summaryrefslogtreecommitdiff
path: root/apt-pkg/contrib/fileutl.cc
AgeCommit message (Collapse)Author
2015-12-27FileFd: Add a buffered writing modeJulian Andres Klode
This is somewhat experimental right now, and might not work for everyone, so it is on an opt-in basis.
2015-12-27FildFd: Introduce a Flush() function and call it from Close()Julian Andres Klode
The flush function can be used for buffered writers.
2015-12-27FileFdPrivate: Add getter and setter for fieldsJulian Andres Klode
We will soon implement a buffered writing decorator and we will need to forward attribute changes to those.
2015-12-27fileutl: simple_buffer: Add write() and full() methodsJulian Andres Klode
These can be used to implement write buffering Gbp-Dch: ignore
2015-12-27fileutl: simple_buffer: Mark accessors as constJulian Andres Klode
Suggested by David. Gbp-Dch: ignore
2015-12-27FileFdPrivate: Extract SimpleBuffer and mark it as hiddenJulian Andres Klode
Gbp-Dch: ignore
2015-12-26Refactor InternalReadLine to not unroll Size == 0 caseJulian Andres Klode
There is not much point and this is more readable. Gbp-Dch: ignore
2015-12-26Change InternalReadLine to always use buffer.read() return valueJulian Andres Klode
This is mostly a documentation issue, as the size we want to read is always less than or equal to the size of the buffer, so the return value will be the same as the size argument. Nonetheless, people wondered about it, and it seems clearer to just always use the return value.
2015-12-26Get rid of memmove() in our read bufferingJulian Andres Klode
This further improves our performance, and rred on uncompressed files now spents 78% of its time in writing. Which means that we should really look at buffering those.
2015-12-26Use a hardcoded buffer size of 4096 to fix performanceJulian Andres Klode
The code uses memmove() to move parts of the buffer to the front when the buffer is only partially read. By simply reading one page at a time, the maximum size of bytes that must be moved has a hard limit, and performance improves: In one test case, consisting of a 430 MB Contents file, and a 75K PDiff, applying the PDiff previously took about 48 seconds and now completes in 2 seconds. Further speed up can be achieved by buffering writes, they account for about 60% of the run-time now.
2015-12-24Mark all FileFdPrivate classes as hidden1.1.6Julian Andres Klode
Gbp-Dch: ignore
2015-12-23fix new[] vs delete mismatch introduced by b3db9d81David Kalnischkies
And as we are at it lets fix the 'style' issue I introduced with the filefd changes as well. Reported-By: gcc -fsanitize's & cppcheck Git-Dch: Ignore
2015-12-23use a dynamic buffer for ReadLineDavid Kalnischkies
We don't need the buffer that often - only for ReadLine - as it is only occasionally used, so it is actually more efficient to allocate it if needed instead of statically by default. It also allows the caller to influence the buffer size instead of hardcoding it. Git-Dch: Ignore
2015-12-23implement a buffer system for FileFd::ReadLineDavid Kalnischkies
The default implementation of ReadLine was very naive by just reading each character one-by-one. That is kinda okay for libraries implementing compression as they have internal buffers (but still not great), but while working with files directly or via a pipe as there is no buffer there so all those reads are in fact system calls. This commit introduces an internal buffer in the FileFd implementation which is only used by ReadLine. The more low-level Read and all other actions remain unbuffered – they just changed to deal with potential "left-overs" in the buffer correctly. Closes: 808579
2015-12-22parse xz-compression level from configurationDavid Kalnischkies
If we use the library to compress xz, still try to understand and pick up the arguments we would have used to call xz to figure out which level the user wants us to use instead of defaulting to level 6 (which is the default level of xz).
2015-12-22follow dpkg and xz and use CRC64 for xz compressionDavid Kalnischkies
dpkg switched from CRC32 to CRC64 in 777915108d9d36d022dc4fc4151a615fc95e5032 with the message: | This is the default CRC used by the xz command-line tool, align with | it and switch from CRC32 to CRC64. It should provide slightly better | detection against damaged data, at a negligible speed difference.
2015-12-22shuffle compressor-specific code into private subclassesDavid Kalnischkies
This isn't implementing any new features, it is "just" moving code around from FileFd methods which decided on each call how to handle the request by including all logic for all possible compressor backends in the method body to a model in which backend-specifics are implemented in a FileFdPrivate subclass. This avoids a big chunk of #ifdef's and should make it a tiny bit more obvious which backend uses which code. The execution of the idea is slightly uglified by the need to preserve ABI and API which causes liberal befriending. Git-Dch: Ignore
2015-12-19Do not try to read in FileFd::Read() if Size is 0Julian Andres Klode
There's no point trying to read 0 bytes, so let's just not do this and switch to a while loop like in Write(). Gbp-Dch: ignore
2015-12-19Do nothing in FileFd::Write() if Size is 0Julian Andres Klode
Turn the do-while loop into while loops, so it simply does nothing if the Size is already 0. This reverts commit c0b271edc2f6d9e5dea5ac82fbc911f0e3adfa7a which introduced a fix for a specific instance of the issue in the CopyFile() function. Closes: #808381
2015-12-19CopyFile: avoid failing on EOF on some systemsPino Toscano
On EOF, ToRead will be 0, which might trigger on some systems (e.g. on the Hurd) an error due to the invalid byte count passed to write(). The whole loop already checks for ToRead != 0, so perform the writing step only when there was actual data read. Closes: #808381
2015-12-19CopyFile: fix BufSize to a sane valuePino Toscano
Commit e977b8b9234ac5db32f2f0ad7e183139b988340d tries to make BufSize calculated based on the size of the buffer; the problem is that std::unique_ptr::size() returns a pointer to the data, so sizeof() equals to the size of a pointer (later divided by sizeof(char), which is 1). The result is that the CopyFile copies in chunks of 8 bytes, which is not exactly ideal... As solution, declare BufSize in advance, and use its value to allocate the Buf array. Closes: #808381
2015-11-28disable privilege-drop verification by default as fakeroot trips over itDavid Kalnischkies
Dropping privileges is an involved process for code and system alike so ideally we want to verify that all the work wasn't in vain. Stuff designed to sidestep the usual privilege checks like fakeroot (and its many alternatives) have their problem with this through, partly through missing wrapping (#806521), partly as e.g. regaining root from an unprivileged user is in their design. This commit therefore disables most of these checks by default so that apt runs fine again in a fakeroot environment. Closes: 806475
2015-11-28show the group we failed to drop via setgroupsDavid Kalnischkies
This also deals with the unlikely case of groups being mentioned multiple times or if the effective group isn't mentioned at all. In practice, it is a debugging aid through like for #806475. Git-Dch: Ignore
2015-11-27add messages to our deprecation warnings in libaptDavid Kalnischkies
Git-Dch: Ignore
2015-11-19do not use _apt for file/copy sources if it isn't world-accessibleDavid Kalnischkies
In 0940230d we started dropping privileges for file (and a bit later for copy, too) with the intend of uniforming this for all methods. The commit message says that the source will likely fail based on the compressors already – and there isn't much secret in the repository content. After all, after apt has run the update everyone can access the content via apt anyway… There are sources through which worked before which are mostly single-deb (and those with the uncompressed files available). The first one being especially surprising for users maybe, so instead of failing, we make it so that apt detects that it can't access a source as _apt and if so doesn't drop (for all sources!) privileges – but we limit this to file/copy, so the uncompress which might be needed will still fail – but that failed before this regression. We display a notice about this, mostly so that if it still fails (e.g. compressed) the user has some idea what is wrong. Closes: 805069
2015-11-04wrap every unlink call to check for != /dev/nullDavid Kalnischkies
Unlinking /dev/null is bad, we shouldn't do that. Also, we should print at least a warning if we tried to unlink a file but didn't manage to pull it of (ignoring the case were the file is /dev/null or doesn't exist in the first place). This got triggered by a relatively unlikely to cause problem in pkgAcquire::Worker::PrepareFiles which would while temporary uncompressed files (which are set to keep compressed) figure out that to files are the same and prepare for sharing by deleting them. Bad move. That also shows why not printing a warning is a bad idea as this hide the error for in non-root test runs. Git-Dch: Ignore
2015-11-04ensure FileFd doesn't try to open /dev/null as atomic and coDavid Kalnischkies
The wrapping will fail in the best case and actually end up deleting /dev/null in the worst case. Given that there is no point in trying to write atomically to /dev/null as you can't read from it again just ignore these flags if higher level code ends up trying to use them on /dev/null. Git-Dch: Ignore
2015-09-14avoid using global PendingError to avoid failing too often too soonDavid Kalnischkies
Our error reporting is historically grown into some kind of mess. A while ago I implemented stacking for the global error which is used in this commit now to wrap calls to functions which do not report (all) errors via return, so that only failures in those calls cause a failure to propergate down the chain rather than failing if anything (potentially totally unrelated) has failed at some point in the past. This way we can avoid stopping the entire acquire process just because a single source produced an error for example. It also means that after the acquire process the cache is generated – even if the acquire process had failures – as we still have the old good data around we can and should generate a cache for (again). There are probably more instances of this hiding, but all these looked like the easiest to work with and fix with reasonable (aka net-positive) effects.
2015-09-14copy ReadWrite-error to the bottom to make clang happyDavid Kalnischkies
clang detects that fd isn't set in the ReadWrite case – just that this is supposed to be catched earlier in this method already, but it doesn't hurt to make it explicit here as well and clang is happy, too. Git-Dch: Ignore
2015-09-14implement CopyFile without using FileFd::Size()David Kalnischkies
Pipes and such have no good Size value, but we still want to copy from it maybe and we don't really need size as we can just as well read as long as we get data out of a file to copy it. Git-Dch: Ignore
2015-09-01improve CheckDropPrivsMustBeDisabled furtherDavid Kalnischkies
Various smaller improvements so that the check deals better with already downloaded files, relative paths and other things. Git-Dch: Ignore
2015-08-31ignore for _apt inaccessible TMPDIR in pkgAcqChangelogDavid Kalnischkies
Using libpam-tmpdir caused us to create our download tmp directory in root's private tmp before changing to _apt, which wouldn't have access to it. By extending our GetTempDir method with an optional wrapper changing the effective user, we can test if a given user can access the directory and ignore TMPDIR if not instead of ignoring TMPDIR completely. Closes: 797270
2015-08-27Always close compressed files in FileFdJulian Andres Klode
We dup() the file descriptor when opening compressed files, so we always need to close the dup()ed one. Furthermore, not unsetting the d-pointer causes issues when running OpenDescriptor() multiple times on the same file descriptor.
2015-08-13Use setresuid() and setresgid() where availableJulian Andres Klode
2015-08-13Deprecate SPtrArray<T> and convert everyone to unique_ptr<T[]>Julian Andres Klode
More standardization
2015-08-11ExecFork: Use /proc/self/fd to determine which files to closeJulian Andres Klode
This significantly reduces the number of files that have to be closed and seems to be faster, despite the additional reads. On systems where /proc/self/fd is not available, we fallback to the old code that closes all file descriptors >= 3. Closes: #764204
2015-08-10elimate duplicated code in pkgIndexFile subclassesDavid Kalnischkies
Trade deduplication of code for a bunch of new virtuals, so it is actually visible how the different indexes behave cleaning up the interface at large in the process. Git-Dch: Ignore
2015-08-10make all d-pointer * const pointersDavid Kalnischkies
Doing this disables the implicit copy assignment operator (among others) which would cause hovac if used on the classes as it would just copy the pointer, not the data the d-pointer points to. For most of the classes we don't need a copy assignment operator anyway and in many classes it was broken before as many contain a pointer of some sort. Only for our Cacheset Container interfaces we define an explicit copy assignment operator which could later be implemented to copy the data from one d-pointer to the other if we need it. Git-Dch: Ignore
2015-05-22Merge branch 'debian/sid' into debian/experimentalMichael Vogt
Conflicts: apt-pkg/pkgcache.h debian/changelog methods/https.cc methods/server.cc test/integration/test-apt-download-progress
2015-04-28Move sysconf(_SC_OPEN_MAX); out of the for() loop to avoid unneeded syscallsMichael Vogt
2015-04-19ensure lists/ files have correct permissions after apt-cdrom addDavid Kalnischkies
Its a bit unpredictable which permissons and owners we will encounter on a CD-ROM (or a USB stick, as apt-cdrom is responsible for those too), so we have to ensure in this codepath as well that everything is nicely setup without waiting for a 'apt-get update' to fix up the (potential) mess.
2014-10-20test if TMPDIR is accessible before usingDavid Kalnischkies
Private temporary directories as created by e.g. libpam-tmpdir are nice, but they are also very effective in preventing our priviledge dropping to work as TMPDIR will be set to a directory only root has access to, so working with it as _apt will fail. We circumvent this by extending our check for a usable TMPDIR setting by checking access rights. Closes: 765951
2014-10-15set PR_SET_NO_NEW_PRIVS even if sandbox is disabledDavid Kalnischkies
Similar to 8f45798d532223adc378a4ad9ecfc64b3be26e4f, there is no harm to set this, even if we don't drop privileges. Git-Dch: Ignore
2014-10-13Fix backward compatiblity of the new pkgAcquireMethod::DropPrivsOrDie()Michael Vogt
Do not drop privileges in the methods when using a older version of libapt that does not support the chown magic in partial/ yet. To do this DropPrivileges() now will ignore a empty Apt::Sandbox::User. Cleanup all hardcoded _apt along the way.
2014-10-08Merge remote-tracking branch 'mvo/feature/acq-trans' into debian/experimentalMichael Vogt
2014-10-07set PR_SET_NO_NEW_PRIVS also if run as non-rootDavid Kalnischkies
Changing user and co works only as root, but can do some things for methods run as normal user as well to protect them from being able to call setuid binaries like sudo to elevate their privileges. Also uses a cheap trick now to build with old unsupporting kernels.
2014-10-07fix foldmarkers in fileutl.ccDavid Kalnischkies
Git-Dch: Ignore
2014-10-07Ignore EINVAL from prctl(PR_SET_NO_NEW_PRIVS)Michael Vogt
Ignore a EINVAL error here as it means that the kernel is too old to understand this option. We should not fail hard in this case but just ignore the error. closes: 764066
2014-10-07Rename DropPrivs() to DropPrivileges()Michael Vogt
Git-Dch: ignore
2014-09-29Adjust DestFile in ReverifyAfterIMS() to not include compr ExtensionMichael Vogt