summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-03-27Merge remote-tracking branch 'upstream/debian/sid' into debian/sidMichael Vogt
2014-03-27Use mkstemp() in apt-extracttemplaes (closes: #741627)Michael Vogt
Use mkstemp() in apt-extractemplates and add a integrationtest for apt-extracttemplates too. Thanks to Steve Kemp for the report.
2014-03-27fix documentation for APT::Periodic::MaxSize "0" (closes: #740551)Michael Vogt
2014-03-23discard candidates via IsInstallOk to allow overrideDavid Kalnischkies
In commit 446551c8 I changed MarkInstall to discard the candidate if the candidate can't satisfy the dependency. This breaks interactive solvers like aptitude which can change the candidate on-the-fly later. In commit df77d8a5 I introduced this 'early' loop-breaking to begin with which can't be that helpful for interactive solvers as well, but makes perfect sense for non-interactives to stop them from exploring trees which can't be satisfied, but it isn't perfect as ideally we would check this before auto-installing the first dependency. This commit therefore moves the loop into its own IsInstallOk hook so that frontends can override this check if they want to and in exchange removes the loop-breaking from MarkInstall itself and does it before any dependency is installed. Closes: 740750
2014-03-23do IsInstallOk call in MarkInstall unconditionallyDavid Kalnischkies
Hooked checks could be influenced by AutoInst as a lot can happen between a call without and one with this bit set. The real cache-hit check is above this call already. Individual hooked checks can then inspect the state if they want to cache. Calling them multiple times shouldn't be a problem either way.
2014-03-23update symbols file to include new symbols from 0.9.16David Kalnischkies
2014-03-22ensure proper teardown in dpkg error casesDavid Kalnischkies
We have to properly close our pseudo terminals even in error cases before we call post-invoke scripts. This is done now by breaking from the dpkg calling loop instead of copying the handling, which did it in the wrong order before. This also ensures that our state file is written in error cases to record autobit and co as this was forgotten before. Closes: 738969
2014-03-21mark optional (private) symbols as hiddenDavid Kalnischkies
This methods should not be used by anyone expect the library itself as they are helpers for the specific class and therefore perfect candidates for hidding. Git-Dch: Ignore
2014-03-21enable fvisibility=hidden for our private libraryDavid Kalnischkies
While it is a huge undertaking to enable it for our public libraries as basically everything we exported so far could be seen as public interface our private library is new and under our full control, so we can do whatever we like with it. The benefits are not that big in return of course, but it reduces the size a bit, so thats great nontheless. Git-Dch: ignore
2014-03-21add testcase for APT::Architectures "arch1,arch2"David Kalnischkies
Git-Dch: Ignore
2014-03-21Japanese programs translation updateKenshi Muto
Closes: 742255
2014-03-21correct some reported typos in /etc/cron.daily/aptDavid Kalnischkies
Closes: 702016 Reported-By: Mason Loring Bliss <mason@blisses.org>, Jakub Wilk <jwilk@debian.org>
2014-03-21Italian manpages translation updateBeatrice Torracca
Closes: 741867
2014-03-21only consider versioned kernel packages in autoremoveDavid Kalnischkies
Metapackages like "linux-image-amd64" are otherwise matched by our extraction as well, which later on can't be successfully compared via dpkg --compare-versions as the 'amd64' bit isn't a version number. (Luckily none of our architectures starts with a digit.) This was broken by me in 0.9.16 as I moved a shell-glob matcher to a regex-based one which has slightly different semantics regarding '*'. Closes: 741962
2014-03-21continue reading in xz even if it outputs nothingDavid Kalnischkies
It can happen that content in our buffer is not enough to produce a meaningful output in which case no output is created by liblzma, but still reports that everything is okay and we should go on. The code assumes it has reached the end through if it encounters a null read, so this commit makes it so that it looks like this read was interrupted just like the lowlevel read() on uncompressed files could. It subsequently fixes the issue with that as well as until now our loop would still break even if we wanted it to continue on. (This bug triggers our usual "Hash sum mismatch" error) Reported-By: Stefan Lippers-Hollmann <s.L-H@gmx.de>
2014-03-17apt-inst: Do not try to create a substring of an empty string in error reportingJulian Andres Klode
One of our compressors (the empty one) has an empty extension. Calling substr on it fails.
2014-03-15Release 0.9.16.10.9.16.1Julian Andres Klode
2014-03-15Fix handling of autoclosing for compressed files (Closes: #741685)Julian Andres Klode
AutoClose is both an argument in OpenDescriptor() and an enum. In commit 84baaae93badc2da7c1f4f356456762895cef278 code using the AutoClose parameter was moved to OpenDescriptorInternal(). In that function, AutoClose meant the enum value, so the check was always false.
2014-03-15Updated German doc translationChris Leick
2014-03-14prepare 0.9.16 release0.9.16Michael Vogt
2014-03-14add debian/apt.install to gitignoreMichael Vogt
2014-03-14fix test/integration/test-apt-helperMichael Vogt
2014-03-13Merge branch 'debian/sid' of ssh://git.debian.org/git/apt/apt into debian/sidMichael Vogt
2014-03-13use the pretty fullname of a pkg as download desciptionDavid Kalnischkies
Otherwise the "WARNING: The following packages cannot be authenticated!" messages does not include the architecture of the package, so it would be slightly misinformative.
2014-03-13refactor FileFd to hide some #ifdefsDavid Kalnischkies
They tend to be ugly to look at, so hide them. Git-Dch: Ignore
2014-03-13use liblzma-dev to provide xz/lzma supportDavid Kalnischkies
We have xz/lzma support for a while, but only via an external binary provided by xz-utils. Now that the Debian archive provides xz by default and dpkg pre-depends on the library provided by liblzma-dev we can switch now to use this library as well to avoid requiring an external binary. For now the binary is in a prio:required package, but this might change in the future. API wise it is quiet similar to bz2 code expect that it doesn't provide file I/O methods, so we piece this together on our own.
2014-03-13add a config option to switch uncompress methods to compressDavid Kalnischkies
Not very useful in the normal operation of work, but handy for tests. Git-Dch: Ignore
2014-03-13ensure that gz compression test is run with gzDavid Kalnischkies
The framework can be configured to use different compression algorithms to test different ones, but a testcase testing for gz support should always be run with gz, regardless of what compressions are configured otherwise. Git-Dch: Ignore
2014-03-13factor out getting list of architectures from comma listDavid Kalnischkies
Beside fixing this minor code duplication it also resolves the problem of messing up vim syntax-highlighting. Git-Dch: Ignore
2014-03-13refactor setup of file opening via zlib/bz2 libDavid Kalnischkies
Git-Dch: Ignore
2014-03-13move fd duplication closer to the gz/bz2 open callsDavid Kalnischkies
Git-Dch: Ignore
2014-03-13abstract version hash comparison a bitDavid Kalnischkies
In #737085 we see that apt can be confused if informations about versions only differ slightly. This commit adds a way of at least adding a few more data points with the next abi break to help a bit with it. Git-Dch: Ignore
2014-03-13factor out parsing of MultiArch flagDavid Kalnischkies
Git-Dch: Ignore
2014-03-13correct LD_LIBRARY_PATH and config loading for apt-helperDavid Kalnischkies
Mostly ensures that we use the build methods and not the system provided methods in the tests (if we don't want it that way). Git-Dch: Ignore
2014-03-13ensure that a dot is a dot in the hookDavid Kalnischkies
As we deal with regex matchers here the dots are treated as wildcards if we don't take care of escaping them. Not very likely that this could be a real-world problem, but just to be sure.
2014-03-13add ".*-{kernel,modules}-$KERVER" matcher for hookDavid Kalnischkies
Pre-build kernel modules (like those build with module-assistent) are commonly named in this way and it should be ungeneric enough to be added by default for everyone.
2014-03-13support kfreebsd and hurd in the kernel hookDavid Kalnischkies
kfreebsd as well as hurd kernel packages call the postinst script as well so we just need to enable the correct parsing for installed packages and disable the "protect every version" hammer for them.
2014-03-13use a configurable list of versioned kernel packagesDavid Kalnischkies
With APT::VersionedKernelPackages users have the option of adding packages like pre-build out-of-tree modules to the list of automatically protected from being autoremoved.
2014-03-13cmdline parsing: apt-config is not apt-cdromDavid Kalnischkies
2014-03-13improve debug output in case downloadfile failsDavid Kalnischkies
Git-Dch: Ignore
2014-03-13msgstr with elipses need three dotsDavid Kalnischkies
fixes some messages and their translation so that all of them have three dots for messages with an elipse. Many translations already had this.
2014-03-13fix polish --install-suggests text in apt-get manpageWojciech Górski
Description of the --install-suggests option is wrong in the polish apt-get man page. The actual meaning of this option is the opposite to what is written in the manual. Closes: 741056
2014-03-13support very long mtab entries in mountpoint discoveryDavid Kalnischkies
Old code limited lines to 250 characters which is probably enough for everybody, but who knows… It also takes care of device nodes which start with the same prefix.
2014-03-13enable mount support for apt-cdrom in the testsDavid Kalnischkies
Git-Dch: Ignore
2014-03-13remove code duplication for Add & Ident in apt-cdromDavid Kalnischkies
The preparation code to deal with auto-detection and co is the same for both methods, so not sharing them would be bad. Deals also with the prevention of side effects triggered by the auto-detection like disabling mounting for the fallback. Git-Dch: Ignore
2014-03-13apt-cdrom ident shouldn't be interactiveDavid Kalnischkies
Commit 62dcbf84 changed the code of ident to look more like the code for add on my suggestion. This made ident interactive as it starts with a unmount, press enter, mount cycle. The first two are skipped now. This fixes d-i/apt-setup which is using it to get ID as well as label. Closes: 740673
2014-03-13no error for non-existing mountpoints in MountCdromDavid Kalnischkies
The mountpoint might be auto-generated by the mount command so pushing an error on the stack will confuse the following code and let it believe an unrecoverable error occured while potentially everything is okay. Same goes for umount as a non-existing mountpoint is by definition not mounted.
2014-03-13if mountpoint has a ".disk" directory it is mountedDavid Kalnischkies
Checking that parent-directory of mountpoint and mountpoint are on different devices is fine most of the time, but is too restrictive for our testcases and there shouldn't be anything wrong with 'normal' users copying disk-contents around either if they want to. We check for the existance of the ".disk/" directory now as this will not be present if the disk isn't 'mounted'. Disks doesn't need to have such a directory through, so for those we fall back to the old way of detecting mounted or not mounted.
2014-03-13simplify apt-cdrom testcodeDavid Kalnischkies
Git-Dch: Ignore
2014-03-13do not configure already unpacked packages needlesslyDavid Kalnischkies
The unpack of a M-A:same package will force the unpack of all its siblings directly to prevent that they could be separated by later immediate actions. In commit 634985f8 a call to SmartConfigure was introduced to configure these packages at the time the installation order encounters them. Usually, the unpack order is already okay, so that this 'earlier' unpack was not needed and if it wouldn't have been done, the package would now only be unpacked, but by configuring the package now we impose new requirements which must be satisfied. The code is clever enough to handle this most of the time (it worked for 2 years!), but it isn't needed and in very coupled cases this can fail. Removing this call again removes this extra burden and so simplifies the ordering as can be seen in the modified tests. Famous last words, but I don't see a reason for this extra burden to exist hence the remove. Closes: 740843