summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-12-14test framework: Unset http proxy variables in setupenvironmentJulian Andres Klode
This breaks a lot of test cases Gbp-Dch: ignore
2015-12-14test framework: Correctly generate new paths in noopchrootJulian Andres Klode
The allocated buffer was one byte too small. Allocate a buffer of PATH_MAX instead and use snprintf(), as suggested by Martin Pitt.
2015-12-14test-apt-download-progress: Limit rate to 600kJulian Andres Klode
This reduces the chance that the test fails. Gbp-Dch: ignore
2015-12-14test-apt-download-progress: Allow smaller progress changeJulian Andres Klode
Instead of checking for [10%, 100%), check for (0%, 100%), that is everything < 100% and >0%. Gbp-Dch: ignore
2015-12-14test-sourceslist-lang-plusminus-options: Use amd64 architectureJulian Andres Klode
This should make the test work on non-amd64 systems Gbp-Dch: ignore
2015-12-14tests: Depend on libfile-fcntllock-perl to shut up dpkg-gencontrolJulian Andres Klode
Ubuntu's autopkgtest server always prints dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe which is somewhat annoying. Work around that by depending on that perl stuff for the test suite. Gbp-Dch: ignore
2015-12-14non-existing directories don't need to be cleanedDavid Kalnischkies
Trying to clean up directories which do not exist seems rather silly if you think about it, so let apt think about it and stop it. Depends a bit on the caller if this is fixing anything for them as they might try to acquire a lock or doing other clever things as apt does. Closes: 807477
2015-12-14support regex and co in 'apt-cache policy $pkg' againDavid Kalnischkies
Regression of 1e064088bf7b3e29cd36d30760fb3e4143a1a49a (1.1~exp4) which moved code around and renamed methods heavily ending up calling the wrong method matching packagenames only instead of calling the full array. Most commands work with versions, so this managed to fly under the radar for quite a while. Closes: 807870
2015-12-14show a more descriptive error for weak Release filesDavid Kalnischkies
If we can't work with the hashes we parsed from the Release file we display now an error message if the Release file includes only weak hashes instead of downloading the indexes and failing to verify them with "Hash Sum mismatch" even through the hashes didn't mismatch (they were just weak). If for some (unlikely) reason we have got weak hashes only for individual targets we will show a warning to this effect (again, befor downloading and failing the index itself). Closes: 806459
2015-12-14redirect which stderr to /dev/null for consistencyDavid Kalnischkies
The "standard" which (debianutils) has no output whatsoever on stderr, bash and dash which use this implementation therefore haven't either. In zsh 'which' is a shell built-in – and has no stderr output either, it does print an error message on stdout… So, realistically, a redirection isn't needed at all, but it also can't hurt (<- I have said that before in this context ->) so why not for consistency with… well, not with "command -v" as that hasn't an error message either. Lets say for consistency with my mental image of shell, as I am still a bit puzzled by zsh's which and now could imagine even more strange things in other shells. Closes: 807373
2015-12-14mention APT::AutoRemove::{Recommends,Suggests}Important optionAndreas Metzler
Closes: 807413
2015-12-14fix incorrect Korean translation of "manually" and "automatically"Seo Sanghyeon
Korean translation update is attached. I downloaded the original from https://www.debian.org/international/l10n/po/ko. Originally, "manually" and "automatically" were translated same, which was confusing. Mail-Reference: <CAPrzcnL_YynHQkCSE4xH29eW1O0Q6SPhoSf21KOFTu=Vv6-0Nw@mail.gmail.com> Mail-Archive: https://lists.debian.org/deity/2015/12/msg00108.html
2015-12-13parse .diff/Index hashes in reverse orderDavid Kalnischkies
Reversing the parsing order ensures that we parse weaker hashes (like SHA1) before we touch newer/stronger hashes (like SHA256) as the weaker ones will usually be there for a longer time already with data already present, which we would discard if we start with the strong one first. The discarding is visible in the debug logs: File X wasn't in the list for the first parsed hash! (history) File X wasn't in the list for the first parsed hash! (patches) which if file X is part of the patch-path means apt will not find a path and fallback to acquire the whole file instead needlessly. If file X isn't part of the patch-path that is no problem, so that effects only the update-call which updates with patches coming from before and after the addition of a new hash.
2015-12-13fix typos and docs in GlobalError documentationDavid Kalnischkies
Reported-By: Manuel A. Fernandez Montecelo <mafm@debian.org> Git-Dch: Ignore
2015-12-13update symbols files to 1.1.4 state of affairsDavid Kalnischkies
2015-12-13check library was built before comparing with symbols fileDavid Kalnischkies
Git-Dch: Ignore
2015-12-11.travis.yml: Switch to new trusty machinesJulian Andres Klode
Yay, newer server Gbp-Dch: ignore
2015-12-11mmap: Define _DEFAULT_SOURCE instead of _BSD_SOURCEJulian Andres Klode
Fixes a warning reported by gcc. Gbp-Dch: ignore
2015-12-11apt-internal-solver: Make ShowHelp() and GetCommands() staticJulian Andres Klode
This fixes a warning reported by gcc. Gbp-Dch: ignore
2015-12-11Bump cache minor version to 2 to trigger rebuildsJulian Andres Klode
With the package names now normalized to lower case, the caches of affected systems need to be rebuild. Adjust the minor version to trigger such a rebuild. Gbp-Dch: ignore
2015-12-11Convert package names from Packages files to lower caseJulian Andres Klode
dpkg does that when reading package files, so we should do the same. This only deals with parsing names from binary package paragraphs, it does not look at source package names and/or the list of binaries in a dsc file. Closes: #807012
2015-12-11test: Fix testcases relying on mixed case package namesJulian Andres Klode
Gbp-Dch: ignore
2015-12-10Do not swap required and important in pkgCache::Priority()Julian Andres Klode
required and important were swapped, leading to wrong output. Closes: #807523 Thanks: Manuel A. Fernandez Montecelo for discovering this
2015-12-07Release 1.1.41.1.4Julian Andres Klode
2015-12-07Use 0llu instead of 0ull in one place tooJulian Andres Klode
Gbp-Dch: ignore
2015-12-07Avoid overflow when summing up file sizesJulian Andres Klode
We need to pass 0llu instead of 0 as the init value, otherwise std::accumulate will calculate with ints. Reported-by: Raphaël Hertzog
2015-12-07part revert, part redo 'which' replacementDavid Kalnischkies
In e75e5879 'replace "which" with "command -v" for portability' I missed that command -v isn't actually required to be available in debian, so for the 5 files we are using it: Two (abicheck/run_abi_test & test/integration/framework) are called in environments were I believe sh is at least dash or 'better' as the first one is "interactive" for apt developers and the later is sourced by ~200 tests in the same directory run by hand and ci-services – for the later we have pulled some uglier hacks for worser things already, so if there should actually end up needing something more compatible we will notice eventually (and the later actually had a command -v call for some time already and nobody came running). debian/rules and debian/apt.cron.daily I switched back to which as that is more or less debian-specific or at least highly non-critical. That leaves cmdline/apt-key.in with a bunch of calls where I will implement that functionality in shell as this is relatively short-lived as it is used to detect wget (for net-update, which Michael wants to revive and in that process will properly use apt-helper instead of wget) and to detect gpg vs. gpg2 systems, where the earlier is supposed to go away in the longrun (or the later, but by replacing the earlier…). [and this gpg/gpg2 detection is new in sid, so I have some sympathy for that being a problem now.] Thanks: Jakub Wilk for pointing out #747320
2015-12-06replace run-parts with find|sort to avoid debianutils usageDavid Kalnischkies
After e75e5879 the reason for an implicit dependency on debianutils (which is essential for debian, but likely not on other systems) was just two uses of run-parts, which can be replaced with the a lot more portable find-piped-into-sort duo.
2015-12-06replace "which" with "command -v" for portabilityDavid Kalnischkies
which is a debian specific tool packaged in debianutils (essential) while command is a shell builtin defined by POSIX. Closes: 807144 Thanks: Mingye Wang for the suggestion.
2015-12-06apt-helper.cc: include <stdlib.h> for atoiFredrik Fornwall
Include <stdlib.h> to ensure that atoi(3) is defined to improve general portability and fix a specific build failure on Android. Closes: 807031
2015-12-02use @CHANGEPATH@ as placeholder in changelog URI templatesDavid Kalnischkies
This should make it more obvious that CHANGEPATH is a placeholder which apt will replace with a package specific path rather than a string constant. Mail-Reference: <87d1upgvaf.fsf@deep-thought.43-1.org> Mail-Archive: https://lists.debian.org/debian-dak/2015/12/msg00005.html
2015-12-02tests: apt build-dep actually reports no depends correctlyDavid Kalnischkies
'Regression' of 7d19ee92f2368a40e739cb27d22d6d28f37ebf45, just that it now works more as expected than previously. Of course, build-essentials are implicitly also build dependencies, so by definition all packages have build dependencies, but that isn't what this message wants to say and it isn't what the user expects. Git-Dch: Ignore
2015-12-01require explicit paths to dsc/control as we do for deb filesDavid Kalnischkies
Otherwise a user is subject to unexpected content-injection depending on which directory she happens to start apt in. This also cleans up the code requiring less implementation details in build-dep which is always good. Technically, this is an ABI break as we override virtual methods, but that they weren't overridden was a mistake resulting in pure classes, which shouldn't be pure, so they were unusable – and as they are new in 1.1 nobody is using them yet (and hopefully ever as they are borderline implementation details). Closes: 806693
2015-12-01deal with configured build-essential firstDavid Kalnischkies
There is no need to check configured build-essentials for each package, doing it once at the start ought to be enough. Git-Dch: Ignore
2015-12-01split build-dep satisfier loop out of DoBuildDepDavid Kalnischkies
Lets do this non-behaviour change before we modify the source for real as the reflow and moving would otherwise hide all the interesting changes. Git-Dch: Ignore
2015-12-01add a apt breaks (apt-utils << 1.1.3) for partial-upgradesDavid Kalnischkies
You could think a0bf789783ea283914d059aea0f4d0f77d6bbaaf would be enough, but it turns out its only half of the puzzle. Closes: 806765 Suggested-By: Julian Andres Klode <jak@debian.org>
2015-11-30defaults.mak: Set LC_COLLATE=C.UTF-8 for reproducible sort orderJulian Andres Klode
With the 1.1.3 release we have seen some re-ordering of the translation template and the translations. It turns out that this is because sort sorts differently depending on the locale, so let's force it to always sort in the C locale.
2015-11-30release 1.1.31.1.3Michael Vogt
Git-dch: ignore
2015-11-29add apt-utils Depends apt (= ${binary:Version})David Kalnischkies
As we ship some tools in apt-utils which depend on our private library we have to ensure that apt-utils depends on a proper apt version. An exact version is probably a bit much, but the simplest way out.
2015-11-29drop some needlessly public declarations in libapt-privateDavid Kalnischkies
Git-Dch: Ignore
2015-11-29move 'unmet' handling into libapt-privateDavid Kalnischkies
Git-Dch: Ignore
2015-11-29accept ../ on the cmdline as start for a deb file as wellDavid Kalnischkies
Regression of 14341a7ee1ca3dbcdcdbe10ad19b947ce23d972d. Reported-By: Julian Andres Klode <jak@debian.org>
2015-11-29tests: fix typos, correct helpmsgs and test testsDavid Kalnischkies
Git-Dch: Ignore
2015-11-29do not override exact targetrelease matches with lesser matchesAndreas Cadhalpun
The relevant testcases are in test/integration/test-apt-get-source. There is a test for #731853 that is supposed to "ensure that apt will pick the higher version number" of 0.0.1 (stable) and 0.1 (stable). However, this works by pure chance, as simply reversing the order of the two insertsource lines makes the test fail. So #731853 isn't really fixed, yet. Actually, that's related to the problem I reported, as the underlying issue for both is the same: In the FindSrc function apt chooses a new 'best hit', if either * there is a target release and it matches the release of the package, * or the version of the package is higher than the last best hit. Consider having 1.0 (stable), 2.0 (unstable) and 1.5 (unstable), in this order. Looking for the version in stable, apt first selects 1.0, because the release matches the target release, but then subsequently selects 2.0, because the version is higher. Looking for the version in unstable, apt first selects 2.0, because the release matches the target release, but then subsequently selects 1.5, because the release also matches the target release. The correct way would be to choose a new 'best hit', if either * there is a target release and it matches the release of the package, * or there is no target release and the version is higher than the last best hit. Closes: 746412 Mail-Reference: <565A604B.7090104@googlemail.com> Mail-Archive: https://lists.debian.org/debian-devel/2015/11/msg00470.html
2015-11-29use function pointers instead of weak symbols for cmdline parsingDavid Kalnischkies
Passing function pointers around while working on this was very icky, but if weak symbols are too much to ask for… Reverts "do not use "-Wl,-Bsymbolic-functions" during the build to avoid breakage" aka a5fc9be36211a290a7abc3ca2a8bf98943bc1f57.
2015-11-29doc: VerifyFile checks all hashes instead of best onlyDavid Kalnischkies
The implementation changed in 495b7a615a2d8f485beadf88c6ed298f5bbe50c2 Git-Dch: Ignore Reported-By: Julian Andres Klode <jak@debian.org>
2015-11-28Release 1.1.21.1.2Julian Andres Klode
2015-11-28Revert "Revert "appease adequate with some weak symbols for -private""Julian Andres Klode
This reverts commit 7ac9386cb6e272625490fcf3e8183b45e28bbc43.
2015-11-28do not use "-Wl,-Bsymbolic-functions" during the build to avoid breakageMichael Vogt
2015-11-28Revert "appease adequate with some weak symbols for -private"Julian Andres Klode
This reverts commit 28f24d3dad1844af316337d565ba2ebc11c8ce97. This fails on Ubuntu as they build with -Bsymbolic-functions.