summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-11-04refactor dpkg execution in deb/debsystemDavid Kalnischkies
We have a few places and there will be a few more still where we have to call dpkg to detect/set certain features or settings. Centralizing the calling infrastructure now seems like a good idea before we add another.
2015-11-04switch 'apt-mark hold' from Pkg to Ver based operationDavid Kalnischkies
Users hold a package foo (at version X) or try to prevent the installation of foo (usually based on the information they know about version X), even if we say that we "hold a package". Conceptionally we also need to know about which architecture we are talking and that is an information bound to a version (as a package can change architecture over time). We internally did this lookup from Pkg to Ver already, we just move this to a central place where the user has a change to influence it now. Git-Dch: Ignore
2015-11-04add cacheset push_back wrapping for std::back_inserterDavid Kalnischkies
As usual by now, not all containers wrapped by the cacheset containers support all methods, like push_back now, but they fail on use of these unusable methods only. Would be nice to not expose these methods for unsupporting containers at all, but that means either a lot of classes or a lot of std::enable_if magic, which seems like too big work for this small wrapper for now. Git-Dch: Ignore
2015-11-04implement operator* for cacheset iteratorsDavid Kalnischkies
Technically an abi-break as we change a template parameter to std::iterator for this, but this class is empty in all instances and just causes the right typedefs to be set – which were incorrect as detected by std::stable_partition as its implementation uses ::pointer and needs also a operator* implementation. In practice CacheSets have no external users (yet) and the difference is visible only at compile time (which was an error before and now works), not while linking. The changes to apt-mark are functionally identical to the code before, just that we use a std:: algorithm now instead of trying hard on our own.
2015-11-04implement a public pkgSystem::ArchitecturesSupportedDavid Kalnischkies
2015-11-04implement a public pkgSystem::MultiArchSupportedDavid Kalnischkies
Some codepaths need to check if the system (in our case usually dpkg) supports MultiArch or not. We had copy-pasted the check so far into these paths, but having it as a system check is better for reusability.
2015-11-04travis: move 'make' into the install targetDavid Kalnischkies
This auto-collapses the output and doesn't run the tests if we compiling fails as a bonus. Git-Dch: Ignore
2015-11-04Turkish program translation updateMert Dirik
Closes: 802610
2015-11-03configure.ac: Only require autoconf 2.68Julian Andres Klode
This makes it compileable on the trusty travis-ci instance. Gbp-Dch: ignore
2015-11-03configure.ac: Run autoupdateJulian Andres Klode
Gbp-Dch: ignore
2015-10-30thread-safety tests: Adjust path to listsJulian Andres Klode
Gbp-Dch: ignore
2015-10-30Provide tests for thread-safetyJulian Andres Klode
These scripts currently produce HTML output that is directly piped into an HTML file on alioth. There are three categories. The first two check external library calls to use the ones specified by POSIX to be thread-safe. The main profile excludes functions that are thread-safe on Linux or glibc in general, while the portable output strictly follows posix. The internal.html output lists internal function calls, such as configuration setting. This is supposed to be automated further at some point, so we can automatically check for regressions.
2015-10-30orderlist: Replace qsort() by thread-safe std::sort()Julian Andres Klode
Gbp-Dch: ignore
2015-10-30algorithms: Replace qsort() by thread-safe std::sort()Julian Andres Klode
Gbp-Dch: ignore
2015-10-30dpkgpm: Convert users of localtime() to localtime_r()Julian Andres Klode
The former is not thread-safe, whereas the latter is. Gbp-Dch: ignore
2015-10-30cacheset: Fix compilation on new GCC in C++98 modeJulian Andres Klode
Since gcc 4.9, the API for erase slightly changed. In commit 3dddcdf2432e78f37c74d8c76c2c519a8d935ab2 the existing checks for __cplusplus where changed to check the gcc version, as the __cplusplus check did nothing, because gcc 4.8 already provided the standard value in there. Fix the code to check for the gcc version in two more places, and change the existing checks to use a convenience macro.
2015-10-30srvrec: Do not expose C++11 tuple use in headerJulian Andres Klode
This makes non-C++11 reverse deps wishing to use it FTBFS.
2015-10-30dpkgpm: Use ptsname_r() instead of ptsname() to be thread-safeJulian Andres Klode
This function only exists on a limited number of platforms, so we add a configure check to make sure it exists. Gbp-Dch: ignore
2015-10-30dpkgpm: Convert ctime() call to ctime_r()Julian Andres Klode
ctime() is not thread-safe, ctime_r() is. Gbp-Dch: ignore
2015-10-30aptconfiguration: Convert strtok() to strtok_r()Julian Andres Klode
strtok() is not thread-safe, whereas strtok_r() is. Gbp-Dch: ignore
2015-10-30GetSrvRecords: Make thread-safeJulian Andres Klode
Gbp-Dch: ignore
2015-10-23deblistparser: Make PrioList constJulian Andres Klode
More safety, less writeable memory.
2015-10-20releasing 1.1~exp141.1_exp14Michael Vogt
2015-10-20Allow -i and -u as aliases for installed and upgradable in listJulian Andres Klode
This makes things much easier to use
2015-10-11.travis.yml: Add pinned vivid for gettext and clean up a bitJulian Andres Klode
This adds a vivid pinned to -1, cleans up the file a bit by removing duplicate commands, and finally installs gettext with a new apt-get run that is passed -t vivid. The syntax for the pinning is some weird YAML stuff I don't want to think about...
2015-10-11Revert "Fix select timeout to be 50msec instead of 0.5msec" for acquireJulian Andres Klode
The acquire system actually uses usec pulse intervals, so the previous value was correct (500ms) whereas the new value is now 5s. It's a bit unfortunate that the two systems use different units for pulse intervals, but probably not much we can do about it. This partially reverts commit eaf21c2144fa8dc4be8581dc69cf88cb38e30ce2.
2015-10-05releasing package apt version 1.1~exp131.1.exp13Michael Vogt
2015-10-05Run "./prepare-release pre-export"Michael Vogt
Git-dch: ignore
2015-09-30Fix select timeout to be 50msec instead of 0.5msecMichael Vogt
Closes: #799857
2015-09-22Use --add-location=file for po/ and doc/poMichael Vogt
This avoids churn in the po/pot files when just the location line number in the source code changes. Git-Dch: ignore
2015-09-15tests: add a -j $jobs mode to test runner for parallel executionDavid Kalnischkies
Now that tests can be run in parallel, lets actually do it… The mode has some downsides like not collecting the failed tests, but it can be a lot faster than a sequential run and is therefore a good alternative in testing those "this shouldn't break anything" changes (which tend to break everything if untested). Git-Dch: Ignore
2015-09-15tests: don't use hardcoded port for http and httpsDavid Kalnischkies
This allows running tests in parallel. Git-Dch: Ignore
2015-09-14fallback to well-known URI if by-hash failsDavid Kalnischkies
We uses a small trick to implement the fallback: We make it so, that by-hash is a special compression algorithm and apt already knows how to deal with fallback between compression algorithms. The drawback with implementing this fallback is that a) we are guessing again and more importantly b) by-hash is only tried for the first compression algorithm we want to acquire, not for all as before – but flipping between by-hash and well-known for each compression algorithm seems to be not really worth it as it seems unlikely that there will actually be mirrors who only mirror a subset of compressioned files, but have by-hash enabled. The user-experience is the usual fallback one: You see "Ign" lines in the apt update output. The fallback is implemented as a transition feature, so a (potentially huge) mirror network doesn't need a flagday. It is not meant as a "someday we might" or "we don't, but some of our mirrors might" option – we want to cut down on the 'Ign' lines front so that they become meaningful – if we wanted to spam everyone with them, we could enable by-hash by default for all repositories… sources.list and config options are better suited for this. Closes: 798919
2015-09-14add by-hash sources.list option and document all of by-hashDavid Kalnischkies
This changes the semantics of the option (which is renamed too) to be a yes/no value with the special additional value "force" as this allows by-hash to be disabled even if the repository indicates it would be supported and is more in line with our other yes/no options like pdiff which disable themselves if no support can be detected. The feature wasn't documented so far and hasn't reached a (un)stable release yet, so changing it without trying too hard to keep compatibility seems okay.
2015-09-14tests: try to support spaces in TMPDIRDavid Kalnischkies
Not all tests work yet, most notable the cdrom tests, but those require changes in libapt itself to have a proper fix and what we have fixed so far is good enough progress for now. Git-Dch: Ignore
2015-09-14deal with spaces in path, command and filepaths in apt-keyDavid Kalnischkies
Filenames we get could include spaces, but also the tmpdir we work in and the failures we print in return a very generic and unhelpful… Properly supporting spaces is a bit painful as we constructed gpg command before, which is now moved to (multilevel) calls to temporary scripts instead.
2015-09-14tests: use SHA1 checksum only by default in testsDavid Kalnischkies
This is mostly a small speedup for the testcases, but it is also handy to document which tests actually deal with a specific hash compared to those which 'just' need some hash which can be important while adding new hashes. Git-Dch: Ignore
2015-09-14add --sha512 option + documentation for apt-ftparchiveDavid Kalnischkies
2015-09-14use APT::FTPArchive hash settings as default for APT::FPArchive::$filetypeDavid Kalnischkies
2015-09-14do not generate bogus hashes if hash is disabled in apt-ftparchiveDavid Kalnischkies
2015-09-14do not ignore differently versioned self-providesDavid Kalnischkies
Reported-By: Konomi on IRC
2015-09-14various changes to increase test-coverageDavid Kalnischkies
And of course, testing obscure things ends up showing obscure 'bugs' or better shortcomings/inconsitencies, so lets fix them with the tests. Git-Dch: Ignore
2015-09-14implement apt-get source msg 'Please use: $vcs' for gitDavid Kalnischkies
A bit unfair that only Bzr had this message. Lets at least print it for git as well with the option of adding more later without string changes.
2015-09-14dereference redirect in Vcs-Browser URI to cgitDavid Kalnischkies
Git-Dch: Ignore
2015-09-14srv test: do 100 pulls twice and compare listDavid Kalnischkies
The previous implementation was still a bit unstable in terms of failing at times. Lets try if we have more luck with this one. Git-Dch: Ignore
2015-09-14fix alloc-dealloc-mismatch (operator new [] vs operator delete)David Kalnischkies
Reported-By: gcc -fsanitize=address -fno-sanitize=vptr Git-Dch: Ignore
2015-09-14fix two memory leaks reported by gccDavid Kalnischkies
Reported-By: gcc -fsanitize=address -fno-sanitize=vptr Git-Dch: Ignore
2015-09-14use std-algorithms instead of manual loops to avoid overflow warningDavid Kalnischkies
Reported-By: gcc Understandable: no Git-Dch: Ignore
2015-09-14do not report deprecate warnings for the None declarationDavid Kalnischkies
This is defined for compatibility, warning about it is intended, but only in places where it is actually used, rather than at the place we declare it for compatability… Git-Dch: Ignore
2015-09-14move std=c++11 from CXXFLAGS to CXXDavid Kalnischkies
Setting CXXFLAGS like --coverage on the commandline fails if we set the std too late, so if we set it with the compiler name we set it always first. A bit hacky as it bends the expectation, but seems to work. Git-Dch: Ignore