summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-04-19use SHA2 unrolled code as its a bit fasterDavid Kalnischkies
Upstream claims its faster if combined with an optimizing compiler and I can confirm that in some tests, so lets see how it works out in practice. Git-Dch: Ignore
2015-04-19handle servers closing encoded connections correctlyDavid Kalnischkies
Servers who advertise that they close the connection get the 'Closes' encoding flag, but this conflicts with servers who response with a transfer-encoding (e.g. encoding) as it is saved in the same flag. We have a better flag for the keep-alive (or not) of the connection anyway, so we check this instead of the encoding. This is in practice not much of a problem as real servers we talk to are HTTP1.1 servers (with keep-alive) and there isn't much point in doing chunked encoding if you are going to close anyway, but our simple testserver stumbles over this if pressed and its a bit cleaner, too. Git-Dch: Ignore
2015-04-19send Alt-* info for uncompressed based on any compressionsDavid Kalnischkies
file sends information about the uncompressed file if it can find it as well as for the compressed file. This was done only for gzip so far, but we support more compression types. That this information isn't used a lot is a different story. Git-Dch: Ignore
2015-04-19remove duplicated check for same file copyDavid Kalnischkies
Git-Dch: Ignore
2015-04-19improve https method queue progress reportingDavid Kalnischkies
The worker expects that the methods tell him when they start or finish downloading a file. Various information pieces are passed along in this report including the (expected) filesize. https was using a "global" struct for reporting which made it 'reuse' incorrect values in some cases like a non-existent InRelease fallbacking to Release{,.gpg} resulting in a size-mismatch warning. Reducing the scope and redesigning the setting of the values we can fix this and related issues. Closes: 777565, 781509 Thanks: Robert Edmonds and Anders Kaseorg for initial patchs
2015-04-19do not unlink https file on general errorDavid Kalnischkies
It might be quite interesting which file (content) made curl freak out and other methods keep the file around as well. Git-Dch: Ignore
2015-04-19demote missing gtest to a buildtime warningDavid Kalnischkies
We just need it for unit tests and our debian/rules file actually skips calling them if nocheck is given… but this fails anyhow as we declared a hard-dependency on it. Demoting the error to a warning in configuration and adding a test in the 'make test' path with a friendly message allows nocheck to be useful again. (Running unit tests is fully encouraged of course, but bootstrappers and co do not need to be burdened with this stuff)
2015-04-10test for or-group choice behaviour in upgradeDavid Kalnischkies
In #780028 we were discussing how the or-group order should be more important than keep-back decisions of 'upgrade'. We have this behaviour, but to ensure it stays this way lets add a test for it. Git-Dch: Ignore
2015-04-10add a simple unit test for acquire progressDavid Kalnischkies
This isn't testing much of the 'complex' parts, but its better than nothing for now. Git-Dch: Ignore
2015-04-10reimplement the last uses of sprintfDavid Kalnischkies
Working with strings c-style is complicated and error-prune, so by converting to c++ style we gain some simplicity and avoid buffer overflows by later extensions. Git-Dch: Ignore
2015-03-16stop displaying time of build in online helpJérémy Bobbio
As part of the “reproducible builds” effort [1], we have noticed that apt could not be built reproducibly. One issue is that it uses the __DATE__ and __TIME__ macros of the C preprocessor to display the time of build in the online help. We believe this information not to be really useful to users as they can always look at the package data and metadata to figure it out. The attached patch simply removes this information. All non-documentation packages can then be built reproducibly with our current experimental framework. [David: changed the string slightly to be untranslateable as well] Closes: 774342
2015-03-16Italian manpage translation updateBeatrice Torracca
Closes: 776702
2015-03-16test exitcode as well as string equalityDavid Kalnischkies
We use test{success,failure} now all over the place in the framework, so its only consequencial to do this in the situations in which we test for a specific output as well. Git-Dch: Ignore
2015-03-16parse arch-qualified Provides correctlyHelmut Grohne
The underlying problem is that libapt-pkg does not correctly parse these provides. Internally, it creates a version named "baz:i386" with architecture amd64. Of course, such a package name is invalid and thus this version is completely inaccessible. Thus, this bug should not cause apt to accept a broken situation as valid. Nevertheless, it prevents using architecture qualified depends. Closes: 777071
2015-03-16set version before updating po filesDavid Kalnischkies
This way the 'correct' version is carried over into the po files to reflect which version they were built for rather than the version before the current one. Git-Dch: Ignore
2015-03-16(error) Same iterator is used with different containersDavid Kalnischkies
cppcheck reports this error, its not really a problem for us as the API can actually deal with it via implicit conversion, but being explicit can't hurt and the less reported errors the better. Git-Dch: Ignore
2015-03-16fix some new compiler warnings reported by gcc-5David Kalnischkies
Git-Dch: Ignore
2015-03-16properly implement pkgRecord::Parser for *.deb filesDavid Kalnischkies
Implementing FileName() works for most cases for us, but other frontends might need more and even for us its not very stable as the normal Jump() implementation is pretty bad on a deb file and produce errors on its own at times. So, replacing this makeshift with a complete implementation by mostly just shuffling code around.
2015-03-16fix another d(e)select-upgrade typoDavid Kalnischkies
You would think one instance of this is enough, but 80e8d923ebc8d5f3f84eb3f922b28ca309c25026 wasn't as globally applied as the commit message suggested… LP: #1399037
2015-03-16derive more of https from http methodDavid Kalnischkies
Bug #778375 uncovered that https wasn't properly integrated in the class family tree of http as it was supposed to be leading to a NULL pointer dereference. Fixing this 'properly' was deemed to much diff for practically no gain that late in the release, so commit 0c2dc43d4fe1d026650b5e2920a021557f9534a6 just fixed the synptom, while this commit here is fixing the cause plus adding a test.
2015-03-16merge debian/sid into debian/experimentalDavid Kalnischkies
2015-03-08rework dpkg-wrapping in test frameworkDavid Kalnischkies
We are able to run maintainer scripts if needed before, but we need to set ADMINDIR to be able to call dpkg tools like dpkg-trigger inside of them. Git-Dch: Ignore
2015-02-23releasing package apt version 1.0.9.71.0.9.7Michael Vogt
2015-02-23Fix crash in the apt-transport-https when Owner is NULLTomasz Buchert
Do not crash in ServerState::HeaderLine if there is no Owner. Closes: #778375
2015-01-16releasing package apt version 1.0.9.6Michael Vogt
2015-01-16prepare 1.0.9.61.0.9.6Michael Vogt
2015-01-10award points for positive dependencies againDavid Kalnischkies
Commit 9ec748ff103840c4c65471ca00d3b72984131ce4 from Feb 23 last year adds a version check after 8daf68e366fa9fa2794ae667f51562663856237c added 8 days earlier negative points for breaks/conflicts with the intended that only dependencies which are satisfied propagate points (aka: old conflicts do not). The implementation was needlessly complex and flawed through preventing positive dependencies from gaining points like they did before these commits making library transitions harder instead of simpler. It worked out anyhow most of the time out of pure 'luck' (and other ways of gaining points) or got miss attributed to being a temporary hick-up. Closes: 774924
2015-01-10128 KiB DSC files ought to be enough for everyoneDavid Kalnischkies
Your mileage may vary, but don't worry: There is more than one way to do it, but our one size fits all is not a bigger hammer, but an entire roundhouse kick! So brace yourself for the tl;dr: The limit is gone.* Beware: This fixes also the problem that a double newline is unconditionally added 'later' which is an overcommitment in case the dsc filesize is limit-2 <= x <= limit. * limited to numbers fitting into an unsigned long long. Closes: 774893
2015-01-06Add regression test for the previous commitMichael Vogt
The issue was that https.cc never called URIStart(), one way to detect this is that no download progress is generated without this call. The test now checks for this and as a side-effect will also ensure that we do not break download progress reporting and Acquire::{http,https}::Dl-Limit accidently.
2015-01-05Fix missing URIStart() for https downloadsMichael Vogt
Add a explicit ReceivedData to HttpsMethod that indicates when we got data from the connection so that we can send URISTart() to the parent. This is needed because URIStart got moved in f9b4f12d from the progress_callback to write_data() and it only checks for Res.Size. In the old code if progress_callback is called by libcurl (and sets Res.Size) before write_data is called then URIStart() is never send. Making this a explicit ReceivedData variable fixes this issue.
2014-12-23release 1.0.9.51.0.9.5David Kalnischkies
2014-12-23tighten filtering of kernel images in apt.auto-removalJames McCoy
The current filtering matches the names of the image metapackages on the i386 architecture: $ dpkg-query -l | awk '/^ii[ ]+(linux|kfreebsd|gnumach)-image-[0-9]/ && $2 !~ /-dbg$/ { print $2 }' linux-image-3.16.0-4-586 linux-image-586 This results in an extra image package being removed from APT::NeverAutoRemove, losing the intended effect of keeping the {current, previous, latest} set of images installed. Requiring a “.” in the package name tightens the matched package names to those that are installing a specific version of the image, thus eliding the meta-packages. Closes: 772732
2014-12-23pass-through stdin fd instead of content if not a terminalDavid Kalnischkies
Commit 299aea924ccef428219ed6f1a026c122678429e6 fixes the problem of not logging terminal in case stdin & stdout are not a terminal. The problem is that we are then trying to pass-through stdin content by reading from the apt-process stdin and writing it to the stdin of the child (dpkg), which works great for users who can control themselves, but pipes and co are a bit less forgiving causing us to pass everything to the first child process, which if the sending part of the pipe is e.g. 'yes' we will never see the end of it (as the pipe is full at some point and further writing blocks). There is a simple solution for that of course: If stdin isn't a terminal, we us the apt-process stdin as stdin for the child directly (We don't do this if it is a terminal to be able to save the typed input in the log). Closes: 773061
2014-12-23always run 'dpkg --configure -a' at the end of our dpkg callingsDavid Kalnischkies
dpkg checks now for dependencies before running triggers, so that packages can now end up in trigger states (especially those we are not touching at all with our calls) after apt is done running. The solution to this is trivial: Just tell dpkg to configure everything after we have (supposely) configured everything already. In the worst case this means dpkg will have to run a bunch of triggers, usually it will just do nothing though. The code to make this happen was already available, so we just flip a config option here to cause it to be run. This way we can keep pretending that triggers are an implementation detail of dpkg. --triggers-only would supposely work as well, but --configure is more robust in regards to future changes to dpkg and something we will hopefully make use of in future versions anyway (as it was planed at the time this and related options were implemented). Note that dpkg currently has a workaround implemented to allow upgrades to jessie to be clean, so that the test works before and after. Also note that test (compared to the one in the bug) drops the await test as its is considered a loop by dpkg now. Closes: 769609
2014-12-23do not make PTY slave the controlling terminalDavid Kalnischkies
If we have no controlling terminal opening a terminal will make this terminal our controller, which is a serious problem if this happens to be the pseudo terminal we created to run dpkg in as we will close this terminal at the end hanging ourself up in the process… The offending open is the one we do to have at least one slave fd open all the time, but for good measure, we apply the flag also to the slave fd opening in the child process as we set the controlling terminal explicitely here. This is a regression from 150bdc9ca5d656f9fba94d37c5f4f183b02bd746 with the slight twist that this usecase was silently broken before in that it wasn't logging the output in term.log (as a pseudo terminal wasn't created). Closes: 772641
2014-12-22dispose http(s) 416 error page as non-contentDavid Kalnischkies
Real webservers (like apache) actually send an error page with a 416 response, but our client didn't expect it leaving the page on the socket to be parsed as response for the next request (http) or as file content (https), which isn't what we want at all… Symptom is a "Bad header line" as html usually doesn't parse that well to an http-header. This manifests itself e.g. if we have a complete file (or larger) in partial/ which isn't discarded by If-Range as the server doesn't support it (or it is just newer, think: mirror rotation). It is a sort-of regression of 78c72d0ce22e00b194251445aae306df357d5c1a, which removed the filesize - 1 trick, but this had its own problems… To properly test this our webserver gains the ability to reply with transfer-encoding: chunked as most real webservers will use it to send the dynamically generated error pages. (The tests and their binary helpers had to be slightly modified to apply, but the patch to fix the issue itself is unchanged.) Closes: 768797
2014-12-22Thai program translation updateTheppitak Karoonboonyanan
Closes: 772913
2014-12-22Japanese program translation updateKenshi Muto
Closes: 772678
2014-12-22Chinese (simplified) program translation updateZhou Mo
Closes: 771982
2014-12-22French manpages translation updateJean-Pierre Giraud
Closes: 771967
2014-12-10do not make PTY slave the controlling terminalDavid Kalnischkies
If we have no controlling terminal opening a terminal will make this terminal our controller, which is a serious problem if this happens to be the pseudo terminal we created to run dpkg in as we will close this terminal at the end hanging ourself up in the process… The offending open is the one we do to have at least one slave fd open all the time, but for good measure, we apply the flag also to the slave fd opening in the child process as we set the controlling terminal explicitely here. This is a regression from 150bdc9ca5d656f9fba94d37c5f4f183b02bd746 with the slight twist that this usecase was silently broken before in that it wasn't logging the output in term.log (as a pseudo terminal wasn't created). Closes: 772641
2014-12-09dispose http(s) 416 error page as non-contentDavid Kalnischkies
Real webservers (like apache) actually send an error page with a 416 response, but our client didn't expect it leaving the page on the socket to be parsed as response for the next request (http) or as file content (https), which isn't what we want at all… Symptom is a "Bad header line" as html usually doesn't parse that well to an http-header. This manifests itself e.g. if we have a complete file (or larger) in partial/ which isn't discarded by If-Range as the server doesn't support it (or it is just newer, think: mirror rotation). It is a sort-of regression of 78c72d0ce22e00b194251445aae306df357d5c1a, which removed the filesize - 1 trick, but this had its own problems… To properly test this our webserver gains the ability to reply with transfer-encoding: chunked as most real webservers will use it to send the dynamically generated error pages. Closes: 768797
2014-12-07always run 'dpkg --configure -a' at the end of our dpkg callingsDavid Kalnischkies
dpkg checks now for dependencies before running triggers, so that packages can now end up in trigger states (especially those we are not touching at all with our calls) after apt is done running. The solution to this is trivial: Just tell dpkg to configure everything after we have (supposely) configured everything already. In the worst case this means dpkg will have to run a bunch of triggers, usually it will just do nothing though. The code to make this happen was already available, so we just flip a config option here to cause it to be run. This way we can keep pretending that triggers are an implementation detail of dpkg. --triggers-only would supposely work as well, but --configure is more robust in regards to future changes to dpkg and something we will hopefully make use of in future versions anyway (as it was planed at the time this and related options were implemented). Closes: 769609
2014-12-07correct architecture detection for 'rc' packages for purgeDavid Kalnischkies
We were already considering these cases, but the code was flawed, so that packages changing architectures are incorrectly handled and hence the wrong architecture is used to call dpkg with, so that dpkg says the package isn't installed (which it isn't for the requested architecture). Closes: 770898
2014-12-07properly handle already reinstall pkgs in orderingDavid Kalnischkies
The bugreport itself describes the case of the ordering code detecting a loop where none is present, but the testcase finds also cases in which there is actually a loop and we fail to realize it. --reinstall can be considered an interactive command through and it usually doesn't encounter such "hard" problems (= looping essentials), so this is less serious than it sounds at first. Closes: 770291
2014-12-03release 1.0.9.41.0.9.4David Kalnischkies
2014-12-03Spanish program translation updateManuel "Venturi" Porras Peralta
Closes: 771815
2014-11-28support long keyids in "apt-key del" instead of ignoring themJames McCoy
apt-key given a long keyid reports just "OK" all the time, but doesn't delete the mentioned key as it doesn't find the key. Note: In debian/experimental this was closed with 29f1b977100aeb6d6ebd38923eeb7a623e264ffe which just added the testcase as the rewrite of apt-key had fixed this as well. Closes: 754436
2014-11-28fix PTY interaction on linux and kfreebsdDavid Kalnischkies
We run dpkg on its own pty, so we can log its output and have our own output around it (like the progress bar), while also allowing debconf and configfile prompts to happen. In commit 223ae57d468fdcac451209a095047a07a5698212 we changed to constantly reopening the slave for kfreebsd. This has the sideeffect though that in some cases slave and master will lose their connection on linux, so that no output is passed along anymore. We fix this by having always an fd referencing the slave open (linux), but we don't use it (kfreebsd). Failing to get our PTY up and running has many (bad) consequences including (not limited to, nor all at ones or in any case) garbled ouput, no output, no logging, a (partial) mixture of the previous items, … This commit is therefore also reshuffling quiet a bit of the creation code to get especially the output part up and running on linux and the logging for kfreebsd. Note that the testcase tries to cover some cases, but this is an interactivity issue so only interactive usage can really be a good test. Closes: 765687
2014-11-28close leaking slave fd after setting up pty magicDavid Kalnischkies
The fd moves out of scope here anyway, so we should close it properly instead of leaking it which will tickle down to dpkg maintainer scripts. Closes: 767774