summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-18Introduce APT::Install::Pre-Invoke / Post-Invoke-SuccessJulian Andres Klode
These will run in our frontends currently, and can show messages. For the sake of keeping the implementation complexity low, a non-success variant of Post-Invoke is not provided. LP: #1815761 (cherry picked from commit 3f3cad74c2abbe3837fa98030c703dd4f5f191dc)
2019-02-18update: Provide APT::Update-Post-Invoke-Stats script hook pointJulian Andres Klode
This is run after an update has been run and only if status on the new cache has been shown, allowing scripts to display their own status messages. LP: #1815760 (cherry picked from commit fc3834a9e0d850411b7ae92e7b15a09f0a299b99)
2019-02-13doc: Set ubuntu-codename to cosmicJulian Andres Klode
LP: #1812696
2019-02-05Add a Packages-Require-Authorization Release file fieldJulian Andres Klode
This new field allows a repository to declare that access to packages requires authorization. The current implementation will set the pin to -32768 if no authorization has been provided in the auth.conf(.d) files. This implementation is suboptimal in two aspects: (1) A repository should behave more like NotSource repositories (2) We only have the host name for the repository, we cannot use paths yet. - We can fix those after an ABI break. The code also adds a check to acquire-item.cc to not use the specified repository as a download source, mimicking NotSource. (cherry picked from commit c2b9b0489538fed4770515bd8853a960b13a2618) LP: #1814727
2019-02-05Introduce experimental 'never' pinning for sourcesJulian Andres Klode
This allows disabling a repository by pinning it to 'never', which is internally translated to a value of -32768 (or whatever the minimum of short is). This overrides any other pin for that repository. It can be used to make sure certain sources are never used; for example, in unattended-upgrades. To prevent semantic changes to existing files, we substitute min + 1 for every pin-priority: <min>. This is a temporary solution, as we are waiting for an ABI break. To add pins with that value, the special Pin-Priority "never" may be used for now. It's unclear if that will persist, or if the interface will change eventually. (cherry picked from commit 8bb2a91a070170d7d8e71206d1c66a26809bdbc3) LP: #1814727
2019-02-05private-json-hooks.cc: deal with EPIPEMichael Vogt
While running our CI we noticed that sometimes we see an error from the new json hooks code. The error message is: ``` E: Could not read response to hello message from hook [ ! -f /usr/bin/snap ] || /usr/bin/snap advise-snap --from-apt 2>/dev/null || true: Broken pipe ``` when purging the snapd package which provides the hook. This indicates that we should probably also consider EPIPE not an error (just like we do for ECONNRESET). This PR does exactly this. (cherry picked from commit 6af48a7f83540c807be1d2777470d23e6b260eb8) LP: #1814543
2019-01-25Release 1.7.21.7.2Julian Andres Klode
2019-01-25SECURITY UPDATE: content injection in http method (CVE-2019-3462)Julian Andres Klode
This fixes a security issue that can be exploited to inject arbritrary debs or other files into a signed repository as followed: (1) Server sends a redirect to somewhere%0a<headers for the apt method> (where %0a is \n encoded) (2) apt method decodes the redirect (because the method encodes the URLs before sending them out), writting something like somewhere\n <headers> into its output (3) apt then uses the headers injected for validation purposes. Regression-Of: c34ea12ad509cb34c954ed574a301c3cbede55ec LP: #1812353
2019-01-14Release 1.7.11.7.1Julian Andres Klode
2019-01-14debian/gbp.conf: Point to 1.7.y branchJulian Andres Klode
2019-01-14Merge translations from 1.8 seriesJulian Andres Klode
2019-01-14Do CI using ubuntu:cosmic, not debian:testingJulian Andres Klode
This is the cosmic branch.
2019-01-14NeverAutoRemove kernel meta packagesJulian Andres Klode
This gives more protection for people where kernel metapackages are accidentally removed. LP: #1787460 (cherry picked from commit a4b0ce5a4f5068f780b3aa94473230b5093a837d)
2019-01-14Add support for /etc/apt/auth.conf.d/*.conf (netrcparts)Julian Andres Klode
This allows us to install matching auth files for sources.list.d files, for example; very useful. This converts aptmethod's authfd from one FileFd to a vector of pointers to FileFd, as FileFd cannot be copied, and move operators are hard. (cherry picked from commit bbfcc05c1978decd28df9681fd73e2a7d9a8c2a5) LP: #1811120
2018-10-07Release 1.7.01.7.0Julian Andres Klode
2018-10-07prepare-release: Fix last-modification detection for manpagesJulian Andres Klode
Pass -i to git log, so "Release foo" is detected as well, not just "release foo", and also handle the rename of Git-Dch to Gbp-Dch.
2018-10-05Set DPKG_FRONTEND_LOCKED when running {pre,post}-invoke scriptsJulian Andres Klode
Some post-invoke scripts install packages, which fails because the environment variable is not set. This sets the variable for all three kinds of scripts {pre,post-}invoke and pre-install-pkgs, but we will only allow post-invoke at a later time. Gbp-Dch: full
2018-10-02apt-mark: showhold: typo-fix (package -> packages)Muhamed Huseinbašić
See merge request apt-team/apt!29 [jak@d.o: Also adjust translations, provide better subject]
2018-09-27Show APT::Compressor example in apt.conf(5)David Kalnischkies
Including a block-element like informalexample in a para is legal, but the documentation of the para tag hints that some processing systems may have difficulties handling this – so lets just move it out of the block and be happy as it is (again?) displayed. Closes: #909712
2018-09-24pkgCacheFile: Only unlock in destructor if locked beforeJulian Andres Klode
pkgCacheFile's destructor unlocks the system, which is confusing if you did not open the cachefile with WithLock set. Create a private data instance that holds the value of WithLock. This regression was introduced in commit b2e465d6d32d2dc884f58b94acb7e35f671a87fe: Join with aliencode Author: jgg Date: 2001-02-20 07:03:16 GMT Join with aliencode by replacing a "Lock" member that was only initialized when the lock was taken by calls to Lock, UnLock; with the latter also taking place if the former did not occur. Regression-Of: b2e465d6d32d2dc884f58b94acb7e35f671a87fe LP: #1794053
2018-09-24Fix calculation of elapsed usec in downloadsJulian Andres Klode
A recent change to use chronos inadvertently replaced the difference of new usec - old usec with new sec - old usec, which is obviously wrong.
2018-09-20Release 1.7.0~rc21.7.0_rc2Julian Andres Klode
2018-09-20Deal with descriptions embedded in displayed record correctlyDavid Kalnischkies
The implementation of "apt-cache show" (not "apt show") incorrectly resets the currently used parser if the record itself and the description to show come from the same file (as it is the case if no Translation-* files are available e.g. after debootstrap). The code is more complex than you would hope to support some rather unusual setups involving Descriptions and their translations as tested for by ./test-bug-712435-missing-descriptions as otherwise this could be a one-line change. Regression-Of: bf53f39c9a0221b670ffff74053ed36fc502d5a0 Closes: #909155
2018-09-18Release 1.7.0~rc1 to unstable1.7.0_rc1Julian Andres Klode
2018-09-18Merge branch 'pu/keep-pipelining-after-close' into 'master'Julian Andres Klode
http: Stop pipeline after close only if it was not filled before See merge request apt-team/apt!25
2018-09-18http: Stop pipeline after close only if it was not filled beforeJulian Andres Klode
It is perfectly valid behavior for a server to respond with Connection: close eventually, even when pipelining. Turning off pipelining due to that is wrong. For example, some Ubuntu mirrors close the connection after 101 requests. If I have more packages to install, only the first 101 would benefit from pipelining. This commit introduces a new check to only turn of pipelining for future connections if the pipeline for this connection did not have 3 successful fetches before, that should work quite well to detect broken server/proxy combinations like in bug 832113.
2018-09-18Merge branch 'bugfix/statusfd' into 'master'Julian Andres Klode
Process all of --status-fd and don't expect duplicate status msg See merge request apt-team/apt!26
2018-09-15Show all architectures in 'apt list' outputDavid Kalnischkies
The uniqueness in std::set containers is ensured by the ordering operator we provide, but it was not considering that different versions can have the same description like the different architectures for a version of a package. Closes: #908218
2018-09-11Reorder progress report messagesDavid Kalnischkies
We are seeing 'processing' messages from dpkg first, so it makes sense to translate them to "Preparing" messages instead of using "Installing" and co to override these shortly after with the "Preparing" messages. The difference isn't all to visible as later messages tend to linger far longer in the display than the ealier ones, but at least in a listing it seems more logical.
2018-09-11Don't expect duplicated dpkg status-fd messagesDavid Kalnischkies
The progress reporting relies on parsing the status reports of dpkg which used to repeat being in the same state multiple times in the same run, but by fixing #365921 it will stop doing so. The problem is in theory just with 'config-files' in case we do purge as this (can) do remove + purge in one step, but we remove this also for the unpack + configure combination althrough we handle these currently in two independent dpkg calls.
2018-09-11Process status-fd completely before finishing dpkg callDavid Kalnischkies
Exiting the processing loop as soon as the dpkg process finishes might leave status-fd lines unprocessed which wasn't much of a problem in the past as the progress would just be slightly off, but now that we us the information also for skipping already done tasks and generate warnings if we didn't see all expected messages we should make sure we seem them all. We still need to exit "early" if dpkg exited unsuccessfully/crashed through as the (remaining) status lines we get could be incomplete.
2018-09-11Unset more environment variables in test frameworkDavid Kalnischkies
It is an uphill battle to "reset" the environment to a clean state without making it needlessly hard to use 'good' environment variables, so we just try a little harder here without really trying for completeness. Gbp-Dch: Ignore
2018-09-10Don't use gpg directly in apt-key testDavid Kalnischkies
Reported-By: Guillem Jover <guillem@debian.org> Gbp-Dch: Ignore
2018-08-29Fix typos reported by codespell & spellintianDavid Kalnischkies
No user-visible change as it effects mostly code comments and not a single error message, manpage or similar. Reported-By: codespell & spellintian Gbp-Dch: Ignore
2018-08-29Don't use invalid iterator in Fallback-Of handlingDavid Kalnischkies
cppcheck reports: (error) Iterator 't' used after element has been erased. The loop is actually fashioned to deal with this (not in the most efficient way, but in simplest and speed isn't really a concern here) IF this codepath had a "break" at the end… so I added one. Note that the tests aren't failing before (and hopefully after) the change as the undefined behavior we encounter is too stable. Thanks: David Binderman for reporting
2018-08-28fr.po: Do not translate the apt-ftparchive commandsLaurent Bigonville
Closes: #907481
2018-08-20Release 1.7.0~alpha31.7.0_alpha3Julian Andres Klode
2018-08-20clear alternative URIs for mirror:// between steps (CVE-2018-0501)David Kalnischkies
APT in 1.6 saw me rewriting the mirror:// transport method, which works comparable to the decommissioned httpredir.d.o "just" that apt requests a mirror list and performs all the redirections internally with all the bells like parallel download and automatic fallback (more details in the apt-transport-mirror manpage included in the 1.6 release). The automatic fallback is the problem here: The intend is that if a file fails to be downloaded (e.g. because the mirror is offline, broken, out-of-sync, …) instead of erroring out the next mirror in the list is contacted for a retry of the download. Internally the acquire process of an InRelease file (works with the Release/Release.gpg pair, too) happens in steps: 1) download file and 2) verify file, both handled as URL requests passed around. Due to an oversight the fallbacks for the first step are still active for the second step, so that the successful download from another mirror stands in for the failed verification… *facepalm* Note that the attacker can not judge by the request arriving for the InRelease file if the user is using the mirror method or not. If entire traffic is observed Eve might be able to observe the request for a mirror list, but that might or might not be telling if following requests for InRelease files will be based on that list or for another sources.list entry not using mirror (Users have also the option to have the mirror list locally (via e.g. mirror+file://) instead of on a remote host). If the user isn't using mirror:// for this InRelease file apt will fail very visibly as intended. (The mirror list needs to include at least two mirrors and to work reliably the attacker needs to be able to MITM all mirrors in the list. For remotely accessed mirror lists this is no limitation as the attacker is in full control of the file in that case) Fixed by clearing the alternatives after a step completes (and moving a pimpl class further to the top to make that valid compilable code). mirror:// is at the moment the only method using this code infrastructure (for all others this set is already empty) and the only method-independent user so far is the download of deb files, but those are downloaded and verified in a single step; so there shouldn't be much opportunity for regression here even through a central code area is changed. Upgrade instructions: Given all apt-based frontends are affected, even additional restrictions like signed-by are bypassed and the attack in progress is hardly visible in the progress reporting of an update operation (the InRelease file is marked "Ign", but no fallback to "Release/Release.gpg" is happening) and leaves no trace (expect files downloaded from the attackers repository of course) the best course of action might be to change the sources.list to not use the mirror family of transports ({tor+,…}mirror{,+{http{,s},file,…}}) until a fixed version of the src:apt packages are installed. Regression-Of: 355e1aceac1dd05c4c7daf3420b09bd860fd169d, 57fa854e4cdb060e87ca265abd5a83364f9fa681 LP: #1787752
2018-08-20Update symbolsJulian Andres Klode
2018-08-19Report (soon) worthless keys if gpg uses fpr for GOODSIGDavid Kalnischkies
gpgs DETAILS documentation file declares that GOODSIG could report keyid or fingerprint since gpg2, but for the time being it is still keyid only. Who knows if that will ever change as that feels like an interface break with dangerous security implications, but lets be better safe than sorry especially as the code dealing with signed-by keyids is prepared for this already. This code is rewritten still to have them all use the same code for this type of problem.
2018-08-19test: Supports records larger than 32kb in 'apt show'David Kalnischkies
The 1.7 series rework of show started in bf53f39c9a0221b670ffff74053ed36fc502d5a0 resolved the issue already, but its always a good idea to at least bring the tests along so that we hopeful do not regress in the future with another rewrite. Tests: #905527 Gbp-Dch: Ignore
2018-08-19Simplified Chinese program translation updateBoyuan Yang
Reviewed-by: Mo Zhou <cdluminate@gmail.com> Closes: #903695
2018-08-19aptwebserver: Prefetch compressors to avoid thread crashesDavid Kalnischkies
If multiple threads act on requests (like if connection comes from a webbrowser) a thread might request the supported compressors while another thread is still working on creating the list to be stored in the static cache variable. As the price to pay for atomic and co seems to high for the fringe usecase of manual usage of aptwebserver the patch just makes a call to generate the list while still single threaded. Gbp-Dch: Ignore
2018-08-14CMake: Use ${PROJECT_NAME} instead of hardcoding aptDavid Kalnischkies
Completely pointless as it makes no difference for apt, but copying the file to other projects becomes a lot easier. Gbp-Dch: Ignore
2018-08-08Set DPKG_FRONTEND_LOCKED as needed when doing selection changesJulian Andres Klode
We forgot to set the variable for the selection changes. Let's set it for that and some other dpkg calls. Regression-Of: c2c8b4787b0882234ba2772ec7513afbf97b563a
2018-08-07Merge branch 'bugfix/big-lock' into 'master'Julian Andres Klode
Add support for dpkg frontend lock See merge request apt-team/apt!11
2018-08-07Add support for dpkg frontend lockJulian Andres Klode
The dpkg frontend lock is a lock dpkg tries to acquire except if the frontend already acquires it. This fixes a race condition in the install command where the dpkg lock is not held for a short period of time between different dpkg invocations. For this reason we also define an environment variable DPKG_FRONTEND_LOCKED for dpkg invocations so dpkg knows not to try to acquire the frontend lock because it's held by a parent process. We can set DPKG_FRONTEND_LOCKED only if the frontend lock really is held; that is, if our lock count is greater than 0 - otherwise an apt client not using the LockInner family of functions would run dpkg without the frontend lock set, but with DPKG_FRONTEND_LOCKED set. Such a process has a weaker guarantee: Because dpkg would not lock the frontend lock either, the process is prone to the existing races, and, more importantly, so is a new style process. Closes: #869546 [fixups: fix error messages, add public IsLocked() method, and make {Un,}LockInner return an error on !debSystem]
2018-08-07Merge branch 'master' into 'master'Julian Andres Klode
Add trailing newline to output of edit-sources. See merge request apt-team/apt!22
2018-07-09Release 1.7.0~alpha21.7.0_alpha2Julian Andres Klode
2018-07-06Use cheaper entropy source for randomizing items to fetchJulian Andres Klode
The random_device fails if not enough entropy is available. We do not need high-quality entropy here, though, so let's switch to a seed based on the current time in nanoseconds, XORed with the PID.