| Age | Commit message (Collapse) | Author |
|---|
|
ctest as run by cmake by default does not show the output of the tests
even if the tests failed. In terms of our tests it could be handy to set
it always, but unfortunately it seems like cmake doesn't allow it if the
internet is to be believed, so lets enable it at least while building
packages and on travis.
Gbp-Dch: Ignore
|
|
This is much better than removing them in debian/rules.
Gbp-Dch: ignore
|
|
I don't know what happened back in 2009 when I wrote this,
but it seems I used the wrong option. These files should
not have any variable substitution done to them.
|
|
Seems like I missed that when adding doxygen support.
Gbp-Dch: ignore
|
|
This was only needed temporarily
Thanks: Axel Beckert for reporting
|
|
This commit looks heavy. Most of that comes from the fact that the
ordering of files in the translations changed with the switch to
CMake. I could have gone the extra mile to figure out the original
ordering and replicate it, but I have chosen to re-order everything
by file and line number, as that's easier.
|
|
This enhances commit b9e6db821a6ddbc5bf6a90c80c296d4e91283a63.
Gbp-Dch: ignore
|
|
With cmake using BUILDDIRECTORY at this place is not only as wrong as it
was before, but it might not even work always copying the system
provided one which might or might not be current and hence fails tests
needing it to be current like ./test-apt-move-and-forget-manual-sections
We don't want to always use the one from the source directory through
either like in autopkgtests.
Gbp-Dch: Ignore
|
|
|
|
|
|
With apts http transport supporting socks5h proxies and all the work
in terms of configuration of methods based on the name it is called with
it becomes surprisingly easy to implement Tor support equally (and
perhaps even a bit exceeding) what is available currently in
apt-transport-tor.
How this will turn out to be handled packaging wise we will see in
https://lists.debian.org/deity/2016/08/msg00012.html , but until this is
resolved we can add the needed support without actively enabling it for
now, so that this can be tested better.
|
|
Doing a direct connect to an .onion address (if you don't happen to use
it as a local domain, which you shouldn't) is bound to fail and does
leak the information that you do use Tor and which hidden service you
wanted to connect to to a DNS server. Worse, if the DNS is poisoned and
actually resolves tricking a user into believing the setup would work
correctly…
This does block also the usage of wrappers like torsocks with apt, but
with native support available and advertised in the error message this
shouldn't really be an issue.
Inspired-by: https://bugzilla.mozilla.org/show_bug.cgi?id=1228457
|
|
With b4450f1dd6bca537e60406b2383ab154a3e1485f we dropped what we
calculated here later on and now that we don't need it in the meantime
either we can just skip the busy work by default and expect dpkg to do
the right thing dropping also our little "last explicit configures"
removal trick introduced in b4450f1dd6bca537e60406b2383ab154a3e1485f.
This enables the last of a bunch of previously experimental options,
some of them existing still, but are very special and hence not really
worth documenting anymore (especially as it would need to be rewritten
now entirely) which is why the documentation is nearly completely
dropped.
The order of configuration stanzas in the simulation code changes
slightly as it isn't concerning itself with finding the 'right' order,
but any order is valid anyhow as long as the entire set happens in the
same call.
|
|
If a planner lets actions to be figured out by dpkg in pending calls
these actions aren't mentioned in a simulation. While that might be
a good thing for debugging, it would be a change in behavior and
especially if a planner avoids explicit removals could be confusing for
users. As such we perform the same 'trick' as in the dpkg implementation
by performing explicitly what would be done by the pending calls.
To save us some work and avoid desyncs we perform a layer violation by
using deb/ code in the generic simulation – and further we perform ugly
dynamic_cast to avoid breaking the ABI for nothing; aptitude is the only
other user of the simulation class according to codesearch.d.n and for
that our little trick works. It just isn't working if you happen to
extend pkgSimulate or otherwise manage to call the protected Go methods
directly – which isn't very realistic/practical.
|
|
The user has to approve the removal of a crossgraded package as it might
be needed to remove it (temporarily) in the process, but in most cases
we can happily avoid it and let dpkg unpack over it skipping the
remove. This has some effects on progress reporting and how deal with
selections through which makes this a tiny bit complicated.
|
|
If the URI had no password the username was ignored
|
|
Reported-By: Johannes 'josch' Schauer on IRC
Gbp-Dch: Ignore
|
|
To prevent accidents like adding http-sources while using tor+http it
can make sense to allow disabling methods. It might even make sense to
allow "redirections" and adding "symlinked" methods via configuration.
This could e.g. allow using different options for certain sources by
adding and configuring a "virtual" new method which picks up the config
based on the name it was called with like e.g. http does if called as
tor+http.
|
|
Socks support is a requested feature in sofar that the internet is
actually believing Acquire::socks::Proxy would exist. It doesn't and
this commit isn't adding it as that isn't how our configuration works,
but it allows Acquire::http::Proxy="socks5h://…". The HTTPS method was
changed already to support socks proxies (all versions) via curl. This
commit implements only SOCKS5 (RFC1928) with no auth or pass&user auth
(RFC1929), but not GSSAPI which is required by the RFC. The 'h' in the
protocol name further indicates that DNS resolution is delegated to the
socks proxy rather than performed locally.
The implementation works and was tested with Tor as socks proxy for
which implementing socks5h only can actually be considered a feature.
Closes: 744934
|
|
The https method implemented for a long while now a hardcoded fallback
to the same options in http, which, while it works, is rather inflexible
if we want to allow the methods to use another name to change their
behavior slightly, like apt-transport-tor does to https – most of the
diff being s#https#tor#g which then fails to do the full circle
fallthrough tor -> https -> http for https sources. With this config
infrastructure this could be implemented now.
|
|
cURL which backs our https implementation can handle redirects on its
own, but by dealing with them on our own we gain finer control over which
redirections will be performed (we don't like https → http) and by whom
so that redirections to other hosts correctly spawn a new https method
dealing with these instead of letting the current one deal with it.
|
|
Having the detection handled in specific (http) workers means that a
redirection loop over different hostnames isn't detected. Its also not a
good idea have this implement in each method independently even if it
would work
|
|
Closes: #623443
|
|
apt-transports not shipped in apt directly are usually named
apt-transport-% with % being what is in the name of the transport.
tor additional introduced aliases via %+something, which isn't a bad
idea, so be strip the +something part from the method name before
suggesting the installation of an apt-transport-% package.
This avoids us the maintainance of a list of existing transports
creating a two class system of known and unknown transports which would
be quite arbitrary and is unfriendly to backports.
|
|
|
|
Same reason and implementation as for configure.
|
|
A planner might not explicitly configure all packages, but we need to
know all packages which will be configured for progress reporting and to
tell the hook scripts about them as they rely on this for their own
functionality.
|
|
If we want a package to be purged from the system tell dpkg in the
ordering (if it has to touch it explicitly) to remove it and cover the
purging of the config files at the end with a --purge --pending call.
That should help packages move conffiles around between packages
correctly even if the user is purging packages directly in big actions
like dist-upgrades involving many packages.
|
|
Implemented a long while ago now with relatively good progress reporting
involving triggers is a good time to try delaying the execution of
triggers across dpkg invocations finally by default.
Note: The bugreport talks also about 'smarter' configuration which is a
much bigger part and approached from multiple directions, but doesn't
really involve triggers per-se so considering it decoupled should help
in getting it done…
Closes: #626599
|
|
Telling dpkg early on that we are going to remove these packages later
helps it with auto-deconfiguration decisions and its another area where
a planner can ignore the nitty gritty details and let dpkg decide the
course of action if there are no special requirements.
|
|
dpkg decides certain things on its own based on selections and
especially if we want to call --pending on purge/remove actions, we need
to ensure a clean slate or otherwise we surprise the user by removing
packages we weren't allowed to remove by the user in this run (the
selection might be an overarching plan for the not-yet "future").
Ideally dpkg would have some kind of temporal selection interface for
this case, but it hasn't, so we make it temporal with the risk of
loosing state if we don't manage to restore them.
|
|
Having long commandlines split into two is a huge problem if it happens
and additionally if we want to introduce planners which perform less
micromanagment its a good idea to leave the details for dpkg to decide.
In practice this doesn't work yet unconditionally as a bug is hiding in
the ordering code of dpkg, but it works if apt imposes its ordering so
this commit allows for now at least to solve the first problem.
|
|
APT (usually) knows which package is essential or not, so we can avoid
passing this force flag to dpkg unconditionally if the user hasn't
chosen a non-default essential handling obscuring the information.
|
|
This breaks -j and does all sort of other weird stuff I did not
notice in the previous (non-parallel) runs.
Gbp-Dch: ignore
|
|
|
|
|
|
Look at the project root, and all directories directly below it and
pick the directory with the newest CMakeCache.txt file.
Gbp-Dch: ignore
|
|
We cannot be sure if you are not running the build tree, so this
is a bit ugly.
Gbp-Dch: ignore
|
|
Bye, bye, old friend.
|
|
Gbp-Dch: ignore
|
|
Gbp-Dch: ignore
|
|
This causes build failures when turning translations off.
|
|
Teach the prepare-release script about the version new locations
and also set the version in CMakeLists, as that is better than
reading it from the changelog: CMake would not rerun automatically
otherwise if the version changed.
Gbp-Dch: ignore
|
|
This can now build all documentation. It should also be fairly
reusable for other projects, as long as they follow the same
naming scheme for the po4a output files and set the PACKAGE_*
variables used here.
We could have done all translations in a single call to po4a
like the makefile based buildsystem does. While that would
have made the output slightly nicer, this solution offers a
huge performance gain because it can translate the documents
in parallel, which also means that the xsltproc stage does not
have to wait for all translations to be done first.
You might think that the add_custom_command() should list the
actual output files as BYPRODUCTS. This is not true however:
Because the files are not always generated, Ninja will think
missing byproducts mean that the target is out of date - which
is not what we want.
Finally, also add the missing doxygen support. Note that the
packaging script cleans up some md5 and map files created by
doxygen, otherwise it is fairly boring.
|
|
This abstracts the joining of paths a bit better than having
basically the same code twice in the Translations module.
Gbp-Dch: ignore
|
|
This was dropped in autotools as I found no use of the HAVE_PTSNAME_R
macro. Turns out it was typoed as HAVE_PTS_NAME_R. Fix the #ifdef and
add checks to CMake for it.
Closes: #833674
|
|
It's not entirely clear if that is useful, but it cannot hurt. We
need to check what is missing to build on foreign systems without
dpkg.
Gbp-Dch: ignore
|
|
The SOURCE_DIR property is used for the translation building and
was introduced in cmake 3.4
|
|
|
|
Add support for our GTest based unit tests. By default, CMake will
look in /usr/src/gtest for the external GTest project, but this can
be overriden by defining GTEST_ROOT when invoking cmake.
Gbp-Dch: ignore
|
