summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-11-28show the group we failed to drop via setgroupsDavid Kalnischkies
This also deals with the unlikely case of groups being mentioned multiple times or if the effective group isn't mentioned at all. In practice, it is a debugging aid through like for #806475. Git-Dch: Ignore
2015-11-28autopkgtest: use the quiet mode as for travis and coDavid Kalnischkies
Git-Dch: Ignore
2015-11-28tests: use id to get user/group instead of environmentDavid Kalnischkies
debci seems to have a cleaner environment now and even if not we could never guess nogroup, so figure it out properly via 'id'. Git-Dch: Ignore
2015-11-27ignore deprecated method calls in deprecated methodDavid Kalnischkies
Git-Dch: Ignore
2015-11-27outsmart gcc -O3 over-optimization in pkgCdrom::FindPackagesDavid Kalnischkies
Seems like a simpler workaround than forcing a lower optimization level just for this for all of apt. See also: https://bugs.launchpad.net/ubuntu/+source/gcc-5/+bug/1473674
2015-11-27update arch-specific symbols in symbols fileDavid Kalnischkies
Git-Dch: Ignore
2015-11-27./prepare-release pre-export1.1.1Michael Vogt
2015-11-27prepare 1.1.1 releaseMichael Vogt
2015-11-27say 'master' is default branch in README, tooDavid Kalnischkies
Git-Dch: Ignore
2015-11-27add messages to our deprecation warnings in libaptDavid Kalnischkies
Git-Dch: Ignore
2015-11-27appease adequate with some weak symbols for -privateDavid Kalnischkies
Closes: #806422
2015-11-27use pre-build hook to check for pre-export executionDavid Kalnischkies
Git-Dch: Ignore
2015-11-27debian/gbp.conf: point debian-branch to masterMichael Vogt
Git-Dch: ignore
2015-11-27Check if the Apt::Sandbox::User exists in CheckDropPrivsMustBeDisabled()Michael Vogt
If it does not exist disabled priv dropping as there is nothing we can drop to. This will unblock people with special chroots or systems that deleted the "_apt" user. Closes: #806406
2015-11-27Deal with killed acquire methods properly instead of hangingMichael Vogt
This fixes a regression caussed by commit 95278287f4e1eeaf5d96749d6fc9bfc53fb400d0 that moved the error detection of RunFds() later into the loop. However this broke detecting issues like dead acquire methods. Instead of relying on the global error state (which is bad) we now pass a boolean value back from RunFds() and break on false. Closes: #806406
2015-11-26release apt 1.11.1Michael Vogt
2015-11-26Do not run pre*export* functions in the pre*build* hookMichael Vogt
Unfortunately it seems like git-buildpackage does not have a pre-export hook so the hook is disabled for now. Git-Dch: ignore
2015-11-26Fix missing </literal> in sources.list.5.xml pageMichael Vogt
Git-Dch: ignore
2015-11-26Merge remote-tracking branch 'donkult/debian/experimental' into ↵Michael Vogt
debian/experimental
2015-11-26reword Trusted paragraph in sources.list(5)Justin B Rye
Git-Dch: Ignore
2015-11-25Run ./prepare-release pre-exportMichael Vogt
2015-11-25Prepare release 1.1~exp17Michael Vogt
2015-11-25update manpage last-modified from git via pre-export hookDavid Kalnischkies
Never updating this information is wrong, updating it automatically isn't super correct either, but it seems conventional to have it and updating it more often than needed seems better than updating it never. Git-Dch: Ignore
2015-11-25enforce a slightly more sensible default headerDavid Kalnischkies
In 12f7536 I chose to opt for a slightly better text which avoids assigning copyright to the FSF (not because it would be wrong to do it, but is usually not what the contributor intended, but just the default. xgettext has a --foreign flag for avoiding the copyright, but po4a hasn't and an empty copyright-holder doesn't work either, so this little rework of files with sed and cat. Git-Dch: Ignore
2015-11-25typo: run s#frontend#front-end# on all of src:aptDavid Kalnischkies
The manpages were fixed by Justin B Rye, lets deal with the rest now. Git-Dch: Ignore
2015-11-25review sources.list(5) manpageJustin B Rye
2015-11-25review apt-secure(8) manpageJustin B Rye
2015-11-25review apt-mark(8) manpageJustin B Rye
2015-11-25review apt(8) manpageJustin B Rye
2015-11-25slightly rephrase notice shown for insecure repositoriesJustin B Rye
Git-Dch: Ignore
2015-11-24releasing package apt version 1.1~exp161.1_exp16Michael Vogt
2015-11-21show potentially arch-qualified fullname in 'apt show'David Kalnischkies
We do not show the architecture as a dedicated field as this is rather technical information, but as packagename it makes sense to show the architecture as other part of apt will refer to it in this way.
2015-11-21review of new/changed translatable program stringsJustin B Rye
Reference mail: https://lists.debian.org/debian-l10n-english/2015/11/msg00006.html
2015-11-21do not sent Last-Modified if we expect a changed fileDavid Kalnischkies
In 8d041b4f we made apt figure out based on the last Release file it has if it should request a file or not given that the hashes changed or not. So if we have a last Release file and do a request, do not sent a Last-Modified header as we expect a change so much that a non-change would indeed be an error. The Last-Modified header is therefore at best ignored by the server, so sending it is just wasted effort. In the worst case as time is a fragile thing the server decides against sending us an update with the idea that we already have the latest content, which we know for a fact that we haven't. Given that we sent less information to the server our request is on its own also less identifiable as coming from a returning or new user. The disadvantage is that if we end up getting an old index file after getting a new Release file from another mirror the old mirror will not be able to tell us 'Hit', but instead sends us the complete file we discard, but both lets us end up with the same error class in the end, so the difference isn't big in practice.
2015-11-20fix a few typos in code-comments/apt manpageDavid Kalnischkies
Reported-By: codespell Git-Dch: Ignore
2015-11-20do not segfault in cache generation on mmap failureDavid Kalnischkies
Out of memory and similar circumstanzas could cause MMap::Map to fail and especially the mmap/malloc calls in it. With some additional checking we can avoid segfaults and similar in such situations – at least in theory as if this is a real out of memory everything we do to handle the error could just as well run into a memory problem as well… But at least in theory (if MMap::Map is made to fail always) we can deal with it so good that a user actually never sees a failure (as the cache it tries to load with it fails and is discarded, so that DynamicMMap takes over and a new one is build) instead of segfaulting. Closes: 803417
2015-11-19do not rerun ./configure causing FTCBFS with newer autotools-devDavid Kalnischkies
If the config.{sub,guess} files we linked in were newer than our configure script we ended up recreating configure and then rerun it without all the configuration options which were (potentially) present for a previous run. We avoid this by changing to the same ruleset as in the debian/rules file which compares the config.* files against a stamp file rather than the configure script itself as its the configuration itself which depends on all scripts, not configure on the config scripts. While at it, we also drop the 'make -s dirs' call as we don't need to do it explicitly here as proper dependencies will take care of it. Thanks: Helmut Grohne for the detailed bugreport. Closes: 804923
2015-11-19update libapt-{pkg,inst} symbols filesDavid Kalnischkies
2015-11-19move -std=c++11 from CXX to new CXXSTDDavid Kalnischkies
The hack introduced in aa91826f is replaced with a hopefully better working "proper" solution with a new variable just for the standard we use everywhere we use CXXFLAGS. Git-Dch: Ignore
2015-11-19ignore lost+found in private directory cleanupDavid Kalnischkies
In ce1f3a2c we started warning about failing unlinking, which we consistently do for directories. That isn't a problem as directories usually aren't in the places we do want to clean up – with the potential exeception of "lost+found", so lets ignore it like we ignore our own partial/ subdirectory. Closes: 805424
2015-11-19tests: use quiet level 0 by default in testsDavid Kalnischkies
Git-Dch: Ignore
2015-11-19support setting empty values (sanely) & removing support forDavid Kalnischkies
space-gapping: '-o option= value' That is a very old feature (straight from 1998), but it is super surprising if you try setting empty values and instead get error messages or a non-empty value as the next parameter is treated as the value – which could have been empty, so if for some reason you need a compatible way of setting an empty value try: '-o option="" ""'. I can only guess that the idea was to support '-o option value', but we survived 17 years without it, we will do fine in the future I guess. Similar is the case for '-t= testing' even through '-t testing' existed before and the code even tried to detect mistakes like '-t= -b' … all gone now. Technically that is as its removing a feature replacing it with another a major interface break. In practice I really hope for my and their sanity that nobody was using this; but if for some reaon you do: Remove the space and be done. I found the patch and the bugreport actually only after the fact, but its reassuring that others are puzzled by this as well and hence a thanks is in perfect order here as the patch is practical identical [expect that this one here adds tests and other bonus items]. Thanks: Daniel Hartwig for initial patch. Closes: 693092
2015-11-19more sensible default text in pot filesDavid Kalnischkies
Git-Dch: Ignore
2015-11-19Dutch manpages translation (NEW)Frans Spiesschaert
Closes: 805474
2015-11-19do not use _apt for file/copy sources if it isn't world-accessibleDavid Kalnischkies
In 0940230d we started dropping privileges for file (and a bit later for copy, too) with the intend of uniforming this for all methods. The commit message says that the source will likely fail based on the compressors already – and there isn't much secret in the repository content. After all, after apt has run the update everyone can access the content via apt anyway… There are sources through which worked before which are mostly single-deb (and those with the uncompressed files available). The first one being especially surprising for users maybe, so instead of failing, we make it so that apt detects that it can't access a source as _apt and if so doesn't drop (for all sources!) privileges – but we limit this to file/copy, so the uncompress which might be needed will still fail – but that failed before this regression. We display a notice about this, mostly so that if it still fails (e.g. compressed) the user has some idea what is wrong. Closes: 805069
2015-11-18tests: fail testsuccess if notices are shown, tooDavid Kalnischkies
Notices are just hints, but if they are printed in tests, they should be expected and if not the test should fail. No current test has this problem, so that is just potential future proving. Git-Dch: Ignore
2015-11-11releasing package apt version 1.1~exp151.1_exp15Michael Vogt
2015-11-05activate AI_IDN by default to support IDN domainsDavid Kalnischkies
AI_IDN is a glibc extension, but we can worry about this at the time actually anyone is seriously trying apt on non-glibc systems. Closes: 763437
2015-11-05"support" unsigned Release files without hashes againDavid Kalnischkies
This 'ignores' the component Release files you can find in Debian alongside the binary-* directories, which isn't exactly a common usecase, but it worked before, so lets support it again as this isn't worse than a valid Release file which is unsigned. Git-Dch: Ignore
2015-11-05encode UTF-8 characters correctly in QuoteStringDavid Kalnischkies
Limit the field length to a char to avoid bogus FF for utf-8 characters with the default length. Closes: 799123