| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This reverts commit fb3f36593563d09a8d1727cc7c6deb0b49823ca2. It
caused downloads to hang on long-lived connections on certain
servers.
Gbp-Dch: full
|
|
|
|
If the server closed the connection while we're reading data, and
we end up not having any data left to write; that is, for example,
we received 0 bytes, then we did not exit before, as we only returned
success if there was data to write.
This is wrong: Obviously, if we have reached our limit, we are done
anyway. It's a bit unclear if we actually ever reached this part, but
it does make some sense wrt the bug below.
LP: #1801338
|
|
Closes: #912374
|
|
|
|
Reviewed-By: Helge Kreutzmann <debian@helgefjell.de>
|
|
Closes: #912022
|
|
Closes: #912021
|
|
gcc 8 broke the ABI again. After they decided to switch mangling of ABI tags in return values from:
U URI::operator std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >[abi:cxx11]()
to:
U URI::operator std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >()
in gcc 7, they now removed the legacy symbol in gcc 8, causing us to break our ABI in turn
for that one operator. We need more responsible gcc developers.
Closes: #911090
|
|
This gives more protection for people where kernel metapackages
are accidentally removed.
LP: #1787460
|
|
Support subkeys and multiple keyrings in Signed-By options
See merge request apt-team/apt!27
|
|
apt-get.8: mention --only-source in 'source' and 'build-dep' description
See merge request apt-team/apt!24
|
|
Default to https: scheme for fetching Debian changelogs
See merge request apt-team/apt!30
|
|
Closes: #910941
|
|
|
|
Pass -i to git log, so "Release foo" is detected as well, not just
"release foo", and also handle the rename of Git-Dch to Gbp-Dch.
|
|
Some post-invoke scripts install packages, which fails because
the environment variable is not set. This sets the variable for
all three kinds of scripts {pre,post-}invoke and pre-install-pkgs,
but we will only allow post-invoke at a later time.
Gbp-Dch: full
|
|
See merge request apt-team/apt!29
[jak@d.o: Also adjust translations, provide better subject]
|
|
Including a block-element like informalexample in a para is legal, but
the documentation of the para tag hints that some processing systems may
have difficulties handling this – so lets just move it out of the block
and be happy as it is (again?) displayed.
Closes: #909712
|
|
pkgCacheFile's destructor unlocks the system, which is confusing
if you did not open the cachefile with WithLock set. Create a private
data instance that holds the value of WithLock.
This regression was introduced in commit b2e465d6d32d2dc884f58b94acb7e35f671a87fe:
Join with aliencode
Author: jgg
Date: 2001-02-20 07:03:16 GMT
Join with aliencode
by replacing a "Lock" member that was only initialized when the lock
was taken by calls to Lock, UnLock; with the latter also taking place
if the former did not occur.
Regression-Of: b2e465d6d32d2dc884f58b94acb7e35f671a87fe
LP: #1794053
|
|
A recent change to use chronos inadvertently replaced the
difference of new usec - old usec with new sec - old usec,
which is obviously wrong.
|
|
|
|
The implementation of "apt-cache show" (not "apt show") incorrectly
resets the currently used parser if the record itself and the
description to show come from the same file (as it is the case if no
Translation-* files are available e.g. after debootstrap).
The code is more complex than you would hope to support some rather
unusual setups involving Descriptions and their translations as tested
for by ./test-bug-712435-missing-descriptions as otherwise this could
be a one-line change.
Regression-Of: bf53f39c9a0221b670ffff74053ed36fc502d5a0
Closes: #909155
|
|
|
|
http: Stop pipeline after close only if it was not filled before
See merge request apt-team/apt!25
|
|
It is perfectly valid behavior for a server to respond with
Connection: close eventually, even when pipelining. Turning
off pipelining due to that is wrong. For example, some Ubuntu
mirrors close the connection after 101 requests. If I have
more packages to install, only the first 101 would benefit
from pipelining.
This commit introduces a new check to only turn of pipelining
for future connections if the pipeline for this connection did
not have 3 successful fetches before, that should work quite well to
detect broken server/proxy combinations like in bug 832113.
|
|
Process all of --status-fd and don't expect duplicate status msg
See merge request apt-team/apt!26
|
|
The uniqueness in std::set containers is ensured by the ordering
operator we provide, but it was not considering that different versions
can have the same description like the different architectures for a
version of a package.
Closes: #908218
|
|
do not suggest that 'source' and 'build-dep' arguments are binary
package names only
|
|
A user can specify multiple fingerprints for a while now, so its seems
counter-intuitive to support only one keyring, especially if this isn't
really checked or enforced and while unlikely mixtures of both should
work properly, too, instead of a kinda random behaviour.
|
|
If we limit a file to be signed by a certain key it should usually
accept also being signed by any of this keys subkeys instead of
requiring each subkey to be listed explicitly. If the later is really
wanted we support now also the same syntax as gpg does with appending an
exclamation mark at the end of the fingerprint to force no mapping.
|
|
We are seeing 'processing' messages from dpkg first, so it makes sense
to translate them to "Preparing" messages instead of using "Installing"
and co to override these shortly after with the "Preparing" messages.
The difference isn't all to visible as later messages tend to linger far
longer in the display than the ealier ones, but at least in a listing it
seems more logical.
|
|
The progress reporting relies on parsing the status reports of
dpkg which used to repeat being in the same state multiple times
in the same run, but by fixing #365921 it will stop doing so.
The problem is in theory just with 'config-files' in case we do purge as
this (can) do remove + purge in one step, but we remove this also for
the unpack + configure combination althrough we handle these currently
in two independent dpkg calls.
|
|
Exiting the processing loop as soon as the dpkg process finishes might
leave status-fd lines unprocessed which wasn't much of a problem in the
past as the progress would just be slightly off, but now that we us the
information also for skipping already done tasks and generate warnings
if we didn't see all expected messages we should make sure we seem them
all. We still need to exit "early" if dpkg exited unsuccessfully/crashed
through as the (remaining) status lines we get could be incomplete.
|
|
It is an uphill battle to "reset" the environment to a clean state
without making it needlessly hard to use 'good' environment variables,
so we just try a little harder here without really trying for
completeness.
Gbp-Dch: Ignore
|
|
Reported-By: Guillem Jover <guillem@debian.org>
Gbp-Dch: Ignore
|
|
No user-visible change as it effects mostly code comments and
not a single error message, manpage or similar.
Reported-By: codespell & spellintian
Gbp-Dch: Ignore
|
|
cppcheck reports: (error) Iterator 't' used after element has been erased.
The loop is actually fashioned to deal with this (not in the most
efficient way, but in simplest and speed isn't really a concern here)
IF this codepath had a "break" at the end… so I added one.
Note that the tests aren't failing before (and hopefully after) the
change as the undefined behavior we encounter is too stable.
Thanks: David Binderman for reporting
|
|
Closes: #907481
|
|
|
|
APT in 1.6 saw me rewriting the mirror:// transport method, which works
comparable to the decommissioned httpredir.d.o "just" that apt requests
a mirror list and performs all the redirections internally with all the
bells like parallel download and automatic fallback (more details in the
apt-transport-mirror manpage included in the 1.6 release).
The automatic fallback is the problem here: The intend is that if a file
fails to be downloaded (e.g. because the mirror is offline, broken,
out-of-sync, …) instead of erroring out the next mirror in the list is
contacted for a retry of the download.
Internally the acquire process of an InRelease file (works with the
Release/Release.gpg pair, too) happens in steps: 1) download file and 2)
verify file, both handled as URL requests passed around. Due to an
oversight the fallbacks for the first step are still active for the
second step, so that the successful download from another mirror stands
in for the failed verification… *facepalm*
Note that the attacker can not judge by the request arriving for the
InRelease file if the user is using the mirror method or not. If entire
traffic is observed Eve might be able to observe the request for
a mirror list, but that might or might not be telling if following
requests for InRelease files will be based on that list or for another
sources.list entry not using mirror (Users have also the option to have
the mirror list locally (via e.g. mirror+file://) instead of on a remote
host). If the user isn't using mirror:// for this InRelease file apt
will fail very visibly as intended.
(The mirror list needs to include at least two mirrors and to work
reliably the attacker needs to be able to MITM all mirrors in the list.
For remotely accessed mirror lists this is no limitation as the attacker
is in full control of the file in that case)
Fixed by clearing the alternatives after a step completes (and moving a pimpl
class further to the top to make that valid compilable code). mirror://
is at the moment the only method using this code infrastructure (for all
others this set is already empty) and the only method-independent user
so far is the download of deb files, but those are downloaded and
verified in a single step; so there shouldn't be much opportunity for
regression here even through a central code area is changed.
Upgrade instructions: Given all apt-based frontends are affected, even
additional restrictions like signed-by are bypassed and the attack in
progress is hardly visible in the progress reporting of an update
operation (the InRelease file is marked "Ign", but no fallback to
"Release/Release.gpg" is happening) and leaves no trace (expect files
downloaded from the attackers repository of course) the best course of
action might be to change the sources.list to not use the mirror family
of transports ({tor+,…}mirror{,+{http{,s},file,…}}) until a fixed
version of the src:apt packages are installed.
Regression-Of: 355e1aceac1dd05c4c7daf3420b09bd860fd169d,
57fa854e4cdb060e87ca265abd5a83364f9fa681
LP: #1787752
|
|
|
|
gpgs DETAILS documentation file declares that GOODSIG could report keyid
or fingerprint since gpg2, but for the time being it is still keyid
only. Who knows if that will ever change as that feels like an interface
break with dangerous security implications, but lets be better safe than
sorry especially as the code dealing with signed-by keyids is prepared
for this already. This code is rewritten still to have them all use the
same code for this type of problem.
|
|
The 1.7 series rework of show started in
bf53f39c9a0221b670ffff74053ed36fc502d5a0 resolved the issue already,
but its always a good idea to at least bring the tests along so
that we hopeful do not regress in the future with another rewrite.
Tests: #905527
Gbp-Dch: Ignore
|
|
Reviewed-by: Mo Zhou <cdluminate@gmail.com>
Closes: #903695
|
|
If multiple threads act on requests (like if connection comes from a
webbrowser) a thread might request the supported compressors while
another thread is still working on creating the list to be stored in the
static cache variable.
As the price to pay for atomic and co seems to high for the fringe
usecase of manual usage of aptwebserver the patch just makes a call to
generate the list while still single threaded.
Gbp-Dch: Ignore
|
|
Completely pointless as it makes no difference for apt,
but copying the file to other projects becomes a lot easier.
Gbp-Dch: Ignore
|
|
|
|
We forgot to set the variable for the selection changes. Let's
set it for that and some other dpkg calls.
Regression-Of: c2c8b4787b0882234ba2772ec7513afbf97b563a
|
