| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
|
|
|
|
Otherwise the "WARNING: The following packages cannot be authenticated!"
messages does not include the architecture of the package, so it would
be slightly misinformative.
|
|
They tend to be ugly to look at, so hide them.
Git-Dch: Ignore
|
|
We have xz/lzma support for a while, but only via an external binary
provided by xz-utils. Now that the Debian archive provides xz by default
and dpkg pre-depends on the library provided by liblzma-dev we can switch
now to use this library as well to avoid requiring an external binary.
For now the binary is in a prio:required package, but this might change
in the future.
API wise it is quiet similar to bz2 code expect that it doesn't provide
file I/O methods, so we piece this together on our own.
|
|
Not very useful in the normal operation of work, but handy for tests.
Git-Dch: Ignore
|
|
The framework can be configured to use different compression algorithms
to test different ones, but a testcase testing for gz support should
always be run with gz, regardless of what compressions are configured
otherwise.
Git-Dch: Ignore
|
|
Beside fixing this minor code duplication it also resolves the problem
of messing up vim syntax-highlighting.
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
In #737085 we see that apt can be confused if informations about
versions only differ slightly. This commit adds a way of at least adding
a few more data points with the next abi break to help a bit with it.
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Mostly ensures that we use the build methods and not the system
provided methods in the tests (if we don't want it that way).
Git-Dch: Ignore
|
|
As we deal with regex matchers here the dots are treated as wildcards if
we don't take care of escaping them. Not very likely that this could be
a real-world problem, but just to be sure.
|
|
Pre-build kernel modules (like those build with module-assistent) are
commonly named in this way and it should be ungeneric enough to be added
by default for everyone.
|
|
kfreebsd as well as hurd kernel packages call the postinst script as
well so we just need to enable the correct parsing for installed
packages and disable the "protect every version" hammer for them.
|
|
With APT::VersionedKernelPackages users have the option of adding
packages like pre-build out-of-tree modules to the list of automatically
protected from being autoremoved.
|
|
|
|
Git-Dch: Ignore
|
|
fixes some messages and their translation so that all of them have three
dots for messages with an elipse. Many translations already had this.
|
|
Description of the --install-suggests option is wrong in the polish
apt-get man page. The actual meaning of this option is the opposite
to what is written in the manual.
Closes: 741056
|
|
Old code limited lines to 250 characters which is probably enough for
everybody, but who knows… It also takes care of device nodes which start
with the same prefix.
|
|
Git-Dch: Ignore
|
|
The preparation code to deal with auto-detection and co is the same for
both methods, so not sharing them would be bad. Deals also with the
prevention of side effects triggered by the auto-detection like
disabling mounting for the fallback.
Git-Dch: Ignore
|
|
Commit 62dcbf84 changed the code of ident to look more like the code for
add on my suggestion. This made ident interactive as it starts with a
unmount, press enter, mount cycle. The first two are skipped now.
This fixes d-i/apt-setup which is using it to get ID as well as label.
Closes: 740673
|
|
The mountpoint might be auto-generated by the mount command so pushing
an error on the stack will confuse the following code and let it believe
an unrecoverable error occured while potentially everything is okay.
Same goes for umount as a non-existing mountpoint is by definition not
mounted.
|
|
Checking that parent-directory of mountpoint and mountpoint are on
different devices is fine most of the time, but is too restrictive
for our testcases and there shouldn't be anything wrong with 'normal'
users copying disk-contents around either if they want to.
We check for the existance of the ".disk/" directory now as this will
not be present if the disk isn't 'mounted'. Disks doesn't need to have
such a directory through, so for those we fall back to the old way of
detecting mounted or not mounted.
|
|
Git-Dch: Ignore
|
|
The unpack of a M-A:same package will force the unpack of all its
siblings directly to prevent that they could be separated by later
immediate actions. In commit 634985f8 a call to SmartConfigure was
introduced to configure these packages at the time the installation
order encounters them. Usually, the unpack order is already okay, so
that this 'earlier' unpack was not needed and if it wouldn't have been
done, the package would now only be unpacked, but by configuring the package
now we impose new requirements which must be satisfied. The code is
clever enough to handle this most of the time (it worked for 2 years!),
but it isn't needed and in very coupled cases this can fail.
Removing this call again removes this extra burden and so simplifies the
ordering as can be seen in the modified tests. Famous last words, but I
don't see a reason for this extra burden to exist hence the remove.
Closes: 740843
|
|
Now that the last few commits resolved the issues we can finally enable
a bunch of compiler warnings by default.
Git-Dch: ignore
|
|
The warning message from gcc doesn't make that much sense in my reading
as there is no loop which could overflow here, but it is better to use
our SPtrArray wrapping anyway which fixes the warning as well.
warning: cannot optimize loop, the loop counter may overflow [-Wunsafe-loop-optimizations]
delete[] Dsc;
Git-Dch: Ignore
Reported-By: gcc -Wunsafe-loop-optimizations
|
|
Git-Dch: Ignore
Reported-By: gcc -Wsuggest-attribute={pure,const,noreturn}
|
|
Beside being a bit cleaner it hopefully also resolves oddball problems
I have with high levels of parallel jobs.
Git-Dch: Ignore
Reported-By: iwyu (include-what-you-use)
|
|
also adds namespaced attributes for good usage
Git-Dch: Ignore
|
|
Reported-By: gcc -Wunused-parameter
Git-Dch: Ignore
|
|
Reported-By: gcc -Wignored-qualifiers
Git-Dch: Ignore
|
|
[-Wunsafe-loop-optimizations]
Git-Dch: Ignore
Reported-By: gcc -Wunsafe-loop-optimizations
|
|
Git-Dch: Ignore
Reported-By: gcc -Wmissing-declarations
|
|
Git-Dch: Ignore
Reported-By: gcc -Wuseless-cast
|
|
Git-Dch: Ignore
Reported-By: gcc -Wcast-qual
|
|
server.cc: In member function ‘bool ServerState::HeaderLine(std::string)’:
server.cc:198:72: warning: format ‘%llu’ expects argument of type ‘long long unsigned int*’, but argument 3 has type ‘long long int*’ [-Wformat=]
else if (sscanf(Val.c_str(),"bytes %llu-%*u/%llu",&StartPos,&Size) != 2)
Git-Dch: Ignore
Reported-By: gcc -Wpedantic
|
|
Git-Dch: Ignore
Reported-By: gcc -Wpedantic
|
|
Git-Dch: Ignore
Reported-By: gcc -Wpedantic
|
|
Git-Dch: Ignore
Reported-By: gcc
|
|
Reported-By: gcc
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
