diff options
Diffstat (limited to 'po/zh_CN.po')
| -rw-r--r-- | po/zh_CN.po | 4252 |
1 files changed, 4252 insertions, 0 deletions
diff --git a/po/zh_CN.po b/po/zh_CN.po new file mode 100644 index 000000000..54cc25854 --- /dev/null +++ b/po/zh_CN.po @@ -0,0 +1,4252 @@ +# Chinese/Simplified translation of apt. +# This file is put in the public domain. +# Deng Xiyue <manphiz-guest@users.alioth.debian.org>, 2007, 2008. +# Tchaikov <tchaikov@sjtu.org>, 2005, 2007. +# Carlos Z.F. Liu <carlosliu@users.sourceforge.net>, 2004, 2006. +# Aron Xu <happyaron.xu@gmail.com>, 2009, 2010. +# Zhou Mo <cdluminate@gmail.com>, 2014, 2015, 2016. +# +msgid "" +msgstr "" +"Project-Id-Version: apt 1.2.x\n" +"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n" +"POT-Creation-Date: 2016-08-30 22:20+0200\n" +"PO-Revision-Date: 2016-08-20 13:00+0000\n" +"Last-Translator: Zhou Mo <cdluminate@gmail.com>\n" +"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n" +"Language: zh_CN\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=1; plural=0;\n" + +#: apt-inst/contrib/arfile.cc +msgid "Invalid archive signature" +msgstr "无效的归档签名" + +#: apt-inst/contrib/arfile.cc +msgid "Error reading archive member header" +msgstr "读取归档成员文件头出错" + +#: apt-inst/contrib/arfile.cc +#, c-format +msgid "Invalid archive member header %s" +msgstr "归档文件中成员文件头 %s 无效" + +#: apt-inst/contrib/arfile.cc +msgid "Invalid archive member header" +msgstr "归档文件中成员文件头无效" + +#: apt-inst/contrib/arfile.cc +msgid "Archive is too short" +msgstr "归档文件太短" + +#: apt-inst/contrib/arfile.cc +msgid "Failed to read the archive headers" +msgstr "无法读取归档文件的数据头" + +#: apt-inst/contrib/extracttar.cc +#, c-format +msgid "Cannot find a configured compressor for '%s'" +msgstr "找不到对应于 '%s' 的已配置压缩工具" + +#: apt-inst/contrib/extracttar.cc +msgid "Corrupted archive" +msgstr "包文件已被损坏" + +#: apt-inst/contrib/extracttar.cc +msgid "Tar checksum failed, archive corrupted" +msgstr "Tar 的校验和不符，文件已损坏" + +#: apt-inst/contrib/extracttar.cc +#, c-format +msgid "Unknown TAR header type %u, member %s" +msgstr "未知的 TAR 数据头类型 %u，成员 %s" + +#: apt-inst/deb/debfile.cc +#, c-format +msgid "This is not a valid DEB archive, missing '%s' member" +msgstr "这不是一个有效的 DEB 包文件，其包内遗漏了“%s”" + +#: apt-inst/deb/debfile.cc +#, c-format +msgid "Internal error, could not locate member %s" +msgstr "内部错误，无法定位包内文件 %s" + +#: apt-inst/deb/debfile.cc +msgid "Unparsable control file" +msgstr "不能解析的主控文件" + +#: apt-inst/dirstream.cc +#, c-format +msgid "Failed to write file %s" +msgstr "无法写入文件 %s" + +#: apt-inst/dirstream.cc +#, c-format +msgid "Failed to close file %s" +msgstr "无法关闭文件 %s" + +#: apt-inst/extract.cc +#, c-format +msgid "The path %s is too long" +msgstr "路径名 %s 太长" + +#: apt-inst/extract.cc +#, c-format +msgid "Unpacking %s more than once" +msgstr "%s 被解压了不只一次" + +#: apt-inst/extract.cc +#, c-format +msgid "The directory %s is diverted" +msgstr "目录 %s 已被转移" + +#: apt-inst/extract.cc +#, c-format +msgid "The package is trying to write to the diversion target %s/%s" +msgstr "该软件包正尝试写入转移对象 %s/%s" + +#: apt-inst/extract.cc +msgid "The diversion path is too long" +msgstr "该转移路径太长" + +#: apt-inst/extract.cc apt-pkg/acquire-item.cc ftparchive/cachedb.cc +#: methods/rred.cc +#, c-format +msgid "Failed to stat %s" +msgstr "无法获得 %s 的状态" + +#: apt-inst/extract.cc ftparchive/multicompress.cc +#, c-format +msgid "Failed to rename %s to %s" +msgstr "无法将 %s 重命名为 %s" + +#: apt-inst/extract.cc +#, c-format +msgid "The directory %s is being replaced by a non-directory" +msgstr "目录 %s 要被一个非目录的文件替换" + +#: apt-inst/extract.cc +msgid "Failed to locate node in its hash bucket" +msgstr "无法在其散列桶中分配节点" + +#: apt-inst/extract.cc +msgid "The path is too long" +msgstr "路径名太长" + +#: apt-inst/extract.cc +#, c-format +msgid "Overwrite package match with no version for %s" +msgstr "用来覆盖的软件包不属于 %s 的任何版本" + +#: apt-inst/extract.cc +#, c-format +msgid "File %s/%s overwrites the one in the package %s" +msgstr "文件 %s/%s 会覆盖属于软件包 %s 中的同名文件" + +#. Only warn if there are no sources.list.d. +#. Only warn if there is no sources.list file. +#: apt-inst/extract.cc apt-pkg/acquire.cc apt-pkg/clean.cc +#: apt-pkg/contrib/cdromutl.cc apt-pkg/contrib/fileutl.cc apt-pkg/deb/dpkgpm.cc +#: apt-pkg/init.cc apt-pkg/policy.cc apt-pkg/sourcelist.cc methods/mirror.cc +#, c-format +msgid "Unable to read %s" +msgstr "无法读取 %s" + +#: apt-inst/extract.cc +#, c-format +msgid "Unable to stat %s" +msgstr "无法读取 %s 的状态" + +#: apt-inst/filelist.cc +msgid "DropNode called on still linked node" +msgstr "把 DropNode 用在了仍在链表中的节点上" + +#: apt-inst/filelist.cc +msgid "Failed to locate the hash element!" +msgstr "无法定位哈希表元素！" + +#: apt-inst/filelist.cc +msgid "Failed to allocate diversion" +msgstr "无法分配转移项" + +#: apt-inst/filelist.cc +msgid "Internal error in AddDiversion" +msgstr "内部错误，出现在 AddDiversion" + +#: apt-inst/filelist.cc +#, c-format +msgid "Trying to overwrite a diversion, %s -> %s and %s/%s" +msgstr "尝试覆盖一个转移项，%s -> %s 和 %s/%s" + +#: apt-inst/filelist.cc +#, c-format +msgid "Double add of diversion %s -> %s" +msgstr "添加了两个转移项 %s-> %s" + +#: apt-inst/filelist.cc +#, c-format +msgid "Duplicate conf file %s/%s" +msgstr "重复的配置文件 %s/%s" + +#: apt-pkg/acquire-item.cc +msgid "" +"Updating from such a repository can't be done securely, and is therefore " +"disabled by default." +msgstr "无法安全地用该源进行更新，所以默认禁用该源。" + +#: apt-pkg/acquire-item.cc +msgid "" +"Data from such a repository can't be authenticated and is therefore " +"potentially dangerous to use." +msgstr "无法认证来自该源的数据，所以使用它会带来潜在风险。" + +#: apt-pkg/acquire-item.cc +msgid "" +"See apt-secure(8) manpage for repository creation and user configuration " +"details." +msgstr "参见 apt-secure(8) 手册以了解仓库创建和用户配置方面的细节。" + +#: apt-pkg/acquire-item.cc +#, c-format +msgid "The repository '%s' is no longer signed." +msgstr "仓库 “%s” 的签名不再生效。" + +#: apt-pkg/acquire-item.cc +#, c-format +msgid "The repository '%s' does no longer have a Release file." +msgstr "仓库 “%s” 不再含有 Release 文件。" + +#: apt-pkg/acquire-item.cc +msgid "" +"This is normally not allowed, but the option Acquire::" +"AllowDowngradeToInsecureRepositories was given to override it." +msgstr "" +"一般不可以这样做，但选项 Acquire:: AllowDowngradeToInsecureRepositories 可以" +"用于覆盖默认设置。" + +#: apt-pkg/acquire-item.cc +#, c-format +msgid "The repository '%s' is not signed." +msgstr "仓库 “%s” 没有数字签名。" + +#: apt-pkg/acquire-item.cc +#, c-format +msgid "The repository '%s' does not have a Release file." +msgstr "仓库 “%s” 没有 Release 文件。" + +#: apt-pkg/acquire-item.cc +#, c-format +msgid "The repository '%s' provides only weak security information." +msgstr "仓库 '%s' 只提供了低强度的安全信息。" + +#: apt-pkg/acquire-item.cc ftparchive/writer.cc +#, c-format +msgid "Failed to readlink %s" +msgstr "无法读取符号链接 %s" + +#: apt-pkg/acquire-item.cc +msgid "Hash Sum mismatch" +msgstr "Hash 校验和不符" + +#: apt-pkg/acquire-item.cc +msgid "Insufficient information available to perform this download securely" +msgstr "可用信息不足，不能安全执行本次下载" + +#: apt-pkg/acquire-item.cc apt-pkg/contrib/fileutl.cc +#, c-format +msgid "rename failed, %s (%s -> %s)." +msgstr "无法重命名文件，%s (%s -> %s)。" + +#: apt-pkg/acquire-item.cc +msgid "Size mismatch" +msgstr "大小不符" + +#: apt-pkg/acquire-item.cc +msgid "Invalid file format" +msgstr "无效的文件格式 %s" + +#: apt-pkg/acquire-item.cc +msgid "Signature error" +msgstr "数字签名错误" + +#. TRANSLATORS: %s is a single techy word like 'NODATA' +#: apt-pkg/acquire-item.cc methods/gpgv.cc +#, c-format +msgid "" +"Clearsigned file isn't valid, got '%s' (does the network require " +"authentication?)" +msgstr "明文签署文件不可用，结果为‘%s’（您的网络需要认证吗？）" + +#: apt-pkg/acquire-item.cc +#, c-format +msgid "" +"An error occurred during the signature verification. The repository is not " +"updated and the previous index files will be used. GPG error: %s: %s" +msgstr "" +"校验数字签名时出错。此仓库未被更新，所以仍然使用此前的索引文件。GPG 错误：" +"%s: %s" + +#. Invalid signature file, reject (LP: #346386) (Closes: #627642) +#: apt-pkg/acquire-item.cc +#, c-format +msgid "GPG error: %s: %s" +msgstr "GPG 错误：%s: %s" + +#: apt-pkg/acquire-item.cc +#, c-format +msgid "" +"Skipping acquire of configured file '%s' as repository '%s' doesn't support " +"architecture '%s'" +msgstr "鉴于仓库 '%2$s' 不支持 '%3$s' 体系结构，跳过配置文件 '%1$s' 的捕获。" + +#: apt-pkg/acquire-item.cc +#, c-format +msgid "" +"Unable to find expected entry '%s' in Release file (Wrong sources.list entry " +"or malformed file)" +msgstr "" +"在 Release 文件中找不到期望的条目 %s（sources.list条目有误，或者文件有误）" + +#: apt-pkg/acquire-item.cc +#, c-format +msgid "" +"Skipping acquire of configured file '%s' as repository '%s' provides only " +"weak security information for it" +msgstr "鉴于仓库 '%2$s' 提供的安全信息强度太低，跳过配置文件 '%1$s' 的acquire." + +#. TRANSLATOR: The first %s is the URL of the bad Release file, the second is +#. the time since then the file is invalid - formatted in the same way as in +#. the download progress display (e.g. 7d 3h 42min 1s) +#: apt-pkg/acquire-item.cc +#, c-format +msgid "" +"Release file for %s is expired (invalid since %s). Updates for this " +"repository will not be applied." +msgstr "" +"%s 的 Release 文件已经过期(invalid since %s)。该仓库的更新将不会被应用。" + +#: apt-pkg/acquire-item.cc +#, c-format +msgid "Conflicting distribution: %s (expected %s but got %s)" +msgstr "冲突的发行版：%s (期望 %s 但得到 %s)" + +#: apt-pkg/acquire-item.cc +#, c-format +msgid "" +"I wasn't able to locate a file for the %s package. This might mean you need " +"to manually fix this package. (due to missing arch)" +msgstr "" +"我无法找到一个对应 %s 软件包的文件。在这种情况下可能需要您手动修正这个软件" +"包。(缘于架构缺失)" + +#: apt-pkg/acquire-item.cc +#, c-format +msgid "Can't find a source to download version '%s' of '%s'" +msgstr "没有源可以用来下载 %s 版本的 %s" + +#: apt-pkg/acquire-item.cc +#, c-format +msgid "" +"The package index files are corrupted. No Filename: field for package %s." +msgstr "软件包的索引文件已损坏。找不到对应软件包 %s 的 Filename: 字段。" + +#. TRANSLATOR: %s=%s is sourcename=sourceversion, e.g. apt=1.1 +#: apt-pkg/acquire-item.cc +#, c-format +msgid "Changelog unavailable for %s=%s" +msgstr "%s=%s 的 Changelog 不可用" + +#: apt-pkg/acquire-worker.cc +#, c-format +msgid "The method '%s' is explicitly disabled via configuration." +msgstr "方法‘%s’已经被显式设置为禁用。" + +#: apt-pkg/acquire-worker.cc methods/connect.cc +#, c-format +msgid "If you meant to use Tor remember to use %s instead of %s." +msgstr "如果您需要使用Tor，请确认使用%s而不是%s。" + +#: apt-pkg/acquire-worker.cc +#, c-format +msgid "The method driver %s could not be found." +msgstr "无法找到获取软件包的渠道 %s 所需的驱动程序。" + +#: apt-pkg/acquire-worker.cc +#, c-format +msgid "Is the package %s installed?" +msgstr "请检查是否安装了 %s 软件包" + +#: apt-pkg/acquire-worker.cc +#, c-format +msgid "Method %s did not start correctly" +msgstr "获取软件包的渠道 %s 所需的驱动程序没有正常启动。" + +#: apt-pkg/acquire-worker.cc +#, c-format +msgid "" +"Please insert the disc labeled: '%s' in the drive '%s' and press [Enter]." +msgstr "请把标有 “%s” 的盘片插入驱动器 “%s” 再按「回车键」。" + +#: apt-pkg/acquire.cc apt-pkg/cdrom.cc +#, c-format +msgid "List directory %spartial is missing." +msgstr "软件包列表的目录 %spartial 缺失。" + +#: apt-pkg/acquire.cc +#, c-format +msgid "Archives directory %spartial is missing." +msgstr "仓库目录 %spartial 确实。" + +#: apt-pkg/acquire.cc +#, c-format +msgid "Unable to lock directory %s" +msgstr "无法对目录 %s 加锁" + +#: apt-pkg/acquire.cc +#, c-format +msgid "No sandbox user '%s' on the system, can not drop privileges" +msgstr "系统中不存在沙箱用户'%s'，无法降低权限" + +#: apt-pkg/acquire.cc +#, c-format +msgid "" +"Can't drop privileges for downloading as file '%s' couldn't be accessed by " +"user '%s'." +msgstr "文件'%s'无法被用户'%s'访问，无法降低权限以进行下载。" + +#: apt-pkg/acquire.cc apt-pkg/clean.cc +#, c-format +msgid "Clean of %s is not supported" +msgstr "%s 的 Clean (清理)不被支持" + +#: apt-pkg/acquire.cc apt-pkg/clean.cc apt-pkg/contrib/cdromutl.cc +#: methods/mirror.cc +#, c-format +msgid "Unable to change to %s" +msgstr "无法切换工作目录到 %s" + +#. only show the ETA if it makes sense +#. two days +#: apt-pkg/acquire.cc +#, c-format +msgid "Retrieving file %li of %li (%s remaining)" +msgstr "正在下载第 %li 个文件，共 %li 个(还剩 %s 个)" + +#: apt-pkg/acquire.cc +#, c-format +msgid "Retrieving file %li of %li" +msgstr "正在下载第 %li 个文件，共 %li 个" + +#: apt-pkg/algorithms.cc +#, c-format +msgid "" +"The package %s needs to be reinstalled, but I can't find an archive for it." +msgstr "软件包 %s 需要重新安装，但是我无法找到相应的安装文件。" + +#: apt-pkg/algorithms.cc +msgid "" +"Error, pkgProblemResolver::Resolve generated breaks, this may be caused by " +"held packages." +msgstr "" +"错误，pkgProblemResolver::Resolve 发生故障，这可能是有软件包被要求保持现状的" +"缘故。" + +#: apt-pkg/algorithms.cc +msgid "Unable to correct problems, you have held broken packages." +msgstr "" +"无法修正错误，因为您要求某些软件包保持现状，就是它们破坏了软件包间的依赖关" +"系。" + +#: apt-pkg/cachefile.cc +msgid "The package lists or status file could not be parsed or opened." +msgstr "无法解析或打开软件包的列表或是状态文件。" + +#: apt-pkg/cachefile.cc +msgid "You may want to run apt-get update to correct these problems" +msgstr "您可能需要运行 apt-get update 来解决这些问题" + +#: apt-pkg/cachefile.cc +msgid "The list of sources could not be read." +msgstr "无法读取源列表。" + +#: apt-pkg/cachefilter.cc apt-private/private-output.cc +#, c-format +msgid "Regex compilation error - %s" +msgstr "编译正则表达式时出错 - %s" + +#: apt-pkg/cacheset.cc +#, c-format +msgid "Release '%s' for '%s' was not found" +msgstr "未找到“%2$s”的“%1$s”发布版本" + +#: apt-pkg/cacheset.cc +#, c-format +msgid "Version '%s' for '%s' was not found" +msgstr "未找到“%2$s”的“%1$s”版本" + +#: apt-pkg/cacheset.cc +#, c-format +msgid "Couldn't find task '%s'" +msgstr "无法找到任务 %s" + +#: apt-pkg/cacheset.cc +#, c-format +msgid "Couldn't find any package by regex '%s'" +msgstr "无法按照正则表达式 %s 找到任何软件包" + +#: apt-pkg/cacheset.cc +#, c-format +msgid "Couldn't find any package by glob '%s'" +msgstr "无法按照 glob ‘%s’ 找到任何软件包" + +#: apt-pkg/cacheset.cc apt-private/private-show.cc +#, c-format +msgid "Unable to locate package %s" +msgstr "无法定位软件包 %s" + +#: apt-pkg/cacheset.cc +#, c-format +msgid "Can't select versions from package '%s' as it is purely virtual" +msgstr "无法从完全虚拟的软件包 %s 中选择版本" + +#: apt-pkg/cacheset.cc +#, c-format +msgid "Can't select newest version from package '%s' as it is purely virtual" +msgstr "因为软件包 %s 是完全的虚拟软件包，无法选择它的最新版" + +#: apt-pkg/cacheset.cc +#, c-format +msgid "Can't select candidate version from package %s as it has no candidate" +msgstr "因为软件包 %s 没有候选版本，无法进行选择" + +#: apt-pkg/cacheset.cc +#, c-format +msgid "Can't select installed version from package %s as it is not installed" +msgstr "因为软件包 %s 没有安装，无法选择它的已安装版本" + +#: apt-pkg/cacheset.cc +#, c-format +msgid "" +"Can't select installed nor candidate version from package '%s' as it has " +"neither of them" +msgstr "因为软件包 %s 没有已安装或候选的版本，无法进行选择" + +#: apt-pkg/cdrom.cc +#, c-format +msgid "Line %u too long in source list %s." +msgstr "源列表 %2$s 的第 %1$u 行太长了。" + +#: apt-pkg/cdrom.cc +msgid "Unmounting CD-ROM...\n" +msgstr "正在卸载 CD-ROM...\n" + +#: apt-pkg/cdrom.cc +#, c-format +msgid "Using CD-ROM mount point %s\n" +msgstr "现把 %s 作为了 CD-ROM 的挂载点\n" + +#: apt-pkg/cdrom.cc +msgid "Waiting for disc...\n" +msgstr "等待插入盘片……\n" + +#: apt-pkg/cdrom.cc +msgid "Mounting CD-ROM...\n" +msgstr "正在挂载 CD-ROM 文件系统……\n" + +#: apt-pkg/cdrom.cc +msgid "Identifying... " +msgstr "正在鉴别... " + +#: apt-pkg/cdrom.cc +#, c-format +msgid "Stored label: %s\n" +msgstr "已归档文件的标签：%s\n" + +#: apt-pkg/cdrom.cc +msgid "Scanning disc for index files...\n" +msgstr "正在盘片中查找索引文件...\n" + +#: apt-pkg/cdrom.cc +#, c-format +msgid "" +"Found %zu package indexes, %zu source indexes, %zu translation indexes and " +"%zu signatures\n" +msgstr "" +"找到了 %zu 个软件包索引、%zu 个源代码包索引、%zu 个翻译索引和 %zu 个数字签" +"名\n" + +#: apt-pkg/cdrom.cc +msgid "" +"Unable to locate any package files, perhaps this is not a Debian Disc or the " +"wrong architecture?" +msgstr "" +"无法确定任何包文件的位置，可能这不是一张 Debian 盘片或者是选择了错误的硬件构" +"架。" + +#: apt-pkg/cdrom.cc +#, c-format +msgid "Found label '%s'\n" +msgstr "找到标签 '%s'\n" + +#: apt-pkg/cdrom.cc +msgid "That is not a valid name, try again.\n" +msgstr "这不是一个有效的名字，请重试。\n" + +#: apt-pkg/cdrom.cc +#, c-format +msgid "" +"This disc is called: \n" +"'%s'\n" +msgstr "" +"这张盘片现在的名字是：\n" +"“%s”\n" + +#: apt-pkg/cdrom.cc +msgid "Copying package lists..." +msgstr "正在复制软件包列表……" + +#: apt-pkg/cdrom.cc +msgid "Writing new source list\n" +msgstr "正在写入新的源列表\n" + +#: apt-pkg/cdrom.cc +msgid "Source list entries for this disc are:\n" +msgstr "对应于该盘片的软件源设置项是：\n" + +#: apt-pkg/clean.cc +#, c-format +msgid "Unable to stat %s." +msgstr "无法读取 %s 的状态。" + +#: apt-pkg/contrib/cdromutl.cc +#, c-format +msgid "Unable to stat the mount point %s" +msgstr "无法读取文件系统挂载点 %s 的状态" + +#: apt-pkg/contrib/cdromutl.cc +msgid "Failed to stat the cdrom" +msgstr "无法读取盘片的状态" + +#: apt-pkg/contrib/cmndline.cc +#, c-format +msgid "" +"Command line option '%c' [from %s] is not understood in combination with the " +"other options." +msgstr "不能理解命令行选项 “%c” [来自 %s] 与其他选项的搭配。" + +#: apt-pkg/contrib/cmndline.cc +#, c-format +msgid "" +"Command line option %s is not understood in combination with the other " +"options" +msgstr "不能理解命令行选项 “%s” 与其他选项的搭配。" + +#: apt-pkg/contrib/cmndline.cc +#, c-format +msgid "Command line option %s is not boolean" +msgstr "命令行选项 %s 不是布尔值" + +#: apt-pkg/contrib/cmndline.cc +#, c-format +msgid "Option %s requires an argument." +msgstr "选项 %s 要求有一个参数" + +#: apt-pkg/contrib/cmndline.cc +#, c-format +msgid "Option %s: Configuration item specification must have an =<val>." +msgstr "选项 %s：配置项后必须包含有形如“=<变量>”的具体指定" + +#: apt-pkg/contrib/cmndline.cc +#, c-format +msgid "Option %s requires an integer argument, not '%s'" +msgstr "选项 %s 要求有一个整数作为参数，而不是“%s”" + +#: apt-pkg/contrib/cmndline.cc +#, c-format +msgid "Option '%s' is too long" +msgstr "选项“%s”太长" + +#: apt-pkg/contrib/cmndline.cc +#, c-format +msgid "Sense %s is not understood, try true or false." +msgstr "不能识别参数 %s，请用 true 或 false" + +#: apt-pkg/contrib/cmndline.cc +#, c-format +msgid "Invalid operation %s" +msgstr "无效的操作 %s" + +#: apt-pkg/contrib/configuration.cc +#, c-format +msgid "Unrecognized type abbreviation: '%c'" +msgstr "无法识别的类型缩写：“%c”" + +#: apt-pkg/contrib/configuration.cc +#, c-format +msgid "Opening configuration file %s" +msgstr "正在打开配置文件 %s" + +#: apt-pkg/contrib/configuration.cc +#, c-format +msgid "Syntax error %s:%u: Block starts with no name." +msgstr "语法错误 %s:%u：配置小节没有以名字开头" + +#: apt-pkg/contrib/configuration.cc +#, c-format +msgid "Syntax error %s:%u: Malformed tag" +msgstr "语法错误 %s:%u：标签格式有误" + +#: apt-pkg/contrib/configuration.cc +#, c-format +msgid "Syntax error %s:%u: Extra junk after value" +msgstr "语法错误 %s:%u：配置值后有多余的无意义数据" + +#: apt-pkg/contrib/configuration.cc +#, c-format +msgid "Syntax error %s:%u: Directives can only be done at the top level" +msgstr "语法错误 %s:%u：只能在顶层配置文件中使用指示" + +#: apt-pkg/contrib/configuration.cc +#, c-format +msgid "Syntax error %s:%u: Too many nested includes" +msgstr "语法错误 %s:%u：太多的嵌套 include 命令" + +#: apt-pkg/contrib/configuration.cc +#, c-format +msgid "Syntax error %s:%u: Included from here" +msgstr "语法错误 %s:%u：Included from here" + +#: apt-pkg/contrib/configuration.cc +#, c-format +msgid "Syntax error %s:%u: Unsupported directive '%s'" +msgstr "语法错误 %s:%u：不支持的指令“%s”" + +#: apt-pkg/contrib/configuration.cc +#, c-format +msgid "Syntax error %s:%u: clear directive requires an option tree as argument" +msgstr "语法错误 %s:%u：clean 指令需要一个选项树作为参数" + +#: apt-pkg/contrib/configuration.cc +#, c-format +msgid "Syntax error %s:%u: Extra junk at end of file" +msgstr "语法错误 %s:%u：文件尾部有多余的无意义的数据" + +#: apt-pkg/contrib/fileutl.cc +#, c-format +msgid "Problem unlinking the file %s" +msgstr "用 unlink 删除文件 %s 出错" + +#: apt-pkg/contrib/fileutl.cc +#, c-format +msgid "Not using locking for read only lock file %s" +msgstr "由于文件系统为只读，因而无法使用文件锁 %s" + +#: apt-pkg/contrib/fileutl.cc +#, c-format +msgid "Could not open lock file %s" +msgstr "无法打开锁文件 %s" + +#: apt-pkg/contrib/fileutl.cc +#, c-format +msgid "Not using locking for nfs mounted lock file %s" +msgstr "无法在 nfs 文件系统上使用文件锁 %s" + +#: apt-pkg/contrib/fileutl.cc +#, c-format +msgid "Could not get lock %s" +msgstr "无法获得锁 %s" + +#: apt-pkg/contrib/fileutl.cc +#, c-format +msgid "List of files can't be created as '%s' is not a directory" +msgstr "无法创建文件列表，因为‘%s’不是一个目录" + +#: apt-pkg/contrib/fileutl.cc +#, c-format +msgid "Ignoring '%s' in directory '%s' as it is not a regular file" +msgstr "忽略‘%s’(于目录‘%s’)，鉴于它不是一个常规文件" + +#: apt-pkg/contrib/fileutl.cc +#, c-format +msgid "Ignoring file '%s' in directory '%s' as it has no filename extension" +msgstr "忽略‘%s’(于目录‘%s’)，鉴于它没有文件扩展名" + +#: apt-pkg/contrib/fileutl.cc +#, c-format +msgid "" +"Ignoring file '%s' in directory '%s' as it has an invalid filename extension" +msgstr "忽略‘%s’(于目录‘%s’)，鉴于它的文件扩展名无效" + +#: apt-pkg/contrib/fileutl.cc apt-pkg/contrib/gpgv.cc apt-pkg/deb/debsystem.cc +#: cmdline/apt-dump-solver.cc +#, c-format +msgid "Waited for %s but it wasn't there" +msgstr "等待子进程 %s 的退出，但是它并不存在" + +#: apt-pkg/contrib/fileutl.cc +#, c-format +msgid "Sub-process %s received a segmentation fault." +msgstr "子进程 %s 发生了段错误" + +#: apt-pkg/contrib/fileutl.cc +#, c-format +msgid "Sub-process %s received signal %u." +msgstr "子进程 %s 收到信号 %u。" + +#: apt-pkg/contrib/fileutl.cc apt-pkg/contrib/gpgv.cc +#, c-format +msgid "Sub-process %s returned an error code (%u)" +msgstr "子进程 %s 返回了一个错误号 (%u)" + +#: apt-pkg/contrib/fileutl.cc apt-pkg/contrib/gpgv.cc +#, c-format +msgid "Sub-process %s exited unexpectedly" +msgstr "子进程 %s 异常退出" + +#: apt-pkg/contrib/fileutl.cc methods/ftp.cc methods/rsh.cc +msgid "Read error" +msgstr "读错误" + +#: apt-pkg/contrib/fileutl.cc methods/ftp.cc methods/rsh.cc +msgid "Write error" +msgstr "写出错" + +#: apt-pkg/contrib/fileutl.cc +#, c-format +msgid "Problem closing the gzip file %s" +msgstr "关闭 gzip %s 文件出错" + +#: apt-pkg/contrib/fileutl.cc +msgid "Unexpected end of file" +msgstr "未预期的文件结束符" + +#: apt-pkg/contrib/fileutl.cc +msgid "Failed to create subprocess IPC" +msgstr "无法创建子进程的 IPC 管道" + +#: apt-pkg/contrib/fileutl.cc +msgid "Failed to exec compressor " +msgstr "无法执行压缩程序" + +#: apt-pkg/contrib/fileutl.cc +#, c-format +msgid "Could not open file %s" +msgstr "无法打开文件 %s" + +#: apt-pkg/contrib/fileutl.cc +#, c-format +msgid "Could not open file descriptor %d" +msgstr "无法打开文件描述符 %d" + +#: apt-pkg/contrib/fileutl.cc +#, c-format +msgid "read, still have %llu to read but none left" +msgstr "还剩 %llu 字节没有读出，但已没有可读信息" + +#: apt-pkg/contrib/fileutl.cc +#, c-format +msgid "write, still have %llu to write but couldn't" +msgstr "还剩 %llu 字节没有写入，但无法写入操作" + +#: apt-pkg/contrib/fileutl.cc +#, c-format +msgid "Problem closing the file %s" +msgstr "关闭文件 %s 出错" + +#: apt-pkg/contrib/fileutl.cc +#, c-format +msgid "Problem renaming the file %s to %s" +msgstr "重命名文件 %s 为 %s 出错" + +#: apt-pkg/contrib/fileutl.cc +msgid "Problem syncing the file" +msgstr "同步文件出错" + +#: apt-pkg/contrib/fileutl.cc cmdline/apt-extracttemplates.cc +#, c-format +msgid "Unable to mkstemp %s" +msgstr "无法建立临时文件(mkstemp) %s " + +#: apt-pkg/contrib/fileutl.cc cmdline/apt-extracttemplates.cc +#, c-format +msgid "Unable to write to %s" +msgstr "无法写入 %s" + +#: apt-pkg/contrib/mmap.cc +msgid "Can't mmap an empty file" +msgstr "无法 mmap 一个空文件" + +#: apt-pkg/contrib/mmap.cc +#, c-format +msgid "Couldn't make mmap of %llu bytes" +msgstr "无法 mmap %llu 字节的数据" + +#: apt-pkg/contrib/mmap.cc +#, c-format +msgid "Couldn't duplicate file descriptor %i" +msgstr "无法为复制文件描述符 %i" + +#: apt-pkg/contrib/mmap.cc +msgid "Unable to close mmap" +msgstr "无法关闭 mmap" + +#: apt-pkg/contrib/mmap.cc +msgid "Unable to synchronize mmap" +msgstr "无法同步 mmap " + +#: apt-pkg/contrib/mmap.cc +#, c-format +msgid "Couldn't make mmap of %lu bytes" +msgstr "无法 mmap %lu 字节的数据" + +#: apt-pkg/contrib/mmap.cc +msgid "Failed to truncate file" +msgstr "无法截断文件" + +#: apt-pkg/contrib/mmap.cc +#, c-format +msgid "" +"Dynamic MMap ran out of room. Please increase the size of APT::Cache-Start. " +"Current value: %lu. (man 5 apt.conf)" +msgstr "" +"动态 MMap 没有空间了。请增大 APT::Cache-Start 的大小。当前值：%lu。(man 5 " +"apt.conf)" + +#: apt-pkg/contrib/mmap.cc +#, c-format +msgid "" +"Unable to increase the size of the MMap as the limit of %lu bytes is already " +"reached." +msgstr "无法增加 MMap 的大小，因为已经达到 %lu 字节的限制。" + +#: apt-pkg/contrib/mmap.cc +msgid "" +"Unable to increase size of the MMap as automatic growing is disabled by user." +msgstr "无法增加 MMap 大小，因为用户已禁用自动增加。" + +#: apt-pkg/contrib/progress.cc +#, c-format +msgid "%c%s... Error!" +msgstr "%c%s... 有错误！" + +#: apt-pkg/contrib/progress.cc +#, c-format +msgid "%c%s... Done" +msgstr "%c%s... 完成" + +#: apt-pkg/contrib/progress.cc +msgid "..." +msgstr "..." + +#. Print the spinner +#: apt-pkg/contrib/progress.cc +#, c-format +msgid "%c%s... %u%%" +msgstr "%c%s... %u%%" + +#. TRANSLATOR: d means days, h means hours, min means minutes, s means seconds +#: apt-pkg/contrib/strutl.cc +#, c-format +msgid "%lid %lih %limin %lis" +msgstr "%li天 %li小时 %li分 %li秒" + +#. TRANSLATOR: h means hours, min means minutes, s means seconds +#: apt-pkg/contrib/strutl.cc +#, c-format +msgid "%lih %limin %lis" +msgstr "%li小时 %li分 %li秒" + +#. TRANSLATOR: min means minutes, s means seconds +#: apt-pkg/contrib/strutl.cc +#, c-format +msgid "%limin %lis" +msgstr "%li分 %li秒" + +#. TRANSLATOR: s means seconds +#: apt-pkg/contrib/strutl.cc +#, c-format +msgid "%lis" +msgstr "%li秒" + +#: apt-pkg/contrib/strutl.cc +#, c-format +msgid "Selection %s not found" +msgstr "找不到您选则的 %s" + +#. TRANSLATOR: an identifier like Packages; Releasefile key indicating +#. a file like main/binary-amd64/Packages; another identifier like Contents; +#. filename and linenumber of the sources.list entry currently parsed +#: apt-pkg/deb/debmetaindex.cc +#, c-format +msgid "Target %s wants to acquire the same file (%s) as %s from source %s" +msgstr "目标 %1$s 想要捕获与 %3$s (来自软件源 %4$s) 相同的文件 (%2$s)" + +#. TRANSLATOR: an identifier like Packages; Releasefile key indicating +#. a file like main/binary-amd64/Packages; filename and linenumber of +#. two sources.list entries +#: apt-pkg/deb/debmetaindex.cc +#, c-format +msgid "Target %s (%s) is configured multiple times in %s and %s" +msgstr "目标 %s (%s) 在 %s 和 %s 中被配置了多次" + +#: apt-pkg/deb/debmetaindex.cc +#, c-format +msgid "Unable to parse Release file %s" +msgstr "无法解析软件包仓库 Release 文件 %s" + +#: apt-pkg/deb/debmetaindex.cc +#, c-format +msgid "No sections in Release file %s" +msgstr "软件包仓库 Release 文件 %s 内无组件章节信息" + +#: apt-pkg/deb/debmetaindex.cc +#, c-format +msgid "No Hash entry in Release file %s" +msgstr "软件包仓库 Release 文件 %s 内无哈希条目" + +#: apt-pkg/deb/debmetaindex.cc +#, c-format +msgid "" +"No Hash entry in Release file %s which is considered strong enough for " +"security purposes" +msgstr "Release 文件 %s 中不含散列项，该文件用于保证足够的安全性。" + +#: apt-pkg/deb/debmetaindex.cc +#, c-format +msgid "Invalid '%s' entry in Release file %s" +msgstr "软件包仓库 Release 文件 %2$s 内 %1$s 条目无效" + +#. TRANSLATOR: The first is an option name from sources.list manpage, the other two URI and Suite +#: apt-pkg/deb/debmetaindex.cc +#, c-format +msgid "Conflicting values set for option %s regarding source %s %s" +msgstr "软件源 %2$s %3$s 的选项 %1$s 中含有互相冲突的值" + +#: apt-pkg/deb/debmetaindex.cc +#, c-format +msgid "Invalid value set for option %s regarding source %s %s (%s)" +msgstr "软件源 %2$s %3$s (%4$s) 的选项 %1$s 中含有无效值" + +#: apt-pkg/deb/debmetaindex.cc +#, c-format +msgid "Conflicting values set for option %s regarding source %s %s: %s != %s" +msgstr "软件源 %2$s %3$s 的选项 %1$s 中含有互相冲突的值：%4$s != %5$s" + +#: apt-pkg/deb/debrecords.cc apt-pkg/tagfile.cc +#, c-format +msgid "Unable to parse package file %s (%d)" +msgstr "无法解析软件包文件 %s (%d)" + +#: apt-pkg/deb/debsystem.cc +#, c-format +msgid "" +"Unable to lock the administration directory (%s), is another process using " +"it?" +msgstr "无法锁定管理目录(%s)，是否有其他进程正占用它？" + +#: apt-pkg/deb/debsystem.cc +#, c-format +msgid "Unable to lock the administration directory (%s), are you root?" +msgstr "无法对状态列表目录加锁(%s)，请查看您是否正以 root 用户运行？" + +#. TRANSLATORS: the %s contains the recovery command, usually +#. dpkg --configure -a +#: apt-pkg/deb/debsystem.cc +#, c-format +msgid "" +"dpkg was interrupted, you must manually run '%s' to correct the problem. " +msgstr "dpkg 被中断，您必须手工运行 ‘%s’ 解决此问题。" + +#: apt-pkg/deb/debsystem.cc +msgid "Not locked" +msgstr "未锁定" + +#: apt-pkg/deb/dpkgpm.cc +#, c-format +msgid "Installing %s" +msgstr "正在安装 %s" + +#: apt-pkg/deb/dpkgpm.cc +#, c-format +msgid "Configuring %s" +msgstr "正在配置 %s" + +#: apt-pkg/deb/dpkgpm.cc +#, c-format +msgid "Removing %s" +msgstr "正在删除 %s" + +#: apt-pkg/deb/dpkgpm.cc +#, c-format +msgid "Completely removing %s" +msgstr "完全删除 %s" + +#: apt-pkg/deb/dpkgpm.cc +#, c-format +msgid "Noting disappearance of %s" +msgstr "注意到 %s 已经消失" + +#: apt-pkg/deb/dpkgpm.cc +#, c-format +msgid "Running post-installation trigger %s" +msgstr "执行安装后执行的触发器 %s" + +#: apt-pkg/deb/dpkgpm.cc +#, c-format +msgid "Installed %s" +msgstr "已安装 %s" + +#. FIXME: use a better string after freeze +#: apt-pkg/deb/dpkgpm.cc +#, c-format +msgid "Directory '%s' missing" +msgstr "目录 %s 缺失" + +#: apt-pkg/deb/dpkgpm.cc apt-pkg/edsp.cc +#, c-format +msgid "Could not open file '%s'" +msgstr "无法打开文件 %s" + +#: apt-pkg/deb/dpkgpm.cc +#, c-format +msgid "Preparing %s" +msgstr "正在准备 %s" + +#: apt-pkg/deb/dpkgpm.cc +#, c-format +msgid "Unpacking %s" +msgstr "正在解压缩 %s" + +#: apt-pkg/deb/dpkgpm.cc +#, c-format +msgid "Preparing to configure %s" +msgstr "正在准备配置 %s" + +#: apt-pkg/deb/dpkgpm.cc +#, c-format +msgid "Preparing for removal of %s" +msgstr "正在准备 %s 的删除操作" + +#: apt-pkg/deb/dpkgpm.cc +#, c-format +msgid "Removed %s" +msgstr "已删除 %s" + +#: apt-pkg/deb/dpkgpm.cc +#, c-format +msgid "Preparing to completely remove %s" +msgstr "正在准备完全删除 %s" + +#: apt-pkg/deb/dpkgpm.cc +#, c-format +msgid "Completely removed %s" +msgstr "完全删除了 %s" + +#: apt-pkg/deb/dpkgpm.cc +#, c-format +msgid "Can not write log (%s)" +msgstr "无法写入日志 (%s)" + +#: apt-pkg/deb/dpkgpm.cc +msgid "Is /dev/pts mounted?" +msgstr "/dev/pts 挂载了吗？" + +#: apt-pkg/deb/dpkgpm.cc +msgid "Operation was interrupted before it could finish" +msgstr "操作在完成之前被打断" + +#: apt-pkg/deb/dpkgpm.cc +msgid "No apport report written because MaxReports is reached already" +msgstr "由于已经达到 MaxReports 限制，没有写入 apport 报告。" + +#. check if its not a follow up error +#: apt-pkg/deb/dpkgpm.cc +msgid "dependency problems - leaving unconfigured" +msgstr "依赖问题 - 保持未配置" + +#: apt-pkg/deb/dpkgpm.cc +msgid "" +"No apport report written because the error message indicates its a followup " +"error from a previous failure." +msgstr "因为错误消息指示这是由于上一个问题导致的错误，没有写入 apport 报告。" + +#: apt-pkg/deb/dpkgpm.cc +msgid "" +"No apport report written because the error message indicates a disk full " +"error" +msgstr "因为错误消息指示这是由于磁盘已满，没有写入 apport 报告。" + +#: apt-pkg/deb/dpkgpm.cc +msgid "" +"No apport report written because the error message indicates a out of memory " +"error" +msgstr "因为错误消息指示这是由于内存不足，没有写入 apport 报告。" + +#: apt-pkg/deb/dpkgpm.cc +msgid "" +"No apport report written because the error message indicates an issue on the " +"local system" +msgstr "错误信息显示本地系统有一些问题，因此没有写入 apport 报告" + +#: apt-pkg/deb/dpkgpm.cc +msgid "" +"No apport report written because the error message indicates a dpkg I/O error" +msgstr "因为错误消息指示这是一个 dpkg I/O 错误，没有写入 apport 报告。" + +#: apt-pkg/depcache.cc +msgid "Building dependency tree" +msgstr "正在分析软件包的依赖关系树" + +#: apt-pkg/depcache.cc +msgid "Candidate versions" +msgstr "候选版本" + +#: apt-pkg/depcache.cc +msgid "Dependency generation" +msgstr "生成依赖关系" + +#: apt-pkg/depcache.cc +msgid "Reading state information" +msgstr "正在读取状态信息" + +#: apt-pkg/depcache.cc +#, c-format +msgid "Failed to open StateFile %s" +msgstr "无法打开状态文件 %s" + +#: apt-pkg/depcache.cc +#, c-format +msgid "Failed to write temporary StateFile %s" +msgstr "无法写入临时状态文件 %s" + +#: apt-pkg/edsp.cc +msgid "Send scenario to solver" +msgstr "向依赖解决器发送情景" + +#: apt-pkg/edsp.cc +msgid "Send request to solver" +msgstr "向依赖解决器发送请求" + +#: apt-pkg/edsp.cc +msgid "Prepare for receiving solution" +msgstr "准备接收依赖解决方案" + +#: apt-pkg/edsp.cc +msgid "External solver failed without a proper error message" +msgstr "外部依赖解决器出错，错误信息不恰当" + +#: apt-pkg/edsp.cc +msgid "Execute external solver" +msgstr "执行外部依赖解决器" + +#: apt-pkg/edsp.cc +msgid "Execute external planner" +msgstr "执行外部安装顺序规划器" + +#: apt-pkg/edsp.cc +msgid "Send request to planner" +msgstr "向安装顺序规划器发送请求" + +#: apt-pkg/edsp.cc +msgid "Send scenario to planner" +msgstr "向安装顺序规划器发送情景" + +#: apt-pkg/edsp.cc +msgid "External planner failed without a proper error message" +msgstr "外部安装顺序规划器出错，错误信息不恰当" + +#: apt-pkg/indexcopy.cc +#, c-format +msgid "Wrote %i records.\n" +msgstr "已写入 %i 条记录。\n" + +#: apt-pkg/indexcopy.cc +#, c-format +msgid "Wrote %i records with %i missing files.\n" +msgstr "已写入 %i 条记录，并有 %i 个文件缺失。\n" + +#: apt-pkg/indexcopy.cc +#, c-format +msgid "Wrote %i records with %i mismatched files\n" +msgstr "已写入 %i 条记录，并有 %i 个文件不匹配\n" + +#: apt-pkg/indexcopy.cc +#, c-format +msgid "Wrote %i records with %i missing files and %i mismatched files\n" +msgstr "已写入 %i 条记录，并有 %i 个缺失，以及 %i 个文件不匹配\n" + +#: apt-pkg/indexcopy.cc +#, c-format +msgid "Can't find authentication record for: %s" +msgstr "无法找到认证记录：%s" + +#: apt-pkg/indexcopy.cc +#, c-format +msgid "Hash mismatch for: %s" +msgstr "Hash 校验和不符：%s" + +#: apt-pkg/init.cc +#, c-format +msgid "Packaging system '%s' is not supported" +msgstr "不支持“%s”打包系统" + +#: apt-pkg/init.cc +msgid "Unable to determine a suitable packaging system type" +msgstr "无法确定适合的打包系统类型" + +#: apt-pkg/install-progress.cc +#, c-format +msgid "Progress: [%3i%%]" +msgstr "进度：[%3i%%]" + +#. send status information that we are about to fork dpkg +#: apt-pkg/install-progress.cc +msgid "Running dpkg" +msgstr "正在运行 dpkg" + +#: apt-pkg/packagemanager.cc +#, c-format +msgid "" +"Could not perform immediate configuration on '%s'. Please see man 5 apt.conf " +"under APT::Immediate-Configure for details. (%d)" +msgstr "" +"无法立即对 %s 进行配置。请查看 man 5 apt.conf 中的 APT::Immediate-Configure " +"(%d)" + +#: apt-pkg/packagemanager.cc +#, c-format +msgid "Could not configure '%s'. " +msgstr "无法配置 %s。" + +#: apt-pkg/packagemanager.cc +#, c-format +msgid "" +"This installation run will require temporarily removing the essential " +"package %s due to a Conflicts/Pre-Depends loop. This is often bad, but if " +"you really want to do it, activate the APT::Force-LoopBreak option." +msgstr "" +"由于这次安装存在着一个 Conflicts/Pre-Depends 循环，因而需要暂时删除一个必不可" +"少的软件包 %s。通常并不建议这样做，但是如果您确实希望如此，可以打开 APT::" +"Force-LoopBreak 选项。" + +#: apt-pkg/pkgcache.cc +msgid "Empty package cache" +msgstr "软件包缓存区是空的" + +#: apt-pkg/pkgcache.cc +msgid "The package cache file is corrupted" +msgstr "软件包缓存文件损坏了" + +#: apt-pkg/pkgcache.cc +msgid "The package cache file is an incompatible version" +msgstr "软件包缓存区文件的版本不兼容" + +#: apt-pkg/pkgcache.cc +#, c-format +msgid "This APT does not support the versioning system '%s'" +msgstr "本程序目前不支持“%s”版本系统" + +#: apt-pkg/pkgcache.cc +#, c-format +msgid "The package cache was built for different architectures: %s vs %s" +msgstr "软件包缓存是为其它架构的硬件构建的: %s vs %s" + +#: apt-pkg/pkgcache.cc +msgid "The package cache file is corrupted, it has the wrong hash" +msgstr "软件包缓存文件损坏，散列值错误" + +#: apt-pkg/pkgcache.cc +msgid "Depends" +msgstr "依赖" + +#: apt-pkg/pkgcache.cc +msgid "PreDepends" +msgstr "预依赖" + +#: apt-pkg/pkgcache.cc +msgid "Suggests" +msgstr "建议" + +#: apt-pkg/pkgcache.cc +msgid "Conflicts" +msgstr "冲突" + +#: apt-pkg/pkgcache.cc +msgid "Recommends" +msgstr "推荐" + +#: apt-pkg/pkgcache.cc +msgid "Replaces" +msgstr "替换" + +#: apt-pkg/pkgcache.cc +msgid "Breaks" +msgstr "破坏" + +#: apt-pkg/pkgcache.cc +msgid "Enhances" +msgstr "增强" + +#: apt-pkg/pkgcache.cc +msgid "Obsoletes" +msgstr "废弃" + +#: apt-pkg/pkgcache.cc +msgid "important" +msgstr "重要" + +#: apt-pkg/pkgcache.cc +msgid "required" +msgstr "必需" + +#: apt-pkg/pkgcache.cc +msgid "standard" +msgstr "标准" + +#: apt-pkg/pkgcache.cc +msgid "extra" +msgstr "额外" + +#: apt-pkg/pkgcache.cc +msgid "optional" +msgstr "可选" + +#: apt-pkg/pkgcachegen.cc +msgid "Cache has an incompatible versioning system" +msgstr "软件包暂存区使用的是不兼容的版本控制系统" + +#. TRANSLATOR: The first placeholder is a package name, +#. the other two should be copied verbatim as they include debug info +#: apt-pkg/pkgcachegen.cc +#, c-format +msgid "Error occurred while processing %s (%s%d)" +msgstr "处理 %s (%s%d) 时出错" + +#: apt-pkg/pkgcachegen.cc +msgid "Wow, you exceeded the number of package names this APT is capable of." +msgstr "哇，软件包数量超出了本 APT 的处理能力。" + +#: apt-pkg/pkgcachegen.cc +msgid "Wow, you exceeded the number of versions this APT is capable of." +msgstr "哇，软件包版本数量超出了本 APT 的处理能力。" + +#: apt-pkg/pkgcachegen.cc +msgid "Wow, you exceeded the number of descriptions this APT is capable of." +msgstr "哇，软件包说明数量超出了本 APT 的处理能力。" + +#: apt-pkg/pkgcachegen.cc +msgid "Wow, you exceeded the number of dependencies this APT is capable of." +msgstr "哇，依赖关系数量超出了本 APT 的处理能力。" + +#: apt-pkg/pkgcachegen.cc +msgid "Reading package lists" +msgstr "正在读取软件包列表" + +#: apt-pkg/pkgcachegen.cc +msgid "IO Error saving source cache" +msgstr "无法读取或写入软件源缓存" + +#: apt-pkg/pkgrecords.cc +#, c-format +msgid "Index file type '%s' is not supported" +msgstr "不支持索引文件类型“%s”" + +#: apt-pkg/policy.cc +#, c-format +msgid "" +"The value '%s' is invalid for APT::Default-Release as such a release is not " +"available in the sources" +msgstr "" +"'%s' 这个值对 APT::Default-Release 是无效的，因为在源里找不到这样的发行" + +#: apt-pkg/policy.cc +#, c-format +msgid "Invalid record in the preferences file %s, no Package header" +msgstr "首选项文件 %s 中发现有无效的记录，无 Package 字段头" + +#: apt-pkg/policy.cc +#, c-format +msgid "Did not understand pin type %s" +msgstr "无法识别锁定的类型 %s" + +#: apt-pkg/policy.cc +#, c-format +msgid "%s: Value %s is outside the range of valid pin priorities (%d to %d)" +msgstr "%s: 值 %s 超出锁定优先级有效范围 (%d 到 %d)" + +#: apt-pkg/policy.cc +msgid "No priority (or zero) specified for pin" +msgstr "没有为版本锁定指定优先级(或为零)" + +#. TRANSLATOR: %u is a line number, the first %s is a filename of a file with the extension "second %s" and the third %s is a unique identifier for bugreports +#: apt-pkg/sourcelist.cc +#, c-format +msgid "Malformed entry %u in %s file %s (%s)" +msgstr "文件 %2$s 第 %1$u 行的记录格式有误 %3$s (%4$s)" + +#: apt-pkg/sourcelist.cc +#, c-format +msgid "Opening %s" +msgstr "正在打开 %s" + +#: apt-pkg/sourcelist.cc +#, c-format +msgid "Malformed line %u in source list %s (type)" +msgstr "在源列表 %2$s 中第 %1$u 行有误 (类型)" + +#: apt-pkg/sourcelist.cc +#, c-format +msgid "Type '%s' is not known on line %u in source list %s" +msgstr "软件源列表 %3$s 第 %2$u 行中的类别 “%1$s” 无法识别" + +#: apt-pkg/sourcelist.cc +#, c-format +msgid "Malformed stanza %u in source list %s (type)" +msgstr "软件源列表 %2$s 中第 %1$u 行的小节格式有误 (类型)" + +#: apt-pkg/sourcelist.cc +#, c-format +msgid "Type '%s' is not known on stanza %u in source list %s" +msgstr "软件源列表 %3$s 第 %2$u 小节的类别 “%1$s” 无法识别" + +#: apt-pkg/sourcelist.cc +#, c-format +msgid "Unsupported file %s given on commandline" +msgstr "命令行中有不支持的文件 %s" + +#: apt-pkg/srcrecords.cc +msgid "You must put some 'source' URIs in your sources.list" +msgstr "您必须在 sources.list 中指定代码源(deb-src) URI" + +#: apt-pkg/tagfile.cc +#, c-format +msgid "Cannot convert %s to integer: out of range" +msgstr "无法将 %s 转换为整数：超出范围" + +#: apt-pkg/update.cc apt-private/private-download.cc +#, c-format +msgid "Failed to fetch %s %s" +msgstr "无法下载 %s %s" + +#: apt-pkg/update.cc +msgid "" +"Some index files failed to download. They have been ignored, or old ones " +"used instead." +msgstr "部分索引文件下载失败。如果忽略它们，那将转而使用旧的索引文件。" + +#: apt-pkg/upgrade.cc +msgid "Calculating upgrade" +msgstr "正在计算更新" + +#. TRANSLATOR: Very short word to be displayed before unchanged files in 'apt-get update' +#: apt-private/acqprogress.cc +#, c-format +msgid "Hit:%lu %s" +msgstr "命中:%lu %s" + +#. TRANSLATOR: Very short word to be displayed for files processed in 'apt-get update' +#. Potentially replaced later by "Hit:", "Ign:" or "Err:" if something (bad) happens +#: apt-private/acqprogress.cc +#, c-format +msgid "Get:%lu %s" +msgstr "获取:%lu %s" + +#. TRANSLATOR: Very short word to be displayed for files in 'apt-get update' +#. which failed to download, but the error is ignored (compare "Err:") +#: apt-private/acqprogress.cc +#, c-format +msgid "Ign:%lu %s" +msgstr "忽略:%lu %s" + +#. TRANSLATOR: Very short word to be displayed for files in 'apt-get update' +#. which failed to download and the error is critical (compare "Ign:") +#: apt-private/acqprogress.cc +#, c-format +msgid "Err:%lu %s" +msgstr "错误:%lu %s" + +#: apt-private/acqprogress.cc +#, c-format +msgid "Fetched %sB in %s (%sB/s)\n" +msgstr "已下载 %sB，耗时 %s (%sB/s)\n" + +#: apt-private/acqprogress.cc +msgid " [Working]" +msgstr " [执行中]" + +#: apt-private/acqprogress.cc +#, c-format +msgid "" +"Media change: please insert the disc labeled\n" +" '%s'\n" +"in the drive '%s' and press [Enter]\n" +msgstr "" +"更换介质：请把标有\n" +" “%s”\n" +"的盘片插入驱动器“%s”再按「回车」键\n" + +#: apt-private/private-cachefile.cc +msgid "Correcting dependencies..." +msgstr "正在修复依赖关系..." + +#: apt-private/private-cachefile.cc +msgid " failed." +msgstr " 失败。" + +#: apt-private/private-cachefile.cc +msgid "Unable to correct dependencies" +msgstr "无法修复依赖关系" + +#: apt-private/private-cachefile.cc +msgid "Unable to minimize the upgrade set" +msgstr "无法最小化待升级软件包集合" + +#: apt-private/private-cachefile.cc +msgid " Done" +msgstr " 完成" + +#: apt-private/private-cachefile.cc +msgid "You might want to run 'apt-get -f install' to correct these." +msgstr "您也许需要运行“apt-get -f install”来修正上面的错误。" + +#: apt-private/private-cachefile.cc +msgid "Unmet dependencies. Try using -f." +msgstr "不能满足依赖关系。不妨试一下 -f 选项。" + +#: apt-private/private-cacheset.cc apt-private/private-search.cc +msgid "Sorting" +msgstr "正在排序" + +#: apt-private/private-cacheset.cc +#, c-format +msgid "Note, selecting '%s' for task '%s'\n" +msgstr "注意，根据任务 '%2$s' 选中了 '%1$s'\n" + +#: apt-private/private-cacheset.cc +#, c-format +msgid "Note, selecting '%s' for glob '%s'\n" +msgstr "注意，根据Glob '%2$s' 选中了 '%1$s'\n" + +#: apt-private/private-cacheset.cc +#, c-format +msgid "Note, selecting '%s' for regex '%s'\n" +msgstr "注意，根据正则表达式 '%2$s' 选中了 '%1$s'\n" + +#: apt-private/private-cacheset.cc +#, c-format +msgid "Package %s is a virtual package provided by:\n" +msgstr "虚拟软件包 %s 由下面的软件包提供：\n" + +#: apt-private/private-cacheset.cc +msgid " [Installed]" +msgstr "[已安装]" + +#: apt-private/private-cacheset.cc +msgid " [Not candidate version]" +msgstr " [无候选]" + +#: apt-private/private-cacheset.cc +msgid "You should explicitly select one to install." +msgstr "请您明确地选择安装其中一个。" + +#: apt-private/private-cacheset.cc +#, c-format +msgid "" +"Package %s is not available, but is referred to by another package.\n" +"This may mean that the package is missing, has been obsoleted, or\n" +"is only available from another source\n" +msgstr "" +"没有可用的软件包 %s，但是它被其它的软件包引用了。\n" +"这可能意味着这个缺失的软件包可能已被废弃，\n" +"或者只能在其他发布源中找到\n" + +#: apt-private/private-cacheset.cc +msgid "However the following packages replace it:" +msgstr "然而下列软件包会取代它：" + +#: apt-private/private-cacheset.cc +#, c-format +msgid "Package '%s' has no installation candidate" +msgstr "软件包 %s 没有可安装候选" + +#: apt-private/private-cacheset.cc +#, c-format +msgid "Virtual packages like '%s' can't be removed\n" +msgstr "类似 '%s' 的虚拟软件包「不」可以卸载\n" + +#. TRANSLATORS: Note, this is not an interactive question +#: apt-private/private-cacheset.cc apt-private/private-install.cc +#, c-format +msgid "Package '%s' is not installed, so not removed. Did you mean '%s'?\n" +msgstr "软件包 %s 未安装，所以不会被卸载。您的意思是 ‘%s’ 吗？\n" + +#: apt-private/private-cacheset.cc apt-private/private-install.cc +#, c-format +msgid "Package '%s' is not installed, so not removed\n" +msgstr "软件包 %s 未安装，所以不会被卸载\n" + +#: apt-private/private-cacheset.cc +#, c-format +msgid "Note, selecting '%s' instead of '%s'\n" +msgstr "注意，选中 '%s' 而非 '%s'\n" + +#: apt-private/private-cmndline.cc +msgid "Most used commands:" +msgstr "常用命令：" + +#: apt-private/private-cmndline.cc +#, c-format +msgid "See %s for more information about the available commands." +msgstr "参见 %s 以获取更多关于可用命令的信息。" + +#: apt-private/private-cmndline.cc +msgid "" +"Configuration options and syntax is detailed in apt.conf(5).\n" +"Information about how to configure sources can be found in sources.list(5).\n" +"Package and version choices can be expressed via apt_preferences(5).\n" +"Security details are available in apt-secure(8).\n" +msgstr "" +"程序配置选项及语法都已经在 apt.conf(5) 中阐明。\n" +"欲知如何配置软件源，请参阅 sources.list(5)。\n" +"软件包及其版本偏好可以通过 apt_preferences(5) 来设置。\n" +"关于安全方面的细节可以参考 apt-secure(8).\n" + +#: apt-private/private-cmndline.cc +msgid "This APT has Super Cow Powers." +msgstr "本 APT 具有超级牛力。" + +#: apt-private/private-cmndline.cc +msgid "This APT helper has Super Meep Powers." +msgstr "本 APT 助手具有超级喵力。" + +#: apt-private/private-depends.cc apt-private/private-show.cc +#: cmdline/apt-mark.cc +msgid "No packages found" +msgstr "没有发现匹配的软件包" + +#: apt-private/private-download.cc +msgid "WARNING: The following packages cannot be authenticated!" +msgstr "【警告】：下列软件包不能通过认证！" + +#: apt-private/private-download.cc +msgid "Authentication warning overridden.\n" +msgstr "已忽略认证警告。\n" + +#: apt-private/private-download.cc +msgid "Some packages could not be authenticated" +msgstr "有些软件包不能通过验证" + +#: apt-private/private-download.cc +msgid "Install these packages without verification?" +msgstr "没有验证的情况下就安装这些软件包吗？" + +#: apt-private/private-download.cc apt-private/private-install.cc +msgid "" +"--force-yes is deprecated, use one of the options starting with --allow " +"instead." +msgstr "--force-yes 已经被废弃，请使用以 --allow 开头的选项来代替。" + +#: apt-private/private-download.cc +msgid "" +"There were unauthenticated packages and -y was used without --allow-" +"unauthenticated" +msgstr "" +"存在未认证的软件包同时使用了 -y 选项，然而未搭配 --allow-unauthenticated" + +#: apt-private/private-download.cc +#, c-format +msgid "Couldn't determine free space in %s" +msgstr "无法获知您在 %s 上的可用空间" + +#: apt-private/private-download.cc +#, c-format +msgid "You don't have enough free space in %s." +msgstr "您在 %s 上没有足够的可用空间。" + +#: apt-private/private-download.cc +msgid "Unable to lock the download directory" +msgstr "无法锁定下载目录" + +#: apt-private/private-install.cc +msgid "" +"Some packages could not be installed. This may mean that you have\n" +"requested an impossible situation or if you are using the unstable\n" +"distribution that some required packages have not yet been created\n" +"or been moved out of Incoming." +msgstr "" +"有一些软件包无法被安装。如果您用的是 unstable 发行版，这也许是\n" +"因为系统无法达到您要求的状态造成的。该版本中可能会有一些您需要的软件\n" +"包尚未被创建或是它们已被从新到(Incoming)目录移出。" + +#. +#. if (Packages == 1) +#. { +#. c1out << std::endl; +#. c1out << +#. _("Since you only requested a single operation it is extremely likely that\n" +#. "the package is simply not installable and a bug report against\n" +#. "that package should be filed.") << std::endl; +#. } +#. +#: apt-private/private-install.cc +msgid "The following information may help to resolve the situation:" +msgstr "下列信息可能会对解决问题有所帮助：" + +#: apt-private/private-install.cc +msgid "Broken packages" +msgstr "破损的软件包" + +#: apt-private/private-install.cc +msgid "Internal error, InstallPackages was called with broken packages!" +msgstr "内部错误，InstallPackages 被用在了损坏的软件包上！" + +#: apt-private/private-install.cc +msgid "Packages need to be removed but remove is disabled." +msgstr "有软件包需要被卸载，但是卸载被设置为禁止。" + +#: apt-private/private-install.cc +msgid "" +"Essential packages were removed and -y was used without --allow-remove-" +"essential." +msgstr "" +"关键软件包被移除同时使用了 -y 选项，但是没有搭配 --allow-remove-essential。" + +#: apt-private/private-install.cc +msgid "Packages were downgraded and -y was used without --allow-downgrades." +msgstr "降级软件包同时使用了 -y 选项，但是没有用 --allow-downgrades." + +#: apt-private/private-install.cc +msgid "" +"Held packages were changed and -y was used without --allow-change-held-" +"packages." +msgstr "" +"在更改保留软件包的同时使用了 -y 选项，但没有搭配 --allow-change-held-" +"packages." + +#: apt-private/private-install.cc +msgid "Internal error, Ordering didn't finish" +msgstr "内部错误，排序未完成" + +#: apt-private/private-install.cc +msgid "How odd... The sizes didn't match, email apt@packages.debian.org" +msgstr "怪了……文件大小不符，请发邮件给 apt@packages.debian.org 吧" + +#. TRANSLATOR: The required space between number and unit is already included +#. in the replacement strings, so %sB will be correctly translate in e.g. 1,5 MB +#: apt-private/private-install.cc +#, c-format +msgid "Need to get %sB/%sB of archives.\n" +msgstr "需要下载 %sB/%sB 的归档。\n" + +#. TRANSLATOR: The required space between number and unit is already included +#. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB +#: apt-private/private-install.cc +#, c-format +msgid "Need to get %sB of archives.\n" +msgstr "需要下载 %sB 的归档。\n" + +#. TRANSLATOR: The required space between number and unit is already included +#. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB +#: apt-private/private-install.cc +#, c-format +msgid "After this operation, %sB of additional disk space will be used.\n" +msgstr "解压缩后会消耗 %sB 的额外空间。\n" + +#. TRANSLATOR: The required space between number and unit is already included +#. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB +#: apt-private/private-install.cc +#, c-format +msgid "After this operation, %sB disk space will be freed.\n" +msgstr "解压缩后将会空出 %sB 的空间。\n" + +#: apt-private/private-install.cc +msgid "Trivial Only specified but this is not a trivial operation." +msgstr "虽然您指定了仅执行常规操作，但这并不是常规操作。" + +#. TRANSLATOR: This string needs to be typed by the user as a confirmation, so be +#. careful with hard to type or special characters (like non-breaking spaces) +#: apt-private/private-install.cc +msgid "Yes, do as I say!" +msgstr "是，按我说的做！" + +#: apt-private/private-install.cc +#, c-format +msgid "" +"You are about to do something potentially harmful.\n" +"To continue type in the phrase '%s'\n" +" ?] " +msgstr "" +"您的操作有潜在的危害性。\n" +"若要继续，请输入下面的短句“%s”\n" +" ?] " + +#: apt-private/private-install.cc +msgid "Abort." +msgstr "中止。" + +#: apt-private/private-install.cc +msgid "Do you want to continue?" +msgstr "您希望继续执行吗？" + +#: apt-private/private-install.cc +msgid "Some files failed to download" +msgstr "有一些文件下载失败" + +#: apt-private/private-install.cc apt-private/private-source.cc +msgid "Download complete and in download only mode" +msgstr "于“仅下载”模式中下载完毕" + +#: apt-private/private-install.cc +msgid "" +"Unable to fetch some archives, maybe run apt-get update or try with --fix-" +"missing?" +msgstr "" +"有几个软件包无法下载，要不运行 apt-get update 或者加上 --fix-missing 的选项再" +"试试？" + +#: apt-private/private-install.cc +msgid "--fix-missing and media swapping is not currently supported" +msgstr "目前不支持 --fix-missing 和介质交换" + +#: apt-private/private-install.cc +msgid "Unable to correct missing packages." +msgstr "无法修复缺失的软件包。" + +#: apt-private/private-install.cc +msgid "Aborting install." +msgstr "中止安装。" + +#: apt-private/private-install.cc +msgid "" +"The following package disappeared from your system as\n" +"all files have been overwritten by other packages:" +msgid_plural "" +"The following packages disappeared from your system as\n" +"all files have been overwritten by other packages:" +msgstr[0] "以下软件包因为文件已被其他软件包覆盖而消失：" + +#: apt-private/private-install.cc +msgid "Note: This is done automatically and on purpose by dpkg." +msgstr "注意：这是自动被 dpkg 有意完成的。" + +#: apt-private/private-install.cc +msgid "We are not supposed to delete stuff, can't start AutoRemover" +msgstr "我们不应该进行删除，无法启动自动删除器" + +#: apt-private/private-install.cc +msgid "" +"Hmm, seems like the AutoRemover destroyed something which really\n" +"shouldn't happen. Please file a bug report against apt." +msgstr "似乎自动卸载工具损坏了一些软件，这不应该发生。请向 apt 提交错误报告。" + +#: apt-private/private-install.cc +msgid "Internal Error, AutoRemover broke stuff" +msgstr "内部错误，自动卸载工具坏事了" + +#: apt-private/private-install.cc +msgid "" +"The following package was automatically installed and is no longer required:" +msgid_plural "" +"The following packages were automatically installed and are no longer " +"required:" +msgstr[0] "下列软件包是自动安装的并且现在不需要了：" + +#: apt-private/private-install.cc +#, c-format +msgid "%lu package was automatically installed and is no longer required.\n" +msgid_plural "" +"%lu packages were automatically installed and are no longer required.\n" +msgstr[0] "%lu 个自动安装的的软件包现在已不再需要了。\n" + +#: apt-private/private-install.cc +#, c-format +msgid "Use '%s' to remove it." +msgid_plural "Use '%s' to remove them." +msgstr[0] "使用'%s'来卸载它(它们)。" + +#: apt-private/private-install.cc +msgid "You might want to run 'apt-get -f install' to correct these:" +msgstr "您可能需要运行“apt-get -f install”来纠正下列错误：" + +#: apt-private/private-install.cc +msgid "" +"Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a " +"solution)." +msgstr "" +"有未能满足的依赖关系。请尝试不指明软件包的名字来运行“apt-get -f install”(也可" +"以指定一个解决办法)。" + +#: apt-private/private-install.cc +msgid "The following additional packages will be installed:" +msgstr "将会同时安装下列软件：" + +#: apt-private/private-install.cc +msgid "Suggested packages:" +msgstr "建议安装：" + +#: apt-private/private-install.cc +msgid "Recommended packages:" +msgstr "推荐安装：" + +#: apt-private/private-install.cc +#, c-format +msgid "Skipping %s, it is already installed and upgrade is not set.\n" +msgstr "忽略了 %s，它已经被安装而且没有指定要升级。\n" + +#: apt-private/private-install.cc +#, c-format +msgid "Skipping %s, it is not installed and only upgrades are requested.\n" +msgstr "忽略了 %s，它已经被安装而且仅请求了升级。\n" + +#: apt-private/private-install.cc +#, c-format +msgid "Reinstallation of %s is not possible, it cannot be downloaded.\n" +msgstr "不能重新安装 %s，因为无法下载它。\n" + +#. TRANSLATORS: First string is package name, second is version +#: apt-private/private-install.cc +#, c-format +msgid "%s is already the newest version (%s).\n" +msgstr "%s 已经是最新版 (%s)。\n" + +#: apt-private/private-install.cc cmdline/apt-get.cc cmdline/apt-mark.cc +#, c-format +msgid "%s set to manually installed.\n" +msgstr "%s 已设置为手动安装。\n" + +#: apt-private/private-install.cc +#, c-format +msgid "Selected version '%s' (%s) for '%s'\n" +msgstr "为 %3$s 选定了版本 %1$s (%2$s)\n" + +#: apt-private/private-install.cc +#, c-format +msgid "Selected version '%s' (%s) for '%s' because of '%s'\n" +msgstr "由于 %4$s，为 %3$s 选定了版本 %1$s (%2$s)\n" + +#: apt-private/private-list.cc +msgid "Listing" +msgstr "正在列表" + +#: apt-private/private-list.cc +#, c-format +msgid "There is %i additional version. Please use the '-a' switch to see it" +msgid_plural "" +"There are %i additional versions. Please use the '-a' switch to see them." +msgstr[0] "还有 %i 个版本。请使用 -a 选项来查看它(他们)。" + +#. TRANSLATORS: placeholder is a binary name like apt or apt-get +#: apt-private/private-main.cc +#, c-format +msgid "" +"NOTE: This is only a simulation!\n" +" %s needs root privileges for real execution.\n" +" Keep also in mind that locking is deactivated,\n" +" so don't depend on the relevance to the real current situation!\n" +msgstr "" +"注意：这只是模拟！\n" +" %s 需要 root 特权进行实际的执行。\n" +" 同时请记住此时并未锁定，所以请勿完全相信当前的情况！\n" + +#: apt-private/private-output.cc apt-private/private-show.cc +msgid "unknown" +msgstr "未知" + +#: apt-private/private-output.cc +#, c-format +msgid "[installed,upgradable to: %s]" +msgstr "[已安装，可升级至：%s]" + +#: apt-private/private-output.cc +msgid "[installed,local]" +msgstr "[已安装，本地]" + +#: apt-private/private-output.cc +msgid "[installed,auto-removable]" +msgstr "[已安装，可自动卸载]" + +#: apt-private/private-output.cc +msgid "[installed,automatic]" +msgstr "[已安装，自动]" + +#: apt-private/private-output.cc +msgid "[installed]" +msgstr "[已安装]" + +#: apt-private/private-output.cc +#, c-format +msgid "[upgradable from: %s]" +msgstr "[可从该版本升级：%s]" + +#: apt-private/private-output.cc +msgid "[residual-config]" +msgstr "[配置文件残留]" + +#: apt-private/private-output.cc +#, c-format +msgid "but %s is installed" +msgstr "但是 %s 已经安装" + +#: apt-private/private-output.cc +#, c-format +msgid "but %s is to be installed" +msgstr "但是 %s 正要被安装" + +#: apt-private/private-output.cc +msgid "but it is not installable" +msgstr "但无法安装它" + +#: apt-private/private-output.cc +msgid "but it is a virtual package" +msgstr "但是它是虚拟软件包" + +#: apt-private/private-output.cc +msgid "but it is not going to be installed" +msgstr "但是它将不会被安装" + +#: apt-private/private-output.cc +msgid "but it is not installed" +msgstr "但是它还没有被安装" + +#: apt-private/private-output.cc +msgid " or" +msgstr " 或" + +#: apt-private/private-output.cc +msgid "The following packages have unmet dependencies:" +msgstr "下列软件包有未满足的依赖关系：" + +#: apt-private/private-output.cc +msgid "The following NEW packages will be installed:" +msgstr "下列【新】软件包将被安装：" + +#: apt-private/private-output.cc +msgid "The following packages will be REMOVED:" +msgstr "下列软件包将被【卸载】：" + +#: apt-private/private-output.cc +msgid "The following packages have been kept back:" +msgstr "下列软件包的版本将保持不变：" + +#: apt-private/private-output.cc +msgid "The following packages will be upgraded:" +msgstr "下列软件包将被升级：" + +#: apt-private/private-output.cc +msgid "The following packages will be DOWNGRADED:" +msgstr "下列软件包将被【降级】：" + +#: apt-private/private-output.cc +msgid "The following held packages will be changed:" +msgstr "下列被要求保持版本不变的软件包将被改变：" + +#: apt-private/private-output.cc +#, c-format +msgid "%s (due to %s)" +msgstr "%s (是由于 %s)" + +#: apt-private/private-output.cc +msgid "" +"WARNING: The following essential packages will be removed.\n" +"This should NOT be done unless you know exactly what you are doing!" +msgstr "" +"【警告】：下列基础软件包将被卸载。\n" +"请勿尝试，除非您确实知道您在做什么！" + +#: apt-private/private-output.cc +#, c-format +msgid "%lu upgraded, %lu newly installed, " +msgstr "升级了 %lu 个软件包，新安装了 %lu 个软件包，" + +#: apt-private/private-output.cc +#, c-format +msgid "%lu reinstalled, " +msgstr "重新安装了 %lu 个软件包，" + +#: apt-private/private-output.cc +#, c-format +msgid "%lu downgraded, " +msgstr "降级了 %lu 个软件包，" + +#: apt-private/private-output.cc +#, c-format +msgid "%lu to remove and %lu not upgraded.\n" +msgstr "要卸载 %lu 个软件包，有 %lu 个软件包未被升级。\n" + +#: apt-private/private-output.cc +#, c-format +msgid "%lu not fully installed or removed.\n" +msgstr "有 %lu 个软件包没有被完全安装或卸载。\n" + +#. TRANSLATOR: Yes/No question help-text: defaulting to Y[es] +#. e.g. "Do you want to continue? [Y/n] " +#. The user has to answer with an input matching the +#. YESEXPR/NOEXPR defined in your l10n. +#: apt-private/private-output.cc +msgid "[Y/n]" +msgstr "[Y/n]" + +#. TRANSLATOR: Yes/No question help-text: defaulting to N[o] +#. e.g. "Should this file be removed? [y/N] " +#. The user has to answer with an input matching the +#. YESEXPR/NOEXPR defined in your l10n. +#: apt-private/private-output.cc +msgid "[y/N]" +msgstr "[y/N]" + +#. TRANSLATOR: "Yes" answer printed for a yes/no question if --assume-yes is set +#: apt-private/private-output.cc +msgid "Y" +msgstr "Y" + +#. TRANSLATOR: "No" answer printed for a yes/no question if --assume-no is set +#: apt-private/private-output.cc +msgid "N" +msgstr "N" + +#: apt-private/private-search.cc +msgid "You must give at least one search pattern" +msgstr "您必须明确地给出至少一个表达式" + +#: apt-private/private-search.cc +msgid "Full Text Search" +msgstr "全文搜索" + +#: apt-private/private-show.cc cmdline/apt-cache.cc +#, c-format +msgid "Package file %s is out of sync." +msgstr "软件包文件 %s 尚未同步。" + +#: apt-private/private-show.cc +#, c-format +msgid "There is %i additional record. Please use the '-a' switch to see it" +msgid_plural "" +"There are %i additional records. Please use the '-a' switch to see them." +msgstr[0] "有 %i 条附加记录。请加上 ‘-a’ 参数来查看它们" + +#: apt-private/private-show.cc +msgid "not a real package (virtual)" +msgstr "不是一个实包(虚包)" + +#: apt-private/private-show.cc +msgid "Package files:" +msgstr "软件包文件：" + +#: apt-private/private-show.cc +msgid "Cache is out of sync, can't x-ref a package file" +msgstr "缓存尚未同步，无法交差引证(x-ref)一个软件包文件" + +#. Show any packages have explicit pins +#: apt-private/private-show.cc +msgid "Pinned packages:" +msgstr "被锁定的软件包：" + +#. Print the package name and the version we are forcing to +#: apt-private/private-show.cc +#, c-format +msgid "%s -> %s with priority %d\n" +msgstr "%s -> %s ，其优先级为 %d\n" + +#: apt-private/private-show.cc +msgid " Installed: " +msgstr " 已安装：" + +#: apt-private/private-show.cc +msgid " Candidate: " +msgstr " 候选：" + +#: apt-private/private-show.cc +msgid "(none)" +msgstr "(无)" + +#. Show the priority tables +#: apt-private/private-show.cc +msgid " Version table:" +msgstr " 版本列表：" + +#: apt-private/private-source.cc +#, c-format +msgid "Can not find a package for architecture '%s'" +msgstr "找不到‘%s’体系结构下的软件包" + +#: apt-private/private-source.cc +#, c-format +msgid "Can not find a package '%s' with version '%s'" +msgstr "找不到软件包‘%s’的‘%s’版本" + +#: apt-private/private-source.cc +#, c-format +msgid "Can not find a package '%s' with release '%s'" +msgstr "找不到软件包‘%s’的‘%s’发行" + +#: apt-private/private-source.cc +#, c-format +msgid "Picking '%s' as source package instead of '%s'\n" +msgstr "选择 %s 作为源代码包而非 %s\n" + +#: apt-private/private-source.cc +#, c-format +msgid "Can not find version '%s' of package '%s'" +msgstr "找不到 %2$s 软件包的 %1$s 版本" + +#: apt-private/private-source.cc +msgid "Must specify at least one package to fetch source for" +msgstr "要下载源代码，必须指定至少一个对应的软件包" + +#: apt-private/private-source.cc +#, c-format +msgid "Unable to find a source package for %s" +msgstr "无法找到与 %s 对应的源代码包" + +#: apt-private/private-source.cc +#, c-format +msgid "" +"NOTICE: '%s' packaging is maintained in the '%s' version control system at:\n" +"%s\n" +msgstr "" +"提示：%s 的打包工作被维护于以下位置的 %s 版本控制系统中：\n" +"%s\n" + +#: apt-private/private-source.cc +#, c-format +msgid "" +"Please use:\n" +"%s\n" +"to retrieve the latest (possibly unreleased) updates to the package.\n" +msgstr "" +"请使用：\n" +"%s\n" +"获得该软件包的最近更新(可能尚未正式发布)。\n" + +#: apt-private/private-source.cc +#, c-format +msgid "Skipping already downloaded file '%s'\n" +msgstr "忽略已下载的文件“%s”\n" + +#. TRANSLATOR: The required space between number and unit is already included +#. in the replacement strings, so %sB will be correctly translate in e.g. 1,5 MB +#: apt-private/private-source.cc +#, c-format +msgid "Need to get %sB/%sB of source archives.\n" +msgstr "需要下载 %sB/%sB 的源代码包。\n" + +#. TRANSLATOR: The required space between number and unit is already included +#. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB +#: apt-private/private-source.cc +#, c-format +msgid "Need to get %sB of source archives.\n" +msgstr "需要下载 %sB 的源代码包。\n" + +#: apt-private/private-source.cc +#, c-format +msgid "Fetch source %s\n" +msgstr "下载源代码 %s\n" + +#: apt-private/private-source.cc +msgid "Failed to fetch some archives." +msgstr "有一些包文件无法下载。" + +#: apt-private/private-source.cc +#, c-format +msgid "Skipping unpack of already unpacked source in %s\n" +msgstr "忽略已经被解包到 %s 目录的源代码包\n" + +#: apt-private/private-source.cc +#, c-format +msgid "Unpack command '%s' failed.\n" +msgstr "运行解包的命令“%s”出错。\n" + +#: apt-private/private-source.cc +#, c-format +msgid "Check if the 'dpkg-dev' package is installed.\n" +msgstr "请检查是否安装了“dpkg-dev”软件包。\n" + +#: apt-private/private-source.cc +#, c-format +msgid "Build command '%s' failed.\n" +msgstr "执行构造软件包命令“%s”失败。\n" + +#: apt-private/private-source.cc +#, c-format +msgid "Unable to get build-dependency information for %s" +msgstr "无法获得 %s 的构建依赖关系信息" + +#: apt-private/private-source.cc +#, c-format +msgid "%s has no build depends.\n" +msgstr " %s 没有构建依赖关系信息。\n" + +#: apt-private/private-source.cc +msgid "Must specify at least one package to check builddeps for" +msgstr "要检查生成软件包的构建依赖关系，必须指定至少一个软件包" + +#: apt-private/private-source.cc +#, c-format +msgid "" +"No architecture information available for %s. See apt.conf(5) APT::" +"Architectures for setup" +msgstr "" +"找不到关于 %s 的有效体系结构信息。请参见 apt.conf(5) APT::Architectures for " +"setup" + +#: apt-private/private-source.cc +#, c-format +msgid "Note, using directory '%s' to get the build dependencies\n" +msgstr "注意，正使用 '%s' 目录下载编译依赖\n" + +#: apt-private/private-source.cc +#, c-format +msgid "Note, using file '%s' to get the build dependencies\n" +msgstr "注意，正使用 '%s' 文件来获取编译依赖\n" + +#: apt-private/private-source.cc +msgid "Failed to process build dependencies" +msgstr "无法处理构建依赖关系" + +#: apt-private/private-sources.cc +#, c-format +msgid "Failed to parse %s. Edit again? " +msgstr "解析 %s 失败。请重新编辑之后再试。" + +#: apt-private/private-sources.cc +#, c-format +msgid "Your '%s' file changed, please run 'apt-get update'." +msgstr "您的 %s 文件有过改动，请执行 ‘apt-get update’。" + +#: apt-private/private-unmet.cc +#, c-format +msgid "Package %s version %s has an unmet dep:\n" +msgstr "版本为 %2$s 的软件包 %1$s 有未满足的依赖关系：\n" + +#: apt-private/private-update.cc +msgid "The update command takes no arguments" +msgstr " update 命令不需要参数" + +#: apt-private/private-update.cc +#, c-format +msgid "%i package can be upgraded. Run 'apt list --upgradable' to see it.\n" +msgid_plural "" +"%i packages can be upgraded. Run 'apt list --upgradable' to see them.\n" +msgstr[0] "" +"有 %i 个软件包可以升级。请执行 ‘apt list --upgradable’ 来查看它们。\n" + +#: apt-private/private-update.cc +msgid "All packages are up to date." +msgstr "所有软件包均为最新。" + +#: cmdline/apt-cache.cc +msgid "apt-cache stats does not take any arguments" +msgstr "apt-cache stats 命令不需要参数" + +#: cmdline/apt-cache.cc +msgid "Total package names: " +msgstr "软件包名称总数：" + +#: cmdline/apt-cache.cc +msgid "Total package structures: " +msgstr "全部软件包结构：" + +#: cmdline/apt-cache.cc +msgid " Normal packages: " +msgstr " 普通软件包：" + +#: cmdline/apt-cache.cc +msgid " Pure virtual packages: " +msgstr " 纯虚拟软件包：" + +#: cmdline/apt-cache.cc +msgid " Single virtual packages: " +msgstr " 单虚拟软件包：" + +#: cmdline/apt-cache.cc +msgid " Mixed virtual packages: " +msgstr " 混合虚拟软件包：" + +#: cmdline/apt-cache.cc +msgid " Missing: " +msgstr " 缺失：" + +#: cmdline/apt-cache.cc +msgid "Total distinct versions: " +msgstr "按不同的版本共计：" + +#: cmdline/apt-cache.cc +msgid "Total distinct descriptions: " +msgstr "按不同的说明共计：" + +#: cmdline/apt-cache.cc +msgid "Total dependencies: " +msgstr "按依赖关系共计：" + +#: cmdline/apt-cache.cc +msgid "Total ver/file relations: " +msgstr "按版本/文件关系共计：" + +#: cmdline/apt-cache.cc +msgid "Total Desc/File relations: " +msgstr "按说明/文件关系共计：" + +#: cmdline/apt-cache.cc +msgid "Total Provides mappings: " +msgstr "提供映射共计：" + +#: cmdline/apt-cache.cc +msgid "Total globbed strings: " +msgstr "Glob 字串共计：" + +#: cmdline/apt-cache.cc +msgid "Total slack space: " +msgstr "Slack 空间共计：" + +#: cmdline/apt-cache.cc +msgid "Total space accounted for: " +msgstr "总占用空间：" + +#: cmdline/apt-cache.cc +msgid "This command is deprecated. Please use 'apt-mark showauto' instead." +msgstr "该命令已废弃。请使用‘apt-mark showauto’。" + +#: cmdline/apt-cache.cc +msgid "" +"Usage: apt-cache [options] command\n" +" apt-cache [options] show pkg1 [pkg2 ...]\n" +"\n" +"apt-cache queries and displays available information about installed\n" +"and installable packages. It works exclusively on the data acquired\n" +"into the local cache via the 'update' command of e.g. apt-get. The\n" +"displayed information may therefore be outdated if the last update was\n" +"too long ago, but in exchange apt-cache works independently of the\n" +"availability of the configured sources (e.g. offline).\n" +msgstr "" +"用法： apt-cache [选项] 命令\n" +" apt-cache [选项] show 软件包1 [软件包2 ...]\n" +"\n" +"apt-cache 可以查询和显示已安装和可安装软件包的可用信息。\n" +"它专门工作在本地的数据缓存上，而这些缓存可以通过比如\n" +"apt-get 的 'update' 命令来更新。如果距离上一次更新的时间太久，\n" +"那么它显示的信息可能就会过时。不过作为交换，apt-cache 不依赖\n" +"当前软件源的可用性（比如：离线状态）。\n" + +#: cmdline/apt-cache.cc +msgid "Show source records" +msgstr "显示源文件的各项记录" + +#: cmdline/apt-cache.cc +msgid "Search the package list for a regex pattern" +msgstr "根据正则表达式搜索软件包列表" + +#: cmdline/apt-cache.cc +msgid "Show raw dependency information for a package" +msgstr "显示该软件包的依赖关系信息" + +#: cmdline/apt-cache.cc +msgid "Show reverse dependency information for a package" +msgstr "显示所有依赖于该软件包的软件包名字" + +#: cmdline/apt-cache.cc +msgid "Show a readable record for the package" +msgstr "以便于阅读的格式介绍该软件包" + +#: cmdline/apt-cache.cc +msgid "List the names of all packages in the system" +msgstr "列出所有软件包的名字" + +#: cmdline/apt-cache.cc +msgid "Show policy settings" +msgstr "显示软件包的安装设置状态" + +#: cmdline/apt-cdrom.cc +msgid "Please provide a name for this Disc, such as 'Debian 5.0.3 Disk 1'" +msgstr "请给这张盘片起个名字，比如“Debian 5.0.3 Disk 1”" + +#: cmdline/apt-cdrom.cc +msgid "Please insert a Disc in the drive and press [Enter]" +msgstr "请把盘片插入驱动器再按「回车键」" + +#: cmdline/apt-cdrom.cc +#, c-format +msgid "Failed to mount '%s' to '%s'" +msgstr "无法将 ‘%s’ 挂载到 ‘%s’" + +#: cmdline/apt-cdrom.cc +msgid "" +"No CD-ROM could be auto-detected or found using the default mount point.\n" +"You may try the --cdrom option to set the CD-ROM mount point.\n" +"See 'man apt-cdrom' for more information about the CD-ROM auto-detection and " +"mount point." +msgstr "" +"从默认挂载点自动检测 CD-ROM 失败。\n" +"您可以尝试用 --cdrom 选项来设置 CD-ROM 的挂载点。\n" +"更多关于 CD-ROM 自动检测以及挂载点的信息，请参见‘man apt-cdrom’。" + +#: cmdline/apt-cdrom.cc +msgid "Repeat this process for the rest of the CDs in your set." +msgstr "请对您的盘片套件中的其它盘片重复相同的操作。" + +#: cmdline/apt-cdrom.cc +msgid "" +"Usage: apt-cdrom [options] command\n" +"\n" +"apt-cdrom is used to add CDROM's, USB flashdrives and other removable\n" +"media types as package sources to APT. The mount point and device\n" +"information is taken from apt.conf(5), udev(7) and fstab(5).\n" +msgstr "" +"用法： apt-cdrom [选项] 命令\n" +"\n" +"apt-cdrom 用于添加CDROM, USB存储器和其他可移动媒介作为 APT 软件源。\n" +"关于挂载点和设备的详细信息参见 apt.conf(5), udev(7) 和 fstab(5)。\n" + +#: cmdline/apt-config.cc +msgid "Arguments not in pairs" +msgstr "参数不成对" + +#: cmdline/apt-config.cc +msgid "" +"Usage: apt-config [options] command\n" +"\n" +"apt-config is an interface to the configuration settings used by\n" +"all APT tools, mainly intended for debugging and shell scripting.\n" +msgstr "" +"用法：apt-config [选项] 命令\n" +"\n" +"apt-config 是所有 APT 工具的配置接口，主要用于Debug和编写Shell脚本。\n" + +#: cmdline/apt-config.cc +msgid "get configuration values via shell evaluation" +msgstr "通过shell求值来获取设置值" + +#: cmdline/apt-config.cc +msgid "show the active configuration setting" +msgstr "显示活动的设置选项" + +#: cmdline/apt-dump-solver.cc +msgid "" +"Usage: apt-dump-solver\n" +"\n" +"apt-dump-solver is an interface to store an EDSP scenario in\n" +"a file and optionally forwards it to another solver.\n" +msgstr "" +"用法：apt-dump-solver\n" +"\n" +"apt-dump-solver 是一个在文件中存储EDSP情景的接口，\n" +"并可将其传送到另一个解决器。\n" + +#: cmdline/apt-extracttemplates.cc +msgid "" +"Usage: apt-extracttemplates file1 [file2 ...]\n" +"\n" +"apt-extracttemplates is used to extract config and template files\n" +"from debian packages. It is used mainly by debconf(1) to prompt for\n" +"configuration questions before installation of packages.\n" +msgstr "" +"用法： apt-extracttemplates 文件1 [文件2 ...]\n" +"\n" +"apt-extracttemplates 可以从 debian 软件包中解压出配置文件和模板\n" +"信息。它主要被 debconf(1) 用于在安装软件包前询问用户配置问题。\n" + +#: cmdline/apt-extracttemplates.cc +msgid "Cannot get debconf version. Is debconf installed?" +msgstr "无法获得 debconf 的版本。您安装了 debconf 吗？" + +#: cmdline/apt-get.cc +#, c-format +msgid "Couldn't find package %s" +msgstr "找不到软件包 %s" + +#: cmdline/apt-get.cc cmdline/apt-mark.cc +#, c-format +msgid "%s set to automatically installed.\n" +msgstr "%s 已设置为自动安装。\n" + +#: cmdline/apt-get.cc cmdline/apt-mark.cc +msgid "" +"This command is deprecated. Please use 'apt-mark auto' and 'apt-mark manual' " +"instead." +msgstr "该命令已废弃。请用‘apt-mark auto’或‘apt-mark manual’。" + +#: cmdline/apt-get.cc +msgid "Internal error, problem resolver broke stuff" +msgstr "内部错误，问题解决工具坏事了" + +#: cmdline/apt-get.cc +msgid "Supported modules:" +msgstr "支持的模块：" + +#: cmdline/apt-get.cc +msgid "" +"Usage: apt-get [options] command\n" +" apt-get [options] install|remove pkg1 [pkg2 ...]\n" +" apt-get [options] source pkg1 [pkg2 ...]\n" +"\n" +"apt-get is a command line interface for retrieval of packages\n" +"and information about them from authenticated sources and\n" +"for installation, upgrade and removal of packages together\n" +"with their dependencies.\n" +msgstr "" +"用法： apt-get [选项] 命令\n" +" apt-get [选项] install|remove 软件包1 [软件包2 ...]\n" +" apt-get [选项] source 软件包1 [软件包2 ...]\n" +"\n" +"apt-get 可以从认证软件源下载软件包及相关信息，以便安装和升级软件包，\n" +"或者用于移除软件包。在这些过程中，软件包依赖会被妥善处理。\n" + +#: cmdline/apt-get.cc +msgid "Retrieve new lists of packages" +msgstr "取回更新的软件包列表信息" + +#: cmdline/apt-get.cc +msgid "Perform an upgrade" +msgstr "进行一次升级" + +#: cmdline/apt-get.cc +msgid "Install new packages (pkg is libc6 not libc6.deb)" +msgstr "安装新的软件包(注：软件包名称是 libc6 而非 libc6.deb)" + +#: cmdline/apt-get.cc +msgid "Remove packages" +msgstr "卸载软件包" + +#: cmdline/apt-get.cc +msgid "Remove packages and config files" +msgstr "卸载并清除软件包的配置" + +#: cmdline/apt-get.cc cmdline/apt.cc +msgid "Remove automatically all unused packages" +msgstr "卸载所有自动安装且不再使用的软件包" + +#: cmdline/apt-get.cc +msgid "Distribution upgrade, see apt-get(8)" +msgstr "发布版升级，见 apt-get(8)" + +#: cmdline/apt-get.cc +msgid "Follow dselect selections" +msgstr "根据 dselect 的选择来进行升级" + +#: cmdline/apt-get.cc +msgid "Configure build-dependencies for source packages" +msgstr "为源码包配置所需的编译依赖关系" + +#: cmdline/apt-get.cc +msgid "Erase downloaded archive files" +msgstr "删除所有已下载的包文件" + +#: cmdline/apt-get.cc +msgid "Erase old downloaded archive files" +msgstr "删除已下载的旧包文件" + +#: cmdline/apt-get.cc +msgid "Verify that there are no broken dependencies" +msgstr "核对以确认系统的依赖关系的完整性" + +#: cmdline/apt-get.cc +msgid "Download source archives" +msgstr "下载源码包文件" + +#: cmdline/apt-get.cc +msgid "Download the binary package into the current directory" +msgstr "下载指定的二进制包到当前目录" + +#: cmdline/apt-get.cc +msgid "Download and display the changelog for the given package" +msgstr "下载指定软件包，并显示其changelog" + +#: cmdline/apt-helper.cc +msgid "Need one URL as argument" +msgstr "需要一个 URL 作为参数" + +#: cmdline/apt-helper.cc +msgid "Must specify at least one pair url/filename" +msgstr "必须指定至少一对URL或文件名" + +#: cmdline/apt-helper.cc +msgid "Download Failed" +msgstr "下载失败" + +#: cmdline/apt-helper.cc +#, c-format +msgid "GetSrvRec failed for %s" +msgstr "GetSrvRec 失败，因为 %s" + +#: cmdline/apt-helper.cc +msgid "" +"Usage: apt-helper [options] command\n" +" apt-helper [options] cat-file file ...\n" +" apt-helper [options] download-file uri target-path\n" +"\n" +"apt-helper bundles a variety of commands for shell scripts to use\n" +"e.g. the same proxy configuration or acquire system as APT would.\n" +msgstr "" +"用法： apt-helper [选项] 命令\n" +" apt-helper [选项] download-file URI 目标路径\n" +"\n" +"apt-helper 汇集了各种各样的功能来供shell脚本调用，比如\n" +"使用与APT相同的代理设置，或者相同的捕获系统。\n" + +#: cmdline/apt-helper.cc +msgid "download the given uri to the target-path" +msgstr "将 URI 指定的文件下载到目标路径" + +#: cmdline/apt-helper.cc +msgid "lookup a SRV record (e.g. _http._tcp.ftp.debian.org)" +msgstr "查阅一个 SRV 记录 (如： _http._tcp.ftp.debian.org)" + +#: cmdline/apt-helper.cc +msgid "concatenate files, with automatic decompression" +msgstr "自动解压并连接文件" + +#: cmdline/apt-helper.cc +msgid "detect proxy using apt.conf" +msgstr "用 apt.conf 检测代理设置" + +#: cmdline/apt-internal-planner.cc +msgid "" +"Usage: apt-internal-planner\n" +"\n" +"apt-internal-planner is an interface to use the current internal\n" +"installation planner for the APT family like an external one,\n" +"for debugging or the like.\n" +msgstr "" +"用法： apt-internal-planner\n" +"\n" +"apt-internal-planner 是一个可以像外部规划器那样使用当前的APT家族内部\n" +"安装顺序规划器的接口，以便调试等用途。\n" + +#: cmdline/apt-internal-solver.cc +msgid "" +"Usage: apt-internal-solver\n" +"\n" +"apt-internal-solver is an interface to use the current internal\n" +"resolver for the APT family like an external one, for debugging or\n" +"the like.\n" +msgstr "" +"用法： apt-internal-solver\n" +"\n" +"apt-internal-solver 是一个可以像外部解析器那样使用当前的APT家族内部\n" +"依赖解析器的接口，以便调试等用途。\n" + +#: cmdline/apt-mark.cc +#, c-format +msgid "%s can not be marked as it is not installed.\n" +msgstr "%s 还没有安装，因此无法标记。\n" + +#: cmdline/apt-mark.cc +#, c-format +msgid "%s was already set to manually installed.\n" +msgstr "%s 已经被设置为手动安装。\n" + +#: cmdline/apt-mark.cc +#, c-format +msgid "%s was already set to automatically installed.\n" +msgstr "%s 已经被设置为自动安装。\n" + +#: cmdline/apt-mark.cc +#, c-format +msgid "%s was already set on hold.\n" +msgstr "%s 已经设置为保留。\n" + +#: cmdline/apt-mark.cc +#, c-format +msgid "%s was already not hold.\n" +msgstr "%s 已经设置为不保留。\n" + +#: cmdline/apt-mark.cc +msgid "Executing dpkg failed. Are you root?" +msgstr "执行 dpkg 失败。您是 root 吗？" + +#: cmdline/apt-mark.cc +#, c-format +msgid "%s set on hold.\n" +msgstr "%s 设置为保留。\n" + +#: cmdline/apt-mark.cc +#, c-format +msgid "Canceled hold on %s.\n" +msgstr "取消保留 %s 的设置。\n" + +#: cmdline/apt-mark.cc +#, c-format +msgid "Selected %s for purge.\n" +msgstr "选中 %s 以待彻底卸载。\n" + +#: cmdline/apt-mark.cc +#, c-format +msgid "Selected %s for removal.\n" +msgstr "选中 %s 以待卸载。\n" + +#: cmdline/apt-mark.cc +#, c-format +msgid "Selected %s for installation.\n" +msgstr "选中 %s 以待安装。\n" + +#: cmdline/apt-mark.cc +msgid "" +"Usage: apt-mark [options] {auto|manual} pkg1 [pkg2 ...]\n" +"\n" +"apt-mark is a simple command line interface for marking packages\n" +"as manually or automatically installed. It can also be used to\n" +"manipulate the dpkg(1) selection states of packages, and to list\n" +"all packages with or without a certain marking.\n" +msgstr "" +"用法：apt-mark [选项] {auto|manual} 软件包1 [软件包2 ...]\n" +"\n" +"apt-mark 可以对软件包进行 手动/自动 安装标记，也可以用来处理软件\n" +"包的 dpkg(1) 选中状态，以及列出或过滤拥有某个标记的软件包。\n" + +#: cmdline/apt-mark.cc +msgid "Mark the given packages as automatically installed" +msgstr "标记指定软件包为自动安装" + +#: cmdline/apt-mark.cc +msgid "Mark the given packages as manually installed" +msgstr "标记指定软件包为手动安装" + +#: cmdline/apt-mark.cc +msgid "Mark a package as held back" +msgstr "标记指定软件包为保留(held back)" + +#: cmdline/apt-mark.cc +msgid "Unset a package set as held back" +msgstr "取消指定软件包的保留(held back)标记" + +#: cmdline/apt-mark.cc +msgid "Print the list of automatically installed packages" +msgstr "列出所有自动安装的软件包" + +#: cmdline/apt-mark.cc +msgid "Print the list of manually installed packages" +msgstr "列出所有手动安装的软件包" + +#: cmdline/apt-mark.cc +msgid "Print the list of package on hold" +msgstr "列出设为保留的软件包" + +#: cmdline/apt-sortpkgs.cc +msgid "Unknown package record!" +msgstr "未知的软件包记录！" + +#: cmdline/apt-sortpkgs.cc +msgid "" +"Usage: apt-sortpkgs [options] file1 [file2 ...]\n" +"\n" +"apt-sortpkgs is a simple tool to sort package information files.\n" +"By default it sorts by binary package information, but the -s option\n" +"can be used to switch to source package ordering instead.\n" +msgstr "" +"用法： apt-sortpkgs [选项] 文件1 [文件2 ...]\n" +"\n" +"简易工具 apt-sortpkgs 用于排序软件包信息。\n" +"它默认对二进制包信息排序，但是 -s 选项可以将其切换为\n" +"对源码包排序。\n" + +#: cmdline/apt.cc +msgid "" +"Usage: apt [options] command\n" +"\n" +"apt is a commandline package manager and provides commands for\n" +"searching and managing as well as querying information about packages.\n" +"It provides the same functionality as the specialized APT tools,\n" +"like apt-get and apt-cache, but enables options more suitable for\n" +"interactive use by default.\n" +msgstr "" +"用法： apt [选项] 命令\n" +"\n" +"命令行软件包管理器 apt 提供软件包搜索，管理和信息查询等功能。\n" +"它提供的功能与其他 APT 工具相同（像 apt-get 和 apt-cache），\n" +"但是默认情况下被设置得更适合交互。\n" + +#. query +#: cmdline/apt.cc +msgid "list packages based on package names" +msgstr "根据名称列出软件包" + +#: cmdline/apt.cc +msgid "search in package descriptions" +msgstr "搜索软件包描述" + +#: cmdline/apt.cc +msgid "show package details" +msgstr "显示软件包细节" + +#. package stuff +#: cmdline/apt.cc +msgid "install packages" +msgstr "安装软件包" + +#: cmdline/apt.cc +msgid "remove packages" +msgstr "移除软件包" + +#. system wide stuff +#: cmdline/apt.cc +msgid "update list of available packages" +msgstr "更新可用软件包列表" + +#: cmdline/apt.cc +msgid "upgrade the system by installing/upgrading packages" +msgstr "通过 安装/升级 软件来更新系统" + +#: cmdline/apt.cc +msgid "upgrade the system by removing/installing/upgrading packages" +msgstr "通过 卸载/安装/升级 来更新系统" + +#. misc +#: cmdline/apt.cc +msgid "edit the source information file" +msgstr "编辑软件源信息文件" + +#: dselect/install +msgid "Bad default setting!" +msgstr "错误的默认设置！" + +#: dselect/install dselect/update +msgid "Press [Enter] to continue." +msgstr "按「回车键」继续。" + +#: dselect/install +msgid "Do you want to erase any previously downloaded .deb files?" +msgstr "您想要删除之前下载的所有 .deb 文件吗？" + +#: dselect/install +msgid "Some errors occurred while unpacking. Packages that were installed" +msgstr "在解压时发生了一些错误。已经安装的软件包" + +#: dselect/install +msgid "will be configured. This may result in duplicate errors" +msgstr "将被配置。这个操作可能会导致出现重复的错误" + +#: dselect/install +msgid "or errors caused by missing dependencies. This is OK, only the errors" +msgstr "或一些由于依赖关系不能满足所产生的错误。这个问题不大，只有" + +#: dselect/install +msgid "" +"above this message are important. Please fix them and run [I]nstall again" +msgstr "这个提示之前的错误消息才值得您注意。请更正它们，然后再次执行 [I]nstall" + +#: dselect/update +msgid "Merging available information" +msgstr "正在合并可用信息" + +#: ftparchive/apt-ftparchive.cc +msgid "Package extension list is too long" +msgstr "软件包的扩展列表太长" + +#: ftparchive/apt-ftparchive.cc +#, c-format +msgid "Error processing directory %s" +msgstr "处理目录 %s 时出错" + +#: ftparchive/apt-ftparchive.cc +msgid "Source extension list is too long" +msgstr "源扩展列表太长" + +#: ftparchive/apt-ftparchive.cc +msgid "Error writing header to contents file" +msgstr "将头写入到目录文件时出错" + +#: ftparchive/apt-ftparchive.cc +#, c-format +msgid "Error processing contents %s" +msgstr "处理目录 %s 时出错" + +#: ftparchive/apt-ftparchive.cc +msgid "" +"Usage: apt-ftparchive [options] command\n" +"Commands: packages binarypath [overridefile [pathprefix]]\n" +" sources srcpath [overridefile [pathprefix]]\n" +" contents path\n" +" release path\n" +" generate config [groups]\n" +" clean config\n" +"\n" +"apt-ftparchive generates index files for Debian archives. It supports\n" +"many styles of generation from fully automated to functional replacements\n" +"for dpkg-scanpackages and dpkg-scansources\n" +"\n" +"apt-ftparchive generates Package files from a tree of .debs. The\n" +"Package file contains the contents of all the control fields from\n" +"each package as well as the MD5 hash and filesize. An override file\n" +"is supported to force the value of Priority and Section.\n" +"\n" +"Similarly apt-ftparchive generates Sources files from a tree of .dscs.\n" +"The --source-override option can be used to specify a src override file\n" +"\n" +"The 'packages' and 'sources' command should be run in the root of the\n" +"tree. BinaryPath should point to the base of the recursive search and \n" +"override file should contain the override flags. Pathprefix is\n" +"appended to the filename fields if present. Example usage from the \n" +"Debian archive:\n" +" apt-ftparchive packages dists/potato/main/binary-i386/ > \\\n" +" dists/potato/main/binary-i386/Packages\n" +"\n" +"Options:\n" +" -h This help text\n" +" --md5 Control MD5 generation\n" +" -s=? Source override file\n" +" -q Quiet\n" +" -d=? Select the optional caching database\n" +" --no-delink Enable delinking debug mode\n" +" --contents Control contents file generation\n" +" -c=? Read this configuration file\n" +" -o=? Set an arbitrary configuration option" +msgstr "" +"用法： apt-ftparchive [选项] 命令\n" +"命令： packages 二进制软件包搜索路径 [overridefile [路径前缀]]\n" +" sources 源代码包搜索路径 [overridefile [路径前缀]]\n" +" contents 搜索路径\n" +" release 搜索路径\n" +" generate 配置文件 [groups]\n" +" clean 配置文件\n" +"\n" +"apt-ftparchive 被用来为 Debian 软件包生成索引文件。它能支持\n" +"多种生成索引的方式，从全自动的索引生成到在功能上取代 dpkg-scanpackages \n" +"和 dpkg-scansources，都能游刃有余\n" +"\n" +"apt-ftparchive 能依据一个由 .deb 文件构成的文件树生成 Package 文件。\n" +"Package 文件里不仅注有每个软件包的 MD5 校验码和文件大小，\n" +"还有软件包的所有控制字段的内容。该软件同时支持 override 文件，\n" +"通过它可以强制指定软件包的优先级及其所属的软件类别。\n" +"\n" +"与上面类似，apt-ftparchive 也能由 .dsc 的文件树生成 Source 文件。\n" +"可以通过使用 --source-override 选项来指定一个 override 文件\n" +"\n" +"使用“packages”和“source”命令时，必须在文件树的根部执行本程序。\n" +"二进制包的搜索路径一定要是递归搜索的底层，而且 override 文件里\n" +"应该注明 override 的标志。若指定了路径前缀，那么它会被加到文件名前面。\n" +"下面有个来自 Debian 文档的例子：\n" +" apt-ftparchive packages dists/potato/main/binary-i386 > \\\n" +" dists/potato/main/binary-i386/Packages\n" +"\n" +"选项:\n" +" -h 本帮助文档\n" +" --md5 使之生成 MD5 校验和\n" +" -s=? 源代码包 override 文件\n" +" -q 输出精简信息\n" +" -d=? 指定可选的缓存数据库\n" +" -d=? 使用另一个可选的缓存数据库\n" +" --no-delink 开启delink的调试模式\n" +" --contents 使之生成控制内容文件\n" +" -c=? 读取指定配置文件\n" +" -o=? 设置任意指定的配置选项" + +#: ftparchive/apt-ftparchive.cc +msgid "No selections matched" +msgstr "没有任何选定项是匹配的" + +#: ftparchive/apt-ftparchive.cc +#, c-format +msgid "Some files are missing in the package file group `%s'" +msgstr "软件包文件组“%s”中缺少一些文件" + +#: ftparchive/cachedb.cc +#, c-format +msgid "DB was corrupted, file renamed to %s.old" +msgstr "数据库被损坏，该数据库文件的文件名已改成 %s.old" + +#: ftparchive/cachedb.cc +#, c-format +msgid "DB is old, attempting to upgrade %s" +msgstr "数据库已过期，现尝试进行升级 %s" + +#: ftparchive/cachedb.cc +msgid "" +"DB format is invalid. If you upgraded from an older version of apt, please " +"remove and re-create the database." +msgstr "" +"数据库格式无效。如果您是从一个老版本的 apt 升级而来，请删除数据库并重建它。" + +#: ftparchive/cachedb.cc +#, c-format +msgid "Unable to open DB file %s: %s" +msgstr "无法打开数据库文件 %s：%s" + +#: ftparchive/cachedb.cc +msgid "Failed to read .dsc" +msgstr "读取 .dsc 文件失败" + +#: ftparchive/cachedb.cc +msgid "Archive has no control record" +msgstr "归档文件没有包含控制字段" + +#: ftparchive/cachedb.cc +msgid "Unable to get a cursor" +msgstr "无法获得游标" + +#: ftparchive/contents.cc +msgid "realloc - Failed to allocate memory" +msgstr "realloc - 分配内存失败" + +#: ftparchive/multicompress.cc +#, c-format +msgid "Unknown compression algorithm '%s'" +msgstr "未知的压缩算法“%s”" + +#: ftparchive/multicompress.cc +#, c-format +msgid "Compressed output %s needs a compression set" +msgstr "压缩后的输出文件 %s 要求有一个压缩文件集合" + +#: ftparchive/multicompress.cc methods/rsh.cc +msgid "Failed to create IPC pipe to subprocess" +msgstr "无法为子进程创建 IPC 管道" + +#: ftparchive/multicompress.cc +msgid "Failed to fork" +msgstr "无法 fork" + +#: ftparchive/multicompress.cc +msgid "Compress child" +msgstr "压缩子进程" + +#: ftparchive/multicompress.cc +#, c-format +msgid "Internal error, failed to create %s" +msgstr "内部错误，无法创建 %s" + +#: ftparchive/multicompress.cc +msgid "IO to subprocess/file failed" +msgstr "无法对子进程或文件进行读写" + +#: ftparchive/multicompress.cc +msgid "Failed to read while computing MD5" +msgstr "在计算 MD5 校验和时无法读取数据" + +#: ftparchive/override.cc +#, c-format +msgid "Unable to open %s" +msgstr "无法打开 %s" + +#. skip spaces +#. find end of word +#: ftparchive/override.cc +#, c-format +msgid "Malformed override %s line %llu (%s)" +msgstr "override 文件 %s 第 %llu (%s) 行的格式有误" + +#: ftparchive/override.cc +#, c-format +msgid "Failed to read the override file %s" +msgstr "无法读取 override 文件 %s" + +#: ftparchive/override.cc +#, c-format +msgid "Malformed override %s line %llu #1" +msgstr "override 文件 %s 第 %llu 行的格式有误 #1" + +#: ftparchive/override.cc +#, c-format +msgid "Malformed override %s line %llu #2" +msgstr "override 文件 %s 第 %llu 行的格式有误 #2" + +#: ftparchive/override.cc +#, c-format +msgid "Malformed override %s line %llu #3" +msgstr "override 文件 %s 第 %llu 行的格式有误 #3" + +#: ftparchive/writer.cc +#, c-format +msgid "W: Unable to read directory %s\n" +msgstr "警告：无法读取目录 %s\n" + +#: ftparchive/writer.cc +#, c-format +msgid "W: Unable to stat %s\n" +msgstr "警告：无法获得 %s 的状态\n" + +#: ftparchive/writer.cc +msgid "E: " +msgstr "错误：" + +#: ftparchive/writer.cc +msgid "W: " +msgstr "警告：" + +#: ftparchive/writer.cc +msgid "E: Errors apply to file " +msgstr "错误：处理文件时出错 " + +#: ftparchive/writer.cc +#, c-format +msgid "Failed to resolve %s" +msgstr "无法解析 %s" + +#: ftparchive/writer.cc +msgid "Tree walking failed" +msgstr "无法遍历目录树" + +#: ftparchive/writer.cc +#, c-format +msgid "Failed to open %s" +msgstr "无法打开 %s" + +#: ftparchive/writer.cc +#, c-format +msgid " DeLink %s [%s]\n" +msgstr " DeLink %s [%s]\n" + +#: ftparchive/writer.cc +#, c-format +msgid "*** Failed to link %s to %s" +msgstr "*** 无法将 %s 链接到 %s" + +#: ftparchive/writer.cc +#, c-format +msgid " DeLink limit of %sB hit.\n" +msgstr " 达到了 DeLink 的上限 %sB。\n" + +#: ftparchive/writer.cc +msgid "Archive had no package field" +msgstr "归档文件没有包含 package 字段" + +#: ftparchive/writer.cc +#, c-format +msgid " %s has no override entry\n" +msgstr " %s 中没有 override 项\n" + +#: ftparchive/writer.cc +#, c-format +msgid " %s maintainer is %s not %s\n" +msgstr " %s 的维护者 %s 并非 %s\n" + +#: ftparchive/writer.cc +#, c-format +msgid " %s has no source override entry\n" +msgstr " %s 没有源代码的 override 项\n" + +#: ftparchive/writer.cc +#, c-format +msgid " %s has no binary override entry either\n" +msgstr " %s 中没有二进制文件的 override 项\n" + +#: methods/cdrom.cc +#, c-format +msgid "Unable to read the cdrom database %s" +msgstr "无法读取盘片数据库 %s" + +#: methods/cdrom.cc +msgid "" +"Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update " +"cannot be used to add new CD-ROMs" +msgstr "" +"请使用 apt-cdrom，通过它可以让 APT 识别该盘片。apt-get upgdate 不能被用来加入" +"新的盘片。" + +#: methods/cdrom.cc +msgid "Wrong CD-ROM" +msgstr "错误的 CD-ROM" + +#: methods/cdrom.cc +#, c-format +msgid "Unable to unmount the CD-ROM in %s, it may still be in use." +msgstr "无法卸载挂载于 %s 的 CD-ROM，它可能正被使用。" + +#: methods/cdrom.cc +msgid "Disk not found." +msgstr "找不到盘片。" + +#: methods/cdrom.cc methods/file.cc methods/rsh.cc +msgid "File not found" +msgstr "无法找到文件" + +#. TRANSLATOR: %s is e.g. Tor's ".onion" which would likely fail or leak info (RFC7686) +#: methods/connect.cc +#, c-format +msgid "Direct connection to %s domains is blocked by default." +msgstr "通向 %s 域名的直接连接被设为默认阻止。" + +#: methods/connect.cc methods/http.cc +#, c-format +msgid "Connecting to %s (%s)" +msgstr "正在连接 %s (%s)" + +#: methods/connect.cc +#, c-format +msgid "[IP: %s %s]" +msgstr "[IP: %s %s]" + +#: methods/connect.cc +#, c-format +msgid "Could not create a socket for %s (f=%u t=%u p=%u)" +msgstr "无法为 %s 创建套接字(f=%u t=%u p=%u)" + +#: methods/connect.cc +#, c-format +msgid "Cannot initiate the connection to %s:%s (%s)." +msgstr "无法发起与 %s:%s (%s) 的连接" + +#: methods/connect.cc +#, c-format +msgid "Could not connect to %s:%s (%s), connection timed out" +msgstr "无法连接上 %s:%s (%s)，连接超时" + +#: methods/connect.cc methods/ftp.cc methods/rsh.cc +msgid "Failed" +msgstr "失败" + +#: methods/connect.cc +#, c-format +msgid "Could not connect to %s:%s (%s)." +msgstr "无法连接上 %s:%s (%s)。" + +#. We say this mainly because the pause here is for the +#. ssh connection that is still going +#: methods/connect.cc methods/rsh.cc +#, c-format +msgid "Connecting to %s" +msgstr "正在连接 %s" + +#: methods/connect.cc +#, c-format +msgid "Could not resolve '%s'" +msgstr "无法解析域名“%s”" + +#: methods/connect.cc +#, c-format +msgid "Temporary failure resolving '%s'" +msgstr "暂时不能解析域名“%s”" + +#: methods/connect.cc +#, c-format +msgid "System error resolving '%s:%s'" +msgstr "解析“%s:%s”时出现系统故障" + +#: methods/connect.cc +#, c-format +msgid "Something wicked happened resolving '%s:%s' (%i - %s)" +msgstr "解析“%s:%s”时，出现了某些故障(%i - %s)" + +#: methods/connect.cc +#, c-format +msgid "Unable to connect to %s:%s:" +msgstr "不能连接到 %s：%s：" + +#: methods/copy.cc +msgid "Failed to stat" +msgstr "无法读取状态" + +#: methods/file.cc +msgid "Invalid URI, local URIS must not start with //" +msgstr "无效的 URI，本地 URI 不能以 // 开头" + +#. Login must be before getpeername otherwise dante won't work. +#: methods/ftp.cc +msgid "Logging in" +msgstr "正在登录" + +#: methods/ftp.cc +msgid "Unable to determine the peer name" +msgstr "无法获知对方主机名" + +#: methods/ftp.cc +msgid "Unable to determine the local name" +msgstr "无法获知本地主机名" + +#: methods/ftp.cc +#, c-format +msgid "The server refused the connection and said: %s" +msgstr "服务器拒绝了我们的连接，响应信息为：%s" + +#: methods/ftp.cc +#, c-format +msgid "USER failed, server said: %s" +msgstr "USER 指令出错，服务器响应信息为：%s" + +#: methods/ftp.cc +#, c-format +msgid "PASS failed, server said: %s" +msgstr "PASS 指令出错，服务器响应信息为：%s" + +#: methods/ftp.cc +msgid "" +"A proxy server was specified but no login script, Acquire::ftp::ProxyLogin " +"is empty." +msgstr "" +"您指定了代理服务器，但是没有登陆脚本，Acquire::ftp::ProxyLogin 设置为空。" + +#: methods/ftp.cc +#, c-format +msgid "Login script command '%s' failed, server said: %s" +msgstr "登录脚本命令“%s”出错，服务器响应信息为：%s" + +#: methods/ftp.cc +#, c-format +msgid "TYPE failed, server said: %s" +msgstr "TYPE 指令出错，服务器响应信息为：%s" + +#: methods/ftp.cc methods/rsh.cc +msgid "Connection timeout" +msgstr "连接超时" + +#: methods/ftp.cc +msgid "Server closed the connection" +msgstr "服务器关闭了连接" + +#: methods/ftp.cc methods/rsh.cc +msgid "A response overflowed the buffer." +msgstr "回应超出了缓存区大小。" + +#: methods/ftp.cc +msgid "Protocol corruption" +msgstr "协议有误" + +#: methods/ftp.cc +msgid "Could not create a socket" +msgstr "无法创建套接字" + +#: methods/ftp.cc +msgid "Could not connect data socket, connection timed out" +msgstr "无法连接数据套接字，连接超时" + +#: methods/ftp.cc +msgid "Could not connect passive socket." +msgstr "无法连接被动模式的套接字。" + +#: methods/ftp.cc +msgid "getaddrinfo was unable to get a listening socket" +msgstr "getaddrinfo 无法得到监听套接字" + +#: methods/ftp.cc +msgid "Could not bind a socket" +msgstr "无法绑定套接字" + +#: methods/ftp.cc +msgid "Could not listen on the socket" +msgstr "无法在套接字上监听" + +#: methods/ftp.cc +msgid "Could not determine the socket's name" +msgstr "无法确定套接字的名字" + +#: methods/ftp.cc +msgid "Unable to send PORT command" +msgstr "无法发出 PORT 指令" + +#: methods/ftp.cc +#, c-format +msgid "Unknown address family %u (AF_*)" +msgstr "无法识别的地址族 %u (AF_*)" + +#: methods/ftp.cc +#, c-format +msgid "EPRT failed, server said: %s" +msgstr "EPRT 指令失败，服务器响应为：%s" + +#: methods/ftp.cc +msgid "Data socket connect timed out" +msgstr "数据套接字连接超时" + +#: methods/ftp.cc +msgid "Unable to accept connection" +msgstr "无法接受连接" + +#: methods/ftp.cc methods/http.cc methods/rsh.cc +msgid "Problem hashing file" +msgstr "把文件加入哈希表时出错" + +#: methods/ftp.cc +#, c-format +msgid "Unable to fetch file, server said '%s'" +msgstr "无法获取文件，服务器响应为“%s”" + +#: methods/ftp.cc methods/rsh.cc +msgid "Data socket timed out" +msgstr "数据套接字超时" + +#: methods/ftp.cc +#, c-format +msgid "Data transfer failed, server said '%s'" +msgstr "数据传送出错，服务器响应为“%s”" + +#. Get the files information +#: methods/ftp.cc +msgid "Query" +msgstr "查询" + +#: methods/ftp.cc +msgid "Unable to invoke " +msgstr "无法调用 " + +#. TRANSLATORS: %s is a single techy word like 'NODATA' +#: methods/gpgv.cc +#, c-format +msgid "" +"Signed file isn't valid, got '%s' (does the network require authentication?)" +msgstr "明文签署文件不可用，结果为‘%s’（您的网络接入需要认证吗？）" + +#: methods/gpgv.cc +msgid "At least one invalid signature was encountered." +msgstr "至少发现一个无效的签名。" + +#: methods/gpgv.cc +msgid "" +"Internal error: Good signature, but could not determine key fingerprint?!" +msgstr "内部错误：签名正确无误，但是无法确认密钥指纹？！" + +#: methods/gpgv.cc +msgid "Could not execute 'apt-key' to verify signature (is gnupg installed?)" +msgstr "无法运行 apt-key 以验证签名(您安装了 gnupg 吗？)" + +#: methods/gpgv.cc +msgid "Unknown error executing apt-key" +msgstr "运行 apt-key 时发生未知错误" + +#. TRANSLATORS: The second %s is the reason and is untranslated for repository owners. +#: methods/gpgv.cc +#, c-format +msgid "Signature by key %s uses weak digest algorithm (%s)" +msgstr "密钥 %s 生成的数字签名使用了弱安全性摘要算法(%s)" + +#: methods/gpgv.cc +msgid "The following signatures were invalid:\n" +msgstr "下列签名无效：\n" + +#: methods/gpgv.cc +msgid "" +"The following signatures couldn't be verified because the public key is not " +"available:\n" +msgstr "由于没有公钥，无法验证下列签名：\n" + +#: methods/http.cc +msgid "Error writing to the file" +msgstr "写入文件出错" + +#: methods/http.cc +msgid "Error reading from server. Remote end closed connection" +msgstr "从服务器读取数据时出错，对方关闭了连接" + +#: methods/http.cc +msgid "Error reading from server" +msgstr "从服务器读取数据出错" + +#: methods/http.cc +msgid "Error writing to file" +msgstr "写入文件出错" + +#: methods/http.cc +msgid "Select failed" +msgstr "select 调用出错" + +#: methods/http.cc +msgid "Connection timed out" +msgstr "连接超时" + +#: methods/http.cc +msgid "Error writing to output file" +msgstr "写输出文件时出错" + +#. FIXME: fallback to a default mirror here instead +#. and provide a config option to define that default +#: methods/mirror.cc +#, c-format +msgid "No mirror file '%s' found " +msgstr "没有找到镜像文件 %s" + +#. FIXME: fallback to a default mirror here instead +#. and provide a config option to define that default +#: methods/mirror.cc +#, c-format +msgid "Can not read mirror file '%s'" +msgstr "无法读取镜像文件 %s" + +#: methods/mirror.cc +#, c-format +msgid "No entry found in mirror file '%s'" +msgstr "在镜像文件 %s 中未找到所需条目" + +#: methods/mirror.cc +#, c-format +msgid "[Mirror: %s]" +msgstr "[镜像：%s]" + +#: methods/rred.cc +msgid "Failed to set modification time" +msgstr "无法设置文件的修改日期" + +#: methods/rsh.cc +msgid "Connection closed prematurely" +msgstr "连接被永久关闭" + +#: methods/server.cc +msgid "Waiting for headers" +msgstr "正在等待报头" + +#: methods/server.cc +msgid "The HTTP server sent an invalid reply header" +msgstr "该 HTTP 服务器发送了一个无效的应答报头" + +#: methods/server.cc +msgid "Bad header line" +msgstr "错误的报头行" + +#: methods/server.cc +msgid "The HTTP server sent an invalid Content-Length header" +msgstr "该 HTTP 服务器发送了一个无效的 Content-Length 报头" + +#: methods/server.cc +msgid "The HTTP server sent an invalid Content-Range header" +msgstr "该 HTTP 服务器发送了一个无效的 Content-Range 报头" + +#: methods/server.cc +msgid "This HTTP server has broken range support" +msgstr "该 HTTP 服务器的 range 支持不正常" + +#: methods/server.cc +msgid "Unknown date format" +msgstr "无法识别的日期格式" + +#: methods/server.cc +msgid "Bad header data" +msgstr "错误的报头数据" + +#: methods/server.cc +msgid "Connection failed" +msgstr "连接失败" + +#: methods/server.cc +#, c-format +msgid "" +"Automatically disabled %s due to incorrect response from server/proxy. (man " +"5 apt.conf)" +msgstr "由于服务器或代理的响应错误，因此自动禁止 %s。（参见 man 5 apt.conf）" + +#: methods/server.cc +msgid "Internal error" +msgstr "内部错误" + +#: methods/store.cc +msgid "Empty files can't be valid archives" +msgstr "空文件不是有效归档" + +#~ msgid "(not found)" +#~ msgstr "(没有找到)" + +#~ msgid " Package pin: " +#~ msgstr " 软件包锁：" + +#~ msgid "There is no public key available for the following key IDs:\n" +#~ msgstr "以下 ID 的密钥没有可用的公钥：\n" + +#~ msgid "The repository is insufficiently signed by key %s (%s)" +#~ msgstr "仓库 “%s” 数字签名不完整。" + +#~ msgid "" +#~ "%s dependency for %s can't be satisfied because %s is not allowed on '%s' " +#~ "packages" +#~ msgstr "" +#~ "由于 %3$s 不被软件包 %4$s 所允许，因此不能满足 %2$s 所要求的 %1$s 依赖关系" + +#~ msgid "" +#~ "%s dependency for %s cannot be satisfied because the package %s cannot be " +#~ "found" +#~ msgstr "由于无法找到软件包 %3$s ，因此不能满足 %2$s 所要求的 %1$s 依赖关系" + +#~ msgid "" +#~ "Failed to satisfy %s dependency for %s: Installed package %s is too new" +#~ msgstr "无法满足 %2$s 所要求 %1$s 依赖关系：已安装的软件包 %3$s 太新" + +#~ msgid "" +#~ "%s dependency for %s cannot be satisfied because candidate version of " +#~ "package %s can't satisfy version requirements" +#~ msgstr "" +#~ "软件包 %3$s 的候选版本不能满足版本要求，因此 %2$s 软件包的 %1$s 依赖无法满" +#~ "足" + +#~ msgid "" +#~ "%s dependency for %s cannot be satisfied because package %s has no " +#~ "candidate version" +#~ msgstr "软件包 %3$s 没有可用的候选版本，因此 %2$s 的 %1$s 依赖无法满足" + +#~ msgid "Failed to satisfy %s dependency for %s: %s" +#~ msgstr "无法满足 %2$s 所要求 %1$s 依赖关系：%3$s" + +#~ msgid "Build-dependencies for %s could not be satisfied." +#~ msgstr "不能满足软件包 %s 所要求的构建依赖关系。" + +#~ msgid "Problem unlinking %s" +#~ msgstr "在使用 unlink 删除 %s 时出错" + +#~ msgid "Failed to unlink %s" +#~ msgstr "无法使用 unlink 删除 %s" + +#~ msgid "" +#~ "Usage: apt-cache [options] command\n" +#~ " apt-cache [options] show pkg1 [pkg2 ...]\n" +#~ "\n" +#~ "apt-cache is a low-level tool used to query information\n" +#~ "from APT's binary cache files\n" +#~ msgstr "" +#~ "用法： apt-cache [选项] 命令\n" +#~ " apt-cache [选项] show 软件包1 [软件包2 ...]\n" +#~ "\n" +#~ "apt-cache 是一个底层的工具，它可以在 APT 的\n" +#~ "二进制缓存文件中查询信息\n" + +#~ msgid "Commands:" +#~ msgstr "命令：" + +#~ msgid "" +#~ "Options:\n" +#~ " -h This help text.\n" +#~ " -p=? The package cache.\n" +#~ " -s=? The source cache.\n" +#~ " -q Disable progress indicator.\n" +#~ " -i Show only important deps for the unmet command.\n" +#~ " -c=? Read this configuration file\n" +#~ " -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n" +#~ "See the apt-cache(8) and apt.conf(5) manual pages for more information.\n" +#~ msgstr "" +#~ "选项：\n" +#~ " -h 本帮助文档。\n" +#~ " -p=? 软件包的缓存。\n" +#~ " -s=? 源代码包的缓存。\n" +#~ " -q 关闭进度显示。\n" +#~ " -i 仅为 unmet 命令显示重要的依赖关系。\n" +#~ " -c=? 读取指定配置文件\n" +#~ " -o=? 设置任意指定的配置选项，例如 -o dir::cache=/tmp\n" +#~ "若要了解更多信息，您还可以查阅 apt-cache(8) 和 apt.conf(5) 参考手册。\n" + +#~ msgid "" +#~ "Usage: apt [options] command\n" +#~ "\n" +#~ "CLI for apt.\n" +#~ msgstr "" +#~ "用法： apt [选项] 命令\n" +#~ "\n" +#~ "apt 的命令行界面。\n" + +#, fuzzy +#~ msgid "" +#~ "Options:\n" +#~ " -h This help text\n" +#~ " -d CD-ROM mount point\n" +#~ " -r Rename a recognized CD-ROM\n" +#~ " -m No mounting\n" +#~ " -f Fast mode, don't check package files\n" +#~ " -a Thorough scan mode\n" +#~ " --no-auto-detect Do not try to auto detect drive and mount point\n" +#~ " -c=? Read this configuration file\n" +#~ " -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n" +#~ "See fstab(5)\n" +#~ msgstr "" +#~ "选项：\n" +#~ " -h 显示本帮助信息\n" +#~ " -q 日志型输出 - 不显示进度\n" +#~ " -qq 安静模式，只输出错误信息\n" +#~ " -s 无动作。只说明将要做什么。\n" +#~ " -f 读取/写入 指定文件的 自动/手动 标记\n" +#~ " -c=? 读取指定的配置文件\n" +#~ " -o=? 任意设置一个配置项，比如 -o dir::cache=/tmp\n" +#~ "更多细节请参见 the apt-mark(8) 和 apt.conf(5) 的 man 手册。" + +#~ msgid "" +#~ "Options:\n" +#~ " -h This help text.\n" +#~ " -c=? Read this configuration file\n" +#~ " -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n" +#~ msgstr "" +#~ "选项：\n" +#~ " -h 显示本帮助文本。\n" +#~ " -c=? 读取指定的配置文件\n" +#~ " -o=? 设置任意指定的配置选项，例如：-o dir::cache=/tmp\n" + +#~ msgid "" +#~ "Options:\n" +#~ " -h This help text.\n" +#~ " -q Loggable output - no progress indicator\n" +#~ " -qq No output except for errors\n" +#~ " -s No-act. Just prints what would be done.\n" +#~ " -f read/write auto/manual marking in the given file\n" +#~ " -c=? Read this configuration file\n" +#~ " -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n" +#~ "See the apt-mark(8) and apt.conf(5) manual pages for more information." +#~ msgstr "" +#~ "选项：\n" +#~ " -h 显示本帮助信息\n" +#~ " -q 日志型输出 - 不显示进度\n" +#~ " -qq 安静模式，只输出错误信息\n" +#~ " -s 无动作。只说明将要做什么。\n" +#~ " -f 读取/写入 指定文件的 自动/手动 标记\n" +#~ " -c=? 读取指定的配置文件\n" +#~ " -o=? 任意设置一个配置项，比如 -o dir::cache=/tmp\n" +#~ "更多细节请参见 the apt-mark(8) 和 apt.conf(5) 的 man 手册。" + +#~ msgid "" +#~ "Usage: apt-sortpkgs [options] file1 [file2 ...]\n" +#~ "\n" +#~ "apt-sortpkgs is a simple tool to sort package files. The -s option is " +#~ "used\n" +#~ "to indicate what kind of file it is.\n" +#~ "\n" +#~ "Options:\n" +#~ " -h This help text\n" +#~ " -s Use source file sorting\n" +#~ " -c=? Read this configuration file\n" +#~ " -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n" +#~ msgstr "" +#~ "用法： apt-sortpkgs [选项] 文件甲 [文件乙 ...]\n" +#~ "\n" +#~ "apt-sortpkgs 是对软件包索引文件内容进行排序的简单工具。-s 选项\n" +#~ "是用来指出后面参数所示文件是哪种文件。\n" +#~ "\n" +#~ "选项：\n" +#~ " -h 本帮助文档\n" +#~ " -s 根据源文件排序\n" +#~ " -c=? 读取指定配置文件\n" +#~ " -o=? 设置任意指定的配置选项，例如 -o dir::cache=/tmp\n" + +#~ msgid "Child process failed" +#~ msgstr "子进程出错" + +#, fuzzy +#~ msgid "Must specifc at least one srv record" +#~ msgstr "必须指定至少一对URL或者文件名" + +#~ msgid "Failed to create pipes" +#~ msgstr "无法创建管道" + +#~ msgid "Failed to exec gzip " +#~ msgstr "无法执行 gzip" + +#~ msgid "%s %s for %s compiled on %s %s\n" +#~ msgstr "%s %s，用于 %s 体系结构，编译于 %s %s\n" + +#~ msgid "Failed to create FILE*" +#~ msgstr "无法创建 FILE*" + +#~ msgid "Malformed stanza %u in source list %s (URI parse)" +#~ msgstr "安装源配置文件“%2$s”第 %1$u 节有错误(URI 解析)" + +#~ msgid "Malformed line %lu in source list %s ([option] unparseable)" +#~ msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误([选项] 无法解析)" + +#~ msgid "Malformed line %lu in source list %s ([option] too short)" +#~ msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误([选项] 太短)" + +#~ msgid "Malformed line %lu in source list %s ([%s] is not an assignment)" +#~ msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误([%3$s] 不是一个任务)" + +#~ msgid "Malformed line %lu in source list %s ([%s] has no key)" +#~ msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误([%3$s] 没有键)" + +#~ msgid "Malformed line %lu in source list %s ([%s] key %s has no value)" +#~ msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误([%3$s] 键 %4$s 没有值)" + +#~ msgid "Malformed line %lu in source list %s (URI)" +#~ msgstr "安装源配置文件“%2$s”第 %1$lu 行的格式有误(URI)" + +#~ msgid "Malformed line %lu in source list %s (dist)" +#~ msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误(发行版)" + +#~ msgid "Malformed line %lu in source list %s (URI parse)" +#~ msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误(URI 解析)" + +#~ msgid "Malformed line %lu in source list %s (absolute dist)" +#~ msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误(独立发行版)" + +#~ msgid "Malformed line %lu in source list %s (dist parse)" +#~ msgstr "安装源配置文件“%2$s”第 %1$lu 行有错误(发行版解析)" + +#~ msgid "Package %s %s was not found while processing file dependencies" +#~ msgstr "当处理文件依赖关系时，无法找到软件包 %s %s" + +#~ msgid "Couldn't stat source package list %s" +#~ msgstr "无法获取源软件包列表 %s 的状态" + +#~ msgid "Collecting File Provides" +#~ msgstr "正在收集文件所提供的软件包" + +#~ msgid "Unable to find hash sum for '%s' in Release file" +#~ msgstr "在 Release 文件中找不到 %s 的哈希值" + +#~ msgid "Vendor block %s contains no fingerprint" +#~ msgstr "软件提供者数据块内 %s 没有包含指纹信息" + +#~ msgid "Total dependency version space: " +#~ msgstr "依赖关系版本名所占空间共计：" + +#~ msgid "You don't have enough free space in %s" +#~ msgstr "您在 %s 上没有足够的可用空间" + +#~ msgid "Done" +#~ msgstr "完成" + +#~ msgid "No keyring installed in %s." +#~ msgstr "%s 中没有安装密钥环。" + +#~ msgid "Is stdout a terminal?" +#~ msgstr "stdout 是终端吗？" + +#, fuzzy +#~ msgid "Internal error, Upgrade broke stuff" +#~ msgstr "内部错误，全部升级工具坏事了" + +#~ msgid "%s not a valid DEB package." +#~ msgstr "%s 不是一个有效的 DEB 软件包。" + +#~ msgid "" +#~ "Using CD-ROM mount point %s\n" +#~ "Mounting CD-ROM\n" +#~ msgstr "" +#~ "现把 %s 作为了 CD-ROM 的挂载点\n" +#~ "正在挂载 CD-ROM\n" + +#~ msgid "" +#~ "Could not patch %s with mmap and with file operation usage - the patch " +#~ "seems to be corrupt." +#~ msgstr "无法连同 mmap 和文件操作用途为 %s 打补丁 - 补丁可能已损坏。" + +#~ msgid "" +#~ "Could not patch %s with mmap (but no mmap specific fail) - the patch " +#~ "seems to be corrupt." +#~ msgstr "无法连同 mmap 为 %s 打补丁(但没有 mmap 的错误) - 补丁可能已损坏。" + +#~ msgid "Ignore unavailable target release '%s' of package '%s'" +#~ msgstr "忽略不可用的软件包 %2$s 的目标发行版本 %1$s" + +#~ msgid "This is not a valid DEB archive, it has no '%s', '%s' or '%s' member" +#~ msgstr "这不是一个有效的 DEB 包文件，其包内遗漏了“%s”，“%s”或者“%s”" + +#~ msgid "MD5Sum mismatch" +#~ msgstr "MD5 校验和不符" + +#~ msgid "" +#~ "I wasn't able to locate a file for the %s package. This might mean you " +#~ "need to manually fix this package." +#~ msgstr "" +#~ "我无法找到对应 %s 软件包的文件。在这种情况下您可能需要手动修正这个软件包。" + +#~ msgid "Can not write log, openpty() failed (/dev/pts not mounted?)\n" +#~ msgstr "无法写入日志。 openpty() 失败(没有挂载 /dev/pts ？)\n" + +#~ msgid "Skipping nonexistent file %s" +#~ msgstr "跳过不存在的文件 %s" + +#~ msgid "Failed to remove %s" +#~ msgstr "无法卸载 %s" + +#~ msgid "Unable to create %s" +#~ msgstr "无法创建 %s " + +#~ msgid "Failed to stat %sinfo" +#~ msgstr "无法读取 %sinfo 的状态" + +#~ msgid "The info and temp directories need to be on the same filesystem" +#~ msgstr "info 和 temp 目录要求处于同一文件系统之下" + +#~ msgid "Failed to change to the admin dir %sinfo" +#~ msgstr "无法切换工作目录到 admin 目录 %sinfo" + +#~ msgid "Internal error getting a package name" +#~ msgstr "在获取软件包名字时出现内部错误" + +#~ msgid "Reading file listing" +#~ msgstr "正在读取文件列表" + +#~ msgid "" +#~ "Failed to open the list file '%sinfo/%s'. If you cannot restore this file " +#~ "then make it empty and immediately re-install the same version of the " +#~ "package!" +#~ msgstr "" +#~ "无法打开列表文件“%sinfo/%s”。如果您不能恢复这个文件，那么就清空该文件并马" +#~ "上重新安装相同版本的这个软件包！" + +#~ msgid "Failed reading the list file %sinfo/%s" +#~ msgstr "无法读取列表文件 %sinfo/%s" + +#~ msgid "Internal error getting a node" +#~ msgstr "获得一个节点时出现内部错误" + +#~ msgid "Failed to open the diversions file %sdiversions" +#~ msgstr "无法打开转移配置文件 %sdiversions" + +#~ msgid "The diversion file is corrupted" +#~ msgstr "该转移配置文件被损坏了" + +#~ msgid "Invalid line in the diversion file: %s" +#~ msgstr "转移配置文件中有一行是无效的：%s" + +#~ msgid "Internal error adding a diversion" +#~ msgstr "添加转移配置时出现内部错误" + +#~ msgid "The pkg cache must be initialized first" +#~ msgstr "必须首先初始化软件包缓存" + +#~ msgid "Failed to find a Package: header, offset %lu" +#~ msgstr "无法找到某个软件包：包头，于偏移位置 %lu" + +#~ msgid "Bad ConfFile section in the status file. Offset %lu" +#~ msgstr "状态文件中有错误的 ConfFile 段。位于偏移位置 %lu" + +#~ msgid "Error parsing MD5. Offset %lu" +#~ msgstr "解析 MD5 出错。文件内偏移量为 %lu" + +#~ msgid "Couldn't change to %s" +#~ msgstr "无法切换工作目录到 %s" + +#~ msgid "Failed to locate a valid control file" +#~ msgstr "无法在归档文件中找到有效的主控文件" + +#~ msgid "Couldn't open pipe for %s" +#~ msgstr "无法为 %s 开启管道" + +#~ msgid "Read error from %s process" +#~ msgstr "从 %s 进程读取数据出错" + +#~ msgid "Got a single header line over %u chars" +#~ msgstr "接收到一行报头行，它的长度超过了 %u 个字符" + +#~ msgid "Note: This is done automatic and on purpose by dpkg." +#~ msgstr "注意：这是自动被 dpkg 有意完成的。" + +#~ msgid "Malformed override %s line %lu #1" +#~ msgstr "override 文件 %s 第 %lu 行的格式有误 #1" + +#~ msgid "Malformed override %s line %lu #2" +#~ msgstr "override 文件 %s 第 %lu 行的格式有误 #2" + +#~ msgid "Malformed override %s line %lu #3" +#~ msgstr "override 文件 %s 第 %lu 行的格式有误 #3" + +#~ msgid "decompressor" +#~ msgstr "解压程序" + +#~ msgid "read, still have %lu to read but none left" +#~ msgstr "读取文件出错，还剩 %lu 字节没有读出" + +#~ msgid "write, still have %lu to write but couldn't" +#~ msgstr "写入文件出错，还剩 %lu 字节没有保存" + +#~ msgid "" +#~ "Could not perform immediate configuration on already unpacked '%s'. " +#~ "Please see man 5 apt.conf under APT::Immediate-Configure for details." +#~ msgstr "" +#~ "无法立即对已经解压的 %s 进行配置。请查看 man 5 apt.conf 中的 APT::" +#~ "Immediate-Configure。" + +#~ msgid "Error occurred while processing %s (NewPackage)" +#~ msgstr "处理 %s (NewPackage)时出错" + +#~ msgid "Error occurred while processing %s (UsePackage1)" +#~ msgstr "处理 %s (UsePackage1)时出错" + +#~ msgid "Error occurred while processing %s (NewFileDesc1)" +#~ msgstr "处理 %s (NewFileDesc1)时出错" + +#~ msgid "Error occurred while processing %s (UsePackage2)" +#~ msgstr "处理 %s (UsePackage2)时出错" + +#~ msgid "Error occurred while processing %s (NewFileVer1)" +#~ msgstr "处理 %s (NewFileVer1)时出错" + +#~ msgid "Error occurred while processing %s (NewVersion%d)" +#~ msgstr "处理 %s (NewVersion%d)时出错" + +#~ msgid "Error occurred while processing %s (UsePackage3)" +#~ msgstr "处理 %s (UsePackage3)时出错" + +#~ msgid "Error occurred while processing %s (NewFileDesc2)" +#~ msgstr "处理 %s (NewFileDesc2)时出错" + +#~ msgid "Error occurred while processing %s (FindPkg)" +#~ msgstr "处理 %s (FindPkg)时出错" + +#~ msgid "Error occurred while processing %s (CollectFileProvides)" +#~ msgstr "处理 %s (CollectFileProvides)时出错" + +#~ msgid "Internal error, could not locate member" +#~ msgstr "内部错误，无法定位包内文件" + +#~ msgid "Internal error, group '%s' has no installable pseudo package" +#~ msgstr "内部错误，组 %s 没有可安装的 pseudo 软件包" + +#~ msgid "Release file expired, ignoring %s (invalid since %s)" +#~ msgstr "Release 文件已过期，忽略 %s (从 %s 起无效)" + +#~ msgid "E: Argument list from Acquire::gpgv::Options too long. Exiting." +#~ msgstr "错误：Acquire::gpgv::Options 的参数列表太长。结束运行。" + +#~ msgid "Error occurred while processing %s (NewVersion2)" +#~ msgstr "处理 %s (NewVersion2)时出错" + +#~ msgid "Malformed line %u in source list %s (vendor id)" +#~ msgstr "在源列表中 %2$s 中第 %1$u 行的格式有误(供应商 ID)" + +#~ msgid "Couldn't access keyring: '%s'" +#~ msgstr "无法访问密钥环：“%s”" + +#~ msgid "Could not patch file" +#~ msgstr "无法打开补丁文件" + +#~ msgid " %4i %s\n" +#~ msgstr " %4i %s\n" + +#~ msgid "No source package '%s' picking '%s' instead\n" +#~ msgstr "没有源代码包“%s”，使用“%s”代替\n" + +#~ msgid "%4i %s\n" +#~ msgstr "%4i %s\n" + +#~ msgid "Processing triggers for %s" +#~ msgstr "启动对 %s 的处理" + +#~ msgid "Dynamic MMap ran out of room" +#~ msgstr "动态内存映射(Dynamic MMap)空间不足" + +#~ msgid "" +#~ "Since you only requested a single operation it is extremely likely that\n" +#~ "the package is simply not installable and a bug report against\n" +#~ "that package should be filed." +#~ msgstr "" +#~ "您仅要求对单一软件包进行操作，这极有可能是因为该软件包安装不上，同时，\n" +#~ "您最好提交一个针对这个软件包的故障报告。" + +#~ msgid "Line %d too long (max %lu)" +#~ msgstr "第 %d 行太长了(长度限制为 %lu)。" + +#~ msgid "After unpacking %sB of additional disk space will be used.\n" +#~ msgstr "解压缩后会消耗掉 %sB 的额外空间。\n" + +#~ msgid "After unpacking %sB disk space will be freed.\n" +#~ msgstr "解压缩后将会空出 %sB 的空间。\n" + +#~ msgid "Line %d too long (max %d)" +#~ msgstr "第 %d 行太长了(长度限制为 %d)" + +#~ msgid "Error occured while processing %s (NewFileDesc1)" +#~ msgstr "处理 %s (NewFileDesc1)时出错" + +#~ msgid "Error occured while processing %s (NewFileDesc2)" +#~ msgstr "处理 %s (NewFileDesc2)时出错" + +#~ msgid "Stored label: %s \n" +#~ msgstr "归档文件标签：%s \n" + +#~ msgid "" +#~ "Found %i package indexes, %i source indexes, %i translation indexes and " +#~ "%i signatures\n" +#~ msgstr "" +#~ "找到了 %i 个软件包索引、%i 个源代码包索引，%i 个翻译索引和 %i 个数字签名\n" + +#~ msgid "openpty failed\n" +#~ msgstr "openpty 失败\n" + +#~ msgid "File date has changed %s" +#~ msgstr "文件 %s 的时间已被改动" + +#~ msgid "Reading file list" +#~ msgstr "正在读取文件列表" + +#~ msgid "Could not execute " +#~ msgstr "未能执行 " + +#~ msgid "Preparing for remove with config %s" +#~ msgstr "正在准备连同配置文件的删除 %s" + +#~ msgid "Removed with config %s" +#~ msgstr "连同配置文件一同删除 %s " + +#~ msgid "Unknown vendor ID '%s' in line %u of source list %s" +#~ msgstr "" +#~ "在源列表 %3$s 的第 %2$u 行发现了无法识别的软件提供商 ID (vendor ID) “%1$s”" |