summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-08-31do delay the test for http, too, to make it more reliableDavid Kalnischkies
The file method was already slowed down and somehow I thought I had done the same for http, but it turns out that I didn't. Giving it the same delay as file should help in making this test slower and therefore more likely to successfully test what it is supposed to test. Git-Dch: Ignore
2015-08-31remove Christian Perrier from Uploaders as requestedDavid Kalnischkies
Closes: #783337 Thanks: Christian for all the l10n, code & social contributions!
2015-08-31Czech program translation updateMiroslav Kure
Closes: 797329
2015-08-31fix valid-until-min typo in sources.list(5)David Kalnischkies
Git-Dch: Ignore
2015-08-31if file is inaccessible for _apt, disable privilege drop in acquireDavid Kalnischkies
We had a very similar method previously for our own private usage, but with some generalisation we can move this check into the acquire system proper so that all frontends profit from this compatibility change. As we are disabling a security feature here a warning is issued and frontends are advised to consider reworking their download logic if possible. Note that this is implemented as an all or nothing situation: We can't just (not) drop privileges for a subset of the files in a fetcher, so in case you have to download some files with and some without you need to use two fetchers.
2015-08-31ignore for _apt inaccessible TMPDIR in pkgAcqChangelogDavid Kalnischkies
Using libpam-tmpdir caused us to create our download tmp directory in root's private tmp before changing to _apt, which wouldn't have access to it. By extending our GetTempDir method with an optional wrapper changing the effective user, we can test if a given user can access the directory and ignore TMPDIR if not instead of ignoring TMPDIR completely. Closes: 797270
2015-08-30detect and deal with indextarget duplicatesDavid Kalnischkies
Multiple targets downloading the same file is bad™ as it leads us to all sorts of problems like the acquire system breaking or simply a problem of which settings to use for them. Beside that this is most likely a mistake and silently ignoring it doesn't help the user realizing his mistake… On the other hand, we have 'duplicates' which are 'created' by how we create indextargets, so we have to prevent those from being created to but do not emit a warning for them as this is an implementation detail. And then, there is the absolute and most likely user mistake: Having the same target(s) activated in multiple entries.
2015-08-30implement $(NATIVE_ARCHITECTURE) substvar for indextargetsDavid Kalnischkies
2015-08-29try xz instead of bz2 first for compressed filesDavid Kalnischkies
xz has pretty much won "the compressor war" and e.g. the Debian archive doesn't even distribute bz2 anymore in favor of 'xz' and 'gz', so by changing the default order we have a more realistic --print-uris behavior as it will always show the first compressor. In practice this effects repositories without a Release file (very bad, we don't want to support them anymore anyhow) as xz will be tried before bz2 now [which is probably not available, but so might be bz2…] AND repositories which provide both, bz2 and xz (which isn't too common) in sofar as apt will now download xz instead of bz2. Users with special needs can stick with bz2 as first compressor tried with Acquire::CompressionTypes::Order:: "bz2"; (see man apt.conf) – but users with special needs usually prefer "gz" anyhow, so the realworld change is expected to be very low.
2015-08-29implement indextargets option 'DefaultEnabled'David Kalnischkies
Some targets like Contents-udeb are special-needs targets. Shipping the configuration snippet for them is okay, but they shouldn't be downloaded by default. Forcing the user to enable targets by uncommenting targets is wrong and this would still not really solve the problem completely as even if you want to download some -udebs it will probably not be for all sources you have enabled, so having the possibility of disabling a target by default, but giving the user the option to enable it on a per-source entry basis is better.
2015-08-29use c++11 algorithms to avoid strange compiler warningsDavid Kalnischkies
Nobody knows what makes the 'unable to optimize loop' warning to appear in the sourceslist minus-options parsing, especially if we use a foreach loop, but we can replace it with some nice c++11 algorithm+lambda usage, which also helps in making even clearer what happens here. And as this would be a lonely change, lets do it for a few more loops as well where I might or might not have seen the warning at some point in time, too. Git-Dch: Ignore
2015-08-28implement PDiff patching for compressed filesDavid Kalnischkies
Some additional files like 'Contents' are very big and should therefore kept compressed on the disk, which apt-file did in the past. It also implemented pdiff patching of these files by un- and recompressing these files on-the-fly, with this commit we can do the same – but we can do this in both pdiff patching styles (client and server merging) and secured by hashes. Hashes are in so far slightly complicated as we can't compare the hashes of the compressed files as we might compress them differently than the server would (different compressor versions, options, …), so we must compare the hashes of the uncompressed content. While this commit has changes in public headers, the classes it changes are marked as hidden, so nobody can use them directly, which means the ABI break is internal only.
2015-08-27auto-prefix $(SITE) for indextargets Description fieldDavid Kalnischkies
This updates the documentation for a change which actually happened in c2a4a8dded2dfb56dbcab9689b6cb4b96c9999b6 already. The acquire system expects the $(SITE) to be there (e.g. for mirror rewriting) so we are better of prefixing it automatically than giving frontends the chance to forget it. There is no point in not showing $(SITE) first anyway.
2015-08-27sources.list and indextargets option for pdiffsDavid Kalnischkies
Disabling pdiffs can be useful occasionally, like if you have a fast local mirror where the download doesn't matter, but still want to use it for non-local mirrors. Also, some users might prefer it to only use it for very big indextargets like Contents.
2015-08-27Release 1.11~exp111.1.exp11Julian Andres Klode
2015-08-27Fix test-security-no-remote-statusJulian Andres Klode
Gbp-Dch: ignore
2015-08-27Do not parse Status fields from remote sourcesJulian Andres Klode
This could allow an attacker to mark a package as installed in a remote package index, as long as the package was not listed in the dpkg status file. This way, an attacker could force the installation of a package during a dist-upgrade, by providing two packages in an index, an older marked as installed, and a newer - apt would "upgrade" to the newer version.
2015-08-27Merge branch 'feature/extractar-filefd' into debian/experimentalJulian Andres Klode
2015-08-27Use compressor support from FileFd for ExtractTar instead of programsJulian Andres Klode
This way we do not depend on the decompressor programs anymore.
2015-08-27Add test for using ExtractTar on compressed filesJulian Andres Klode
Git-Dch: ignore
2015-08-27Always close compressed files in FileFdJulian Andres Klode
We dup() the file descriptor when opening compressed files, so we always need to close the dup()ed one. Furthermore, not unsetting the d-pointer causes issues when running OpenDescriptor() multiple times on the same file descriptor.
2015-08-27install: Set a local deb as the candidate for that packageJulian Andres Klode
This ensures that we can install .deb files that are not the candidate for a given package.
2015-08-27cacheset: Prefer the depcache over the policy againJulian Andres Klode
By preferring the policy over the depcache, we ignore any changes we made in the depcache, which makes it impossible for code to change the candidate used here. This basically reverts commit 2fbfb111312257fa5fc29b0c2ed386fb712f960e: prefer the Policy if it is built instead of the DepCache and if DepCache is not available as fallback built the Policy But it also cleans the code up a bit, by removing one level of nesting.
2015-08-27debian/rules: Only do parallel build if specified in DEB_BUILD_OPTIONSJulian Andres Klode
It was not nice to use 2 * number of cores in all cases. Thanks: Jakub Wilk for the suggestion
2015-08-27allow explicit dis/enable of IndexTargets in sources optionsDavid Kalnischkies
While Target{,-Add,-Remove} is available for configuring IndexTargets already, allow Targets to be mentioned explicitely as yes/no options as well, so that the Target 'Contents' can be disabled via 'Contents: no' as well as 'Target-Remove: Contents'.
2015-08-27not all targets are deb-src targetsDavid Kalnischkies
Sometimes too much refactoring can have bad effects. Thanks: Niels Thykier for reporting on IRC Git-Dch: Ignore
2015-08-27use always priv-dropping for changelog download as rootDavid Kalnischkies
First of, the temporary directory we download the changelog to needs to be owned by _apt, but that also means that we don't need to check if we could/should drop privs as the download happens to a dedicated tempdir and only after that it is moved to its final location by a privileged user.
2015-08-27fix various typos reported by codespellDavid Kalnischkies
Reported-By: codespell
2015-08-27lintian: don't show the typofix as a typoDavid Kalnischkies
Git-Dch: Ignore
2015-08-27add a libapt-pkg recommends aptDavid Kalnischkies
For many usecases like the acquire system libapt-pkg actually needs tools and config found in the apt package. apt tends to be installed everywhere libapt-pkg appears usually anyhow, but just in case to nudge users (and tools) in the right direction. Note that this isn't and shouldn't be a hard depends as there are usecases working perfectly without 'apt' and as this is such an esoteric problem incurring the costs arising from a Depends-Breaks-loop isn't deemd as worth it.
2015-08-27ignore AllowMem parameter in cache generationDavid Kalnischkies
The parameter name suggests that it should forbid the building of the entire cache in memory, but this isn't how it was previously and as AllowMem is false by default it actually prevents previous usecases from working like being root and configuring apt to build no caches at all. This should be fixed at some point to actually work, but that is hard to pull off as it means switching the default and some callers (including apt itself) actually did call it explicitly with false in certain cases for no apparent reason (at least now where it is common to have enough memory to throw at every problem and even if not is a slow apt usally better than an apt erroring out). Closes: 796459
2015-08-27correct 'apt update' download summary lineDavid Kalnischkies
Fetched() was reported for mostly nothing, while we should be calling it for files worked with from non-local sources (e.g. http, but not file or xz). Previously this was called from an acquire item, but got moved to the acquire worker instead to avoid having it (re)implemented in all items, but the checks were faulty.
2015-08-27Swedish program translation updateAnders Jonsson
Closes: 796059
2015-08-27just-in-time removal of broken essential packagesDavid Kalnischkies
We deal with Conflicts in SmartUnpack in pretty much the same way, but Breaks weren't handled in SmartConfigure so that the remove was sheduled after the configuration of the package breaking the to-be-removed. Closes: 796070
2015-08-27test for #796070: downgrades involving essential packagesJulian Andres Klode
Git-Dch: Ignore
2015-08-27tests: check apt-get source release name switching with -tDavid Kalnischkies
Git-Dch: Ignore
2015-08-27Fix more instances of missing remapping handlingJulian Andres Klode
After fixing Bug#796999, we noticed that there were some more instances of iterators which had no associated Dynamic object, causing them to not be updated when the cache was remapped. This happened in two places: In NewPackage() and in NewProvidesAllArch(). Gbp-Dch: ignore
2015-08-27pkgcachegen: Account for remapping when parsing depends from NewPackageJulian Andres Klode
In both the Ver and Dep variables, we need to account for remapping, as otherwise we would still reference the old bug. Reproduction environment: * An i386 system with amd64 foreign architecture * A sources.list with deb http://snapshot.debian.org/archive/debian/20150826T102846Z/ unstable main deb http://snapshot.debian.org/archive/debian/20150826T102846Z/ experimental main Thanks: Jakub Wilk for the bug report and the backtraces Closes: #796999
2015-08-24releasing package apt version 1.1~exp101.1.exp10Michael Vogt
2015-08-24Fix typoMichael Vogt
Thanks: Julian Andres Klode Git-Dch: ignore
2015-08-21doc/apt.conf.5.xml: document Acquire::EnableSrvRecodsMichael Vogt
Git-Dch: ignore
2015-08-20postinst: Correctly pass --home instead of -home, and fixup old userJulian Andres Klode
Thanks: Niels Thykier for reporting this on IRC
2015-08-20Re-indent GetCandidateVerNew() and make ConsiderFiles argument explicitJulian Andres Klode
Gbp-Dch: ignore
2015-08-20Merge remote-tracking branch 'mvo/feature/srv-records' into debian/experimentalMichael Vogt
2015-08-20Add basic (non weight adjusted) shuffling for SrvRecords selectionMichael Vogt
Also add "Debug::Acquire::SrvRecs" debug option and the option "Acquire::EnableSrvRecods" to allow disabling this lookup.
2015-08-19Support tabs in sources.list filesJulian Andres Klode
Also support vertical tabs, as isspace() does the same. Closes: #796067
2015-08-18Add support for "apt-cache showsrc --only-source srcpkgname"Michael Vogt
Thanks: Steve Slangasek for the suggestion Closes: 695633
2015-08-18Provide "apt-get full-upgrade" to match "apt full-upgrade"Michael Vogt
2015-08-18apt-pkg/contrib/srvrec.cc: res_query() should not generate a _error->Warning()Michael Vogt
2015-08-18cleanupMichael Vogt