summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-09-27support gnupg2 as drop-in replacement for gnupgDavid Kalnischkies
If both are available APT will still prefer gpg over gpg2 as it is a bit more lightweight, but it shouldn't be a problem to use one or the other (at least at the moment, who knows what will happen in the future).
2014-09-27delay gnupg setup in apt-key until it is neededDavid Kalnischkies
'apt-key help' and incorrect usage do not need a functioning gnupg setup, as well as we shouldn't try to setup gnupg before we actually test if it is available (and print a message if it is not).
2014-09-27correct the error messages to refer to apt-key instead of gpgvDavid Kalnischkies
Git-Dch: Ignore
2014-09-27use apt-key adv (+ gnupg) instead of gpgv for verifyDavid Kalnischkies
apt-key does the keyring merge as we need it, so we just call it instead of reimplementing it to do the merging before gpgv. This means we don't use gpgv anymore (we never depended on it explicitly - bad style), but it also means that the message in apt-cdrom add is a bit less friendly as it says loudly "untrusted key", but for a one-time command its okay.
2014-09-27merge fragment keyrings in apt-key to avoid hitting gpg limitsDavid Kalnischkies
gnupg has a hardlimit of 40 (at the moment) keyrings per invocation, which can be exceeded with (many) repositories. That is rather misfortune as the longrun goal was to drop gnupg dependency at some point in the future, but this can now be considered missed and dropped. It also means that 'apt-key adv' commands might not have the behaviour one would expect it to have as it mainly operates on a big temporary keyring, so commands modifying keys will break. Doing this was never a good idea anyway through, so lets just hope nothing break too badly. Closes: 733028
2014-09-27refactor key removal code to reuse it in next stepDavid Kalnischkies
Git-Dch: Ignore
2014-09-27set a primary-keyring only if we have access to itDavid Kalnischkies
2014-09-27support (multiple) arguments properly in apt-keyDavid Kalnischkies
2014-09-27only create new trusted.gpg if directory is writeableDavid Kalnischkies
2014-09-27all errors should be printed to stderrDavid Kalnischkies
Git-Dch: Ignore
2014-09-27add a (hidden) --quiet option for apt-keyDavid Kalnischkies
2014-09-27rename postrm to apt.postrmDavid Kalnischkies
It helps in identifying its affiliation. Also removes the old postinst which was hidden by apt.postinst for a long time now and would just install a sources.list in edgecases which is probably not a good idea (e.g. on my system /etc/apt/sources.list does not exist). It is better done by the installer of the distro. Git-Dch: Ignore
2014-09-27remove leftover debug output from multikey softlinkDavid Kalnischkies
Git-Dch: Ignore
2014-09-27fix: warning: extra ‘;’ [-Wpedantic]David Kalnischkies
Reported-By: gcc -Wpedantic Git-Dch: Ignore
2014-09-27fix: Member variable 'X' is not initialized in the constructor.David Kalnischkies
Reported-By: cppcheck Git-Dch: Ignore
2014-09-27fix occurrence typo in tagfile commentDavid Kalnischkies
Reported-By: codespell Git-Dch: Ignore
2014-09-27remove outdated and unused po/ChangeLogDavid Kalnischkies
Git-Dch: Ignore
2014-09-27add an API for cache filters/matcherDavid Kalnischkies
A lot of code deals with iterating over packages and checking for specific states. At the moment these are all handcrafted inplace, but that makes sharing common code which just differs in the states it checks rather difficult and is error prune. Having an API to construct arbitrary complex filters will come in handy for those. Git-Dch: Ignore
2014-09-27move PCI::From* methods into CacheSetHelper classDavid Kalnischkies
The methods itself deal with the helper a lot, so it makes sense to move them to the helper itself, which helps also if we want to override some of these methods, the FromString mentioned in the bugreport being the obvious example. VCI is spared from this change for now as while it would fit with the same reasoning it much heavier entangled with the previous CacheSetHelper change, so moving it now would mean breaking the API. The PCI change is worthwhile on its own though as it is used by VCI. Closes: 686221
2014-09-27adapt to the new CacheSetHelper APIDavid Kalnischkies
Git-Dch: Ignore
2014-09-27rework cachesets API to allow future extensionDavid Kalnischkies
The introduction of Fnmatch showed that each new selector would require multiple new virtual methods in the CacheSetHelper to work correctly, which isn't that great. We now flip to a single virtual method which handles all cases separated by an enum – as new enum values can be added without an ABI break. Great care was taken to make old code work with the new way of organisation, which means in return that you might be bombarded with deprecation warnings now if you don't adapt, but code should still compile and work as before as can be seen in apt itself with this commit. Git-Dch: Ignore
2014-09-27add APT::PackageUniverse as a pkgCache wrapperDavid Kalnischkies
Git-Dch: Ignore
2014-09-27add specialisations for std::vectorDavid Kalnischkies
Git-Dch: Ignore
2014-09-27mark pkg(All|Dist)Upgrade as deprecatedDavid Kalnischkies
The comment above their definition marks them already as such, so this is only a formalisation of the deprecation and fixes the occurances we have in our own code together with removing a magic number. Git-Dch: Ignore
2014-09-27fix progress output for (dist-)upgrade calculationDavid Kalnischkies
Previously, we had a start and a done of the calculation printed by higher-level code, but this got intermixed by progress reporting from an external solver or the output of autoremove code… The higherlevel code is now only responsible for instantiating a progress object of its choosing (if it wants progress after all) and the rest will be handled by the upgrade code. Either it is used to show the progress of the external solver or the internal solver will give some hints about its overall progress. The later isn't really a proper progress as it will jump forward after each substep, but that is at least a bit better than before without any progress indication. Fixes also the 'strange' non-display of this progress line in -q=1, while all others are shown, which is reflected by all testcase changes.
2014-09-27de-duplicate version strings in the cacheDavid Kalnischkies
Turns out that version numbers aren't as random as you might guess. In my cache for example, I have: Total package names: 69513 (1390 k) Total package structures: 188259 (9036 k) Total distinct versions: 186345 (13.4 M) Total dependencies: 2052242 (57.5 M) which amounts to 1035873 (10,1 M) strings. Reusing version strings reduces this to 161465 (3.479 k). This comes at a cost of course: Generation is slightly slower, but we are still faster than what we started with and it makes room (also cache size wise) for further changes.
2014-09-27drop stored StringItems in favor of in-memory mappingsDavid Kalnischkies
Strings like Section names or architectures are needed vary often. Instead of writing them each time we need them, we deploy sharing for these special strings. Until now, this was done with a linked list of strings in which we would search, which was stored in the cache. It turns out we can do this just as well in memory as well with a bunch of std::map's. In memory means here that it isn't available anymore if we have a partly invalid cache, but that isn't much of a problem in practice as the status file is compared to the other files we parse very small and includes mostly duplicates, so the space we would gain by storing is more or less equal to the size of the stored linked list…
2014-09-27count strings more accurately for statsDavid Kalnischkies
So far, only the few strings stored in stringitems were counted, but many more strings are directly inserted into the cache. We account for this now by identifying all these different strings and measure their length. We are still not at the correct size of the cache in 'stats' this way, but we are now again a bit closer. Git-Dch: Ignore
2014-09-27packages in the cache are sorted by name so noise-freeDavid Kalnischkies
Commit aa0fe657e46b87cc692895a36df12e8b74bb27bb sorts the package names in the hashtable. We make use of this already in these functions, but as a minor sideeffect it also means that we don't have 'noise' anymore between packages belonging to the same group. We therefore don't need to check for a matching name in Grp.FindPkg anymore. Git-Dch: Ignore
2014-09-27search for pkg names in the cache case-sensitiveDavid Kalnischkies
Package names have to be lowercase (debian-policy §5.6.1) and in as lowlevel as these method are it would be quiet strange to treat an invalid package "suddently" as a valid one which other tools might or might not accept. If case-insensitivity is really needed the frontend should ensure this rather than these methods waste cpu cycles by default. Git-Dch: Ignore
2014-09-27deprecate Pkg->Name in favor of Grp->NameDavid Kalnischkies
They both store the same information, so this field just takes up space in the Package struct for no good reason. We mark it "just" as deprecated instead of instantly removing it though as it isn't misleading like Section was and is potentially used in the wild more often.
2014-09-26Disable Mth.DropPrivsOrDie() in copy.cc for nowMichael Vogt
Dch-Ignore: true
2014-09-25Remove check for "Translation-" from pkgAcqIndex::Custom600Headers()Michael Vogt
This unneeded because pkgAcqIndexTrans has its own Custom600Headers() method.
2014-09-25Revert making pkgAcquire::Item::DescURI() "const"Michael Vogt
Revert because its a API change and the gain does not justify the extra work to make the required changes in the consumers of this interface at this point.
2014-09-25Use /var/empty as the homedir for _aptMichael Vogt
Thanks to Axel Beckert
2014-09-24releasing package apt version 1.1~exp3Michael Vogt
2014-09-24DropPrivs: Document what it doesJulian Andres Klode
Git-Dch: ignore
2014-09-24DropPrivs: Use APT::Sandbox::User instead of Apt::User::NobodyJulian Andres Klode
Git-Dch: ignore
2014-09-24DropPrivs: Hard-fail if the user does not existJulian Andres Klode
Git-Dch: ignore
2014-09-24DropPrivs: Add some comments for the more obscure setuid/setgid functionsJulian Andres Klode
Git-Dch: ignore
2014-09-24DropPrivs: Move the re-set uid/gid thing to the end of the functionJulian Andres Klode
Git-Dch: ignore
2014-09-24methods: Fail if we cannot drop privilegesJulian Andres Klode
2014-09-24DropPrivs: Improve commentsJulian Andres Klode
Git-Dch: ignore
2014-09-24DropPrivs: Also check for saved set-user-ID and set-group-IDJulian Andres Klode
2014-09-24DropPrivs: Do not use an invalid return check for setgroups()Julian Andres Klode
setgroups() returns 0 on success Git-Dch: ignore
2014-09-24Use _apt as our unprivileged user nameJulian Andres Klode
Some people want to standardize on it, and BSDs do it too, so let's do the same. Reported-by: Paul Wise <pabs@debian.org>
2014-09-24DropPriv: Really call seteuid and not setuid, and add more checksJulian Andres Klode
The only thing we are missing is non-portable saved ids support.
2014-09-24Drop Privileges to "Debian-apt" in most acquire methodsMichael Vogt
Add a new "Debian-apt" user that owns the /var/lib/apt/lists and /var/cache/apt/archive directories. The methods http, https, ftp, gpgv, gzip switch to this user when they start. Thanks to Julian and "ioerror" and tors "switch_id()" code.
2014-09-23fix testsMichael Vogt
2014-09-23Merge branch 'debian/sid' into debian/experimentalMichael Vogt
Conflicts: apt-pkg/acquire-item.cc apt-pkg/acquire-item.h apt-pkg/cachefilter.h configure.ac debian/changelog