| Age | Commit message (Collapse) | Author |
|---|
|
Commit 299aea924ccef428219ed6f1a026c122678429e6 fixes the problem of
not logging terminal in case stdin & stdout are not a terminal. The
problem is that we are then trying to pass-through stdin content by
reading from the apt-process stdin and writing it to the stdin of the
child (dpkg), which works great for users who can control themselves,
but pipes and co are a bit less forgiving causing us to pass everything
to the first child process, which if the sending part of the pipe is
e.g. 'yes' we will never see the end of it (as the pipe is full at some
point and further writing blocks).
There is a simple solution for that of course: If stdin isn't a terminal,
we us the apt-process stdin as stdin for the child directly (We don't do
this if it is a terminal to be able to save the typed input in the log).
Closes: 773061
|
|
dpkg checks now for dependencies before running triggers, so that
packages can now end up in trigger states (especially those we are not
touching at all with our calls) after apt is done running.
The solution to this is trivial: Just tell dpkg to configure everything
after we have (supposely) configured everything already. In the worst
case this means dpkg will have to run a bunch of triggers, usually it
will just do nothing though.
The code to make this happen was already available, so we just flip a
config option here to cause it to be run. This way we can keep
pretending that triggers are an implementation detail of dpkg.
--triggers-only would supposely work as well, but --configure is more
robust in regards to future changes to dpkg and something we will
hopefully make use of in future versions anyway (as it was planed at the
time this and related options were implemented).
Note that dpkg currently has a workaround implemented to allow upgrades
to jessie to be clean, so that the test works before and after. Also
note that test (compared to the one in the bug) drops the await test as
its is considered a loop by dpkg now.
Closes: 769609
|
|
If we have no controlling terminal opening a terminal will make this
terminal our controller, which is a serious problem if this happens to
be the pseudo terminal we created to run dpkg in as we will close this
terminal at the end hanging ourself up in the process…
The offending open is the one we do to have at least one slave fd open
all the time, but for good measure, we apply the flag also to the slave
fd opening in the child process as we set the controlling terminal
explicitely here.
This is a regression from 150bdc9ca5d656f9fba94d37c5f4f183b02bd746 with
the slight twist that this usecase was silently broken before in that it
wasn't logging the output in term.log (as a pseudo terminal wasn't
created).
Closes: 772641
|
|
Real webservers (like apache) actually send an error page with a 416
response, but our client didn't expect it leaving the page on the socket
to be parsed as response for the next request (http) or as file content
(https), which isn't what we want at all… Symptom is a "Bad header line"
as html usually doesn't parse that well to an http-header.
This manifests itself e.g. if we have a complete file (or larger) in
partial/ which isn't discarded by If-Range as the server doesn't support
it (or it is just newer, think: mirror rotation).
It is a sort-of regression of 78c72d0ce22e00b194251445aae306df357d5c1a,
which removed the filesize - 1 trick, but this had its own problems…
To properly test this our webserver gains the ability to reply with
transfer-encoding: chunked as most real webservers will use it to send
the dynamically generated error pages.
(The tests and their binary helpers had to be slightly modified to
apply, but the patch to fix the issue itself is unchanged.)
Closes: 768797
|
|
Closes: 772913
|
|
Closes: 772678
|
|
Closes: 771982
|
|
Closes: 771967
|
|
|
|
Closes: 771815
|
|
apt-key given a long keyid reports just "OK" all the time, but doesn't
delete the mentioned key as it doesn't find the key.
Note: In debian/experimental this was closed with
29f1b977100aeb6d6ebd38923eeb7a623e264ffe which just added the testcase
as the rewrite of apt-key had fixed this as well.
Closes: 754436
|
|
We run dpkg on its own pty, so we can log its output and have our own
output around it (like the progress bar), while also allowing debconf
and configfile prompts to happen.
In commit 223ae57d468fdcac451209a095047a07a5698212 we changed to
constantly reopening the slave for kfreebsd. This has the sideeffect
though that in some cases slave and master will lose their connection on
linux, so that no output is passed along anymore. We fix this by having
always an fd referencing the slave open (linux), but we don't use it
(kfreebsd).
Failing to get our PTY up and running has many (bad) consequences
including (not limited to, nor all at ones or in any case) garbled ouput,
no output, no logging, a (partial) mixture of the previous items, …
This commit is therefore also reshuffling quiet a bit of the creation
code to get especially the output part up and running on linux and the
logging for kfreebsd.
Note that the testcase tries to cover some cases, but this is an
interactivity issue so only interactive usage can really be a good test.
Closes: 765687
|
|
The fd moves out of scope here anyway, so we should close it properly
instead of leaking it which will tickle down to dpkg maintainer scripts.
Closes: 767774
|
|
Closes: 763033
|
|
Closes: 763379
|
|
Closes: 764055
|
|
Closes: 766170
|
|
Closes: 766755
|
|
Closes: 771039
|
|
|
|
The conversion to accept only relevant options for commands has
forgotten another one, so adding it again even through the usecase might
very well be equally good served by --print-uris.
Closes: 742578
|
|
This used to work before we implemented a stricter commandline parser
and e.g. the dd-schroot-cmd command constructs commandlines like this.
Reported-By: Helmut Grohne
|
|
A version belongs to a section and has hence a section member of its
own. A package on the other hand can have multiple versions from
different sections. This was "solved" by using the section which was
parsed first as order of sources.list defines, but that is obviously a
horribly unpredictable thing.
Users are way better of with the Section() as returned by the version
they are dealing with. It is likely the same for all versions of a
package, but in the few cases it isn't, it is important (like packages
moving from main/* to contrib/* or into oldlibs …).
Backport of 7a66977 which actually instantly removes the member.
|
|
Collect all hashes we can get from the source record and put them into a
HashStringList so that 'apt-get source' can use it instead of using
always the MD5sum.
We therefore also deprecate the MD5 struct member in favor of the list.
While at it, the parsing of the Files is enhanced so that records which
miss "Files" (aka MD5 checksums) are still searched for other checksums
as they include just as much data, just not with a nice and catchy name.
This is a cherry-pick of 1262d35 with some dirty tricks to preserve ABI.
LP: 1098738
|
|
APT supports more than just one HashString and even allows to enforce
the usage of a specific hash. This class is intended to help with
storage and passing around of the HashStrings.
The cherry-pick here the un-const-ification of HashType() compared to
f4c3850ea335545e297504941dc8c7a8f1c83358. The point of this commit is
adding infrastructure for the next one. All by itself, it just adds new
symbols.
Git-Dch: Ignore
|
|
Git-Dch: ignore
|
|
Instead of hardcoding Dpkg::MaxArgBytes find out about it using
the sysconf(_SC_ARG_MAX) call.
|
|
Git-Dch: ignore
|
|
|
|
Regression from merging 801745284905e7962aa77a9f37a6b4e7fcdc19d0 and
b0f4b486e6850c5f98520ccf19da71d0ed748ae4. While fine by itself, merged
the part fixing the filename is skipped if a cdrom source is
encountered, so that our list-cleanup removes what seems to be orphaned
files.
Closes: 765458
|
|
Remove long obsolete (hold, hold-reinstreq, removal-failed) or just
wrong (post-inst-failed vs postinst-failed) values, that have been
autoconverted by dpkg at run-time to their new equivalents, so there
should not be any such instance in any recent system (removal-failed
since dpkg 1.1.4 in Apr 1996, hold and hold-reinstreq since dpkg
1.2.0 in May 1996). dpkg even stopped doing the mapping in 1.15.4
and 1.15.8 respectively.
At the same time sort the list in the same order as they appear in
the dpkg code.
|
|
Instead of using strcat use a C++ std::string to avoid overflowing
this buffer. Thanks to David Garfield
Closes: #76442
|
|
|
|
|
|
|
|
The code is creating a secure temporary directory, but then creates
the changelog alongside the tmpdir in the same base directory. This
defeats the secure tmpdir creation, making the filename predictable.
Inject a '/' between the tmpdir and the changelog filename.
|
|
Because of dpkg-buildflags we already get most of the hardening
features, +all adds -fPIE and ld -z now
Thanks: Simon Ruderich, Markus Waldeck
|
|
Signed-off-by: Trần Ngọc Quân <vnwildman@gmail.com>
|
|
debian/sid
|
|
Git-Dch: Ignore
|
|
The iTFRewritePackageOrder is used in indexcopy to copy and normalize
cdrom Packages files. This change will ensure that there is no
"normalization" that changes MD5sum -> MD5Sum which alters the hash
of the Packages file on disk (oh the irony).
|
|
Skip a reverify for cdrom: sources. The reverify step is actually
harmful here because the apt-cdrom add code uses the indexcopy.cc
which will "normalize" the Packages file from the cdrom when it
writes it to the local disk. This leads to changing the "MD5sum"
field (notice the lower case "s") on the cdrom Packages file to
a "MD5Sum" field on the local file in /var/lib/apt/lists. Which
of course alters the hash and makes apt fail to reverify the file.
|
|
|
|
Git-Dch: Ignore
|
|
The default being 'yes', but this spoils the effort of reproducible
builds for no real gain. (https://wiki.debian.org/ReproducibleBuilds)
|
|
Closes: 762223
|
|
When we do a ReverifyAfterIMS() we use the copy: method to
verify the hashes again. If the user uses -o Dir=./something/relative
this fails because we use the URI class in copy.cc that strips
away the leading relative part. By not using URI this is fixed.
Closes: #762160
|
|
|
|
|
|
|
