| Age | Commit message (Collapse) | Author |
|---|
|
Yay, newer server
Gbp-Dch: ignore
|
|
Fixes a warning reported by gcc.
Gbp-Dch: ignore
|
|
This fixes a warning reported by gcc.
Gbp-Dch: ignore
|
|
With the package names now normalized to lower case, the caches
of affected systems need to be rebuild. Adjust the minor version
to trigger such a rebuild.
Gbp-Dch: ignore
|
|
dpkg does that when reading package files, so we should do
the same. This only deals with parsing names from binary
package paragraphs, it does not look at source package names
and/or the list of binaries in a dsc file.
Closes: #807012
|
|
Gbp-Dch: ignore
|
|
required and important were swapped, leading to wrong
output.
Closes: #807523
Thanks: Manuel A. Fernandez Montecelo for discovering this
|
|
|
|
Gbp-Dch: ignore
|
|
We need to pass 0llu instead of 0 as the init value, otherwise
std::accumulate will calculate with ints.
Reported-by: Raphaël Hertzog
|
|
In e75e5879 'replace "which" with "command -v" for portability' I missed
that command -v isn't actually required to be available in debian, so
for the 5 files we are using it:
Two (abicheck/run_abi_test & test/integration/framework) are called in
environments were I believe sh is at least dash or 'better' as the first
one is "interactive" for apt developers and the later is sourced by ~200
tests in the same directory run by hand and ci-services – for the later
we have pulled some uglier hacks for worser things already, so if there
should actually end up needing something more compatible we will notice
eventually (and the later actually had a command -v call for some time
already and nobody came running).
debian/rules and debian/apt.cron.daily I switched back to which as that
is more or less debian-specific or at least highly non-critical.
That leaves cmdline/apt-key.in with a bunch of calls where I will
implement that functionality in shell as this is relatively short-lived
as it is used to detect wget (for net-update, which Michael wants to
revive and in that process will properly use apt-helper instead of wget)
and to detect gpg vs. gpg2 systems, where the earlier is supposed to go
away in the longrun (or the later, but by replacing the earlier…).
[and this gpg/gpg2 detection is new in sid, so I have some sympathy for
that being a problem now.]
Thanks: Jakub Wilk for pointing out #747320
|
|
After e75e5879 the reason for an implicit dependency on debianutils
(which is essential for debian, but likely not on other systems) was
just two uses of run-parts, which can be replaced with the a lot more
portable find-piped-into-sort duo.
|
|
which is a debian specific tool packaged in debianutils (essential)
while command is a shell builtin defined by POSIX.
Closes: 807144
Thanks: Mingye Wang for the suggestion.
|
|
Include <stdlib.h> to ensure that atoi(3) is defined to improve
general portability and fix a specific build failure on Android.
Closes: 807031
|
|
This should make it more obvious that CHANGEPATH is a placeholder which
apt will replace with a package specific path rather than a string
constant.
Mail-Reference: <87d1upgvaf.fsf@deep-thought.43-1.org>
Mail-Archive: https://lists.debian.org/debian-dak/2015/12/msg00005.html
|
|
'Regression' of 7d19ee92f2368a40e739cb27d22d6d28f37ebf45, just that it
now works more as expected than previously. Of course, build-essentials
are implicitly also build dependencies, so by definition all packages
have build dependencies, but that isn't what this message wants to say
and it isn't what the user expects.
Git-Dch: Ignore
|
|
Otherwise a user is subject to unexpected content-injection depending on
which directory she happens to start apt in. This also cleans up the code
requiring less implementation details in build-dep which is always good.
Technically, this is an ABI break as we override virtual methods, but
that they weren't overridden was a mistake resulting in pure classes,
which shouldn't be pure, so they were unusable – and as they are new in
1.1 nobody is using them yet (and hopefully ever as they are borderline
implementation details).
Closes: 806693
|
|
There is no need to check configured build-essentials for each package,
doing it once at the start ought to be enough.
Git-Dch: Ignore
|
|
Lets do this non-behaviour change before we modify the source for real
as the reflow and moving would otherwise hide all the interesting changes.
Git-Dch: Ignore
|
|
You could think a0bf789783ea283914d059aea0f4d0f77d6bbaaf would be
enough, but it turns out its only half of the puzzle.
Closes: 806765
Suggested-By: Julian Andres Klode <jak@debian.org>
|
|
With the 1.1.3 release we have seen some re-ordering of the
translation template and the translations. It turns out that
this is because sort sorts differently depending on the locale,
so let's force it to always sort in the C locale.
|
|
Git-dch: ignore
|
|
As we ship some tools in apt-utils which depend on our private library
we have to ensure that apt-utils depends on a proper apt version.
An exact version is probably a bit much, but the simplest way out.
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Regression of 14341a7ee1ca3dbcdcdbe10ad19b947ce23d972d.
Reported-By: Julian Andres Klode <jak@debian.org>
|
|
Git-Dch: Ignore
|
|
The relevant testcases are in test/integration/test-apt-get-source.
There is a test for #731853 that is supposed to "ensure that apt will
pick the higher version number" of 0.0.1 (stable) and 0.1 (stable).
However, this works by pure chance, as simply reversing the order
of the two insertsource lines makes the test fail.
So #731853 isn't really fixed, yet.
Actually, that's related to the problem I reported, as the underlying
issue for both is the same:
In the FindSrc function apt chooses a new 'best hit', if either
* there is a target release and it matches the release of the package,
* or the version of the package is higher than the last best hit.
Consider having 1.0 (stable), 2.0 (unstable) and 1.5 (unstable),
in this order.
Looking for the version in stable, apt first selects 1.0, because the
release matches the target release, but then subsequently selects 2.0,
because the version is higher.
Looking for the version in unstable, apt first selects 2.0, because the
release matches the target release, but then subsequently selects 1.5,
because the release also matches the target release.
The correct way would be to choose a new 'best hit', if either
* there is a target release and it matches the release of the package,
* or there is no target release
and the version is higher than the last best hit.
Closes: 746412
Mail-Reference: <565A604B.7090104@googlemail.com>
Mail-Archive: https://lists.debian.org/debian-devel/2015/11/msg00470.html
|
|
Passing function pointers around while working on this was very icky,
but if weak symbols are too much to ask for…
Reverts "do not use "-Wl,-Bsymbolic-functions" during the build to avoid
breakage" aka a5fc9be36211a290a7abc3ca2a8bf98943bc1f57.
|
|
The implementation changed in
495b7a615a2d8f485beadf88c6ed298f5bbe50c2
Git-Dch: Ignore
Reported-By: Julian Andres Klode <jak@debian.org>
|
|
|
|
This reverts commit 7ac9386cb6e272625490fcf3e8183b45e28bbc43.
|
|
|
|
This reverts commit 28f24d3dad1844af316337d565ba2ebc11c8ce97.
This fails on Ubuntu as they build with -Bsymbolic-functions.
|
|
ssh expects various configuration bits to be usable like known hosts,
possibly keys and co. Setting this up needs some user work for probably
not a whole lot of benefits, so instead of forcing it upon users on
upgrade disable dropping for it by default.
Closes: 806511
|
|
Regression intoduced in 23e64f6d0facf9610c1042326ad9850e071e8349
|
|
Dropping privileges is an involved process for code and system alike so
ideally we want to verify that all the work wasn't in vain. Stuff
designed to sidestep the usual privilege checks like fakeroot (and its
many alternatives) have their problem with this through, partly through
missing wrapping (#806521), partly as e.g. regaining root from an
unprivileged user is in their design. This commit therefore disables
most of these checks by default so that apt runs fine again in a
fakeroot environment.
Closes: 806475
|
|
This also deals with the unlikely case of groups being mentioned
multiple times or if the effective group isn't mentioned at all.
In practice, it is a debugging aid through like for #806475.
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
debci seems to have a cleaner environment now and even if not we could
never guess nogroup, so figure it out properly via 'id'.
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Seems like a simpler workaround than forcing a lower optimization
level just for this for all of apt.
See also:
https://bugs.launchpad.net/ubuntu/+source/gcc-5/+bug/1473674
|
|
Git-Dch: Ignore
|
|
|
|
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Closes: #806422
|
|
Git-Dch: Ignore
|
|
Git-Dch: ignore
|
