summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-08-26test: Make sure we always find a dpkg in status fileJulian Andres Klode
Especially on non-Debian platforms, dpkg might not list itself on the host system, and thus dpkg --assert-multi-arch fails. Gbp-Dch: ignore
2016-08-26test: Avoid use of /proc/self/fdJulian Andres Klode
Use /dev/fd in test-bug-712116-dpkg-pre-install-pkgs-hook-multiarch, skip test-no-fds-leaked-to-maintainer-scripts (it is not guaranteed that /dev/fd contains all file descriptors), and avoid the unneeded use of /proc/fd in another test case. Gbp-Dch: ignore
2016-08-26test: Explicitly pass --admindir=var/lib/dpkg to dpkgJulian Andres Klode
Our test suite assumes that dpkg's admindir is var/lib/dpkg. This might not always be true; for example, on FreeBSD, it is located at /var/db/dpkg. Gbp-Dch: ignore
2016-08-26test: Fix building of noopchrootJulian Andres Klode
Gbp-Dch: ignore
2016-08-26test: Get rid of debhelper rules.tiny example depJulian Andres Klode
Gbp-Dch: ignore
2016-08-26test: Allow moreutils-parallel instead of parallelJulian Andres Klode
That's what it's called on FreeBSD. Gbp-Dch: ignore
2016-08-26test: Allow stunnel to be used instead of stunnel4Julian Andres Klode
This is needed for Fedora and FreeBSD. Gbp-Dch: ignore
2016-08-26test: Substitute GNU commands for other commands where availableJulian Andres Klode
We are simply checking for gnuCMD and gCMD for each command we are interested in. Gbp-Dch: ignore
2016-08-26test: Use C locale instead of C.UTF-8Julian Andres Klode
Gbp-Dch: ignore
2016-08-26Make directory paths configurableJulian Andres Klode
This allows other vendors to use different paths, or to build your own APT in /opt for testing. Note that this uses + 1 in some places, as the paths we receive are absolute, but we need to strip of the initial /.
2016-08-26apt-key: Only use readlink -f for existing componentsJulian Andres Klode
On FreeBSD, readlink -f requires the last component to exist.
2016-08-26Use C locale instead of C.UTF-8 for protocol stringsJulian Andres Klode
The C.UTF-8 locale is not portable, so we need to use C, otherwise we crash on other systems. We can use std::locale::classic() for that, which might also be a bit cheaper than using locale("C").
2016-08-26CMake: Add support for libintlJulian Andres Klode
This basically just links everything to libintl if USE_NLS is on. It would be better to just link those targets that are actually translated, but doing so is a huge PITA. Also move the include_directories() for the build-tree include/ directory to the top of the CMakeLists.txt, otherwise it only gets passed after Intl_INCLUDE_DIRS, which means we will built against installed apt-pkg headers (if any) instead of our own. Gbp-Dch: ignore
2016-08-26CMake: Handle Berkeley DB on FreeBSDJulian Andres Klode
The BSD systems still ship their own db.h with a historical BSD implementation, which is preferred by CMake, as it searches its default path first. We thus have to disable the DEFAULT_PATH for the search, unfortunately. We also need to pass the correct include directory to the target. Furthermore, on FreeBSD the library is called db-<VERSION>, so let's add db-5 to the list of allowed names. Gbp-Dch: ignore
2016-08-26methods/connect.cc: Only use AI_IDN if definedJulian Andres Klode
Gbp-Dch: ignore
2016-08-26CMake/private-download: Fix statfs includes on FreeBSDJulian Andres Klode
On FreeBSD, we have to include sys/params.h and sys/mount.h, not sys/vfs.h. Gbp-Dch: ignore
2016-08-26CMake: Add FindLZ4 and FindLZMAJulian Andres Klode
This makes things work with /usr/local on FreeBSD. Gbp-Dch: ignore
2016-08-26CMake: Do not use -lresolv if res_init exists in libcJulian Andres Klode
Gbp-Dch: ignore
2016-08-26CMake: Do not hardcode -ldlJulian Andres Klode
Does not exist on FreeBSD Gbp-Dch: ignore
2016-08-26CMake: Handle endian.h locations on other platformsJulian Andres Klode
Gbp-Dch: ignore
2016-08-26CMake: Handle BSD platforms with sig_t instead of sighandler_tJulian Andres Klode
Somewhat annoying, but OK. Might want to switch to something more clever to get rid of the typedef at all. Gbp-Dch: ignore
2016-08-26Add missing includes and external definitionsJulian Andres Klode
Several modules use std::array without including the array header. Bad modules. Some modules use STDOUT_FILENO and friends, or close() without including unistd.h, where they are defined. One module also uses WIFEXITED() without including sys/wait.h. Finally, environ is not specified to be defined in unistd.h. We are required to define it ourselves according to POSIX, so let's do that.
2016-08-23CMake: Define _WITH_GETLINE for FreeBSDJulian Andres Klode
Gbp-Dch: ignore
2016-08-23CMake: Do not add po/ if USE_NLS is OFFJulian Andres Klode
Previously, we would have generated all the translations, but not turn them on in the code. Instead, move the Translation crap into po/ and disable po/ alltogether if USE_NLS if OFF.
2016-08-23CMake: Discover docbook stylesheet in other locationsJulian Andres Klode
Distributions seem to install this stuff all over the place, so let's add a common list of paths we know about.
2016-08-23install-progress: Call the real ::fork() in our fork() methodJulian Andres Klode
We basically called ourselves before, creating an endless loop. Reported-By: clang
2016-08-23CMake: Add Large File SupportJulian Andres Klode
This module should cover all sorts of large file supports, as long as they either support the getconf LFS_CFLAGS command; or the _FILE_OFFSET_BITS=64 or _LARGE_FILES macros. Closes: #834767
2016-08-23prevent C++ locale number formatting in text APIs (try 3)David Kalnischkies
This time it is the formatting of floating numbers in progress reporting with a radix charater potentially not being dot. Followup of 7303e11ff28f920a6277c159aa46f80c007350bb. Regression of b58e2c7c56b1416a343e81f9f80cb1f02c128e25 in so far as it exchanging very effected with slightly less effected code. LP: 1611010
2016-08-23do dpkg --configure before --remove/--purge --pendingDavid Kalnischkies
Commit 7ec343309b7bc6001b465c870609b3c570026149 got us most of the way, but the last mile was botched by having the pending calls in the wrong order as this way we potentially 'force' dpkg to remove/purge a package it doesn't want to as another package still depends on it and the replacement isn't fully installed yet. So what we do now is a configure before remove and purge (all with --no-triggers) and finishing off with another configure pending call to take care of the triggers. Note that in the bugreport example our current planner is forcing dpkg to remove the package earlier via --force-depends which we could do for the pending calls as well and could be used as a workaround, but we want to do less forcing eventually. Closes: 835094
2016-08-20zh_CN.po: update simplified Chinese translationZhou Mo
2016-08-20CMake: Fix uninitialized variablesJulian Andres Klode
This fixes some actual bugs for PROJECT and BZIP2_INCLUDE_DIR. Gbp-Dch: ignore
2016-08-20CMake: Translations: Build byproduct before outputJulian Andres Klode
This can lead to an inconsistent state otherwise, with the output being updated and the byproduct not; for example, when the build was manually interrupted.
2016-08-20debian: Get rid of dh_movefiles againJulian Andres Klode
This workaround is a bit more ugly, but does not use a (somewhat) deprecated debhelper command. Gbp-Dch: ignore
2016-08-19debian: Run wrap-and-sortJulian Andres Klode
Manually clean up the apt.maintscript, it moved stuff from before the comment to after the comment...
2016-08-19debian: Drop outdated stuffJulian Andres Klode
The README.source is not usable anymore, and the Build-Conflicts andd Breaks/Replaces are not needed anymore.
2016-08-19debian: Add more lintian overridesJulian Andres Klode
2016-08-19debian: Switch to debhelper 10Julian Andres Klode
debhelper 10 is much nicer with the installation part from a dirty tree, so you can just fix some stuff breaking the install step and then continue building with debuild -b -nc until you have fixed all your stuff. It also has some other advantages, of course, like some bug fixes in shell escaping for maintscript, or systemd helper changes.
2016-08-19debian: Make better use of the tree installed by CMakeJulian Andres Klode
This gets rid of the special casing of etc/apt, various example file installations handled by the upstream build system, and of course the directory creation for all dirs created by the upstream build system.
2016-08-19CMake: Install config and logging directoriesJulian Andres Klode
These directories are essential for apt to work, so we should install them in the upstream build system and not just in the debian packaging...
2016-08-19tests/control: Handle the gpg1/gpg2 mess a bit betterJulian Andres Klode
Hardcoding gpgv1 and gnupg1 breaks Ubuntu, because on Ubuntu, these packages do not exist yet. Instead allow gnupg (<< 2) for gnupg1 and gnupg2 for gnupg (>= 2), so we cover all potential combinations.
2016-08-19prepare-release: Use equivs and gdebi-core for travis depsJulian Andres Klode
Our previous hack did not really support or groups and other more advanced dependency types. This hack basically removes build profiles, and the @-type depends for tests, and otherwise converts the deps to a package which is then installed via gdebi.
2016-08-19Ignore SIGINT and SIGQUIT for Pre-Install hooksJulian Andres Klode
Instead of erroring out when receiving a SIGINT, let the child deal with it - we'll error out anyway if the child exits with an error or due to the signal. Also ignore SIGQUIT, as system() ignores it. This basically fixes Bug #832593, but: we are running the hooks via sh -c. Some shells exit with a signal error even if the command they are executing catches the signal and exits successfully. So far, this has been noticed on dash, which unfortunately, is our default shell. Example: $ cat trap.sh trap 'echo int' INT; sleep 10; exit 0 $ if dash -c ./trap.sh; then echo OK: $?; else echo FAIL: $?; fi ^Cint FAIL: 130 $ if mksh -c ./trap.sh; then echo OK: $?; else echo FAIL: $?; fi ^Cint OK: 0 $ if bash -c ./trap.sh; then echo OK: $?; else echo FAIL: $?; fi ^Cint OK: 0
2016-08-19CMake: Translations: Pass --previous to msgmergeJulian Andres Klode
When updating our .po files, pass --previous to msgmerge to make it easier for translators to translate fuzzy strings. Thanks: Guillem Jover for the suggestion.
2016-08-19CMake: Translations: Don't rebuild .mo for line number changesJulian Andres Klode
If only the line numbers changed in a file without any of the translatable strings changing, the .po and .mo files were rebuilt, making building simple code changes somewhat annoying. We can work around this by passing --add-location=file to msgcomm when we are creating the temporary .pot file used for building the .mo files.
2016-08-18debian: Install etc/apt if present (e.g., on Ubuntu)Julian Andres Klode
On Ubuntu, cmake installs are vendor-specific apt.conf.d snippet, causing the build to fail.
2016-08-17Release 1.3~rc21.3_rc2Julian Andres Klode
2016-08-17methods: read config in most to least specific orderDavid Kalnischkies
The implementation of the generic config fallback did the fallback in the wrong order so that the least specific option wasn't the last value picked but in fact the first oneā€¦ doh! So in the bugreports case http -> https -> http::<hostname> -> https::<hostname> while it should have been the reverse as before. Regression-In: 30060442025824c491f58887ca7369f3c572fa57 Closes: 834642
2016-08-17don't count each Type as an individual deb822-sources stanzaDavid Kalnischkies
Reported-By: Mattia Rizzolo <mattia@debian.org> in #834629
2016-08-17add --with-source option and Packages/Sources supportDavid Kalnischkies
We support "./foobar.deb" as a way to install a deb file directly. Recently .changes files were added. This highlights a problem as you can't add the changes file without also trying to install all of them. Now, it could also be handy to add entire Packages/Sources files to perhaps get a bunch of packages in without installing them all implicitly. This commit introduces --with-source which allows to add *.deb, *.changes, *.dsc, source-dirs, Packages & Sources files (the later can also be compressed) without also installing them.
2016-08-17allow spaces in fingerprints for 'apt-key del'David Kalnischkies
Fingerprints tend to be displayed in space-separated octet pairs so be nice and allow delete to remove a key based on such a string rather than requiring that the user is deleting all the spaces manually.