| Age | Commit message (Collapse) | Author |
|---|
|
The file isn't supposed to be a valid config file, but it should
show valid syntax non-the-less.
Git-Dch: Ignore
|
|
With the selfgrown splitting we got the problem of not recovering
from networks which just reply with invalid data like those sending
us login pages to authenticate with the network (e.g. hotels) back.
The good thing about the InRelease file is that we know that it must
be clearsigned (a Release file might or might not have a detached sig)
so if we get a file but are unable to split it something is seriously
wrong, so there is not much point in trying further.
The Acquire system already looks out for a NODATA error from gpgv,
so this adds a new error message sent to the acquire system in case
the splitting we do now ourselves failed including this magic word.
Closes: #712486
|
|
Git-Dch: Ignore
|
|
we have a test which required traditionally lighttpd to be executed
as it requires a webserver supporting some kind of URI rewriting.
Now with some lines of code our own webserver can do this and the
testcase can be enabled by default. This test hinted at the bug fixed
in the previous commit, so having more tests which can easily be run
is a good thing.
Git-Dch: Ignore
|
|
Before we download the 'new' InRelease file the old file will be moved
out of the way with the name 'foobar_InRelease.reverify', so if no
partial file for the 'new' file exists take the modification time from
this reverify file, so that if we get an IMS hit for the InRelease file
we can move back the reverify file as new file rather than downloading
the 'new' file even though we already have it.
We do the same for Release files and this happened to work until the
reverify renaming was corrected for InRelease files.
|
|
Git-Dch: Ignore
|
|
APT needs to acquire data in a secure fashion over an inherently
unsecure way, known as the internet, while communicating with
unreliable partners, known as webservers and proxies.
For your integration tests we so far relied on 'normal' webservers,
but all of them have certain quirks and none is able to provide us
with all quirks which can be observed in the wild and we therefore
have to test with, so this webserver isn't trying to be fast, secure
or feature complete, but to provide all the quirks we need in a
consistent way.
This webserver also makes the APT project self-contained, as it is now
able to generate, serve as well as acquire package indexes. ;)
Git-Dch: Ignore
|
|
|
|
The default is to ask udev for location and mountpoints of CD-ROMs,
but the old way of specifying the mountpoint is still available and
is tried now in case udev doesn't find any CD-ROM.
It probably fails, too, but we get a bunch of error messages this
way and the user can get an idea of how to make his setup work even
if udev can't be convienced to return something useful.
Closes: #712433
|
|
do not blindly assume that all packages stanzas have a "Description:"
field in 'apt-cache show' as well as in the cache creation itself.
We instead assume now that if the stanza has a Description, it will not
be the first field as we look out for "\nDescription" to take care of
MD5sum as well as (maybe ignored) translated Descriptions embedded in
the package stanza.
Closes: #712435
|
|
Closes: #711921
|
|
Can't be used as a test as is, but shows how to build multiple
CD-ROMs for tests and can be used to reproduce debbug #711456.
Git-Dch: Ignore
|
|
We do the same in the acquire system which handles the 'normal'
downloads, so do it here as well even though its unlikely anyone
will ever notice (beside testcases of course …)
|
|
Testing for global PendingErrors in users of CopyFile is incorrect
in so far as unrelated errors will prevent us from copying perfectly
fine files and checking for the validity of the files is just better
in CopyFiles as it already checks if files are at least opened.
Add also a higher-level error message to the error stack if it fails.
|
|
The buildsystem tried to build l10n for test applications which never
produced the output it expected causing it to try building it all the
time.
|
|
fixing parallel build in the handcrafted buildsystem is a pain,
so its not enabled by default, but its works for me – sometimes
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
For testcases it might sometimes be handy to add trap-actions
before the general cleanup, e.g. if it has set directories read-
only which rm doesn't want to remove even with --force applied
(its fine with files though)
Git-Dch: Ignore
|
|
OpenInternDescriptor failures would cause additional errors to be
generated by double-closing an fd. Other errors (although these
are generated if the method is used incorrectly, so unlikely)
didn't close the fd aswell.
Closes: 704608
|
|
The default constructor of the FileFd will kick in anyway,
which will know that the Fd is invalid while with this explicit
call it must be assumed that the fd is in fact valid, which
might generate errors in the future
|
|
Previously some errors would set the Fail flag while some didn't
without a clear reason as all errors leave a bad FileFd behind,
so we use a helper now to ensure that all errors set the flag.
|
|
Git-Dch: Ignore
|
|
Patterns can appear in the name as well as in the description,
they don't have to match all in the name/description only.
Closes: 691453
|
|
Git-Dch: Ignore
|
|
In the past packages were flagged "Protected" so that install/
remove markings where issued before the ProblemResolver.
Nowadays, the marking methods check if they are allowed to modify
the marking of a package instead, so that markings set by FromUser
calls are not overwritten anymore by automatic calls which elimates
the need for InstallProtect which just eats CPU now.
The method itself is left untouched for now in case frontend needs it
still for some wierd usecase, but they should be eliminated.
|
|
Splits the big loop over dependencies in SmartConfigure which unpacks and
configures dependencies into two loops and reverse their order, so that all
dependencies which need to be unpacked are handled first and only after that
configures are issued for dependencies.
This is needed as otherwise the unpack of a (new) dependency will be issued
in between a configure call for two (or more) packages which form a loop,
which means the configure calls aren't part of the same dpkg call and
therefore dpkg bails out.
Such tight loops should really be avoided as they are usually wrong – and in
reality the dependencies in libreoffice were greatly simplified thanks to
Rene Engelhard so the problem is gone for the benefit of all.
Closes: 707578
|
|
|
|
Used to work until a certain (here unnamed) person came along and used
the wrong operator causing low-priority packages to be sorted above
high-priority packages while choosing a provider in commit
2b5c35c7bb915dbd46fefd7c79f05364ba22f93b from Nov 2011
|
|
Doing Removes early is good to have them out of the way, so they
don't break 'Inst' or 'Conf' chains, but scoring them above Essentials
means that we end up upgrading (many) less important packages before
we handle big stuff like libc6 or debconf which not only fails if those
less important packages have unannounced (strict) dependencies, but also
leads to having these packages unconfigured for a long time triggering
bugs in maintainer scripts for no good reason (#708831).
So this commits sets the default value for remove scores to 100, which
is below the one for essentials (200) and a lot lower than the previous
default value (500).
|
|
Some squeeze → wheezy upgrades indicate that DepRemove runs amok
in complicated setups as it wasn't correctly working with or-groups.
Completely rewritten the check is now moving from or-group to or-group
instead.
The behavior should be the same as the code before, but
(hopefully) with less bugs and more comments.
Closes: 645713
|
|
Building src:apt shows:
dpkg-shlibdeps: warning: package could avoid a useless dependency if
debian/apt/usr/lib/apt/methods/cdrom was not linked against libdl.so.2
(it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if
debian/apt/usr/bin/apt-get was not linked against libutil.so.1 (it uses
none of the library's symbols)
|
|
Building manpages becames more consistent this way and
it is simpler to ignore build artefacts, too.
|
|
adding some comments, regrouping files and use some patterns to avoid
updating the ignore file for new translations or abi changes
Git-Dch: Ignore
|
|
|
|
|
|
|
|
* Fix double free (closes: #711045)
* Fix crash when the "mirror" method does not find any entry
(closes: #699303)
|
|
|
|
|
|
|
|
- fix build failure when building without NLS (closes: #671587)
|
|
|
|
|
|
|
|
Use the canonical URLs. Rename Vcs-Bzr to Vcs-Git and use the more
efficient git protocol instead of http. Point Vcs-Browser to the
gitweb interface.
|
|
|
|
|
|
|
|
|
|
|
