| Age | Commit message (Collapse) | Author |
|---|
|
No effective change in behaviour, just simplifying and reusing code.
Suggested-By: Julian Andres Klode
Gbp-Dch: Ignore
|
|
No change in the logic itself, just dropping "== true", replacing "==
false" with not and moving lines around to make branches more obvious.
Suggested-By: Julian Andres Klode
Gbp-Dch: Ignore
|
|
We support dash-encoding even if we don't really work with files who
would need it as implementations are free to encode every line, but
otherwise a line starting with a dash must either be a header we parse
explicitly or the file is refused. This is against the RFC which says
clients should warn on such files, but given that we aren't expecting
any files with dash-started lines to begin with this looks a lot like a
we should not continue to touch the file as it smells like an attempt to
confuse different parsers by "hiding" headers in-between others.
The other slightly more reasonable explanation would be an armor header
key starting with a dash, but no existing key does that and it seems
unlikely that this could ever happen. Also, it is recommended that
clients warn about unknown keys, so new appearance is limited.
|
|
This is C++, so we can use a bit more abstraction to let the code
look a tiny bit nicer hopefully improving readability a bit.
Gbp-Dch: Ignore
|
|
RFC 4880 section 7.1 "Dash-Escaped Text" at the end defines that only
space and tab are allowed, so we should remove only these even if due to
use complaining (or now failing) you can't really make use of it.
Note that strrstrip was removing '\r\n\t ', not other whitespaces like
\v or \f and another big reason to do it explicitly here now is to avoid
that a future change adding those could have unintended consequences.
|
|
Having many rather similar implementations especially if one is exported
while others aren't (and the rest of it not factored out at all) seems
suboptimal.
|
|
The exploit for CVE-2019-3462 uses the fact that a Release.gpg file can
contain additional content beside the expected detached signature(s).
We were passing the file unchecked to gpgv which ignores these extras
without complains, so we reuse the same line-reading implementation we
use for InRelease splitting to detect if a Release.gpg file contains
unexpected data and fail in this case given that we in the previous
commit we established that we fail in the similar InRelease case now.
|
|
The warnings were introduced 2 years ago without any reports from the
wild about them actually appearing for anyone, so now seems to be an as
good time as any to switch them to errors.
This allows rewritting the code by failing earlier instead of trying to
keep going which makes the diff a bit hard to follow but should help
simplifying reasoning about it.
References: 6376dfb8dfb99b9d182c2fb13aa34b2ac89805e3
|
|
In C++17 `register` keyword was removed. Current gcc 8.1.0 produces
following warning if `-std=c++17` flag is used:
warning: ISO C++17 does not allow 'register' storage class specifier
[-Wregister]
GCC almost completely ignores `register` keyword, with rare exception of
`-O0` when additional copy from/to stack may be generated.
For simplicity of the codebase it is better to just remove this
problematic keyword where it is not strictly required.
See: http://en.cppreference.com/w/cpp/language/storage_duration
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
|
|
FileFd could be copied using the default copy constructor,
which does not work, and then causes code to crash.
|
|
Tagnames in configuration can include spaces (and other nasties) e.g. in
repository-specific configuration options due to Origin/Label
potentially containing a space. The configuration file format supports
parsing quoted as well as encoded spaces, but the output generated by
apt-config and other places which might be feedback into apt via
parsing (e.g. before calling apt-key in our gpgv method) do not quote
and hence produce invalid configuration files.
Changing the default to be an encoded tagname ensures that the output of
dump can be used as a config file, but other users might not expect
this so that is technically a backward-breaking change.
|
|
No user visible change expect for some years old changelog entries,
so we don't really need to add a new one for this…
Reported-By: codespell
Gbp-Dch: Ignore
|
|
Support subkeys and multiple keyrings in Signed-By options
See merge request apt-team/apt!27
|
|
Some post-invoke scripts install packages, which fails because
the environment variable is not set. This sets the variable for
all three kinds of scripts {pre,post-}invoke and pre-install-pkgs,
but we will only allow post-invoke at a later time.
Gbp-Dch: full
|
|
A user can specify multiple fingerprints for a while now, so its seems
counter-intuitive to support only one keyring, especially if this isn't
really checked or enforced and while unlikely mixtures of both should
work properly, too, instead of a kinda random behaviour.
|
|
Clock changes while apt is running can result in strange reports
confusing (and amusing) users. Sadly, to keep the ABI for now the
code is a bit more ugly than it would need to be.
|
|
IP addresses are by definition not a domain so in the best case the
requests will just fail; we can do better than that on our own.
|
|
Prompted-by: Jakub Wilk <jwilk@debian.org>
|
|
Reported-By: codespell & spellintian
Gbp-Dch: Ignore
|
|
Reported-By: gcc -Wdouble-promotion
Gbp-Dch: Ignore
|
|
This implements support for multi frame files while keeping
error checking for unexpected EOF working correctly. Files
with multiple frames are generated by pzstd, for example.
|
|
This is a simplified variant of the code for xz, adapted to support
multiple digit integers.
|
|
zstd is a compression algorithm developed by facebook. At level 19,
it is about 6% worse in size than xz -6, but decompression is multiple
times faster, saving about 40% install time, especially with eatmydata
on cloud instances.
|
|
Commit 89c4c588b275 ("fix from David Kalnischkies for the InRelease gpg
verification code (LP: #784473)") amended verification of cleartext
signatures by a check whether the file to be verified actually starts
with "-----BEGIN PGP SIGNATURE-----\n".
However cleartext signed InRelease files have been found in the wild
which use \r\n as line ending for this armor header line, presumably
generated by a Windows PGP client. Such files are incorrectly deemed
unsigned and result in the following (misleading) error:
Clearsigned file isn't valid, got 'NOSPLIT' (does the network require authentication?)
RFC 4880 specifies in 6.2 Forming ASCII Armor:
That is to say, there is always a line ending preceding the
starting five dashes, and following the ending five dashes. The
header lines, therefore, MUST start at the beginning of a line, and
MUST NOT have text other than whitespace following them on the same
line.
RFC 4880 does not seem to specify whether LF or CRLF is used as line
ending for armor headers, but CR is generally considered whitespace
(e.g. "man perlrecharclass"), hence using CRLF is legal even under
the assumption that LF must be used.
SplitClearSignedFile() is stripping whitespace (including CR) on lineend
already before matching the string, so StartsWithGPGClearTextSignature() is
adapted to use the same ignoring. As the earlier method is responsible
for what apt will end up actually parsing nowadays as signed/unsigned this
change has no implications for security.
Thanks: Lukas Wunner for detailed report & initial patch!
References: 89c4c588b275d098af33f36eeddea6fd75068342
Closes: 884922
|
|
LookupTag is a little helper to deal with rfc822-style strings we use in
apt e.g. to pass acquire messages around for cases in which our usual
rfc822 parser is too heavy. All the fields it had to deal with so far
were single line, but if they aren't it should really produce the right
output and not just return the first line. Error messages are a prime
candidate for becoming multiline as at the moment they are stripped of
potential newlines due to the previous insufficiency of LookupTag.
|
|
We have no speed problem with handling floats/doubles in our progress
handling, but that shouldn't prevent us from cleaning up the handling
slightly to avoid unclean casting to ints.
Reported-By: gcc -Wdouble-promotion -Wold-style-cast
|
|
The casts are useless, but the reports show some where we can actually
improve the code by replacing them with better alternatives like
converting whatever int type into a string instead of casting to a
specific one which might in the future be too small.
Reported-By: gcc -Wuseless-cast
|
|
gcc was warning about ignored type qualifiers for all of them due to the
last 'const', so dropping that and converting to static_cast in the
process removes the here harmless warning to avoid hidden real issues in
them later on.
Reported-By: gcc
Gbp-Dch: Ignore
|
|
gcc has problems understanding this construct and additionally thinks it
would produce multiple lines and stuff, so to keep using it isn't really
worth it for the few instances we have: We can just write the long form
there which works better.
Reported-By: gcc
Gbp-Dch: Ignore
|
|
Reported-By: gcc -Wsign-promo
|
|
The previous change moved running the proxy detection program from the
method to the main process, so it runs as root and not as _apt. This
brings it back into the sandbox.
Gbp-Dch: ignore
|
|
As a follow up to the last commit, let's replace APT_CONST
with APT_PURE everywhere to clean stuff up.
|
|
Functions marked with the const attribute may not inspect
any global memory. This includes targets of pointers or
references passed as arguments. A pure function however
is free to inspect memory, but may not have any side
effects.
The function StringSplit() was marked as const, but took
two references to strings. When the second one was passed
as a literal as in StringSplit(name, "::") the compiler
cleverly figured out that we only inspect the address of
"::" (since StringSplit is const) and thus optimized away
the "::" content.
While patching out individual broken uses of APT_CONST
would be possible, this is already the second case, and
there might be more, so let's redefine APT_CONST to use
the pure attribute, so we don't end up with the same
situation again in some time.
|
|
Regression-Of: 3317ad864c997f4897756c0a2989c4199e9cda62
|
|
We have support for an netrc-like auth.conf file since 0.7.25 (closing
518473), but it was never documented in apt that it even exists and
netrc seems to have fallen out of usage as a manpage for it no longer
exists making the feature even more arcane.
On top of that the code was a bit of a mess (as it is written in c-style)
and as a result the matching of machine tokens to URIs also a bit
strange by checking for less specific matches (= without path) first.
We now do a single pass over the stanzas.
In practice early adopters of the undocumented implementation will not
really notice the differences and the 'new' behaviour is simpler to
document and more usual for an apt user.
Closes: #811181
|
|
We used to fail on unreadable config/preferences/sources files, but at
least for sources we didn't in the past and it seems harsh to refuse to
work because of a single file, especially as the error messages are
inconsistent and end up being silly (like suggesting to run apt update
to fix the problem…).
LP: #1701852
|
|
Using different ways of opening files means we have different behaviour
and error messages for them, so by the same for all we can have more
uniformity for users and apt developers alike.
|
|
We can't allocate a pointer here, it would not get released - use
an object instead.
Gbp-Dch: ignore
|
|
This makes the code easier to read.
|
|
This makes it easier to see which headers includes what.
The changes were done by running
git grep -l '#\s*include' \
| grep -E '.(cc|h)$' \
| xargs sed -i -E 's/(^\s*)#(\s*)include/\1#\2 include/'
To modify all include lines by adding a space, and then running
./git-clang-format.sh.
|
|
Reported-By: codespell & spellintian
Gbp-Dch: Ignore
|
|
This makes it possible to write sensible auto detect scripts.
|
|
The error cases are just as unlikely as the memory leaks to ever cause
real problems, but lets play it safe for correctness.
Reported-By: scan-build & clang
Gbp-Dch: Ignore
|
|
Adopting this change in other frontends will require source changes as
well similar to our own changes in apt-private/.
|
|
|
|
POSIX.1-2008 gives us a range of *at calls to deal with files
including the unlinkat so we can remove a file from a directory
based on a path to the file relative to the directory.
(In our case here the path we have is just the filename)
We avoid changing directories in this way which e.g. fails if the
directory we started in no longer exists or is otherwise inaccessible.
Closes: 860738
|
|
As the proxy commands are not executed as root, a user can run into
permission errors (s)he isn't expecting – as our switching is an
implementation detail – so the error message in that case should really
be better than a generic "error code 100" sending the user in the wrong
direction as that implies the command was executed, but errored out.
Closes: 857885
|
|
Changes nothing on the program front and as the datatypes are
sufficently comparable fixes no bug either, but problems later on if we
ever change the types of those and prevent us using types which are too
large for the values we want to store waste (a tiny bit of) resources.
Gbp-Dch: Ignore
|
|
In the intended usecase where this serves as a hack there is no problem
with double/single quotes being present as we write it to a log file
only, but nowadays our calling of apt-key produces a temporary config
file containing this "setting" as well and suddently quoting is
important as the config file syntax is allergic to it.
So the fix is to ignore all quoting whatsoever in the input and just
quote (with singles) the option values with spaces. That gives us 99% of
the time the correct result and the 1% where the quote is an integral
element of the option … doesn't exist – or has bigger problems than a
log file not containing the quote. Same goes for newlines in values.
LP: #1672710
|
