summaryrefslogtreecommitdiff
path: root/apt-pkg/contrib
AgeCommit message (Collapse)Author
2014-05-30without a filename we can't stat pipesDavid Kalnischkies
EDSP code uses pipes opened via an FD as sources and later for those files modification times and filesize are read - but never really used again. The result we get from FileFd is probably wrong, but as we don't use it anyway, we just don't fallback if we have nothing to fallback to Git-Dch: Ignore
2014-05-27use free() instead of delete() when realloc is usedMichael Vogt
ContentsExtract::~ContentsExtract() needs to use free() because Data got allocated via realloc() Reported-By: clang -fsanitize=address -fno-omit-frame-pointer
2014-05-07Merge remote-tracking branch 'mvo/feature/apt-ftparchive-srccache2' into ↵Michael Vogt
debian/sid
2014-04-26fix FileFd::Size bitswap on big-endian architecturesAdam Conrad
gzip only gives us 32bit of size, storing it in a 64bit container and doing a 32bit flip on it has therefore unintended results. So we just go with a exact size container and let the flipping be handled by eglibc provided le32toh removing our #ifdef machinery. Closes: 745866
2014-04-16clear HitEof flag in FileFd::SeekDavid Kalnischkies
fseek and co do this to their eof-flags and it is more logic this way as we will usually seek away from the end (e.g. to re-read the file). The commit also improves the testcase further and adds a test for the binary compressor codepath (as gz, bzip2 and xz are handled by libraries) via the use of 'rev' as a 'compressor'.
2014-04-11deal with umask only if we really need to for mkstempDavid Kalnischkies
As the comment actually says: open() does the umask dance by itself, so we don't need to do it for it. We have to do it after mkstemp in Atomic though, so move it into the if. Also removes the "micro-optimisation" "FilePermissions == 600" as it doesn't trigger at the moment anyway as 600 != 0600.
2014-04-11don't double-count seeks in FileFd::Skip for bzip/xzDavid Kalnischkies
FileFd::Read already deals with the increase of the skipposition so that we as the caller in FileFd::Skip really shouldn't increase it, too.
2014-04-10improve umask/fchmod code readabilityMichael Vogt
2014-04-10Rename FileFd::Open() Perms to AccessModeMichael Vogt
Bug lp:#1304657 was caused by confusion around the name Perms. The new name AccessMode should make it clear that its not the literal file permissions but instead the AccessMode passed to open() (i.e. the umask needs to be applied)
2014-04-10Fix insecure file permissions when using FileFd with OpenMode::AtomicMichael Vogt
Commit 7335eebea6dd43581d4650a8818b06383ab89901 introduced a bug that caused FileFd to create insecure permissions when FileFd::Atomic is used. This commit fixes the permissions and adds a test. The bug is most likely caused by the confusing "Perm" parameter that is passed to Open() - its not the file permissions but intead the "mode" part of open/creat.
2014-04-04Implement CacheDB for source packages in apt-ftparchiveMichael Vogt
2014-04-01Add new Debug::RunScripts optionMichael Vogt
This debug option will display all scripts that are run by apts RunScripts and RunScriptsWithPkgs helpers.
2014-03-21mark optional (private) symbols as hiddenDavid Kalnischkies
This methods should not be used by anyone expect the library itself as they are helpers for the specific class and therefore perfect candidates for hidding. Git-Dch: Ignore
2014-03-21enable fvisibility=hidden for our private libraryDavid Kalnischkies
While it is a huge undertaking to enable it for our public libraries as basically everything we exported so far could be seen as public interface our private library is new and under our full control, so we can do whatever we like with it. The benefits are not that big in return of course, but it reduces the size a bit, so thats great nontheless. Git-Dch: ignore
2014-03-21continue reading in xz even if it outputs nothingDavid Kalnischkies
It can happen that content in our buffer is not enough to produce a meaningful output in which case no output is created by liblzma, but still reports that everything is okay and we should go on. The code assumes it has reached the end through if it encounters a null read, so this commit makes it so that it looks like this read was interrupted just like the lowlevel read() on uncompressed files could. It subsequently fixes the issue with that as well as until now our loop would still break even if we wanted it to continue on. (This bug triggers our usual "Hash sum mismatch" error) Reported-By: Stefan Lippers-Hollmann <s.L-H@gmx.de>
2014-03-15Fix handling of autoclosing for compressed files (Closes: #741685)Julian Andres Klode
AutoClose is both an argument in OpenDescriptor() and an enum. In commit 84baaae93badc2da7c1f4f356456762895cef278 code using the AutoClose parameter was moved to OpenDescriptorInternal(). In that function, AutoClose meant the enum value, so the check was always false.
2014-03-14fix test/integration/test-apt-helperMichael Vogt
2014-03-13refactor FileFd to hide some #ifdefsDavid Kalnischkies
They tend to be ugly to look at, so hide them. Git-Dch: Ignore
2014-03-13use liblzma-dev to provide xz/lzma supportDavid Kalnischkies
We have xz/lzma support for a while, but only via an external binary provided by xz-utils. Now that the Debian archive provides xz by default and dpkg pre-depends on the library provided by liblzma-dev we can switch now to use this library as well to avoid requiring an external binary. For now the binary is in a prio:required package, but this might change in the future. API wise it is quiet similar to bz2 code expect that it doesn't provide file I/O methods, so we piece this together on our own.
2014-03-13refactor setup of file opening via zlib/bz2 libDavid Kalnischkies
Git-Dch: Ignore
2014-03-13move fd duplication closer to the gz/bz2 open callsDavid Kalnischkies
Git-Dch: Ignore
2014-03-13support very long mtab entries in mountpoint discoveryDavid Kalnischkies
Old code limited lines to 250 characters which is probably enough for everybody, but who knows… It also takes care of device nodes which start with the same prefix.
2014-03-13no error for non-existing mountpoints in MountCdromDavid Kalnischkies
The mountpoint might be auto-generated by the mount command so pushing an error on the stack will confuse the following code and let it believe an unrecoverable error occured while potentially everything is okay. Same goes for umount as a non-existing mountpoint is by definition not mounted.
2014-03-13if mountpoint has a ".disk" directory it is mountedDavid Kalnischkies
Checking that parent-directory of mountpoint and mountpoint are on different devices is fine most of the time, but is too restrictive for our testcases and there shouldn't be anything wrong with 'normal' users copying disk-contents around either if they want to. We check for the existance of the ".disk/" directory now as this will not be present if the disk isn't 'mounted'. Disks doesn't need to have such a directory through, so for those we fall back to the old way of detecting mounted or not mounted.
2014-03-13follow method attribute suggestions by gccDavid Kalnischkies
Git-Dch: Ignore Reported-By: gcc -Wsuggest-attribute={pure,const,noreturn}
2014-03-13cleanup headers and especially #includes everywhereDavid Kalnischkies
Beside being a bit cleaner it hopefully also resolves oddball problems I have with high levels of parallel jobs. Git-Dch: Ignore Reported-By: iwyu (include-what-you-use)
2014-03-13move defines for version to macros.hDavid Kalnischkies
also adds namespaced attributes for good usage Git-Dch: Ignore
2014-03-13warning: cannot optimize loop, the loop counter may overflow ↵David Kalnischkies
[-Wunsafe-loop-optimizations] Git-Dch: Ignore Reported-By: gcc -Wunsafe-loop-optimizations
2014-03-13warning: useless cast to type A [-Wuseless-cast]David Kalnischkies
Git-Dch: Ignore Reported-By: gcc -Wuseless-cast
2014-03-13warning: cast from type A to type B casts away qualifiers [-Wcast-qual]David Kalnischkies
Git-Dch: Ignore Reported-By: gcc -Wcast-qual
2014-03-13warning: extra ‘;’ [-Wpedantic]David Kalnischkies
Git-Dch: Ignore Reported-By: gcc -Wpedantic
2014-03-13make doxygen more quiet, fix issues and disable latexDavid Kalnischkies
Git-Dch: Ignore
2014-03-13add default and override handling for Cnf::FindVectorDavid Kalnischkies
Automatically handle the override of list options via its parent value which can even be a comma-separated list of values. It also adds an easy way of providing a default for the list.
2014-03-12add hashsum support in apt-file download and add more testsMichael Vogt
2014-02-22Fix typos in documentation (codespell)Michael Vogt
2014-02-14simplify code some more to make reddit happyDavid Kalnischkies
Commit 6008b79adf1d7ea5607fab87a355d664c8725026 should have been guarded by "Git-Dch: Ignore", but it wasn't and I only noticed it with the Close message via deity thinking "hehe, I wonder if someone is gonna notice". Looks like someone did: hats off to reddit user itisOmegakai! Good to know that what I do isn't only monitored by goverments. :) As there is another instance of basically the same code we just factor out the code a bit and reuse, so its even cleaner and not only simpler. Reported-By: scan-build
2014-02-10simplify code to make compilers happyDavid Kalnischkies
Does the same as before, but is a bit simpler on the logic for humans as well as compilers. scan-build complained about it at least with: "Result of operation is garbage or undefined" Reported-By: scan-build
2014-01-26Merge remote-tracking branch 'donkult/debian/sid' into debian/sidMichael Vogt
Conflicts: apt-private/private-list.cc doc/po/de.po test/integration/framework
2014-01-16correct some style/performance/warnings from cppcheckDavid Kalnischkies
The most "visible" change is from utime to utimensat/futimens as the first one isn't part of POSIX anymore. Reported-By: cppcheck Git-Dch: Ignore
2014-01-16rework some code to fix some scan-build warningsDavid Kalnischkies
No visible functional changes, just code moved around and additional checks to eliminate impossible branches Reported-By: scan-build Git-Dch: Ignore
2014-01-05Merge remote-tracking branch 'donkult/feature/clientmergepdiffs' into ↵Michael Vogt
debian/experimental-no-abi-break
2013-12-23add basic tests for GetTempDir()Michael Vogt
2013-12-22factor GetTempDir outMichael Vogt
2013-12-22apt-pkg/contrib/gpgv.cc: use /tmp as fallback dirThomas Bechtold
if the directory given by $TMPDIR is not available, use /tmp as fallback.
2013-12-13allow ':' in GetListOfFilesInDirDavid Kalnischkies
run-parts doesn't allow this char in valid filenames, but we tend to have files with this character in e.g. /var/lib/apt/lists/ Git-Dch: Ignore
2013-11-30truncating /dev/null to zero is always successfulDavid Kalnischkies
Calling truncate on /dev/null can happen by the download methods if they are instructed to download a file to /dev/null (as testcases are only interested in the status code, but do not support HEAD requests yet) So just ignore truncate calls on the /dev/null file as it is always empty anyway, so truncating to zero isn't a problem. Git-Dch: Ignore
2013-11-29Merge remote-tracking branch 'mvo/debian/sid' into debian/sidMichael Vogt
Conflicts: apt-private/private-cmndline.cc
2013-11-29add "APT::String::Endswith" and automatic adding of ".list" in apt edit-sourceMichael Vogt
2013-11-28fix regression that APT::Keep-Fds is not honored (closes: #730490)Michael Vogt
2013-11-26add check when sources.list changedMichael Vogt