7 @@ This is the parsed priority value of the package.
Dependency contains the information for a single dependency record. The records
are split up like this to ease processing by the client. The base of list
linked list is Version.DependsList. All forms of dependencies are recorded
-here including Conflicts, Suggests and Recommends.
+here including Conflicts, Breaks, Suggests and Recommends.
<p>
Multiple depends on the same package must be grouped together in
@@ -671,6 +671,7 @@ of them.
#define pkgDEP_Recommends 4
#define pkgDEP_Conflicts 5
#define pkgDEP_Replaces 6
+#define pkgDEP_Breaks 8
</example>
</sect1>
diff --git a/doc/dpkg-tech.sgml b/doc/dpkg-tech.sgml
index 23372d71f..7c6e023dd 100644
--- a/doc/dpkg-tech.sgml
+++ b/doc/dpkg-tech.sgml
@@ -46,6 +46,8 @@ The basic dpkg package control file supports the following major features:-
productivity of the package
<item>Conflicts, to specify a package which must NOT be installed
in order for the package to be configured
+ <item>Breaks, to specify a package which is broken by the
+ package and which should therefore not be configured while broken
</list>
Each of these dependencies can specify a version and a depedency on that
version, for example "<= 0.5-1", "== 2.7.2-1", etc. The comparators available
diff --git a/doc/examples/configure-index b/doc/examples/configure-index
index c02fe849f..4262b479f 100644
--- a/doc/examples/configure-index
+++ b/doc/examples/configure-index
@@ -24,11 +24,15 @@ APT
{
Architecture "i386";
Build-Essential "build-essential";
-
+
+ NeverAutoRemove { "linux-kernel.*"; }; // packages that should never
+ // considered for autoRemove
+
// Options for apt-get
Get
{
Arch-Only "false";
+ AutomaticRemove "false";
Download-Only "false";
Simulate "false";
Assume-Yes "false";
@@ -90,6 +94,10 @@ APT
Cache-Limit "4194304";
Default-Release "";
+ // consider Recommends, Suggests as important dependencies that should
+ // be installed by default
+ APT::Install-Recommends "false";
+ APT::Install-Suggests "false";
// Write progress messages on this fd (for stuff like base-config)
Status-Fd "-1";
@@ -120,6 +128,18 @@ Acquire
Dl-Limit "7"; // 7Kb/sec maximum download rate
};
+ // HTTPS method configuration:
+ // - uses the http proxy config
+ // - uses the http cache-control values
+ // - uses the http Dl-Limit values
+ https
+ {
+ Verify-Peer "false";
+ SslCert "/etc/apt/some.pem";
+ CaPath "/etc/ssl/certs";
+ Verify-Host" "2";
+ };
+
ftp
{
Proxy "ftp://127.0.0.1/";
@@ -249,6 +269,10 @@ DPkg
// Control the size of the command line passed to dpkg.
MaxBytes 1024;
MaxArgs 350;
+
+ // controls if apt will apport on the first dpkg error or if it
+ // tries to install as many packages as possible
+ StopOnError "true";
}
/* Options you can set to see some debugging text They correspond to names
@@ -263,12 +287,13 @@ Debug
pkgDPkgPM "false";
pkgDPkgProgressReporting "false";
pkgOrderList "false";
+ pkgAutoRemove "false"; // show information about automatic removes
BuildDeps "false";
-
pkgInitialize "false"; // This one will dump the configuration space
NoLocking "false";
Acquire::Ftp "false"; // Show ftp command traffic
Acquire::Http "false"; // Show http command traffic
+ Acquire::Https "false"; // Show https debug
Acquire::gpgv "false"; // Show the gpgv traffic
Acquire::Mirror "false"; // Show debugging of the mirror method
aptcdrom "false"; // Show found package files
diff --git a/doc/examples/sources.list b/doc/examples/sources.list
index 9af1c3c4c..a958899ae 100644
--- a/doc/examples/sources.list
+++ b/doc/examples/sources.list
@@ -1,9 +1,11 @@
# See sources.list(5) for more information, especialy
# Remember that you can only use http, ftp or file URIs
# CDROMs are managed through the apt-cdrom tool.
-deb http://http.us.debian.org/debian stable main contrib non-free
-deb http://security.debian.org stable/updates main contrib non-free
+deb http://us.archive.ubuntu.com/ubuntu dapper main restricted
+deb-src http://us.archive.ubuntu.com/ubuntu dapper main restricted
-# Uncomment if you want the apt-get source function to work
-#deb-src http://http.us.debian.org/debian stable main contrib non-free
-#deb-src http://non-us.debian.org/debian-non-US stable/non-US main contrib non-free
+deb http://security.ubuntu.com/ubuntu dapper-security main restricted
+deb-src http://security.ubuntu.com/ubuntu dapper-security main restricted
+
+deb http://us.archive.ubuntu.com/ubuntu dapper-updates main restricted
+deb-src http://us.archive.ubuntu.com/ubuntu dapper-updates main restricted
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 22:17:32 +0000