summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-10-23tests: support 'installed' release in insertpackageDavid Kalnischkies
It is sometimes handy to have an installed package also in the archive, but this was until now harder than it should as you had to duplicate the lines, which is especially dangerous while writing the tests as it easily happens that these two lines divert and so the same-but-different version detection kicks in. Git-Dch: Ignore
2014-10-23switch tests to Translation-en usageDavid Kalnischkies
We can use either and some tests exercise this, but the default should be what we want to use and that is a split out long description file which is properly mentioned in the Release file. Git-Dch: Ignore
2014-10-23add test for Basic Authentication schemeDavid Kalnischkies
Git-Dch: Ignore
2014-10-23chown finished partial files earlierDavid Kalnischkies
partial files are chowned by the Item baseclass to let the methods work with them. Now, this baseclass is also responsible for chowning the files back to root instead of having various deeper levels do this. The consequence is that all overloaded Failed() methods now call the Item::Failed base as their first step. The same is done for Done(). The effect is that even in partial files usually don't belong to _apt anymore, helping sneakernets and reducing possibilities of a bad method modifying files not belonging to them. The change is supported by the framework not only supporting being run as root, but with proper permission management, too, so that privilege dropping can be tested with them.
2014-10-22check that auth.conf exists before chowning itDavid Kalnischkies
Git-Dch: Ignore
2014-10-21Ensure /etc/apt/auth.conf has _apt:root ownerMichael Vogt
Ensure in SetupAPTPartialDirectory() that the /etc/apt/auth.conf file can be read by the priv sep apt methods.
2014-10-21debian/apt.postinst: chown _apt:root /etc/apt/auth.confMichael Vogt
If the methods drop privileges we need to ensure that /etc/apt/apt.conf is still readable by the _apt user.
2014-10-20test if TMPDIR is accessible before usingDavid Kalnischkies
Private temporary directories as created by e.g. libpam-tmpdir are nice, but they are also very effective in preventing our priviledge dropping to work as TMPDIR will be set to a directory only root has access to, so working with it as _apt will fail. We circumvent this by extending our check for a usable TMPDIR setting by checking access rights. Closes: 765951
2014-10-20testcases: do not allow warnings in testsuccessDavid Kalnischkies
Adds a new testwarning which tests for zero exit and the presents of a warning in the output, failing if either is not the case or if an error is found, too. This allows us to change testsuccess to accept only totally successful executions (= without warnings) which should help finding regressions. Git-Dch: Ignore
2014-10-20check for failure message in testsuccess/failureDavid Kalnischkies
These functions check the exit code of the command, but for apt commands we can go further and require an error message for non-zero exits and none for zero exits. Git-Dch: Ignore
2014-10-20use c++ style instead of the last two c-arraysDavid Kalnischkies
Git-Dch: Ignore
2014-10-20check lists/ content in tests doing rollbackDavid Kalnischkies
Git-Dch: Ignore
2014-10-20autorun permission tests for all apt-get update callsDavid Kalnischkies
Adds some infrastructure to run tests automatically for certain commands. The first command being 'apt-get update' (and 'apt update') which check for correct permission and owner of the files in lists/. Git-Dch: Ignore
2014-10-20aborted reverify restores file owner and permissionDavid Kalnischkies
If we get an IMS hit for an InRelease file we use the file we already have and pass it into reverification, but this changes the permissions and on abort of the transaction they weren't switched back. This is now done, additionally, every file in partial which hasn't failed gets permission and owner changed for root access as well, as it is very well possible that the next invocation will (re)use these files.
2014-10-20run acquire transactions only onceDavid Kalnischkies
Transactions are run and completed from multiple places, so it happens for unsigned repos that the Release file was commited even if it was previously aborted (due to --no-allow-insecure-repositories). The reason is simply that the "failure" of getting an InRelease/Release.gpg is currently ignored, so that the acquire process believes that nothing bad happened and commits the transaction even though the same transaction was previously aborted.
2014-10-20mark --allow-insecure-repositories message as translateableDavid Kalnischkies
Refactors a bit to ensure the same message is used in all three cases as well. Git-Dch: Ignore
2014-10-20reenable support for -s (and co) in apt-get sourceDavid Kalnischkies
The conversion to accept only relevant options for commands has forgotten another one, so adding it again even through the usecase might very well be equally good served by --print-uris. Closes: 742578
2014-10-15releasing package apt version 1.1~exp71.1.exp7Michael Vogt
2014-10-15ignore Acquire::GzipIndexes for cdrom sourcesDavid Kalnischkies
We do not support compressed indexes for cdrom sources as we rewrite some of them, so supporting it correctly could be hard. What we do instead in the meantime is probably disabling it for cdrom sources.
2014-10-15Merge branch 'debian/sid' into debian/experimentalDavid Kalnischkies
The acquire code changed completely, so this is more an import of the testcase and a new fix than the merge of an existent fix. Conflicts: apt-pkg/acquire-item.cc
2014-10-15don't cleanup cdrom files in apt-get updateDavid Kalnischkies
Regression from merging 801745284905e7962aa77a9f37a6b4e7fcdc19d0 and b0f4b486e6850c5f98520ccf19da71d0ed748ae4. While fine by itself, merged the part fixing the filename is skipped if a cdrom source is encountered, so that our list-cleanup removes what seems to be orphaned files. Closes: 765458
2014-10-15releasing package apt version 1.1~exp61.1.exp6Michael Vogt
2014-10-15check for available space, excluding root reserved blocksDavid Kalnischkies
We are checking the space requirements for ages, but the check uses the free blocks count, which includes the blocks reserved for usage by root. Now that we use an unprivileged user it has no access to these blocks anymore – and more importantly these blocks are a reserve, they shouldn't be used by apt without special encouragement by the user as it would be bad to have dpkg run out of diskspace and maintainerscripts like man-db skip certain actions if not enough space is available freely.
2014-10-15set PR_SET_NO_NEW_PRIVS even if sandbox is disabledDavid Kalnischkies
Similar to 8f45798d532223adc378a4ad9ecfc64b3be26e4f, there is no harm to set this, even if we don't drop privileges. Git-Dch: Ignore
2014-10-15testcases runable as rootDavid Kalnischkies
Running the testcases is usually not a good idea, but it can be handy to check if the privilege dropping works. Git-Dch: Ignore
2014-10-15don't drop privileges if _apt has not enough rightsDavid Kalnischkies
Privilege dropping breaks download/source/changelog commands as they require the _apt user to have write permissions in the current directory, which is e.g. the case in /tmp, but not in /root, so we disable the privilege dropping if we deal with such a directory based on idea and code by Michael Vogt. The alternative would be to download always to a temp directory and move it then done, but this breaks partial file support. To resolve this, we could move to one of our partial/ directories, but this would require a lock which would block root from using two of these commands in parallel. As both seems unacceptable we instead let the user choose what to do: Either a directory is setupped for _apt, downloading as root is accepted or – which is potentially even better – an unprivileged user is used for the commands.
2014-10-14Add new configallowinsecurerepositories to the test frameworkMichael Vogt
Add a new configallowinsecurerepositories that controls the value of Acquire::AllowInsecureRepositories for the tests. Set it to "false" for most of the testsuite and only enable it where its really needed. We want to switch the default for this post-jessie.
2014-10-14Merge branch 'debian/sid' into debian/experimentalMichael Vogt
2014-10-13releasing package apt version 1.1~exp51.1.exp5Michael Vogt
2014-10-13Change default of Acquire::AllowInsecureRepositories to "true"Michael Vogt
This change is made for backward compatiblity and should be reverted once jessie is out.
2014-10-13update symbols fileDavid Kalnischkies
Git-Dch: Ignore
2014-10-13do not load filesize in pkgAcqIndexTrans explicitlyDavid Kalnischkies
The constructor is calling the baseclass pkgAcqIndex which does this already – and also does it correctly for compressed files which would overwise lead to the size of uncompressed files to be expected. Git-Dch: Ignore
2014-10-13fix compile and tests errorDavid Kalnischkies
I am pretty sure I did that before committing broken stuff… Git-Dch: Ignore
2014-10-13Fix backward compatiblity of the new pkgAcquireMethod::DropPrivsOrDie()Michael Vogt
Do not drop privileges in the methods when using a older version of libapt that does not support the chown magic in partial/ yet. To do this DropPrivileges() now will ignore a empty Apt::Sandbox::User. Cleanup all hardcoded _apt along the way.
2014-10-13Document ↵Michael Vogt
Acquire{MaxReleaseFileSize,AllowInsecureRepositories,AllowDowngradeToInsecureRepositories} and --no-allow-insecure-repositories Document the new options to restrict loading unauthenticated data into our parsers.
2014-10-13trusted=yes sources are secure, we just don't know whyDavid Kalnischkies
Do not require a special flag to be present to update trusted=yes sources as this flag in the sources.list is obviously special enough. Note that this is just disabling the error message, the user will still be warned about all the (possible) failures the repository generated, it is just triggering the acceptance of the warnings on a source-by-source level. Similarily, the trusted=no flag doesn't require the user to pass additional flags to update, if the repository looks fine in the view of apt it will update just fine. The unauthenticated warnings will "just" be presented then the data is used. In case you wonder: Both was the behavior in previous versions, too.
2014-10-13do not inline virtual destructors with d-pointersDavid Kalnischkies
Reimplementing an inline method is opening a can of worms we don't want to open if we ever want to us a d-pointer in those classes, so we do the only thing which can save us from hell: move the destructors into the cc sources and we are good. Technically not an ABI break as the methods inline or not do the same (nothing), so a program compiled against the old version still works with the new version (beside that this version is still in experimental, so nothing really has been build against this library anyway). Git-Dch: Ignore
2014-10-13display a warning for unsigned reposDavid Kalnischkies
The same message is used for InRelease if fails in gpgv, but the Release/Release.gpg duo needs to handle the failing download case as well (InRelease just defers to the duo if download fails) and print a message accompaning the insecure error to provide a hint on what is going on.
2014-10-13make --allow-insecure-repositories message an errorDavid Kalnischkies
Not using this option, but using unsigned (and co) repositories will cause these repositories to be ignored and data acquiring from them fails, so this is very well in the realms of an error and helps in making 'apt-get update' fail with a non-zero error code as well.
2014-10-10remove useless pdiff filename outputDavid Kalnischkies
Looks like a leftover from debugging. Absolutely no need for it and destroys progess reporting completely. Closes: 764737
2014-10-08Only rename StatError files in AbortTransaction()Michael Vogt
This fixes a race that we see in travis when two copy operations finish at about the same time but the bad one first. This lead to a rename of the good one and triggers a error when apt tries to verify the good version but can no longer find it.
2014-10-08Update Status field values handlingGuillem Jover
Remove long obsolete (hold, hold-reinstreq, removal-failed) or just wrong (post-inst-failed vs postinst-failed) values, that have been autoconverted by dpkg at run-time to their new equivalents, so there should not be any such instance in any recent system (removal-failed since dpkg 1.1.4 in Apr 1996, hold and hold-reinstreq since dpkg 1.2.0 in May 1996). dpkg even stopped doing the mapping in 1.15.4 and 1.15.8 respectively. At the same time sort the list in the same order as they appear in the dpkg code.
2014-10-08methods/rsh.cc: replace strcat with std::stringMichael Vogt
Instead of using strcat use a C++ std::string to avoid overflowing this buffer. Thanks to David Garfield Closes: #76442
2014-10-08add CVE-2014-7206 to 1.0.9.2Michael Vogt
2014-10-08releasing package apt version 1.1~exp41.1.exp4Michael Vogt
2014-10-08prepare 1.1~exp4Michael Vogt
2014-10-08Fix ServerMethod::FindMaximumObjectSizeInQueue()Michael Vogt
Git-Dch: ignore
2014-10-08pkgAcqArchive::QueueNext(): change owner/permission of DestFileMichael Vogt
The code was using FinalFile before but we only test the existance of DestFile so we use that instead.
2014-10-08Merge branch 'debian/sid' into debian/experimentalMichael Vogt
Conflicts: debian/changelog
2014-10-08Merge remote-tracking branch 'mvo/feature/expected-size' into ↵Michael Vogt
debian/experimental