summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-11-14Adjust libapt-pkg Breaks aptitude to << 0.8.9Julian Andres Klode
The << 0.8.11 was stronger than necessary, and breaks Ubuntu, which is unable to build aptitude 0.8.11 atm (the test suite fails since 0.8.10 in C++17 mode, only works in C++14, but 0.8.11 uses C++17 constructs).
2018-11-13Release 1.8.0~alpha21.8.0_alpha2Julian Andres Klode
2018-11-13Drop debian/source/options, not needed anymoreJulian Andres Klode
2018-11-13Revert "http: Fix handling of server connection closure"Julian Andres Klode
This reverts commit fb3f36593563d09a8d1727cc7c6deb0b49823ca2. It caused downloads to hang on long-lived connections on certain servers. Gbp-Dch: full
2018-11-12Release 1.8.0~alpha11.8.0_alpha1Julian Andres Klode
2018-11-12http: Fix handling of server connection closureJulian Andres Klode
If the server closed the connection while we're reading data, and we end up not having any data left to write; that is, for example, we received 0 bytes, then we did not exit before, as we only returned success if there was data to write. This is wrong: Obviously, if we have reached our limit, we are done anyway. It's a bit unclear if we actually ever reached this part, but it does make some sense wrt the bug below. LP: #1801338
2018-10-30Norwegian Bokmål program translation updatePetter Reinholdtsen
Closes: #912374
2018-10-30Fix typos encountered while updating de translationChris Leick
2018-10-30German manpage translation updateChris Leick
Reviewed-By: Helge Kreutzmann <debian@helgefjell.de>
2018-10-30Dutch manpage translation updateFrans Spiesschaert
Closes: #912022
2018-10-30Dutch program translation updateFrans Spiesschaert
Closes: #912021
2018-10-22Break pre-gcc8 aptitude and aptJulian Andres Klode
gcc 8 broke the ABI again. After they decided to switch mangling of ABI tags in return values from: U URI::operator std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >[abi:cxx11]() to: U URI::operator std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >() in gcc 7, they now removed the legacy symbol in gcc 8, causing us to break our ABI in turn for that one operator. We need more responsible gcc developers. Closes: #911090
2018-10-22NeverAutoRemove kernel meta packagesJulian Andres Klode
This gives more protection for people where kernel metapackages are accidentally removed. LP: #1787460
2018-10-14Merge branch 'feature/subkeys' into 'master'Julian Andres Klode
Support subkeys and multiple keyrings in Signed-By options See merge request apt-team/apt!27
2018-10-14Merge branch 'master' into 'master'Julian Andres Klode
apt-get.8: mention --only-source in 'source' and 'build-dep' description See merge request apt-team/apt!24
2018-10-14Merge branch 'master' into 'master'Julian Andres Klode
Default to https: scheme for fetching Debian changelogs See merge request apt-team/apt!30
2018-10-13Default to https: scheme for fetching Debian changelogsBen Hutchings
Closes: #910941
2018-10-07Release 1.7.01.7.0Julian Andres Klode
2018-10-07prepare-release: Fix last-modification detection for manpagesJulian Andres Klode
Pass -i to git log, so "Release foo" is detected as well, not just "release foo", and also handle the rename of Git-Dch to Gbp-Dch.
2018-10-05Set DPKG_FRONTEND_LOCKED when running {pre,post}-invoke scriptsJulian Andres Klode
Some post-invoke scripts install packages, which fails because the environment variable is not set. This sets the variable for all three kinds of scripts {pre,post-}invoke and pre-install-pkgs, but we will only allow post-invoke at a later time. Gbp-Dch: full
2018-10-02apt-mark: showhold: typo-fix (package -> packages)Muhamed Huseinbašić
See merge request apt-team/apt!29 [jak@d.o: Also adjust translations, provide better subject]
2018-09-27Show APT::Compressor example in apt.conf(5)David Kalnischkies
Including a block-element like informalexample in a para is legal, but the documentation of the para tag hints that some processing systems may have difficulties handling this – so lets just move it out of the block and be happy as it is (again?) displayed. Closes: #909712
2018-09-24pkgCacheFile: Only unlock in destructor if locked beforeJulian Andres Klode
pkgCacheFile's destructor unlocks the system, which is confusing if you did not open the cachefile with WithLock set. Create a private data instance that holds the value of WithLock. This regression was introduced in commit b2e465d6d32d2dc884f58b94acb7e35f671a87fe: Join with aliencode Author: jgg Date: 2001-02-20 07:03:16 GMT Join with aliencode by replacing a "Lock" member that was only initialized when the lock was taken by calls to Lock, UnLock; with the latter also taking place if the former did not occur. Regression-Of: b2e465d6d32d2dc884f58b94acb7e35f671a87fe LP: #1794053
2018-09-24Fix calculation of elapsed usec in downloadsJulian Andres Klode
A recent change to use chronos inadvertently replaced the difference of new usec - old usec with new sec - old usec, which is obviously wrong.
2018-09-20Release 1.7.0~rc21.7.0_rc2Julian Andres Klode
2018-09-20Deal with descriptions embedded in displayed record correctlyDavid Kalnischkies
The implementation of "apt-cache show" (not "apt show") incorrectly resets the currently used parser if the record itself and the description to show come from the same file (as it is the case if no Translation-* files are available e.g. after debootstrap). The code is more complex than you would hope to support some rather unusual setups involving Descriptions and their translations as tested for by ./test-bug-712435-missing-descriptions as otherwise this could be a one-line change. Regression-Of: bf53f39c9a0221b670ffff74053ed36fc502d5a0 Closes: #909155
2018-09-18Release 1.7.0~rc1 to unstable1.7.0_rc1Julian Andres Klode
2018-09-18Merge branch 'pu/keep-pipelining-after-close' into 'master'Julian Andres Klode
http: Stop pipeline after close only if it was not filled before See merge request apt-team/apt!25
2018-09-18http: Stop pipeline after close only if it was not filled beforeJulian Andres Klode
It is perfectly valid behavior for a server to respond with Connection: close eventually, even when pipelining. Turning off pipelining due to that is wrong. For example, some Ubuntu mirrors close the connection after 101 requests. If I have more packages to install, only the first 101 would benefit from pipelining. This commit introduces a new check to only turn of pipelining for future connections if the pipeline for this connection did not have 3 successful fetches before, that should work quite well to detect broken server/proxy combinations like in bug 832113.
2018-09-18Merge branch 'bugfix/statusfd' into 'master'Julian Andres Klode
Process all of --status-fd and don't expect duplicate status msg See merge request apt-team/apt!26
2018-09-15Show all architectures in 'apt list' outputDavid Kalnischkies
The uniqueness in std::set containers is ensured by the ordering operator we provide, but it was not considering that different versions can have the same description like the different architectures for a version of a package. Closes: #908218
2018-09-12clarificationDamyan Ivanov
do not suggest that 'source' and 'build-dep' arguments are binary package names only
2018-09-11Support multiple keyrings in sources.list Signed-ByDavid Kalnischkies
A user can specify multiple fingerprints for a while now, so its seems counter-intuitive to support only one keyring, especially if this isn't really checked or enforced and while unlikely mixtures of both should work properly, too, instead of a kinda random behaviour.
2018-09-11Support subkeys properly in Signed-By optionsDavid Kalnischkies
If we limit a file to be signed by a certain key it should usually accept also being signed by any of this keys subkeys instead of requiring each subkey to be listed explicitly. If the later is really wanted we support now also the same syntax as gpg does with appending an exclamation mark at the end of the fingerprint to force no mapping.
2018-09-11Reorder progress report messagesDavid Kalnischkies
We are seeing 'processing' messages from dpkg first, so it makes sense to translate them to "Preparing" messages instead of using "Installing" and co to override these shortly after with the "Preparing" messages. The difference isn't all to visible as later messages tend to linger far longer in the display than the ealier ones, but at least in a listing it seems more logical.
2018-09-11Don't expect duplicated dpkg status-fd messagesDavid Kalnischkies
The progress reporting relies on parsing the status reports of dpkg which used to repeat being in the same state multiple times in the same run, but by fixing #365921 it will stop doing so. The problem is in theory just with 'config-files' in case we do purge as this (can) do remove + purge in one step, but we remove this also for the unpack + configure combination althrough we handle these currently in two independent dpkg calls.
2018-09-11Process status-fd completely before finishing dpkg callDavid Kalnischkies
Exiting the processing loop as soon as the dpkg process finishes might leave status-fd lines unprocessed which wasn't much of a problem in the past as the progress would just be slightly off, but now that we us the information also for skipping already done tasks and generate warnings if we didn't see all expected messages we should make sure we seem them all. We still need to exit "early" if dpkg exited unsuccessfully/crashed through as the (remaining) status lines we get could be incomplete.
2018-09-11Unset more environment variables in test frameworkDavid Kalnischkies
It is an uphill battle to "reset" the environment to a clean state without making it needlessly hard to use 'good' environment variables, so we just try a little harder here without really trying for completeness. Gbp-Dch: Ignore
2018-09-10Don't use gpg directly in apt-key testDavid Kalnischkies
Reported-By: Guillem Jover <guillem@debian.org> Gbp-Dch: Ignore
2018-08-29Fix typos reported by codespell & spellintianDavid Kalnischkies
No user-visible change as it effects mostly code comments and not a single error message, manpage or similar. Reported-By: codespell & spellintian Gbp-Dch: Ignore
2018-08-29Don't use invalid iterator in Fallback-Of handlingDavid Kalnischkies
cppcheck reports: (error) Iterator 't' used after element has been erased. The loop is actually fashioned to deal with this (not in the most efficient way, but in simplest and speed isn't really a concern here) IF this codepath had a "break" at the end… so I added one. Note that the tests aren't failing before (and hopefully after) the change as the undefined behavior we encounter is too stable. Thanks: David Binderman for reporting
2018-08-28fr.po: Do not translate the apt-ftparchive commandsLaurent Bigonville
Closes: #907481
2018-08-20Release 1.7.0~alpha31.7.0_alpha3Julian Andres Klode
2018-08-20clear alternative URIs for mirror:// between steps (CVE-2018-0501)David Kalnischkies
APT in 1.6 saw me rewriting the mirror:// transport method, which works comparable to the decommissioned httpredir.d.o "just" that apt requests a mirror list and performs all the redirections internally with all the bells like parallel download and automatic fallback (more details in the apt-transport-mirror manpage included in the 1.6 release). The automatic fallback is the problem here: The intend is that if a file fails to be downloaded (e.g. because the mirror is offline, broken, out-of-sync, …) instead of erroring out the next mirror in the list is contacted for a retry of the download. Internally the acquire process of an InRelease file (works with the Release/Release.gpg pair, too) happens in steps: 1) download file and 2) verify file, both handled as URL requests passed around. Due to an oversight the fallbacks for the first step are still active for the second step, so that the successful download from another mirror stands in for the failed verification… *facepalm* Note that the attacker can not judge by the request arriving for the InRelease file if the user is using the mirror method or not. If entire traffic is observed Eve might be able to observe the request for a mirror list, but that might or might not be telling if following requests for InRelease files will be based on that list or for another sources.list entry not using mirror (Users have also the option to have the mirror list locally (via e.g. mirror+file://) instead of on a remote host). If the user isn't using mirror:// for this InRelease file apt will fail very visibly as intended. (The mirror list needs to include at least two mirrors and to work reliably the attacker needs to be able to MITM all mirrors in the list. For remotely accessed mirror lists this is no limitation as the attacker is in full control of the file in that case) Fixed by clearing the alternatives after a step completes (and moving a pimpl class further to the top to make that valid compilable code). mirror:// is at the moment the only method using this code infrastructure (for all others this set is already empty) and the only method-independent user so far is the download of deb files, but those are downloaded and verified in a single step; so there shouldn't be much opportunity for regression here even through a central code area is changed. Upgrade instructions: Given all apt-based frontends are affected, even additional restrictions like signed-by are bypassed and the attack in progress is hardly visible in the progress reporting of an update operation (the InRelease file is marked "Ign", but no fallback to "Release/Release.gpg" is happening) and leaves no trace (expect files downloaded from the attackers repository of course) the best course of action might be to change the sources.list to not use the mirror family of transports ({tor+,…}mirror{,+{http{,s},file,…}}) until a fixed version of the src:apt packages are installed. Regression-Of: 355e1aceac1dd05c4c7daf3420b09bd860fd169d, 57fa854e4cdb060e87ca265abd5a83364f9fa681 LP: #1787752
2018-08-20Update symbolsJulian Andres Klode
2018-08-19Report (soon) worthless keys if gpg uses fpr for GOODSIGDavid Kalnischkies
gpgs DETAILS documentation file declares that GOODSIG could report keyid or fingerprint since gpg2, but for the time being it is still keyid only. Who knows if that will ever change as that feels like an interface break with dangerous security implications, but lets be better safe than sorry especially as the code dealing with signed-by keyids is prepared for this already. This code is rewritten still to have them all use the same code for this type of problem.
2018-08-19test: Supports records larger than 32kb in 'apt show'David Kalnischkies
The 1.7 series rework of show started in bf53f39c9a0221b670ffff74053ed36fc502d5a0 resolved the issue already, but its always a good idea to at least bring the tests along so that we hopeful do not regress in the future with another rewrite. Tests: #905527 Gbp-Dch: Ignore
2018-08-19Simplified Chinese program translation updateBoyuan Yang
Reviewed-by: Mo Zhou <cdluminate@gmail.com> Closes: #903695
2018-08-19aptwebserver: Prefetch compressors to avoid thread crashesDavid Kalnischkies
If multiple threads act on requests (like if connection comes from a webbrowser) a thread might request the supported compressors while another thread is still working on creating the list to be stored in the static cache variable. As the price to pay for atomic and co seems to high for the fringe usecase of manual usage of aptwebserver the patch just makes a call to generate the list while still single threaded. Gbp-Dch: Ignore
2018-08-14CMake: Use ${PROJECT_NAME} instead of hardcoding aptDavid Kalnischkies
Completely pointless as it makes no difference for apt, but copying the file to other projects becomes a lot easier. Gbp-Dch: Ignore