| Age | Commit message (Collapse) | Author |
|---|
|
Create a local exiter object which cleans up files on exit.
|
|
Previously, when data could be created and sig not, we would unlink
sig, not data (and vice versa).
|
|
gpgconf wasn't always equipped with a --kill option as highlighted by
our testcases failing on Travis and co as these use a much older version
of gpg2. As this is just for cleaning up slightly faster we ignore any
error a call might produce and carry on. Use a recent enough gpg2
version if you need the immediate killing…
Gbp-Dch: Ignore
Reported-By: Travis CI
|
|
apt-key has (usually) no secret key material so it doesn't really need
the agent at all, but newer gpgs insist on starting it anyhow. The
agents die off rather quickly after the underlying home-directory is
cleaned up, but that is still not fast enough for tools like sbuild
which want to unmount but can't as the agent is still hanging onto a
non-existent homedir.
Reported-By: Johannes 'josch' Schauer on IRC
|
|
Followup of b58e2c7c56b1416a343e81f9f80cb1f02c128e25.
Still a regression of sorts of 8b79c94af7f7cf2e5e5342294bc6e5a908cacabf.
Closes: 832044
|
|
If a solver/planner exits before apt is done writing we will generate
write errors. Solvers like 'dump' can be pretty quick in failing but
produce a valid EDSP error report apt should read, parse and display
instead of just discarding even through we had write errors.
|
|
There is no point in trying to perform Write/Read on a FileFd which
already failed as they aren't going to work as expected, so we should
make sure that they fail early on and hard.
|
|
Reported-By: cppcheck
Gbp-Dch: Ignore
|
|
Simulations are frequently run by unprivileged users which naturally
don't have the permissions to write to the default location for the eipp
file. Either way is bad as running in simulation mode doesn't mean we
don't want to run the logging (as EIPP runs the same regardless of
simulation or 'real' run), but showing the warnings is relatively
pointless in the default setup, so, in case we would produce errors and
perform a simulation we will discard the warnings and carry on.
Running apt with an external planner wouldn't have generated these
messages btw.
Closes: 832614
|
|
If another file in the transaction fails and hence dooms the transaction
we can end in a situation in which a -patched file (= rred writes the
result of the patching to it) remains in the partial/ directory.
The next apt call will perform the rred patching again and write its
result again to the -patched file, but instead of starting with an empty
file as intended it will override the content previously in the file
which has the same result if the new content happens to be longer than
the old content, but if it isn't parts of the old content remain in the
file which will pass verification as the new content written to it
matches the hashes and if the entire transaction passes the file will be
moved the lists/ directory where it might or might not trigger errors
depending on if the old content which remained forms a valid file
together with the new content.
This has no real security implications as no untrusted data is involved:
The old content consists of a base file which passed verification and a
bunch of patches which all passed multiple verifications as well, so the
old content isn't controllable by an attacker and the new one isn't
either (as the new content alone passes verification). So the best an
attacker can do is letting the user run into the same issue as in the
report.
Closes: #831762
|
|
The rewrite in 742f67eaede80d2f9b3631d8697ebd63b8f95427 is based on the
assumption that the pipeline will always be at least one item short each
time it is called, but the logs in #832113 suggest that this isn't
always the case. I fail to see how at the moment, but the old
implementation had this behavior, so restoring it can't really hurt, can
it?
|
|
Also fixes message itself to mention the correct option name as noticed
in #832113.
|
|
We read the entire input file we want to patch anyhow, so we can also
calculate the hash for that file and compare it with what he had
expected it to be.
Note that this isn't really a security improvement as a) the file we
patch is trusted & b) if the input is incorrect, the result will hardly be
matching, so this is just for failing slightly earlier with a more
relevant error message (althrough, in terms of rred its ignored and
complete download attempt instead).
|
|
The flush call is a no-op in most FileFd implementations so this isn't
as critical as it might sound as the only non-trivial implementation is
in the buffered writer, which tends not be used to buffer another
buffer…
|
|
APT doesn't know which packages will be triggered in the course of
actions, so it can't plan to see them for progress beforehand, but if it
sees that dpkg says that a package was triggered we can add additional
states. This is pretty much magic – after all it sets back the progress
– and there are cornercases in which this will result in incorrect
totals (package in partial states may or may not loose trigger states),
but the worst which can happen is that the progress is slightly
incorrect and doesn't reach 100%, but so be it. Better than being stuck
at 100% for a while as apt isn't realizing that a bunch of triggers
still need to be processed.
|
|
Hardcoding /var/crash means we can't test it properly and it isn't
really our style.
|
|
The progress reporting for a package sheduled for purging only included
the states dpkg passes through while actually purging the package – if
the package was fully installed before dpkg will pass first through all
remove states before purging it, so in the interest of consistent
reporting our progress reporting should do that, too.
|
|
Gbp-Dch: Ignore
|
|
If the sources file we want to edit doesn't exist yet GetLock will
create it with 640, which for a generic lockfile might be okay, but as
this is a sources file more relaxed permissions are in order – and
actually required as it wont be readable for unprivileged users causing
warnings/errors in apt calls.
Reported-By: J. Theede (musca) on IRC
|
|
After editing the sources it is a good idea to (re)built the caches as
they will be out-of-date and doing so helps in reporting higherlevel
errors like duplicates sources.list entries, too, instead of just
general parsing errors as before.
|
|
Closes: 832039
|
|
The tests changes the sources.list and the modification time of this
file is considered while figuring out if the cache can be good. Usually
this isn't an issue, but in that case we have the cache generation
produce warnings which appear twice in this case.
Gbp-Dch: Ignore
|
|
The existing cleanup was happening only for packages which had a status
change (install -> uninstalled) which is the most frequent but no the
only case – you can e.g. set autobits explicitly with apt-mark.
This would leave stanzas in the states file declaring a package to be
manually installed – which is the default value for a package not listed
at all, so we can just as well drop it from the file.
|
|
Otherwise calls like "apt -q install" end up calling "aptautotest_apt_q"
instead of "aptautotest_apt_install"
Gbp-Dch: Ignore
|
|
We support installing ./foo.deb (and ./foo.dsc for source) for a while
now, but it can be a bit clunky to work with those directly if you e.g.
build packages locally in a 'central' build-area.
The changes files also include hashsums and can be signed, so this can
also be considered an enhancement in terms of security as a user "just"
has to verify the signature on the changes file then rather than
checking all deb files individually in these manual installation
procedures.
|
|
If a user explicitly requests the download of arch:all apt shouldn't get
in the way and perform its detection dance if arch:all packages are
(also) in arch:any files or not.
This e.g. allows setting arch=all on a source with such a field (or one
which doesn't support all at all, but has the arch:all files like Debian
itself ATM) to get only the arch:all packages from there instead of
behaving like a no-op.
Reported-By: Helmut Grohne on IRC
|
|
Moving code around into some more dedicated methods, no effective code
change itself.
Gbp-Dch: Ignore
|
|
Theoretically it should be enough to change the Dir setting and have apt
pick the dpkg/status file from that. Also, it should be consistently
effected by RootDir. Both wasn't really the case through, so a user had
to explicitly set it too (or ignore it and have or not have expected
sideeffects caused by it).
This commit tries to guess better the location of the dpkg/status file
by setting dir::state::status to a naive "../dpkg/status", just that
this setting would be interpreted as relative to the CWD and not
relative to the dir::state directory. Also, the status file isn't really
relative to the state files apt has in /var/lib/apt/ as evident if we
consider that apt/ could be a symlink to someplace else and "../dpkg"
not effected by it, so what we do here is an explicit replace on apt/
– similar to how we create directories if it ends in apt/ – with dpkg/.
As this is a change it has the potential to cause regressions in so far
as the dpkg/status file of the "host" system is no longer used if you
set a "chroot" system via the Dir setting – but that tends to be
intended and causes people to painfully figure out that they had to set
this explicitly before, so that it now works more in terms of how the
other Dir settings work (aka "as expected"). If using the host status
file is really intended it is in fact easier to set this explicitely
compared to setting the new "magic" location explicitely.
|
|
Very unlikely, but if the parent is /dev/null, the child empty and the
grandchild a value we returned /dev/null/value which doesn't exist, so
hardly a problem, but for best operability we should be consistent in
our work and return /dev/null always.
|
|
Most tests are either multiarch, do not care for the specific
architecture or do not interact with dpkg, so really effect by this is
only test-external-installation-planner-protocol, but its a general
issue that while APT can be told to treat any architecture as native
dpkg has the native architecture hardcoded so if we run tests we must
make sure that dpkg knows about the architecture we will treat as
"native" in apt as otherwise dpkg will refuse to install packages from
such an architecture.
This reverts f883d2c3675eae2700e4cd1532c1a236cae69a4e as it complicates
the test slightly for no practical gain after the generic fix.
|
|
Hardcoding amd64 broke the tests.
|
|
Yes, we might still add new features to 1.3 or break some more
stuff. Stay tuned!
|
|
The setup didn't prepare the directories as expected by newer version of
tthe external tests in an autopkgtests environment.
|
|
Added in dpkg in commit 90324cfa942ba23d5d44b28b1087fbd510340502.
|
|
Escape "+" in kernel package names when generating APT::NeverAutoRemove
list so it is not treated as a regular expression meta-character.
[Changed by David Kalnischkies: let test actually test the change]
Closes: #830159
|
|
|
|
Now post-build script should no longer complain...
Gbp-Dch: ignore
|
|
Instead of only trying the first host we get via SRV, we try them all as
we are supposed to and if that isn't working we try to connect to the
host itself as if we hadn't seen any SRV records. This was already the
intend of the old code, but it failed to hide earlier problems for the
next call, which would unconditionally fail then resulting in an all
around failure to connect. With proper stacking we can also keep the
error messages of each call around (and in the order tried) so if the
entire connection fails we can report all the things we have tried while
we discard the entire stack if something works out in the end.
|
|
If we don't give a specific error to report up it is likely that all
error currently in the error stack are equally important, so reporting
just one could turn out to be confusing e.g. if name resolution failed
in a SRV record list.
|
|
If we have files in partial/ from a previous invocation or similar such
those could be symlinks created by file:// sources. The code is
expecting only real files through and happily changes owner,
modification times and permission on the file the symlink points to
which tend to be files we have no business in touching in this way.
Permissions of symlinks shouldn't be changed, changing owner is usually
pointless to, but just to be sure we pick the easy way out and use
lchown, check for symlinks before chmod/utimes.
Reported-By: Mattia Rizzolo on IRC
|
|
The test makes heavy use of disabling compression types which are
usually available some way or another like xz which is how the EIPP
logs are compressed by default. Instead of changing this test to change
the filename according to the compression we want to test we just
disable EIPP logging for this test as that is easier and has the same
practical effect.
Gbp-Dch: Ignore
|
|
If other logs can't be written this is a warning to,
so for consistency sake translate the errors to warnings.
|
|
Unlikely to happen in practice and I wonder more how I could miss these
in earlier reviews, but okay, lets fix it for consistency now.
|
|
If libapt has builtin support for a compression type it will create a
dummy compressor struct with the Binary set to 'false' as it will catch
these before using the generic pipe implementation which uses the
Binary. The catching happens based on configured Names through, so you
can actually force apt to use the external binaries even if it would
usually use the builtin support. That logic fails through if you don't
happen to have these external binaries installed as it will fallback to
calling 'false', which will end in confusing 'Write error's.
So, this is again something you only encounter in constructed testing.
Gbp-Dch: Ignore
|
|
This is in so far pointless as the first match will deal with the
extension, so we don't actually ever use these second instances –
probably for the better as most need arguments to behave as epected &
more importantly: the point of the exercise disabling their use for
testing proposes.
Gbp-Dch: Ignore
|
|
The generated dump output is incorrect in sofar as it uses the name as
the key for this compressor, but they don't need to be equal as is the
case if you force some of the inbuilt ones to be disabled as our testing
framework does it at times.
This is hidden from changelog as nobody will actually notice while
describing it in a few words make it sound like an important change…
Git-Dch: Ignore
|
|
methods/http.cc:640:13: runtime error: reference binding to null pointer
of type 'struct FileFd'
This reference is never used in the cases it has a nullptr, so the
practical difference is non-existent, but its a bug still.
Reported-By: gcc -fsanitize=undefined
|
|
It can be handy to set apt options for the testcases which shouldn't be
accidentally committed like external planner testing or workarounds for
local setups.
Gbp-Dch: Ignore
|
|
Gbp-Dch: ignore
|
|
This caused a crash because the cache was a nullptr.
Closes: #829651
|
