| Age | Commit message (Collapse) | Author |
|---|
|
Reported-By: gcc
Understandable: no
Git-Dch: Ignore
|
|
This is defined for compatibility, warning about it is intended, but
only in places where it is actually used, rather than at the place we
declare it for compatability…
Git-Dch: Ignore
|
|
Setting CXXFLAGS like --coverage on the commandline fails if we set the
std too late, so if we set it with the compiler name we set it always
first. A bit hacky as it bends the expectation, but seems to work.
Git-Dch: Ignore
|
|
Reported-By: scan-build
Git-Dch: Ignore
|
|
The tests usually run on amd64 boxes, but once in a while I run it on a
(slow) armel box as well, which has its fair share of problems with some
tests, but at least the low hanging fruits can be dealt with: Do not
assume that amd64 is the native dpkg architecture – instead use whatever
dpkg thinks is native as architecture for the test.
Git-Dch: Ignore
|
|
Our error reporting is historically grown into some kind of mess.
A while ago I implemented stacking for the global error which is used in
this commit now to wrap calls to functions which do not report (all)
errors via return, so that only failures in those calls cause a failure
to propergate down the chain rather than failing if anything
(potentially totally unrelated) has failed at some point in the past.
This way we can avoid stopping the entire acquire process just because a
single source produced an error for example. It also means that after
the acquire process the cache is generated – even if the acquire
process had failures – as we still have the old good data around we can and
should generate a cache for (again).
There are probably more instances of this hiding, but all these looked
like the easiest to work with and fix with reasonable (aka net-positive)
effects.
|
|
Git-Dch: Ignore
|
|
Figuring out after the fact what went wrong in the kernel hook is kinda
hart, also as the bugreports are usually very lacking on the details
front. Collecting the internal variables in the debug output we attach
to the generated file might help shine some light on the matter.
It's at least not going to hurt…
|
|
In private-install.cc we call MarkInstall with FromUser=true, which sets
the bit accordingly, but while applying the EDSP solution we call mark
install on all packages with FromUser=false, so MarkInstall believes
this install is an automatic one and sets it to auto – so that a new package
which is explicitely installed via an external solver is marked as auto
and is hence also up for garbage collection in a following call.
Ideally MarkInstall wouldn't reset it, but the detection is hard to do
without regressing in other cases – and ideally ideally MarkInstall
wouldn't deal with the autobit at all – so we work around this on the
calling side for now.
|
|
The parser creates a preferences as well as an extended states file
based on the EDSP scenario file, which isn't the most efficient way of
dealing with this as thes text files have to be parsed again by another
layer of the code, but it needs the least changes and works good enough
for now. The 'apt' solver is in the end just a test solver like dump.
|
|
These assumptions were once true, but they aren't anymore, so what is
supposed to be a speed up is effectively a slowdown [not that it would
be noticible].
Usage of SingleArchFindPkg was nuked in a stable update already as the
included assumption was actually harmful btw, which is why we should get
right of other 'non-harmful' but still untrue assumptions while we can.
Git-Dch: Ignore
|
|
This is basically a rewrite of the script with the general idea of
finding the Debian version of the installed kernels – as multiple
flavours will have the same Debian version – select the two newest of
them and translate them back to versions found in package names.
This way we avoid e.g. kernel and kernel-rt to use up the protected
slots even through they are basically the same kernel (just a different
flavour) so it is likely that if kernel doesn't work for some reason,
kernel-rt will not either.
This also deals with foreign kernel packages, kernels on hold and partly
installed kernels (in case multiple kernels are installed in the same
apt run) in a hopefully sensible way.
Closes: 787827
|
|
clang detects that fd isn't set in the ReadWrite case – just that this
is supposed to be catched earlier in this method already, but it doesn't
hurt to make it explicit here as well and clang is happy, too.
Git-Dch: Ignore
|
|
As said in the bugreport, this is hardly a serious problem on a security
front, but it was always on the list to have the filename configurable
somehow and the stable filename is a problem for parallel executions.
Using an environment variable (APT_EDSP_DUMP_FILENAME) for this is more
or less the best we can do here as solvers do not get told about our
configuration and such.
Closes: 795600
|
|
Pipes and such have no good Size value, but we still want to copy from
it maybe and we don't really need size as we can just as well read as
long as we get data out of a file to copy it.
Git-Dch: Ignore
|
|
The syntax of "Source" is different in EDSP compared to the the field of
the same name in 'the rest' of Debian, so documented this accordingly
and send the version as a new field.
|
|
How the Multi-Arch field and pkg:<arch> dependencies interact was
discussed at DebConf15 in the "MultiArch BoF". dpkg and apt (among other
tools like dose) had a different interpretation in certain scenarios
which we resolved by agreeing on dpkg view – and this commit realizes
this agreement in code.
As was the case so far libapt sticks to the idea of trying to hide
MultiArch as much as possible from individual frontends and instead
translates it to good old SingleArch. There are certainly situations
which can be improved in frontends if they know that MultiArch is upon
them, but these are improvements – not necessary changes needed
to unbreak a frontend.
The implementation idea is simple: If we parse a dependency on foo:amd64
the dependency is formed on a package 'foo:amd64' of arch 'any'. This
package is provided by package 'foo' of arch 'amd64', but not by 'foo'
of arch 'i386'. Both of those foo packages provide each other through
(assuming foo is M-A:foreign) to allow a dependency on 'foo' to be
satisfied by either foo of amd64 or i386. Packages can also declare to
provide 'foo:amd64' which is translated to providing 'foo:amd64:any' as
well.
This indirection over provides was chosen as the alternative would be to
teach dependency resolvers how to deal with architecture specific
dependencies – which violates the design idea of avoiding resolver
changes, especially as architecture-specific dependencies are a
cornercase with quite a few subtil rules. Handling it all over versioned
provides as we already did for M-A in general seems much simpler as it
just works for them.
This switch to :any has actually a "surprising" benefit as well: Even
frontends showing a package name via .Name() [which doesn't show the
architecture] will display the "architecture" for dependencies in which
it was explicitely requested, while we will not show the 'strange' :any
arch in FullName(true) [= pretty-print] either. Before you had to
specialcase these and by default you wouldn't get these details shown.
The only identifiable disadvantage is that this complicates error
reporting and handling. apt-get's ShowBroken has existing problems with
virtual packages [it just shows the name without any reason], so that
has to be worked on eventually. The other case is that detecting if a
package is completely unknown or if it was at least referenced somewhere
needs to acount for this "split" – not that it makes a practical
difference which error is shown… but its one of the improvements
possible.
|
|
Git-Dch: Ignore
|
|
We parse all architectures we encounter recently, which means we also
parse packages from architectures which are neither native nor foreign,
but still came onto the system somehow (usually via heavy force).
|
|
Previously we had python:any:amd64, python:any:i386, … in the cache and
the dependencies of an amd64 package would be on python:any:amd64, of an
i386 on python:any:i386 and so on. That seems like a relatively
pointless endeavor given that they will all be provided by the same
packages and therefore also a waste of space.
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
This should make things even more predictable.
Gbp-Dch: ignore
|
|
Git-Dch: ignore
|
|
This avoid the large diff we have that is mostly caused by the
line numbers changing in the po/pot files.
|
|
|
|
|
|
"apt-ftparchive release" will create the by-hash files if
this mode is enabled. This maybe unexpected by existing users
so make it a opt-in.
Git-Dch: ignore
|
|
Git-Dch: ignore
Brown-paperbag: yes
Thanks: Donkult
|
|
This option is enabled via the APT::FTPArchive::DoByHash switch.
It will also honor the option APT::FTPArchive::By-Hash-Keep that
controls how many previous generation of by-hash files should be
kept (defaults to 3).
Merged from https://github.com/mvo5/apt/tree/feature/apt-ftparchive-by-hash
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Initializing a random number generator with the time since epoch could
be good enough, but reaches its limits in test code as the 100
iterations might very well happen in the same second and hence the seed
number is always the same… clock() has a way lower resolution so it
changes more often and not unimportant: If many users start the update
at the same time it isn't to unlikely the SRV record will be ordered in
the same second choosing the same for them all, but it seems less likely
that the exact same clock() time has passed for them.
And if I have to touch this, lets change a few other things as well to
make me and/or compilers a bit happier (clang complained about the usage
of a GNU extension in the testcase for example).
|
|
We want to declare some hashes as not enough for security, so that a
user will need --allow-unauthenticated or similar to get data secured
only by those hashes, but we can still us these hashes for integrity
checks if we got them.
|
|
The md5sum hash is broken since some time and we should no longer
consider it a usable hash. Also update the tests to reflect this.
|
|
Various smaller improvements so that the check deals better with already
downloaded files, relative paths and other things.
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
testsuccess checks the return code, but it does also some autotests
based on the command like grepping for dpkg warnings in a apt-get
install call – but if this finds something it is just showing the grep
command. With this change it will additionally show the first msgtest
which in this case will detail the actual apt-get install call.
Git-Dch: Ignore
|
|
Not-quiet output is very verbose and with our growing array of tests
generates many many lines which e.g. kills the log display in travis-ci
and obscures failures and uncatched output in a wall of details.
The -q mode fixed this by callapsing passed tests to a single P and now
with some rework we can even get failures properly displayed with the
message from msgtest.
Git-Dch: Ignore
|
|
Reported-By: gcc
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
The file method was already slowed down and somehow I thought I had done
the same for http, but it turns out that I didn't. Giving it the same
delay as file should help in making this test slower and therefore more
likely to successfully test what it is supposed to test.
Git-Dch: Ignore
|
|
Closes: #783337
Thanks: Christian for all the l10n, code & social contributions!
|
|
Closes: 797329
|
|
Git-Dch: Ignore
|
|
We had a very similar method previously for our own private usage, but
with some generalisation we can move this check into the acquire system
proper so that all frontends profit from this compatibility change.
As we are disabling a security feature here a warning is issued and
frontends are advised to consider reworking their download logic if
possible.
Note that this is implemented as an all or nothing situation: We can't
just (not) drop privileges for a subset of the files in a fetcher, so in
case you have to download some files with and some without you need to
use two fetchers.
|
|
Using libpam-tmpdir caused us to create our download tmp directory in
root's private tmp before changing to _apt, which wouldn't have access
to it.
By extending our GetTempDir method with an optional wrapper changing the
effective user, we can test if a given user can access the directory and
ignore TMPDIR if not instead of ignoring TMPDIR completely.
Closes: 797270
|
|
Multiple targets downloading the same file is bad™ as it leads us to all
sorts of problems like the acquire system breaking or simply a problem
of which settings to use for them. Beside that this is most likely a
mistake and silently ignoring it doesn't help the user realizing his
mistake…
On the other hand, we have 'duplicates' which are 'created' by how we
create indextargets, so we have to prevent those from being created to
but do not emit a warning for them as this is an implementation detail.
And then, there is the absolute and most likely user mistake: Having the
same target(s) activated in multiple entries.
|
|
|
