| Age | Commit message (Collapse) | Author |
|---|
|
Git-Dch: Ignore
|
|
In #737085 we see that apt can be confused if informations about
versions only differ slightly. This commit adds a way of at least adding
a few more data points with the next abi break to help a bit with it.
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Mostly ensures that we use the build methods and not the system
provided methods in the tests (if we don't want it that way).
Git-Dch: Ignore
|
|
As we deal with regex matchers here the dots are treated as wildcards if
we don't take care of escaping them. Not very likely that this could be
a real-world problem, but just to be sure.
|
|
Pre-build kernel modules (like those build with module-assistent) are
commonly named in this way and it should be ungeneric enough to be added
by default for everyone.
|
|
kfreebsd as well as hurd kernel packages call the postinst script as
well so we just need to enable the correct parsing for installed
packages and disable the "protect every version" hammer for them.
|
|
With APT::VersionedKernelPackages users have the option of adding
packages like pre-build out-of-tree modules to the list of automatically
protected from being autoremoved.
|
|
|
|
Git-Dch: Ignore
|
|
fixes some messages and their translation so that all of them have three
dots for messages with an elipse. Many translations already had this.
|
|
Description of the --install-suggests option is wrong in the polish
apt-get man page. The actual meaning of this option is the opposite
to what is written in the manual.
Closes: 741056
|
|
Old code limited lines to 250 characters which is probably enough for
everybody, but who knows… It also takes care of device nodes which start
with the same prefix.
|
|
Git-Dch: Ignore
|
|
The preparation code to deal with auto-detection and co is the same for
both methods, so not sharing them would be bad. Deals also with the
prevention of side effects triggered by the auto-detection like
disabling mounting for the fallback.
Git-Dch: Ignore
|
|
Commit 62dcbf84 changed the code of ident to look more like the code for
add on my suggestion. This made ident interactive as it starts with a
unmount, press enter, mount cycle. The first two are skipped now.
This fixes d-i/apt-setup which is using it to get ID as well as label.
Closes: 740673
|
|
The mountpoint might be auto-generated by the mount command so pushing
an error on the stack will confuse the following code and let it believe
an unrecoverable error occured while potentially everything is okay.
Same goes for umount as a non-existing mountpoint is by definition not
mounted.
|
|
Checking that parent-directory of mountpoint and mountpoint are on
different devices is fine most of the time, but is too restrictive
for our testcases and there shouldn't be anything wrong with 'normal'
users copying disk-contents around either if they want to.
We check for the existance of the ".disk/" directory now as this will
not be present if the disk isn't 'mounted'. Disks doesn't need to have
such a directory through, so for those we fall back to the old way of
detecting mounted or not mounted.
|
|
Git-Dch: Ignore
|
|
The unpack of a M-A:same package will force the unpack of all its
siblings directly to prevent that they could be separated by later
immediate actions. In commit 634985f8 a call to SmartConfigure was
introduced to configure these packages at the time the installation
order encounters them. Usually, the unpack order is already okay, so
that this 'earlier' unpack was not needed and if it wouldn't have been
done, the package would now only be unpacked, but by configuring the package
now we impose new requirements which must be satisfied. The code is
clever enough to handle this most of the time (it worked for 2 years!),
but it isn't needed and in very coupled cases this can fail.
Removing this call again removes this extra burden and so simplifies the
ordering as can be seen in the modified tests. Famous last words, but I
don't see a reason for this extra burden to exist hence the remove.
Closes: 740843
|
|
Now that the last few commits resolved the issues we can finally enable
a bunch of compiler warnings by default.
Git-Dch: ignore
|
|
The warning message from gcc doesn't make that much sense in my reading
as there is no loop which could overflow here, but it is better to use
our SPtrArray wrapping anyway which fixes the warning as well.
warning: cannot optimize loop, the loop counter may overflow [-Wunsafe-loop-optimizations]
delete[] Dsc;
Git-Dch: Ignore
Reported-By: gcc -Wunsafe-loop-optimizations
|
|
Git-Dch: Ignore
Reported-By: gcc -Wsuggest-attribute={pure,const,noreturn}
|
|
Beside being a bit cleaner it hopefully also resolves oddball problems
I have with high levels of parallel jobs.
Git-Dch: Ignore
Reported-By: iwyu (include-what-you-use)
|
|
also adds namespaced attributes for good usage
Git-Dch: Ignore
|
|
Reported-By: gcc -Wunused-parameter
Git-Dch: Ignore
|
|
Reported-By: gcc -Wignored-qualifiers
Git-Dch: Ignore
|
|
[-Wunsafe-loop-optimizations]
Git-Dch: Ignore
Reported-By: gcc -Wunsafe-loop-optimizations
|
|
Git-Dch: Ignore
Reported-By: gcc -Wmissing-declarations
|
|
Git-Dch: Ignore
Reported-By: gcc -Wuseless-cast
|
|
Git-Dch: Ignore
Reported-By: gcc -Wcast-qual
|
|
server.cc: In member function ‘bool ServerState::HeaderLine(std::string)’:
server.cc:198:72: warning: format ‘%llu’ expects argument of type ‘long long unsigned int*’, but argument 3 has type ‘long long int*’ [-Wformat=]
else if (sscanf(Val.c_str(),"bytes %llu-%*u/%llu",&StartPos,&Size) != 2)
Git-Dch: Ignore
Reported-By: gcc -Wpedantic
|
|
Git-Dch: Ignore
Reported-By: gcc -Wpedantic
|
|
Git-Dch: Ignore
Reported-By: gcc -Wpedantic
|
|
Git-Dch: Ignore
Reported-By: gcc
|
|
Reported-By: gcc
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Inspired by the rest of the patch in 661537, but abstract the
parsing of various ways of setting the build profiles more so it can
potentially be reused and all apt parts have the same behaviour.
Especially config options, cmdline options and environment will not be
combined as proposed as this isn't APTs usual behaviour and dpkg doesn't
do it either, so one overrides the other as it normally does.
|
|
Build-dependencies are now able to include a <profile.foo …>
specification limiting usage similar to already supported [arch …].
More details: https://wiki.debian.org/BuildProfileSpec
Closes: 661537
|
|
Automatically handle the override of list options via its parent value
which can even be a comma-separated list of values. It also adds an easy
way of providing a default for the list.
|
|
It can be useful to have a whole makefile available for vendor setup,
but by providing a basic one we can deal with the simple cases more
easily (and changes to the system are presumably easier).
|
|
Prevents that "old" dependencies have an influence in the scoring.
With positive dependencies this is usually not a problem, but negative
dependencies can linger around for a long time.
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
versioned -dev packages like db and boost have the problem of no
dependencies which would give them a competitive advantage against an
older incarnation of the -dev package, so they tend to be kept back
until the old version is removed from the archive, which, if the user
has older releases in its sources can take a long time (or never happens).
The newer version has a conflicts/breaks against the older one, but the
older one hasn't against the newer, so by giving via the conflicts the
older one a reduced score the newer one can win if there is no other
reason to keep it. If both have a conflict against each other the
scoring will cancel itself out, so no harm done.
This gives "action" a slightly bigger edge in breaks/conflicts cases
than before, but holding back isn't a really good solution anyway.
|
|
libapt-pkg depends on the other compressors, and now that
xz is the default in many cases, it should depend on that
one as well.
|
|
Signed-off-by: Trần Ngọc Quân <vnwildman@gmail.com>
|
|
|
|
|
