| Age | Commit message (Collapse) | Author |
|---|
|
Moving the string is likely faster than copying it. We could probably
avoid strings alltogether in the future using some more crazy code,
but I have not looked at that yet.
Gbp-Dch: ignore
|
|
Gbp-Dch: ignore
|
|
Gbp-Dch: ignore
|
|
Thanks: Niels Thykier for reporting on IRC
Gbp-Dch: ignore
|
|
This improves performance of the cache generation on my
ARM platform (4x Cortex A15) by about 10% to 20% from
2.35-2.50 to 2.1 seconds.
|
|
The class APT::StringView implements a drop-in replacement
for a subset of C++17 std::string_view() features. It will
be dropped at a later point and may not be used in public
interfaces.
|
|
Remove the SingleInstance flag so we can use the new randomized
queue feature to run parallel.
|
|
The maximum parallelization soft limit is the number of CPU
cores * 2 on systems defining _SC_NPROCESSORS_ONLN. The hard
limit in all cases is Acquire::QueueHost::Limit.
|
|
This is a multiple of the page size and thus results in less
page faults, speeding up copying.
Also, while we're at at, unify all uses of that size in a
constant variable APT_BUFFER_SIZE.
|
|
This allows passing compressing the output. The compressor must
be a compressor name, extension, or an extension without the
leading dot.
|
|
Implement native support for LZ4 compression, using the official
lz4 library.
|
|
|
|
The PopFromSrvRecs() already removed the entry from the active
list, so the extra SrvRecords.erase() was incorrect.
Git-Dch: ignore
|
|
Git-Dch: ignore
|
|
Git-Dch: ignore
|
|
Gbp-Dch: ignore
|
|
This drop the hash table utilization from a high 98%
to acceptable 74% on unstable, and the average bucket length
from 4.6 to 1.8.
This improves performance by about 5%, while increasing
the size of the cache by 0.2 out of 38MB, that is 0.5%.
48481 is a nice number
|
|
Gbp-Dch: ignore
|
|
It does not make sense to consider empty buckets in the
average, as they do not affect the lookup performance.
|
|
I'd like to avoid pulling libgtest-dev into the bootstrap set.
Fortunately, libgtest-dev is only used for testing apt and apt
correctly implements DEB_BUILD_OPTIONS=nocheck now. So this
bug is about getting rid of the Build-Depends.
Simply removing it (by adding a build profile) is not sufficient
however as configure fails hard, so an additional bit is necessary
to cover for that.
Closes: #809726
|
|
This will give us the freedom to insert more compressors at
positions in between.
Also change the cost of uncompressed to 0, as that really has
no overhead, and the values do not really mean much.
|
|
This makes code easier to read, and somewhat more correct.
Gbp-Dch: ignore
|
|
Gbp-Dch: ignore
|
|
This aids our introduction of lz4, which we do not want to impose
as an additional requirement for bootstrappers.
Gbp-Dch: ignore
|
|
This option controls if downloaded packages should be kept after
a successful install or if they should be deleted. The default
for "apt-get" is that they are kept (just like before).
However the default for "apt" is that they get deleted.
Closes: #160743
|
|
The apt bash-completion support was submited to the bash-completion
package as a patch in May 2014. It is still not included to this
date and because it is an important feature for many users it is
now part of apt until the bash-completion package is mantained
more actively again.
Note that the "Relaces" line is only required for Ubuntu it will
have no effect on Debian.
Closes: #747094
|
|
In order to allow regular cleaning of the downloaded deb archives
the new option APT::Periodic::CleanInterval is added. It will run
"apt-get clean" in the given time interval.
Thanks: Martin-Éric Racine
|
|
apt_preferences and deb822-style sources used the specialized class
pkgUserTagSection to deal with comments before/after a given stanza, but
it couldn't deal with comments in the stanza at all.
codesearch suggests that nobody else does and a vastely superior way of
working with potentially commented files is implemented now, so we can
officially discourage the use of the old incomplete hack class.
|
|
Now (55153bf94ff28a23318e79aa48242244c4d82b3c) that pkgTagFile can be
told to deal with all sorts of comments we can use this mode to parse
dsc (as by catch) and debian/control files properly even in the wake of
multiline fields spliced with comments like Build-Depends.
Closes: 806775
|
|
APT usually deals with perfectly formatted files generated automatically
be other programs – and as it has to parse multiple MBs of such files it
tries to be fast rather than forgiving.
This was always a problem if we reused this parser for files with a
deb822 syntax which are mostly written by hand however, like
apt_preferences or the deb822-style sources as these can include stray
newlines and more importantly comments all over the place.
As a stopgap we had pkgUserTagSection which deals at least with comments
before and after a given stanza, but comments in between weren't really
supported and now that we support parsing debian/control for e.g.
build-dep we face the full comment problem e.g. with comments inbetween
multi-line fields (like Build-Depends).
We can't easily deal with this on the pkgTagSection level as the interface
gives access to 'raw' char-pointers for performance reasons so we would
need to optionally add a buffer here on which we could remove comments
to hand out pointers into this buffer instead. The interface is quite
large already and supports writing stanzas as well, which does not
support comments at all either. So while in future it might make sense
to have a parser setup which deals with and keeps comments in this
commit we opt for the simpler solution for now: We officially declare
that pkgTagSection does not support comments and instead expect the
caller to deal with them, which in our case is pkgTagFile:
pkgTagFile is extended with an additional mode which can deal with
comments by dropping them from the buffer which will later form the
input of pkgTagSection. The actual implementation is slightly more
complex than this sentence suggests at first on one hand to have good
performance and on the other to allow jumping directly to stanzas with
offsets collected in a previous run (like our cache generation does it
for example).
|
|
Git-Dch: Ignore
|
|
Closes: 809522
|
|
|
|
Integrity is taken care of by the checksum now.
|
|
|
|
If we already have opened a cache, there is no point in having
to open it again.
|
|
We ignored the boundary of the buffer we were reading in
while scanning for spaces.
|
|
This shuts up gcc
Gbp-Dch: ignore
|
|
This test relies on the ordering of the hash function.
|
|
To preserve compatibility, the new inline functions have _inline
as a suffix, and a macro defines the old names to refer to the
inline variants.
The old functions are still preserved for binary compatibility.
Also simplify the implementation of both functions.
|
|
On my testing system, consisting of unstable and experimental,
this reduces the average chain from 6.5 to 4.5, and the longest
chain from 17 to 15.
|
|
Previously, if flush errored inside the loop, data could have
already been written to the wrapped descriptor without having
been removed from the buffer.
Also try to work around EINTR here. A better solution might be
to have the individual privates detect an interrupt and return
0 in such a case, instead of relying on errno being untouched
in between the syscall and the return from InternalWrite.
|
|
Since commit 7a68effcb904b4424b54a30e448b6f2560cd1078, the xz
and lzma compressors read the level of compression they shall
use.
A default of -9 is too much for them, this will use 674 MB,
according to the xz manual page. Level -6 on the other hand
only needs 94 MB memory for compression.
This causes autopkgtest failures in the test-compressed-indexes
test, as not enough memory exists to proceed.
Change the other compression levels to 6 as well: The gzip
and bzip2 FileFd backends do not read them, and use their
code's default level which is 6, so do the same for external
methods.
|
|
There's no point in keeping using yet another read-then-write
loop.
Gbp-Dch: ignore
|
|
This avoids some issues with InternalWrite returning 0 because
it just cannot write stuff at the moment.
|
|
Closes: 809160
|
|
Regression introduced in 8710a36a01c0cb1648926792c2ad05185535558e,
but such fields are unlikely in practice as it is just as simple to not
have a field at all with the same result of not having a value.
Closes: 808102
|
|
|
|
People should know that this is exists.
|
|
Debian has a Packages file for arch:all already, but the arch:any files
contain arch:all packages as well, so downloading it would be a total
waste of resources. Getting this solved is on the list of things to do,
but it is also the hardest part – for index targets like Contents the
situation is much easier and less server/client implementations are
involved so we might not want to stall them.
A repository can now declare via:
No-Support-for-Architecture-all: Packages
that even if an arch:all Packages exists, it shouldn't be downloaded, so
that support for Contents files can be added now.
See also 1dd20368486820efb6ef4476ad739e967174bec4 for the implementation
of downloading arch:all index targets, which this is limiting.
The field uses the name of the target from the apt configuration for
simplicity and is negative by design as this field is intended to be
supported/needed only for a "short" time (one or two Debian releases).
While this commit theoretically supports any target, its expected to
only see "Packages" as a value in reality.
|
