| Age | Commit message (Collapse) | Author |
|---|
|
StackPost
|
|
|
|
|
|
|
|
|
|
Multi-Arch: same packages can be co-installed, but need to have the same
version for all installed packages (aka "siblings"). Otherwise the
unsynced versions will fight against each other and the auto-install as
wel as the problem resolver will later have to decide between holding the
packages or to remove one of the siblings (usually a foreign) taking a
bunch of packages (like the entire foreign setup) with them.
The idea here is now to be more pro-active: MarkInstall will fail for
a package if the siblings aren't synced, so we don't allow a situation
in which a resolver has to decide if to hold or to remove-upgrade under
the assumption that the remove-upgrade decision is always wrong and
doesn't deserve to be explored (expect valid out-of-syncs of course).
Thats a pretty bold move to take for a library which is used by
different solvers so this check is done in IsInstallOk and can be
overridden if front-ends want to.
|
|
Default is to acquire all architectures from APT::Architectures which
can be changed by arch=, but this isn't very flexible if you want
"mostly" the default as you have to hardcode the architectures then,
so arch-= and arch+= can be used to add/remove architectures from the
default set.
On a machine with 'amd64' and 'i386' configured the lines:
deb [arch+=armel] http://example.org/debian wheezy rocks
deb [arch-=amd64] http://example.org/debian jessie rocks
will result in the download of:
wheezy Packages for 'amd64', 'i386' and 'armel'
jessie Packages for 'i386'
|
|
Adds on top of Version 2 to all displayed version numbers the
architecture as well as the MultiArch flag for consumption by the hooks.
Most of the time the architecture will be the same for both versions
displayed, but packages might change from "all" to "any" (or back)
between versions so we can't display the architecture for packages.
Pseudo-Format for Version 3:
<name> <version> <arch> <m-a-flag> <compare> <version> <arch> <m-a-flag>
Examples:
stuff - - none < 1 amd64 none **CONFIGURE**
libsame 1 i386 same < 2 i386 same **CONFIGURE**
stuff 2 i386 none > 1 i386 none **CONFIGURE**
libsame 2 i386 same > - - none **REMOVE**
toolkit 1 all foreign > - - none **REMOVE**
Closes: #712116
|
|
|
|
- Use exact matches with $-terminated regexes, so we don't get
confusion between similarly-named kernel flavours.
- Keep linux-backports-modules in sync with installed kernels.
Conflicts:
configure.in
debian/changelog
doc/apt-verbatim.ent
|
|
apt-config (for paranoia)
Conflicts:
debian/apt.auto-removal.sh
|
|
|
|
|
|
* apt-pkg/packagemanager.cc:
- increate APT::pkgPackageManager::MaxLoopCount to 5000
|
|
* debian/rules:
- call dh_clean in clean (closes: #714980)
|
|
|
|
|
|
|
|
|
|
Conflicts:
debian/changelog
|
|
|
|
|
|
|
|
debug output of Debug::pkgDepCache::AutoInstall=true
|
|
|
|
|
|
is found
|
|
Forking only after being ready to accept clients avoids running races
with the tests which sometimes failed on the first 'apt-get update'
(or similar) with the previous background-start and hope for the best…
The commit fixes also some oversight output-order changes in regards to
Description-md5 and (I-M-S) race conditions in various tests.
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
GCC 4.8 is now clever enough to warn about:
contrib/sha2_internal.cc: In function ‘char* SHA256_End(SHA256_CTX*, char*)’:
contrib/sha2_internal.cc:656:31: warning: argument to ‘sizeof’ in ‘void*
memset(void*, int, size_t)’ call is the same expression as the destination;
did you mean to dereference it? [-Wsizeof-pointer-memaccess]
MEMSET_BZERO(context, sizeof(context));
So fix it as suggested. Its interesting though that the SHA2*
calculation as far as we need it works even without zeroing out.
Git-Dch: Ignore
|
|
fixup for 42d51f333e8ef522fed02cdfc48663488d56c3a3
The for-loop iterating over the DepIterators which need configuration
can (and will be in 'complicated' situations) run multiple times, so we
can't just GlobOr on the DepIterator as it modifies it, so that the next
iteration over the list ends up checking another dependency leading us
into a 'Internal error, packages left unconfigured. foopkg' maybe or we
are 'lucky' and calculate a solution which might break down the line
Git-Dch: Ignore
|
|
(closes: #712433)
|
|
The file isn't supposed to be a valid config file, but it should
show valid syntax non-the-less.
Git-Dch: Ignore
|
|
With the selfgrown splitting we got the problem of not recovering
from networks which just reply with invalid data like those sending
us login pages to authenticate with the network (e.g. hotels) back.
The good thing about the InRelease file is that we know that it must
be clearsigned (a Release file might or might not have a detached sig)
so if we get a file but are unable to split it something is seriously
wrong, so there is not much point in trying further.
The Acquire system already looks out for a NODATA error from gpgv,
so this adds a new error message sent to the acquire system in case
the splitting we do now ourselves failed including this magic word.
Closes: #712486
|
|
Git-Dch: Ignore
|
|
we have a test which required traditionally lighttpd to be executed
as it requires a webserver supporting some kind of URI rewriting.
Now with some lines of code our own webserver can do this and the
testcase can be enabled by default. This test hinted at the bug fixed
in the previous commit, so having more tests which can easily be run
is a good thing.
Git-Dch: Ignore
|
|
Before we download the 'new' InRelease file the old file will be moved
out of the way with the name 'foobar_InRelease.reverify', so if no
partial file for the 'new' file exists take the modification time from
this reverify file, so that if we get an IMS hit for the InRelease file
we can move back the reverify file as new file rather than downloading
the 'new' file even though we already have it.
We do the same for Release files and this happened to work until the
reverify renaming was corrected for InRelease files.
|
|
Git-Dch: Ignore
|
|
APT needs to acquire data in a secure fashion over an inherently
unsecure way, known as the internet, while communicating with
unreliable partners, known as webservers and proxies.
For your integration tests we so far relied on 'normal' webservers,
but all of them have certain quirks and none is able to provide us
with all quirks which can be observed in the wild and we therefore
have to test with, so this webserver isn't trying to be fast, secure
or feature complete, but to provide all the quirks we need in a
consistent way.
This webserver also makes the APT project self-contained, as it is now
able to generate, serve as well as acquire package indexes. ;)
Git-Dch: Ignore
|
|
|
|
The default is to ask udev for location and mountpoints of CD-ROMs,
but the old way of specifying the mountpoint is still available and
is tried now in case udev doesn't find any CD-ROM.
It probably fails, too, but we get a bunch of error messages this
way and the user can get an idea of how to make his setup work even
if udev can't be convienced to return something useful.
Closes: #712433
|
|
do not blindly assume that all packages stanzas have a "Description:"
field in 'apt-cache show' as well as in the cache creation itself.
We instead assume now that if the stanza has a Description, it will not
be the first field as we look out for "\nDescription" to take care of
MD5sum as well as (maybe ignored) translated Descriptions embedded in
the package stanza.
Closes: #712435
|
|
Closes: #711921
|
|
Can't be used as a test as is, but shows how to build multiple
CD-ROMs for tests and can be used to reproduce debbug #711456.
Git-Dch: Ignore
|
|
We do the same in the acquire system which handles the 'normal'
downloads, so do it here as well even though its unlikely anyone
will ever notice (beside testcases of course …)
|
|
Testing for global PendingErrors in users of CopyFile is incorrect
in so far as unrelated errors will prevent us from copying perfectly
fine files and checking for the validity of the files is just better
in CopyFiles as it already checks if files are at least opened.
Add also a higher-level error message to the error stack if it fails.
|
|
The buildsystem tried to build l10n for test applications which never
produced the output it expected causing it to try building it all the
time.
|
|
fixing parallel build in the handcrafted buildsystem is a pain,
so its not enabled by default, but its works for me – sometimes
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
For testcases it might sometimes be handy to add trap-actions
before the general cleanup, e.g. if it has set directories read-
only which rm doesn't want to remove even with --force applied
(its fine with files though)
Git-Dch: Ignore
|
