summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-12-31allow warning generation for non-whitelisted optionsDavid Kalnischkies
The idea is simple: Each¹ Find*( call starts with a call check if the given option (with the requested type) exists in the whitelist. The whitelist is specified via our configure-index file so that we have a better chance at keeping it current. the whitelist is loaded via a special (undocumented for now) configuration stanza and if none is loaded the empty whitelist will make it so that no warnings are shown. Much needs to be done still, but that is as good a time as any to take a snapshot of the current state and release it into the wild given that it found some bugs already and has no practical effect on users. ¹ not all in this iteration, but many
2016-12-31fix minimum pkgs option for dpkg --recursive usageDavid Kalnischkies
Interpreting a boolean as an int works just fine – it just hasn't the intended result – it isn't a serious problem through as the disabling of the usage of this dpkg calling style is just an "optimization"
2016-12-31apt-key: ignore gpg1 already imported secret key import failureDavid Kalnischkies
On Travis and co the default gpg implementation is gpg1 which for some reason fails if a secret key which was already imported is imported again. We would prefer it to be a NOP like gpg2 handles it so we crudely check the error message. apt-key usually doesn't deal with secret keys – it only learned to do it for manual testing and the integration framework usage, so no public interface is effected. Triggered-By: 4ce2f35248123ff2366c8c365ad6a94945578d66 Gbp-Dch: Ignore
2016-12-31use FindB instead of FindI for Debug::pkgAutoRemoveDavid Kalnischkies
Again no practical difference, but for consistency a boolean option should really be accessed via a boolean method rather than an int especially if you happen to try setting the option to "true" … Gbp-Dch: Ignore
2016-12-31avoid producing invalid options if repo has no hostDavid Kalnischkies
This can happen e.g. for file: repositories. There is no inherent problem with setting such values internally, but its bad style, forbidden in the manpage and could be annoying in the future. Gbp-Dch: Ignore
2016-12-31gets file location via FindFile instead of manual mergeDavid Kalnischkies
Unlikely to have any practical effect, but its more consistent to use the right methods instead of performing it slightly incorrect by hand. Gbp-Dch: Ignore
2016-12-31rename ServerMethod to BaseHttpMethodDavid Kalnischkies
This 'method' is the abstract base for http and https and should as such be called out like this rather using an easily confused name. Gbp-Dch: Ignore
2016-12-31separating state variables regarding server/requestDavid Kalnischkies
Having a Reset(bool) method to partially reset certain variables like the download size always were strange, so this commit splits the ServerState into an additional RequestState living on the stack for as long as we deal with this request causing an automatic "reset". There is much to do still to make this code look better, but this is a good first step which compiles cleanly and passes all tests, so keeping it as history might be beneficial and due to avoiding explicit memory allocations it ends up fixing a small memory leak in https, too. Closes: #440057
2016-12-31expand -f to --fix-broken in error messagesDavid Kalnischkies
Users end up believing that this is a --force mode as -f is common for that, but apt doesn't have such a mode and --fix-broken is really not about forcing something but actually trying to fix the breakage which tends to be the result of a user forcing something on its system via low-level forced dpkg calls. Example: The "common" pattern of "dpkg -i ./foo.deb; apt install -f" is nowadays far better dealt with via "apt install ./foo.deb". And while at it the two places handing out this suggestion are changed to use the same strings to avoid needless translation work in the future and the suggestion uses 'apt' instead of 'apt-get' as this will be run interactively by a user, so its a good opportunity to showcase what we can do and will allow us to be more helpful to the user. Closes: #709092 Thanks: Kristian Glass for initial patch!
2016-12-31allow default build-essentials to be overriddenDavid Kalnischkies
The config list APT::Build-Essential gets a similar treatment to other lists now by having the value of the option itself be an override for the list allowing to disable build-essentials entirely as well as adding/overriding as usual by now in other lists. Reported-By: Johannes 'josch' Schauer on IRC
2016-12-31add --indep-only for build-dep commandDavid Kalnischkies
The implementation is quite different compared to --arch-only due to ABI reasons but functionality wise they are similar and usually both available for symmetry at least. Closes: #845775
2016-12-31ensure generation of valid EDSP error stanzasDavid Kalnischkies
The crude way of preparing a message to be a multiline value failed at generation valid deb822 in case the error message ended with a new line like the resolving errors from apt do. apt itself can parse these, but other tools like grep-dctrl choke on it, so be nice and print valid. Reported-By: Johannes 'josch' Schauer on IRC
2016-12-31Dutch manpages translation updateFrans Spiesschaert
Closes: #849235
2016-12-31do not generate Maximum-Size if we already have that fieldDavid Kalnischkies
Any respective parser will do the right thing and grab the last value, but its better for style to generate that field only once. Gbp-Dch: Ignore
2016-12-31warn if clearsigned file has ignored content partsDavid Kalnischkies
Clearsigned files like InRelease, .dsc, .changes and co can potentially include unsigned or additional messages blocks ignored by gpg in verification, but a potential source of trouble in our own parsing attempts – and an unneeded risk as the usecases for the clearsigned files we deal with do not reasonably include unsigned parts (like emails or some such). This commit changes the silent ignoring to warnings for now to get an impression on how widespread unintended unsigned parts are, but eventually we want to turn these into hard errors.
2016-12-21tests: cache the apt-key homedir used for Release signingDavid Kalnischkies
Importing a new secret key into gpg(2) can be increadibly slow which prolongs the test runs significantly – by caching the homedir we gain a significant speedbonus as reimporting already present keys seems like a far less costly operation. Git-Dch: Ignore
2016-12-16Catalan program translation updateOriol Debian
Closes: #846514
2016-12-16default to --no-check for dpkg-source callDavid Kalnischkies
In bug #757534 the opposite direction was initially requested, but what we did end up with was having a possibility to configure the options passed to dpkg. The reasoning given their and in #724744 is specific why apt doesn't need the checks to be performed by dpkg. In fact, what these two reports show is that if those checks are run people end up being confused about the requirement of them being run, so given the best case those checks can do is do nothing (visibly) while the worst cases are warnings and errors which are neither we are from a security point better of with disabling them – as (as mentioned in the bugreports) false positives for issues are really really bad in a security context. Closes: 724744
2016-12-16remove needless fork() in apt-get sourceDavid Kalnischkies
We are calling system() in this code paths, so all we do here is having a single child performing the action while the parent waits for it to finish… with the added strangeness of not having our usual error message collection and giving up after first failure even if told to act on multiple packages.
2016-12-16let {dsc,tar,diff}-only implicitly enable download-onlyDavid Kalnischkies
That was the case already for tar-only and diff-only, but in a more confusing way and without a message while dsc "worked" before resulting in a dpkg-source error shortly after as tar/diff files aren't available…
2016-12-16reword "Can't drop priv" warning messageDavid Kalnischkies
Note: This is a warning about disabling a security feature. It is supposed to be scary as we are disabling a security feature and we can't just be silent about it! Downloads really shouldn't happen any longer as root to decrease the attack surface – but if a warning causes that much uproar, consider what an error would do… The old WARNING message: | W: Can't drop privileges for downloading as file 'foobar' couldn't be | accessed by user '_apt'. - pkgAcquire::Run (13: Permission denied) is frequently (incorrectly) considered to be an error message indicating that the download didn't happen which isn't the case, it was performed, but without all the security features enabled we could have used if run from some other place… The word "unsandboxed" is chosen as the term 'sandbox(ed)' is a common encounter in feature lists/changelogs and more people are hopefully able to make the connection to 'security' than it is the case for 'privilege dropping' which is more correct, but far less known. Closes: #813786 LP: #1522675
2016-12-13Merge pull request Debian/apt#31 from paperlessreceipts/https-forceipvJulian Andres Klode
Honour Acquire::ForceIPv4/6 in the https transport
2016-12-08Release 1.4~beta2 security update1.4_beta2Julian Andres Klode
2016-12-08releasing package apt version 1.4~beta2Julian Andres Klode
2016-12-08gpgv: Flush the files before checking for errorsJulian Andres Klode
This is a follow up to the previous issue where we did not check if getline() returned -1 due to an end of file or due to an error like memory allocation, treating both as end of file. Here we ensure that we also handle buffered writes correctly by flushing the files before checking for any errors in our error stack. Buffered writes themselves were introduced in 1.1.9, but the function was never called with a buffered file from inside apt until commit 46c4043d741cb2c1d54e7f5bfaa234f1b7580f6c which was first released with apt 1.2.10. The function is public, though, so fixing this is a good idea anyway. Affected: >= 1.1.9
2016-12-08SECURITY UPDATE: gpgv: Check for errors when splitting files (CVE-2016-1252)Julian Andres Klode
This fixes a security issue where signatures of the InRelease files could be circumvented in a man-in-the-middle attack, giving attackers the ability to serve any packages they want to a system, in turn giving them root access. It turns out that getline() may not only return EINVAL as stated in the documentation - it might also return in case of an error when allocating memory. This fix not only adds a check that reading worked correctly, it also implicitly checks that all writes worked by reporting any other error that occurred inside the loop and was logged by apt. Affected: >= 0.9.8 Reported-By: Jann Horn <jannh@google.com> Thanks: Jann Horn, Google Project Zero for reporting the issue LP: #1647467
2016-12-08Honour Acquire::ForceIPv4/6 in the https transportLukasz Kawczynski
2016-11-30bash-completion: Only complete understood file paths for installJohn R. Lenton
Previouosly apt's bash completion was such that, given $ mkdir xyzzz $ touch xyzzy.deb xyzzx.two.deb you'd get $ apt install xyzz<tab> xyzzx.two.deb xyzzz/ $ apt install /tmp/foo/xyzz<tab> xyzzx.two.deb xyzzz/ this is inconsistent (xyzzx.two.deb is listed but not xyzzy.deb), but worse than that it offered things that apt would not actually recognise as candidates for install: $ sudo apt install xyzzx.two.deb Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package xyzzx.two.deb E: Couldn't find any package by glob 'xyzzx.two.deb' E: Couldn't find any package by regex 'xyzzx.two.deb' With this small (trival, really) change, apt's bash completion will only offer things apt understands, and won't recquire an aditional period in the filename to offer it: $ apt install xyzz<tab>^C $ # (no completions!) $ apt install ./xyzz<tab> xyzzx.two.deb xyzzy.deb xyzzz/ $ apt install /tmp/foo/xyzz xyzzx.two.deb xyzzy.deb xyzzz/ fixes #28 LP: #1645815
2016-11-25Release 1.4~beta11.4_beta1Julian Andres Klode
2016-11-25Add apt-pkg/tagfile-keys.cc to the gitignore fileJulian Andres Klode
This is output of triehash. Gbp-Dch: ignore
2016-11-25gpgv: Untrust SHA1, RIPE-MD/160, but allow downgrading to weakJulian Andres Klode
Change the trust level check to allow downgrading an Untrusted option to weak (APT::Hashes::SHA1::Weak "yes";), so it prints a warning instead of an error; and change the default values for SHA1 and RIPE-MD/160 from Weak to Untrusted.
2016-11-25show output as documented for APT::Periodic::Verbose 2Paul Wise
The documentation of APT::Periodic::Verbose doesn't match the code, specifically level 2 should apply some things differently to level 1 but does not because it uses `-le 2` instead of `-lt 2` or `-le 1`. Closes: 845599
2016-11-25optional write aptwebserver log to client specific filesDavid Kalnischkies
The test test-handle-redirect-as-used-mirror-change serves multiple clients at the same time, so the order of the output is undefined and once in a while the two clients will intermix their lines causing the grep we perform on it later to fail making our tests fail. Solved by introducing client-specific logfiles which we all grep and sort the result to have the results more stable. Git-Dch: Ignore
2016-11-25follow the googletest merge in build-dependsDavid Kalnischkies
2016-11-25get pdiff files from the same mirror as the indexDavid Kalnischkies
In ad9416611ab83f7799f2dcb4bf7f3ef30e9fe6f8 we fall back to asking the original mirror (e.g. a redirector) if we do not get the expected result. This works for the indexes, but patches are a different beast and much simpler. Adding this fallback code here seems like overkill as they are usually right along their Index file, so actually forward the relevant settings to the patch items which fixes pdiff support combined with a redirector and partial mirrors as in such a situation the pdiff patches would be 404 and the complete index would be downloaded.
2016-11-25document which keyring formats are supported by apt-keyDavid Kalnischkies
* the good old 'simple' keyring format * the ascii armored variant since 1.4 Not supported is the (new in gpg 2.1) keybox format. Closes: 844724
2016-11-25add apt-key support for armored GPG key files (*.asc)David Kalnischkies
Having binary files in /etc is kinda annoying – not that the armored files are much better – but it is hard to keep tabs on which format the file has ("simple" or "keybox") and different gnupg versions have different default binary formats which can be confusing for users to work with (beside that it is binary). Adding support for this now will enable us in some distant future to move to armored later on, much like we added trusted.gpg.d years before the world picked it up.
2016-11-24report apt-key errors via status-fd messagesDavid Kalnischkies
We report warnings from apt-key this way already since 29c590951f812d9e9c4f17706e34f2c3315fb1f6, so reporting errors seems like a good addition. Most of those errors aren't really from apt-key through, but from the code setting up and actually calling it which used to just print to stderr which might or might not intermix them with (other) progress lines in update calls. Having them as proper error messages in the system means that the errors are actually collected later on for the list instead of ending up with our relatively generic but in those cases bogus hint regarding "is gpgv installed?". The effective difference is minimal as the errors apply mostly to systems which have far worse problems than a not as nice looking error message, which makes this pretty hard to test – but at least now the hint that your system is broken can be read in proper order (= there aren't many valid cases in which the permissions of /tmp are messed up…). LP: #1522988
2016-11-24skip unconfigure for unconfigured to-be removed pkgsDavid Kalnischkies
2016-11-24do not configure unconfigured to be removed packagesDavid Kalnischkies
We try to configure all packages at the end which need to be configured, but that also applies to packages which weren't completely installed (e.g. maintainerscript failed) we end up removing in this interaction instead. APT doesn't perform this explicit configure in the end as it is using "dpkg --configure --pending", but it does confuse the progress report and potentially also hook scripts. Regression-Of: 9ffbac99e52c91182ed8ff8678a994626b194e69
2016-11-24don't perform implicit crossgrades involving M-A:sameDavid Kalnischkies
dpkg stumbles over these (#844300) and we haven't dropped 'easier' removes to be implicit and to be scheduled by dpkg by default so far so we shouldn't push the decision in such cases to dpkg either.
2016-11-24improve arch-unqualified dpkg-progress parsingDavid Kalnischkies
Our old idea was to look for the first package which would be "touched" and take this as the package dpkg is talking about, but that is incorrect in complicated situations like a package upgraded to/from multiple M-A:same siblings installed. As we us the progress report to decide what is still needed we have to be reasonabily right about the package dpkg is talking about, so we jump to quite a few loops to get it.
2016-11-23correct cross & disappear progress detectionDavid Kalnischkies
Given that we use the progress information to skip over actions dpkg has already done like not purging a package which was already removed and had no config files or not acting on disappeared packages and such it is important that apt and dpkg agree on which states the package has to pass through. To ensure that we keep tabs on this in the future a warning is added at the end if apt hasn't seen all the action it was supposed to see. I can't wait for the first bugreporters to wonder about this…
2016-11-23react to trig-pend only if we have nothing else to doDavid Kalnischkies
If a package is triggered dpkg frequently issues two messages about it causing us to make a note about it both times which messes up our planned dpkg actions view. Adding these actions if we have nothing else planned fixes this and should still be correct as those planned actions will deal with the triggering just fine and we avoid strange problems like a package triggered before its removed…
2016-11-22Do not use MD5SumValue for Description_md5()Julian Andres Klode
Our profile says we spend about 5% of the time transforming the hex digits into the binary format used by HashsumValue, all for comparing them against the other strings. That makes no sense at all. According to callgrind, this reduces the overall instruction count from 5,3 billion to 5 billion in my example, which roughly matches the 5%.
2016-11-22debListParser: Micro-optimize AvailableDescriptionLanguages()Julian Andres Klode
Generating a string for each version we see is somewhat inefficient. The problem here is that the Description tag names are longer than 15 byte, and thus require an allocation on the heap, which we should avoid. It seems reasonable that 20 characters works for all languages codes used for archive descriptions, but if not, there's a warning, so we'll catch that. This should improve performance by about 2%.
2016-11-22Compare size before data when ordering cache bucket entriesJulian Andres Klode
This has the effect of significantly reducing actual string comparisons, and should improve the performance of FindGrp a bit, although it's hardly measureable (callgrind says it uses 10% instructions less now).
2016-11-22Optimize VersionHash() to not need temporary copy of inputJulian Andres Klode
Stop copying stuff, and just parse the bytes one by-one to the newly created AddCRC16Byte. This improves the instruction count for an update run from 720,850,121 to 455,801,749 according to callgrind.
2016-11-22Introduce tolower_ascii_unsafe() and use it for hashingJulian Andres Klode
This one has some obvious collisions for non-alphabetical characters, like some control characters also hashing to numbers, but we don't really have those, and these are hash functions which are not collision free to begin with.
2016-11-22Bump the cache major version for non-backportable changesJulian Andres Klode
We already have two stable series with major version 10, and the next commits will introduce non-backportable performance changes that affect the cache algorithms, so we need to bump the major version now to prevent future problems.