summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-03-13remove code duplication for Add & Ident in apt-cdromDavid Kalnischkies
The preparation code to deal with auto-detection and co is the same for both methods, so not sharing them would be bad. Deals also with the prevention of side effects triggered by the auto-detection like disabling mounting for the fallback. Git-Dch: Ignore
2014-03-13apt-cdrom ident shouldn't be interactiveDavid Kalnischkies
Commit 62dcbf84 changed the code of ident to look more like the code for add on my suggestion. This made ident interactive as it starts with a unmount, press enter, mount cycle. The first two are skipped now. This fixes d-i/apt-setup which is using it to get ID as well as label. Closes: 740673
2014-03-13no error for non-existing mountpoints in MountCdromDavid Kalnischkies
The mountpoint might be auto-generated by the mount command so pushing an error on the stack will confuse the following code and let it believe an unrecoverable error occured while potentially everything is okay. Same goes for umount as a non-existing mountpoint is by definition not mounted.
2014-03-13if mountpoint has a ".disk" directory it is mountedDavid Kalnischkies
Checking that parent-directory of mountpoint and mountpoint are on different devices is fine most of the time, but is too restrictive for our testcases and there shouldn't be anything wrong with 'normal' users copying disk-contents around either if they want to. We check for the existance of the ".disk/" directory now as this will not be present if the disk isn't 'mounted'. Disks doesn't need to have such a directory through, so for those we fall back to the old way of detecting mounted or not mounted.
2014-03-13simplify apt-cdrom testcodeDavid Kalnischkies
Git-Dch: Ignore
2014-03-13do not configure already unpacked packages needlesslyDavid Kalnischkies
The unpack of a M-A:same package will force the unpack of all its siblings directly to prevent that they could be separated by later immediate actions. In commit 634985f8 a call to SmartConfigure was introduced to configure these packages at the time the installation order encounters them. Usually, the unpack order is already okay, so that this 'earlier' unpack was not needed and if it wouldn't have been done, the package would now only be unpacked, but by configuring the package now we impose new requirements which must be satisfied. The code is clever enough to handle this most of the time (it worked for 2 years!), but it isn't needed and in very coupled cases this can fail. Removing this call again removes this extra burden and so simplifies the ordering as can be seen in the modified tests. Famous last words, but I don't see a reason for this extra burden to exist hence the remove. Closes: 740843
2014-03-13enable various compiler warningsDavid Kalnischkies
Now that the last few commits resolved the issues we can finally enable a bunch of compiler warnings by default. Git-Dch: ignore
2014-03-13use SPtrArray handling instead of explicit delete[]David Kalnischkies
The warning message from gcc doesn't make that much sense in my reading as there is no loop which could overflow here, but it is better to use our SPtrArray wrapping anyway which fixes the warning as well. warning: cannot optimize loop, the loop counter may overflow [-Wunsafe-loop-optimizations] delete[] Dsc; Git-Dch: Ignore Reported-By: gcc -Wunsafe-loop-optimizations
2014-03-13follow method attribute suggestions by gccDavid Kalnischkies
Git-Dch: Ignore Reported-By: gcc -Wsuggest-attribute={pure,const,noreturn}
2014-03-13cleanup headers and especially #includes everywhereDavid Kalnischkies
Beside being a bit cleaner it hopefully also resolves oddball problems I have with high levels of parallel jobs. Git-Dch: Ignore Reported-By: iwyu (include-what-you-use)
2014-03-13move defines for version to macros.hDavid Kalnischkies
also adds namespaced attributes for good usage Git-Dch: Ignore
2014-03-13warning: unused parameter ‘foo’ [-Wunused-parameter]David Kalnischkies
Reported-By: gcc -Wunused-parameter Git-Dch: Ignore
2014-03-13warning: type qualifiers ignored on function return type [-Wignored-qualifiers]David Kalnischkies
Reported-By: gcc -Wignored-qualifiers Git-Dch: Ignore
2014-03-13warning: cannot optimize loop, the loop counter may overflow ↵David Kalnischkies
[-Wunsafe-loop-optimizations] Git-Dch: Ignore Reported-By: gcc -Wunsafe-loop-optimizations
2014-03-13warning: no previous declaration for foobar() [-Wmissing-declarations]David Kalnischkies
Git-Dch: Ignore Reported-By: gcc -Wmissing-declarations
2014-03-13warning: useless cast to type A [-Wuseless-cast]David Kalnischkies
Git-Dch: Ignore Reported-By: gcc -Wuseless-cast
2014-03-13warning: cast from type A to type B casts away qualifiers [-Wcast-qual]David Kalnischkies
Git-Dch: Ignore Reported-By: gcc -Wcast-qual
2014-03-13StartPos is always positive for http/httpsDavid Kalnischkies
server.cc: In member function ‘bool ServerState::HeaderLine(std::string)’: server.cc:198:72: warning: format ‘%llu’ expects argument of type ‘long long unsigned int*’, but argument 3 has type ‘long long int*’ [-Wformat=] else if (sscanf(Val.c_str(),"bytes %llu-%*u/%llu",&StartPos,&Size) != 2) Git-Dch: Ignore Reported-By: gcc -Wpedantic
2014-03-13warning: extra ‘;’ [-Wpedantic]David Kalnischkies
Git-Dch: Ignore Reported-By: gcc -Wpedantic
2014-03-13warning: non-ISO-standard escape sequence, '\e' [enabled by default]David Kalnischkies
Git-Dch: Ignore Reported-By: gcc -Wpedantic
2014-03-13fix -Wformat= warnings about size_t != %lu on e.g. armelDavid Kalnischkies
Git-Dch: Ignore Reported-By: gcc
2014-03-13fix -Wmissing-field-initializers warningsDavid Kalnischkies
Reported-By: gcc Git-Dch: Ignore
2014-03-13make doxygen more quiet, fix issues and disable latexDavid Kalnischkies
Git-Dch: Ignore
2014-03-13unset LANGUAGE in the testing framework directlyDavid Kalnischkies
Git-Dch: Ignore
2014-03-13support DEB_BUILD_PROFILES and -P for build profilesDavid Kalnischkies
Inspired by the rest of the patch in 661537, but abstract the parsing of various ways of setting the build profiles more so it can potentially be reused and all apt parts have the same behaviour. Especially config options, cmdline options and environment will not be combined as proposed as this isn't APTs usual behaviour and dpkg doesn't do it either, so one overrides the other as it normally does.
2014-03-13implement BuildProfileSpec support as dpkg has in 1.17.2Johannes Schauer
Build-dependencies are now able to include a <profile.foo …> specification limiting usage similar to already supported [arch …]. More details: https://wiki.debian.org/BuildProfileSpec Closes: 661537
2014-03-13add default and override handling for Cnf::FindVectorDavid Kalnischkies
Automatically handle the override of list options via its parent value which can even be a comma-separated list of values. It also adds an easy way of providing a default for the list.
2014-03-13autogenerate makefile for vendor systemDavid Kalnischkies
It can be useful to have a whole makefile available for vendor setup, but by providing a basic one we can deal with the simple cases more easily (and changes to the system are presumably easier).
2014-03-13check version before adding scores in resolverDavid Kalnischkies
Prevents that "old" dependencies have an influence in the scoring. With positive dependencies this is usually not a problem, but negative dependencies can linger around for a long time.
2014-03-13show debug output only if told so in packagemanagerDavid Kalnischkies
Git-Dch: Ignore
2014-03-13do not do the same looping twiceDavid Kalnischkies
Git-Dch: Ignore
2014-03-13propagate a negative score point along breaks/conflictsDavid Kalnischkies
versioned -dev packages like db and boost have the problem of no dependencies which would give them a competitive advantage against an older incarnation of the -dev package, so they tend to be kept back until the old version is removed from the archive, which, if the user has older releases in its sources can take a long time (or never happens). The newer version has a conflicts/breaks against the older one, but the older one hasn't against the newer, so by giving via the conflicts the older one a reduced score the newer one can win if there is no other reason to keep it. If both have a conflict against each other the scoring will cancel itself out, so no harm done. This gives "action" a slightly bigger edge in breaks/conflicts cases than before, but holding back isn't a really good solution anyway.
2014-03-12Promote xz-utils from apt Suggests to libapt-pkg DependsJulian Andres Klode
libapt-pkg depends on the other compressors, and now that xz is the default in many cases, it should depend on that one as well.
2014-03-04l10n: vi.po (624t): Update Vietnamese translationTrần Ngọc Quân
Signed-off-by: Trần Ngọc Quân <vnwildman@gmail.com>
2014-02-28releasing package apt version 0.9.15.50.9.15.5Michael Vogt
2014-02-27initial version of apt-helperMichael Vogt
2014-02-25Bug#739988: Fix autopkgtest missing dependencies and localeMartin Pitt
debian/tests/control: Add missing build-essential, fakeroot, and wget test dependencies. debian/tests/run-tests: Pin locale to C to avoid test failures in other locales.
2014-02-23vendor/tanglu/makefile: add missing clean/sources.listMichael Vogt
2014-02-23releasing package apt version 0.9.15.40.9.15.4Michael Vogt
2014-02-23test/integration/test-ubuntu-bug-346386-apt-get-update-paywall: use ↵Michael Vogt
http-method from METHODSDIR
2014-02-22add missing libdb-dev to debian/tests/controlMichael Vogt
2014-02-22skip test if "apt" is not buildMichael Vogt
2014-02-22fix ADT failure in downloadfile()Michael Vogt
2014-02-22add testcase for Bug#718329Michael Vogt
2014-02-22debian: Add debDebFile::ExtractTarMember to the symbols fileGuillem Jover
2014-02-22Add support for data.tar, control.tar and control.tar.xzGuillem Jover
Sync the deb(5) format support with latest dpkg, by allowing uncompressed tar members and xz compressed control.tar. This also refactors the control.tar member extraction by using ExtractTarMember(), which also means future changes only need to be implemented in a single place.
2014-02-22DebFile: Refactor ExtractTarMember() out from ExtractArchive()Guillem Jover
Generalize DebFile::ExtractArchive() to take a member base name, so that we can reuse it for control.tar member extraction too.
2014-02-22ExtractTar: Allow an empty decompressor programGuillem Jover
This allows for uncompressed tar files, as the decompressor process will not get interposed in-between the file descriptors.
2014-02-22add apt-vendor information for tangluJon Severinsson
2014-02-22Fix typos in documentation (codespell)Michael Vogt