| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Tested via (newly) empty index files, but effects also files dropped
from the repository or an otherwise changed repository config.
|
|
There is just no point in taking the time to acquire empty files –
especially as it will be tiny non-empty compressed files usually.
|
|
With the previous fix for file applied we can again hit repositories
which contain uncompressed empty files, which since the introduction of
the central store: method wasn't accounted for anymore as we forbid
empty compressed files.
|
|
A silly of-by-one error in the stripping of the extension to check for
the uncompressed filename broken in an attempt to support all
compressions in commit a09f6eb8fc67cd2d836019f448f18580396185e5.
Fixing this highlights also mistakes in the handling of the Alt-Filename
in libapt which would cause apt to remove the file from the repository
(if root has the needed rights – aka the disk isn't readonly or similar)
|
|
Regression introduced in commit 590f1923121815b36ef889033c1c416a23cbe9a2
(2011!) causing apt to not check if Pre-Depends are satisfied before
calling --configure. This managed to hide so perfectly well for years as
Pre-Depends aren't that common, apt prefers upgrading these packages
first and checks for satisfaction is already in SmartUnpack, so there
is only a small window of oppertunity to break a pre-dependency relation
(usually with an unpack).
Verified by logchecking with two provided status files in the buglog.
I would have liked to write a test, but I wasn't able to reach the needed
complexity to get apt to fail – but the change is small and reasonable,
so what could possible go wrong™, right?
LP: #1569099
|
|
It handy to be able to point apt at reading a compressed dpkg/status
file in debugging cases, which worked pre-1.1 but somewhere down the
line in the massive refactoring. Restoring this behavior in a central
place for all realfile index files instead of just for the status file.
(This has no effect on index files acquired from an archive – those are
handled by different classes and support compressed files just fine)
|
|
Closes: 820638
|
|
There is a good chance that the attempt will fail, but if a user
mentions certain packages explicitly on the commandline there is a
chance that this will consist of a broken system which is resolved
by upgrading more packages then just the mentioned.
This limitation was not effecting external resolvers.
|
|
Breaking here lets our handler die which a client will fix by
reconnecting… but that eats time needlessly and is simple the wrong
handling, too.
Git-Dch: Ignore
|
|
With the previous commit we track the state of transactions, so we can
now use our knowledge to avoid processing data for a transaction which
was already closed (via an abort in this case).
This is needed as multiple independent processes are interacting in the
process, so there isn't a simple immediate full-engine stop and it would
also be bad to teach each and every item how to check if its manager
has failed subordinate and what to do in that case.
In the pdiff case, which deals (potentially) with many items during its
lifetime e.g. a hashsum mismatch in another file can abort the
transaction the file we try to patch via pdiff belongs to. This causes
some of the items (which are already done) to be aborted with it, but
items still in the process of acquisition continue in the processing and
will later try to use all the items together failing in strange ways as
cleanup already happened.
The chosen solution is to dry up the communication channels instead by
ignoring new requests for data acquisition, canceling requests which are
not assigned to a queue and not calling Done/Failed on items anymore.
This means that e.g. already started or pending (e.g. pipelined)
downloads aren't stopped and continue as normal for now, but they remain
in partial/ and aren't processed further so the next update command will
pick them up and put them to good use while the current process fails
updating (for this transaction group) in an orderly fashion.
Closes: 817240
Thanks: Barr Detwix & Vincent Lefevre for log files
|
|
We want to keep track of the state of a transaction overall to base
future decisions on it, but as a pre-requirement we have to make sure
that a transaction isn't commited twice (which happened if the download
of InRelease failed and Release takes over).
It also happened to create empty commits after a transaction was already
aborted in cases in which the Release files were rejected.
This isn't effecting security at the moment, but to ensure this isn't
happening again and can never be bad a bunch of fatal error messages are
added to make regressions on this front visible.
|
|
|
|
See https://github.com/systemd/systemd/issues/2956 - it appears that
`OnCalendar=*-*-* 6,18:00` and `OnCalendar=*-*-* 6:00,18:00` are
quite different.
Git-Dch: ignore
|
|
Closes: 819938
|
|
Git-Dch: Ignore
Reported-By: gcc -fsanitize=address
|
|
Hardly noticeable, but given that we have the option to easily enable
it, lets enable it as every newline in the message is written
individually by the code.
|
|
Some methods had it missing, some used the keyword directly, which isn't
a problem as it is a cc file, but for consistency lets stick to our
macro for now.
Git-Dch: Ignore
|
|
The rational is that we need to spread the load on the mirrors
that apt update and unattended-upgrades cause. To do so, we
leverage the RandomizeDelay feature of systemd. The other advantage
is that the timer is not run at a fixed daily.daily time but
instead every 24h. This also fixes the problem that the randomized
deplay in the current apt.cron.daily causes other cron jobs to
be deplayed.
A compatibility cron job is also provided for systems that do not
use systemd.
Note that the time is fired two times a day, but the logic inside
of apt.systemd.daily will ensure (via stamp files) that the
servers are hit at most every 24h. Firing two times a day helps
with the worst case update time and it also helps with systems
that are not always on.
LP: #246381, #727685
Closes: #600262, #709675, #663290
|
|
Introduces APT::Hashes::<NAME> with entries Untrusted and Weak
which can be set to true to cause the hash to be treated as
untrusted and/or weak.
|
|
Use msgtest and testsuccess with a function instead of failing
with a simple exit 1. This looks nicer.
Gbp-Dch: ignore
|
|
This gets rid of byte-range requests and 416 responses.
Gbp-Dch: ignore
|
|
This should make the test less flaky, as with a small file,
we might have already received all the data before trying
to apply rate limits which is a constant source of failure
on the i386 Ubuntu autopkgtest.
|
|
|
|
|
|
If the package is marked for removal, keep it marked for
removal and do not mark it for keep. If we mark it for keep,
we some how later get to a different stage where it is marked
for unpack instead of removal.
In the example in the bug report, we would get a:
SmartUnPack maas-region-controller-min:amd64 (replace version 2.0.0~alpha3+bzr4810-0ubuntu1 with Segmentation fault
maas-region-controller-min:amd64 was marked for removal, but
we changed it to keep and somehow it thinks that this is to
be replaced now instead of removed (probably because the
InstallVer != CandidateVer [with InstallVer = 0]).
This fixes a regression introduced in release 1.2.7, commit:
0390edd5452b081f8efcf412f96d535a1d959457
Reported-by: LaMont Jones on IRC
LP: #1562402
|
|
|
|
|
|
|
|
This avoids templates using StringView to be exported, such as
std::vector<StringView*>::emplace_back().
Gbp-Dch: ignore
|
|
Closes: 818950
|
|
Our own gpgv method can declare a digest algorithm as untrusted and
handles these as worthless signatures. If gpgv comes with inbuilt
untrusted (which is called weak in official terminology) which it e.g.
does for MD5 in recent versions we should handle it in the same way.
To check this we use the most uncommon still fully trusted hash as a
configureable one via a hidden config option to toggle through all of
the three states a hash can be in.
|
|
Using erase(pos) is invalid in our case here as pos must be a valid and
derefenceable iterator, which isn't the case for an end-iterator (like
if we had no good signature).
The problem runs deeper still through as VALIDSIG is a keyid while
GOODSIG is just a longid so comparing them will always fail.
Closes: 818910
|
|
There is really no need to have the same code three times.
Git-Dch: Ignore
|
|
On launchpad #1558484 a user reports that @ in the authentication tokens
parsing of sources.list isn't working in an older (precise) version. It
isn't the recommended way of specifying passwords and co (auth.conf is),
but we can at least test for regressions (and in this case test at all…
who was that "clever" boy disabling a test with exit……… oh, nevermind.
Git-Dch: Ignore
|
|
100% translated.
Note: this commit contains a message from the future. #818639
|
|
Otherwise, things will just start failing later down the stack,
because (a) the lazy getters do not check if building was successful
and (b) any further getter call would return the invalid object
anyway.
Also initialize VS in pkgCache to nullptr by default.
Closes: #818628
|
|
Note, 0 untran, 1 fuzzy, and the fuzzy string remains at Bug#818639.
|
|
There is no point in resolving all addresses to their names, this
just seriously slows the setup phase down. So just pass -n to not
resolve names anymore.
Gbp-Dch: ignore
|
|
This should make the test less flaky and hopefully fix the failure
on Ubuntu's armhf CI nodes.
Gbp-Dch: ignore
|
|
The test is a bit flaky. In order to get it less flaky, reduce
the speed in each run. To compensate for issues, start with a
higher speed level. Also increase the number of runs to 10.
Furthermore, http get the same multiple-run loop, and the log
files are changed to indicate the protocol being tested, as it's
not obvious which one fails if it fails in quiet mode.
Gbp-Dch: ignore
|
|
The epoch stripping in this code is done since day one, but in other
places we show a version epochs are not stripped. If epochs are present
in packages they tend to be an important information which we can't just
drop and especially can't drop "sometimes" as that confuses users and
tools alike – so even if removing code in use for (close to) 18 years
feels wrong, it is probably the right choice for consistency.
Closes: 818162
|
|
There was a complaint that, in the previous message,
the key fingerprint could be mistaken for a SHA1 digest
due to the (SHA1) after it.
Gbp-Dch: ignore
|
|
This makes the new GPG related warnings much nicer to read,
for example, the second one here replaces the first one:
W: gpgv:/var/lib/apt/lists/example.com_dists_stable_InRelease: Weak ...
W: http://example.com/dists/stable/InRelease: Weak ...
|
|
This should be easy to extend in the future and allow us to simplify
the error handling cases somewhat.
Thanks: Ron Lee for wording suggestions
|
|
This makes it easier to understand what really is an error
and what not.
|
|
For the non-pdiff case, we have can have accurate progress
reporting because after fetching the {,In}Release files we know
how many IndexFiles will be fetched and what size they have.
Therefore init the filesize early (in pkgAcqIndex::Init) and
ensure that in Acquire::Pulse() looks at already downloaded
bits when calculating the progress in Acquire::Pulse.
Also improve debug output of Debug::acquire::progress
|
|
Git-Dch: Ignore
|
|
|
|
The problemresolver will set the candidate version for pkg P back
to the current version if it encounters an impossible to satisfy
critical dependency on P. However it did not set the State of
the package back as well which lead to a situation where P is
neither in Keep,Install,Upgrade,Delete state.
Note that this can not be tested via the traditional sh based
framework. I added a python-apt based test for this.
LP: #1550741
[jak@debian.org: Make the test not fail if apt_pkg cannot be
imported]
|
