diff options
Diffstat (limited to 'po/zh_CN.po')
| -rw-r--r-- | po/zh_CN.po | 3217 |
1 files changed, 1275 insertions, 1942 deletions
diff --git a/po/zh_CN.po b/po/zh_CN.po index b1e523851..9a5a841ba 100644 --- a/po/zh_CN.po +++ b/po/zh_CN.po @@ -10,7 +10,7 @@ msgid "" msgstr "" "Project-Id-Version: apt 0.8.0~pre1\n" "Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n" -"POT-Creation-Date: 2015-04-13 07:23+0200\n" +"POT-Creation-Date: 2015-09-15 14:59+0000\n" "PO-Revision-Date: 2014-12-04 04:42+0000\n" "Last-Translator: Zhou Mo <cdluminate@gmail.com>\n" "Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n" @@ -20,153 +20,580 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -#: cmdline/apt-cache.cc:149 +msgid "Hit " +msgstr "命中 " + +msgid "Get:" +msgstr "获取：" + +msgid "Ign " +msgstr "忽略 " + +msgid "Err " +msgstr "错误 " + +#, c-format +msgid "Fetched %sB in %s (%sB/s)\n" +msgstr "下载 %sB，耗时 %s (%sB/s)\n" + +#, c-format +msgid " [Working]" +msgstr " [执行中]" + +#, c-format +msgid "" +"Media change: please insert the disc labeled\n" +" '%s'\n" +"in the drive '%s' and press enter\n" +msgstr "" +"更换介质：请把标有\n" +"“%s”\n" +"的盘片插入驱动器“%s”再按回车键\n" + +msgid "Correcting dependencies..." +msgstr "正在更正依赖关系..." + +msgid " failed." +msgstr " 失败。" + +msgid "Unable to correct dependencies" +msgstr "无法更正依赖关系" + +msgid "Unable to minimize the upgrade set" +msgstr "无法最小化要升级的软件包集合" + +msgid " Done" +msgstr " 完成" + +msgid "You might want to run 'apt-get -f install' to correct these." +msgstr "您也许需要运行“apt-get -f install”来修正上面的错误。" + +msgid "Unmet dependencies. Try using -f." +msgstr "不能满足依赖关系。不妨试一下 -f 选项。" + +msgid "Sorting" +msgstr "正在排序" + +msgid "WARNING: The following packages cannot be authenticated!" +msgstr "【警告】：下列软件包不能通过验证！" + +msgid "Authentication warning overridden.\n" +msgstr "忽略了认证警告。\n" + +msgid "Some packages could not be authenticated" +msgstr "有些软件包不能通过验证" + +msgid "Install these packages without verification?" +msgstr "不经验证就安装这些软件包吗？" + +msgid "There are problems and -y was used without --force-yes" +msgstr "碰到了一些问题，您使用了 -y 选项，但是没有用 --force-yes" + +#, c-format +msgid "Failed to fetch %s %s\n" +msgstr "无法下载 %s %s\n" + +msgid "Internal error, InstallPackages was called with broken packages!" +msgstr "内部错误，InstallPackages 被用在了无法安装的软件包上！" + +msgid "Packages need to be removed but remove is disabled." +msgstr "有软件包需要被卸载，但是卸载动作被程序设置所禁止。" + +msgid "Internal error, Ordering didn't finish" +msgstr "内部错误，Ordering 未能完成" + +msgid "How odd... The sizes didn't match, email apt@packages.debian.org" +msgstr "怪了……文件大小不符，请发信给 apt@packages.debian.org 吧" + +#. TRANSLATOR: The required space between number and unit is already included +#. in the replacement strings, so %sB will be correctly translate in e.g. 1,5 MB +#, c-format +msgid "Need to get %sB/%sB of archives.\n" +msgstr "需要下载 %sB/%sB 的软件包。\n" + +#. TRANSLATOR: The required space between number and unit is already included +#. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB +#, c-format +msgid "Need to get %sB of archives.\n" +msgstr "需要下载 %sB 的软件包。\n" + +#. TRANSLATOR: The required space between number and unit is already included +#. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB +#, c-format +msgid "After this operation, %sB of additional disk space will be used.\n" +msgstr "解压缩后会消耗掉 %sB 的额外空间。\n" + +#. TRANSLATOR: The required space between number and unit is already included +#. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB +#, c-format +msgid "After this operation, %sB disk space will be freed.\n" +msgstr "解压缩后将会空出 %sB 的空间。\n" + +#, c-format +msgid "Couldn't determine free space in %s" +msgstr "无法获知您在 %s 上的可用空间" + +#, c-format +msgid "You don't have enough free space in %s." +msgstr "您在 %s 上没有足够的可用空间。" + +msgid "Trivial Only specified but this is not a trivial operation." +msgstr "虽然您指定了仅执行常规操作，但这不是个常规操作。" + +#. TRANSLATOR: This string needs to be typed by the user as a confirmation, so be +#. careful with hard to type or special characters (like non-breaking spaces) +msgid "Yes, do as I say!" +msgstr "是，按我说的做！" + +#, c-format +msgid "" +"You are about to do something potentially harmful.\n" +"To continue type in the phrase '%s'\n" +" ?] " +msgstr "" +"您的操作会导致潜在的危害。\n" +"若还想继续的话，就输入下面的短句“%s”\n" +" ?] " + +msgid "Abort." +msgstr "中止执行。" + +msgid "Do you want to continue?" +msgstr "您希望继续执行吗？" + +msgid "Some files failed to download" +msgstr "有一些文件无法下载" + +msgid "Download complete and in download only mode" +msgstr "下载完毕，目前是“仅下载”模式" + +msgid "" +"Unable to fetch some archives, maybe run apt-get update or try with --fix-" +"missing?" +msgstr "" +"有几个软件包无法下载，您可以运行 apt-get update 或者加上 --fix-missing 的选项" +"再试试？" + +msgid "--fix-missing and media swapping is not currently supported" +msgstr "目前还不支持 --fix-missing 和介质交换" + +msgid "Unable to correct missing packages." +msgstr "无法更正缺少的软件包。" + +msgid "Aborting install." +msgstr "中止安装。" + +msgid "" +"The following package disappeared from your system as\n" +"all files have been overwritten by other packages:" +msgid_plural "" +"The following packages disappeared from your system as\n" +"all files have been overwritten by other packages:" +msgstr[0] "以下软件包因为文件已被其他软件包覆盖而消失：" + +msgid "Note: This is done automatically and on purpose by dpkg." +msgstr "注意：这是自动被 dpkg 有意完成的。" + +msgid "We are not supposed to delete stuff, can't start AutoRemover" +msgstr "我们不应该进行删除，无法启动自动删除器" + +msgid "" +"Hmm, seems like the AutoRemover destroyed something which really\n" +"shouldn't happen. Please file a bug report against apt." +msgstr "似乎自动卸载工具损坏了一些软件，这不应该发生。请向 apt 提交错误报告。" + +#. +#. if (Packages == 1) +#. { +#. c1out << std::endl; +#. c1out << +#. _("Since you only requested a single operation it is extremely likely that\n" +#. "the package is simply not installable and a bug report against\n" +#. "that package should be filed.") << std::endl; +#. } +#. +msgid "The following information may help to resolve the situation:" +msgstr "下列信息可能会对解决问题有所帮助：" + +msgid "Internal Error, AutoRemover broke stuff" +msgstr "内部错误，自动卸载工具坏事了" + +msgid "" +"The following package was automatically installed and is no longer required:" +msgid_plural "" +"The following packages were automatically installed and are no longer " +"required:" +msgstr[0] "下列软件包是自动安装的并且现在不需要了：" + +#, c-format +msgid "%lu package was automatically installed and is no longer required.\n" +msgid_plural "" +"%lu packages were automatically installed and are no longer required.\n" +msgstr[0] "%lu 个自动安装的的软件包现在已不再需要了。\n" + +msgid "Use 'apt-get autoremove' to remove it." +msgid_plural "Use 'apt-get autoremove' to remove them." +msgstr[0] "使用'apt-get autoremove'来卸载它(它们)。" + +msgid "You might want to run 'apt-get -f install' to correct these:" +msgstr "您可能需要运行“apt-get -f install”来纠正下列错误：" + +msgid "" +"Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a " +"solution)." +msgstr "" +"有未能满足的依赖关系。请尝试不指明软件包的名字来运行“apt-get -f install”(也可" +"以指定一个解决办法)。" + +msgid "" +"Some packages could not be installed. This may mean that you have\n" +"requested an impossible situation or if you are using the unstable\n" +"distribution that some required packages have not yet been created\n" +"or been moved out of Incoming." +msgstr "" +"有一些软件包无法被安装。如果您用的是 unstable 发行版，这也许是\n" +"因为系统无法达到您要求的状态造成的。该版本中可能会有一些您需要的软件\n" +"包尚未被创建或是它们已被从新到(Incoming)目录移出。" + +msgid "Broken packages" +msgstr "破损的软件包" + +msgid "The following extra packages will be installed:" +msgstr "将会安装下列额外的软件包：" + +msgid "Suggested packages:" +msgstr "建议安装的软件包：" + +msgid "Recommended packages:" +msgstr "推荐安装的软件包：" + +#, c-format +msgid "Skipping %s, it is already installed and upgrade is not set.\n" +msgstr "忽略了 %s，它已经被安装而且没有指定要升级。\n" + +#, c-format +msgid "Skipping %s, it is not installed and only upgrades are requested.\n" +msgstr "忽略了 %s，它已经被安装而且仅请求了升级。\n" + +#, c-format +msgid "Reinstallation of %s is not possible, it cannot be downloaded.\n" +msgstr "不能重新安装 %s，因为无法下载它。\n" + +#, c-format +msgid "%s is already the newest version.\n" +msgstr "%s 已经是最新的版本。\n" + +#, c-format +msgid "%s set to manually installed.\n" +msgstr "%s 被设置为手动安装。\n" + +#, c-format +msgid "Selected version '%s' (%s) for '%s'\n" +msgstr "为 %3$s 选定了版本 %1$s (%2$s)\n" + +#, c-format +msgid "Selected version '%s' (%s) for '%s' because of '%s'\n" +msgstr "由于 %4$s，为 %3$s 选定了版本 %1$s (%2$s)\n" + +#. TRANSLATORS: Note, this is not an interactive question +#, c-format +msgid "Package '%s' is not installed, so not removed. Did you mean '%s'?\n" +msgstr "软件包 %s 还未安装，因而不会被卸载。您的意思是 ‘%s’ 吗？\n" + +#, c-format +msgid "Package '%s' is not installed, so not removed\n" +msgstr "软件包 %s 还未安装，因而不会被卸载\n" + +msgid "Listing" +msgstr "正在列表" + +#, c-format +msgid "There is %i additional version. Please use the '-a' switch to see it" +msgid_plural "" +"There are %i additional versions. Please use the '-a' switch to see them." +msgstr[0] "还有 %i 个版本。请使用 -a 选项来查看它(他们)。" + +msgid "" +"NOTE: This is only a simulation!\n" +" apt-get needs root privileges for real execution.\n" +" Keep also in mind that locking is deactivated,\n" +" so don't depend on the relevance to the real current situation!" +msgstr "" +"注意：这只是模拟！\n" +" apt-get 需要 root 特权进行实际的执行。\n" +" 同时请记住此时并未锁定，所以请勿完全相信当前的情况！" + +msgid "unknown" +msgstr "未知" + +#, c-format +msgid "[installed,upgradable to: %s]" +msgstr "[已安装，可升级至：%s]" + +msgid "[installed,local]" +msgstr "[已安装，本地]" + +msgid "[installed,auto-removable]" +msgstr "[已安装，可自动卸载]" + +msgid "[installed,automatic]" +msgstr "[已安装，自动]" + +msgid "[installed]" +msgstr "[已安装]" + +#, c-format +msgid "[upgradable from: %s]" +msgstr "[可从该版本升级：%s]" + +msgid "[residual-config]" +msgstr "[配置文件残留]" + +#, c-format +msgid "but %s is installed" +msgstr "但是 %s 已经安装" + +#, c-format +msgid "but %s is to be installed" +msgstr "但是 %s 正要被安装" + +msgid "but it is not installable" +msgstr "但无法安装它" + +msgid "but it is a virtual package" +msgstr "但是它是虚拟软件包" + +msgid "but it is not installed" +msgstr "但是它还没有被安装" + +msgid "but it is not going to be installed" +msgstr "但是它将不会被安装" + +msgid " or" +msgstr " 或" + +msgid "The following packages have unmet dependencies:" +msgstr "下列软件包有未满足的依赖关系：" + +msgid "The following NEW packages will be installed:" +msgstr "下列【新】软件包将被安装：" + +msgid "The following packages will be REMOVED:" +msgstr "下列软件包将被【卸载】：" + +msgid "The following packages have been kept back:" +msgstr "下列软件包的版本将保持不变：" + +msgid "The following packages will be upgraded:" +msgstr "下列软件包将被升级：" + +msgid "The following packages will be DOWNGRADED:" +msgstr "下列软件包将被【降级】：" + +msgid "The following held packages will be changed:" +msgstr "下列被要求保持版本不变的软件包将被改变：" + +#, c-format +msgid "%s (due to %s) " +msgstr "%s (是由于 %s) " + +msgid "" +"WARNING: The following essential packages will be removed.\n" +"This should NOT be done unless you know exactly what you are doing!" +msgstr "" +"【警告】：下列基础软件包将被卸载。\n" +"请勿尝试，除非您确实知道您在做什么！" + +#, c-format +msgid "%lu upgraded, %lu newly installed, " +msgstr "升级了 %lu 个软件包，新安装了 %lu 个软件包，" + +#, c-format +msgid "%lu reinstalled, " +msgstr "重新安装了 %lu 个软件包，" + +#, c-format +msgid "%lu downgraded, " +msgstr "降级了 %lu 个软件包，" + +#, c-format +msgid "%lu to remove and %lu not upgraded.\n" +msgstr "要卸载 %lu 个软件包，有 %lu 个软件包未被升级。\n" + +#, c-format +msgid "%lu not fully installed or removed.\n" +msgstr "有 %lu 个软件包没有被完全安装或卸载。\n" + +#. TRANSLATOR: Yes/No question help-text: defaulting to Y[es] +#. e.g. "Do you want to continue? [Y/n] " +#. The user has to answer with an input matching the +#. YESEXPR/NOEXPR defined in your l10n. +msgid "[Y/n]" +msgstr "[Y/n]" + +#. TRANSLATOR: Yes/No question help-text: defaulting to N[o] +#. e.g. "Should this file be removed? [y/N] " +#. The user has to answer with an input matching the +#. YESEXPR/NOEXPR defined in your l10n. +msgid "[y/N]" +msgstr "[y/N]" + +#. TRANSLATOR: "Yes" answer printed for a yes/no question if --assume-yes is set +msgid "Y" +msgstr "Y" + +#. TRANSLATOR: "No" answer printed for a yes/no question if --assume-no is set +msgid "N" +msgstr "N" + +#, c-format +msgid "Regex compilation error - %s" +msgstr "编译正则表达式时出错 - %s" + +msgid "You must give at least one search pattern" +msgstr "您必须明确地给出至少一个表达式" + +msgid "Full Text Search" +msgstr "全文搜索" + +#, c-format +msgid "Package file %s is out of sync." +msgstr "软件包文件 %s 尚未同步。" + +#, c-format +msgid "There is %i additional record. Please use the '-a' switch to see it" +msgid_plural "" +"There are %i additional records. Please use the '-a' switch to see them." +msgstr[0] "有 %i 条附加记录。请加上 ‘-a’ 参数来查看它们" + +msgid "not a real package (virtual)" +msgstr "不是一个实包(虚包)" + +msgid "No packages found" +msgstr "没有发现匹配的软件包" + +#, c-format +msgid "Failed to parse %s. Edit again? " +msgstr "解析 %s 失败。请重新编辑之后再试。" + +#, c-format +msgid "Your '%s' file changed, please run 'apt-get update'." +msgstr "您的 %s 文件有过改动，请执行 ‘apt-get update’。" + +msgid "The update command takes no arguments" +msgstr " update 命令不需要参数" + +#, c-format +msgid "%i package can be upgraded. Run 'apt list --upgradable' to see it.\n" +msgid_plural "" +"%i packages can be upgraded. Run 'apt list --upgradable' to see them.\n" +msgstr[0] "" +"有 %i 个软件包可以升级。请执行 ‘apt list --upgradable’ 来查看它们。\n" + +msgid "All packages are up to date." +msgstr "所有软件包均为最新。" + +msgid "Calculating upgrade... " +msgstr "正在对升级进行计算... " + +msgid "Done" +msgstr "完成" + #, c-format msgid "Package %s version %s has an unmet dep:\n" msgstr "版本为 %2$s 的软件包 %1$s 有未满足的依赖关系：\n" -#: cmdline/apt-cache.cc:277 msgid "Total package names: " msgstr "软件包名称总数：" -#: cmdline/apt-cache.cc:279 msgid "Total package structures: " msgstr "全部软件包结构：" -#: cmdline/apt-cache.cc:319 msgid " Normal packages: " msgstr " 普通软件包：" -#: cmdline/apt-cache.cc:320 msgid " Pure virtual packages: " msgstr " 完全虚拟软件包：" -#: cmdline/apt-cache.cc:321 msgid " Single virtual packages: " msgstr " 单虚拟软件包：" -#: cmdline/apt-cache.cc:322 msgid " Mixed virtual packages: " msgstr " 混合虚拟软件包：" -#: cmdline/apt-cache.cc:323 msgid " Missing: " msgstr " 缺失：" -#: cmdline/apt-cache.cc:325 msgid "Total distinct versions: " msgstr "按版本共计：" -#: cmdline/apt-cache.cc:327 msgid "Total distinct descriptions: " msgstr "按不同的说明共计：" -#: cmdline/apt-cache.cc:329 msgid "Total dependencies: " msgstr "按依赖关系共计：" -#: cmdline/apt-cache.cc:332 msgid "Total ver/file relations: " msgstr "按版本/文件关系共计：" -#: cmdline/apt-cache.cc:334 msgid "Total Desc/File relations: " msgstr "按说明/文件关系共计：" -#: cmdline/apt-cache.cc:336 msgid "Total Provides mappings: " msgstr "提供映射共计：" -#: cmdline/apt-cache.cc:348 msgid "Total globbed strings: " msgstr "Glob 字串共计：" -#: cmdline/apt-cache.cc:362 msgid "Total dependency version space: " msgstr "依赖关系版本名所占空间共计：" -#: cmdline/apt-cache.cc:367 msgid "Total slack space: " msgstr "Slack 空间共计：" -#: cmdline/apt-cache.cc:375 msgid "Total space accounted for: " msgstr "总占用空间：" -#: cmdline/apt-cache.cc:506 cmdline/apt-cache.cc:1155 -#: apt-private/private-show.cc:58 -#, c-format -msgid "Package file %s is out of sync." -msgstr "软件包文件 %s 尚未同步。" - -#: cmdline/apt-cache.cc:584 cmdline/apt-cache.cc:1442 -#: cmdline/apt-cache.cc:1444 cmdline/apt-cache.cc:1521 cmdline/apt-mark.cc:59 -#: cmdline/apt-mark.cc:106 cmdline/apt-mark.cc:232 -#: apt-private/private-show.cc:171 apt-private/private-show.cc:173 -msgid "No packages found" -msgstr "没有发现匹配的软件包" - -#: cmdline/apt-cache.cc:1254 apt-private/private-search.cc:41 -msgid "You must give at least one search pattern" -msgstr "您必须明确地给出至少一个表达式" - -#: cmdline/apt-cache.cc:1421 msgid "This command is deprecated. Please use 'apt-mark showauto' instead." msgstr "该命令已废弃。请使用‘apt-mark showauto’代替。" -#: cmdline/apt-cache.cc:1516 apt-pkg/cacheset.cc:596 #, c-format msgid "Unable to locate package %s" msgstr "未发现软件包 %s" -#: cmdline/apt-cache.cc:1546 msgid "Package files:" msgstr "软件包文件：" -#: cmdline/apt-cache.cc:1553 cmdline/apt-cache.cc:1644 msgid "Cache is out of sync, can't x-ref a package file" msgstr "缓存尚未同步，无法交差引证(x-ref)一个软件包文件" #. Show any packages have explicit pins -#: cmdline/apt-cache.cc:1567 msgid "Pinned packages:" msgstr "被锁定的软件包：" -#: cmdline/apt-cache.cc:1579 cmdline/apt-cache.cc:1624 msgid "(not found)" msgstr "(没有找到)" -#: cmdline/apt-cache.cc:1587 msgid " Installed: " msgstr " 已安装：" -#: cmdline/apt-cache.cc:1588 msgid " Candidate: " msgstr " 候选软件包：" -#: cmdline/apt-cache.cc:1606 cmdline/apt-cache.cc:1614 msgid "(none)" msgstr "(无)" -#: cmdline/apt-cache.cc:1621 msgid " Package pin: " msgstr " 软件包锁：" #. Show the priority tables -#: cmdline/apt-cache.cc:1630 msgid " Version table:" msgstr " 版本列表：" -#: cmdline/apt-cache.cc:1743 cmdline/apt-cdrom.cc:207 cmdline/apt-config.cc:83 -#: cmdline/apt-get.cc:1591 cmdline/apt-helper.cc:84 cmdline/apt-mark.cc:388 -#: cmdline/apt.cc:42 cmdline/apt-extracttemplates.cc:217 -#: ftparchive/apt-ftparchive.cc:620 cmdline/apt-internal-solver.cc:45 -#: cmdline/apt-sortpkgs.cc:147 #, c-format msgid "%s %s for %s compiled on %s %s\n" msgstr "%s %s，用于 %s 构架，编译于 %s %s\n" -#: cmdline/apt-cache.cc:1750 msgid "" "Usage: apt-cache [options] command\n" " apt-cache [options] showpkg pkg1 [pkg2 ...]\n" @@ -236,20 +663,16 @@ msgstr "" " -o=? 设置任意指定的配置选项，例如 -o dir::cache=/tmp\n" "若要了解更多信息，您还可以查阅 apt-cache(8) 和 apt.conf(5) 参考手册。\n" -#: cmdline/apt-cdrom.cc:76 msgid "Please provide a name for this Disc, such as 'Debian 5.0.3 Disk 1'" msgstr "请给这张盘片起个名字，比如“Debian 5.0.3 Disk 1”" -#: cmdline/apt-cdrom.cc:91 msgid "Please insert a Disc in the drive and press enter" msgstr "请把盘片插入驱动器再按回车键" -#: cmdline/apt-cdrom.cc:139 #, c-format msgid "Failed to mount '%s' to '%s'" msgstr "无法将 %s 挂载到 %s" -#: cmdline/apt-cdrom.cc:178 msgid "" "No CD-ROM could be auto-detected or found using the default mount point.\n" "You may try the --cdrom option to set the CD-ROM mount point.\n" @@ -260,15 +683,12 @@ msgstr "" "您可以尝试用 --cdrom 选项来设置 CD-ROM 的挂载点。\n" "更多关于 CD-ROM 自动检测以及挂载点的信息，请参见‘man apt-cdrom’。" -#: cmdline/apt-cdrom.cc:182 msgid "Repeat this process for the rest of the CDs in your set." msgstr "请对您的盘片套件中的其它盘片重复相同的操作。" -#: cmdline/apt-config.cc:48 msgid "Arguments not in pairs" msgstr "参数没有成对" -#: cmdline/apt-config.cc:89 msgid "" "Usage: apt-config [options] command\n" "\n" @@ -296,71 +716,52 @@ msgstr "" " -c=? 读取指定的配置文件\n" " -o=? 设置任意指定的配置选项，例如：-o dir::cache=/tmp\n" -#: cmdline/apt-get.cc:245 #, c-format msgid "Can not find a package for architecture '%s'" msgstr "找不到‘%s’体系结构下的软件包" -#: cmdline/apt-get.cc:327 #, c-format msgid "Can not find a package '%s' with version '%s'" msgstr "找不到软件包‘%s’的‘%s’版本" -#: cmdline/apt-get.cc:330 #, c-format msgid "Can not find a package '%s' with release '%s'" msgstr "找不到软件包‘%s’的‘%s’发行" -#: cmdline/apt-get.cc:367 #, c-format msgid "Picking '%s' as source package instead of '%s'\n" msgstr "选择 %s 作为源代码包而非 %s\n" -#: cmdline/apt-get.cc:423 #, c-format msgid "Can not find version '%s' of package '%s'" msgstr "找不到 %2$s 软件包的 %1$s 版本" -#: cmdline/apt-get.cc:454 #, c-format msgid "Couldn't find package %s" msgstr "无法找到软件包 %s" -#: cmdline/apt-get.cc:459 cmdline/apt-mark.cc:81 -#: apt-private/private-install.cc:865 -#, c-format -msgid "%s set to manually installed.\n" -msgstr "%s 被设置为手动安装。\n" - -#: cmdline/apt-get.cc:461 cmdline/apt-mark.cc:83 #, c-format msgid "%s set to automatically installed.\n" msgstr "%s 被设置为手动安装。\n" -#: cmdline/apt-get.cc:469 cmdline/apt-mark.cc:127 msgid "" "This command is deprecated. Please use 'apt-mark auto' and 'apt-mark manual' " "instead." msgstr "该命令已废弃。请用‘apt-mark auto’或‘apt-mark manual’替代。" -#: cmdline/apt-get.cc:538 cmdline/apt-get.cc:546 msgid "Internal error, problem resolver broke stuff" msgstr "内部错误，问题解决工具坏事了" -#: cmdline/apt-get.cc:574 cmdline/apt-get.cc:611 msgid "Unable to lock the download directory" msgstr "无法锁定下载目录" -#: cmdline/apt-get.cc:726 msgid "Must specify at least one package to fetch source for" msgstr "要下载源代码，必须指定至少一个对应的软件包" -#: cmdline/apt-get.cc:766 cmdline/apt-get.cc:1071 #, c-format msgid "Unable to find a source package for %s" msgstr "无法找到与 %s 对应的源代码包" -#: cmdline/apt-get.cc:786 #, c-format msgid "" "NOTICE: '%s' packaging is maintained in the '%s' version control system at:\n" @@ -369,7 +770,6 @@ msgstr "" "提示：%s 的打包工作被维护于以下位置的 %s 版本控制系统中：\n" "%s\n" -#: cmdline/apt-get.cc:791 #, c-format msgid "" "Please use:\n" @@ -380,78 +780,55 @@ msgstr "" "bzr branch %s\n" "获得该软件包的最近更新(可能尚未正式发布)。\n" -#: cmdline/apt-get.cc:839 #, c-format msgid "Skipping already downloaded file '%s'\n" msgstr "忽略已下载的文件“%s”\n" -#: cmdline/apt-get.cc:873 cmdline/apt-get.cc:876 -#: apt-private/private-install.cc:187 apt-private/private-install.cc:190 -#, c-format -msgid "Couldn't determine free space in %s" -msgstr "无法获知您在 %s 上的可用空间" - -#: cmdline/apt-get.cc:886 #, c-format msgid "You don't have enough free space in %s" msgstr "您在 %s 上没有足够的可用空间" #. TRANSLATOR: The required space between number and unit is already included #. in the replacement strings, so %sB will be correctly translate in e.g. 1,5 MB -#: cmdline/apt-get.cc:895 #, c-format msgid "Need to get %sB/%sB of source archives.\n" msgstr "需要下载 %sB/%sB 的源代码包。\n" #. TRANSLATOR: The required space between number and unit is already included #. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB -#: cmdline/apt-get.cc:900 #, c-format msgid "Need to get %sB of source archives.\n" msgstr "需要下载 %sB 的源代码包。\n" -#: cmdline/apt-get.cc:906 #, c-format msgid "Fetch source %s\n" msgstr "下载源代码 %s\n" -#: cmdline/apt-get.cc:924 msgid "Failed to fetch some archives." msgstr "有一些包文件无法下载。" -#: cmdline/apt-get.cc:929 apt-private/private-install.cc:314 -msgid "Download complete and in download only mode" -msgstr "下载完毕，目前是“仅下载”模式" - -#: cmdline/apt-get.cc:954 #, c-format msgid "Skipping unpack of already unpacked source in %s\n" msgstr "忽略已经被解包到 %s 目录的源代码包\n" -#: cmdline/apt-get.cc:967 #, c-format msgid "Unpack command '%s' failed.\n" msgstr "运行解包的命令“%s”出错。\n" -#: cmdline/apt-get.cc:968 #, c-format msgid "Check if the 'dpkg-dev' package is installed.\n" msgstr "请检查是否安装了“dpkg-dev”软件包。\n" -#: cmdline/apt-get.cc:996 #, c-format msgid "Build command '%s' failed.\n" msgstr "执行构造软件包命令“%s”失败。\n" -#: cmdline/apt-get.cc:1015 msgid "Child process failed" msgstr "子进程出错" -#: cmdline/apt-get.cc:1034 msgid "Must specify at least one package to check builddeps for" msgstr "要检查生成软件包的构建依赖关系，必须指定至少一个软件包" -#: cmdline/apt-get.cc:1059 #, c-format msgid "" "No architecture information available for %s. See apt.conf(5) APT::" @@ -460,17 +837,14 @@ msgstr "" "找不到关于 %s 的有效体系结构信息。请参见 apt.conf(5) APT::Architectures for " "setup" -#: cmdline/apt-get.cc:1083 cmdline/apt-get.cc:1086 #, c-format msgid "Unable to get build-dependency information for %s" msgstr "无法获得 %s 的构建依赖关系信息" -#: cmdline/apt-get.cc:1106 #, c-format msgid "%s has no build depends.\n" msgstr " %s 没有构建依赖关系信息。\n" -#: cmdline/apt-get.cc:1276 #, c-format msgid "" "%s dependency for %s can't be satisfied because %s is not allowed on '%s' " @@ -478,19 +852,16 @@ msgid "" msgstr "" "由于 %3$s 不被软件包 %4$s 所允许，因此不能满足 %2$s 所要求的 %1$s 依赖关系" -#: cmdline/apt-get.cc:1294 #, c-format msgid "" "%s dependency for %s cannot be satisfied because the package %s cannot be " "found" msgstr "由于无法找到软件包 %3$s ，因此不能满足 %2$s 所要求的 %1$s 依赖关系" -#: cmdline/apt-get.cc:1317 #, c-format msgid "Failed to satisfy %s dependency for %s: Installed package %s is too new" msgstr "无法满足 %2$s 所要求 %1$s 依赖关系：已安装的软件包 %3$s 太新" -#: cmdline/apt-get.cc:1356 #, c-format msgid "" "%s dependency for %s cannot be satisfied because candidate version of " @@ -498,37 +869,30 @@ msgid "" msgstr "" "软件包 %3$s 的候选版本不能满足版本要求，因此 %2$s 软件包的 %1$s 依赖无法满足" -#: cmdline/apt-get.cc:1362 #, c-format msgid "" "%s dependency for %s cannot be satisfied because package %s has no candidate " "version" msgstr "软件包 %3$s 没有可用的候选版本，因此 %2$s 的 %1$s 依赖无法满足" -#: cmdline/apt-get.cc:1385 #, c-format msgid "Failed to satisfy %s dependency for %s: %s" msgstr "无法满足 %2$s 所要求 %1$s 依赖关系：%3$s" -#: cmdline/apt-get.cc:1400 #, c-format msgid "Build-dependencies for %s could not be satisfied." msgstr "不能满足软件包 %s 所要求的构建依赖关系。" -#: cmdline/apt-get.cc:1405 msgid "Failed to process build dependencies" msgstr "无法处理构建依赖关系" -#: cmdline/apt-get.cc:1498 cmdline/apt-get.cc:1510 #, c-format msgid "Changelog for %s (%s)" msgstr "%s (%s) 的 Changelog" -#: cmdline/apt-get.cc:1596 msgid "Supported modules:" msgstr "支持的模块：" -#: cmdline/apt-get.cc:1637 msgid "" "Usage: apt-get [options] command\n" " apt-get [options] install|remove pkg1 [pkg2 ...]\n" @@ -615,19 +979,15 @@ msgstr "" "以获取更多信息和选项。\n" " 本 APT 具有超级牛力。\n" -#: cmdline/apt-helper.cc:36 msgid "Need one URL as argument" msgstr "需要一个 URL 作为参数" -#: cmdline/apt-helper.cc:49 msgid "Must specify at least one pair url/filename" msgstr "必须指定至少一对URL或者文件名" -#: cmdline/apt-helper.cc:73 cmdline/apt-helper.cc:77 msgid "Download Failed" msgstr "下载失败" -#: cmdline/apt-helper.cc:91 msgid "" "Usage: apt-helper [options] command\n" " apt-helper [options] download-file uri target-path\n" @@ -651,53 +1011,41 @@ msgstr "" "\n" " This APT helper has Super Meep Powers.\n" -#: cmdline/apt-mark.cc:68 #, c-format msgid "%s can not be marked as it is not installed.\n" msgstr "%s 还没有安装，因此无法标记。\n" -#: cmdline/apt-mark.cc:74 #, c-format msgid "%s was already set to manually installed.\n" msgstr "%s 已经被设置为手动安装。\n" -#: cmdline/apt-mark.cc:76 #, c-format msgid "%s was already set to automatically installed.\n" msgstr "%s 已经被设置为自动安装。\n" -#: cmdline/apt-mark.cc:241 #, c-format msgid "%s was already set on hold.\n" msgstr "%s 已经设置为保留。\n" -#: cmdline/apt-mark.cc:243 #, c-format msgid "%s was already not hold.\n" msgstr "%s 已经设置为不保留。\n" -#: cmdline/apt-mark.cc:258 cmdline/apt-mark.cc:339 -#: apt-pkg/contrib/fileutl.cc:812 apt-pkg/contrib/gpgv.cc:219 -#: apt-pkg/deb/dpkgpm.cc:1317 #, c-format msgid "Waited for %s but it wasn't there" msgstr "等待子进程 %s 的退出，但是它并不存在" -#: cmdline/apt-mark.cc:273 cmdline/apt-mark.cc:322 #, c-format msgid "%s set on hold.\n" msgstr "%s 设置为保留。\n" -#: cmdline/apt-mark.cc:275 cmdline/apt-mark.cc:327 #, c-format msgid "Canceled hold on %s.\n" msgstr "取消保留 %s 的设置。\n" -#: cmdline/apt-mark.cc:345 msgid "Executing dpkg failed. Are you root?" msgstr "执行 dpkg 失败。您是 root 吗？" -#: cmdline/apt-mark.cc:392 msgid "" "Usage: apt-mark [options] {auto|manual} pkg1 [pkg2 ...]\n" "\n" @@ -747,7 +1095,6 @@ msgstr "" " -o=? 任意设置一个配置项，比如 -o dir::cache=/tmp\n" "更多细节请参见 the apt-mark(8) 和 apt.conf(5) 的 man 手册。" -#: cmdline/apt.cc:47 msgid "" "Usage: apt [options] command\n" "\n" @@ -786,12 +1133,10 @@ msgstr "" "\n" " edit-sources - 编辑软件源信息文件\n" -#: methods/cdrom.cc:203 #, c-format msgid "Unable to read the cdrom database %s" msgstr "无法读取盘片数据库 %s" -#: methods/cdrom.cc:212 msgid "" "Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update " "cannot be used to add new CD-ROMs" @@ -799,1537 +1144,826 @@ msgstr "" "请使用 apt-cdrom，通过它就可以让 APT 能识别该盘片。apt-get upgdate 不能被用来" "加入新的盘片。" -#: methods/cdrom.cc:222 msgid "Wrong CD-ROM" msgstr "错误的 CD-ROM" -#: methods/cdrom.cc:249 #, c-format msgid "Unable to unmount the CD-ROM in %s, it may still be in use." msgstr "无法卸载现在挂载于 %s 的 CD-ROM，它可能正在使用中。" -#: methods/cdrom.cc:254 msgid "Disk not found." msgstr "找不到盘片。" -#: methods/cdrom.cc:262 methods/file.cc:83 methods/rsh.cc:281 msgid "File not found" msgstr "无法找到该文件" -#: methods/copy.cc:61 methods/gzip.cc:117 methods/rred.cc:598 -#: methods/rred.cc:608 +#, c-format +msgid "Connecting to %s (%s)" +msgstr "正在连接 %s (%s)" + +#, c-format +msgid "[IP: %s %s]" +msgstr "[IP: %s %s]" + +#, c-format +msgid "Could not create a socket for %s (f=%u t=%u p=%u)" +msgstr "无法为 %s 创建套接字(f=%u t=%u p=%u)" + +#, c-format +msgid "Cannot initiate the connection to %s:%s (%s)." +msgstr "无法发起与 %s:%s (%s) 的连接" + +#, c-format +msgid "Could not connect to %s:%s (%s), connection timed out" +msgstr "无法连接上 %s:%s (%s)，连接超时" + +msgid "Failed" +msgstr "失败" + +#, c-format +msgid "Could not connect to %s:%s (%s)." +msgstr "无法连接上 %s:%s (%s)。" + +#. We say this mainly because the pause here is for the +#. ssh connection that is still going +#, c-format +msgid "Connecting to %s" +msgstr "正在连接 %s" + +#, c-format +msgid "Could not resolve '%s'" +msgstr "无法解析域名“%s”" + +#, c-format +msgid "Temporary failure resolving '%s'" +msgstr "暂时不能解析域名“%s”" + +#, c-format +msgid "System error resolving '%s:%s'" +msgstr "解析“%s:%s”时出现系统故障" + +#, c-format +msgid "Something wicked happened resolving '%s:%s' (%i - %s)" +msgstr "解析“%s:%s”时，出现了某些故障(%i - %s)" + +#, c-format +msgid "Unable to connect to %s:%s:" +msgstr "不能连接到 %s：%s：" + msgid "Failed to stat" msgstr "无法读取状态" -#: methods/copy.cc:105 methods/gzip.cc:124 methods/rred.cc:605 msgid "Failed to set modification time" msgstr "无法设置文件的修改日期" -#: methods/file.cc:48 msgid "Invalid URI, local URIS must not start with //" msgstr "无效的 URI，本地的 URI 不能以 // 开头" #. Login must be before getpeername otherwise dante won't work. -#: methods/ftp.cc:177 msgid "Logging in" msgstr "正在登录" -#: methods/ftp.cc:183 msgid "Unable to determine the peer name" msgstr "无法获知对方主机名" -#: methods/ftp.cc:188 msgid "Unable to determine the local name" msgstr "无法获知本地主机名" -#: methods/ftp.cc:219 methods/ftp.cc:247 #, c-format msgid "The server refused the connection and said: %s" msgstr "服务器拒绝了我们的连接，响应信息为：%s" -#: methods/ftp.cc:225 #, c-format msgid "USER failed, server said: %s" msgstr "USER 指令出错，服务器响应信息为：%s" -#: methods/ftp.cc:232 #, c-format msgid "PASS failed, server said: %s" msgstr "PASS 指令出错，服务器响应信息为：%s" -#: methods/ftp.cc:252 msgid "" "A proxy server was specified but no login script, Acquire::ftp::ProxyLogin " "is empty." msgstr "" "您指定了代理服务器，但是没有登陆脚本，Acquire::ftp::ProxyLogin 设置为空。" -#: methods/ftp.cc:280 #, c-format msgid "Login script command '%s' failed, server said: %s" msgstr "登录脚本命令“%s”出错，服务器响应信息为：%s" -#: methods/ftp.cc:306 #, c-format msgid "TYPE failed, server said: %s" msgstr "TYPE 指令出错，服务器响应信息为：%s" -#: methods/ftp.cc:344 methods/ftp.cc:456 methods/rsh.cc:195 methods/rsh.cc:243 msgid "Connection timeout" msgstr "连接超时" -#: methods/ftp.cc:350 msgid "Server closed the connection" msgstr "服务器关闭了连接" -#: methods/ftp.cc:353 methods/rsh.cc:202 apt-pkg/contrib/fileutl.cc:1476 -#: apt-pkg/contrib/fileutl.cc:1485 apt-pkg/contrib/fileutl.cc:1490 -#: apt-pkg/contrib/fileutl.cc:1492 msgid "Read error" msgstr "读错误" -#: methods/ftp.cc:360 methods/rsh.cc:209 msgid "A response overflowed the buffer." msgstr "回应超出了缓存区大小。" -#: methods/ftp.cc:377 methods/ftp.cc:389 msgid "Protocol corruption" msgstr "协议有误" -#: methods/ftp.cc:462 methods/rsh.cc:249 apt-pkg/contrib/fileutl.cc:872 -#: apt-pkg/contrib/fileutl.cc:1598 apt-pkg/contrib/fileutl.cc:1607 -#: apt-pkg/contrib/fileutl.cc:1612 apt-pkg/contrib/fileutl.cc:1614 -#: apt-pkg/contrib/fileutl.cc:1639 msgid "Write error" msgstr "写出错" -#: methods/ftp.cc:701 methods/ftp.cc:707 methods/ftp.cc:742 msgid "Could not create a socket" msgstr "无法创建套接字" -#: methods/ftp.cc:712 msgid "Could not connect data socket, connection timed out" msgstr "无法连接上数据套接字，连接超时" -#: methods/ftp.cc:716 methods/connect.cc:116 -msgid "Failed" -msgstr "失败" - -#: methods/ftp.cc:718 msgid "Could not connect passive socket." msgstr "无法连接被动模式的套接字。" -#: methods/ftp.cc:735 msgid "getaddrinfo was unable to get a listening socket" msgstr "getaddrinfo 无法得到监听套接字" -#: methods/ftp.cc:749 msgid "Could not bind a socket" msgstr "无法绑定套接字" -#: methods/ftp.cc:753 msgid "Could not listen on the socket" msgstr "无法在套接字上监听" -#: methods/ftp.cc:760 msgid "Could not determine the socket's name" msgstr "无法确定套接字的名字" -#: methods/ftp.cc:792 msgid "Unable to send PORT command" msgstr "无法发出 PORT 指令" -#: methods/ftp.cc:802 #, c-format msgid "Unknown address family %u (AF_*)" msgstr "无法识别的地址族 %u (AF_*)" -#: methods/ftp.cc:811 #, c-format msgid "EPRT failed, server said: %s" msgstr "EPRT 指令出错，服务器响应信息为：%s" -#: methods/ftp.cc:831 msgid "Data socket connect timed out" msgstr "数据套接字连接超时" -#: methods/ftp.cc:838 msgid "Unable to accept connection" msgstr "无法接受连接" -#: methods/ftp.cc:877 methods/server.cc:357 methods/rsh.cc:319 msgid "Problem hashing file" msgstr "把文件加入哈希表时出错" -#: methods/ftp.cc:890 #, c-format msgid "Unable to fetch file, server said '%s'" msgstr "无法获取文件，服务器响应信息为“%s”" -#: methods/ftp.cc:905 methods/rsh.cc:338 msgid "Data socket timed out" msgstr "数据套接字超时" -#: methods/ftp.cc:935 #, c-format msgid "Data transfer failed, server said '%s'" msgstr "数据传送出错，服务器响应信息为“%s”" #. Get the files information -#: methods/ftp.cc:1014 msgid "Query" msgstr "查询" -#: methods/ftp.cc:1128 msgid "Unable to invoke " msgstr "无法调用 " -#: methods/connect.cc:76 -#, c-format -msgid "Connecting to %s (%s)" -msgstr "正在连接 %s (%s)" - -#: methods/connect.cc:87 -#, c-format -msgid "[IP: %s %s]" -msgstr "[IP: %s %s]" - -#: methods/connect.cc:94 -#, c-format -msgid "Could not create a socket for %s (f=%u t=%u p=%u)" -msgstr "无法为 %s 创建套接字(f=%u t=%u p=%u)" - -#: methods/connect.cc:100 -#, c-format -msgid "Cannot initiate the connection to %s:%s (%s)." -msgstr "无法发起与 %s:%s (%s) 的连接" - -#: methods/connect.cc:108 -#, c-format -msgid "Could not connect to %s:%s (%s), connection timed out" -msgstr "无法连接上 %s:%s (%s)，连接超时" - -#: methods/connect.cc:126 -#, c-format -msgid "Could not connect to %s:%s (%s)." -msgstr "无法连接上 %s:%s (%s)。" - -#. We say this mainly because the pause here is for the -#. ssh connection that is still going -#: methods/connect.cc:154 methods/rsh.cc:442 -#, c-format -msgid "Connecting to %s" -msgstr "正在连接 %s" - -#: methods/connect.cc:180 methods/connect.cc:199 -#, c-format -msgid "Could not resolve '%s'" -msgstr "无法解析域名“%s”" - -#: methods/connect.cc:205 -#, c-format -msgid "Temporary failure resolving '%s'" -msgstr "暂时不能解析域名“%s”" - -#: methods/connect.cc:209 -#, c-format -msgid "System error resolving '%s:%s'" -msgstr "解析“%s:%s”时出现系统故障" - -#: methods/connect.cc:211 -#, c-format -msgid "Something wicked happened resolving '%s:%s' (%i - %s)" -msgstr "解析“%s:%s”时，出现了某些故障(%i - %s)" - -#: methods/connect.cc:258 -#, c-format -msgid "Unable to connect to %s:%s:" -msgstr "不能连接到 %s：%s：" - -#: methods/gpgv.cc:168 msgid "" "Internal error: Good signature, but could not determine key fingerprint?!" msgstr "内部错误：签名正确无误，但是无法确认密钥指纹？！" -#: methods/gpgv.cc:172 msgid "At least one invalid signature was encountered." msgstr "至少发现一个无效的签名。" -#: methods/gpgv.cc:174 msgid "Could not execute 'gpgv' to verify signature (is gpgv installed?)" msgstr "无法运行 gpgv 以验证签名(您安装了 gpgv 吗？)" #. TRANSLATORS: %s is a single techy word like 'NODATA' -#: methods/gpgv.cc:180 #, c-format msgid "" "Clearsigned file isn't valid, got '%s' (does the network require " "authentication?)" msgstr "明文签署文件不可用，结果为‘%s’（您的网络需要认证吗？）" -#: methods/gpgv.cc:184 msgid "Unknown error executing gpgv" msgstr "运行 gpgv 时发生未知错误" -#: methods/gpgv.cc:217 methods/gpgv.cc:224 msgid "The following signatures were invalid:\n" msgstr "下列签名无效：\n" -#: methods/gpgv.cc:231 msgid "" "The following signatures couldn't be verified because the public key is not " "available:\n" msgstr "由于没有公钥，无法验证下列签名：\n" -#: methods/gzip.cc:69 msgid "Empty files can't be valid archives" msgstr "空文件不能当作有效归档" -#: methods/http.cc:513 msgid "Error writing to the file" msgstr "写入文件出错" -#: methods/http.cc:527 msgid "Error reading from server. Remote end closed connection" msgstr "从服务器读取数据时出错，对方关闭了连接" -#: methods/http.cc:529 msgid "Error reading from server" msgstr "从服务器读取数据出错" -#: methods/http.cc:565 msgid "Error writing to file" msgstr "写入文件出错" -#: methods/http.cc:625 msgid "Select failed" msgstr "select 调用出错" -#: methods/http.cc:630 msgid "Connection timed out" msgstr "连接超时" -#: methods/http.cc:653 msgid "Error writing to output file" msgstr "写输出文件时出错" -#: methods/server.cc:52 +#. Only warn if there are no sources.list.d. +#. Only warn if there is no sources.list file. +#, c-format +msgid "Unable to read %s" +msgstr "无法读取 %s" + +#, c-format +msgid "Unable to change to %s" +msgstr "无法切换工作目录到 %s" + +#. FIXME: fallback to a default mirror here instead +#. and provide a config option to define that default +#, c-format +msgid "No mirror file '%s' found " +msgstr "没有找到镜像文件 %s" + +#. FIXME: fallback to a default mirror here instead +#. and provide a config option to define that default +#, c-format +msgid "Can not read mirror file '%s'" +msgstr "无法读取镜像文件 %s" + +#, c-format +msgid "No entry found in mirror file '%s'" +msgstr "在镜像文件 %s 中未找到所需条目" + +#, c-format +msgid "[Mirror: %s]" +msgstr "[镜像：%s]" + +msgid "Failed to create IPC pipe to subprocess" +msgstr "无法为子进程创建 IPC 管道" + +msgid "Connection closed prematurely" +msgstr "连接被永久关闭" + msgid "Waiting for headers" msgstr "正在等待报头" -#: methods/server.cc:111 msgid "Bad header line" msgstr "错误的报头行" -#: methods/server.cc:136 methods/server.cc:143 msgid "The HTTP server sent an invalid reply header" msgstr "该 HTTP 服务器发送了一个无效的应答报头" -#: methods/server.cc:173 msgid "The HTTP server sent an invalid Content-Length header" msgstr "该 HTTP 服务器发送了一个无效的 Content-Length 报头" -#: methods/server.cc:193 msgid "The HTTP server sent an invalid Content-Range header" msgstr "该 HTTP 服务器发送了一个无效的 Content-Range 报头" -#: methods/server.cc:195 msgid "This HTTP server has broken range support" msgstr "该 HTTP 服务器的 range 支持不正常" -#: methods/server.cc:219 msgid "Unknown date format" msgstr "无法识别的日期格式" -#: methods/server.cc:494 msgid "Bad header data" msgstr "错误的报头数据" -#: methods/server.cc:511 methods/server.cc:567 msgid "Connection failed" msgstr "连接失败" -#: methods/server.cc:659 msgid "Internal error" msgstr "内部错误" -#: apt-private/private-list.cc:129 -msgid "Listing" -msgstr "正在列表" - -#: apt-private/private-list.cc:159 -#, c-format -msgid "There is %i additional version. Please use the '-a' switch to see it" -msgid_plural "" -"There are %i additional versions. Please use the '-a' switch to see them." -msgstr[0] "还有 %i 个版本。请使用 -a 选项来查看它(他们)。" - -#: apt-private/private-cachefile.cc:93 -msgid "Correcting dependencies..." -msgstr "正在更正依赖关系..." - -#: apt-private/private-cachefile.cc:96 -msgid " failed." -msgstr " 失败。" - -#: apt-private/private-cachefile.cc:99 -msgid "Unable to correct dependencies" -msgstr "无法更正依赖关系" - -#: apt-private/private-cachefile.cc:102 -msgid "Unable to minimize the upgrade set" -msgstr "无法最小化要升级的软件包集合" - -#: apt-private/private-cachefile.cc:104 -msgid " Done" -msgstr " 完成" - -#: apt-private/private-cachefile.cc:108 -msgid "You might want to run 'apt-get -f install' to correct these." -msgstr "您也许需要运行“apt-get -f install”来修正上面的错误。" - -#: apt-private/private-cachefile.cc:111 -msgid "Unmet dependencies. Try using -f." -msgstr "不能满足依赖关系。不妨试一下 -f 选项。" - -#: apt-private/private-output.cc:103 apt-private/private-show.cc:84 -#: apt-private/private-show.cc:89 -msgid "unknown" -msgstr "未知" - -#: apt-private/private-output.cc:265 -#, c-format -msgid "[installed,upgradable to: %s]" -msgstr "[已安装，可升级至：%s]" - -#: apt-private/private-output.cc:268 -msgid "[installed,local]" -msgstr "[已安装，本地]" - -#: apt-private/private-output.cc:270 -msgid "[installed,auto-removable]" -msgstr "[已安装，可自动卸载]" - -#: apt-private/private-output.cc:272 -msgid "[installed,automatic]" -msgstr "[已安装，自动]" - -#: apt-private/private-output.cc:274 -msgid "[installed]" -msgstr "[已安装]" - -#: apt-private/private-output.cc:277 -#, c-format -msgid "[upgradable from: %s]" -msgstr "[可从该版本升级：%s]" - -#: apt-private/private-output.cc:281 -msgid "[residual-config]" -msgstr "[配置文件残留]" - -#: apt-private/private-output.cc:455 -#, c-format -msgid "but %s is installed" -msgstr "但是 %s 已经安装" - -#: apt-private/private-output.cc:457 -#, c-format -msgid "but %s is to be installed" -msgstr "但是 %s 正要被安装" - -#: apt-private/private-output.cc:464 -msgid "but it is not installable" -msgstr "但无法安装它" - -#: apt-private/private-output.cc:466 -msgid "but it is a virtual package" -msgstr "但是它是虚拟软件包" - -#: apt-private/private-output.cc:469 -msgid "but it is not installed" -msgstr "但是它还没有被安装" - -#: apt-private/private-output.cc:469 -msgid "but it is not going to be installed" -msgstr "但是它将不会被安装" - -#: apt-private/private-output.cc:474 -msgid " or" -msgstr " 或" - -#: apt-private/private-output.cc:488 apt-private/private-output.cc:500 -msgid "The following packages have unmet dependencies:" -msgstr "下列软件包有未满足的依赖关系：" - -#: apt-private/private-output.cc:523 -msgid "The following NEW packages will be installed:" -msgstr "下列【新】软件包将被安装：" - -#: apt-private/private-output.cc:549 -msgid "The following packages will be REMOVED:" -msgstr "下列软件包将被【卸载】：" +#: dselect/install:33 +msgid "Bad default setting!" +msgstr "错误的默认设置！" -#: apt-private/private-output.cc:571 -msgid "The following packages have been kept back:" -msgstr "下列软件包的版本将保持不变：" +#: dselect/install:52 dselect/install:84 dselect/install:88 dselect/install:95 +#: dselect/install:106 dselect/update:45 +msgid "Press enter to continue." +msgstr "按回车键继续。" -#: apt-private/private-output.cc:592 -msgid "The following packages will be upgraded:" -msgstr "下列软件包将被升级：" +#: dselect/install:92 +msgid "Do you want to erase any previously downloaded .deb files?" +msgstr "您想要删除之前下载的所有 .deb 文件吗？" -#: apt-private/private-output.cc:613 -msgid "The following packages will be DOWNGRADED:" -msgstr "下列软件包将被【降级】：" +#: dselect/install:102 +msgid "Some errors occurred while unpacking. Packages that were installed" +msgstr "在解包时发生了一些错误。已经安装的软件包" -#: apt-private/private-output.cc:633 -msgid "The following held packages will be changed:" -msgstr "下列被要求保持版本不变的软件包将被改变：" +#: dselect/install:103 +msgid "will be configured. This may result in duplicate errors" +msgstr "将被配置。这个操作可能会导致出现重复的错误" -#: apt-private/private-output.cc:688 -#, c-format -msgid "%s (due to %s) " -msgstr "%s (是由于 %s) " +#: dselect/install:104 +msgid "or errors caused by missing dependencies. This is OK, only the errors" +msgstr "或一些由于依赖关系不能满足所产生的错误。这个问题不大，只有" -#: apt-private/private-output.cc:696 +#: dselect/install:105 msgid "" -"WARNING: The following essential packages will be removed.\n" -"This should NOT be done unless you know exactly what you are doing!" -msgstr "" -"【警告】：下列基础软件包将被卸载。\n" -"请勿尝试，除非您确实知道您在做什么！" - -#: apt-private/private-output.cc:727 -#, c-format -msgid "%lu upgraded, %lu newly installed, " -msgstr "升级了 %lu 个软件包，新安装了 %lu 个软件包，" - -#: apt-private/private-output.cc:731 -#, c-format -msgid "%lu reinstalled, " -msgstr "重新安装了 %lu 个软件包，" - -#: apt-private/private-output.cc:733 -#, c-format -msgid "%lu downgraded, " -msgstr "降级了 %lu 个软件包，" - -#: apt-private/private-output.cc:735 -#, c-format -msgid "%lu to remove and %lu not upgraded.\n" -msgstr "要卸载 %lu 个软件包，有 %lu 个软件包未被升级。\n" - -#: apt-private/private-output.cc:739 -#, c-format -msgid "%lu not fully installed or removed.\n" -msgstr "有 %lu 个软件包没有被完全安装或卸载。\n" - -#. TRANSLATOR: Yes/No question help-text: defaulting to Y[es] -#. e.g. "Do you want to continue? [Y/n] " -#. The user has to answer with an input matching the -#. YESEXPR/NOEXPR defined in your l10n. -#: apt-private/private-output.cc:761 -msgid "[Y/n]" -msgstr "[Y/n]" - -#. TRANSLATOR: Yes/No question help-text: defaulting to N[o] -#. e.g. "Should this file be removed? [y/N] " -#. The user has to answer with an input matching the -#. YESEXPR/NOEXPR defined in your l10n. -#: apt-private/private-output.cc:767 -msgid "[y/N]" -msgstr "[y/N]" - -#. TRANSLATOR: "Yes" answer printed for a yes/no question if --assume-yes is set -#: apt-private/private-output.cc:778 -msgid "Y" -msgstr "Y" - -#. TRANSLATOR: "No" answer printed for a yes/no question if --assume-no is set -#: apt-private/private-output.cc:784 -msgid "N" -msgstr "N" - -#: apt-private/private-output.cc:806 apt-pkg/cachefilter.cc:35 -#, c-format -msgid "Regex compilation error - %s" -msgstr "编译正则表达式时出错 - %s" - -#: apt-private/private-update.cc:31 -msgid "The update command takes no arguments" -msgstr " update 命令不需要参数" - -#: apt-private/private-update.cc:97 -#, c-format -msgid "%i package can be upgraded. Run 'apt list --upgradable' to see it.\n" -msgid_plural "" -"%i packages can be upgraded. Run 'apt list --upgradable' to see them.\n" -msgstr[0] "" -"有 %i 个软件包可以升级。请执行 ‘apt list --upgradable’ 来查看它们。\n" - -#: apt-private/private-update.cc:101 -msgid "All packages are up to date." -msgstr "所有软件包均为最新。" - -#: apt-private/private-cacheset.cc:37 apt-private/private-search.cc:65 -msgid "Sorting" -msgstr "正在排序" - -#: apt-private/private-show.cc:156 -#, c-format -msgid "There is %i additional record. Please use the '-a' switch to see it" -msgid_plural "" -"There are %i additional records. Please use the '-a' switch to see them." -msgstr[0] "有 %i 条附加记录。请加上 ‘-a’ 参数来查看它们" +"above this message are important. Please fix them and run [I]nstall again" +msgstr "这个提示之前的错误消息才值得您注意。请更正它们，然后再次执行 [I]nstall" -#: apt-private/private-show.cc:163 -msgid "not a real package (virtual)" -msgstr "不是一个实包(虚包)" +#: dselect/update:30 +msgid "Merging available information" +msgstr "正在合并可用信息" -#: apt-private/private-main.cc:32 msgid "" -"NOTE: This is only a simulation!\n" -" apt-get needs root privileges for real execution.\n" -" Keep also in mind that locking is deactivated,\n" -" so don't depend on the relevance to the real current situation!" +"Usage: apt-extracttemplates file1 [file2 ...]\n" +"\n" +"apt-extracttemplates is a tool to extract config and template info\n" +"from debian packages\n" +"\n" +"Options:\n" +" -h This help text\n" +" -t Set the temp dir\n" +" -c=? Read this configuration file\n" +" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n" msgstr "" -"注意：这只是模拟！\n" -" apt-get 需要 root 特权进行实际的执行。\n" -" 同时请记住此时并未锁定，所以请勿完全相信当前的情况！" - -#: apt-private/private-install.cc:82 -msgid "Internal error, InstallPackages was called with broken packages!" -msgstr "内部错误，InstallPackages 被用在了无法安装的软件包上！" - -#: apt-private/private-install.cc:91 -msgid "Packages need to be removed but remove is disabled." -msgstr "有软件包需要被卸载，但是卸载动作被程序设置所禁止。" - -#: apt-private/private-install.cc:110 -msgid "Internal error, Ordering didn't finish" -msgstr "内部错误，Ordering 未能完成" - -#: apt-private/private-install.cc:148 -msgid "How odd... The sizes didn't match, email apt@packages.debian.org" -msgstr "怪了……文件大小不符，请发信给 apt@packages.debian.org 吧" - -#. TRANSLATOR: The required space between number and unit is already included -#. in the replacement strings, so %sB will be correctly translate in e.g. 1,5 MB -#: apt-private/private-install.cc:155 -#, c-format -msgid "Need to get %sB/%sB of archives.\n" -msgstr "需要下载 %sB/%sB 的软件包。\n" - -#. TRANSLATOR: The required space between number and unit is already included -#. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB -#: apt-private/private-install.cc:160 -#, c-format -msgid "Need to get %sB of archives.\n" -msgstr "需要下载 %sB 的软件包。\n" - -#. TRANSLATOR: The required space between number and unit is already included -#. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB -#: apt-private/private-install.cc:167 -#, c-format -msgid "After this operation, %sB of additional disk space will be used.\n" -msgstr "解压缩后会消耗掉 %sB 的额外空间。\n" +"用法： apt-extracttemplates 文件甲 [文件乙 ...]\n" +"\n" +"apt-extracttemplates 是用来从 debian 软件包中解压出配置文件和模板\n" +"信息的工具\n" +"\n" +"选项：\n" +" -h 本帮助文本\n" +" -t 设置 temp 目录\n" +" -c=? 读指定的配置文件\n" +" -o=? 设置任意指定的配置选项，例如 -o dir::cache=/tmp\n" -#. TRANSLATOR: The required space between number and unit is already included -#. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB -#: apt-private/private-install.cc:172 #, c-format -msgid "After this operation, %sB disk space will be freed.\n" -msgstr "解压缩后将会空出 %sB 的空间。\n" +msgid "Unable to mkstemp %s" +msgstr "无法建立临时文件(mkstemp) %s " -#: apt-private/private-install.cc:200 #, c-format -msgid "You don't have enough free space in %s." -msgstr "您在 %s 上没有足够的可用空间。" - -#: apt-private/private-install.cc:210 apt-private/private-download.cc:59 -msgid "There are problems and -y was used without --force-yes" -msgstr "碰到了一些问题，您使用了 -y 选项，但是没有用 --force-yes" - -#: apt-private/private-install.cc:216 apt-private/private-install.cc:238 -msgid "Trivial Only specified but this is not a trivial operation." -msgstr "虽然您指定了仅执行常规操作，但这不是个常规操作。" +msgid "Unable to write to %s" +msgstr "无法写入 %s" -#. TRANSLATOR: This string needs to be typed by the user as a confirmation, so be -#. careful with hard to type or special characters (like non-breaking spaces) -#: apt-private/private-install.cc:220 -msgid "Yes, do as I say!" -msgstr "是，按我说的做！" +msgid "Cannot get debconf version. Is debconf installed?" +msgstr "无法获得 debconf 的版本。您安装了 debconf 吗？" -#: apt-private/private-install.cc:222 -#, c-format msgid "" -"You are about to do something potentially harmful.\n" -"To continue type in the phrase '%s'\n" -" ?] " +"Usage: apt-internal-solver\n" +"\n" +"apt-internal-solver is an interface to use the current internal\n" +"like an external resolver for the APT family for debugging or alike\n" +"\n" +"Options:\n" +" -h This help text.\n" +" -q Loggable output - no progress indicator\n" +" -c=? Read this configuration file\n" +" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n" msgstr "" -"您的操作会导致潜在的危害。\n" -"若还想继续的话，就输入下面的短句“%s”\n" -" ?] " - -#: apt-private/private-install.cc:228 apt-private/private-install.cc:246 -msgid "Abort." -msgstr "中止执行。" - -#: apt-private/private-install.cc:243 -msgid "Do you want to continue?" -msgstr "您希望继续执行吗？" +"用法： apt-internal-solver\n" +"\n" +"apt-internal-solver 是个用于调试及类似用途的接口，它可以\n" +"像 APT 家族外部解决器(resolver)那样使用当前的内部解决器。\n" +"\n" +"选项：\n" +" -h 显示本帮助。\n" +" -q 日志型输出 - 无进度指示\n" +" -c=? 读取指定配置文件\n" +" -o=? 设置任意配置项，比如 -o dir::cache=/tmp\n" -#: apt-private/private-install.cc:313 -msgid "Some files failed to download" -msgstr "有一些文件无法下载" +msgid "Unknown package record!" +msgstr "未知的软件包记录！" -#: apt-private/private-install.cc:320 msgid "" -"Unable to fetch some archives, maybe run apt-get update or try with --fix-" -"missing?" +"Usage: apt-sortpkgs [options] file1 [file2 ...]\n" +"\n" +"apt-sortpkgs is a simple tool to sort package files. The -s option is used\n" +"to indicate what kind of file it is.\n" +"\n" +"Options:\n" +" -h This help text\n" +" -s Use source file sorting\n" +" -c=? Read this configuration file\n" +" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n" msgstr "" -"有几个软件包无法下载，您可以运行 apt-get update 或者加上 --fix-missing 的选项" -"再试试？" - -#: apt-private/private-install.cc:324 -msgid "--fix-missing and media swapping is not currently supported" -msgstr "目前还不支持 --fix-missing 和介质交换" - -#: apt-private/private-install.cc:329 -msgid "Unable to correct missing packages." -msgstr "无法更正缺少的软件包。" - -#: apt-private/private-install.cc:330 -msgid "Aborting install." -msgstr "中止安装。" - -#: apt-private/private-install.cc:366 -msgid "" -"The following package disappeared from your system as\n" -"all files have been overwritten by other packages:" -msgid_plural "" -"The following packages disappeared from your system as\n" -"all files have been overwritten by other packages:" -msgstr[0] "以下软件包因为文件已被其他软件包覆盖而消失：" - -#: apt-private/private-install.cc:370 -msgid "Note: This is done automatically and on purpose by dpkg." -msgstr "注意：这是自动被 dpkg 有意完成的。" - -#: apt-private/private-install.cc:391 -msgid "We are not supposed to delete stuff, can't start AutoRemover" -msgstr "我们不应该进行删除，无法启动自动删除器" - -#: apt-private/private-install.cc:499 -msgid "" -"Hmm, seems like the AutoRemover destroyed something which really\n" -"shouldn't happen. Please file a bug report against apt." -msgstr "似乎自动卸载工具损坏了一些软件，这不应该发生。请向 apt 提交错误报告。" - -#. -#. if (Packages == 1) -#. { -#. c1out << std::endl; -#. c1out << -#. _("Since you only requested a single operation it is extremely likely that\n" -#. "the package is simply not installable and a bug report against\n" -#. "that package should be filed.") << std::endl; -#. } -#. -#: apt-private/private-install.cc:502 apt-private/private-install.cc:653 -msgid "The following information may help to resolve the situation:" -msgstr "下列信息可能会对解决问题有所帮助：" - -#: apt-private/private-install.cc:506 -msgid "Internal Error, AutoRemover broke stuff" -msgstr "内部错误，自动卸载工具坏事了" +"用法： apt-sortpkgs [选项] 文件甲 [文件乙 ...]\n" +"\n" +"apt-sortpkgs 是对软件包索引文件内容进行排序的简单工具。-s 选项\n" +"是用来指出后面参数所示文件是哪种文件。\n" +"\n" +"选项：\n" +" -h 本帮助文档\n" +" -s 根据源文件排序\n" +" -c=? 读取指定配置文件\n" +" -o=? 设置任意指定的配置选项，例如 -o dir::cache=/tmp\n" -#: apt-private/private-install.cc:513 -msgid "" -"The following package was automatically installed and is no longer required:" -msgid_plural "" -"The following packages were automatically installed and are no longer " -"required:" -msgstr[0] "下列软件包是自动安装的并且现在不需要了：" +msgid "Package extension list is too long" +msgstr "软件包的扩展列表太长" -#: apt-private/private-install.cc:517 #, c-format -msgid "%lu package was automatically installed and is no longer required.\n" -msgid_plural "" -"%lu packages were automatically installed and are no longer required.\n" -msgstr[0] "%lu 个自动安装的的软件包现在已不再需要了。\n" +msgid "Error processing directory %s" +msgstr "处理目录 %s 时出错" -#: apt-private/private-install.cc:519 -msgid "Use 'apt-get autoremove' to remove it." -msgid_plural "Use 'apt-get autoremove' to remove them." -msgstr[0] "使用'apt-get autoremove'来卸载它(它们)。" +msgid "Source extension list is too long" +msgstr "源扩展列表太长" -#: apt-private/private-install.cc:612 -msgid "You might want to run 'apt-get -f install' to correct these:" -msgstr "您可能需要运行“apt-get -f install”来纠正下列错误：" +msgid "Error writing header to contents file" +msgstr "将头写入到目录文件时出错" -#: apt-private/private-install.cc:614 -msgid "" -"Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a " -"solution)." -msgstr "" -"有未能满足的依赖关系。请尝试不指明软件包的名字来运行“apt-get -f install”(也可" -"以指定一个解决办法)。" +#, c-format +msgid "Error processing contents %s" +msgstr "处理目录 %s 时出错" -#: apt-private/private-install.cc:638 msgid "" -"Some packages could not be installed. This may mean that you have\n" -"requested an impossible situation or if you are using the unstable\n" -"distribution that some required packages have not yet been created\n" -"or been moved out of Incoming." +"Usage: apt-ftparchive [options] command\n" +"Commands: packages binarypath [overridefile [pathprefix]]\n" +" sources srcpath [overridefile [pathprefix]]\n" +" contents path\n" +" release path\n" +" generate config [groups]\n" +" clean config\n" +"\n" +"apt-ftparchive generates index files for Debian archives. It supports\n" +"many styles of generation from fully automated to functional replacements\n" +"for dpkg-scanpackages and dpkg-scansources\n" +"\n" +"apt-ftparchive generates Package files from a tree of .debs. The\n" +"Package file contains the contents of all the control fields from\n" +"each package as well as the MD5 hash and filesize. An override file\n" +"is supported to force the value of Priority and Section.\n" +"\n" +"Similarly apt-ftparchive generates Sources files from a tree of .dscs.\n" +"The --source-override option can be used to specify a src override file\n" +"\n" +"The 'packages' and 'sources' command should be run in the root of the\n" +"tree. BinaryPath should point to the base of the recursive search and \n" +"override file should contain the override flags. Pathprefix is\n" +"appended to the filename fields if present. Example usage from the \n" +"Debian archive:\n" +" apt-ftparchive packages dists/potato/main/binary-i386/ > \\\n" +" dists/potato/main/binary-i386/Packages\n" +"\n" +"Options:\n" +" -h This help text\n" +" --md5 Control MD5 generation\n" +" -s=? Source override file\n" +" -q Quiet\n" +" -d=? Select the optional caching database\n" +" --no-delink Enable delinking debug mode\n" +" --contents Control contents file generation\n" +" -c=? Read this configuration file\n" +" -o=? Set an arbitrary configuration option" msgstr "" -"有一些软件包无法被安装。如果您用的是 unstable 发行版，这也许是\n" -"因为系统无法达到您要求的状态造成的。该版本中可能会有一些您需要的软件\n" -"包尚未被创建或是它们已被从新到(Incoming)目录移出。" - -#: apt-private/private-install.cc:659 -msgid "Broken packages" -msgstr "破损的软件包" - -#: apt-private/private-install.cc:712 -msgid "The following extra packages will be installed:" -msgstr "将会安装下列额外的软件包：" - -#: apt-private/private-install.cc:802 -msgid "Suggested packages:" -msgstr "建议安装的软件包：" - -#: apt-private/private-install.cc:803 -msgid "Recommended packages:" -msgstr "推荐安装的软件包：" - -#: apt-private/private-install.cc:825 -#, c-format -msgid "Skipping %s, it is already installed and upgrade is not set.\n" -msgstr "忽略了 %s，它已经被安装而且没有指定要升级。\n" +"用法： apt-ftparchive [选项] 命令\n" +"命令： packages 二进制软件包搜索路径 [overridefile [路径前缀]]\n" +" sources 源代码包搜索路径 [overridefile [路径前缀]]\n" +" contents 搜索路径\n" +" release 搜索路径\n" +" generate 配置文件 [groups]\n" +" clean 配置文件\n" +"\n" +"apt-ftparchive 被用来为 Debian 软件包生成索引文件。它能支持\n" +"多种生成索引的方式，从全自动的索引生成到在功能上取代 dpkg-scanpackages \n" +"和 dpkg-scansources，都能游刃有余\n" +"\n" +"apt-ftparchive 能依据一个由 .deb 文件构成的文件树生成 Package 文件。\n" +"Package 文件里不仅注有每个软件包的 MD5 校验码和文件大小，\n" +"还有软件包的所有控制字段的内容。该软件同时支持 override 文件，\n" +"通过它可以强制指定软件包的优先级及其所属的软件类别。\n" +"\n" +"与上面类似，apt-ftparchive 也能由 .dsc 的文件树生成 Source 文件。\n" +"可以通过使用 --source-override 选项来指定一个 override 文件\n" +"\n" +"使用“packages”和“source”命令时，必须在文件树的根部执行本程序。\n" +"二进制包的搜索路径一定要是递归搜索的底层，而且 override 文件里\n" +"应该注明 override 的标志。若指定了路径前缀，那么它会被加到文件名前面。\n" +"下面有个来自 Debian 文档的例子：\n" +" apt-ftparchive packages dists/potato/main/binary-i386 > \\\n" +" dists/potato/main/binary-i386/Packages\n" +"\n" +"选项:\n" +" -h 本帮助文档\n" +" --md5 使之生成 MD5 校验和\n" +" -s=? 源代码包 override 文件\n" +" -q 输出精简信息\n" +" -d=? 指定可选的缓存数据库\n" +" -d=? 使用另一个可选的缓存数据库\n" +" --no-delink 开启delink的调试模式\n" +" --contents 使之生成控制内容文件\n" +" -c=? 读取指定配置文件\n" +" -o=? 设置任意指定的配置选项" -#: apt-private/private-install.cc:829 -#, c-format -msgid "Skipping %s, it is not installed and only upgrades are requested.\n" -msgstr "忽略了 %s，它已经被安装而且仅请求了升级。\n" +msgid "No selections matched" +msgstr "没有任何选定项是匹配的" -#: apt-private/private-install.cc:841 #, c-format -msgid "Reinstallation of %s is not possible, it cannot be downloaded.\n" -msgstr "不能重新安装 %s，因为无法下载它。\n" +msgid "Some files are missing in the package file group `%s'" +msgstr "软件包文件组“%s”中缺少一些文件" -#: apt-private/private-install.cc:846 #, c-format -msgid "%s is already the newest version.\n" -msgstr "%s 已经是最新的版本。\n" +msgid "DB was corrupted, file renamed to %s.old" +msgstr "数据库被损坏，该数据库文件的文件名已改成 %s.old" -#: apt-private/private-install.cc:894 #, c-format -msgid "Selected version '%s' (%s) for '%s'\n" -msgstr "为 %3$s 选定了版本 %1$s (%2$s)\n" +msgid "DB is old, attempting to upgrade %s" +msgstr "数据库已过期，现尝试进行升级 %s" -#: apt-private/private-install.cc:899 -#, c-format -msgid "Selected version '%s' (%s) for '%s' because of '%s'\n" -msgstr "由于 %4$s，为 %3$s 选定了版本 %1$s (%2$s)\n" +msgid "" +"DB format is invalid. If you upgraded from an older version of apt, please " +"remove and re-create the database." +msgstr "" +"数据库格式无效。如果您是从一个老版本的 apt 升级而来，请删除数据库并重建它。" -#. TRANSLATORS: Note, this is not an interactive question -#: apt-private/private-install.cc:941 #, c-format -msgid "Package '%s' is not installed, so not removed. Did you mean '%s'?\n" -msgstr "软件包 %s 还未安装，因而不会被卸载。您的意思是 ‘%s’ 吗？\n" +msgid "Unable to open DB file %s: %s" +msgstr "无法打开数据库文件 %s：%s" -#: apt-private/private-install.cc:947 #, c-format -msgid "Package '%s' is not installed, so not removed\n" -msgstr "软件包 %s 还未安装，因而不会被卸载\n" - -#: apt-private/private-download.cc:36 -msgid "WARNING: The following packages cannot be authenticated!" -msgstr "【警告】：下列软件包不能通过验证！" +msgid "Failed to stat %s" +msgstr "无法获得 %s 的状态" -#: apt-private/private-download.cc:40 -msgid "Authentication warning overridden.\n" -msgstr "忽略了认证警告。\n" +msgid "Failed to read .dsc" +msgstr "读取 .dsc 文件失败" -#: apt-private/private-download.cc:45 apt-private/private-download.cc:52 -msgid "Some packages could not be authenticated" -msgstr "有些软件包不能通过验证" +msgid "Archive has no control record" +msgstr "归档文件没有包含控制字段" -#: apt-private/private-download.cc:50 -msgid "Install these packages without verification?" -msgstr "不经验证就安装这些软件包吗？" +msgid "Unable to get a cursor" +msgstr "无法获得游标" -#: apt-private/private-download.cc:91 apt-pkg/update.cc:77 -#, c-format -msgid "Failed to fetch %s %s\n" -msgstr "无法下载 %s %s\n" +msgid "realloc - Failed to allocate memory" +msgstr "realloc - 分配内存失败" -#: apt-private/private-sources.cc:58 #, c-format -msgid "Failed to parse %s. Edit again? " -msgstr "解析 %s 失败。请重新编辑之后再试。" +msgid "Unknown compression algorithm '%s'" +msgstr "未知的压缩算法“%s”" -#: apt-private/private-sources.cc:70 #, c-format -msgid "Your '%s' file changed, please run 'apt-get update'." -msgstr "您的 %s 文件有过改动，请执行 ‘apt-get update’。" - -#: apt-private/private-search.cc:69 -msgid "Full Text Search" -msgstr "全文搜索" +msgid "Compressed output %s needs a compression set" +msgstr "压缩后的输出文件 %s 要求有一个压缩文件集合" -#: apt-private/private-upgrade.cc:25 -msgid "Calculating upgrade... " -msgstr "正在对升级进行计算... " +msgid "Failed to create FILE*" +msgstr "无法创建 FILE*" -#: apt-private/private-upgrade.cc:28 -msgid "Done" -msgstr "完成" +msgid "Failed to fork" +msgstr "无法 fork" -#: apt-private/acqprogress.cc:66 -msgid "Hit " -msgstr "命中 " +msgid "Compress child" +msgstr "压缩子进程" -#: apt-private/acqprogress.cc:90 -msgid "Get:" -msgstr "获取：" +#, c-format +msgid "Internal error, failed to create %s" +msgstr "内部错误，无法创建 %s" -#: apt-private/acqprogress.cc:121 -msgid "Ign " -msgstr "忽略 " +msgid "IO to subprocess/file failed" +msgstr "无法对子进程或文件进行读写" -#: apt-private/acqprogress.cc:125 -msgid "Err " -msgstr "错误 " +msgid "Failed to read while computing MD5" +msgstr "在计算 MD5 校验和时无法读取数据" -#: apt-private/acqprogress.cc:146 #, c-format -msgid "Fetched %sB in %s (%sB/s)\n" -msgstr "下载 %sB，耗时 %s (%sB/s)\n" +msgid "Problem unlinking %s" +msgstr "在使用 unlink 删除 %s 时出错" -#: apt-private/acqprogress.cc:236 #, c-format -msgid " [Working]" -msgstr " [执行中]" +msgid "Failed to rename %s to %s" +msgstr "无法将 %s 重命名为 %s" -#: apt-private/acqprogress.cc:297 #, c-format -msgid "" -"Media change: please insert the disc labeled\n" -" '%s'\n" -"in the drive '%s' and press enter\n" -msgstr "" -"更换介质：请把标有\n" -"“%s”\n" -"的盘片插入驱动器“%s”再按回车键\n" +msgid "Unable to open %s" +msgstr "无法打开 %s" -#. Only warn if there are no sources.list.d. -#. Only warn if there is no sources.list file. -#: methods/mirror.cc:95 apt-inst/extract.cc:471 apt-pkg/init.cc:103 -#: apt-pkg/init.cc:111 apt-pkg/sourcelist.cc:280 apt-pkg/sourcelist.cc:286 -#: apt-pkg/clean.cc:43 apt-pkg/acquire.cc:494 apt-pkg/policy.cc:381 -#: apt-pkg/contrib/fileutl.cc:368 apt-pkg/contrib/fileutl.cc:481 -#: apt-pkg/contrib/cdromutl.cc:205 +#. skip spaces +#. find end of word #, c-format -msgid "Unable to read %s" -msgstr "无法读取 %s" +msgid "Malformed override %s line %llu (%s)" +msgstr "override 文件 %s 第 %llu (%s) 行的格式有误" -#: methods/mirror.cc:101 methods/mirror.cc:130 apt-pkg/clean.cc:49 -#: apt-pkg/clean.cc:67 apt-pkg/clean.cc:130 apt-pkg/acquire.cc:500 -#: apt-pkg/acquire.cc:525 apt-pkg/contrib/cdromutl.cc:201 -#: apt-pkg/contrib/cdromutl.cc:235 #, c-format -msgid "Unable to change to %s" -msgstr "无法切换工作目录到 %s" +msgid "Failed to read the override file %s" +msgstr "无法读取 override 文件 %s" -#. FIXME: fallback to a default mirror here instead -#. and provide a config option to define that default -#: methods/mirror.cc:280 #, c-format -msgid "No mirror file '%s' found " -msgstr "没有找到镜像文件 %s" +msgid "Malformed override %s line %llu #1" +msgstr "override 文件 %s 第 %llu 行的格式有误 #1" -#. FIXME: fallback to a default mirror here instead -#. and provide a config option to define that default -#: methods/mirror.cc:287 #, c-format -msgid "Can not read mirror file '%s'" -msgstr "无法读取镜像文件 %s" +msgid "Malformed override %s line %llu #2" +msgstr "override 文件 %s 第 %llu 行的格式有误 #2" -#: methods/mirror.cc:315 #, c-format -msgid "No entry found in mirror file '%s'" -msgstr "在镜像文件 %s 中未找到所需条目" +msgid "Malformed override %s line %llu #3" +msgstr "override 文件 %s 第 %llu 行的格式有误 #3" -#: methods/mirror.cc:445 #, c-format -msgid "[Mirror: %s]" -msgstr "[镜像：%s]" - -#: methods/rsh.cc:102 ftparchive/multicompress.cc:171 -msgid "Failed to create IPC pipe to subprocess" -msgstr "无法为子进程创建 IPC 管道" - -#: methods/rsh.cc:346 -msgid "Connection closed prematurely" -msgstr "连接被永久关闭" - -#: dselect/install:33 -msgid "Bad default setting!" -msgstr "错误的默认设置！" - -#: dselect/install:52 dselect/install:84 dselect/install:88 dselect/install:95 -#: dselect/install:106 dselect/update:45 -msgid "Press enter to continue." -msgstr "按回车键继续。" - -#: dselect/install:92 -msgid "Do you want to erase any previously downloaded .deb files?" -msgstr "您想要删除之前下载的所有 .deb 文件吗？" - -#: dselect/install:102 -msgid "Some errors occurred while unpacking. Packages that were installed" -msgstr "在解包时发生了一些错误。已经安装的软件包" - -#: dselect/install:103 -msgid "will be configured. This may result in duplicate errors" -msgstr "将被配置。这个操作可能会导致出现重复的错误" - -#: dselect/install:104 -msgid "or errors caused by missing dependencies. This is OK, only the errors" -msgstr "或一些由于依赖关系不能满足所产生的错误。这个问题不大，只有" - -#: dselect/install:105 -msgid "" -"above this message are important. Please fix them and run [I]nstall again" -msgstr "这个提示之前的错误消息才值得您注意。请更正它们，然后再次执行 [I]nstall" - -#: dselect/update:30 -msgid "Merging available information" -msgstr "正在合并可用信息" - -#: apt-inst/filelist.cc:380 -msgid "DropNode called on still linked node" -msgstr "把 DropNode 用在了仍在链表中的节点上" - -#: apt-inst/filelist.cc:412 -msgid "Failed to locate the hash element!" -msgstr "无法定位哈希表元素！" - -#: apt-inst/filelist.cc:459 -msgid "Failed to allocate diversion" -msgstr "无法分配转移项" - -#: apt-inst/filelist.cc:464 -msgid "Internal error in AddDiversion" -msgstr "内部错误，出现在 AddDiversion" +msgid "W: Unable to read directory %s\n" +msgstr "警告：无法读取目录 %s\n" -#: apt-inst/filelist.cc:477 #, c-format -msgid "Trying to overwrite a diversion, %s -> %s and %s/%s" -msgstr "尝试覆盖一个转移项，%s -> %s 和 %s/%s" +msgid "W: Unable to stat %s\n" +msgstr "警告：无法获得 %s 的状态\n" -#: apt-inst/filelist.cc:506 -#, c-format -msgid "Double add of diversion %s -> %s" -msgstr "添加了两个转移项 %s-> %s" +msgid "E: " +msgstr "错误：" -#: apt-inst/filelist.cc:549 -#, c-format -msgid "Duplicate conf file %s/%s" -msgstr "重复的配置文件 %s/%s" +msgid "W: " +msgstr "警告：" -#: apt-inst/extract.cc:101 apt-inst/extract.cc:172 -#, c-format -msgid "The path %s is too long" -msgstr "路径名 %s 太长" +msgid "E: Errors apply to file " +msgstr "错误：处理文件时出错 " -#: apt-inst/extract.cc:132 #, c-format -msgid "Unpacking %s more than once" -msgstr "%s 被解包了不只一次" +msgid "Failed to resolve %s" +msgstr "无法解析 %s" -#: apt-inst/extract.cc:142 -#, c-format -msgid "The directory %s is diverted" -msgstr "目录 %s 已被转移" +msgid "Tree walking failed" +msgstr "无法遍历目录树" -#: apt-inst/extract.cc:152 #, c-format -msgid "The package is trying to write to the diversion target %s/%s" -msgstr "该软件包正尝试写入转移对象 %s/%s" - -#: apt-inst/extract.cc:162 apt-inst/extract.cc:306 -msgid "The diversion path is too long" -msgstr "该转移路径太长" +msgid "Failed to open %s" +msgstr "无法打开 %s" -#: apt-inst/extract.cc:186 apt-inst/extract.cc:199 apt-inst/extract.cc:216 -#: ftparchive/cachedb.cc:182 #, c-format -msgid "Failed to stat %s" -msgstr "无法获得 %s 的状态" +msgid " DeLink %s [%s]\n" +msgstr " DeLink %s [%s]\n" -#: apt-inst/extract.cc:194 ftparchive/multicompress.cc:374 #, c-format -msgid "Failed to rename %s to %s" -msgstr "无法将 %s 重命名为 %s" +msgid "Failed to readlink %s" +msgstr "无法读取符号链接 %s" -#: apt-inst/extract.cc:249 #, c-format -msgid "The directory %s is being replaced by a non-directory" -msgstr "目录 %s 要被一个非目录的文件替换" - -#: apt-inst/extract.cc:289 -msgid "Failed to locate node in its hash bucket" -msgstr "无法在其散列桶中分配节点" - -#: apt-inst/extract.cc:293 -msgid "The path is too long" -msgstr "路径名太长" +msgid "Failed to unlink %s" +msgstr "无法使用 unlink 删除 %s" -#: apt-inst/extract.cc:421 #, c-format -msgid "Overwrite package match with no version for %s" -msgstr "用来覆盖的软件包不属于 %s 的任何版本" +msgid "*** Failed to link %s to %s" +msgstr "*** 无法将 %s 链接到 %s" -#: apt-inst/extract.cc:438 #, c-format -msgid "File %s/%s overwrites the one in the package %s" -msgstr "文件 %s/%s 会覆盖属于软件包 %s 中的同名文件" +msgid " DeLink limit of %sB hit.\n" +msgstr " 达到了 DeLink 的上限 %sB。\n" -#: apt-inst/extract.cc:498 -#, c-format -msgid "Unable to stat %s" -msgstr "无法读取 %s 的状态" +msgid "Archive had no package field" +msgstr "归档文件没有包含 package 字段" -#: apt-inst/dirstream.cc:42 apt-inst/dirstream.cc:49 apt-inst/dirstream.cc:54 #, c-format -msgid "Failed to write file %s" -msgstr "无法写入文件 %s" +msgid " %s has no override entry\n" +msgstr " %s 中没有 override 项\n" -#: apt-inst/dirstream.cc:105 #, c-format -msgid "Failed to close file %s" -msgstr "无法关闭文件 %s" +msgid " %s maintainer is %s not %s\n" +msgstr " %s 的维护者 %s 并非 %s\n" -#: apt-inst/deb/debfile.cc:47 apt-inst/deb/debfile.cc:54 -#: apt-inst/deb/debfile.cc:63 #, c-format -msgid "This is not a valid DEB archive, missing '%s' member" -msgstr "这不是一个有效的 DEB 包文件，其包内遗漏了“%s”" +msgid " %s has no source override entry\n" +msgstr " %s 没有源代码的 override 项\n" -#: apt-inst/deb/debfile.cc:132 #, c-format -msgid "Internal error, could not locate member %s" -msgstr "内部错误，无法定位包内文件 %s" - -#: apt-inst/deb/debfile.cc:227 -msgid "Unparsable control file" -msgstr "不能解析的主控文件" +msgid " %s has no binary override entry either\n" +msgstr " %s 中没有二进制文件的 override 项\n" -#: apt-inst/contrib/arfile.cc:76 msgid "Invalid archive signature" msgstr "无效的归档签名" -#: apt-inst/contrib/arfile.cc:84 msgid "Error reading archive member header" msgstr "读取归档成员文件头出错" -#: apt-inst/contrib/arfile.cc:96 #, c-format msgid "Invalid archive member header %s" msgstr "归档文件中成员文件头 %s 无效" -#: apt-inst/contrib/arfile.cc:108 msgid "Invalid archive member header" msgstr "归档文件中成员文件头无效" -#: apt-inst/contrib/arfile.cc:137 msgid "Archive is too short" msgstr "归档文件太短" -#: apt-inst/contrib/arfile.cc:141 msgid "Failed to read the archive headers" msgstr "无法读取归档文件的数据头" -#: apt-inst/contrib/extracttar.cc:124 msgid "Failed to create pipes" msgstr "无法创建管道" -#: apt-inst/contrib/extracttar.cc:151 msgid "Failed to exec gzip " msgstr "无法执行 gzip" -#: apt-inst/contrib/extracttar.cc:188 apt-inst/contrib/extracttar.cc:218 msgid "Corrupted archive" msgstr "包文件已被损坏" -#: apt-inst/contrib/extracttar.cc:203 msgid "Tar checksum failed, archive corrupted" msgstr "Tar 的校验和不符，文件已损坏" -#: apt-inst/contrib/extracttar.cc:308 #, c-format msgid "Unknown TAR header type %u, member %s" msgstr "未知的 TAR 数据头类型 %u，成员 %s" -#: apt-pkg/install-progress.cc:57 #, c-format -msgid "Progress: [%3i%%]" -msgstr "进度：[%3i%%]" - -#: apt-pkg/install-progress.cc:91 apt-pkg/install-progress.cc:174 -msgid "Running dpkg" -msgstr "正在运行 dpkg" - -#: apt-pkg/init.cc:146 -#, c-format -msgid "Packaging system '%s' is not supported" -msgstr "不支持“%s”打包系统" - -#: apt-pkg/init.cc:162 -msgid "Unable to determine a suitable packaging system type" -msgstr "无法确定适合的打包系统类型" - -#: apt-pkg/indexcopy.cc:236 apt-pkg/indexcopy.cc:773 -#, c-format -msgid "Wrote %i records.\n" -msgstr "已写入 %i 条记录。\n" - -#: apt-pkg/indexcopy.cc:238 apt-pkg/indexcopy.cc:775 -#, c-format -msgid "Wrote %i records with %i missing files.\n" -msgstr "已写入 %i 条记录，并有 %i 个文件缺失。\n" - -#: apt-pkg/indexcopy.cc:241 apt-pkg/indexcopy.cc:778 -#, c-format -msgid "Wrote %i records with %i mismatched files\n" -msgstr "已写入 %i 条记录，并有 %i 个文件不匹配\n" - -#: apt-pkg/indexcopy.cc:244 apt-pkg/indexcopy.cc:781 -#, c-format -msgid "Wrote %i records with %i missing files and %i mismatched files\n" -msgstr "已写入 %i 条记录，并有 %i 个缺失，以及 %i 个文件不匹配\n" - -#: apt-pkg/indexcopy.cc:515 -#, c-format -msgid "Can't find authentication record for: %s" -msgstr "无法找到认证记录：%s" - -#: apt-pkg/indexcopy.cc:521 -#, c-format -msgid "Hash mismatch for: %s" -msgstr "Hash 校验和不符：%s" - -#: apt-pkg/acquire-worker.cc:116 -#, c-format -msgid "The method driver %s could not be found." -msgstr "无法找到获取软件包的渠道 %s 所需的驱动程序。" - -#: apt-pkg/acquire-worker.cc:118 -#, c-format -msgid "Is the package %s installed?" -msgstr "请检查是否安装了 %s 软件包" - -#: apt-pkg/acquire-worker.cc:169 -#, c-format -msgid "Method %s did not start correctly" -msgstr "获取软件包的渠道 %s 所需的驱动程序没有正常启动。" - -#: apt-pkg/acquire-worker.cc:455 -#, c-format -msgid "Please insert the disc labeled: '%s' in the drive '%s' and press enter." -msgstr "请把标有“%s”的盘片插入驱动器“%s”再按回车键。" - -#: apt-pkg/cachefile.cc:94 -msgid "The package lists or status file could not be parsed or opened." -msgstr "无法解析或打开软件包的列表或是状态文件。" - -#: apt-pkg/cachefile.cc:98 -msgid "You may want to run apt-get update to correct these problems" -msgstr "您可能需要运行 apt-get update 来解决这些问题" - -#: apt-pkg/cachefile.cc:116 -msgid "The list of sources could not be read." -msgstr "无法读取源列表。" - -#: apt-pkg/pkgcache.cc:155 -msgid "Empty package cache" -msgstr "软件包缓存区是空的" - -#: apt-pkg/pkgcache.cc:161 -msgid "The package cache file is corrupted" -msgstr "软件包缓存文件损坏了" - -#: apt-pkg/pkgcache.cc:166 -msgid "The package cache file is an incompatible version" -msgstr "软件包缓存区文件的版本不兼容" - -#: apt-pkg/pkgcache.cc:169 -msgid "The package cache file is corrupted, it is too small" -msgstr "软件包缓存文件损坏，它太小了" - -#: apt-pkg/pkgcache.cc:174 -#, c-format -msgid "This APT does not support the versioning system '%s'" -msgstr "本程序目前不支持“%s”版本系统" - -#: apt-pkg/pkgcache.cc:179 -msgid "The package cache was built for a different architecture" -msgstr "软件包缓存区是为其它架构的硬件构建的" - -#: apt-pkg/pkgcache.cc:321 -msgid "Depends" -msgstr "依赖" - -#: apt-pkg/pkgcache.cc:321 -msgid "PreDepends" -msgstr "预依赖" - -#: apt-pkg/pkgcache.cc:321 -msgid "Suggests" -msgstr "建议" - -#: apt-pkg/pkgcache.cc:322 -msgid "Recommends" -msgstr "推荐" - -#: apt-pkg/pkgcache.cc:322 -msgid "Conflicts" -msgstr "冲突" - -#: apt-pkg/pkgcache.cc:322 -msgid "Replaces" -msgstr "替换" - -#: apt-pkg/pkgcache.cc:323 -msgid "Obsoletes" -msgstr "废弃" - -#: apt-pkg/pkgcache.cc:323 -msgid "Breaks" -msgstr "破坏" - -#: apt-pkg/pkgcache.cc:323 -msgid "Enhances" -msgstr "增强" - -#: apt-pkg/pkgcache.cc:334 -msgid "important" -msgstr "重要" - -#: apt-pkg/pkgcache.cc:334 -msgid "required" -msgstr "必需" - -#: apt-pkg/pkgcache.cc:334 -msgid "standard" -msgstr "标准" - -#: apt-pkg/pkgcache.cc:335 -msgid "optional" -msgstr "可选" - -#: apt-pkg/pkgcache.cc:335 -msgid "extra" -msgstr "额外" - -#: apt-pkg/pkgrecords.cc:38 -#, c-format -msgid "Index file type '%s' is not supported" -msgstr "不支持索引文件类型“%s”" - -#: apt-pkg/sourcelist.cc:127 -#, c-format -msgid "Malformed stanza %u in source list %s (URI parse)" -msgstr "安装源配置文件“%2$s”第 %1$u 节有错误(URI 解析)" - -#: apt-pkg/sourcelist.cc:170 -#, c-format -msgid "Malformed line %lu in source list %s ([option] unparseable)" -msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误([选项] 无法解析)" - -#: apt-pkg/sourcelist.cc:173 -#, c-format -msgid "Malformed line %lu in source list %s ([option] too short)" -msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误([选项] 太短)" - -#: apt-pkg/sourcelist.cc:184 -#, c-format -msgid "Malformed line %lu in source list %s ([%s] is not an assignment)" -msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误([%3$s] 不是一个任务)" +msgid "This is not a valid DEB archive, missing '%s' member" +msgstr "这不是一个有效的 DEB 包文件，其包内遗漏了“%s”" -#: apt-pkg/sourcelist.cc:190 #, c-format -msgid "Malformed line %lu in source list %s ([%s] has no key)" -msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误([%3$s] 没有键)" +msgid "Internal error, could not locate member %s" +msgstr "内部错误，无法定位包内文件 %s" -#: apt-pkg/sourcelist.cc:193 -#, c-format -msgid "Malformed line %lu in source list %s ([%s] key %s has no value)" -msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误([%3$s] 键 %4$s 没有值)" +msgid "Unparsable control file" +msgstr "不能解析的主控文件" -#: apt-pkg/sourcelist.cc:206 #, c-format -msgid "Malformed line %lu in source list %s (URI)" -msgstr "安装源配置文件“%2$s”第 %1$lu 行的格式有误(URI)" +msgid "Failed to write file %s" +msgstr "无法写入文件 %s" -#: apt-pkg/sourcelist.cc:208 #, c-format -msgid "Malformed line %lu in source list %s (dist)" -msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误(发行版)" +msgid "Failed to close file %s" +msgstr "无法关闭文件 %s" -#: apt-pkg/sourcelist.cc:211 #, c-format -msgid "Malformed line %lu in source list %s (URI parse)" -msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误(URI 解析)" +msgid "The path %s is too long" +msgstr "路径名 %s 太长" -#: apt-pkg/sourcelist.cc:217 #, c-format -msgid "Malformed line %lu in source list %s (absolute dist)" -msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误(独立发行版)" +msgid "Unpacking %s more than once" +msgstr "%s 被解包了不只一次" -#: apt-pkg/sourcelist.cc:224 #, c-format -msgid "Malformed line %lu in source list %s (dist parse)" -msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误(发行版解析)" +msgid "The directory %s is diverted" +msgstr "目录 %s 已被转移" -#: apt-pkg/sourcelist.cc:335 #, c-format -msgid "Opening %s" -msgstr "正在打开 %s" +msgid "The package is trying to write to the diversion target %s/%s" +msgstr "该软件包正尝试写入转移对象 %s/%s" -#: apt-pkg/sourcelist.cc:347 apt-pkg/cdrom.cc:497 -#, c-format -msgid "Line %u too long in source list %s." -msgstr "源列表 %2$s 的第 %1$u 行太长了。" +msgid "The diversion path is too long" +msgstr "该转移路径太长" -#: apt-pkg/sourcelist.cc:371 #, c-format -msgid "Malformed line %u in source list %s (type)" -msgstr "在源列表 %2$s 中第 %1$u 行的格式有误(类型)" +msgid "The directory %s is being replaced by a non-directory" +msgstr "目录 %s 要被一个非目录的文件替换" -#: apt-pkg/sourcelist.cc:375 -#, c-format -msgid "Type '%s' is not known on line %u in source list %s" -msgstr "无法识别在源列表 %3$s 里，第 %2$u 行中的软件包类别“%1$s”" +msgid "Failed to locate node in its hash bucket" +msgstr "无法在其散列桶中分配节点" -#: apt-pkg/sourcelist.cc:416 -#, c-format -msgid "Type '%s' is not known on stanza %u in source list %s" -msgstr "无法识别在源列表 %3$s 里，第 %2$u 节中的软件包类别“%1$s”" +msgid "The path is too long" +msgstr "路径名太长" -#: apt-pkg/clean.cc:39 apt-pkg/acquire.cc:490 #, c-format -msgid "Clean of %s is not supported" -msgstr "%s 的 Clean (清理)不被支持" +msgid "Overwrite package match with no version for %s" +msgstr "用来覆盖的软件包不属于 %s 的任何版本" -#: apt-pkg/clean.cc:64 #, c-format -msgid "Unable to stat %s." -msgstr "无法读取 %s 的状态。" - -#: apt-pkg/pkgcachegen.cc:93 -msgid "Cache has an incompatible versioning system" -msgstr "软件包暂存区使用的是不兼容的版本控制系统" +msgid "File %s/%s overwrites the one in the package %s" +msgstr "文件 %s/%s 会覆盖属于软件包 %s 中的同名文件" -#. TRANSLATOR: The first placeholder is a package name, -#. the other two should be copied verbatim as they include debug info -#: apt-pkg/pkgcachegen.cc:224 apt-pkg/pkgcachegen.cc:234 -#: apt-pkg/pkgcachegen.cc:300 apt-pkg/pkgcachegen.cc:327 -#: apt-pkg/pkgcachegen.cc:340 apt-pkg/pkgcachegen.cc:382 -#: apt-pkg/pkgcachegen.cc:386 apt-pkg/pkgcachegen.cc:403 -#: apt-pkg/pkgcachegen.cc:411 apt-pkg/pkgcachegen.cc:415 -#: apt-pkg/pkgcachegen.cc:419 apt-pkg/pkgcachegen.cc:440 -#: apt-pkg/pkgcachegen.cc:479 apt-pkg/pkgcachegen.cc:517 -#: apt-pkg/pkgcachegen.cc:524 apt-pkg/pkgcachegen.cc:555 -#: apt-pkg/pkgcachegen.cc:569 #, c-format -msgid "Error occurred while processing %s (%s%d)" -msgstr "处理 %s (%s%d) 时出错" +msgid "Unable to stat %s" +msgstr "无法读取 %s 的状态" -#: apt-pkg/pkgcachegen.cc:257 -msgid "Wow, you exceeded the number of package names this APT is capable of." -msgstr "哇，软件包数量超出了本 APT 的处理能力。" +msgid "DropNode called on still linked node" +msgstr "把 DropNode 用在了仍在链表中的节点上" -#: apt-pkg/pkgcachegen.cc:260 -msgid "Wow, you exceeded the number of versions this APT is capable of." -msgstr "哇，软件包版本数量超出了本 APT 的处理能力。" +msgid "Failed to locate the hash element!" +msgstr "无法定位哈希表元素！" -#: apt-pkg/pkgcachegen.cc:263 -msgid "Wow, you exceeded the number of descriptions this APT is capable of." -msgstr "哇，软件包说明数量超出了本 APT 的处理能力。" +msgid "Failed to allocate diversion" +msgstr "无法分配转移项" -#: apt-pkg/pkgcachegen.cc:266 -msgid "Wow, you exceeded the number of dependencies this APT is capable of." -msgstr "哇，依赖关系数量超出了本 APT 的处理能力。" +msgid "Internal error in AddDiversion" +msgstr "内部错误，出现在 AddDiversion" -#: apt-pkg/pkgcachegen.cc:576 #, c-format -msgid "Package %s %s was not found while processing file dependencies" -msgstr "当处理文件依赖关系时，无法找到软件包 %s %s" +msgid "Trying to overwrite a diversion, %s -> %s and %s/%s" +msgstr "尝试覆盖一个转移项，%s -> %s 和 %s/%s" -#: apt-pkg/pkgcachegen.cc:1211 #, c-format -msgid "Couldn't stat source package list %s" -msgstr "无法获取源软件包列表 %s 的状态" - -#: apt-pkg/pkgcachegen.cc:1299 apt-pkg/pkgcachegen.cc:1403 -#: apt-pkg/pkgcachegen.cc:1409 apt-pkg/pkgcachegen.cc:1566 -msgid "Reading package lists" -msgstr "正在读取软件包列表" - -#: apt-pkg/pkgcachegen.cc:1316 -msgid "Collecting File Provides" -msgstr "正在收集文件所提供的软件包" +msgid "Double add of diversion %s -> %s" +msgstr "添加了两个转移项 %s-> %s" -#: apt-pkg/pkgcachegen.cc:1400 cmdline/apt-extracttemplates.cc:259 #, c-format -msgid "Unable to write to %s" -msgstr "无法写入 %s" - -#: apt-pkg/pkgcachegen.cc:1508 apt-pkg/pkgcachegen.cc:1515 -msgid "IO Error saving source cache" -msgstr "无法读取或写入软件源缓存" - -#: apt-pkg/edsp.cc:52 apt-pkg/edsp.cc:78 -msgid "Send scenario to solver" -msgstr "向solver发送情景" - -#: apt-pkg/edsp.cc:241 -msgid "Send request to solver" -msgstr "向solver发送请求" - -#: apt-pkg/edsp.cc:320 -msgid "Prepare for receiving solution" -msgstr "准备接收解决方案" - -#: apt-pkg/edsp.cc:327 -msgid "External solver failed without a proper error message" -msgstr "外部solver出错，错误信息不恰当" - -#: apt-pkg/edsp.cc:619 apt-pkg/edsp.cc:622 apt-pkg/edsp.cc:627 -msgid "Execute external solver" -msgstr "执行外部solver" +msgid "Duplicate conf file %s/%s" +msgstr "重复的配置文件 %s/%s" -#: apt-pkg/acquire-item.cc:148 apt-pkg/contrib/fileutl.cc:2047 #, c-format msgid "rename failed, %s (%s -> %s)." msgstr "无法重命名文件，%s (%s -> %s)。" -#: apt-pkg/acquire-item.cc:163 msgid "Hash Sum mismatch" msgstr "Hash 校验和不符" -#: apt-pkg/acquire-item.cc:168 msgid "Size mismatch" msgstr "大小不符" -#: apt-pkg/acquire-item.cc:173 msgid "Invalid file format" msgstr "无效的文件格式 %s" -#: apt-pkg/acquire-item.cc:1650 #, c-format msgid "" "Unable to find expected entry '%s' in Release file (Wrong sources.list entry " @@ -2337,16 +1971,13 @@ msgid "" msgstr "" "在 Release 文件中找不到期望的条目 %s（sources.list条目有误，或者文件有误）" -#: apt-pkg/acquire-item.cc:1666 #, c-format msgid "Unable to find hash sum for '%s' in Release file" msgstr "在 Release 文件中找不到 %s 的哈希值" -#: apt-pkg/acquire-item.cc:1708 msgid "There is no public key available for the following key IDs:\n" msgstr "以下 ID 的密钥没有可用的公钥：\n" -#: apt-pkg/acquire-item.cc:1746 #, c-format msgid "" "Release file for %s is expired (invalid since %s). Updates for this " @@ -2354,12 +1985,10 @@ msgid "" msgstr "" "%s 的 Release 文件已经过期(invalid since %s)。该仓库的更新将不会被应用。" -#: apt-pkg/acquire-item.cc:1768 #, c-format msgid "Conflicting distribution: %s (expected %s but got %s)" msgstr "冲突的发行版：%s (期望 %s 但得到 %s)" -#: apt-pkg/acquire-item.cc:1798 #, c-format msgid "" "An error occurred during the signature verification. The repository is not " @@ -2368,12 +1997,10 @@ msgstr "" "校验签名出错。此仓库未被更新，仍然使用以前的索引文件。GPG 错误：%s: %s\n" #. Invalid signature file, reject (LP: #346386) (Closes: #627642) -#: apt-pkg/acquire-item.cc:1808 apt-pkg/acquire-item.cc:1813 #, c-format msgid "GPG error: %s: %s" msgstr "GPG 错误：%s: %s" -#: apt-pkg/acquire-item.cc:1936 #, c-format msgid "" "I wasn't able to locate a file for the %s package. This might mean you need " @@ -2382,137 +2009,152 @@ msgstr "" "我无法找到一个对应 %s 软件包的文件。在这种情况下可能需要您手动修正这个软件" "包。(缘于架构缺失)" -#: apt-pkg/acquire-item.cc:2002 #, c-format msgid "Can't find a source to download version '%s' of '%s'" msgstr "没有源可以用来下载 %s 版本的 %s" -#: apt-pkg/acquire-item.cc:2060 #, c-format msgid "" "The package index files are corrupted. No Filename: field for package %s." msgstr "软件包的索引文件已损坏。找不到对应软件包 %s 的 Filename: 字段。" -#: apt-pkg/vendorlist.cc:85 #, c-format -msgid "Vendor block %s contains no fingerprint" -msgstr "软件提供者数据块内 %s 没有包含指纹信息" +msgid "The method driver %s could not be found." +msgstr "无法找到获取软件包的渠道 %s 所需的驱动程序。" + +#, c-format +msgid "Is the package %s installed?" +msgstr "请检查是否安装了 %s 软件包" + +#, c-format +msgid "Method %s did not start correctly" +msgstr "获取软件包的渠道 %s 所需的驱动程序没有正常启动。" + +#, c-format +msgid "Please insert the disc labeled: '%s' in the drive '%s' and press enter." +msgstr "请把标有“%s”的盘片插入驱动器“%s”再按回车键。" -#: apt-pkg/acquire.cc:87 apt-pkg/cdrom.cc:829 #, c-format msgid "List directory %spartial is missing." msgstr "软件包列表的目录 %spartial 缺失。" -#: apt-pkg/acquire.cc:91 #, c-format msgid "Archives directory %spartial is missing." msgstr "仓库目录 %spartial 确实。" -#: apt-pkg/acquire.cc:99 #, c-format msgid "Unable to lock directory %s" msgstr "无法对目录 %s 加锁" +#, c-format +msgid "Clean of %s is not supported" +msgstr "%s 的 Clean (清理)不被支持" + #. only show the ETA if it makes sense #. two days -#: apt-pkg/acquire.cc:902 #, c-format msgid "Retrieving file %li of %li (%s remaining)" msgstr "正在下载第 %li 个文件，共 %li 个(还剩 %s 个)" -#: apt-pkg/acquire.cc:904 #, c-format msgid "Retrieving file %li of %li" msgstr "正在下载第 %li 个文件，共 %li 个" -#: apt-pkg/srcrecords.cc:53 -msgid "You must put some 'source' URIs in your sources.list" -msgstr "您必须在您的 sources.list 写入一些“软件源”的 URI" - -#: apt-pkg/policy.cc:83 #, c-format msgid "" -"The value '%s' is invalid for APT::Default-Release as such a release is not " -"available in the sources" +"The package %s needs to be reinstalled, but I can't find an archive for it." +msgstr "软件包 %s 需要重新安装，但是我无法找到相应的安装文件。" + +msgid "" +"Error, pkgProblemResolver::Resolve generated breaks, this may be caused by " +"held packages." msgstr "" -"'%s' 这个值对 APT::Default-Release 是无效的，因为在源里找不到这样的发行" +"错误，pkgProblemResolver::Resolve 发生故障，这可能是有软件包被要求保持现状的" +"缘故。" + +msgid "Unable to correct problems, you have held broken packages." +msgstr "" +"无法修正错误，因为您要求某些软件包保持现状，就是它们破坏了软件包间的依赖关" +"系。" + +msgid "The package lists or status file could not be parsed or opened." +msgstr "无法解析或打开软件包的列表或是状态文件。" + +msgid "You may want to run apt-get update to correct these problems" +msgstr "您可能需要运行 apt-get update 来解决这些问题" + +msgid "The list of sources could not be read." +msgstr "无法读取源列表。" -#: apt-pkg/policy.cc:422 #, c-format -msgid "Invalid record in the preferences file %s, no Package header" -msgstr "首选项文件 %s 中发现有无效的记录，无 Package 字段头" +msgid "Release '%s' for '%s' was not found" +msgstr "未找到“%2$s”的“%1$s”发布版本" -#: apt-pkg/policy.cc:444 #, c-format -msgid "Did not understand pin type %s" -msgstr "无法识别锁定的类型 %s" +msgid "Version '%s' for '%s' was not found" +msgstr "未找到“%2$s”的“%1$s”版本" -#: apt-pkg/policy.cc:452 -msgid "No priority (or zero) specified for pin" -msgstr "没有为版本锁定指定优先级(或为零)" +#, c-format +msgid "Couldn't find task '%s'" +msgstr "无法找到任务 %s" -#: apt-pkg/packagemanager.cc:303 apt-pkg/packagemanager.cc:957 #, c-format -msgid "" -"Could not perform immediate configuration on '%s'. Please see man 5 apt.conf " -"under APT::Immediate-Configure for details. (%d)" -msgstr "" -"无法立即对 %s 进行配置。请查看 man 5 apt.conf 中的 APT::Immediate-Configure " -"(%d)" +msgid "Couldn't find any package by regex '%s'" +msgstr "无法按照正则表达式 %s 找到任何软件包" -#: apt-pkg/packagemanager.cc:550 apt-pkg/packagemanager.cc:580 #, c-format -msgid "Could not configure '%s'. " -msgstr "无法配置 %s。" +msgid "Couldn't find any package by glob '%s'" +msgstr "无法按照 glob ‘%s’ 找到任何软件包" -#: apt-pkg/packagemanager.cc:630 #, c-format -msgid "" -"This installation run will require temporarily removing the essential " -"package %s due to a Conflicts/Pre-Depends loop. This is often bad, but if " -"you really want to do it, activate the APT::Force-LoopBreak option." -msgstr "" -"由于这次安装存在着一个 Conflicts/Pre-Depends 循环，因而需要暂时删除一个必不可" -"少的软件包 %s。通常并不建议这样做，但是如果您确实希望如此，可以打开 APT::" -"Force-LoopBreak 选项。" +msgid "Can't select versions from package '%s' as it is purely virtual" +msgstr "无法从完全虚拟的软件包 %s 中选择版本" -#: apt-pkg/update.cc:103 apt-pkg/update.cc:105 +#, c-format msgid "" -"Some index files failed to download. They have been ignored, or old ones " -"used instead." -msgstr "部分索引文件下载失败。如果忽略它们，那将转而使用旧的索引文件。" +"Can't select installed nor candidate version from package '%s' as it has " +"neither of them" +msgstr "因为软件包 %s 没有已安装或候选的版本，无法进行选择" + +#, c-format +msgid "Can't select newest version from package '%s' as it is purely virtual" +msgstr "因为软件包 %s 是完全的虚拟软件包，无法选择它的最新版" + +#, c-format +msgid "Can't select candidate version from package %s as it has no candidate" +msgstr "因为软件包 %s 没有候选版本，无法进行选择" + +#, c-format +msgid "Can't select installed version from package %s as it is not installed" +msgstr "因为软件包 %s 没有安装，无法选择它的已安装版本" + +#, c-format +msgid "Line %u too long in source list %s." +msgstr "源列表 %2$s 的第 %1$u 行太长了。" -#: apt-pkg/cdrom.cc:571 msgid "Unmounting CD-ROM...\n" msgstr "正在卸载 CD-ROM...\n" -#: apt-pkg/cdrom.cc:586 #, c-format msgid "Using CD-ROM mount point %s\n" msgstr "现把 %s 作为了 CD-ROM 的挂载点\n" -#: apt-pkg/cdrom.cc:599 msgid "Waiting for disc...\n" msgstr "等待插入盘片……\n" -#: apt-pkg/cdrom.cc:609 msgid "Mounting CD-ROM...\n" msgstr "正在挂载 CD-ROM 文件系统……\n" -#: apt-pkg/cdrom.cc:620 msgid "Identifying... " msgstr "正在鉴别... " -#: apt-pkg/cdrom.cc:662 #, c-format msgid "Stored label: %s\n" msgstr "已归档文件的标签：%s\n" -#: apt-pkg/cdrom.cc:680 msgid "Scanning disc for index files...\n" msgstr "正在盘片中查找索引文件...\n" -#: apt-pkg/cdrom.cc:734 #, c-format msgid "" "Found %zu package indexes, %zu source indexes, %zu translation indexes and " @@ -2521,7 +2163,6 @@ msgstr "" "找到了 %zu 个软件包索引、%zu 个源代码包索引、%zu 个翻译索引和 %zu 个数字签" "名\n" -#: apt-pkg/cdrom.cc:744 msgid "" "Unable to locate any package files, perhaps this is not a Debian Disc or the " "wrong architecture?" @@ -2529,16 +2170,13 @@ msgstr "" "无法确定任何包文件的位置，可能这不是一张 Debian 盘片或者是选择了错误的硬件构" "架。" -#: apt-pkg/cdrom.cc:771 #, c-format msgid "Found label '%s'\n" msgstr "找到标签 '%s'\n" -#: apt-pkg/cdrom.cc:800 msgid "That is not a valid name, try again.\n" msgstr "这不是一个有效的名字，请重试。\n" -#: apt-pkg/cdrom.cc:817 #, c-format msgid "" "This disc is called: \n" @@ -2547,345 +2185,225 @@ msgstr "" "这张盘片现在的名字是：\n" "“%s”\n" -#: apt-pkg/cdrom.cc:819 msgid "Copying package lists..." msgstr "正在复制软件包列表……" -#: apt-pkg/cdrom.cc:863 msgid "Writing new source list\n" msgstr "正在写入新的源列表\n" -#: apt-pkg/cdrom.cc:874 msgid "Source list entries for this disc are:\n" msgstr "对应于该盘片的软件源设置项是：\n" -#: apt-pkg/algorithms.cc:265 -#, c-format -msgid "" -"The package %s needs to be reinstalled, but I can't find an archive for it." -msgstr "软件包 %s 需要重新安装，但是我无法找到相应的安装文件。" - -#: apt-pkg/algorithms.cc:1086 -msgid "" -"Error, pkgProblemResolver::Resolve generated breaks, this may be caused by " -"held packages." -msgstr "" -"错误，pkgProblemResolver::Resolve 发生故障，这可能是有软件包被要求保持现状的" -"缘故。" - -#: apt-pkg/algorithms.cc:1088 -msgid "Unable to correct problems, you have held broken packages." -msgstr "" -"无法修正错误，因为您要求某些软件包保持现状，就是它们破坏了软件包间的依赖关" -"系。" - -#: apt-pkg/depcache.cc:138 apt-pkg/depcache.cc:167 -msgid "Building dependency tree" -msgstr "正在分析软件包的依赖关系树" - -#: apt-pkg/depcache.cc:139 -msgid "Candidate versions" -msgstr "候选版本" - -#: apt-pkg/depcache.cc:168 -msgid "Dependency generation" -msgstr "生成依赖关系" - -#: apt-pkg/depcache.cc:188 apt-pkg/depcache.cc:221 apt-pkg/depcache.cc:225 -msgid "Reading state information" -msgstr "正在读取状态信息" - -#: apt-pkg/depcache.cc:250 #, c-format -msgid "Failed to open StateFile %s" -msgstr "无法打开状态文件 %s" - -#: apt-pkg/depcache.cc:256 -#, c-format -msgid "Failed to write temporary StateFile %s" -msgstr "无法写入临时状态文件 %s" +msgid "Unable to stat %s." +msgstr "无法读取 %s 的状态。" -#: apt-pkg/tagfile.cc:140 #, c-format -msgid "Unable to parse package file %s (1)" -msgstr "无法解析软件包文件 %s (1)" +msgid "Unable to stat the mount point %s" +msgstr "无法读取文件系统挂载点 %s 的状态" -#: apt-pkg/tagfile.cc:237 -#, c-format -msgid "Unable to parse package file %s (2)" -msgstr "无法解析软件包文件 %s (2)" +msgid "Failed to stat the cdrom" +msgstr "无法读取盘片的状态" -#: apt-pkg/cacheset.cc:489 #, c-format -msgid "Release '%s' for '%s' was not found" -msgstr "未找到“%2$s”的“%1$s”发布版本" +msgid "Command line option '%c' [from %s] is not known." +msgstr "未知的命令行选项“%c” [来自 %s]" -#: apt-pkg/cacheset.cc:492 #, c-format -msgid "Version '%s' for '%s' was not found" -msgstr "未找到“%2$s”的“%1$s”版本" +msgid "Command line option %s is not understood" +msgstr "无法识别命令行选项 %s" -#: apt-pkg/cacheset.cc:603 #, c-format -msgid "Couldn't find task '%s'" -msgstr "无法找到任务 %s" +msgid "Command line option %s is not boolean" +msgstr "命令行选项 %s 不是布尔值" -#: apt-pkg/cacheset.cc:609 #, c-format -msgid "Couldn't find any package by regex '%s'" -msgstr "无法按照正则表达式 %s 找到任何软件包" +msgid "Option %s requires an argument." +msgstr "选项 %s 要求有一个参数" -#: apt-pkg/cacheset.cc:615 #, c-format -msgid "Couldn't find any package by glob '%s'" -msgstr "无法按照 glob ‘%s’ 找到任何软件包" +msgid "Option %s: Configuration item specification must have an =<val>." +msgstr "选项 %s：配置项后必须包含有形如“=<变量>”的具体指定" -#: apt-pkg/cacheset.cc:626 #, c-format -msgid "Can't select versions from package '%s' as it is purely virtual" -msgstr "无法从完全虚拟的软件包 %s 中选择版本" +msgid "Option %s requires an integer argument, not '%s'" +msgstr "选项 %s 要求有一个整数作为参数，而不是“%s”" -#: apt-pkg/cacheset.cc:633 apt-pkg/cacheset.cc:640 #, c-format -msgid "" -"Can't select installed nor candidate version from package '%s' as it has " -"neither of them" -msgstr "因为软件包 %s 没有已安装或候选的版本，无法进行选择" +msgid "Option '%s' is too long" +msgstr "选项“%s”太长" -#: apt-pkg/cacheset.cc:647 #, c-format -msgid "Can't select newest version from package '%s' as it is purely virtual" -msgstr "因为软件包 %s 是完全的虚拟软件包，无法选择它的最新版" +msgid "Sense %s is not understood, try true or false." +msgstr "不能识别参数 %s，请用 true 或 false" -#: apt-pkg/cacheset.cc:655 #, c-format -msgid "Can't select candidate version from package %s as it has no candidate" -msgstr "因为软件包 %s 没有候选版本，无法进行选择" +msgid "Invalid operation %s" +msgstr "无效的操作 %s" -#: apt-pkg/cacheset.cc:663 #, c-format -msgid "Can't select installed version from package %s as it is not installed" -msgstr "因为软件包 %s 没有安装，无法选择它的已安装版本" +msgid "Unrecognized type abbreviation: '%c'" +msgstr "无法识别的类型缩写：“%c”" -#: apt-pkg/indexrecords.cc:78 #, c-format -msgid "Unable to parse Release file %s" -msgstr "无法解析软件包仓库 Release 文件 %s" +msgid "Opening configuration file %s" +msgstr "正在打开配置文件 %s" -#: apt-pkg/indexrecords.cc:86 #, c-format -msgid "No sections in Release file %s" -msgstr "软件包仓库 Release 文件 %s 内无组件章节信息" +msgid "Syntax error %s:%u: Block starts with no name." +msgstr "语法错误 %s:%u：配置小节没有以名字开头" -#: apt-pkg/indexrecords.cc:117 #, c-format -msgid "No Hash entry in Release file %s" -msgstr "软件包仓库 Release 文件 %s 内无哈希条目" +msgid "Syntax error %s:%u: Malformed tag" +msgstr "语法错误 %s:%u：标签格式有误" -#: apt-pkg/indexrecords.cc:130 #, c-format -msgid "Invalid 'Valid-Until' entry in Release file %s" -msgstr "软件包仓库 Release 文件 %s 内 Valid-Until 条目无效" +msgid "Syntax error %s:%u: Extra junk after value" +msgstr "语法错误 %s:%u：配置值后有多余的无意义数据" -#: apt-pkg/indexrecords.cc:149 #, c-format -msgid "Invalid 'Date' entry in Release file %s" -msgstr "软件包仓库 Release 文件 %s 内 Date 条目无效" +msgid "Syntax error %s:%u: Directives can only be done at the top level" +msgstr "语法错误 %s:%u：只能在顶层配置文件中使用指示" -#. d means days, h means hours, min means minutes, s means seconds -#: apt-pkg/contrib/strutl.cc:418 #, c-format -msgid "%lid %lih %limin %lis" -msgstr "%li天 %li小时 %li分 %li秒" +msgid "Syntax error %s:%u: Too many nested includes" +msgstr "语法错误 %s:%u：太多的嵌套 include 命令" -#. h means hours, min means minutes, s means seconds -#: apt-pkg/contrib/strutl.cc:425 #, c-format -msgid "%lih %limin %lis" -msgstr "%li小时 %li分 %li秒" +msgid "Syntax error %s:%u: Included from here" +msgstr "语法错误 %s:%u：Included from here" -#. min means minutes, s means seconds -#: apt-pkg/contrib/strutl.cc:432 #, c-format -msgid "%limin %lis" -msgstr "%li分 %li秒" +msgid "Syntax error %s:%u: Unsupported directive '%s'" +msgstr "语法错误 %s:%u：不支持的指令“%s”" -#. s means seconds -#: apt-pkg/contrib/strutl.cc:437 #, c-format -msgid "%lis" -msgstr "%li秒" +msgid "Syntax error %s:%u: clear directive requires an option tree as argument" +msgstr "语法错误 %s:%u：clean 指令需要一个选项树作为参数" -#: apt-pkg/contrib/strutl.cc:1258 #, c-format -msgid "Selection %s not found" -msgstr "找不到您选则的 %s" +msgid "Syntax error %s:%u: Extra junk at end of file" +msgstr "语法错误 %s:%u：文件尾部有多余的无意义的数据" -#: apt-pkg/contrib/fileutl.cc:190 #, c-format msgid "Not using locking for read only lock file %s" msgstr "由于文件系统为只读，因而无法使用文件锁 %s" -#: apt-pkg/contrib/fileutl.cc:195 #, c-format msgid "Could not open lock file %s" msgstr "无法打开锁文件 %s" -#: apt-pkg/contrib/fileutl.cc:218 #, c-format msgid "Not using locking for nfs mounted lock file %s" msgstr "无法在 nfs 文件系统上使用文件锁 %s" -#: apt-pkg/contrib/fileutl.cc:223 #, c-format msgid "Could not get lock %s" msgstr "无法获得锁 %s" -#: apt-pkg/contrib/fileutl.cc:360 apt-pkg/contrib/fileutl.cc:474 #, c-format msgid "List of files can't be created as '%s' is not a directory" msgstr "无法创建文件列表，因为‘%s’不是一个目录" -#: apt-pkg/contrib/fileutl.cc:394 #, c-format msgid "Ignoring '%s' in directory '%s' as it is not a regular file" msgstr "忽略‘%s’(于目录‘%s’)，鉴于它不是一个常规文件" -#: apt-pkg/contrib/fileutl.cc:412 #, c-format msgid "Ignoring file '%s' in directory '%s' as it has no filename extension" msgstr "忽略‘%s’(于目录‘%s’)，鉴于它没有文件扩展名" -#: apt-pkg/contrib/fileutl.cc:421 #, c-format msgid "" "Ignoring file '%s' in directory '%s' as it has an invalid filename extension" msgstr "忽略‘%s’(于目录‘%s’)，鉴于它的文件扩展名无效" -#: apt-pkg/contrib/fileutl.cc:824 #, c-format msgid "Sub-process %s received a segmentation fault." msgstr "子进程 %s 发生了段错误" -#: apt-pkg/contrib/fileutl.cc:826 #, c-format msgid "Sub-process %s received signal %u." msgstr "子进程 %s 收到信号 %u。" -#: apt-pkg/contrib/fileutl.cc:830 apt-pkg/contrib/gpgv.cc:239 #, c-format msgid "Sub-process %s returned an error code (%u)" msgstr "子进程 %s 返回了一个错误号 (%u)" -#: apt-pkg/contrib/fileutl.cc:832 apt-pkg/contrib/gpgv.cc:232 #, c-format msgid "Sub-process %s exited unexpectedly" msgstr "子进程 %s 异常退出" -#: apt-pkg/contrib/fileutl.cc:913 #, c-format msgid "Problem closing the gzip file %s" msgstr "关闭 gzip %s 文件出错" -#: apt-pkg/contrib/fileutl.cc:1101 #, c-format msgid "Could not open file %s" msgstr "无法打开文件 %s" -#: apt-pkg/contrib/fileutl.cc:1160 apt-pkg/contrib/fileutl.cc:1207 #, c-format msgid "Could not open file descriptor %d" msgstr "无法打开文件描述符 %d" -#: apt-pkg/contrib/fileutl.cc:1315 msgid "Failed to create subprocess IPC" msgstr "无法创建子进程的 IPC 管道" -#: apt-pkg/contrib/fileutl.cc:1373 msgid "Failed to exec compressor " msgstr "无法执行压缩程序" -#: apt-pkg/contrib/fileutl.cc:1514 #, c-format msgid "read, still have %llu to read but none left" msgstr "还剩 %llu 字节没有读出，但已没有可读信息" -#: apt-pkg/contrib/fileutl.cc:1627 apt-pkg/contrib/fileutl.cc:1649 #, c-format msgid "write, still have %llu to write but couldn't" msgstr "还剩 %llu 字节没有写入，但无法写入操作" -#: apt-pkg/contrib/fileutl.cc:1915 #, c-format msgid "Problem closing the file %s" msgstr "关闭文件 %s 出错" -#: apt-pkg/contrib/fileutl.cc:1927 #, c-format msgid "Problem renaming the file %s to %s" msgstr "重命名文件 %s 为 %s 出错" -#: apt-pkg/contrib/fileutl.cc:1938 #, c-format msgid "Problem unlinking the file %s" msgstr "用 unlink 删除文件 %s 出错" -#: apt-pkg/contrib/fileutl.cc:1951 msgid "Problem syncing the file" msgstr "同步文件出错" -#: apt-pkg/contrib/progress.cc:148 -#, c-format -msgid "%c%s... Error!" -msgstr "%c%s... 有错误！" - -#: apt-pkg/contrib/progress.cc:150 -#, c-format -msgid "%c%s... Done" -msgstr "%c%s... 完成" - -#: apt-pkg/contrib/progress.cc:181 -msgid "..." -msgstr "..." - -#. Print the spinner -#: apt-pkg/contrib/progress.cc:197 +#. TRANSLATOR: %s is the trusted keyring parts directory #, c-format -msgid "%c%s... %u%%" -msgstr "%c%s... %u%%" +msgid "No keyring installed in %s." +msgstr "%s 中没有安装密钥环。" -#: apt-pkg/contrib/mmap.cc:79 msgid "Can't mmap an empty file" msgstr "无法 mmap 一个空文件" -#: apt-pkg/contrib/mmap.cc:111 #, c-format msgid "Couldn't duplicate file descriptor %i" msgstr "无法为复制文件描述符 %i" -#: apt-pkg/contrib/mmap.cc:119 #, c-format msgid "Couldn't make mmap of %llu bytes" msgstr "无法 mmap %llu 字节的数据" -#: apt-pkg/contrib/mmap.cc:146 msgid "Unable to close mmap" msgstr "无法关闭 mmap" -#: apt-pkg/contrib/mmap.cc:174 apt-pkg/contrib/mmap.cc:202 msgid "Unable to synchronize mmap" msgstr "无法同步 mmap " -#: apt-pkg/contrib/mmap.cc:290 #, c-format msgid "Couldn't make mmap of %lu bytes" msgstr "无法 mmap %lu 字节的数据" -#: apt-pkg/contrib/mmap.cc:322 msgid "Failed to truncate file" msgstr "无法截断文件" -#: apt-pkg/contrib/mmap.cc:341 #, c-format msgid "" "Dynamic MMap ran out of room. Please increase the size of APT::Cache-Start. " @@ -2894,682 +2412,497 @@ msgstr "" "动态 MMap 没有空间了。请增大 APT::Cache-Start 的大小。当前值：%lu。(man 5 " "apt.conf)" -#: apt-pkg/contrib/mmap.cc:446 #, c-format msgid "" "Unable to increase the size of the MMap as the limit of %lu bytes is already " "reached." msgstr "无法增加 MMap 的大小，因为已经达到 %lu 字节的限制。" -#: apt-pkg/contrib/mmap.cc:449 msgid "" "Unable to increase size of the MMap as automatic growing is disabled by user." msgstr "无法增加 MMap 大小，因为用户已禁用自动增加。" -#: apt-pkg/contrib/cdromutl.cc:65 -#, c-format -msgid "Unable to stat the mount point %s" -msgstr "无法读取文件系统挂载点 %s 的状态" - -#: apt-pkg/contrib/cdromutl.cc:246 -msgid "Failed to stat the cdrom" -msgstr "无法读取盘片的状态" - -#: apt-pkg/contrib/configuration.cc:519 -#, c-format -msgid "Unrecognized type abbreviation: '%c'" -msgstr "无法识别的类型缩写：“%c”" - -#: apt-pkg/contrib/configuration.cc:633 -#, c-format -msgid "Opening configuration file %s" -msgstr "正在打开配置文件 %s" - -#: apt-pkg/contrib/configuration.cc:801 -#, c-format -msgid "Syntax error %s:%u: Block starts with no name." -msgstr "语法错误 %s:%u：配置小节没有以名字开头" - -#: apt-pkg/contrib/configuration.cc:820 -#, c-format -msgid "Syntax error %s:%u: Malformed tag" -msgstr "语法错误 %s:%u：标签格式有误" - -#: apt-pkg/contrib/configuration.cc:837 -#, c-format -msgid "Syntax error %s:%u: Extra junk after value" -msgstr "语法错误 %s:%u：配置值后有多余的无意义数据" - -#: apt-pkg/contrib/configuration.cc:877 -#, c-format -msgid "Syntax error %s:%u: Directives can only be done at the top level" -msgstr "语法错误 %s:%u：只能在顶层配置文件中使用指示" - -#: apt-pkg/contrib/configuration.cc:884 -#, c-format -msgid "Syntax error %s:%u: Too many nested includes" -msgstr "语法错误 %s:%u：太多的嵌套 include 命令" - -#: apt-pkg/contrib/configuration.cc:888 apt-pkg/contrib/configuration.cc:893 -#, c-format -msgid "Syntax error %s:%u: Included from here" -msgstr "语法错误 %s:%u：Included from here" - -#: apt-pkg/contrib/configuration.cc:897 #, c-format -msgid "Syntax error %s:%u: Unsupported directive '%s'" -msgstr "语法错误 %s:%u：不支持的指令“%s”" +msgid "%c%s... Error!" +msgstr "%c%s... 有错误！" -#: apt-pkg/contrib/configuration.cc:900 #, c-format -msgid "Syntax error %s:%u: clear directive requires an option tree as argument" -msgstr "语法错误 %s:%u：clean 指令需要一个选项树作为参数" +msgid "%c%s... Done" +msgstr "%c%s... 完成" -#: apt-pkg/contrib/configuration.cc:950 -#, c-format -msgid "Syntax error %s:%u: Extra junk at end of file" -msgstr "语法错误 %s:%u：文件尾部有多余的无意义的数据" +msgid "..." +msgstr "..." -#. TRANSLATOR: %s is the trusted keyring parts directory -#: apt-pkg/contrib/gpgv.cc:72 +#. Print the spinner #, c-format -msgid "No keyring installed in %s." -msgstr "%s 中没有安装密钥环。" +msgid "%c%s... %u%%" +msgstr "%c%s... %u%%" -#: apt-pkg/contrib/cmndline.cc:124 +#. d means days, h means hours, min means minutes, s means seconds #, c-format -msgid "Command line option '%c' [from %s] is not known." -msgstr "未知的命令行选项“%c” [来自 %s]" +msgid "%lid %lih %limin %lis" +msgstr "%li天 %li小时 %li分 %li秒" -#: apt-pkg/contrib/cmndline.cc:149 apt-pkg/contrib/cmndline.cc:158 -#: apt-pkg/contrib/cmndline.cc:166 +#. h means hours, min means minutes, s means seconds #, c-format -msgid "Command line option %s is not understood" -msgstr "无法识别命令行选项 %s" +msgid "%lih %limin %lis" +msgstr "%li小时 %li分 %li秒" -#: apt-pkg/contrib/cmndline.cc:171 +#. min means minutes, s means seconds #, c-format -msgid "Command line option %s is not boolean" -msgstr "命令行选项 %s 不是布尔值" +msgid "%limin %lis" +msgstr "%li分 %li秒" -#: apt-pkg/contrib/cmndline.cc:212 apt-pkg/contrib/cmndline.cc:233 +#. s means seconds #, c-format -msgid "Option %s requires an argument." -msgstr "选项 %s 要求有一个参数" +msgid "%lis" +msgstr "%li秒" -#: apt-pkg/contrib/cmndline.cc:246 apt-pkg/contrib/cmndline.cc:252 #, c-format -msgid "Option %s: Configuration item specification must have an =<val>." -msgstr "选项 %s：配置项后必须包含有形如“=<变量>”的具体指定" +msgid "Selection %s not found" +msgstr "找不到您选则的 %s" -#: apt-pkg/contrib/cmndline.cc:281 #, c-format -msgid "Option %s requires an integer argument, not '%s'" -msgstr "选项 %s 要求有一个整数作为参数，而不是“%s”" +msgid "" +"Unable to lock the administration directory (%s), is another process using " +"it?" +msgstr "无法锁定管理目录(%s)，是否有其他进程正占用它？" -#: apt-pkg/contrib/cmndline.cc:312 #, c-format -msgid "Option '%s' is too long" -msgstr "选项“%s”太长" +msgid "Unable to lock the administration directory (%s), are you root?" +msgstr "无法对状态列表目录加锁(%s)，请查看您是否正以 root 用户运行？" -#: apt-pkg/contrib/cmndline.cc:344 +#. TRANSLATORS: the %s contains the recovery command, usually +#. dpkg --configure -a #, c-format -msgid "Sense %s is not understood, try true or false." -msgstr "不能识别参数 %s，请用 true 或 false" +msgid "" +"dpkg was interrupted, you must manually run '%s' to correct the problem. " +msgstr "dpkg 被中断，您必须手工运行 ‘%s’ 解决此问题。" -#: apt-pkg/contrib/cmndline.cc:394 -#, c-format -msgid "Invalid operation %s" -msgstr "无效的操作 %s" +msgid "Not locked" +msgstr "未锁定" -#: apt-pkg/deb/dpkgpm.cc:112 #, c-format msgid "Installing %s" msgstr "正在安装 %s" -#: apt-pkg/deb/dpkgpm.cc:113 apt-pkg/deb/dpkgpm.cc:1016 #, c-format msgid "Configuring %s" msgstr "正在配置 %s" -#: apt-pkg/deb/dpkgpm.cc:114 apt-pkg/deb/dpkgpm.cc:1023 #, c-format msgid "Removing %s" msgstr "正在删除 %s" -#: apt-pkg/deb/dpkgpm.cc:115 #, c-format msgid "Completely removing %s" msgstr "完全删除 %s" -#: apt-pkg/deb/dpkgpm.cc:116 #, c-format msgid "Noting disappearance of %s" msgstr "注意到 %s 已经消失" -#: apt-pkg/deb/dpkgpm.cc:117 #, c-format msgid "Running post-installation trigger %s" msgstr "执行安装后执行的触发器 %s" #. FIXME: use a better string after freeze -#: apt-pkg/deb/dpkgpm.cc:847 #, c-format msgid "Directory '%s' missing" msgstr "目录 %s 缺失" -#: apt-pkg/deb/dpkgpm.cc:862 apt-pkg/deb/dpkgpm.cc:884 #, c-format msgid "Could not open file '%s'" msgstr "无法打开文件 %s" -#: apt-pkg/deb/dpkgpm.cc:1009 #, c-format msgid "Preparing %s" msgstr "正在准备 %s" -#: apt-pkg/deb/dpkgpm.cc:1010 #, c-format msgid "Unpacking %s" msgstr "正在解压缩 %s" -#: apt-pkg/deb/dpkgpm.cc:1015 #, c-format msgid "Preparing to configure %s" msgstr "正在准备配置 %s" -#: apt-pkg/deb/dpkgpm.cc:1017 #, c-format msgid "Installed %s" msgstr "已安装 %s" -#: apt-pkg/deb/dpkgpm.cc:1022 #, c-format msgid "Preparing for removal of %s" msgstr "正在准备 %s 的删除操作" -#: apt-pkg/deb/dpkgpm.cc:1024 #, c-format msgid "Removed %s" msgstr "已删除 %s" -#: apt-pkg/deb/dpkgpm.cc:1029 #, c-format msgid "Preparing to completely remove %s" msgstr "正在准备完全删除 %s" -#: apt-pkg/deb/dpkgpm.cc:1030 #, c-format msgid "Completely removed %s" msgstr "完全删除了 %s" -#: apt-pkg/deb/dpkgpm.cc:1091 apt-pkg/deb/dpkgpm.cc:1179 #, c-format msgid "Can not write log (%s)" msgstr "无法写入日志 (%s)" -#: apt-pkg/deb/dpkgpm.cc:1091 apt-pkg/deb/dpkgpm.cc:1179 msgid "Is /dev/pts mounted?" msgstr "/dev/pts 挂载了吗？" -#: apt-pkg/deb/dpkgpm.cc:1670 msgid "Operation was interrupted before it could finish" msgstr "操作在完成之前被打断" -#: apt-pkg/deb/dpkgpm.cc:1732 msgid "No apport report written because MaxReports is reached already" msgstr "由于已经达到 MaxReports 限制，没有写入 apport 报告。" #. check if its not a follow up error -#: apt-pkg/deb/dpkgpm.cc:1737 msgid "dependency problems - leaving unconfigured" msgstr "依赖问题 - 保持未配置" -#: apt-pkg/deb/dpkgpm.cc:1739 msgid "" "No apport report written because the error message indicates its a followup " "error from a previous failure." msgstr "因为错误消息指示这是由于上一个问题导致的错误，没有写入 apport 报告。" -#: apt-pkg/deb/dpkgpm.cc:1745 msgid "" "No apport report written because the error message indicates a disk full " "error" msgstr "因为错误消息指示这是由于磁盘已满，没有写入 apport 报告。" -#: apt-pkg/deb/dpkgpm.cc:1752 msgid "" "No apport report written because the error message indicates a out of memory " "error" msgstr "因为错误消息指示这是由于内存不足，没有写入 apport 报告。" -#: apt-pkg/deb/dpkgpm.cc:1759 apt-pkg/deb/dpkgpm.cc:1765 msgid "" "No apport report written because the error message indicates an issue on the " "local system" msgstr "错误信息显示本地系统有一些问题，因此没有写入 apport 报告" -#: apt-pkg/deb/dpkgpm.cc:1787 msgid "" "No apport report written because the error message indicates a dpkg I/O error" msgstr "因为错误消息指示这是一个 dpkg I/O 错误，没有写入 apport 报告。" -#: apt-pkg/deb/debsystem.cc:91 -#, c-format -msgid "" -"Unable to lock the administration directory (%s), is another process using " -"it?" -msgstr "无法锁定管理目录(%s)，是否有其他进程正占用它？" +msgid "Building dependency tree" +msgstr "正在分析软件包的依赖关系树" + +msgid "Candidate versions" +msgstr "候选版本" + +msgid "Dependency generation" +msgstr "生成依赖关系" + +msgid "Reading state information" +msgstr "正在读取状态信息" -#: apt-pkg/deb/debsystem.cc:94 #, c-format -msgid "Unable to lock the administration directory (%s), are you root?" -msgstr "无法对状态列表目录加锁(%s)，请查看您是否正以 root 用户运行？" +msgid "Failed to open StateFile %s" +msgstr "无法打开状态文件 %s" -#. TRANSLATORS: the %s contains the recovery command, usually -#. dpkg --configure -a -#: apt-pkg/deb/debsystem.cc:110 #, c-format -msgid "" -"dpkg was interrupted, you must manually run '%s' to correct the problem. " -msgstr "dpkg 被中断，您必须手工运行 ‘%s’ 解决此问题。" +msgid "Failed to write temporary StateFile %s" +msgstr "无法写入临时状态文件 %s" -#: apt-pkg/deb/debsystem.cc:128 -msgid "Not locked" -msgstr "未锁定" +msgid "Send scenario to solver" +msgstr "向solver发送情景" -#: cmdline/apt-extracttemplates.cc:224 -msgid "" -"Usage: apt-extracttemplates file1 [file2 ...]\n" -"\n" -"apt-extracttemplates is a tool to extract config and template info\n" -"from debian packages\n" -"\n" -"Options:\n" -" -h This help text\n" -" -t Set the temp dir\n" -" -c=? Read this configuration file\n" -" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n" -msgstr "" -"用法： apt-extracttemplates 文件甲 [文件乙 ...]\n" -"\n" -"apt-extracttemplates 是用来从 debian 软件包中解压出配置文件和模板\n" -"信息的工具\n" -"\n" -"选项：\n" -" -h 本帮助文本\n" -" -t 设置 temp 目录\n" -" -c=? 读指定的配置文件\n" -" -o=? 设置任意指定的配置选项，例如 -o dir::cache=/tmp\n" +msgid "Send request to solver" +msgstr "向solver发送请求" + +msgid "Prepare for receiving solution" +msgstr "准备接收解决方案" + +msgid "External solver failed without a proper error message" +msgstr "外部solver出错，错误信息不恰当" + +msgid "Execute external solver" +msgstr "执行外部solver" -#: cmdline/apt-extracttemplates.cc:254 #, c-format -msgid "Unable to mkstemp %s" -msgstr "无法建立临时文件(mkstemp) %s " +msgid "Wrote %i records.\n" +msgstr "已写入 %i 条记录。\n" -#: cmdline/apt-extracttemplates.cc:300 -msgid "Cannot get debconf version. Is debconf installed?" -msgstr "无法获得 debconf 的版本。您安装了 debconf 吗？" +#, c-format +msgid "Wrote %i records with %i missing files.\n" +msgstr "已写入 %i 条记录，并有 %i 个文件缺失。\n" -#: ftparchive/apt-ftparchive.cc:187 ftparchive/apt-ftparchive.cc:371 -msgid "Package extension list is too long" -msgstr "软件包的扩展列表太长" +#, c-format +msgid "Wrote %i records with %i mismatched files\n" +msgstr "已写入 %i 条记录，并有 %i 个文件不匹配\n" -#: ftparchive/apt-ftparchive.cc:189 ftparchive/apt-ftparchive.cc:206 -#: ftparchive/apt-ftparchive.cc:229 ftparchive/apt-ftparchive.cc:283 -#: ftparchive/apt-ftparchive.cc:297 ftparchive/apt-ftparchive.cc:319 #, c-format -msgid "Error processing directory %s" -msgstr "处理目录 %s 时出错" +msgid "Wrote %i records with %i missing files and %i mismatched files\n" +msgstr "已写入 %i 条记录，并有 %i 个缺失，以及 %i 个文件不匹配\n" -#: ftparchive/apt-ftparchive.cc:281 -msgid "Source extension list is too long" -msgstr "源扩展列表太长" +#, c-format +msgid "Can't find authentication record for: %s" +msgstr "无法找到认证记录：%s" -#: ftparchive/apt-ftparchive.cc:401 -msgid "Error writing header to contents file" -msgstr "将头写入到目录文件时出错" +#, c-format +msgid "Hash mismatch for: %s" +msgstr "Hash 校验和不符：%s" -#: ftparchive/apt-ftparchive.cc:431 #, c-format -msgid "Error processing contents %s" -msgstr "处理目录 %s 时出错" +msgid "Unable to parse Release file %s" +msgstr "无法解析软件包仓库 Release 文件 %s" -#: ftparchive/apt-ftparchive.cc:626 -msgid "" -"Usage: apt-ftparchive [options] command\n" -"Commands: packages binarypath [overridefile [pathprefix]]\n" -" sources srcpath [overridefile [pathprefix]]\n" -" contents path\n" -" release path\n" -" generate config [groups]\n" -" clean config\n" -"\n" -"apt-ftparchive generates index files for Debian archives. It supports\n" -"many styles of generation from fully automated to functional replacements\n" -"for dpkg-scanpackages and dpkg-scansources\n" -"\n" -"apt-ftparchive generates Package files from a tree of .debs. The\n" -"Package file contains the contents of all the control fields from\n" -"each package as well as the MD5 hash and filesize. An override file\n" -"is supported to force the value of Priority and Section.\n" -"\n" -"Similarly apt-ftparchive generates Sources files from a tree of .dscs.\n" -"The --source-override option can be used to specify a src override file\n" -"\n" -"The 'packages' and 'sources' command should be run in the root of the\n" -"tree. BinaryPath should point to the base of the recursive search and \n" -"override file should contain the override flags. Pathprefix is\n" -"appended to the filename fields if present. Example usage from the \n" -"Debian archive:\n" -" apt-ftparchive packages dists/potato/main/binary-i386/ > \\\n" -" dists/potato/main/binary-i386/Packages\n" -"\n" -"Options:\n" -" -h This help text\n" -" --md5 Control MD5 generation\n" -" -s=? Source override file\n" -" -q Quiet\n" -" -d=? Select the optional caching database\n" -" --no-delink Enable delinking debug mode\n" -" --contents Control contents file generation\n" -" -c=? Read this configuration file\n" -" -o=? Set an arbitrary configuration option" -msgstr "" -"用法： apt-ftparchive [选项] 命令\n" -"命令： packages 二进制软件包搜索路径 [overridefile [路径前缀]]\n" -" sources 源代码包搜索路径 [overridefile [路径前缀]]\n" -" contents 搜索路径\n" -" release 搜索路径\n" -" generate 配置文件 [groups]\n" -" clean 配置文件\n" -"\n" -"apt-ftparchive 被用来为 Debian 软件包生成索引文件。它能支持\n" -"多种生成索引的方式，从全自动的索引生成到在功能上取代 dpkg-scanpackages \n" -"和 dpkg-scansources，都能游刃有余\n" -"\n" -"apt-ftparchive 能依据一个由 .deb 文件构成的文件树生成 Package 文件。\n" -"Package 文件里不仅注有每个软件包的 MD5 校验码和文件大小，\n" -"还有软件包的所有控制字段的内容。该软件同时支持 override 文件，\n" -"通过它可以强制指定软件包的优先级及其所属的软件类别。\n" -"\n" -"与上面类似，apt-ftparchive 也能由 .dsc 的文件树生成 Source 文件。\n" -"可以通过使用 --source-override 选项来指定一个 override 文件\n" -"\n" -"使用“packages”和“source”命令时，必须在文件树的根部执行本程序。\n" -"二进制包的搜索路径一定要是递归搜索的底层，而且 override 文件里\n" -"应该注明 override 的标志。若指定了路径前缀，那么它会被加到文件名前面。\n" -"下面有个来自 Debian 文档的例子：\n" -" apt-ftparchive packages dists/potato/main/binary-i386 > \\\n" -" dists/potato/main/binary-i386/Packages\n" -"\n" -"选项:\n" -" -h 本帮助文档\n" -" --md5 使之生成 MD5 校验和\n" -" -s=? 源代码包 override 文件\n" -" -q 输出精简信息\n" -" -d=? 指定可选的缓存数据库\n" -" -d=? 使用另一个可选的缓存数据库\n" -" --no-delink 开启delink的调试模式\n" -" --contents 使之生成控制内容文件\n" -" -c=? 读取指定配置文件\n" -" -o=? 设置任意指定的配置选项" +#, c-format +msgid "No sections in Release file %s" +msgstr "软件包仓库 Release 文件 %s 内无组件章节信息" -#: ftparchive/apt-ftparchive.cc:822 -msgid "No selections matched" -msgstr "没有任何选定项是匹配的" +#, c-format +msgid "No Hash entry in Release file %s" +msgstr "软件包仓库 Release 文件 %s 内无哈希条目" -#: ftparchive/apt-ftparchive.cc:907 #, c-format -msgid "Some files are missing in the package file group `%s'" -msgstr "软件包文件组“%s”中缺少一些文件" +msgid "Invalid 'Valid-Until' entry in Release file %s" +msgstr "软件包仓库 Release 文件 %s 内 Valid-Until 条目无效" -#: ftparchive/cachedb.cc:65 #, c-format -msgid "DB was corrupted, file renamed to %s.old" -msgstr "数据库被损坏，该数据库文件的文件名已改成 %s.old" +msgid "Invalid 'Date' entry in Release file %s" +msgstr "软件包仓库 Release 文件 %s 内 Date 条目无效" -#: ftparchive/cachedb.cc:83 #, c-format -msgid "DB is old, attempting to upgrade %s" -msgstr "数据库已过期，现尝试进行升级 %s" +msgid "Packaging system '%s' is not supported" +msgstr "不支持“%s”打包系统" -#: ftparchive/cachedb.cc:94 +msgid "Unable to determine a suitable packaging system type" +msgstr "无法确定适合的打包系统类型" + +#, c-format +msgid "Progress: [%3i%%]" +msgstr "进度：[%3i%%]" + +msgid "Running dpkg" +msgstr "正在运行 dpkg" + +#, c-format msgid "" -"DB format is invalid. If you upgraded from an older version of apt, please " -"remove and re-create the database." +"Could not perform immediate configuration on '%s'. Please see man 5 apt.conf " +"under APT::Immediate-Configure for details. (%d)" msgstr "" -"数据库格式无效。如果您是从一个老版本的 apt 升级而来，请删除数据库并重建它。" +"无法立即对 %s 进行配置。请查看 man 5 apt.conf 中的 APT::Immediate-Configure " +"(%d)" -#: ftparchive/cachedb.cc:99 #, c-format -msgid "Unable to open DB file %s: %s" -msgstr "无法打开数据库文件 %s：%s" +msgid "Could not configure '%s'. " +msgstr "无法配置 %s。" -#: ftparchive/cachedb.cc:332 -msgid "Failed to read .dsc" -msgstr "读取 .dsc 文件失败" +#, c-format +msgid "" +"This installation run will require temporarily removing the essential " +"package %s due to a Conflicts/Pre-Depends loop. This is often bad, but if " +"you really want to do it, activate the APT::Force-LoopBreak option." +msgstr "" +"由于这次安装存在着一个 Conflicts/Pre-Depends 循环，因而需要暂时删除一个必不可" +"少的软件包 %s。通常并不建议这样做，但是如果您确实希望如此，可以打开 APT::" +"Force-LoopBreak 选项。" -#: ftparchive/cachedb.cc:365 -msgid "Archive has no control record" -msgstr "归档文件没有包含控制字段" +msgid "Empty package cache" +msgstr "软件包缓存区是空的" -#: ftparchive/cachedb.cc:594 -msgid "Unable to get a cursor" -msgstr "无法获得游标" +msgid "The package cache file is corrupted" +msgstr "软件包缓存文件损坏了" -#: ftparchive/writer.cc:91 -#, c-format -msgid "W: Unable to read directory %s\n" -msgstr "警告：无法读取目录 %s\n" +msgid "The package cache file is an incompatible version" +msgstr "软件包缓存区文件的版本不兼容" + +msgid "The package cache file is corrupted, it is too small" +msgstr "软件包缓存文件损坏，它太小了" -#: ftparchive/writer.cc:96 #, c-format -msgid "W: Unable to stat %s\n" -msgstr "警告：无法获得 %s 的状态\n" +msgid "This APT does not support the versioning system '%s'" +msgstr "本程序目前不支持“%s”版本系统" -#: ftparchive/writer.cc:152 -msgid "E: " -msgstr "错误：" +msgid "The package cache was built for a different architecture" +msgstr "软件包缓存区是为其它架构的硬件构建的" -#: ftparchive/writer.cc:154 -msgid "W: " -msgstr "警告：" +msgid "Depends" +msgstr "依赖" -#: ftparchive/writer.cc:161 -msgid "E: Errors apply to file " -msgstr "错误：处理文件时出错 " +msgid "PreDepends" +msgstr "预依赖" + +msgid "Suggests" +msgstr "建议" + +msgid "Recommends" +msgstr "推荐" + +msgid "Conflicts" +msgstr "冲突" + +msgid "Replaces" +msgstr "替换" + +msgid "Obsoletes" +msgstr "废弃" -#: ftparchive/writer.cc:179 ftparchive/writer.cc:211 +msgid "Breaks" +msgstr "破坏" + +msgid "Enhances" +msgstr "增强" + +msgid "important" +msgstr "重要" + +msgid "required" +msgstr "必需" + +msgid "standard" +msgstr "标准" + +msgid "optional" +msgstr "可选" + +msgid "extra" +msgstr "额外" + +msgid "Cache has an incompatible versioning system" +msgstr "软件包暂存区使用的是不兼容的版本控制系统" + +#. TRANSLATOR: The first placeholder is a package name, +#. the other two should be copied verbatim as they include debug info #, c-format -msgid "Failed to resolve %s" -msgstr "无法解析 %s" +msgid "Error occurred while processing %s (%s%d)" +msgstr "处理 %s (%s%d) 时出错" -#: ftparchive/writer.cc:192 -msgid "Tree walking failed" -msgstr "无法遍历目录树" +msgid "Wow, you exceeded the number of package names this APT is capable of." +msgstr "哇，软件包数量超出了本 APT 的处理能力。" + +msgid "Wow, you exceeded the number of versions this APT is capable of." +msgstr "哇，软件包版本数量超出了本 APT 的处理能力。" + +msgid "Wow, you exceeded the number of descriptions this APT is capable of." +msgstr "哇，软件包说明数量超出了本 APT 的处理能力。" + +msgid "Wow, you exceeded the number of dependencies this APT is capable of." +msgstr "哇，依赖关系数量超出了本 APT 的处理能力。" -#: ftparchive/writer.cc:219 #, c-format -msgid "Failed to open %s" -msgstr "无法打开 %s" +msgid "Package %s %s was not found while processing file dependencies" +msgstr "当处理文件依赖关系时，无法找到软件包 %s %s" -#: ftparchive/writer.cc:278 #, c-format -msgid " DeLink %s [%s]\n" -msgstr " DeLink %s [%s]\n" +msgid "Couldn't stat source package list %s" +msgstr "无法获取源软件包列表 %s 的状态" + +msgid "Reading package lists" +msgstr "正在读取软件包列表" + +msgid "Collecting File Provides" +msgstr "正在收集文件所提供的软件包" + +msgid "IO Error saving source cache" +msgstr "无法读取或写入软件源缓存" -#: ftparchive/writer.cc:286 #, c-format -msgid "Failed to readlink %s" -msgstr "无法读取符号链接 %s" +msgid "Index file type '%s' is not supported" +msgstr "不支持索引文件类型“%s”" -#: ftparchive/writer.cc:290 #, c-format -msgid "Failed to unlink %s" -msgstr "无法使用 unlink 删除 %s" +msgid "" +"The value '%s' is invalid for APT::Default-Release as such a release is not " +"available in the sources" +msgstr "" +"'%s' 这个值对 APT::Default-Release 是无效的，因为在源里找不到这样的发行" -#: ftparchive/writer.cc:298 #, c-format -msgid "*** Failed to link %s to %s" -msgstr "*** 无法将 %s 链接到 %s" +msgid "Invalid record in the preferences file %s, no Package header" +msgstr "首选项文件 %s 中发现有无效的记录，无 Package 字段头" -#: ftparchive/writer.cc:308 #, c-format -msgid " DeLink limit of %sB hit.\n" -msgstr " 达到了 DeLink 的上限 %sB。\n" +msgid "Did not understand pin type %s" +msgstr "无法识别锁定的类型 %s" -#: ftparchive/writer.cc:417 -msgid "Archive had no package field" -msgstr "归档文件没有包含 package 字段" +msgid "No priority (or zero) specified for pin" +msgstr "没有为版本锁定指定优先级(或为零)" -#: ftparchive/writer.cc:425 ftparchive/writer.cc:684 #, c-format -msgid " %s has no override entry\n" -msgstr " %s 中没有 override 项\n" +msgid "Malformed stanza %u in source list %s (URI parse)" +msgstr "安装源配置文件“%2$s”第 %1$u 节有错误(URI 解析)" -#: ftparchive/writer.cc:493 ftparchive/writer.cc:840 #, c-format -msgid " %s maintainer is %s not %s\n" -msgstr " %s 的维护者 %s 并非 %s\n" +msgid "Malformed line %lu in source list %s ([option] unparseable)" +msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误([选项] 无法解析)" -#: ftparchive/writer.cc:698 #, c-format -msgid " %s has no source override entry\n" -msgstr " %s 没有源代码的 override 项\n" +msgid "Malformed line %lu in source list %s ([option] too short)" +msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误([选项] 太短)" -#: ftparchive/writer.cc:702 #, c-format -msgid " %s has no binary override entry either\n" -msgstr " %s 中没有二进制文件的 override 项\n" - -#: ftparchive/contents.cc:351 ftparchive/contents.cc:382 -msgid "realloc - Failed to allocate memory" -msgstr "realloc - 分配内存失败" +msgid "Malformed line %lu in source list %s ([%s] is not an assignment)" +msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误([%3$s] 不是一个任务)" -#: ftparchive/override.cc:38 ftparchive/override.cc:142 #, c-format -msgid "Unable to open %s" -msgstr "无法打开 %s" +msgid "Malformed line %lu in source list %s ([%s] has no key)" +msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误([%3$s] 没有键)" -#. skip spaces -#. find end of word -#: ftparchive/override.cc:68 #, c-format -msgid "Malformed override %s line %llu (%s)" -msgstr "override 文件 %s 第 %llu (%s) 行的格式有误" +msgid "Malformed line %lu in source list %s ([%s] key %s has no value)" +msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误([%3$s] 键 %4$s 没有值)" -#: ftparchive/override.cc:127 ftparchive/override.cc:201 #, c-format -msgid "Failed to read the override file %s" -msgstr "无法读取 override 文件 %s" +msgid "Malformed line %lu in source list %s (URI)" +msgstr "安装源配置文件“%2$s”第 %1$lu 行的格式有误(URI)" -#: ftparchive/override.cc:166 #, c-format -msgid "Malformed override %s line %llu #1" -msgstr "override 文件 %s 第 %llu 行的格式有误 #1" +msgid "Malformed line %lu in source list %s (dist)" +msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误(发行版)" -#: ftparchive/override.cc:178 #, c-format -msgid "Malformed override %s line %llu #2" -msgstr "override 文件 %s 第 %llu 行的格式有误 #2" +msgid "Malformed line %lu in source list %s (URI parse)" +msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误(URI 解析)" -#: ftparchive/override.cc:191 #, c-format -msgid "Malformed override %s line %llu #3" -msgstr "override 文件 %s 第 %llu 行的格式有误 #3" +msgid "Malformed line %lu in source list %s (absolute dist)" +msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误(独立发行版)" -#: ftparchive/multicompress.cc:73 #, c-format -msgid "Unknown compression algorithm '%s'" -msgstr "未知的压缩算法“%s”" +msgid "Malformed line %lu in source list %s (dist parse)" +msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误(发行版解析)" -#: ftparchive/multicompress.cc:103 #, c-format -msgid "Compressed output %s needs a compression set" -msgstr "压缩后的输出文件 %s 要求有一个压缩文件集合" - -#: ftparchive/multicompress.cc:192 -msgid "Failed to create FILE*" -msgstr "无法创建 FILE*" +msgid "Opening %s" +msgstr "正在打开 %s" -#: ftparchive/multicompress.cc:195 -msgid "Failed to fork" -msgstr "无法 fork" +#, c-format +msgid "Malformed line %u in source list %s (type)" +msgstr "在源列表 %2$s 中第 %1$u 行的格式有误(类型)" -#: ftparchive/multicompress.cc:209 -msgid "Compress child" -msgstr "压缩子进程" +#, c-format +msgid "Type '%s' is not known on line %u in source list %s" +msgstr "无法识别在源列表 %3$s 里，第 %2$u 行中的软件包类别“%1$s”" -#: ftparchive/multicompress.cc:232 #, c-format -msgid "Internal error, failed to create %s" -msgstr "内部错误，无法创建 %s" +msgid "Type '%s' is not known on stanza %u in source list %s" +msgstr "无法识别在源列表 %3$s 里，第 %2$u 节中的软件包类别“%1$s”" -#: ftparchive/multicompress.cc:305 -msgid "IO to subprocess/file failed" -msgstr "无法对子进程或文件进行读写" +msgid "You must put some 'source' URIs in your sources.list" +msgstr "您必须在您的 sources.list 写入一些“软件源”的 URI" -#: ftparchive/multicompress.cc:343 -msgid "Failed to read while computing MD5" -msgstr "在计算 MD5 校验和时无法读取数据" +#, c-format +msgid "Unable to parse package file %s (1)" +msgstr "无法解析软件包文件 %s (1)" -#: ftparchive/multicompress.cc:359 #, c-format -msgid "Problem unlinking %s" -msgstr "在使用 unlink 删除 %s 时出错" +msgid "Unable to parse package file %s (2)" +msgstr "无法解析软件包文件 %s (2)" -#: cmdline/apt-internal-solver.cc:49 msgid "" -"Usage: apt-internal-solver\n" -"\n" -"apt-internal-solver is an interface to use the current internal\n" -"like an external resolver for the APT family for debugging or alike\n" -"\n" -"Options:\n" -" -h This help text.\n" -" -q Loggable output - no progress indicator\n" -" -c=? Read this configuration file\n" -" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n" -msgstr "" -"用法： apt-internal-solver\n" -"\n" -"apt-internal-solver 是个用于调试及类似用途的接口，它可以\n" -"像 APT 家族外部解决器(resolver)那样使用当前的内部解决器。\n" -"\n" -"选项：\n" -" -h 显示本帮助。\n" -" -q 日志型输出 - 无进度指示\n" -" -c=? 读取指定配置文件\n" -" -o=? 设置任意配置项，比如 -o dir::cache=/tmp\n" - -#: cmdline/apt-sortpkgs.cc:89 -msgid "Unknown package record!" -msgstr "未知的软件包记录！" +"Some index files failed to download. They have been ignored, or old ones " +"used instead." +msgstr "部分索引文件下载失败。如果忽略它们，那将转而使用旧的索引文件。" -#: cmdline/apt-sortpkgs.cc:153 -msgid "" -"Usage: apt-sortpkgs [options] file1 [file2 ...]\n" -"\n" -"apt-sortpkgs is a simple tool to sort package files. The -s option is used\n" -"to indicate what kind of file it is.\n" -"\n" -"Options:\n" -" -h This help text\n" -" -s Use source file sorting\n" -" -c=? Read this configuration file\n" -" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n" -msgstr "" -"用法： apt-sortpkgs [选项] 文件甲 [文件乙 ...]\n" -"\n" -"apt-sortpkgs 是对软件包索引文件内容进行排序的简单工具。-s 选项\n" -"是用来指出后面参数所示文件是哪种文件。\n" -"\n" -"选项：\n" -" -h 本帮助文档\n" -" -s 根据源文件排序\n" -" -c=? 读取指定配置文件\n" -" -o=? 设置任意指定的配置选项，例如 -o dir::cache=/tmp\n" +#, c-format +msgid "Vendor block %s contains no fingerprint" +msgstr "软件提供者数据块内 %s 没有包含指纹信息" #~ msgid "Is stdout a terminal?" #~ msgstr "stdout 是终端吗？" |