summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-08-10apt-private: Do not include apti18n.h in headersJulian Andres Klode
This causes build failures when turning translations off.
2016-08-10prepare-release: Switch over to CMake, set version in CMakeLists.txtJulian Andres Klode
Teach the prepare-release script about the version new locations and also set the version in CMakeLists, as that is better than reading it from the changelog: CMake would not rerun automatically otherwise if the version changed. Gbp-Dch: ignore
2016-08-10CMake: Rewrite existing Documentation support and add doxygenJulian Andres Klode
This can now build all documentation. It should also be fairly reusable for other projects, as long as they follow the same naming scheme for the po4a output files and set the PACKAGE_* variables used here. We could have done all translations in a single call to po4a like the makefile based buildsystem does. While that would have made the output slightly nicer, this solution offers a huge performance gain because it can translate the documents in parallel, which also means that the xsltproc stage does not have to wait for all translations to be done first. You might think that the add_custom_command() should list the actual output files as BYPRODUCTS. This is not true however: Because the files are not always generated, Ninja will think missing byproducts mean that the target is out of date - which is not what we want. Finally, also add the missing doxygen support. Note that the packaging script cleans up some md5 and map files created by doxygen, otherwise it is fairly boring.
2016-08-10CMake: Misc: Extract command path_join() from TranslationsJulian Andres Klode
This abstracts the joining of paths a bit better than having basically the same code twice in the Translations module. Gbp-Dch: ignore
2016-08-10CMake: Check for ptsname_r() againJulian Andres Klode
This was dropped in autotools as I found no use of the HAVE_PTSNAME_R macro. Turns out it was typoed as HAVE_PTS_NAME_R. Fix the #ifdef and add checks to CMake for it. Closes: #833674
2016-08-10CMake: Allow building without dpkgJulian Andres Klode
It's not entirely clear if that is useful, but it cannot hurt. We need to check what is missing to build on foreign systems without dpkg. Gbp-Dch: ignore
2016-08-10CMake: Bump minimum required version to 3.4.0Julian Andres Klode
The SOURCE_DIR property is used for the translation building and was introduced in cmake 3.4
2016-08-10debian: make autopkgtest run with CMake build dirJulian Andres Klode
2016-08-10CMake: Add unit testsJulian Andres Klode
Add support for our GTest based unit tests. By default, CMake will look in /usr/src/gtest for the external GTest project, but this can be overriden by defining GTEST_ROOT when invoking cmake. Gbp-Dch: ignore
2016-08-10CMake: Translations: Build .pot in po binary dir, not project oneJulian Andres Klode
This was cluttering up things all over the place. Gbp-Dch: ignore
2016-08-10CMake: Translations: Allow excluding languages from translationJulian Andres Klode
This seems to be needed for the hebrew translations. Gbp-Dch: ignore
2016-08-10CMake: Translations: Avoid rebuilding .mo if .pot did not changeJulian Andres Klode
Use the witness/byproducts approach to build the translations. A byproduct of a command is like an output, but may be older than the input. Here, we generate a normal template with headers in the normal way as a witness (and for Launchpad translations), but we also generate a .pot-tmp0 template file without a header that gets copied to a .pot-tmp byproduct only if it changed. This way, the .pot-tmp is only updated if an actual string translation changed. We also create a custom target for the .pot file that we'll depend on later in the overall target creating the mo files to ensure that the template is build before we try to build mo files. Then we make the msgmerge depend on the .pot-tmp instead of the .pot file, which means that msgmerge and msgfmt only get re-run if a string change occured. Gbp-Dch: ignore
2016-08-10CMake: Translations: Add a statistics targetJulian Andres Klode
This is really useful stuff to have. Gbp-Dch: ignore
2016-08-10CMake: Translations: Build apt-all.pot and update .po filesJulian Andres Klode
Merge all the per-domain templates into one template file using msgcomm, stripping any line numbers in the input files, and sorting the output per file. This should create reasonably stable .pot and .po files that do not change just because files move around. It should also be resilient against some line changes, as long as one translated line is not moved before/after another translated line. Gbp-Dch: ignore
2016-08-10CMake: Translations: Add support for shell scriptsJulian Andres Klode
Rework the arguments to apt_add_translation_domain so a user can specify TARGETS and SCRIPTS, the latter being Shell scripts. For each language (TARGETS being C++, SCRIPTS being Shell), a separate template is generated via xgettext. Those templates are then merged together by using msgcomm. In case there are no Shell scripts in the translation domain, msgcomm will receive /dev/null instead of a shell translation template. This also reintroduces line numbers, as msgcomm would otherwise re-order the merged files not only by filename, but also by message string. It's unclear why it does that, it could just leave strings within a file alone. In contrast to the old build system, we use xgettext for shell scripts instead of bash --dump-strings, as it's just easier to use the same tool for everything. We also create valid headers.
2016-08-10CMake: Translations: Write a .po file before writing a .mo fileJulian Andres Klode
This makes debugging things easier. Gbp-Dch: ignore
2016-08-10CMake: Translations: Pass some additional arguments to commandsJulian Andres Klode
This gets rid of the line numbers, adds the plural keyword, and makes msgfmt print statistics, so we know how well translated we are. Gbp-Dch: ignore
2016-08-10CMake: Translations: Make po templates depend on input filesJulian Andres Klode
I wondered why the template was not rebuilt after I changed a file, now I have the answer. Gbp-Dch: ignore
2016-08-10CMake: Set PACKAGE_MAIL variableJulian Andres Klode
This is needed in a lot of places. Also adjust config.h.in to use it instead of the bare email address. Gbp-Dch: ignore
2016-08-10CMake: po: Add mirror methodJulian Andres Klode
I forgot this one, sorry
2016-08-10CMake: Improve handling of vendor filesJulian Andres Klode
First of all, instead of creating the files at configure time, generate the files using normal target. This has the huge advantage that they are rebuilt if their input changes. While we are at it, also add dependencies on the vendor entity files. This also fixes the path to the vendor script, which was given relatively before, which obviously won't work when running from inside a deeper subdirectory. To speed things up, pass the --vendor option to getinfo, so we do not have to find out the current vendor in getinfo all over again. Gbp-Dch: ignore
2016-08-10CMake: Cache CURRENT_VENDOR and make it configurableJulian Andres Klode
Cache the current vendor, so we do not have to rerun getinfo when reconfiguring stuff. This also has the nice effect of making the vendor configurable, so you can manually specify it on a platform that might not have dpkg (not that building without dpkg works yet). Gbp-Dch: ignore
2016-08-10vendor/getinfo: Accept --vendor VENDOR optionJulian Andres Klode
This can be used to query a field for a specific vendor. It also speeds up things a lot if we can cache the current vendor in cmake and pass it to further getinfo invocations. Gbp-Dch: ignore
2016-08-10CMake: Use find_package() for curl instead of pkg_check_modules()Julian Andres Klode
No need to involve pkg-config when CMake has builtin support Gbp-Dch: ignore
2016-08-06releasing package apt version 1.3~pre3+cmake21.3_pre3+cmake2Julian Andres Klode
2016-08-06Build-depend on pkg-configJulian Andres Klode
2016-08-06releasing package apt version 1.3~pre3+cmake11.3_pre3+cmake1Julian Andres Klode
2016-08-06CMake: Adjust abicheck locationsJulian Andres Klode
Look in build/apt-pkg and build/apt-inst instead of build/bin. Gbp-Dch: ignore
2016-08-06CMake: debian: Switch packaging over to CMake and dh 9Julian Andres Klode
This new packaging is much easier to read, although the duplication in the install files is a bit annoying. We should probably also get rid of the movefiles for solvers, planners, and https method; but then we have to keep track of which methods exist in the apt package. Another disadvantage is that building only the documentation packages also requires building the code, as there's no way to turn off code building in the project.
2016-08-06CMake: Switch integration tests and travis overJulian Andres Klode
This early support seems a bit hacky, but it's a hard switch: The integration tests do not understand the old build system anymore afterwards. I don't really like that.
2016-08-06CMake: Add initial support for documentation buildingJulian Andres Klode
Build HTML docbook guides (untranslated) and manual pages (including translations). Also install the examples in the example subdirectory. Translation of docbook guides has not been implemented yet, but should be easy to do. The code also needs some cleanup to automatically detect the available translations.
2016-08-06CMake: Add support for building and installing .mo filesJulian Andres Klode
Introduce support for building translation domain-specific templates, merging them with the translations, and building a language-specific .mo file. The invocation of xgettext is done in the project source directory, not in the current source directory, and all paths are made relative to the project root, in order to have clean templates. This only supports the C++ source code for now, it unfortunately does not handle the shell scripts of deselect yet.
2016-08-06CMake: Add basic CMake build systemJulian Andres Klode
Introduce an initial CMake buildsystem. This build system can build a fully working apt system without translation or documentation. The FindBerkelyDB module is from kdelibs, with some small adjustements to also look in db5 directories. Initial work on this CMake build system started in 2009, and was resumed in August 2016.
2016-08-06prepare-release: Also search for libraries in CMake locationsJulian Andres Klode
With this change, the 'library' command looks for a library libX in the directories: build/bin, */X, X. This allows it to find the library when building with the upcoming CMake backend, which places the libraries in a sub directory of the build tree with the same name as the source tree. For example, if building in 'build/', the apt-pkg library will be available at 'build/apt-pkg/libapt-pkg.so.5.0'. In case there are multiple instances of a library, the newest one will be used. Gbp-Dch: ignore
2016-08-06debian/control: Use versioned provides for same-ver library depsJulian Andres Klode
This simplifies the design a bit, as we do not need to read the major ABI version number from some file / command. Gbp-Dch: ignore
2016-08-06vendor/getinfo: Teach it about sourceslist-list-formatJulian Andres Klode
This makes it easier to write a generic subsitution tool for handling substitutions in apt-key.in and sources.list.in Gbp-Dch: ignore
2016-08-06vendor/getinfo: Provide command to determine vendor to useJulian Andres Klode
Introduce the 'current' command to eventually replace the current symbolic link. The current command does roughly the same as the makefile, the code has just been cleaned up a bit to work better as a shell function. Gbp-Dch: ignore
2016-08-06doc: Fix fuzzy string regressionJulian Andres Klode
Commit b559d4846018c3adac362c6f1d0d697956586208 updated the documentation to refer to apt.systemd.daily instead of the apt cron job, introducing fuzzy strings in all the translations. Gbp-Dch: ignore
2016-08-06test: Pass -maxdepth 1 when running find in methods dirJulian Andres Klode
This fixes a test failures in the cmake branch which contains sub directories in the methods output dir.
2016-08-06configure.ac: Drop broken unused check for ptsname_r()Julian Andres Klode
AC_CHECK_FUNCS() defines HAVE_* variables, but AC_CHECK_FUNC() does not. Anyway: We do not have any code using HAVE_PTSNAME_R, so just remove it.
2016-08-06configure.ac: Re-enable pthread support for thread-local _errorJulian Andres Klode
This was disabled in 1999 by jgg due to "glibc bugs". Let's hope those are fixed now, 17 years later.
2016-08-05Merge pull request Debian/apt#18 from corburn/docJulian Andres Klode
doc: update path to periodic options script
2016-08-05doc: update path to periodic options scriptJason Travis
2016-08-04apt-private: #ifdef HAVE_STRUCT_STATFS_F_TYPE, not #ifJulian Andres Klode
While autotools defines all macros to 1 explicitly, CMake only defines them without a value. In such a case, #if fails with an error and #ifdef works. In preparation for a possible switch to CMake and to clean up the code (rest uses #ifdef), use #ifdef here
2016-08-04Release 1.3~pre31.3_pre3Julian Andres Klode
2016-08-03ExecGPGV: Pass current config state to apt-key via temp fileJulian Andres Klode
Create a temporary configuration file with a dump of our configuration and pass that to apt-key. LP: #1607283
2016-08-03ExecGPGV: Fork in all casesJulian Andres Klode
2016-08-03ExecGPGV: Rework file removal on exit()Julian Andres Klode
Create a local exiter object which cleans up files on exit.
2016-08-03gpgv: Unlink the correct temp file in error caseJulian Andres Klode
Previously, when data could be created and sig not, we would unlink sig, not data (and vice versa).
2016-07-31apt-key: ignore any error produced by gpgconf --killDavid Kalnischkies
gpgconf wasn't always equipped with a --kill option as highlighted by our testcases failing on Travis and co as these use a much older version of gpg2. As this is just for cleaning up slightly faster we ignore any error a call might produce and carry on. Use a recent enough gpg2 version if you need the immediate killing… Gbp-Dch: Ignore Reported-By: Travis CI