summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-03-13Merge branch 'debian/sid' of ssh://git.debian.org/git/apt/apt into debian/sidMichael Vogt
2014-03-13use the pretty fullname of a pkg as download desciptionDavid Kalnischkies
Otherwise the "WARNING: The following packages cannot be authenticated!" messages does not include the architecture of the package, so it would be slightly misinformative.
2014-03-13refactor FileFd to hide some #ifdefsDavid Kalnischkies
They tend to be ugly to look at, so hide them. Git-Dch: Ignore
2014-03-13use liblzma-dev to provide xz/lzma supportDavid Kalnischkies
We have xz/lzma support for a while, but only via an external binary provided by xz-utils. Now that the Debian archive provides xz by default and dpkg pre-depends on the library provided by liblzma-dev we can switch now to use this library as well to avoid requiring an external binary. For now the binary is in a prio:required package, but this might change in the future. API wise it is quiet similar to bz2 code expect that it doesn't provide file I/O methods, so we piece this together on our own.
2014-03-13add a config option to switch uncompress methods to compressDavid Kalnischkies
Not very useful in the normal operation of work, but handy for tests. Git-Dch: Ignore
2014-03-13ensure that gz compression test is run with gzDavid Kalnischkies
The framework can be configured to use different compression algorithms to test different ones, but a testcase testing for gz support should always be run with gz, regardless of what compressions are configured otherwise. Git-Dch: Ignore
2014-03-13factor out getting list of architectures from comma listDavid Kalnischkies
Beside fixing this minor code duplication it also resolves the problem of messing up vim syntax-highlighting. Git-Dch: Ignore
2014-03-13refactor setup of file opening via zlib/bz2 libDavid Kalnischkies
Git-Dch: Ignore
2014-03-13move fd duplication closer to the gz/bz2 open callsDavid Kalnischkies
Git-Dch: Ignore
2014-03-13abstract version hash comparison a bitDavid Kalnischkies
In #737085 we see that apt can be confused if informations about versions only differ slightly. This commit adds a way of at least adding a few more data points with the next abi break to help a bit with it. Git-Dch: Ignore
2014-03-13factor out parsing of MultiArch flagDavid Kalnischkies
Git-Dch: Ignore
2014-03-13correct LD_LIBRARY_PATH and config loading for apt-helperDavid Kalnischkies
Mostly ensures that we use the build methods and not the system provided methods in the tests (if we don't want it that way). Git-Dch: Ignore
2014-03-13ensure that a dot is a dot in the hookDavid Kalnischkies
As we deal with regex matchers here the dots are treated as wildcards if we don't take care of escaping them. Not very likely that this could be a real-world problem, but just to be sure.
2014-03-13add ".*-{kernel,modules}-$KERVER" matcher for hookDavid Kalnischkies
Pre-build kernel modules (like those build with module-assistent) are commonly named in this way and it should be ungeneric enough to be added by default for everyone.
2014-03-13support kfreebsd and hurd in the kernel hookDavid Kalnischkies
kfreebsd as well as hurd kernel packages call the postinst script as well so we just need to enable the correct parsing for installed packages and disable the "protect every version" hammer for them.
2014-03-13use a configurable list of versioned kernel packagesDavid Kalnischkies
With APT::VersionedKernelPackages users have the option of adding packages like pre-build out-of-tree modules to the list of automatically protected from being autoremoved.
2014-03-13cmdline parsing: apt-config is not apt-cdromDavid Kalnischkies
2014-03-13improve debug output in case downloadfile failsDavid Kalnischkies
Git-Dch: Ignore
2014-03-13msgstr with elipses need three dotsDavid Kalnischkies
fixes some messages and their translation so that all of them have three dots for messages with an elipse. Many translations already had this.
2014-03-13fix polish --install-suggests text in apt-get manpageWojciech Górski
Description of the --install-suggests option is wrong in the polish apt-get man page. The actual meaning of this option is the opposite to what is written in the manual. Closes: 741056
2014-03-13support very long mtab entries in mountpoint discoveryDavid Kalnischkies
Old code limited lines to 250 characters which is probably enough for everybody, but who knows… It also takes care of device nodes which start with the same prefix.
2014-03-13enable mount support for apt-cdrom in the testsDavid Kalnischkies
Git-Dch: Ignore
2014-03-13remove code duplication for Add & Ident in apt-cdromDavid Kalnischkies
The preparation code to deal with auto-detection and co is the same for both methods, so not sharing them would be bad. Deals also with the prevention of side effects triggered by the auto-detection like disabling mounting for the fallback. Git-Dch: Ignore
2014-03-13apt-cdrom ident shouldn't be interactiveDavid Kalnischkies
Commit 62dcbf84 changed the code of ident to look more like the code for add on my suggestion. This made ident interactive as it starts with a unmount, press enter, mount cycle. The first two are skipped now. This fixes d-i/apt-setup which is using it to get ID as well as label. Closes: 740673
2014-03-13no error for non-existing mountpoints in MountCdromDavid Kalnischkies
The mountpoint might be auto-generated by the mount command so pushing an error on the stack will confuse the following code and let it believe an unrecoverable error occured while potentially everything is okay. Same goes for umount as a non-existing mountpoint is by definition not mounted.
2014-03-13if mountpoint has a ".disk" directory it is mountedDavid Kalnischkies
Checking that parent-directory of mountpoint and mountpoint are on different devices is fine most of the time, but is too restrictive for our testcases and there shouldn't be anything wrong with 'normal' users copying disk-contents around either if they want to. We check for the existance of the ".disk/" directory now as this will not be present if the disk isn't 'mounted'. Disks doesn't need to have such a directory through, so for those we fall back to the old way of detecting mounted or not mounted.
2014-03-13simplify apt-cdrom testcodeDavid Kalnischkies
Git-Dch: Ignore
2014-03-13do not configure already unpacked packages needlesslyDavid Kalnischkies
The unpack of a M-A:same package will force the unpack of all its siblings directly to prevent that they could be separated by later immediate actions. In commit 634985f8 a call to SmartConfigure was introduced to configure these packages at the time the installation order encounters them. Usually, the unpack order is already okay, so that this 'earlier' unpack was not needed and if it wouldn't have been done, the package would now only be unpacked, but by configuring the package now we impose new requirements which must be satisfied. The code is clever enough to handle this most of the time (it worked for 2 years!), but it isn't needed and in very coupled cases this can fail. Removing this call again removes this extra burden and so simplifies the ordering as can be seen in the modified tests. Famous last words, but I don't see a reason for this extra burden to exist hence the remove. Closes: 740843
2014-03-13enable various compiler warningsDavid Kalnischkies
Now that the last few commits resolved the issues we can finally enable a bunch of compiler warnings by default. Git-Dch: ignore
2014-03-13use SPtrArray handling instead of explicit delete[]David Kalnischkies
The warning message from gcc doesn't make that much sense in my reading as there is no loop which could overflow here, but it is better to use our SPtrArray wrapping anyway which fixes the warning as well. warning: cannot optimize loop, the loop counter may overflow [-Wunsafe-loop-optimizations] delete[] Dsc; Git-Dch: Ignore Reported-By: gcc -Wunsafe-loop-optimizations
2014-03-13follow method attribute suggestions by gccDavid Kalnischkies
Git-Dch: Ignore Reported-By: gcc -Wsuggest-attribute={pure,const,noreturn}
2014-03-13cleanup headers and especially #includes everywhereDavid Kalnischkies
Beside being a bit cleaner it hopefully also resolves oddball problems I have with high levels of parallel jobs. Git-Dch: Ignore Reported-By: iwyu (include-what-you-use)
2014-03-13move defines for version to macros.hDavid Kalnischkies
also adds namespaced attributes for good usage Git-Dch: Ignore
2014-03-13warning: unused parameter ‘foo’ [-Wunused-parameter]David Kalnischkies
Reported-By: gcc -Wunused-parameter Git-Dch: Ignore
2014-03-13warning: type qualifiers ignored on function return type [-Wignored-qualifiers]David Kalnischkies
Reported-By: gcc -Wignored-qualifiers Git-Dch: Ignore
2014-03-13warning: cannot optimize loop, the loop counter may overflow ↵David Kalnischkies
[-Wunsafe-loop-optimizations] Git-Dch: Ignore Reported-By: gcc -Wunsafe-loop-optimizations
2014-03-13warning: no previous declaration for foobar() [-Wmissing-declarations]David Kalnischkies
Git-Dch: Ignore Reported-By: gcc -Wmissing-declarations
2014-03-13warning: useless cast to type A [-Wuseless-cast]David Kalnischkies
Git-Dch: Ignore Reported-By: gcc -Wuseless-cast
2014-03-13warning: cast from type A to type B casts away qualifiers [-Wcast-qual]David Kalnischkies
Git-Dch: Ignore Reported-By: gcc -Wcast-qual
2014-03-13StartPos is always positive for http/httpsDavid Kalnischkies
server.cc: In member function ‘bool ServerState::HeaderLine(std::string)’: server.cc:198:72: warning: format ‘%llu’ expects argument of type ‘long long unsigned int*’, but argument 3 has type ‘long long int*’ [-Wformat=] else if (sscanf(Val.c_str(),"bytes %llu-%*u/%llu",&StartPos,&Size) != 2) Git-Dch: Ignore Reported-By: gcc -Wpedantic
2014-03-13warning: extra ‘;’ [-Wpedantic]David Kalnischkies
Git-Dch: Ignore Reported-By: gcc -Wpedantic
2014-03-13warning: non-ISO-standard escape sequence, '\e' [enabled by default]David Kalnischkies
Git-Dch: Ignore Reported-By: gcc -Wpedantic
2014-03-13fix -Wformat= warnings about size_t != %lu on e.g. armelDavid Kalnischkies
Git-Dch: Ignore Reported-By: gcc
2014-03-13fix -Wmissing-field-initializers warningsDavid Kalnischkies
Reported-By: gcc Git-Dch: Ignore
2014-03-13make doxygen more quiet, fix issues and disable latexDavid Kalnischkies
Git-Dch: Ignore
2014-03-13unset LANGUAGE in the testing framework directlyDavid Kalnischkies
Git-Dch: Ignore
2014-03-13support DEB_BUILD_PROFILES and -P for build profilesDavid Kalnischkies
Inspired by the rest of the patch in 661537, but abstract the parsing of various ways of setting the build profiles more so it can potentially be reused and all apt parts have the same behaviour. Especially config options, cmdline options and environment will not be combined as proposed as this isn't APTs usual behaviour and dpkg doesn't do it either, so one overrides the other as it normally does.
2014-03-13implement BuildProfileSpec support as dpkg has in 1.17.2Johannes Schauer
Build-dependencies are now able to include a <profile.foo …> specification limiting usage similar to already supported [arch …]. More details: https://wiki.debian.org/BuildProfileSpec Closes: 661537
2014-03-13add default and override handling for Cnf::FindVectorDavid Kalnischkies
Automatically handle the override of list options via its parent value which can even be a comma-separated list of values. It also adds an easy way of providing a default for the list.
2014-03-13autogenerate makefile for vendor systemDavid Kalnischkies
It can be useful to have a whole makefile available for vendor setup, but by providing a basic one we can deal with the simple cases more easily (and changes to the system are presumably easier).